Items where department is "Mechanical and Aerospace Engineering"
- University Departments (73387)
- Faculty of Engineering (26610)
- Mechanical and Aerospace Engineering (4437)
- Faculty of Engineering (26610)
2024
Casares Fernández, Beatriz and Jalalvand, Meisam (2024) Effect of gauge length, cross sectional area and strain measurement methods on stiffness characterization of Fique natural fiber. Journal of Natural Fibers, 21 (1). 2433056. ISSN 1544-0478
Cavallari, Irene and Feng, Jinglang and Vasile, Massimiliano (2024) Semi-analytical attitude propagation of low-altitude Earth orbiting objects. Communications in Nonlinear Science and Numerical Simulation. 108550. ISSN 1007-5704
Kamenicky, Robin and Rahimi, Salaheddin and Violatos, Ioannis and Ritos, Konstantinos (2024) Numerical modelling of the water-quenching process validated through experiments with IN718 nickel-based superalloy. International Journal of Heat and Mass Transfer, 235. 126158. ISSN 0017-9310
Evangelisti, Adriano and Agati, Giuliano and Borello, Domenico and Mazzotta, Luca and Capobianchi, Paolo and Venturini, Paolo (2024) Numerical prediction of cavitation for a horizontal axis tidal turbine. Flow, Turbulence and Combustion. ISSN 1386-6184
Pender, K. and Yang, L. (2024) Waste glass fibre composites valorization using the fluidised bed : a global warming potential and economic assessment. Journal of Material Cycles and Waste Management. 108230. ISSN 1438-4957
Idarraga, Guillermo and Yang, Liu and Abad, Farhad and Huang, Yang and Dai, Saishuai and Xiao, Qing and Lotfian, Saeid and Brennan, Feargal (2024) Hyperelastic behaviour of elastomers for wave energy applications. Ocean Engineering, 313 (Part 3). 119652. ISSN 0029-8018
Sánchez, Luis and Vasile, Massimiliano and Sanvido, Silvia and Merz, Klaus and Taillan, Christophe (2024) Treatment of epistemic uncertainty in conjunction analysis with Dempster-Shafer theory. Advances in Space Research, 74 (11). pp. 5639-5686. ISSN 0273-1177
Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2024) Crack arrest analysis of components with compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures. ISSN 8756-758X (In Press)
Cao, Li and Wang, Maocai and Vasile, Massimiliano and Dai, Guangming (2024) Multi agent collaborative search algorithm with adaptive weights. Expert Systems, 41 (12). e13709. ISSN 0266-4720
Henry, Caoimhe and Castro, Alejandro Thompson and Belkessa, Mohamed and Rycroft, Ewan and Syntouka, Ioanna M. and Silva, Andreia and Sillars, Fiona and Oliveira, Mónica S.N. and Lockington, David (2024) Impact of temperature on ophthalmic viscosurgical devices and clinical implications : a pilot study. Journal of Cataract and Refractive Surgery, 50 (11). pp. 1173-1179. ISSN 1873-4502
Fischer, Jan-Steffan and Fasoulas, Stefanos and Bergmann, Nathalie and Ott, Antoinette and Pinto, Vera and Wilken, Jashcha and Udriot, Mathieu and Schulz, Leonard and Maddock, Christie (2024) A pathway for closing the knowledge gaps for a comprehensive life cycle assessment and ecodesign of space transportation systems : results of the 3rd Workshop on Life Cycle Assessment of Space Transportation Systems. University of Stuttgart.
Ekdi, Fatma Pelin and Kelly, Nicolas and McElroy, Lori Barbara and McQuillan, Jonathan and Sharpe, Tim and Statt, Rowena (2024) Zero Carbon Neighbourhoods : Creating Non-Complex Information from Complex Data. In: uSIM2024, 2024-11-25 - 2024-11-25, Edinburgh Climate Change Institute.
Kelly, Nicolas and Flett, Graeme Hamilton and Rida, Mohamad (2024) Forecasting the impacts of the electrification of heat, cooling and mobility in future net zero urban areas. In: uSIM2024, 2024-11-25 - 2024-11-25, Edinburgh Climate Change Institute.
Rida, Mohamad and Kelly, Nicolas (2024) Reducing energy consumption in urban office buildings with localised heating and heating set-point temperature reductions. In: uSIM2024, 2024-11-25 - 2024-11-25, Edinburgh Climate Change Institute.
Usman, Fidelis Jonah and Kelly, Nicolas (2024) Feasibility of electricity generation from abandoned oil wells in the Global South. In: uSIM2024, 2024-11-25 - 2024-11-25, Edinburgh Climate Change Institute.
Aljuaydi, Fahad and Abousnina, Rajab and Siddique, Rafat and Alajarmeh, Omar and Alajmi, Abdalrahman (2024) Microstructural analysis of geopolymer pastes contaminated with crude oil : impact on efflorescence, physical properties, and mechanical performance. Construction and Building Materials, 452. 138965. ISSN 0950-0618
Watson, Peter and Bonnieu, Sebastien Vincent and Anwar, Ali and Lappa, Marcello (2024) 3D waveforms and patterning behavior in thin monodisperse and multidisperse vertically-vibrated layers. Granular Matter. ISSN 1434-5021 (In Press)
Thomason, James and Carlin, Andrew and Yang, Liu (2024) Non-circular cross-section fibres for composite reinforcement—a review with a focus on flat glass fibres. Fibers, 12 (11). 98. ISSN 2079-6439
Alajmi, Abdalrahman R E and Kelly, Nick; (2024) Implementing Industry 4.0 tools for enhancing residential energy management : a case study of Kuwait. In: 2024 IEEE 18th International Conference on Application of Information and Communication Technologies (AICT). International Conference on Application of Information and Communication Technologies (AICT) . IEEE, ITA. ISBN 979-8-3503-8753-7
Wang, Yirui and Marchi, Pietro De and Vasile, Massimiliano (2024) A stochastic dynamic network model of the space environment. Other. arXiv, Ithaca, NY.
Ewe, Win Eng and Fudholi, Ahmad and Mustapha, Muslizainun and Solomin, E. and Yazdi, M.H. and Suyono, Tri and Asim, Nilofar and Nazri, Nurul Syakirah and Rajani, Ahmad and Darussalam, Rudi and Susatyo, Anjar and Sudibyo, Henny and Martoni and Sumarjo, Jojo and Abimanyu, Haznan and Sopian, Kamaruzzaman (2024) Energy-economic-environmental analysis of bifacial photovoltaic thermal (BPVT) solar air collector with jet impingement. Case Studies in Thermal Engineering, 63. 105257. ISSN 2214-157X
Rapach, Seonaid and Riccardi, Annalisa and Wheate, Rhonda (2024) Earth Observation technology's alignment with OHCHR indicators for strengthening human rights breach investigations and adjudication. Science and Justice, 64 (6). pp. 710-727. ISSN 1355-0306
Algaddaime, Talal F. and Hassan, Emadelddin and Stack, Margaret M. (2024) Investigating the performance of glass fibre-reinforced polymer (GFRP) in the marine environment for tidal energy : velocity, particle size, impact angle and exposure time effects. Lubricants, 12 (11). 375. ISSN 2075-4442
Walker, Joseph and Mills, Brandon and Javadi, Yashar and Sun, Yongle and Taraphdar, Pradeeptta Kumar and Sillars, Fiona and MacLeod, Charles Norman and Gachagan, Anthony and Pierce, Gareth (2024) Interpass peening impact on residual stress in wire-arc additive manufactured Ti 6Al-4V using phased-array ultrasonic testing. In: ASTM International Conference on Advanced Manufacturing 2024, 2024-10-27 - 2024-11-01, Hilton Atlanta.
Kaluthantrige Don, Mewantha Aurelio and Feng, Jinglang and Gil-Fernández, Jesús (2024) Convolutional-neural-network-based autonomous navigation of Hera mission around Didymos. Journal of Guidance, Control and Dynamics. pp. 1-14. ISSN 1533-3884
Parsonage, Ben and Maddock, Christie (2024) Solving multi-objective optimal control problems using a multiresolution approach. Journal of Guidance, Control, and Dynamics. ISSN 1533-3884
Al Asmar, Yolla and Belgiu, Mariana and Vargas Maretto, Raian and Ronzhin, Stanislav and Li, Luong Hanh and Budd Thiemann, Heidi and Dudley, Joseph and Ignjatovic, Danijela and Moser, Jade and Brempou, Christina-Soultana and Panagiotis, Partsinevelos and Petrakis, George and Fiore, Grazia Maria and Maddock, Christie and Bournou, Danai and Pavone, Rosario and Balenciaga, Intza and Kolehmainen, Mari and Kerkezian, Silva and Pantelaki, Irene (2024) The role of first degrees in encouraging students to enter the space sector : analysis by the ASTRAIOS project. In: 75th International Astronautical Congress, 2024-10-14 - 2024-10-18, MICO Convention Centre.
Maddock, Christie and Parsonage, Ben (2024) Multi-objective design optimisation and analysis of a crewed Earth-Mars transportation system using nuclear thermal propulsion. In: 75th International Astronautical Congress, 2024-10-14 - 2024-10-18, MICO Convention Centre.
Ewe, Win Eng and Flett, Graeme and Tuohy, Paul and Dassow, Jessica and Molnar, Ian and Flude, Stephanie and Mukherjee, Indrani and Burnside, Neil and Wang, Huachuan and Yang, Shangtong and Whittington, Daniel and Shipton, Zoe; (2024) Modelling of mine shaft thermal energy storage (MSTES) for district heating and grid balancing. In: Proceedings of uSim Conference 2024. International Building Performance Simulation Association, GBR. (In Press)
McKay, Innes and Vargas, Johnattan and Yang, Liu and Felfel, Reda M. (2024) A review of natural fibres and biopolymer composites : progress, limitations, and enhancement strategies. Materials, 17 (19). 4878. ISSN 1996-1944
Bryce, David and Thomason, James L. and Yang, Liu (2024) Thermoset droplet curing performance in the microbond test. Composite Interfaces, 31 (10). pp. 1247-1268. ISSN 0927-6440
Lypchanskyi, Oleksandr and Muszka, Krzysztof and Wynne, Bradley and Kawalko, Jakub and Śleboda, Tomasz (2024) Microstructural analysis of titanium alloys based on high-temperature phase reconstruction. Journal of Materials Science, 59 (40). pp. 18901-18915. ISSN 0022-2461
Walker, Joseph and Mills, Brandon and Javadi, Yashar and MacLeod, Charles and Sun, Yongle and Taraphdar, Pradeeptta Kumar and Ahmad, Bilal and Gurumurthy, Sundar and Ding, Jialuo and Sillars, Fiona (2024) Study of residual stress using phased array ultrasonics in Ti-6AL-4V wire-arc additively manufactured components. Sensors, 24 (19). 6372. ISSN 1424-8220
Fodde, Iosto and Feng, Jinglang and Vasile, Massimiliano and Gil-Fernández, Jesús (2024) Design of robust ballistic landings on the secondary of a binary asteroid. Journal of Guidance, Control, and Dynamics, 47 (10). pp. 2041-2057. ISSN 1533-3884
Sampath, Shabadini and Feng, Jinglang (2024) Deep Neural Network-based Robust Collision Avoidance Control of Space Manipulator for Active Debris Removal. In: International Astronautical Congress, 2024-10-14 - 2024-10-18, MiCo Milan Convention Centre.
Cowlishaw, Robert and Riccardi, Annalisa and Arulselvan, Ashwin (2024) Optimizing participant selection for fault-tolerant decision making in orbit using mixed integer linear programming. IEEE Transactions on Geoscience and Remote Sensing, 17. pp. 16961-16969. ISSN 0196-2892
Wang, Kaibao and Yang, Liu (2024) Investigation of fibre modified silica aerogel composites. International Journal of Materials Research, 115 (9). pp. 687-699. ISSN 1862-5282
Dores, Rodrigo and Oliveira, Mónica S.N. and Bimbo, Luis M. (2024) Microfluidic manufacture of composite fibers for biomedical applications. Advanced Materials Technologies. 2400976. ISSN 2365-709X
Powell, Cheyenne and Riccardi, Annalisa (2024) Explaining AI decisions in autonomous satellite scheduling via computational argumentation. In: SPAICE, 2024-09-17 - 2024-10-18, European Centre for Space Applications and Telecommunications (ECSAT), UK.
Mohammadi, Saeed and Bahman, Ammar M. (2024) Assessing residential sustainable energy autonomous buildings for hot climate applications. Journal of Cleaner Production, 471. 143410. ISSN 0959-6526
Esposito, Antonio and Lappa, Marcello and Allouis, Christophe (2024) A combustion-driven facility for hypersonic sustained flight simulation. Journal of Aerospace Science, Technologies & Systems, 103 (3). pp. 271-287. ISSN 0365-7442
Pitrolino, Katherine and Felfel, Reda and Roberts, George and Scotchford, Colin and Grant, David and Sottile, Virginie (2024) In vitro degradation of a chitosan-based osteochondral construct points to a transient effect on cellular viability. Biomedical Materials, 19 (5). 055025. ISSN 1748-605X
Marin Perez, Jonatan Emanuel and Comlekci, Tugrul and Gorash, Yevgen and MacKenzie, Donald (2024) Calibration of the DEM sliding friction and rolling friction parameters of a cohesionless bulk material. Particuology, 92. pp. 126-139. ISSN 2210-4291
Rizzuto, Francesco and Corney, Jonathan and Dempster, William and Tijsseling, Arris (2024) An improved positive displacement pump model accounting for suction cavitation. Journal of Pressure Vessel Technology, 146 (4). 041404. ISSN 0094-9930
Alajmi, Abdalrahman (2024) Twinning the future : Implementing digital twin technology in the optimisation of fibre-reinforced polymers. MATEC Web of Conferences, 401. 11005. ISSN 2261-236X
Aljuaydi, Fahad and Abousnina, Rajab and Alajarmeh, Omar and Alajmi, Abdalrahman (2024) The influence of fibres on the properties and sustainability of oil-impacted concrete. Sustainability, 16 (17). 7344. ISSN 2071-1050
Huang, Yang and Idarraga, Guillermo and Xiao, Qing and Yang, Liu and Dai, Saishuai and Abad, Farhad and Brennan, Feargal and Lotfian, Saeid; (2024) Numerical analysis of structured sheet material in flexible oscillating water column wave energy converter. In: Proceedings of the ASME 2024 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2024). American Society of Mechanical Engineers, SGP. ISBN 9780791887851
Parsonage, Ben and Maddock, Christie; (2024) Biased dyadic crossover for variable-length multi-objective optimal control problems. In: 2024 IEEE Congress on Evolutionary Computation (CEC). IEEE, JPN. ISBN 9798350308365
Sampath, Shabadini and Feng, Jinglang; (2024) Neural network-based synchronisation of free-floating space manipulator's joint motion and mother spacecraft's attitude for active debris removal. In: 2024 IEEE Congress on Evolutionary Computation, CEC 2024 - Proceedings. IEEE, JPN. ISBN 9798350308365
Sánchez, Luis and Rodríguez-Fernández, Victor and Vasile, Massimiliano; (2024) Robust classification with belief functions and deep learning applied to STM. In: 2024 IEEE Congress on Evolutionary Computation, CEC 2024 - Proceedings. IEEE, Piscataway, NJ. ISBN 9798350308365
Gil, Alvaro Francisco and Litteri, Walther and Rodriguez-Fernandez, Victor and Camacho, David and Vasile, Massimiliano (2024) Generative design of periodic orbits in the restricted three-body problem. Other. arXiv, Ithaca, NY.
Calabuig, Guillermo J. Dominguez and Wilson, Andrew and Bi, Sifeng and Vassile, Massimiliano and Sippel, Martin and Tajmar, Martin (2024) Environmental life cycle assessment of reusable launch vehicle fleets : large climate impact driven by rocket exhaust emissions. Acta Astronautica, 221. pp. 1-11. ISSN 0094-5765
Ferialdi, Hermes and Lappa, Marcello (2024) An experimental and numerical investigation into the sensitivity of Rayleigh-Bénard convection to heat loss through the sidewalls. Physica D: Nonlinear Phenomena, 464. 134190. ISSN 0167-2789
Parvar, Saeed and Chaparian, Emad and Tammisola, Outi (2024) General hydrodynamic features of elastoviscoplastic fluid flows through randomised porous media. Theoretical and Computational Fluid Dynamics, 38 (4). pp. 531-544. ISSN 1432-2250
Thomason, James and Xypolias, Georgios (2024) Investigation of the effects of scale and cure environment on the properties of vinyl ester polymer. Polymer, 307. 127344. ISSN 0032-3861
Chailad, Wichain and Yang, Liu (2024) Evaluation of slurry-eroded rubber surface using gloss measurement. Coatings, 14 (7). 915. ISSN 2079-6412
Habibi, Payvand and Algaddaime, Talal F. and Lotfian, Saeid and Stack, Margaret M. (2024) Investigating the effect of erosion induced surface roughness on tidal turbine blade performance : part 1. In: Tenth International Conference on Engineering Failure Analysis, 2024-07-07 - 2024-07-10.
McKelvie, James (2024) Seven derivations of the Lorentz transformations in Special Relativity are seen to be invalid. Journal of Physics & Optics Sciences, 6 (7). pp. 1-5. ISSN 2754-4753
Bryce, David and Yang, Liu and Moradi, Ramin and Thomason, James (2024) Development of bulk moulding compounds and extrusion compounding processes using recycled glass fibres. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.
Cowlishaw, Robert and Arulselvan, Ashwin and Riccardi, Annalisa (2024) Multi-objective optimisation strategy for on-orbit fault-tolerant decision making. In: 2024 IEEE World Congress on Computational Intelligence (WCCI), 2024-06-30 - 2024-07-05.
Kelly, Lewis and Yang, Liu and Liggat, John J. and Minty, Ross (2024) Investigation of the mechanical properties of carbon and glass fibres exposed to cryogenic temperatures and cryogenic cycling. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.
Malone, Beth and Reynolds, Oscar and Lunn, Rebecca and Thomason, James and Minty, Ross F. (2024) Comparison study of fixed and variable blade interfacial testing systems for the characterisation of thermoset composite. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.
Nixon, Paul and Wood, Martin and Yang, Liu and Minty, Ross F. (2024) An investigation of the mechanical properties of laser perforated CFRP composites for aerospace applications. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.
Thomason, James and Akrami, Roya and Yang, Liu (2024) A new method to prepare more representative coated glass fibres for screening and development of sizings at the laboratory scale. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.
Draper, Jonathan and Fritsche, Sebastian and Garrick, Andrew and Amancio-Filho, Sergio T. and Toumpis, Athanasios and Galloway, Alexander (2024) Exploring the boundaries of refill friction stir spot welding : influence of short welding times on joint performance. Welding in the World, 68 (7). pp. 1801-1813.
Marchetti, Francesco and Pietropolli, Gloria and Camerota Verdù, Federico Julian and Castelli, Mauro and Minisci, Edmondo (2024) Automatic design of interpretable control laws through parametrized genetic programming with adjoint state method gradient evaluation. Applied Soft Computing Journal, 159. 111654. ISSN 1568-4946
Khudhur, Faisal W.K. and Divers, Matthew and Wildman, Mark and MacDonald, John M. and Einsle, Joshua Franz (2024) Interrogation of ecotoxic elements distribution in slag and precipitated calcite through a machine larning-based approach aided by mass spectrometry. Advanced Sustainable Systems, 8 (7). 2300559.
Sampath, Shabadini and Feng, Jinglang (2024) Intelligent and robust control of space manipulator for sustainable removal of space debris. Acta Astronautica, 220. pp. 108-117. ISSN 0094-5765
Brightman, Edward and Robertson, Stuart and Lyth, Stephen and Sims, Ryan and Tuohy, Paul and Lue, Leo and Bae, Dowon and Berlouis, Leonard (2024) Flow battery activities at the University of Strathclyde. In: International Flow Battery Forum, 2024-06-24 - 2024-06-26, Hilton Hotel.
McKelvie, James (2024) Revisiting the matter of time dilation in special relativity. Journal of Physics & Optics Sciences, 6 (6). pp. 1-7. ISSN 2754-4753
McGhee, R. and Clarke, J.A. and Svehla, K. (2024) Development and application of an urban solar photovoltaic opportunity mapping tool. Heliyon, 10 (11). e32123. ISSN 2405-8440
Sofos, Filippos and Ritos, Konstantinos and Avramopoulos, Aggelos (2024) Editorial: Nanofluidics: computational methods and applications. Frontiers in Nanotechnology, 6. 1431198. ISSN 2673-3013
Castorrini, A. and Ortolani, A. and Minisci, E. and Campobasso, M. S. (2024) Opensource machine learning metamodels for assessing blade performance impairment due to general leading edge degradation. Journal of Physics: Conference Series, 2767 (5). 052055. ISSN 1742-6588
Macdonald, John R. and Stack, Margaret M. (2024) Generating composite material maps from numerical simulation of hailstone impact. Journal of Bio- and Tribo-Corrosion, 10 (3). 57. ISSN 2198-4220
Thomason, James and Xypolias, Georgios (2024) A study of the moisture absorption characteristics of vinyl ester polymer and unidirectional glass fibre vinyl ester laminates. Journal of Composites Science, 8 (6). 214. ISSN 2504-477X
Calautit, Katrina and Johnstone, Cameron (2024) Investigation of the integration of an oscillating aerofoil-based energy harvester into the building roof. Energy Reports, 11. pp. 4784-4811. ISSN 2352-4847
Morgado, Fábio and Abhishek Peddakotla, Sai and Graham, Julie and Vasile, Massimiliano and Fossati, Marco (2024) A multifidelity framework for aerothermodynamic modeling and simulation of destructive atmospheric entry. AIAA Journal, 62 (6). pp. 1988-2007. ISSN 0001-1452
Sword, J. Iain and Galloway, Alexander and Toumpis, Athanasios (2024) The effect of weld heat input on the microstructure and mechanical properties of wire arc additively manufactured 15-5PH stainless steel. The International Journal of Advanced Manufacturing Technology, 132 (11-12). pp. 5305-5314. ISSN 1433-3015
Abad, Farhad and Lotfian, Saeid and Dai, Saishuai and Zhao, Guangwei and Idarraga Alarcon, Guillermo and Yang, Liu and Huang, Yang and Xiao, Qing and Brennan, Feargal (2024) Experimental and computational analysis of elastomer membranes used in oscillating water column WECs. Renewable Energy, 226. 120422. ISSN 0960-1481
Alimhillaj, Parid and Minisci, Edmondo and Dallavedova, Matteo D.L. and Dorri, Altin (2024) Analogies between simple mechanical systems and electrohydraulic and electromechanical servomechanism. International Journal of Mechanics and Control, 25 (1). pp. 45-52. ISSN 1590-8844
Capobianchi, Paolo and Evangelisti, Adriano and Agati, Giuliano and Borello, Domenico and Venturini, Paolo (2024) Development and validation of a cavitation erosion model. In: 37th Scottish Fluid Mechanics Meeting 2024, 2024-05-29 - 2024-05-29, University of Edinburgh.
Manayil Santhosh, Balagopal and Lappa, Marcello (2024) Vibrationally driven particle formations in fluid systems with bimodal thermal inhomogeneities. Physics of Fluids, 36 (5). 053337. ISSN 1070-6631
Fayzi, Mohsen and Stack, Margaret M and Hashemi, Reza (2024) Advancements in modelling the tribocorrosion current. ChemElectroChem, 11 (10). pp. 1-9. e202400063. ISSN 2196-0216
Sword, J. Iain and Galloway, Alexander and Toumpis, Athanasios (2024) Analysis of environmental impact and mechanical properties of Inconel 625 produced using wire arc additive manufacturing. Sustainability, 16 (10). 4178. ISSN 2071-1050
Aljanadi, Ahmed and Oliveira, Monica S.N. and Lappa, Marcello (2024) Gravitational modes of convection in water liquid bridges. Physics of Fluids, 36. 054113. ISSN 1089-7666
England, Andrew and Toumpis, Athanasios and Gorash, Yevgen (2024) Specimen design for gigacycle fatigue testing of structural steel welded joints. Procedia Structural Integrity, 57. pp. 494-501. ISSN 2452-3216
Cartmell, Matthew (2024) The Terrestrial Measurement of Relativistic Frame-dragging. University of Strathclyde, Glasgow.
Shalwan, Abdullah and Alajmi, Abdalrahman and Yousif, Belal (2024) Theoretical study of the effect of orientations and fibre volume on the thermal insulation capability of reinforced polymer composites. Reviews on Advanced Materials Science, 63 (1). 20230190. ISSN 1605-8127
Draper, Jonathan and Fritsche, Sebastian and de Traglia Amancio-Filho, Sergio and Galloway, Alexander and Toumpis, Athanasios (2024) Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium. The International Journal of Advanced Manufacturing Technology, 131 (12). pp. 5867-5879. ISSN 1433-3015
Díaz Riofrío, Sebastián and Da Graça Marto, Simão and Ilioudis, Christos and Vasile, Massimiliano and Clemente, Carmine (2024) Performance analysis of ground-based long baseline radar distributed systems for space situational awareness. IET Radar Sonar and Navigation, 18 (4). pp. 586-597. ISSN 1751-8784
Wadge, Matthew D. and Agyakwa, Pearl A. and Felfel, Reda M. and Homer, Richard and Cooper, Timothy P. and Kudrynskyi, Zakhar R. and Lester, Edward and Ahmed, Ifty and Grant, David M. (2024) Self-assembled titanium-based macrostructures with hierarchical (macro-, micro-, and nano) porosities : a fundamental study. Materials and Design, 240. 112835. ISSN 0264-1275
Meng, Mingbin and Wang, Chunyu and Feng, Jinglang and Liu, Xiaodong (2024) Resonance capture and resonance jump of the space debris with high area-to-mass ratio in the synchronous orbit region. Acta Astronautica, 216. pp. 4-14. ISSN 0094-5765
Sommermann, Philipp and Cartmell, Matthew P. (2024) Dynamics of an omnidirectional pendulum energy harvester : a comparative analysis between numerical and experimental results. International Journal of Non-Linear Mechanics, 159. 104588. ISSN 0020-7462
Rapach, Seonaid and Riccardi, Annalisa and Liu, Bin and Bowden, James (2024) A taxonomy of earth observation data for sustainable finance. Journal of Climate Finance, 6. 100029. ISSN 2949-7280
Aljanadi, Ahmed Salahuldeen S and Lappa, Marcello; Fossati, Marco and Kontis, Kostantinos and Lappa, Marcello and Oliveira, Monica and Chaparian, Emad, eds. (2024) Buoyancy-driven flow instabilities in liquid bridges. In: Book of abstracts: UK Fluids Conference 2023. University of Strathclyde, GBR. ISBN 978-1-914241-69-7
Watson, Peter and Bonnieu, Sebastien Vincent and Lappa, Marcello; Fossati, Marco and Kontis, Kostantinos and Lappa, Marcello and Oliveira, Monica and Chaparian, Emad, eds. (2024) Convective states and patterning behavior in Lunar Regolith under the effect of vertical vibrations. In: Book of abstracts: UK Fluids Conference 2023. University of Strathclyde, GBR. ISBN 978-1-914241-69-7
Acosta, J.D. and Idarraga, Guillermo and Maimí, P. and Jalalvand, Meisam and Meza, J.M. (2024) Numerical modelling of multi-directional thin-ply carbon/glass hybrid composites with open holes under tension. Mechanics of Materials, 190. 104921. ISSN 0167-6636
Capobianchi, Paolo and Davoodi, Mahdi and Poole, Robert J. and Lappa, Marcello and Morozov, Alexander and Oliveira, Mónica S.N. (2024) Creeping thermocapillary motion of a Newtonian droplet suspended in a viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 324. 105168. ISSN 0377-0257
Waris, Wasim and Lappa, Marcello (2024) Thermographic analysis of topographically controlled Marangoni–Rayleigh–Bénard convection in a fluid with temperature-dependent properties. International Journal of Thermal Sciences, 196. 108718. ISSN 1290-0729
Hall, Christopher and Lo, Gloria J. and Hamilton, Andrea (2024) Water-vapour permeability of inorganic construction materials. Materials and Structures, 57 (2). 39. ISSN 1359-5997
Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) Why Space? : The Opportunity for Materials Science and Innovation. Satellite Applications Catapult, Didcot.
Capobianchi, Paolo; Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) Magnetic fluids in microgravity environments. In: Why Space? Satellite Applications Catapult, Didcot, pp. 68-69. ISBN 9781914241680
Lappa, Marcello; Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) New in-orbit self-assembly principles and manufacturing techniques. In: Why Space? Satellite Applications Catapult, Didcot, pp. 62-65. ISBN 9781914241680
Lappa, Marcello; Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) New methods for the transport and management of lunar regolith. In: Why Space? Satellite Applications Catapult, Didcot, pp. 131-133. ISBN 9781914241680
Lappa, Marcello and Carvil, Philip; Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) Access to the space environment and low earth orbit : what are the opportunities. In: Why Space? Satellite Applications Catapult, Didcot, pp. 14-21. ISBN 9781914241680
Lappa, Marcello and Kao, Andrew; Lappa, Marcello and Hamerton, Ian and Roberts, Peter C.E. and Kao, Andrew and Domingos, Marco and Soorghali, Hamid and Carvil, Philip, eds. (2024) Considerations for material properties and processes in space and their impact. In: Why Space? Satellite Applications Catapult, Didcot, pp. 24-28. ISBN 9781914241680
Ritchie, F. W. and Jana, B. D. and Zekos, I. and Stack, M. M. (2024) On the construction methodology of microabrasion-corrosion maps using theoretical approaches. Journal of Bio- and Tribo-Corrosion, 10 (1). 18. ISSN 2198-4220
McGurk, Michael and Stodieck, Olivia and Yuan, Jie (2024) Probabilistic aeroelastic analysis of high-fidelity composite aircraft wing with manufacturing variability. Composite Structures, 329. 117794. ISSN 0263-8223
Xiao, Xuran and Okorokov, Volodymyr and Mackenzie, Donald (2024) High cycle fatigue analysis with induced residual stress based on fracture mechanics. Procedia Structural Integrity, 52. pp. 111-121. ISSN 2452-3216
Chaparian, Emad (2024) Yielding to percolation : a universal scale. Journal of Fluid Mechanics, 980. A14. ISSN 0022-1120
Sanchez, Luis and Vasile, Massimiliano and Sanvido, Silvia and Mertz, Klaus and Taillan, Christophe (2024) Treatment of epistemic uncertainty in conjunction analysis with Dempster-Shafer theory. Other. arXiv, Ithaca, NY.
Pender, Kyle and Yang, Liu (2024) Glass fibre composites recycling using the fluidised bed : a comparative study into the carbon footprint in the UK. Sustainability, 16 (3). 1016. ISSN 2071-1050
Jiang, Jiaren and Islama, Md. Aminul and Xie, Yongsong and Stack, Margaret M. (2024) Some thoughts on modelling abrasion-corrosion : wear by hard particles in corrosive environments. Journal of Bio- and Tribo-Corrosion, 10 (1). 12. ISSN 2198-4220
Zhang, Yunshun and Wang, Wanshu and Zheng, Rencheng and Nakano, Kimihiko and Cartmell, Matthew P. (2024) A piezoelectric cantilever-asymmetric-conical-pendulum-based energy harvesting under multi-directional excitation. Journal of Sound and Vibration, 569. 118080. ISSN 0022-460X
Vasile, Massimiliano and Walker, Lewis and Campbell, Andrew and Marto, Simão and Murray, Paul and Marshall, Stephen and Savitski, Vasili (2024) Space object identification and classification from hyperspectral material analysis. Scientific Reports, 14. 1570. ISSN 2045-2322
Cowie, Raelene M. and Macri-Pellizzeri, Laura and McLaren, Jane and Sanderson, William J. and Felfel, Reda M. and Scotchford, Colin A. and Scammell, Brigitte E. and Grant, David M. and Sottile, Virginie and Jennings, Louise M. (2024) Functional performance of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold : a pre-clinical in vitro tribological study. Royal Society Open Science, 11 (1). 230431. ISSN 2054-5703
Dalla Vedova, Matteo D.L. and Alimhillaj, Parid and Minisci, Edmondo and Maggiore, Paolo; Guxho, Genti and Kosova Spahiu, Tatjana and Prifti, Valma and Gjeta, Ardit and Xhafka, Eralda and Sulejmani, Anis, eds. (2024) A simplified hydraulic capacity-sensitive fluid dynamics numerical model for monitoring aerospace electro-hydraulic actuators. In: Proceedings of the Joint International Conference. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, ALB, pp. 264-274. ISBN 9783031489334
Minisci, Edmondo and Dalla Vedova, Matteo D.L. and Alimhillaj, Parid and Baldo, Leonardo and Maggiore, Paolo; Guxho, Genti and Kosova Spahiu, Tatjana and Prifti, Valma and Gjeta, Ardit and Xhafka, Eralda and Sulejmani, Anis, eds. (2024) Machine learning based prognostics of on-board electromechanical actuators. In: Proceedings of the Joint International Conference. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, ALB, pp. 148-159. ISBN 9783031489334
Smith, Ewan and Bi, Sifeng and Feng, Jinglang and Cavallari, Irene and Vasile, Massimiliano (2024) Stochastic Bayesian model updating to reduce epistemic uncertainty in satellite attitude propagation. In: SciTech Forum 2024, 2024-01-08 - 2024-01-12.
Wilson, Callum J. and Vasile, Massimiliano and Feng, Jinglang and McNally, Keiran and Antón, Alfredo and Letizia, Francesca; (2024) Modelling future launch traffic and its effect on the LEO operational environment. In: AIAA SciTech 2024 Forum. American Institute of Aeronautics and Astronautics, USA. ISBN 9781624107115
Acciarini, Giacomo and Greco, Cristian and Vasile, Massimiliano (2024) Uncertainty propagation in orbital dynamics via Galerkin projection of the Fokker-Planck Equation. Advances in Space Research, 73 (1). pp. 53-63. ISSN 0273-1177
Chen, Furen and Zhang, Wei and Zhang, Kaihao and Yang, Qiaofa and Wang, Xiaoxiao and Zhou, Changyu (2024) Low cycle fatigue and creep-fatigue interaction behavior of 2.25CrMoV steel at high temperature. Journal of Materials Research and Technology, 28. pp. 3155-3165. ISSN 2238-7854
Deng, ZhongSheng and Xiao, Qing and Huang, Yang and Yang, Liu and Liu, YuanChuan (2024) A general FSI framework for an effective stress analysis on composite wind turbine blades. Ocean Engineering, 291. 116412. ISSN 0029-8018
2023
Dayarian, Shima and Yang, Liu and Majedi Far, Hojat (2023) Development of polyimide aerogel stock shapes through polyimide aerogel particles. Journal of Porous Materials, 30 (6). pp. 2101-2112. ISSN 1573-4854
Esposito, Antonio and Lappa, Marcello (2023) Perspectives and recent progresses on the simulation of the entry into the atmospheres of the outer ice giants. Journal of Aerospace Science, Technologies & Systems, 102. pp. 367-376. ISSN 0365-7442
Ishak, Muhammad Amir Aziat Bin and Ibrahim, Adnan and Fauzan, Mohd Faizal and Fazlizan, Ahmad and Ewe, Win Eng and Kazem, Hussein A. (2023) The effect of a reversed circular jet impingement on a bifacial module PVT collector energy performance. Case Studies in Thermal Engineering, 52. 103752. ISSN 2214-157X
Ma, Xinxing and Zhong, Yucai and Cao, Peng and Yuan, Jie and Zhang, Zhenguo (2023) Uncertainty quantification and sensitivity analysis for the self-excited vibration of a spline-shafting system. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 9 (4). 041104. ISSN 2332-9025
Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2023) High cycle fatigue life assessment of notched components with induced compressive residual stress. International Journal of Pressure Vessels and Piping, 206. 105069. ISSN 0308-0161
Boumchita, Wail and Feng, Jinglang (2023) The capture probability of Dawn into ground-track resonances with Vesta. Celestial Mechanics and Dynamical Astronomy, 136 (1). 3. ISSN 0923-2958
Marto, Simão da Graça and Vasile, Massimiliano and Campbell, Andrew and Murray, Paul and Marshall, Stephen and Savitski, Vasili (2023) Hyperspectral lightcurve inversion for attitude determination. Other. arXiv, Ithaca, NY.
Hou, Miaomiao and Aviv, Dorit and Chatterjee, Arnab and Teitelbaum, Eric and Rida, Mohamad and Meggers, Forrest and Khovalyg, Dolaana (2023) Resolving indoor shortwave and longwave human body irradiance variations for mean radiant temperature and local thermal comfort. Energy and Buildings, 301. 113581. ISSN 0378-7788
Yang, Juhua and Meng, Fanran and Zhang, Lixiao and McKechnie, Jon and Chang, Yuan and Ma, Bingran and Hao, Yan and Li, Xiang and Pender, Kyle and Yang, Liu and Leeke, Gary A. and Cullen, Jonathan M. (2023) Solutions for recycling emerging wind turbine blade waste in China are not yet effective. Communications Earth & Environment, 4 (1). 466. ISSN 2662-4435
Cao, Li and Wang, Maocai and Vasile, Massimiliano and Dai, Guangming and Wu, Huanqin (2023) An adaptive many-objective evolutionary algorithm based on decomposition with two archives and an entropy trigger. Engineering Optimization, 56 (11). pp. 1707-1747. ISSN 0305-215X
Zhang, Kunpeng and Zhang, Yao and Shi, Heng and Huang, Huang and Bi, Sifeng and Ye, Ji and Wang, Hongbo (2023) Escape-zone-based optimal evasion guidance against multiple orbital pursuers. IEEE Transactions on Aerospace and Electronic Systems, 59 (6). pp. 7698-7714. ISSN 0018-9251
Bi, Sifeng and Beer, Michael and Cogan, Scott and Mottershead, John (2023) Stochastic model updating with uncertainty quantification : an overview and tutorial. Mechanical Systems and Signal Processing, 204. 110784. ISSN 0888-3270
Boaro, Alessio and MacDowall, Gregor and Lappa, Marcello (2023) Symmetry properties and bifurcations of viscoelastic thermovibrational convection in a square cavity. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 108 (6). 065101. ISSN 2470-0053
Jones, B. and Nagy, P. and Minisci, E. and Fossati, M. (2023) A geometric sensitivity study for the aerodynamics of a strut-braced airframe. Aerospace Science and Technology, 142 (Part A). 108638. ISSN 1270-9638
Manayil Santhosh, Balagopal and Lappa, Marcello; Kumar, Mohit Hemanth and Bal, Sasmita and B.M., Girish, eds. (2023) Comparative assessment of numerical models for the simulation of thermovibrational-driven solid particle accumulation phenomena in microgravity conditions. In: Proceedings of First Joint International Conference on Advances in Mechanical & Aerospace Engineering (ATCON 2: ICAMAE 2023). Alliance University, IND, pp. 234-235. ISBN 9788196590949
Watson, Peter and Bonnieu, Sebastien Vincent and Lappa, Marcello; Kumar, Mohit Hemanth and Bal, Sasmita and B.M., Girish, eds. (2023) Effect of vertical and horizontal vibrations, vessel size and layer height on the fluidization of lunar regolith. In: Proceedings of First Joint International Conference on Advances in Mechanical & Aerospace Engineering (ATCON 2: ICAMAE 2023). Alliance University, IND, pp. 238-239. ISBN 9788196590949
Cartmell, Matthew P. (2023) Review of: "Speed of gravity: a simple experiment to test the general relativity theory". Qeios.
Watson, Peter and Bonnieu, Sebastien Vincent and Lappa, Marcello (2023) Fluidization and transport of vibrated granular matter : a review of landmark and recent contributions. Fluid Dynamics and Materials Processing, 20 (1). pp. 1-29. ISSN 1555-2578
England, Andrew and Toumpis, Athanasios and Gorash, Yevgen (2023) Very high cycle fatigue of welds : a review. Metals, 13 (11). 1860. ISSN 2075-4701
Cowlishaw, Robert and Riccardi, Annalisa and Arulselvan, Ashwin; Soille, P. and Lumnitz, S. and Albani, S., eds. (2023) Proof of optimality for a decentralised EO data processing architecture. In: Proceedings of the 2023 conference on Big Data from Space (BiDS’23). Publications Office of the European Union, AUT, pp. 389-392. ISBN 9789268086964
Rida, Mohamad and Abdelfattah, Mohamed and Alahi, Alexandre and Khovalyg, Dolaana (2023) Toward contactless human thermal monitoring : a framework for Machine Learning-based human thermo-physiology modeling augmented with computer vision. Building and Environment, 245. 110850. ISSN 0360-1323
Black, Scott MacDonald and Maclean, Craig and Hall Barrientos, Pauline and Ritos, Konstantinos and Kazakidi, Asimina (2023) Reconstruction and validation of arterial geometries for computational fluid dynamics using multiple temporal frames of 4D flow-MRI magnitude Images. Cardiovascular Engineering and Technology, 14 (5). pp. 655-676. ISSN 1869-4098
Carson, C.G. and Cummings, J.L. and Poole, R.J. and Zografos, K. and Oliveira, M.S.N. (2023) Multiple inlet sudden expansion flow of power-law fluids. Journal of Non-Newtonian Fluid Mechanics, 320. 105102. ISSN 0377-0257
Li, Jianxun and Wang, Minghang and Li, Ying and Chen, Haofeng and Zhang, Tairui and Wang, Weiqiang (2023) On the evaluation of uniaxial tensile and fracture properties of Ti‐6Al‐4V by spherical indentation tests with different calculation models. Fatigue and Fracture of Engineering Materials and Structures, 46 (10). pp. 4053-4072. ISSN 8756-758X
Razali, Siti Nuraisyah and Ibrahim, Adnan and Fazlizan, Ahmad and Fauzan, Mohd Faizal and Ajeel, Raheem K. and Zairah Ahmad, Emy and Ewe, Win Eng and Kazem, Hussein A. (2023) Performance enhancement of photovoltaic modules with passive cooling multidirectional tapered fin heat sinks (MTFHS). Case Studies in Thermal Engineering, 50. 103400. ISSN 2214-157X
de Carvalho, Willian S. and Draper, Jonathan and Terrazas-Monje, Talina and Toumpis, Athanasios and Galloway, Alexander and Amancio-Filho, Sergio T. (2023) Fatigue life assessment and fracture mechanisms of additively manufactured metal-fiber reinforced thermoplastic hybrid structures produced via ultrasonic joining. Journal of Materials Research and Technology, 26. pp. 5716-5730. ISSN 2238-7854
Arredondo-Galeana, Abel and Yeter, Baran and Abad, Farhad and Ordóñez-Sánchez, Stephanie and Lotfian, Saeid and Brennan, Feargal (2023) Material selection framework for lift-based wave energy converters using fuzzy TOPSIS. Energies, 16 (21). 7324. ISSN 1996-1073
Cowlishaw, Robert and Boumghar, Red and Arulselvan, Ashwin and Riccardi, Annalisa (2023) Automating and decentralising satellite-based emergency mapping. In: 5th International Conference on Blockchain Computing and Applications, 2023-10-24 - 2023-10-26.
Manayil Santhosh, Balagopal and Lappa, Marcello (2023) Vibrationally-driven solid particle attractors in non-uniformly heated systems. In: UK Fluids Conference 2023, 2023-10-17 - 2023-10-19.
Wilson, Andrew Ross and Vasile, Massimiliano (2023) The space sustainability paradox. Journal of Cleaner Production, 423. 138869. ISSN 0959-6526
Manayil Santhosh, Balagopal and Lappa, Marcello (2023) On the relationship between solid particle attractors and thermal inhomogeneities in vibrationally-driven fluid-particle systems. Physics of Fluids, 35 (10). 103316. ISSN 1070-6631
Brough, Euan and Nash, David and Kazemi Amiri, Abbas Mehrad and Couturier, Philippe and Reis, Vitor Luiz; (2023) Development of a test rig for improved estimation of structural damping of wind turbine composite materials. In: Proceedings of ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2023. Proceedings of ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2023 . ASME, USA. ISBN 9780791887141
Calautit, Katrina and Johnstone, Cameron (2023) State-of-the-art review of micro to small-scale wind energy harvesting technologies for building integration. Energy Conversion and Management: X, 20. 100457. ISSN 2590-1745
Darm, Paul and Marchetti, Francesco and Garcia, Gérald and Redondo, Paloma Maestro and Riccardi, Annalisa and Fernández, Alberto González (2023) Leveraging language models semantic similarity capabilities to facilitate information reuse in system engineering. In: 74th International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Centre.
Laino, Maria Anna and Vasile, Massimiliano (2023) Assembly and disassembly dynamics of modular solar power satellite. In: 74th International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Centre.
Wilson, Callum and Vasile, Massimiliano and Feng, Jinglang and McNally, Keiran and Anton, Alfredo and Letizia, Francesca (2023) Quantifying the induced and encountered risk of space missions. In: 74th International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Centre.
Powell, Cheyenne and Riccardi, Annalisa (2023) Question answering over knowledge graphs for explainable satellite scheduling. In: International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Center.
Rapach, Seonaid and Riccardi, Annalisa (2023) A framework for mapping earth observation capabilities to the OHCHR indicators. In: 74th International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Centre.
Boumchita, Wail and Jinglang, Feng (2023) Semi-analytical estimation of the probability of capture into ground-track resonances of Dawn around Vesta. In: 74th International Astronautical Congress, 2023-10-02 - 2023-10-06, Heydar Aliyev Centre.
Dhopade, Priyanka and Nieke, Philipp and Mankelow, Cody and Reguyal, Febelyn and Morris, Adam and Wilson, Andrew (2023) Life cycle assessment as a tool for sustainable space activity in Aotearoa New Zealand. Advances in Space Research, 72 (7). pp. 2936-2947. ISSN 0273-1177
Kajak, Karl Martin and Maddock, Christie and Frei, Heike and Schwenk, Kurt (2023) Domain randomisation and CNN-based keypoint-regressing pose initialisation for relative navigation with uncooperative finite-symmetric spacecraft targets using monocular camera images. Advances in Space Research, 72 (7). pp. 2824-2844. ISSN 0273-1177
Kaluthantrige, Aurelio and Feng, Jinglang and Gil-Fernández, Jesús (2023) CNN-based image processing algorithm for autonomous optical navigation of Hera mission to the binary asteroid Didymos. Acta Astronautica, 211. pp. 60-75. ISSN 0094-5765
Sánchez, Luis and Vasile, Massimiliano (2023) Intelligent decision support for collision avoidance manoeuvre planning under uncertainty. Advances in Space Research, 72 (7). pp. 2627-2648. ISSN 0273-1177
Walker, Lewis and Vasile, Massimiliano (2023) Space debris remediation using space-based lasers. Advances in Space Research, 72 (7). pp. 2786-2800. ISSN 0273-1177
Wang, Yirui and Vasile, Massimiliano (2023) Intelligent selection of NEO deflection strategies under uncertainty. Advances in Space Research, 72 (7). pp. 2676-2688. ISSN 0273-1177
Wilson, Andrew Ross and Vasile, Massimiliano (2023) Life cycle engineering of space systems : preliminary findings. Advances in Space Research, 72 (7). pp. 2917-2935. ISSN 0273-1177
Barbosa, Filipe and Dueñas-Pamplona, Jorge and Abreu, Cristiano S. and Oliveira, Mónica S. N. and Lima, Rui A. (2023) Numerical model validation of the blood flow through a microchannel hyperbolic contraction. Micromachines, 14 (10). 1886. ISSN 2072-666X
Johnston, Daniel and Cartmell, Matthew (2023) A novel approximation method for the solution of weakly nonlinear coupled systems. Nonlinear Dynamics, 111 (17). pp. 16271-16292. ISSN 1573-269X
Villalba, Miguel E. and Daneshi, Masoud and Chaparian, Emad and Martinez, D. Mark (2023) Atypical plug formation in internal elastoviscoplastic fluid flows over non-smooth topologies. Journal of Non-Newtonian Fluid Mechanics, 319. 105078. ISSN 0377-0257
Pender, Kyle and Yang, Liu (2023) Glass fibre composites recycling using the fluidised bed : a study into the economic viability in the UK. Clean Technologies and Recycling, 3 (3). pp. 221-240.
Huang, Yang and Xiao, Qing and Idarraga, Guillermo and Yang, Liu and Dai, Saishuai and Abad, Farhad and Brennan, Feargal and Lotfian, Saeid; (2023) Numerical analysis of flexible tube wave energy converter using CFD-FEA method. In: ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers (ASME), AUS. ISBN 978-0-7918-8690-8
Kelly, N. J. and Flett, G. H. and Hand, J. W. (2023) Developing a statistical electric vehicle charging model and its application in the performance assessment of a sustainable urban charging hub. Journal of Building Performance Simulation. pp. 1-20. ISSN 1940-1493
da Graça Marto, Simão and Díaz Riofrío, Sebastián and Ilioudis, Christos and Clemente, Carmine and Vasile, Massimiliano (2023) Satellite manoeuvre detection with multistatic radar. Journal of the Astronautical Sciences, 70 (5). 36. ISSN 0021-9142
García-Orozco, Selef and Vargas-Gutiérrez, Gregorio and Ordóñez-Sánchez, Stephanie and Silva, Rodolfo (2023) Using multi-criteria decision making in quality function deployment for offshore renewable energies. Energies, 16 (18). 6533. ISSN 1996-1073
McGhee, Raheal (2023) GOMap : a Python-developed GIS opportunity mapping tool for renewable energy technologies. SoftwareX, 23. 101511. ISSN 2352-7110
Huang, Yang and Xiao, Qing and Idarraga Alarcon, Guillermo and Yang, Liu and Dai, David and Abad, Farhad and Brennan, Feargal and Lotfian, Saeid; Ilzarbe, Jesús María Blanco, ed. (2023) A CFD-FEM analysis for Anaconda WEC with mooring lines. In: Proceedings of the 15th European Wave and Tidal Energy Conference 2023. EWTEC, Bilbao.
England, A. and Toumpis, A. and Gorash, Y. (2023) Ultrasonic fatigue testing of structural steel welded joints. In: BSSM 17th International Conference on Advances in Experimental Mechanics, 2023-08-30 - 2023-09-01, Glasgow University Union, University of Glasgow.
Rida, Mohamad and Frijns, Arjan and Khovalyg, Dolaana (2023) Modeling local thermal responses of individuals : validation of advanced human thermo-physiology models. Building and Environment, 243. 110667. ISSN 0360-1323
Walsh, Angélica and Cóstola, Daniel and Hensen, Jan L.M. and Labaki, Lucila Chebel (2023) Multi-criterial performance-based climatic zoning of Brazil supported by local experts. Building and Environment, 243. 110591. ISSN 0360-1323
Izadi, Mahdi and Chaparian, Emad and Trudel, Elizabeth and Frigaard, Ian (2023) Squeeze cementing of micro-annuli : a visco-plastic invasion flow. Journal of Non-Newtonian Fluid Mechanics, 319. 105070. ISSN 0377-0257
Wadge, Matthew D. and Lowther, Morgan and Cooper, Timothy P. and Reynolds, William J. and Speidel, Alistair and Carter, Luke N. and Rabbitt, Daisy and Kudrynskyi, Zakhar R. and Felfel, Reda M. and Ahmed, Ifty and Clare, Adam T. and Grant, David M. and Grover, Liam M. and Cox, Sophie C. (2023) Tailoring absorptivity of highly reflective Ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes. Journal of Materials Processing Technology, 317. 117985. ISSN 0924-0136
Huang, Yang and Xiao, Qing and Idarraga, Guillermo and Yang, Liu and Dai, David and Abad, Farhad and Brennan, Feargal and Lotfian, Saeid (2023) Novel computational fluid dynamics-finite element analysis solution for the study of flexible material wave energy converters. Physics of Fluids, 35 (8). 083611. ISSN 1070-6631
Wadge, Matthew D. and McGuire, Jamie and Thomas, Kathryn G. and Stuart, Bryan W. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2023) Developing alkaline titanate surfaces for medical applications. International Materials Reviews, 68 (6). pp. 677-724. ISSN 0950-6608
Boumchita, Wail and Feng, Jinglang (2023) Leveraging the ground-track resonance capture and escape for precise and efficient orbital transfers. In: 2023 AAS/AIAA Astrodynamics Specialist Conference, 2023-08-13 - 2023-08-17, Big Sky Resort.
Avanzini, Giulio and Zona, Danilo and Marchetti, Francesco and Minisci, Edmondo (2023) Approximate estimates of orbit transfer cost for efficient mission analysis and design. In: 2023 AAS/AIAA Astrodynamics Specialist Conference, 2023-08-13 - 2023-08-17, Big Sky Resort.
Zhang, Wenjiao and Neville, Robin and Zhang, Dayi and Yuan, Jie and Scarpa, Fabrizio and Lakes, Roderic (2023) Bending of kerf chiral fractal lattice metamaterials. Composite Structures, 318. 117068. ISSN 0263-8223
Cavallari, Irene and Feng, Jinglang and Bi, Sifeng and Vasile, Massimiliano (2023) Semi-analytical long-term attitude propagation. In: 2023 AAS/AIAA Astrodynamics Specialist Conference, 2023-08-13 - 2023-08-17, Big Sky Resort.
Laino, Maria Anna and Vasile, Massimiliano (2023) Optimal orbits for a recycling station supporting in-orbit recycling. In: 2023 AAS/AIAA Astrodynamics Specialist Conference, 2023-08-13 - 2023-08-17, Big Sky Resort.
Wang, Yirui and Wilson, Callum and Vasile, Massimiliano (2023) Multi-layer temporal network model of the space environment. In: 2023 AAS/AIAA Astrodynamics Specialist Conference, 2023-08-13 - 2023-08-17, Big Sky Resort.
Cummings, Joshua and Carson, Christopher and Poole, R.J. and Zografos, Konstantinos and Oliveira, M. (2023) Flows of Non-Newtonian Fluids in a Sudden Expansion with Multiple Inlets: A Numerical Study. In: XIX Conference on Rheology, 2023-07-29 - 2023-08-04.
Carlin, Andrew Thomas and Yang, Liu and Thomason, James (2023) Flat glass fibres : a study on flat glass fibres and their injection moulded polyamide 6,6 composites. In: The 23rd International Conference on Composite Materials, 2023-07-31 - 2023-08-04, The ICC Belfast.
Darm, Paul and Miceli-Barone, Antonio Valerio and Cohen, Shay B. and Riccardi, Annalisa; (2023) Knowledge base question answering for space debris queries. In: Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics. Association for Computational Linguistics, Toronto, pp. 487-499. ISBN 9781959429685
Medina-Bañuelos, Esteban F. and Marín-Santibáñez, Benjamín M. and Chaparian, Emad and Owens, Crystal E. and McKinley, Gareth H. and Pérez-González, José (2023) Rheo-PIV of yield-stress fluids in a 3D-printed fractal vane-in-cup geometry. Journal of Rheology, 67 (4). pp. 891-908. ISSN 1520-8516
Wei, Caisheng and Li, Yang and Yin, Zeyang and Zhou, Liang and Feng, Jinglang (2023) On finite-time anti-saturated proximity control with a tumbling non-cooperative space target. Space: Science & Technology, 3. 0045.
Ahmad, Bilal and Almaskari, Fahad and Sheikh-Ahmad, Jamal and Deveci, Suleyman and Khan, Kamran (2023) Thermomechanical modeling of material flow and weld quality in the friction stir welding of high-density polyethylene. Polymers, 15 (15). 3230. ISSN 2073-4360
Bozkurt, Murat and Nash, David (2023) Stress linearization application of oblique nozzles with welded pad reinforcement in cylindrical pressure vessels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (5). pp. 1642-1654. ISSN 0954-4062
Naseri, Ali and Moradi, Ramin and Cioccolanti, Luca and Subiantoro, Alison (2023) Impact of the lubricant on a modified revolving vane expander (M-RVE) in an organic Rankine cycle system. Energies, 16 (14). 5340. ISSN 1996-1073
Lo, Gloria J. (2023) Water vapour adsorption on moisure buffering building materials. In: 2nd International Conference on Moisture in Buildings 2023 (ICMB23), 2023-07-03 - 2023-07-04, University College London.
Reguis, Antoine and Tunzi, Michele and Vand, Behrang and Tuohy, Paul and Currie, John (2023) Energy performance of Scottish public buildings and its impact on the ability to use low-temperature heat. Energy and Buildings, 290. 113064. ISSN 0378-7788
Sword, James and Galloway, Alexander and Toumpis, Athanasios (2023) An environmental impact comparison between wire + arc additive manufacture and forging for the production of a titanium component. Sustainable Materials and Technologies, 36. e00600. ISSN 2214-9937
Wilson, Andrew R. and Vasile, Massimiliano and Maddock, Christie and Baker, Keith (2023) Implementing life cycle sustainability assessment for improved space mission design. Integrated Environmental Assessment and Management, 19 (4). pp. 1002-1022. ISSN 1551-3777
Ewe, Win Eng and Sopian, Kamaruzzaman and Mohanraj, Murugesan and Fudholi, Ahmad and Asim, Nilofar and Ibrahim, Adnan (2023) Exergetic performance of jet impingement bifacial photovoltaic-thermal solar air collector with different packing factors and jet distributions. Heat Transfer Engineering. ISSN 0145-7632
Thomason, James L. (2023) Flat glass fibres : the influence of fibre cross section shape on composite micromechanics and composite strength. Composites Part A: Applied Science and Manufacturing, 169. 107503. ISSN 1359-835X
Porter, Fiona A. M. and Scaife, Anna M. M. (2023) MiraBest : a data set of morphologically classified radio galaxies for machine learning. RAS Techniques and Instruments, 2 (1). pp. 293-306. ISSN 2752-8200
Idarraga, Guillermo and Yang, Liu and Abad, Farhad and Huang, Yang and Dai, David and Xiao, Qing and Lotfian, Saeid and Brennan, Feargal; (2023) Hyperelastic modelling of elastomers for wave energy convertors. In: Proceedings of the ASME 2023 42st International Conference on Ocean, Offshore and Arctic Engineering. ASME, AUS.
Garbacz, C. and Morgado, F. and Fossati, M. (2023) Characterization of nonequilibrium shock interaction in CO2-N2 flows over double-wedges with respect to Mach number and geometry. Physics of Fluids, 35 (6). 066120. ISSN 1070-6631
Boumchita, Wail and Feng, Jinglang and Neishtadt, Anatoly (2023) Semi-analytical estimation of the probability of capture into 1:1 ground-track resonance of a low-thrust spacecraft around an asteroid. In: 12th International Conference on Guidance, Navigation & Control Systems (GNC) & 9th International Conference on Astrodynamics Tools and Techniques (ICATT), 2023-06-12 - 2023-06-16.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) Business models for virtual power plants and their impact on economic operation. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) Business models for virtual power plants and their impact on economic operation [poster & e-slides]. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) Enhanced virtual power plant design and implementation lessons. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) Enhanced virtual power plant design and implementation lessons [poster & e-slides]. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) The impact of forecasting accuracy on the economic performance of flexibility provision [poster & e-slides]. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Flett, Graeme and Bingham, John (2023) The impact of forecasting accuracy on the economic performance of flexibility provision. In: 27th International Conference on Electricity Distribution (CIRED 2023), 2023-06-12 - 2023-06-15, Rome.
Kaluthantrige, Aurelio and Feng, Jinglang and Gil-Fernández, Jesús (2023) Pose estimation of chaotic motion of Didymos' moon using CNN-based image processing algorithm. In: 12th International Conference on Guidance, Navigation & Control Systems (GNC), 2023-06-12 - 2023-06-16.
Fernández Silva, B. and Jackson, M. and Fox, K. and Wynne, B. P. (2023) Tool for automatic macrozone characterization from EBSD data sets of titanium alloys. Journal of Applied Crystallography, 56 (Pt 3). pp. 737-749. ISSN 0021-8898
Lappa, Marcello and Boaro, Alessio and Ferialdi, Hermes; Oliveira, Monica S. N. and Zografos, Konstantinos and Poole, Robert J. and Ellero, Marco and Anderson, Patrick D., eds. (2023) Viscoelastic thermally-driven flows in normal and microgravity conditions : laminar and turbulent states. In: 21st International Workshop on Numerical Methods for Non-Newtonian Flows. University of Strathclyde, Glasgow, p. 41. ISBN 9781914241420
Bowles, Micah and Tang, Hongming and Vardoulaki, Eleni and Alexander, Emma L. and Luo, Yan and Rudnick, Lawrence and Walmsley, Mike and Porter, Fiona and Scaife, Anna M. M. and Slijepcevic, Inigo Val and Adams, Elizabeth A. K. and Drabent, Alexander and Dugdale, Thomas and Gürkan, Gülay and Hopkins, Andrew M. and Jimenez-Andrade, Eric F. and Leahy, Denis A. and Norris, Ray P. and Rahman, Syed Faisal ur and Ouyang, Xichang and Segal, Gary and Shabala, Stanislav S. and Wong, O. Ivy (2023) Radio Galaxy Zoo EMU : Towards a Semantic Radio Galaxy Morphology Taxonomy. Monthly Notices of the Royal Astronomical Society, 522 (2). pp. 2584-2600. ISSN 0035-8711
Campobasso, M. Sergio and Castorrini, Alessio and Ortolani, Andrea and Minisci, Edmondo (2023) Probabilistic analysis of wind turbine performance degradation due to blade erosion accounting for uncertainty of damage geometry. Renewable and Sustainable Energy Reviews, 178. 113254. ISSN 1879-0690
Houston, Gemma and Capobianchi, Paolo and Oliveira, Monica S. N. (2023) Flow focusing with miscible fluids in microfluidic devices. Physics of Fluids, 35 (5). 052015-1. ISSN 1089-7666
MacDonald Black, Scott and Maclean, Craig and Hall Barrientos, Pauline and Ritos, Konstantinos and McQueen, Alistair and Kazakidi, Asimina (2023) Calibration of patient-specific boundary conditions for coupled CFD models of the aorta derived from 4D flow-MRI. Frontiers in Bioengineering and Biotechnology, 11. 1178483. ISSN 2296-4185
Bao, Hongchen and Shen, Jun and Peng, Heng and Liu, Yinghua and Chen, Haofeng (2023) Elastic core concept for modified Bree problems considering in-phase and out-of-phase loading conditions. International Journal of Pressure Vessels and Piping, 202. 104913. ISSN 0308-0161
Parker, Robert and Capobianchi, Paolo and Lappa, Marcello (2023) Competing particle attractee in liquid bridges. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 381 (2245). 20220302. ISSN 1471-2962
Kaluthantrige, Aurelio and Feng, J. and Gil-Fernández, J. (2023) Pose estimation of Didymos' moon using CNN-based image processing algorithm for HERA mission. In: 8th IAA Planetary Defense Conference (PDC) 2023, 2023-04-03 - 2023-04-07.
Powell, Cheyenne and Berquand, Audrey and Riccardi, Annalisa (2023) Natural language processing for explainable satellite scheduling. In: SPACEOPS 2023, 2023-03-06 - 2023-03-10.
Abad, F. and Lotfian, S. and Dai, S. and Zhao, G. and Alarcon, G. and Yang, L. and Huang, Y. and Xiao, Q. and Brennan, F.; (2023) Experimental study on inflatable circular diaphragms used in the oscillating water column wave energy converter. In: Proceedings of the 9th International Conference on Marine Structures (MARSTRUCT 2023). Taylor & Francis, SWE.
Thomason, James L and Xypolias, Georgios (2023) The effect of environmental ageing on the interphase in glass fibre - vinyl ester composites. Composite Interfaces, 30 (4). pp. 377-391. ISSN 0927-6440
Good, Michael and Da Graca Oliveira Marto, Simao Pedro and Cartmell, Matthew P. and Vasile, Massimiliano (2023) The Interaction of Structural Dynamics with the Orbital Mechanics of Solar Power Satellites : Final Report. University of Strathclyde, Glasgow.
Lappa, Marcello and Inam, Saad (2023) Large eddy simulation of three-dimensional hybrid forced-buoyancy convection in channels with a step. International Journal of Heat and Mass Transfer, 202 (4). 123767. ISSN 0017-9310
Peddakotla, S.A. and Yuan, J. and Minisci, E. and Vasile, M. and Fossati, M. (2023) A numerical approach to evaluate temperature-dependent peridynamics damage model for destructive atmospheric entry of spacecraft. The Aeronautical Journal, 127 (1309). pp. 398-427. ISSN 2059-6464
Thomason, James (2023) The influence of fibre cross section shape and fibre surface roughness on composite micromechanics. Micro, 3 (1). pp. 353-368. ISSN 2673-8023
Yuan, Jie and Salles, Loïc and Nowell, David and Schwingshackl, Christoph (2023) Influence of mesoscale friction interface geometry on the nonlinear dynamic response of large assembled structures. Mechanical Systems and Signal Processing, 187. 109952. ISSN 0888-3270
Boumghar, Red and Riccardi, Annalisa and Guzman, Cesar and Ameen, Shazhad (2023) Orbit decentralized autonomous organization using blockchain-based consensus mechanisms. In: SPACEOPS 2023, 2023-03-06 - 2023-03-10.
Nigar, Farah and Johnston, Amy-Louise and Smith, Jacob and Oakley, William and Islam, Md Towhidul and Felfel, Reda and Grant, David and Lester, Edward and Ahmed, Ifty (2023) Production of nano hydroxyapatite and Mg-Whitlockite from biowaste-derived products via continuous flow hydrothermal synthesis : a step towards circular economy. Materials, 16 (6). 2138. ISSN 1996-1944
Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer and Milne, Lewis (2023) Ultrasonic fatigue testing of structural steel S275JR+AR with insights into corrosion, mean stress and frequency effects. Materials, 16 (5). 1799. ISSN 1996-1944
Crewdson, Georgie and Lappa, Marcello (2023) Three-dimensional solid particle self-assembly in thermovibrational flow : the case with unidirectional temperature gradient and concurrent vibrations. Physics of Fluids, 35 (2). 023323. ISSN 1089-7666
Vian, Jessica Enara and Garvey, Brian and Tuohy, Paul Gerard (2023) Towards a synthesized critique of forest-based 'carbon fix' strategies. Climate Resilience and Sustainability, 2 (1). e248. ISSN 2692-4587
Powell, Cheyenne and Riccardi, Annalisa; Huang, Joshua Zhexue and Pan, Yi and Hammer, Barbara and Khan, Muhammad Khurram and Xie, Xing and Cui, Laizhong and He, Yulin, eds. (2023) Abstract argumentation for explainable satellite scheduling. In: 2022 IEEE 9th International Conference on Data Science and Advanced Analytics (DSAA). IEEE, CHN, pp. 1-10. ISBN 9781665473309
Thomason, James and Xypolias, Georgios (2023) Hydrothermal ageing of glass fibre reinforced vinyl ester composites : a review. Polymers, 15 (4). 835. ISSN 2073-4360
Dayarian, Shima and Far, Hojat Majedi and Yang, Liu (2023) Macroporous polyimide aerogels : a comparison between powder microparticles synthesized via wet gel grinding and emulsion processes. Langmuir, 39 (5). pp. 1804-1814. ISSN 0743-7463
Parsonage, Ben and Maddock, Christie (2023) A multi-fidelity model management framework for multi-objective aerospace design optimisation. Frontiers in Aerospace Engineering, 2. 1046177.
Hall, Christopher and Lo, Gloria J and Hamilton, Andrea (2023) Measuring water vapour permeability using remote-reading humidity sensors. Measurement Science and Technology, 34 (2). 027004. ISSN 0957-0233
Macleod, Kenneth and Nash, David h. and Bow, David r. and Ma, Le (2023) Influence of heat treatments on the microstructure and mechanical properties of two fine Mg-Li-Y alloy wires for bioresorbable applications. Advanced Engineering Materials, 25 (4). 2201164. ISSN 1527-2648
Vasile, Massimiliano and Walker, Lewis and Dunphy, R. David and Zabalza, Jaime and Murray, Paul and Marshall, Stephen and Savitski, Vasili (2023) Intelligent characterisation of space objects with hyperspectral imaging. Acta Astronautica, 203. pp. 510-534. ISSN 0094-5765
Minty, Ross F. and Yang, Liu and Thomason, James L. (2023) The dependence of interfacial shear strength on temperature and matrix chemistry in glass fibre epoxy composites. Composites Part A: Applied Science and Manufacturing, 164. 107303. ISSN 1359-835X
Vasile, Massimiliano and Manzi, Matteo (2023) Polynomial stochastic dynamical indicators. Celestial Mechanics and Dynamical Astronomy, 135 (1). 4. ISSN 0923-2958
Wilson, Andrew R. and Oqab, Haroon B. and Vasile, Massimiliano (2023) UK Space Energy Initiative : environmental impact assessment scoping review of an offshore rectenna in Scotland. Journal of the British Interplanetary Society, 76 (1). pp. 29-40. ISSN 0007-084X
Wilson, Andrew R. and Vasile, Massimiliano and Oqab, Haroon B. (2023) Life cycle assessment of the UK Space Energy Initiative technology roadmap. Journal of the British Interplanetary Society, 76 (1). pp. 18-28. ISSN 0007-084X
Fodde, Iosto and Feng, Jinglang and Riccardi, Annalisa and Vasile, Massimiliano (2023) Robust stability and mission performance of a CubeSat orbiting the didymos binary asteroid system. Acta Astronautica, 203. pp. 577-591. ISSN 0094-5765
Waris, Wasim and Lappa, Marcello (2023) Patterning behavior of hybrid buoyancy-Marangoni Convection in inclined layers heated from below. Fluids, 8 (1). 12. ISSN 2311-5521
Comlekci, Tugrul and Marin Perez, Jonatan and Milne, Lewis and Gorash, Yevgen and MacKenzie, Donald (2023) Structural steel crack propagation experimental and numerical analysis. Procedia Structural Integrity, 42 (2022). pp. 694-701. ISSN 2452-3216
Milne, Lewis Andrew and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2023) Frequency effects in ultrasonic fatigue testing (UFT) of Q355B structural steel. Procedia Structural Integrity, 42. pp. 623-630. ISSN 2452-3216
Wang, Xiaoxiao and Yang, Jie and Chen, Haofeng and Zhiyuan, M.A. and Xuan, Fuzhen (2023) Effect of constraint on cyclic plastic behaviours of cracked bodies and the establishment of unified constraint correlation. European Journal of Mechanics - A/Solids, 97. 104857. ISSN 0997-7538
2022
Huang, Xuxing and Yang, Bin and Li, Shuang and Feng, Jinglang and Masdemont, Josep J. (2022) Design of Ganymede-synchronous frozen orbit around Europa. Mathematics, 11 (1). 41. ISSN 2227-7390
Esposito, Antonio and Lappa, Marcello and Pagliara, Rocco and Spada, Gennaro (2022) A mixed radiative-convective technique for the calibration of heat flux sensors in hypersonic flow. Fluid Dynamics and Materials Processing, 18 (2). pp. 189-203. ISSN 1555-2578
R. Velasquez, Sara T. and Jang, Daseul and Jenkins, Peter and Liu, Peng and Yang, Liu and Korley, LaShanda and Bruns, Nico (2022) Peptide-reinforced amphiphilic polymer conetworks. Advanced Functional Materials, 32 (51). 2207317. ISSN 1616-301X
Laurati, Marco and Tassieri, Manlio and Espinosa, Gabriel and Oliveira, Mónica S. N. and Joseph, Pierre (2022) Exploring the mechanical properties of soft materials at multiple length scales. Frontiers is Physics, 10. 1111099. ISSN 2296-424X
Boaro, Alessio and Lappa, Marcello (2022) On the competition of transverse and longitudinal modes of Marangoni convection in a three-dimensional layer of viscoelastic fluid. Physics of Fluids, 34 (12). 123103. ISSN 1070-6631
Wadge, Matthew D. and Bird, Matthew A. and Sankowski, Andrzej and Constantin, Hannah and Fay, Michael W. and Cooper, Timothy P. and O'Shea, James N. and Khlobystov, Andrei N. and Walsh, Darren A. and Johnson, Lee R. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2022) Nanostructured, alkaline titanate‐converted, and heat‐treated Ti6Al4V microspheres via wet‐chemical alkaline modification and their ORR electrocatalytic response. Advanced Materials Interfaces, 10 (5). 2201523. ISSN 2196-7350
Miraux, Loïs and Wilson, Andrew Ross and Dominguez Calabuig, Guillermo J. (2022) Environmental sustainability of future proposed space activities. Acta Astronautica, 200. pp. 329-346. ISSN 0094-5765
Wang, Hai-Shu and Xin, Xiaosheng and Hou, Xiyun and Feng, Jinglang (2022) Stability of the planar synchronous full two-body problem—The approach of periodic orbits. Communications in Nonlinear Science and Numerical Simulation, 114. 106638. ISSN 1007-5704
Wilson, Andrew R. and Oqab, Haroon B. and Vasile, Massimiliano (2022) UK Space Energy Initiative : environmental impact assessment scoping review of an offshore rectenna in Scotland. In: 19th Reinventing Space Conference, 2022-11-28 - 2022-11-29.
Wilson, Andrew R. and Vasile, Massimiliano and Oqab, Haroon B. (2022) Life cycle assessment of the UK Space Energy Initiative technology roadmap. In: 19th Reinventing Space Conference, 2022-11-28 - 2022-11-29.
Esposito, Antonio and Allouis, Christophe and Lappa, Marcello; (2022) A new facility for hypersonic flow simulation driven by a high velocity oxygen fuel gun. In: Proceedings of the 33th Congress of the International Council of the Aeronautical Sciences (ICAS). International Council of the Aeronautical Sciences, Bonn.
Flett, Graeme and Tuohy, Paul (2022) Towards a high-resolution, stochastic, domestic energy demand model to assess the local network impact of heat and transport electrification. In: uSIM 2022 Conference, 2022-11-25 - 2022-11-25, University of Strathclyde.
McGhee, R and Clarke, J A and Svehla, K; (2022) GOMap - Geospatial Opportunity Mapping tool : an open-source GIS application for urban scale renewable energy generation. In: Proceedings of uSim Conference 2022 : 3rd uSim Conference of IBPSA-Scotland. IBPSA, Glasgow, Scotland, pp. 1-8.
Boumghar, Red and Riccardi, Annalisa and Ameen, Shazhad and Arulselvan, Ashwin and Minisci, Edmondo (2022) Decentralized and automated business logic in a future MBSE blockchain ecosystem. In: Model Based Space Systems and Software Engineering - MBSE2022, 2022-11-22 - 2022-11-24, Airbus Leadership Academy.
Minty, Ross F. and Martinez de Luca, Diego and Jalalvand, Meisam (2022) Interfacial Characterization of Natural Fique Fibre/Polypropylene Composites Using Single Fibre Fragmentation Test (SFFT). In: SAMPE Conference 2022, 2022-11-15 - 2022-11-17, Handelskammer Hamburg,.
Chen, Xiaohui and Liu, Yang and Zhu, Lin and Lang, Lang and Chen, Haofeng (2022) Shakedown limit of elbow pipe under coupled cyclic thermal-mechanical loading based on the LMM. International Journal of Pressure Vessels and Piping, 199. 104747. ISSN 0308-0161
Fritsche, S. and Draper, J. and Toumpis, A. and Galloway, A. and Amancio-Filho, S.T. (2022) Refill friction stir spot welding of AlSi10Mg alloy produced by laser powder bed fusion to wrought AA7075-T6 alloy. Manufacturing Letters, 34. pp. 78-81. ISSN 2213-8463
Gimelshein, Sergey F. and Wysong, Ingrid J. and Fangman, Alexander J. and Andrienko, Daniil A. and Kunova, Olga V. and Kustova, Elena V. and Morgado, Fabio and Garbacz, Catarina and Fossati, Marco and Hanquist, Kyle M. (2022) Kinetic and continuum modeling of high-temperature air relaxation. Journal of Thermophysics and Heat Transfer, 36 (4). pp. 870-893. ISSN 0887-8722
Wilson, Callum and Riccardi, Annalisa (2022) Enabling intelligent onboard guidance, navigation, and control using reinforcement learning on near-term flight hardware. Acta Astronautica, 199. pp. 374-385. ISSN 0094-5765
Crewdson, Georgie and Evans, Matthew and Lappa, Marcello (2022) Two-dimensional vibrationally-driven solid particle structures in non-uniformly heated fluid containers. Chaos, 32 (10). p. 103119. 103119. ISSN 1054-1500
Bowles, Micah and Tang, Hongming and Vardoulaki, Eleni and Luo, Yan and Rudnick, Lawrence and Walmsley, Mike and Porter, Fiona and Scaife, Anna M. M. and Slijepcevic, Inigo Val and Segal, Gary (2022) A new task : deriving semantic class targets for the physical sciences. In: Advances in Neural Information Processing Systems, 2023-12-10 - 2023-12-16.
Marlin, Theresa C. and Gentgen, Chloe and Fodde, Iosto and Groshaus, Julieta and Hennig, Anthony and Hudson, Ben and Lin, Angela and Pabarcius, Lucas and Smith, Eric and Vilchis Lagunes, Nathalie and Wall, Mitchell and Jiang, Rebecca and Mahendrakar, Trupti and Shimane, Yuri and Christuraj, Edwin and Gammill, Mariah E.; (2022) ORACLE : A sample-return mission to Titan. In: ASCEND 2022. American Institute of Aeronautics and Astronautics Inc. (AIAA), USA. ISBN 9781624106620
Thomason, James L. (2022) The influence of fibre cross section shape on critical fibre length and composite strength. In: Aachen Reinforced!, 2022-10-17 - 2022-10-19, RWTH Aachen University.
Lappa, Marcello (2022) Incompressible flows and the Boussinesq approximation : 50 years of CFD. Comptes Rendus Mécanique, 350 (S1). ISSN 1631-0721
Darm, Paul and Berquand, Audrey and Mansilla, Luis and Riccardi, Annalisa; (2022) A system engineering recommendation system based on language similarity analysis : an application to space systems conceptual design. In: 10th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2022). European Space Agency, Noordwijk. The Netherlands.
Boumghar, Redouane and Ameen, Shazad and Riccardi, Annalisa and Arulselvan, Ashwin and Minisci, Edmondo and Bui Long, AnhToan and Pizarro De La Iglesia, José (2022) Decentralized trust management in concurrent design using blockchain. In: 10th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2022), 2022-10-05 - 2022-10-07, Digital Event.
Wilson, Andrew Ross and Vasile, Massimiliano (2022) The Strathclyde concurrent and collaborative design studio : past, present and future. In: 10th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2022), 2022-10-05 - 2022-10-07, Digital Event.
Shen, Jun and Ma, Zhiyuan and Chen, Haofeng (2022) Shakedown and ratcheting analysis of Printed Circuit Heat Exchangers under multiple cyclic mechanical and thermal loads. International Journal of Pressure Vessels and Piping, 199. 104723. ISSN 0308-0161
Zhao, Yanlin and Yang, Jianhong and Faes, Matthias G.R. and Bi, Sifeng and Wang, Yao (2022) The sub-interval similarity : a general uncertainty quantification metric for both stochastic and interval model updating. Mechanical Systems and Signal Processing, 178. 109319. ISSN 0888-3270
Dai, Yanwei and Qin, Fei and Liu, Yinghua and Chen, Haofeng (2022) Influences of material mismatch on interface crack tip field in three layered creeping materials. Engineering Failure Analysis, 140. 106523. ISSN 1350-6307
Wang, Xiaoxiao and Ma, Zhiyuan and Chen, Haofeng and Liu, Yinghua and Shi, Duoqi and Yang, Jie (2022) Creep rupture limit analysis for engineering structures under high-temperature conditions. International Journal of Pressure Vessels and Piping, 199. 104763. ISSN 0308-0161
Chaparian, Emad and Owens, Crystal E. and McKinley, Gareth H. (2022) Computational rheometry of yielding and viscoplastic flow in vane-and-cup rheometer fixtures. Journal of Non-Newtonian Fluid Mechanics, 307. 104857. ISSN 0377-0257
Connelly, D. P. and Bull, J. M. and Flohr, A. and Schaap, A. and Koopmans, D. and Blackford, J. C. and White, P. R. and James, R. H. and Pearce, C. and Lichtschlag, A. and Achterberg, E. P. and de Beer, D. and Roche, B. and Li, J. and Saw, K. and Alendal, G. and Avlesen, H. and Brown, R. and Borisov, S. M. and Böttner, C. and Cazenave, P. W. and Chen, B. and Dale, A. W. and Dean, M. and Dewar, M. and Esposito, M. and Gros, J. and Hanz, R. and Haeckel, M. and Hosking, B. and Huvenne, V. and Karstens, J. and Le Bas, T. and Leighton, T. G. and Linke, P. and Loucaides, S. and Matter, J. M. and Monk, S. and Mowlem, M. C. and Oleynik, A. and Omar, A. M. and Peel, K. and Provenzano, G. and Saleem, U. and Schmidt, M. and Schramm, B. and Sommer, S. and Strong, J. and Falcon Suarez, I. and Ungerboeck, B. and Widdicombe, S. and Wright, H. and Yakushev, E. (2022) Assuring the integrity of offshore carbon dioxide storage. Renewable and Sustainable Energy Reviews, 166. 112670. ISSN 1879-0690
Kaluthantrige, Aurelio and Feng, Jinglang and Gil-Fernández, Jesús (2022) Pseudorange measurement and Sun phase angle estimation using CNN-based Image Processing algorithm for Hera mission. In: AMOS 2022, 2022-09-27 - 2022-09-30.
Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Li, Hongjun (2022) Influence of aluminium alloy grade on dissimilar friction stir welding of aluminium to AZ31B. In: Joint International Symposium on Friction Stir Welding and Processing, 2022-09-28 - 2022-09-30, Leuphana University.
Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Li, Hongjun (2022) Optimisation of friction stir welding parameters using the Taguchi technique for dissimilar joining of AA5083 to copper. In: Joint International Symposium on Friction Stir Welding and Processing, 2022-09-28 - 2022-09-30, Leuphana University.
da Graça Marto, Simão and Vasile, Massimiliano and Diaz Riofrio, Sebastian and Ilioudis, Christos and Clemente, Carmine (2022) Survey of manoeuvre detection methods and their application to multi-static radar. In: AMOS 2022, 2022-09-27 - 2022-09-30.
Fodde, Iosto and Feng, Jinglang and Gil-Fernández, Jesús and Vasile, Massimiliano (2022) Binary asteroid landing trajectory design from a self-stabilized terminator orbit considering parametric uncertainties. In: 73rd International Astronautical Congress 2022, 2022-09-18 - 2022-09-22.
Kardassi, Maria N. and Graham, Julie and Peddakotla, Sai Abhishek and Jenkins, Ciarán and Wilson, Andrew and Vasile, Massimiliano (2022) Initial conditions of a novel CubeSat during atmospheric re-entry. In: 73rd International Astronautical Congress, 2022-09-18 - 2022-12-22.
Laino, Maria Anna and Wilson, Andrew Ross and Vasile, Massimiliano and Paoli, Roberto and Gales, Catalin (2022) A transport network for in-orbit recycling exploiting natural dynamics. In: 73rd International Astronautical Congress, 2022-09-18 - 2022-12-22.
Gray, Lewis and Leitch, Ewan and Graham, Julie and Wilson, Andrew and Vasile, Massimiliano (2022) STRATHcube : a CubeSat against space debris. In: 73rd International Astronautical Congress, 2022-09-18 - 2022-12-22.
Hall, Iain and Powell, Cheyenne and Riccardi, Annalisa (2022) Constraint programming for scheduling the operations of STRATHcube : a nanosatellite for detecting space debris. In: 73rd International Astronautical Congress (IAC), 2022-09-18 - 2022-10-22, Paris Convention Centre.
Peddakotla, Sai Abhishek and Morgado, Fábio and Thillaithevan, Dilaksan and O'Driscoll, Danielle and Santer, Matthew and Maddock, Christie and Vasile, Massimiliano and Fossati, Marco (2022) Multi-fidelity and multi-disciplinary approach for the accurate simulation of atmospheric re-entry. In: 73rd International Astronautical Congress 2022, 2022-09-18 - 2022-09-22.
Powell, Cheyenne and Riccardi, Annalisa (2022) On-board re-planning of an earth observation satellite for maximisation of observation campaign goals. In: 73rd International Astronautical Congress (IAC), 2022-09-18 - 2022-10-22, Paris Convention Centre.
Boumchita, Wail and Feng, Jinglang (2022) Probability of spacecraft's 1:1 ground-track resonance capture around an asteroid with the adiabatic invariant theory. In: 73rd International Astronautical Congress (IAC), 2022-09-18 - 2022-10-22, Paris Convention Centre.
Inam, Saad and Lappa, Marcello (2022) Hybrid forced-buoyancy convection in a channel with a backward facing step. International Journal of Heat and Mass Transfer, 194. 122963. ISSN 0017-9310
Walsh, Angélica and Cóstola, Daniel and Labaki, Lucila Chebel (2022) Performance-based climatic zoning method for building energy efficiency applications using cluster analysis. Energy, 255. 124477. ISSN 1873-6785
Manayil Santhosh, B. and Tufekci, M. and Salles, L. and Scarpa, F. and Yuan, J. (2022) Flutter mitigation of turbofan blades using viscoelastic patches. In: Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, 2022-09-12 - 2022-09-14, Leuven Belgium.
Filippi, Gianluca and Vasile, Massimiliano and Patelli, Edoardo and Fossati, Marco; (2022) Generative optimisation of resilient drone logistic networks. In: 2022 IEEE Congress on Evolutionary Computation, CEC 2022 - Conference Proceedings. 2022 IEEE Congress on Evolutionary Computation, CEC 2022 - Conference Proceedings . IEEE, ITA. ISBN 9781665467087
Wang, Yirui and Vasile, Massimiliano; (2022) Intelligent decision support system for planetary defense under mixed aleatory/epistemic uncertainties. In: 2022 IEEE Congress on Evolutionary Computation, CEC 2022 - Conference Proceedings. 2022 IEEE Congress on Evolutionary Computation, CEC 2022 - Conference Proceedings . IEEE, ITA, pp. 1-9. ISBN 9781665467087
Filippi, Gianluca and Patelli, Edoardo and Vasile, Massimiliano and Fossati, Marco (2022) Multi-layer resilience optimisation for next generation drone logistic networks. In: European Safety and Reliability Conference, 2022-08-28 - 2022-09-02, TU Dublin.
Bao, Hongchen and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2022) Shakedown analysis and assessment method of four-stress parameters Bree-type problems. International Journal of Mechanical Science, 229. p. 107518. 107518. ISSN 0020-7403
Bi, Sifeng and Bai, Yongtao and Zhou, Xuhong (2022) Bayesian updating : reducing epistemic uncertainty in hysteretic degradation behavior of steel tubular structures. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 8 (3). 04022039. ISSN 2376-7642
Wilson, Andrew Ross and Serrano, Sara Morales and Baker, Keith J. and Oqab, Haroon B. and Dietrich, George B. and Vasile, Massimiliano and Soares, Tiago and Innocenti, Luisa (2022) From life cycle assessment of space systems to environmental communication and reporting. Journal of the British Interplanetary Society, 75 (9). pp. 321-336. ISSN 0007-084X
Crewdson, Georgie and Boaro, Alessio and Kerr, Monica Mary and Lappa, Marcello; (2022) Supporting an ISS experiment as PhD students : a case study of the PARTICLE VIBRATION project. In: Proceedings of the 4th Symposium on Space Educational Activities. Symposium on Space Educational Activities . Symposium on Space Educational Activities (SSEA), ESP. ISBN 9788419184405
Davoodi, Mahdi and Houston, Gemma and Domingues, Allyson and Downie, Jenna and Dennis, David and Oliveira, Mónica S.N. and Poole, Robert J. (2022) Control of purely-elastic instabilities in cross-slot geometries. Science Talks, 3. 100054.
Kaluthantrige, Mewantha and Fodde, Iosto and Feng, Jinglang and Gil-Fernández, Jesús (2022) Autonomous navigation around didymos using CNN-based image processing. In: AAS/AIAA Astrodynamics Specialist Conference 2022, 2022-08-08 - 2022-08-11.
Fodde, Iosto and Feng, Jinglang and Vasile, Massimiliano (2022) Uncertainty maps for motion around binary asteroids. Celestial Mechanics and Dynamical Astronomy, 134 (5). 41. ISSN 0923-2958
Schmitt, Pál and Fu, Song and Benson, Ian and Lavery, Gavin and Ordoñez-Sanchez, Stephanie and Frost, Carwyn and Johnstone, Cameron and Kregting, Louise (2022) A comparison of tidal turbine characteristics obtained from field and laboratory testing. Journal of Marine Science and Engineering, 10 (9). 1182. ISSN 2077-1312
Chen, Ying and Luan, Weiling and Chen, Haofeng and Zhu, Xuanchen (2022) 基于应力场的锂离子电池正极多尺度失效研究. Wuji Cailiao Xuebao/Journal of Inorganic Materials, 37 (8). pp. 918-924. ISSN 1000-324X
Wilson, Andrew Ross and Vasile, Massimiliano and Maddock, Christie A. and Baker, Keith J. (2022) Ecospheric life cycle impacts of annual global space activities. Science of the Total Environment, 834. 155305. ISSN 1879-1026
Boumchita, Wail and Feng, Jinglang (2022) Escape strategies from the capture into 1:1 resonance using low-thrust propulsion. In: AAS/AIAA Astrodynamics Specialist Conference 2022, 2022-08-08 - 2022-08-11.
Li, Jianxun and Wang, Minghang and Chen, Haofeng and Wang, Pengfei and Wang, Weiqiang (2022) Investigation on characteristics of tensile damage and microstructure evolution of steel AISI 316L by nonlinear ultrasonic Lamb wave. International Journal of Pressure Vessels and Piping, 198. 104680. ISSN 0308-0161
Fodde, Iosto and Feng, Jinglang and Vasile, Massimiliano (2022) Landing area analysis for ballistic landing trajectories on the secondary of a binary asteroid. In: AAS/AIAA Astrodynamics Specialist Conference 2022, 2022-08-08 - 2022-08-11.
Kitahara, Masaru and Bi, Sifeng and Broggi, Matteo and Beer, Michael (2022) Distribution-free stochastic model updating of dynamic systems with parameter dependencies. Structural Safety, 97. 102227. ISSN 0167-4730
Thomason, James (2022) An overview of some scaling issues in the sample preparation and data interpretation of the microbond test for fibre-matrix interface characterisation. Polymer Testing, 111. 107591. ISSN 0142-9418
Marchetti, Francesco and Minisci, Edmondo (2022) Adjoint state method for the trajectory optimization of a reentry vehicle. In: 19th EUROPT Workshop on Advances in Continuous Optimization (EUROPT 2022), 2022-07-29 - 2022-07-30, Caparica Campus - SST NOVA - PORTUGAL.
Kaluthantrige, Aurelio and Feng, Jinglang and Gil-Fernández, Jesús and Pellacani, Andrea; (2022) Centroid regression using CNN-based image processing algorithm with application to a binary asteroid system. In: 2022 IEEE Congress on Evolutionary Computation (CEC). 2022 IEEE Congress on Evolutionary Computation, CEC 2022 - Conference Proceedings . IEEE, ITA. ISBN 9781665467087
Johnston, Daniel and Cartmell, Matthew and Wynne, Bradley and Pakrashi, Vikram and Kovacic, Ivana (2022) The FutureForge manipulator and an approximate analytical solution algorithm for its nonlinear dynamics. In: 10th European Nonlinear Dynamics Conference, 2022-07-17 - 2022-07-22.
Yekai, Sun and Yaguang, Wu and Xing, Wang and Yu, Fan and Jie, Yuan and Dayi, Zhang (2022) 叶片/叶盘摩擦阻尼结构的非线性模态分析综述. Journal of Aerospace Power, 37 (10). pp. 2167-2187. ISSN 1000-8055
Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Al-Badour, Fadi and Li, Hongjun (2022) Prediction and validation of intermetallic compound formation during friction stir welding of AA6061 to commercially pure copper. Science and Technology of Welding and Joining, 27 (5). pp. 374-387. ISSN 1362-1718
Morgado, Fábio and Garbacz, Catarina and Fossati, Marco (2022) Impact of anisotropic mesh adaptation on the aerothermodynamics of atmospheric reentry. AIAA Journal, 60 (7). pp. 3973-3989. ISSN 0001-1452
Aje, Damilola and Yang, Liu (2022) Investigation of 3D printed polymer and moulded composites in hot concentrated acid. In: The 20th European Conference on Composite Materials, 2022-06-26 - 2022-06-30.
Akrami, Roya and Yang, Liu and Thomason, James L. (2022) Investigating the effect of silane coupling agent on glass fibre/thermoplastic interfacial adhesion. In: The 20th European Conference on Composite Materials, 2022-06-26 - 2022-06-30.
Bryce, David and Thomason, James and Yang, Liu (2022) Thermoset polymer scaling effects in the microbond test. In: The 20th European Conference on Composite Materials, 2022-06-26 - 2022-06-30.
Greco, Cristian and Campagnola, Stefano and Vasile, Massimiliano (2022) Robust space trajectory design using belief optimal control. Journal of Guidance, Control and Dynamics, 45 (6). pp. 1060-1077. ISSN 1533-3884
Lappa, Marcello and Burel, Thomas and Kerr, Monica and Crewdson, Georgie and Boaro, Alessio and Capobianchi, Paolo and Bonnieu, Sebastien Vincent and Murphy, Lesley and Randall, Peter and Hens, Steven (2022) Particle Vibration, an instrument to study particle accumulation structures on board the International Space Station. Microgravity Science and Technology, 34 (3). 33. ISSN 1875-0494
Leishman, Grant and Nash, David and Yang, Liu and Dyer, Kirsten (2022) A novel approach for wind turbine blade erosion characterization : an investigation using surface gloss measurement. Coatings, 12 (7). 928. ISSN 2079-6412
Zografos, Konstantinos and Afonso, Alexandre M. and Poole, Robert J. (2022) Viscoelastic simulations using the closed-form Adaptive Length Scale (ALS-C) model. Journal of Non-Newtonian Fluid Mechanics, 304. 104776. ISSN 0377-0257
Capobianchi, P. and Lappa, M. and Oliveira, M. S. N. and Pinho, F. T. (2022) Erratum : Shear rheology of a dilute emulsion of ferrofluid droplets dispersed in a non-magnetizable carrier fluid under the influence of a uniform magnetic field (Journal of Rheology (2021) 65 (925) DOI: 10.1122/8.0000226). Journal of Rheology, 66 (4). p. 811. ISSN 1520-8516
Dominquez Calabuig, Guillermo J. and Miraux, Loïs and Wilson, Andrew Ross and Sarritzu, Alberto and Pasini, Angelo (2022) Eco-design of future reusable launchers : insight into their life cycle and atmospheric impact. In: 9th European Conference for Aeronautics and Space Sciences, 2022-06-27 - 2022-07-01.
Garbacz, Catarina and Morgado, Fábio and Fossati, Marco; (2022) Response of shock interaction patterns to different freestream conditions in carbon-dioxide flows over double-wedges. In: AIAA AVIATION 2022 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, [Reston, VA.]. ISBN 9781624106354
Nagy, Peter and Jones, Bryn and Minisci, Edmondo and Fossati, Marco and Cea, Alvaro and Palacios, Rafael and Roussouly, Nicolas and Gazaix, Anne; (2022) Multi-fidelity nonlinear aeroelastic analysis of a strut-braced ultra-high aspect ratio wing configuration. In: AIAA AVIATION 2022 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, [Reston, VA.]. ISBN 9781624106354
Idarraga, Guillermo and Vargas, Johnattan and Jalalvand, Meisam and Meza, Juan and Yang, Liu (2022) Manufacturing and mechanical characterisation of unidirectional fique fibre reinforced polypropylene composites. In: The 20th European Conference on Composite Materials, 2022-06-26 - 2022-06-30.
Minty, Ross F. and Yang, Liu and Thomason, James L. (2022) The influence of temperature and matrix chemistry on interfacial shear strength in glass fibre epoxy composites. In: The 20th European Conference on Composite Materials, 2022-06-26 - 2022-06-30.
Fu, Bo and Wei, Xinxin and Chen, Jin and Bi, Sifeng (2022) Shear lag effects on pedestrian-induced vibration and TMD-based vibration control of footbridges. Structural Engineering International. ISSN 1683-0350
Lappa, Marcello (2022) On the propagation of hydrothermal waves in a fluid layer with two-way coupled dispersed solid particles. Fluids, 7 (7). 215. ISSN 2311-5521
Morgado, Fabio and Peddakotla, Sai Abhishek and Garbacz, Catarina and Vasile, Massimiliano and Fossati, Marco; (2022) Fidelity management of aerothermodynamic modelling for destructive re-entry. In: The 2nd International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions Engineering (FAR). European Space Agency, DEU.
Ponti, Marta G. and White, Christopher J. and Morse, Tracy and Sindico, Francesco and Vasile, Massimiliano and McKee, David (2022) A roadmap for implementing the SDGs using space data. University of Strathclyde, Glasgow.
McGurk, Michael and Yuan, Jie (2022) Computation of limit cycle oscillations and their stabilities in nonlinear aeroelastic systems using harmonic balance methods. In: International Forum on Aeroelasticity and Structural Dynamics (IFASD) 2022, 2022-06-13 - 2022-06-17.
Vasile, Massimiliano and Sanchez, Luis (2022) Robust optimisation of coordinated collision avoidance manoeuvres in large constellations. In: 11th International Workshop on Satellite Constellations & Formation Flying, 2022-06-07 - 2022-06-10.
Kamenicky, Robin and Frank, Michael and Drikakis, Dimitris and Ritos, Konstantinos (2022) Film boiling conjugate heat transfer during immersion quenching. Energies, 15 (12). 4258. ISSN 1996-1073
Wilson, Andrew Ross and Scott Neumann, Shelia (2022) Space Life Cycle Assessment : a risk or opportunity for the USA? Space Education & Strategic Applications, 3 (1). ISSN 2693-2466
Rahimi, Salah and Violatos, Ioannis and Wynne, Bradley and Jackson, Martin (2022) Digital twins for high-value components. Materials World, 30 (6). pp. 38-41. ISSN 0967-8638
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Bingham, John (2022) An enhanced virtual power plant for flexibility services into a local area (including EV's). In: CIRED Porto Workshop 2022, 2022-06-02 - 2022-06-03, Centro de Congressos da Alfândega do Porto.
Howorth, Gary and Kockar, Ivana and Tuohy, Paul and Bingham, John (2022) An enhanced virtual power plant for flexibility services into a local area (including EVs). In: CIRED Porto Workshop 2022, 2022-06-02 - 2022-06-03, Centro de Congressos da Alfândega do Porto.
Ubago Torres, Miguel and Jalalvand, Meisam (2022) Additive binding layers to suppress free edge delamination in composite laminates under tension. Composites Part A: Applied Science and Manufacturing, 156. 106902. ISSN 1359-835X
Hopfe, Christina J. and Brembilla, Eleonora and McElroy, Lori B. and Mcleod, Robert S. and Gustin, Matej and Costola, Daniel; Itard, Laure and Hensen-Centnerová, Lada and Boerstra, Atze and Bluyssen, Philomena and Hensen, Jan and Klein, Tillmann and Loomans, Marcel and Pauwels, Pieter and Struck, Christian and Tenpierik, Martin and Geldermans, Bob, eds. (2022) Digital Erasmus - a pan-European approach to teaching building performance and resilient design. In: CLIMA 2022 Conference. TU Delft OPEN Publishing, NLD, pp. 1-8. ISBN 9789463665643
Lappa, Marcello (2022) Characterization of two-way coupled thermovibrationally driven particle attractee. Physics of Fluids, 34 (5). 053109. ISSN 1070-6631
Ganilova, Olga A. and Cartmell, Matthew P. and Kiley, Andrew (2022) Application of a dynamic thermoelastic coupled model for an aerospace aluminium composite panel. Composite Structures, 288. 115423. ISSN 0263-8223
Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of tempering and annealing on the microstructure and sliding wear response of G350 grey cast iron. Wear, 496-497. 204283. ISSN 0043-1648
Davoodi, Mahdi and Zografos, Konstantinos and Poole, Robert J. (2022) On the similarities of the sPTT and FENE-P models for polymeric fluids. Science Talks, 2. 100015.
Gimelshein, Sergey F. and Wysong, Ingrid J. and Fangman, Alexander J. and Andrienko, Daniil A. and Kunova, Olga V. and Kustova, Elena V. and Garbacz, Catarina and Fossati, Marco and Hanquist, Kyle (2022) Kinetic and continuum modeling of high-temperature oxygen and nitrogen binary mixtures. Journal of Thermophysics and Heat Transfer, 36 (2). pp. 399-418. ISSN 0887-8722
Khujadze, George and Drikakis, Dimitris and Ritos, Konstantinos and Kokkinakis, Ioannis W. and Spottswood, S. Michael (2022) Wavelet analysis of high-speed transition and turbulence over a flat surface. Physics of Fluids, 34 (4). 046107. ISSN 1070-6631
Puliyaneth, Manu and Chen, Haofeng (2022) Creep-cyclic plasticity and damage assessment of an SS304 weldolet. Journal of Pressure Vessel Technology, Transactions of the ASME, 144 (2). 021505. ISSN 0094-9930
Stevenson, Emma and Rodriguez-Fernandez, Victor and Minisci, Edmondo and Camacho, David (2022) A deep learning approach to solar radio flux forecasting. Acta Astronautica, 193. pp. 595-606. ISSN 0094-5765
Mainini, Laura and Serani, Andrea and Rumpfkeil, Markus P. and Minisci, E. and Quagliarella, Domenico and Pehlivan, H. and Yildiz, S. and Ficini, S. and Pellegrini, R. and Fiore, F. Di and Bryson, D. and Nikbay, M. and Diez, M. and Beran, P. (2022) Analytical Benchmark Problems for Multifidelity Optimization Methods. Other. arXiv.org, Ithaca, NY.
Pitrolino, Katherine A. and Felfel, Reda M. and Pellizzeri, Laura Macri and McLaren, Jane and Popov, Alexander A. and Sottile, Virginie and Scotchford, Colin A. and Scammell, Brigitte E. and Roberts, George A.F. and Grant, David M. (2022) Development and in vitro assessment of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold. Carbohydrate Polymers, 282. 119126. ISSN 0144-8617
Wang, Xing and Szydlowski, Michal and Yuan, Jie and Schwingshackl, Christoph (2022) A multi-step interpolated-FFT procedure for full-field nonlinear modal testing of turbomachinery components. Mechanical Systems and Signal Processing, 169. 108771. ISSN 0888-3270
Kaluthantrige, Aurelio and Feng, Jinglang and Gil-Fernández, Jesús and Pellacani, Andrea (2022) Centroiding technique using machine learning algorithm for space optical navigation. In: 3rd IAA Conference in Space Situational Awareness, 2022-04-04 - 2022-04-06, GMV.
Nagy, Peter and Fossati, Marco (2022) Adaptive data-driven model order reduction for unsteady aerodynamics. Fluids, 7 (4). 130. ISSN 2311-5521
Sánchez, Luis and Stevenson, Emma and Vasile, Massimiliano and Rodríguez-Fernández, Victor and Camacho, David (2022) An intelligent system for robust decision-making in the all-vs-all conjunction screening problem. In: 3rd IAA Conference on Space Situational Awareness, 2022-04-04 - 2022-04-06.
Peng, Heng and Liu, Yinghua and Chen, Haofeng and Zhang, Zhengming (2022) Shakedown analysis of bounded kinematic hardening engineering structures under complex cyclic loads : theoretical aspects and a direct approach. Engineering Structures, 256. 114034. ISSN 0141-0296
Mohan, Devina and Scaife, Anna M. M. and Porter, Fiona and Walmsley, Mike and Bowles, Micah (2022) Quantifying uncertainty in deep learning approaches to radio galaxy classification. Monthly Notices of the Royal Astronomical Society, 511 (3). pp. 3722-3740. ISSN 0035-8711
Bin, Yang and JingLang, Feng and XuXing, Huang and Shuang, Li (2022) Hybrid method for accurate multi-gravity-assist trajectory design using pseudostate theory and deep neural networks. Science China - Technological Sciences, 65 (3). pp. 595-610. ISSN 1674-7321
Greco, Cristian and Vasile, Massimiliano (2022) Robust Bayesian particle filter for space object tracking under severe uncertainty. Journal of Guidance, Control and Dynamics, 45 (3). pp. 481-498. ISSN 1533-3884
Wadge, Matthew D. and Carrington, Matthew J. and Constantin, Hannah and Orange, Kieran and Greaves, Jason and Islam, Md Towhidul and Zakir Hossain, Kazi M. and Cooper, Timothy P. and Kudrynskyi, Zakhar R. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2022) Characterization of potential nanoporous sodium titanate film formation on Ti6Al4V and TiO2 microspherical substrates via wet-chemical alkaline conversion. Materials Characterization, 185. 111760. ISSN 1044-5803
Lappa, Marcello and Waris, Wasim (2022) On the role of heat source location and multiplicity in topographically controlled Marangoni-Rayleigh-Bénard convection. Journal of Fluid Mechanics, 939. A20. ISSN 0022-1120
Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer (2022) Investigation of S275JR+AR structural steel fatigue performance in very high cycle domain. Procedia Structural Integrity, 38. pp. 490-496. ISSN 2452-3216
Davoodi, M. and Zografos, K. and Oliveira, P. J. and Poole, R. J. (2022) On the similarities between the simplified Phan-Thien–Tanner model and the finitely extensible nonlinear elastic dumbbell (Peterlin closure) model in simple and complex flows. Physics of Fluids, 34 (3). 033110. ISSN 1070-6631
Wilson, Andrew Ross (2022) Estimating the CO2 intensity of the space sector. Nature Astronomy, 6 (4). pp. 417-418. ISSN 2397-3366
Wei, Xinxin and Liu, Jin-Cheng and Bi, Sifeng (2022) Uncertainty quantification and propagation of crowd behaviour effects on pedestrian-induced vibrations of footbridges. Mechanical Systems and Signal Processing, 167 (Part A). 108557. ISSN 0888-3270
Nasseri, Lynn and Himrane, Nabil and Ameziani, Djamel Eddine and Bourada, Abderrahmane and Bennacer, Rachid and Silva, Luis and Gupta, Parag and MacTaggart, David and Simitev, Radostin D. and Busse, Friedrich H. and Fischer, Patrick and Bruneau, Charles-Henri and Kellay, Hamid and Vitoshkin, Helena and Gelfgat, Alexander and Ueno, Ichiro and Khayat, Roger E. and Hossain, Mohammad Tanvir and Crewdson, Georgie and Lappa, Marcello and Kozlov, Victor and Rysin, Kirill and Vjatkin, Aleksei and Dmitrenko, Artur V. and Papazian, K. and Al Hajaj, Z. and Saghir, M. Z. (2022) Thermal Flows. Multidisciplinary Digital Publishing Institute (MDPI), Basel, Switzerland. ISBN 9783036522272
Ricciardi, Lorenzo Angelo and Maddock, Christie and Vasile, Massimiliano; Greiner, David and Gaspar-Cunha, Antonio and Hernández-Sosa, Daniel and Minisci, Edmondo and Zamuda, Aleš, eds. (2022) Multi-objective optimisation under uncertainty with unscented temporal finite elements. In: Evolutionary Algorithms in Engineering Design Optimization. MDPI Multidisciplinary Digital Publishing Institute, Basel, pp. 187-208. ISBN 9783036527154
Zhu, Li-Guo and Sheng, Zhengming and Schneider, Harald and Chen, Hou-Tong and Tani, Masahiko (2022) Ultrafast phenomena and terahertz waves : introduction. The Journal of Optical Society of America B, 39 (3). UPT1-UPT2. ISSN 1520-8540
Sun, Yekai and Denimal, Enora and Yuan, Jie and Salles, Loïc (2022) Geometric design of friction ring dampers in blisks using nonlinear modal analysis and Kriging surrogate model. Structural and Multidisciplinary Optimization, 65. 98. ISSN 1615-1488
da Graça Marto, Simão and Vasile, Massimiliano (2022) Many-objective robust trajectory optimisation under epistemic uncertainty and imprecision. Acta Astronautica, 191. pp. 99-124. ISSN 0094-5765
Pourzahedi, Ali and Chaparian, Emad and Roustaei, Ali and Frigaard, Ian A. (2022) Flow onset for a single bubble in a yield-stress fluid. Journal of Fluid Mechanics, 933. A21. ISSN 0022-1120
Crewdson, Georgie and Lappa, Marcello (2022) An investigation into the behavior of non-isodense particles in chaotic thermovibrational flow. Fluid Dynamics and Materials Processing, 18 (3). pp. 497-510. ISSN 1555-2578
Alarcón, Daniel and Yuan, Jie and Schwingshackl, Christoph (2022) A novel test rig for the validation of nonlinear friction contact parameters of turbine blade root joints. In: IMAC XL (40th) - 2022, 2022-02-07 - 2022-02-10, Rosen Plaza Hotel.
Brownlie, Frazer and Hodgkiess, Trevor and Pearson, Alastair and Galloway, Alexander (2022) Electrochemical evaluation of the effect of different NaCl concentrations on low alloy- and stainless steels under corrosion and erosion-corrosion conditions. Corrosion and Materials Degradation, 3 (1). pp. 101-126.
Garbacz, Catarina and Morgado, Fábio and Fossati, Marco (2022) Effect of thermal nonequilibrium on the shock interaction mechanism for carbon dioxide mixtures on double-wedge geometries. Physics of Fluids, 34 (2). 026108. ISSN 1070-6631
Bi, Sifeng and He, Kui and Zhao, Yanlin and Moens, David and Beer, Michael and Zhang, Jingrui (2022) Towards the NASA UQ challenge 2019 : systematically forward and inverse approaches for uncertainty propagation and quantification. Mechanical Systems and Signal Processing, 165. 108387. ISSN 0888-3270
Chen, Ying and Luan, Weiling and Zhu, Xuanchen and Chen, Haofeng (2022) Mechanical degradation behavior of single crystal LiNixMnyCozO2 cathode in li-ion battery by indentation analysis. Journal of Pressure Vessel Technology, 144 (5). 051505. ISSN 0094-9930
Celletti, Alessandra and Gales, Catalin and Rodriguez-Fernandez, Victor and Vasile, Massimiliano (2022) Classification of regular and chaotic motions in Hamiltonian systems with deep learning. Scientific Reports, 12. 1890. ISSN 2045-2322
Cho, Nak-Kyun and Choi, Youngjae and Chen, Haofeng (2022) Creep-fatigue interaction effects on pressure-reducing valve under cyclic thermo-mechanical loadings using direct cyclic method. Journal of Pressure Vessel Technology, 144 (1). 011507. ISSN 0094-9930
Feng, Jinglang and Hou, Xiyun and Di Lizia, Pierluigi and Armellin, Roberto and Santeramo, Daniele Antonio (2022) Sensitivity analysis of the orbital motion around 469219 Kamo'oalewa (2016 HO3) to uncertainties on asteroid mass and solar radiation pressure. Advances in Space Research, 69 (3). pp. 1602-1618. ISSN 0273-1177
Milanesi, Andrea and Rizzuto, Francesco and Rinaldi, Maurizio and Foglio Bonda, Andrea and Segale, Lorena and Giovannelli, Lorella (2022) Thermodynamic balance vs. computational fluid dynamics approach for the outlet temperature estimation of a benchtop spray dryer. Pharmaceutics, 14 (2). 296. ISSN 1999-4923
Crewdson, Georgie and Lappa, Marcello (2022) Spatial and temporal evolution of three-dimensional thermovibrational convection in a cubic cavity with various thermal boundary conditions. Physics of Fluids, 34 (1). 014108. ISSN 1070-6631
Shields, S. and Dunlop, A. and Barry, S. and Galloway, P. and Seenan, J.P. and Macdonald, J. (2022) P327 Comparison of adalimumab drug levels and drug survival in proactive vs reactive therapeutic drug monitoring. Journal of Crohn's and Colitis, 16 (Supple). i347-i348. ISSN 1873-9946
Chailad, Wichain and Yang, Liu and Coveney, Vince and Bowen, Chris and Bickley, Alan (2022) Development of slurry-jet erosion test for elastomeric materials. Wear, 488-489. 204125. ISSN 0043-1648
Taylor, Stewart J. and Yang, Liu and Fletcher, Ashleigh J. (2022) The role of cations in resorcinol-formaldehyde gel textural characteristics. Gels, 8 (1). 60. ISSN 2310-2861
Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of cementite spheroidizing duration on the microstructure and sliding wear response of grey cast iron against AISI 4330. Wear, 488-489. 204155. ISSN 0043-1648
Fodde, Iosto and Feng, Jinglang and Vasile, Massimiliano L. (2022) Robust trajectory design for ballistic landings on Dimorphos. In: American Institute of Aeronautics and Astronauts SCITECH 2022 Forum, 2022-01-03 - 2022-01-07, Virtual.
Morgado, Fábio and Peddakotla, Sai Abhishek and Garbacz, Catarina and Vasile, Massimiliano L. and Fossati, Marco; (2022) Multi-fidelity approach for aerodynamic modelling and simulation of uncontrolled atmospheric destructive entry. In: AIAA SCITECH 2022 Forum. AIAA SCITECH 2022 Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624106316
Lyden, Andrew and Tuohy, Paul Gerard (2022) Planning level sizing of heat pumps and hot water tanks incorporating model predictive control and future electricity tariffs. Energy, 238. 121731. ISSN 1873-6785
Thomason, James L. and Jenkins, Peter G. and Xypolias, Georgios (2022) Microbond testing of the interface in glass fibre vinylester composites. Composite Interfaces, 29 (6). pp. 695-709. ISSN 0927-6440
2021
Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and Rahimi, Salah and Wynne, Bradley (2021) Inter-relationship between microstructure evolution and mechanical properties in inertia friction welded 8630 low-alloy steel. Archives of Civil and Mechanical Engineering, 21 (4). 149. ISSN 1644-9665
Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald (2021) Critical review of ASME III plasticity correction factors for fatigue design-by-analysis of nuclear power plant components. Journal of Pressure Vessel Technology, 143 (6). 061201. ISSN 0094-9930
Garbacz, Catarina and Morgado, Fábio and Fossati, Marco and Maier, Walter T. and Munguía, Brian C. and Alonso, Juan J. and Loseille, Adrien (2021) Parametric study of nonequilibrium shock interference patterns over a fuselage-and-wing conceptual vehicle. AIAA Journal, 59 (12). ISSN 0001-1452
Yang, Bin and Li, Shuang and Feng, Jinglang and Vasile, Massimiliano (2021) Fast solver for J2-perturbed Lambert problem using deep neural network. Journal of Guidance, Control and Dynamics. ISSN 1533-3884
Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2021) A comparison of stress analysis and limit analysis approaches for single and multiple nozzle combinations in cylindrical pressure vessels. International Journal of Pressure Vessels and Piping, 194 (Part B). 104563. ISSN 0308-0161
Lappa, Marcello and Sayar, Aydin and Waris, Wasim (2021) Topographically controlled Marangoni-Rayleigh-Bénard convection in liquid metals. Fluids, 6 (12). 447. ISSN 2311-5521
Manzi, M. and Topputo, F. (2021) A flow-informed strategy for ballistic capture orbit generation. Celestial Mechanics and Dynamical Astronomy, 133 (11-12). 54. ISSN 0923-2958
Flett, Graeme and Kelly, Nick (2021) Modelling of individual domestic occupancy and energy demand behaviours using existing datasets and probabilistic modelling methods. Energy and Buildings, 252. 111373. ISSN 0378-7788
Kelly, Nick and Cowie, Andrew and Flett, Graeme (2021) Assessing the ability of electrified domestic heating in the UK to provide unplanned, short-term responsive demand. Energy and Buildings, 252. 111430. ISSN 0378-7788
Barnes, Andrew and Marshall-Cross, Daniel and Hughes, Ben Richard (2021) Validation and comparison of turbulence models for predicting wakes of vertical axis wind turbines. Journal of Ocean Engineering and Marine Energy, 7 (4). pp. 339-362. ISSN 2198-6452
Chaparian, Emad and Frigaard, Ian A. (2021) Clouds of bubbles in a viscoplastic fluid. Journal of Fluid Mechanics, 927. 927. ISSN 0022-1120
Ricciardi, Lorenzo A. and Maddock, Christie Alisa and Vasile, Massimiliano (2021) Multi-objective optimisation under uncertainty with unscented temporal finite elements. Mathematics, 9 (23). 3010.
Fu, Song and Johnstone, Cameron (2021) Numerical performance model for tensioned mooring tidal turbine operating in combined wave-current sea states. Journal of Marine Science and Engineering, 9 (11). 1309. ISSN 2077-1312
Wilson, Callum and Riccardi, Annalisa (2021) Enabling intelligent onboard guidance, navigation, and control using near-term flight hardware. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Marchetti, Francesco and Minisci, Edmondo and Riccardi, Annalisa (2021) Single-stage to orbit ascent trajectory optimisation with reliable evolutionary initial guess. Optimization and Engineering, 24 (1). pp. 291-316. ISSN 1389-4420
Cartmell, Matthew P. and Downie, Jenna (2021) A numerical study of orbit correction for an asymmetrical motorised momentum exchange tether. In: AIAA - ASCEND, 2021-11-08 - 2021-11-17, Las Vegas, Washington DC, online.
Gong, Peng and Turk, Andrej and Nutter, John and Yu, Feng and Wynne, Bradley and Rivera-Diaz-del-Castillo, Pedro and Rainforth, W. Mark (2021) Hydrogen embrittlement mechanisms in advanced high strength steel. Acta Materialia, 223. 117488. ISSN 1359-6454
Yuan, Jie and Salles, Loic and Schwingshackl, Christoph; Kerschen, Gaetan and Brake, Matthew R.W. and Renson, Ludovic, eds. (2021) Effects of the geometry of friction interfaces on the nonlinear dynamics of jointed structure. In: Nonlinear Structures & Systems, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series, 1 . Society for Experimental Mechanics, Cham, Switzerland, pp. 67-74. ISBN 9783030771355
Gentile, Lorenzo and Greco, Cristian and Minisci, Edmondo and Bartz-Beielstein, Thomas and Vasile, Massimiliano (2021) Stochastic satellite tracking with constrained budget via structured-chromosome genetic algorithms. Optimization and Engineering, 24 (1). pp. 257-290. ISSN 1389-4420
Polnik, Mateusz and Riccardi, Annalisa and Akartunali, Kerem (2021) A multistage optimisation algorithm for the large Vehicle Routing Problem with Time Windows and Synchronised Visits. Journal of the Operational Research Society, 72 (11). pp. 2396-2411. ISSN 0160-5682
Powell, Cheyenne and Riccardi, Annalisa (2021) Towards explainability of on-board satellite scheduling for end user interactions. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Creed, Lewis and Graham, Julie and Jenkins, Ciarán and Diaz Riofrio, Sebastian and Wilson, Andrew and Vasile, Massimiliano (2021) STRATHcube : the design of a CubeSat for space debris detection using in-orbit passive bistatic radar. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Graham, Julie and Creed, Lewis and Jenkins, Ciaran and Wilson, Andrew Ross and Vasile, Massimiliano (2021) The design of a fragmentation experiment for a CubeSat during atmospheric re-entry. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Jenkins, Ciarán and Creed, Lewis and Graham, Julie and Kirk, Sam and McGarrity, Douglas and Stewart, Gary and Hope, Rory and Wilson, Andrew and Vasile, Massimiliano (2021) STRATHcube : a student CubeSat that encourages the sustainable usage of space. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Wilson, Andrew Ross and Serrano, Sara Morales and Baker, Keith J. and Oqab, Haroon B. and Dietrich, George B. and Vasile, Massimiliano and Soares, Tiago and Innocenti, Luisa (2021) From life cycle assessment of space systems to environmental communication and reporting. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Sánchez, Luis and Vasile, Massimiliano (2021) Constrained optimal collision avoidance manoeuvre allocation under uncertainty for subsequent conjunction events. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z. and Hattori, Yuji and Hirota, Makoto (2021) Control of Görtler vortices in high-speed boundary layer flows using nonlinear boundary region equations. In: Eighteenth International Conference on Flow Dynamics, 2021-10-27 - 2021-10-29, Virtual Event.
Horner, Colby and Sescu, Adrian and Afsar, Mohammed Z. and Collins, Eric (2021) Effect of plate trailing edge deformations on jet flow and noise : an LES investigation. In: Eighteenth International Conference on Flow Dynamics, 2021-10-27 - 2021-10-29, Virtual Event.
Peddakotla, Sai Abhishek and Minisci, Edmondo and Fossati, Marco; (2021) A novel approach for the accurate simulation of re-entry fragmentation. In: Proceedings of the 72nd International Astronautical Congress 2021, IAC. Proceedings of the International Astronautical Congress, IAC, A6 . International Astronautical Federation (IAF), ARE.
Vasile, Massimiliano (2021) Fast chaos expansions of diffusive and sub-diffusive processes in orbital mechanics. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Walker, Lewis and Vasile, Massimiliano (2021) Mitigation of debris in LEO using space-based lasers. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Boumchita, Wail and Feng, Jinglang (2021) Hamiltonian model of a low-thrust spacecraft's capture into 1:1 resonance around Vesta. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Kajak, Karl Martin and Maddock, Christie and Frei, Heike and Schwenk, Kurt; (2021) Segmentation-driven spacecraft pose estimation for vision-based relative navigation in space. In: IAF Astrodynamics Symposium 2021. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), ARE. ISBN 9781713843078
Maddock, Christie and Parsonage, Ben and Ricciardi, Lorenzo Angelo and Vasile, Massimiliano and Cohen, Orr (2021) Design optimisation and analysis of very high power transportation system to Mars. In: 72nd International Astronautical Congress, 2021-10-25 - 2021-10-29, Dubai World Trade Centre.
Horner, Colby Niles and Sescu, Adrian and Afsar, Mohammed and Collins, Eric (2021) Numerical investigation of a rectangular jet exhausting over a flat plate with periodic surface deformations at the trailing edge. Aerospace, 8 (11). 314. ISSN 2226-4310
Cartmell, Matthew (2021) On the terrestrial measurement of frame-dragging. In: 2nd Conference on Nonlinearity, 2021-10-18 - 2021-10-22, Serbian Academy of Nonlinear Sciences, Belgrade.
Sun, Yekai and Yuan, Jie and Salles, Loïc; (2021) Flutter analysis of blisks with friction ring dampers. In: Proceedings of the Global Power & Propulsion Society 2021. Proceedings of the Global Power & Propulsion Society . Global Power & Propulsion Society, CHN.
Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2021) Calculation of outer crack stress intensity factors for nozzle junctions in cylindrical pressure vessels using FCPAS. In: Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. Volume 2: Computer Technology and Bolted Joints; Design and Analysis, 2 . ASME, New York, NY.. ISBN 9780791885321
Brownlie, Frazer and Hodgkiess, Trevor and Fanicchia, Francesco (2021) Erosion-corrosion behaviour of CoCrFeNiMo0.85 and Al0.5CoCrFeNi complex concentrated alloys produced by laser metal deposition. Surface and Coatings Technology, 423. 127634. ISSN 0257-8972
Scanlon, Tom and Moreau, Julien and Stickland, Matthew (2021) A hydrodynamic model of the west coast of Scotland with coupled sea lice dispersion. In: TELEMAC-MASCARET User Conference, 2021-10-15 - 2021-10-17, Lindner Hotel.
Yang, Bin and Liu, Pengxuan and Feng, Jinglang and Li, Shuang (2021) Two-stage pursuit strategy for incomplete-information impulsive space pursuit-evasion mission using reinforcement learning. Aerospace, 8 (10). 299. ISSN 2226-4310
Karantonis, Konstantinos and Kokkinakis, Ioannis W. and Thornber, Ben and Drikakis, Dimitris (2021) Compressibility in suddenly expanded subsonic flows. Physics of Fluids, 33 (10). 105106. ISSN 1089-7666
Wilson, Callum and Riccardi, Annalisa (2021) Improving the efficiency of reinforcement learning for a spacecraft powered descent with Q-learning. Optimization and Engineering, 24 (1). pp. 223-255. ISSN 1389-4420
Biondi, L. and Perry, M. and McAlorum, J. and Vlachakis, C. and Hamilton, A. and Lo, G. (2021) Alkali-activated cement sensors for sodium chloride monitoring. IEEE Sensors Journal, 21 (19). pp. 21197-21204. ISSN 1530-437X
Cappugi, Lorenzo and Castorrini, Alessio and Bonfiglioli, Aldo and Minisci, Edmondo and Campobasso, M. Sergio (2021) Machine learning-enabled prediction of wind turbine energy yield losses due to general blade leading edge erosion. Energy Conversion and Management, 245. 114567. ISSN 0196-8904
Polnik, Mateusz and Arulselvan, Ashwin and Riccardi, Annalisa (2021) Scheduling space-to-ground optical communication under cloud cover uncertainty. IEEE Transactions on Aerospace and Electronic Systems, 57 (5). pp. 2838-2849. ISSN 0018-9251
Puliyaneth, Manu and Chen, Haofeng (2021) Study on the effect of welding residual stress on creep-cyclic plasticity behaviour. International Journal of Pressure Vessels and Piping, 193. 104444. ISSN 0308-0161
Barnes, Andrew and Marshall-Cross, Daniel and Hughes, Ben Richard (2021) Towards a standard approach for future vertical axis wind turbine aerodynamics research and development. Renewable and Sustainable Energy Reviews, 148. 111221. ISSN 1879-0690
Calautit, Katrina and Nasir, Diana S.N.M. and Hughes, Ben Richard (2021) Low power energy harvesting systems : state of the art and future challenges. Renewable and Sustainable Energy Reviews, 147. 111230. ISSN 1879-0690
Essex, Jane and Wellisch, Gaston and Galbraith, Allison and Egea Alvarez, Agusti and Cunningham, Margaret Rose and Giovelli, Noemi and Ivaturi, Aruna and Li, Rui and Maddock, Christie and Somorin, Tosin and Yue, Hong and Hendry, Pauline and Hendry, Martyn and Essex, Will and Caccavale, Elio and Johnson, Michael Pierre (2021) Sustainable Impact by Design. University of Strathclyde, Glasgow.
Feng, J. and Santeramo, D. and Di Lizia, P. and Armellin, R. and Hou, X. (2021) Dynamical structure of the motion around asteroids with uncertain gravity and solar radiation pressure. Acta Astronautica, 186. pp. 135-147. ISSN 0094-5765
Kaur, Anureet and Gautrot, Julien E. and Cavalli, Gabriele and Watson, Douglas and Bickley, Alan and Akutagawa, Keizo and Busfield, James J.C. (2021) Novel crosslinking system for poly-chloroprene rubber to enable recyclability and introduce self-healing. Polymers, 13 (19). 3347. ISSN 2073-4360
Berquand, Audrey and Darm, Paul and Riccardi, Annalisa (2021) Space transformers : language modeling for space systems. IEEE Access, 9. pp. 133111-133122. ISSN 2169-3536
Wilson, Andrew and Berquand, Audrey (2021) SEA from Space - Coastal management via satellites : strategic planning in response to global sea level rises. In: ESA-EISC Space for Sustainability Award 2021, 2021-05-02 - 2021-09-10.
Allmark, Matthew and Ordonez-Sanchez, Stephanie and Myers, Luke and Ellis, Rob and Lloyd, Catherine and Martinez, Rodrigo and Mason-Jones, Allan and O’Doherty, Tim and Johnstone, Cameron (2021) Performance analysis of model-scale tidal stream turbines situated in different array configurations. Proceedings of the European Wave and Tidal Energy Conference. 2073-1-2073-10. ISSN 2706-6940
Noble, Donald R. and O'Shea, Michael and Judge, Frances and Robles, Eider and Martinez, Rodrigo and Khalid, Faryal and Thies, Philipp R. and Johanning, Lars and Corlay, Yann and Gabl, Roman and Davey, Thomas A. D. and Vejayan, Nithiananthan and Murphy, Jimmy (2021) Standardising marine renewable energy testing : gap analysis and recommendations for development of standards. Journal of Marine Science and Engineering, 9 (9). 971. ISSN 2077-1312
Ordonez Sanchez, S. and Calvillo-Munoz, C. and Mariño-Tapia, I. and Martinez, R. and Fu, S. and Allmark, M. and Mason-Jones, T. and O'Doherty, T. and Silva Casarín, R. and Johnstone, C.; (2021) Tidal stream and ocean current energy - the benefits of harvesting lesser energetic flows. In: Proceedings of the European Wave and Tidal Energy Conference. European Wave and Tidal Energy Conference, [Southampton].
Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander and Sillars, Fiona and Marrocco, Tiziana and Olasolo, Maider and Wallace, Andrew (2021) The influence of load on dry and tribocorrosive sliding of AISI 4330 and 15-5PH against cast iron. Tribology Transactions, 64 (5). pp. 956-967. ISSN 1040-2004
Capobianchi, P. and Lappa, M. and Oliveira, M. S. N. and Pinho, F. T. (2021) Shear rheology of a dilute emulsion of ferrofluid droplets dispersed in a non-magnetizable carrier fluid under the influence of a uniform magnetic field. Journal of Rheology, 65 (5). pp. 925-941. ISSN 1520-8516
Kitahara, Masaru and Bi, Sifeng and Broggi, Matteo and Beer, Michael (2021) Bayesian model updating in time domain with metamodel-based reliability method. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 7 (3). 0001149. ISSN 2376-7642
Lappa, Marcello and Boaro, Alessio (2021) Viscoelastic thermovibrational flow driven by sinusoidal and pulse (square) waves. Fluids, 6 (9). 311. ISSN 2311-5521
Atteya, Mostafa and Mikkelsen, Ove and Wintle, John and Ersdal, Gerhard (2021) Experimental and numerical study of the elastic SCF of tubular joints. Materials, 14 (15). 4220. ISSN 1996-1944
Bao, Hongchen and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2021) Shakedown analysis of modified Bree problems involving thermal membrane stress and generalized loading conditions. International Journal of Pressure Vessels and Piping, 192. 104432. ISSN 0308-0161
Dai, Yanwei and Qin, Fei and Liu, Yinghua and Chen, Haofeng and Berto, Filippo (2021) Characteristics and implications of material mismatch on mode II creep crack tip field : theoretical analysis and numerical investigation. Theoretical and Applied Fracture Mechanics, 114. 103035. ISSN 0167-8442
Nyoni, Kumbuso Joshua and Maronga, Anesu and Tuohy, Paul Gerard and Shane, Agabu (2021) Hydro–connected floating PV renewable energy system and onshore wind potential in Zambia. Energies, 14 (17). 5330. ISSN 1996-1073
Stack, M.M. and Jana, B.D.; Ponthiaux, Pierre and Celis, Jean-Pierre, eds. (2021) Modelling erosion-corrosion in metals : the effects of elastic rebound and impact angle on erosion-corrosion maps. In: Mechanical and Electro-chemical Interactions under Tribocorrosion. Woodhead Publishing Ltd, Oxford, pp. 191-225. ISBN 9780128237656
Visone, M. and Lanzetta, M. and Lappa, M. and Lanzaro, C. and Polizio, L. (2021) Three-dimensional simulation of clouds of multi-disperse evaporating saliva droplets in a train cabin. Physics of Fluids, 33 (8). 083318. ISSN 1089-7666
Boaro, Alessio and Lappa, Marcello (2021) Competition of overstability and stabilizing effects in viscoelastic thermovibrational flow. Physical Review E, 104 (2). 025102. ISSN 2470-0053
Boumchita, Wail and Feng, Jinglang; (2021) 1:1 resonance capture of a low-thrust spacecraft around Vesta. In: 2021 AAS/AIAA Astrodynamics Specialist Conference. AIAA, [Reston, VA.].
Marchetti, Francesco and Minisci, Edmondo (2021) Genetic programming guidance control system for a reentry vehicle under uncertainties. Mathematics, 9 (16). 1868.
Sun, Yekai and Yuan, Jie and Vizzaccaro, Alessandra and Salles, Loïc (2021) On the comparison of different methodologies for the computation of damped nonlinear normal modes and resonance prediction of systems with non-conservative nonlinearities. In: Tribomechadynamics 2021, 2021-08-02 - 2021-08-05.
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z. and Hattori, Yuji and Hirota, Makoto; (2021) A compressible boundary layer optimal control approach using nonlinear boundary region equations. In: AIAA Aviation 2021 Forum. AIAA, USA. ISBN 9781624106101
Garbacz, Catarina and Morgado, Fábio and Fossati, Marco and Scoggins, James B. and Magin, Thierry E. and Capriati, Michele; (2021) Influence of thermochemical modelling of CO2-N2 mixtures on the shock interaction patterns at hypersonic regimes. In: AIAA Aviation 2021 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624106101
Muñoz-Escalona, Patricia and Mridha, Shahjahan and Baker, Thomas Neville (2021) Advances in surface engineering using TIG processing to incorporate ceramic particulates into low alloy and microalloyed steels – a review. Advances in Science and Technology Research Journal, 15 (3). pp. 88-89. ISSN 2299-8624
Peng, Heng and Liu, Yinghua and Chen, Haofeng (2021) Creep rupture assessment of cyclically heated 3D pressure pipelines with volumetric defects using a direct numerical approach. International Journal of Pressure Vessels and Piping, 192. 104387. ISSN 0308-0161
Thomason, James L. and Rudeiros Fernández, Jose L. (2021) Modelling the influence of fibre internal structure on the measured modulus of technical natural fibres. Composites Part A: Applied Science and Manufacturing, 147. 106478. ISSN 1359-835X
Felfel, Reda M. and Parsons, Andrew J. and Chen, Menghao and Stuart, Bryan W. and Wadge, Matthew D. and Grant, David M. (2021) Water resistant fibre/matrix interface in a degradable composite : synergistic effects of heat treatment and polydopamine coating. Composites Part A: Applied Science and Manufacturing, 146. 106415. ISSN 1359-835X
Inam, Saad and Lappa, Marcello (2021) Flow topology and bifurcations of buoyancy and mixed convection in an elongated channel with an abrupt section variation. International Journal of Heat and Mass Transfer, 173. 121267. ISSN 0017-9310
Yuan, Jie and Fantetti, Alfredo and Denimal, Enora and Bhatnagar, Shubham and Pesaresi, Luca and Schwingshackl, Christoph and Salles, Loic (2021) Propagation of friction parameter uncertainties in the nonlinear dynamic response of turbine blades with underplatform dampers. Mechanical Systems and Signal Processing, 156. 107673. ISSN 0888-3270
Nash, James W. K. and Zekos, Iasonas and Stack, Margaret M. (2021) Mapping of meteorological observations over the island of Ireland to enhance the understanding and prediction of rain erosion in wind turbine blades. Energies, 14 (15). 4555. ISSN 1996-1073
Ma, Yiyuan and Minisci, Edmondo and Elham, Ali (2021) Investigating the influence of uncertainty in novel airframe technologies on realizing ultra-high aspect ratio wings. In: AeroBest 2021, 2021-07-21 - 2021-07-23, Virtual.
Hall, Christopher and Lo, Gloria J. and Hamilton, Andrea (2021) Sharp front analysis of moisture buffering. RILEM Technical Letters, 6. pp. 78-81. ISSN 2518-0231
Drikakis, Dimitris and Ritos, Konstantinos and Spottswood, S. Michael and Riley, Zachary B. (2021) Flow transition to turbulence and induced acoustics at Mach 6. Physics of Fluids, 33 (7). 076112. ISSN 1070-6631
Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2021) A study on the erosion-corrosion behaviour of engineering materials used in the geothermal industry. Wear, 477. 203821. ISSN 0043-1648
Giourntas, L. and Brownlie, F. and Hodgkiess, T. and Galloway, A.M. (2021) Influence of metallic matrix on erosion-corrosion behaviour of high chromium cast irons under slurry impingement conditions. Wear, 477. 203834. ISSN 0043-1648
Filippi, Gianluca and Vasile, Massimiliano; Vasile, Massimiliano and Quagliarella, Domenico, eds. (2021) Network resilience optimisation of complex systems. In: Advances in Uncertainty Quantification and Optimization Under Uncertainty with Aerospace Applications. Space Technology Proceedings . Springer, Cham, Switzerland, pp. 315-326. ISBN 9783030805425
Maier, Walter T. and Needels, Jacob T. and Garbacz, Catarina and Morgado, Fábio and Alonso, Juan J. and Fossati, Marco (2021) SU2-NEMO : an open-source framework for high-mach nonequilibrium multi-species flows. Aerospace, 8 (7). 193. ISSN 2226-4310
Di Carlo, Marilena and Vasile, Massimiliano (2021) Analytical solutions for low-thrust orbit transfers. Celestial Mechanics and Dynamical Astronomy, 133. 33. ISSN 0923-2958
Dai, Yanwei and Qin, Fei and Liu, Yinghua and Berto, Filippo and Chen, Haofeng (2021) Characterizations of material constraint effect for creep crack in center weldment under biaxial loading. International Journal of Fracture. ISSN 0376-9429
Davoodi, Mahdi and Houston, Gemma and Downie, Jenna and Oliveira, Mónica S.N. and Poole, Robert J. (2021) Stabilization of purely elastic instabilities in cross-slot geometries. Journal of Fluid Mechanics, 922. A12. ISSN 0022-1120
Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer (2021) Investigation of S275JR+AR structural steel fatigue performance in very high cycle domain. In: 8th International Conference on Very High Cycle Fatigue, 2021-07-05 - 2021-07-09, Online & on-demand.
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed and Hattori, Yuji (2021) Investigation of Görtler vortices in high-speed boundary layers via an efficient numerical solution to the non-linear boundary region equations. Theoretical and Computational Fluid Dynamics. ISSN 1432-2250
Afsar, M. Z. and Gryazev, V. and Markesteijn, A. and Karabasov, S.; (2021) Effect of tensor representations for high-order turbulence correlations in complex axi-symmetric flow fields. In: AIAA Aviation 2021 Forum. AIAA, USA. ISBN 9781624106101
Berquand, Audrey and Moshfeghi, Yashar and Riccardi, Annalisa (2021) SpaceLDA : topic distributions aggregation from a heterogeneous corpus for space systems. Engineering Applications of Artificial Intelligence, 102. 104273. ISSN 0952-1976
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica and Pinho, Fernando (2021) Shear rheology of a dilute emulsion of ferrofluid droplets dispersed in a non-magnetizable carrier fluid under the influence of a uniform magnetic field. Preprint / Working Paper. arXiv.org, Ithaca, N.Y..
Liu, Fang and Gong, Jian-Guo and Chen, Haofeng and Xuan, Fu-Zhen (2021) A direct approach to progressive buckling design considering ratcheting deformation. Thin-Walled Structures, 163. 107656. ISSN 0263-8231
Lyden, Andrew and Flett, Graeme and Tuohy, Paul G. (2021) PyLESA : a Python modelling tool for planning-level local, integrated, and smart energy systems analysis. SoftwareX, 14. 100699. ISSN 2352-7110
Sun, Yekai and Yuan, Jie and Vizzaccaro, Alessandra and Salles, Loïc (2021) Comparison of different methodologies for the computation of damped nonlinear normal modes and resonance prediction of systems with non-conservative nonlinearities. Nonlinear Dynamics, 104 (4). pp. 3077-3107. ISSN 0924-090X
Thomason, James L. and Rudeiros Fernández, Jose L. (2021) Thermal degradation behaviour of natural fibres at thermoplastic composite processing temperatures. Polymer Degradation and Stability, 188. 109594. ISSN 0141-3910
Fodde, Iosto and Feng, Jinglang and Vasile, Massimiliano (2021) Uncertainty propagation for orbital motion around an asteroid using generalized intrusive polynomial algebra : application to didymos system. In: 8th International Conference on Astrodynamics Tools and Techniques, 2021-06-22 - 2021-06-25, Virtual.
Wilson, Callum and Riccardi, Annalisa (2021) Leveraging optimal control demonstrations in reinforcement learning for powered descent. In: 8th International Conference on Astrodynamics Tools and Techniques, 2021-06-22 - 2021-06-25, Virtual.
Maronga, Anesu and Nyoni, Kumbuso Joshua and Tuohy, Paul Gerald and Shane, Agabu (2021) Evaluation of PV and CSP systems to supply power in the Zimbabwe mining sector. Energies, 14 (13). 3740. ISSN 1996-1073
Crewdson, Georgie and Lappa, Marcello (2021) Thermally-driven flows and turbulence in vibrated liquids. International Journal of Thermofluids, 11. 100102. ISSN 2666-2027
da Graça Marto, Simão and Vasile, Massimiliano; Vasile, Massimiliano and Quagliarella, Domenico, eds. (2021) Multi-objective robust trajectory optimization of multi asteroid fly-by under epistemic uncertainty. In: Advances in Uncertainty Quantification and Optimization Under Uncertainty with Aerospace Applications. Springer, Cham, Switzerland, pp. 209-230. ISBN 9783030805425
Zhang, Ya and Haeri, Sina and Pan, Guang and Zhang, Yonghao (2021) Strongly coupled peridynamic and lattice Boltzmann models using immersed boundary method for flow-induced structural deformation and fracture. Journal of Computational Physics, 435 (23). 110267. ISSN 0021-9991
Yuan, Jie and Sun, Yekai and Schwingshackl, Christoph and Salles, Loic (2021) Computation of damped nonlinear normal modes for large scale nonlinear systems in a self-adaptive modal subspace. Mechanical Systems and Signal Processing, 162. p. 108082. ISSN 0888-3270
Nash, David and Leishman, Grant and MacKie, Cameron and Dyer, Kirsten and Yang, Liu (2021) A staged approach to erosion analysis of wind turbine blade coatings. Coatings, 11 (6). 681. ISSN 2079-6412
Groucott, Samuel and Pugh, Kieran and Zekos, Iasonas and Stack, Margaret M (2021) A study of raindrop impacts on a wind turbine material : velocity and impact angle effects on erosion MAPS at various exposure times. Lubricants, 9 (6). 60. ISSN 2075-4442
Liu, Hanyi and Zhang, Jun and Capobianchi, Paolo and Borg, Matthew and Zhang, Yonghao and Wen, Dongsheng (2021) A multiscale volume of fluid method with self-consistent boundary conditions derived from molecular dynamics. Physics of Fluids, 33 (6). 062004. ISSN 1070-6631
McGrath, Ciara N. and Clark, Ruaridh A. and Macdonald, Malcolm (2021) Novel concept of satellite manoeuvre planning using graph theoretical techniques. Advances in Space Research, 67 (11). pp. 3775-3784. ISSN 0273-1177
Walker, Lewis and Di Carlo, Marilena and Greco, Cristian and Vasile, Massimiliano and Warden, Matthew (2021) A mission concept for the low-cost large-scale exploration and characterisation of near earth objects. Advances in Space Research, 67 (11). pp. 3880-3908. ISSN 0273-1177
Bosco, Ferdin Don and Zhang, Yonghao (2021) Pore-scale study of rarefied gas flows using low-variance deviational simulation Monte Carlo method. Transport in Porous Media, 138 (1). pp. 25-48. ISSN 0169-3913
Chen, Ying and Chen, Haofeng and Luan, Weiling (2021) Shakedown, ratcheting and fatigue analysis of cathode coating in lithium-ion battery under steady charging-discharging process. Journal of the Mechanics and Physics of Solids, 150. 104366. ISSN 0022-5096
Yang, Lechang and Wang, Pidong and Wang, Qiang and Bi, Sifeng and Peng, Rui and Behrensdorf, Jasper and Beer, Michael (2021) Reliability analysis of a complex system with hybrid structures and multi-level dependent life metrics. Reliability Engineering and System Safety, 209. 107469. ISSN 0951-8320
Allmark, Matthew and Martinez, Rodrigo and Ordonez-Sanchez, Stephanie and Lloyd, Catherine and O’Doherty, Tim and Germain, Grégory and Gaurier, Benoît and Johnstone, Cameron (2021) A phenomenological study of lab-scale tidal turbine loading under combined irregular wave and shear flow conditions. Journal of Marine Science and Engineering, 9 (6). 593. ISSN 2077-1312
Fu, Song and Ordonez-Sanchez, Stephanie and Martinez, Rodrigo and Allmark, Matthew and Johnstone, Cameron and O’doherty, Tim (2021) Using blade element momentum theory to predict the effect of wave-current interactions on the performance of tidal stream turbines. International Marine Energy Journal, 4 (1). pp. 25-36.
Marchetti, Francesco and Wilson, Callum and Powell, Cheyenne and Minisci, Edmondo and Riccardi, Annalisa; Romero, Juan and Martins, Tiago and Rodríguez-Fernández, Nereida, eds. (2021) Convolutional generative adversarial network, via transfer learning, for traditional Scottish music generation. In: Artificial Intelligence in Music, Sound, Art and Design. Lecture Notes in Computer Science . Springer, ESP, pp. 187-202. ISBN 9783030729141
Walldén, Marcus and Okita, Masao and Ino, Fumihiko and Drikakis, Dimitris and Kokkinakis, Ioannis (2021) Accelerating in-transit co-processing for scientific simulations using region-based data-driven analysis. Algorithms, 14 (5). 154. ISSN 1999-4893
Garbacz, C. and Maier, W. T. and Scoggins, J. B. and Economon, T. D. and Magin, T. and Alonso, J. J. and Fossati, M. (2021) Shock interactions in inviscid air and CO 2 – N 2 flows in thermochemical non-equilibrium. Shock Waves, 31 (3). pp. 239-253. ISSN 1432-2153
Thomason, James L. (2021) Glass fibre sizings and the composites industry : the current state of play. In: Aachen Reinforced, 2021-05-10 - 2021-05-11, RWTH Aachen University.
Song, Yuxuan and Ma, Yi and Chen, Haofeng and He, Zhibo and Chen, Hu and Zhang, Taihua and Gao, Zengliang (2021) The effects of tensile and compressive dwells on creep-fatigue behavior and fracture mechanism in welded joint of P92 steel. Materials Science and Engineering: A, 813. 141129. ISSN 0921-5093
Thomason, J.L. and Yang, L. (2021) Towards a new generation of glass fibre products based on regenerated fibres recycled from end-of-life grp and grp manufacturing waste. In: European Technology Platform on Wind Energy 2021, 2021-05-04 - 2021-05-04, Online (Teams).
Sommermann, Philipp and Cartmell, Matthew P. (2021) The dynamics of an omnidirectional pendulum harvester. Nonlinear Dynamics, 104 (3). pp. 1889-1900. ISSN 0924-090X
Shi, Duoqi and Liu, Changqi and Cheng, Zhen and Li, Zhenlei and Yang, Xiaoguang and Chen, Haofeng (2021) On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures : mesoscale analysis and in situ experimental investigation. Ceramics International, 47 (9). pp. 12680-12694. ISSN 0272-8842
Bastien, David J. and Scaife, Anna M. M. and Tang, Hongming and Bowles, Micah and Porter, Fiona (2021) Structured Variational Inference for Simulating Populations of Radio Galaxies. Monthly Notices of the Royal Astronomical Society, 503 (3). pp. 3351-3370. ISSN 0035-8711
Scaife, Anna M. M. and Porter, Fiona (2021) Fanaroff-Riley classification of radio galaxies using group-equivariant convolutional neural networks. Monthly Notices of the Royal Astronomical Society, 503 (2). pp. 2369-2379. ISSN 0035-8711
Ali, Hafiz Tauqeer and Akrami, Roya and Fotouhi, Sakineh and Bodaghi, Mahdi and Saeedifar, Milad and Yusuf, Mohammad and Fotouhi, Mohammad (2021) Fiber reinforced polymer composites in bridge industry. Structures, 30. pp. 774-785. ISSN 2352-0124
Frank, M. and Lappa, M. and Capobianchi, P. (2021) Investigation of thermocapillary migration of nano-droplets using molecular dynamics. Physics of Fluids, 33 (4). 042110. ISSN 1070-6631
Sánchez Fernández-Mellado, Luis and Vasile, Massimiliano (2021) On the use of machine learning and evidence theory to improve collision risk management. Acta Astronautica, 181. pp. 694-706. ISSN 0094-5765
Zhu, Xuanchen and Chen, Haofeng and Luan, Weiling (2021) On the study of cyclic plasticity behaviour of primary electrode particle for lithium-ion battery. European Journal of Mechanics - A/Solids, 86. 104175. ISSN 0997-7538
Stirrat, Sarah and Afsar, Mohammed Z. and Minisci, Edmondo (2021) Assessment of optimization methods for aeroacoustic prediction of trailing-edge interaction noise in axisymmetric jets. Mathematics, 9 (9). 998.
Thomason, James L. and Rudeiros-Fernández, Jose L. (2021) Characterization of interfacial strength in natural fibre - polyolefin composites at different temperatures. Composite Interfaces. ISSN 0927-6440
Acciarini, Giacomo and Pinto, Francesco and Letizia, Francesca and Martinez-Heras, José A. and Merz, Klaus and Bridges, Christopher and Baydin, Atılım Güneş (2021) Kessler : A machine learning library for spacecraft collision avoidance. In: 8th European Conference on Space Debris, 2021-04-20 - 2021-04-23, ESA/ESOC.
Acciarini, Giacomo and Vasile, Massimiliano (2021) A network-based evolutionary model of the space environment. In: 8th European Conference on Space Debris, 2021-04-20 - 2021-04-23, ESA/ESOC.
Bi, Sifeng and Beer, Michael and Zhang, Jingrui and Yang, Lechang and He, Kui (2021) Optimization or Bayesian strategy? Performance of the Bhattacharyya distance in different algorithms of stochastic model updating. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 7 (2). 020903. ISSN 2332-9025
Greco, C. and Sánchez, L. and Manzi, M. and Vasile, M. (2021) A robust Bayesian agent for optimal collision avoidance manoeuvre planning. In: 8th European Conference on Space Debris, 2021-04-20 - 2021-04-23, ESA/ESOC.
Sun, Yekai and Yuan, Jie and Denimal, Enora and Salles, Loïc (2021) A study of the contact interface for compressor blisks with ring dampers using nonlinear modal analysis. IOP Conference Series: Materials Science and Engineering, 1081. 012041. ISSN 1757-899X
Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A. M. (2021) Erosion-Corrosion Mechanisms of Engineering Steels in Different NaCl Concentrations. Journal of Bio- and Tribo-Corrosion, 7. 80. ISSN 2198-4220
Marchetti, Francesco and Minisci, Edmondo; Hu, Ting and Lourenço, Nuno and Medvet, Eric, eds. (2021) Inclusive genetic programming. In: Genetic Programming. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 12691 (1). Springer International Publishing AG, ESP, pp. 51-65. ISBN 9783030728120
Suárez Fernández, D. and Wynne, B. P. and Crawforth, P. and Jackson, M. (2021) Titanium alloy microstructure fingerprint plots from in-process machining. Materials Science and Engineering A, 811. 141074. ISSN 0921-5093
Martinez, Rodrigo and Gaurier, Benoît and Ordonez-Sanchez, Stephanie and Facq, Jean-Valéry and Germain, Gregory and Johnstone, Cameron and Santic, Ivan and Salvatore, Francesco and Davey, Thomas and Old, Chris and Sellar, Brian G. (2021) Tidal energy round robin tests : a comparison of flow measurements and turbine loading. Journal of Marine Science and Engineering, 9 (4). 425. ISSN 2077-1312
Capobianchi, Paolo and Lappa, Marcello (2021) Particle accumulation structures in a 5 cSt silicone oil liquid bridge : new data for the preparation of the JEREMI experiment. Microgravity Science and Technology, 33 (2). 31. ISSN 1875-0494
Zhou, Qi and Fidalgo, Joana and Bernabeu, Miguel O. and Oliveira, Mónica S. N. and Krüger, Timm (2021) Emergent cell-free layer asymmetry and biased haematocrit partition in a biomimetic vascular network of successive bifurcation. Soft Matter, 17 (13). pp. 3619-3633. ISSN 1744-6848
Filippi, Gianluca and Vasile, Massimiliano (2021) Global solution of constrained min-max problems with inflationary differential evolution. Optimization and Engineering, 24 (1). pp. 99-145. ISSN 1389-4420
Zhu, Lianhua and Pi, Xingcai and Su, Wei and Li, Zhi-Hui and Zhang, Yonghao and Wu, Lei (2021) General synthetic iterative scheme for nonlinear gas kinetic simulation of multi-scale rarefied gas flows. Journal of Computational Physics, 430. 110091. ISSN 0021-9991
Chen, Xiaohui and Zhuang, Kunmin and Zhu, Xuanchen and Chen, Haofeng (2021) Limit load, shakedown and ratchet analysis of pressurized lateral nozzle. Smart Structures and Systems, 27 (3). pp. 421-434. ISSN 1738-1991
Logan, Alasdair and Cava, David García and Liśkiewicz, Grzegorz (2021) Singular spectrum analysis as a tool for early detection of centrifugal compressor flow instability. Measurement: Journal of the International Measurement Confederation (IMEKO), 173. 108536. ISSN 1873-412X
Mawson, Victoria Jayne and Hughes, Ben Richard (2021) Coupling simulation with artificial neural networks for the optimisation of HVAC controls in manufacturing environments. Optimization and Engineering, 22 (1). pp. 103-119. ISSN 1389-4420
Sun, Yekai and Yuan, Jie and Denimal, Enora and Salles, Loïc (2021) Nonlinear modal analysis of frictional ring damper for compressor blisk. Journal of Engineering for Gas Turbines and Power, 143 (3). 031008. ISSN 0742-4795
Boaro, Alessio and Lappa, Marcello (2021) Multicellular states of viscoelastic thermovibrational convection in a square cavity. Physics of Fluids, 33 (3). 033105. ISSN 1070-6631
Chaparian, Emad and Tammisola, Outi (2021) Sliding flows of yield-stress fluids. Journal of Fluid Mechanics, 911. A17. ISSN 0022-1120
Dai, Yue and Yang, Jie and Chen, Haofeng (2021) 核电安全端结构中材料拘束的作用范围研究. Acta Metallurgica Sinica. ISSN 0412-1961 (In Press)
Ma, Zhiyuan and Wang, Xiaoxiao and Chen, Haofeng and Xuan, Fu-Zhen and Liu, Yinghua (2021) A unified direct method for ratchet and fatigue analysis of structures subjected to arbitrary cyclic thermal-mechanical load histories. International Journal of Mechanical Sciences, 194. 106190. ISSN 0020-7403
Di Carlo, Marilena and da Graça Marto, Simão and Vasile, Massimiliano (2021) Extended analytical formulae for the perturbed Keplerian motion under low-thrust acceleration and orbital perturbations. Celestial Mechanics and Dynamical Astronomy, 133. 13. ISSN 0923-2958
Flohr, Anita and Schaap, Allison and Achterberg, Eric P. and Alendal, Guttorm and Arundell, Martin and Berndt, Christian and Blackford, Jerry and Böttner, Christoph and Borisov, Sergey M. and Brown, Robin and Bull, Jonathan M. and Carter, Liam and Chen, Baixin and Dale, Andrew W. and de Beer, Dirk and Dean, Marcella and Deusner, Christian and Dewar, Marius and Durden, Jennifer M. and Elsen, Saskia and Esposito, Mario and Faggetter, Michael and Fischer, Jan P. and Gana, Amine and Gros, Jonas and Haeckel, Matthias and Hanz, Rudolf and Holtappels, Moritz and Hosking, Brett and Huvenne, Veerle A.I. and James, Rachael H. and Koopmans, Dirk and Kossel, Elke and Leighton, Timothy G. and Li, Jianghui and Lichtschlag, Anna and Linke, Peter and Loucaides, Socratis and Martínez-Cabanas, María and Matter, Juerg M. and Mesher, Thomas and Monk, Samuel and Mowlem, Matthew and Oleynik, Anna and Papadimitriou, Stathys and Paxton, David and Pearce, Christopher R. and Peel, Kate and Roche, Ben and Ruhl, Henry A. and Saleem, Umer and Sands, Carla and Saw, Kevin and Schmidt, Mark and Sommer, Stefan and Strong, James A. and Triest, Jack and Ungerböck, Birgit and Walk, John and White, Paul and Widdicombe, Steve and Wilson, Robert Euan and Wright, Hannah and Wyatt, James and Connelly, Douglas (2021) Towards improved monitoring of offshore carbon storage : a real-world field experiment detecting a controlled sub-seafloor CO2 release. International Journal of Greenhouse Gas Control, 106. 103237. ISSN 1750-5836
Pugh, K. and Nash, J. and Reaburn, G. and Stack, M.M. (2021) On analytical tools for assessing the raindrop erosion of wind turbine blades. Renewable and Sustainable Energy Reviews, 137. 110611. ISSN 1879-0690
Robinson, Adam H. and Callow, Ben and Böttner, Christoph and Yilo, Naima and Provenzano, Giuseppe and Falcon-Suarez, Ismael H. and Marín-Moreno, Héctor and Lichtschlag, Anna and Bayrakci, Gaye and Gehrmann, Romina and Parkes, Lou and Roche, Ben and Saleem, Umer and Schramm, Bettina and Waage, Malin and Lavayssière, Aude and Li, Jianghui and Jedari-Eyvazi, Farid and Sahoo, Sourav and Deusner, Christian and Kossel, Elke and Minshull, Timothy A. and Berndt, Christian and Bull, Jonathan M. and Dean, Marcella and James, Rachael H. and Chapman, Mark and Best, Angus I. and Bünz, Stefan and Chen, Baixin and Connelly, Douglas P. and Elger, Judith and Haeckel, Matthias and Henstock, Timothy J. and Karstens, Jens and Macdonald, Calum and Matter, Juerg M. and North, Laurence and Reinardy, Benedict (2021) Multiscale characterisation of chimneys/pipes : fluid escape structures within sedimentary basins. International Journal of Greenhouse Gas Control, 106. 103245. ISSN 1750-5836
Garrick, Andrew J. H. and Toumpis, Athanasios I. and Galloway, Alexander M. (2021) Developing a novel manufacturing method to produce stiffened plate structures. International Journal of Advanced Manufacturing Technology, 112 (9-10). pp. 2805-2813. ISSN 1433-3015
Hassan, Emadelddin and Zekos, Iasonas and Jannson, Philip and Pecor, Toa and Floreani, Christophe and Robert, Colin and Ó Brádaigh, Conchúr M. and Stack, Margaret M. (2021) Erosion mapping of through-thickness toughened powder epoxy gradient glass-fiber-reinforced polymer (GFRP) plates for tidal turbine blades. Lubricants, 9 (3). 22. ISSN 2075-4442
Cartmell, Matthew P. and Lockerbie, Nicholas A. and Faller, James E. (2021) Towards a high-performance Foucault pendulum for the measurement of relativistic gravity. In: NODYCON 2021 - Second International Nonlinear Dynamics Conference, 2021-02-16 - 2021-02-19.
Lloyd, Catherine and Allmark, Matthew and Ordonez-Sanchez, Stephanie and Martinez, Rodrigo and Johnstone, Cameron and Germain, Gregory and Gaurier, Benoit and Mason-Jones, Allan and O'Doherty, Tim (2021) Validation of the dynamic load characteristics on a Tidal Stream Turbine when subjected to wave and current interaction. Ocean Engineering, 222 (15). 108360. ISSN 0029-8018
Capobianchi, Paolo and Lappa, Marcello (2021) On the influence of gravity on particle accumulation structures in high aspect-ratio liquid bridges. Journal of Fluid Mechanics, 908. A29. ISSN 0022-1120
Ganilova, Olga A. and Cartmell, Matthew P. and Kiley, Andrew (2021) Experimental investigation of the thermoelastic performance of an aerospace aluminium honeycomb composite panel. Composite Structures, 257. 113159. ISSN 0263-8223
Li, Hongjun and Qu, Xinchen and Gao, Jian and Karrar, Gihad and Toumpis, Athanasios and Galloway, Alexander (2021) Microstructure and mechanical performance of FSWed joint of T2 copper and AA 1061. Science and Technology of Welding and Joining, 26 (2). pp. 91-98. ISSN 1362-1718
Suárez Fernández, Daniel and Wynne, B. P. and Crawforth, P. and Fox, K. and Jackson, M. (2021) The effect of forging texture and machining parameters on the fatigue performance of titanium alloy disc components. International Journal of Fatigue, 142. 105949. ISSN 0142-1123
Zhu, Xuanchen and Xie, Yu and Chen, Haofeng and Luan, Weiling (2021) Numerical analysis of the cyclic mechanical damage of Li-ion battery electrode and experimental validation. International Journal of Fatigue, 142. 105915. ISSN 0142-1123
Macdonald, J. R. and Stack, M. M. (2021) Some thoughts on modelling hail impact on surfaces. Journal of Bio- and Tribo-Corrosion, 7. 37. ISSN 2198-4220
Pugh, K. and Stack, M. M. (2021) Rain erosion maps for wind turbines based on geographical locations : a case study in Ireland and Britain. Journal of Bio- and Tribo-Corrosion, 7. 34. ISSN 2198-4220
Riccardi, Annalisa and Gemignani, Jessica and Fernandez-Navarro, Francisco and Heffernan, Anna (2021) Optimisation of non-pharmaceutical measures in COVID-19 growth via neural networks. IEEE Transactions on Emerging Topics in Computational Intelligence, 5 (1). pp. 79-91. ISSN 2471-285X
Akrami, Roya and Anjum, Shahwaiz and Fotouhi, Sakineh and Boaretto, Joel and de Camargo, Felipe Vannucchi and Fotouhi, Mohamad (2021) Investigating the effect of interface morphology in adhesively bonded composite wavy-lap joints. Journal of Composites Science, 5 (1). 32. ISSN 2504-477X
Hossain, Kazi M. Zakir and Calabrese, Vincenzo and da Silva, Marcelo A. and Schmitt, Julien and Bryant, Saffron J. and Islam, Md Towhidul and Felfel, Reda M. and Scott, Janet L. and Edler, Karen J. (2021) Microstructural, thermal, crystallization, and water absorption properties of films prepared from never-dried and freeze-dried cellulose nanocrystals. Macromolecular Materials and Engineering, 306 (1). 2000462. ISSN 1439-2054
Burshtein, N. and Zografos, K. and Shen, A. Q. and Poole, R. J. and Haward, S. J. (2021) Periodic fluctuations of streamwise vortices in inertia-dominated intersecting flows. Physics of Fluids, 33 (1). 014106. ISSN 1089-7666
Es Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z. and Hattori, Yuji and Hirota, Makoto; (2021) Effect of localized wall cooling or heating on streaks in high-speed boundary layers. In: AIAA Scitech 2021 Forum. AIAA, Virtual, Online.
Crewdson, Georgie and Lappa, Marcello (2021) The zoo of modes of convection in liquids vibrated along the direction of the temperature gradient. Fluids, 6 (1). 30. ISSN 2311-5521
Zhu, Yunpeng and Yuan, Jie and Lang, Zi-Qiang and Schwingshackl, Christoph W. and Salles, Loïc and Kadirkamanathan, Visakan (2021) The data driven surrogate model based dynamic design of aero-engine fan systems. Journal of Engineering for Gas Turbines and Power. ISSN 0742-4795
Parsonage, Ben and Maddock, Christie; (2021) Multi-stage multi-fidelity information correction for artificial neural network based meta-modelling. In: 2020 IEEE Symposium Series on Computational Intelligence. IEEE, AUS, pp. 950-957. ISBN 978-1-7281-2547-3
Su, Wei and Zhang, Yonghao and Wu, Lei (2021) Multiscale simulation of molecular gas flows by the general synthetic iterative scheme. Computer Methods in Applied Mechanics and Engineering, 373. 113548. ISSN 0045-7825
Zukowska, Daria and Rojas, Gabriel and Burman, Esfand and Guyot, Gaelle and Bocanegra-Yanez, Maria del Carmen and Laverge, Jelle and Cao, Guangyu and Kolarik, Jakub (2021) Ventilation in low energy residences–a survey on code requirements, implementation barriers and operational challenges from seven European countries. International Journal of Ventilation, 20 (2). pp. 83-102. ISSN 2044-4044
2020
Clarke, Joseph Andrew and McGhee, Raheal and Svehla, Katalin (2020) Opportunity mapping for urban scale renewable energy generation. Renewable Energy, 162. pp. 779-787. ISSN 0960-1481
He, Longxue and Liu, Yong and Bi, Sifeng and Wang, Li and Broggi, Matteo and Beer, Michael (2020) Estimation of failure probability in braced excavation using Bayesian networks with integrated model updating. Underground Space, 5 (4). pp. 315-323. ISSN 2467-9674
Kucharek, Mariusz and MacRae, William and Yang, Liu (2020) Investigation of the effects of silica aerogel particles on thermal and mechanical properties of epoxy composites. Composites Part A: Applied Science and Manufacturing, 139. 106108. ISSN 1359-835X
Casini, Stefano and Fodde, Iosto and Monna, Bert and Cervone, Angelo and Gill, Eberhard (2020) Novel 3U stand-alone CubeSat architecture for autonomous Near Earth Asteroid fly-by. Aerospace, 8 (1). 9. ISSN 2226-4310
Bonetti, Valentina; Bicer, Yusuf and Akif Ezan, Mehmet and Dincer, İbrahim, eds. (2020) Comfort as the dead state of buildings : a preliminary discussion. In: 12th International Exergy, Energy and Environment Symposium (IEEES-12). Hamad bin Khalifa University Press, QAT, pp. 584-588. ISBN 9786254098178
Bowles, Micah and Scaife, Anna M. M. and Porter, Fiona and Tang, Hongming and Bastien, David J. (2020) Attention-gating for improved radio galaxy classification. Monthly Notices of the Royal Astronomical Society, 501 (3). pp. 4579-4595. ISSN 0035-8711
Fotouhi, M. and Jalalvand, M. and Prato, A. and Wisnom, M. R.; (2020) Thin ply carbon/glass hybrid laminates to activate new damage mechanisms under indentation. In: 18 European Conference on Composite Materials (ECCM 18). European Conference on Composite Materials, ECCM, GRC.
Allmark, Matthew and Ellis, Robert and Ebdon, Tim and Lloyd, Catherine and Ordonez Sanchez, Stephanie and Martinez, Rodrigo and Mason-Jones, Allan and Johnstone, Cameron and O’Doherty, Tim (2020) A detailed study of tidal turbine power production and dynamic loading under grid generated turbulence and turbine wake operation. Renewable Energy. ISSN 0960-1481
Smith, F. and Brownlie, F. and Hodgkiess, T. and Toumpis, A. and Pearson, A. and Galloway, A.M. (2020) Effect of salinity on the corrosive wear behaviour of engineering steels in aqueous solutions. Wear, 462-463. 203515. ISSN 0043-1648
Su, Wei and Zhu, Lianhua and Wu, Lei (2020) Fast convergence and asymptotic preserving of the general synthetic iterative scheme. SIAM Journal on Scientific Computing, 42 (6). B1517-B1540. ISSN 1064-8275
Lappa, Marcello and Boaro, Alessio (2020) Rayleigh-Bénard convection in viscoelastic liquid bridges. Journal of Fluid Mechanics, 904. A2. ISSN 0022-1120
Brownlie, F. and Hodgkiess, T. and Galloway, A. M. and Pearson, A. (2020) Experimental investigation of engineering materials under repetitive impact with slurry conditions. Tribology letters, 69. 5. ISSN 1023-8883
Acciarini, Giacomo and Pinto, Francesco and Metz, Sascha and Boufelja, Sarah and Kaczmarek, Sylvester and Merz, Klaus and Martinez-Heras, José A. and Letizia, Francesca and Bridges, Christopher and Baydin, Atılım Güneş (2020) Spacecraft collision risk assessment with probabilistic programming. In: NeurIPS 2020, 2020-12-06 - 2020-12-12, Canada.
Pinto, Francesco and Acciarini, Giacomo and Metz, Sascha and Boufelja, Sarah and Kaczmarek, Sylvester and Merz, Klaus and Martinez-Heras, José A. and Letizia, Francesca and Bridges, Christopher and Baydin, Atılım Güneş (2020) Towards automated satellite conjunction management with Bayesian deep learning. In: NeurIPS 2020, 2020-12-06 - 2020-12-12, Canada.
Baker, Thomas Neville and Muñoz-de Escalona, Patricia and Olasolo, Maider and Marrocco, Tiziana and Kelly, James and Wei, Bingquiang and He, Kejian and Mridha, Shahajahan (2020) Role of preplaced silicon on a TIG processed SiC incorporated microalloyed steel. Materials Science and Technology, 36 (12). pp. 1349-1363. ISSN 0267-0836
Lombardi, Nicolo and Ordonez-Sanchez, Stephanie and Zanforlin, Stefania and Johnstone, Cameron (2020) A hybrid BEM-CFD virtual blade model to predict interactions between tidal stream turbines under wave conditions. Journal of Marine Science and Engineering, 8 (12). 969. ISSN 2077-1312
Tardioli, Chiara and Farnocchia, Davide and Vasile, Massimiliano and Chesley, Steve R. (2020) Impact probability under aleatory and epistemic uncertainties. Celestial Mechanics and Dynamical Astronomy, 132 (11-12). 54. ISSN 0923-2958
Afsar, Mohammed and Kokkinakis, Ioannis and Stirrat, Sarah (2020) Modeling and simulation of non-homogeneous turbulence subjected to sudden distortion with finite upstream mean flow shear. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Filippi, Gianluca and Vasile, Massimiliano; Gaspar-Cunha, A. and Periaux, J. and Giannakoglou, K.C. and Quagliarella, N.R. and Greiner, D., eds. (2020) A multi layer evidence network model for the design process of space systems under epistemic uncertainty. In: Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences. Computational Methods in Applied Sciences . Springer, Cham, Switzerland, pp. 227-243. ISBN 9783030574222
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed and Hattori, Yuji and Hirota, Makoto (2020) Investigation of an optimal control approach in the context of compressible boundary region equations. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Horner, Colby and Sescu, Adrian and Afsar, Mohammed and Collins, Eric (2020) Numerical investigation of the effect of trailing edge deformations on noise from jets exhausting over flat plates. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Kholdoenko, Danila and Afsar, Mohammed and Muhel, Rohella and Kokkinakis, Ioannis (2020) Assessment of the Coanda Effect in 2D and 3D CFD simulations of installed rectangular jets. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Sescu, Adrian and Es-Sahli, Omar and Afsar, Mohammed and Hattori, Yuji and Hirota, Makoto (2020) Effect of wall cooling or heating on streaks and streamwise vortices developing in compressible boundary layers. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Stirrat, Sarah and Afsar, Mohammed and Minisci, Edmondo and Kokkinakis, Ioannis (2020) Modelling the trailing edge noise using optimisation techniques within a rapid distortion theory framework. In: 73rd Annual Meeting of the APS Division of Fluid Dynamics, 2020-11-22 - 2020-11-24, Online Event.
Liu, Yanan and Zografos, Konstantinos and Fidalgo, Joana and Duchêne, Charles and Quintard, Clément and Darnige, Thierry and Filipe, Vasco and Huille, Sylvain and du Roure, Olivia and Oliveira, Monica S. N. and Lindner, Anke (2020) Optimised hyperbolic microchannels for the mechanical characterisation of bio-particles. Soft Matter, 16 (43). pp. 9844-9856. ISSN 1744-6848
Filippi, Gianluca and Vasile, Massimiliano (2020) Network resilience optimisation of complex systems. In: International Conference on Uncertainty Quantification & Optimisation, 2020-11-16 - 2020-11-19, Online.
Filippi, Gianluca and Vasile, Massimiliano; Filipič, Bogdan and Minisci, Edmondo and Vasile, Massimiliano, eds. (2020) Inflationary differential evolution for Constrained Multi-Objective Optimisation Problem. In: Bioinspired Optimization Methods and Their Applications. Springer, BEL, pp. 29-42. ISBN 9783030637101
Hassan, Navid Bani and Ali, Mumtaz and Griffiths, Alexander D. and Lowe, Christopher and MacDonald, Malcolm and Dawson, Martin D. and Herrnsdorf, Johannes and Strain, Michael J.; (2020) Integration of an LED/SPAD optical wireless transceiver with CubeSat on-board systems. In: 2020 IEEE Photonics Conference (IPC). IEEE, CAN. ISBN 9781728158921
Marchetti, Francesco and Minisci, Edmondo; Filipič, Bogdan and Minisci, Edmondo and Vasile, Massimiliano, eds. (2020) A hybrid Neural Network-Genetic Programming Intelligent Control approach. In: Bioinspired Optimization Methods and Their Applications. Springer, BEL, pp. 240-254. ISBN 9783030637101
Flett, Graeme Hamilton and Tuohy, Paul Gerard and Lyden, Andrew (2020) Towards a smart community evaluation and implementation toolkit - low-cost mini-district predictive controls with flexible tariffs. In: uSIM2020 Building to Buildings – Urban and Community Energy Modelling, 2020-11-12 - 2020-11-12, Heriot Watt University.
Kelly, N J and Allison, J and Flett, G and Hand, J W (2020) Assessing the ability of roof-mounted photovoltaic (PV) canopies to support electric vehicle (EV) charging in cities. In: uSIM2020 Building to Buildings – Urban and Community Energy Modelling, 2020-11-12 - 2020-11-12, Heriot Watt University.
Zheng, Xiaotao and Wang, Jiqiang and Chen, Haofeng (2020) Burst pressures of high-density polyethylene pipes considering the notch effect : testing and prediction. Journal of Testing and Evaluation, 48 (6). ISSN 1945-7553
Walczak, Magdalena and Sharifi, Shayan and Stack, Margaret M (2020) On a multiphysics approach to modelling the erosion–enhanced corrosion of low–alloy carbon steel in chloride containing environments. Corrosion Science, 176. 109045. ISSN 0010-938X
Chaparian, Emad and Ardekani, Mehdi N. and Brandt, Luca and Tammisola, Outi (2020) Particle migration in channel flow of an elastoviscoplastic fluid. Journal of Non-Newtonian Fluid Mechanics, 284. 104376. ISSN 0377-0257
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z. and Buxton, Oliver R. H. (2020) Investigation of wakes generated by fractal plates in the compressible flow regime using large-eddy simulations (LES). Physics of Fluids, 32 (10). 105106. ISSN 1089-7666
Ferialdi, Hermes and Lappa, Marcello and Haughey, Christopher (2020) On the role of thermal boundary conditions in typical problems of buoyancy convection : a combined experimental-numerical analysis. International Journal of Heat and Mass Transfer, 159. 120012. ISSN 0017-9310
Germanou, Lefki and Ho, Minh Tuan and Zhang, Yonghao and Wu, Lei (2020) Shale gas permeability upscaling from the pore-scale. Physics of Fluids, 32 (10). 102012. ISSN 1070-6631
Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Li, Hongjun and Al-Badour, Fadi (2020) Microstructural characterisation and mechanical properties of dissimilar AA5083-copper joints produced by friction stir welding. Journal of Materials Research and Technology, 9 (5). pp. 11968-11979. ISSN 2238-7854
Lappa, Marcello and Inam, Saad (2020) Thermogravitational and hybrid convection in an obstructed compact cavity. International Journal of Thermal Sciences, 156. 106478. ISSN 1290-0729
Sanchez Fernandez-Mellado, Luis and Vasile, Massimiliano (2020) Synthetic database of space objects encounter events subject to epistemic uncertainty. Data in Brief, 32. 106298. ISSN 2352-3409
Sun, Yekai and Yuan, Jie and Pesaresi, Luca and Denimal, Enora and Salles, Loic (2020) Parametric study and uncertainty quantification of the nonlinear modal properties of frictional dampers. Journal of Vibration and Acoustics, Transactions of the ASME, 142 (5). 051102. ISSN 1528-8927
Zhang, Jie and Cheng, Xiaoquan and Cheng, Yujia and Guo, Xin and Yang, Liu (2020) Effect of over-ply on moisture absorption behavior of scarf-repaired composite laminate. International Journal of Adhesion and Adhesives, 102. 102683. ISSN 0143-7496
Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2020) Effect of the internal pressure and external loads on nozzles in cylindrical vessel. IOP Conference Series: Materials Science and Engineering, 938 (1). 012007. ISSN 1757-899X
Afsar, Mohammed and Kokkinakis, Ioannis and Stirrat, Sarah (2020) Large-Eddy simulation of non-homogeneous turbulence subjected to sudden distortion. In: Seventeenth International Conference on Flow Dynamics, 2020-10-28 - 2020-10-30, Virtual Conference and Tohoku University.
Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald; (2020) Comparative evaluation of plastic design methods for fatigue assessment of a nuclear class 1 piping nozzle. In: ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers(ASME), Virtual, Online. ISBN 9780791883839
Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald; (2020) Critical review of ASME III plasticity correction factors for fatigue design-by-analysis of nuclear power plant components. In: ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers(ASME), Virtual, Online. ISBN 9780791883815
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z. and Hattori, Yuji and Hirota, Makoto (2020) Control of streamwise vortices developing in compressible boundary layers. In: Seventeenth International Conference on Flow Dynamics, 2020-10-28 - 2020-10-30, Virtual Conference and Tohoku University.
Sescu, Adrian and Afsar, Mohammed Z. and Bushan, Shanti and Hattori, Yuji and Hirota, Makoto (2020) Active control of high-speed boundary layer flows. In: Seventeenth International Conference on Flow Dynamics, 2020-10-28 - 2020-10-30, Virtual Conference and Tohoku University.
Stirrat, Sarah and Afsar, Mohammed and Minisci, Edmondo and Kokkinakis, Ioannis (2020) Using optimisation techniques within a rapid-distortion theory framework to improve trailing edge noise predictions. In: Seventeenth International Conference on Flow Dynamics, 2020-10-28 - 2020-10-30, Virtual Conference and Tohoku University.
Ho, Minh Tuan and Li, Jun and Su, Wei and Wu, Lei and Borg, Matthew K. and Li, Zhihui and Zhang, Yonghao (2020) Rarefied flow separation in microchannel with bends. Journal of Fluid Mechanics, 901. A26. ISSN 0022-1120
Bryce, David and Thomason, James and Yang, Liu (2020) Micromechanical and spectroscopic characterisation of the curing performance of epoxy resins in the microbond test. IOP Conference Series: Materials Science and Engineering, 942 (1). 012019. ISSN 1757-899X
Jenkins, Peter G and Bryce, David and Xypolias, Georgios and Thomason, James L (2020) Micro-mechanical investigation of glass fibre/resin interface failure in mode I and mode II. IOP Conference Series: Materials Science and Engineering, 942. 012028. ISSN 1757-899X
Thomason, J L and Yang, L and Pender, K (2020) Upgrading and reuse of glass fibre recycled from end-of-life composites. IOP Conference Series: Materials Science and Engineering, 942. 012002. ISSN 1757-899X
Xypolias, G and Thomason, J and Yang, L (2020) The effect of environmental ageing in the interphase of a glass fibre/vinyl ester composite designed for wind turbine applications. IOP Conference Series: Materials Science and Engineering, 942 (1). 012031. ISSN 1757-899X
Ojo, Ebenezer and Osman, Musab and Mnemo, Mitchelle and Anwar, Ali and Houson, Ian and O'Meahdra, Ruairi and Berthold, Schenkel and Florence, Alastair (2020) Multistage, multi-zones antisolvent-cooling crystallisation of a proprietary API : experimental comparison of effect of geometry and hydrodynamics in four batch crystallisers. In: CMAC Annual Open Day, 2020-10-21 - 2020-10-22, Virtual event.
Feng, Jinglang and Santeramo, Daniele Antonio and Hou, Xiyun and Di Lizia, Pierluigi and Armellin, Roberto (2020) Sensitivity analysis of orbital motion around 2016 HO3 to uncertainties of gravity and solar radiation pressure. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Stevenson, Emma and Rodríguez-Fernández, Víctor and Minisci, Edmondo and Camacho, David (2020) A deep learning approach to space weather proxy forecasting for orbital prediction. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Sánchez Fernández-Mellado, Luis and Vasile, Massimiliano (2020) AI for autonomous CAM execution. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Acciarini, Giacomo and Vasile, Massimiliano (2020) A multi-layer temporal network model of the space environment. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Filippi, Gianluca and Gillespie, Drew and Wilson, Andrew Ross and Vasile, Massimiliano (2020) A resilience approach to the design of future moon base power systems. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Gillespie, Drew and Wilson, Andrew Ross and Martin, Donald and Mitchell, Gareth and Filippi, Gianluca and Vasile, Massimiliano (2020) Comparative analysis of solar power satellite systems to support a moon base. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Greco, Cristian and Vasile, Massimiliano (2020) Closing the loop between mission design and navigation analysis. In: International Astronautical Congress, 2020-10-12 - 2020-10-14.
Manzi, Matteo and Vasile, Massimiliano (2020) Orbital anomaly reconstruction using deep symbolic regression. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Wilson, Andrew Ross and Vasile, Massimiliano and Oqab, Haroon B. and Dietrich, George B. (2020) A process-based life cycle sustainability assessment of the space-based solar power concept. In: 71st International Astronautical Congress, 2020-10-12 - 2020-10-14, Virtual.
Hasnain, Saqib and Kallu, Karam Dad and Nawaz, Muhammad Haq and Abbas, Naseem and Pruncu, Catalin Iulin (2020) Dynamic response of an inverted pendulum system in water under parametric excitations for energy harvesting : a conceptual approach. Energies, 13 (19). 5215. ISSN 1996-1073
Jenkins, Ciarán and Hope, Rory and Wilson, Andrew Ross and Berquand, Audrey (2020) STRATHcube : The design of a student CubeSat using concurrent engineering methods. In: 9th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2020), 2020-09-30 - 2020-10-02, Digital.
Kyriakou, Faidon and Maclean, Craig and Dempster, William and Nash, David (2020) Efficiently simulating an endograft deployment : a methodology for detailed CFD analyses. Annals of Biomedical Engineering, 48 (10). pp. 2449-2465. ISSN 0090-6964
Pender, K. and Yang, L. (2020) Regenerating performance of glass fibre recycled from wind turbine blade. Composites Part B: Engineering, 198. 108230. ISSN 1359-8368
Silva, Andreia F. and Pimenta, Francisco and Alves, Manuel A. and Oliveira, Monica S.N. (2020) Flow dynamics of vitreous humour during saccadic eye movements. Journal of the Mechanical Behavior of Biomedical Materials, 110. 103860. ISSN 1751-6161
Wilson, Andrew Ross and Berquand, Audrey (2020) Concurrent engineering and social distancing 101 : lessons learned during a global pandemic. In: 9th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2020), 2020-09-30 - 2020-10-02, Digital.
Zhang, Shuai and Clark, Ruaridh and Huang, Yunke (2020) Frequency-dependent strategy selection in a hunting game with a finite population. Applied Mathematics and Computation, 382. 125355. ISSN 0096-3003
Zografos, Konstantinos and Afonso, Alexandre M. and Poole, Robert J. and Oliveira, Mónica S.N. (2020) A viscoelastic two-phase solver using a phase-field approach. Journal of Non-Newtonian Fluid Mechanics, 284. 104364. ISSN 0377-0257
Berquand, Audrey and Riccardi, Annalisa (2020) From engineering models to knowledge graph : delivering new insights into models. In: 9th International Systems & Concurrent Engineering for Space Applications Conference (SECESA 2020), 2020-09-30 - 2020-10-02, Digital.
Daw, William and Kingshott, Ruth N. and Saatchi, Reza and Burke, Derek and Evans, Robert and Holloway, Alan and Travis, Jon and Jones, Anthony and Hughes, Ben and Elphick, Heather E. (2020) A novel, contactless, portable "spot-check" device accurately measures respiratory rate. Journal of Medical Devices, 14 (3). 031002. ISSN 1932-6181
Punzo, Giuliano and Tewari, Anurag and Butans, Eugene and Vasile, Massimiliano and Purvis, Alan and Varga, Liz and Mayfield, Martin (2020) Engineering resilient complex systems : the necessary shift toward complexity science. IEEE Systems Journal, 14 (3). pp. 3865-3874. ISSN 1932-8184
Suárez Fernández, Daniel and Jackson, M. and Crawforth, P. and Fox, K. and Wynne, B. P. (2020) Using machining force feedback to quantify grain size in beta titanium. Materialia, 13. 100856. ISSN 2589-1529
Youngs, David L. and Thornber, Ben (2020) Buoyancy–Drag modelling of bubble and spike distances for single-shock Richtmyer–Meshkov mixing. Physica D: Nonlinear Phenomena, 410. 132517. ISSN 0167-2789
Wang, Wenjie and Yang, Jie and Chen, Haofeng and Yang, Qianyu (2020) Capturing and micromechanical analysis of the crack-branching behavior in welded joints. Metals, 10 (10). 1308. ISSN 2075-4701
Marchetti, Francesco and Minisci, Edmondo and Riccardi, Annalisa; (2020) Towards intelligent control via genetic programming. In: 2020 International Joint Conference on Neural Networks (IJCNN). IEEE, GBR. ISBN 9781728169279
Wilson, Callum and Riccardi, Annalisa and Minisci, Edmondo; (2020) A novel update mechanism for Q-Networks based on extreme learning machines. In: 2020 International Joint Conference on Neural Networks (IJCNN). IEEE, GBR. ISBN 9781728169262
Martinez, Rodrigo and Ordonez-Sanchez, Stephanie and Allmark, Matthew and Lloyd, Catherine and O'Doherty, Tim and Gaurier, Benoit and Germain, Gregory and Johnstone, Cameron (2020) Analysis of the effects of control strategies and wave climates on the loading and performance of a laboratory scale horizontal axis tidal turbine. Ocean Engineering, 212. 107713. ISSN 0029-8018
Lappa, Marcello; Hashmi, Saleem, ed. (2020) Thermally-driven flows in polymeric liquids. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, 724–742. ISBN 9780128035818
Gentile, Lorenzo and Filippi, Gianluca and Minisci, Edmondo and Vasile, Massimiliano and Bartz-Beielstein, Thomas; (2020) Preliminary spacecraft design by means of structured-chromosome genetic algorithms. In: 2020 IEEE Congress on Evolutionary Computation (CEC). IEEE, GBR. ISBN 9781728169309
Gentile, Lorenzo and Morales, Elisa and Minisci, Edmondo and Quagliarella, Domenico and Bartz-Beielstein, Thomas and Tognaccini, Renato; (2020) High-lift devices topology optimisation using structured-chromosome genetic algorithm. In: 2020 IEEE Congress on Evolutionary Computation (CEC). IEEE, GBR. ISBN 9781728169309
Manzi, Matteo and Vasile, Massimiliano; (2020) Discovering unmodeled components in astrodynamics with symbolic regression. In: 2020 IEEE Congress on Evolutionary Computation (CEC). IEEE, GBR. ISBN 9781728169293
Torre, Francesco and Grey, Stuart and Vasile, Massimiliano (2020) Angles-only navigation in the proximity of a binary asteroid system. Journal of Guidance, Control and Dynamics, 44 (1). pp. 57-74. ISSN 1533-3884
Fotouhi, Mohamad and Jalalvand, Meisam and Saeedifar, Milad and Xiao, Bill and Wisnom, Michael R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247. 112444. ISSN 0263-8223
Peng, Heng and Liu, Yinghua and Chen, Haofeng (2020) Numerical schemes based on the stress compensation method framework for creep rupture assessment. European Journal of Mechanics - A/Solids, 83. 104014. ISSN 0997-7538
Uzzaman, Asraf and Lim, James B.P. and Nash, David and Roy, Krishanu (2020) Web crippling behaviour of cold-formed steel channel sections with edge-stiffened and unstiffened circular holes under interior-two-flange loading condition. Thin-Walled Structures, 154. ISSN 0263-8231
Allmark, Matthew and Ellis, Robert and Lloyd, Catherine and Ordonez-Sanchez, Stephanie and Johannesen, Kate and Byrne, Carl and Johnstone, Cameron and O'Doherty, Tim and Mason-Jones, Allan (2020) The development, design and characterisation of a scale model Horizontal Axis Tidal Turbine for dynamic load quantification. Renewable Energy, 156. pp. 913-930. ISSN 0960-1481
Fernandes, L. and Friedrich, M. and Cóstola, D. and Matsumoto, E. and Labaki, L. and Wellershoff, F. (2020) Evaluación de los coeficientes de descarga de grandes ventanas que se pueden abrir utilizando muestras a escala real en ensayos en túneles de viento. Revista Ingenieria de Construccion, 35 (2). pp. 203-214. ISSN 0718-5073
Clark, Ruaridh A. and Nikolova, Niia and McGeown, William J. and Macdonald, Malcolm (2020) Eigenvector alignment : assessing functional network changes in amnestic mild cognitive impairment and Alzheimer's disease. PLOS One, 15 (8). e0231294. ISSN 1932-6203
Muirhead (Student), Samuel and Connolly, Stephen (2020) Feasibility of Sliding Sealing Vane for Hyperloop Airlock Application. Carnegie Trust for the Universities of Scotland, Glasgow.
Wilson, Callum and Marchetti, Francesco and Di Carlo, Marilena and Riccardi, Annalisa and Minisci, Edmondo (2020) Classifying intelligence in machines : a taxonomy of intelligent control. Robotics, 9 (3). 64. ISSN 2218-6581
Brownlie, F. and Giourntas, L. and Hodgkiess, T. and Palmeira, I. and Odutayo, O. and Galloway, A. M. and Pearson, A. (2020) Effect of cathodic protection methods on ferrous engineering materials under corrosive wear conditions. Corrosion Engineering Science and Technology, 55 (6). pp. 480-486. ISSN 1743-2782
Yuan, Jie and Schwingshackl, Christoph and Wong, Chian and Salles, Loïc (2020) On an improved adaptive reduced-order model for the computation of steady-state vibrations in large-scale non-conservative systems with friction joints. Nonlinear Dynamics. ISSN 0924-090X
Capobianchi, Paolo and Lappa, Marcello (2020) Particle accumulation structures in non-cylindrical liquid bridges under microgravity conditions. Physical Review Fluids, 5 (8). 084304. ISSN 2469-990X
Acciarini, Giacomo and Greco, Cristian and Vasile, Massimiliano (2020) On the solution of the Fokker-Planck equation without diffusion for uncertainty propagation in orbital dynamics. In: 2020 AAS/AIAA Astrodynamics Specialist Conference, 2020-08-09 - 2020-08-12, Lake Tahoe Resort Hotel.
Manzi, Matteo and Vasile, Massimiliano; (2020) Analysis of stochastic nearly-integrable dynamical systems using polynomial chaos expansions. In: 2020 AAS/AIAA Astrodynamics Specialist Conference. Univelt Inc/ American Astronautical Society, USA.
Muirhead (Student), Samuel and Connolly, Stephen (2020) Feasibility of a push-through hyperloop airlock architecture. In: Carnegie Trust: Vacation Scholars Poster Competition, 2021-08-07 - 2021-08-07, Online Event.
Fotouhi, Mohamad and Damghani, Mahdi and Leong, Mun Choong and Fotouhi, Sakineh and Jalalvand, Meisam and Wisnom, Michael R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245. 112327. ISSN 0263-8223
Mawson, Victoria Jayne and Hughes, Ben Richard (2020) Thermal modelling of manufacturing processes and HVAC systems. Energy, 204. 117984. ISSN 1873-6785
Theodorou, Ilias and Ilioudis, Christos and Clemente, Carmine and Vasile, Massimiliano and Soraghan, John (2020) SISAR imaging for space debris based on nanosatellites. IET Radar Sonar and Navigation, 14 (8). pp. 1192-1201. ISSN 1751-8784
Acciarini, Giacomo and Izzo, Dario and Mooij, Erwin (2020) MHACO : a multi-objective hypervolume-based ant colony optimizer for apace trajectory optimization. In: IEEE World Congress on Computational Intelligence (WCCI) 2020, 2020-07-19 - 2020-07-24, Online.
Zhu, Xuanchen and Chen, Ying and Chen, Haofeng and Luan, Weiling (2020) The diffusion induced stress and cracking behaviour of primary particle for Li-ion battery electrode. International Journal of Mechanical Sciences, 178. 105608. ISSN 0020-7403
Sun, Yekai and Vizzaccaro, Alessandra and Yuan, Jie and Salles, Loïc (2020) An extended energy balance method for resonance prediction in forced response of systems with non-conservative nonlinearities using damped nonlinear normal mode. Nonlinear Dynamics. ISSN 0924-090X
Rehbach, Frederik and Gentile, Lorenzo and Bartz-Beielstein, Thomas; Coello, Carlos Artemio, ed. (2020) Variable reduction for surrogate-based optimization. In: GECCO '20: Proceedings of the 2020 Genetic and Evolutionary Computation Conferenc. ACM, MEX, 1177–1185. ISBN 978-1-4503-7128-5
Deng, Zhongsheng and Xiao, Qing and Yang, Liu (2020) Investigating structural behavior of wind turbine composite blade using FSI method. In: 7th PRIMaRE Conference, 2020-07-07 - 2020-07-08, University of Plymouth and Plymouth Marine Laboratory.
Kokkinakis, Ioannis W. and Drikakis, Dimitris and Youngs, David L. (2020) Two-equation and multi-fluid turbulence models for Richtmyer-Meshkov mixing. Physics of Fluids, 32 (7). 074102. ISSN 1070-6631
Bandivadekar, Deep and Minisci, Edmondo (2020) Modelling and simulation of transpiration cooling systems for atmospheric re-entry. Aerospace, 7 (7). 89. ISSN 2052-451X
Sadiq, Kamran and Sim, Mark A. and Black, Richard A. and Stack, Margaret M. (2020) Mapping the micro-abrasion mechanisms of CoCrMo : some thoughts on varying ceramic counterface diameter on transition boundaries invitro. Lubricants, 8 (7). 71. ISSN 2075-4442
Campobasso, Michele Sergio and Cavazzini, Anna and Minisci, Edmondo (2020) Rapid estimate of wind turbine energy loss due to blade leading edge delamination using artificial neural networks. Journal of Turbomachinery, 142 (7). 071002. ISSN 1528-8900
Kersken, Matthias and Strachan, Paul and Mantesi, Eirini and Flett, Graeme (2020) Whole building validation for simulation programs including synthetic users and heating systems : experimental design. E3S Web of Conferences, 172. 22003. ISSN 2555-0403
Kokkinakis, Ioannis W. and Drikakis, Dimitris and Youngs, David L. (2020) Vortex morphology in Richtmyer–Meshkov-induced turbulent mixing. Physica D: Nonlinear Phenomena, 407. 132459. ISSN 0167-2789
Mandal, Paranjayee and Olasolo, Maider and Da Silva, Laurie and Lalvani, Himanshu (2020) Impact of a multi-step heat treatment on different manufacturing routes of 18CrNiMo7-6 steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). 3009–3029. ISSN 1073-5623
Rasool, Ghulam and El Shafei, Yousuf and Stack, Margaret M. (2020) Mapping tribo-corrosion behaviour of TI-6AL-4V Eli in laboratory simulated hip joint environments. Lubricants, 8 (7). 69. ISSN 2075-4442
Rasool, Ghulam and Middleton, Anna C. and Stack, Margaret M. (2020) Mapping raindrop erosion of GFRP composite wind turbine blade materials : perspectives on degradation effects in offshore and acidic environmental conditions. Journal of Tribology, 142 (6). 061701. ISSN 0742-4787
Shahzad, Sally and Calautit, Katrina and Wei, Shuangyu and Tien, Paige W. and Calautit, John and Hughes, Ben (2020) Analysis of the thermal comfort and energy performance of a thermal chair for open plan office. Journal of Sustainable Development of Energy, Water and Environment Systems, 8 (2). pp. 373-395. ISSN 1848-9257
Su, Wei and Ho, Minh Tuan and Zhang, Yonghao and Wu, Lei (2020) GSIS : an efficient and accurate numerical method to obtain the apparent gas permeability of porous media. Computers and Fluids, 206. 104576. ISSN 0045-7930
Wang, Kaibao and Yang, Liu and Kucharek, Mariusz (2020) Investigation of the effect of thermal insulation materials on packaging performance. Packaging Technology and Science, 33 (6). pp. 227-236. ISSN 0894-3214
Kokkinakis, Ioannis and Drikakis, Dimitris and Ritos, Konstantinos and Spottswood, Stephen (2020) Direct numerical simulation of supersonic flow and acoustics over a compression ramp. Physics of Fluids, 32 (6). 066107. ISSN 1070-6631
Cartmell, Matthew P. and Faller, James E. and Lockerbie, Nicholas A. and Handous, Eva (2020) On the modelling and testing of a laboratory scale Foucault pendulum as a precursor for the design of a high performance measurement instrument. Proceedings of the Royal Society of London Series A: Mathematical Physical and Engineering Sciences, 476 (2238). 20190680. ISSN 1471-2962
Gaurier, Benoît and Ordonez-Sanchez, Stephanie and Facq, Jean-Valéry and Germain, Grégory and Johnstone, Cameron and Martinez, Rodrigo and Salvatore, Francesco and Santic, Ivan and Davey, Thomas and Old, Chris and Sellar, Brian (2020) MaRINET2 tidal energy round robin tests - performance comparison of a horizontal axis turbine subjected to combined wave and current conditions. Journal of Marine Science and Engineering, 8 (6). 463. ISSN 2077-1312
Afsar, M. Z. (2020) The relationship between the surface pressure spectrum and transverse velocity spectrum in a Rapid-distortion theory model of trailing edge noise. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Afsar, M. Z. and Gryazev, V. and Markesteijn, A. and Karabasov, S. (2020) Effect of large-scale mixing on the axisymmetric structure of turbulence correlations in complex dual stream jets. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Afsar, M. Z. and Sescu, A. and Gryazev, V. and Markesteijn, A. and Karabasov, S. (2020) Analysis of the non-parallel flow-based Green's function in the acoustic analogy for complex axisymmetric jets. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Afsar, M. Z. and Sescu, A. and Leib, S. J. (2020) Improved jet noise predictions in subsonic flows using an approximate composite asymptotic expansion of the adjoint Green's function in Goldstein's analogy. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Afsar, M. Z. and Stirrat, S. A. and Kokkinakis, I. W. (2020) Investigation of fast GPU-based algorithms for jet-surface interaction noise calculations. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Horner, Colby and Sescu, Adrian and Afsar, Mohammed and Collins, Eric and Azarpeyvand, Mahdi (2020) Passive noise control strategies for jets exhausting over flat surfaces : an LES study. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.
Mawson, Victoria Jayne and Hughes, Ben Richard (2020) Deep learning techniques for energy forecasting and condition monitoring in the manufacturing sector. Energy and Buildings, 217. 109966. ISSN 0378-7788
Esposito, Antonio and Lappa, Marcello and Zuppardi, Gennaro and Allouis, Christophe and Apicella, Barbara and Commodo, Mario and Minutolo, Patrizia and Russo, Carmela (2020) On the formation and accumulation of solid carbon particles in high-enthalpy flows mimicking re-entry in the Titan atmosphere. Fluids, 5 (2). 93. ISSN 2311-5521
Clark, Ruaridh (2020) Communities of Dynamical Influence. Zenodo.
Afsar, Mohammed and Stirrat, Sarah and McLeod, Lydia (2020) Structure of turbulence prior to rapid-distortion. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Greenlee, George and Afsar, Mohammed and Muhel, Rohella (2020) Investigating incipient separation for an aerofoil at an arbitrary orientation subjected to on oncoming gust. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Johnston, D and Afsar, M (2020) Investigating the effectiveness of Padé-type approximations. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Kelly, Simon and Afsar, Mohammed and Muhel, Rohella and Kokkinakis, Ioannis (2020) How a jet flow interacting with a streamwise/spanwise corrugated surface causes an increase in turbulence kinetic energy. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Knight, Megan and Muhel, Rohella and Afsar, Mohammed and Kokkinakis, Ioannis (2020) Turbulence kinetic energy for an axisymmetric steam jet. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Lappa, Marcello and Burel, Thomas (2020) Symmetry breaking phenomena in thermovibrationally driven particle accumulation structures. Physics of Fluids, 32 (5). 053314. ISSN 1070-6631
Mackay, Magnus and Afsar, Mohammed and Kokkinakis, Ioannis (2020) An LES investigation of the 2D Tollmien-Schlichting wave instability in channel flow. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Meaden, Katherine and Afsar, Mohammed and Muhel, Rohella and Kokkinakis, Ioannis (2020) The Coanda Effect anomaly present in 2D CFD simulations of installed rectangular jets. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Stirrat, S.A. and Afsar, M.Z. and Kokkinakis, I.W. (2020) Investigation of parallel computing for jet-surface interaction noise calculations. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.
Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben (2020) Spatial estimation of outdoor NO2 levels in Central London using deep neural networks and a wavelet decomposition technique. Ecological Modelling, 424. 109017. ISSN 0304-3800
Haeri, Sina and Haeri, Soroush and Hanson, Jack and Lotfian, Saeid (2020) Analysis of radiation pressure and aerodynamic forces acting on powder grains in powder-based additive manufacturing. Powder Technology, 368. pp. 125-129. ISSN 0032-5910
Rasool, Ghulam and Pelaez Larios, Maria and Stack, Margaret (2020) Impact angle and exposure time effects on raindrop erosion of fibre reinforced polymer composites : application to offshore wind turbine conditions. Tribology Transactions. ISSN 1040-2004 (In Press)
Ritos, Konstantinos and Drikakis, Dimitris and Kokkinakis, Ioannis W. and Spottswood, S. Michael (2020) Computational aeroacoustics beneath high speed transitional and turbulent boundary layers. Computers and Fluids, 203. 104520. ISSN 0045-7930
Naghshbandi, S. Neda and Varga, Liz and Purvis, Alan and McWilliam, Richard and Minisci, Edmondo and Vasile, Massimiliano and Troffaes, Matthias and Sedighi, Tabassom and Guo, Weisi and Manley, Ed and Jones, David H. (2020) A review of methods to study resilience of complex engineering and engineered systems. IEEE Access, 8. pp. 87775-87799. ISSN 2169-3536
Yang, Jie and Liu, Yuman and Chen, Haofeng (2020) A study on the matching of constraint between steam turbine blade and laboratory specimens. Advances in Mechanical Engineering, 12 (5). pp. 1-11. ISSN 1687-8140
Barbera, Daniele and Chen, Haofeng (2020) On the plastic strain accumulation in notched bars during high-temperature creep dwell. Journal of Mechanics, 36 (2). pp. 167-176. ISSN 1727-7191
McGrath, Ciara N. and Macdonald, Malcolm (2020) General perturbation method for satellite constellation deployment using nodal precession. Journal of Guidance, Control and Dynamics, 43 (4). pp. 814-824. ISSN 1533-3884
Zografos, Konstantinos and Hartt, William and Hamersky, Mark and Oliveira, Monica S.N. and Alves, Manuel A. and Poole, Robert J. (2020) Viscoelastic fluid flow simulations in the e-VROCTM geometry. Journal of Non-Newtonian Fluid Mechanics, 278. 104222. ISSN 0377-0257
Su, Wei and Zhu, Lianhua and Wang, Peng and Zhang, Yonghao and Wu, Lei (2020) Can we find steady-state solutions to multiscale rarefied gas flows within dozens of iterations? Journal of Computational Physics, 407. 109245. ISSN 0021-9991
Wadge, Matthew D. and Turgut, Burhan and Murray, James W. and Stuart, Bryan W. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2020) Developing highly nanoporous titanate structures via wet chemical conversion of DC magnetron sputtered titanium thin films. Journal of Colloid and Interface Science, 566. pp. 271-283. ISSN 0021-9797
Zhou, Bochao and Pei, Jianzhong and Hughes, Ben Richard and Nasir, Diana SNM and Zhang, Jiupeng (2020) Analysis of mechanical properties for two different structures of photovoltaic pavement unit block. Construction and Building Materials, 239. 117864. ISSN 0950-0618
Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben (2020) Short- and long-term forecasting of ambient air pollution levels using wavelet-based non-linear autoregressive artificial neural networks with exogenous inputs. International Journal of Environmental Impacts, 3 (2). pp. 143-154. ISSN 2398-2640
Nasir, Siti Diana and Xu, Weijie and Vital, Becky and Pantua, Conrad and Zhou, Bochao and Calautit, John and Hughes, Ben (2020) Urban road and pavement solar collector system for heat island mitigation : assessing the beneficial impact on outdoor temperature. IOP Conference Series: Earth and Environmental Science, 463. 12038. ISSN 1755-1315
Zhou, Q. and Fidalgo, J. and Calvi, L. and Bernabeu, M. O. and Hoskins, P. R. and Oliveira, M. S. N. and Krüger, T. (2020) Spatio-temporal dynamics of dilute red blood cell suspensions in low-inertia microchannel flow. Biophysical Journal, 118 (10). pp. 2561-2573. ISSN 0006-3495
Dai, Yue and Yang, Jie and Chen, Haofeng (2020) Effect range of the material constraint in different strength mismatched laboratory specimens. Applied Sciences, 10 (7). 2434. ISSN 2076-3417
Ricciardi, Lorenzo and Maddock, Christie and Vasile, Massimiliano; (2020) Robust trajectory optimisation of a TSTO spaceplane using uncertainty-based atmospheric models. In: 23rd AIAA International Space Planes and Hypersonic Systems and Technologies Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, Reston, VA.. ISBN 9781624106002
Yuan, Jie and Salles, Loic and El Haddad, Fadi and Wong, Chian (2020) An adaptive component mode synthesis method for dynamic analysis of jointed structure with contact friction interfaces. Computers and Structures, 229. 106177. ISSN 0045-7949
Zhang, Ya and Pan, Guang and Zhang, Yonghao and Haeri, Sina (2020) A relaxed multi-direct-forcing immersed boundary-cascaded lattice Boltzmann method accelerated on GPU. Computer Physics Communications, 248. 106980. ISSN 0010-4655
Zekos, Iasonas and McMeekin, Kristoffer and Stack, Margaret M. (2020) On the effect of pre-formed scales in mitigating corrosion of steels in CO2 environments. Journal of Bio- and Tribo-Corrosion, 6 (2). 56. ISSN 2198-4220
Kampleitner, Carina and Changi, Katayoon and Felfel, Reda M. and Scotchford, Colin A. and Sottile, Virginie and Kluger, Rainer and Hoffmann, Oskar and Grant, David M. and Epstein, Michelle M. (2020) Preclinical biological and physicochemical evaluation of two-photon engineered 3D biomimetic copolymer scaffolds for bone healing. Biomaterials Science, 8 (6). pp. 1683-1694. ISSN 2047-4830
Kyriakou, Faidon and Dempster, William and Nash, David (2020) Analysing the cross-section of the abdominal aortic aneurysm neck and its effects on stent deployment. Scientific Reports, 10 (1). 4673. ISSN 2045-2322
Cartmell, Matthew P. (2020) Lense-Thirring Precession - Theoretical Narrative. University of Strathclyde, Glasgow.
Frank, Michael and Drikakis, Dimitris and Charissis, Vassilis (2020) Machine-learning methods for computational science and engineering. Computation, 8 (1). 15. ISSN 1866-9964
Haeri, S. and Benedetti, L. and Ghita, O. (2020) Effects of particle elongation on the binary coalescence dynamics of powder grains for Laser sintering applications. Powder Technology, 363. pp. 245-255. ISSN 0032-5910
Kucharek, Mariusz and Yang, Liu and Wang, Kaibao (2020) Assessment of insulating package performance by mathematical modelling. Packaging Technology and Science, 33 (2). pp. 65-73. ISSN 0894-3214
Ma, Zhiyuan and Chen, Haofeng and Liu, Yinghua and Xuan, Fu-Zhen (2020) A direct approach to the evaluation of structural shakedown limit considering limited kinematic hardening and non-isothermal effect. European Journal of Mechanics - A/Solids, 79. 103877. ISSN 0997-7538
Porter, Kate E. and Ordonez-Sanchez, Stephanie E. and Murray, Robynne E. and Allmark, Matthew and Johnstone, Cameron M. and O'Doherty, Tim and Mason-Jones, Allan and Doman, Darrel A. and Pegg, Michael J. (2020) Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading. Journal of Fluids and Structures, 93. 102825. ISSN 0889-9746
Zong, Chaoyong and Zheng, Fengjie and Chen, Dianjing and Dempster, William and Song, Xueguan (2020) Computational fluid dynamics analysis of the flow force exerted on the disk of a direct-operated pressure safety valve in energy system. Journal of Pressure Vessel Technology, Transactions of the ASME, 142 (1). 011702. ISSN 0094-9930
Mazzarella, Luca and Lowe, Christopher and Lowndes, David and Joshi, Siddarth Koduru and Greenland, Steve and McNeil, Doug and Mercury, Cassandra and Macdonald, Malcolm and Rarity, John and Oi, Daniel Kuan Li (2020) QUARC : Quantum Research Cubesat - a constellation for quantum communication. Cryptography, 4 (1). 7. ISSN 2410-387X
Coe, Samuel C. and Wadge, Matthew D. and Felfel, Reda M. and Ahmed, Ifty and Walker, Gavin S. and Scotchford, Colin A. and Grant, David M. (2020) Production of high silicon-doped hydroxyapatite thin film coatings via magnetron sputtering : deposition, characterisation, and in vitro biocompatibility. Coatings, 10 (2). 190. ISSN 2079-6412
Thomason, James (2020) A review of the analysis and characterisation of polymeric glass fibre sizings. Polymer Testing. 106421. ISSN 0142-9418
Cao, J. and Clemente, C. and McInnes, C. R. and Soraghan, J. J. (2020) Solar radiation pressure enabled femtosatellite based Earth remote sensing. IEEE Transactions on Aerospace and Electronic Systems. ISSN 0018-9251
Su, Wei and Wang, Peng and Zhang, Yonghao and Wu, Lei (2020) Implicit discontinuous Galerkin method for the Boltzmann equation. Journal of Scientific Computing, 82 (2). 39. ISSN 0885-7474
Black, Scott and Ritos, Konstantinos and Maclean, Craig and Brodie, Robbie and Kazakidi, Asimina (2020) Blood flow analysis of the aortic arch using computational fluid dynamics in a coupled 3D-0D framework. In: 23rd Annual Meeting Scottish Cardiovascular Forum 2020, 2020-02-01 - 2020-02-01, Strathclyde Institute for Pharmacy & Biomedical Sciences, University of Strathclyde.
Chaparian, Emad and Izbassarov, Daulet and De Vita, Francesco and Brandt, Luca and Tammisola, Outi (2020) Yield-stress fluids in porous media : a comparison of viscoplastic and elastoviscoplastic flows. Meccanica, 55 (2). pp. 331-342. ISSN 0025-6455
Uzzaman, Asraf and Lim, James B.P. and Nash, David and Roy, Krishanu (2020) Cold-formed steel channel sections under end-two-flange loading condition: Design for edge-stiffened holes, unstiffened holes and plain webs. Thin-Walled Structures, 147. 106532. ISSN 0263-8231
Kyriakou, Faidon and Bow, David and Dempster, William and Brodie, Robbie and Nash, David (2020) Evaluation of a new approach for modelling full ring stent bundles with the inclusion of manufacturing strains. Annals of Biomedical Engineering, 48 (1). pp. 144-156. ISSN 0090-6964
Lowe, Christopher J. and Macdonald, Malcolm (2020) Space mission resilience with inter-satellite networking. Reliability Engineering and System Safety, 193. 106608. ISSN 0951-8320
Polnik, Mateusz and Mazzarella, Luca and Di Carlo, Marilena and Oi, Daniel KL and Riccardi, Annalisa and Arulselvan, Ashwin (2020) Scheduling of space to ground quantum key distribution. EPJ Quantum Technology, 7. 3. ISSN 2196-0763
Roy, Manish and Stack, Margaret M. (2020) Tribo-Corrosion V 2016–a return to Hyderabad. Tribology International, 141. 105945. ISSN 0301-679X
Esposito, A. and Lappa, M. (2020) Extension of the Frozen Sonic Flow Method to mixtures of polyatomic gases. AIAA Journal, 58 (1). pp. 265-277. ISSN 0001-1452
Dunn, Martin and Wheel, Marcus (2020) Size effect anomalies in the behaviour of loaded 3D mechanical metamaterials. Philosophical Magazine, 100 (2). pp. 139-156. ISSN 1478-6435
Clarke, Joseph Andrew (2020) Why tools for buildings and cities performance simulation need to evolve. Buildings & Cities.
Sánchez, Luis and Vasile, Massimiliano and Minisci, Edmondo (2020) On the use of machine learning and evidence theory to improve collision risk management. In: 2nd IAA Conference in Space Situational Awareness, 2020-01-14 - 2020-01-16, Hilton Arlington.
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed (2020) Nonlinear centrifugal instabilities in curved free shear layers. In: American Institute of Aeronautics and Astronautics (AIAA) SciTech Forum, 2020-01-06 - 2020-01-10, Hyatt Regency Orlando.
Sescu, Adrian and Afsar, Mohammed and Hattori, Yuji (2020) Streaks in high-speed boundary layers : assessment via the full nonlinear boundary-region equations. In: American Institute of Aeronautics and Astronautics (AIAA) SciTech Forum, 2020-01-06 - 2020-01-10, Hyatt Regency Orlando.
Wilson, Callum and Marchetti, Francesco and Di Carlo, Marilena and Riccardi, Annalisa and Minisci, Edmondo (2020) Intelligent control : a taxonomy. In: 8th International Conference on Systems and Control, 2019-10-23 - 2019-10-25, Faculty of sciences Semlalia, Cadi Ayyad University.
Chaparian, Emad and Tammisola, Outi (2020) Stability of particles inside yield-stress fluid Poiseuille flows. Journal of Fluid Mechanics, 885. 1038. ISSN 0022-1120
Berquand, Audrey and Moshfeghi, Yashar and Riccardi, Annalisa; (2020) Space mission design ontology : extraction of domain-specific entities and concepts similarity analysis. In: AIAA Scitech 2020 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, USA, pp. 1-13. ISBN 9781624105951
Greco, Cristian and Campagnola, Stefano and Vasile, Massimiliano (2020) Robust space trajectory design using belief stochastic optimal control. In: American Institute of Aeronautics and Astronautics (AIAA) SciTech Forum, 2020-01-06 - 2020-01-10, Hyatt Regency Orlando.
Muñoz-Escalona, P. and Sillars, F. and Marrocco, T. and Edgar, R. and Mridha, S. and Baker, T. N. (2020) Silicon carbide particulates incorporated into microalloyed steel surface using TIG : microstructure and properties. Materials Science and Technology (United Kingdom), 36 (1). pp. 17-32. ISSN 0267-0836
Dai, Yanwei and Liu, Yinghua and Qin, Fei and Chao, Yuh J. and Chen, Haofeng (2020) Constraint modified time dependent failure assessment diagram (TDFAD) based on C(t)-A2(t) theory for creep crack. International Journal of Mechanical Sciences, 165. 105193. ISSN 0020-7403
Gong, Baichun and Li, Shuang and Zheng, Lili and Feng, Jinglang (2020) Analytic initial relative orbit solution for angles-only space rendezvous using hybrid dynamics method. CMES - Computer Modeling in Engineering and Sciences, 122 (1). pp. 221-234. ISSN 1526-1506
Parsons, Andrew J. and Felfel, Reda M. and Wadge, Matthew D. and Grant, David M. (2020) Improved phosphate-based glass fiber performance achieved through acid etch/polydopamine treatment. International Journal of Applied Glass Science, 11 (1). pp. 35-45. ISSN 2041-1294
Thomason, James and Rudeiros Fernandez, Jose Luis (2020) Evaluation of injection moulded natural fibre-polyolefin for potential in automotive applications. Materials Today: Proceedings, 31 (sup 2). S201-S205. ISSN 2214-7853
2019
Barnes, Andrew and Hughes, Ben (2019) Determining the impact of VAWT farm configurations on power output. Renewable Energy, 143. pp. 1111-1120. ISSN 0960-1481
Filippi, Gianluca and Vasile, Massimiliano and Krpelik, Daniel and Korondi, Peter Zeno and Marchi, Mariapia and Poloni, Carlo (2019) Space systems resilience optimisation under epistemic uncertainty. Acta Astronautica, 165. pp. 195-210. ISSN 0094-5765
Zhu, Lianhua and Wang, Peng and Chen, Songze and Guo, Zhaoli and Zhang, Yonghao (2019) GPU acceleration of an iterative scheme for gas-kinetic model equations with memory reduction techniques. Computer Physics Communications, 245. 106861. ISSN 0010-4655
Zhu, Lianhua and Wu, Lei and Zhang, Yonghao and Sharipov, Felix (2019) Ab initio calculation of rarefied flows of helium-neon mixture : classical vs quantum scatterings. International Journal of Heat and Mass Transfer, 145. 118765. ISSN 0017-9310
Zografos, Konstantinos and Haward, Simon J. and Oliveira, Mónica S. N. (2019) Optimised multi-stream microfluidic designs for controlled extensional deformation. Microfluidics and Nanofluidics, 23 (12). 131. ISSN 1613-4982
Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2019) Rapid distortion theory on transversely sheared mean flows of arbitrary cross section. Journal of Fluid Mechanics, 881. pp. 551-584. ISSN 0022-1120
Greco, Cristian and Di Carlo, Marilena and Vasile, Massimiliano and Epenoy, Richard (2019) Direct multiple shooting transcription with polynomial algebra for optimal control problems under uncertainty. Acta Astronautica. ISSN 0094-5765
Wu, Lei (2019) A fast spectral method for the Uehling-Uhlenbeck equation for quantum gas mixtures : homogeneous relaxation and transport coefficients. Journal of Computational Physics, 399. pp. 1-27. 108924. ISSN 0021-9991
Cavazzini, Anna and Minisci, Edmondo and Campobasso, M. Sergio; (2019) Machine learning-aided assessment of wind turbine energy losses due to blade leading edge damage. In: ASME 2019 2nd International Offshore Wind Technical Conference. American Society of Mechanical Engineers (ASME), MLT. ISBN 978-0-7918-5935-3
Clark, Ruaridh and Nikolova, Niia and Macdonald, Malcolm and McGeown, William J. (2019) Network influence based classification and comparison of neurological conditions. In: Complex Networks 2019, 2019-12-10 - 2019-12-12.
Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Higher-order and higher floating-point precision numerical approximations of finite strain elasticity moduli. International Journal for Numerical Methods in Engineering, 120 (10). pp. 1184-1201. ISSN 0029-5981
Sharpe, Tim and McGill, Grainne and McQuillan, Jonathan and Lantschner, Barabara and Morgan, Chris and Tuohy, Paul (2019) Ability of Decentralised Mechanical Ventilation to Act as 'Whole-house' Ventilation Systems in New-build Dwellings. The Scottish Government, Edinburgh.
Pascarella, Gaetano and Kokkinakis, Ioannis and Fossati, Marco (2019) Analysis of transition for a flow in a channel via reduced basis methods. Fluids, 4 (4). 202.
Afsar, Mohammed Z. and Sescu, Adrian and Leib, Stewart J. (2019) Modelling and prediction of the peak-radiated sound in subsonic axisymmetric air jets using acoustic analogy-based asymptotic analysis. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2159). 20190073. ISSN 1471-2962
Karabasov, Sergey and Ayton, Lorna and Wu, Xuesong and Afsar, Mohammed (2019) Advances in aeroacoustics research : recent developments and perspectives. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2159). pp. 1-4. ISSN 1471-2962
Pascarella, G. and Fossati, M. and Barrenechea, G. (2019) Impact of POD modes energy redistribution on flow reconstruction for unsteady flows of impulsively started airfoils and wings. International Journal of Computational Fluid Dynamics. ISSN 1029-0257
Chen, Xiaohui and Chen, Haofeng and Zhao, Li (2019) Ratcheting behavior of pressurized corroded straight pipe subjected to cyclic bending. Thin-Walled Structures, 145. pp. 1-16. 106410. ISSN 0263-8231
Dai, Yanwei and Liu, Yinghua and Chen, Haofeng (2019) Numerical investigations on the effects of T-stress in mode I creep crack. International Journal of Computational Methods, 16 (8). 1841002. ISSN 1793-6969
Shahzad, Sally and Calautit, John Kaiser and Hughes, Ben Richard and Satish, B. K. and Rijal, Hom B. (2019) Patterns of thermal preference and Visual Thermal Landscaping model in the workplace. Applied Energy, 255. 113674. ISSN 0306-2619
Song, Jingwen and Wei, Pengfei and Valdebenito, Marcos and Bi, Sifeng and Broggi, Matteo and Beer, Michael and Lei, Zuxiang (2019) Generalization of non-intrusive imprecise stochastic simulation for mixed uncertain variables. Mechanical Systems and Signal Processing, 134. 106316. ISSN 0888-3270
Thomason, J. L. (2019) Glass fibre sizing : a review. Composites Part A: Applied Science and Manufacturing, 127. 105619. ISSN 1359-835X
Walsh, Angélica and Cóstola, Daniel and Labaki, Lucila (2019) Validation of the climatic zoning defined by ASHRAE standard 169-2013. Energy Policy, 135. 111016. ISSN 1873-6777
Chen, Boshan and Roy, Krishanu and Uzzaman, Asraf and Raftery, Gary M. and Nash, David and Clifton, G. Charles and Pouladi, P. and Lim, James B.P. (2019) Effects of edge-stiffened web openings on the behaviour of cold-formed steel channel sections under compression. Thin-Walled Structures, 144. 106307. ISSN 0263-8231
Chen, Xiaohui and Fang, Shuang and Chen, Haofeng (2019) Stress concentration factor and fatigue analysis of a lateral nozzle with local wall thinning. Engineering Failure Analysis, 105. pp. 289-304. ISSN 1350-6307
Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Isotropic hyperelasticity in principal stretches : explicit elasticity tensors and numerical implementation. Computational Mechanics, 64 (5). pp. 1273-1288. ISSN 0178-7675
Lappa, Marcello (2019) On the gravitational suppression of hydrothermal modes in liquid layers with a blockage on the bottom wall. International Journal of Thermal Sciences, 145. 105987. ISSN 1290-0729
Lyden, Andrew and Tuohy, Paul; (2019) Heat pump and thermal storage sizing with time-of-use electricity pricing. In: Proceedings of the 13th International Renewable Energy Storage Conference 2019 (IRES 2019). Atlantis Highlights in Engineering . Atlantis Press, DEU, pp. 29-40. ISBN 9789462528369
Okorokov, Volodymyr and Gorash, Yevgen and MacKenzie, Donald and van Rijswick, Ralph (2019) New formulation of nonlinear kinematic hardening model, part I : a Dirac delta function approach. International Journal of Plasticity, 122. pp. 89-114. ISSN 0749-6419
Okorokov, Volodymyr and Gorash, Yevgen and MacKenzie, Donald and van Rijswick, Ralph (2019) New formulation of nonlinear kinematic hardening model, part II : cyclic hardening/softening and ratcheting. International Journal of Plasticity, 122. pp. 244-257. ISSN 0749-6419
Wang, Peng and Wu, Lei and Ho, Minh-Tuan and Li, Jun and Li, Zhui-Hui and Zhang, Yonghao (2019) The kinetic Shakhov-Enskog model for non-equilibrium flow of dense gases. Journal of Fluid Mechanics. pp. 1-22. ISSN 0022-1120
Clark, Ruaridh and Punzo, Giuliano and Macdonald, Malcolm (2019) Network communities of dynamical influence. Scientific Reports, 9. 17590. ISSN 2045-2322
Schweiker, Marcel and Abdul-Zahra, Amar and André, Maíra and Al-Atrash, Farah and Al-Khatri, Hanan and Alprianti, Rea Risky and Alsaad, Hayder and Amin, Rucha and Ampatzi, Eleni and Arsano, Alpha Yacob and Azadeh, Montazami and Azar, Elie and Bahareh, Bannazadeh and Batagarawa, Amina and Becker, Susanne and Buonocore, Carolina and Cao, Bin and Choi, Joon-Ho and Chun, Chungyoon and Daanen, Hein and Damiati, Siti Aisyah and Daniel, Lyrian and Vecchi, Renata De and Dhaka, Shivraj and Domínguez-Amarillo, Samuel and Dudkiewicz, Edyta and Edappilly, Lakshmi Prabha and Fernández-Agüera, Jesica and Folkerts, Mireille and Frijns, Arjan and Gaona, Gabriel and Garg, Vishal and Gauthier, Stephanie and Jabbari, Shahla Ghaffari and Harimi, Djamila and Hellwig, Runa T. and Huebner, Gesche M. and Jin, Quan and Jowkar, Mina and Kania, Renate and Kim, Jungsoo and King, Nelson and Kingma, Boris and Koerniawan, M. Donny and Kolarik, Jakub and Kumar, Shailendra and Kwok, Alison and Lamberts, Roberto and Laska, Marta and Lee, M. C. Jeffrey and Lee, Yoonhee and Lindermayr, Vanessa and Mahaki, Mohammadbagher and Marcel-Okafor, Udochukwu and Marín-Restrepo, Laura and Marquardsen, Anna and Martellotta, Francesco and Mathur, Jyotirmay and McGill, Gráinne and Mino-Rodriguez, Isabel and Mou, Di and Moujalled, Bassam and Nakajima, Mia and Ng, Edward and Okafor, Marcellinus and Olweny, Mark and Ouyang, Wanlu and Papst de Abreu, Ana Ligia and Pérez-Fargallo, Alexis and Rajapaksha, Indrika and Ramos, Greici and Rashid, Saif and Reinhart, Christoph F. and Rivera, Ma. Isabel and Salmanzadeh, Mazyar and Schakib-Ekbatan, Karin and Schiavon, Stefano and Shooshtarian, Salman and Shukuya, Masanori and Soebarto, Veronica and [Unknown], Suhendri and Tahsildoost, Mohammad and Tartarini, Federico and Teli, Despoina and Tewari, Priyam and Thapa, Samar and Trebilcock, Maureen and Trojan, Jörg and Tukur, Ruqayyatu B. and Voelker, Conrad and Yam, Yeung and Yang, Liu and Zapata-Lancaster, Gabriela and Zhai, Yongchao and Zhu, Yingxin and Zomorodian, Zahra Sadat (2019) The Scales Project, a cross-national dataset on the interpretation of thermal perception scales : [Data descriptor]. Scientific Data, 6 (1). 289. ISSN 2052-4463
Kyriakou, Faidon and Dempster, William and Nash, David (2019) A methodology to quantify the geometrical complexity of the abdominal aortic aneurysm. Scientific Reports, 9. 17379. ISSN 2045-2322
Herrnsdorf, Johannes and Griffiths, Alexander D. and Lowe, Christopher and Macdonald, Malcolm and Strain, Michael J. and Dawson, Martin D. (2019) Towards using LED arrays for relative alignment of cube satellite clusters. In: IEEE Photonics Conference 2019, 2019-09-29 - 2019-10-03.
Marchetti, Francesco and Minisci, Edmondo and Riccardi, Annalisa (2019) Towards intelligent control via genetic programming. In: 5th European Optimisation in Space Engineering Workshop, 2019-11-21 - 2019-11-22.
Mohammadi, Saeed (2019) Energy autonomous buildings : a review. In: 7th International Energy Conference, November 2019-Kuwait, 2019-11-18 - 2019-11-21.
Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2019) Investigation of the stresses and interaction effects of nozzle-cylinder intersections when subject to multiple external loads. In: ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 3 . ASME, USA. ISBN 9780791858943
Puliyaneth, Manu and Chen, Haofeng and Luan, Weiling; (2019) Cyclic plasticity analysis of welded joint with welding residual stress using the direct method. In: ASME 2019 Pressure Vessels & Piping Conference. ASME, USA. ISBN 9780791858974
Papanikolaou, Michail and Salonitis, Konstantinos and Jolly, Mark and Frank, Michael (2019) Large-scale molecular dynamics simulations of homogeneous nucleation of pure aluminium. Metals, 9 (11). 1217. ISSN 2075-4701
Lappa, Marcello (2019) On the highly unsteady dynamics of multiple thermal buoyant jets in cross flows. Physics of Fluids, 31 (11). 115105. ISSN 1070-6631
Sescu, Adrian and Afsar, Mohammed and Hattori, Yuji (2019) Streak growth in high-speed boundary layers : assessment through the compressible boundary region equations. In: Sixteenth International Conference on Flow Dynamics, 2019-11-06 - 2019-11-08, Tohoku University.
Afsar, Mohammed (2019) Improved predictions of trailing-edge noise using rapid-distortion theory and CFD data. In: Sixteenth International Conference on Flow Dynamics, 2019-11-06 - 2019-11-08, Tohoku University.
Afsar, Mohammed (2019) A general approach to modeling jet-turbulence interaction problems using rapid-distortion theory. In: Sixteenth International Conference on Flow Dynamics, 2019-11-06 - 2019-11-08, Tohoku University.
Cho, Nak-Kyun and Wang, Run-Zi and Ma, Zhiyuan and Chen, Haofeng and Xuan, Fu-Zhen (2019) Creep-fatigue endurance of a superheater tube plate under non-isothermal loading and multi-dwell condition. International Journal of Mechanical Science, 161-162. 105048. ISSN 0020-7403
Feng, Jinglang and Hou, Xiyun and Armellin, Roberto (2019) Survey on studies about model uncertainties in small body explorations. Progress in Aerospace Sciences, 110. 100549. ISSN 0376-0421
Wang, Run-Zi and Guo, Su-Juan and Chen, Haofeng and Wen, Jian-Feng and Zhang, Xian-Cheng and Tu, Shan-Tung (2019) Multi-axial creep-fatigue life prediction considering history-dependent damage evolution : a new numerical procedure and experimental validation. Journal of the Mechanics and Physics of Solids, 131. pp. 313-336. ISSN 0022-5096
Zheng, Feng Jie and Zong, Chao Yong and Dempster, William and Qu, Fu Zheng and Song, Xue Guan (2019) A multidimensional and multiscale model for pressure analysis in a reservoir-pipe-valve system. Journal of Pressure Vessel Technology, Transactions of the ASME, 141 (5). 051603. ISSN 0094-9930
Zhu, Lianhua and Guo, Zhaoli (2019) Application of discrete unified gas kinetic scheme to thermally induced nonequilibrium flows. Computers and Fluids, 193. 103613. ISSN 0045-7930
Berquand, Audrey and McDonald, Iain and Riccardi, Annalisa and Moshfeghi, Yashar (2019) The automatic categorisation of space mission requirements for the Design Engineering Assistant. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Filippi, Gianluca and Vasile, Massimiliano (2019) Evidence-based resilience engineering of dynamic space systems. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Gentile, Lorenzo and Greco, Cristian and Minisci, Edmondo and Bartz-Beielstein, Thomas and Vasile, Massimiliano (2019) An optimization approach for designing optimal tracking campaigns for low-resources deep-space missions. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Graça Marto, Simão and Vasile, Massimiliano and Epenoy, Richard (2019) Multi-objective robust trajectory optimisation under epistemic uncertainty and imprecision. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Walker, Lewis and Vasile, Massimiliano (2019) Capabilities of a nano-LIDAR for future reconnaissance missions to NEOs. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Zhang, Shuai and Liu, Mingyong and Lei, Xiaokang and Yang, Panpan and Huang, Yunke and Clark, Ruaridh (2019) Group chase and escape with prey's anti-attack behavior. Physics Letters A, 383 (30). 125871. ISSN 0375-9601
Maddock, Christie and Ricciardi, Lorenzo Angelo and Toso, Federico and Vasile, Massimiliano (2019) Multidisciplinary design analysis of a semi-reusable two-stage-to-orbit small payload launch system. In: International Astronautical Congress 2019, 2019-10-21 - 2019-10-25.
McGrath, Ciara and Dickeson, Zach (2019) Satellite data on demand. In: VisNET Collaboration Event, 2019-10-24 - 2019-10-25, Glasgow Women's Library.
Sánchez, Luis and Vasile, Massimiliano and Minisci, Edmondo (2019) AI to support decision making in collision risk assessment. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
McGrath, Ciara N. and Clark, Ruaridh A. and Werkmeister, Astrid and Macdonald, Malcolm (2019) Small satellite operations planning for agile disaster response using graph theoretical techniques. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Feng, Jinglang and Santeramo, Danielle and Di Lizia, Pierluigi and Armellin, Roberto and Hou, Xiyun (2019) Stability indicator of orbital motion around asteroids with automatic domain splitting. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.
Afsar, M. Z. and Sescu, A. and Sassanis, V. (2019) Effect of non-parallel mean flow on the acoustic spectrum of heated supersonic jets : explanation of 'jet quietening'. Physics of Fluids B. ISSN 2163-503X
Millan, Robyn M. and von Steiger, Rudolf and Meir, Ariel and Bartalev, Sergey and Borgeaud, Maurice and Campagnola, Stefano and Castillo-Rogez, Julie C. and Fléron, Réne and Gass, Volker and Gregorio, Anna and Klumpar, David M. and Lal, Bhavya and Macdonald, Malcolm and Park, Jong Uk and Rao, V. Sambasiva and Schilling, Klaus and Stephens, Graeme and Title, Alan M. and Wu, Ji (2019) Small satellites for space science : A COSPAR scientific roadmap. Advances in Space Research, 64 (8). pp. 1466-1517. ISSN 0273-1177
Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2019) Sound generation due to the interaction of turbulence with surfaces embedded in transversely sheared flow. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2159). 20190076. ISSN 1471-2962
Chen, Xiaohui and Chen, Haofeng and Chen, Xu (2019) 基于线性匹配方法的核电站弯管在循环载荷下的安定性分析. China Mechanical Engineering, 30 (19). pp. 2269-2275. ISSN 1004-132X
Pugh, K. and Nash, J.W.K. and Stack, M.M. and Reaburn, G. (2019) Review of analytical techniques for assessing rain drop erosion resistance of materials. In: 14th Conference on Sustainable Development of Energy, Water and Environment Systems, 2019-10-01 - 2019-10-06.
Stindt, Tristan and Merrifield, Jim and Fossati, Marco and Ricciardi, Lorenzo Angelo and Maddock, Christie Alisa and West, Michael and Kontis, Kostantinos and Farkin, Bernard and McIntyre, Stuart (2019) Aerodynamic database development for a future reusable space launch vehicle, the Orbital 500R. In: International Conference on Flight Vehicles, Aerothermodynamics and Reentry Missions & Engineering, 2019-09-30 - 2019-10-03, Monopoli.
Gong, Jian-Guo and Cheng, Gong and Xuan, Fu-Zhen and Chen, Haofeng (2019) Notch effect on structural strength of components at elevated temperature under creep, fatigue and creep-fatigue loading conditions : phenomenon and mechanism. Journal of Pressure Vessel Technology, 141 (5). 050801. ISSN 0094-9930
Poole, R J and Davoodi, M and Zografos, K (2019) On the similarities between the simplified Phan-Thien Tanner (sPTT) and FENE-P models. The British Society of Rheology Bulletin, 60. pp. 29-34.
Touliatou, Dimitra and Wheel, Marcus A. (2019) Experimental and numerical analysis of size effects on stress intensity in anisotropic porous materials. Engineering Failure Analysis, 104. pp. 772-783. ISSN 1350-6307
Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) Microstructural damage mechanics-based model for creep fracture of 9%Cr steel under prior fatigue loading. Theoretical and Applied Fracture Mechanics, 103. 102269. ISSN 0167-8442
Zheng, Xiaotao and Wei, Fen and Chen, Haofeng and Guo, Sujuan and Xuan, Fuzhen (2019) Measurement of small rotation angle of flange joints by a novel flexure magnifying mechanism. Measurement, 145. pp. 244-253. ISSN 1873-412X
Bhattarai, S. and Ziebart, M. and Allgeier, S. and Grey, S. and Springer, T. and Harrison, D. and Li, Z. (2019) Demonstrating developments in high-fidelity analytical radiation force modelling methods for spacecraft with a new model for GPS IIR/IIR-M. Journal of Geodesy, 93 (9). pp. 1515-1528. ISSN 0949-7714
Esposito, Antonio and Lappa, Marcello and Zuppardi, Gennaro and Allouis, Christophe and Apicella, Barbara and Commodo, Mario and Minutolo, Patrizia and Russo, Carmela (2019) Solid carbon produced during the simulation of re-entry in the Titan atmosphere by means of an arc-driven flow facility. In: International Conference on Flight Vehicles, Aerothermodynamics and Reentry Missions & Engineering, 2019-09-30 - 2019-10-03, Monopoli.
Feng, J. and Hou, X.-Y. (2019) The secular dynamics around small bodies with solar radiation pressure. Communications in Nonlinear Science and Numerical Simulation, 76. pp. 71-91. ISSN 1007-5704
Gentile, Lorenzo and Greco, Cristian and Minisci, Edmondo and Bartz-Beielstein, Thomas and Vasile, Massimiliano; (2019) Structured-chromosome GA optimisation for satellite tracking. In: GECCO '19 Proceedings of the Genetic and Evolutionary Computation Conference Companion. ACM, Prague, Czech Republic, pp. 1955-1963. ISBN 978145067486
Ricciardi, Lorenzo A. and Maddock, Christie Alisa and Vasile, Massimiliano and Stindt, Tristan and Merrifield, Jim and Fossati, Marco and West, Michael and Kontis, Konstantinos and Farkin, Bernard and McIntyre, Stuart (2019) Robust multi-objective optimisation of a descent guidance strategy for a TSTO spaceplane. In: International Conference on Flight vehicles, Aerothermodynamics and Re-entry Missions and Engineering, 2019-09-30 - 2019-10-03, Torre Cintola Nature Sea Resort.
Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) A modified constitutive model for tensile deformation of 9%Cr steel under prior fatigue loading. Mechanics of Materials, 136. 103093. ISSN 0167-6636
Vasile, Massimiliano; Baù, Giulio and Celletti, Alessandra and Galeş, Cătălin Bogdan and Gronchi, Giovanni Federico, eds. (2019) Multi-objective optimal control : a direct approach. In: Satellite Dynamics and Space Missions. Springer INdAM Series . Springer, Cham, Switzerland, pp. 257-289. ISBN 9783030206338
Vasile, Massimiliano; Baù, Giulio and Celletti, Alessandra and Galeş, Cătălin Bogdan and Gronchi, Giovanni Federico, eds. (2019) Practical uncertainty quantification in orbital mechanics. In: Satellite Dynamics and Space Missions. Springer INdAM Series . Springer, Cham, Switzerland, pp. 291-328. ISBN 9783030206338
Minisci, Edmondo and Scardigli, Angela and Gallizio, Federico (2019) Propagation of boundary and geometrical uncertainties for the aeroacoustics analysis of a side mirror. In: APG Acoustic Symposium, 2019-09-18 - 2019-09-18.
Bonser, Sam and Hughes, Ben Richard and Calautit, John Kaiser (2019) Investigation of the impact of roof configurations on the wind and thermal environment in football stadiums in hot climates. International Journal of Ventilation. pp. 1-20. ISSN 2044-4044
Ilioudis, Christos V. and Cao, Jianlin and Theodorou, Ilias and Striano, Pasquale and Coventry, William and Clemente, Carmine and Soraghan, John (2019) GNSS based passive radar for UAV monitoring. In: IEEE Radar Conference 2019, 2019-04-22 - 2019-04-26, Westin Waterfront Hotel.
Su, Wei and Wang, Peng and Zhang, Yonghao (2019) High-order hybridisable discontinuous Galerkin method for the gas kinetic equation. International Journal of Computational Fluid Dynamics. ISSN 1029-0257
Theodorou, Ilias and Ilioudis, Christos V. and Clemente, Carmine and Vasile, Massimiliano; (2019) SISAR imaging - radio holography signal reconstruction based on receiver-transmitter motion. In: 2019 IEEE Radar Conference (RadarConf). IEEE, USA. ISBN 9781728116792
Punzo, Giuliano and MacLeod, Charles and Baumanis, Kristaps and Summan, Rahul and Dobie, Gordon and Pierce, Stephen and Macdonald, Malcolm (2019) Bipartite guidance, navigation and control architecture for autonomous aerial inspections under safety constraints. Journal of Intelligent and Robotic Systems, 95. 1049–1061. ISSN 0921-0296
Black, Scott and Ritos, Konstantinos and Maclean, Craig and Brodie, Robbie and Kazakidi, Asimina (2019) Perfusion optimisation for vascular grafts design used in the treatment of aortic disease. In: Terumo Aortic Academic Collaborations Conference, 2019-09-12 - 2019-09-12, University of Strathclyde.
Filippi, Gianluca and Vasile, Massimiliano (2019) A multi layer evidence network model for the design process of SpaceSystems under epistemic uncertainty. In: EUROGEN 2019, 2019-09-12 - 2019-09-14.
Pender, Kyle and Yang, Liu (2019) Investigation of catalyzed thermal recycling for glass fiber-reinforced epoxy using fluidized bed process. Polymer Composites, 40 (9). pp. 3510-3519. ISSN 0272-8397
Vrachimi, Ioanna and Cóstola, Daniel (2019) Predicting wind-driven rain catch ratios in building simulation using machine learning techniques. In: Building Simulation 2019, 2019-09-02 - 2019-09-04.
Alcérreca-Huerta, Juan C. and Callejas-Jiménez, Mariana E. and Ordonez-Sanchez, Stephanie and Gallegos, Gabriel and Allmark, Matthew J. and Johnstone, Cameron M. and Marino-Tapia, Ismael and O’Doherty, Tim and Silva, Rodolfo and Carrillo, Laura (2019) Resource assessment of the marine current developed in the Cozumel Channel. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.
Allmark, Matthew and Ordonez-Sanchez, Stephanie and Wang, Sujin and Kang, Yo Seop and Jo, Chul-Hee and O'Doherty, Tim and Johnstone, Cameron (2019) An investigation into Reynolds scaling and solidity for a HATT tidal turbine. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.
Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben Richard (2019) A review of artificial neural network models for ambient air pollution prediction. Environmental Modelling and Software, 119. pp. 285-304. ISSN 1364-8152
Gaurier, B. and Ordonez-Sanchez, S. and Facq, J.-V. and Germain, G. and Johnstone, C. and Martinez, R. and Santic, I. and Salvatore, F. (2019) First round of MaRINET 2 Tidal Energy Round Robin Tests : combined wave and current tests. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.
Capobianchi, Paolo and T. Pinho, Fernando and Lappa, Marcello and Oliveira, Mónica S. N. (2019) Thermocapillary motion of a Newtonian drop in a dilute viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 270. pp. 8-22. ISSN 0377-0257
McGrath, Ciara N. and Macdonald, Malcolm (2019) General perturbation method for satellite constellation reconfiguration using low-thrust maneuvers. Journal of Guidance, Control and Dynamics, 42 (8). pp. 1676-1692. ISSN 1533-3884
Serra, Romain and Hoshi, Kento and Vasile, Massimiliano and Yamakwa, Hiroshi (2019) Study of the Lorentz force on debris with high area-to-mass ratios. Journal of Guidance, Control and Dynamics, 41 (8). pp. 1675-1686. ISSN 1533-3884
Vasile, Massimiliano and Ortega Absil, Carlos and Riccardi, Annalisa (2019) Set propagation in dynamical systems with generalised polynomial algebra and its computational complexity. Communications in Nonlinear Science and Numerical Simulation, 75. pp. 22-49. ISSN 1007-5704
Drikakis, Dimitris and Frank, Michael and Tabor, Gavin (2019) Multiscale computational fluid dynamics. Energies, 12 (17). 3272. ISSN 1996-1073
Abou Neel, Ensanya A. and Kiani, Azadeh and Valappil, Sabeel P. and Mordan, Nicky M. and Baek, Song-Yi and Zakir Hossain, Kazi M. and Felfel, Reda M. and Ahmed, Ifty and Divakarl, Kamini and Chrzanowski, Wojciech and Knowles, Jonathan C. (2019) Glass microparticle- versus microsphere-filled experimental dental adhesives. Journal of Applied Polymer Science, 136 (32). 47832. ISSN 0021-8995
Yang, Weiqi and Gu, Xiao-Jun and Emerson, David R. and Zhang, Yonghao and Tang, Shuo (2019) Modelling thermally induced non-equilibrium gas flows by coupling kinetic and extended thermodynamic methods. Entropy, 21 (8). 816. ISSN 1099-4300
O'Connor, D and Calautit, J K and Calautit, J K and Calautit, K and Hughes, B R and Pantua, C (2019) Analysis of a rotary passive heat recovery device for natural ventilation windcatcher. IOP Conference Series: Materials Science and Engineering, 556. pp. 1-8. 012001. ISSN 1757-899X
Bi, Sifeng and Broggi, Matteo and Wei, Pengfei and Beer, Michael (2019) The Bhattacharyya distance : enriching the P-box in stochastic sensitivity analysis. Mechanical Systems and Signal Processing, 129. pp. 265-281. ISSN 0888-3270
Greco, Cristian and Gentile, Lorenzo and Vasile, Massimiliano and Minisci, Edmondo and Bartz-Beielstein, Thomas (2019) Robust particle filter for space objects tracking under severe uncertainty. In: 2019 AAS/AIAA Astrodynamics Specialist Conference, 2019-08-11 - 2019-08-15.
Macdonald, Hamish and Nash, David and Stack, Margaret M. (2019) Repeated impact of simulated hail ice on glass fibre composite materials. Wear, 432-433. 102926. ISSN 0043-1648
Lyden, Andrew and Tuohy, Paul (2019) A methodology for designing decentralised energy systems with predictive control for heat pumps and thermal storage. E3S Web of Conferences, 111. 06014. ISSN 2555-0403
Gu, Qingqing and Zhu, Lianhua and Zhang, Yonghao and Liu, Haihu (2019) Pore-scale study of counter-current imbibition in strongly water-wet fractured porous media using lattice Boltzmann method. Physics of Fluids, 31 (8). 086602. ISSN 1070-6631
Obande, Winifred and Mamalis, Dimitrios and Ray, Dipa and Yang, Liu and Ó Brádaigh, Conchúr M. (2019) Mechanical and thermomechanical characterisation of vacuum-infused thermoplastic- and thermoset-based composites. Materials and Design, 175. 107828. ISSN 0264-1275
Wang, Peng and Zhang, Yonghao (2019) A high order off-lattice kinetic method for high speed flows with a moderate Knudsen number. AIP Conference Proceedings, 2132 (1). 130013. ISSN 1551-7616
Yang, Weiqi and Gu, Xiao Jun and Emerson, David and Zhang, Yonghao and Tang, Shuo (2019) Comparative study of the discrete velocity and the moment method for rarefied gas flows. AIP Conference Proceedings, 2132. 120006. ISSN 1551-7616
Ho, Minh-Tuan and Zhu, Lianhua and Wu, Lei and Wang, Peng and Guo, Zhaoli and Ma, Jingsheng and Zhang, Yonghao (2019) Pore-scale simulations of rarefied gas flows in ultra-tight porous media. Fuel, 249. pp. 341-351. ISSN 0016-2361
Ricciardi, Lorenzo A. and Vasile, Massimiliano; (2019) Improved archiving and search strategies for multi agent collaborative search. In: Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences. Computational Methods in Applied Sciences . Springer, Cham, Switzerland, pp. 435-455. ISBN 9783319899862
Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) Evaluation of the effect of various prior creep-fatigue interaction damages on subsequent tensile and creep properties of 9%Cr steel. International Journal of Fatigue, 125. pp. 440-453. ISSN 0142-1123
Zhang, Ya and Pan, Guang and Zhang, Yonghao and Haeri, Sina (2019) A multi-physics peridynamics-DEM-IB-CLBM framework for the prediction of erosive impact of solid particles in viscous fluids. Computer Methods in Applied Mechanics and Engineering, 352. pp. 675-690. ISSN 0045-7825
Zhu, Xuanchen and Chen, Haofeng and Xuan, Fuzhen and Chen, Xiaohui (2019) On the creep fatigue and creep rupture behaviours of 9-12% Cr steam turbine rotor. European Journal of Mechanics - A/Solids, 76. pp. 263-278. ISSN 0997-7538
Lithgow, Drew and Morrison, Cara and Pexton, George and Panarotto, Massimo and Jakob, Müller and Almefelt, Lars and McLaren, Andrew (2019) Design automation for customised and large-scale additive manufacturing : a case study on custom kayaks. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1). pp. 699-708. ISSN 2220-4342
Bonetti, Valentina; Stanek, Wojciech and Gladysz, Pawel and Werle, Sebastian and Adamczyk, Wojciech, eds. (2019) Developing building exergy methods through collaboration in the open-data era. In: Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Silesian University of Technology, Wroclaw, p. 251. ISBN 978-83-61506-51-5
Thomason, J and Rudeiros-Fernández, J (2019) Evaluation of injection molded natural fiber-polypropylenes for potential in automotive applications. In: 11th Canadian – International Conference on Composites 2019, 2019-07-22 - 2019-07-25.
McGrath, Ciara N. and Clark, Ruaridh A. and Macdonald, Malcolm (2019) Analysis of responsive satellite manoeuvres using graph theoretical techniques. In: International workshop on satellite constellations and formation flying, 2019-07-16 - 2019-07-19, University of Strathclyde.
Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo (2019) Adaptive multi-population inflationary differential evolution. Soft Computing. ISSN 1433-7479
Ewe, Win Eng and Fudholi, Ahmad and Sopian, Kamaruzzaman and Asim, Nilofar (2019) Evaluation of solar air collector-thermoelectric hybrid system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 142-147. ISSN 2289-7879
García, David and Tcherniak, Dmitri (2019) An experimental study on the data-driven structural health monitoring of large wind turbine blades using a single accelerometer and actuator. Mechanical Systems and Signal Processing, 127. pp. 102-119. ISSN 0888-3270
Ricciardi, Lorenzo A. and Vasile, Massimiliano; López-Ibáñez, Manuel, ed. (2019) Solving multi-objective dynamic travelling salesman problems by relaxation. In: GECCO '19 Proceedings of the Genetic and Evolutionary Computation Conference Companion. ACM, CZE, pp. 1999-2007. ISBN 9781450367486
Lappa, Marcello (2019) On the formation and morphology of coherent particulate structures in non-isothermal enclosures subjected to rotating g-jitters. Physics of Fluids, 31 (7). 073303. ISSN 1070-6631
Ewe, W. E. and Fudholi, A. and Yen, C. H. and Asim, N. and Sopian, K. (2019) Performance of solar air collector-thermoelectric hybrid system. IOP Conference Series: Earth and Environmental Science, 268 (1). pp. 1-5. 012071. ISSN 1755-1315
Falchi, Alessandro and Gentile, Lorenzo and Minisci, Edmondo and Tirelli, Matteo and Perugini, Pierluigi (2019) Launcher vehicle aerothermodynamics and fairing separation altitude effects on payload temperature. In: 8th European Conference for Aeronautics and Space Sciences (EUCASS), 2019-07-01 - 2019-07-04.
Thomason, James and Rudeiros-Fernández, José Luis (2019) Evaluation of injection moulded natural fibre-polyolefin for potential in automotive applications. In: 4th International Conference on Natural Fibers, 2019-07-01 - 2019-07-03.
Wei, Pengfei and Song, Jingwen and Bi, Sifeng and Broggi, Matteo and Beer, Michael and Lu, Zhenzhou and Yue, Zhufeng (2019) Non-intrusive stochastic analysis with parameterized imprecise probability models : II. Reliability and rare events analysis. Mechanical Systems and Signal Processing, 126. pp. 227-247. ISSN 0888-3270
Baker, T. N. and Rahimi, S. and Wei, B. and He, K. and McPherson, N. A. (2019) Evolution of microstructure during double-sided friction stir welding of microalloyed steel. Metallurgical and Materials Transactions A, 50 (6). 2748–2764. ISSN 1073-5623
Garcia, Cristobal and Trendafilova, Irina (2019) Triboelectric sensor as a dual system for impact monitoring and prediction of the damage in composite structures. Nano Energy, 60. pp. 527-535. ISSN 2211-2855
Meco, Sonia and Ganguly, Supriyo and Williams, Stewart and McPherson, Norman (2019) Design of laser welding applied to T joints between steel and aluminium. Journal of Materials Processing Technology, 268. pp. 132-139. ISSN 0924-0136
Rev, Tamas and Jalalvand, Meisam and Fuller, Jonathan and Wisnom, Michael R. and Czél, Gergely (2019) A simple and robust approach for visual overload indication - UD thin-ply hybrid composite sensors. Composites Part A: Applied Science and Manufacturing, 121. pp. 376-385. ISSN 1359-835X
Talebi, Behrang and Haghigat, Fariborz and Tuohy, Paul and Mirzaei, Parham A. (2019) Optimization of a hybrid community district heating system integrated with thermal energy storage system. Journal of Energy Storage, 23. pp. 128-137. ISSN 2352-152X
Thomason, James L. and Nagel, Ulf and Yang, Liu and Bryce, David (2019) A study of the thermal degradation of glass fibre sizings at composite processing temperatures. Composites Part A: Applied Science and Manufacturing, 121. pp. 56-63. ISSN 1359-835X
Marchetti, Francesco and Minisci, Edmondo and Riccardi, Annalisa (2019) Trajectory optimization of a reusable launch vehicle. In: 17th Workshop on Advances in Continuous Optimization, 2019-06-28 - 2019-06-29, University of Strathclyde.
Encarnacion, Job Immanuel and Johnstone, Cameron and Ordonez-Sanchez, Stephanie (2019) Design of a horizontal axis tidal turbine for less energetic current velocity profiles. Journal of Marine Science and Engineering, 7 (7). 197. ISSN 2077-1312
Berquand, Audrey and Murdaca, Francesco and Riccardi, Annalisa and Soares, Tiago and Gerené, Sam and Brauer, Norbert and Kumar, Kartik; (2019) Artificial intelligence for the early design phases of space missions. In: 2019 IEEE Aerospace Conference. IEEE, USA. ISBN 978-1-5386-6854-2
Connolly, S. and MacKenzie, D. and Gorash, Y.; Huneau, Bertrand and Le Cam, Jean-Benoît and Marco, Yann and Verron, Erwan, eds. (2019) The implications of constitutive model selection in hyperelastic parameter identification. In: Constitutive Models for Rubber XI. CRC Press, FRA. ISBN 9780429324710
Giugliano, Dario and Cho, Nak-Kyun and Chen, Haofeng and Gentile, Lorenzo (2019) Cyclic plasticity and creep-cyclic plasticity behaviours of the SiC/Ti-6242 particulate reinforced titanium matrix composites under thermo-mechanical loadings. Composite Structures, 218. pp. 204-216. ISSN 0263-8223
Filippi, Gianluca and Vasile, Massimiliano (2019) A memetic approach to the solution of constrained min-max problems. In: 2019 IEEE Congress on Evolutionary Computation, 2019-06-10 - 2019-06-13.
Greco, Cristian and Gentile, Lorenzo and Filippi, Gianluca and Minisci, Edmondo and Vasile, Massimiliano and Bartz-Beielstein, Thomas; (2019) Autonomous generation of observation schedules for tracking satellites with structured-chromosome GA optimisation. In: 2019 IEEE Congress on Evolutionary Computation. IEEE, NZL, pp. 497-505. ISBN 9781728121536
McKittrick, Craig M. and McKee, Sean and Kennedy, Simon and Oldroyd, Keith and Wheel, Marcus and Pontrelli, Giuseppe and Dixon, Simon and McGinty, Sean and McCormick, Christopher (2019) Combining mathematical modelling with in vitro experiments to predict in vivo drug-eluting stent performance. Journal of Controlled Release, 303. pp. 151-161. ISSN 0168-3659
Ricciu, Roberto and Besalduch, Antonio Luigi and Minisci, Edmondo and Manuello Bertetto, Andrea (2019) Uncertainty based optimal planning of residential building stocks retrofits. International Journal of Mechanics and Control, 20 (1). ISSN 1590-8844 (In Press)
Ahmad, Bilal and Galloway, Alexander and Toumpis, Athanasios (2019) Numerical optimisation of laser assisted friction stir welding of structural steel. Science and Technology of Welding and Joining, 24 (6). pp. 548-558. ISSN 1362-1718
Frank, Michael and Kamenicky, Robin and Drikakis, Dimitris and Thomas, Lee and Ledin, Hans and Wood, Terry (2019) Multiphase flow effects in a horizontal oil and gas separator. Energies, 12 (11). 2116. ISSN 1996-1073
Walker, Lewis and Greco, Cristian and Di Carlo, Marilena and Wilson, Andrew and Ricciardi, Lorenzo and Berquand, Audrey and Vasile, Massimiliano (2019) Nanospacecraft exploration of asteroids by collision and flyby reconnaissance. In: Low-Cost Planetary Missions Conference, 2019-06-03 - 2019-06-05.
Garcia, Cristobal and Trendafilova, Irina (2019) Real-time diagnosis of small energy impacts using a triboelectric nanosensor. Sensors and Actuators A: Physical, 291. pp. 196-203. ISSN 0924-4247
Pugh, Kieran and Rasool, Ghulam and Stack, Margaret M. (2019) Raindrop erosion of composite materials : some views on the effect of bending stress on erosion mechanisms. Journal of Bio- and Tribo-Corrosion, 5 (2). 45. ISSN 2198-4220
Wei, Pengfei and Song, Jingwen and Bi, Sifeng and Broggi, Matteo and Beer, Michael and Lu, Zhenzhou and Yue, Zhufeng (2019) Non-intrusive stochastic analysis with parameterized imprecise probability models : I. Performance estimation. Mechanical Systems and Signal Processing, 124. pp. 349-368. ISSN 0888-3270
Zekos, I. and Stack, M.M. (2019) A note on a design protocol for deoxygenation of water. Electrochemistry Communications, 103. pp. 12-16. ISSN 1388-2481
Bi, Sifeng and Beer, Michael and Ouisse, Morvan and Foltête, Emmanuel (2019) Identification of system matrices based on experimental modal analysis and its application in structural health monitoring. In: 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019, 2019-05-26 - 2019-05-30.
Johnston, Daniel and Afsar, Mohammed (2019) Use of the Padé Approximant in solution to a model of vortex shedding. In: The 32nd Scottish Fluid Mechanics Meeting, 2019-05-30 - 2019-05-30, University of Dundee, School of Science and Engineering.
Stirrat, Sarah and Afsar, Mohammed (2019) Structure of high frequency Green's function in non-axi-symmetric (chevron-type) transversely sheared mean flows using a Ray tracing solver within the generalized acoustic analogy formulation. In: The 32nd Scottish Fluid Mechanics Meeting, 2019-05-30 - 2019-05-30, University of Dundee, School of Science and Engineering.
Wei, Pengfei and Bi, Sifeng and Zhang, Yi and Beer, Michael (2019) Rare failure event analysis of structures under mixed uncertainties. In: 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019, 2019-05-26 - 2019-05-30.
Afsar, Mohammed Z.; (2019) Improved trailing edge noise prediction using a generalized Rapid-distortion theory approach. In: 25th AIAA/CEAS Aeroacoustics Conference. AIAA, NLD. ISBN 9781624105883
Afsar, Mohammed Z. and Sescu, Adrian and Minisci, Edmondo; (2019) Modeling supersonic heated jet noise at fixed jet Mach number using an asymptotic approach for the acoustic analogy Green’s function and an optimized turbulence model. In: 25th AIAA/CEAS Aeroacoustics Conference. AIAA, NLD. ISBN 9781624105883
Alcérreca-Huerta, Juan Carlos and Encarnacion, Job Immanuel and Ordoñez-Sánchez, Stephanie and Callejas-Jiménez, Mariana and Gallegos Diez Barroso, Gabriel and Allmark, Matthew and Mariño-Tapia, Ismael and Silva Casarín, Rodolfo and O'Doherty, Tim and Johnstone, Cameron and Carrillo, Laura (2019) Energy yield assessment from ocean currents in the insular shelf of Cozumel Island. Journal of Marine Science and Engineering, 7 (5). 147. ISSN 2077-1312
Fossati, M. and Mogavero, A. and Herrera-Montojo, J. and Scoggins, J.B. and Magin, T. (2019) A kinetic BGK edge-based scheme including vibrational and electronic energy modes for high-Mach flows. Computers and Fluids, 185. pp. 1-12. ISSN 0045-7930
Lee, Chul-sung and Hoes, P. and Cóstola, D. and Hensen, J.L.M. (2019) Assessing the performance potential of climate adaptive greenhouse shells. Energy, 175. pp. 534-545. ISSN 1873-6785
Ma, Zhiyuan and Wang, Xiaoxiao and Chen, Haofeng and Xuan, Fuzhen; (2019) Creep fatigue life assessment of hydrogenation reactor manufactured of 2.25Cr-1Mo steel using the linear matching method framework. In: ESIA15 & ISSI-2019 Joint Conference on Engineering Structural Integrity Assessment. FESI publishing, Preston, UK.
Rasool, Ghulam and Stack, Margaret M. (2019) Some views on the mapping of erosion of coated composites in tidal turbine simulated conditions. Tribology Transactions, 62 (3). pp. 512-523. ISSN 1040-2004
Fotouhi, Mohamad and Fuller, Jonathan and Longana, Marco and Jalalvand, Meisam and Wisnom, Michael R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215. pp. 365-376. ISSN 0263-8223
Li, Xiangyu and Qiao, Dong and Macdonald, Malcolm (2019) Energy-saving capture at Mars via backward stable orbits. Journal of Guidance, Control and Dynamics, 42 (5). ISSN 1533-3884
Peng, Heng and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2019) Shakedown analysis of a torispherical head with a piping nozzle under combined loads by the stress compensation method. International Journal of Pressure Vessels and Piping, 172. pp. 107-118. ISSN 0308-0161
Lappa, Marcello (2019) Time reversibility and non deterministic behaviour in oscillatorily sheared suspensions of non-interacting particles at high Reynolds numbers. Computers and Fluids, 184. pp. 78-90. ISSN 0045-7930
Mawson, Victoria Jayne and Hughes, Ben Richard (2019) The development of modelling tools to improve energy efficiency in manufacturing processes and systems. Journal of Manufacturing Systems, 51. pp. 95-105. ISSN 0278-6125
Li, Hongjun and Qin, Wei and Galloway, Alexander and Toumpis, Athanasios (2019) Friction surfacing of aluminium alloy 5083 on DH36 steel plate. Metals, 9 (4). 479. ISSN 2075-4701
Ordonez-Sanchez, S. and Ellis, R. and Porter, K. E. and Allmark, M. and O'Doherty, T. and Mason-Jones, A. and Johnstone, C. (2019) Numerical models to predict the performance of tidal stream turbines working under off-design conditions. Ocean Engineering. ISSN 0029-8018
CHO, Nak-Kyun and Chen, Haofeng and MacKenzie, Donald and Giugliano, Dario (2019) Investigating the effects of cyclic thermo-mechanical loading on cyclic plastic behaviour of a ninety-degree back-to-back pipe bend system. Journal of Pressure Vessel Technology. ISSN 0094-9930
Hoste, J.J.O.E. and Fossati, M. and Taylor, I.J. and Gollan, R.J. (2019) Characterisation of the eddy dissipation model for the analysis of hydrogen-fuelled scramjets. Aeronautical Journal, 123 (1262). pp. 536-565. ISSN 0001-9240
Jenkins, Peter G. and Yang, Liu and Thomason, James L. (2019) Investigation of atmospheric moisture during heat treatment of glass fibres. Fibers, 7 (4). 27. ISSN 2079-6439
Sescu, Adrian and Al-aziz, Radwa and Afsar, Mohammed (2019) Effect of wall transpiration and heat transfer on Görtler vortices in high-speed flows. AIAA Journal, 57 (3). pp. 1159-1171. ISSN 0001-1452
Wang, Peng and Su, Wei and Zhu, Lianhua and Zhang, Yonghao (2019) Heat and mass transfer of oscillatory lid-driven cavity flow in the continuum, transition and free molecular flow regimes. International Journal of Heat and Mass Transfer, 131. pp. 291-300. ISSN 0017-9310
Lappa, Marcello; Lind, Patrick R., ed. (2019) Convective effects and traveling waves in transparent oxide materials processed with the floating zone technique. In: Recent Studies in Materials Science. Materials Science and Technologies . Nova Science Publishers, Inc., Hauppauge, NY, pp. 97-150. ISBN 9781536152708
Lappa, Marcello and Ferialdi, Hermes; Lind, Patrick R., ed. (2019) Oscillatory and turbulent flows of liquid metals in differentially heated systems with horizontal and non-horizontal walls. In: Recent Studies in Materials Science. Materials Science and Technologies . Nova Science Publishers, Inc., Hauppauge, NY, pp. 151-209. ISBN 9781536152708
Ritos, K. and Drikakis, D. and Kokkinakis, I. W. (2019) Wall-pressure spectra models for supersonic and hypersonic turbulent boundary layers. Journal of Sound and Vibration, 443. pp. 90-108. ISSN 0022-460X
Cóstola, D. and Carreira, G. and Labaki, L.O. and Fernandes, L. (2019) Seasonal Thermal Sensation Vote - An indicator for long-term energy performance of dwellings with no HVAC systems. Energy and Buildings, 187. pp. 64-76. ISSN 0378-7788
Ho, Minh Tuan and Li, Jun and Wu, Lei and Reese, Jason M. and Zhang, Yonghao (2019) A comparative study of the DSBGK and DVM methods for low-speed rarefied gas flows. Computers and Fluids, 181. pp. 143-159. ISSN 0045-7930
Hassanati, Bahman and Wheel, Marcus (2019) Quantifying numerically forecast size effects in the free vibration of heterogeneous beams. International Journal of Mechanical Sciences, 152. pp. 298-311. ISSN 0020-7403
Calautit, John and O'Connor, Dominic and Shahzad, Sally and Calautit, Katrina and Hughes, Ben (2019) Numerical and experimental analysis of a natural ventilation windcatcher with passive heat recovery for mild-cold climates. Energy Procedia, 158. pp. 3125-3130. ISSN 1876-6102
Garcia, Cristobal and Trendafilova, Irina and Sanchez de Rio, Jose (2019) Detection and measurement of impacts in composite structures using a self-powered triboelectric sensor. Nano Energy, 56. pp. 443-453. ISSN 2211-2855
Peng, Heng and Liu, Yinghua and Chen, Haofeng (2019) Shakedown analysis of elastic-plastic structures considering the effect of temperature on yield strength : theory, method and applications. European Journal of Mechanics - A/Solids, 73. pp. 318-330. ISSN 0997-7538
Persico, Adriano Rosario and Kirkland, Paul and Clemente, Carmine and Soraghan, John J. and Vasile, Massimiliano (2019) CubeSat-based passive bistatic radar for space situational awareness : a feasibility study. IEEE Transactions on Aerospace and Electronic Systems, 55 (1). pp. 476-485. 8387455. ISSN 0018-9251
Ricciardi, Lorenzo A. and Vasile, Massimiliano (2019) Direct transcription of optimal control problems with finite elements on Bernstein basis. Journal of Guidance, Control and Dynamics, 42 (2). pp. 229-243. ISSN 1533-3884
Shahzad, Sally and Calautit, John Kaiser and Hughes, Ben Richard and BK, Satish and Rijal, Hom B. (2019) Visual thermal landscaping (VTL) model : a qualitative thermal comfort approach based on the context to balance energy and comfort. Energy Procedia, 158. pp. 3119-3124. ISSN 1876-6102
Zheng, Xiaotao and Chen, Haofeng and Ma, Zhiyuan and Xuan, Fuzhen (2019) A novel fatigue assessment approach by Direct Steady Cycle Analysis (DSCA) considering the temperature-dependent strain hardening effect. International Journal of Pressure Vessels and Piping, 170. pp. 66-72. ISSN 0308-0161
Lappa, Marcello; (2019) Towards new contact-less techniques for the control of inertial particles dispersed in a fluid. In: 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar , India. ICTEA/Ryerson University, IND.
Driggers, J. C. and Hall, E. D. and Hanson, J. and Hough, J. and Liu, J. and Smith, B. and Lockerbie, N. A. and Zhang, L., LIGO Scientific Collaboration (2019) Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO. Physical Review D, 99 (4). 042001. ISSN 1550-2368
Li, Hongjun and Gao, Jian and Li, Qinchuan and Galloway, Alexander and Toumpis, Athanasios (2019) Effect of friction stir welding tool design on welding thermal efficiency. Science and Technology of Welding and Joining, 24 (2). pp. 156-162. ISSN 1362-1718
Ritos, K. and Drikakis, D. and Kokkinakis, I.W. (2019) Acoustic loading beneath hypersonic transitional and turbulent boundary layers. Journal of Sound and Vibration, 441. pp. 50-62. ISSN 0022-460X
Bi, Sifeng and Broggi, Matteo and Beer, Michael (2019) The role of the Bhattacharyya distance in stochastic model updating. Mechanical Systems and Signal Processing, 117. pp. 437-452. ISSN 0888-3270
Rahimi, S. and Konkova, T. N. and Violatos, I. and Baker, T. N. (2019) Evolution of microstructure and crystallographic texture during dissimilar friction stir welding of duplex stainless steel to low carbon-manganese structural steel. Metallurgical and Materials Transactions A, 50 (2). pp. 664-687. ISSN 1073-5623
Haghigat, Fariborz and Tuohy, Paul and Fraisse, Gilles and Del Pero, Claudio (2019) IEA ECES Annex 31 Final Report - Energy Storage with Energy Efficient Buildings and Districts: Optimization and Automation. International Energy Agency, Paris, France.
Di Carlo, Marilena and Vasile, Massimiliano and Greco, Cristian and Epenoy, Richard; Topputo, Francesco and Sinclair, Andrew J. and Wilkins, Matthew P. and Zanetti, Renato, eds. (2019) Robust optimisation of low-thrust interplanetary transfers using evidence theory. In: 29th AAS/AIAA Space Flight Mechanics Meeting. Univelt Inc, USA, pp. 339-358. ISBN 9780877036593
Lappa, M. and Esposito, A. and Aponte, F. and Allouis, C. (2019) High velocity infrared thermography and numerical trajectories of solid particles in compressible gas flow. Powder Technology, 343. pp. 671-682. ISSN 0032-5910
Su, Wei and Wang, Peng and Liu, Haihu and Wu, Lei (2019) Accurate and efficient computation of the Boltzmann equation for Couette flow : influence of intermolecular potentials on Knudsen layer function and viscous slip coefficient. Journal of Computational Physics, 378. pp. 573-590. ISSN 0021-9991
Guo, Su-Juan and Wang, Run-Zi and Chen, Haofeng and Xuan, Fu-Zhen (2019) A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint. International Journal of Mechanical Science, 150. pp. 66-78. ISSN 0020-7403
Ho, Minh Tuan and Zhu, Lianhua and Wu, Lei and Wang, Peng and Guo, Zhaoli and Li, Zhi-Hui and Zhang, Yonghao (2019) A multi-level parallel solver for rarefied gas flows in porous media. Computer Physics Communications, 234. pp. 14-25. ISSN 0010-4655
Peng, Heng and Liu, Yinghua and Chen, Haofeng (2019) A numerical formulation and algorithm for limit and shakedown analysis of large-scale elastoplastic structures. Computational Mechanics, 63 (1). pp. 1-22. ISSN 0178-7675
Zabidi, Adi Z. and Li, Shuguang and Felfel, Reda M. and Thomas, Kathryn G. and Grant, David M. and McNally, Donal and Scotchford, Colin (2019) Computational mechanical characterization of geometrically transformed Schwarz P lattice tissue scaffolds fabricated via two photon polymerization (2PP). Additive Manufacturing, 25. pp. 399-411. ISSN 2214-8604
Ricciardi, Lorenzo A. and Maddock, Christie Alisa and Vasile, Massimiliano (2019) Direct solution of multi-objective optimal control problems applied to spaceplane mission design. Journal of Guidance, Control and Dynamics, 42 (1). pp. 30-46. ISSN 1533-3884
MacKenzie, Alasdair and Stickland, Matthew and Dempster, William; Miguel Nóbrega, J. and Jasak, Hrvoje, eds. (2019) Development of a combined Euler-Euler Euler-Lagrange slurry model. In: OpenFOAM®. Springer, Cham, Switzerland, pp. 77-91. ISBN 978-3-319-60846-4
Ordonez-Sanchez, Stephanie and Allmark, Matthew and Porter, Kate and Ellis, Robert and Lloyd, Catherine and Santic, Ivan and O'Doherty, Tim and Johnstone, Cameron (2019) Analysis of a horizontal-axis tidal turbine performance in the presence of regular and irregular waves using two control strategies. Energies, 12 (3). 367. ISSN 1996-1073
Ricciardi, Lorenzo A. and Vasile, Massimiliano (2019) A relaxation approach for hybrid multi-objective optimal control : application to multiple debris removal missions. In: 29th AAS/AIAA Space Flight Mechanics Meeting, 2019-01-13 - 2019-01-17, Sheraton Maui Resort & Spa.
Felfel, Reda M. and Gideon-Adeniyi, Mark J. and Zakir Hossain, Kazi M. and Roberts, George A.F. and Grant, David M. (2019) Structural, mechanical and swelling characteristics of 3D scaffolds from chitosan-agarose blends. Carbohydrate Polymers, 204. pp. 59-67. ISSN 0144-8617
Jenkins, Peter G and Yang, Liu and Thomason, James L and Chen, Xinyong and Watts, John F and Hinder, Steven J (2019) Investigation of chemical and physical surface changes of thermally conditioned glass fibres. Fibers, 7 (1). 7. ISSN 2079-6439
Yu, Yuan and Liu, Haihu and Liang, Dong and Zhang, Yonghao (2019) A versatile lattice Boltzmann model for immiscible ternary fluid flows. Physics of Fluids, 31 (1). 012108. ISSN 1089-7666
Trendafilova, Irina and Garcia Pariente, Cristobal; Zhu, Jiajun and Liu, Baicuan and Bellet, Daniel, eds. (2019) Self-powered pressure sensor based on triboelectric nanogenerator. In: Advances towards the Development of Nanotechnology. AkademikerVerlag, Saarbrücken, Germany, pp. 337-343. ISBN 978-620-2-22099-6
Kokkinakis, Ioannis W. and Drikakis, Dimitris and Youngs, David L. (2019) Modeling of Rayleigh-Taylor mixing using single-fluid models. Physical Review E, 99 (1). 013104. ISSN 2470-0053
Zhang, Yue and Zhu, Lianhua and Wang, Peng and Guo, Zhaoli (2019) Discrete unified gas kinetic scheme for flows of binary gas mixture based on the McCormack model. Physics of Fluids, 31 (1). 017101. ISSN 1070-6631
Gutiérrez, Bárbara Arizmendi and Minisci, Edmondo and Chisholm, Greig; Andrés-Pérez, E. and González, L. and Periaux, J. and Gauger, N. and Quagliarella, D. and Giannakoglou, K., eds. (2019) CFD based design optimization of a cabinet nitrogen generator. In: Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems. Computational Methods in Applied Sciences . Springer, Cham, Switzerland, pp. 247-260. ISBN 978-3-319-89889-6
Su, Wei and Wang, Peng and Zhang, Yonghao and Wu, Lei (2019) A high-order hybridizable discontinuous Galerkin method with fast convergence to steady-state solutions of the gas kinetic equation. Journal of Computational Physics, 376. pp. 973-991. ISSN 0021-9991
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N.; Nóbrega, João and Jasak, Hrvoje, eds. (2019) Implementation of a flexible and modular multiphase framework for the analysis of surface-tension driven flows based on a L-S VOF approach. In: OpenFOAM®. Springer, PRT, pp. 235-247. ISBN 978-3-319-60846-4
2018
Abid, Muhammad and Nash, David Hugh and Javed, Saif and Wajid, Hafiz Abdul (2018) Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading – FEA study. International Journal of Pressure Vessels and Piping, 168. pp. 166-173. ISSN 0308-0161
Germanou, Lefki and Ho, Minh Tuan and Zhang, Yonghao and Wu, Lei (2018) Intrinsic and apparent gas permeability of heterogeneous and anisotropic ultra-tight porous media. Journal of Natural Gas Science and Engineering, 60. pp. 271-283. ISSN 1875-5100
Li, Jun and Ho, Minh Tuan and Wu, Lei and Zhang, Yonghao (2018) On the unintentional rarefaction effect in LBM modeling of intrinsic permeability. Advances in Geo-Energy Research, 2 (4). pp. 404-409. ISSN 2208-598X
Soleimani, Zohreh and Kaiser Calautit, John and Calautit, Katrina and Richard Hughes, Ben (2018) Climatic analysis of ventilation and thermal performance of a dome building with roof vent. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 171 (8). pp. 411-424. ISSN 1478-4629
Zografos, Konstantinos and Burshtein, Noa and Shen, Amy Q. and Haward, Simon J. and Poole, Robert J. (2018) Elastic modifications of an inertial instability in a 3D cross-slot. Journal of Non-Newtonian Fluid Mechanics, 262. pp. 12-24. ISSN 0377-0257
Felfel, Reda M. and Gupta, Dhanak and Zabidi, Adi Z. and Prosser, Amy and Scotchford, Colin A. and Sottile, Virginie and Grant, David M. (2018) Performance of multiphase scaffolds for bone repair based on two-photon polymerized poly(D,L-lactide-co-ɛ-caprolactone), recombinamers hydrogel and nano-HA. Materials and Design, 160. pp. 455-467. ISSN 0264-1275
Puliyaneth, Manu and Barbera, Daniele and Chen, Haofeng and Xuan, Fuzhen (2018) Study of ratchet limit and cyclic response of welded pipe. International Journal of Pressure Vessels and Piping, 168. pp. 49-58. ISSN 0308-0161
Shorthouse, David and Riedel, Angela and Kerr, Emma and Pedro, Luisa and Bihary, Dóra and Samarajiwa, Shamith and Martins, Carla P. and Shields, Jacqueline and Hall, Benjamin A. (2018) Exploring the role of stromal osmoregulation in cancer and disease using executable modelling. Nature Communications, 9 (1). 3011. ISSN 2041-1723
Allison, J. and Cowie, A. and Flett, G. and Hand, J W and Hawker, G and Kelly, N J (2018) Modelling responsive demand from electrified domestic heating and storage under different operating strategies. In: uSIM - Urban Energy Simulation, 2018-11-30 - 2018-11-30, University of Strathclyde.
Maddock, Christie Alisa and Ricciardi, Lorenzo and West, Michael and West, Joanne and Kontis, Konstantinos and Rengarajan, Sriram and Evans, David and Milne, Andy and McIntyre, Stuart (2018) Conceptual design analysis for a two-stage-to-orbit semi-reusable launch system for small satellites. Acta Astronautica, 152. pp. 782-792. ISSN 0094-5765
Okorokov, V. and MacKenzie, D. and Gorash, Y. and Morgantini, M. and van Rijswick, R. and Comlekci, T. (2018) High cycle fatigue analysis in the presence of autofrettage compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2305-2320. ISSN 8756-758X
Payne, Grégory S. and Stallard, Tim and Martinez Mejia, Rodrigo Andres and Bruce, Tom (2018) Variation of loads on a three-bladed horizontal axis tidal turbine with frequency and blade position. Journal of Fluids and Structures, 83. pp. 156-170. ISSN 0889-9746
Minty, Ross F. and Thomason, James L. and Yang, Liu and Stanley, Walter and Roy, Ananda (2018) Development and application of novel technique for characterising the cure shrinkage of epoxy resins. Polymer Testing, 73. 316 - 326. ISSN 0142-9418
Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z and Buxton, Oliver (2018) Simulating and investigating compressible flows interaction with fractal structures. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 2018-11-18 - 2018-11-21, Georgia World Congress Center.
Sescu, Adrian and El-Amrani, Safae and Afsar, Mohammed Z (2018) Effect of wall temperature on the growth of Gortler vortices in high-speed boundary layers. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 2018-11-18 - 2018-11-21, Georgia World Congress Center.
Ricciardi, Lorenzo Angelo and Vasile, Massimiliano (2018) MODHOC - Multi Objective Direct Hybrid Optimal Control. In: 7th International Conference on Astrodynamics Tools and Techniques, 2018-11-06 - 2018-11-09.
Sescu, Adrian and Afsar, Mohammed (2018) Optimal control of Gӧrtler vortices in a high-Reynolds number asymptotics framework. In: Fifteenth International Conference on Flow Dynamics, 2018-11-07 - 2018-11-09, Aobayama.
Uzzaman, Asraf and Lim, James B. P. and Nash, David and Yousefi, Amir M. and Young, Ben; (2018) Experimental and analytical studies of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018. Missouri University of Science and Technology, USA, pp. 163-178.
Uzzaman, Asraf and Lim, James B. P. and Nash, David and Yousefi, Amir M. and Young, Ben; (2018) Parametric studies and design recommendations of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018. Missouri University of Science and Technology, USA, pp. 179-189.
Abdalla, Fatin and Tuohy, Paul and Evans, Dorothy and Blackwell, Paul (2018) A review of integrated phase change materials for evacuated tube solar collector system. In: International Conference on Energy Research, 2018-10-31 - 2018-11-02.
Saeedifar, Milad and Najafabadi, Mehdi Ahmadi and Zarouchas, Dimitrios and Toudeshky, Hossein Hosseini and Jalalvand, Meisam (2018) Barely visible impact damage assessment in laminated composites using acoustic emission. Composites Part B: Engineering, 152. pp. 180-192. ISSN 1359-8368
Zheng, X.T. and Dai, W.C. and Chen, H.F. and Shen, J. (2018) Ratcheting effect of reinforced graphite sheet with stainless steel insert (RGSWSSI) under cyclic compression at elevated temperature. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2391-2401. ISSN 8756-758X
Clark, Ruaridh and Macdonald, Malcolm (2018) Eigenvector-based community detection for identifying information hubs in neuronal networks. Preprint / Working Paper. bioRxiv, New York.
Wolszczak, P. and Garcia, C. (2018) Assessment of the distribution of nanofibers in membranes based on microstructure photos. IOP Conference Series: Materials Science and Engineering, 416 (1). 012048. ISSN 1757-899X
Giugliano, Dario and Barbera, Daniele and Chen, Haofeng and Cho, Nak-Kyun and Liu, Yinghua (2018) Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538
Cho, Nak-Kyun and Chen, Haofeng; (2018) Cyclic plasticity behavior of 90° back-to-back pipe bends under cyclic bending and steady pressure. In: 2018 26th International Conference on Nuclear Engineering. ASME, GBR. ISBN 978-0-7918-5153-1
Lappa, Marcello and Ferialdi, Hermes (2018) Multiple solutions, oscillons and strange attractors in thermoviscoelastic marangoni convection. Physics of Fluids, 30 (10). 104104. ISSN 1070-6631
Wang, Peng and Su, Wei and Zhang, Yonghao (2018) Oscillatory rarefied gas flow inside a three dimensional rectangular cavity. Physics of Fluids, 30. 102002. ISSN 1070-6631
Logan, Alasdair and Garcia Cava, David and Liskiewicz, Grzegorz (2018) Detection of inlet recirculation as an early indicator of proximity to instability in centrifugal compressors. In: 13th International Symposium On Compressor & Turbine Flow Systems - Theory & Application Areas, 2018-10-18 - 2018-10-20.
Leib, Stewart and Goldstein, Marvin and Afsar, Mohammed (2018) Application of rapid distortion theory to the prediction of integrated propulsion system noise. In: Acoustics and Urban Air Mobility Technical Working Group Meetings, 2018-10-16 - 2018-10-17, NASA Glenn Research Center.
Drikakis, Dimitris and Fossati, Marco and Kazakidi, Asimina and Emerson, David R. (2018) Preface to the special issue on : "29th international conference on parallel computational fluid dynamics". Computers and Fluids, 175. p. 1. ISSN 0045-7930
Oluleye, Gbemi and Allison, John and Hawker, Graeme and Kelly, Nick and Hawkes, Adam D. (2018) A two-step optimization model for quantifying the flexibility potential of power-to-heat systems in dwellings. Applied Energy, 228. pp. 215-228. ISSN 0306-2619
Garcia, Cristobal and Trendafilova, Irina (2018) A self-powered triboelectric velocity sensor for impact detection in composite structures. MATEC Web of Conferences, 211. 21004. ISSN 2261-236X
Filippi, Gianluca and Krpelik, Daniel and Korondi, Peter Zeno and Vasile, Massimiliano and Marchi, Mariapia and Poloni, Carlo (2018) Space systems resilience engineering and global system reliability optimisation under imprecision and epistemic uncertainty. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.
Greco, Cristian and Di Carlo, Marilena and Vasile, Massimiliano and Epenoy, Richard (2018) An intrusive polynomial algebra multiple shooting approach to the solution of optimal control problems. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.
Filippi, Gianluca and Marchi, Mariapia and Vasile, Massimiliano and Vercesi, Paolo; (2018) Evidence-based robust optimisation of space systems with evidence network models. In: 2018 IEEE Congress on Evolutionary Computation. IEEE, BRA. ISBN 9781509060177
Berquand, Audrey and Murdaca, Francesco and Riccardi, Annalisa and Soares, Tiago and Gerené, Sam and Brauer, Norbert and Kumar, Kartik (2018) Towards an artificial intelligence based design engineering assistant for the early design of space missions. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.
Touliatou, Dimitra and Wheel, Marcus A. (2018) K-dominance and size effect in mode I fracture of brittle materials with low to medium porosity. Engineering Fracture Mechanics, 201. pp. 269-281. ISSN 0013-7944
Minty, Ross F. and Yang, Liu and Thomason, James L. (2018) The influence of hardener-to-epoxy ratio on the interfacial strength in glass fibre reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing, 112. 64 - 70. ISSN 1359-835X
Filippi, Gianluca and Vasile, M. and Korondi, P. Z. and Marchi, M. and Poloni, C. (2018) Robust design optimisation of dynamical space systems. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.
Lappa, Marcello and Ferialdi, Hermes (2018) Gravitational thermal flows of liquid metals in 3D variable cross-section containers : transition from low-dimensional to high-dimensional chaos. Chaos, 28 (9). 093114. ISSN 1054-1500
Thomason, James L. and Rudeiros Fernandez, José Luis (2018) A review of the impact performance of natural fiber thermoplastic composites. Frontiers in Materials, 5. 60. ISSN 2296-8016
Wilson, Andrew Ross and Vasile, Massimiliano and Maddock, Christie and Baker, Keith J. (2018) The Strathclyde space systems database : a new life cycle sustainability assessment tool for the design of next generation green space systems. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.
Murdaca, F. and Berquand, A. and Kumar, K. and Riccardi, A. and Soares, T. and Gerené, S. and Brauer, N. (2018) Knowledge-based information extraction from datasheets of space parts. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.
Murdaca, F. and Berquand, A. and Riccardi, A. and Soares, T. and Gerené, S. and Brauer, N. and Kumar, K. (2018) Artificial intelligence for early design of space missions in support of concurrent engineering sessions. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.
Zhang, Shuai and Minisci, Edmondo and Liu, Mingyong and Huang, Yunke and Riccardi, A (2018) Improved collaborative optimization in multidisciplinary design optimization problems. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.
Garcia, D. and Tcherniak, D. and Branner, K. (2018) Virtual prototyping of an actuator-based structural health monitoring system of wind turbine blades. In: 28th International Conference on Noise and Vibration Engineering, ISMA 2018, Including the 5th International Conference on Uncertainty in Structural Dynamics, USD 2018, 2018-09-17 - 2018-09-19.
Alobaid, Mohammad and Hughes, Ben and Heyes, Andrew and O'Connor, Dominic (2018) Determining the effect of inlet flow conditions on the thermal efficiency of a flat plate solar collector. Fluids, 3 (3). 67.
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N. (2018) Deformation of a ferrofluid droplet in a simple shear flow under the effect of a constant magnetic field. Computers and Fluids, 173. pp. 313-323. ISSN 0045-7930
Karouni, Faris and Wynne, Bradley P and Talamantes-Silva, Jesus and Phillips, Stephen (2018) A parametric study on the effects of process conditions on dehydrogenation, wall shear and slag entrainment in the vacuum arc degasser using mathematical modelling. ISIJ International, 58 (9). pp. 1679-1686. ISSN 0915-1559
Martinez Mejia, Rodrigo Andres and Payne, Grégory S. and Bruce, Tom (2018) The effects of oblique waves and currents on the loadings and performance of tidal turbines. Ocean Engineering, 164. pp. 55-64. ISSN 0029-8018
Ritos, Konstantinos and Kokkinakis, Ioannis W. and Drikakis, Dimitris (2018) Performance of high-order implicit large eddy simulations. Computers and Fluids, 173. pp. 307-312. ISSN 0045-7930
Allmark, Matthew and Ellis, Robert and Johannesen, Kate and O'Doherty, Tim and Johnstone, Cameron (2018) The development and testing of a lab-scale tidal stream turbine for the study of dynamic device loading. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.
Ellis, Robert and Allmark, Matthew and O'Doherty, Tim and Mason-Jones, Allan and Ordonez-Sanchez, Stephanie and Johannesen, Kate and Johnstone, Cameron (2018) Design process for a scale horizontal axis tidal turbine blade. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.
Griffiths, Alexander D. and Herrnsdorf, Johannes and Lowe, Christopher and Macdonald, Malcolm and Henderson, Robert and Strain, Michael J. and Dawson, Martin D. (2018) Temporal encoding to reject background signals in a low complexity, photon counting communication link. Materials, 11 (9). 1671. ISSN 1996-1944
Ordonez-Sanchez, Stephanie and Porter, Kate and Allmark, Matthew and Johnstone, Cameron and O'Doherty, Tim (2018) Blade element momentum theory to predict the effect of wave-current interactions on the performance of tidal stream turbines. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.
Porter, Kate and Ordonez-Sanchez, Stephanie and Allmark, Matthew and Ellis, Robert and Lloyd, Catherine and O'Doherty, Tim and Johnstone, Cameron (2018) Laboratory study of tidal turbine performance in irregular waves. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.
Rivera Camacho, Jose Manuel and Johnstone, Cameron M. and Ordonez Sanchez, Stephanie E. (2018) The effect of bathymetry interaction with waves and sea currents on the loading and thrust of a tidal turbine. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.
Roberts, Callum and Isbister, Sophie and Murphy, Cameron and Nisbet, Calvin and Sweeney, Paul and Garcia Cava, David and Tcherniak, Dmitri (2018) Strain estimation using modal expansion approach via virtual sensing for structural asset management. In: 1st International Conference on Structural Integrity for offshore energy industry, 2018-09-06 - 2018-09-07.
Borg, Matthew K. and Lockerby, Duncan A. and Ritos, Konstantinos and Reese, Jason M. (2018) Multiscale simulation of water flow through laboratory-scale nanotube membranes. Journal of Membrane Science. ISSN 0376-7388
Shen, Jun and Chen, Haofeng and Liu, Yinghua (2018) A new four-dimensional ratcheting boundary : derivation and numerical validation. European Journal of Mechanics - A/Solids, 71. pp. 101-112. ISSN 0997-7538
Wang, Zewu and Han, Quanfeng and Nash, David H. and Fan, Haigui and Xia, Liangzhi (2018) Thermal buckling of cylindrical shell with temperature-dependent material properties : conventional theoretical solution and new numerical method. Mechanics Research Communications, 92. pp. 74-80. ISSN 1873-3972
Zhang, Ya and Zhang, Yonghao and Pan, Guang and Haeri, Sina (2018) Numerical study of the particle sedimentation in a viscous fluid using a coupled DEM-IB-CLBM approach. Journal of Computational Physics, 368. pp. 1-20. ISSN 0021-9991
Ahmad, Bilal and Galloway, Alexander and Toumpis, Athanasios (2018) Advanced numerical modelling of friction stir welded low alloy steel. Journal of Manufacturing Processes, 34 (Part A). pp. 625-636. ISSN 1526-6125
Chen, Wanqun and Xie, Wenkun and Huo, Dehong and Yang, Kai (2018) A novel 3D surface generation model for micro milling based on homogeneous matrix transformation and dynamic regenerative effect. International Journal of Mechanical Sciences, 144. pp. 146-157. ISSN 0020-7403
Garcia, Cristobal and Trendafilova, Irina and Guzman de Villoria, Roberto and Sanchez del Rio, Jose (2018) Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis. Nano Energy, 50. pp. 401-409. ISSN 2211-2855
Gu, Qingqing and Liu, Haihu and Zhang, Yonghao (2018) Lattice Boltzmann simulation of immiscible two-phase displacement in two-dimensional Berea sandstone. Applied Sciences, 8 (9). 1497. ISSN 2076-3417
Tucker, Declan and Andreu, Aurik and Elliott, Claire and Ford, Trevor and Neagu, Marius and Machin, Graham and Pearce, Jonathan (2018) Integrated self-validating thermocouples with a reference temperature up to 1329 °C. Measurement Science and Technology, 29 (10). 105002. ISSN 0957-0233
Lappa, Marcello (2018) On the formation and propagation of hydrothermal waves in liquid layers with phase change. Computers and Fluids, 172. pp. 741-760. ISSN 0045-7930
Petersen, H. N. and Minty, R. F. and Thomason, J. L. and Yang, L. and Kusano, Y. and Brønsted, P. and Almdal, K. (2018) The amine:epoxide ratio at the interface of a glass fibre/epoxy matrix system and its influence on the interfacial shear strength. Composite Interfaces. pp. 1-13. ISSN 0927-6440
Felfel, Reda M. and Hossain, Kazi M.Zakir and Kabir, Sumaya F. and Liew, Soon Y. and Ahmed, Ifty and Grant, David M. (2018) Flexible and transparent films produced from cellulose nanowhisker reinforced agarose. Carbohydrate Polymers, 194. pp. 328-338. ISSN 0144-8617
Garwood, Tom Lloyd and Hughes, Ben Richard and O'Connor, Dominic and Calautit, John K. and Oates, Michael R. and Hodgson, Thomas (2018) A framework for producing gbXML building geometry from Point Clouds for accurate and efficient Building Energy Modelling. Applied Energy, 224. pp. 527-537. ISSN 0306-2619
Shahzad, Sally and Calautit, John Kaiser and Calautit, Katrina and Hughes, Ben and Aquino, Angelo I. (2018) Advanced personal comfort system (APCS) for the workplace : a review and case study. Energy and Buildings, 173. pp. 689-709. ISSN 0378-7788
Liu, Wei and Tang, Guihua and Su, Wei and Wu, Lei and Zhang, Yonghao (2018) Rarefaction throttling effect : Influence of the bend in micro-channel gaseous flow. Physics of Fluids, 30 (8). 082002. ISSN 1070-6631
Trendafilova, Irina and Garcia Cava, David and Al-Bugharbee, Hussein; Nobari, Ali Salehzadeh and Aliabadi, M. H. Ferri, eds. (2018) Data-driven methods for vibration-based monitoring based on singular spectrum analysis. In: Vibration-Based Techniques for Damage Detection and Localization in Engineering Structures. Computational and Experimental Methods in Structures . World Scientific, London, pp. 41-73. ISBN 978-1-78634-496-0
Clarke, Joe (2018) The role of building operational emulation in realizing a resilient built environment. Architectural Science Review, 61 (5). pp. 358-361. ISSN 0003-8628
Ojo, A.O. and McCallum, F. and Andreu, A. and Heyes, A.L. (2018) On the use of phosphor thermometry for temperature monitoring in manufacturing processes. In: 1st International Conference on Phosphor Thermometry, 2018-07-25 - 2018-07-27, Strathclyde University.
Garcia, Cristobal and Trendafilova, Irina and Zucchelli, Andrea (2018) The effect of polycaprolactone nanofibers on the dynamic and impact behavior of glass fibre reinforced. Journal of Composites Science, 2 (3). 43. ISSN 2504-477X
Okorokov, Volodymyr and MacKenzie, Donald and Gorash, Yevgen; (2018) Fatigue and corrosion fatigue life assessment with application to autofrettaged parts. In: ASME 2018 Pressure Vessels and Piping Conference. ASME, CZE. ISBN 9780791851661
Pugh, Kieran and Rasool, Ghulam and Stack, Margaret M (2018) Some thoughts on mapping tribological issues of wind turbine blades due to effects of onshore and offshore raindrop erosion. Journal of Bio- and Tribo-Corrosion. pp. 1-8. ISSN 2198-4220
Gorash, Yevgen and Bickley, Alan and Gozalo, Francisco; (2018) Application of the CEL approach to consider FSI for the assessment of leak tightness for elastomeric seals. In: ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers (ASME), CZE. ISBN 9780791851654
Kokkinakis, I. W. and Drikakis, D. and Youngs, D. L. (2018) Four-equation models for Rayleigh-Taylor mixing. In: 16th International Workshop on the Physics of Compressible Turbulent Mixing, 2018-07-15 - 2018-07-20.
Ritos, K. and Drikakis, D. and Kokkinakis, I. W. (2018) Computational aeroacoustics beneath high speed transitional and turbulent boundary layers. In: 10th International Conference on Computational Fluid Dynamics, 2018-07-09 - 2018-07-13.
Muscat, Carl and Riches, Philip and Wheel, Marcus (2018) In silico size effects in cancellous bone. In: 8th World Congress of Biomechanics, 2018-07-08 - 2018-07-12, Convention Centre Dublin.
Polnik, Mateusz Damian and Riccardi, Annalisa (2018) Indexing discrete sets in a label setting algorithm for solving the elementary shortest path problem with resource constraints. In: 2018 IEEE Congress on Evolutionary Computation, 2018-07-08 - 2018-07-13.
Lappa, Marcello; Gelfgat, Alexander, ed. (2018) A mathematical and numerical framework for the simulation of oscillatory buoyancy and Marangoni convection in rectangular cavities with variable cross section. In: Computational Modeling of Bifurcations and Instabilities in Fluid Mechanics. Springer Mathematical Series, 50 . Springer, Cham., pp. 419-458. ISBN 9783319914930
Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110. pp. 29-44. ISSN 1359-835X
Saeedifar, Milad and Najafabadi, Mehdi Ahmadi and Zarouchas, Dimitrios and Toudeshky, Hossein Hosseini and Jalalvand, Meisam (2018) Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using acoustic emission. Composites Part B: Engineering, 144. pp. 206-219. ISSN 1359-8368
Alobaid, Mohammad and Hughes, Ben and O’Connor, Dominic and Calautit, John and Heyes, Andrew (2018) Improving thermal and electrical efficiency in photovoltaic thermal systems for sustainable cooling system integration. Journal of Sustainable Development of Energy, Water and Environment Systems, 6 (2). pp. 305-322. ISSN 1848-9257
Lappa, Marcello and Gradinscak, Tomislav (2018) On the oscillatory modes of compressible thermal convection in inclined differentially heated cavities. International Journal of Heat and Mass Transfer, 121. pp. 412-436. ISSN 0017-9310
López, Alejandro and Stickland, Matthew T. and Dempster, William M. (2018) CFD study of fluid flow changes with erosion. Computer Physics Communications, 227. pp. 27-41. ISSN 0010-4655
Mandova, Hana and Gale, William F. and Williams, Alan and Heyes, Andrew L. and Hodgson, Peter and Miah, Kamal H. (2018) Global assessment of biomass suitability for ironmaking – opportunities for co-location of sustainable biomass, iron and steel production and supportive policies. Sustainable Energy Technologies and Assessments, 27. pp. 23-39. ISSN 2213-1388
Oguz, Elif and Kubicek, Martin and Clelland, David (2018) Failure modes and criticality analysis of the preliminary design phase of the Mars Desert Research Station considering human factors. Reliability Engineering and System Safety. ISSN 0951-8320
Ritos, Konstantinos and Kokkinakis, Ioannis W. and Drikakis, Dimitris (2018) Physical insight into the accuracy of finely-resolved iLES in turbulent boundary layers. Computers and Fluids, 169. pp. 309-316. ISSN 0045-7930
Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L.; (2018) A simple chemical approach to regenerating strength of thermally damaged glass fibre for reuse in composites. In: ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, GRC. ISBN 9781510896932
Jalalvand, Meisam and Lok Wu, Hon Wing Michael and Sheibanian, Fariborz and Fotouhi, Mohamad and Wisnom, Michael R.; (2018) Self-warning hybrid composite patches for repairing cracked aluminium panels. In: ECCM18 - 18th European Conference on Composite Materials. European Society for Composite Materials.
Jenkins, Peter G. and Yang, Liu and Thomason, James L. (2018) Investigation of the effect of sizing on the tensile and interface properties of continuous basalt fibre and polypropylene. In: ECCM18 - 18th European Conference on Composite Materials, 2018-06-24 - 2018-06-28.
Bryce, David and Yang, Liu and Thomason, James (2018) An investigation of fibre sizing on the interfacial strength of glass-fibre epoxy composites. In: ECCM18 - 18th European Conference on Composite Materials, 2018-06-24 - 2018-06-28.
Thomason, James L. and Yang, Liu and Minty, Ross F. (2018) Are silanes the primary driver of interface strength in glass fibre composites? : exploring the relationship of the chemical and physical parameters which control composite interfacial strength. In: ECCM18 - 18th European Conference on Composite Materials, 2018-06-24 - 2018-06-28.
Bonetti, Valentina; (2018) Inside out : a shift in perspective for building exergy analysis. In: ECOS 2018. University of Minho, PRT. ISBN 978-972-99596-4-6
Brownlie, F. and Anene, C. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2018) Comparison of hot wire TIG stellite 6 weld cladding and lost wax cast stellite 6 under corrosive wear conditions. Wear, 404-405. pp. 71-81. ISSN 0043-1648
Hoste, Jimmy John O.E. and Fossati, Marco and Taylor, Ian J. and Gollan, Rowan J.; Owen, Roger and de Borst, Rene and Reese, Jason and Pearce, Chris, eds. (2018) Turbulence chemistry interaction via eddy dissipation model for scramjet analysis and design. In: Proceedings of the 6th European Conference on Computational Mechanics. International Centre for Numerical Methods in Engineering, CIMNE, GBR, pp. 684-695. ISBN 9788494731167
Su, Wei and Wang, Peng and Zhang, Yonghao and Wu, Lei (2018) A high-order hybridizable discontinuous galerkin method for gas kinetic equation. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15, University of Glasgow.
Gentile, Lorenzo and Giugliano, Dario and Cestino, Enrico and Frulla, Giacomo and Minisci, Edmondo (2018) Optimisation based analysis of the effect of particle spatial distribution on the elastic behaviour of PRMMC. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15, University of Glasgow.
Haeri, Sina and Bailey, Duncan and Calder, Matthew and Clark, Brendan and Rogalsky, Allan and Toyserkani, Ehsan (2018) On the impact of powder cohesion on the bulk properties of a powder bed in Additive Manufacturing using Discrete Element Method (DEM) simulations. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15, University of Glasgow.
Morrison, Niall and Gorash, Yevgen and Hamilton, Robert; Owen, Roger and de Borst, Rene and Reese, Jason and Pearce, Chris, eds. (2018) Comparison of single-solver FSI techniques for the Fe-prediction of a blow-off pressure for an elastomeric seal. In: Proceedings of the 6th European Conference on Computational Mechanics Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018. International Centre for Numerical Methods in Engineering, CIMNE, GBR, pp. 2099-2110. ISBN 9788494731167
Ritos, Konstantinos and Drikakis, D. and Kokkinakis, Ioannis W. (2018) Simulation of multi-mode transition to turbulence in compressible boundary layers using high-order methods. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15, University of Glasgow.
Zhang, Y. and Haeri, S. and Zhang, Y.H. and Pan, G. (2018) A coupled peridynamics and DEM-IB-CLBM method for sand erosion prediction in a viscous fluid. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15, University of Glasgow.
Caboni, M. and Minisci, E. and Riccardi, A. (2018) Aerodynamic design optimization of wind turbine airfoils under aleatory and epistemic uncertainty. Journal of Physics: Conference Series, 1037 (4). 042011. ISSN 1742-6588
Kerr, Emma and Macdonald, Malcolm (2018) Incorporating solar activity into general perturbations analysis of atmospheric friction. Journal of Guidance, Control and Dynamics, 41 (6). pp. 1320-1336. ISSN 1533-3884
Sescu, Adrian and Afsar, Mohammed (2018) Hampering Görtler vortices via optimal control in the framework of nonlinear boundary region equations. Journal of Fluid Mechanics, 848. pp. 5-41. ISSN 0022-1120
Avanzini, Giulio and de Angelis, Emanuele L. and Giulietti, Fabrizio and Minisci, Edmondo (2018) Optimal sizing of electric multirotor configurations. In: 8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation, 2018-09-04 - 2018-09-07, University of Glasgow. (In Press)
Kelly, Daniel and Habashi, Wagdi G. and Quaranta, Giuseppe and Masarati, Pierangelo and Fossati, Marco (2018) Ice accretion effects in helicopter rotor performance via multi-body and CFD approaches. Journal of Aircraft, 55 (3). pp. 1165-1176. ISSN 0021-8669
Konkova, T. and Rahimi, S. and Mironov, S. and Baker, T.N. (2018) Effect of strain level on the evolution of microstructure in a recently developed AD730 nickel based superalloy during hot forging. Materials Characterization, 139. pp. 437-445. ISSN 1044-5803
Lyden, Andrew and Pepper, Russell and Tuohy, Paul G. (2018) A modelling tool selection process for planning of community scale energy systems including storage and demand side management. Sustainable Cities and Society, 39. pp. 674-688. ISSN 2210-6707
Peng, Heng and Liu, Yinghua and Chen, Haofeng and Shen, Jun (2018) Shakedown analysis of engineering structures under multiple variable mechanical and thermal loads using the stress compensation method. International Journal of Mechanical Sciences, 140. pp. 361-375. ISSN 0020-7403
Greco, Cristian and Di Carlo, Marilena and Walker, Lewis and Vasile, Massimiliano (2018) Analysis of NEOs reachability with nano-satallites and low-thrust propulsion. In: 4S Symposium 2018 - Small Satellites Systems and Services, 2018-05-28 - 2018-06-01, Hilton Sorrento Palace.
Allison, John and Bell, Keith and Clarke, Joe and Cowie, Andrew and Elsayed, Ahmed and Flett, Graeme and Oluleye, Gbemi and Hawkes, Adam and Hawker, Graeme and Kelly, Nick and Manuela Marinho de Castro, Maria and Sharpe, Tim and Shea, Andy and Strachan, Paul and Tuohy, Paul (2018) Assessing domestic heat storage requirements for energy flexibility over varying timescales. Applied Thermal Engineering, 136. pp. 602-616. ISSN 1359-4311
Morgantini, Marta and MacKenzie, Donald and Gorash, Yevgen and Van Rijswick, Ralph (2018) The effect of corrosive environment on fatigue life and on mean stress sensitivity factor. MATEC Web of Conferences, 165. 03001. ISSN 2261-236X
Zheng, Xiaotao and Chen, Haofeng and Ma, Zhiyuan (2018) Shakedown boundaries of multilayered thermal barrier systems considering interface imperfections. International Journal of Mechanical Science. ISSN 0020-7403
Zhang, Yue and Zhu, Lianhua and Wang, Ruijie and Guo, Zhaoli (2018) Discrete unified gas kinetic scheme for all Knudsen number flows. III. Binary gas mixtures of Maxwell molecules. Physical Review E, 97 (5). 053306. ISSN 2470-0053
Frank, Michael and Drikakis, Dimitris (2018) Thermodynamics at solid-liquid interfaces. Entropy, 20 (5). 362. ISSN 1099-4300
Benghalia, G. and Rahimi, S. and Wood, J. and Coules, H. and Paddea, S. (2018) Multiscale measurements of residual stress in a low alloy carbon steel weld clad with IN625 superalloy. Materials Performance and Characterization, 7 (4). pp. 606-629. ISSN 2165-3992
Bitharas, I. and McPherson, N. A. and McGhie, W. and Roy, D. and Moore, A. J. (2018) Visualisation and optimisation of shielding gas coverage during gas metal arc welding. Journal of Materials Processing Technology, 255. pp. 451-462. ISSN 0924-0136
Li, Zhen and Ziebart, Marek and Bhattarai, Santosh and Harrison, David and Grey, Stuart (2018) Fast solar radiation pressure modelling with ray tracing and multiple reflections. Advances in Space Research, 61 (9). pp. 2352-2365. ISSN 0273-1177
Oluleye, Gbemi and Allison, John and Kelly, Nicolas and Hawkes, Adam D. (2018) An optimisation study on integrating and incentivising Thermal Energy Storage (TES) in a dwelling energy system. Energies, 11 (5). 1095. ISSN 1996-1073
Tuohy, P.G. and Kelly, N. and Allison, J. and Cowie, A. and Lyden, A. and Flett, G. (2018) Exploring value and performance parameters for thermal energy storage in low carbon buildings and districts. In: 14th International Conference on Energy Storage, 2018-04-25 - 2018-04-28, Çukurova University.
Frank, Michael and Drikakis, Dimitris (2018) Draining water from aircraft fuel using nitrogen enriched air. Energies, 11 (4). 908. ISSN 1996-1073
CHO, Nak-Kyun and Chen, Haofeng and Boyle, James and Xuan, Fu-Zhen (2018) Enhanced fatigue damage under cyclic thermo-mechanical loading at high temperature by structural creep recovery mechanism. International Journal of Fatigue. ISSN 0142-1123
Thomason, James and Yang, Liu and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf and Bashir, Sairah Tahir (2018) Towards a new generation of glass fiber products based on regenerated fiber thermally recycled from end-of-life GRP and GRP manufacturing waste. In: Composites Recycling Conference, 2018-04-10 - 2018-04-12.
Muñoz-Escalona, Patricia and Savage, Kathleen and Conway, Fiona and McLaren, Andrew (2018) Promoting undergraduate student engagement through self-generated exam activity. International Journal of Mechanical Engineering Education. ISSN 0306-4190
Thomason, James and Yang, Liu and Minty, Ross; (2018) Are silanes the primary driver of interface strength in glass fiber composites? An exploration of the relationship of chemical and physical parameters in the micromechanical characterisation of the apparent interfacial strength in glass fiber composites. In: 2018 MACH Conference. The John Hopkins University, USA.
Baker, T. N. (2018) Titanium microalloyed steels. Ironmaking and Steelmaking. ISSN 1743-2812
Wang, Peng and Zhu, Lianhua and Su, Wei and Wu, Lei and Zhang, Yonghao (2018) Nonlinear oscillatory rarefied gas flow inside a rectangular cavity. Physical Review E, 97 (4). ISSN 2470-0053
Zhang, Yunshun and Zheng, Rencheng and Nakano, Kimihiko and Cartmell, Matthew P. (2018) Stabilising high energy orbit oscillations by the utilisation of centrifugal effects for rotating-tyre-induced energy harvesting. Applied Physics Letters, 112 (14). 143901. ISSN 0003-6951
Benedetti, Gianluca and Viola, Nicole and Minisci, Edmondo and Falchi, Alessandro and Vasile, Massimiliano; Vasile, Massimiliano and Minisci, Edmondo and Summerer, Leopold and Mcginty, Peter, eds. (2018) Low-fidelity modelling for aerodynamic characteristics of re-entry objects. In: Stardust Final Conference. Astrophysics and Space Science Proceedings . Springer Netherlands, Cham, pp. 247-264. ISBN 978-3-319-69956-1
Mantesi, Eirini and Hopfe, Christina J. and Cook, Malcolm J. and Glass, Jacqueline and Strachan, Paul (2018) The modelling gap : quantifying the discrepancy in the representation of thermal mass in building simulation. Building and Environment, 131. pp. 74-98. ISSN 0360-1323
White, C. and Borg, M.K. and Scanlon, T.J. and Longshaw, S.M. and John, B. and Emerson, D.R. and Reese, J.M. (2018) dsmcFoam+ : an OpenFOAM based direct simulation Monte Carlo solver. Computer Physics Communications, 224. pp. 22-43. ISSN 0010-4655
Palharini, Rodrigo C. and Scanlon, Thomas J. and White, Craig (2018) Chemically reacting hypersonic flows over 3D cavities : flowfield structure characterisation. Computers and Fluids, 165. pp. 173-187. ISSN 0045-7930
Zhang, Jian and Yang, Lui and Dempster, William and YU, Xinhai and Jia, Jiuhomg and Tu, Shan-Tung (2018) Prediction of blowdown of a pressure relief valve using response surface methodology and CFD techniques. Applied Thermal Engineering, 133. pp. 713-726. ISSN 1359-4311
Gorash, Y. and Bickley, A. and Gozalo, F. (2018) Assessment of leak tightness for swellable elastomeric seals considering fluid-structure interaction with the CEL approach. In: 24th International Conference on Fluid Sealing, 2018-03-07 - 2018-03-08.
Morrison, N. and Gorash, Y. and Hamilton, R. (2018) Consideration of fluid-structure interaction with the CEL approach for the FE-prediction of a blow-off pressure for an elastomeric seal. In: 24th International Conference on Fluid Sealing, 2018-03-07 - 2018-03-08.
Morgantini, Marta and MacKenzie, Donald and Comlekci, Tugrul and van Rijswick, Ralph (2018) The effect of mean stress on corrosion fatigue life. Procedia Engineering, 213. pp. 581-588. ISSN 1877-7058
Okorokov, Volodymyr and Morgantini, Marta and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph (2018) Corrosion fatigue of low carbon steel under compressive residual stress field. Procedia Engineering, 213. pp. 674-681. ISSN 1877-7058
Calautit, Katrina and Aquino, Angelo and Calautit, John Kaiser and Nejat, Payam and Jomehzadeh, Fatemeh and Hughes, Ben Richard (2018) A review of numerical modelling of multi-scale wind turbines and their environment. Computation, 6 (1). 24. ISSN 1866-9964
Lappa, Marcello (2018) On the transport, segregation and dispersion of heavy and light particles interacting with rising thermal plumes. Physics of Fluids, 30 (3). 033302. ISSN 1070-6631
Ho, Minh-Tuan and Zhu, Lianhua and Wu, Lei and Wang, Peng and Guo, Zhaoli and Ma, Jingsheng and Zhang, Yonghao (2018) Pore-scale simulations of rarefied gas flows in porous media. In: 5th European Conference on Microfluidics 2018, 2018-02-28 - 2018-03-02.
Shahzad, Sally and Brennan, John and Theodossopoulos, Dimitris and Calautit, John K. and Hughes, Ben R. (2018) Does a neutral thermal sensation determine thermal comfort? Building Services Engineering Research and Technology, 39 (2). pp. 183-195. ISSN 0143-6244
Arnot, C. S. and McInnes, C. R. and McKay, R. J. and Macdonald, M. and Biggs, J. (2018) Orbit period modulation for relative motion using continuous low thrust in the two-body and restricted three-body problems. Celestial Mechanics and Dynamical Astronomy, 130 (12). ISSN 0923-2958
Ayub, A. S. and Siew, W. H. and Stickland, M. (2018) External lightning protection system for wind turbine blades - power performance. CIGRE Science and Engineering, 10. pp. 88-94. ISSN 1286-1146
Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L. (2018) Kinetics of dissolution of glass fibre in hot alkaline solution. Journal of Materials Science, 53. 1710–1722. ISSN 0022-2461
Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46 (2). pp. 238-244. ISSN 2406-128X
Murray, Robynne E. and Ordonez-Sanchez, Stephanie Eugenia and Porter, Kate E. and Doman, Darrel A. and Pegg, Michael J. and Johnstone, Cameron M. (2018) Towing tank testing of passively adaptive composite tidal turbine blades and comparison to design tool. Renewable Energy, 116 (Part A). pp. 202-214. ISSN 0960-1481
Sutherland, Duncan and Ordonez Sanchez, Stephanie Eugenia and Belmont, Michael R. and Moon, Ian and Steynor, Jeffrey and Davey, Thomas and Bruce, Tom (2018) Experimental optimisation of power for large arrays of cross-flow tidal turbines. Renewable Energy, 116 (Part A). pp. 685-696. ISSN 0960-1481
Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2018) Hierarchical pseudo-ductile hybrid composites combining continuous and highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 105. pp. 40-56. ISSN 1359-835X
Liu, Haihu and Ba, Yan and Wu, Lei and Li, Zhen and Xi, Guang and Zhang, Yonghao (2018) A hybrid lattice Boltzmann and finite difference method for droplet dynamics with insoluble surfactants. Journal of Fluid Mechanics, 837. pp. 381-412. ISSN 0022-1120
Walsh, Angélica and Cóstola, Daniel and Labaki, Lucila Chebel (2018) Performance-based validation of climatic zoning for building energy efficiency applications. Applied Energy, 212. pp. 416-427. ISSN 0306-2619
Vasile, Massimiliano and Torre, Francesco and Serra, Romain and Grey, Stuart (2018) Autonomous orbit determination for formations of cubesats beyond LEO. Acta Astronautica. ISSN 0094-5765
Vasile, Massimiliano and Tardioli, Chiara; Vasile, Massimiliano and Minisci, Edmondo and Summerer, Leopold and McGinty, Peter, eds. (2018) On the use of positive polynomials for the estimation of upper and lower expectations in orbital dynamics. In: Stardust Final Conference. Astrophysics and Space Science Proceedings . Springer, NLD, pp. 99-107. ISBN 9783319699561
Falchi, Alessandro and Minisci, Edmondo and Kubicek, Martin and Vasile, Massimiliano and Lemmens, Stijn; Vasile, Massimiliano and Minisci, Edmondo and Summerer, Leopold and Mcginty, Peter, eds. (2018) HDMR-based sensitivity analysis and uncertainty quantification of GOCE aerodynamics using DSMC. In: Stardust Final Conference. Astrophysics and Space Science Proceedings . Springer Netherlands, Cham, pp. 301-323. ISBN 978-3-319-69956-1
Cartmell, Matthew and Ganilova, Olga and Lennon, Eoin and Shuttleworth, Gavin (2018) Motorised momentum exchange space tethers : the dynamics of asymmetrical tethers and some recent new applications. MATEC Web of Conferences, 148. 01001. ISSN 2261-236X
Garcia, Cristobal and Trendafilova, Irina and Guzman de Viloria, Roberto and Sánchez del Rio, Jose (2018) Triboelectric nanogenerator as self-powered impact sensor. MATEC Web of Conferences, 148. 14005. ISSN 2261-236X
Garcia, Cristobal and Trendafilova, Irina and Zucchelli, Andrea and Contreras, Justin (2018) The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites. MATEC Web of Conferences, 148. 14001. ISSN 2261-236X
Garcia, David and Trendafilova, Irina (2018) Study of Singular Spectrum Analysis as a data-driven technique for damage diagnosis. Comparison between the time or frequency domain. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07.
Hassanati, Bahman and Wheel, Marcus (2018) Size effects on free vibration of heterogeneous beams. MATEC Web of Conferences, 148. 07003. ISSN 2261-236X
Conte, Davide and Di Carlo, Marilena and Ho, Koki and Spencer, David B. and Vasile, Massimiliano (2018) Earth-Mars transfers through Moon distant retrograde orbits. Acta Astronautica, 143. pp. 372-379. ISSN 0094-5765
Yu, Yuan and Liu, Haihu and Zhang, Yonghao and Liang, Dong (2018) Color-gradient lattice Boltzmann modeling of immiscible two-phase flows on partially wetting surface. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (3). pp. 403-404. ISSN 0954-4062
Yu, Yuan and Liu, Haihu and Zhang, Yonghao and Liang, Dong (2018) Color-gradient lattice Boltzmann modeling of immiscible two-phase flows on partially wetting surfaces. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (3). pp. 416-430. ISSN 0954-4062
Czél, Gergely and Rev, Tamas and Jalalvand, Meisam and Fotouhi, Mohamad and Longana, Marco L. and Nixon-Pearson, Oliver J. and Wisnom, Michael R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104. pp. 151-164. ISSN 1359-835X
Frame, J.C. and Wheel, M.A. and Riches, P.E. (2018) A numerical investigation and experimental verification of size effects in loaded bovine cortical bone. International Journal for Numerical Methods in Biomedical Engineering, 34 (1). e2903. ISSN 2040-7939
Garwood, Tom Lloyd and Hughes, Ben Richard and Oates, Michael R. and O'Connor, Dominic and Hughes, Ruby (2018) A review of energy simulation tools for the manufacturing sector. Renewable and Sustainable Energy Reviews, 81 (Part 1). pp. 895-911. ISSN 1879-0690
Haines, Matthew and Taylor, Ian (2018) Numerical investigation of the flow field around low rise buildings due to a downburst event using Large Eddy Simulation. Journal of Wind Engineering and Industrial Aerodynamics, 172. pp. 12-30. ISSN 0167-6105
Macdonald, Malcolm and Owens, Steven Robert (2018) Combined high and low-thrust geostationary orbit insertion with radiation constraint. Acta Astronautica, 142. pp. 1-9. ISSN 0094-5765
Manuela Marinho de Castro, Maria and Sharpe, Timothy and Kelly, Nicolas and Allison, John (2018) A taxonomy of fabric integrated thermal energy storage : a review of storage types and building locations. Future Cities and Environment, 4 (1). ISSN 2363-9075
Griffiths, Alexander D. and Herrnsdorf, Johannes and Lowe, Christopher and Macdonald, Malcolm and Henderson, Robert and Strain, Michael J. and Dawson, Martin D. (2018) Poissonian communications : free space optical data transfer at the few-photon level. Preprint / Working Paper. arXiv.org, Ithaca, NY.
Sousa, P. C. and Vaz, R. and Cerejo, A. and Oliveira, M. S. N. and Alves, M. A. and Pinho, F. T. (2018) Rheological behavior of human blood in uniaxial extensional flow. Journal of Rheology, 62 (2). pp. 447-456. ISSN 1520-8516
Wang, Peng and Ho, Minh Tuan and Wu, Lei and Guo, Zhaoli and Zhang, Yonghao (2018) A comparative study of discrete velocity methods for low-speed rarefied gas flows. Computers and Fluids, 161. pp. 33-46. ISSN 0045-7930
Ortega Absil, Carlos and Ricciardi, Lorenzo A. and Di Carlo, Marilena and Greco, Cristian and Serra, Romain and Polnik, Mateusz and Vroom, Aram and Riccardi, Annalisa and Minisci, Edmondo and Vasile, Massimiliano (2018) GTOC 9 : Results from University of Strathclyde (team Strath++). Acta Futura, 11. pp. 57-70.
Ortega Absil, Carlos and Ricciardi, Lorenzo A. and Di Carlo, Marilena and Greco, Cristian and Serra, Romain and Polnik, Mateusz and Vroom, Aram and Riccardi, Annalisa and Minisci, Edmondo and Vasile, Massimiliano (2018) GTOC9 : Methods and results from University of Strathclyde (team Strath++). Acta Futura (11). pp. 57-70.
Ricciardi, Lorenzo A. and Maddock, Christie Alisa and Vasile, Massimiliano (2018) Multi-objective optimal control of re-entry and abort scenarios. In: AIAA SciTech 2018, 2018-01-08 - 2018-01-12, Gaylord Palms.
Ritos, Konstantinos and Kokkinakis, Ioannis W. and Drikakis, Dimitris; (2018) Physical insight into a Mach 7.2 compression corner flow. In: 2018 AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics, USA. ISBN 9781624105241
Singh, Kevin K. and Drikakis, Dimitris and Frank, Michael and Kokkinakis, Ioannis W. and Alonso, Juan J. and Economon, Tom D. and van der Weide, Edwin T. A.; (2018) Comparison of the finite volume and discontinuous Galerkin schemes for the double vortex pairing problem using the SU2 software suite. In: 2018 AIAA Aerospace Sciences Meeting. AIAA, USA. ISBN 9781624105241
Torre, Francesco and Serra, Romain and Grey, Stuart and Vasile, Massimiliano (2018) Angles-only navigation of a formation in the proximity of a binary system. In: AIAA SciTech 2018, 2018-01-08 - 2018-01-12, Gaylord Palms.
Gao, Song and Habashi, Wagdi G. and Isola, Dario and Baruzzi, Guido S. and Fossati, Marco and Uribarri, Luke; (2018) An edge-based Galerkin formulation for thermal non-equilibrium flows. In: AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624105241
Loiodice, S. and Drikakis, D. and Kokkalis, A. (2018) An efficient algorithm for the retarded time equation for noise from rotating sources. Journal of Sound and Vibration, 412. pp. 336-348. ISSN 0022-460X
Di Carlo, Marilena and Vasile, Massimiliano and Dunlop, Jamie (2018) Low-thrust tour of the main belt asteroids. Advances in Space Research. ISSN 0273-1177
Cho, Nak-Kyun and Chen, Haofeng (2018) Shakedown, ratchet, and limit analyses of 90° back-to-back pipe bends under cyclic in-plane opening bending and steady internal pressure. European Journal of Mechanics - A/Solids, 67. pp. 231-242. ISSN 0997-7538
Frank, Michael and Kio, Michael and Drikakis, Dimitris and Könözsy, László and Asproulis, Nikolaos (2018) Mass and stiffness effects on thermal resistance at the solid-liquid interface of nanofluidic channels. Journal of Computational and Theoretical Nanoscience, 15 (1). pp. 141-146. ISSN 1546-1955
Gong, Jian-Guo and Niu, Tian-Ye and Chen, Haofeng and Xuan, Fu-Zhen (2018) Shakedown analysis of pressure pipeline with an oblique nozzle at elevated temperatures using the Linear Matching Method. International Journal of Pressure Vessels and Piping, 159. pp. 55-66. ISSN 0308-0161
Mohammed Wazed, Saeed and Hughes, Ben Richard and O'Connor, Dominic and Kaiser Calautit, John (2018) A review of sustainable solar irrigation systems for Sub-Saharan Africa. Renewable and Sustainable Energy Reviews, 81 (Part 1). pp. 1206-1225. ISSN 1879-0690
Chen, Xiaohui and Chen, Xu and Chen, Haofeng (2018) Influence of stress level on uniaxial ratcheting effect and ratcheting strain rate in austenitic stainless steel Z2CND18.12N. Steel and Composite Structures, 27 (1). pp. 89-94. ISSN 1229-9367
2017
Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) A study on the Wind-Induced Flutter Energy Harvester (WIFEH) integration into buildings. Energy Procedia, 142. pp. 321-327. ISSN 1876-6102
Burshtein, Noa and Zografos, Konstantinos and Shen, Amy Q. and Poole, Robert J. and Haward, Simon J. (2017) Inertioelastic flow instability at a stagnation point. Physical Review X, 7 (4). 041039. ISSN 2160-3308
Cabaneros, Sheen Mclean S. and Calautit, John Kaiser S. and Hughes, Ben Richard (2017) Hybrid artificial neural network models for effective prediction and mitigation of urban roadside NO2 pollution. Energy Procedia, 142. pp. 3524-3530. ISSN 1876-6102
Calautit, John and Aquino, Angelo and O'Connor, Dominic and Cabaneros, Sheen and Shahzad, Sally and Wazed, Saeed and Garwood, Tom and Calautit, Katrina and Hughes, Ben (2017) Indoor environmental quality (IEQ) analysis of a low energy wind catcher with horizontally-arranged heat transfer devices. Energy Procedia, 142. pp. 2095-2101. ISSN 1876-6102
Garwood, Tom Lloyd and Hughes, Ben Richard and O'Connor, Dominic and Calautit, John K and Oates, Michael R and Hodgson, Thomas (2017) Geometry extraction for high resolution building energy modelling applications from Point Cloud data : a case study of a factory facility. Energy Procedia, 142. pp. 1805-1810. ISSN 1876-6102
Jiang, Jiaren and Xie, Yongsong and Islama, Md. Aminul and Stack, M. M. (2017) The effect of dissolved oxygen in slurry on erosion-corrosion of En30B steel. Journal of Bio- and Tribo-Corrosion, 3. 45. ISSN 2198-4220
O'Connor, Dominic and Calautit, John Kaiser and Hughes, Ben Richard (2017) A novel design of a rotary desiccant system for reduced dehumidification regeneration air temperature. Energy Procedia, 142. pp. 253-258. ISSN 1876-6102
Shahzad, Sally and Calautit, John Kaiser and Aquino, Angelo I. and Nasir, Diana SNM and Hughes, Ben Richard (2017) Neutral thermal sensation or dynamic thermal comfort? Numerical and field test analysis of a thermal chair. Energy Procedia, 142. pp. 2189-2194. ISSN 1876-6102
Wazed, Saeed Mohammed and Hughes, Ben Richard and O'Connor, Dominic and Calautit, John Kaiser (2017) Solar driven irrigation systems for remote rural farms. Energy Procedia, 142. pp. 184-191. ISSN 1876-6102
Heiligers, Jeannette and Parker, Jeffrey S. and Macdonald, Malcolm (2017) Novel solar sail mission concepts for high-latitude earth and lunar observation. Journal of Guidance, Control and Dynamics, 41 (1). pp. 212-230. ISSN 1533-3884
Zhu, Lianhua and Yang, Xiaofan and Guo, Zhaoli (2017) Thermally induced rarefied gas flow in a three-dimensional enclosure with square cross-section. Physical Review Fluids, 2 (12). 123402. ISSN 2469-990X
Talebi, Behrang and Haghigat, Fariborz and Tuohy, Paul Gerard and Mirzaie, Parham (2017) Validation of a district energy system model using field measured data. Energy, n/a. n/a. ISSN 1873-6785
Fidalgo, Joana and Zografos, Konstantinos and Casanellas, Laura and Lindner, Anke and Oliveira, Mónica S. N. (2017) Customised bifurcating networks for mapping polymer dynamics in shear flows. Biomicrofluidics, 11 (6). 064106. ISSN 1932-1058
Hawker, Graeme and Bell, Keith and Flett, Graeme and Allison, John and Cowie, Andrew and Kelly, Nicolas (2017) Local pathways to low-carbon domestic heat : exploring the options in the UK. In: International Conference on Energy Systems Integration, 2017-12-05 - 2017-12-06, National Renewable Energy Laboratory.
Han, Quanfeng and Wang, Zewu and Nash, David H. and Liu, Peiqi (2017) Thermal buckling analysis of cylindrical shell with functionally graded material coating. Composite Structures, 181. pp. 171-182. ISSN 0263-8223
Jalalvand, Meisam and Fotouhi, Mohamad and Wisnom, Michael R. (2017) Orientation-dispersed pseudo-ductile hybrid composite laminates – a new lay-up concept to avoid free-edge delamination. Composites Science and Technology, 153. pp. 232-240. ISSN 0266-3538
Shahzad, Sally and Calautit, John Kaiser and Aquino, Angelo I. and Nasir, Diana S.N.M. and Hughes, Ben Richard (2017) A user-controlled thermal chair for an open plan workplace : CFD and field studies of thermal comfort performance. Applied Energy, 207. pp. 283-293. ISSN 0306-2619
Tardioli, C. and Farnocchia, D. and Rozitis, B. and Cotto-Figueroa, D. and Chesley, S. R. and Statler, T. S. and Vasile, M. (2017) Constraints on the near-Earth asteroid obliquity distribution from the Yarkovsky effect. Astronomy and Astrophysics, 608. A61. ISSN 0004-6361
Bashir, S.T. and Yang, L. and Anderson, R. and Tang, P.L. and Liggat, J.J. and Thomason, J.L. (2017) A simple chemical approach to regenerating the strength of thermally damaged glass fibre. Composites Part A: Applied Science and Manufacturing, 102. pp. 76-87. ISSN 1359-835X
Dumas, Marie-Eve and Habashi, Wagdi and Isola, Dario and Baruzzi, Guido and Fossati, Marco (2017) Finite element modeling of non-equilibrium fluid-wall interaction beyond the continuum regime. Journal of Aircraft, 54 (6). ISSN 0021-8669
Dumas, Marie-Eve and Habashi, Wagdi G. and Baruzzi, Guido S. and Isola, Dario and Fossati, Marco (2017) Finite element modeling of nonequilibrium fluid-wall interaction at high-Mach regime. Journal of Aircraft, 54 (6). pp. 2330-2339. ISSN 0021-8669
Fantino, E. and Flores, R.M. and Di Carlo, M. and Di Salvo, A. and Cabot, E. (2017) Geosynchronous inclined orbits for high-latitude communications. Acta Astronautica, 140. pp. 570-582. ISSN 0094-5765
Haeri, S. (2017) Optimisation of blade type spreaders for powder bed preparation in additive manufacturing using DEM simulations. Powder Technology, 321. pp. 94-104. ISSN 0032-5910
Lappa, Marcello (2017) An alternative theoretical approach for the derivation of analytic and numerical solutions to thermal Marangoni flows. International Journal of Heat and Mass Transfer, 114. 407–418. ISSN 0017-9310
Zhu, Xuanchen and Chen, Haofeng and Xuan, Fuzhen and Chen, Xiaohui (2017) Cyclic plasticity behaviors of steam turbine rotor subjected to cyclic thermal and mechanical loads. European Journal of Mechanics - A/Solids, 66. pp. 243-255. ISSN 0997-7538
Al Bugharbee, Hussein and Trendafilova, Irina (2017) A methodology for fault detection in rolling element bearings using singular spectrum analysis. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07. (In Press)
Al-Bugharbee, Hussein Razzaq Sabah and Abolfathi, Ali and Trendafilova, Irina (2017) Vibration-based damage detection of structure's joints in presence of uncertainty. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07.
Muñoz-Escalona, Patricia and McLaren, Andrew (2017) Online forums : a tool to enhance experimental engineering laboratories. International Journal of Mechanical Engineering Education. ISSN 0306-4190
Lappa, Marcello (2017) Hydrothermal waves in two-dimensional liquid layers with sudden changes in the available cross-section. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (11). pp. 2629-2649. ISSN 0961-5539
Sescu, Adrian and Afsar, Mohammed (2017) Optimal control of Gortler vortices by means of local wall deformations. In: The 70th Annual Meeting of the American Physical Society Division of Fluid Dynamics, 2017-11-19 - 2017-11-21, Colorado Convention Center.
Afsar, Mohammed and Sassanis, Vasilis (2017) Sound radiated by the interaction of non-homogeneous turbulence on a transversely sheared flow with leading and trailing edges of semi-infinite flat plate. In: The 70th Annual Meeting of the American Physical Society Division of Fluid Dynamics, 2017-11-19 - 2017-11-21, Colorado Convention Center.
Sassanis, Vasilis and Afsar, Mohammed and Sescu, Adrian and Lele, Sanjiva (2017) On the existence of an overlap region between the Green’s function for a locally parallel axi-symmetric jet and the leading order non-parallel flow solution. In: The 70th Annual Meeting of the American Physical Society Division of Fluid Dynamics, 2017-11-19 - 2017-11-21, Colorado Convention Center.
Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058
Minisci, Edmondo and Serra, Romain and Vasile, Massimiliano and Riccardi, Annalisa and Grey, Stuart and Lemmens, Stijn (2017) Uncertainty treatment in the GOCE re-entry. In: 1st IAA Conference on Space Situational Awareness (ICSSA), 2017-11-13 - 2017-11-15, DoubleTree by Hilton Hotel.
Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152. pp. 101-110. ISSN 0266-3538
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica (2017) Walls and domain shape effects on the thermal marangoni migration of three-dimensional droplets. Physics of Fluids, 29 (11). 112102. ISSN 1070-6631
Motazedi, Niloufar and Cartmell, Matthew P and Rongong, Jem (2017) Extending the functionality of a symbolic computational dynamic solver by using a novel term-tracking method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062
Herrera Montojo, Javier and Fossati, Marco and Minisci, Edmondo (2017) Shock-conforming mesh generation for aerodynamic analyses at supersonic regimes. Computers and Fluids, 157. pp. 276-293. ISSN 0045-7930
Parsonage, Ben and Hagglund, Philip K. and Keogh, Lloyd and Wheelhouse, Nick and Brown, Richard E. and Dancer, Stephanie J. (2017) Control of antimicrobial resistance requires an ethical approach. Frontiers in Microbiology, 8. 2124. ISSN 1664-302X
Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2017) Advances on creep-fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures, 40 (11). pp. 1854-1867. ISSN 8756-758X
Thiry, Nicolas and Vasile, Massimiliano (2017) Statistical multi-criteria evaluation of non-nuclear asteroid deflection methods. Acta Astronautica, 140. pp. 293-307. ISSN 0094-5765
Vasile, Massimiliano and Minisci, Edmondo and Tang, Ke (2017) Computational intelligence in aerospace science and engineering [Guest Editorial]. IEEE Computational Intelligence Magazine, 12 (4). pp. 12-13. ISSN 1556-6048
Yao, Wei and Luo, Jianjun and Macdonald, Malcolm and Wang, Mingming and Ma, Weihua (2017) An improved differential evolution algorithm and its applications to orbit design. Journal of Guidance, Control and Dynamics. ISSN 1533-3884 (In Press)
Conte, Davide and Di Carlo, Marilena and Budzyn, Dorota and Burgoyne, Hayden and Fries, Dan and Grulich, Maria and Heizmann, Sören and Jethani, Henna and Lapôtre, Mathieu and Roos, Tobias and Serrano Castillo, Encarnación and Schermann, Marcel and Vieceli, Rhiannon and Wilson, Lee and Wynard, Christofer (2017) Advanced concept for a crewed mission to the Martian moons. Acta Astronautica, 139. pp. 545-563. ISSN 0094-5765
Su, Wei and Liu, Haihu and Zhang, Yonghao and Wu, Lei (2017) Rarefaction cloaking : influence of the fractal rough surface in gas slider bearings. Physics of Fluids, 29 (10). 102003. ISSN 1070-6631
Vasile, Massimiliano (2017) Optimising resilience : at the edge of computability. Mathematics Today, 53 (5). pp. 231-234. ISSN 1361-2042
Falchi, Alessandro and Renato, Viola and Minisci, Edmondo and Vasile, Massimiliano (2017) FOSTRAD : An advanced open source tool for re-entry analysis. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.
MacKenzie, Donald; (2017) Stress linearization concepts and restrictions in elastic design by analysis. In: ASME 2017 Pressure Vessels and Piping Conference (PVP2017). American Society of Mechanical Engineers, USA. ISBN 9780791857908
McGrath, Ciara and Macdonald, Malcolm and Lozano, Paulo and Miller, David and Krejci, David (2017) Applications of responsive small satellites with MIT TILE electrospray propulsion. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.
Wisnom, Michael R. and Cantera, M. Asun and Czél, Gergely and Jalalvand, Meisam; Pipes, R. Byron and Yu, Wenbin and Goodsell, Johnathan, eds. (2017) New approaches to quantifying tensile strength variability and size effects in unidirectional composites. In: 32nd Technical Conference of the American Society for Composites 2017. Destech Publications, USA, pp. 2902-2909. ISBN 9781510853065
Ayub, A. S. and Siew, W.H. and Stickland, M. (2017) External lightning protection system for wind turbine blades - aerodynamics. CIGRE Science and Engineering. ISSN 1286-1146
Easton, David and Perez, Marcos and Huang, Jianglin and Rahimi, Salah (2017) Effects of forming route and heat treatment on the distortion behaviour of case-hardened martensitic steel type S156. In: Heat Treat 2017, 2017-10-24 - 2017-10-26.
Lowe, Christopher and Macdonald, Malcolm (2017) Building resilience by connecting the dots. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.
Allison, John and Cowie, Andrew and Galloway, Stuart and Hand, Jon and Kelly, Nicolas and Stephen, Bruce (2017) Simulation, implementation and monitoring of heat pump load shifting using a predictive controller. Energy Conversion and Management, 150. pp. 890-903. ISSN 0196-8904
Hu, Kainan and Meng, Jianping and Zhang, Hongwu and Gu, Xiao-Jun and Emerson, David R and Zhang, Yonghao (2017) A comparative study of boundary conditions for lattice Boltzmann simulations of high Reynolds number flows. Computers and Fluids, 156. pp. 1-8. ISSN 0045-7930
Elharidi, Aly M. and Tuohy, Paul G. and Teamah, Mohamed A. (2017) The energy and indoor environmental performance of Egyptian offices : parameter analysis and future policy. Energy and Buildings. ISSN 0378-7788
Maldonado, Yazmin and Trujillo, Leonardo and Schütze, Oliver and Riccardi, Annalisa and Vasile, Massimiliano; (2017) Preface. In: NEO 2016. Studies in Computational Intelligence . Springer, MEX, v-vi. ISBN 9783319640624
Ghani, Saud and Bialy, Esmail M. and Bakochristou, Foteini and Gamaledin, Seifelislam Mahmoud Ahmad and Rashwan, Mohammed Mohammed and Hughes, Ben (2017) Thermal comfort investigation of an outdoor air-conditioned area in a hot and arid environment. Science and Technology for the Built Environment, 23 (7). pp. 1113-1131. ISSN 2374-474X
Gonzalez Manich, Clara and Gonzalez-Longo, Cristina and Monari, Filippo (2017) La fábrica de piedra durante los siglos XVII y XVIII en Escocia : estudio preliminar. In: X Congreso Nacional y II Congreso Internacional Hispanoamericano de Historia de la Construcción, 2017-10-03 - 2017-10-07, Escuela Técnica Superior de Arquitectura.
Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) Integration of aero-elastic belt into the built environment for low-energy wind harnessing : current status and a case study. Energy Conversion and Management, 149. pp. 830-850. ISSN 0196-8904
Gorash, Yevgen and Comlekci, Tugrul and Hamilton, Robert (2017) CAE-based application for identification and verification of hyperelastic parameters. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (7). pp. 611-626. ISSN 1464-4207
Alobaid, Mohammad and Hughes, Ben and Kaiser Calautit, John and O'Connor, Dominic and Heyes, Andrew (2017) A review of solar driven absorption cooling with photovoltaic thermal systems. Renewable and Sustainable Energy Reviews, 76. pp. 728-742. ISSN 1879-0690
Frank, Michael and Drikakis, Dimitris (2017) Solid-like heat transfer in confined liquids. Microfluidics and Nanofluidics, 21 (9). 148. ISSN 1613-4982
Meco, Sonia and Cozzolino, Luis and Ganguly, Supriyo and Williams, Stewart and McPherson, Norman (2017) Laser welding of steel to aluminium : thermal modelling and joint strength analysis. Journal of Materials Processing Technology, 247. pp. 121-133. ISSN 0924-0136
Pender, K. and Yang, L. (2017) Investigation of the potential for catalysed thermal recycling in glass fibre reinforced polymer composites by using metal oxides. Composites Part A: Applied Science and Manufacturing, 100. pp. 285-293. ISSN 1359-835X
Rida, Mohamad and Kelly, Nicolas (2017) Toward better estimation of HVAC loads : integrating a detailed human thermal model into building simulation. Energy Procedia, 122. pp. 1147-1152. ISSN 1876-6102
Chen, Menghao and Lu, Jiawa and Felfel, Reda M. and Parsons, Andrew J. and Irvine, Derek J. and Rudd, Christopher D. and Ahmed, Ifty (2017) Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites : in-situ polymerisation versus laminate stacking. Composites Science and Technology, 150. pp. 1-15. ISSN 0266-3538
Kerr, Emma and Macdonald, Malcolm and Voigt, Philipp; (2017) Taxonomy and analysis of issues facing post mission disposal concept. In: 68th International Astronautical Congress, IAC 2017. International Astronautical Federation (IAF), AUS, pp. 3735-3744. ISBN 9781510855373
Theodorou, Ilias and Clemente, Carmine and Vasile, Massimiliano; (2017) Space object detection and characterisation with a passive space-borne bistatic radar. In: 68th International Astronautical Congress, IAC 2017. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), AUS, pp. 341-345. ISBN 9781510855373
Greco, Cristian and Vasile, Massimiliano; (2017) Novel piecewise trajectory shaping in Hill's canonical variables. In: 68th International Astronautical Congress (IAC) 2017. International Astronautical Federation (IAF), Paris. ISBN 9781510855373
Wilson, Andrew Ross and Vasile, Massimiliano; (2017) Integrating life cycle assessment of space systems into the concurrent design process. In: 68th International Astronautical Congress. International Astonautical Federation, AUS.
Hoste, Jimmy-John O.E. and Fossati, Marco and Taylor, Ian J. and Gollan, Rowan J. (2017) Modeling scramjet supersonic combustion via Eddy Dissipation Model. In: 68th International Astronautical Congress (IAC), 2017-09-25 - 2017-09-29.
Maddock, Christie and Toso, Federico and West, Michael and West, Joanne and Kontis, Kostantinos and Rengarajan, Sriram and Evans, David and Milne, Andy and McIntyre, Stuart; (2017) Conceptual design analysis for a two-stage-to-orbit semi-reusable launch system for small satellites. In: 68th Proceedings of the International Astronautical Congress. International Astronautical Federation (IAF), AUS.
Ortega Absil, Carlos and Filippi, Gianluca and Riccardi, Annalisa and Vasile, Massimiliano (2017) A variance-based estimation of the resilience indices in the preliminary design optimisation of engineering systems under epistemic uncertainty. In: EUROGEN 2017, 2017-09-13 - 2017-09-15, Naval Engineering School.
Renato, Viola and Scanlon, Thomas (2017) Multi-dimensional ablation and thermal response program for Martian entry analysis. In: 68th International Astronautical Congress (IAC), 2017-09-25 - 2017-09-29.
Thomason, James and Yang, Liu and Gentles, Fiona (2017) Characterisation of the anisotropic thermoelastic properties of natural fibres for composite reinforcement. Fibers, 5 (4). ISSN 2079-6439
Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano (2017) CAMELOT-Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox. CEAS Space Journal. ISSN 1868-2510
Liu, Haihu and Zhang, Yonghao (2017) Lattice Boltzmann simulation of the trapping of a microdroplet in a well of surface energy. Computers and Fluids, 155. pp. 68-75. ISSN 0045-7930
Garcia, Cristobal and Wilson, Jodi and Trendafilova, Irina and Yang, Liu (2017) Vibratory behaviour of glass fibre reinforced polymer (GFRP) interleaved with nylon nanofibers. Composite Structures, 176. pp. 923-932. ISSN 0263-8223
Vasile, Massimiliano and Filippi, Gianluca and Ortega Absil, Carlos and Riccardi, Annalisa (2017) Fast belief estimation in evidence network models. In: EUROGEN 2017, 2017-09-13 - 2017-09-15, Naval Engineering School.
Okorokov, Volodymyr and Gorash, Yevgen (2017) A comparative study between conventional and elevated temperature creep autofrettage. Procedia Structural Integrity, 5. pp. 202-209. ISSN 2452-3216
Fu, Song and Johnstone, Cameron (2017) Evaluating the dynamics of tension mooring supported tidal turbines. In: 12th European Wave and Tidal Energy Conference, 2017-08-27 - 2017-09-01, University College Cork.
Ordonez-Sanchez, Stephanie and Sutherland, Duncan and Payne, Gregory and Bruce, Tom and Gebreslassie, Mulualem and Belmont, Michael R. and Moon, Ian (2017) Experimental evaluation of the wake characteristics of cross flow turbine arrays. Ocean Engineering, 141. 215–226. ISSN 0029-8018
Rojas-Cadénas, Marcos and Silva, Ernane and Deschamps, César J. and Ho, Minh-Tuan and Graur, Irina (2017) A new dynamic methodology for stationary and transient mass flow rate measurements. In: 23ème Congrès Français de Mécanique (CFM2017), 2017-08-28 - 2017-09-01.
Lowe, Christopher J. and Macdonald, Malcolm (2017) Resource considerate data routing through satellite networks. Journal of Aerospace Information Systems, 14 (8). 472–482. ISSN 2327-3097
Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2017) Generalized rapid-distortion theory on transversely sheared mean flows with physically realizable upstream boundary conditions : application to trailing edge problem. Journal of Fluid Mechanics, 824. pp. 477-512. ISSN 0022-1120
Connolly, S. and MacKenzie, D. (2017) Hyperelastic material characterisation of rubber by means of novel experimentation and reverse engineering. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.
Connolly, Stephen John and MacKenzie, Donald and Comlekci, Tugrul (2017) Multi-objective optimization of hyperelastic material constants : a feasibility study. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.
Murray, Robynne E. and Ordonez Sanchez, Stephanie Eugenia and Porter, Kate and Doman, Darrel A. and Pegg, Michael J. and Johnstone, Cameron (2017) Towing tank and flume testing of passively adaptive composite tidal turbine blades. In: 12th European Wave and Tidal Energy Conference, 2017-08-27 - 2017-09-01, University College Cork.
Ordonez Sanchez, Stephanie Eugenia and Porter, Kate and Ellis, Rob and Frost, Carwyn and Allmark, Matthew and Nevalainen, Thomas and O’Doherty, Tim and Johnstone, Cameron (2017) Numerical modelling techniques to predict rotor imbalance problems in tidal stream turbines. In: 12th European Wave and Tidal Energy Conference, 2017-08-27 - 2017-09-01, University College Cork.
Porter, Kate and Ordonez-Sanchez, Stephanie and Johnstone, Cameron and Conesa, Stephanie (2017) Integration of a direct drive contra-rotating generator with point absorber wave energy converters. In: 12th European Wave and Tidal Energy Conference, 2017-08-27 - 2017-09-01, University College Cork.
Czél, Gergely and Suwarta, Putu and Jalalvand, Meisam and Wisnom, Michael R. (2017) Investigation of the compression performance and failure mechanism of pseudo-ductile thin-ply hybrid composites. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Fotouhi, Mohamad and Xiao, Bill and Pozegic, Thomas and Jalalvand, Meisam and Hamerton, Ian and Wisnom, Michael R. (2017) High performance piezo electric nanocomposite sensor nodes for structural health monitoring. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Jalalvand, Meisam and Fotouhi, Mohammad and Leong, Mun Choong and Wisnom, Michael R. (2017) A novel technique to accurately measure the fibre failure strain in composite laminates under a combined in-plane tension and shear stress state. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Rev, T. and Czél, G. and Jalalvand, M. and Wisnom, M. R. (2017) Unidirectional hybrid composite overload sensors. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Rev, Tamas and Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2017) UD hybrid composite overload sensors. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Su, Wei and Lindsay, Scott and Liu, Haihu and Wu, Lei (2017) Comparative study of the discrete velocity and lattice Boltzmann methods for rarefied gas flows through irregular channels. Physical Review E, 96 (2). 023309. ISSN 2470-0053
Cho, Nak-Kyun and Chen, Haofeng (2017) Investigation of structural creep strain recovery and its impact on structural integrity. In: 24th International Conference on Structural Mechanics in Reactor Technology, 2017-08-20 - 2017-08-25, BEXCO/Centum Hotel.
Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2017) Demonstration of pseudo-ductility in all fibre directions of high performance quasi-isotropic thin ply carbon/glass hybrid composites. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.
Gorash, Y. and Bickley, A. and Gozalo, F.; Lion, Alexander and Johlitz, Michael, eds. (2017) Improvement of leak tightness for swellable elastomeric seals through the shape optimization. In: Constitutive Models for Rubber X. CRC Press/Balkema, DEU, pp. 453-458. ISBN 9781138030015
Clarke, Joseph and Costola, Daniel and Kelly, Nicolas and Monari, Filippo; (2017) A 'big data' approach to the application of building performance simulation to improve the operational performance of large estates. In: Building Simulation 2017. International Building Performance Simulation Association, USA.
Cowie, Andrew and Kelly, Nick and McGhee, Raheal and Samuel, Aizaz and Higgins, Ciaran Andrew and Peat, Watson; (2017) Predicting the effect of changes to the urban environment on future electrical demand using building simulation and archetype models. In: Proceedings of Building Simulation 2017. International Building Performance Simulation Association, USA, pp. 455-464.
Monari, Filippo and Strachan, Paul (2017) CALIBRO : an R package for the automatic calibration of building energy simulation models. In: Building Simulation 2017, 2017-08-07 - 2017-08-09, Hyatt Regency Embarcadero.
Zhang, Jiaying and Zhang, Chen and Hao, Lin and Nie, Rui and Qiu, Jinhao (2017) Exploiting the instability of smart structure for reconfiguration. Applied Physics Letters, 111 (6). 064102. ISSN 0003-6951
Bi, Sifeng and Ouisse, Morvan and Foltête, Emmanuel and Jund, Arnaud (2017) Virtual decoupling of vibroacoustical systems. Journal of Sound and Vibration, 401. pp. 169-189. ISSN 0022-460X
Lappa, Marcello (2017) On the oscillatory hydrodynamic modes in liquid metal layers with an obstruction located on the bottom. International Journal of Thermal Sciences, 118. pp. 303-319. ISSN 1290-0729
Payne, Grégory S. and Stallard, Tim and Martinez, Rodrigo (2017) Design and manufacture of a bed supported tidal turbine model for blade and shaft load measurement in turbulent flow and waves. Renewable Energy, 107. pp. 312-326. ISSN 0960-1481
Wu, Lei and Ho, Minh Tuan and Germanou, Lefki and Gu, X.J. and Liu, Chang and Xu, Kun and Zhang, Yonghao (2017) On the apparent permeability of porous media in rarefied gas flows. Journal of Fluid Mechanics, 822. pp. 389-417. ISSN 0022-1120
Zhang, Jiaying and McInnes, Colin R. (2017) Using instability to reconfigure smart structures in a spring-mass model. Mechanical Systems and Signal Processing, 91. pp. 81-92. ISSN 0888-3270
Josifovic, Aleksandar and Stickland, Matthew and Iannetti, Aldo and Corney, Jonathan; (2017) Engineering procedure for positive displacement pump performance analysis based on 1D and 3D CFD commercial codes. In: Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASME, USA. ISBN 9780791858110
MacKenzie, Alasdair and Škurić, Vanja and Stickland, MT and Dempster, WM (2017) A new hybrid slurry CFD model compared with experimental results. In: 12th OpenFOAM® Workshop, 2017-07-24 - 2017-07-27, University of Exeter.
Islam, Md Towhidul and Felfel, Reda M and Abou Neel, Ensanya A and Grant, David M and Ahmed, Ifty and Hossain, Kazi M Zakir (2017) Bioactive calcium phosphate–based glasses and ceramics and their biomedical applications : a review. Journal of Tissue Engineering, 8. pp. 1-16. ISSN 2041-7314
Bisht, Manju and Haeri, Sina and Patil, Dhiraj V. (2017) Fluid flow in wall-driven enclosures with corrugated bottom. Computers and Fluids, 152. pp. 1-13. ISSN 0045-7930
Anwar, Ali A.; Dempster, William and Gorash, Yevgen, eds. (2017) 3D micro-macro fluid-structure model of pressure relief valve leak tightness. In: ASME 2017 Pressure Vessels and Piping Conference. ASME, USA. ISBN 9780791857984
Anwar, Ali A.; Dempster, William and Gorash, Yevgen and Nash, David, eds. (2017) Surface roughness 3D modelling and its association with leak tightness for a metal-to-metal contacting surface. In: ASME 2017 Pressure Vessels and Piping Conference. ASME, USA. ISBN 978-0-7918-5797-7
Maddalena, Giulio and Diveu, Alexis and Ducamp, Christophe and Minisci, Edmondo and Riccardi, Annalisa (2017) Uncertainty based multidisciplinary design optimisation of conventional space transportation systems. In: 15th EUROPT Workshop on Advances in Continuous Optimization, 2017-07-12 - 2017-07-14.
Ortega, C. and Vasile, M.; (2017) New heuristics for multi-objective worst-case optimization in evidence-based robust design. In: 2017 IEEE Congress on Evolutionary Computation (CEC). Institute of Electrical and Electronics Engineers Inc., ESP, pp. 1519-1526. ISBN 9781509046010
Falchi, Alessandro and Minisci, Edmondo and Vasile, Massimiliano and Rastelli, Davide and Bellini, Niccolò (2017) DSMC-based correction factor for low-fidelity hypersonic aerodynamics of re-entering objects and space debris. In: 7th European Conference for Aeronautics and Space Sciences, 2017-07-03 - 2017-07-06.
McGhee, Raheal and Clarke, Joseph and Svehla, Katalin; Brotas, Luisa and Roaf, Susan and Nicol, Fergus, eds. (2017) Assessing policy constraints and technical feasibility of energy developments in cities. In: Design to Thrive. PLEA, GBR, pp. 1446-1453. ISBN 978-0-9928957-5-4
Lappa, Marcello (2017) On the multiplicity and symmetry of particle attractors in confined non-isothermal fluids subjected to inclined vibrations. International Journal of Multiphase Flow, 93. pp. 71-83. ISSN 0301-9322
Vetrisano, Massimo and Vasile, Massimiliano (2017) Analysis of spacecraft disposal solutions from LPO to the Moon with high order polynomial expansions. Advances in Space Research, 60 (1). pp. 38-56. ISSN 0273-1177
Walsh, Angélica and Cóstola, Daniel and Labaki1, Lucila C. (2017) Comparison of three climatic zoning methodologies for building energy efficiency applications. Energy and Buildings, 146. pp. 111-121. ISSN 0378-7788
Wu, Lei and Struchtrup, Henning (2017) Assessment and development of the gas kinetic boundary condition for the Boltzmann equation. Journal of Fluid Mechanics, 823. pp. 511-537. ISSN 0022-1120
Gorash, Yevgen and Zhou, Xingguo and Comlekci, Tugrul and Mackenzie, Donald and Bayyouk, Jacob; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Consideration of weld distortion throughout the identification of fatigue curve parameters using mean stress correction. In: FATIGUE 2017. Engineering Integrity Society, GBR, pp. 366-377. ISBN 9780954436834
Okorokov, Volodymyr and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph and Gorash, Yevgen; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Implementation of plasticity model for a steel with mixed cyclic softening and hardening and its application to fatigue assessments. In: Fatigue 2017 Proceedings of the 7th Engineering Integrity Society International Conference on Durability & Fatigue. Engineering Integrity Society, GBR, pp. 72-81. ISBN 9780954436834
Persico, Adriano Rosario and Clemente, Carmine and Gaglione, Domenico and Ilioudis, Christos V. and Cao, Jianlin and Pallotta, Luca and De Maio, Antonio and Proudler, Ian and Soraghan, John J. (2017) On model, algorithms and experiment for micro-doppler based recognition of ballistic targets. IEEE Transactions on Aerospace and Electronic Systems, 53 (3). pp. 1088-1108. ISSN 0018-9251
Allison, John and Bell, Keith and Clarke, Joe and Cowie, Andrew and Elsayed, Ahmed and Flett, Graeme and Gbemi, Oluleye and Hawkes, Adam and Hawker, Graeme and Kelly, Nick and Manuela Marinho de Castro, Maria and Sharpe, Timothy and Shea, Andy and Strachan, Paul (2017) Domestic thermal storage requirements for heat demand flexibility. In: The 4th Sustainable Thermal Energy Management International Conference, 2017-06-28 - 2017-06-30, The Golden Tulip Hotel.
Sescu, Adrian and Taoudi, Lamaie and Afsar, Mohammed (2017) Iterative control of Görtler vortices via local wall deformations. Theoretical and Computational Fluid Dynamics. pp. 1-10. ISSN 1432-2250
Feng, Jinglang and Hou, Xiyun (2017) Dynamics around equilibrium points of uniformly rotating asteroids. Astronomical Journal, 154 (1). ISSN 0004-6256
Gorash, Yevgen and MacKenzie, Donald (2017) On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour. Open Engineering, 7 (1). pp. 126-140. ISSN 2391-5439
Youngs, David L. (2017) Rayleigh-Taylor mixing : Direct numerical simulation and implicit large eddy simulation. Physica Scripta, 92 (7). 074006. ISSN 0031-8949
Afsar, M. Z. and Sescu, A. and Sassanis, V. and Lele, S. K. (2017) Towards the prediction of supersonic jet noise predictions using a unified asymptotic approximation for the adjoint vector Green's function. In: 23rd AIAA/CEAS Aeroacoustics Conference, 2017-06-05 - 2017-06-09.
Vasile, Massimiliano and Torre, Francesco and Serra, Romain and Grey, Stuart (2017) Autonomous orbit determination and navigation for formations of CubeSats beyond LEO. In: 9th International Workshop on Satellite Constellations and Formation Flying, 2017-06-19 - 2017-06-21, University of Colorado Boulder.
Barbera, Daniele and Chen, Haofeng and Liu, Yinghua and Xuan, Fuzhen (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139 (5). 051101. ISSN 0094-9930
Lappa, Marcello and Ferialdi, Hermes (2017) On the oscillatory hydrodynamic instability of gravitational thermal flows of liquid metals in variable cross-section containers. Physics of Fluids, 29 (6). 064106. ISSN 1070-6631
Capon, C.J. and Brown, M. and White, C. and Scanlon, T. and Boyce, R.R. (2017) pdFOAM : a PIC-DSMC code for near-Earth plasma-body interactions. Computers and Fluids, 149. pp. 160-171. ISSN 0045-7930
Bonetti, Valentina; Nižetić, Sandro and Šolić, Petar and Milanović, Željka, eds. (2017) Dynamic exergy analysis for the built environment : fixed or variable reference? In: Proceedings of the 9th Exergy, Energy and Environment Symposium. FESB, University of Split, Split, Croatia, pp. 924-939. ISBN 9789532900699
Flockhart, Gordon M. H. and Keating, Barbara A. and McLaren, Andrew (2017) The Engineering Academy : increasing access to engineering. In: 3rd International Enhancement in Higher Education Conference, 2017-06-06 - 2017-06-08, Radisson Blu Hotel.
Di Carlo, Marilena and Vasile, Massimiliano and Kemble, Stephen (2017) Optimised GTO-GEO transfer using low-thrust propulsion. In: 31st International Symposium on Space Technology and Science (ISTS), 2017-06-03 - 2017-06-09.
Renato, Viola and Scanlon, Thomas and Brown, Richard (2017) Multi-dimensional ablation and thermal response program for re-entry analysis. In: 31st International Symposium on Space Technology and Science (ISTS), 2017-06-03 - 2017-06-09.
Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2017) Investigation of fatigue assessments accuracy for beam weldments considering material data input and FE-mode type. Journal of Physics: Conference Series, 843. 012025. ISSN 1742-6596
Ganilova, Olga and Low, Jia (2017) Application of smart honeycomb structures for automotive passive safety. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070
Shahzad, Sally and Hughes, Ben and Calautit, John Kaiser and Nasir, Diana SNM (2017) Computational and field test analysis of thermal comfort performance of user-controlled thermal department in an open plan office. Energy Procedia, 105. pp. 2635-2640. ISSN 1876-6102
Wu, Lei and Zhang, Jun and Liu, Haihu and Zhang, Yonghao and Reese, Jason M. (2017) A fast iterative scheme for the linearized Boltzmann equation. Journal of Computational Physics, 338. 431–451. ISSN 0021-9991
Torre, Francesco and Vasile, Massimiliano and Serra, Romain and Grey, Stuart (2017) Autonomous navigation of a formation of spacecraft in the proximity of a binary asteroid. In: International Symposium on Space Technology and Science, 2017-06-03 - 2017-06-09.
Al-Bugharbee, H and Trendafilova, I (2017) A new methodology for fault detection in rolling element bearings using singular spectrum analysis. International Journal of Condition Monitoring, 7 (2). pp. 26-35. ISSN 2047-6426
Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) Urban integration of aeroelastic belt for low-energy wind harvesting. Energy Procedia, 105. pp. 738-743. ISSN 1876-6102
Calautit, John Kaiser and Aquino, Angelo I. and Shahzad, Sally and Nasir, Diana S.N.M. and Hughes, Ben Richard (2017) Thermal comfort and indoor air quality analysis of a low-energy cooling windcatcher. Energy Procedia, 105. pp. 2865-2870. ISSN 1876-6102
Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2017) Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition - part II : parametric study and proposed design equations. Thin-Walled Structures, 114. 92–106. ISSN 0263-8231
Rojas-Cadénas, Marcos and Silva, Ernane and Ho, Minh Tuan and Deschamps, César J. and Graur, Irina (2017) Time-dependent methodology for non-stationary mass flow rate measurements in a long micro-tube : experimental and numerical analysis at arbitrary rarefaction conditions. Microfluidics and Nanofluidics, 21 (5). 86. ISSN 1613-4982
Yamaguchi, H. and Ho, M. T. and Matsuda, Y. and Niimi, T. and Graur, I. (2017) Conductive heat transfer in a gas confined between two concentric spheres : from free-molecular to continuum flow regime. International Journal of Heat and Mass Transfer, 108 (Part B). pp. 1527-1534. ISSN 0017-9310
Grey, Stuart and Marchand, Richard and Ziebart, Marek and Omar, Roghaiya (2017) Sunlight illumination models for spacecraft surface charging. IEEE Transactions on Plasma Science. ISSN 1939-9375
Wang, Peng and Zhang, Yonghao and Guo, Zhaoli (2017) Numerical study of three-dimensional natural convection in a cubical cavity at high Rayleigh numbers. International Journal of Heat and Mass Transfer, 113. pp. 217-228. ISSN 0017-9310
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N.; (2017) Numerical simulations of the thermocapillary migration of a deformable Newtonian droplet in an Oldroyd-B matrix fluid in stokes flow conditions. In: 30th Scottish Fluid Mechanics Meeting. University of Strathclyde, Glasgow, UK. ISBN 9781527209725
Ferialdi, Hermes and Lappa, Marcello (2017) Oscillatory motion of liquid metals in non-isothermal geometries with converging or diverging walls. In: 30th Scottish Fluid Mechanics Meeting, 2017-05-19 - 2017-05-19, University of Strathclyde.
García, David and Trendafilova, Irina and Inman, Daniel J.; (2017) Delamination detection and growth assessment in composite laminated beams through data-driven vibration structural health monitoring. In: 14th International Conference on Engineering Structural Integrity Assessment (ESIA14). EMAS Publishing, Warrington.
Gradinscak, Tomislav and Lappa, Marcello (2017) Oscillatory compressible thermal convection in vertical and inclined differentially heated cavities. In: 30th Scottish Fluid Mechanics Meeting, 2017-05-19 - 2017-05-19, University of Strathclyde.
Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard (2017) Optimisation and analysis of a heat pipe assisted low-energy passive cooling system. Energy and Buildings, 143. pp. 220-233. ISSN 0378-7788
Ojo, Anthony O. and Fond, Benoit and Abram, Christopher and Van Wachem, Berend G. M. and Heyes, Andrew L. and Beyrau, Frank (2017) Thermographic laser Doppler velocimetry using the phase-shifted luminescence of BAM:Eu2+ phosphor particles for thermometry. Optics Express, 25 (10). pp. 11833-11843. ISSN 1094-4087
Uzzaman, Asraf and Lim, James B.P. and Nash, David and Young, Ben (2017) Effects of edge-stiffened circular holes on the web crippling strength of cold-formed steel channel sections under one-flange loading conditions. Engineering Structures, 139. 96–107. ISSN 0141-0296
Ganilova, O. A. and Awaludin, A. and Dong, R. (2017) Hybrid energy harvesting based on cymbal and wagon wheel inspiration. Journal of Intelligent Material Systems and Structures. pp. 1-22. ISSN 1530-8138
Hadj-Nacer, Mustafa and Maharjan, Dilesh and Ho, Minh-Tuan and Stefanov, Stefan K. and Graur, Irina and Greiner, Miles (2017) Continuum and kinetic simulations of heat transfer through rarefied gas in annular and planar geometries in the slip regime. Journal of Heat Transfer, 139 (4). 042002. ISSN 0022-1481
Jomehzadeh, Fatemeh and Nejat, Payam and Calautit, John Kaiser and Yusof, Mohd Badruddin Mohd and Zaki, Sheikh Ahmad and Hughes, Ben Richard and Yazid, Muhammad Noor Afiq Witri Muhammad (2017) A review on windcatcher for passive cooling and natural ventilation in buildings, part 1 : indoor air quality and thermal comfort assessment. Renewable and Sustainable Energy Reviews, 70. pp. 736-756. ISSN 1879-0690
Falchi, Alessandro and Minisci, Edmondo and Vasile, Massimiliano and Kubicek, Martin (2017) Aero-thermal re-entry sensitivity analysis using DSMC and a high dimensional model representation-based approach. In: 7th European Conference on Space Debris, 2017-04-18 - 2017-04-21, ESA/ESOC.
Grey, Stuart (2017) Deformation of space debris and subsequent changes in orbit during eclipse due to solar and earth radiation fluxes. In: 7th European Conference on Space Debris, 2017-04-18 - 2017-04-21, ESA/ESOC.
Md Idriss, A. N. and Maleque, M.A. and Yaacob, I. I. and Nasir, R. M. and Mridha, S. and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. pp. 1-8. ISSN 0267-0836
Oi, Daniel KL and Ling, Alex and Vallone, Giuseppe and Villoresi, Paolo and Greenland, Steve and Kerr, Emma and Macdonald, Malcolm and Weinfurter, Harald and Kuiper, Hans and Charbon, Edoardo and Ursin, Rupert (2017) CubeSat quantum communications mission. EPJ Quantum Technology, 4. 6. ISSN 2196-0763
Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A. M. (2017) Effect of nitriding on the corrosive wear performance of a single and double layer Stellite 6 weld cladding. Wear, 376-377 (B). pp. 1279-1285. ISSN 0043-1648
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and Steel, Russell and Zhu, Wenzhong and Iqbal, Naveed (2017) Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing. Materials & Design, 120. pp. 22-35. ISSN 0264-1275
Allison, John and Cowie, Andrew and Galloway, Stuart and Hand, Jon and Kelly, Nick and Stephen, Bruce (2017) Simulation and implementation of heat load shifting in a low carbon building. In: The 4th Sustainable Thermal Energy Management International Conference, 2017-06-28 - 2017-06-30, The Golden Tulip Hotel. (In Press)
McGinty, Sean and McCormick, Christopher and McKittrick, Craig Martin and Kennedy, Simon and Oldroyd, Keith G. and Wheel, Marcus and Scullion, Bryan and Pontrelli, Giuseppe and McKee, Sean; Nithiarasu, P. and Robertson, A.M., eds. (2017) Combining mathematical modelling with in-vitro experiments to predict in-vivo drug-eluting stent kinetics. In: 5th International Conference on Computational and Mathematical Biomedical Engineering (CMBE2017). Zeta Computational Resources Ltd., USA, pp. 1011-1014. ISBN 9780956291448
Hoste, Jimmy John O.E. and Casseau, Vincent and Fossati, Marco and Taylor, Ian J. and Gollan, Rowan J.; (2017) Numerical modeling and simulation of supersonic flows in propulsion systems by open-source solvers. In: 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017. American Institute of Aeronautics and Astronautics Inc, AIAA, CHN. ISBN 9781624104633
Di Carlo, Marilena and Romero Martin, Juan Manuel and Ortiz Gomez, Natalia and Vasile, Massimiliano (2017) Optimised low-thrust mission to the Atira asteroids. Advances in Space Research, 59 (7). pp. 1724-1739. ISSN 0273-1177
Flett, Graeme and Kelly, Nick (2017) A disaggregated, probabilistic, high resolution method for assessment of domestic occupancy and electrical demand. Energy and Buildings, 140. pp. 171-187. ISSN 0378-7788
Zhu, Lianhua and Chen, Songze and Guo, Zhaoli (2017) dugksFoam : An open source OpenFOAM solver for the Boltzmann model equation. Computer Physics Communications, 213. pp. 155-164. ISSN 0010-4655
Villaneuva, J. and Trino, L. and Thomas, J. and Bijukumar, D. and Royhman, D. and Stack, M. M. and Mathew, M. T. (2017) Corrosion, tribology and tribocorrosion research in biomedical implants : progressive trend in the published literature. Journal of Bio- and Tribo-Corrosion, 3 (1). 1. ISSN 2198-4220
Lappa, Marcello and Drikakis, Dimitris and Kokkinakis, Ioannis (2017) On the propagation and multiple reflections of a blast wave travelling through a dusty gas in a closed box. Physics of Fluids, 29 (3). 033301. ISSN 1070-6631
Antoniadis, Antonis F. and Tsoutsanis, Panagiotis and Drikakis, Dimitris (2017) Assessment of high-order finite volume methods on unstructured meshes for RANS solutions of aeronautical configurations. Computers and Fluids, 146. pp. 86-104. ISSN 0045-7930
MacKenzie, Alasdair (2017) A hybrid slurry CFD model : Euler-Euler to Euler-Lagrange Tutorial. Chalmers University, Gothenburg, Gothenburg.
Yuan, Jie and Scarpa, Fabrizio and Allegri, Giuliano and Titurus, Branislav and Patsias, Sophoclis and Rajasekaran, Ramesh (2017) Efficient computational techniques for mistuning analysis of bladed discs : a review. Mechanical Systems and Signal Processing, 87 (Part A). pp. 71-90. ISSN 0888-3270
Zhu, Lianhua and Wang, Peng and Guo, Zhaoli (2017) Performance evaluation of the general characteristics based off-lattice Boltzmann scheme and DUGKS for low speed continuum flows. Journal of Computational Physics, 333. pp. 227-246. ISSN 0021-9991
Yousefi, Amir M. and Uzzaman, Asraf and Lim, James B.P. and Clifton, G. Charles and Young, Ben (2017) Web crippling strength of cold-formed stainless steel lipped channels with web perforations under end-two-flange loading. Advances in Structural Engineering. pp. 1-46. ISSN 2048-4011
Maddock, Christie Alisa and Toso, Federico and Ricciardi, Lorenzo and Mogavero, Alessandro and Lo, Kin Hing and Rengarajan, Sriram and Kontis, Kostantinos and Milne, Andy and Merrifield, Jim and Evans, David and West, Michael and McIntyre, Stuart; (2017) Vehicle and mission design of a future small payload launcher. In: 21st AIAA International Space Planes and Hypersonic Systems and Technologies Conference. International Space Planes and Hypersonic Systems and Technologies Conferences . American Institute of Aeronautics and Astronautics Inc, AIAA, CHN. ISBN 9781624104633
Toso, Federico and Maddock, Christie; (2017) Return and abort trajectory optimisation for reusable launch vehicles. In: Proceedings of the 21st AIAA International Space Planes and Hypersonic Systems and Technologies Conference. International Space Planes and Hypersonic Systems and Technologies Conferences . American Institute of Aeronautics and Astronautics Inc, AIAA, CHN. ISBN 9781624104633
Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano (2017) Automatic trajectory planning for low-thrust active removal mission in Low-Earth Orbit. Advances in Space Research, 59 (5). pp. 1234-1258. ISSN 0273-1177
Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2017) Web crippling behaviour of cold-formed steel channel sections with web holes subjected to Interior-one-flange loading condition-part I : experimental and numerical investigation. Thin-Walled Structures, 111. 103–112. ISSN 0263-8231
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and McNutt, Philip and Iqbal, Naveed (2017) The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing. Applied Surface Science, 396. pp. 1635-1648. ISSN 0169-4332
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and McNutt, Philip and Iqbal, Naveed (2017) The erosion performance of particle reinforced metal matrix composite coatings produced by co-deposition cold gas dynamic spraying. Applied Surface Science, 396. pp. 1623-1634. ISSN 0169-4332
Yousefi, Amir M. and Uzzaman, Asraf and Lim, James B.P. and Clifton, G. Charles and Young, Ben (2017) Numerical investigation of web crippling strength in cold-formed stainless steel lipped channels with web openings subjected to interior-two-flange loading condition. Steel and Composite Structures, 23 (4). pp. 363-383. ISSN 1229-9367
Lappa, Marcello and Ferialdi, Hermes (2017) On the general properties of steady gravitational thermal flows of liquid metals in variable cross-section containers. Review of Applied Physics, 5 (1). pp. 1-10. ISSN 2327-1612
Zhu, Lianhua and Guo, Zhaoli (2017) Numerical study of nonequilibrium gas flow in a microchannel with a ratchet surface. Physical Review E, 95 (2). 023113. ISSN 2470-0053
Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. and Czigány, Tibor (2017) Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites. Composites Part B: Engineering, 111. pp. 348-356. ISSN 1359-8368
Ioannou, Nikolaos and Liu, Haihui and Oliveira, Mónica S. N. and Zhang, Yonghao (2017) Droplet dynamics of Newtonian and inelastic non-Newtonian fluids in confinement. Micromachines, 8 (2). ISSN 2072-666X
Mogavero, Alessandro; (2017) Configurational optimizer of combined cycle propulsion using genetic programming. In: 2016 IEEE Symposium Series on Computational Intelligence, (SSCI). Institute of Electrical and Electronics Engineers Inc., GRC. ISBN 9781509042401
Vasile, Massimiliano and Ricciardi, Lorenzo; (2017) A direct memetic approach to the solution of multi-objective optimal control problems. In: 2016 IEEE Symposium Series on Computational Intelligence, SSCI 2016. Institute of Electrical and Electronics Engineers Inc., GRC. ISBN 9781509042401
Vroom, Aram and Di Carlo, Marilena and Martin, Juan Manuel Romero and Vasile, Massimiliano; (2017) Optimal trajectory planning for multiple asteroid tour mission by means of an incremental bio-inspired tree search algorithm. In: 2016 IEEE Symposium Series on Computational Intelligence (SSCI). IEEE, GRC. ISBN 9781509042401
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica; Co, Albert, ed. (2017) Thermal Marangoni migration of droplets in an Oldroyd-B fluid under creeping flow conditions. In: The Society of Rheology. University of Maine, Orono, ME..
Silva, Andreia F. and Alves, Manuel A. and Oliveira, Monica S. N. (2017) Rheological behaviour of vitreous humour. Rheologica Acta. pp. 1-21. ISSN 1435-1528
Walsh, Angélica and Cóstola, Daniel and Labaki1, Lucila Chebel (2017) Review of methods for climatic zoning for building energy efficiency programs. Building and Environment, 112. pp. 337-350. ISSN 0360-1323
Feng, Jinglang and Noomen, Ron and Hou, Xiyun and Visser, Pieter and Yuan, Jianping (2017) 1:1 Ground track resonance in a uniformly rotating 4th degree and order gravitational field. Celestial Mechanics and Dynamical Astronomy, 127 (1). pp. 67-93. ISSN 0923-2958
Liu, Haihu and Wu, Lei and Ba, Yan and Xi, Guang (2017) A lattice Boltzmann method for axisymmetric thermocapillary flows. International Journal of Heat and Mass Transfer, 104. pp. 337-350. ISSN 0017-9310
Rahimi, S. and Wynne, B. P. and Baker, T. N. (2017) Development of microstructure and crystallographic texture in a double-sided friction stir welded microalloyed steel. Metallurgical and Materials Transactions A, 48 (1). pp. 362-378. ISSN 1073-5623
Yang, Liu and Wang, Zhoujie and Dempster, William and Yu, Xinhai and Tu, Shan-Tung (2017) Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions. Journal of Loss Prevention in the Process Industries, 45. pp. 133-146. ISSN 0950-4230
MacKenzie, Alasdair (2017) A hybrid slurry CFD model : Euler-Euler to Euler-Lagrange (in development). In: 5th United Kingdom & Éire OpenFOAM® User Meeting, 2017-01-16 - 2017-01-17, University College Dublin.
Ben Sassi, Mokhtar and Kaddeche, Slim and Lappa, Marcello and Millet, Séverine and Henry, Daniel and Ben Hadid, Hamda (2017) On the effect of thermodiffusion on solute segregation during the growth of semiconductor materials by the vertical Bridgman method. Journal of Crystal Growth, 458. pp. 154-165. ISSN 0022-0248
Calautit, John Kaiser and Hughes, Ben Richard and Nasir, Diana SNM (2017) Climatic analysis of a passive cooling technology for the built environment in hot countries. Applied Energy, 186 (Part 3). pp. 321-335. ISSN 0306-2619
Elharidi, Aly M. and Tuohy, Paul G. and Teamah, Mohamed A. and Hanafy, Ahmed A. (2017) Energy and indoor environmental performance of typical Egyptian offices : survey, baseline model and uncertainties. Energy and Buildings, 135. 367–384. ISSN 0378-7788
Nasir, Diana S.N.M. and Hughes, Ben Richard and Calautit, John Kaiser (2017) A CFD analysis of several design parameters of a road pavement solar collector (RPSC) for urban application. Applied Energy, 186 (Part 3). pp. 436-449. ISSN 0306-2619
Bonetti, Valentina and Kokogiannakis, Georgios (2017) Dynamic exergy analysis for the thermal storage optimisation of the building envelope. Energies, 10 (1). 95. ISSN 1996-1073
Zhang, Jiaying and McInnes, Colin R and Xu, Ming (2017) Reconfiguration of a smart surface using heteroclinic connections. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. pp. 1-24. ISSN 1471-2962
Toso, Federico and Maddock, Christie (2017) Initial guess generation strategies for spaceplane trajectory optimisation. Transactions of the Japan Society for Aeronautical and Space Sciences. ISSN 0549-3811 (In Press)
Ritos, Konstantinos and Kokkinakis, Ioannis W. and Drikakis, Dimitris and Spottswood, Stephen M.; (2017) Thermoacoustic effects in high-speed compressible transitional and turbulent boundary layers. In: 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104473
Afsar, Mohammed and Leib, Stewart and Bozak, Richard (2017) Effect of de-correlating turbulence on the low frequency decay of jet-surface interaction noise in sub-sonic unheated air jets using a CFD-based approach. Journal of Sound and Vibration, 386. 177–207. ISSN 0022-460X
Mohamed, H. and Lazaridis, P. and Upton, D. and Khan, U. and Saeed, B. and Jaber, A. and Zhang, Y. and Mather, P. and Vieira, M. F. Q. and Barlee, K. and Atkinson, D. S. W. and Glover, I. A.; (2017) Partial discharge detection using software defined radio. In: 2016 International Conference for Students on Applied Engineering (ICSAE). IEEE, GBR, pp. 373-376. ISBN 9781467390538
Gao, Song and Habashi, Wagdi G. and Fossati, Marco and Isola, Dario and Baruzzi, Guido S.; (2017) Finite-element formulation of a Jacobian-free solver for supersonic viscous flows on hybrid grids. In: 55th AIAA Aerospace Sciences Meeting. AIAA SciTech Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA, pp. 1-28. ISBN 9781624104473
Beesley, Ross and Chen, Haofeng and Hughes, Martin (2017) A novel simulation for the design of a low cycle fatigue experimental testing programme. Computers and Structures, 178. 105–118. ISSN 0045-7949
Mehta, Piyush M. and Kubicek, Martin and Minisci, Edmondo and Vasile, Massimiliano (2017) Sensitivity analysis and probabilistic re-entry modeling for debris using high dimensional model representation based uncertainty treatment. Advances in Space Research, 59 (1). 193–211. ISSN 0273-1177
Wu, Lei and Zhang, Yong Hao and Li, Zhi Hui (2017) Computable model on the collision integral of Boltzmann equation and application to rarefied aerodynamics. Scientia Sinica: Physica, Mechanica et Astronomica, 47 (7). 070004. ISSN 2095-9478
2016
Afsar, M. Z. and Sescu, A. and Sassanis, V. and Towne, A. and Brès, G. A. and Lele, S. K.; (2016) Prediction of supersonic jet noise using non-parallel flow asymptotics and LES data within Goldstein’s acoustic analogy. In: Studying Turbulence using Numerical Simulation Databases - XVI. Stanford University, Center for Turbulence Research, Stanford, California.
Gebreslassie, Mulualem G. and Sanchez, Stephanie O. and Tabor, Gavin R. and Belmont, Michael R. and Bruce, Tom and Payne, Gregory and Moon, Ian (2016) Experimental and CFD analysis of the wake characteristics of tidal turbines. International Journal of Marine Energy, 16. pp. 209-219. ISSN 2214-1669
Nevalainen, T.M. and Johnstone, C.M. and Grant, A.D. (2016) A sensitivity analysis on tidal stream turbine loads caused by operational, geometric design and inflow parameters. International Journal of Marine Energy, 16. pp. 51-64. ISSN 2214-1669
Clark, Ruaridh and Punzo, Giuliano and Macdonald, Malcolm; (2016) Consensus speed optimisation with finite leadership perturbation in k-nearest neighbour networks. In: 2016 IEEE 55th Conference on Decision and Control (CDC). IEEE, USA. ISBN 978-1-5090-1837-6
Thiry, Nicolas and Vasile, Massimiliano (2016) Theoretical peak performance and optical constraints for the deflection of an S-type asteroid with a continuous wave laser. Advances in Space Research, 59 (5). pp. 1353-1367. ISSN 0273-1177
Benghalia, Gladys and Rahimi, Salah and Wood, James; Holden, Thomas M. and Muránsky, Ondrej and Edwards, Lyndon, eds. (2016) Measurements of surface and near-surface residual stress in 4330 low alloy carbon steel weld clad components. In: Residual Stresses 2016. Materials Research Forum, AUS, pp. 259-264. ISBN 978-1-94529116-6
Lappa, Marcello (2016) On the onset of multi-wave patterns in laterally heated floating zones for slightly supercritical conditions. Physics of Fluids, 28 (12). 124105. ISSN 1070-6631
Blue, Robert and Thomson, Neil and Taylor, Stewart J. and Fletcher, Ashleigh J. and Skabara, Peter J. and Uttamchandani, Deepak (2016) Miniature nitro and peroxide vapor sensors using nanoporous thin films. IEEE Sensors Journal, 16 (24). pp. 8767-8774. ISSN 1530-437X
Di Carlo, Marilena and Barbera, Daniele and Conte, Davide and Mintus, Agata and Romero Martin, Juan Manuel and Budzyn, Dorota and Teofili, Lorenzo and Grys, Szymon and Jamieson, Jonathan and Hay, Craig and Lund, Thomas and Ikeda, Nauromi and Volpe, Renato and Fleming, Douglas (2016) Human exploration of cis-lunar space via assets tele-operated from EML2 (HECATE). Acta Futura, 2016 (10). pp. 75-89.
Casseau, Vincent and Espinoza, Daniel E. R. and Scanlon, Thomas J. and Brown, Richard E. (2016) A two-temperature open-source CFD model for hypersonic reacting flows, part two : multi-dimensional analysis. Aerospace, 3 (4). ISSN 2052-451X
Maddock, Christie Alisa and Minisci, Edmondo; (2016) Spaceplane trajectory optimisation with evolutionary-based initialisation. In: 2016 IEEE Symposium Series on Computational Intelligence (SSCI). IEEE, GRC. ISBN 9781509042401
Gorash, Yevgen and Bickley, Alan and Gozalo, Francisco (2016) Design optimisation of swellable elastomeric seals using advanced material modelling and FEM simulations. In: IOM3 - Innovations in Rubber Design, 2016-12-07 - 2016-12-08, The Royal Aeronautical Society, 4 Hamilton Place.
Anwar, Ali A. and Ritos, Konstantinos and Gorash, Yevgen and Dempster, William and Nash, David (2016) Microflow leakage through the clearance of a metal-metal seal. In: ASME Pressure Vessels & Piping Conference 2016, 2016-07-17 - 2016-07-21, Hyatt Regency Vancouver.
Cockroft, J. and Cowie, A. and Samuel, A. and Strachan, P. (2016) Potential energy savings achievable by zoned control of individual rooms in UK housing compared to standard central heating controls. Energy and Buildings. ISSN 0378-7788
Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites. Composites Part A: Applied Science and Manufacturing, 91. pp. 436-447. ISSN 1359-835X
Nejat, Payam and Calautit, John Kaiser and Majid, Muhd Zaimi Abd and Hughes, Ben Richard and Jomehzadeh, Fatemeh (2016) Data on the natural ventilation performance of windcatcher with anti-short-circuit device (ASCD). Data in Brief, 9. pp. 252-256. ISSN 2352-3409
Nejat, Payam and Calautit, John Kaiser and Muhd, Muhd Zaimi and Hughes, Ben Richard and Zeynali, Iman and Jomehzadeh, Fatemeh (2016) Wind tunnel and numerical data on the ventilation performance of windcatcher with wing wall. Data in Brief, 9. pp. 448-452. ISSN 2352-3409
Adams, Steven and Schnittger, Sorcha and Kockar, Ivana and Kelly, Nicolas and Xu, Han and Monari, Filippo and Edrah, Mohamed and Zhang, Jixing and Bell, George (2016) Impact of Electrolysers on the Network. Scottish & Southern Electricity Networks, Perth.
Yáñez-González, Álvaro and Ruiz-Trejo, Enrique and Van Wachem, Berend and Skinner, Stephen and Beyrau, Frank and Heyes, Andrew (2016) Development of an optical thermal history coating sensor based on the oxidation of a divalent rare earth ion phosphor. Measurement Science and Technology, 27 (11). 115103. ISSN 0957-0233
Thomason, Jim and Yang, L. and Jenkins, P. and Sáez, E. and Nagel, U. (2016) ReCoVeR: Regenerating the value and performance of glass fibres thermally recycled from end-of-life and waste GRP. In: 2nd International Composites Congress, 2010-11-28 - 2016-11-29, CCD Congress Center. (Unpublished)
Kim, J. and Clarke, J. A. and Allison, J. and Ahn, J. and Chung, D. (2016) An e-Service delivery platform for building indoor environment and energy performance assessment. In: 3rd Asia Conference of International Building Performance Simulation Association, 2016-11-27 - 2016-11-29, Phoenix Island.
Clark, Ruaridh A. and Punzo, Giuliano and MacLeod, Charles N. and Dobie, Gordon and Summan, Rahul and Bolton, Gary and Pierce, Stephen G. and Macdonald, Malcolm (2016) Autonomous and scalable control for remote inspection with multiple aerial vehicles. Robotics and Autonomous Systems, 87. pp. 258-268. ISSN 0921-8890
Bonetti, V. and Robazza, P. (2016) The irreversible evolution of buildings. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 167-175. ISSN 1755-7445
Ricciardi, Lorenzo A. and Vasile, Massimiliano and Maddock, Christie; (2016) Global solution of multi-objective optimal control problems with multi agent collaborative search and direct finite elements transcription. In: 2016 IEEE Congress on Evolutionary Computation, (CEC). IEEE, CAN, pp. 869-876. ISBN 9781509006236
Casseau, V. and Scanlon, T. J. and John, B. and Emerson, D. R. and Brown, R. E.; Struchtrup, Henning and Ketsdever, Andrew, eds. (2016) Hypersonic simulations using open-source CFD and DSMC solvers. In: Proceedings of the 30th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings, 1786 . American Institute of Physics, CAN. ISBN 9780735414488
Polikarpov, Alexey and Ho, Minh Tuan and Graur, Irina (2016) Unsteady heat transfer in a gas mixture. MATEC Web of Conferences, 84. 00031. ISSN 2261-236X
Espinoza, Daniel and Casseau, Vincent and Scanlon, Thomas and Brown, Richard; Struchtrup, Henning and Ketsdever, Andrew, eds. (2016) An open-source hybrid CFD-DSMC solver for high speed flows. In: Proceedings of the 30th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings, 1786 . American Institute of Physics, CAN. ISBN 9780735414488
Wu, Lei and Reese, Jason M. and Zhang, Yonghao; Ketsdever, Andrew and Struchtrup, Henning, eds. (2016) Temperature retrieval error in Rayleigh-Brillouin scattering using Tenti’s S6 kinetic model. In: 30th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings, 1786 . AIP Publishing, CAN. ISBN 9780735414488
Wu, Lei (2016) Sound propagation through a rarefied gas in rectangular channels. Physical Review E, 94. 053110. ISSN 2470-0053
Fossati, Marco (2016) Preface to the Special Issue on : "27th International Conference on Parallel Computational Fluid Dynamics". International Journal of Computational Fluid Dynamics, 30 (6). p. 387. ISSN 1029-0257
Haeri, S. and Wang, Y. and Ghita, O. and Sun, J. (2016) Discrete element simulation and experimental study of powder spreading process in additive manufacturing. Powder Technology, 306. 45–54. ISSN 0032-5910
Sriboon, Tongpong and Sangsritorn, Supakorn and Tuohy, Paul Gerard and Sharma, Mahesh Kumar and Leeprechanon, Nopbhorn; (2016) Simulation and analysis of renewable energy resource integration for electric vehicle charging stations in Thailand. In: 2016 International Conference on Cogeneration, Small Power Plants and District Energy (ICUE). IEEE, THA. ISBN 9789748257921
Gong, Yue-Jiao and Li, Jing-Jing and Zhou, Yicong and Li, Yun and Chung, Henry Shu-Hung and Shi, Yu-Hui and Zhang, Jun (2016) Genetic learning particle swarm optimization. IEEE Transactions on Cybernetics, 46 (10). pp. 2277-2290. 7271066. ISSN 2168-2275
Polikarpov, A.Ph. and Ho, Minh Tuan and Graur, I. (2016) Transient heat transfer in a rarefied binary gas mixture confined between parallel plates due to a sudden small change of wall temperatures. International Journal of Heat and Mass Transfer, 101. pp. 1292-1303. ISSN 0017-9310
Rasool, Ghulam and Johnstone, Cameron and Stack, Margaret M.; (2016) Tribology of tidal turbine blades : impact angle effects on erosion of polymeric coatings in sea water conditions. In: Proceedings of 3rd Asian Wave and Tidal Energy Conference (AWTEC 2016). Asian Wave and Tidal Energy Conference (AWTEC), SGP, pp. 1016-1033. ISBN 9789811107825
Anwar, Ali and Gorash, Yevgen and Dempster, William and Nash, David (2016) Deformed gap space using macro-micro FEA model and transferred into a CFD model. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). 61264. ISSN 1617-7061
Gao, Song and Habashi, Wagdi G. and Isola, Dario and Baruzzi, Guido S. and Fossati, Marco (2016) A Jacobian-free edged-based Galerkin formulation for compressible flows. Computers and Fluids. ISSN 0045-7930
McIntyre, Stuart and Fawcett, Travis and Dickinson, Thomas and Maddock, Christie Alisa and Mogavero, Alessandro and Ricciardi, Lorenzo and Toso, Federico and West, Michael and Kontis, Kostantinos and Lo, Kin Hing and Rengarajan, Sriram and Evans, David and Milne, Andy and Feast, Simon (2016) How to launch small payloads? Evaluation of current and future small payload launch systems. In: 14th Reinventing Space Conference, 2016-10-24 - 2016-10-27, Royal Society.
McIntyre, Stuart and Fawcett, Travis and Dickinson, Thomas and West, Michael and Maddock, Christie Alisa and Mogavero, Alessandro and Ricciardi, Lorenzo and Toso, Federico and Kontis, Konstantinos and Lo, Kin Hing and Rengarajan, Sriram and Evans, David and Milne, Andy and Feast, Simon (2016) A commercially driven design approach to UK future small payload launch systems. In: 14th Reinventing Space Conference, 2016-10-24 - 2016-10-27, Royal Society.
Zhang, Jiaying and Li, Xuan; (2016) Optimal configuration of sensors in active vibration control. In: Proceedings of the International Academic Conference for Graduates. NanJing University of Aeronautics and Astronautics Graduate School, CHN.
Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2016) Influence of material data input on accuracy of fatigue assessments for beam weldments. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). pp. 127-128. 90857. ISSN 1617-7061 (Unpublished)
Tuohy, Paul Gerard; Mendonça, Marcelo Rodrigues and Rodrigues de Oliveira, Adriano, eds. (2016) Local Energy Perspectives on Scotland and Brazil. In: Annals of the IV Workshop Production and Appropriation of New Energy Sources. Universidade Federal de Goiás, BRA, pp. 295-305. ISBN 9788549500878
Ordonez Sanchez, Stephanie and Porter, Kate and Frost, Carwyn and Allmark, Matthew and Johnstone, Cameron and O'Doherty, Tim (2016) Effects of wave-current interactions on the performance of tidal stream turbines. In: 3rd Asian Wave and Tidal Energy Conference, 2016-10-24 - 2016-10-28, Marina Bay Sands.
Porter, Kate and Ordonez-Sanchez, Stephanie and Nevalainen, Thomas and FU, Song and Johnstone, Cameron (2016) Comparative study of numerical modelling techniques to estimate tidal turbine blade loads. In: 3rd Asian Wave and Tidal Energy Conference, 2016-10-24 - 2016-10-28, Marina Bay Sands.
Casseau, Vincent and Palharini, Rodrigo . and Scanlon, Thomas J. and Brown, Richard E. (2016) A two-temperature open-source CFD model for hypersonic reacting flows, part one : zero-dimensional analysis. Aerospace, 3 (4). ISSN 2052-451X
Lappa, Marcello (2016) Numerical study into the morphology and formation mechanisms of three dimensional particle structures in vibrated cylindrical cavities with various heating conditions. Physical Review Fluids, 1 (6). 064203.
Turner, Jacob M. and Haeri, Sina and Kim, Jae Wook (2016) Improving the boundary efficiency of a compact finite difference scheme through optimising its composite template. Computers and Fluids, 138. pp. 9-25. ISSN 0045-7930
Yáñez-González, Álvaro and van Wachem, Berend and Skinner, Stephen and Beyrau, Frank and Heyes, Andrew (2016) On the kinetics of thermal oxidation of the thermographic phosphor BaMgAL10O17:Eu. Materials and Design, 108. pp. 145-150. ISSN 0264-1275
Garcia, D. and Liśkiewicz, G. (2016) Stable or not stable? Recognizing surge based on the pressure signal. Transactions of the Institute of Fluid-Flow Machinery, 2016 (133). pp. 55-68. ISSN 0079-3205
Yousefi, A. M. and Lim, J. B.P. and Uzzaman, A. and Clifton, G. C. and Young, B. (2016) Numerical study of web crippling strength in cold-formed austenitic stainless steel lipped channels with web openings subjected to interior-two-flange loading. In: 11th Pacific Structural Steel Conference, 2016-10-29 - 2016-10-31, Crowne Plaza Shanghai.
Yousefi, A.M. and Lim, J.B.P. and Uzzaman, A. and Lian, Y. and Clifton, G.C. and Young, B. (2016) Web crippling design of cold-formed duplex stainless steel lipped channel-sections with web openings under end-one-flange loading condition. In: 11th Pacific Structural Steel Conference, 2016-10-29 - 2016-10-31, Crowne Plaza Shanghai.
Jalalvand, Meisam and Czél, Gergely and Fuller, Jonathan D. and Wisnom, Michael R. and Canal, Luis P. and González, Carlos D. and LLorca, Javier (2016) Energy dissipation during delamination in composite materials – an experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip. Composites Science and Technology, 134. pp. 115-124. ISSN 0266-3538
Liu, Haihu and Wu, Lei and Ba, Yan and Xi, Guang and Zhang, Yonghao (2016) A lattice Boltzmann method for axisymmetric multicomponent flows with high viscosity ratio. Journal of Computational Physics. ISSN 0021-9991
Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2016) Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations. Thin-Walled Structures, 107. pp. 489-501. ISSN 0263-8231
Lian, Ying and Uzzaman, Md Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2016) Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part I: Tests and finite element analysis. Thin-Walled Structures, 107. pp. 443-452. ISSN 0263-8231
O'Connor, Dominic and Calautit, John Kaiser and Hughes, Ben Richard (2016) A novel design of a desiccant rotary wheel for passive ventilation applications. Applied Energy, 179. pp. 99-109. ISSN 0306-2619
Garner, Robert J. and Toso, Federico and Maddock, Christie Alisa (2016) Comparison of the emissions of current expendable launch vehicles and future spaceplanes. In: 67th International Astronautical Congress, 2016-09-26 - 2016-09-30, Expo Guadalajara.
Goodarzi, M. Saeed and Hosseini-Toudeshky, Hossein and Jalalvand, Meisam; (2016) Shear-mode viscoelastic damage formulation interface element. In: Advances in Fracture and Damage Mechanics XV. Key Engineering Materials, 713 . Trans Tech Publications Ltd, ESP, pp. 167-170. ISBN 9783038357162
Gracie-Orr, Katie and Nevalainen, Thomas M. and Johnstone, Cameron M. and Murray, Robynne E. and Doman, Darrel A. and Pegg, Michael J. (2016) Development and initial application of a blade design methodology for overspeed power-regulated tidal turbines. International Journal of Marine Energy, 15. pp. 140-155. ISSN 2214-1669
Kokkinakis, Ioannis W. and Drikakis, Dimitris; (2016) Near-wall behaviour of implicit large eddy simulations. In: ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens, GRC, pp. 1032-1045. ISBN 9786188284401
Toso, Federico and Maddock, Christie Alisa (2016) Deployed payload analysis for a single stage to orbit spaceplane. In: 67th International Astronautical Congress, 2016-09-26 - 2016-09-30, Expo Guadalajara.
Wisnom, M.R. and Czél, G. and Swolfs, Y. and Jalalvand, M. and Gorbatikh, L. and Verpoest, I. (2016) Hybrid effects in thin ply carbon/glass unidirectional laminates : accurate experimental determination and prediction. Composites Part A: Applied Science and Manufacturing, 88. pp. 131-139. ISSN 1359-835X
Yousefi, Amir M and Lim, James BP and Uzzaman, Asraf and Lian, Ying and Clifton, G. Charles and Young, Ben (2016) Design of cold-formed stainless steel lipped channel sections with web openings subjected to web crippling under end-one-flange loading condition. Advances in Structural Engineering. ISSN 2048-4011
Absil, Carlos Ortega and Serra, Romain and Riccardi, Annalisa and Vasile, Massimiliano; (2016) De-orbiting and re-entry analysis with generalised intrusive polynomial expansions. In: 67th International Astronautical Congress. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), MEX.
Thiry, Nicolas and Vasile, Massimiliano; (2016) Statistical multicriteria evaluation of asteroid deflection methods. In: 67th International Astronautical Congress. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), MEX.
Kerr, Emma and Macdonald, Malcolm; (2016) General perturbations method for orbit lifetime analysis incorporating non-spherically-symmetrical atmospheres. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459
Zimoń, M.J. and Reese, J.M. and Emerson, D.R. (2016) A novel coupling of noise reduction algorithms for particle flow simulations. Journal of Computational Physics, 321. pp. 169-190. ISSN 0021-9991
Agius Anastasi, Anthea and Ritos, Konstantinos and Cassar, Glenn and Borg, Matthew K. (2016) Mechanical properties of pristine and nanoporous graphene. Molecular Simulation. pp. 1-10. ISSN 1029-0435
Allison, John (2016) Robust multi-objective control of hybrid renewable microgeneration systems with energy storage. Applied Thermal Engineering, 114. pp. 1498-1506. ISSN 1359-4311
Carlo, Marilena Di and Ricciardi, Lorenzo and Vasile, Massimiliano; (2016) Multi-objective optimisation of constellation deployment using low-thrust propulsion. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459
Conte, Davide and Budzyń, Dorota and Burgoyne, Hayden and Di Carlo, Marilena and Fries, Dan and Grulich, Maria and Heizmann, Sören and Jethani, Henna and Lapôtre, Mathieu and Roos, Tobias and Serrano Castillo, Encarnación and Scherrmann, Marcel and Vieceli, Rhiannon and Wilson, Lee and Wynard, Christopher; (2016) Innovative Mars Global International Exploration (IMaGInE) mission. In: AIAA Space 2016. AIAA Space Forum, 2 . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781510831957
Di Carlo, Marilena and Vasile, Massimiliano; (2016) Low-thrust tour of the main belt asteroids. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459
McGrath, Ciara N. and Macdonald, Malcolm; (2016) Analytical low-thrust satellite maneuvers for rapid ground target revisit. In: AIAA SPACE 2016. AIAA, Reston, VA.. ISBN 9781624104275
Ricciardi, Lorenzo A. and Vasile, Massimiliano and Toso, Federico and Maddock, Christie Alisa; (2016) Multi-objective optimal control of ascent trajectories for launch vehicles. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459
Vasile, Massimiliano and Minisci, Edmondo and Serra, Romain and Beck, James and Holbrough, Ian; (2016) Analysis of the de-orbiting and re-entry of space objects with high area to mass ratio. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459
Hart, E. and Keegan, M. and McMillan, D. (2016) A lookup table approach to determining wind turbine operational fatigue loading from wind field measurements. In: ASRANet International Conference on Offshore Renewable Energy, 2016-09-12 - 2016-09-14.
Vasile, Massimiliano and Ricciardi, Lorenzo; Schütze, Oliver and Trujillo, Leonardo and Legrand, Pierrick and Maldonado, Yazmin, eds. (2016) Multi agent collaborative search. In: NEO 2015. Studies in Computational Intelligence, 663 . Springer International Publishing AG, Switzerland, pp. 223-252. ISBN 9783319440026
Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C. (2016) Residual stress generations in brazed tungsten dissimilar joints. IEEE Transactions on Plasma Science, 44 (9). pp. 1-6. ISSN 1939-9375
Giugliano, Dario and Barbera, Daniele and Chen, Haofeng (2016) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids. EJMSOL_3346. ISSN 0997-7538
Gorash, Yevgen and Dempster, William and Nicholls, William D. and Hamilton, Robert and Anwar, Ali A. (2016) Study of mechanical aspects of leak tightness in a pressure relief valve using advanced FE-analysis. Journal of Loss Prevention in the Process Industries, 43. pp. 61-74. ISSN 0950-4230
Castaño, Adiel and Fernández-Navarro, Francisco and Riccardi, Annalisa and Hervás-Martínez, Cesar (2016) Enforcement of the principal component analysis - extreme learning machine algorithm by linear discriminant analysis. Neural Computing and Applications, 27 (6). pp. 1749-1760. ISSN 0941-0643
Uzzaman, Asraf and Wrzesien, Andrzej M. and Lim, James B.P. and Hamilton, Robert and Nash, David (2016) Design of top-hat purlins for cold-formed steel portal frames. Structures, 7. pp. 113-125. ISSN 2352-0124
Fu, Song and Johnstone, Cameron and Clarke, Joe (2016) Evaluating passive structural control of tidal turbines. In: 3rd Asian Wave and Tidal Energy Conference, 2016-10-24 - 2016-10-28, Marina Bay Sands. (In Press)
Soleimani, Zohreh and Calautit, John Kaiser and Hughes, Ben Richard (2016) Computational analysis of natural ventilation flows in geodesic dome building in hot climates. Computation, 4 (3). pp. 1-22. 31. ISSN 1866-9964
Nejat, Payam and Calautit, John Kaiser and Majid, Muhd Zaimi Abd and Hughes, Ben Richard and Jomehzadeh, Fatemeh (2016) Anti-short-circuit device : a new solution for short-circuiting in windcatcher and improvement of natural ventilation performance. Building and Environment, 105. pp. 24-39. ISSN 0360-1323
Nejat, Payam and Calautit, John Kaiser and Majid, Muhd Zaimi Abd and Hughes, Ben Richard and Zeynali, Iman and Jomehzadeh, Fatemeh (2016) Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher. Energy and Buildings, 126. pp. 287-300. ISSN 0378-7788
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and Harvey, David (2016) Evaluation of the synergistic erosion-corrosion behaviour of HVOF thermal spray coatings. Surface and Coatings Technology, 299. pp. 37-48. ISSN 0257-8972
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and McNutt, Philip and Iqbal, Naveed (2016) Cold gas dynamic spraying of metal matrix composite coatings with subsequent friction stir processing. In: 11th International Symposium on Friction Stir Welding, 2016-05-17 - 2016-05-19, The Granta Centre, TWI Ltd, Granta Park, Great Abington.
Burn, D. T. and Harper, L. T. and Johnson, M. and Warrior, N. A. and Nagel, U. and Yang, L. and Thomason, J. (2016) The usability of recycled carbon fibres in short fibre thermoplastics : interfacial properties. Journal of Materials Science, 51 (16). pp. 7699-7715. ISSN 1573-4803
Caboni, Marco and Campobasso, M. Sergio and Minisci, Edmondo (2016) Wind turbine design optimization under environmental uncertainty. Journal of Engineering for Gas Turbines and Power, 138 (8). 082601. ISSN 0742-4795
Flett, Graeme and Kelly, Nick (2016) An occupant-differentiated, higher-order Markov Chain method for prediction of domestic occupancy. Energy and Buildings, 125. pp. 219-230. ISSN 0378-7788
Papanikolaou, Michail and Frank, Michael and Drikakis, Dimitris (2016) Nanoflow over a fractal surface. Physics of Fluids, 28 (8). 082001. ISSN 1070-6631
Thomason, J. L. and Nagel, U. and Yang, L. and Sáez, E. (2016) Regenerating the strength of thermally recycled glass fibres using hot sodium hydroxide. Composites Part A: Applied Science and Manufacturing, 87. pp. 220-227. ISSN 1359-835X
Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czel, Gergely and Wisnom, Michael R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86. pp. 66-76. ISSN 1359-835X
Su, Dongxu and Zheng, Rencheng and Nakano, Kimihiko and Cartmell, Matthew P (2016) Stabilisation of the high energy orbit for a nonlinear energy harvester with variable damping. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (12). pp. 2003-2012. ISSN 0954-4062
Zografos, K. and Pimenta, F. and Alves, M. A. and Oliveira, M. S. N. (2016) Microfluidic converging/diverging channels optimised for homogeneous extensional deformation. Biomicrofluidics, 10 (4). 043508. ISSN 1932-1058
Heiligers, Jeannette and Macdonald, Malcolm and S. Parker, Jeffrey (2016) Extension of Earth-Moon libration point orbits with solar sail propulsion. Astrophysics and Space Science, 361. 241. ISSN 0004-640X
Yousefi, Amir M. and Lim, James B.P. and Uzzaman, Asraf and Lian, Ying and Clifton, G. Charles and Young, Ben (2016) Web crippling strength of cold-formed duplex stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition. In: 23rd International Specialty Conference on Cold-Formed Steel Structures, 2016-11-09 - 2016-11-10, St. Louis. (In Press)
Wheel, Marcus (2016) On energy release rates in heterogeneous composite laminates. Procedia Structural Integrity, 2. pp. 174-181. ISSN 2452-3216
Zhan, Zhao and Habashi, Wagdi G. and Fossati, Marco (2016) Real-time regional jet comprehensive aeroicing analysis via reduced order modeling. AIAA Journal, 54 (12). pp. 3787-3802. ISSN 0001-1452
Dai, Yanwei and Liu, Yinghua and Chen, Haofeng; (2016) Influences of T-stress on constraint effect in mismatched modified boundary layer model for creep crack. In: ASME 2016 Pressure Vessels and Piping Conference. ASME, CAN. ISBN 9780791850398
Ojo, Anthony O. and Fond, Benoit and Abram, Christopher and van Wachem, Berend G. M. and Heyes, Andrew L. and Beyrau, Frank; (2016) Development of the thermographic laser doppler velocimetry technique. In: Proceedings of the 18th International Symposium On Application of Laser And Imaging Techniques To Fluid Mechanics. Lisbon Simposia, Lisbon, Portugal. ISBN 9789899877788
Docherty, Stephanie Y. and Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2016) Coupling heterogeneous continuum-particle fields to simulate non-isothermal microscale gas flows. International Journal of Heat and Mass Transfer, 98. pp. 712-727. ISSN 0017-9310
Rakaric, Zvonko and Kovacic, Ivana and Cartmell, Matthew (2016) On the design of external excitations in order to make nonlinear oscillators respond as free oscillators of the same or different type. International Journal of Non-Linear Mechanics. ISSN 0020-7462
Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen (2016) Lessons from HILDA : a large-scale experimental investigation of steel friction stir welding for shipbuilding. In: 11th International Symposium on Friction Stir Welding, 2016-05-17 - 2016-05-19, The Granta Centre, TWI Ltd, Granta Park, Great Abington.
Lappa, Marcello (2016) On the nature, formation and diversity of particulate coherent structures in microgravity conditions and their relevance to materials science and problems of astrophysical interest. Geophysical and Astrophysical Fluid Dynamics, 110 (4). pp. 348-386. ISSN 1029-0419
Calautit, John Kaiser and Hughes, Ben Richard (2016) CFD and experimental data of closed-loop wind tunnel flow. Data in Brief, 7. pp. 216-220. ISSN 2352-3409
Kim, Jae Min and Oh, Jin Seok (2016) Hybrid power management system using fuel cells and batteries. Journal of Information and Communication Convergence Engineering, 14 (2). pp. 122-128. ISSN 2234-8883
Minty, Ross F. and Thomason, James L. and Yang, Liu (2016) The role of the epoxy resin : curing agent ratio on composite interfacial strength and thermal performance. In: European Conference on Composite Materials - ECCM 17, 2016-06-26 - 2016-06-30.
Yang, Liu and Thomason, James and Nagel, Ulf and Minty, Ross and Cruz, Camilo and De Monte, Matthias (2016) Investigation of the effect of engine fuels on fibre-matrix adhesion in glass fibre reinforced polyamide. In: 17th European Conference on Composite Materials, 2016-06-26 - 2016-06-30.
Yousefi, Amir M. and Lim, James B.P. and Uzzaman, Asraf and Lian, Ying and Clifton, G. Charles and Young, Ben (2016) Web crippling strength of cold-formed stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition. Steel and Composite Structures, 21 (3). pp. 629-659. ISSN 1229-9367
Jenkins, Peter G. and Stafford, Mhari R. and Thomason, James L. (2016) Investigation of the effect of hot water and water vapour treatments on the strength of thermally conditioned E-glass fibres. In: The 17th European Conference on Composite Materials (ECCM17), 2016-06-26 - 2016-06-30, Internationales Congress Center München.
MacKenzie, Alasdair and Lopez, Alejandro and Stickland, Matthew and Dempster, William (2016) A combined Euler-Euler Euler-Lagrange slurry model. In: 11th OpenFOAM® Workshop, 2016-06-26 - 2016-06-30.
Thiry, Nicolas and Vasile, Massimiliano and Monchieri, Emanuele; (2016) Mission and system design for the manipulation of PHOs with space-borne lasers. In: Aerospace Conference, 2016 IEEE. IEEE, USA. ISBN 9781467376761
Vetrisano, Massimo and Cano, Juan L. and Thiry, Nicolas and Tardioli, Chiara and Vasile, Massimiliano; (2016) Optimal control of a space-borne laser system for a 100 m asteroid deflection under uncertainties. In: Aerospace Conference, 2016 IEEE. IEEE, USA. ISBN 9781467376761
Bashir, S. and Yang, L. and Anderson, R. and Basri, N. B. and Saez Rodriguez, E. and Liggat, J. J. and Thomason, J. (2016) A cost-effective chemical approach to retaining and regenerating the strength of thermally recycled glass fibre. In: The 17th European Conference on Composite Materials (ECCM17), 2016-06-26 - 2016-06-30, Internationales Congress Center München.
Thomason, James L. and Yang, Liu and Saez, Eduardo L. and Nagel, Ulf (2016) Recover : regenerating the strength and value of thermally recycled glass fibres. In: European Conference on Composite Materials - ECCM 17, 2016-06-26 - 2016-06-30.
Webley, Andrew and Yang, Liu and Nash, David (2016) Simulation of the heat transfer through fibrous insulation. In: 17th European Conference on Composite Materials, 2016-06-26 - 2016-06-30.
Thomason, J L and Yang, L and Bryce, D and Minty, R (2016) An exploration of the relationship of chemical and physical parameters in the micromechanical characterisation of the apparent interfacial strength in glass fibre epoxy systems. IOP Conference Series: Materials Science and Engineering, 139. pp. 1-8. ISSN 1757-899X (In Press)
Cartmell, Matthew P. (2016) Editor's note. Journal of Sound and Vibration, 371. p. 1. ISSN 0022-460X
Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C.; (2016) Residual stress generation in tungsten-copper brazed joint using brazing alloy. In: Fusion Engineering (SOFE), 2015 IEEE 26th Symposium on. IEEE, USA. ISBN 9781479982646
Chen, Menghao and Parsons, Andrew J. and Felfel, Reda M. and Rudd, Christopher D. and Irvine, Derek J. and Ahmed, Ifty (2016) In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites : in vitro degradation and mechanical properties. Journal of the Mechanical Behavior of Biomedical Materials, 59. pp. 78-89. ISSN 1751-6161
Fowler, Steven and Toumpis, Athanasios and Galloway, Alexander (2016) Fatigue and bending behaviour of friction stir welded DH36 steel. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2659-2669. ISSN 1433-3015
Gislason, M. K. and Foster, E. and Main, D. and Fusiek, G. and Niewczas, P. and Bransby-Zachary, M. and Nash, D. H. (2016) Mechanical testing and modelling of the Universal 2 implant. Medical Engineering and Physics, 38 (6). pp. 511-517. ISSN 1873-4030
Rafee Ahamed, Rafee Abdulmajeed and Johnstone, Cameron M. and Stack, Margaret M. (2016) Impact angle effects on erosion maps of GFRP : applications to tidal turbines. Journal of Bio- and Tribo-Corrosion, 2 (2). 14. ISSN 2198-4220
Rasool, Ghulam and Sharifi, Shayan and Johnstone, Cameron and Stack, Margaret M. (2016) Mapping synergy of erosion mechanisms of tidal turbine composite materials in sea water conditions. Journal of Bio- and Tribo-Corrosion, 2 (2). 13. ISSN 2198-4220
Ho, Minh Tuan and Wu, Lei and Graur, Irina and Zhang, Yonghao and Reese, Jason (2016) Comparative study of the Boltzmann and McCormack equations for Couette and Fourier flows of binary gaseous mixtures. International Journal of Heat and Mass Transfer, 96. pp. 29-41. ISSN 0017-9310
Thomason, James and Jenkins, Peter and Yang, Liu (2016) Glass fibre strength : a review with relation to composite recycling. Fibers, 4 (2). 18. ISSN 2079-6439
Punzo, Giuliano and Young, George F. and Macdonald, Malcolm and Leonard, Naomi E. (2016) Using network dynamical influence to drive consensus. Scientific Reports, 6. 26318. ISSN 2045-2322
Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica; (2016) Development of a multiphase solver for numerical simulations of thermally driven marangoni flows. In: The 29th Scottish Fluid Mechanics Meeting, Book of Abstracts. University of Edinburgh, Edinburgh, UK, p. 15.
Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 143. pp. 362-370. ISSN 0263-8223
Silva, Andreia F. and Pimenta, Francisco and Alves, Manuel A. and Oliveira, Mónica S. N. (2016) Flow behaviour of vitreous humour biofluid during saccadic eye movements. In: 29th Scottish Fluid Mechanics Meeting 2016, 2016-05-20 - 2016-05-20, Edinburgh Centre for Carbon Innovation (ECCI).
Peat, Tom and Galloway, Alexander and Toumpis, Athanasios and Harvey, David and Yang, Wei-Hua (2016) Performance evaluation of HVOF deposited cermet coatings under dry and slurry erosion. Surface and Coatings Technology, 300. pp. 118-127. ISSN 0257-8972
Tabrizi, Ali Akbar and Al-Bugharbee, Hussein and Trendafilova, Irina and Garibaldi, Luigi (2016) A cointegration-based monitoring method for rolling bearings working in time-varying operational conditions. Meccanica. pp. 1-17. ISSN 0025-6455
Lappa, Marcello (2016) A mathematical and numerical framework for the analysis of compressible thermal convection in gases at very high temperatures. Journal of Computational Physics, 313. pp. 687-712. ISSN 0021-9991
Anwar, Ali A. and Gorash, Yevgen and Dempster, William; Naumenko, Konstantin and Aßmus, Marcus, eds. (2016) Application of multiscale approaches to the investigation of sealing surface deformation for the improvement of leak tightness in pressure relief valves. In: Advanced Methods of Continuum Mechanics for Materials and Structures. Advanced Structured Materials, 60 . Springer, Singapore, pp. 493-522. ISBN 9789811009587
Al-Bugharbee, Hussein and Trendafilova, Irina (2016) A fault diagnosis methodology for rolling element bearings based on advanced signal pretreatment and autoregressive modelling. Journal of Sound and Vibration, 369 (12 May). pp. 246-245. ISSN 0022-460X
Lappa, Marcello (2016) Patterning behavior of gravitationally modulated supercritical Marangoni flow in liquid layers. Physical Review E, 93 (5). 053107. ISSN 2470-0053
Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard (2016) Design and aerodynamic investigation of dynamic architecture. Innovative Infrastructure Solutions, 1 (1). 7. ISSN 2364-4184
Jenkins, P. G. (2016) Understanding physical changes and strength loss of E-glass fibres following exposure to elevated temperatures. Materials Science and Technology. ISSN 0267-0836
Hand, Jon W. (2016) Impact of including pre-defined object on high resolution assessments. In: eSim 2016, 2016-05-04 - 2016-05-06, McMaster University.
Tuohy, Paul G. and El-haridi, Aly (2016) Capturing uncertainty in operation, behavior and weather in building performance assessment : an Egyptian case study. In: 9th Windsor Conference, 2016-04-07 - 2016-04-10, Cumberland Lodge.
McGinty, Sean and Wheel, Marcus and McKee, Sean and McCormick, Christopher (2016) Corrigendum to "Does anisotropy promote spatial uniformity of stent-delivered drug distribution in arterial tissue?" [Int. J. Heat Mass Transfer 90 (2015) 266-279]. International Journal of Heat and Mass Transfer, 96. pp. 699-702. ISSN 0017-9310
Wu, Lei and Liu, Haihu and Reese, Jason M. and Zhang, Yonghao (2016) Non-equilibrium dynamics of dense gas under tight confinement. Journal of Fluid Mechanics, 794. pp. 252-266. ISSN 0022-1120
Yamaguchi, Hiroki and Perrier, Pierre and Ho, Minh Tuan and Méolans, J. Gilbert and Niimi, Tomohide and Graur, Irina (2016) Mass flow rate measurement of thermal creep flow from transitional to slip flow regime. Journal of Fluid Mechanics, 795. pp. 690-707. ISSN 0022-1120
Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-140. pp. 159-172. ISSN 0308-0161
Ismail, N.A. and Cartmell, M.P. (2016) Three dimensional dynamics of a flexible Motorised Momentum Exchange Tether. Acta Astronautica, 120. pp. 87-102. ISSN 0094-5765
Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138 (4). 041403. ISSN 0094-9930
Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2016) Corrosive wear behaviour of various stainless steel alloys and a Stellite 6 weld cladding. In: 17th Nordic Symposium on Tribology, 2016-06-14 - 2016-06-17. (In Press)
Thomason, James and Yang, Liu and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf (2016) Recover : regenerating the strength and value of glass fibres thermally recycled from end-of-life GRP composites. In: Refocus Recycling Summit & Expo, 2016-04-25 - 2016-04-27, Florida.
Lappa, Marcello (2016) Control of convection patterning and intensity in shallow cavities by harmonic vibrations. Microgravity Science and Technology, 28 (1). pp. 29-39. ISSN 1875-0494
Dunn, Martin A. and Wheel, Marcus A.; Altenbach, Holm and Forest, Samuel, eds. (2016) Computational analysis of the size effects displayed in beams with lattice microstructures. In: Generalized Continua as Models for Classical and Advanced Materials. Advanced Structured Materials, 42 . Springer International Publishing AG, pp. 129-143. ISBN 9783319317199
Wheel, Marcus A. and Frame, Jamie C. and Riches, Philip E.; Altenbach, Holm and Forest, Samuel, eds. (2016) Paradoxical size effects in composite laminates and other heterogeneous materials. In: Generalized Continua as Models for Classical and Advanced Materials. Advanced Structural Materials, 42 . Springer International Publishing AG, Cham, Switzerland, pp. 443-457. ISBN 9783319317199
Nagel, U. and Yang, L. and Kao, C. C. and Thomason, J. L. (2016) Effects of thermal recycling temperatures on the reinforcement potential of glass fibers. Polymer Composites. ISSN 0272-8397
Vasile, Massimiliano and Thiry, Nicolas (2016) Nuclear cycler : an incremental approach to the deflection of asteroids. Advances in Space Research, 57 (8). pp. 1805-1819. ISSN 0273-1177
Vetrisano, Massimo and Colombo, Camilla and Vasile, Massimiliano (2016) Asteroid rotation and orbit control via laser ablation. Advances in Space Research, 57 (8). 1762–1782. ISSN 0273-1177
Vetrisano, Massimo and Vasile, Massimiliano (2016) Autonomous navigation of a spacecraft formation in the proximity of an asteroid. Advances in Space Research, 57 (8). pp. 1783-1804. ISSN 0273-1177
Grey, Stuart and Marchand, Richard (2016) Modelling spacecraft illumination and the effect of specular, diffuse and multiple reflection on photoelectron emission. In: 14th Spacecraft Charging Technology Conference, 2016-04-04 - 2016-04-08, ESA/ESTEC.
Micallef, Daniel and Camilleri, Duncan and Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi (2016) Local heat generation and material flow in friction stir welding of mild steel assemblies. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (2). pp. 586-602. ISSN 1464-4207
Shahzad, Sally S. and Brennan, John and Theodossopoulos, Dimitris and Hughes, Ben and Calautit, John Kaiser (2016) Building-related symptoms, energy, and thermal control in the workplace : personal and open plan offices. Sustainability (Switzerland), 8 (4). pp. 1-20. 331. ISSN 2071-1050
Zhang, Jiaying and McInnes, Colin R. (2016) Reconfiguration of a four-bar mechanism using phase space connections. Mechanical Systems and Signal Processing. ISSN 0888-3270
Giugliano, Dario and Chen, Haofeng (2016) Micromechanical modelling on cyclic plastic behaviour of unidirectional fiber reinforced aluminium matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538
Kim, Jae Wook and Haeri, Sina and Joseph, Phillip F. (2016) On the reduction of aerofoil-turbulence interaction noise associated with wavy leading edges. Journal of Fluid Mechanics, 792. pp. 526-552. ISSN 0022-1120
MacDonald, Hamish and Infield, David and Nash, David H. and Stack, Margaret M. (2016) Mapping hail meteorological observations for prediction of erosion in wind turbines. Wind Energy, 19 (4). pp. 777-784. ISSN 1095-4244
Silva, Andreia F. and Alves, Manuel A. and Oliveira, Mónica S.N. (2016) Rheology of vitreous humour and pharmacological substitutes used in the treatment of vitreoretinal pathologies. In: ESR Anniversary Meeting and Graduate Student Workshop, 2016-03-31 - 2016-04-01, ETH Zurich.
Zhang, Yonghao and Jiang, Hui-Rong (2016) A review on continuous-flow microfluidic PCR in droplets : advances, challenges and future. Analytica Chimica Acta, 914. pp. 7-16. ISSN 0003-2670
Wu, Lei and Liu, Haihu and Reese, Jason and Zhang, Yonghao (2016) Nonequilibrium dynamics of dense gas under tight confinement. Journal of Fluid Mechanics. ISSN 0022-1120
Wu, Zhangming and Ma, Xianghong (2016) Dynamic analysis of submerged microscale plates : the effects of acoustic radiation and viscous dissipation. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2187). 20150728. ISSN 1471-2962
Sofotasiou, Polytimi and Calautit, John Kaiser and Hughes, Ben Richard and O'Connor, Dominic (2016) Towards an integrated computational method to determine internal spaces for optimum environmental conditions. Computers and Fluids, 127. pp. 146-160. ISSN 0045-7930
Zhu, Lianhua and Guo, Zhaoli and Xu, Kun (2016) Discrete unified gas kinetic scheme on unstructured meshes. Computers and Fluids, 127. pp. 211-225. ISSN 0045-7930
Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano; (2016) CAMELOT - computational-analytical multi-fidelity low-thrust optimisation toolbox. In: 6th International Conference on Astrodynamics Tools and Techniques (ICATT). ESA, DEU.
Ortega Absil, Carlos and Riccardi, Annalisa and Vasile, Massimiliano and Tardioli, Chiara (2016) SMART-UQ : uncertainty quantification toolbox for generalised intrusive and non intrusive polynomial algebra. In: 6th International Conference on Astrodynamics Tools and Techniques, 2016-03-14 - 2016-03-17.
Ioannou, N. and Liu, H. and Zhang, Y. H. (2016) Droplet dynamics in confinement. Journal of Computational Science. ISSN 1877-7503
Garcia, David and Trendafilova, Irina and Inman, Daniel J (2016) A study on the vibration-based self-monitoring capabilities of nano-enriched composite laminated beams. Smart Materials and Structures, 25 (4). 045011. ISSN 0964-1726
Abid, Muhammad and Khan, Ayesha and Nash, David Hugh and Hussain, Masroor and Wajid, Hafiz Abdul (2016) Optimized bolt tightening strategies for gasketed flanged pipe joints of different sizes. International Journal of Pressure Vessels and Piping, 139-140. pp. 22-27. ISSN 0308-0161
Karafyllias, Georgios and Giourntas, Lampros and Galloway, Alexander and Hodgkiess, Trevor (2016) Relative performance of two cast irons and two stainless steels under erosion-corrosion conditions. In: Corrosion 2016, 2016-03-06 - 2016-03-10.
Giourntas, Lampros Gerasimos and Brownlie, Frazer and Karafyllias, Georgios and Hodgkiess, Trevor and Galloway, Alexander (2016) Effect of corrosion on abrasive wear in a range of materials. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.
Allison, John and Murphy, Gavin Bruce and Counsell, John (2016) Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation. International Journal of Low-Carbon Technologies, 11 (1). pp. 109-118. ISSN 1748-1317
Benghalia, G. and Wood, J. (2016) Material and residual stress considerations associated with the autofrettage of weld clad components. International Journal of Pressure Vessels and Piping, 139-140. pp. 146-158. ISSN 0308-0161
Sousa, Patrícia C. and Pinho, Fernando T. and Alves, Manuel A. and Oliveira, Mónica S. N. (2016) A review of hemorheology : measuring technologies and recent advances. Korea Australia Rheology Journal, 28 (1). pp. 1-22. ISSN 1226-119X
Wu, Lei and Zhang, Yonghao and Lei, Yian and Reese, Jason M. (2016) Do thermal effects cause the propulsion of bulk graphene material? Nature Photonics, 10 (3). p. 139. ISSN 1749-4885
Anwar, Ali and Gorash, Yevgen and Dempster, William and Hamilton, Robert and Nash, David (2016) Effect of high temperature on structural behaviour of metal-to-metal seal in a pressure relief valve. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.
Connolly, Stephen and Gorash, Yevgen and Bickley, Alan; Bickley, Alan, ed. (2016) A comparative study of simulated and experimental results for an extruding elastomeric component. In: 23rd International Conference on Fluid Sealing 2016. BHR Group Limited, GBR, pp. 31-41. ISBN 9781510821774
Kerr, Emma and Macdonald, Malcolm; Ozimek, Martin T. and Zanetti, Renato and Bowes, Angela L. and Russell, Ryan P. and Ozimek, Martin T., eds. (2016) Improving the accuracy of orbit lifetime analysis using enhanced general perturbations methods. In: AAS/AIAA Spaceflight Mechanics Meeting 2016. Univelt Inc, USA, pp. 2529-2542. ISBN 9780877036333
Zhang, Jun and Borg, Matthew K. and Ritos, Konstantinos and Reese, Jason M. (2016) Electrowetting controls the deposit patterns of evaporated salt water nanodroplets. Langmuir, 32 (6). pp. 1542-1549. ISSN 0743-7463
Kubicek, Martin and Mehta, Piyush M. and Minisci, Edmondo and Vasile, Massimiliano; Zanetti, Renato and Russell, Ryan P. and Ozimek, Martin T. and Bowes, Angela L., eds. (2016) Multi-fidelity model fusion and uncertainty quantification using high dimensional model representation. In: Spaceflight Mechanics 2016. Advances in the Astronautical Sciences . American Astronautical Society, USA, pp. 1987-2002. ISBN 9780877036333
Mehta, Piyush M. and Kubicek, Martin and Minisci, Edmondo and Vasile, Massimiliano; Zanetti, Renato and Russell, Ryan P. and Ozimek, Martin T. and Bowes, Angela L., eds. (2016) Surrogate model for probabilistic modeling of atmospheric entry for small NEO's. In: Spaceflight Mechanics 2016. Advances in the Astronautical Sciences . American Astronautical Society, USA, pp. 1807-1822. ISBN 9780877036333
Vasile, Massimiliano and Tardioli, Chiara and Riccardi, Annalisa and Yamakawa, Hiroshi; Zanetti, Renato and Russell, Ryan P. and Ozimek, Martin T. and Bowes, Angela L., eds. (2016) Collision avoidance as a robust reachability problem under model uncertainty. In: Spaceflight Mechanics 2016. Univelt Inc, USA, pp. 4049-4064. ISBN 9780877036333
Bitharas, I. and Campbell, S.W. and Galloway, A.M. and McPherson, N.A. and Moore, A.J. (2016) Visualisation of alternating shielding gas flow in GTAW. Materials and Design, 91. pp. 424-431. ISSN 0261-3069
Stewart, Paul and Garvey, Brian and João, Elsa and Tuohy, Paul and Silva Plata, Catalina and Mendonca, Marcelo and Oliveira, Adriano Rodriques and Santos, Crispin and Alves, Leonardo Costa and Gonçalves, Ricardo J Assis F. and Souza, Edevaldo Aparecido and Mazzu, Alessia and Sheridan, Paul and Shearer, Alexander and Breen, Lewis and de Bartolo, Candice (2016) Work, Water and Food on the Energy Frontiers : Challenges and Futures for 21st Century Technologies in Scotland and Brazil. University of Strathclyde, Glasgow.
O'connor, Dominic and Calautit, John Kaiser S. and Hughes, Ben Richard (2016) A review of heat recovery technology for passive ventilation applications. Renewable and Sustainable Energy Reviews, 54. pp. 1481-1493. ISSN 1879-0690
Ritos, Konstantinos and Borg, Matthew K. and Mottram, Nigel J. and Reese, Jason M. (2016) Electric fields can control the transport of water in carbon nanotubes. Philosophical Transactions of the Royal Society A: Mathematical Physical and Engineering Sciences, 374 (2060). 20150025. ISSN 1471-2962
Zamaro, Mattia and Biggs, James D. (2016) Identification of new orbits to enable future mission oppportunities for the human exploration of the Martian moon Phobos. Acta Astronautica, 119. pp. 160-182. ISSN 0094-5765
Arena, A. and Lacarbonara, W. and Cartmell, M.P. (2016) Nonlinear interactions in deformable container cranes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (1). pp. 5-20. ISSN 0954-4062
Campobasso, M. Sergio and Minisci, Edmondo and Caboni, Marco (2016) Aerodynamic design optimization of wind turbine rotors under geometric uncertainty. Wind Energy, 19 (1). pp. 51-65. ISSN 1095-4244
Mikhlin, Yuri V and Cartmell, Matthew P and Warminski, Jerzy (2016) Special Issue on Nonlinear Dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (1). pp. 3-4. ISSN 0954-4062
Cartmell, M.P. (2016) Editor's Note : Erratum: Structural damage detection based on the reconstructed phase space for reinforced concrete slab by Zhenhua Nie, Hong Hao, Hongwei Ma (Journal of Sound and Vibration (2013) 332 (1061-1078)). Journal of Sound and Vibration, 361. p. 1. ISSN 0022-460X
Calautit, John Kaiser and Hughes, Ben Richard (2016) A passive cooling wind catcher with heat pipe technology : CFD, wind tunnel and field-test analysis. Applied Energy, 162. pp. 460-471. ISSN 0306-2619
Monari, Filippo and Strachan, Paul (2016) Characterisation of an airflow network model by sensitivity analysis : Parameter screening, fixing, prioritising and mapping. Journal of Building Performance Simulation. ISSN 1940-1493
Logan, B. P. and Toumpis, A. I. and Galloway, A. M. and McPherson, N. A. and Hambling, S. J. (2016) Dissimilar friction stir welding of duplex stainless steel to low alloy structural steel. Science and Technology of Welding and Joining, 21 (1). pp. 27-35. ISSN 1362-1718
Yang, Hui Xin and Vetrisano, Massimo and Vasile, Massimiliano and Zhang, WeiHua (2016) Autonomous navigation of spacecraft formation in the proximity of minor bodies. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 230 (1). pp. 189-204. ISSN 0954-4100
Mehta, Piyush M. and Kubicek, Martin and Minisci, Edmondo and Vasile, Massimiliano; Majji, Manoranjan and Turner, James D. and Wawrzyniak, Geoff G. and Cerven, William Todd, eds. (2016) Debris re-entry modeling using high dimensional derivative based uncertainty quantification. In: Astrodynamics 2015. Advances in Astronautical Sciences, 156 . American Astronautical Society, USA, pp. 3993-4011. ISBN 9780877036296
Strachan, Paul and Svehla, Katalin and Heusler, Ingo and Kersken, Matthias (2016) Whole model empirical validation on a full-scale building. Journal of Building Performance Simulation. ISSN 1940-1493
Tardioli, Chiara and Vasile, Massimiliano; Majji, Manoranjan and Turner, James D. and Wawrzyniak, Geoff G. and Cerven, William Todd, eds. (2016) Collision and re-entry analysis under aleatory and epistemic uncertainty. In: Astrodynamics 2015. Advances in Astronautical Sciences, 156 . Univelt Inc, USA, pp. 4205-4220. ISBN 9780877036296
2015
Gaurier, B. and Germain, G. and Facq, J.V. and Johnstone, C.M. and Grant, A.D. and Day, A.H. and Nixon, E. and de Felice, F. and Constanzo, M. (2015) Tidal energy "Round Robin" tests - comparisons between towing tank and circulating tank results. International Journal of Marine Energy, 12. pp. 87-109. ISSN 2214-1669
López, Alejandro and Nicholls, William and Stickland, Matthew T. and Dempster, William M. (2015) CFD study of jet impingement test erosion using Ansys Fluent® and OpenFoam®. Computer Physics Communications, 197. pp. 88-95. ISSN 0010-4655
Moftah.S. Moftah Alshaikh, M and Dempster, William (2015) A CFD study of two-phase frozen flow of air/water through a safety relief valve. International Journal of Chemical Reactor Engineering, 13 (4). pp. 533-540. ISSN 1542-6580
Strachan, P. and Monari, F. and Kersken, M. and Heusler, I. (2015) IEA annex 58 : full-scale empirical validation of detailed thermal simulation programs. Energy Procedia, 78. pp. 3288-3293. ISSN 1876-6102
Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058
White, Craig and Scanlon, Thomas and Brown, Richard (2015) The permeability of ablative materials under rarefied gas conditions. Journal of Spacecraft and Rockets, 53 (1). pp. 134-142. ISSN 0022-4650
Abid, M. and Khan, A. and Nash, D.H. and Hussain, M. and Wajid, H.A. (2015) Simulation of optimized bolt tightening strategies for gasketed flanged pipe joints. Procedia Engineering, 130. pp. 204-213. ISSN 1877-7058
Anwar, A.A. and Gorash, Y. and Dempster, W. and Hamilton, R. (2015) Literature research in relevant fields to understand pressure relief valve leak tightness in a static closed state. Procedia Engineering, 130. pp. 95-103. ISSN 1877-7058
Barbera, D. and Chen, H.F. and Liu, Y.H. (2015) On the creep fatigue behavior of Metal Matrix Composites. Procedia Engineering, 130. pp. 1121-1136. ISSN 1877-7058
Benghalia, G. and Wood, J. (2015) Autofrettage of weld clad components. Procedia Engineering, 130 (2015). pp. 453-465. ISSN 1877-7058
Dempster, William and Alshaikh, Moftah; Tu, Shan-Tung and Chen, Xuedong, eds. (2015) An investigation of the two phase flow and force characteristics of a safety valve. In: 14th International Conference on Pressure Vessel Technology (ICPVT-14). Procedia Engineering, 130 . Elsevier Limited, CHN, pp. 77-86. ISBN 9781510816886
Jackson, G.D. and Chen, H.F. and Tipping, D. (2015) Shakedown and creep rupture assessment of a header branch pipe using the Linear Matching Method. Procedia Engineering, 130. pp. 1705-1718. ISSN 1877-7058
Stevenson, Ryan and Toumpis, Athanasios and Galloway, Alexander (2015) Defect tolerance of friction stir welds in DH36 steel. Materials and Design, 87. pp. 701-711. ISSN 0261-3069
Wu, Lei and Zhang, Yonghao and Reese, Jason M. (2015) Fast spectral solution of the generalised Enskog equation for dense gases. Journal of Computational Physics, 303. pp. 66-79. ISSN 0021-9991
Önskog, Thomas and Zhang, Jun (2015) An accurate treatment of diffuse reflection boundary conditions for a stochastic particle Fokker-Planck algorithm with large time steps. Physica A: Statistical Mechanics and its Applications, 440. pp. 139-146. ISSN 0378-4371
Silva, A.F. and Alves, M.A. and Oliveira, M.S.N. (2015) Rheology of vitreous humour and pharmacological substitutes used in eye surgery. In: British Society of Rheology Winter Meeting 2015, 2015-12-14 - 2015-12-15, University of Glasgow.
Zografos, Konstantinos and Alves, M.A. and Oliveira, Monica (2015) Optimisation of T-shaped microchannels for investigating the extensional behaviour of complex fluids. In: British Society of Rheology Winter Meeting 2015, 2015-12-14 - 2015-12-15, University of Glasgow.
Cairns, J.W.P. and McPherson, N.A. and Galloway, A.M. (2015) Identification of key GMAW fillet weld parameters and interactions using artificial neural networks. Welding and Cutting, 15 (1). pp. 51-57. ISSN 1612-3433 (In Press)
Clarke, Joe and Cockroft, Jeremy and Cowie, Andrew and Hand, Jon and Kelly, Nick and Samuel, Aizaz and Tang, Dechao; (2015) On the high resolution simulation of building/plant systems. In: 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings. International Building Performance Simulation Association, IND, pp. 90-97.
Elharidi, Aly Mohamed and Tuohy, Paul and Teamah, Mohamed and Hanafy, Ahmed; Mathur, Jyotirmay and Garg, Vishal, eds. (2015) Calibration of numerical simulations modeling of nonresidential building in hot humid climate region. In: Proceedings of BS2015. International Building Performance Simulation Association, IND, pp. 2377-2384. ISBN 9789352301188
Flett, Graeme and Kelly, Nicolas; (2015) Household-differentiated demand modelling for communities. In: 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings. International Building Performance Simulation Association, IND, pp. 1821-1828.
Kelly, Nick and Samuel, Aizaz and Tuohy, Paul; (2015) The effect of hot water use patterns on heating load and demand shifting opportunities. In: 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings. International Building Performance Simulation Association, IND, pp. 1298-1305.
MacKenzie, Alasdair and Lopez, A and Ritos, K and Stickland, M T and Dempster, W M; (2015) A comparison of CFD software packages' ability to model a submerged jet. In: The 11th International Conference on CFD in the Minerals and Process Industries. Commonwealth Scientific and Industrial Research Organisation (CSIRO), AUS, pp. 1-4. ISBN 9781486306206
Calautit, John Kaiser and Chaudhry, Hassam Nasarullah and Hughes, Ben Richard (2015) Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment. Data in Brief, 5. pp. 424-428. ISSN 2352-3409
Frulla, G. and Gili, P. and Visone, M. and D'Oriano, V. and Lappa, M. (2015) A practical engineering approach to the design and manufacturing of a mini kW blade wind turbine : definition, optimisation and CFD analysis. Fluid Dynamics and Materials Processing, 11 (3). pp. 257-277. ISSN 1555-2578
Ma, Xiang and Scarpa, Fabrizio and Peng, Hua Xin and Allegri, Giuliano and Yuan, Jie and Ciobanu, Romeo (2015) Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance. Aerospace Science and Technology, 47. pp. 367-377. ISSN 1270-9638
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2015) Framework for the buckling optimisation of variable-angle-tow composite plates. AIAA Journal, 53 (12). pp. 3788-3804. ISSN 0001-1452
Kokkinakis, Ioannis and Drikakis, D. and Youngs, D. L. and Williams, R. J. R. (2015) Two-equation and multi-fluid turbulence models for Rayleigh–Taylor mixing. International Journal of Heat and Fluid Flow, 56. pp. 233-250. ISSN 0142-727X
Munoz De Escalona, Patricia and Shokrani, A. and Newman, S.T. (2015) Influence of cutting environments on surface integrity and power consumption of austenitic stainless steel. Robotics and Computer Integrated Manufacturing, 36. pp. 60-69. ISSN 0736-5845
Polezhayeva, Helena and Toumpis, Athanasios and Galloway, Alexander and Molter, Lars and Ahmad, Bilal and Fitzpatrick, Michael E. (2015) Fatigue performance of friction stir welded marine grade steel. International Journal of Fatigue, 81. pp. 162-170. ISSN 0142-1123
Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. and Canal, Luis P. and González, Carlos D. and LLorca, Javier (2015) Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law. Engineering Fracture Mechanics, 149. pp. 326-337. ISSN 0013-7944
McGinty, Sean and Wheel, Marcus and McKee, Sean and McCormick, Christopher (2015) Does anisotropy promote spatial uniformity of stent-delivered drug distribution in arterial tissue? International Journal of Heat and Mass Transfer, 90. pp. 266-279. ISSN 0017-9310
Rasool, G. and Stack, M.M. (2015) Tribo-oxidation maps for Ti against steel. Tribology International, 91. pp. 258-266. ISSN 0301-679X
Ritos, Konstantinos and Borg, Matthew Karl and Lockerby, Duncan A. and Emerson, David and Reese, Jason (2015) Hybrid molecular-continuum simulations of water flow through carbon nanotube membranes of realistic thickness. Microfluidics and Nanofluidics, 19 (5). pp. 997-1010. ISSN 1613-4982
Sousa, P. C. and Pinho, F. T. and Oliveira, M. S. N. and Alves, M. A. (2015) Purely elastic flow instabilities in microscale cross-slot devices. Soft Matter, 2015 (11). pp. 8856-8862. ISSN 1744-6848
Toumpis, Athanasios and Galloway, Alexander and Camilleri, Duncan and Arbaoui, Larbi; (2015) Recent developments in steel friction stir welding : Project HILDA. In: ASME 2015 International Mechanical Engineering Congress and Exposition. ASME, USA. ISBN 978-0-7918-5736-6
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2015) A CFD and experimental study on cavitation in positive displacement pump : benefits and drawbacks of the "full" cavitation model. Engineering Applications of Computational Fluid Mechanics, 10 (1). pp. 57-71. ISSN 1994-2060
Zhang, Jun and Borg, Matthew K. and Sefiane, Khellil and Reese, Jason M. (2015) Wetting and evaporation of salt-water nanodroplets : a molecular dynamics investigation. Physical Review E, 92 (5). 052403. ISSN 2470-0053
Siddons, Craig and Macleod, Calum and Yang, Liu and Stack, Margaret (2015) An experimental approach to analysing rain droplet impingement on wind turbine blade materials. In: EWEA 2015 Annual Event, 2015-11-17 - 2015-11-20, Paris expo Porte de Versailles.
Barbera, Daniele and Laurenzi, Susanna (2015) Nonlinear buckling and folding analysis of a storable tubular ultrathin boom for nanosatellites. Composite Structures, 132. pp. 226-238. ISSN 0263-8223
McGrath, Ciara and Kerr, Emma and Macdonald, Malcolm (2015) An analytical low-cost deployment strategy for satellite constellations. In: 13th Reinventing Space Conference, 2015-11-09 - 2015-11-12.
Barbera, Daniele and Chen, Haofeng (2015) Creep rupture assessment by a robust creep data interpolation using the linear matching method. European Journal of Mechanics - A/Solids, 54. pp. 267-279. ISSN 0997-7538
Cross, Daniel and Hughes, Ben and Ingham, Derek and Ma, Lin (2015) A validated numerical investigation of the effects of high blockage ratio and train and tunnel length upon underground railway aerodynamics. Journal of Wind Engineering and Industrial Aerodynamics, 146. pp. 195-206. ISSN 0167-6105
Drikakis, Dimitris and Frank, Michael (2015) Advances and challenges in computational research of micro and nano flows. Microfluidics and Nanofluidics, 19 (5). pp. 1019-1033. ISSN 1613-4982
Manuello Bertetto, Andrea and Besalduch, Luigi Antonio and Minisci, Edmondo and Kubicek, Martin and Ricciu, Roberto (2015) A novel model for uncertainty propagation analysis applied for human thermal comfort evaluation. WSEAS Transactions on Environment and Development, 11. pp. 246-255. 27. ISSN 1790-5079
Acayaba, Gabriel Medrado Assis and Muñoz de Escalona, Patricia (2015) Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel. CIRP Journal of Manufacturing Science and Technology, 11. pp. 62-67. ISSN 1755-5817
Heiligers, Jeannette and Hiddink, Sander and Noomen, Ron and McInnes, Colin (2015) Solar sail Lyapunov and halo orbits in the Earth-Moon three-body problem. Acta Astronautica, 116. pp. 25-35. ISSN 0094-5765
Stack, Margaret M and Geringer, Jean and Mathew, Mathew T (2015) Editorial - Proceedings of 4th International Conference on Tribo-Corrosion, Glasgow 2014 : Volume 1. Tribology International, 91. p. 197. ISSN 0301-679X
Tuohy, Paul Gerard and Kim, Jae Min and Samuel, Aizaz and Peacock, Andrew D and Owens, E.H. and Dissanayake, M. and Corne, D.W. and Galloway, Stuart and Sontonja, S. and Todoli, C. (2015) Orchestration of renewable generation in low energy buildings and districts using energy storage and load shaping. Energy Procedia, 78. pp. 2172-2177. ISSN 1876-6102
Kubicek, Martin and Minisci, Edmondo and Cisternino, Marco (2015) High dimensional sensitivity analysis using surrogate modeling and high dimensional model representation. International Journal for Uncertainty Quantification, 5 (5). pp. 393-414. ISSN 2152-5099
Allison, John (2015) Robust control of net-zero offices with integrated hybrid supply system and energy storage. In: Microgen IV, 2015-10-28 - 2015-10-30, Ito International Research Center.
Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard and Sim, Lik Fang (2015) CFD and experimental study on the effect of progressive heating on fluid flow inside a thermal wind tunnel. Computation, 3 (4). pp. 509-527. ISSN 1866-9964
Gorash, Yevgen and Dempster, William and Nicholls, William D. and Hamilton, Robert (2015) Fluid pressure penetration for advanced FEA of metal-to-metal seals. Proceedings in Applied Mathematics and Mechanics, PAMM, 15 (1). pp. 197-198. ISSN 1617-7061
Martin, Juan Manuel Romero and Di-Carlo, Marilena and Vasile, Massimiliano; (2015) Automatic planning and scheduling of active removal of non-operational satellites in low earth orbit. In: 66th International Astronautical Congress 2015, IAC 2015. International Astronautical Federation (IAF), ISR, pp. 5334-5348. ISBN 9781510818934
Garcia, D. and Palazzetti, R. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2015) Vibration-based delamination diagnosis and modelling for composite laminate plates. Composite Structures, 130. pp. 155-162. ISSN 0263-8223
Kelly, Nicolas and Samuel, Aizaz and Hand, Jon (2015) Testing integrated electric vehicle charging and domestic heating strategies for future UK housing. Energy and Buildings, 105. pp. 377-392. ISSN 0378-7788
Toso, Federico and Riccardi, Annalisa and Minisci, Edmondo and Maddock, Christie Alisa (2015) Optimisation of ascent and descent trajectories for lifting body space access vehicles. In: 66th International Astronautical Congress, IAC2015, 2015-10-12 - 2015-10-16.
Ojo, Anthony O. and Fond, Benoit and Van Wachem, Berend G. M. and Heyes, Andrew L. and Beyrau, Frank (2015) Thermographic laser Doppler velocimetry. Optics Letters, 40 (20). pp. 4759-4762. ISSN 0146-9592
Kerr, Emma and Macdonald, Malcolm (2015) Improving the accuracy of general perturbations methods of spacecraft lifetime analysis. In: 66th International Astronautical Congress, IAC2015, 2015-10-12 - 2015-10-16.
Lytwyn, M. and Chen, H. F. and Ponter, A. R. S. (2015) A generalised method for ratchet analysis of structures undergoing arbitrary thermo-mechanical load histories. International Journal for Numerical Methods in Engineering, 104 (2). pp. 104-124. ISSN 0029-5981
McGrath, Ciara and Macdonald, Malcolm (2015) Design of a reconfigurable satellite constellation. In: 66th International Astronautical Congress, IAC2015, 2015-10-12 - 2015-10-16.
Karafyllias, Georgios and Brownlie, Frazer and Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander and Pearson, Alastair (2015) Corrosive wear behaviour of various nitriding treatments on a low alloy steel. In: 1st International Conference on Tribology, 2015-10-07 - 2015-10-09. (Unpublished)
Cassineli Palharini, Rodrigo and White, Craig and Scanlon, Thomas J. and Brown, Richard E. and Borg, Matthew K. and Reese, Jason M. (2015) Benchmark numerical simulations of rarefied non-reacting gas flows using an open-source DSMC code. Computers and Fluids, 120. pp. 140-157. ISSN 0045-7930
Zamaro, Mattia and Biggs, James (2015) Natural and artificial orbits around the Martian moon Phobos. PhD thesis, University Of Strathclyde.
Beesley, Ross and Chen, Haofeng and Hughes, Martin (2015) On the modified monotonic loading concept for the calculation of the cyclic j-integral. Journal of Pressure Vessel Technology, 137 (5). 051406. ISSN 0094-9930
Camilleri, Duncan and Micallef, Daniel and Arbaoui, Larbi and Toumpis, Athanasios and Galloway, Alexander (2015) Numerical modelling techniques applicable for the prediction of residual stresses and distortion due to mild steel DH36 frictions stir welding. In: 4th International Conference on Friction Stir Welding, FSWP2015, 2015-10-01 - 2015-10-02.
Fleming, J.S. (2015) The energy efficiency of refrigerants : an assessment based on thermophysical properties. International Journal of Refrigeration, 58. pp. 235-242. ISSN 0140-7007
Wu, Lei and Zhang, Jun and Reese, Jason M. and Zhang, Yonghao (2015) A fast spectral method for the Boltzmann equation for monatomic gas mixtures. Journal of Computational Physics, 298. pp. 602-621. ISSN 0021-9991
Yáñez-González, Álvaro and Ruiz-Trejo, Enrique and Van Wachem, Berend and Skinner, Stephen and Beyrau, Frank and Heyes, Andrew (2015) A detailed characterization of BaMgAl10O17 : Eu phosphor as a thermal history sensor for harsh environments. Sensors and Actuators A: Physical, 234. pp. 339-345. ISSN 0924-4247
Downes, Kerrie A. and Thomason, James L. (2015) A method to measure the influence of humidity and temperature on the interfacial adhesion in polyamide composites. Composite Interfaces, 22 (8). pp. 757-766. ISSN 0927-6440
Easton, David and Zhang, Yuxuan and Wood, James and Galloway, Alexander and Robbie, Mikael Olsson and Hardie, Christopher (2015) Brazing development and interfacial metallurgy study of tungsten and copper joints with eutectic gold copper brazing alloy. Fusion Engineering and Design, 98-99. pp. 1956-1959. ISSN 0920-3796
Vasile, Massimiliano and Romero Martin, Juan Manuel and Masi, Luca and Minisci, Edmondo and Epenoy, Richard and Martinot, Vincent and Baig, Jordi Fontdecaba (2015) Incremental planning of multi-gravity assist trajectories. Acta Astronautica, 115. pp. 407-421. ISSN 0094-5765
Doman, Darrel A. and Murray, Robynne E. and Pegg, Michael J. and Gracie, Katie and Johnstone, Cameron M. and Nevalainen, Thomas (2015) Tow-tank testing of a 1/20th scale horizontal axis tidal turbine with uncertainty analysis. International Journal of Marine Energy, 11. pp. 105-119. ISSN 2214-1669
Garcia, David and Stickland, Matthew and Liśkiewicz, Grzegorz Pawel (2015) Dynamical system analysis of unstable flow phenomena in centrifugal blower. Open Engineering, 5 (1). pp. 332-342. ISSN 2391-5439
Iannetti, Aldo and Stickland, Matthew T. and Dempster, William M. (2015) An advanced CFD model to study the effect of non-condensable gas on cavitation in positive displacement pumps. Open Engineering, 5 (1). pp. 323-331. ISSN 2391-5439
Battista, Emmanuele and Dell' Agnello, Simone and Esposito, Giampiero and Di Fiore, Luciano and Simo, Jules and Grado, Aniello (2015) Earth-Moon Lagrangian points as a testbed for general relativity and effective field theories of gravity. Physical Review D: Particles, Fields, Gravitation and Cosmology, 92. 064045. ISSN 1550-2368
Zhang, Jiaying and McInnes, Colin R (2015) Reconfiguring smart structures using approximate heteroclinic connections. Smart Materials and Structures, 24 (10). 105034. ISSN 0964-1726
Markides, Christos N. and Heyes, Andrew (2015) Selected papers from the Thirteenth UK Heat Transfer Conference. Heat Transfer Engineering, 36 (14-15). pp. 1163-1164. ISSN 0145-7632
Yáñez-González, Álvaro and Skinner, Stephen and Beyrau, Frank and Heyes, Andrew L. (2015) Reusable thermal history sensing via oxidation of a divalent rare earth ion-based phosphor synthesized by the Sol-Gel process. Heat Transfer Engineering, 36 (14-15). pp. 1275-1281. ISSN 0145-7632
Zhang, Jiaying and McInnes, Colin R; (2015) Reconfiguring smart structures using approximate heteroclinic connections in a spring-mass model. In: Proceedings of ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers (ASME). ISBN 978-0-7918-5729-8
Dai, Yanwei and Liu, Yinghua and Chen, Haofeng and Liu, Donghuan (2015) The interacting effect for collinear cracks near mismatching bimaterial interface under elastic creep. Journal of Pressure Vessel Technology. ISSN 0094-9930 (In Press)
Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Enhanced approach of assessing the corrosive wear of engineering materials under impingement. Wear, 338-339. pp. 155-163. ISSN 0043-1648
Liu, Haihu and Ju, Yaping and Wang, Ningning and Xi, Guang and Zhang, Yonghao (2015) Lattice Boltzmann modeling of contact angle and its hysteresis in two-phase flow with large viscosity difference. Physical Review E, 92 (3). 033306. ISSN 2470-0053
Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo; (2015) Multi-population inflationary differential evolution algorithm with adaptive local restart. In: 2015 IEEE Congress on Evolutionary Computation, CEC 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., JPN, pp. 632-639. ISBN 9781479974924
Biggs, James (2015) A quaternion-based attitude tracking controller for robotic systems. In: IMA Conference on Mathematics of Robotics, 2015-09-09 - 2015-09-11, University of Oxford, St Anne's College.
Persico, Adriano Rosario and Clemente, Carmine and Ilioudis, Christos V. and Gaglione, Domenico and Cao, Jianlin and Soraghan, John; (2015) Micro-Doppler based recognition of ballistic targets using 2D gabor filters. In: 2015 Sensor Signal Processing for Defence (SSPD). IEEE, GBR, pp. 1-5. ISBN 9781479974436
Ahamed, Rafee A.R. and Johnstone, Cameron M. and Stack, Margaret M. (2015) Mapping blade angle effects for the erosion of polymer based composites : an approach to developing smart materials for tidal turbines. In: 11th European Wave and Tidal Energy Conference (EWTEC2015), 2015-09-06 - 2015-09-11, Cité des Congrès de Nantes.
Sharifi, Shayan and Johnstone, Cameron and Stack, Margaret M. (2015) Tribological challenges of scaling up tidal turbine blades. In: 11th European Wave and Tidal Energy Conference (EWTEC2015), 2015-09-06 - 2015-09-11, Cité des Congrès de Nantes.
Toumpis, Athanasios and Galloway, Alexander and Molter, Lars and Polezhayeva, Helena (2015) Systematic investigation of the fatigue performance of a friction stir welded low alloy steel. Materials and Design, 80. pp. 116-128. ISSN 0261-3069
Elharidi, Aly Mohamed Aly Hassan and Tuohy, Paul Gerard and Teamah, Mohamed and Hanafy, Ahmed (2015) Calibration of numerical simulations modelling of nonresidential building in hot humid clmate region. In: BS2015, 14th International Conference of the IBPSA, 2015-12-07 - 2015-12-09. (In Press)
Thiry, Nicolas and Vasile, Massimiliano; (2015) Deflection of uncooperative targets using laser ablation. In: Proceedings of SPIE - The International Society for Optical Engineering. SPIE, USA. ISBN 9781628417821
Zografos, Konstantinos and Barber, Robert W. and Emerson, David R. and Oliveira, Mónica S. N. (2015) A design rule for constant depth microfluidic networks for power-law fluids. Microfluidics and Nanofluidics, 19 (3). pp. 737-749. ISSN 1613-4982
Clarke, Joseph Andrew and Hensen, Jan (2015) Integrated building performance simulation : progress, prospects and requirements. Building and Environment, 91. pp. 294-306. ISSN 0360-1323
Lawson, Mark and Basta, Antoine and Uzzaman, Md Asraf (2015) Design of stainless steel sections with circular openings in shear. Journal of Constructional Steel Research, 112. pp. 228-241. ISSN 0143-974X
Ley, F.H. and Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2015) Effect of shielding gas parameters on weld metal thermal properties in gas metal arc welding. International Journal of Advanced Manufacturing Technology, 80 (5). pp. 1213-1221. ISSN 1433-3015
Simo, Jules and Furfaro, Roberto and Mueting, Joel; (2015) Performance evaluation of artificial neural network-based shaping algorithm for planetary pinpoint guidance. In: Advances in the Astronautical Sciences. Advances in the Astronautical Sciences, 155 . Univelt Inc, USA, pp. 2233-2248.
Wu, Lei and Liu, Haihu and Zhang, Yonghao and Reese, Jason M. (2015) Influence of intermolecular potentials on rarefied gas flows : fast spectral solutions of the Boltzmann equation. Physics of Fluids, 27 (8). 082002. ISSN 1070-6631
Conte, Davide and Di Carlo, Marilena and Ho, Koki and Spencer, David B. and Vasile, Massimiliano (2015) Earth-Mars transfers through Moon distant retrograde orbits. In: AAS/AIAA Astrodynamics Specialist Conference 2015, 2015-08-09 - 2015-08-13, Colorado.
O'Connor, Dominic and Calautit, John and Hughes, Ben Richard (2015) Effect of rotation speed of a rotary thermal wheel on ventilation supply rates of wind tower system. Energy Procedia, 75. pp. 1705-1710. ISSN 1876-6102
Shahzad, Sally S. and Brennan, John and Theodossopoulos, Dimitris and Hughes, Ben and Calautit, John Kaiser (2015) Energy efficiency and user comfort in the workplace : Norwegian cellular vs. British open plan workplaces. Energy Procedia, 75. pp. 807-812. ISSN 1876-6102
Garcia Cava, David and Tcherniak, Dmitri and Trendafilova, Irina; (2015) Damage assessment for wind turbine blades based on a multivariate statistical approach. In: Journal of Physics Conference Series. Journal of Physics: Conference Series, 628 . Institute of Physics Publishing, BEL.
Tsoutsanis, Panagiotis and Kokkinakis, Ioannis and Könözsy, László and Drikakis, Dimitris and Williams, Robin J.R. and Youngs, David L. (2015) Comparison of structured- and unstructured-grid, compressible and incompressible methods using the vortex pairing problem. Computer Methods in Applied Mechanics and Engineering, 293. pp. 207-231. ISSN 0045-7825
Wheel, M.A. and Frame, J.C. and Riches, P.E. (2015) Is smaller always stiffer? On size effects in supposedly generalized continua. International Journal of Solids and Structures, 67-68. pp. 84-92. ISSN 0020-7683
Riccardi, Annalisa and Tardioli, Chiara and Vasile, Massimiliano; Turner, J. D. and Wawrzyniak, G. G. and Cerven, W. T. and Majji, M., eds. (2015) An intrusive approach to uncertainty propagation in orbital mechanics based on Tchebycheff polynomial algebra. In: Astrodynamics 2015. Advances in Astrnautical Sciences . American Astronautical Society, USA, pp. 707-722. ISBN 9780877036296
Tester, Bryan and Vasile, Massimiliano; Majji, Manoranjan and Turner, James D. and Wawrzyniak, Geoff G. and Cerven, William Todd, eds. (2015) Induced fragmentation of asteroids during close encounters. In: Astrodynamics 2015. Advances in Astrnautical Sciences . American Astronautical Society, USA, pp. 3687-3700. ISBN 9780877036296
Heiligers, Maria and Macdonald, Malcolm and Parker, Jeffrey S. (2015) Design and applications of solar sail periodic orbits in the non-autonomous Earth-Moon system. In: AAS/AIAA Astrodynamics Specialist Conference 2015, 2015-08-09 - 2015-08-13, Colorado.
Tardioli, Chiara and Kubicek, Martin and Vasile, Massimiliano and Minisci, Edmondo and Riccardi, Annalisa; Majji, Manoranjan and Turner, James D. and Wawrzyniak, Geoff G. and Cerven, William Todd, eds. (2015) Comparison of non-intrusive approaches to uncertainty propagation in orbital mechanics. In: Astrodynamics 2015. Advances in Astrnautical Sciences . American Astronautical Society, USA, pp. 3979-3992. ISBN 9780877036296
Vasile, Massimiliano (2015) Preface : Advances in asteroid and space debris science and technology-Part 1. Advances in Space Research, 56 (3). pp. 365-366. ISSN 0273-1177
Mridha, Shahjahan and Idriss, A.N. and Maleque, M.A. and Jaacob, I.L. and Baker, Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836
Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Parametric study of failure mechanisms and optimal configurations of pseudo-ductile thin-ply UD hybrid composites. Composites Part A: Applied Science and Manufacturing, 74. pp. 123-131. ISSN 1359-835X
Baillie, P. and Campbell, S. W. and Galloway, A. M. and Cater, S. R. and McPherson, N. A. (2015) Friction stir welding of 6mm thick carbon steel underwater and in air. Science and Technology of Welding and Joining, 20 (7). pp. 585-593. ISSN 1362-1718
Borggräfe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin R. (2015) Shape control of slack space reflectors using modulated solar pressure. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2179). 0119. ISSN 1471-2962
Lopez, Alejandro and Stickland, Matthew and Dempster, William (2015) Modeling erosion in a centrifugal pump in an Eulerian-Lagrangian frame using OpenFOAM®. Open Engineering, 5 (1). pp. 274-279.
Holland, David M. and Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2015) Enhancing nano-scale computational fluid dynamics with molecular pre-simulations : unsteady problems and design optimisation. Computers and Fluids, 115. pp. 46-53. ISSN 0045-7930
Sharpe, Tim and Farren, Paul and Howieson, Stirling and Tuohy, Paul and McQuillan, Jonathan (2015) Occupant interactions and effectiveness of natural ventilation strategies in contemporary new housing in Scotland, UK. International Journal of Environmental Research and Public Health, 12 (7). pp. 8480-8497. ISSN 1661-7827
Jenkins, Peter and Riopedre Mendez, Sara and Saez Rodriguez, Eduardo and Yang, Liu and Thomason, James (2015) Investigation of the strength of thermally conditioned basalt and e-glass fibres. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Minty, Ross and Thomason, James and Petersen, Helga (2015) The role of the epoxy resin : curing agent ratio in composite interfacial strength by single fibre microbond test. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Nagel, Ulf and Thomason, James (2015) Regeneration of thermally recycled glass fibre for cost effective composite recycling : the effect of fibre regeneration and matrix modification. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Pender, Kyle and Yang, Liu (2015) Investigation into the use of metal oxides for catalysed epoxy resin decomposition. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Raghavalu Thirumalai, Durai Prabhakaran and Thomason, James (2015) Recycled glass fibre/polyester composites : processing and mechanical characterization. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Thomason, James and Saez Rodriguez, Eduardo and Kao, Chih-Chuan and Nagel, Ulf and Yang, Liu (2015) Recover : Regenerating the strength of glass fibres thermally recycled from end-of-life. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Yang, Liu and Jenkins, Peter and Liggat, John and Thomason, James (2015) Strength of thermally conditioned glass fibre degradation, retention and regeneration. In: 20th International Conference on Composite Materials, 2015-07-19 - 2015-07-24.
Sales Fidalgo, Joana Alexandra and Zografos, Konstantinos and Casanellas, Laura and Lindner, Anke and Oliveira, Monica (2015) Microfluidic bifurcating networks for power-law fluids. In: 6th International Symposium on Bifurcations and Instabilities in Fluid Dynamics 2015, 2015-07-15 - 2015-07-17, ESPCI.
Zografos, Konstantinos and Alves, M.A. and Oliveira, Monica (2015) Microfluidic converging-diverging channels optimised for performing extensional measurements. In: 6th International Symposium on Bifurcations and Instabilities in Fluid Dynamics 2015, 2015-07-15 - 2015-07-17, ESPCI.
Furfaro, Roberto and Wibben, Daniel and Gaudet, Brian and Simo, Jules (2015) Terminal multiple surface sliding guidance for planetary landing : Development, tuning and optimization via reinforcement learning. Journal of the Astronautical Sciences. ISSN 0021-9142
Al-Bugharbee, H and Trendafilova, I (2015) Autoregressive modelling for rolling element bearing fault diagnosis. Journal of Physics: Conference Series, 628 (1). 012088. ISSN 1742-6588
Casseau, Vincent and Scanlon, Thomas J. and Brown, Richard E. (2015) Development of a two-temperature open source CFD model for hypersonic reacting flows. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.
Espinoza, Daniel and Scanlon, Thomas and Brown, Richard (2015) Validation of tools to accelerate high-speed CFD simulations using OpenFOAM. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.
Mogavero, A. and Brown, R. E. (2015) An improved engine analysis and optimization tool fo hypersonic combined cycle engines. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.
Wuilbercq, R. and Mogavero, A. and Brown, R. E. (2015) Robust multi-disciplinary modelling of future re-usable aerospace planes. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.
McGinty, Sean and Wheel, Marcus and McKee, Sean and McCormick, Christopher and McKittrick, Craig and Kennedy, Simon and Oldroyd, Keith G.; Nithiarasu, Perumal and Budyn, Elisa, eds. (2015) Can anisotropy enhance the spatial uniformity of drug distribution in biological tissue? In: 4th International Conference on Computational & Mathematical Biomedical Engineering. CMBE, FRA, pp. 194-197. ISBN 9780956291431
Peloni, Alessandro and Barbera, Daniele and Laurenzi, Susanna and Circi, Christian (2015) Dynamic and structural performances of a new sailcraft concept for interplanetary missions. The Scientific World Journal, 2015. 714371. ISSN 2356-6140
Munoz De Escalona, Patricia and Maropoulos, Paul G. (2015) A geometrical model for surface roughness prediction when face milling Al 7075-T7351 with square insert tools. Journal of Manufacturing Systems, 36. pp. 216-223. ISSN 0278-6125
Zamaro, Mattia and Biggs, James (2015) Natural motion around the Martian moon Phobos : The dynamical substitutes of the libration point orbits in an elliptical three-body problem with gravity harmonics. Celestial Mechanics and Dynamical Astronomy, 122 (3). pp. 263-302. ISSN 0923-2958
Hayes, A. and Sharifi, S. and Stack, M.M. (2015) Micro-abrasion-corrosion maps of 316L stainless steel in artificial saliva. Journal of Bio- and Tribo-Corrosion, 1 (2). ISSN 2198-4220
Scanlon, Thomas J. and White, Craig and Borg, Matthew K. and Palharini, Rodrigo C. and Farbar, Erin and Boyd, Iain D. and Reese, Jason M. and Brown, Richard E. (2015) Open source Direct Simulation Monte Carlo (DSMC) chemistry modelling for hypersonic flows. AIAA Journal, 53 (6). pp. 1670-1680. ISSN 0001-1452
Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2015) Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 73. pp. 35-44. ISSN 1359-835X
Bell, Andrew M and Brown, Richard E and Mulheran, Paul A (2015) Multi-scale chemistry modelling for spacecraft atmospheric re-entry. In: Faculty of Engineering Research Presentation Day 2015, 2015-06-24 - 2015-06-24. (Unpublished)
Wood, James and Olsson Robbie, Mikael and Hamilton, Niall Robert and Easton, David and Zhang, Yuxuan (2015) Theoretical elastic stress singularities... much maligned and misunderstood. In: NAFEMS World Congress 2015, 2015-06-21 - 2015-06-24, California.
Caboni, Marco and Campobasso, M. Sergio and Minisci, Edmondo; (2015) Wind turbine design optimization under environmental uncertainty. In: Proceedings of the ASME Turbo Expo 2015. American Society of Mechanical Engineers (ASME), CAN. ISBN 9780791856802
Tuohy, Paul Gerard and Kim, Jae Min and Samuel, Aizaz and Peacock, Andrew D and Owens, Eddie and Dissanayake, Manjula and Corne, David and Galloway, Stuart and Stephen, Bruce and Sontonja, S. and Todoli, C. (2015) Orchestration of renewable generation in low energy buildings and districts using energy storage and load shifting. In: 6th International Building Physics Conference, IBPC15, 2015-06-14 - 2015-06-16.
Li, Junquan and Greenland, Steve and Clark, Craig and Post, Mark A. (2015) Microsatellite formation flying using pulsed plasma thruster and solar sailing at Earth Moon L4. In: 8th International Workshop on Satellite Constellations and Formation Flying, 2015-06-08 - 2015-06-10. (Unpublished)
Vetrisano, Massimo and Thiry, Nicolas and Vasile, Massimiliano; (2015) Detumbling large space debris via laser ablation. In: IEEE Aerospace Conference Proceedings. IEEE Computer Society Press, USA. ISBN 9781479953790
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf (2015) Regeneration of thermally recycled glass fibre for cost-effective closed-loop composite recycling in automotive. In: 26th Annual SICOMP Conference on Manufacturing and Design of Composites, 2015-06-01 - 2015-06-02.
Kakaie-Lafdaini, Mohammad Hadi and Ghadiri-Zahrani, Ismaeil and Galloway, Alexander (2015) Optimization study of weld geometry in the tandem submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (6). pp. 1068-1077. ISSN 2041-2975
Kersken, Matthias and Heusler, Ingo and Strachan, Paul and Sinnesbichler, Herbert (2015) Introduction of a new validation scenario for building energy simulation tools based on measurement data. Bauphysik, 37 (3). pp. 153-158. ISSN 1437-0980
Stickland, Matthew (2015) How lectures come to life : Strathclyde University Flight Test Course. Sailplane & Gliding, 66 (3). pp. 30-33. ISSN 0036-7235
Thomason, James (2015) Glass Fibre Sizing : A Review of Size Formulation Patents. Create Space Independent Publishing Platform. ISBN 978-0-9573814-3-8
Ure, James and Chen, Haofeng and Tipping, David (2015) Verification of the linear matching method for limit and shakedown analysis by comparison with experiments. Journal of Pressure Vessel Technology, 137 (3). 031003. ISSN 0094-9930
Wang, Sheng-Hui and Jiang, Jiaren and Stack, Margaret M. (2015) Methodology development for investigation of slurry abrasion corrosion by integrating an electrochemical cell to a miller tester. Journal of Bio- and Tribo-Corrosion, 1 (2). pp. 1-9. ISSN 2198-4220
Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2015) Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies. Composites Part A: Applied Science and Manufacturing, 72. pp. 75-84. ISSN 1359-835X
Giourntas, L. and Hodgkiess, T. and Galloway, A.M. (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. Wear, 332-333. pp. 1051-1058. ISSN 0043-1648
Liu, Haihu and Zhang, Yonghao and Valocchi, Albert J. (2015) Lattice Boltzmann simulation of immiscible fluid displacement in porous media : homogeneous versus heterogeneous pore network. Physics of Fluids, 27 (5). 052103. ISSN 1089-7666
Zografos, Konstantinos and Oliveira, Monica (2015) Designing methods of microfluidic devices focused on non-Newtonian fluids. In: 28th Scottish Fluid Mechanics Meeting, 2015-05-28 - 2015-05-28.
Tuohy, Paul Gerard (2015) IEQ Performance gaps : Failure modes, litigation risks, and the need for quality. In: Healthy Buildings Europe 2015, 2015-05-18 - 2015-05-20.
Feng, Jinglang and Noomen, Ron and Visser, Pieter N.A.M. and Yuan, Jianping (2015) Modeling and analysis of periodic orbits around a contact binary asteroid. Astrophysics and Space Science, 357 (2). ISSN 0004-640X
Stephenson, David and Lockerby, Duncan A. and Borg, Matthew K. and Reese, Jason M. (2015) Multiscale simulation of nanofluidic networks of arbitrary complexity. Microfluidics and Nanofluidics, 18 (5-6). pp. 841-858. ISSN 1613-4982
Campo-Deaño, Laura and Oliveira, Monica and Pinho, F.T. (2015) A review of computational hemodynamics in middle cerebral aneurysms and rheological models for blood flow. Applied Mechanics Reviews, 67 (3). 030801. ISSN 2379-0407
Colombo, Camilla and Alessi, Elisa Maria and van der Weg, Willem Johan and Soldini, Stefania and Letizia, Francesca and Vetrisano, Massimo and Vasile, Massimiliano and Rossi, Alessandro and Landgraf, Markus (2015) End-of-life disposal concepts for libration point orbit and highly elliptical orbit missions. Acta Astronautica, 110. pp. 298-312. ISSN 0094-5765
Heiligers, Jeannette and McInnes, Colin (2015) Solar sail heliocentric Earth-following orbits. Journal of Guidance, Control and Dynamics, 38 (5). pp. 937-944. ISSN 1533-3884
Meng, Jian-Ping and Zhang, Yonghao and Reese, Jason (2015) Numerical simulation of rarefied gas flows with specified heat flux boundary conditions. Communications in Computational Physics, 17 (5). pp. 1185-1200. ISSN 1815-2406
Yang, L. and Saez, E.R. and Nagel, U. and Thomason, J. (2015) Can thermally degraded glass fibre be regenerated for closed-loop recycling of thermosetting composites? Composites Part A: Applied Science and Manufacturing, 72. pp. 167-174. ISSN 1359-835X
Cairns, Jonathan and McPherson, Norman and Galloway, Alexander (2015) Using artificial neural networks to identify and optimise the key parameters affecting geometry of a GMAW fillet weld. In: 18th International Conference on Joining Materials, JOM-18, 2015-04-26 - 2015-04-29, Konventum LO-Skolen.
Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE analysis. In: 12th International Conference on Computational Methods & Experiments in Surface & Contact Mechanicsc including Tribology, 2015-04-21 - 2015-04-23, TRYP València Oceanic Hotel.
Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert; de Hosson, J.Th.M. and Hadfield, M. and Brebbia, C.A., eds. (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE-analysis. In: Surface Effects and Contact Mechanics including Tribology XII. WIT Transactions on Engineering Sciences, 91 . WIT Press, ESP, pp. 247-258. ISBN 978-1-84564-950-0
Jamieson, Jonathan and Biggs, James (2015) Path planning using concatenated analytically-defined trajectories for quadrotor UAVs. Aerospace, 2 (2). pp. 155-170. ISSN 2052-451X
Battista, Emmanuele and Dell' Agnello, Simone and Esposito, Giampiero and Simo, Jules (2015) Quantum effects on Lagrangian points and displaced periodic orbits in the Earth-Moon system. Physical Review D: Particles, Fields, Gravitation and Cosmology, 91 (8). 084041. ISSN 1550-2368
Kim, Jae Wook and Haeri, Sina (2015) An advanced synthetic eddy method for the computation of aerofoil-turbulence interaction noise. Journal of Computational Physics, 287. pp. 1-17. ISSN 0021-9991
Kokkinakis, Ioannis and Drikakis, D. (2015) Implicit large eddy simulation of weakly-compressible turbulent channel flow. Computer Methods in Applied Mechanics and Engineering, 287. pp. 229-261. ISSN 0045-7825
Rasool, G. and Mridha, S. and Stack, M.M. (2015) Mapping wear mechanisms for TiC/Ti composite coatings. Wear, 328-329. 498–508. ISSN 0043-1648
Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard (2015) Computational analysis to factor wind into the design of an architectural environment. Modelling and Simulation in Engineering, 2015. pp. 1-10. 234601. ISSN 1687-5605
Infante, Vincenzo and Haw, Mark and Oliveira, Monica (2015) Effect of flow conditions on the swimming efficiency of Dunaliella Salina in microfluidic contraction devices. In: 10th Annual European Rheology Conference, AERC 2015, 2015-04-14 - 2015-04-17.
Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. In: 20th International Conference on Wear of Materials, 2015-04-12 - 2015-04-16, The Sheraton Centre.
Calautit, John Kaiser and O'Connor, Dominic and Sofotasiou, Polytimi and Hughes, Ben Richard (2015) CFD simulation and optimisation of a low energy ventilation and cooling system. Computation, 3 (2). pp. 128-149. ISSN 1866-9964
Sadiq, Kamran and Stack, Margaret and Black, Richard Anthony (2015) Wear mapping of CoCrMo alloy in simulated bio-tribocorrosion conditions of a hip prosthesis bearing in calf serum solution. Materials Science and Engineering: C, 49. pp. 452-462. ISSN 0928-4931
Taylor, Ian and Robertson, Andrew Colin (2015) Numerical investigation of the coupled interaction between an unsteady aerodynamic flow field and a water film coating on a circular cylinder. Journal of Fluids and Structures, 54. pp. 312-331. ISSN 0889-9746
Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2015) A hybrid molecular-continuum method for unsteady compressible multiscale flows. Journal of Fluid Mechanics, 768. pp. 388-414. ISSN 0022-1120
Garcia Yarnoz, Daniel and Scheeres, Daniel J. and McInnes, Colin (2015) On the a and g families of orbits in the Hill problem with solar radiation pressure and their application to asteroids. Celestial Mechanics and Dynamical Astronomy, 121 (4). pp. 365-384. ISSN 0923-2958
Mushet, Garrie and Mingotti, Giorgio and Colombo, Camilla and McInnes, Colin (2015) Self-organising satellite constellation in geostationary Earth orbit. IEEE Transactions on Aerospace and Electronic Systems, 51 (2). pp. 910-923. ISSN 0018-9251
Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2015) Buckling and postbuckling of variable angle tow composite plates under in-plane shear loading. International Journal of Solids and Structures, 58. pp. 270-287. ISSN 0020-7683
Sadiq, K. and Black, R. A. and Stack, M. M. (2015) Bio-tribocorrosion – current concepts in micro-abrasion–corrosion mapping of CoCrMo alloy for hip replacement bearings. In: TriboUK 2015, 2015-04-16 - 2015-04-17, Loughborough University.
Zuiani, Federico and Vasile, Massimiliano (2015) Extended analytical formulas for the perturbed Keplerian motion under a constant control acceleration. Celestial Mechanics and Dynamical Astronomy, 121 (3). pp. 275-300. ISSN 0923-2958
Wang, Peng and Zhu, Lianhua and Guo, Zhaoli and Xu, Kun (2015) A comparative study of LBE and DUGKS methods for nearly incompressible flows. Communications in Computational Physics, 17 (3). pp. 657-681. ISSN 1815-2406
Peat, Tom and Galloway, Alexander and Marrocco, Tiziana and Iqbal, Naveed (2015) Microstructural evaluation of cold spray deposited WC with subsequent friction stir processing. In: TMS Annual Meeting and Exhibition, TMS2015, 2015-03-15 - 2015-03-19, Florida.
Toumpis, Athanasios and Galloway, Alexander and Polezhayeva, Helena and Molter, Lars (2015) Fatigue assessment of friction stir welded DH36 steel. In: TMS Annual Meeting and Exhibition, TMS2015, 2015-03-15 - 2015-03-19, Florida.
Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew (2015) Two-beam lidar measurements in a non-homogeneous wind field. In: EWEA Offshore 2015, 2015-03-10 - 2015-03-12.
Mehta, Piyush and Minisci, Edmondo and Vasile, Massimiliano and Walker, Andrew C. and Brown, Melrose (2015) An open source hypersonic aerodynamic and aerothermodynamic modelling tool. In: 8th European Symposium on Aerothermodynamics for Space Vehicles, 2015-03-02 - 2015-03-06.
Scanlon, Thomas and Cassineli Palharini, Rodrigo and White, Craig and Espinoza, Daniel and Casseau, Vincent (2015) Simulations of rarefied and continuum hypersonic flow over re-entry objects. In: 8th European Symposium on Aerothermodynamics for Space Vehicles, 2015-03-02 - 2015-03-06.
Heiligers, Jeannette and Mingotti, Giorgio and McInnes, Colin (2015) Optimal solar sail transfers between halo orbits of different sun-planet systems. Advances in Space Research, 55 (5). pp. 1405-1421. ISSN 0273-1177
Locatelli, Marco and Vasile, Massimiliano (2015) (Non) convergence results for the differential evolution method. Optimization Letters, 9 (3). pp. 413-425. ISSN 1862-4472
Holland, David M. and Lockerby, Duncan A. and Borg, Matthew K. and Nicholls, William D. and Reese, Jason M. (2015) Molecular dynamics pre-simulations for nanoscale computational fluid dynamics. Microfluidics and Nanofluidics, 18 (3). pp. 461-474. ISSN 1613-4982
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2015) A CFD study on the mechanisms which cause cavitation in positive displacement reciprocating pumps. Journal of Hydraulic Engineering, 1 (1). pp. 47-59. ISSN 2332-8215
Macdonald, Malcolm and McInnes, Colin and Bewick, Charlotte and Visagie, Lourens and Lappas, Vaios and Erb, Sven (2015) Concept-of-operations disposal analysis of spacecraft by gossamer structure. Journal of Spacecraft and Rockets. pp. 517-525. ISSN 0022-4650
Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Damage analysis of pseudo-ductile thin-ply UD hybrid composites - a new analytical method. Composites Part A: Applied Science and Manufacturing, 69. pp. 83-93. ISSN 1359-835X
Toumpis, Athanasios and Galloway, Alexander and Polezhayeva, Helena and Molter, Lars; Mishra, Rajiv S. and Mahoney, Murray W. and Sato, Yakuta and Hovanski, Yuri, eds. (2015) Fatigue assessment of friction stir welded DH36 steel. In: Friction Stir Welding and Processing VIII. John Wiley & Sons, Ltd., USA, pp. 11-20. ISBN 9781119082491
Agimelen, Okpeafoh S. and Hamilton, Peter and Haley, Ian and Nordon, Alison and Vasile, Massimiliano and Sefcik, Jan and Mulholland, Anthony J. (2015) Estimation of particle size distribution and aspect ratio of non-spherical particles from chord length distribution. Chemical Engineering Science, 123. pp. 629-640. ISSN 0009-2509
Clarke, Joseph Andrew (2015) A vision for building performance simulation : a position paper prepared on behalf of the IBPSA Board. Journal of Building Performance Simulation, 8 (2). pp. 39-43. ISSN 1940-1493
Narayanan, S. and Chaitanya, P. and Haeri, S. and Joseph, P. and Kim, J. W. and Polacsek, C. (2015) Airfoil noise reductions through leading edge serrations. Physics of Fluids, 27 (2). 025109. ISSN 1089-7666
Jenkins, P. G. and Yang, Liu and Liggat, John and Thomason, James (2015) Investigation of the strength loss of glass fibre after thermal conditioning. Journal of Materials Science, 50 (3). pp. 1050-1057. ISSN 0022-2461
Sofotasiou, Polytimi and Hughes, Benjamin Richard and Calautit, John Kaiser (2015) Qatar 2022 : facing the FIFA world cup climatic and legacy challenges. Sustainable Cities and Society, 14 (1). pp. 16-30. ISSN 2210-6707
Baker, Neville (2015) The role of zirconium in microalloyed steels. Materials Science and Technology, 31 (3). pp. 265-294. ISSN 0267-0836
Clarke, Joseph Andrew and Hand, Jon and Kim, Jae-min and Samuel, Aizaz and Svehla, Katalin (2015) Performance of actively controlled domestic heat storage devices in a smart grid. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (1). pp. 99-110. ISSN 0957-6509
Doutel, E. and Carneiro, J. and Oliveira, Monica and Campos, J.B.L.M. and Miranda, J.M. (2015) Fabrication of 3D mili-scale channels of hemodynamic studies. Journal of Mechanics in Medicine and Biology, 15 (1). 1550004. ISSN 0219-5194
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2015) Alternating orbiter strategy for asteroid exploration. Journal of Guidance, Control and Dynamics, 38 (2). pp. 280-291. ISSN 1533-3884
Hamilton, Niall Robert and Wood, James and Easton, David and Olsson Robbie, Mikael and Zhang, Yuxuan and Galloway, Alexander (2015) Thermal autofrettage of dissimilar material brazed joints. Materials and Design, 67. pp. 405-412. ISSN 0261-3069
Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2015) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part II - microstructure and hardness. Materials Science and Technology, 31 (3). pp. 355-360. ISSN 0267-0836
Mridha, Shahjahan and Baker, Neville (2015) Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces. Materials Science and Technology, 31 (3). pp. 337-343. ISSN 0267-0836
Verrier, Patricia and McInnes, Colin (2015) Low-energy capture of asteroids onto KAM tori. Journal of Guidance, Control and Dynamics, 38 (2). pp. 330-334. ISSN 1533-3884
Tuohy, Paul G. and Murphy, Gavin B. (2015) Closing the gap in building performance : learning from BIM benchmark industries. Architectural Science Review, 58 (1). pp. 47-56. ISSN 0003-8628
Tuohy, Paul Gerard and Murphy, Gavin Bruce (2015) Are current design processes and policies delivering comfortable low carbon buildings? Architectural Science Review, 58 (1). pp. 39-46. ISSN 0003-8628
Wu, Lei and White, Craig and Scanlon, Thomas J. and Reese, Jason M. and Zhang, Yonghao (2015) A kinetic model of the Boltzmann equation for non-vibrating polyatomic gases. Journal of Fluid Mechanics, 763. pp. 24-50. ISSN 1469-7645
Di Carlo, Marilena and Ortiz Gómez, Natalia and Romero Martin, Juan Manuel and Tardioli, Chiara and Gachet, Fabien and Kumar, Kartik and Vasile, Massimiliano (2015) Optimized low-thrust mission to the Atira asteroids. In: 25th AAS/AIAA Space Flight Mechanics Meeting, 2015-01-11 - 2015-01-15.
Kerr, Emma and Macdonald, Malcolm (2015) A general perturbations method for spacecraft lifetime analysis. In: 25th AAS/AIAA Space Flight Mechanics Meeting, 2015-01-11 - 2015-01-15.
Simo, Jules and Furfaro, Roberto and Mueting, Joel (2015) Performance evaluation of artificial neural network-based shaping algorithm for planetary pinpoint guidance. In: 25th AAS/AIAA Space Flight Mechanics Meeting, 2015-01-11 - 2015-01-15.
Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M.; (2015) Buckling analysis and optimization of blade stiffened variable stiffness panels. In: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc., USA. ISBN 9781624103421
Calautit, John Kaiser and Hughes, Ben Richard and O'Connor, Dominic and Shahzad, Sally Salome (2015) CFD and wind tunnel study of the performance of a multi-directional wind tower with heat transfer devices. Energy Procedia, 75. pp. 1692-1697. ISSN 1876-6102
Lin, C. and Gillespie, J. and Schuder, M. D. and Duberstein, W. and Beverland, I. J. and Heal, M. R. (2015) Evaluation and calibration of Aeroqual series 500 portable gas sensors for accurate measurement of ambient ozone and nitrogen dioxide. Atmospheric Environment, 100. pp. 111-116. ISSN 1352-2310
Liu, Haihu and Zhang, Yonghao (2015) Modelling thermocapillary migration of a microfluidic droplet on a solid surface. Journal of Computational Physics, 280. pp. 37-53. ISSN 0021-9991
Andrews, N. and Giourntas, L. and Galloway, A. M. and Pearson, A. (2015) Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316. International Journal of Refractory Metals and Hard Materials, 48. pp. 229-237. ISSN 0263-4368
Borggrafe, Andreas and Heiligers, Jeannette and McInnes, Colin and Ceriotti, Matteo (2015) Attitude dynamics of classical dumbbell problem with solar radiation pressure. Journal of Guidance, Control and Dynamics, 38 (1). pp. 168-173. ISSN 1533-3884
Campbell, Stuart and Ley, F.H. and Galloway, Alexander and McPherson, Norman (2015) Artificial neural network optimisation of shielding gas flow rate in gas metal arc welding subjected to cross drafts when using alternating shielding gases. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (1). pp. 122-129. ISSN 2041-2975
Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2015) Comparison of the linear matching method to Rolls Royce's hierarchical finite element framework for ratchet limit analysis. International Journal of Pressure Vessels and Piping, 125. pp. 13-22. ISSN 0308-0161
Tingey, Christopher and Galloway, Alexander and Toumpis, Athanasios and Cater, Stephen R. (2015) Effect of tool centreline deviation on the mechanical properties of friction stir welded DH36 steel. Materials and Design, 65. pp. 896-906. ISSN 0261-3069
Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2015) Damage assessment based on general signal correlation : Application for delamination diagnosis in composite structures. European Journal of Mechanics - A/Solids, 49. pp. 197-204. ISSN 0997-7538
Zhang, Qingbin and Feng, Zhiwei and Tang, Qiangang and Macdonald, Malcolm (2015) A spline wavelet collection method for the optimal control of flexible spacecraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 299 (1). pp. 163-171. ISSN 0954-4100
Baker, Thomas (2015) Microalloyed steels. Ironmaking and Steelmaking. ISSN 1743-2812
Han, Yu and Biggs, James and Cui, Naigang (2015) Adaptive flault-tolerant control of spacecraft attitude dynamics with actuator failures. Journal of Guidance, Control and Dynamics. ISSN 1533-3884
McGinty, Sean and McKee, Sean and McCormick, Christopher and Wheel, Marcus (2015) Release mechanism and parameter estimation in drug-eluting stent systems : analytical solutions of drug release and tissue transport. Mathematical Medicine and Biology, 32 (2). pp. 163-186. ISSN 1477-8599
Song, Zhiming and Wang, Maocai and Dai, Guangming and Vasile, Massimiliano (2015) A novel multiobjective evolutionary algorithm based on regression analysis. Scientific World Journal, 2015. 439307. ISSN 2356-6140
Wang, Maocai and Song, Zhiming and Dai, Guangming and Peng, Lei and Zheng, Chang (2015) Asteroids exploration trajectory optimal design with differential evolution based on mixed coding. International Journal of Distributed Sensor Networks, 2015. 827987. ISSN 1550-1329
Zhou, Xingguo and Mackenzie, Donald and Pan, Wenke (2015) A new distributed cooling method for mitigating residual stress in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975
2014
Haeri, S. and Shrimpton, J.S. (2014) Fully resolved simulation of particle deposition and heat transfer in a differentially heated cavity. International Journal of Heat and Fluid Flow, 50. pp. 1-15. ISSN 0142-727X
Rasool, Ghulam and Stack, Margaret (2014) Mapping the role of Cr content in dry sliding of steels : comparison between maps for material and counterface. Tribology International, 80. 49–57. ISSN 0301-679X
Infante, Vincenzo and Haw, Mark and Oliveira, Monica (2014) Behaviour of Dunaliella Salina in microfluidic contraction devices. In: British Society of Rheology Midwinter Meeting, 2015-12-14 - 2015-12-15, Lindisfarne Centre.
Garćia, David and Trendafilova, Irina (2014) A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment : application for delamination detection in a composite beam. Journal of Sound and Vibration, 333 (25). pp. 7036-7050. ISSN 0022-460X
Hand, Jon and Kelly, Nicolas and Samuel, Aizaz (2014) Modelling the impact of integrated electric vehicle charging and domestic heating strategies on future energy demands. In: 9th International Conference on System Simulation in Buildings, SSB2014, 2014-12-10 - 2014-12-12.
Pagnozzi, Daniele and Biggs, James; (2014) Dynamical analysis of an orbiting three-rigid-body system. In: Proceedings of the 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences (ICNPAA 14). AIP Conference Proceedings, 1637 . American Institute of Physics, NOR, pp. 786-795. ISBN 978-0-7354-1276-7
Zamaro, Mattia and Biggs, James; (2014) Dynamical systems techniques for designing libration point orbits in proximity of highly-inhomogeneous planetary satellites : Application to the Mars-Phobos elliptic three-body problem with additional gravity harmonics. In: Proceedings of the 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences (ICNPAA 14). AIP Conference Series, 1637 . American Institute of Physics, NOR, pp. 1228-1240. ISBN 978-0-7354-1276-7
Wu, Lei and White, Craig and Scanlon, Thomas J. and Reese, Jason M. and Zhang, Yonghao; Fan, Jing, ed. (2014) Coherent Rayleigh-Brillouin scattering : influence of the intermolecular potential. In: Proceedings of the 29th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings Series, 1628 . American Institute of Physics, CHN, pp. 648-652. ISBN 9780735412651
Peacock, Andrew D and Owens, E.H. and Roaf, Sue and Corne, D.W. and Dissanayake, M. and Tuohy, Paul Gerard and Stephen, Bruce and Galloway, Stuart (2014) Autarkic energy systems : balancing supply and demand with energy storage and controls in local energy micro-grids. In: 2014 Asia-Pacific Solar Research Conference, 2014-12-08 - 2014-12-10, New South Wales.
Mridha, Shahjahan and Amuda, M.O.H. (2014) Exploratory study of sensitization in cryogenically cooled ferritic stainless steel welds. International Journal of Corrosion, 2014. 707465. ISSN 1687-9333
Andrews, Nicola and Giourntas, L. and Galloway, A. M. and Pearson, A. (2014) Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316. Wear, 320 (1-2). pp. 143-151. ISSN 0043-1648
Docherty, Stephanie and Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2014) Multiscale simulation of heat transfer in a rarefied gas. International Journal of Heat and Fluid Flow, 50. pp. 114-125. ISSN 0142-727X
Gorash, Yevgen and Mackenzie, Donald (2014) Cyclic yield strength in definition of design limits for fatigue and creep. Proceedings in Applied Mathematics and Mechanics, PAMM, 14 (1). pp. 365-366. ISSN 1617-7061
Lowe, C. J. and Macdonald, M. (2014) Rapid model-based inter-disciplinary design of a CubeSat mission. Acta Astronautica, 105 (1). pp. 321-332. ISSN 0094-5765
Maltin, Charles and Nolton, Lauren J. and Scott, Jamie L. and Toumpis, Athanasios I. and Galloway, Alexander M. (2014) The potential adaptation of stationary shoulder friction stir welding technology to steel. Materials and Design, 64. pp. 614-624. ISSN 0261-3069
Verrier, Patricia and Waters, Thomas and Sieber, Jan (2014) Evolution of the L1 halo family in the radial solar sail CRTBP. Celestial Mechanics and Dynamical Astronomy, 120 (4). pp. 373-400. ISSN 0923-2958
Galindo-Rosales, Francisco J. and Campo-Deaño, Laura and Sousa, Patrícia C. and Ribeiro, Vera M. and Oliveira, Mónica S. N. and Alves, Manuel A. and Pinho, Fernando T. (2014) Viscoelastic instabilities in microscale flows. Experimental Thermal and Fluid Science, 59. pp. 128-139. ISSN 0894-1777
Brodie, Robbie (2014) Computer-implemented method of simulating performance of e.g. endovascular stent-graft, involves partitioning model such that material models simulate material behaviour in units of object model of super elastic tension and compression. WO 2014184591-A1 WOGB 051533.
Mridha, Shahjahan and Baker, Neville (2014) Oxidation protection behaviour of titanium aluminide coatings develped by TIG technique. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Atlantis the Palm.
Munoz De Escalona, Patricia and Mridha, Shahjahan and Baker, neville (2014) Effect of shielding gas on the properties and microstructure of melted steel surface using a TIG torch. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Atlantis the Palm.
Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio; Greiner, D. and Galván, B. and Periaux, J. and Gauger, N. and Giannakoglou, K.C. and Winter, G., eds. (2014) Robust aerodynamic design optimization of horizontal axis wind turbine rotors. In: Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences. Computational Methods in Applied Sciences . Springer Netherland, ESP, pp. 225-240. ISBN 9783319115405
Macdonald, Malcolm and Anderson, Pamela and Carrea, Laura and Dobke, Benjamin and Embury, Owen and Merchant, Chris and Bensi, Paolo; Meynart, R. and Neeck, S.P. and Shimoda, H., eds. (2014) Concepts for a geostationary-like polar missions. In: Sensors, Systems and Next-Feneration Satellites XVIII. SPIE--The International Society for Optical Engineering., NLD. ISBN 9781628413045
Uzzaman, Asraf and Wrzesien, Andrzej and Hamilton, Robert and Lim, James B.P. and Nash, David (2014) Numerical investigation of cold-formed steel top-hat purlins. In: 22nd Specialty Conference on Cold-Formed Steel Structures, CCFSS 2014, 2014-11-05 - 2014-11-06, Missouri.
Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi and Poletz, Nicolas (2014) Thermomechanical deformation behaviour of DH36 steel during friction stir welding by experimental validation and modelling. Science and Technology of Welding and Joining, 19 (8). pp. 653-663. ISSN 1362-1718
Zhang, Yuxuan and Galloway, Alexander and Wood, James and Olsson Robbie, Mikael and Easton, David and Zhu, Wenzhong (2014) Interfacial metallurgy study of brazed joints between tungsten and fusion related materials for divertor design. Journal of Nuclear Materials, 454 (1-3). pp. 207-216. ISSN 0022-3115
van der Weg, Willem Johan and Vasile, Massimiliano (2014) Sun–Earth L1 and L2 to Moon transfers exploiting natural dynamics. Celestial Mechanics and Dynamical Astronomy, 120 (3). pp. 287-308. ISSN 0923-2958
Anderson, Pamela and Macdonald, Malcolm and Dobke, Benjamin (2014) A geostationary equivalent Polar observation system. In: 12th Reinventing Space Conference, 2014-11-18 - 2014-11-21.
McInnes, Colin (2014) Approximate closed-form solution for solar sail spiral trajectories with sail degradation. Journal of Guidance, Control and Dynamics, 37 (6). pp. 2053-2057. ISSN 1533-3884
Mingotti, G. and Sánchez, J. P. and McInnes, C. R. (2014) Combined low-thrust propulsion and invariant manifold trajectories to capture NEOs in the Sun–Earth circular restricted three-body problem. Celestial Mechanics and Dynamical Astronomy, 120 (3). pp. 309-336. ISSN 0923-2958
Sinn, Thomas and Hilbich, Daniel and Vasile, Massimiliano (2014) Inflatable shape changing colonies assembling versatile smart space structures. Acta Astronautica, 104 (1). pp. 45-60. ISSN 0094-5765
Deng, Zhongmin and Bi, Sifeng and Sez, Atamturktur (2014) Stochastic model updating using distance discrimination analysis. Chinese Journal of Aeronautics, 27 (5). pp. 1188-1198. ISSN 1000-9361
Kelly, Nick and Sasso, M. and Angrisani, G. and Roselli, C. (2014) Impact of microgeneration systems on the low-voltage electricity grid. Technische Universität München, Germany.
Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen and McPherson, Norman (2014) Development of a process envelope for friction stir welding of DH36 steel : a step change. Materials and Design, 62. pp. 64-75. ISSN 0261-3069
Kelly, Nicolas J. and Tuohy, Paul G. and Hawkes, Adam D. (2014) Performance assessment of tariff-based air source heat pump load shifting in a UK detached dwelling featuring phase change-enhanced buffering. Applied Thermal Engineering, 71 (2). pp. 809-820. ISSN 1359-4311
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2014) An advanced CFD model to study the effect of non-condensable gas on cavitation in positive displacement pumps. In: 11th International Symposium on Compressor and Turbine Flow Systems Theory and Application Areas, 2014-10-20 - 2014-10-23.
Lopez, Alejandro and Stickland, Matthew and Dempster, William (2014) Modelling erosion in a centrifugal pump in an Eulerian-Lagrangian frame using OpenFOAM®. In: 11th International Symposium on Compressor and Turbine Flow Systems Theory and Application Areas, 2014-10-20 - 2014-10-23.
Stickland, Matthew and Oldroyd, Andrew and Bay Hasager, Charlotte (2014) EU-Norsewind : delivering offshore wind speed data for renewable energy. In: 11th International Symposium on Compressor and Turbine Flow Systems Theory and Application Areas, 2014-10-20 - 2014-10-23.
Angling, M.J. and Kirkby, G. and Harkness, P. and McRobb, M. and Vasile, M. and Sinn, T.; (2014) The wideband ionospheric sounder cubesat experiment (WISCER). In: 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS). IEEE, CHN, pp. 1-4. ISBN 9781467352253
Li, Junquan and Greenland, Steve and Post, Mark and Coletti, Michele (2014) A highly miniaturized uPPT thruster for attitude-orbit control. In: 6th European CubeSat Symposium, 2014-10-14 - 2014-10-16.
Brown, Richard (2014) The future of air travel : Dinner in Sydney, London in time for 'The X-Factor'? The Washington Post, Washington DC.
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf (2014) The ReCoVer Project : regeneration of thermally recycled glass fibre for cost-effective composite recycling. In: SAMPE-ACMA Composites Conference and Exposition, CAMX 2014, 2014-10-13 - 2014-10-16.
McCombes, Tom and Grant, Andrew and Johnstone, Cameron and Brown, Richard (2014) An unsteady hydrodynamic model for tidal current turbines. PhD thesis, Mechanical And Aerospace Engineering.
Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew (2014) Variations in offshore wind turbine wake profiles with different inflow conditions of non-wake-affected upstream wind. In: 14th EMS Annual Meeting & 10th European Conference on Applied Climatology, ECAC, 2014-10-06 - 2014-10-10.
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2014) A CFD study on design parameters acting in cavitation of positive displacement pump. In: 12th European Fluid Machinery Congress, 2014-10-06 - 2014-10-07, Caledonian Hilton.
Lopez, Alejandro and Stickland, Matthew and Dempster, William (2014) Comparative study different erosion models in an Eulerian-Lagrangian frame using Open Source software. In: 12th European Fluid Machinery Congress, 2014-10-06 - 2014-10-07, Caledonian Hilton.
McGrath, Ciara and Macdonald, Malcolm (2014) Analytical three-phase transfer to a solar polar orbit using solar sail propulsion. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
McGrath, Ciara and Macdonald, Malcolm (2014) Scientific mission to a solar polar orbit using solar sail propulsion. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
McRoberts, Fraser and Harrower, Callum and Hutchison, Blair and Law, Wai Get and McLean, Frazer and McGrath, Ciara (2014) Design of main propulsion system for a reusable suborbital rocket. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Clark, Ruaridh and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and Pierce, Stephen and Macdonald, Malcolm and Bolton, Gregour; (2014) 3D model generation using an airborne swarm. In: E-Book of Abstracts 41st Annual Review of Progress in Quantitative Nondestructive Evaluation Conference. Iowa State University, USA.
Mahdavi, Amir-Mehran and Le, Nam TP and Roohi, Ehsan and White, Craig (2014) Thermal rarefied gas flow investigations through micro/nano backward-facing step : Comparison of DSMC and CFD subject to hybrid slip and jump boundary conditions. Numerical Heat Transfer Part A: Applications, 66 (7). pp. 733-755. ISSN 1040-7782
O'Connor, Dominic and Calautit, John Kaiser and Hughes, Ben Richard (2014) A study of passive ventilation integrated with heat recovery. Energy and Buildings, 82. pp. 799-811. ISSN 0378-7788
Alicino, Simone and Vasile, Massimiliano (2014) Evidence-based preliminary design of spacecraft. In: 6th International Conference on Systems & Concurrent Engineering for Space Applications. SECESA 2014, 2014-10-08 - 2014-10-10.
Alicino, Simone and Vasile, Massimiliano (2014) Evidence-based preliminary design of spacecraft. In: 6th International Conference on Systems & Concurrent Engineering for Space Applications. SECESA 2014, 2014-10-08 - 2014-10-10, Stuttgart.
Heiligers, Jeannette and McInnes, Colin (2014) New families of Sun-centred non-Keplerian orbits over cylinders and spheres. Celestial Mechanics and Dynamical Astronomy, 120 (2). pp. 163-194. ISSN 0923-2958
Patel, P and Mridha, Shahjahan and Baker, neville (2014) Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique. Materials Science and Technology, 30 (12). pp. 1506-1514. ISSN 0267-0836
Vasile, Massimiliano and Gibbings, Alison and Watson, Ian A. and Hopkins, John-Mark (2014) Improved laser ablation model for asteroid deflection. Acta Astronautica, 103. pp. 382-394. ISSN 0094-5765
Vasile, Massimiliano and Alicino, Simone (2014) An approach for the robust design of the power systems of small satellites. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Toronto. (Unpublished)
Biggs, James and Horri, Nadjim (2014) An exponentially fast attitude tracking controller on the rotation group. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Attitude control of large gossamer spacecraft using surface reflectivity modulation. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Colombo, Camilla and Mingotti, Giorgio and Bernelli-Zazzara, Franco and McInnes, Colin (2014) Multiple-spacecraft transfers to Sun-Earth distant retrograde orbits for asteroid detection missions. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Garcia Yarnoz, Daniel and McInnes, Colin (2014) Coupled orbit-attitude dynamics of a captured asteroid during swing-bys. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Heiligers, Jeannette and Hiddink, Sander and Noomen, Ron and McInnes, Colin (2014) Solar sail periodic orbits in the Earth-Moon three-body problem. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Parry, Thomas and Brown, Roy Hutton and Hammond, Paul and Clark, Ruaridh and Garcia Yarnoz, Daniel (2014) Deployable structures demonstrator StrathSat-R : A second chance. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Romero Martin, Juan Manuel and Masi, Luca and Vasile, Massimiliano and Minisci, Edmondo and Epenoy, Richard and Martinot, Vincent and Fontdecaba Baig, Jordi (2014) Incremental planning of multi-gravity assist trajectories. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Sinn, Thomas (2014) Smart shape changing structures for space based solar power applications. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Vasile, Massimiliano and Alicino, Simone (2014) An approach for the robust design of the power systems of small satellites. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Zamaro, Mattia and Biggs, James (2014) Identification of new orbits to enable future mission opportunities for the human exploration of the martian moon Phobos. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Kersken, Matthias and Heusler, Ingo and Strachan, Paul (2014) Erstellung eines neuen, messdatengestützten validierungsszenarios für gebaüde-simulationsprogramme. In: 5th German-Austrian IBPSA Conference, BauSIM 2014, 2014-09-22 - 2014-09-24.
Alshaikh, Moftah S. and Dempster, William (2014) A CFD study on two-phase frozen flow of air/water through a safety relief valve. In: 13th International Conference on Multiphase Flow in Industrial Plants, MFIP13, 2014-09-16 - 2014-09-19, Genoa.
Thiry, Nicolas and Vasile, Massimiliano; Taylor, Edward W. and Cardimona, David A., eds. (2014) Recent advances in laser ablation modelling for asteroid deflection methods. In: Proceedings of SPIE - The International Society for Optical Engineering. SPIE--The International Society for Optical Engineering., GBR. ISBN 9781628412536
Masi, Luca and Vasile, Massimiliano; (2014) A multidirectional Physarum solver for the automated design of space trajectories. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., GBR, pp. 2992-2999. ISBN 978-1-4799-6626-4
Chen, Haofeng and Chen, Weihang and Ure, James (2014) A direct method on the evaluation of cyclic steady state of structures with creep effect. Journal of Pressure Vessel Technology, 136 (6). 161404. ISSN 0094-9930
Garcia, David and Trendafilova, Irina (2014) Singular spectrum analysis for identifying structural nonlinearity using free-decay responses : Application detection and diagnosis in composite laminates. In: 26th International Conference on Noise and Vibration Engineering, 2014-09-15 - 2014-09-17.
Palazzetti, R. and Garcia, D. and Trendafilova, I. and Fiorini, C. and Zucchelli, A.; (2014) An investigation in vibration modeling and vibration-based monitoring for composite laminates. In: Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics. KU Leuven, GBR, pp. 3819-3828. ISBN 9789073802919
Kelly, Nicolas and Samuel, Aizaz and Tuohy, Paul Gerard (2014) Development of a detailed simulation model to support evaluation of water-loadshifting across a range of use patterns. In: International Conference of Enhanced Building Operations, ICEBO 2014, 2014-09-14 - 2014-09-17.
Alicino, Simone and Vasile, Massimiliano (2014) Analysis of two algorithms for multi-objective min-max optimization. In: Bio-inspired Optimization Methods and their Applications, BIOMA 14, 2014-09-13 - 2014-09-13.
Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo (2014) Multi-population adapative inflationary differential evolution. In: Bio-inspired Optimization Methods and their Applications, BIOMA 14, 2014-09-13 - 2014-09-13.
Riccardi, Annalisa and Fernández-Navarro, Francisco and Carloni, Sante (2014) Cost-sensitive adaboost algorithm for ordinal regression based on extreme learning machine. IEEE Transactions on Cybernetics, 44 (10). pp. 1898-1909. ISSN 2168-2275
Borggrafe, Andreas and Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2014) Distributed reflectivity solar sails for extended mission applications. In: 3rd International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13.
Flett, Graeme Hamilton and Kelly, Nicolas (2014) Towards detailed occupancy and demand modelling of low-carbon communities. In: 1st International Conference on Zero Carbon Buildings Today and in the Future, ZCB2014,, 2014-09-11 - 2014-09-12, Birmingham City University.
Heiligers, Jeannette and McInnes, Colin (2014) New families of non-Keplerian orbits : Solar sail motion over cylinders and spheres. In: 3rd International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13.
Sayer, Philip and Thomson, Avril and McLaren, Andrew and Little, Derek; (2014) Supporting the STEM transition between school and university. In: DS 78. The Design Society, NLD, pp. 408-513. ISBN 9781904670568
Lappa, Marcello (2014) The patterning behaviour and accumulation of spherical particles in a vibrated non-isothermal liquid. Physics of Fluids, 26 (9). 093301. ISSN 1070-6631
Cassineli Palharini, Rodrigo and Scanlon, Thomas (2014) Atmospheric reentry modelling using an open source DSMC code. PhD thesis, University Of Strathclyde.
Cassineli Palharini, Rodrigo and Scanlon, Thomas and Reese, Jason (2014) Aerothermodynamic comparison of two- and three-dimensional rarefied hypersonic cavity flows. Journal of Spacecraft and Rockets, 51 (5). pp. 1619-1630. ISSN 0022-4650
Ceriotti, Matteo and McInnes, Colin (2014) Design of ballistic three-body trajectories for continuous polar Earth observation in the Earth-Moon system. Acta Astronautica, 102. pp. 178-189. ISSN 0094-5765
Sayer, Philip and Thomson, Avril and McLaren, Andrew (2014) Supporting the STEM transition between school and university. In: Engineering Design & Production Education, EPDE, 2014-09-04 - 2014-09-05. (In Press)
Zhang, Jun; (2014) Two critical issues in Langevin simulation of gas flows. In: Rarefied Gas Dynamics 2014. AIP Conference Proceedings, 1328 . American Institute of Physics, CHN, pp. 1087-1094. ISBN 978-0-7354-1265-1
Sharpe, Tim and McQuillan, Jonathan and Howieson, Stirling and Farren, Paul and Tuohy, Paul (2014) Investigation of Occupier Influence on Indoor Air Quality in Dwellings. Scottish Government, Edinburgh.
Sharpe, Tim and McQuillan, Jonathon and Howieson, Stirling and Farren, Paul and Tuohy, Paul Gerard (2014) Research Project to Investigate Occupier Influence on Indoor Air Quality in Dwellings. The Scottish Government, Livingston.
Verrier, Patricia and McInnes, Colin (2014) Periodic orbits for 3 and 4 co-orbital bodies. Monthly Notices of the Royal Astronomical Society, 442 (4). pp. 3179-3191. ISSN 0035-8711
Sadiq, K. and Black, R.A. and Stack, M.M. (2014) Bio-tribocorrosion mechanisms in orthopaedic devices : mapping the micro-abrasion-corrosion behaviour of a simulated CoCrMo hip replacement in calf serum solution. Wear, 316 (1-2). 58–69. ISSN 0043-1648
Schnier, Gladys and Wood, James and Galloway, Alexander (2014) Investigating the effects of process variables on the residual stresses of weld and laser cladding. Advanced Materials Research, 996. pp. 481-487. ISSN 1022-6680
Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.
Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 8 (8). pp. 651-655. ISSN 2010-3778
Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Camilleri, Duncan and Micallef, Daniel (2014) Modelling magnetohydrodynamics to investigate variation of shielding gases on arc characteristics in the GTAW process. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.
Garcia Yarnoz, Daniel and Scheeres, Daniel J. and McInnes, Colin (2014) On the a and g families of symmetric periodic orbits in the photo-gravitational hill problem and their application to asteroids. In: AIAA/AAS Astrodynamics Specialist Conference 2014, 2014-08-04 - 2014-08-07, California.
Grey, Stuart and Ziebart, Marek; (2014) Developments in high fidelity surface force models and their relative effects on orbit prediction. In: AIAA/AAS Astrodynamics Specialist Conference. AIAA SPACE Forum . AIAA, USA. ISBN 9781624103087
Heiligers, Jeannette and Diedrich, Benjamin and Derbes, Bill and McInnes, Colin (2014) Sunjammer : Preliminary end-to-end mission design. In: AIAA/AAS Astrodynamics Specialist Conference 2014, 2014-08-04 - 2014-08-07, California.
Mingotti, Giorgio and Heiligers, Jeannette and McInnes, Colin (2014) Optimal solar sail interplanetary heteroclinic transfers for novel space applications. In: AIAA/AAS Astrodynamics Specialist Conference 2014, 2014-08-04 - 2014-08-07, California.
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2014) A computational fluid dynamics model to evaluate the inlet stroke performance of a positive displacement reciprocating plunger pump. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 228 (5). pp. 574-584. ISSN 0957-6509
Stephenson, Dave and Lockerby, Duncan A. and Borg, Matthew K. and Reese, Jason M.; (2014) Multiscale simulation of nano-fluidic networks. In: ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting. ASME. ISBN 978-0-7918-4627-8
Chen, Haofeng and Ure, James and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 2 : Application and verification. International Journal of Pressure Vessels and Piping, 120-121. pp. 152-161. ISSN 0308-0161
Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2014) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part I - melt features. Materials Science and Technology, 30 (10). pp. 1209-1213. ISSN 0267-0836
Loughlan, J. and Nash, David and Rhodes, James (2014) Coupled instabilities in metal structures. Thin-Walled Structures, 81. ISSN 0263-8231
Ure, James and Chen, Haofeng and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 1 : Software development. International Journal of Pressure Vessels and Piping, 120-121. pp. 141-151. ISSN 0308-0161
Fabre, S. and Stickland, M. and Scanlon, T. and Oldroyd, A. and Kindler, D. and Quail, F. (2014) Measurement and simulation of the flow field around the FINO 3 triangular lattice meteorological mast. Journal of Wind Engineering and Industrial Aerodynamics, 130. pp. 99-107. ISSN 0167-6105
Holmes, D. and Sharifi, S. and Stack, M. M. (2014) Tribo-corrosion of steel in artificial saliva. Tribology International, 75. pp. 80-86. ISSN 0301-679X
Clark, Ruaridh and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and Pierce, Gareth and Macdonald, Malcolm (2014) Autonomous swarm testbed with multiple quadcopters. In: 1st World Congress on Unmanned Systems Enginenering, 2014-WCUSEng, 2014-07-30 - 2014-08-01.
Beesley, Ross and Chen, Haofeng and Hughes, Martin (2014) On the cyclic J-integral of a 3D semi elliptical surface crack. In: ASME Pressure Vessels and Piping Conference 2014, 2014-07-20 - 2014-07-24, California.
Iannetti, Aldo and Stickland, Matthew and Dempster, William (2014) An investigation of the performance of a positive displacement reciprocating pump at low pressure NPSH incorporating a three phase cavitation model. In: 11th World Congress on Computational Mechanics, WCCMXI, 2014-07-20 - 2014-07-25, The Palace of Congresses of Catalonia.
Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2014) Ratchet analysis of structures under a generalised cyclic load history. In: ASME Pressure Vessels and Piping Conference 2014, 2014-07-20 - 2014-07-24, California.
Wang, Maocai and Dai, Guangming and Vasile, Massimiliano (2014) Heuristic scheduling algorithm oriented dynamic tasks for imaging satellites. Mathematical Problems in Engineering, 2014. 234928. ISSN 1024-123X
McGregor, M. and Wheel, M. A. (2014) On the coupling number and characteristic length of micropolar media of differing topology. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 470. 20140150. ISSN 1471-2962
Pagnozzi, Daniele and Biggs, James (2014) Dynamical analysis of an orbiting three-rigid-body system. In: International Congress on Nonlinear Problems in Aviation and Aeronautics, ICNPAA 2014, 2014-07-15 - 2014-07-18.
Shevtsova, V. and Gaponenko, Y. and Kuhlmann, H. C. and Lappa, M. and Lukasser, M. and Matsumoto, S. and Mialdun, A. and Montanero, J. M. and Nishino, K. and Ueno, I. (2014) The JEREMI-project on thermocapillary convection in liquid bridges. Part B : Overview on impact of co-axial gas flow. Fluid Dynamics and Materials Processing, 10 (2). pp. 197-240. ISSN 1555-2578
Zamaro, Mattia and Biggs, James (2014) Dynamical systems techniques for designing libration point orbits in proximity of highly-inhomogeneous planetary satellites : Application to the Mars-Phobos elliptic three-body problem with additional gravity harmonics. In: International Congress on Nonlinear Problems in Aviation and Aeronautics, ICNPAA 2014, 2014-07-15 - 2014-07-18.
Wu, Lei and White, Craig and Scanlon, Thomas and Reese, Jason and Zhang, Yonghao (2014) Coherent Rayleigh-Brillouin scattering : influence of the intermolecular potential. In: 29th International Symposium on Rarefied Gas Dynamics, 2014-07-13 - 2014-07-18, Hilton Xi’an Hotel.
Zhang, Jun and Fan, Jing (2014) Two critical issues in Langevin simulation of gas flows. In: 29th International Symposium on Rarefied Gas Dynamics, 2014-07-13 - 2014-07-18, Hilton Xi’an Hotel.
Oggian, Tommaso and Drikakis, Dimitris and Youngs, David L. and Williams, Robin J. R. (2014) A hybrid compressible-incompressible computational fluid dynamics method for richtmyer-meshkov mixing. Journal of Fluids Engineering, 136 (9). 091210.
Probyn, Mike and Thornber, Ben and Drikakis, Dimitris and Youngs, David and Williams, Robin (2014) An investigation into nonlinear growth rate of two-dimensional and three-dimensional single-mode richtmyer-meshkov instability using an arbitrary-lagrangian-eulerian algorithm. Journal of Fluids Engineering, 136 (9). 091208. ISSN 0098-2202
Garcia, David and Trendafilova, Irina and Al-Bugharbee, Hussein Razzaq Sabah (2014) Vibration-based health monitoring approach for composite structures using multivatiate statistical analysis. In: 14th European Workshop on Structura Health Monitoring, 2014-07-08 - 2014-07-11.
Macdonald, Malcolm and Smith, Lesley Jane (2014) Impact assessment of Scottish independence on the space sector. University of Strathclyde, Glasgow.
Alicino, Simone and Vasile, Massimiliano; (2014) An evolutionary approach to the solution of multi-objective min-max problems in evidence-based robust optimization. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., GBR, pp. 1179-1186. ISBN 9781479914883
Masi, Luca and Vasile, Massimiliano (2014) A multidirectional Physarum solver for the automated design of space trajectories. In: 2014 IEEE Congress on Evolutionary Computation, CEC 2014, 2014-07-06 - 2014-07-11.
Minisci, Edmondo and Vasile, Massimiliano (2014) Adaptive inflationary differential evolution. In: CEC 2014, 2014-07-06 - 2014-07-11.
Pierce, Stephen and Dobie, Gordon and MacLeod, Charles Norman and Summan, Rahul and Baumanis, Kristaps and Macdonald, Malcolm and Punzo, Giuliano; (2014) Visual asset inspection using precision UAV techniques. In: 11th European Conference on Non-Destructive Testing. NDT.net, CZE. ISBN 9788021450189
Vasile, Massimiliano (2014) On the solution of min-max problems in robust optimization. In: The EVOLVE 2014 International Conference, A Bridge between Probability, Set Oriented Numerics, and Evolutionary Computing, 2014-07-01 - 2014-07-04, Jian-Guo Hotel.
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2014) Passive sorting of asteroid material using solar radiation pressure. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1223-1235. ISSN 1533-3884
Gilroy, D. and Young, A. M. and Phillips, A. and Wheel, M. and Riches, P. E. (2014) Characterisation and Validation of Sawbones™ Artificial Composite Femur material. In: 7th World Congress of Biomechanics, 2014-07-06 - 2014-07-11, John B. Hynes Veterans Memorial Convention Center.
Gong, Shengping and Simo, Jules (2014) Orbital motions of a solar sail around the L2 Earth-Moon libration point. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1349-1356. ISSN 1533-3884
Maclean, Craig David and Pagnozzi, Daniele and Biggs, James (2014) Planning natural repointing manoeuvres for nano-spacecraft. IEEE Transactions on Aerospace and Electronic Systems, 50 (3). pp. 2129-2145. ISSN 0018-9251
Maltin, Charles A. and Galloway, Alexander M. and Mweemba, Martin (2014) Microstructural evolution of Inconel 625 and Inconel 686CPT weld metal for clad carbon steel linepipe joints : a comparator study. Metallurgical and Materials Transactions A, 45A (8). pp. 3519-3532. ISSN 1073-5623
Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207
Alessi, E.M. and Rossi, A. and Valsecchi, G.B. and Anselmo, L. and Pardini, C. and Colombo, C. and Lewis, H.G. and Daquin, J. and Deleflie, F. and Vasile, M. and Zuiani, F. and Merz, K. (2014) Effectiveness of GNSS disposal strategies. Acta Astronautica, 99. pp. 292-302. ISSN 0094-5765
Borggräfe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin R. (2014) Optical control of solar sails using distributed reflectivity. In: AIAA SciTech 2014, 2014-01-13 - 2014-01-17, Washington.
Rasool, G. and Stack, M.M. (2014) Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribology International, 74. pp. 93-102. ISSN 0301-679X
Borg, Simon P. and Kelly, Nicolas J. and Buhagiar, Vincent; (2014) Energetic, environmental and economic modelling of a solar-assisted residential micro-trigeneration system in a Mediterranean climate. In: ASHRAE 2014 Annual Conference. American Society of Heating, Refrigerating and Air-conditioning Engineering (ASHRAE), USA. ISBN 9781936504770
Clarke, Joseph and Hand, Jon and Kim, Jae Min and Ladha, Cassim and Olivier, Patrick and Roskilly, Tony and Royapoor, Mohammad and Samuel, Aizaz and Wu, Dawei (2014) Pervasive sensing as a mechanicsm for the effective control of CHP plant in commerical buildings. In: Building Simulation and Optimisation (BSO14), 2014-06-23 - 2014-06-24, University College London.
Hand, Jon and Kelly, Nicolas and Samuel, Aizaz (2014) High resolution modelling for performance assessment of future dwellings. In: Building Simulation and Optimisation Conference, BSO '14, 2014-06-23 - 2014-06-24, University College London.
Monari, Filippo and Strachan, Paul (2014) Coupling stochastic methods and detailed dynamic simulation programs for model calibration : two preliminary case studies. In: 2nd Building Simulation and Optimisation Conference, BSO14, 2014-06-23 - 2014-06-24.
Burn, D.T. and Harper, Lee and Johnson, M. and Warrior, N.A. and Yang, Liu and Thomason, James (2014) The influence of coupling agent, fibre sizing and matrix degradation on the interfacial shear strength between carbon fibre and polypropylene. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Jenkins, Peter and Yang, Liu and Thomason, James (2014) Regeneration of thermally recycled glass fibre for cost-effective composite recycling : Fundamental study of strength loss of thermally conditioned glass fibre. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Kao, Chih-Chuan and Thomason, James (2014) Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Performance of fibre recyclates from thermoset composites and with subsequent ReCoVeR treatments. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Nagel, Ulf and Saez Rodriguez, Eduardo and Thomason, James and Kao, Chih-Chuan (2014) Regeneration of thermally recycled glass fibre for cost-effective composite recycling : Performance of composites based on PP and Recovered glass fibre. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Rudeiros Fernandez, Jose Luis and Thomason, James and Soliman, M. and Teraiya, A.K. (2014) Characterisation of the mechanial and interfacial adhesion performance of natural fibres in polyolefin compounds for lightweight automotive applications. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Saez Rodriguez, Eduardo and Yang, Liu and Thomason, James (2014) Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Increasing the strength of thermally conditioned glass fibres using cost effective ReCoVeR treatments. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Sáez-Rodriguez, E. and Yang, L. and Thomason, J. (2014) Regeneration of thermally recycled glass fibre for cost-effective composite recycling : increasing the strength of thermally conditioned glass fibres using cost effective recover treatments. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf (2014) Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Overview of the ReCoVeR projects. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Yang, Liu and Thomason, James (2014) Regeneration of thermally recycled glass fibre for cost-effective composite recycling : Increasing the strength of thermally conditioned glass fibres by HF treatment. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.
Kabalyk, Kirill and Liskiewicz, Grzegorz Pawel and Stickland, Matthew and Horodko, Longin and Kryllowicz, Wladyslaw (2014) Use of pressure spectral maps for analysis of influence of the plenum volume on the surge in centrifugal blower. In: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20.
Mogavero, Alessandro and Taylor, Ian and Brown, Richard (2014) Hybrid propulsion parametric and modular model : a novel engine analysis tool conceived for design optimization. In: 19TH AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2014-06-16 - 2014-06-20, Hyatt Regency Atlanta.
Wuilbercq, Romain and Pescetelli, Fabrizio and Minisci, Edmondo and Brown, Richard (2014) Influence of boundary layer transition on the trajectory optimisation of a reusable launch vehicle. In: 19TH AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2014-06-16 - 2014-06-20, Hyatt Regency Atlanta.
Wuilbercq, Romain and Pescetelli, Fabrizio and Mogavero, Alessandro and Minisci, Edmondo and Brown, Richard (2014) Robust multi-disciplinary design and optimisation of a reusable launch vehicle. In: 19TH AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2014-06-16 - 2014-06-20, Hyatt Regency Atlanta.
Meng, Jian-Ping and Dongari, Nishanth and Reese, Jason and Zhang, Yonghao (2014) Breakdown parameter for kinetic modeling of multiscale gas flows. Physical Review E, 89 (6). 063305. ISSN 2470-0053
Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Inverse problem for shape control of flexible reflectors using distributed solar pressure. Smart Materials and Structures, 23 (7). 075026. ISSN 0964-1726
Gill, Simon and Svehla, Katalin and Hand, Jon and Kim, Jae Min and Samuel, Aizaz and Clarke, Joseph and Kockar, Ivana and Ault, Graham (2014) Competing objectives in domestic demand side management: : learning from the Northern Isles New Energy Solutions projects. In: CIRED Workshop 2014, 2014-06-11 - 2014-06-12, Ergife Palace Hotel.
Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Burling, Paul and Stanhope, Chris (2014) Friction stir welding of steel for marine applications. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 2014-06-08 - 2014-06-13, California.
Wu, Lei and Reese, Jason and Zhang, Yonghao (2014) Oscillatory rarefied gas flow inside rectangular cavities. Journal of Fluid Mechanics, 748. pp. 350-367. ISSN 0022-1120
Lee, Deuk Hwan and Choi, Hyun-Woong and Kang, So-Ra and Yu, Ho Kyung and Kim, Jae-Min (2014) ISO 13790 한국형 유효계수 결정 방법론에 관한 연구. Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, 8 (3). pp. 127-135. ISSN 1976-6483
Thomason, J.L. and Yang, L. and Meier, R. (2014) The properties of glass fibres after conditioning at composite recycling temperatures. Composites Part A: Applied Science and Manufacturing, 61. pp. 201-208. ISSN 1359-835X
Clarke, Joseph Andrew and Hand, Jon and Kim, Jae Min and Ladha, Cassim and Ladha, Karim and Olivier, Patrick and Roskilly, Tony and Royapoor, Mohammad and Samuel, Aizaz and Wu, Dawei (2014) Pervasive sensing as a mechanism for the effective control of CHP plant in commercial buildings. In: Building Simulation and Optimisation (BSO14), 2014-06-23 - 2014-06-24, University College London.
Song, Xueguan and Cui, Lei and Cao, Maosen and Cao, Wenping and Park, Youngchul and Dempster, William M. (2014) A CFD analysis of the dynamics of a direct-operated safety relief valve mounted on a pressure vessel. Energy Conversion and Management, 81. pp. 407-419. ISSN 0196-8904
Porteous, C. and Sharpe, T. and Menon, R. and Shearer, D. and Musa, H. and Baker, P.H. and Sanders, C.H. and Strachan, Paul and Kelly, Nicolas and Markopoulos, Anastasios (2014) Domestic laundering : Environmental audit in Glasgow with emphasis on passive indoor drying and air quality. Indoor and Built Environment, 23 (3). pp. 373-392. ISSN 1420-326X
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter and Saez Rodriguez, Eduardo and Nagel, Ulf (2014) The ReCoVeR Projects : Regeneration of thermally recycled glass fibre for cost effective composite recycling. In: 2nd International Glass Fiber Symposium, 2014-05-25 - 2014-05-30.
Thomason, James and Yang, Liu (2014) Temperature dependence of the interfacial shear strength in glass-fibre epoxy composites. Composites Science and Technology, 96. pp. 7-12. ISSN 0266-3538
McInnes, Colin and Bewick, Russell and Sanchez Cuartielles, Joan-Pau; Harrison, Roy, ed. (2014) Space-based geoengineering solutions. In: Geoengineering of the Climate System. Royal Society of Chemistry, London, UK, pp. 186-211. ISBN 978-1-84973-953-5
Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Molter, Lars (2014) A techno-economic evaluation of friction stir welding of DH36 steel. In: 10th Friction Stir Welding Symposium, 10FSWS, 2014-05-20 - 2014-05-22, China National Convention Centre.
Wu, Lei and Reese, Jason M. and Zhang, Yonghao (2014) Solving the Boltzmann equation deterministically by the fast spectral method : application to gas microflows. Journal of Fluid Mechanics, 746. pp. 53-84. ISSN 0022-1120
Hand, Jon (2014) Opportunities and constraints in the use of simulation on low cost ARM-based computers. In: eSim 2014, Removing the Barriers to Application of Building Performance Simulation in Design Practice, 2014-05-07 - 2014-05-10.
Gorash, Yevgen and Mackenzie, Donald (2014) Safe structural design for fatigue and creep using cyclic yield strength. In: ECCC - Creep and Fracture Conference 2014, 2014-05-05 - 2014-05-07.
Abid, Muhammad and Awan, Abdul Waheed and Nash, David (2014) Determination of load capacity of a nongasketed flange joint under combined internal pressure, axial and bending loading for safe strength and sealing. Journal of the Brazilian Society of Mechanical Sciences, 36 (3). pp. 477-490. ISSN 0100-7386
Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M. (2014) Buckling analysis of stiffened variable angle tow panels. Composite Structures, 111. ISSN 0263-8223
Thomson, Avril and Sayer, Philip and McLaren, Andrew (2014) Supporting the STEM transition between school and university. In: HEA STEM Conference 2014, 2014-04-30 - 2014-05-01. (In Press)
Liśkiewicz, G. and Horodko, L. and Stickland, M. and Kryllowicz, W. (2014) Identification of phenomena preceding blower surge by means of pressure spectral maps. Experimental Thermal and Fluid Science, 54. pp. 267-278. ISSN 0894-1777
Macdonald, Malcolm (2014) Mission possible. Financial Chronicle. ISSN 0000-0000
Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Wayman, Alastair and Eckersley, Steven and Watson, Ian A. (2014) A space-based laser system for the deflection and manipulation of near Earth asteroids. In: International High Power Laser Ablation and Beamed Energy Propulsion Symposium, HPLA/BEP, 2014-04-21 - 2014-06-25.
Saafi, Mohamed and Tang, Leung and Fung, Jason and Rahman, Mahbubur and Sillars, Fiona and Liggat, John and Zhou, Xiangming (2014) Graphene/fly ash geopolymeric composites as self-sensing structural materials. Smart Materials and Structures, 23 (6). 065006. ISSN 0964-1726
Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Micallef, Daniel and Camilleri, Duncan and Poletz, Nicolas and Arbaoui, Larbi (2014) Advances in friction stir welding of steel : Project HILDA. In: Transport Research Arena (TRA2014), 2014-04-14 - 2014-04-17, CNIT, La Défense.
Campo-Deaño, Laura and Carneiro, J. and Oliveira, Monica and Pinho, F.T. (2014) Numerical and experimental in-vitro analysis of blood flow through middle cerebral aneurysms. In: 9th Annual European Rheology Conference, AERC 2014, 2014-04-08 - 2014-04-11.
Zografos, Konstantinos and Barber, Robert W. and Emerson, David and Oliveira, Monica (2014) Analysis of power-law fluid flow in constant depth microfluidic networks based on a generalised Murray's law. In: 9th Annual European Rheology Conference, AERC 2014, 2014-04-08 - 2014-04-11.
Zografos, Konstantinos and Barber, Robert W. and Emerson, David and Oliveira, Monica (2014) Flow of power law fluids in microfluidic bifurcating networks designed using biomimetic principles. In: 9th Annual European Rheology Conference, AERC 2014, 2014-04-08 - 2014-04-11.
Sinn, Thomas and Bogicevic, Tijana and Vasile, Massimiliano (2014) Self-folding smart structure inspired by nature's heliotropism. In: European Conference on Spacecraft Structures, Materials and Environmental Testing, SSMET 2014, 2014-04-01 - 2014-04-04, Steinberger Parkhotel.
Morton, Emma Mellanie and Tuohy, Paul Gerard (2014) Embracing variations in patterns of use, pre and post design phase, to improve tenant energy performance. In: 4th Annual CIBSE ASHRAE Technical Symposium, 2014-04-03 - 2014-04-04.
Campo-Deaño, Laura and Carneiro, J. and Oliveira, Monica and Pinho, F.T. (2014) Influence of the non-linear rheological properties of blood in middle cerebral aneurysms : Numerical and experimental in vitro analysis. In: XIX Congreso de Física Estadística, FisEs'14, 2014-04-02 - 2014-04-04.
Kuo, Chih-Wei and Lee, Kuen-Chan and Yen, Feng-Lin and Shen, Yun-Hwei and Lee, Huey-Er and Wen, Shaw-Bing and Wang, Moo-Chin and Stack, Margaret Mary (2014) Growth kinetics of tetragonal and monoclinic ZrO2 crystallites in 3 mol% yttria partially stabilized ZrO2 (3Y-PSZ) precursor powder. Journal of Alloys and Compounds, 592. pp. 288-295. ISSN 0925-8388
Colombo, Camilla and Letizia, Francesca and Soldini, Stefania and Lewis, Hugh and Alessi, Elisa Maria and Rossi, Alessandro and Vasile, Massimiliano and Vetrisano, Massimo and Van Der Weg, Willem Johan and Landgraf, Markus (2014) End-of-life disposal concepts for libration point and highly elliptical orbit missions. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Han, Yu and Biggs, James and Cui, Naigang (2014) An application of adaptive fault-tolerant control to nano-spacecraft. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Heiligers, Jeannette and Mingotti, Giorgio and McInnes, Colin (2014) Optimisation of solar sail interplanetary heteroclinic connections. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Mingotti, Giorgio and Heiligers, Jeannette and McInnes, Colin (2014) First-guess generation of solar sail interplanetary heteroclinic connections. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Mushet, Garrie and McInnes, Colin (2014) Self-organising low Earth orbit constellations for Earth observation. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Qiao, Dong and McInnes, Colin (2014) Trajectory options for low-cost missions to easily retrievable objects. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.
Kuhlmann, H. C. and Lappa, M. and Melnikov, D. and Mukin, R. and Muldoon, F. H. and Pushkin, D. and Shevtsova, V. and Ueno, I. (2014) The JEREMI-project on thermocapillary convection in liquid bridges. Part A : Overview of particle accumulation structures. Fluid Dynamics and Materials Processing, 10 (1). pp. 1-36. ISSN 1555-2578
Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew and Gribben, Brian and Adams, Neil and Gellatly, Breanne (2014) Sensitivity of space and time on scanning LiDAR data correlation and the implications on synchronisation of bi-static systems. In: EWEA 2014 Annual Wind Energy Event, 2014-03-10 - 2014-03-13.
Punzo, Giuliano and Simo, Jules and Bennet, Derek James and Macdonald, Malcolm (2014) Characteristics of swarms on the edge of fragmentation. Physical Review E, 89. 032903. ISSN 2470-0053
Ridley-Ellis, Dan and Popescu, Carmen-Mehaela and Keating, Barbara and Popescu, Maria-Cristina and Hill, Callum A.S. (2014) Stiffness changes during low temperature thermal treatment of Scots pine, assessed by acoustic NDT. In: 7th European Conference on Wood Modification, ECWM7, 2014-03-10 - 2014-03-12.
Caubet, Albert and Biggs, James D.; (2014) Design of an attitude stabilization electromagnetic module for detumbling uncooperative targets. In: 2014 IEEE Aerospace Conference. IEEE Computer Society Press, GBR. ISBN 9781479916221
Appourchaux, T and Auchère, F and Antonucci, E and Gizon, L and Macdonald, Malcolm and Hara, H and Sekii, T and Moses, D and Vourlidas, A; Macdonald, Malcolm, ed. (2014) SOLARIS : Solar sail investigation of the Sun. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 259-268. ISBN 978-3-642-34906-5
Dachwald, B. and Macdonald, Malcolm; Macdonald, Malcolm, ed. (2014) Gossamer roadmap technology reference study for a multiple NEO rendezvous mission. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 211-216. ISBN 978-3-642-34906-5
Kuo, Chih-Wei and Shen, Yun-Hwei and Yen, Feng-Lin and Cheng, Huy-Zu and Hung, I-Ming and Wen, Shaw-Bing and Wang, Moo-Chin and Stack, Margaret (2014) Phase transformation behavior of 3 mol% yttria partially-stabilized ZrO2 (3Y–PSZ) precursor powder by an isothermal method. Ceramics International, 40 (2). pp. 3243-3251. ISSN 0272-8842
Macdonald, Malcolm and McGrath, Ciara and Appourchaux, T and Dachwald, B. and Finsterle, W and Gizon, L and Liewer, P.C. and McInnes, Colin and Mengali, Giovanni and Seboldt, W. and Sekii, T and Solanki, S.K. and Velli, M and Wimmer-Schweingruber, R.F. and Spietz, Peter and Reinhard, Ruedeger; Macdonald, Malcolm, ed. (2014) Gossamer roadmap technology reference study for a solar polar mission. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 243-258. ISBN 9783642349065
Mazal, Leonel and Mingotti, Giorgio and Gurfil, Pini (2014) Optimal on-off cooperative manoeuvers for long-term satellite cluster flight. Journal of Guidance, Control and Dynamics, 37 (2). pp. 391-402. ISSN 1533-3884
McInnes, Colin and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter; Macdonald, Malcolm, ed. (2014) Gossamer roadmap technology reference study for a sub-L1 Space weather mission. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 227-242. ISBN 978-3-642-34906-5
Simo, Jules and McInnes, Colin (2014) Feedback stabilization of displaced periodic orbits : applications to binary asteroids. Acta Astronautica, 96. pp. 106-115. ISSN 0094-5765
MacLeod, C. N. and Cao, J. and Pierce, S. G. and Sullivan, J. C. and Pipe, A. G. and Dobie, G. and Summan, R.; (2014) Remotely deployable aerial inspection using tactile sensors. In: 40TH Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP Publishing, USA. ISBN 978-0-7354-1211-8
Gislason, Magnus and Coupaud, Sylvie and Sasagawa, Keisuke and Tanabe, Yuji and Purcell, Mariel and Allan, David B and Tanner, K. Elizabeth (2014) Prediction of risk of fracture in the tibia due to altered bone mineral density distribution resulting from disuse : a finite element study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (2). p. 165. ISSN 0954-4119
Calautit, John Kaiser and Chaudhry, Hassam Nasarullah and Hughes, Ben Richard and Sim, Lik Fang (2014) A validated design methodology for a closed-loop subsonic wind tunnel. Journal of Wind Engineering and Industrial Aerodynamics, 125. pp. 180-194. ISSN 0167-6105
Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2014) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. Journal of Pressure Vessel Technology, 136 (1). 011205. ISSN 0094-9930
Meng, Jian-Ping and Zhang, Yonghao (2014) Diffuse reflection boundary condition for high-order lattice Boltzmann models with streaming-collision mechanism. Journal of Computational Physics, 258. pp. 601-612. ISSN 0021-9991
Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan (2014) Novel orbits of Mercury, Venus and Mars enabled using low-thrust propulsion. Acta Astronautica, 94 (2). pp. 634-645. ISSN 0094-5765
Macdonald, Malcolm and Lowe, Christopher John (2014) It's hip to be square : The CubeSat revolution. Aerospace. pp. 22-25. ISSN 2052-451X
Gray, Thomas and Camilleri, Duncan and McPherson, Norman (2014) Control of welding distortion in thin plate fabrication : Design support exploiting computational simulation. Welding and Other Joining Technologies . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857090478
Lappa, Marcello (2014) Stationary solid particle attractors in standing waves. Physics of Fluids, 26 (1). 013305. ISSN 1070-6631
Babac, Gulru and Reese, Jason M. (2014) Molecular dynamics simulation of classical thermosize effects. Nanoscale and Microscale Thermophysical Engineering, 18 (1). pp. 39-53. ISSN 1556-7265
Heiligers, Jeannette and McInnes, Colin (2014) Novel solar sail mission concepts for Space weather forecasting. In: 24th AAS/AIAA Space Flight Mechanics Meeting 2014, 2014-01-26 - 2014-01-30, New Mexico.
Mingotti, Giorgio and McInnes, Colin (2014) Relative dynamics and control of high area-to-mass ratio spacecraft flying around an oblate Earth exploiting solar radiation pressure. In: 24th AAS/AIAA Space Flight Mechanics Meeting 2014, 2014-01-26 - 2014-01-30, New Mexico.
Ritos, Konstantinos and Mattia, Davide and Calabrò, Francesco and Reese, Jason M. (2014) Flow enhancement in nanotubes of different materials and lengths. Journal of Chemical Physics, 140 (1). 014702. ISSN 0021-9606
Pagnozzi, Daniele and Biggs, James (2014) Lyapunov characteristic exponent maps for multi-body space systems analysis. In: AIAA SciTech 2014, 2014-01-13 - 2014-01-17, Washington.
Sousa, P.C. and Carneiro, J. and Vaz, R. and Cerejo, A. and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2014) Shear viscosity and nonlinear behaviour of whole blood under large amplitude oscillatory shear. Biorheology, 50 (5-6). pp. 269-282. ISSN 0006-355X
Lima, Rui and Imai, Y and Ishikawa, T. and Oliveira, Monica, eds. (2014) Visualisation and simulation of complex flows in biomedical engineering. Lecture Notes in Computational Vision and Biomechanics, 12 . Springer, Germany. ISBN 978-94-007-7769-9
Alicino, Simone and Vasile, Massimiliano; (2014) An evolutionary approach to the solution of multi-objective min-max problems in evidence-based robust optimization. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., pp. 1179-1186. ISBN 9781479914883
Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2014) Analytical method for perturbed frozen orbit around an Asteroid in highly inhomogeneous gravitational fields : A first approach. Astronomicheskii Vestnik / Solar System Research, 48 (1). pp. 33-47. ISSN 0038-0946
Liu, Haihu and Valocchi, Albert J. and Zhang, Yonghao and Kang, Qinjun (2014) Lattice Boltzmann phase-field modeling of thermocapillary flows in a confined microchannel. Journal of Computational Physics, 256. pp. 334-356. ISSN 0021-9991
Masi, Luca and Vasile, Massimiliano; (2014) A multidirectional Physarum solver for the automated design of space trajectories. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., pp. 2992-2999. ISBN 9781479914883
Bradford, R.A.W. and Ure, James and Chen, Haofeng (2014) The Bree problem with different yield stresses on-load and off-load and application to creep ratcheting. International Journal of Pressure Vessels and Piping, 113. ISSN 0308-0161
Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2014) Trajectory and spacecraft design for a pole-sitter mission. Journal of Spacecraft and Rockets, 51 (1). pp. 311-326. ISSN 0022-4650
David-West, Opukuro and Nash, David and Banks, William (2014) Low velocity heavy mass impact response of singly curved composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (1). pp. 17-33. ISSN 1464-4207
Docherty, Stephanie and Nicholls, William D. and Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2014) Boundary conditions for molecular dynamics simulations of water transport through nanotubes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (1). pp. 186-195. ISSN 0954-4062
Ellul, B and Camilleri, Duncan and Betts, J (2014) A progressive failure analysis applied to fibre-reinforced composite plates subject to out-of-plane bending. Mechanics of Composite Materials, 49 (6). pp. 605-620. ISSN 0191-5665
Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2014) Optimised cross-slot microdevices for homogeneous extension. RSC Advances, 4 (15). pp. 7799-7804. ISSN 2046-2069
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2014) Mission analysis and systems design of a near-term and far-term pole-sitter mission. Acta Astronautica, 94 (1). pp. 455-469. ISSN 0094-5765
Pethrick, Richard and Banks, William and Brodesser, Monika (2014) Ageing of thermoplastic umbilical hose materials used in a marine environment I : Polyethylene. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228. pp. 45-62. ISSN 1464-4207
Pethrick, Richard and Banks, William and Brodesser, Monika (2014) Ageing of thermoplastic umbilical hose materials used in a marine environment II : Nylon. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228. pp. 63-88. ISSN 1464-4207
Punzo, Giuliano and Karagiannakis, Philippos and Bennet, Derek James and Macdonald, Malcolm and Weiss, Stephan (2014) Enabling and exploiting self-similar central symmetry formations. IEEE Transactions on Aerospace and Electronic Systems, 50 (1). pp. 689-703. ISSN 0018-9251
Thomason, James and Kao, Chih-Chuan and Ure, James Michael and Yang, Liu (2014) The strength of glass fibre reinforcement after exposure to elevated composite processing temperatures. Journal of Materials Science, 49 (1). pp. 153-162. ISSN 0022-2461
Van Der Weg, Willem Johan and Vasile, Massimiliano (2014) Contingency and recovery options for the European Student Moon Orbiter. Acta Astronautica, 94 (1). pp. 168-183. ISSN 0094-5765
Macdonald, Malcolm and Badescu, Viorel, eds. (2014) The International Handbook of Space Technology. Springer Praxis Books, Chichester, UK. ISBN 978-3-642-41100-7
Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin; Macdonald, Malcolm, ed. (2014) Distributed reflectivity solar sails for extended mission applications. In: Advances in Solar Sailing. Springer Praxis Books - Astronautical Engineering . Springer Praxis Books, GBR, pp. 331-350. ISBN 9783642349065
Casanova, D. and Tardioli, C. and Lemaître, A. (2014) Space debris collision avoidance using a three-filter sequence. Monthly Notices of the Royal Astronomical Society, 442 (4). pp. 3235-3242. stu1065. ISSN 0035-8711
Duering, Marcel and Landgraf, Markus and Vasile, Massimiliano (2014) Station-keeping for quasi-periodic orbits. In: 65th International Astronautical Congress, 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.
Keegan, Mark Hugh and Nash, David and Stack, Margaret (2014) Wind Turbine Blade Leading Edge Erosion : An Investigation of Rain Droplet and Hailstone Impact Induced Damage Mechanisms. PhD thesis, University Of Strathclyde.
Maltin, C. A. and Galloway, A. M. and Mweemba, M (2014) Alternative nickel based filler metals for use in the girth welding of bi-metallic pipelines. Metallurgical and Materials Transactions A. ISSN 1073-5623 (Submitted)
Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2014) Delamination assessment in structures made of composites based on general signal correlation. International Journal of Structural Stability and Dynamics, 14 (8). 1440022. ISSN 0219-4554
Vasile, Massimiliano and Becerra, Victor M. (2014) Computational intelligence in aerospace sciences. Progress in Astronautics and Aeronautics Series . American Institute of Aeronautics and Astronautics, Reston, V.A.. ISBN 978-1-62410-260-8
Zografos, Konstantinos and Oliveira, Monica and Emerson, David and Barber, R.W.; (2014) Constant depth microfluidic networks based on a generalised Murry's law for Newtonian and power-law fluids. In: 4th Micro and Nano Flows Conference (book of abstracts). Brunel University London, GBR. ISBN 978-1-908549-16-7 (Unpublished)
2013
Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Internal mass transfer enhancement in flow-through catalytic membranes. Chemical Engineering Science, 104. pp. 1090-1106. ISSN 0009-2509
Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2013) Fluid simulations with atomistic resolution : a hybrid multiscale method with field-wise coupling. Journal of Computational Physics, 255. pp. 149-165. ISSN 0021-9991
Patronis, Alexander and Lockerby, Duncan A. and Borg, Matthew K. and Reese, Jason M. (2013) Hybrid continuum–molecular modelling of multiscale internal gas flows. Journal of Computational Physics, 255. pp. 558-571. ISSN 0021-9991
Li, Jonathan and Zhang, Yonghao and Reese, Jason (2013) Multiphase lattice Boltzmann simulations of droplets in microchannel networks. Houille Blanche, 5. pp. 5-11. ISSN 0018-6368
Borg, S.P. and Kelly, N.J. (2013) High resolution performance analysis of micro-trigeneration in an energy-efficient residential building. Energy and Buildings, 67. pp. 153-165. ISSN 0378-7788
Calautit, John Kaiser and Hughes, Ben Richard and Chaudhry, Hassam Nasarullah and Ghani, Saud Abdul (2013) CFD analysis of a heat transfer device integrated wind tower system for hot and dry climate. Applied Energy, 112. pp. 576-591. ISSN 0306-2619
Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307
Palazzetti, Roberto and Zucchelli, Andrea and Trendafilova, Irina (2013) The self-reinforcing effect of nylon 6,6 nano-fibres on CFRP laminates subjected to low velocity impact. Composite Structures, 106. pp. 661-671. ISSN 0263-8223
Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) A higher order control volume based finite element method to prodict the deformation of heterogeneous materials. Computers and Structures, 129. pp. 54-62. ISSN 0045-7949
Famuyibo, A.A. and Duffy, Aidan and Strachan, Paul (2013) Achieving a holistic view of the life cycle performance of existing dwellings. Building and Environment, 70. pp. 90-101. ISSN 0360-1323
Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue endurance of welded joints. Proceedings in Applied Mathematics and Mechanics, PAMM, 13 (1). pp. 73-74. ISSN 1617-7061
Hussainova, I. and Stack, Margaret (2013) 3rd International Conference on Tribocorrosion – Atlanta 2012. Tribology International, 68. iv. ISSN 0301-679X
Kim, Jae Min and Lee, Deuk Hwan and Yu, Ho Kyung and Han, Se hee and Choi, Hyun Woong (2013) 건물 구조체에 따른 히트펌프 시스템 계절별 에너지 효율 계수. Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, 7 (4). pp. 223-231. ISSN 1976-6483
Maclean, Craig David and Biggs, James (2013) Path planning for simple wheeled robots : sub-Riemannian and elastic curves on SE(2). Robotica, 31 (08). pp. 1285-1297. ISSN 0263-5747
Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2013) Postbuckling analysis of variable angle tow plates using differential quadrature method. Composite Structures, 106. pp. 74-84. ISSN 0263-8223
Wilson, I.A.Grant and Rennie, Anthony J.R. and Hall, Peter J. and Kelly, Nicolas (2013) A daily representation of Great Britain's energy vectors : Natural gas, electricity and transport fuels. In: INCEREE 2013, Primer Congreso Internacional y Expo Cientifica, Investigación Sostenible: Energías Renovables y Eficiencìa Energética, 2013-11-28 - 2013-11-29.
Micallef, Daniel and Camilleri, Duncan and Mollicone, Pierluigi (2013) Simplified thermo-elastoplastic numerical modelling techniques applied to friction stir welding of mild steel. In: ASME 2013 International Mechanical Engineering Congress and Expositi, 2013-11-15 - 2013-11-21, California.
Biggs, James and Maclean, Craig David and Caubet, Albert (2013) Heteroclinic optimal control solutions for attitude motion planning. In: Australian Control Conference, ACC 2013, 2013-11-04 - 2013-11-05.
Anderson, Pamela and Macdonald, Malcolm (2013) Sun-synchronous highly elliptical orbits using low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1849-1855. ISSN 1533-3884
Beyer, V. and Campbell, Stuart and Ramsey, Gemma and Galloway, Alexander and Moore, A.J. and McPherson, Norman (2013) Systematic study of effect of cross-drafts and nozzle diameter on shield gas coverage. Science and Technology of Welding and Joining, 18 (8). pp. 652-660. ISSN 1362-1718
McInnes, Colin and Colombo, Camilla (2013) Wave-like patterns in an elliptical satellite ring. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1767-1771. ISSN 1533-3884
Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin; Badescu, Viorel, ed. (2013) Usage of asteroid resources for space-based geoengineering. In: Asteroids. Springer Berlin Heidelberg, pp. 581-604. ISBN 978-3-642-39243-6
Sanchez Cuartielles, Joan-Pau and McInnes, Colin; Badescu, Viorel, ed. (2013) Available asteroid resources in the Earth's neighbourhood. In: Asteroids. Springer Berlin Heidelberg, pp. 439-458. ISBN 978-3-642-39243-6
Meng, Jian-Ping and Wu, Lei and Reese, Jason and Zhang, Yonghao (2013) Assessment of the ellipsoidal-statistical Bhatnagar-Gross-Krook model for force-driven Poiseuille flows. Journal of Computational Physics, 251. pp. 385-395. ISSN 0021-9991
Mathew, Mathew T and Stack, Margaret (2013) Special cluster issue on tribocorrosion of dental materials. Journal of Physics D: Applied Physics, 46 (40). 400301. ISSN 1361-6463
Sharifi, Shayan and Stack, Margaret (2013) A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions. Journal of Physics D: Applied Physics, 46 (40). 404008. ISSN 1361-6463
Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio (2013) Robust aerodynamic design optimisation of horizontal axis wind turbine rotors. In: EUROGEN 2013 - Evolutionary and deterministic methods for design, optimization and Control with applications to Industrial and Societal Problems, 2013-10-07 - 2013-10-09, Gran Canaria.
Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2013) A hybrid molecular-continuum simulation method for incompressible flows in micro/nanofluidic networks. Microfluidics and Nanofluidics, 15 (4). pp. 541-557. ISSN 1613-4982
Dempster, William and Elmayyah, Wael (2013) Two phase discharge flow prediction in safety valves. International Journal of Pressure Vessels and Piping, 110. pp. 61-65. ISSN 0308-0161
Gorash, Yevgen and Chen, Haofeng (2013) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). Materials Research Innovations, 17 (5). pp. 337-343.
Sinn, Thomas and de Franca Queiroz, Tiago and Brownlie, Frazer and Leite, Larissa and Allan, Andrew and Rowan, Adam and Gillespie, Jonathan (2013) iSEDE demonstrator on high altitude balloon BEXUS : inflatable satellite encompassing disaggregated electronics. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Wilson, I.A. Grant and Rennie, Anthony J.R. and Ding, Y. and Eames, P.C. and Hall, Peter J. and Kelly, Nicolas (2013) Historical daily gas and electrical energy flows through Great Britain's transmission networks and the decarbonisation of domestic heat. Energy Policy, 61. pp. 301-305. ISSN 1873-6777
Wu, Lei and White, Craig and Scanlon, Thomas and Reese, Jason and Zhang, Yonghao (2013) Deterministic numerical solutions of the Boltzmann equation using the fast spectral method. Journal of Computational Physics, 250. pp. 27-52. ISSN 0021-9991
Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 1 : arc pressure measurement. Science and Technology of Welding and Joining, 18 (7). pp. 591-596. ISSN 1362-1718
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 2 : arc force determination. Science and Technology of Welding and Joining, 18 (7). pp. 597-602. ISSN 1362-1718
Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 110. p. 1. ISSN 0308-0161
Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue strength of welded joints using the linear matching method. International Journal of Fatigue, 55. pp. 112-125. ISSN 0142-1123
Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Operation of a perfusive catalytic membrane with nonlinear kinetics. Chemical Engineering Journal, 232. pp. 192-212. ISSN 1385-8947
Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2013) Buckling analysis of variable angle tow composite plates using differential quadrature. Journal of the Indian Institute of Science, 93 (4). pp. 689-697. ISSN 0019-4964
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Kindler, Detlef (2013) Measurement and simulation of the flow field around a triangular lattice meteorological mast. Energy and Power Engineering, 5 (10). ISSN 1949-243X
van der Weg, Willem Johan and Vasile, Massimiliano; (2013) Earth-Sun L1 and L2 to Moon transfers exploiting natural dynamics. In: 64th International Astronautical Congress 2013, IAC 2013. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), CHN, pp. 5453-5461. ISBN 9781629939094
Thomason, James and Saez Rodriguez, Eduardo and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter (2013) Regeneration of the performance of glass fibre recycled from End-of-life composites or glass fibre waste : Presentation & Abstract. In: Design for the End of Life of Fibre Reinforced Composite Materials Conference, 2013-09-25 - 2013-09-25.
Yaginuma, T. and Oliveira, Monica and Lima, Rui and Ishikawa, T. and Yamaguchi, T. (2013) Human red blood cell behaviour under homogeneous extensional flow in a hyperbolic-shaped microchannel. Biomicrofluidics, 7 (5). 054110. ISSN 1932-1058
Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2013) Shape-changing solar sails for novel mission applications. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Clark, Ruaridh and Macdonald, Malcolm (2013) Residual air inflated systems for CubeSats. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Colombo, Camilla and Lewis, Hugh and Letizia, Francesca and Vasile, Massimiliano and Vetrisano, Massimo and Van Der Weg, Willem Johan and McInnes, Colin and Macdonald, Malcolm and Alessi, Elisa Maria and Rossi, Alessandro and Dimare, Linda and Landgraf, Markus (2013) End-of-life disposal trajectories for libration point and highly elliptical orbit missions. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Donaldson, Nathan and Parry, Thomas and Sinn, Thomas and Garcia Yarnoz, Daniel and Lowe, Christopher John and Clark, Ruaridh (2013) Ejection and recovery system for CubeSat sized ejectables on sounding rockets. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Applications of solar radiation pressure dominated highly non-Keplerian trajectories around minor bodies. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin; (2013) Opportunities for asteroid retrieval missions. In: Asteroids. Springer Berlin Heidelberg, London, 479-505, Chapter 21. ISBN 978-3-642-39243-6
Heiligers, Jeannette and McInnes, Colin R. (2013) Agile solar sailing in three-body problem : Motion between artificial equilibrium points. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Kubicek, Martin and Minisci, Edmondo (2013) Global error estimation in CFD mesh coarsening process for uncertainty quantification methods. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Lowe, Christopher John and Macdonald, Malcolm and Greenland, Stephen (2013) Parametric CubeSat flight simulation architecture. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Lowe, Christopher John and Macdonald, Malcolm and Greenland, Stephen (2013) Through-life modelling of nano-satellite power system dynamics. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Owens, Steven Robert and Macdonald, Malcolm (2013) Novel numerical optimisation of the Hohmann Spiral Transfer. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Sanchez Cuartielles, Joan-Pau and Alessi, Elisa Maria and Garcia Yarnoz, Daniel and McInnes, Colin (2013) Earth resonant gravity assists for asteroid retrieval missions. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Sinn, Thomas and Brown, Roy Hutton and McRobb, Malcolm and Wujek, Adam and Lowe, Christopher John and Weppler, Johannes and Parry, Thomas and Garcia Yarnoz, Daniel and Brownlie, Frazer and Skogby, Jerker and Dolan, Iain and de Franca Queiroz, Tiago and Rogberg, Fredrik and Donaldson, Nathan and Clark, Ruaridh and Allan, Andrew and Tibbert, Gunnar (2013) Lessons learned from three university experiments onboard the REXUS/BEXUS sounding rockets and stratosphere balloons. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Sinn, Thomas and Hilbich, Daniel and Vasile, Massimiliano (2013) Inflatable shape changing colonies assembling versatile smart space structures. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Vetrisano, Massimo and Garcia Yarnoz, Daniel and Branco, Joao (2013) Effective approach navigation prior to small body deflection. In: 12th Annual Space Generation Congress 2013, 2013-09-23 - 2013-09-27.
Vetrisano, Massimo and Vasile, Massimiliano (2013) Autonomous GNC for asteroid deflection and attitude control via laser ablation. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2013) A computational fluid dynamic analysis of the effect of weld nozzle geometry changes on shielding gas coverage during gas metal arc welding. Journal of Manufacturing Science and Engineering, 135 (5). 051016. ISSN 1528-8935
Thomason, James (2013) Facing up to the challenges of natural fibres as an engineering composite reinforcement : Abstract and Presentation. In: Composites Week @ Leuven, 2013-09-16 - 2013-09-20.
Garcia, David and Trendafilova, Irina (2013) Multivariate statistical analysis for damage and delamination in composite structures. In: 11th International Conference on Vibration Problems, 2013-09-09 - 2013-09-12, Instituto Superior Tecnico.
Karagiannakis, Philippos and Weiss, Stephan and Punzo, Giuliano and Macdonald, Malcolm and Bowman, J. and Stewart, Robert (2013) Impact of Purina fractal array geometry on beamforming performance and complexity. In: 21st European Signal Processing Conference, 2013-09-09 - 2013-09-13.
Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) On erosion issues associated with the leading edge of wind turbine blades. Journal of Physics D: Applied Physics, 46 (38). 383001. ISSN 1361-6463
Uzzaman, Asraf and Wrzesien, A.M. and Hamilton, Robert and Lim, JBP and Nash, David (2013) Investigation of cold-formed steel top-hat sections under bending. In: 14th International Conference on Civil, Structural and Environmental Engineering Computing, ICC2013, 2013-09-03 - 2013-09-06.
Alexiadis, Alessio and Lockerby, Duncan A. and Borg, Matthew Karl and Reese, Jason (2013) A Laplacian-based algorithm for non-isothermal atomistic-continuum hybrid simulation of micro and nano-flows. Computer Methods in Applied Mechanics and Engineering, 264. pp. 81-94. ISSN 0045-7825
Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A (2013) Experimental analysis of laser ablated plumes for asteroid deflection and exploitation. Acta Astronautica, 90 (1). pp. 85-97. ISSN 0094-5765
Parvez, Shahid and Abid, Muhammad and Nash, David and Fawad, H. and Galloway, Alexander (2013) Effect of torch angle on arc properties and weld pool shape in stationary GTAW. Journal of Engineering Mechanics, 139 (9). pp. 1268-1277. ISSN 0733-9399
Barclay, C. J. and Campbell, S. W. and Galloway, A. M. and McPherson, N. A. (2013) Artificial neural network prediction of weld distortion rectification using a travelling induction coil. International Journal of Advanced Manufacturing Technology, 68 (1-4). pp. 127-140. ISSN 1433-3015
Hasager, C.B. and Stickland, Matthew and Stein, F.P. Detlef and Courtney, Michael and Pena, Alfredo and Mikkelsen, Torben and Oldroyd, Andrew (2013) Hub height ocean winds over the North Sea observed by the NORSEWinD LiDAR array : measuring techniques, quality control and data management. Remote Sensing, 5 (9). pp. 4280-4303. ISSN 2072-4292
Karagiannakis, Philippos and Weiss, Stephan and Punzo, Giuliano and Macdonald, Malcolm and Bowman, Jamie and Stewart, Robert (2013) Impact of a purina fractal array geometry on beamforming performance and complexity. In: 21st European Signal Processing Conference, 2013-09-09 - 2013-09-13.
Liu, Haihu and Valocchi, Albert J. and Kang, Qinjun and Werth, Charles (2013) Pore-scale simulations of gas displacing liquid in a homogeneous pore network using the lattice Boltzmann method. Transport in Porous Media, 99 (3). pp. 555-580. ISSN 0169-3913
Stolbunov, Valentin and Ceriotti, Matteo and Colombo, Camilla and McInnes, Colin (2013) Optimal law for inclination change in an atmosphere through solar sailing. Journal of Guidance, Control and Dynamics, 36 (5). pp. 1310-1323. ISSN 1533-3884
Wu, Zhangming and Weaver, Paul M. and Raju, Gangadharan (2013) Postbuckling optimisation of variable angle tow composite plates. Composite Structures, 103. pp. 34-42. ISSN 0263-8223
Zuiani, Federico and Vasile, Massimiliano (2013) Multi agent collaborative search based on Tchebycheff decomposition. Computational Optimization and Applications, 56 (1). pp. 189-208. ISSN 0926-6003
Zhou, Xingguo and Pan, Wenke and MacKenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109. 2–6. ISSN 0308-0161
Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. Journal of Pressure Vessel Technology, 135 (5). 051202. ISSN 0094-9930
Murphy, Gavin Bruce and Allison, John and Monari, Filippo (2013) Determining the effect of weather data upon building simulation in regulatory processes. In: 13th International Building Performance Simulation Association Conference, BS2013, 2013-08-25 - 2013-08-28, Aix-les-Bains.
Clarke, Joseph Andrew and Hand, Jon and Hong, Jun and Kelly, Nicolas and Picco, Marco and Samuel, Aizaz and Svehla, Katalin (2013) Low energy communities : The automatic sizing of hybrid renewable energy schemes and the generation of a simulation input model for performance appraisal. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Clarke, Joseph Andrew and Hand, Jon and Kim, Jae Min and Samuel, Aizaz and Svehla, Katalin (2013) Electricity storage within the domestic sector as a means to enable renewable energy integration within exisiting electricity networks. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Kelly, Nicolas and Tuohy, Paul Gerard (2013) Simulation based performance assessment of phase change enhanced thermal buffering for domestic heat pump load shifting. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Markopoulos, Anastasios and Strachan, Paul and Kelly, Nicolas and Baker, P.H. (2013) Towards whole building moisture modelling of the impacts of short duration moisture release. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Monari, Filippo and Strachan, Paul and Ortiz, Jose (2013) Employing local and global sensitivity analysis techniques to guide user interface development of energy certification and compliance software tools. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Murphy, Gavin Bruce and Tuohy, Paul Gerard (2013) Monitoring and modelling the first passivehouse in Scotland. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.
Caubet, Albert and Biggs, James (2013) Optimal attitude motion planner for large slew manoeuvers using a shape-based method. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.
Furfaro, Roberto and Gaudet, Brian and Wibben, Daniel and Simo, Jules (2013) Development of non-linear guidance algorithms for asteroids close-proximity operations. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.
Macdonald, Malcolm (2013) Analytical, circle-to-circle low-thrust transfer trajectories with plane change. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.
Macdonald, Malcolm and McInnes, Colin and Bewick, Charlotte (2013) Needs assessment of gossamer structures in communications platform end-of-life disposal. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.
Vetrisano, Massimo and Branco, Joao and Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and Vasile, Massimiliano (2013) Deflecting small asteroids using laser ablation : Deep space navigation and asteroid orbit control for LightTouch2 Mission. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.
Alicino, Simone and Vasile, Massimiliano; (2013) Surrogate-based maximization of belief function for robust design optimization. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference . American Institute of Aeronautics and Astronautics, USA. ISBN 9781624102233
Keating, Barbara A. and Hill, Callum A. S. and Sun, Dongyang and English, Rob and Davies, Phil and McCue, Charles (2013) The water vapor sorption behavior of a galactomannan cellulose nanocomposite film analyzed using parallel exponential kinetics and the Kelvin–Voigt viscoelastic model. Journal of Applied Polymer Science, 129 (4). pp. 2352-2359. ISSN 0021-8995
Schnier, Gladys and Wood, James and Galloway, Alexander; (2013) An experimental validation of residual stresses in weld clad pipelines. In: Research and Applications in Structural Engineering, Mechanics & Computation. Taylor and Francis, CRC Press, ZAF, pp. 613-617. ISBN 978-1-138-00061-2
Clarke, Joseph Andrew (2013) Moisture flow modelling within the ESP-r integrated building performance simulation system. Journal of Building Performance Simulation, 6 (5). pp. 385-399. ISSN 1940-1493
Furaro, Roberto and Simo, Jules and Gaudet, Brian and Wibben, Daniel; Broschart, Stephen and Turner, James and Howell, Kathleen and Hoots, Felix, eds. (2013) Neural-based trajectory shaping approach for terminal planetary pinpoint guidance. In: Advances in the Astronautical Sciences. Advances in the Astronautical Sciences, 150 . Univelt Inc, USA, pp. 2557-2574.
Furfaro, Roberto and Simo, Jules and Gaudet, Brian and Wibben, Daniel (2013) Neural-based trajectory shaping approach for terminal planetary pinpoint guidance. In: AAS/AIAA Astrodynamics Specialist Conference 2013, 2013-08-11 - 2013-08-15.
Heiligers, Jeannette and McInnes, Colin (2013) Cylindrically and spherically constrained families of non-Keplerian orbits. In: AAS/AIAA Astrodynamics Specialist Conference 2013, 2013-08-11 - 2013-08-15.
Simo, Jules and Fufaro, Roberto and Wibben, Daniel; Broschart, Stephen B. and Turner, James D. and Howell, Kathleen and Hoots, Felix, eds. (2013) Halo orbit targeting guidance via higher order sliding techniques. In: Advances in Astronautical Sciences. Advances in the Astronautical Sciences, 150 . Univelt Inc, USA, pp. 2341-2354.
Simo, Jules and Furfaro, Roberto and Wibben, Daniel (2013) Halo orbit targeting guidance via higher order sliding techniques. In: AAS/AIAA Astrodynamics Specialist Conference 2013, 2013-08-11 - 2013-08-15.
Masi, Luca and Vasile, Massimiliano (2013) Physarum KISS : An innovative algorithm for the preliminary analysis of multi-gravity assist interplanetary trajectories. In: EVOLVE 2013 International Conference, 2013-07-11 - 2013-07-13.
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Derivation of forces acting on the liquid weld metal based on arc pressure measurements produced using alternating shielding gases in the GTAW process. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09.
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) GMAW shielding gas flow optimisation by refinement of nozzle geometry. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09.
Ugbolue, Ukadike and Gislason, Magnus Kjartan and Fogg, Q.A. and Carter, M. and Riches, Philip and Rowe, Philip (2013) A pilot study to determine the tensile properties of the transverse carpal ligament. In: 24th Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09.
Murphy, Gavin Bruce and Counsell, John and Allison, John and Brindley, Joseph (2013) Calibrating a combined energy system analysis and controller design method with empirical data. Energy, 57. pp. 484-494. ISSN 1873-6785
Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161
Boyle, James (2013) A re-assessment of elastic follow-up in high temperature piping. International Journal of Pressure Vessels and Piping, 108-109. pp. 7-12. ISSN 0308-0161
Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161
Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 108-109. p. 1. ISSN 0308-0161
Dhinakaran, S. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2013) Steady flow of power-law fluids in a 1:3 planar sudden expansion. Journal of Non-Newtonian Fluid Mechanics, 198. pp. 48-58. ISSN 0377-0257
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Easily retrievable objects among the NEO population. Celestial Mechanics and Dynamical Astronomy, 116 (4). pp. 367-388. ISSN 0923-2958
Masi, Luca and Vasile, Massimiliano; (2013) A multi-directional modified Physarum algorithm for optimal multi-objective discrete decision making. In: EVOLVE. Studies in Computational Intelligence Series . Springer Berlin Heidelberg, MEX. ISBN 978-3-642-32725-4
Muscat, Martin and Camilleri, Duncan (2013) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. International Journal of Pressure Vessels and Piping, 108-109. pp. 61-66. ISSN 0308-0161
Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas and Oldroyd, Andrew and Mikkelsen, Torben and Astrup, P. (2013) A CFD technique for estimating the flow distortion effects on LiDAR measurements when made in complex flow fields. Engineering Applications of Computational Fluid Mechanics, 7 (3). pp. 324-334. ISSN 1994-2060
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) A comparison of variational, differential quadrature, and approximate closed-form solution methods for buckling of highly flexurally anisotropic laminates. Journal of Engineering Mechanics, 139 (8). pp. 1073-1083. ISSN 0733-9399
Yang, Liu and Thomason, James (2013) The thermal behaviour of glass fibre investigated by thermomechanical analysis. Journal of Materials Science, 48. pp. 5768-5775. ISSN 0022-2461
Nagel, Ulf and Kao, Chih-Chuan and Thomason, James (2013) Study on properties of composites reinforced by heat treated glass fibres simulating thermal recycling conditions. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Rudeiros Fernandez, Jose Luis and Thomason, James and Liggat, John and Soliman, M. (2013) Characterisation of the mechanical and thermal degradation behaviour of natural fibres for lightweight automotive applications. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Saez Rodriguez, Eduardo and Yang, Liu and Thomason, James (2013) Investigation of strength recovery of recycled heat treated glass fibres through chemical treatments. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Thomason, James and Yang, Liu (2013) Temperature dependence of the interfacial shear strength in glass reinforced polypropylene and epoxy composites. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) Optimisation of variable angle tow composite plates with free edge using lamination parameters. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Yang, Liu and Thomason, James (2013) Investigating Thermal Behaviour of Glass fibre By Thermomechanical Analysis : Poster. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Yang, Liu and Thomason, James (2013) Investigating thermal behaviour of glass fibre by thermomechanical analysis. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02.
Boyle, James (2013) The role of uncertainty in creep mechanics. In: 4th Canadian Conference on Nonlinear Solid Mechanics, 2013-07-23 - 2013-07-26.
Biggs, James (2013) Quadratic Hamiltonians on non-Euclidean spaces of arbitrary constant curvature. In: European Control Conference, ECC 2013, 2013-07-17 - 2013-07-19.
Pagnozzi, Daniele and Maclean, Craig David and Biggs, James (2013) A new approach to the solution of free rigid body motion for attitude manoeuvers. In: European Control Conference, ECC 2013, 2013-07-17 - 2013-07-19.
Gorash, Yevgen and Chen, Haofeng; (2013) Linear matching method for parametric studies of weldments creep-fatigue endurance. In: ASME 2013 Pressure Vessels and Piping Conference. ASME, FRA. ISBN 978-0-7918-5570-6
Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A new constitutively accurate lower bound direct shakedown method. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.
Ure, James and Chen, Haofeng and Tipping, David (2013) Verification of the linear matching method for limit and shakedown analysis by comparison with experiments. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.
Galindo-Rosales, Francisco J and Alves, M.A. and Oliveira, Monica (2013) Optimisation of microfluidic devices for extensional rheometry. In: VI Brazilian Conference on Rheology, 2013-07-10 - 2013-07-12.
Hughes, Ben Richard and Rezazadeh, Fatemeh and Chaudhry, Hassam Nasarullah (2013) Economic viability of incorporating multi-effect distillation with district cooling systems in the United Arab Emirates. Sustainable Cities and Society, 7. pp. 37-43. ISSN 2210-6707
Pescetelli, Fabrizio and Minisci, Edmondo and Brown, Richard (2013) Re-entry trajectory optimization for a SSTO vehicle in the presence of atmosheric uncertainties. In: 5th European Conference for Aeronautics and Space Sciences, EUCASS, 2013-07-01 - 2013-07-04.
Stickland, Matthew (2013) Northern Seas Wind Index Database. NORSEWInd, Stirling.
Haward, S.J. and Jaishankar, A. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2013) Extensional flow of hyaluronic acid solutions in an optimized micofluidic cross-slot device. Biomicrofluidics, 7 (4). Article 044108. ISSN 1932-1058
Lappa, Marcello (2013) On the variety of particle accumulation structures under the effect of g-jitters. Journal of Fluid Mechanics, 726. pp. 160-195. ISSN 0022-1120
McGinty, Sean and McCormick, Christopher and McKee, Sean and Wheel, Marcus and Kennedy, Simon and Oldroyd, Keith G. (2013) Simulating drug-eluting stents : progress made and the way forward. In: Special Session on Modelling and Simulation in Biology and Medicine (BIOMED 2013), 2013-07-29 - 2013-07-31.
Waseem, Affan and Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The influence of void size on the micropolar constitutive properties of model heterogeneous materials. European Journal of Mechanics - A/Solids, 40 (July-A). pp. 148-157. ISSN 0997-7538
Elharidi, Aly Mohamed Aly Hassan and Tuohy, Paul Gerard and Teamah, M. (2013) Facing the growing problem of the electric power consumption in Egyptian residential building using building performance simulation program. In: Building Simulation Cairo 2013 Conference, 2013-06-23 - 2013-06-24.
Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M. (2013) Buckling analysis of stiffened variable angle tow skins using energy methods. In: 17th International Conference on Composite Structures, ICCS17, 2013-06-17 - 2013-06-21.
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) Optimisation of postbuckling behaviour of variable angle tow composite plates. In: 17th International Conference on Composite Structures, ICCS17, 2013-06-17 - 2013-06-21.
Chen, Haofeng and Gorash, Yevgen (2013) Novel direct method on the life prediction of component under high temperature-creep fatigue conditions. In: 13th International Conference on Fracture, 2013-06-16 - 2013-06-21, The China National Convention Center (CNCC).
Sinn, Thomas and McRobb, Malcolm and Wujek, Adam and Skogby, Jerker and Rogberg, Fredrik and Wang, Junyi and Vasile, Massimiliano and Tibert, Gunnar (2013) Lessons learned from REXUS12'S Suaineadh Experiment : Spinning deployment of a space web in milli gravity. In: 21st ESA Symposium on European Rocket and balloon Programmes and Related Research, 2013-06-09 - 2013-06-13.
Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2013) Design and trade-offs of a pole-sitter mission. In: 3rd International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13.
Ritos, Konstantinos and Dongari, Nishanth and Borg, Matthew K. and Zhang, Yonghao and Reese, Jason M. (2013) Dynamics of nanoscale droplets on moving surfaces. Langmuir, 29 (23). pp. 6936-6943. ISSN 0743-7463
Oliveira, Monica and Haward, S.J. and Jaishankar, A. and McKinley, G.H. and Alves, M.A. (2013) Optimised shape cross-slot extensional rheometer for biofluid characterization. In: Gordon Conference on Physics and Chemistry of Microfluidics, 2013-06-09 - 2013-06-14, Lucca.
Gibbings, Alison and Vasile, Massimiliano and Watson, Ian A. (2013) Deflecting and exploring asteroids with lasers. In: University of Strathclyde Research Day 2013, 2013-06-07 - 2013-06-07.
Heiligers, Jeannette and McInnes, Colin (2013) Space Mission Warning System. In: University of Strathclyde Research Day 2013, 2013-06-07 - 2013-06-07.
Kim, Jae Min and Choi, Hyun Woong and Han, Se hee and Lee, Deuk Hwan and Yu, Ho Kyung (2013) ISO 13790 월간계산법 냉난방부하 유효계수 국내 사무소 건물 적용 타당성 연구. Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, 7 (2). pp. 126-134. ISSN 1976-6483
White, Craig and Colombo, Camilla and Scanlon, Thomas and McInnes, Colin and Reese, Jason (2013) Rarefied gas effects on the aerodynamics of high area-to-mass ratio spacecraft in orbit. Advances in Space Research, 51 (11). pp. 2112-2124. ISSN 0273-1177
Gauci, Thomas and Sant, Tonio and Muscat, Martin and Camilleri, Duncan and Mollicone, Pierluigi (2013) An investigation of different offshore wind turbine jacket support foundation models designed for central Mediterranean deep waters. Wind Engineering, 37 (3). pp. 229-242. ISSN 0309-524X
Groh, R.M.J. and Weaver, Paul M. and White, S. and Raju, Gangadharan and Wu, Zhangming (2013) A 2D equivalent single-layer fomulation for the effect of transverse shear on laminated plates with curvilinear fibres. Composite Structures, 100. pp. 464-478. ISSN 0263-8223
Jo, Chul-Hee and Kim, Do-Youb and Rho, Yu-Ho and Lee, Kang-Hee and Johnstone, Cameron (2013) FSI analysis of deformation along offshore pile structure for tidal current power. Renewable Energy, 54. pp. 248-252. ISSN 0960-1481
McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Hambling, S.J. (2013) Friction stir welding of thin DH36 steel plate. Science and Technology of Welding and Joining, 18 (5). pp. 441-450. ISSN 1362-1718
Minisci, Edmondo and Vasile, Massimiliano (2013) Robust design of a reentry unmanned space vehicle by multifidelity evolution control. AIAA Journal, 51 (6). pp. 1284-1295. ISSN 0001-1452
Mohammed, Musarrat H. and Banks, William M. and Hayward, David and Liggat, John J. and Pethrick, Richard A. and Thomson, Barry (2013) Physical properties of poly(ether ether ketone) exposed to simulated severe oilfield service conditions. Polymer Degradation and Stability, 98 (6). pp. 1264-1270. ISSN 0141-3910
Oddsdottir, G.L. and Kristjannson, E. and Gislason, Magnus Kjartan (2013) Database of movement control in the cervical spine : Reference normal of 180 asymptotic persons. Manual Therapy, 18 (3). pp. 206-210. ISSN 1356-689X
Frame, Jamie Campbell and Riches, Philip and Wheel, Marcus (2013) On surface effects in model heterogeneous materials and the consequences for a real material : cortical bone. In: 10th HSTAM 2013 International Congress on Mechanics, 2013-05-25 - 2013-05-27.
Dongari, Nishanth and White, Craig and Scanlon, Thomas and Zhang, Yonghao and Reese, Jason (2013) Effects of curvature on rarefied gas flows between rotating concentric cylinders. Physics of Fluids, 25 (5). 052003. ISSN 1070-6631
Campo-Deaño, Laura and Dullens, Roel P. and Aarts, Dirk and Pinho, F.T. and Oliveira, Monica (2013) Viscoelasticity of blood and viscoelastic blood analogues for use in polydymethysyloxane in vitro models of the circulatory system. Biomicrofluidics, 7 (3). Article 034102. ISSN 1932-1058
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) Postbuckling analysis of variable angle tow (VAT) composite plates. International Journal of Solids and Structures, 50 (10). pp. 1770-1780. ISSN 0020-7683
Cairns, Jonathan and McPherson, Norman and Galloway, Alexander and MacPherson, M. and McKechnie, C. (2013) Optimised penetration for fillet welding. In: 17th International Conference on Joining Materials, JOM 17, 2013-05-05 - 2013-05-08.
Anderson, Pamela and Macdonald, Malcolm (2013) Static highly elliptical orbits using hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (3). pp. 870-880. ISSN 1533-3884
Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick; (2013) Future Needs for Tribo-Corrosion Research and Testing. In: Tribo-Corrosion. ASTM International, USA, pp. 1-13.
Ceccaroni, Marta and Biggs, James (2013) Analytic perturbative theories in highly inhomogeneous gravitational fields. Icarus, 224 (1). pp. 74-85. ISSN 0019-1035
Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Regime mapping and the role of the intermediate region in wall-coated microreactors. Chemical Engineering Science, 94. pp. 166-184. ISSN 0009-2509
Md Mahbubur Rahman, M and Xu, Yixiang and Lim, James and Switzer, Christine and Hamilton, Robert and Comlekci, Tugrul and Pritchard, D. (2013) Behaviour of steel portal frames in fire : Comparison of implicit and explicit finite element methods. International Journal of Structural Stability and Dynamics, 13 (4). 1250058. ISSN 0219-4554
Owens, Steven Robert and Macdonald, Malcolm (2013) Analogy to bi-elliptic transfers incorporating high- and low-thrust. Journal of Guidance, Control and Dynamics, 36 (3). pp. 890-894. ISSN 1533-3884
Stack, Margaret and Crawley, Joshua and Miller, Mark; (2013) An approach to mapping the erosion-corrosion of stainless steel : Applications to tidal energy systems. In: Tribo-Corrosion. ASTM International, USA, pp. 1-28.
Allison, John and Murphy, Gavin Bruce (2013) Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation. In: 3rd International Conference on Microgeneration and Associated Technologies, 2013-04-15 - 2014-04-17, Castel dell’Ovo.
Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2013) Experimental characterization of the thrust induced by laser ablation on an asteroid. In: IAA Planetary Defense Conference, 2013-04-15 - 2013-05-19.
Kelly, N. J. and Hawkes, A. D. (2013) Load management of heat pumps using phase change heat storage. In: 3rd International Conference in Microgeneration and Related Technologies in Buildings, 2013-04-15 - 2013-04-17.
Tuohy, Paul Gerard and Clarke, Joe and Johnstone, Cameron (2013) Strategies for low carbon buildings : Assessment of design options and the translation of design intent into performance in practice. PhD thesis, University Of Strathclyde.
Vasile, Massimiliano and Vetrisano, Massimo and Gibbings, Alison and Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and Hopkins, John-Mark and Burns, David and McInnes, Colin and Colombo, Camilla and Branco, Joao and Wayman, Alastair and Eckersley, Steven (2013) Light-touch2 : a laser-based solution for the deflection, manipulation and exploitation of small asteroids. In: IAA Planetary Defense Conference, 2013-04-15 - 2013-05-19.
Murphy, Gavin Bruce and Allison, John and Counsell, John (2013) Benchmarking the effect of weather data upon energy estimation of UK homes. In: CIBSE Technical Symposium 2013, 2013-04-11 - 2013-04-12.
Lucking, Charlotte and McInnes, Colin (2013) Collision probability of satellite re-entry with area-to-mass-ratio augmentation. In: 9th Symposium on Small Satellites for Earth Observation, 2013-04-08 - 2013-04-12.
McGrath, Ciara and Macdonald, Malcolm (2013) Thermal analysis of the CubeSat First-MOVE in preparation for Launch using ESATAN-TMS r4. In: 9th Symposium on Small Satellites for Earth Observation, 2013-04-08 - 2013-04-12.
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) Feasible region of lamination parameters for optimisation of variable angle tow (VAT) composite plates. In: 54th AIAA/ASME Structures, Structural Dynamics and Materials Conference 2013, 2013-04-08 - 2013-04-11, Massachussetts.
Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2013) Optimized cross-slot microdevices for extensional rheometry. In: 8th Annual European Rheology Conference, AERC 2013, 2013-04-02 - 2013-04-05.
Sousa, P.C. and Carneiro, J. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2013) Human blood shear rheology. In: 8th Annual European Rheology Conference, AERC 2013, 2013-04-02 - 2013-04-05.
Bewick, Russell and Bewick, Charlotte and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Heliotropic dust rings for Earth climate engineering. Advances in Space Research, 51 (7). pp. 1132-1144. ISSN 0273-1177
Brindley, Joseph and Counsell, John and Zaher, Obadah Samir and Pearce, John G (2013) Design and simulation of a non-linear, discontinuous, flight control system using rate actuated inverse dynamics. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 227 (4). pp. 632-646. ISSN 0954-4100
Galloway, Alexander and McGhie, W and McPherson, Norman (2013) Thin plate buckling mitigation and reduction challenges for naval ships. Journal of Marine Engineering & Technology, 12 (2). pp. 3-10. ISSN 1476-1548
Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161
Kofoed, Jens Peter and Pecher, Arthur and Margheritini, L and Antonischen, M and Bittencourt, Claudio and Holmes, Brian and Retzler, Chris and Berthelsen, K and Le Crom, I and Neumann, E and Johnstone, Cameron and McCombes, Tom and Myers, L.E. (2013) A methodology for equitable performance assessment and presentation of wave energy converters based on sea trials. Renewable Energy, 52. pp. 99-110. ISSN 0960-1481
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2013) Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition. Thin-Walled Structures, 65. pp. 34-48. ISSN 0263-8231
Vasile, Massimiliano and Minisci, Edmondo and Quagliarella, Domenico (2013) Computational methods in engineering design and optimization : editorial article. Engineering Computations, 30 (4). p. 468. ISSN 0264-4401
Thomason, James (2013) On the application of Weibull analysis to experimentally determined single fibre strength distributions. Composites Science and Technology, 77. pp. 74-80. ISSN 0266-3538
Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2013) Large morphing spacecraft for flexible science missions. In: SET for Britain 2013, 2013-03-18 - 2013-03-18.
Gibbings, Alison and Vetrisano, Massimo (2013) Exploring and deflecting asteroids with laser ablation. In: SET for Britain 2013, 2013-03-18 - 2013-03-18.
Lappa, Marcello (2013) On the existence and multiplicity of one-dimensional solid particle attractors in time-dependent Rayleigh-Bénard convection. Chaos: An Interdisciplinary Journal of Nonlinear Science, 23 (1). 013105. ISSN 1054-1500
Vetrisano, Massimo and Gibbings, Alison (2013) Deflecting small asteroids using laser ablation : Deep space navigation and asteroid orbit control. In: SET for Britain 2013, 2013-03-18 - 2013-03-18.
Lockerby, Duncan A. and Duque-Daza, Carlos A. and Borg, Matthew Karl and Reese, Jason (2013) Time-step coupling for hybrid simulations of multiscale flows. Journal of Computational Physics, 237. pp. 344-365. ISSN 0021-9991
Zheng, Rongye and Sun, Jinju and Liu, Haihu (2013) A modeling approach to droplet contact-line motion dynamics in high-density-ratio two-phase flow. Computers and Fluids, 73. pp. 175-186. ISSN 0045-7930
Mushet, Garrie and Mingotti, Giorgio and Colombo, Camilla and McInnes, Colin (2013) Autonomous satellite constellation for enhanced Earth coverage using coupled selection equations. In: 7th International Workshop on Satellite Constellation and Formation Flying, 2013-03-13 - 2013-03-15.
Walther, Jens H. and Ritos, Konstantinos and Cruz-Chu, Eduardo R. and Megaridis, Constantine M. and Koumoutsakos, Petros (2013) Barriers to superfast water transport in carbon nanotube membranes. Nano Letters, 13 (5). pp. 1910-1914. ISSN 1530-6992
Cater, Stephen R. and Martin, Jonathan and Galloway, Alexander and McPherson, Norman (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. In: Symposium on Friction Stir Welding and Processing, 2013-03-03.
Boyle, James; Altenbach, Holm and Kruch, Serge, eds. (2013) Some consequences of stress range dependent constitutive models in creep. In: Advanced Structured Materials. Springer-Verlag, FRA, pp. 77-86.
Mackenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Case Studies, 10. pp. 19-30. ISSN 1642-236X
Madhlopa, Amos and Clarke, Joseph Andrew (2013) Computation of irradiance in a solar still by using a refined algorithm. Renewable Energy, 51. pp. 13-21. ISSN 0960-1481
Meng, Jian-Ping and Zhang, Yonghao and Hadjiconstantinou, Nicolas and Radtke, G.A. and Shan, Xiaowen (2013) Lattice ellipsoidal statistical BGK model for thermal non-equilibrium flows. Journal of Fluid Mechanics, 718. pp. 347-370. ISSN 0022-1120
Sanchez Cuartielles, Joan-Pau and Colombo, Camilla (2013) Impact hazard protection efficiency by a small kinetic impactor. Journal of Spacecraft and Rockets, 50 (2). pp. 380-393. ISSN 0022-4650
Yang, Liu and Thomason, James (2013) Effect of Silane coupling agent on mechanical performance of glass fibre. Journal of Materials Science, 48 (5). pp. 1947-1954. ISSN 0022-2461
Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2013) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. Computers and Structures, 118. pp. 59-65. ISSN 0045-7949
Scheurich, Frank and Brown, Richard (2013) Modelling the aerodynamics of vertical-axis wind turbines in unsteady wind conditions. Wind Energy, 16 (2). pp. 91-107. ISSN 1095-4244
Hong, Jun and Kelly, Nicolas and Thomson, M. and Richardson, I. (2013) Assessing heat pumps as flexible load. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (1). pp. 30-42. ISSN 0957-6509
Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2013) Novel orbits of Mercury and Venus enabled using low-thrust propulsion. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.
Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Passive sorting of asteroid material using solar radiation pressure. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.
Owens, Steven Robert and Macdonald, Malcolm (2013) Hohmann spiral transfer with inclination change performed by low-thrust system. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.
Wibben, Daniel and Gaudet, Brian and Furfaro, Roberto and Simo, Jules (2013) Multiple sliding surface guidance for planetary landing : Tuning and optimization via reinforcement learning. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.
Wibben, Daniel and Gaudet, Brian and Furfaro, Roberto and Simo, Jules; Tanygin, Sergei and Park, Ryan S. and Starchville Jnr., Thomas F. and Newman, Lauri K., eds. (2013) Multiple sliding surface guidance for planetary landing : tuning and optimization via reinforcement learning. In: Advances in the Astronautical Sciences. Advances in the Astronautical Sciences, 148 . Univelt Inc, USA, pp. 1881-1900. ISBN 9780877035978
Zuiani, Federico and Kawakatsu, Yasuhiro and Vasile, Massimiliano (2013) Multi-objective optimisation of many-revolution, low-thrust orbit raising for Destiny mission. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.
Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) Numerical modelling of hailstone impact on the leading edge of a wind turbine blade. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07.
Elmayyah, Wael and Dempster, William (2013) Prediction of two-phase flow through a safety relief valve. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227 (1). pp. 42-55. ISSN 0954-4089
Quarta, Alessandro A. and Izzo, Dario and Vasile, Massimiliano (2013) Time-optimal trajectories to circumsolar space using solar electric propulsion. Advances in Space Research, 51 (3). pp. 411-422. ISSN 0273-1177
Burt, Graeme and Kelly, Nicolas and Entchev, Evgueniy and Hammond, Geoffrey P (2013) Microgeneration and related energy technologies and practices for low-carbon buildings : Guest Editorial. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227. pp. 3-7. ISSN 0957-6509
Dadzie, Kokou (2013) A thermo-mechanically consistent Burnett regime continuum flow equation without Chapman-Enskog expansion. Journal of Fluid Mechanics, 716. pp. 6-11. ISSN 0022-1120
Hasager, C.B. and Stein, F.P. Detlef and Hagemann, Saskia and Pena, Alfredo and Mikkelsen, Torben and Stickland, Matthew and Courtney, Michael and Oldroyd, Andrew (2013) NORSEWIND - Array of Wind Lidars and Meteorological Masts Offshore. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07.
Murphy, Gavin Bruce and Counsell, John and Baster, Michael Eric and Allison, John and Counsell, Sean (2013) Symbolic modelling and predictive assessment of air source heat pumps. Building Services Engineering Research and Technology, 34 (1). pp. 23-39. ISSN 0143-6244
White, Craig and Borg, Matthew K. and Scanlon, Thomas J. and Reese, Jason M. (2013) A DSMC investigation of gas flows in micro-channels with bends. Computers and Fluids, 71. pp. 261-271. ISSN 0045-7930
Vasile, Massimiliano and Vetrisano, Massimo and Gibbings, Alison and Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and Burns, David and Hopkins, John-Mark and Colombo, Camilla and Branco, Joao and Wayman, Alastair and Eckersley, Steven (2013) Light Touch2 : Effective solutions to asteroid manipulation. In: ESA/ESTEC SYSNova Space Concept Challenge, 2013-01-21 - 2013-01-22.
Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2013) A multiscale method for micro/nano flows of high aspect ratio. Journal of Computational Physics, 233. pp. 400-413. ISSN 0021-9991
Sharifi, Shayan and Stack, Margaret and Stephen, L and Li, Wang-Long and Wang, Moo-Chin (2013) Micro-abrasion of Y-TZP in tea. Wear, 297 (1-2). pp. 713-721. ISSN 0043-1648
Sinn, Thomas and Vasile, Massimiliano (2013) Multibody dynamics for biologically inspired smart space structure. In: AIAA SciTech 2014, 2014-01-13 - 2014-01-17, Washington.
Liu, Haihu and Valocchi, Albert J. and Zhang, Yonghao and Kang, Q.J. (2013) Phase-field-based lattice Boltzmann finite difference model for simulating thermocapillary flows. Physical Review E, 87 (1). 013010. ISSN 2470-0053
Lappa, Marcello (2013) Assessment of the role of axial vorticity in the formation of particle accumulation structures in supercritical Marangoni and hybrid thermocapillary-rotation-driven flows. Physics of Fluids, 25 (1). 012101. ISSN 1089-7666
Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The micropolar elastic behaviour of model macroscopically heterogeneous materials. International Journal of Solids and Structures, 50 (1). 246–255. ISSN 0020-7683
Anderson, Pamela and Macdonald, Malcolm (2013) Extension of highly elliptical Earth orbits using continuous low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (1). pp. 282-292. ISSN 1533-3884
Chen, Haofeng and Ure, James Michael and Tipping, David (2013) Calculation of a lower bound ratchet limit part 1 – Theory, numerical implementation and verification. European Journal of Mechanics - A/Solids, 37. pp. 361-368. ISSN 0997-7538
Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2013) Orbit evolution, maintenance and disposal of SpaceChip swarms through electro-chromic control. Acta Astronautica, 82 (1). pp. 25-37. ISSN 0094-5765
Dongari, Nishanth and Barber, Robert W. and Emerson, David and Stefanov, Stefan and Zhang, Yonghao (2013) The effect of Knudsen layers on rarefied cylindrical Couette gas flows. Microfluidics and Nanofluidics, 14 (1-2). pp. 31-43. ISSN 1613-4982
Galindo-Rosales, Francisco J and Alves, M.A. and Oliveira, Monica (2013) Microdevices for extensional rheometry of low viscosity elastic liquids : a review. Microfluidics and Nanofluidics, 14 (1-2). pp. 1-19. ISSN 1613-4982
Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Olsson Robbie, Mikael and Zhang, Yuxuan (2013) The metallurgy, mechanics, modelling and assessment of dissimilar material brazed joints. Journal of Nuclear Materials, 432 (1-3). pp. 42-51. ISSN 0022-3115
Johnstone, Cameron and Pratt, D. and Clarke, Joseph and Grant, Andrew (2013) A techno-economic analysis of tidal energy technology. Renewable Energy, 49. pp. 101-106. ISSN 0960-1481
Li, Hongjun and Wood, James and McCormack, Ross and Hamilton, Robert (2013) Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure. International Journal of Pressure Vessels and Piping, 101. pp. 154-160. ISSN 0308-0161
Ure, James Michael and Chen, Haofeng and Tipping, David (2013) Calculation of a lower bound ratchet limit part 2 : Application to a pipe intersection and dissimilar material join. European Journal of Mechanics - A/Solids, 37. pp. 369-378. ISSN 0997-7538
Wood, James and Prinja, Nawal and Morris, Tim (2013) Transferring simulation skills from other industries to nuclear. Nuclear Future, 9 (1). pp. 1-7. ISSN 1745-2058
Anderson, Pamela and Macdonald, Malcolm (2013) The Orbital Dynamics of Advanced Planetary Observation Systems. PhD thesis, Mechanical And Aerospace Engineering.
Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2013) Manoeuvring considerations for quasi-periodic trajectories. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.
Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2013) Optimal manoeuvring between quasi-periodic orbits. In: 5th International Conference on Spacecraft Formation Flying Missions and Technologies, 2013-05-29 - 2013-05-31, Hilton Munich City.
Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2013) The micropolar behaviour of cortical bone : size and surface effects in 3 point bending. In: XXIV Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09.
Gilroy, Daniel and Riches, Philip and Wheel, Marcus (2013) Finite element analysis of a sliding hip screw. In: XXIV Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09.
Gorman, Daniel and Horacek, Jaromir and Mulholland, Anthony and Gorman, Marie N. (2013) Analysis and interpretation of compressible fluid interaction upon the vibration of a circular membrane. Acta Technica, 58 (4). pp. 443-461. ISSN 0001-7043
Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew (2013) Development of an experimental methodology for appraising the dynamic response of tethered tidal turbines. PhD thesis, University Of Strathclyde.
2012
Haward, S.J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Elongational flow and elastic intabilities in an optimized-shape cross-slot extensional rheometer. In: British Society of Rheology Midwinter Meeting, 2012-12-17 - 2012-12-18.
Heiligers, Jeannette and McInnes, Colin and Biggs, James and Ceriotti, Matteo (2012) Non-Keplerian orbits using hybrid solar sail propulsion for Earth applications. PhD thesis, Mechanical And Aerospace Engineering.
Haward, S.J. and Jaishankar, A. and Oliveira, Monica and Alves, M.A. and McKinley, G.H.; (2012) Extensional flow of hyaluronic acid solutions in an optimized microfluidic cross-slot device. In: Microfluidics 2012. UNSPECIFIED, DEU.
Jackson, Colin and Wrzesien, Andrzej and Johnston, Ross P. and Uzzaman, Asraf and Lim, James (2012) Effect of reduced joint strength and semi-rigid joints on cold-formed steel portal frames. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.
Li, Jonathan and Zhang, Yonghao and Reese, Jason (2012) Multiphase lattice Boltzmann simulations of droplets in microchannel networks. In: 3rd European Conference on Microfluidics, Microfluidics 2012, 2012-12-03 - 2012-12-05.
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Experimental and analytical studies of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Parametric studies and design recommendations of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.
Boyle, James (2012) The effect of material models on elastic follow-up. Journal of Pressure Vessel Technology, 134 (6). 061210. ISSN 0094-9930
Bennet, Derek James and McInnes, Colin (2012) Pattern transition in spacecraft formation flying using bifurcating potential field. Aerospace Science and Technology, 23 (1). pp. 250-262. ISSN 1270-9638
Borg, Simon Paul and Kelly, Nicolas (2012) The development and calibration of a generic dynamic absorption chiller model. Energy and Buildings, 55. pp. 533-544. ISSN 0378-7788
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Techno-economic evaluation of reducing shielding gas consumption in GMAW whilst maintaining weld quality. The International Journal of Advanced Manufacturing Technology, 63 (9-12). pp. 975-985. ISSN 1433-3015
Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2012) Orbital dynamics of high area-to-mass ratio spacecraft with J2 and solar radiation pressure for novel Earth observation and communication services. Acta Astronautica, 81 (1). pp. 137-150. ISSN 0094-5765
Porteous, C. and Sharpe, Timothy and Menon, R. and Shearer, D. and Musa, H. and Sanders, C.H. and Baker, P.H. and Strachan, P. A. and Kelly, N. J. and Markopoulos, A. (2012) Energy and environmental appraisal of domestic laundering appliances. Building Research and Information, 40 (6). pp. 679-699. ISSN 1466-4321
Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2012) Divergent streamlines and free vortices in Newtonian fluid flows in microfluidic flow focusing devices. Journal of Fluid Mechanics, 711. pp. 171-191. ISSN 0022-1120
Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22.
Bewick, R. and Sanchez Cuartielles, J.P. and McInnes, C.R. (2012) Gravitationally bound geoengineering dust shade at the inner Lagrange point. Advances in Space Research, 50 (10). pp. 1405-1410. ISSN 0273-1177
Thomason, James and Yang, Liu (2012) A novel combination of micromechanical testing and thermal analysis : to investigate the temperature dependence of interfacial adhesion in fibre reinforced polymer composites. In: TA Instruments Users Meeting, 2012-11-06 - 2012-11-06. (Unpublished)
Ceriotti, Matteo and Diedrich, Benjamin and McInnes, Colin (2012) Novel mission concepts for polar coverage : An overview of recent developments and possible future applications. Acta Astronautica, 80. pp. 89-104. ISSN 0094-5765
Gislason, Magnus Kjartan and Stansfield, Benedict and Bransby-Zachary, Marc and Hems, Tim and Nash, David (2012) Load transfer through the radiocarpal joint and the effects of partial wrist arthrodesis on carpal bone behaviour : a finite element study. Journal of Hand Surgery (European Volume), 37 (9). pp. 871-878. ISSN 1753-1934
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco (2012) Transfers to distant periodic orbits around the Moon via their invariant manifolds. Acta Astronautica, 79. pp. 20-32. ISSN 0094-5765
Trendafilova, Irina and Manoach, Emil; Rigatos, Gerassimos, ed. (2012) Vibration-based methods for structural and machinery fault diagnosis based on nonlinear dynamics tools. In: Fault Diagnosis in Robotic and Industrial Systems. IConcept Press LTD, Article 6. ISBN 978-1461098744
Wu, Zhangming and Weaver, Paul M. and Raju, Gangadharan and Kim, Byung Chul (2012) Buckling analysis and optimisation of variable angle tow composite plates. Thin-Walled Structures, 60. pp. 163-172. ISSN 0263-8231
Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2012) Extension of Martian orbits using continuous low-thrust propulsion. In: 23rd Space Flight Dynamics Symposium, 2012-10-29 - 2012-11-02.
Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2012) Uncontrolled spacecraft formations on two-dimensional invariant tori. In: 23rd International Symposium on Spaceflight Dynamics, 2012-10-29 - 2012-11-02.
Mushet, Garrie and Colombo, Camilla and McInnes, Colin (2012) Autonomous control of a reconfigurable constellation of satellites on geostationary orbit with artificial potential fields. In: 23rd International Symposium on Space Flight Dynamics, ISSFD 2012, 2012-10-29 - 2012-11-02.
Vetrisano, Massimo and Yang, Huixin and Vasile, Massimiliano and Zhang, Wei (2012) Autonomous navigation of spacecraft formations for asteroid exploration. In: 23rd International Symposium on Spaceflight Dynamics, 2012-10-29 - 2012-11-02.
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: 21st International Specialty Conference on Cold Formed Steel Structures, 2012-10-24 - 2013-03-25.
Tuohy, Paul Gerard and Murphy, Gavin Bruce and Devici, Gokay (2012) Lessons from post occupancy evaluation and monitoring of the 1st Passive House in Scotland. In: Passivhus Norden Conference, 2012-10-22 - 2012-10-23.
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter (2012) Regeneration of the performance of glass fibre recycled from end-of-life composites or glass fibre waste. In: International Glass Fiber Symposium, 2012-10-16 - 2012-10-19.
Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter (2012) Regeneration of the performance of glass fibre recycled from end-of-life composites or glass fibre waste. In: International Glass Fiber Symposium, 2012-10-16 - 2012-10-19.
Gislason, Magnus Kjartan and Nash, David; Ebrahimi, Farzad, ed. (2012) Finite element modelling of a multi bone joint : The human wrist. In: Finite element analysis. InTech, Croatia, pp. 77-98. ISBN 9789535107699
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2012) Post-buckling of variable angle tow composites using variational approach. In: 3rd Aircraft Structural Design Conference, 2012-10-09 - 2012-10-11, Royal Aeronautical Society.
Borggrafe, Andreas and Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Coupled orbit and attitude dynamics of a reconfigurable spacecraft with solar radiation pressure. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Ceccaroni, Marta and Biggs, James (2012) Analytical perturbation method for frozen orbits around the asteroid 433 Eros. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Ceriotti, Matteo and McInnes, Colin (2012) Design of trajectories for continuous polar Earth observation in the Earth-Moon system. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Clark, Ruaridh and Sinn, Thomas and Lucking, Charlotte and Donaldson, Nathan and Brown, Roy Hutton and Parry, Thomas (2012) StrathSat-R : Deploying inflatable CubeSat structures in micro gravity. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Colombo, Camilla and Xu, Ming and McInnes, Colin (2012) Stabilisation of the hyperbolic equilibrium of high area-to-mass spacecraft. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2012) Hybrid low-thrust transfers to eight-shaped orbits for polar observation. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Komninou, Eirini and Vasile, Massimiliano and Minisci, Edmondo (2012) Optimal dynamic operations scheduling for small-scale satellites. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Lowe, Christopher and Macdonald, Malcolm and Greenland, Stephen Charles and McKee, David (2012) Tidal synchronous orbit : A novel approach to remote sensing of oceanic regions. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Mission and system design of a 3U CubeSat for passive GTO to LEO transfer. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Maclean, Craig David and Biggs, James (2012) Attitude motion planning for a spin stabilised disk sail. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Owens, Steven Robert and Macdonald, Malcolm (2012) An extension and numerical analysis of the Hohmann spiral transfer. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Punzo, Giuliano and Dobie, Gordon and Bennet, Derek James and Jamieson, Jonathan and Macdonald, Malcolm (2012) Low-cost, multi-agent systems for planetary surface exploration. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and Alessi, Elisa Maria and McInnes, Colin (2012) Gravitational capture opportunites for asteroid retrieval missions. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Sinn, Thomas and McRobb, M. and Wujek, Adam and Skogby, Jerker and Rogberg, Fredrik and Wang, Junyi and Vasile, Massimiliano and Tibert, Gunnar (2012) Results of REXUS12's Suaineadh Experiment : Deployment of a spinning space web in micro gravity conditions. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Sinn, Thomas and Vasile, Massimiliano (2012) Bio-inspired programmable matter for space applications. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Van Der Weg, Willem Johan and Vasile, Massimiliano (2012) High area-to-mass ratio hybrid propulsion Earth to Moon transfers. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Vasile, Massimiliano (2012) Fractionated solar power satellite for regional coverage. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Vasile, Massimiliano and Maddock, Christie (2012) Design of a formation of solar pumped lasers for asteroid deflection. Advances in Space Research, 50 (7). pp. 891-905. ISSN 0273-1177
Vetrisano, Massimo and Vasile, Massimiliano (2012) Collaborative navigation and control of disaggregated spacecraft in the proximity of minor bodies. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.
Zuiani, Federico and Vasile, Massimiliano; (2012) Extension of finite perturbative elements for multi-revolution, low-thrust propulsion transfer optimisation. In: 63rd International Astronautical Congress 2012, IAC 2012. International Astronautical Federation (IAF), ITA, pp. 5498-5511. ISBN 9781622769797
Ceccaroni, Marta and Biggs, James and Biasco, Luca (2012) Analytic estimates and topological properties of the weak stability boundary. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 1-24. ISSN 0923-2958
Ceriotti, Matteo and McInnes, Colin (2012) Natural and sail-displaced doubly-symmetric Lagrange point orbits for polar coverage. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 151-180. ISSN 0923-2958
Dongari, Nishanth and Agrawal, Anupam (2012) Corrigendum to "Modeling of Navier-Stokes equations for high Knudsen number gas" flows. International Journal of Heat and Mass Transfer, 55 (21-22). p. 6291. ISSN 0017-9310
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Design of optimal Earth pole-sitter transfers using low-thrust propulsion. Acta Astronautica, 79. pp. 253-268. ISSN 0094-5765
Nicholls, William and Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2012) Water transport through carbon nanotubes with defects. Molecular Simulation, 38 (10). pp. 781-785. ISSN 1029-0435
Vetrisano, M. and Van der Weg, W. and Vasile, M. (2012) Navigating to the Moon along low-energy transfers. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 25-53. ISSN 0923-2958
Yang, Liu and Thomason, James (2012) Development and application of micromechanical techniques for characterising interfacial shear strength in fibre-thermoplastic composites. Polymer Testing, 31 (7). 895–903. ISSN 0142-9418
Zuiani, Federico and Gibbings, Alison and Vetrisano, Massimo and Rizzi, Francesco and Martinez, Cesar and Vasile, Massimiliano (2012) Orbit determination and control for the European Student Moon Orbiter. Acta Astronautica, 79. pp. 67-78. ISSN 0094-5765
Zuiani, Federico and Vasile, Massimiliano and Gibbings, Alison (2012) Evidence-based robust design of deflection actions for near Earth objects. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 107-136. ISSN 0923-2958
Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27.
Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2012) Analytical method for perturbed frozen orbit around an asteroid in highly inhomogeneous gravitational fields. In: 2012 Analytical Methods in Celestial Mechanics, 2012-09-26 - 2012-09-29.
Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Novel pole-sitter mission concepts for continuous polar remote sensing. In: SPIE Remote Sensing Conference 2012, 2012-09-24 - 2012-09-27.
Haward, S.J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Optimized cross-slot flow geometry for microfluidic extension rheometry. Physical Review Letters, 109 (12). 128301. ISSN 1079-7114
Trendafilova, Irina and Pallazetti, Roberto (2012) Delamination assessment in structures made of composites based on signal cross-correlation. In: ISMA2012 International Conference on Noise and Vibration Engineering, 2012-09-17 - 2012-09-19.
Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio and Padulo, M. (2012) Robust aerodynamic design optimization of variable speed wind turbine rotors. In: 10th Aerodynamic Design Optimisation Seminar, ADOS 2012, 2012-09-13 - 2012-09-14.
Clarke, Joseph Andrew and Cockroft, Jeremy and Hand, Jon and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) Embedding building simulation constructs within focused applications. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11.
Clarke, Joseph Andrew and Hand, Jon and Kelly, Nicolas and Malik, Asma and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) A data model for integrated building performance simulation. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11.
Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic T-channels for extensional rheology. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14.
Oliveira, Monica and Haward, S.J. and McKinley, G.H. and Alves, M.A. (2012) Cross-slot flow for extensional rheometry : From optimization to experimentation. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14.
Sousa, P.C. and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2012) Flow of a blood analogue fluid through microchannels with a hyperbolic-shaped stenosis. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14.
Sousa, P.C. and Afonso, A.M. and Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2012) Microfluidics with non-Newtonian fluids and elastic instabilities. In: 9th European Fluid Mechanics Conference, EFMC9, 2012-09-09 - 2012-09-13.
Gauci, Thomas and Sant, Tonio and Muscat, Martin and Mollicone, Pierluigi and Camilleri, Duncan (2012) An investigation of different offshore wind turbine jacket support foundation models designed for Central Mediterranean Deep Waters. In: OWEMES 2012, Offshore Wind & Other Marine Renewable Energies in Mediterranean & European Seas Conference, 2012-09-05 - 2012-09-07, Hortensia Hall, Conference Centre, “Fiera di Roma”.
Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07. (Unpublished)
Guechaichia, Abdelhamid and Trendafilova, Irina (2012) A simple frequency-based delamination detection and localization method without baseline model. Journal of Physics Conference Series, 382 (1). 012033. ISSN 1742-6588
Johnson, Les and Young, Roy and Barnes, Nathan and Friedman, Louis and Lappas, Vaios and McInnes, Colin (2012) Solar Sails : Technology and demonstration status. International Journal of Aeronautical and Space Sciences, 13 (4). pp. 421-427. ISSN 2093-274X
Kokogiannakis, Georgios and Tuohy, Paul Gerard and Darkwa, Jo (2012) Impact of material surface properties on building performance across a variety of climates. International Journal of Low-Carbon Technologies, 7 (3). pp. 181-187. ISSN 1748-1317
Le, Nam Tuan Phuong and White, Craig and Reese, Jason and Myong, R.S. (2012) Langmuir-Maxwell and Langmuir-Smoluchowski boundary conditions for thermal gas flow simulations in hypersonic aerodynamics. International Journal of Heat and Mass Transfer, 55 (19-20). pp. 5032-5043. ISSN 0017-9310
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Electrochromic orbit control for smart-dust devices. Journal of Guidance, Control and Dynamics, 35 (5). pp. 1548-1558. ISSN 1533-3884
Macdonald, Malcolm and Anderson, Pamela and Warren, Carl (2012) A novel design concept for space-based polar remote sensing. In: SPIE Remote Sensing Conference 2012, 2012-09-24 - 2012-09-27.
Pescetelli, Fabrizio and Minisci, Edmondo and Maddock, Christie and Taylor, Ian and Brown, Richard (2012) Ascent trajectory optimisation for a single-stage-to-orbit vehicle with hybrid propulsion. In: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, 2012-09-24 - 2012-09-28.
Raju, Gangadharan and Wu, Zhangming and Kim, Byung Chul and Weaver, Paul M. (2012) Prebuckling and buckling analysis of variable angle tow plates with general boundary conditions. Composite Structures, 94 (9). pp. 2961-2970. ISSN 0263-8223
Telfer, C.G. and Stack, Margaret and Jana, Buddhadev (2012) Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries. Tribology International, 53. pp. 35-44. TRIBINT-D-11-00532R1. ISSN 0301-679X
Trendafilova, Irina (2012) An inverse vibration-based approach towards modelling and damage identification in nonlinearly vibrating structures. Application for delamination detection in a composite beam. Journal of Physics Conference Series, 382 (1). 012030. ISSN 1742-6588
Wuilbercq, Romain and Ahmad, Abdul Ossman and Scanlon, Thomas and Brown, Richard (2012) Towards robust aero-thermodynamic predictions for re-usable single-stage to orbit vehicles. In: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, 2012-09-24 - 2012-09-28.
Thomason, James (2012) Glass Fibre Sizings : A Review of the Scientific Literature. Create Space Independent Publishing Platform. ISBN 9780957381414
Lowe, Christopher John and Macdonald, Malcolm and Greenland, Stephen and McKee, David (2012) Charybdis : The next generation in ocean colour and biogeochemical remote sensing. In: 26th Annual AIAA/USU Conference on Small Satellites, 2012-08-13 - 2012-08-16.
Reiss, Philip and Hager, P and Bewick (Lucking), Charlotte and Macdonald, Malcolm (2012) New methodologies for the thermal modelling of CubeSats. In: 26th Annual AIAA/USU Conference on Small Satellites, 2012-08-13 - 2012-08-16.
Masi, Luca and Vasile, Massimiliano (2012) Optimal multi-objective discrete decision making using a multidirectional modified Physarum solver. In: EVOLVE 2012 International Conference, 2012-08-07 - 2012-08-09.
Vasile, Massimiliano and Zuiani, Federico (2012) Evidence-based robust design optimisation of space systems. In: EVOLVE 2012 International Conference, 2012-08-07 - 2012-08-09.
Campo-Deaño, Laura and Dullens, Roel P. and Carneiro, R.D. and Pinho, F.T. and Oliveira, Monica (2012) A new blood analogue solution applications from micro- to milli-channels. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2012) Study on the blockage mechanism in low viscosity Boger-like fluid flows through unconsolidated beds. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Carneiro, J. and Campo-Deaño, Laura and Oliveira, Monica and Pinho, F.T. (2012) Flow of blood analogue fluids through simplified intercranial aneurisms : effect of geometrical parameters. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Galindo-Rosales, Francisco J and Aarts, D and Alves, M.A. and Oliveira, Monica (2012) A novel use for the cross-slot microfluidic device in extensional micro-rheometry. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) Assessing the flow of low viscosity Boger-like fluids through microfluidic analogues of a porous medium. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic devices for application in extensional rheology. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Haward, S.J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Experimental validation of an optimized cross-slot geometry for extensional rheometry of complex fluids. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Oliveira, Monica and Afonso, A.M. and Pinho, F.T. and Alves, M.A. (2012) High Deborah-number contraction flows in microdevices. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Silva, A.F. and Alves, M.A. and Oliveira, Monica (2012) Numerical study of the flow hemodynamics in intracranial aneurisms. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) Effect of the aspect ratio on the viscoelastic fluid flow in a cross-slot micro-geometry. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.
Thomason, James and Carruthers, John (2012) Natural fibre cross sectional area, its variability and effects on the determination of fibre properties. Journal of Biobased Materials and Bioenergy, 6 (4). pp. 424-439. ISSN 1556-6560
Abid, Muhammad and Parvez, Shahid and Nash, David and Fawad, Hassan (2012) 3 Dimensional simulation of stationary gas tungsten arc welding of L-shape, V-shape and open-corner joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1354-1368. ISSN 2041-2975
Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2012) Potential of laser-induced ablation for future space applications. Space Policy, 28 (3). pp. 149-153. ISSN 0265-9646
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) A passive satellite deorbiting strategy for medium Earth orbit using solar radiation pressure and the J(2) effect. Acta Astronautica, 77. pp. 197-206. ISSN 0094-5765
Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2012) Incorporation of TiC on Alsi 4340 low alloy steel surfaces via tungsten inert gas arc melting. Advanced Materials Research, 445. pp. 655-660. ISSN 1022-6680
Ramsey, Gemma and Galloway, Alexander and McPherson, Norman and Campbell, Stuart and Scanlon, Thomas (2012) A computational fluid dynamic analysis of the effect of side draughts and nozzle diameter on shielding gas coverage during gas metal arc welding. Journal of Materials Processing Technology, 212 (8). pp. 1694-1699. ISSN 0924-0136
Costa, E.D. and Carneiro, J. and Oliveira, Monica and Campos, J.B.L.M. and Miranda, J.M. (2012) Fabrication of milli-scale channels for hemodynamc studies. In: 15th International Conference on Experimental Mechanics, 2012-07-22 - 2012-07-27.
Docherty, Stephanie and Nicholls, William and Borg, Matthew Karl and Reese, Jason (2012) Boundary conditions for molecular dynamics simulation of water transport through carbon nanotubes. In: 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2012-07-16 - 2012-07-18.
Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) Linear matching method on the evaluation of cyclic behaviour with creep effect. In: ASME Pressure Vessels and Piping Conference 2012, 2012-07-15 - 2012-07-20.
Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.
Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.
Sinn, Thomas and Doule, Ondrej (2012) Inflatable structures for Mars Base 10. In: 42nd International Conference on Environmental Systems, ICES 2012, 2012-07-15 - 2012-07-19, California.
Babac, Gulru and Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Thermal transpiration of nanoscale gas flow. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.
Dadzie, Kokou and Dongari, Nishanth (2012) Transition regime analytical solution to gas mass flow rate in a rectangular micro channel. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.
Dongari, Nishanth and White, Craig and Scanlon, Thomas and Zhang, Yonghao and Reese, Jason (2012) Rarefaction effects in gas flows over curved surfaces. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Molecular dynamics simulations of high speed rarefied gas flows. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.
Ritos, Konstantinos and Dongari, Nishanth and Zhang, Yonghao and Reese, Jason; (2012) Dynamic wetting on moving surfaces : A molecular dynamics study. In: Nanochannels, Microchannels and Minichannels. ASME, PRI. ISBN 978-0-7918-4479-3
Crowley, B. J. B. and Bingham, R. and Evans, R. G. and Gericke, D. O. and Landen, O. L. and Murphy, C. D. and Norreys, P. A. and Rose, S. J. and Tschentscher, Th and Wang, C. H. -T and Wark, J. S. and Gregori, G. (2012) Testing quantum mechanics in non-Minkowski space-time with high power lasers and 4th generation light sources. Scientific Reports, 2. 491. ISSN 2045-2322
Pierce, Stephen and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and McInnes, Colin and Biggs, James and Macdonald, Malcolm and Bennet, Derek James (2012) Reconfigurable robotic platforms for structural health monitoring. In: 6th European Workshop on Structural Health Monitoring & 1st European Conference of the Prognostics and Health Management (PHM) Society, 2012-07-03 - 2012-07-06.
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben; Liew, J Y Richard and Lee, Seiw Chin, eds. (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Research Publishing Services, National University of Singapore, Singapore, pp. 179-186. ISBN 9789810726157
Babaç, Gulru and Ritos, Konstantinos and Reese, Jason M; (2012) Molecular dynamics simulations of mass transfer due to a temperature gradient. In: Proceedings of CHT-12. Begell House, Danbury, CT..
Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Modelling micropolar behaviour in cortical bone. Journal of Biomechanics, 45 (s1). S52-S52. ISSN 0021-9290
Sasagawa, K and Coupaud, S. and Gislason, Magnus Kjartan and Hatem, Q and Tanner, Elizabeth and Allan, David and Tanabe, Y (2012) A finite element modelling for the tibia of a spinal cord injured patient. In: 18th Congress of the European Society of Biomechanics, 2012-07-01 - 2012-07-04.
Costa, E.D. and Carneiro, J. and Oliveira, M.S.N. and Campos, J.B.L.M. and Miranda, J.M.; Gomes, J.F. Silva and A.P. Vaz, Mário, eds. (2012) Fabrication of mili-scale channels for hemodynamic studies. In: Proceedings of the 15th International Conference on Experimental Mechanics. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, PRT, pp. 937-938. ISBN 9789728826260
Famuyibo, A.A. and Duffy, Aidan and Strachan, Paul (2012) Developing archetypes for domestic dwellings : An Irish case study. Energy and Buildings, 50. pp. 150-157. ISSN 0378-7788
Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207
Greenshields, Christopher and Reese, Jason (2012) Rarefied hypersonic flow simulations using the Navier-Stokes equations with non-equilibrium boundary conditions. Progress in Aerospace Sciences, 52 (1). pp. 80-87. ISSN 0376-0421
Linton, Carol and Holderbaum, William and Biggs, James (2012) Rigid body trajectories in different 6D spaces. ISRN Mathematical Physics, 2012. 467520. ISSN 2090-4673
Mingotti, Giorgio; (2012) Parametric study of Earth-to-Moon transfers with hybrid propulsion system and dedicated launch. In: Astrodynamics 2011. Advances in the Astronautical Sciences, 142 . Univelt Inc, USA, pp. 809-826. ISBN 978-0-87703-577-0
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-Formed Steel Sections with Web Openings Subjected to Web Crippling under Two-Flange Loading Conditions — Part I : Tests and Finite Element Analysis. Thin-Walled Structures, 56. pp. 38-48. ISSN 0263-8231
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions — Part II : Parametric study and proposed design equations. Thin-Walled Structures, 56. pp. 79-87. ISSN 0263-8231
Yang, Liu and Thomason, James (2012) The role of residual thermal stress in interfacial strength of polymer composites by a novel single fibre technique. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Downes, Kerrie Ann and Thomason, James (2012) The absorption of automotive coolant fluids in glass fibre reinforced polyamide 6,6 at elevated temperatures. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Gentles, Fiona and Thomason, James (2012) Investigation of interfacial strength between polyethylene terephthalate fibre and maleic anhydride modified polypropylene. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Jenkins, Peter George and Thomason, James and Meier, R. (2012) Separation of mechanical and thermal degradation of thermally conditioned sized glass fibre. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Reilly, S. P. and Faull, K. and Thomason, J. L. (2012) The effect of aging on the mechanical properties of carbon fibre reinforced epoxy. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Rudeiros Fernandez, Jose Luis and Thomason, James (2012) Characterisation of the mechanical performance of natural fibres for lightweight automotive applications. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Thomason, James and Gentles, Fiona and Brennan, A. (2012) Natural fibre cross sectional area effects on the determination of fibre mechanical properties. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Thomason, James and Ure, James Michael and Yang, Liu and Kao, Chih-Chuan (2012) Mechanical study on surface treated glass fibres after thermal conditioning. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Yang, Liu and Thomason, James (2012) The role of residual thermal stress in composite interfacial strength by a novel single fibre technique. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.
Liu, Haihu and Zhang, Yonghao and Valocchi, Albert J. (2012) Modeling and simulation of thermocapillary flows using lattice Boltzmann method. Journal of Computational Physics, 231 (12). 4433–4453. ISSN 0021-9991
Johnson, Les and McInnes, Colin and Macdonald, Malcolm and Percy, T. (2012) Mars sample return using solar sail propulsion. In: Concepts and Approaches for Mars Exploration, 2012-06-12 - 2012-06-14, Texas.
Keegan, Mark Hugh and Nash, David and Stack, Margaret (2012) Modelling rain drop impact on offshore wind turbine blades. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15.
Chacón-Nava, José G. and Almeraya-Calderón, F. and Orozco-Carmona, V.M. and Martínez-Villafañe, Alberto and Stack, Margaret; (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE, PER.
Wu, Lei and Meng, Jian-Ping and Zhang, Yonghao (2012) Kinetic modelling of the quantum gases in the normal phase. Proceedings of the Royal Society Part A - Mathematical, Physical and Engineering Sciences, 468 (2142). pp. 1799-1823. ISSN 1471-2962
Dongari, Nishanth and Barber, Robert W. and Emerson, David and Zhang, Yonghao and Reese, Jason (2012) Velocity inversion in cylindrical Couette gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08.
Lockerby, Duncan A. and Duque-Daza, Carlos A. and Borg, Matthew Karl and Reese, Jason (2012) Efficient time-step coupling for hybrid continuum/molecular modelling of unsteady micro-scale gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08.
Meng, Jian-Ping and Dongari, Nishanth and Reese, Jason and Zhang, Yonghao (2012) A kinetic switching criterion of hybrid modelling of multiscale gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08.
White, Craig and Borg, Matthew Karl and Scanlon, Thomas and Reese, Jason (2012) Accounting for rotational non-equilibrium effects in subsonic DSMC boundary conditions. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08.
Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2012) A potential solution to GMAW gas flow optimisation. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.
McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Osman, M.M. (2012) A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.
McPherson, Norman and Galloway, Alexander and Wood, James and Cater, Stephen R. (2012) A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.
Reiss, Philip and Hager, P and Bewick (Lucking), Charlotte and Macdonald, Malcolm (2012) New methodologies for the thermal modelling of CubeSats. In: 4S Symposium 2012, Small Satellites Systems and Services, 2012-06-04 - 2012-06-08.
Boyle, James (2012) Stress relaxation and elastic follow-up using a stress range-dependent constitutive model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1472-1483. ISSN 0954-4062
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Artificial neural network prediction of weld geometry performed using GMAW with alternating shielding gases. Welding Journal, 91 (6). 174S-181S. ISSN 0043-2296
Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2012) Evaluation of gas metal arc welding with alterating shielding gases for use on AA6082T6. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226. pp. 992-1000. ISSN 2041-2975
Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, Fernando T. and Alves, Manuel A. and Oliveira, Monica (2012) Nanogel formation of polymer solutions flowing through porous media. Soft Matter, 8 (24). pp. 6445-6453. ISSN 1744-6848
Colombo, Camilla and McInnes, Colin (2012) Orbit design for future SpaceChip swarm missions in a planetary atmosphere. Acta Astronautica, 75. pp. 25-41. ISSN 0094-5765
Dongari, Nishanth and Agrawal, Anupam (2012) Modeling of Navier-Stokes equations for high Knudsen number gas flows. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4352-4358. ISSN 0017-9310
Linton, Carol and Holderbaum, William and Biggs, James (2012) Closed form solution for p-curves in SO(4). In: American Control Conference, 2012-06-27 - 2012-06-29.
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Solar radiation pressure augmented deorbiting from high altitude sun-synchronous orbits. In: 4S Symposium 2012, Small Satellites Systems and Services, 2012-06-04 - 2012-06-08.
Minisci, Edmondo and Campobasso, Michele Sergio and Vasile, Massimiliano (2012) Robust aerodynamic design of variable speed wind turbine rotors. In: ASME Turbo Expo 2012 Technical Conference, 2012-06-11 - 2012-06-15.
Rahman, Mahbubur and Lim, James B.P. and Xu, Yixiang and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David (2012) Effect of column base strength on steel portal frames in fire. Proceedings of the ICE - Structures and Buildings, 166 (4). pp. 197-216. ISSN 0965-0911
Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Haversian canal structures can be associated with size effects in cortical bone. In: Euromech 534 Colloquium: Advanced experimental approaches and inverse problems in tissue biomechanics, 2012-05-29 - 2012-05-31.
Hamilton, Niall Robert and Wood, James (2012) Observations on the modelling and assessment of dissimilar material brazed joints. In: NAFEMS UK Conference, 2012-05-30 - 2012-05-31.
Oliveira, Monica and Haward, S.J. and McKinley, G.H. and Alves, M.A. (2012) Extensional flow of viscoelastic fluids in an Optimised Cross-slot Extensional Rheometer (OSCER). In: 25th Scottish Fluid Mechanics Meeting, 2012-05-30 - 2012-05-30.
Ellul, B and Camilleri, Duncan and Betts, J (2012) Progressive failure analysis applied to e-glass fibre reinforced polymers. In: XVII International Conference on Mechanics of Composite Materials, 2012-05-28 - 2012-06-01.
Sousa, P.C. and Afonso, A.M. and Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2012) Microfluidics with complex fluids. In: 4th National Conference on Fluid Mechanics, 2012-05-28 - 2012-05-29.
Azvedo, B.M.C. and Oliveira, Monica and Pinho, F.T. (2012) Estudo numerico da hemodinâmica em modelos simplificados de aneurismas saculares cerebrais. In: VIII Congresso Português de Neuradiologia, 2012-05-25 - 2012-05-26.
Masi, Luca and Vasile, Massimiliano (2012) A multidirectional modified Physarum solver for discrete decision making. In: Bioinspired Optimization Methods and their Applications, BIOMA 2012, 2012-05-24 - 2012-05-25.
Zuiani, Federico and Vasile, Massimiliano (2012) Multi-agent collaborative search with Tchebycheff decomposition and monotonic basin hopping steps. In: Bioinspired Optimization Methods and their Applications, BIOMA 2012, 2012-05-24 - 2012-05-25.
Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and McInnes, Colin (2012) Near-Earth asteroid resource accessibility and future capture mission opportunities. In: Global Space Exploration Conference, 2012-05-22 - 2012-05-24.
Boyle, James (2012) A re-assessment of elastic follow-up in high temperature piping. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23.
Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.
Chen, Weihang and Chen, Haofeng (2012) Cyclic J integral using linear matching method. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.
Dempster, William and Elmayyah, Wael (2012) Two-phase discharge flow prediction in safety valves. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.
Li, Hongjun and Wood, James and McCormack, Ross (2012) Shakedown behaviour of a 90 degree single mitred pipe bends under cyclic in-plane closing moments. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23.
Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2012) Linear matching method for ratchet limit prediction in comparison to Rolls Royce's Hierarchical Finite Element Framework. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.
Muscat, Martin and Camilleri, Duncan (2012) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.
Ure, James Michael and Chen, Haofeng and Tipping, David (2012) Development and implementation of the Abaqus subroutines and plug-in for routine structural integrity assessment using the linear matching method. In: SIMULIA Community Conference 2012, (Formerly the ABAQUS Users Conference), 2012-05-14 - 2012-05-17.
Clarke, Joseph Andrew (2012) The implementation of diffuse radiation shading computation in ESP-r. In: eSim 2012 Building Simulation Conference, 2012-05-01 - 2012-05-04.
Clarke, Joseph Andrew and Ghauri, Sabeeta and Johnstone, Cameron and Samuel, Aizaz (2012) Domestic upgrade policy development. In: eSim 2012 Building Simulation Conference, 2012-05-01 - 2012-05-04.
Tian, Qing and Wu, Lei and Zhang, Yonghao and Zhang, Jie-Fang (2012) Vortex solutions in defocusing media with spatially inhomogeneous nonlinearity. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 85 (5). 056603. ISSN 2470-0053
Murphy, Gavin Bruce and Counsell, John (2012) Inverse Dynamics based Energy Assessment and Simulation : IDEAS. PhD thesis, Mechanical And Aerospace Engineering.
Sinn, Thomas and Vasile, Massimiliano and Tibert, Gunnar; (2012) Design and development of a deployable self-inflating adaptive membrane. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781600869372
Vasile, Massimiliano and Minisci, Edmondo and Wijnands, Quirien (2012) Approximated computation of belief functions for robust design optimization. In: 14th AIAA Non-Deterministic Approaches Conference, 2012-04-23 - 2012-04-26.
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2012) Buckling analysis of VAT plate using energy method. In: 53rd Structural Dynamics and Materials Conference, 2012-04-23 - 2012-04-26.
Liu, Haihu and Valocchi, Albert J. and Kang, Qinjun (2012) Three-dimensional lattice Boltzmann model for immiscible two-phase flow simulations. Physical Review E, 85 (4). 046309. ISSN 2470-0053
Johnston, James and Counsell, John and Banks, Gerry and Stewart, Matt John (2012) Beyond Power over Ethernet : the development of Digital Energy Networks for buildings. In: CIBSE Technical Symposium 2012 - Buildings Systems and Services for the 21st Century, 2012-04-18 - 2012-04-19.
Murphy, Gavin Bruce and Baster, Michael Eric and Allison, John and Counsell, Sean (2012) Simplified modelling of air source heat pumps producing detailed results. In: CIBSE Technical Symposium 2012 - Buildings Systems and Services for the 21st Century, 2012-04-18 - 2012-04-19.
Dadzie, Kokou and Reese, Jason (2012) Analysis of the thermomechanical inconsistency of some extended hydrodynamic models at high Knudsen number. Physical Review E, 85 (4). 041202. ISSN 2470-0053
Gibbings, Alison and Vasile, Massimiliano (2012) Smart Cloud : A novel method for the deflection and mitigation of asteroids. In: Astrobiology Science Conference 2012, 2012-04-16 - 2012-04-20.
Gibbings, Alison and Vasile, Massimiliano and Watson, Ian A. and Hopkins, John-Mark and Burns, David (2012) Laser ablation for the effective deflection, exploration and exploitation of asteroids. In: Astrobiology Science Conference 2012, 2012-04-16 - 2012-04-20.
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Mikkelsen, Torben (2012) Measurement and simulation of the flow field around a triangular lattice meteorological mast. In: European Wind Energy Conference, EWEC 2012, 2012-04-16 - 2012-04-19.
Tuohy, Paul Gerard and Murphy, Gavin Bruce (2012) Why advanced buildings don't work? In: 7th Windsor Conference: The changing context of comfort in an unpredictable world, 2012-04-12 - 2012-04-15.
Wu, Lei and Zhang, Yonghao (2012) Applicability of the Boltzmann equation for a two-dimensional Fermi gas. Physical Review A, 85 (4). 045601. ISSN 1050-2947
Thomason, James and Yang, Liu (2012) Temperature dependence of the interfacial shear strength in glass-fiber polypropylene composite investigated by a novel single fiber technique. In: ANTEC 2012 Conference, 2012-04-02 - 2012-04-04.
Aranjo, Brendan Savio and Hughes, Ben Richard and Chaudry, Hassam Nasarullah (2012) Performance investigation of ground cooling for the airbus A380 in the United Arab Emirates. Applied Thermal Engineering, 36 (1). pp. 87-95. ISSN 1359-4311
Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) The feasibility of using an L1 positioned dust cloud as a method of space-based geoengineering. Advances in Space Research, 49 (7). pp. 1212-1228. ISSN 0273-1177
Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161
Biggs, James and Horri, Nadjim (2012) Optimal geometric motion planning for a spin-stabilized spacecraft. Systems and Control Letters, 61 (4). pp. 609-616. ISSN 0167-6911
Boyle, James (2012) The creep behavior of simple structures with a stress range-dependent constitutive model. Archive of Applied Mechanics, 82 (4). pp. 495-514. ISSN 0939-1533
Camilleri, Duncan (2012) Thermo-mechanical behaviour of DBC substrate assemblies subject to soldering fabrication processes. Soldering and Surface Mount Technology, 24 (2). pp. 100-111. ISSN 0954-0911
Mollicone, Pierluigi and Gray, Thomas and Camilleri, Duncan (2012) Experimental investigation and finite element analysis of welding induced residual stresses. Journal of Strain Analysis for Engineering Design, 47 (3). pp. 140-152. ISSN 0309-3247
Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) Assessment on the feasibility of future shepherding of asteroid resources. Acta Astronautica, 73. pp. 49-66. ISSN 0094-5765
Afonso, A.M. and Oliveira, Monica and Oliveira, P.J. and Alves, M.A. and Pinho, F.T.; Petrova, Radostina, ed. (2012) The finite-volume method in computational rheology. In: Finite-Volume Methods - Powerful Means of Engineering Design. In-Tech Open Publishers, Ch 7, pp 141-170. ISBN 978-953-51-0445-2
Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2012) High Deborah-number flows around a confined cylinder. In: 17th International Workshop on Numerical Methods for Non-Newtonian Flows, IWNMNNF 2012, 2012-03-25 - 2012-03-28.
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Mission analysis and systems design of a near-term and far-term pole-sitter mission. In: 1st IAA Conference on Dynamics and Control of Space Systems, 2012-03-19 - 2012-03-21.
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James; (2012) Mission analysis and systems design of a near-term and far-term pole-sitter mission. In: Advances in the Astronautical Sciences. Univelt Inc, PRT, pp. 1151-1170. ISBN 978-0-87703-587-9
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco; (2012) Hybrid propulsion transfers to the Moon. In: Advances in the Astronautical Sciences. Advances in Astronautical Sciences, 145 . Univelt Inc, PRT, pp. 205-214. ISBN 978-0-87703-587-9
XU, Ming and McInnes, Colin (2012) Constellation design for responsive revisiting. In: 1st IAA Conference on Dynamics and Control of Space Systems, 2012-03-19 - 2012-03-21.
Gibbings, Alison (2012) Experimental analysis of laser ablation for asteroid deflection and exploitation. In: SET for Britain 2012, 2012-03-12 - 2012-03-12.
Heiligers, Jeannette and Ceriotti, Matteo (2012) Pole-sitter spacecraft for Earth observation. In: SET for Britain 2012, 2012-03-12 - 2012-03-12.
Zuiani, Federico and Vasile, Massimiliano and Avanzini, Giulio and Palmas, Alessandro (2012) Direct transcription of low-thrust trajectories with finite trajectory elements. Acta Astronautica, 72. pp. 108-120. ISSN 0094-5765
Borggrafe, Andreas and Ohndorf, Andreas and Dachwald, Bernd and Sebolt, Wolfgang; (2012) Analysis of interplanetary solar sail trajectories with attitude dynamics. In: Advances in the Aeronautical Sciences. Univelt Inc, PRT, pp. 1553-1569.
Chacón-Nava, José G. and Almeraya-Calderón, F. and Martínez-Villafañe, Alberto and Stack, Margaret; Adamiak, Marcin, ed. (2012) Low impact velocity wastage in FBCs : experimental results and comparison between abrasion and erosion theories. In: Abrasion resistance of materials. In-Tech Open Publishers, Croatia. ISBN 9799533070369
Docherty, Stephanie and Macdonald, Malcolm (2012) Analytical sun synchronous low-thrust manoeuvres. Journal of Guidance, Control and Dynamics, 35 (2). pp. 681-686. ISSN 1533-3884
Gong, Shengping and Baoyin, Hexi and Li, Junfeng and Simo, Jules (2012) A new solar sail orbit. Science China - Technological Sciences, 55 (3). pp. 848-855. ISSN 1674-7321
Hong, Jun and Johnstone, Cameron and Torriti, Jacopo and Leach, Matthew (2012) Discrete demand side control performance under dynamic building simulation : a heat pump application. Renewable Energy, 39 (1). pp. 85-95. ISSN 0960-1481
Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2012) NORSEWInD Data Report and Correction Data for Berlengas : NORSEWInD Report UoSNW026. University of Strathclyde, Glasgow.
Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) Synergistic approach of asteroid exploitation and planetary protection. Advances in Space Research, 49 (4). pp. 667-687. ISSN 0273-1177
Ceccaroni, Marta and Biggs, James and Biscani, Francesco (2012) Analytical perturbative theories of motion in highly inhomogeneous gravitational fields : Ariadna AO/1-6790/11/NL/CBI. European Space Agency.
Dadzie, Kokou and Reese, Jason (2012) Spatial stochasticity and non-continuum effects in gas flows. Physics Letters A, 376 (8-9). pp. 967-972. ISSN 0375-9601
Anderson, Pamela and Macdonald, Malcolm; (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: Spaceflight Mechanics 2012. Advances in Astronautical Sciences, 143 . Univelt Inc, pp. 2305-2324. ISBN 978-0-87703-581-7
Ceccaroni, Marta and Biggs, James (2012) Low thrust propulsion in a coplanar circular restricted four body problem. Celestial Mechanics and Dynamical Astronomy, 112 (2). pp. 191-219. ISSN 0923-2958
Heiligers, Jeannette and McInnes, Colin and Biggs, James and Ceriotti, Matteo (2012) Displaced geostationary orbits using hybrid low-thrust propulsion. Acta Astronautica, 71. pp. 51-67. ISSN 0094-5765
Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2012) On shakedown, ratchet and limit analysis of defective pipeline. Journal of Pressure Vessel Technology, 134 (1). 011202. ISSN 0094-9930
Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) On the ratchet analysis of a cracked welded pipe. Journal of Pressure Vessel Technology, 134 (1). 011203. ISSN 0094-9930
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco; (2012) Attainable sets in space mission design : A method to define low-thrust, invariant manifold trajectories. In: Spaceflight Mechanics 2012. Advances in the Astronautical Sciences, 143 . Univelt Inc, USA, pp. 541-556. ISBN 978-0-87703-581-7
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco (2012) Efficient invariant-manifold, low-thrust planar trajectories to the Moon. Communications in Nonlinear Science and Numerical Simulation, 17 (2). pp. 817-831. ISSN 1007-5704
Rijal, Hom B. and Tuohy, Paul Gerard and Humphreys, Michael A. and Nicol, J. Fergus and Samuel, Aizaz (2012) Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings. Architectural Science Review, 55 (1). pp. 35-48. ISSN 0003-8628
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) High performance microfluidic rectifiers for viscoelastic fluid flow. RSC Advances, 2 (3). pp. 920-929. ISSN 2046-2069
Wu, Zhangming and Choudhury, Khujesta and Griffiths, Helen R. and Xu, Jinwu and Ma, Xianghong (2012) A novel silicon membrane-based biosensing platform using distributive sensing strategy and artificial neural networks for feature analysis. Biomedical Microdevices, 14 (1). pp. 83-93. ISSN 1387-2176
Zanzottera, Anna and Mingotti, Giorgio and Castelli, Roberto and Dellnitz, Michael (2012) Intersecting invariant manifolds in spatial restricted three-body problems : Design and optimization of Earth-to-halo transfers in the Sun-Earth-Moon scenario. Communications in Nonlinear Science and Numerical Simulation, 17 (2). pp. 832-843. ISSN 1007-5704
Galindo-Rosales, F. J. and Campo-Deaño, L. and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. and Oliveira, M. S. N. and Alves, M.A. (2012) Microfluidic systems for the analysis of the viscoelastic fluid flow phenomena in porous media. Microfluidics and Nanofluidics, 12 (1-4). pp. 485-498. ISSN 1613-4982
Anderson, Pamela and Macdonald, Malcolm (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02.
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Design of optimal transfers between North and South Pole-sitter orbits. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02.
Simo, Jules and McInnes, Colin (2012) Feedback stabilization of displaced periodic orbits : Application to binary asteroid. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02.
Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. Wear, 274-275. pp. 401-413. ISSN 0043-1648
Biggs, James and Bennet, Derek James and Dadzie, Kokou (2012) Time-delayed autosynchronous swarm control. Physical Review E, 85 (1). 016105. ISSN 2470-0053
An, Hongyan and Zhang, Chuhua and Meng, Jian-Ping and Zhang, Yonghao (2012) Analytical solution of axi-symmetrical lattice Boltzmann model for cylindrical Couette flows. Physica A: Statistical Mechanics and its Applications, 391 (1-2). pp. 8-14. ISSN 0378-4371
Nicholls, William and Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2012) Water transport through (7,7) carbon nanotubes of different lengths using molecular dynamics. Microfluidics and Nanofluidics, 12 (1-4). pp. 257-264. ISSN 1613-4982
Quail, Francis J. and Scanlon, T.J. and Baumgartner, A. (2012) Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques. European Journal of Mechanics - B/Fluids, 31. pp. 181-187. ISSN 0997-7546
Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Structures, 50 (1). pp. 76-86. ISSN 0263-8231
Wu, Lei and Zhang, Yonghao (2012) Numerical investigation of the radial quadrupole and scissors modes in trapped gases. EPL: A Letters Journal Exploring the Frontiers of Physics, 97. pp. 1-6. 16003. ISSN 0295-5075
Day, Philip and Manz, Andreas and Zhang, Yonghao, eds. (2012) Microdroplet technology : Principles and emerging applications. Principles and Emerging Applications in Biology and Chemistry: Integrated Analysis Systems, IX . Springer New York, New York. ISBN 978-1-4614-3264-7
Antoine, C. and Dumazer, G. and Nowakowski, B. and Lemarchand, A. (2012) Nonlinear hydrodynamic corrections to supersonic F-KPP wave fronts. Physica D: Nonlinear Phenomena, 241 (5). pp. 461-471. ISSN 0167-2789
Counsell, John and Brindley, Joseph and Murphy, Gavin Bruce and Khalid, Yousaf Ali (2012) Nonlinear controller design methods for modern building heating and ventilation systems using inverse dynamics. Intelligent Buildings International. ISSN 1750-8975 (Unpublished)
Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2012) LASER BEES : A concept for asteroid deflection and hazard mitigation. The Planetary Society, Pasadena, USA.
Haward, S.J. and Ober, Thomas J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Extensional rheology and elastic instabilities of a wormlike micellar solution in a microfluidic cross-slot device. Soft Matter, 8 (2). pp. 536-555. ISSN 1744-6848
Stickland, Matthew (2012) International Standard IEC61400-12-1 : Wind Turbines-Part 12-1: Power performance measurements of electricity producing wind turbines: Annex G. International Electrical Commission, IEC.
Zhang, Yonghao and Liu, Haihu; Day, Philip and Manz, Andreas and Zhang, Yonghao, eds. (2012) Physics of multiphase microflows and microdroplets. In: Microdroplet Technology. Principles and Emerging Applications in Biology and Chemistry: Integrated Analytical Systems, IX . Springer New York, pp. 1-21. ISBN 9781461432647
Zuiani, Federico and Vasile, Massimiliano (2012) Preliminary design of debris removal missions by means of simplified models for low-thrust, many-revolution transfers. International Journal of Aerospace Engineering, 2012. p. 836250.
2011
McPherson, Norman and Galloway, Alexander and Gillies, Andrew and Campbell, Stuart and Scanlon, Thomas and Moore, A.J. and Wu, T (2011) MIG gas shielding : Economic savings without detriment to quality. In: Annual International Conference on Materials Science, Metal & Manufacturing, M3 2011, 2011-12-12 - 2011-12-13.
Macdonald, Malcolm and McInnes, Colin (2011) Solar sail science mission applications and advancement : solar sailing: concepts, technology, missions. Advances in Space Research, 48 (11). pp. 1702-1716. ISSN 0273-1177
Boyle, James (2011) The behavior of structures based on the characteristic strain model of creep. International Journal of Pressure Vessels and Piping, 88 (11-12). pp. 473-481. ISSN 0308-0161
Ceriotti, Matteo and McInnes, Colin (2011) Systems design of a hybrid sail pole-sitter. Advances in Space Research, 48 (11). pp. 1754-1762. ISSN 0273-1177
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2011) Displaced geostationary orbit design using hybrid sail propulsion. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1852-1866. ISSN 1533-3884
Stack, Margaret and Huang, W. and Wang, G. and Hodge, C. (2011) Some views on the construction of bio-tribo-corrosion maps for Ti in Hanks solution : Particle concentration and applied loads effects. Tribology International, 44 (12). pp. 1827-1837. ISSN 0301-679X
Suzuki, Masayuki and Uchiyama, Kenji and Bennet, Derek James and McInnes, Colin (2011) Three-dimensional formation flight for UAV using bifurcating velocity field. Journal of the Japan Society of Aeronautical and Space Sciences, 59 (693). pp. 259-265.
Stack, M.M. and Abdelrahman, S.M. (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. Wear, 273 (1). pp. 38-42. ISSN 0043-1648
Gauci, Thomas and Muscat, Martin and Sant, Tonio and Mollicone, Pierluigi and Camilleri, Duncan (2011) Ultimate state design of a deep water offshore wind turbine support structure for the central Mediterranean region. In: European Offshore Wind Conference 2011, 2011-11-29 - 2011-12-01.
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Comparison of Zephir and Windcube measurements in the same complex flowfield. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01.
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Computational and Experimental Study on the effect of flow field distortion on the accuracy of the measurements made by anemometers on the Fino3 Meteorological mast. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01.
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Feasibility Study of using a LiDAR in the complex flowfield of an offshore platform, to measure wind shear profile. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01.
Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Mikkelsen, Torben (2011) Feasibility study for estimating the offshore shear layer from on shore measurements. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01.
Tuohy, Paul Gerard and Murphy, Gavin Bruce and Cowie, Alison and Devici, Gokay and Theoboldt, Ingo (2011) POE + Monitoring including the 1st Scottish Passive House. In: UK Passivhaus Conference, 2011-11-24 - 2011-11-25.
Hand, Jon and Kim, Jae Min and Woo, Kyunghun; (2011) Gaining confidence in models of experiments in existing buildings. In: Proceedings of Building Simulation 2011. International Building Performance Simulation Association, AUS.
Hand, Jon and Kim, Jae Min and Woo, Kyunghun (2011) Gaining confidence in models of experiments in existing buildings. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16, Sydney. (In Press)
Murphy, Gavin Bruce and Khalid, Yousaf Ali and Counsell, John (2011) A simplified dynamic systems approach for the energy rating of dwellings. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16.
Murphy, Gavin Bruce and Samuel, Aizaz Aamir and Counsell, John (2011) Enhancement of the UK Standard Assessment Procedure (SAP) solar water heating prediction algorithm using parametric dynamical thermal simulations. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16.
Falcão, D.S. and Oliveira, V.B. and Oliveira, Monica and Rangel, C.M. and Pinto, A.M.F.R. (2011) Modelling and simulation of micro direct methanol fuel cells. In: Advances in Hydrogen Energy Technologies: Opportunities and Challenges in a Hydrogen Economy, 4th International Seminar, 2011-11-10 - 2011-11-11.
Sasagawa, K and Coupaud, S. and Gislason, Magnus Kjartan and Tanner, E. and Tanabe, Y (2011) Modelling of a finite element mesh for the tibia of a spinal cord injured patient. In: Simpleware Users Meeting, 2011-11-09 - 2011-11-09.
Wood, James and Morris, Tim and Prinja, Nawal (2011) The development of a competence framework for engineering analysis and simulation. In: 21st International Conference on Structural Mechanics in Reactor Technology, 2011-11-06 - 2011-11-11.
Bennet, Derek James and McInnes, Colin and Suzuki, Masayuki and Uchiyama, Kenji (2011) Autonomous three-dimensional formation flight for a swarm of unmanned aerial vehicles. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1899-1908. ISSN 1533-3884
Brown, Richard and Scheurich, Frank (2011) Effect of dynamic stall on the aerodynamics of vertical-axis wind turbines. AIAA Journal, 49 (11). pp. 2511-2521. ISSN 0001-1452
Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Flow of low viscosity Boger fluids through a microfluidic hyperbolic contraction. Journal of Non-Newtonian Fluid Mechanics, 166 (21-22). pp. 1286-1296. ISSN 0377-0257
Colombo, Camilla and McInnes, Colin (2011) Orbital dynamics of "smart dust" devices with solar radiation pressure and drag. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1613-1631. ISSN 1533-3884
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco (2011) Optimal low-thrust invariant manifold trajectories via attainable sets. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1644-4655. ISSN 1533-3884
Minisci, E and Vasile, M and Liqiang, H (2011) Robust multi-fidelity design of a micro re-entry unmanned space vehicle. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (11). pp. 1195-1209. ISSN 0954-4100
Oliveira, Monica and Alves, M.A. and Pinho, F.T.; Grigoriev, Roman, ed. (2011) Microfluidic flows in viscoelastic fluids. In: Mixing in Laminar Fluid Flows. Reviews of Nonlinear Dynamics and Complexity . Wiley-Blackwell, Berlin, Ch 6, 131-165. ISBN 978-3-527-41011-8
Ozdemir, P and Zhang, Yonghao; Rapley, Ralph and Harbron, Stuart, eds. (2011) DNA analysis in droplet-based microfluidic devices. In: Molecular Analysis and Genome Discovery. Wiley-Blackwell, 56-75, Chapter 4. ISBN 978-0-470-75877-9
Schutze, O. and Lara, A. and Coello Coello, Carlos A. and Vasile, Massimiliano (2011) On the detection of nearly optimal solutions in the context of single-objective space mission design problems. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (11). pp. 1229-1242. ISSN 0954-4100
Vasile, M. and Zuiani, F. (2011) Multi-agent collaborative search : an agent-based memetic multi-objective optimization algorithm applied to space trajectory design. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (11). pp. 1211-1227. ISSN 0954-4100
Stack, Margaret and Jana, Buddhadev and Abdelrahman, Shehab; (2011) Models and mechanisms of erosion-corrosion in metals. In: Tribocorrosion of Passive Metals and Coatings. Tribocorrosion of Passive Metals and Coatings . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9781845699666
Yaginuma, T. and Rodrigues, R. and Pereira, P.J. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Yamaguchi, T. (2011) Flow of red blood cells through a microfluidic extensional device : an image analysis assessment. In: VIPIMAGE-III ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, 2011-10-12 - 2011-10-14.
Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2011) Dynamics of high-Deborah -number flows around a confined cylinder. In: 83rd Annual Meeting of the Society of Rheology, 2011-10-09 - 2011-10-13.
Hamilton, Andrew and Quail, Francis (2011) Detailed state of the art review for the different on-line/in-line oil analysis techniques in context of wind turbine gearboxes. Journal of Tribology, 133 (4). 044001. ISSN 0742-4787
Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupling continuum hydrodynamics and molecular dynamics for one-dimensional scale-separated channel flows. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07.
Lockerby, Duncan A. and Duque-Daza, Carlos A. and Borg, Matthew Karl and Reese, Jason (2011) Exploiting timescale separation in micro and nano flows. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07.
Reese, Jason and Borg, Matthew Karl and Lockerby, Duncan A. (2011) Identifying non-continuum in gas flows for hybrid particle/fluid solvers. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07.
Bewick, Russell and Lucking, Charlotte and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Geo-engineering using dust grains in heliotropic elliptical orbits. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Use of orbiting reflectors to decrease the technological challenges of surviving the lunar night. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Ceccaroni, Marta and Biggs, James (2011) Nonlinearly stable equilibria in the Sun-Jupiter-Trojan-Spacecraft four body problem. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Ceriotti, Matteo and McInnes, Colin R. and Diedrich, Benjamin L. (2011) The pole-sitter mission concept : an overview of recent developments and possible future applications. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2011) Orbital dynamics of high area-to-mass ratio spacecraft under the influence of J2 and solar radiation pressure. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Gibbings, Alison and Komninou, Eirini and Vasile, Massimiliano (2011) Investigation and modelling of large scale cratering events : Lessons learnt from experimental analysis. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Gibbings, Alison and Vasile, Massimiliano (2011) A smart cloud approach to asteroid deflection. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2011) Design of optimal Earth pole-sitter transfers using low thrust propulsion. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Komninou, Eirini and Vasile, Massimiliano and Minisci, Edmondo (2011) Optimal power harness routing for small-scale satellites. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive satellite deorbiting strategy for MEO using solar radiation pressure and the J2 effect. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Maclean, Craig David and Pagnozzi, Daniele and Biggs, James (2011) Computationally light attitude controls for resource limited nano-spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Owens, Steven Robert and Macdonald, Malcolm (2011) A novel approach to hybrid propulsion transfers. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Punzo, Giuliano (2011) Fractal patterns in fractionated spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm (2011) A fractally fractionated spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Sanchez Cuartielles, J.P. and McInnes, C.R. (2011) On the ballistic capture of asteroids for resource utilisation. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Sinn, Thomas and Vasile, Massimiliano (2011) Deployment simulation of very large inflatable tensegrity reflectors. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Van Der Weg, Willem Johan and Vasile, Massimiliano (2011) Contingency and recovery options for the European Student Moon Orbiter. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Vetrisano, Massimo and Vasile, Massimiliano (2011) Navigation and contingency analysis of the European Student Moon Orbiter. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Stack, M. M. and Mathew, M. T. and Hodge, C. (2011) Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism. Electrochimica Acta, 56 (24). pp. 8249-8259. ISSN 0013-4686
Avanzini, Giulio and Minisci, Edmondo (2011) Evolutionary design of a full-envelope full-authority flight control system for an unstable high-performance aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (10). pp. 1065-1080. ISSN 0954-4100
Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2011) Techno-economic evaluation on the effects of alternating shielding gases for advanced joining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (10). pp. 1863-1872. ISSN 2041-2975
Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207
Fabre, Sylvie and Scanlon, Thomas and Stickland, Matthew and Oldroyd, Andrew (2011) An open source CFD study of air flow over complex terrain. Wind Energy. ISSN 1095-4244 (Unpublished)
Hamilton, Niall Robert and Olsson Robbie, Mikael Brian and Wood, James and Galloway, Alexander and Katramados, Ioannis and Milnes, Joe (2011) The challenges in predicting the fatigue life of dissimilar brazed joints and initial finite element results for a tungsten to EUROFER97 steel brazed joint. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796
Li, Maodeng and Jing, Wuxing and Macdonald, Malcolm and McInnes, Colin (2011) Adaptive backstepping control for optimal descent with embedded autonomy. Aerospace Science and Technology, 15 (7). pp. 1396-1411. ISSN 1270-9638
Olsson Robbie, Mikael Brian and Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Milnes, Joe and Katramados, Ioannis (2011) Observations on the post-mortem investigation of electron beam welds and other micro-structural features of JET Hypervapotrons. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796
Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2011) Modelling the dynamics and vibration of structures made of composites : A review. Central European Journal of Engineering. ISSN 1896-1541 (Unpublished)
Vasile, Massimiliano (2011) Special issue on evolutionary computation in aerospace sciences. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (10). pp. 1063-1064. ISSN 0954-4100
Vasile, Massimiliano and Minisci, Edmondo and Zuiani, Federico and Komninou, Eirini and Wijnands, Quirien (2011) Fast evidence-based space system engineering. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.
Yang, Liu and Thomason, James and Zhu, W.Z. (2011) The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene. Composites Part A: Applied Science and Manufacturing, 42 (10). pp. 1293-1300. ISSN 1359-835X
Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857092908
Thomason, James and Gentles, Fiona and Carruthers, Jamie (2011) The challenges of natural fibres as an engineering composite reinforcement. In: 19th Bio-Environmental Polymer Society (BEPS) Annual Meeting, 2011-09-28 - 2011-09-30.
White, Craig and Scanlon, Thomas and Reese, Jason (2011) Investigation of microchannels with bends using DSMC. In: DSMC11, 2011-09-26 - 2011-09-28.
Ahmad, Abdul Ossman and Maddock, Christie and Scanlon, Thomas and Brown, Richard (2011) Prediction of the aerodynamic performance of re-usable single stage to orbit vehicles. In: Space Access 2011, 2011-09-21 - 2011-09-23.
Rumi, Emal and Jack, James W and Henry, David M and Woodhouse, Iain and Nichol, Caroline and Macdonald, Malcolm; (2011) The design of a Space-borne multispectral canopy LiDAR to estimate global carbon stock and gross primary productivity. In: Sensors, Systems & Next Generation Satellites. Sensors Systems & Next Generation Satellites, 8176 . SPIE--The International Society for Optical Engineering., CZE, Article 8176-61. ISBN 978-0-81948-803-9
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2011) Laminar flow in three-dimensional square-square expansions. Journal of Non-Newtonian Fluid Mechanics, 166 (17-18). pp. 1033-1048. ISSN 0377-0257
Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard; (2011) The potential impact of policy and legislation on the energy demands of UK buildings and implications for the electrical network. In: The Future of Electricity Demand. Supergen Flexnet Book, Part IV P . Cambridge University Press, Cambridge, UK. ISBN 978-1-107-00850-2
Hong, Jun and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard; (2011) Technology demand-side management and control in buildings. In: The Future of Electricity Demand. Supergen Flexnet Book, Part II, . Cambridge University Press, Cambridge, UK. ISBN 978-1-107-00850-2
Cavallero, Claudio and Chiarelli, Cosimo and Mareschi, Vincenzo and Davite, Alessio and Gallizio, Federico and Minisci, Edmondo and Sudars, Martins (2011) Multi-disciplinary shape optimization of an entry capsule integrated with custom neural network approximation and multi-delity approach. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16.
Minisci, Edmondo and Campobasso, Michele Sergio and Dellantonio, Michele and Montecucco, Andrea and Vasile, Massimiliano (2011) Multi-disciplinary robust design of variable speed wind turbines. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16.
Vasile, Massimiliano and Minisci, Edmondo (2011) An evolutionary approach to evidence-based multi-disciplinary robust design optimisation. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16.
Zaher, Obadah Samir and Counsell, John and Brindley, Joseph; Poloni, C. and Quagliarella, D. and Périaux, J. and Gauger, N. and Giannakoglou, K., eds. (2011) Robust control of room temperature and relative humidity using advanced nonlinear inverse dynamics and evolutionary optimisation. In: Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems. CIRA, Italian Aerospace Research Centre, ITA.
Thomason, James and Yang, Liu (2011) Temperature dependence of the interfacial shear strength in glass–fibre polypropylene composites. Composites Science and Technology, 71 (13). pp. 1600-1605. ISSN 0266-3538
Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica; (2011) Gel formation of low viscous Boger fluids under high shear and extensional strain rate flow conditions. In: Rheology Trends. UNSPECIFIED, PRT. ISBN 978-972-8669-50-8
Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Numerical analysis of Microfluidic Systems Analogue of Porous Media (MSAPM) for Newtonian and low viscous Boger fluid flows. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09.
Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A.; (2011) Numerical analysis of microfluidic systems analogue of porous media (MSAPM) for Newtonian and low viscous Boger fluids. In: Rheology Trends. UNSPECIFIED. ISBN 978-972-8669-50-8
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A.; (2011) Microfluidic diodes for viscoelastic fluid flow. In: Rheology Trends. UNSPECIFIED, PRT. ISBN 978-972-8669-50-8
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Microfluidic diodes for viscoelastic fluid flow. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09.
Counsell, John and Khalid, Yousaf Ali (2011) Controllability of buildings : a multi-input multi-output stability assessment method for buildings with fast acting heating systems. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07.
Counsell, John and Strachan, Paul and Johnston, James Rm (2011) Trends in office internal gains and the impact on space heating and cooling demands. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07.
Murphy, Gavin Bruce and Counsell, John (2011) Symbolic energy estimation model with optimum start algorithm implementation. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07.
Johnstone, Cameron and Holmes, Brian and Myers, Luke and Mccombes, Tom and AbuBakr, Bahaj (2011) Equimar : development of best practices for the engineering performance appraisal of wave and tidal energy converters. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09.
Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew (2011) Tow tank tests of tethered marine turbines to determine system dynamic response. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09.
Rose, Samuel and Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Mccombes, Tom and Grant, Andrew and Lee, K.H. and Jo, C.H. (2011) Tidal turbine wakes : small scale experimental and initial computational modelling. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09.
Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm; (2011) Enhancing self-similar patterns by asymmetric artificial potential functions in partially connected swarms. In: Towards Autonomous Robotic Systems. Lecture Notes in Artificial Intelligence, 6856 (1st). Institution of Engineering and Technology, GBR. ISBN 978-3-642-23231-2
Gislason, Magnus Kjartan and Stansfield, Benedict and Nash, David (2011) Computational modelling of the wrist. In: Annual UK Hand & Wrist Network Meeting, 2011-09-01 - 2011-09-02.
Borg, Simon Paul and Kelly, Nicolas (2011) The effect of appliance energy efficiency improvements on domestic electric loads in European households. Energy and Buildings, 43 (9). pp. 2240-2250. ISSN 0378-7788
Ceriotti, Matteo and McInnes, Colin (2011) Hybrid solar sail and SEP propulsion for novel Earth observation missions. Acta Astronautica, 69 (9-10). pp. 809-821. ISSN 0094-5765
Liu, Haihu and Zhang, Yonghao (2011) Droplet formation in microfluidic cross-junctions. Physics of Fluids, 23 (8). 082101. ISSN 1089-7666
Macdonald, Malcolm and Mckay, Robert and Vasile, Massimiliano and Bosquillon de Frescheville, Francois and Biggs, James and McInnes, Colin (2011) Low-thrust enabled highly non-Keplerian orbits in support of future Mars exploration. Journal of Guidance, Control and Dynamics, 34 (5). pp. 1396-1411. ISSN 1533-3884
Pan, Wenke and Boyle, James and Ramlan, Mohd. and Dun, C. and Ismail, Mohd. and Hakoda, K. (2011) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane strain small punch test. Metallurgical Journal, LXIII. pp. 174-179. ISSN 0018-8069
Pan, Wenke and Wheel, Marcus (2011) A finite-volume method for solids with a rotational degrees of freedom based on the 6-node triangle. International Journal for Numerical Methods in Biomedical Engineering, 27 (9). pp. 1411-1426. ISSN 2040-7939
Ratola, Nuno and Amigo, José Manuel and Oliveira, Monica and Araújo, Rita and Silva, José A. and Alves, Arminda (2011) Differences between Pinus pinea and Pinus pinaster as bioindicators of polycyclic aromatic hydrocarbons. Environmenal and Experimental Botany, 72 (2). pp. 339-347. ISSN 0098-8472
Seferis, P. and Strachan, Paul and Dimoudi, A. and Androutsopoulos, A. (2011) Investigation of the performance of a ventilated wall. Energy and Buildings, 43 (9). pp. 2167-2178. ISSN 0378-7788
Taylor, Ian and Robertson, Andrew Colin (2011) Numerical simulation of the airflow–rivulet interaction associated with the rain-wind induced vibration phenomenon. Journal of Wind Engineering and Industrial Aerodynamics, 99 (9). pp. 931-944. ISSN 0167-6105
Thomason, James L. and Porteus, Glen (2011) An investigation of glass-fibre-reinforced polyamide 66 during conditioning in various automotive fluids. Polymer Composites, 32 (9). pp. 1369-1379. ISSN 0272-8397
Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupled continuum hydrodynamics and molecular dynamics method for multiscale simulation. In: 3rd Micro and Nano Flows Conference, MNF11, 2011-08-22 - 2011-08-24.
Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2011) Boger fluid flow through hyperbolic contraction microchannels. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24.
Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Oliveira, Monica and Alves, M.A. and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. (2011) Microchannels analogues for the study of viscoelastic fluid flows through porous media. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24.
Lockerby, Duncan A. and Duque-Daza, Carlos A. and Borg, Matthew K. and Reese, Jason M. (2011) Exploiting timescale separation in micro and nano flows. In: 3rd Micro and Nano Flows Conference, MNF11, 2011-08-22 - 2011-08-24.
Biggs, James; (2011) Optimal path planning for nonholonomic robotics systems via parametric optimisation. In: Lecture Notes in Computer Science. Springer, GBR. ISBN 978-3-642-23231-2
Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive high altitude deorbiting strategy. In: 25th Annual IAA/USU Conference on Small satellites, 2011-08-08 - 2011-08-11.
Hughes, Ben Richard and Ghani, Saud Abdul (2011) A numerical investigation into the feasibility of a passive-assisted natural ventilation stack device. International Journal of Sustainable Energy, 30 (4). pp. 193-211. ISSN 1478-646X
Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James (2011) On the shakedown analysis of welded pipes. International Journal of Pressure Vessels and Piping, 88 (8-9). pp. 301-310. ISSN 0308-0161
Tudor-Locke, Catrine and Craig, Cora L. and Brown, Wendy J. and Clemes, Stacy A. and De Cocker, Katrien and Giles-Corti, Billie and Hatano, Yoshiro and Inoue, Shigeru and Matsudo, Sandra M. and Mutrie, Nanette and Oppert, Jean-Michel and Rowe, David A. and Schmidt, Michael D. and Schofield, Grant M. and Spence, John C. and Teixeira, Pedro J. and Tully, Mark A. and Blair, Steven N. (2011) How many steps/day are enough? for adults. International Journal of Behavioral Nutrition and Physical Activity, 8 (79). 79. ISSN 1479-5868
Trendafilova, Irina (2011) Vibration-based structural interrogation and health monitoring based on nonlinear signal analysis. In: 7th European Nonlinear Dynamics Conference, ENOC2011, 2011-07-24 - 2011-07-29.
Trendafilova, Irina (2011) A method for vibration-based structural interrogation and health monitoring based on signal cross-correlation. Journal of Physics Conference Series, 305 (1). 012005. ISSN 1742-6588
Abid, Muhammad and Khan, Kamran Ahmed and Chatta, Javed Ahmad and Nash, David (2011) Leakage analysis of gasketed flange joints under combined internap pressure and thermal loading. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.
Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels & Piping Conference, PVP 2011, 2011-07-17 - 2011-07-21.
Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.
Scanlon, Thomas and White, Craig and Schuebler, Matthias and Brown, Richard and Reese, Jason (2011) Thermochemistry modelling in an open-source DSMC code. In: 28th International Symposium on Shock Waves, 2011-07-17 - 2011-07-22.
Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2011) Incorporation of TiC particles on AlSi 4340 low alloy steel surfaces via tungsten inert gas melting. In: 14th international Conference on Advances in Materials and Processing Technologies, 2011-07-13 - 2011-07-16.
Guechaichia, Abdelhamid and Trendafilova, Irina (2011) A simple method for enhanced vibration-based structural health monitoring. Journal of Physics Conference Series, 305 (1). 012073. ISSN 1742-6588
Thomason, James and Carruthers, John (2011) Natural fibre cross sectional area, its variabiity and effects on the determination of fibre properties. In: ECOCOMP 2011, The 4th International Conference on Sustainable Materials, Polymers and Composites, 2011-07-06 - 2011-07-07.
Ahmad, Abdul Ossman and Scanlon, Thomas and Reese, Jason (2011) Capturing shock waves using an open-source direct simulation Monte Carlo code. In: 4th European Conference for Aero-Space Sciences, EUCASS, 2011-07-04 - 2011-12-08.
Gibbings, Alison and Hopkins, John-Mark and Burns, David and Vasile, Massimiliano and Watson, Ian A. (2011) Exploring and exploiting asteroids with laser ablation. In: UK Space Conference 2011, 2011-07-04 - 2011-07-05.
Scanlon, Thomas and Brown, Richard and Reese, Jason and White, Craig and Ahmad, Abdul Ossman and Schuebler, Matthias (2011) Chemistry modelling in an open-source DSMC code. In: 4th European Conference for Aero-Space Sciences, EUCASS, 2011-07-04 - 2011-12-08.
Gislason, Magnus Kjartan and Nash, David (2011) Total wrist arthroplasty : A finite element study. In: 23rd Congress of the International Society of Biomechanics, 2011-07-03 - 2011-07-07.
Hughes, Ben Richard and Mak, Cheuk Ming (2011) A study of wind and buoyancy driven flows through commercial wind towers. Energy and Buildings, 43 (7). pp. 1784-1791. ISSN 0378-7788
Hughes, Ben Richard and Oates, Michael (2011) Performance investigation of a passive solar-assisted kiln in the United Kingdom. Solar Energy, 85 (7). pp. 1488-1498. ISSN 0038-092X
Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Effect of circular holes on the ratchet limit and crack tip plastic strain range in a centre cracked plate. Engineering Fracture Mechanics, 78 (11). pp. 2310-2324. ISSN 0013-7944
David-West, O.S. and Banks, W.M. and Pethrick, R.A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 133-148. ISSN 1464-4207
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Modeling of Knudsen layer effects in micro/nanoscale gas flows. Journal of Fluids Engineering, 133 (7). 071101. ISSN 0098-2202
Ewing, Helen and Yang, S. (2011) The effect of precursor composition and sintering additives on the formation of ß-sialon from Al, Si and Al2O3 powders. Ceramics International, 37 (5). pp. 1667-1673. ISSN 0272-8842
Mackintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2011) Dynamic characteristics and processing of fillers in polyurethane elastomers for vibration damping applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 113-122. ISSN 1464-4207
McInnes, Colin (2011) Displaced non-Keplerian orbits using impulsive thrust. Celestial Mechanics and Dynamical Astronomy, 110 (3). pp. 199-215. ISSN 0923-2958
Mccombes, Tom and Johnstone, Cameron and Grant, Andrew (2011) Unsteady wake modelling for tidal current turbines. IET Renewable Power Generation, 5 (4). pp. 299-310. ISSN 1752-1416
Minisci, Edmondo and Vasile, Massimiliano (2011) Robust design of a re-entry unmanned space vehicle by multi-fidelity evolution control. In: Genetic and Evolutionary Computation Conference, 2005-06-25 - 2005-06-29.
Walker, C. (2011) A theoretical review of the operation of vibratory stress relief with particular reference to the stabilization of large-scale fabrications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 195-204. ISSN 1464-4207
Dadzie, Kokou and Reese, Jason; Levin, D.A and Wysong, I.J and Garcia, A.L and Abarbanel, H, eds. (2011) Dissipative mass flux and sound wave propagations in monatomic gases. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, pp. 655-660. ISBN 9780735408890
Dongari, Nishanth and Dadzie, Kokou and Zhang, Yonghao and Reese, Jason; Levin, D.A. and Wysong, I.J. and Garcia, A.L. and Abarbanel, H., eds. (2011) Isothermal micro channel gas flow using a hydrodynamic model with dissipative mass flux. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, USA, pp. 718-723. ISBN 9780735408890
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason; Levin, D.A and Wysong, I.J and Garcia, A.L and Abarbanel, H, eds. (2011) Behaviour of microscale gas flows based on a power-law free path distribution function. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 1333 (1st). Springer, USA, pp. 724-729. ISBN 978-0-7354-0889-0
Zhivov, Alexander and Liesen, Richard and Fisher, Dan and Hand, Jon and Wilson, Barry; (2011) Screening of energy efficient technologies for industrial buildings' retrofit. In: ASHRAE Transactions. Ashrae Transactions, 116 . American Society for Heating, Refrigerating and Air-Conditioning Engineers, ASHRAE, USA, pp. 401-411.
Oliveira, Monica and Afonso, A.M. and Pinho, F.T. and Alves, M.A.; (2011) High Deborah number flows through 3D contractions at the microscale. In: Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo. CRC Press, USA, pp. 497-500. ISBN 978-1-4398-7139-3
Reese, Jason and Nicholls, William (2011) Perspectives on the simulation of micro gas and nano liquid flows. In: 9th ASME International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2011, 2011-06-19 - 2011-06-22.
Yaginuma, T. and Oliveira, Monica and Lima, Rui and Ishikawa, T. and Yamaguchi, T.; (2011) Red blood cell deformation in flows through a PDMS hyperbolic microchannel. In: Proceedings of Microtech Conference & Expo 2011. UNSPECIFIED, USA, p. 505.
Nicholls, W.D. and Borg, M.K. and Reese, J.M. (2011) Simulating the fast transport of water through carbon nanotubes. In: 14th NSTL Nanotech Conference, 2011-06-13 - 2011-06-16.
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Molecular dynamics simulation of dense gases. In: 3rd International GASMEMS Summer School and Workshop, 2011-06-06 - 2011-06-11, Universitario di Bertinoro.
Dumazer, Guillaume and Zhang, Yonghao and Reese, Jason (2011) Molecular dynamics of argon interaction with a copper surface. In: 3rd International GASMEMS Summer School and Workshop, 2011-06-06 - 2011-06-11, Universitario di Bertinoro.
Zuiani, Federico and Gibbings, Alison and Vasile, Massimiliano (2011) Robust design of deflection actions for non-cooperative targets. In: New Trends in Astrodynamics and Applications VI, 2011-06-06 - 2011-06-08.
Ure, James Michael and Chen, Haofeng and Chen, Weihang and Li, Tianbai and Tipping, James and Mackenzie, Donald (2011) A direct method for the evaluation of lower and upper bound ratchet limits. In: 11th International Conference on Mechanical Behaviour of Materials, 2011-06-05 - 2011-06-09.
Lima, Rui and Oliveira, Monica and Yaginuma, T. and Ishikawa, T. and Imai, Y and Yamaguchi, T.; (2011) Development of a microfluidic device for partial cell separation. In: Proceedings of the Japan-Portugal Nano-Biomedical Engineering (BME) Symposium 2011. UNSPECIFIED, PRT. ISBN 9781424441280
Pinho, F.T. and Lima, Rui and Alves, M.A. and Oliveira, Monica (2011) Transport Phenomena Research Center (CEFT) : Research complex flows of complex fluids. In: Japan-Portugal Nano-Biomedical Engineering Symposium 2011, BME2011, 2011-06-03 - 2011-06-06.
Sousa, P.C. and Pinho, F.T. and Alves, M.A. and Oliveira, Monica; (2011) Flow of a blood analogue solution through microchannels with bifurcations. In: Proceedings of the Japan-Portugal Nano-Biomedical Engineering (BME) Symposium 2011. UNSPECIFIED, PRT. ISBN 9781424441280
Fico, Vincenzo and Emerson, David and Reese, Jason (2011) A parallel compact-TVD method for compressible fluid dynamics employing shared and distributed-memory paradigms. Computers and Fluids, 45 (1). pp. 172-176. ISSN 0045-7930
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco (2011) Earth-Mars transfers with ballistic escape and low-thrust capture. Celestial Mechanics and Dynamical Astronomy, 110 (2). pp. 169-188. ISSN 0923-2958
Reese, Jason (2011) Water, water, everywhere, Nor any drop to drink? Physics World, 24 (6). pp. 28-32. ISSN 0953-8585
Rijal, Hom B. and Tuohy, Paul Gerard and Humphreys, Michael A. and Nicol, J. Fergus and Samuel, Aizaz Aamir (2011) An algorithm to represent occupant use of windows and fans including situation-specific motivations and constraints. Building Simulation, 4 (2). pp. 117-134. ISSN 1996-3599
Lees, Andrew and Wood, James (2011) Skills development and recoding in engineering analysis and simulation : Industry needs. In: NAFEMS World Congress, NWC2011, 2011-05-23 - 2011-05-26.
Gibbings, Alison and Hopkins, John-Mark and Burns, David and Vasile, Massimiliano (2011) On testing laser ablation processes for asteroid deflection. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.
Gibbings, Alison and Vasile, Massimiliano (2011) Impact cratering experiments into highly porous bodies. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.
Sanchez Cuartielles, Joan-Pau and Colombo, Camilla and McInnes, Colin (2011) Planetary protection efficiency by a small kinetic impactor. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.
Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Asteroid deflection and exploitation : possible synergies. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.
Madhlopa, Amos and Clarke, Joseph Andrew (2011) Theoretical study of the aspect ratio of a solar still with double slopes. In: World Renewable Congress, WREC 2011, 2011-05-08 - 2011-05-13.
Thomason, James and Carruthers, John and Kelly, James and Johnston, Gerard (2011) Fibre cross-section determination and variability in sisal and flax and its effects on fibre performance characterisation. Composites Science and Technology, 71 (7). pp. 1008-1015. ISSN 0266-3538
Liu, Haihu and Zhang, Yonghao (2011) Lattice Boltzmann simulation of droplet generation in a microfluidic cross-junction. Communications in Computational Physics, 9 (5). pp. 1235-1256. ISSN 1815-2406
Arbon, Ian and Brown, Colin and Fox, Tim and Knox, Andrew and Quail, Francis (2011) Scottish Energy 2020. Institution of Mechanical Engineers, London.
Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in-phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). 041201. ISSN 0094-9930
Ceriotti, Matteo and McInnes, Colin (2011) Generation of optimal trajectories for Earth hybrid pole sitters. Journal of Guidance, Control and Dynamics, 34 (3). pp. 847-859. ISSN 1533-3884
Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161
Dales, Richard and Mclaren, Andrew and Steiner, Simon (2011) Teaching International Students (TIS) : An Engineering Perspective with a Focus on Group and Project-Based Work. Engineering Subject Centre Report . Higher Education Academy, Loughborough, UK. ISBN 978-1-907632-14-3
Dongari, N. (2011) Liquid slip/stick over hydrophobic/hydrophilic surfaces and their implications in coating processes. Chemical Engineering and Processing: Process Intensification, 50 (5-6). pp. 450-453. ISSN 0255-2701
Dunlop, M. W. and Bingham, R. and Chapman, S. and Escoubet, P. and Zhang, Q-H. and Shen, C. and Shi, J-K and Trines, R. and Wicks, R. and Pu, Z-Y. and de-Keyser, J. and Schwartz, S. and Liu, Z-X (2011) Use of multi-point analysis and modelling to address cross-scale coupling in space plasmas : lessons from cluster. Planetary and Space Science, 59 (7). pp. 630-638. ISSN 0032-0633
Kelly, Mary E. and Brown, Richard (2011) Influence of blade aerodynamic model on prediction of helicopter rotor aeroacoustic signatures. Journal of Aircraft, 48 (3). pp. 1058-1083. ISSN 0021-8669
Li, Y. and Milbourn, D. and Baker, Thomas (2011) Effect of Vanadium microalloying on the HAZ microstructure and properties of low carbon steels. Journal of Iron and Steel Research International, 18 (Supple). pp. 393-403. ISSN 1006-706X
Macdonald, Martin and Heiyantuduwa, M.A. and Kotelko, Maria and Rhodes, James (2011) Web crippling behaviour of thin-walled lipped channel beams. Thin-Walled Structures, 49 (5). pp. 682-690. ISSN 0263-8231
Mckay, Robert J. and Macdonald, Malcolm and Biggs, James and McInnes, Colin (2011) Survey of highly non-Keplerian orbits with low-thrust propulsion. Journal of Guidance, Control and Dynamics, 34 (3). pp. 645-666. ISSN 1533-3884
Scheurich, F. and Fletcher, Timothy M. and Brown, Richard (2011) Effect of blade geometry on the aerodynamic loads produced by vertical-axis wind turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (3). pp. 327-341. ISSN 0957-6509
Quail, Francis and Stickland, M.T. and Baumgartner, A. (2011) A one-dimensional numerical model for the momentum exchange in regenerative pumps. Journal of Engineering for Gas Turbines and Power, 133 (9). 093001. ISSN 0742-4795
Gentles, Fiona Lamont and Thomason, James (2011) Determination of the fibre content of natural fibre composites through moisture absorption. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12.
Thomason, James and Gentles, Fiona Lamont and Carruthers, John (2011) Natural fibre reinforced epoxy composites : determination of fibre volume fraction, fibre mechanical properties and fibre cross-section variability. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12.
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2011) Buckling analysis of highly exurally anisotropic laminates with mixed boundary conditions. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12.
Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2011) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. In: 19th Conference of the Association for Computational Mechanics in Engineering, ACME 2011, 2011-04-05 - 2011-04-06.
Borg, Simon Paul and Kelly, Nicolas and Markopoulos, Anastasios and Strachan, Paul and Porteous, Colin and Sharpe, Tim (2011) Communal residential laundry washing and drying : can it provide demand-side electrical load flexibility? In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.
Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Shakedown analysis of a composite cylinder with a cross-hole. Journal of Pressure Vessel Technology, 133 (3). 031206. ISSN 0094-9930
Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kelly, Nicolas (2011) The implementation of discrete demand management algorithms within energy systems modelling. In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.
Counsell, John and Stewart, Matt John and Logan, Rufus and Doran, Sean and Ward, Wayne (2011) A novel DSM philosophy for building integrated renewable systems. In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.
Kelly, Nicolas and Hong, Jun and Richardson, Ian and Thomson, Murray (2011) The influence of thermal storage on microgeneration flexibility. In: Proceedings of the 2nd International Conference in Microgeneration Technologies, 2011-04-04 - 2011-04-06.
Lira, Lucas and Kelly, Nicolas and Cooper, Catherine and Duncan, Douglas (2011) Impact of residential energy system sizing and control over heat pump’s system cost and reliability. In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.
Lücking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive de-orbiting strategy for high altitude CubeSat missions using a deployable reflective balloon. In: 8th IAA Symposium on Small Satellites, 2011-04-04 - 2011-04-08.
Meng, Jian-Ping and Zhang, Yonghao and Shan, Xiaowen (2011) Multiscale lattice Boltzmann approach to modeling gas flows. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 83 (4). 046701. ISSN 2470-0053
Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207
Counsell, John M. and Khalid, Yousaf A. and Brindley, Joseph (2011) Controllability of buildings : a multi-input multi-output stability assessment method for buildings with slow acting heating systems. Simulation Modelling Practice and Theory, 19 (4). pp. 1185-1200. ISSN 1569-190X
Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2011) Helium additions to MIG shielding gas - an economic option? Welding and Cutting, 10 (2). pp. 118-121. ISSN 1612-3433
Henderson, Emma and Nash, David and Dempster, William (2011) On the experimental testing of fine Nitinol wires for medical devices. Journal of the Mechanical Behavior of Biomedical Materials, 4 (3). pp. 261-268. ISSN 1751-6161
Holmes, Brian and O'Conner, Michael and Neumann, Frank and Frigaard, Peter and Kofoed, Jens Peter and Pecher, Arthur and Margarheritini, Lucia and Myers, Luke and Bahaj, AbuBakr and Gardner, Fred E. and Prado, Miguel and Soerensen, Hans Christian and Retzler, Chris and Bittencourt, Claudio and Flinn, Jonathan and Johnstone, Cameron and Mccombes, Tom; (2011) Sea trials. In: Protocols of the Equitable Assessment of Marine Energy Converters. University of Edinburgh, Edinburgh, pp. 187-226. ISBN 978-0-9508920-1-6
Marinosci, C. and Strachan, Paul and Semprini, G. and Morini, G.L. (2011) Empirical validation and modelling of a naturally ventilated rainscreen facade building. Energy and Buildings, 43 (4). pp. 853-863. ISSN 0378-7788
Mccombes, Tom and Johnstone, Cameron and Grant, Andrew and Holmes, Brian and Barrett, Sean and Kofoed, Jens Peter and Myers, Luke and AbuBakr, Bahaj and Heller, Valentin and Bittencourt, Claudio; (2011) Tank testing. In: Protocols for the Equitable Assessment of Marine Energy Converters. University of Edinburgh, Edinburgh, UK, 145-186, Chapter IIA. ISBN 978-0-9508920-1-6
Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2011) Fluent User Defined Function: Zephir_comp_sim : NORSEWInD Report UoSNW017. University of Strathclyde, Glasgow.
Thomason, James and Porteus, G. (2011) Swelling of glass-fibre reinforced Polyamide 66 during conditioning in water, ethylene glycol and antifreeze mixture. Polymer Composites, 32 (4). pp. 639-647. ISSN 0272-8397
Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2011) An inflationary differential evolution algorithm for space trajectory optimization. IEEE Transactions on Evolutionary Computation, 15 (2). pp. 267-281. ISSN 1089-778X
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Molecular free path distribution in rarefied gases. Journal of Physics D: Applied Physics, 44 (12). Article 125502. ISSN 1361-6463
Carus, David and Hamilton, Robert (2011) Training shoe will improve mobility in elderly people. The Scotsman.
McInnes, Colin and Ceriotti, Matteo and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and Bewick, Russell and Heiligers, Jeannette and Lucking, Charlotte (2011) Micro-to-Macro : astrodynamics at extremes of length-scale. Acta Futura, 4. pp. 81-97.
Scheurich, Frank and Brown, Richard (2011) Vertical-axis wind turbines in oblique flow: sensitivity to rotor geometry. In: EWEA Annual event (formerly known as EWEC), 2011-03-14 - 2011-03-17.
Meng, Jian-Ping and Zhang, Yonghao (2011) Gauss-Hermite quadratures and accuracy of lattice Boltzmann models for non-equilibrium gas flows. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 83 (3). Article 036704. ISSN 2470-0053
Jana, B.D. and Stack, M.M. (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. Wear, 270 (7-8). pp. 439-445. ISSN 0043-1648
Murphy, Gavin B. and Kummert, M. and Anderson, B.R. and Counsell, John M. (2011) A comparison of the UK Standard Assessment Procedure and detailed simulation of solar energy systems for dwellings. Journal of Building Performance Simulation, 4 (1). pp. 75-90. ISSN 1940-1493
Murray, Michael and Forbes, Doug and Mason, Steve (2011) Considerate constructors scheme : Glenfarg water treatment works. Proceedings of the ICE - Engineering Sustainability, 164 (1). pp. 49-57. ISSN 1478-4629
Avanzini, Giulio and Bernardo, Luca and Giuletti, Fabrizio and Minisci, Edmondo (2011) Optimal rotation sequences in presence of constraints on admissable rotation axes. Journal of Guidance, Control and Dynamics, 34 (2). pp. 554-563. ISSN 1533-3884
Kelly, Mary E. and Brown, Richard (2011) Influence of blade aerodynamic model on the prediction of helicopter high-frequency airloads. Journal of Aircraft, 48 (2). pp. 476-494. ISSN 0021-8669
Scheurich, Frank and Fletcher, Timothy M. and Brown, Richard (2011) Simulating the aerodynamic performance and wake dynamics of a vertical-axis wind turbine. Wind Energy, 14 (2). pp. 159-177. ISSN 1095-4244
Schütze, Oliver and Vasile, Massimiliano and Coello Coello, Carlos A. (2011) Computing the set of Epsilon-efficient solutions in multiobjective space mission design. Journal of Aerospace Computing, Information, and Communication, 8 (3). pp. 53-70. ISSN 1542-9423
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Effect of the contraction ratio upon viscoelastic fluid flow in three-dimensional square-square contractions. Chemical Engineering Science, 66 (5). pp. 998-1009. ISSN 0009-2509
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Extensional flow of blood analogue solutions in microfluidic devices. Biomicrofluidics, 5 (1). 014108. ISSN 1932-1058
Meng, Jian-Ping and Zhang, Yonghao (2011) Accuracy analysis of high-order lattice Boltzmann models for rarefied gas flows. Journal of Computational Physics, 230 (3). pp. 835-849. ISSN 0021-9991
Anderson, Pamela and Macdonald, Malcolm; (2011) Extension of the Molniya orbit using low-thrust propulsion. In: Spaceflight Mechanics 2011. Advances in the Astronautical Sciences, 140, Part . Univelt Inc, USA, pp. 1943-1962. ISBN 978-0-87703-569-5
Macdonald, Malcolm; Hall, Jason, ed. (2011) Solar Sailing: applications and technology advancement. In: Advances in Spacecraft Technologies. InTech, Chapter 2. ISBN 978-953-307-551-8
Madhlopa, Amos and Johnstone, Cameron (2011) Computation of solar radiation distribution in a solar still with internal and external reflectors. Solar Energy, 85 (2). pp. 217-233. ISSN 0038-092X
Mingotti, Giorgio and Topputo, Francesco; (2011) Ways to the Moon : A survey. In: Spaceflight Mechanics 2011. Advances in the Astronautical Sciences, 140 . Univelt Inc, USA, pp. 2531-2547. ISBN 978-0-87703-569-5
Phillips, Catriona and Brown, Richard and Kim, Hyo Wan (2011) Helicopter brownout - can it be modelled? Aeronautical Journal, 115 (1164). pp. 123-133. ISSN 0001-9240
Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2011) Fluent User Defined Function: WindCube_comp_sim : NORSEWInD Report UOSNW013. University of Strathclyde, Glasgow.
Clarke, Joseph and Bradley, Fiona and Nugent, Karen (2011) Embedding Simplified Post Occupancy Evaluation Within The Design Process. In: CIC Start Online: Webinar 1 - Embedding Simplified Post Occupancy Evaluation within the Design Process, 2011-01-25 - 2011-01-25. (Unpublished)
Karagiannakis, Philippos and Weiss, Stephan and Macdonald, Malcolm and Bowman, J. and O'Sullivan, John (2011) CubeSat networks for fractionalised spacecraft : A review. In: 1st IAA Conference on University Satellites Missions and CubeSat, 2015-01-24 - 2015-01-29.
Abid, Muhammad and Nash, David and Parvez, Shahid and Fawad, Hassan (2011) Simulation of stationary GTAW process using argon as shielding gas : effect of electrode angle and tip angles in butt welding. In: 8th International Bhurban Conference on Applied Science and Technology, IBCAST08, 2011-01-10 - 2011-01-13.
Hughes, Ben Richard and Chaudhry, Hassam Nasarullah (2011) Power generation potential of dynamic architecture. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 73. pp. 288-294. ISSN 2010-3778
Kelly, N.J. and Cockroft, J. (2011) Analysis of retrofit air source heat pump performance : results from detailed simulations and comparison to field trial data. Energy and Buildings, 43 (1). pp. 239-245. ISSN 0378-7788
Novak, D.M. and Vasile, Massimiliano (2011) Improved shaping approach to the preliminary design of low-thrust trajectories. Journal of Guidance, Control and Dynamics, 34 (1). pp. 128-147. ISSN 1533-3884
Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Asteroid resource map for near-Earth space. Journal of Spacecraft and Rockets, 48 (1). pp. 153-165. ISSN 0022-4650
Biggs, J.D. and Waters, T. and McInnes, C.R.; Machado, J.A.T. and Luo, A.C.J. and Barbosa, R.S. and Silva, M.F. and Figueiredo, L.B., eds. (2011) New periodic orbits in the solar sail three-body problem. In: Nonlinear Science and Complexity. Springer, Porto, Portugal, pp. 131-138. ISBN 9789048198832
Kuhn, Tilmann and Herkel, Sebastian and Frontini, Francesco and Strachan, Paul and Kokogiannakis, Georgios (2011) Solar control : a general method for modelling of solar gains through complex facades in building simulation. Energy and Buildings, 43 (1). pp. 19-27. ISSN 0378-7788
Quail, Francis and Scanlon, T.J. and Stickland, M.T. (2011) Design optimisation of a regenerative pump using numerical and experimental techniques. International Journal of Numerical Methods for Heat and Fluid Flow, 21 (1). pp. 95-111. ISSN 0961-5539
Tian, Qing and Wu, Lei and Zhang, J. F. and Malomed, B. A. and Mihalache, D. and Liu, W. M. (2011) Exact soliton solutions and their stability control in the nonlinear Schrodinger equation with spatiotemporally modulated nonlinearity. Physical Review E, 83 (1). 016602. ISSN 2470-0053
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason; (2011) The importance of mean free path in determining gas micro flow behaviour. In: Proceedings of the 8th International Conference on Nanochannels, Microchannels and Minichannels 2010. American Society of Mechanical Engineers, New York, pp. 481-490. ISBN 9780791854501
Fallani, Matteo and Amarri, Sergio and Uusijarvi, Agneta and Adam, Rüdiger and Khanna, Sheila and Aguilera, Marga and Gil, Angel and Vieites, Jose M and Norin, Elisabeth and Young, David and Scott, Jane A and Doré, Joël and Edwards, Christine A, the INFABIO team (2011) Determinants of the human infant intestinal microbiota after the introduction of first complementary foods in infant samples from five European centres. Microbiology, 157 (Pt 5). pp. 1385-1392. ISSN 1465-2080
Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2011) The micropolar properties of bone. In: 1st International Symposium on Numerical Simulation in Orthopaedic Biomechanics (SimOrtho), 2011-08-26 - 2011-08-27.
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco; (2011) A method to design efficient low-energy, low-thrust transfers to the Moon. In: Nonlinear and Complex Dyanmics. Springer New York, New York, pp. 15-37. ISBN 978-1-4614-0230-5
Simo, Jules and McInnes, Colin; (2011) Solar sail orbits at the Earth-Moon libration points. In: Nonlinear Science and Complexity. Springer, PRT, pp. 147-155. ISBN 978-90-481-9883-2
Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A.; Tavares, J.M.R.S. and Jorge, R.M.N., eds. (2011) Flow of a blood analogue solution through microfabricated hyperbolic contractions. In: Computational Vision and Medical Image Processing. Computational Methods in Applied Sciences, 19 (1st). Springer London, London, Ch 15 pp 265-279. ISBN 978-94-007-0010-9
Zanzottera, Anna and Mingotti, Giorgio and Castelli, Roberto and Dellnitz, Michael; (2011) Low-energy Earth-to-halo transfers in the Earth Moon scenario with Sun-perturbation. In: Nonlinear and Complex Dynamics. Springer New York, New York, pp. 39-51. ISBN 978-1*4614-0230-5
2010
Mathew, Mathew T and Ariza, E. and Rocha, L.A. and Vaz, F. and Fernandes, A.C. and Stack, Margaret (2010) Tribo-Corrosion behaviour of TiCxOy thin films in bio fluids. Electrochimica Acta, 56 (2). pp. 929-937. ISSN 0013-4686
Liu, H. and Zhang, Y.H. (2010) Phase-field modeling droplet dynamics with soluble surfactants. Journal of Computational Physics, 229 (24). pp. 9166-9187. ISSN 0021-9991
Dongari, Nishanth and Reese, Jason and Zhang, Yonghao (2010) Molecular dynamics studies of solid-fluid interactions in rarefied gas flows. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) Molecular dynamics studies of anomalous transport in rarefied gas flows. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.
Ozdemir, Pinar and Liu, Haihu and Zhang, Yonghao and Mohr, S. and Godden, N and Fielden, P.R. and Wang, C (2010) Experimental study of droplet formation at microfluidic T-junctions. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.
White, Craig and Borg, Matthew Karl and Reese, Jason (2010) A controller method of DSMC gas micro-channel flow simulations. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.
Hodge, C. and Stack, M.M. (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. Wear, 270 (1-2). pp. 104-114. ISSN 0043-1648
Abid, M. and Awan, A.W. and Nash, David (2010) Performance of a nongasketed flange joint combined internal pressure and bending loading. Journal of Engineering Mechanics, 136 (12). pp. 1519-1527.
Ceriotti, M. and Vasile, M. (2010) MGA trajectory planning with an ACO-inspired algorithm. Acta Astronautica, 67 (9-10). pp. 1202-1217. ISSN 0094-5765
Chen, Haofeng (2010) Linear matching method for design limits in plasticity. Computers, Materials and Continua - Tech Science Press, 20 (2). pp. 159-183. ISSN 1546-2218
Hamilton, Robert and Mackenzie, Donald and Li, Hongjun (2010) Multi-physics simulation of friction stir welding process. Engineering Computations, 27 (8). pp. 967-985. ISSN 0264-4401
Pan, Wenke and Wheel, Marcus and Qin, Yi (2010) Six-node triangle finite volume method for solids with a rotational degree of freedom for incompressible material. Computers and Structures, 88 (23-24). pp. 1506-1511. ISSN 0045-7949
Scanlon, T.J. and Roohi, E. and White, C. and Darbandi, M. and Reese, J.M. (2010) An open source, parallel DSMC code for rarefied gas flows in arbitrary geometries. Computers and Fluids, 39 (10). pp. 2078-2089. ISSN 0045-7930
Stack, M. M. and Hong, Ting-Fu and Wang, Hsin-Chun and Wang, Moo-Chin and Li, Wang-Long (2010) On the construction of wear maps for Y-TZP dental ceramics in aqueous environments : pH, exposure time and impact angle effects. Tribology International, 43 (12). pp. 2258-2267. ISSN 0301-679X
Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) Some perspectives on modelling the effect of temperature on the erosion-corrosion of Fe in aqueous conditions. Tribology International, 43 (12). pp. 2279-2297.
Pan, Yiqun and Li, Yunming and Shi, Jie and Wang, Chunxiang and Jeong, Kwan Seok and Kim, Jaemin and Lee, Ji Young and Johnstone, Cameron and Hong, Jun and Park, Ji Young and Park, Gyoung Min; (2010) Optimal design of multi-utility complex for a low carbon city in China integrating renewable energy. In: Energy Systems Analysis, Thermodynamics and Sustainability; NanoEngineering for Energy; Engineering to Address Climate Change, Parts A and B. ASME 2010 International Mechanical Engineering Congress and Exposition, 5 . American Society of Mechanical Engineers (ASME), pp. 533-540. ISBN 9780791844298
Colombo, C. and Lucking, Charlotte and McInnes, C.R. (2010) Orbit evolution, maintenance and disposal of SpaceChip swarms. In: 6th International Workshop on Satellite Constellation andFormation Flying, IWSCFF 2010, 2010-01-01 - 2010-01-03.
Clarke, Joseph and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie Eugenia (2010) Analysis of a single point tensioned mooring system for station keeping of a contra-rotating marine current turbine. IET Renewable Power Generation, 4 (6). pp. 473-487. ISSN 1752-1416
Fletcher, Timothy M. and Brown, Richard (2010) Helicopter tail rotor thrust and main rotor wake coupling in crosswind flight. Journal of Aircraft, 47 (6). pp. 2136-2148. ISSN 0021-8669
Li, Maodeng and Macdonald, M. and McInnes, C.R. and Jing, Wuxing (2010) Analytical landing trajectories for embedded autonomy. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224 (11). pp. 1177-1191. ISSN 0954-4100
Macdonald, M. and McKay, R.J. and Vasile, M. and Bosquillon de Frescheville, Francois (2010) Extension of the sun-synchronous Orbit. Journal of Guidance, Control and Dynamics, 33 (6). pp. 1935-1940. ISSN 1533-3884
Minak, Giangiacomo and Palazzetti, Roberto and Trendafilova, Irina and Zucchelli, Andrea (2010) Localization of a delamination and estimation of its length in a composite laminate beam by the VSHM and pattern recognition methods. Mechanics of Composite Materials, 46 (4). pp. 387-394. ISSN 0191-5665
Mingotti, Giorgio and Gurfil, Pini (2010) Mixed low-thrust invariant-manifold transfers to distant prograde orbits around Mars. Journal of Guidance, Control and Dynamics, 33 (6). pp. 1753-1764. ISSN 1533-3884
Staffell, Iain and Baker, Philip and Barton, John P and Bergman, Noam and Blanchard, Richard and Brandon, Nigel P and Brett, Daniel J L and Hawkes, Adam and Infield, David and Jardine, Christian N and Kelly, Nicolas and Leach, Matthew and Matian, Mardit and Peacock, Andrew D and Sudtharalingam, Sohasini and Woodman, Bridget (2010) UK microgeneration. Part II : technology overviews. Proceedings of the ICE - Energy, 163 (4). pp. 143-165. ISSN 1751-4223
Cattani, Carlo and Seyraman, Alexander and Trendafilova, Irina (2010) Nonlinear vibrations, stability, analysis and control. Mathematical Problems in Engineering, 3. 873047. ISSN 1024-123X
Meng, Jianping and Zhang, Yonghao (2010) Analytical solution for the lattice Boltzmann model beyond Naviers-Stokes. Advances in Applied Mathematics and Mechanics, 2 (5). pp. 670-676. ISSN 2070-0733
Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16.
Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) A CFD model of erosion-corrosion of Fe at elevated temperatures in aqueous environments. Advances in Science and Technology (72). pp. 75-86. ISSN 1662-8969
Johnstone, Cameron and Holmes, Brian and AbuBakr, Bahaj (2010) The need for performance appraisal procedures for ocean energy converters. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08.
Johnstone, Cameron and Pratt, D. and Clarke, Joseph Andrew and Grant, Andrew (2010) The need for tidal energy to be cost competitive with offshore wind power. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08.
Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew (2010) Contra rotating marine turbines tank tests to analyse system dynamic response. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08.
Fletcher, Timothy M. and Brown, Richard (2010) Simulation of wind turbine wake interaction using the vorticity transport model. Wind Energy, 13 (7). pp. 587-602. ISSN 1095-4244
Neilson, Robbie and Wood, J. and Hamilton, R. and Li, H. (2010) A comparison of plastic collapse and limit loads for single mitred pipe bends under in-plane bending. International Journal of Pressure Vessels and Piping, 87 (10). pp. 550-558. ISSN 0308-0161
Vasile, M. and Ceriotti, M.; Conway, B.A., ed. (2010) Incremental techniques for global space trajectory design. In: Spacecraft Trajectory Optimization. Cambridge Aerospace Series, Chapter 8 . Cambridge University Press, Cambridge, UK, Chapter 8. ISBN 9780521518505
Ceriotti, Matteo and Vasile, Massimiliano (2010) Automated multigravity assist trajectory planning with a modified ant colony algorithm. Journal of Aerospace Computing, Information, and Communication, 7 (9). pp. 261-293. ISSN 1542-9423
Anderson, Pamela and Macdonald, M. (2010) Extension of earth orbits using low-thrust propulsion. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Bewick, R. and Sanchez, J.P. and McInnes, C.R. (2010) An L1 positioned dust cloud as an effective method of space-based geoengineering. In: International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01.
Ceccaroni, M. and Biggs, J.D. (2010) Extension of low-thrust propulsion to the autonomous coplanar circular restricted four body problem with application to future Trojan Asteroid missions. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Colombo, C. and McInnes, C.R. (2010) Orbit design for future SpaceChip swarm missions. In: 61st Aeronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01.
Gibbings, Alison and Zuiani, Federico and Vasile, Massimiliano (2010) Orbit determination and control for the European Student Moon Orbiter. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Gibbings, Alison and Zuiani, Federico and Vasile, Massimiliano and Novak, Daniel (2010) Optimal design of low-energy transfers to highly eccentric frozen orbits around the moon. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Heiligers, J. (2010) Displaced geostationary orbits using hybrid low-thrust propulsion. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Lucking, Charlotte and Colombo, C. and McInnes, C.R. (2010) Orbit control of high area-to-mass ratio spacecraft using electrochromic coating. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Novac, Daniel and Vasile, Massimiliano (2010) Incremental solution of LTMGA transfers transcribed with an advanced shaping approach. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Parvez, Shahid and Abid, Muhammad and Fawad, Hassan and Nash, David (2010) The effect of electrode tip angle on arc and anode temperature in GTAW. In: 7th Jordanian International Mechanical Engineering Conference, JIMEC'7, 2010-09-27 - 2010-09-29.
Sanchez, J.P. and McInnes, C.R. (2010) Assessment on the feasibility of future shepherding of asteroid resources. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Vasile, Massimiliano and Cartmell, M. and Dejene, F.Z. and Drysdale, T. and Flores, M.A. and Gulzar, M.Y. and Ismail, N. and Khalid, M.U. and Li, M. and Maddock, Christie and Mallol, P. and Mathieson, A. and McRobb, M. and Öberg, J. and Reynolds, P. and Ritterbusch, R. and Sandqvist, W. and Summerer, L. and Tanveer, M.U. and Tibert, G. and Whyte, G. and Zafar, W. and Zhang, J. (2010) The Suaineadh Project : a stepping stone towards the deployment of large flexible structures in space. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Vasile, Massimiliano and Maddock, Christie and Saunders, C. (2010) Orbital debris removal with solar concentrators. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Vasile, Massimiliano and Summerer, Leopold (2010) Multi-objective optimisation of integrated space-based and terrestrial solar energy systems. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Zuiani, Federico and Vasile, Massimiliano and Palmas, Alessandro and Avanzini, Giulio (2010) Direct transcription of low-thrust trajectories with finite trajectory elements. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.
Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron (2010) Assessing the impact of demand management on the viability of polygeneration at the urban scale. In: 11th World Renewable Energy Congress, WREC XI, 2010, 2010-09-25 - 2010-09-30.
Johnstone, Cameron and Kim, Jae Min and Martin, M. and Oh, Jin-Sook and Kang, Hoon; (2010) Internet-based remote condition monitoring of a building integrated wind-PV hybrid energy system. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612
Johnstone, Cameron and Pratt, D. and Clarke, Joseph Andrew and Grant, Andrew; (2010) A techno-economic appraisal of a tensioned mooring supported, contra-rotating tidal turbine. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612
Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew and Rose, Samuel; (2010) Experimental tank testing of contra rotating marine turbines to quantify the parameters influencing system dynamic response. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612
Gibbings, Alison and Komninou, Eirini and Vasile, Massimiliano (2010) Kinematic impactors : Improved modelling of asteroid deflection from an experimental and numerical approach. In: European Planetary Science Congress, 2010-09-19 - 2010-09-24.
Quail, Francis J. and Stickland, M.T. and Baumgartner, B.; (2010) Design study of a novel regenerative pump using experimental and numerical techniques. In: Proceedings of the 11th European Fluid Machinery Congress. Woodhead Publishing. ISBN 978-0-85709-091-1
Bennet, Derek J. and Biggs, J.D. and McInnes, C.R. and Macdonald, M. (2010) An analysis of dissipation functions in swarming systems. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10.
Biggs, J.D. (2010) Singularities of optimal attitude motions. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10.
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) Power-law free path distribution function for thermal transpiration. In: 2nd GASMEMS Summer School & Workshop, GASMEMS 10, 2010-09-05 - 2010-09-10, Provence.
Thomason, J.L. (2010) Interfacial strength in fibre reinforced thermoplastics. In: International Conference on Interfaces & Interphases in Multicomponent Materials (IIMM), 2010-09-01 - 2010-09-03.
Borg, Matthew Karl and Macpherson, Graham and Reese, Jason (2010) Controllers for imposing continuum-to-molecular boundary conditions in arbitrary fluid flow geometries. Molecular Simulation, 36 (10). pp. 745-757. ISSN 1029-0435
Li, Y. and Baker, T.N. (2010) Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology, 26 (9). pp. 1029-1040. ISSN 0267-0836
Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm; (2010) Swarm shape manipulation through connection control. In: Towards Autonomous Robotis Systems. Lecture Notes in Artificial Intelligence, 6856 (1). Springer, GBR. ISBN 978-3-642-23231-2
Thomason, J.L. (2010) Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites. Polymer Composites, 31 (9). pp. 1525-1534. ISSN 0272-8397
Yang, Liu and Thomason, J.L. (2010) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods. Composites Part A: Applied Science and Manufacturing, 41 (9). pp. 1077-1083. ISSN 1359-835X
Chacon-Nava, J. G. and Martinez-Villafañe, A. and Almeraya-Calderon, F. and Cabral-Miramontes, J.A. and Stack, M.M. (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X
Punzo, Giuliano and Bennet, Derek J. and Macdonald, M. (2010) Swarm shape manipulation through connection control. In: 12th Conference Towards Autonomous Robotic Systems 2011, 2011-08-31 - 2011-09-02.
Stack, M.M. (2010) Tribo-corrosion maps for application in bio-tribology : some new approaches. In: UK-China Summer School and Workshop on Tribology and Surface Engineering, 2010-08-24 - 2010-08-25.
Colombo, C. and McInnes, C.R. (2010) Orbital dynamics of earth-orbiting 'smart dust' spacecraft under the effects of solar radiation pressure and aerodynamic drag. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05.
Brindley, Joseph and Counsell, John and Zaher, Obadah Samir (2010) Design of a non-linear missile autopilot design using Rate Actuated Inverse Dynamics (RAID). In: AIAA Guidance, Navigation and Control Conference, 2010-08-02 - 2010-08-05. (Unpublished)
Ceriotti, M. and McInnes, C.R. (2010) An earth pole-sitter using hybrid propulsion. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05.
Counsell, J.M. and Zaher, O.S. and Brindley, Joseph; (2010) Auto-tuning for high performance autopilot design. In: AIAA guidance, navigation, & control conference et al (2010) online proceedings. American Institute of Aeronautics and Astronautics, Toronto, Canada.
Mckay, Robert and Macdonald, M. and Vasile, M. and Bosquillon de Frescheville, Francois (2010) A novel interplanetary communications relay. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05. (Unpublished)
Sanchez, J.P. and McInnes, Colin R. (2010) Accessibility of the resources of near Earth space using multi-impulse transfers. In: 2010 AIAA/AAS Astrodynamics Specialist Conference, 2010-08-02 - 2010-08-05.
Brown, Blair and McInnes, C.R. and Allouis, E. (2010) Dynamic autonomous intelligent control of an asteroid lander. Journal of Aerospace Engineering, 224 (8). pp. 865-879. ISSN 0893-1321
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) The importance of mean free path in determining gas flow behaviour. In: 8th International Conference on Nanochannels, Microchannels and Minichannels, 2010-08-01 - 2010-08-05.
Fidalgo, C. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Imai, Y and Yamaguchi, T. (2010) Measuring the cell-free layer in circular microchannels. In: 6th World Congress of Biomechanics, WCB2010, 2010-08-01 - 2010-08-06.
Li, H. and Mackenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 2041-2975
Nicholls, William and Borg, Matthew Karl and Reese, Jason; (2010) Molecular dynamics simulations of liquid flow in and around carbon nanotubes. In: ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels: Parts A and B. ASME, CAN, pp. 979-985. ISBN 978-0-7918-5450-1
Oliveira, Monica and Lima, Rui and Ishikawa, T. and Matsuki, M. and Imai, Y and Yamaguchi, T. (2010) Blood-on-chips : flow through complex geometries. In: 6th World Congress of Biomechanics, WCB2010, 2010-08-01 - 2010-08-06.
Taylor, Ian and Robertson, Andrew Colin (2010) Numerical simulation of rivulet dynamics associated with rain- wind-induced vibration. In: ASME Summer Meeting - 7th International Conference on Fluid-Structure Interactions, Flow-Sound Interactions and Flow-induced Vibration and NoisE, 2010-08-01 - 2010-08-05.
Chen, H.F. and Ponter, Alan R.S. (2010) A direct method on the evaluation of ratchet limit. Journal of Pressure Vessel Technology, 132 (4). 041202. ISSN 0094-9930
Minisci, Edmondo and Liqiang, Hou and Vasile, Massimiliano (2010) Multidisciplinary design of a micro-USV for re-entry operations. In: AAS/AIAA Astrodynamic Specialists Conference 2010, 2010-08-02.
Trendafilova, I. (2010) An automated procedure for detection and identification of ball bearing damage using multivariate statistics and pattern recognition. Mechanical Systems and Signal Processing, 24 (6). pp. 1858-1869. ISSN 0888-3270
Biggs, James and Holderbaum, William (2010) Integrable quadratic Hamiltonians on the Euclidean group of motions. Journal of Dynamical and Control Systems, 16 (3). pp. 301-317. ISSN 1079-2724
Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2010) Shakedown behaviour of composite cylinders with cross holes. In: Proceedings of the ASME Pressure Vessels and Piping Conference 2010, 2010-07-18 - 2010-07-22.
Ceriotti, M. and McInnes, C.R. (2010) A near term pole-sitter using hybrid solar sail propulsion. In: 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22.
Macdonald, M. and McInnes, C.R. (2010) Solar sail mission applications and future advancement. In: 2nd International Symposiun on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22.
Borggrafe, Andreas and Dachwald, Bernd (2010) Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients. In: 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22.
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Elastic instabilities and efficient microfluidic rectifiers. In: Workshop on Flow Instabilities and Turbulence in Viscoelastic Fluids, 2010-07-19 - 2010-07-23.
Stack, M.M. and Rodling, J. and Mathew, M.T. and Jawan, H. and Huang, W. and Park, G. and Hodge, C. (2010) Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution : an approach to construction of mechanism and synergism maps for application to bio-implants. Wear, 269 (5-6). pp. 376-382. ISSN 0043-1648
Avanzini, Giulio and Minisci, Edmondo (2010) Evolutionary design of a full–envelope flight control system for an unstable fighter aircraft. In: IEEE Congress on Evolutionary Computation (CEC) 2010, 2010-07-18.
Carmichael, Rory and Mackenzie, Donald; (2010) Elastic-plastic design by analysis for gross plastic collapse. In: Proceedings of the ASME pressure vessels and piping conference 2010. Pressure Vessels and Piping Division of ASME, 2 . American Society of Mechanical Engineers, USA, pp. 81-87. ISBN 978-0-7918-4921-7
Ceriotti, M. and Vasile, M.; (2010) An ant system algorithm for automated trajectory planning. In: 2010 Congress on evolutionary computation (CEC). IEEE Congress on Evolutionary Computation . IEEE, Barcelona, Spain. ISBN 9781424481262
Ceriotti, M. and Vasile, M. (2010) An ant system algorithm for automated trajectory planning. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23, Barcelona, Spain.
Schutze, O. and Lara, A. and Coello Coello, Carlos A. and Vasile, Massimiliano (2010) Computing approximate solutions of scaler optimization problems and applications in space mission design. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23.
Vasile, Massimiliano and Zuiani, Federico (2010) A hybrid multi-objective optimization algorithm applied to space trajectory. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23.
Sousa, P.C. and Afonso, A.M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2010) Microfluidic flows of viscoelastic fluids. In: Vth Brazilian Conference on Rheology, 2010-07-14 - 2010-07-16.
Brindley, Joseph and Counsell, John and Pearce, John G (2010) Modelling and simulation of advanced non-linear autopilot designs. In: Grand Challenges in Modelling and Simulation Conference, 2010-07-11 - 2010-07-14.
Whyte, G. and Murray, C. and Maddock, Christie and Vasile, Massimiliano and Drysdale, T.D.; (2010) Integrated 915 MHz dual-patch circularly polarized antenna for Suaineadh space web experiment. In: Proceedings of the IEEE Symposium on Antennas and Propagation. Antennas and Propagation . IEEE, CAN, pp. 1-4. ISBN 978-1-4244-4968-2
Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Effects of partial wrist arthrodesis on loading at the radiocarpal joints. In: 17th Congress of the European Society of Biomechanics, 2010-07-05 - 2010-07-08. (Unpublished)
Roy, Mannish and Pauschitz, A. and Stack, Margaret (2010) Guest Editorial: Tribocorrosion 2009: East meets West. Tribology International, 43 (7). pp. 1201-1202. ISSN 0301-679X
Stack, M.M. and Abdulrahmen, G.H. (2010) Mapping erosion-corrosion of carbon steel in oil exploration conditions : some new approaches to characterizing mechanisms and synergies. Tribology International, 43 (7). pp. 1268-1277. ISSN 0301-679X
Thomason, J.L. and Ali, J.Z. and Anderson, J. (2010) The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 41 (7). pp. 820-826. ISSN 1359-835X
Vasile, Massimiliano and Maddock, Christie and Saunders, C. and Sorel, M. and Watson, Ian A. (2010) Active orbital debris removal by enhanced solar light. In: European Workshop on Active Debris Removal, 2010-06-22 - 2010-06-22.
Borg, Matthew Karl and Nicholls, William and Reese, Jason; (2010) Hybrid molecular dynamics and Navier-Stokes method in complex nanoflow geometries. In: Nanotech 2010. Taylor and Francis, CRC Press, USA. ISBN 9781439834183
Borg, Matthew Karl and Nicholls, William and Reese, Jason; (2010) MD boundary conditions for pressure gradient flows : nano-mixing and nano-droplet deformation in extensional flows. In: Nanotech 2010. Taylor & Francis, USA. ISBN 9781439834183
Wu, Zhangming and Wright, Mike T. and Ma, Xianghong (2010) The experimental evaluation of the dynamics of fluid-loaded microplates. Journal of Micromechanics and Microengineering, 20 (7). 075034. ISSN 0960-1317
Brown, R.E. and Phillips, Catriona and Kim, Hyo Wan (2010) Helicopter brownout - can it be modelled? In: Royal Aeronautical Society Rotorcraft Group Conference: Operating Helicopters Safely in a Degraded Visual Environment, 2010-06-16 - 2010-06-17.
McLaren, A.J. and Jenkins, Peter (2010) Mechanical dissection in an introductory engineering design module. In: 6th International CDIO Conference, 2010-06-15 - 2010-06-18.
Pugh, Alistair William and Hamilton, Robert and Nash, David and Otto, S.R.; (2010) Characterisation of the materials in golf ball construction for use in finite element analysis. In: Engineering Sport and Engineering Emotion. Procedia Engineering, 2 . International Sports Engineering Association, AUT, pp. 3234-3236.
Gentles, F. and Anderson, J. and Thomason, J.L. (2010) Characterisation of the transverse thermoelastic properties of natural fibres used in composites. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10.
Palazzetti, Roberto and Trendafilova, Irina and Zucchelli, Andrea and Minak, Giangiacomo (2010) Delamination localisation and length estimation in composite laminate beam by VSHM and pattern recognition methods. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10. (Unpublished)
Reilly, S.P. and Thomason, J.L. (2010) Effects of silane coating on the properties of glass fibre and glass fibre reinforced epoxy resin. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10.
Thomason, J.L. and Yang, Liu (2010) The influence of thermal stress on the interface strength of a fibre-reinforced thermoplastic investigated by a novel single fibre technique. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10.
Yang, Liu and Thomason, J.L. and Zhu, W.Z. (2010) The influence of oxidative-thermal degradation of polypropylene on measured interface strength of glass fibre-polypropylene. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10.
Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Finite element model creation and stability considerations of complex biological articulation : the human wrist joint. Medical Physics, 32 (5). pp. 523-531. ISSN 0094-2405
Manoach, Emil and Trendafilova, Irina; (2010) Damage detections in nonlinear vibrating thermally loaded plates. In: Materials with complex behaviour. Advanced Structural Materials . Springer-Verlag, Berlin Heidelberg, pp. 193-211. ISBN 9783642126673
Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Efficient microfluidic rectifiers for viscoelastic fluid flow. Journal of Non-Newtonian Fluid Mechanics, 165 (11-12). pp. 652-671. ISSN 0377-0257
Stack, M.M. and Abdelrahman, S.M. (2010) CFD modelling of erosion-corrosion of steel in aqueous environments : particle concentration effects on the regime boundaries. In: 14th Nordic Conference on Tribology, NordTrib 2010, 2010-06-08 - 2010-06-11.
Vasile, Massimiliano and Maddock, Christie (2010) On the deflection of asteroids with mirrors. Celestial Mechanics and Dynamical Astronomy, 107 (1-2). pp. 265-284. ISSN 0923-2958
Gibbings, Alison and Novak, Daniel and Zuiani, Federico and Vasile, Massimiliano (2010) Navigation analysis and manoeuvres design for the European Student Moon Orbiter. In: Small Satellites Systems and Services, The 4S Symposium, 2010-05-31 - 2010-06-04.
Pan, Wenke and Boyle, Jim and Ramlan, Mohd. and Dun, Craig and Ismail, Mohd. and Hakoda, Kenji (2010) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane-strain small punch test. In: SPT Conference 2010, 1900-01-01.
Carus, D. (2010) The European project SMILING : self mobility improvement in the ederly by counteracting falls. In: 17th PRM European Congress, European Society of Physical and Rehabilitation Medicine, 2010-05-23 - 2010-05-27. (Unpublished)
Kelly, N.J. and Cockroft, J. and Ghauri, S. (2010) Performance analysis of air source heat pumps using detailed simulations and comparison to field trial data. In: e-Sim2010, International Building Performance Simulation Association Conference, 2010-05-19 - 2010-05-20.
Fico, Vincenzo and Emerson, David and Reese, Jason (2010) A new parallel compact TVD scheme for compressible flows employing domain decomposition. In: 22nd International Conference on Parallel Computational Fluid Dynamics, Parallel CFD 2010, 2010-05-17 - 2010-05-21.
Thomason, James L. and Ali, Jahan Z. and Anderson, John (2010) Effects of hydrolysis ageing on the performance and dimensional stability of glass-fiber reinforced polyamide 66. In: 68th Annual Technical Conference and Exhibition, ANTEC 2010, 2010-06-16 - 2010-06-20.
Phillips, Catriona and Kim, Hyo Wan and Brown, R.E. (2010) The flow physics of helicopter brownout. In: 66th American Helicopter Society Forum: Rising to New Heights in Vertical Lift Technology, 2010-05-11 - 2010-05-13.
Whitehouse, Glen R. and Boschitsch, Alexander H. and Smith, Marlyn J. and Lynch, C. Eric and Brown, Richard (2010) Investigation of mixed element hybrid grid-based CFD methods for rotorcraft flow analysis. In: 66th American Helicopter Society Forum: Rising to New Heights in Vertical Lift Technology, 2010-05-11 - 2010-05-13.
Greenshields, C.J. and Weller, H.G. and Gasparini, F. and Reese, J.M. (2010) Implementation of semi-discrete, non-staggered central schemes in a collated, polyhedral, finite volume framework, for high-speed viscous flows. International Journal of Numerical Methods for Heat and Fluid Flow, 63. pp. 1-21. ISSN 0961-5539
Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866
Baig, S. and McInnes, C.R. (2010) Light levitated geostationary cylindrical orbits are feasible. Journal of Guidance, Control and Dynamics, 33 (3). pp. 782-793. ISSN 1533-3884
Baker, T.N.; (2010) Laser surface modification of Ti alloys. In: Surface Engineering of Light Alloys - Aluminium, Magnesium and Titanium Alloys. Woodhead Publications, Cambridge, UK, pp. 398-443. ISBN 1845695372
Biggs, James D. and McInnes, Colin R. (2010) Passive orbit control for space-based geo-engineering. Journal of Guidance, Control and Dynamics, 33 (3). pp. 1017-1020. ISSN 1533-3884
Macdonald, M. and McInnes, C.R. and Hughes, G.W. (2010) Technology requirements of exploration beyond Neptune by solar sail propulsion. Journal of Spacecraft and Rockets, 47 (3). pp. 472-483. ISSN 0022-4650
Qin, Y. and Brockett, A. and Ma, Y. and Razali, A. and Zhao, J. and Harrison, C. and Pan, W. and Dai, X. and Loziak, D. (2010) Micro-manufacturing : research, technology outcomes and development issues. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 821-837. ISSN 1433-3015
Kim, Da Hye. and Yu, Dong Oh and Kwon, Oh Joon and Fletcher, Timothy M. and Scheurich, Frank and Brown, Richard (2010) Predicting unsteady blade loads of a wind turbine using RANS and vorticity transport methodologies. In: European Wind Energy Conference, 2010-04-20 - 2010-04-23.
Yu, Dong Oh and Kwon, Oh Joon and Fletcher, Timothy M. and Scheurich, Frank and Brown, Richard (2010) Prediction of unsteady blade loads of a wind turbine using RANS and vorticity transport methodologies. In: Annual Conference of the Korea Wind Energy Association, 2010-04-07 - 2010-04-09.
Macdonald, Malcolm (2010) Lossie Spaceport : The distance between dreams and reality. The Herald. p. 24. ISSN 0965-9439
Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2010) Elastic-driven instabilities in microfluidic flow focusing devices. In: European Rheology Conference, AERC 2010, 2010-04-06 - 2010-04-09.
Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Extensional flow of blood analogue solutions. In: European Rheology Conference, AERC 2010, 2010-04-06 - 2010-04-09.
Arlemark, Erik J. and Dadzie, S. Kokou and Reese, Jason M. (2010) An extension to the Navier-Stokes equations to incorporate gas molecular collisions with boundaries. Journal of Heat Transfer, 132 (4). 041006-1-041006-8. ISSN 0022-1481
Taylor, I. J. and Robertson, A.C. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M. (2010) New developments in rain-wind-induced vibrations of cables. Proceedings of the ICE - Structures and Buildings, 163 (2). pp. 73-86. ISSN 0965-0911
Boyle, James (2010) Some consequences of stress range dependent constitutive models in creep. In: IUTAM Symposium on Advanced Materials Modelling for Structures (STAMM), 2010-04-23 - 2010-04-23.
Clarke, J.A. and Johnstone, C.; Hall, M.R., ed. (2010) Assessing and benchmarking the performance of advanced building facades. In: Materials for Energy Efficiency and Comfort in Buildings. Woodhead Energy Series . Woodhead Publishing, Cambridge, pp. 484-502. ISBN 1845695267
Bennet, Derek J. and McInnes, C.R. (2010) Distributed control of multi-robot systems using bifurcating potential fields. Robots and Autonomous Systems, 58 (3). pp. 256-264. ISSN 0921-8890
Quail, Francis J. and Stickland, M.T. and Scanlon, T.J.; Korsunsky, A.M., ed. (2010) Numerical and experimental design study of a regenerative pump. In: Current Themes in Engineering Science. American Institute of Physics, pp. 165-180. ISBN 978-0-7354-0766-4
Clarke, Joseph Andrew and Ali, Sheikh (2010) A preliminary analysis of the tradability of future micro-grid networks. In: Control Methodologies and Technology for Energy Efficiency, CMTEE 2010, 2010-03-29 - 2010-03-31.
Tuohy, Paul Gerard and Roaf, Sue and Nicol, J. Fergus and Humphreys, Michael A. and Boerstra, Atze; (2010) Twenty-first century standards for thermal comfort : Low carbon building design and operation. In: Transforming the Markets in the Built Environment. Earthscan Publications Ltd. ISBN 9781849710886
McInnes, C R (2010) Space-based geoengineering: challenges and requirements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (3). pp. 571-580. ISSN 0954-4062
Gibbings, Alison and Vasile, Massimiliano and Zuiani, Federico and Novak, Daniel and Rizzi, Francesco and Martinez, Cesar (2010) European Student Moon Orbiter (ESMO) - Mission Overview : Presentation. In: ESA/ESTEC Systems Requirement Review Workshop, 2010-03-22 - 2010-03-26.
Croisard, Nicolas and Vasile, Massimiliano and Kemble, Stephen and Radice, Gianmarco (2010) Preliminary space mission design under uncertainty. Acta Astronautica, 66 (5-6). pp. 654-664. ISSN 0094-5765
Roaf, Sue and Nicol, J. Fergus and Humphreys, Michael A. and Tuohy, Paul Gerard and Boerstra, Atze (2010) Twentieth century standards for thermal comfort : Promoting high energy buildings. Architectural Science Review, 53 (1). pp. 65-77. ISSN 0003-8628
Tuohy, P.G. and Roaf, S. and Nicol, F. and Humphreys, M.A. and Boerstra, A. (2010) Twenty first century standards for thermal comfort : fostering low carbon building design and operation. Architectural Science Review, 53 (1). pp. 78-86. ISSN 0003-8628
Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2010) Analysis of some global optimization algorithms for space trajectory design. Journal of Spacecraft and Rockets, 47 (2). pp. 334-344. ISSN 0022-4650
Roaf, Sue and Nicol, J. Fergus and Humphreys, Michael A. and Tuohy, Paul Gerard and Boerstra, Atze; Raug, Sue, ed. (2010) Twentieth century standards for thermal comfort : High energy buildings. In: Transforming Markets in the Built Environment. Earthscan Publications Ltd. ISBN 9781849710886
Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) The importance of the radiotriquetral ligament for proximal row stability in the wrist : a finite element study. In: 9th International Symposium in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 2010-02-24 - 2010-02-27.
Abdulrahman, G.H. and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25.
Brown, Blair and McInnes, Colin (2010) A dynamical systems approach to micro spacecraft autonomy. In: 20th AAS/AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17.
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco; (2010) Exploiting distant periodic orbits and their invariant manifolds to design novel space trajectories to the Moon. In: Spaceflight Mechanics 2010. Advances in the Astronautical Sciences, 136 . Univelt Inc, San Diego, California, pp. 265-284. ISBN 978-0-87703-560-2
Simo, Jules and McInnes, Colin; Mortari, D. and Starchville, T.F. and Trask, A.J. and Miller, J.K., eds. (2010) On the stability of approximate displaced lunar orbits. In: Spaceflight mechanics 2010. Advances in the Astronautical Sciences . Univelt Inc, USA, pp. 1229-1238. ISBN 9780877035602
Simo, Jules and McInnes, Colin R. (2010) Displaced solar sail orbits : dynamics and applications. In: 20th AAS/AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17.
Stack, M.M. and Abdelrahman, S.M. and Jana, B.D. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. Wear, 268 (3-4). pp. 533-542. ISSN 0043-1648
Chen, Haofeng (2010) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. Journal of Pressure Vessel Technology, 132 (1). 011202. ISSN 0094-9930
Simo, Jules and McInnes, Colin R. (2010) On the stability of displaced two-body lunar orbits. In: 20th AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17.
Wu, J. and Shu, C. and Zhang, Y.H. (2010) Simulation of incompressible viscous flows around moving objects by a variant of immersed boundary-Lattice Boltzmann method. International Journal of Numerical Methods in Fluids, 62 (3). pp. 327-354. ISSN 0271-2091
Dadzie, S. Kokou and Reese, Jason M. (2010) A volume-based hydrodynamic approach to sound wave propagation in a monatomic gas. Physics of Fluids, 22. 016103. ISSN 1070-6631
Purandare, Y. P. and Ehiasarian, A.P. and Stack, M. M. and Hovsepian, P. Eh. (2010) CrN/NbN coatings deposited by HIPIMS : a preliminary study of erosion-corrosion performance. Surface and Coatings Technology, 204 (8). pp. 1158-1162. ISSN 0257-8972
McInnes, Colin R.; Badescu, Viorel, ed. (2010) Mars climate engineering using orbiting solar reflectors. In: Mars. Springer-Verlag, pp. 645-659. ISBN 978-3-642-03628-6
Sanchez Cuartielles, J.P. and Vasile, M. and Radice, G. (2010) Consequences of asteroid fragmentation during impact hazard mitigation. Journal of Guidance, Control and Dynamics, 33 (1). pp. 126-146. ISSN 1533-3884
Fico, Vincenzo and Emerson, David and Reese, Jason (2010) A high order compact scheme for hypersonic aerothermodynamics. In: 48th AIAA Aerospace Sciences Meeting, 2010-01-04 - 2010-01-07.
Fletcher, Timothy M. and Brown, R.E. (2010) Interaction of an Eulerian flue gas plume with wind turbines. In: 29th ASME Wind Energy Symposium, 2010-01-04 - 2010-01-07.
Li, H. and Johnston, R. and Mackenzie, D. (2010) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. Journal of Pressure Vessel Technology, 132 (1). 011205. ISSN 0094-9930
Scheurich, Frank and Fletcher, Timothy M. and Brown, R.E. (2010) The influence of blade curvature and helical blade twist on the performance of a vertical-axis wind turbine. In: 29th ASME Wind Energy Symposium, 2010-01-04 - 2010-01-07.
Kim, Hyo Won and Brown, Richard E. (2010) A comparison of coaxial and conventional rotor performance. Journal of the American Helicopter Society, 55 (1). 012004. ISSN 0002-8711
Robertson, A.C. and Taylor, I.J. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M. (2010) Numerical simulation of rivulet evolution on a horizontal cable subject to an external aerodynamic field. Journal of Fluids and Structures, 26 (1). pp. 50-73. ISSN 0889-9746
Simo, Jules and McInnes, Colin R. (2010) Designing displaced lunar orbits using low-thrust propulsion. Journal of Guidance, Control and Dynamics, 33 (1). pp. 259-265. ISSN 1533-3884
Boyle, James (2010) Research-teaching linkages : enhancing graduate attributes - engineering and the built environment. Quality Assurance Agency for Higher Education, Gloucester.
Stickland, M.T. and Scanlon, T.J. (2010) EU-NORSEWIND Investigation of flow distortion effects on offshore instrumentation. Journal of Wind Engineering and Industrial Aerodynamics. ISSN 0167-6105 (Unpublished)
Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2010) User Defined Function: lidar_3D : NORSEWInD Report UoSNW006. University of Strathclyde, Glasgow.
Ceriotti, M. (2010) Global optimisation of multiple gravity assist trajectories. PhD thesis, University of Glasgow.
Colombo, Camilla and Radice, Gianmarco and Vasile, Massimiliano (2010) Optimal trajectory design for interception and deflection of Near Earth Objects. PhD thesis, University of Glasgow.
Counsell, John and Scott, Alastair and Khalid, Yousaf Ali and Murphy, Gavin Bruce and Stewart, Matt John and Brindley, Joseph (2010) BRE Centre of Excellence in Energy Utilisation. BRE Trust Review (1st Ed). IHS BRE Press, Berkshire. ISBN 9781848061354
Kim, Ji-Yeon and Hong, Sung-Hee and Park, Hyo-Soon and Kim, Sung-Sil and Kim, Jae Min; (2010) A research on the application method for renewable energy complex system for school buildings. In: EKC 2009, Proceedings of the EU-Korea Conference on Science & Technology. Springer Proceedings in Physics, 135 . Springer-Verlag Berlin, Germany, pp. 61-72. ISBN 978-3-642-13623-8
Oh, Jin-Sook and Bae, Soo-Young and Lee, Li-Young and Kwak, Jun-Ho and Kim, Jae Min and Johnstone, Cameron; (2010) Wireless monitoring system for hybrid power generation system. In: Springer Proceedings in Physics. Springer Proceedings in Physics, 135 . Springer-Verlag Berlin, Berlin, pp. 91-98. ISBN 978-3-642-13623-8
Quail, Francis J. and Scanlon, T.J. and Stickland, M.T. (2010) Development of a regenerative pump impeller using rapid manufacturing techniques. Rapid Prototyping Journal, 16 (5). pp. 337-344. ISSN 1355-2546
Ritos, K. and Kotsalis, E. M. and Walther, J. H. and Ding, Y. and Praprotnik, M. and Koumoutsakos, P. (2010) Multiscale flow simulation of water past a fullerene. European Cells and Materials, 20 (Suppl.). p. 212. ISSN 1473-2262
Simo, Jules and McInnes, Colin; (2010) Displaced solar sail orbits : Dynamics and applications. In: Spaceflight Mechanics 2010. Advances in the Astronautical Sciences, 136 . Univelt Inc, San Diego, California, pp. 1803-1816. ISBN 978-0-87703-560-2
Vasile, Massimiliano and Croisard, Nicolas; (2010) Robust preliminary space mission design under uncertainty. In: Computational Intelligence in Expensive Optimization Problems. Adaptation Learning and Optimization, 2 . Springer-Verlag Berlin Heidelberg, Berlin, pp. 543-570. ISBN 978-3-642-10700-9
2009
Campobasso, M and Zanon, A and Minisci, Edmondo and Bonfiglioni, A (2009) Wake-tracking and turbulence modelling in computational aerodynamics of wind turbine aerofoils. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (8). pp. 939-951. ISSN 0957-6509
Badawy, Ahmed and McInnes, Colin R. (2009) Small spacecraft formation-flying using potential functions. Acta Astronautica, 65 (11-12). pp. 1783-1788. ISSN 0094-5765
Liu, Haihu and Zhang, Yonghao (2009) Lattice Boltzmann simulation of droplet behaviour in microfluidic devices. Houille Blanche, 6. pp. 84-92. ISSN 0018-6368
Simo, Jules and McInnes, Colin R. (2009) Solar sail orbits at the Earth-Moon libration points. Communications in Nonlinear Science and Numerical Simulation, 14 (12). pp. 4191-4196. ISSN 1007-5704
Vasile, Massimiliano (2009) A multi-mirror solution for the deflection of dangerous NEOs. Communications in Nonlinear Science and Numerical Simulation, 14 (12). pp. 4139-4152. ISSN 1007-5704
Woo, K. and Kim, Jae Min (2009) Development of BIM-based energy performance tool : Samsung energy performance (SEP). Journal of the Architectural Institute of Korea Planning and Design, 25 (12). pp. 113-120. ISSN 1226-9093
Li, L. and Polido Gomes, J.F. and Brown, J.G. and Uttamchandani, D.G. and Pan, W. and Weiland, D. and Begbie, M. and Lowrie, C. and Desmulliez, M.P.Y. (2009) Simultaneous determination of the Young's modulus and Poisson's ratio in micro/nano materials. Journal of Micromechanics and Microengineering, 19 (12). ISSN 0960-1317
Bulgheroni, M. and D'Amico, E. and Bar-Heim, S. and Carus, D. and Harrison, C.S. and Marcellini, F. (2009) The SMILING project : prevention of falls by a mechatronic training device. In: The 2nd IASTED International Conference on Telehealth and Assistive Technology, TAT 2009, 2009-11-02 - 2009-11-04. (Unpublished)
Biggs, James D. and McInnes, Colin R. (2009) Time-delayed feedback control in astrodynamics. Journal of Guidance, Control and Dynamics, 32 (6). pp. 1804-1811. ISSN 1533-3884
Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2009) Optimal low-thrust trajectories to asteroids through an algorithm based on differential dynamic programming. Celestial Mechanics and Dynamical Astronomy, 105 (75). pp. 75-112. ISSN 0923-2958
Mingotti, Giorgio and Topputo, Francesco and Bernelli-Zazzara, Franco (2009) Low-energy, low-thrust transfers to the Moon. Celestial Mechanics and Dynamical Astronomy, 105 (1-3). pp. 61-74. ISSN 0923-2958
Soulages, J. and Oliveira, Monica and Sousa, P.C. and Alves, M.A. and McKinley, G.H. (2009) Investigating the stability of viscoelastic stagnation flows in T-shaped microchannels. Journal of Non-Newtonian Fluid Mechanics, 163 (1-3). pp. 9-24. ISSN 0377-0257
Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J.; Au, F.T.K., ed. (2009) Practical application of CFD for wind loading on tall buildings. In: Proceedings of the 7th international conference on tall buildings. Research Publishing Services, Hong Kong, China, pp. 767-776. ISBN 9789628014194
Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J. (2009) Practical application of CFD for wind loading on tall buildings. In: 7th International Conference on Tall Buildings, 2009-10-29 - 2009-10-30, Hong Kong, China.
Kim, Hyo Wan and Brown, R.E. (2009) A rational approach to comparing the performance of coaxial and conventional rotors. Journal of the American Helicopter Society, 55 (1). 012003 1-9. ISSN 0002-8711
Kelly, Mary E. and Phillips, Catriona and Scheurich, Frank and Kim, Hyo Wan and Fletcher, Timothy M. and Brown, R.E. (2009) Applying rotorcraft modelling technology to renewable energy research. In: 2nd AHS/KSASS International Forum on Rotorcraft Multidiscipllinary Technology, 2009-10-19 - 2009-10-20.
Cerdeira, T. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Monteiro, F. and Imai, Y and Yamaguchi, Y.; (2009) Determination of the cell-freelayer in circular PDMS microchannels. In: Proceedings of VIPIMAGE-II ECCOMAS. UNSPECIFIED, Portugal, p. 357.
Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A.; (2009) Flow of a blood analogue solution through microfabricated hyperbolic contractions. In: Proceedings of VIPIMAGE-II ECCOMAS. UNSPECIFIED, PRT, p. 361.
Ceriotti, Matteo and Vasile, Massimiliano (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16.
Ceriotti, M. and Vasile, M. (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.
McKay, Robert and Macdonald, Malcolm and Bosquillon de Frescheville, Francois and Vasile, Massimiliano and McInnes, Colin and Biggs, James (2009) Non-Keplerian orbits using low thrust, high ISP propulsion systems. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16.
Poole, R.J. and Oliveira, Monica and Afonso, A.M. and Alves, M.A. and Pinho, F.T. and Rocha, G.N. and Oliveira, P.J. (2009) Purely-elastic instabilities in extensional flows. In: IMA workshop: Flowing Complex Fluids: Fluid Mechanics-Interaction of Microstructure and Flow, 2009-10-12 - 2009-10-16.
Simo, Jules and McInnes, Colin R. (2009) Analysis and control of displaced periodic orbits in the Earth-Moon system. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16.
Gislason, Magnus K. and Nash, D.H. and Nicol, A.C. and Kanellopoulos, A. and Bransby-Zachary, M. and Hems, T. and Condon, B. and Stansfield, B. (2009) A three-dimensional finite element model of maximal grip loading in the human wrist. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223 (7). pp. 849-861. ISSN 0954-4119
Alexander, L.A. and Wood, J. (2009) A study of the low-cycle fatigue failure of a galvanised steel lighting column. Engineering Failure Analysis, 16 (7). pp. 2153-2162. ISSN 1350-6307
Clarke, J.A. and Yaneske, P.P. (2009) A rational approach to the harmonisation of the thermal properties of building materials. Building and Environment, 44 (10). pp. 2046-2055. ISSN 0360-1323
Reese, Jason M. and Zhang, Yonghao (2009) Simulating fluid flows in micro and nano devices : the challenge of non-equilibrium behaviour. Journal of Computational and Theoretical Nanoscience, 6 (10). pp. 2061-2074. ISSN 1546-1955
Ceriotti, M. and Vasile, M. (2009) Automatic MGA trajectory planning with a modified ant colony optimization algorithm. In: 21st International Space Flight Dynamics Symposium, ISSFD 2009, 2009-09-28 - 2009-10-02.
Kelly, Mary E. and Brown, R.E. (2009) The effect of blade aerodynamic modelling on the prediction of the blade airloads and the acoustic signature of the HART II rotor. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25.
Phillips, Catriona and Kim, Hyo Wan and Brown, R.E. (2009) The effect of rotor design on the fluid dynamics of helicopter brownout. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25.
Smith, Marilyn J. and Shenoy, Rajiv and Kenyon, Adam R. and Brown, Richard (2009) Vorticity-transport and unstructured RANS investigation of rotor-fuselage interactions. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25.
Nash, D H and Hitchen, J (2009) Effects of local reinforcement on nozzles in dished ends. In: 12th International Conference on Pressure Vessel Technology, ICPVT-12, 2009-09-20 - 2009-09-23.
Correia, Antónia and Cavadas, A. and Afonso, A.M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2009) Numerical investigation of laminar flow in symmetric and asymmetric complex T-channels for micro-mixing. In: III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia, 2009-09-17 - 2009-09-18.
Sousa, P.C. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Design of an efficient microfluidic rectifier for viscoelastic fluid flow. In: III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia, 2009-09-17 - 2009-09-18.
Oldroyd, Andrew and Stickland, M.T. and Hasager, C.B. and Mikkelsen, Torben and Estanqueiro, A. (2009) EU-Norsewind: delivering offshore wind speed data. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16.
Stickland, M.T. and Scanlon, T.J. and Fabre, S. and Oldroyd, Andrew and Mikkelsen, Torben (2009) EU-Norsewind : Investigation of flow distortion effects on offshore instrumentation. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16.
Stickland, M.T. and Scanlon, T.J. and Fabre, S. and Oldroyd, Andrew and Mikkelsen, Torben (2009) EU-Norsewind: assessment of viability of open source CFD code for the wind industry. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16.
Scanlon, T.J. and Roohi, E. and Reese, J.M. (2009) Trials of an open source DSMC code. In: Direct Simulation Monte Carlo: Theory, Methods and Applications Conference, DSMC-09, 2009-09-13 - 2009-09-16. (Unpublished)
Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2009) Knudsen layer effect on thermal transpiration of rarefied gases. In: 1st GASMEMS Summer School & Workshop, GASMEMS 09, 2009-09-09 - 2009-09-11.
Abid, Muhammad and Nash, David (2009) Design optimization and analysis techniques. VDM Verlag, Saarbrücken, Germany. ISBN 9783639197334, 363919733X
Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie (2009) Contra-rotating marine current turbines : single point tethered floating system - stabilty and performance. In: 8th European Wave and Tidal Energy Conference, EWTEC 2009, 2009-09-07 - 2009-09-10.
McCombes, Tom and Johnstone, Cameron and Grant, Andrew (2009) Unsteady 3D wake modelling for marine current turbines. In: 8th European Wave and Tidal Energy Conference, EWTEC 2009, 2009-09-07 - 2009-09-10.
Stack, M.M. and Abdulrahman, S. M. and Jana, B. D. (2009) A map and a pipe : a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling. In: EuroCorr 2009, 2009-09-06 - 2009-09-10.
Reese, Jason and Lockerby, Duncan A. and Emerson, David (2009) Gas dynamics at the micro-scale : a review of progress in hydrodynamic modelling. In: 2nd Micro and Nano Flows Conference, MNF2009, 2009-09-01 - 2009-09-02. (Unpublished)
Trendafilova, I. and Kazandjiev, R. (2009) Smart materials for intelligent structural health monitoring. In: 11th National Congress on Theoretical and Applied Mechanics, NCTAM 2009, 2009-09-02 - 2009-09-05.
Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836
Ozdemir, Pinar and Mohr, S. and Wang, Changhai and Stickland, Matthew and Goddard, N.J. and Fielden, P.R. and Zhang, Yonghao (2009) Self-organised droplet flow patterns in microchannels. In: 2nd Micro and Nano Flows Conference 2009, 2009-09-01 - 2009-09-02.
Lima, Rui and Oliveira, Monica and Ishikawa, T. and Kaji, H. and Tanaka, S. and Nishizawa, M. and Yamaguchi, T. (2009) Axisymmetric polydimethysiloxane microchannels for in vitro hemodynamic studies. Biofabrication, 1 (3). 035005. ISSN 1758-5082
Simo, Jules and McInnes, Colin R. (2009) Asymptotic analysis of displaced lunar orbits. Journal of Guidance, Control and Dynamics, 32 (5). pp. 1666-1671. ISSN 1533-3884
Wu, Zhangming and Wright, Mike T. and Ma, Xianghong; (2009) Theoretical modelling and experimental validation of fluid-loaded micro rectangular plates. In: Peoceedings of the ASME 2009 IDETC. UNSPECIFIED, USA, pp. 671-679.
Counsell, John and Khalid, Yousaf Ali (2009) An holistic approach to assess the design and simulation of intelligent building control systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15.
Suzuki, Masayuki and Uchiyama, Kenji and Bennet, Derek J. and McInnes, Colin R. (2009) Three-dimensional formation flying using bifurcating potential fields. In: AIAA Guidance, Navigation and Control Conference, 2009-08-10 - 2009-08-13.
Counsell, John M. and Khalid, Yousaf A. (2009) A holistic analysis method to assess the controllability of commercial buildings and their systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15.
Liu, Haihu and Zhang, Yonghao (2009) Droplet formation in a T-shaped microfluidic junction. Journal of Applied Physics, 106 (3). 034906. ISSN 0021-8979
Vasile, Massimiliano and Locatelli, Marco (2009) A hybrid multiagent approach for global trajectory optimization. Journal of Global Optimization, 44 (4). pp. 461-479. ISSN 0925-5001
Baig, Shahid and McInnes, Colin R. (2009) Artificial halo orbits for low-thrust propulsion spacecraft. Celestial Mechanics and Dynamical Astronomy, 104 (4). pp. 321-335. ISSN 0923-2958
Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2009) Semi-analytical solution for the optimal low-thrust deflection of near-Earth objects. Journal of Guidance, Control and Dynamics, 32 (3). pp. 796-809. ISSN 1533-3884
Counsell, John M. and Brindley, Joseph and Macdonald, Malcolm (2009) Non-linear autopilot design using the philosophy of variable transient response. In: AIAA Guidance, Navigation and Control Conference, 2009-08-10 - 2009-08-13.
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2009) Three-dimensional flow of Newtonian and Boger fluids in square-square contractions. Journal of Non-Newtonian Fluid Mechanics, 160 (2-3). pp. 122-139. ISSN 0377-0257
Chen, Haofeng and Ponter, Alan R.S. (2009) Structural integrity assessment of superheater outlet penetration tubeplate. International Journal of Pressure Vessels and Piping, 86 (7). pp. 412-419. ISSN 0308-0161
Hosseini-Toudeshky, H. and Jalalvand, M. and Mohammadi, B. (2009) Delamination analysis of holed composite laminates using interface elements. Procedia Engineering, 1 (1). pp. 39-42. ISSN 1877-7058
Kummert, M. and Dempster, W.M. and McLean, Kenneth (2009) Transient thermal analysis of a data centre cooling system under fault conditions. In: 11th International Building Performance Simulation association Conference and Exhibition, Building Simulation 2009, 2009-07-27 - 2009-07-30. (Unpublished)
Yang, L. and Thomason, J.L. (2009) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microdebond methods. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31.
Clarke, Joseph Andrew and Ghauri, Sabeeta and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2009) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.
Clarke, Joseph Andrew and Humphreys, Michael A. and Nicol, J. Fergus and Rijal, Hom B. and Tuohy, Paul Gerard (2009) The thermal simulation of an office building implementing a new behavioural algorithm for window opening and the use of ceiling fans. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Cockroft, Jeremy and Ghauri, Sabeeta and Samuel, Aizaz Aamir and Tuohy, Paul Gerard (2009) Complex energy simlulation using simplified user interaction mechanisms. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Cockroft, Jeremy and Kennedy, D. and O'Hara, Martin and Samuel, Aizaz Aamir and Strachan, Paul and Tuohy, Paul Gerard (2009) Development and validation of detailed building, plant and controller modelling to demonstrate interactive behaviour of system components. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.
David-West, O.S. and Nash, D.H. and Banks, W.M. (2009) Impact characterisation of doubly curved composite structure. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31. (Unpublished)
Donn, M.R. and Crawley, Drury B. and Hand, Jon and Marsh, A. (2009) The provenances of your simulation data. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Frontini, Francesco and Kuhn, Tilman E. and Heikel, Sebastian and Strachan, Paul and Kokogiannakis, Georgios (2009) Implementation of a new bi-directional solar modelling method for complex facades within the ESP-r building simulation program. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.
Ghauri, Sabeeta and Hand, Jon and Johnstone, Cameron and Kim, Jae Min and Kokogiannakis, Georgios and Tuohy, Paul Gerard and Woo, K-H. (2009) Adoption of dynamic simulation for an energy performance rating tool for Korean residential buildings : EDEM-SAMSUNG. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Murphy, Gavin Bruce and Kummert, Michael and Anderson, B.R. and Counsell, John (2009) A comparison of the UK Standard Assessment Procedure (SAP) and detailed simulation of building-integrated renewable energy systems. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Novak, J. and Pearce, C.J and Grassl, P. and Yang, Liu and Thomason, James (2009) Analysis of the microbond test using nonlinear fracture mechanics. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31.
Prazeres, L. and Kim, Jae Min and Hand, Jon (2009) Improving communication in building simulation supported projects. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.
Thomason, J.L. (2009) Why are natural fibres failing to deliver on composite performance? In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31.
Tuohy, Paul Gerard (2009) Simulation and BIM in building design, commissioning and operation: a comparison with the microelectronics industry. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Wang, C.C. and Thomason, James and Jones, F.R. (2009) The role of the thermal induced residual stresses in a single fibre thermoplastic model composite. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31.
Waseem, Y. and Kelly, N.J. and Scanlon, T.J. and Hall, Neil (2009) A methodology and toolkit for the assessment and selection of LZC technologies in the building design process. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.
Chen, Haofeng (2009) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30.
Muscat, Martin and Degiorgio, Kevin and Wood, James (2009) Comparison between different approaches for the evaluation of the hot spot structural stress in welded pressure vessel components. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30.
Manoach, Emil and Trendafilova, Irina (2009) Damage detections in nonlinear vibrating thermally loaded plates. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23.
Kennedy, Johnathan J. and Lamond, Andrew and Stickland, M.T. (2009) Research into the installation and optimisation of turning vanes and drag reduction technology applied to the Landrover Discovery MK3 vehicle. In: 4th European Automotive Simulation Conference (EASC), 2009-07-06 - 2009-07-07.
Lamond, Andrew D. and Kennedy, Johnathan J. and Stickland, Matthew (2009) An investigation into unsteady base bleed for drag reduction in bluff two-box SUVs. In: 4th European Automotive Simulation Conference, EASC 2009, 2009-07-06 - 2009-07-07.
Le, N.P.T. and Greenshields, C.J. and Reese, J.M. (2009) Numerical investigation of slip velocity and temperature jump boundary conditions in rarefied hypersonic flow. In: 3rd European Conference on Aero-Space Sciences, 2009-07-06 - 2009-07-09.
Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2009) Loading on the Scapho-Trapezium-Trapezoid joint during gripping. In: 22nd Congress of the International Society of Biomechanics, 2009-07-05 - 2009-07-09.
Maddock, Christie and Vasile, Massimiliano and Summerer, Leopold (2009) Conceptual design of a multi-mirror system for asteroid deflection. In: 27th International Symposium on Space Technology and Science, 2009-07-05 - 2009-07-12.
Ahlin, G.A. and Brown, R.E. (2009) Wake structure and kinematics in the vortex ring state. Journal of the American Helicopter Society, 54 (3). 032003. ISSN 0002-8711
Bennet, D. J. and McInnes, C.R. (2009) Verifiable control of a swarm of unmanned aerial vehicles. Journal of Aerospace Engineering, 223 (7). pp. 939-953. ISSN 0893-1321
Quail, F. and Stickland, M.T. and Scanlon, T.J. (2009) Rapid manufacturing technique used in the development of a regenerative pump impeller. In: World Congress on Engineering, 2009-07-01 - 2009-07-03.
Quail, Francis and Stickland, Matthew and Scanlon, Thomas; Ao, S.I. and Gelman, L and Hukins, D.W.L. and Hunter, A. and Korsunsky, A.M., eds. (2009) Rapid manufacturing technique used in the development of a regenerative pump impeller. In: World congress on engineering 2009. Lecture Notes in Engineering and Computer Science, I . International Association of Engineers, GBR, pp. 1730-1736. ISBN 978-988-17012-5-1
Tuohy, Paul (2009) Regulations and robust low-carbon buildings. Building Research and Information, 37 (4). pp. 433-445. ISSN 1466-4321
Biggs, James and Holderbaum, William (2009) Optimal kinematic control of an autonomous underwater vehicle. IEEE Transactions on Automatic Control, 54 (7). pp. 1623-1626. ISSN 0018-9286
Holderbaum, William and Biggs, James (2009) Oriented vehicles travelling in spherical space. In: The 11th IASTED International Conference on Control and its Applications, 2009-07-13 - 2009-07-15.
Madhlopa, A. and Johnstone, C. (2009) Numerical study of a passive solar still with separate condenser. Renewable Energy, 34 (7). pp. 1668-1677. ISSN 0960-1481
Oliveira, Monica and Pinho, F.T. and Poole, R.J. and Oliveira, P.J. and Alves, M.A. (2009) Purely elastic flow asymmetries in flow-focusing devices. Journal of Non-Newtonian Fluid Mechanics, 160 (1). pp. 31-39. ISSN 0377-0257
Phillips, C. and Brown, R.E. (2009) Eulerian simulation of the fluid dynamics of helicopter brownout. Journal of Aircraft, 46 (4). pp. 1416-1429. ISSN 0021-8669
Trendafilova, I. and Gorman, D. G. and Manoach, E. (2009) An investigation on vibration-based damage detection in circular plates. Structural Health Monitoring, 8 (4). pp. 291-302. ISSN 1475-9217
Williams, J.G. and Anley, R.E. and Nash, D.H. and Gray, T.G.F. (2009) Analysis of externally loaded bolted joints : analytical, computational and experimental study. International Journal of Pressure Vessels and Piping, 86 (7). pp. 420-427. ISSN 0308-0161
Ye, Z. and Tirovic, M. and Davies, M. and Baker, P.H. and Phillipson, M.C. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C. (2009) The testing of two methods for the moisture measurement of building fabrics via comparisons with data from an x-ray system. Building and Environment, 44 (7). pp. 1409-1417. ISSN 0360-1323
Alves, M.A. and Sousa, P.C. and Soulages, J. and McKinley, G.H. and Oliveira, Monica (2009) Purely-elastic flow asymetries in T-shaped microchannels. In: Congreso de Métodos Numéricos en Ingeniería, 2009-06-29 - 2009-07-02.
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Flow of a Newtonian and a shear-thinning viscoelastic fluid through 3D contractions : Experiments and simulations. In: Congreso de Métodos Numéricos en Ingeniería, 2009-06-29 - 2009-07-02.
Arlemark, E.J. and Reese, J.M. (2009) Investigating the effect of solid boundaries on the gas molecular mean-free-path. In: 7th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2009, 2009-06-22 - 2009-06-24.
Beveridge, A. J. and Wheel, M. A. and Nash, D. H. (2009) Computational modelling and experimental characterisation of heterogeneous materials. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23.
Biggs, James and McInnes, Colin R. (2009) An optimal gains matrix for time-delay feedback control. In: 2nd IFAC Conference on the Analysis and Control of Chaotic Systems (CHAOS 09), 2009-06-22 - 2009-06-24.
Mackenzie, D. and Li, Hongjun and Hamilton, R. (2009) Multi-physics simulation of friction stir welding process. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19.
Wood, James and Alexander, Louise A. and Taylor, Ian (2009) An experimental and finite element study of the low-cycle fatigue failure of a galvanised steel lighting column. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19.
Clarke, J.A. and Conno, G. and Grant, A.D. and Johnstone, C. (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, 2009-05-31 - 2009-06-05, Hawaii, USA.
Clarke, J.A. and Connor, Gary and Grant, A.D. and Johnstone, C.; (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: OMAE 2009. American Society of Mechanical Engineers, New York, pp. 1065-1073. ISBN 9780791843444
Clarke, J.A. and Johnstone, C. and Kim, J.M. and Tuohy, P.G. (2009) Energy, carbon and cost performance of building stocks : upgrade analysis, energy labelling and national policy development. Advances in Building Energy Research, 3 (1). pp. 1-20. ISSN 1751-2549
Biggs, James and McInnes, Colin (2009) Solar sail formation flying for deep-space remote sensing. Journal of Spacecraft and Rockets, 46 (3). pp. 670-678. ISSN 0022-4650
Madhlopa, A. and Johnstone, C. (2009) Model for computation of solar fraction in a single-slope solar still. Solar Energy, 83 (6). pp. 873-882. ISSN 0038-092X
Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, 2009-05-31 - 2009-06-05.
Stack, Margaret and Abdelrahman, Shehab (2009) Some reflections on a model to predict the erosion rate of the passive film on pure metals. In: 13th International Conference on Aerospace Science and Aviation Technology, ASAT 2009, 2009-05-26 - 2009-05-28.
Thomason, J.L. and Ali, J.Z. (2009) The dimensional stability of glass-fibre reinforced Polyamide 66 during hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 40 (5). pp. 625-634. ISSN 1359-835X
Fletcher, Timothy M. and Duraisamy, Karthikeyan and Brown, Richard (2009) Sensitivity of tail rotor noise to helicopter configuration in forward flight. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29.
Kelly, Mary E. and Brown, Richard (2009) The effect of blade aerodynamic modelling on the prediction of high-frequency rotor airloads. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29.
Kim, Hyo Wan and Duraisamy, Karthikeyan and Brown, Richard (2009) Effect of rotor stiffness and lift offset on the aeroacoustics of a coaxial rotor in level flight. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29.
Croisard, Nicolas and Vasile, Massimiliano; (2009) System engineering design optimisation under uncertainty for preliminary space mission. In: 2009 IEEE Congress on Evolutionary Computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE, NOR, pp. 324-331. ISBN 978-1-4244-2958-5
Minisci, Edmondo and Avanzini, Giulio; (2009) Orbit transfer maneouvres as a test benchmark for comparison metrics of evolutionary algorithms. In: IEEE Congress on Evolutionary Computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE, NOR, pp. 350-357.
Rahman, M. and Lim, J. and Hamilton, Robert and Comlekci, Tugrul (2009) Dynamic behaviour of portal frames at elevated temperature. In: Simulea Customer Conference, 2009-05-18 - 2009-05-21.
Vasile, Massimiliano and Minisci, Edmondo and Locatelli, M; (2009) A dynamical system perspective on evolutionary heuristics applied to space trajectory optimization problems. In: 2009 IEEE Congress on evolutionary computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE, NOR, pp. 2340-2347. ISBN 9781424429585
Simo, J. and McInnes, C.R. (2009) Stabilization of displaced periodic orbits in the solar sail restricted three-body system. In: SIAM Conference on Applications of Dynamical Systems, 2009-05-17 - 2009-05-21.
Lockerby, D.A. and Reese, J.M. and Struchtrup, H. (2009) Switching criteria for hybrid rarefied gas flow solvers. Proceedings A: Mathematical, Physical and Engineering Sciences, 465 (2105). pp. 1581-1598. ISSN 1471-2962
Pan, W. and Boyle, J. and Mackenzie, D. (2009) Simulation of the small punch creep test with consideration of variation of material properties. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08.
Gislason, M.K. and Stansfield, B.W. and Nash, D.H. and Hems, Tim and Bransby-Zachary, Marc (2009) Ulnar variance and load transfer in the forearm during maximal grip: a finite element study. In: Combined Scientific Meeting of the British and American Societies of Surgery of the Hand, 2009-04-30 - 2009-05-02.
Mclaren, Andrew (2009) Approaches to the teaching of design : an engineering subject centre guide. Higher Education Academy, Loughborough University, Leicester. ISBN 978-1-904804-802
Yun, Geun Young and Tuohy, P.G. and Steemers, K. (2009) Thermal performance of a naturally ventilated building using a combined algorithm of probabilistic occupant behaviour and deterministic heat and mass balance models. Energy and Buildings, 41 (5). pp. 489-499. ISSN 0378-7788
Zhang, Yonghao and Ozdemir, Pinar (2009) Microfluidic DNA amplification - a review. Analytica Chimica Acta, 638 (2). pp. 115-125. ISSN 0003-2670
Symington, Mark C. and Banks, W.M. and Opukuro, David West and Pethrick, R.A. (2009) Tensile testing of cellulose based natural fibers for structural composite applications. Composites Part A: Applied Science and Manufacturing, 43 (9). pp. 1083-1108. ISSN 1359-835X
Maddock, Christie and Vasile, M. and McInnes, C.R. and Radice, Gianmarco and Summerer, Leopold (2009) Designs of multi-spacecraft swarms for the deflection of apophis by solar sublimation. In: 1st IAA Planetary Defence Conference: Protecting Earth from Asteroids, 2009-04-27 - 2009-04-30.
Borggrafe, Andreas and Quatmann, Michael and Nölke, Daniel (2009) Radiation protective structures on the base of a case study for a manned Mars mission. Acta Astronautica, 65 (9-10). pp. 1292-1305. ISSN 0094-5765
Sousa, P.C. and Oliveira, Monica and Alves, M.A. (2009) Microfluidic rectifiers for viscoelastic fluid flow. In: 5th Annual European Rheology Conference, 2009-04-15 - 2009-04-17.
Sousa, P.C. and Pinho, I.S. and Abreu, A.R. and Gomes, L.F. and Santos, R.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Flow of a blood analogue solution in a micro-geometry with a constriction. In: 5th Annual European Rheology Conference, 2009-04-15 - 2009-04-17.
Thomason, J.L. (2009) A physical approach to interfacial strength in natural fibre reinforced composites. In: 10th Deformation and Fracture of Composites (DFC 10) Conference, 2009-04-15 - 2009-04-17. (Unpublished)
Yang, Liu and Thomason, James (2009) A comparison of glass fibre-polypropylene interface strength measured using the fibre pull-out and microdebond methods. In: 10th Deformation and Fracture of Composites (DFC 10) Conference, 2009-04-15 - 2009-04-17. (Unpublished)
Abid, Muhammad and Nash, David (2009) Stamina of a non-gasketed flange joint under combined internal pressure, axial and bending loading : an experimental study. Journal of Pressure Vessel Technology, 131 (3). 031203-031210. ISSN 0094-9930
Beveridge, A. J. and Wheel, M. A. (2009) A control volume based formulation of the discrete Kirchoff triangular thin plate bending element. In: The 17th UK National Conference on Computational Mechanics in Engineering, 2009-04-06 - 2009-04-08.
Novak, J. and Pearce, C.J and Grassl, P. and Thomason, James and Yang, Liu (2009) Three-dimensional nonlinear finite element analysis of the microbond test. In: The 17th UK National Conference on Computational Mechanics in Engineering, 2009-04-06 - 2009-04-08.
Wu, Zhangming and Ma, Xianghong and Brett, Peter N. and Xu, Jinwu (2009) Vibration analysis of submerged micro rectangular plates with distributed mass loading. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465 (2014). 1323–1336. ISSN 1471-2962
Liu, X.M. and Thomason, J.L. and Jones, F.R.; (2009) XPS and AFM study of the structure of hydrolysed aminosilane on e-glass surfaces. In: Silanes and Other Coupling Agents. Brill Academic Publishers. ISBN 9789004165915
Liu, X.M. and Thomason, J.L. and Jones, F.R.; (2009) The concentration of hydroxyl groups on glass surfaces and their effect on the structure of silane deposits. In: Silanes and Other Coupling Agents. Brill Academic Publishers. ISBN 9789004165915
Quail, Francis and Scanlon, Thomas and Stickland, Matthew (2009) Study of a regenerative pump using numerical and experimental techniques. In: 8th European Turbomachinery Conference, 2009-03-23 - 2009-03-27.
Fletcher, Timothy M. and Brown, Richard and Kim, Da Hye and Kwon, Oh Joon (2009) Predicting wind turbine blade loads using vorticity transport and RANS methodologies. In: European Wind Energy Conference and Exhibition, EWEC 2009, 2009-03-16 - 2009-03-19.
Oldroyd, Andrew and Stickland, M.T. and Hasager, C.B. and Estanqueiro, A. and Mikkelsen, Torben (2009) Introducing EC FP7 Programme NORSEWInD-Northern Seas Index Database. In: European Wind Energy Conference and Exhibition, EWEC 2009, 2009-03-16 - 2009-03-19.
Carnelli, L. and Dachwald, Bernd and Vasile, Massimiliano (2009) Evolutionary neurocontrol: A novel method for low-thrust gravity-assist trajectory optimization. Journal of Guidance, Control and Dynamics, 32 (2). pp. 616-625. ISSN 1533-3884
Ferguson, A. and Kelly, N.J. and Weber, Andreas and Griffith, Brent (2009) Modelling residential-scale combustion-based cogeneration in building simulation. Journal of Building Performance Simulation, 2 (1). pp. 1-14. ISSN 1940-1493
Macpherson, G.B. and Nordin, N. and Weller, H.G. (2009) Particle tracking in unstructured, arbitrary polyhedral meshes for use in CFD and molecular dynamics. Communications in Numerical Methods in Engineering, 25 (3). pp. 263-273. ISSN 1069-8299
Ceriotti, Matteo and Vasile, Massimiliano and Giardini, Giovanni and Massari, Mauro (2009) An approach to model interest for planetary rover through Dezert-Smarandache Theory. Journal of Aerospace Computing, Information, and Communication, 6 (2). pp. 92-108. ISSN 1542-9423
Kokogiannakis, Georgios (2009) Support for the integration of simulation in the European Energy Performance of Buildings Directive. PhD thesis, University Of Strathclyde.
Simo, Jules and McInnes, Colin; (2009) Displaced periodic orbits with low-thrust propulsion in the Earth-Moon system. In: Spaceflight Mechanics. Advances in Astronautical Sciences, 134 . Univelt Inc, pp. 815-828. ISBN 978-0-87703-554-1
Hughes, Ben Richard and Abdul Ghani, S. A.A. (2009) A numerical investigation into the effect of windvent dampers on operating conditions. Building and Environment, 44 (2). pp. 237-248. ISSN 0360-1323
Thomason, J.L. (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 114-124. ISSN 1359-835X
Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Infield, David and Jardine, C. and Kelly, Nicolas and Leach, M. and Matian, M. and Peacock, A.D. and Staffell, I. and Sudtharalingam, S. and Woodman, B. (2009) UK Microgeneration. Part 1 : Policy and behavioural aspects. Proceedings of the ICE - Energy, 162 (1). pp. 23-36. ISSN 1751-4231
Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). 011203. ISSN 0094-9930
Kim, Hyo Wan and Kenyon, Adam R. and Duraisamy, Karthikeyan and Brown, Richard (2009) Interactional aerodynamics and acoustics of a hingeless coaxial helicopter with an auxiliary propeller in forward flight. Aeronautical Journal, 113 (1140). pp. 65-78. ISSN 0001-9240
Schütze, Oliver and Vasile, Massimiliano and Junge, Oliver and Delinitz, M. and Izzo, Dario (2009) Designing optimal low-thrust gravity-assist trajectories using space-pruning and a multi-objective approach. Engineering Optimization, 41 (2). pp. 155-181. ISSN 0305-215X
Simo, Jules and McInnes, Colin R. (2009) Displaced periodic orbits with low-thrust propulsion. In: 19th AAS/AIAA Space Flight Mechanics Meeting, 2009-02-08 - 2009-02-12.
Tang, G.H. and Zhang, Y. H. and Gu, X.J. and Barber, R. W. and Emerson, D. R. (2009) Lattice Boltzmann model for thermal transpiration. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 79 (2). 027701. ISSN 2470-0053
Yu, J. and Rossi, R. and Hale, C. and Goulding, D. and Dougan, G. (2009) Interaction of enteric bacterial pathogens with murine embryonic stem cells. Infection and Immunity, 77 (2). pp. 585-597. ISSN 0019-9567
Tang, G.H. and Zhang, Yonghao and Barber, Robert W. and Gu, X.J. and Emerson, David (2009) Modelling viscous fluid damping in oscillating microstructures. Modern Physics Letters B, 23 (3). pp. 241-244. ISSN 0217-9849
Fletcher, Timothy M. and Brown, R.E. (2009) Simulating wind turbine interactions using the vorticity transport equations. In: 28th ASME Wind Energy Symposium, 2009-01-05 - 2009-01-08.
Sanchez, Pau and Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2009) Multi-criteria comparison among several mitigation strategies for dangerous near Earth objects. Journal of Guidance, Control and Dynamics, 32 (1). pp. 121-142. ISSN 1533-3884
Biggs, James D. and McInnes, Colin R. and Waters, Thomas (2009) Control of solar sail periodic orbits in the elliptic three-body problem. Journal of Guidance, Control and Dynamics, 32 (1). pp. 318-320. ISSN 1533-3884
Kenyon, A.R. and Brown, R.E. (2009) Wake dynamics and rotor-fuselage aerodynamic interactions. Journal of the American Helicopter Society, 54 (1). 12003-1-12003-18. ISSN 0002-8711
Malinowski, P. and Wandowski, T. and Trendafilova, I. and Ostachowicz, W.M. (2009) A phased array-based method for damage detection and localization in thin plates. Structural Health Monitoring, 8 (1). pp. 5-15. ISSN 1475-9217
Portugues, I. and Moore, P.J. and Glover, I.A. and Johnstone, C. and McKosky, GM and Goff, M.B. and van de Zel, L. (2009) RF-based partial discharge early warning system for air-insulated substations. IEEE Transactions on Power Delivery, 24 (1). pp. 20-29. ISSN 0885-8977
Taylor, I.J. and Vezza, M. (2009) A numerical investigation into the aerodynamic characteristics and aeroelastic stability of a footbridge. Journal of Fluids and Structures, 25 (1). pp. 155-177. ISSN 0889-9746
Trendafilova, I.N. (2009) A review of the paper 'Some insights into the dynamics of defective structures' by J. A. Brandon. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (1). pp. 157-174. ISSN 0954-4062
Tuohy, P.G. and Humphreys, M.A. and Nicol, F. and Rijal, H.B. and Clarke, J.A. (2009) Occupant behaviour in naturally ventilated and hybrid buildings. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 115 (1). pp. 16-27. ISSN 0001-2505
Vasile, Massimiliano and Campagnola, Stefano (2009) Design of low-thrust gravity assist trajectories to Europa. JBIS, Journal of the British Interplanetary Society, 62 (1). pp. 15-31. ISSN 0007-084X
Baker, P.H. and Galbraith, G.H. and McLean, R.C. (2009) Temperature gradient effects on moisture transport in porous building materials. Building Services Engineering Research and Technology, 30 (1). pp. 37-48. ISSN 0143-6244
Counsell, John M. and Haughton-Brown, Chris and Tuff, Simon (2009) Renewable power for lean desktops in media applications. In: IBC 2009 Conference, 2009-09-10 - 2009-09-15.
Lee, E.J. and Pae, M.H. and Kim, D.H. and Kim, Jae Min and Kim, J.Y.; (2009) Literature review of technologies and energy feedback measures impacting on the reduction of building energy consumption. In: Proceedings of EU-Korea Conference on Science and Technology. Proceedings in Physics, 124 . Springer, pp. 223-228. ISBN 978-3-540-85189-9
Rahman, Mahbubur and Lim, James and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David and Xu, Yixiang; (2009) An investigation of overturning moments of portal frames at elevated temperatures. In: Proceedings of International Conference Applications of Structural Fire Engineering. EuroFire Engineering. ISBN 978-80-01-04266-3
Stack, M.M. (2009) Tribology matters. UK Power and Process Engineering (1). p. 33.
Vasile, M. and Ceriotti, M.; (2009) Automatic goal allocation for a planetary rover with DSmT. In: Advances and Applications of DSmT for Information Fusion (Collected Works). American Research Press, FIZ Karlsruhe GmbH, pp. 387-409. ISBN 978-1-59973-073-8
Vasile, Massimiliano; (2009) Hybrid behavioural-based multi-objective space trajectory optimization. In: Multi-Objective Memetic Algorithms. Studies in Computational Intelligence, 171 . Springer Berlin Heidelberg, pp. 231-253. ISBN 978-3-540-88050-9
Vasile, Massimiliano (2009) A memetic multi-agent collaboration search for space trajectory optimization. International Journal of Bio-inspired Computation, 1 (3). pp. 186-197. ISSN 1758-0366
Vasile, Massimiliano and Minisci, Edmondo; (2009) Memetic strategies for global trajectory optimisation. In: Advances in Computation and Intelligence. Lecture Notes in Computer Science, 5821 . Springer-Verlag Berlin, Berlin, pp. 180-190. ISBN 978-3-642-04842-5
2008
Kokogiannakis, Georgios and Strachan, Paul and Clarke, Joe (2008) Comparison of the simplified methods of the ISO 13790 standard and detailed modelling programs in a regulatory context. Journal of Building Performance Simulation, 1 (4). pp. 209-219. ISSN 1940-1493
Mabrouk, M. H. and McInnes, C.R. (2008) Solving the potential field local minimum problem using internal agent states. Robots and Autonomous Systems, 56 (12). pp. 1050-1060. ISSN 0921-8890
McInnes, Colin and Gorman, Daniel and Cartmell, Matthew (2008) Enhanced vibrational energy harvesting using non-linear stochastic resonance. Journal of Sound and Vibration, 318 (4-5). pp. 655-662. ISSN 0022-460X
Arlemark, E.J. and Dadzie, S.K. and Reese, J.M. (2008) A Navier-Stokes model incorporating the effects of near-wall molecular collisions with applications to micro gas flows. In: 1st European Conference on Microfluidics, Microflu'08, 2008-12-10 - 2008-12-12.
Liu, Haihu and Zhang, Yonghao (2008) Lattice Boltzmann simulation of droplet behaviour in microfluidic devices. In: 1st European Conference on Microfluidics, Microflu'08, 2008-12-10 - 2008-12-12.
Thomason, James (2008) Natural fibre composites. In: Mechanics of Materials and Structures and Bioengineering, Autumn Day Event, 2008-12-10 - 2008-12-10. (Unpublished)
Ma, Xianghong and Wu, Zhangming (2008) The application of micro-plate dynamics on monitoring cell property. In: 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2008, 2008-12-02 - 2008-12-04.
Biggs, James and Holderbaum, William (2008) Planning rigid body motions using elastic curves. Mathematics of Control, Signals, and Systems, 20 (4). pp. 351-367. ISSN 0932-4194
Clarke, Joseph Andrew and Johnstone, Cameron and Kelly, Nicolas and Strachan, Paul and Tuohy, Paul Gerard (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Energy Policy, 36 (12). pp. 4605-4609. ISSN 1873-6777
Kummert, M. and Bernier, M. (2008) Analysis of a combined photovoltaic-geothermal gas-fired absorption heat pump system in a Canadian climate. Journal of Building Performance Simulation, 1 (4). pp. 245-256. ISSN 1940-1493
Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2008) Procedural influences on non-linear distortions in welded thin-plate fabrication. Thin-Walled Structures, 46 (7-9). pp. 1021-1034. ISSN 0263-8231
Taylor, I. J. and Vezza, M. and Salisbury, I (2008) Numerical investigation of the effects of pedestrian barriers on aeroelastic stability of a proposed footbridge. Journal of Wind Engineering and Industrial Aerodynamics, 96 (12). pp. 2418-2437. ISSN 0167-6105
Oliveira, Monica and Oliveira, P.J. and Pinho, F.T. and Alves, M.A. (2008) Effect of contraction ratio upon viscoelastic flow in contractions : The axisymmetric case. Journal of Non-Newtonian Fluid Mechanics, 147 (1-2). pp. 92-108. ISSN 0377-0257
Burt, G.M. and Elders, I.M. and Galloway, S.J. and Kelly, N.J. and Tumilty, R.M. (2008) Assessment of highly distributed power systems using an integrated simulation approach. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7). pp. 657-668. ISSN 0957-6509
Kelly, N.J. and Clarke, J.A. and Ferguson, A. and Burt, G. (2008) Developing and testing a generic micro-combined heat and power model for simulations of dwellings and highly distributed power systems. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7). pp. 685-695. ISSN 0957-6509
Baig, Shahid and McInnes, Colin R. (2008) Artificial three-body equilibria for hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics, 31 (6). pp. 1644-1655. ISSN 1533-3884
Oliveira, Monica and Rodd, Lucy E. and McKinley, G.H. (2008) Simulations of extensional flow in microrheometric devices. Microfluidics and Nanofluidics, 5 (6). pp. 809-826. ISSN 1613-4982
Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced Polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (11). pp. 1732-1738. ISSN 1359-835X
Israr, Asif and Cartmell, Matthew P. and Manoach, Emil and Trendafilova, Irina and Ostachowicz, Wieslaw and Krawczuk, Marek and Zak, Arkadiusz (2008) Analytical modeling and vibration analysis of partially cracked rectangular plates with different boundary conditions and loading. Journal of Applied Mechanics, 76 (1). pp. 11005-11013. ISSN 0021-8936
Dadzie, S.K. and Reese, J.M. and McInnes, C.R. (2008) A continuum model of gas flows with localized density variations. Physica A: Statistical Mechanics and its Applications, 387 (24). pp. 6079-6094. ISSN 0378-4371
Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2008) Testing approaches for global optimization of space trajectories. In: 3rd International Conference on Bioinspired Optimization Methods and their ApplicationsBIOMA 2008, 2008-10-13 - 2008-10-14.
Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Potential field based navigation for planetary rovers using internal states. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Uchiyama, Kenji and McInnes, C.R. (2008) Analytical control laws for interplanetary solar sail trajectories with constraints. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Clarke, J. A. and Johnstone, C. M. and Kelly, N. J. and Strachan, P. A. and Tuohy, P. (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Other. Office of Science and Innovation, London.
Clarke, Joe and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie (2008) A contra-rotating marine current turbine on a flexible mooring : development of a scaled prototype. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17.
Connor, G. and Grant, A.D. and Johnstone, C.M. (2008) Development of a European tidal energy road map. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17. (Unpublished)
Ingram, David M. and Villate, José Luis and Abonnel, Cyrille and Johnstone, Cameron (2008) The development of protocols for equitable testing and evaluation in ocean energy. International Journal of Fluid Machinery and Systems, 1 (1). pp. 33-37. ISSN 1882-9554
Mabrouk, Mohamed H. and McInnes, Colin R. (2008) An emergent wall following behaviour to escape local minima for swarms of agents. International Journal of Computer Science, 35 (4). IJCS-35. ISSN 1819-656X
Radice, Gianmarco and Vasile, Massimiliano (2008) Activities of the advanced space research team at the University of Glasgow. JBIS, Journal of the British Interplanetary Society, 61 (10). pp. 404-411. ISSN 0007-084X
Rijal, Hom B. and Tuohy, Paul and Humphreys, Michael A. and Nicol, J. Fergus and Samuel, Aizaz and Raja, Iftikhar A. and Clarke, Joe (2008) Development of adaptive algorithms for the operation of windows, fans, and doors to predict thermal comfort and energy use in Pakistani buildings. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 114 (2). pp. 555-573. ISSN 0001-2505
Simo, Jules and McInnes, Colin R. (2008) Solar sail trajectories at the Earth-Moon Lagrange points. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (10). pp. 1618-1624. ISSN 1359-835X
Pickard, B S and Knight, H M and Hamilton, R S and Soares, D C and Walker, R and Boyd, J K F and Machell, J and McGhee, K A and Condie, A and Porteous, D J and St Clair, D and Davis, I and Blackwood, D H R and Muir, W J (2008) A common variant in the 3'UTR of the GRIK4 glutamate receptor gene affects transcript abundance and protects against bipolar disorder. Proceedings of the National Academy of Sciences, 105 (39). pp. 14940-14945. ISSN 0027-8424
Badawy, Ahmed and McInnes, Colin R. (2008) Spacecraft formation-flying using potential functions. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2008) Interception and deviation of near Earth objects via solar collector strategy. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Maddock, Christie and Vasile, Massimiliano (2008) Extension of the proximity-quotient control law for low-thrust propulsion. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Minisci, Edmondo and Avanzini, Giulio (2008) Comparative study on the application of evolutionary optimization techniques to orbit transfer manoeuvres. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Sanchez Cuartielles, J.P. and Vasile, M. and Radice, G. (2008) On the consequences of a fragmentation due to a NEO mitigation strategy. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Fletcher, Timothy M. and Duraisamy, Karthikeyan and Brown, Richard (2008) Aeroacoustic analysis of main rotor-tail rotor interaction. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19.
Kelly, Mary E. and Brown, Richard (2008) Predicting the wake structure of the HART II rotor using the vorticity transport model. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19.
Phillips, Catriona and Brown, R.E. (2008) The effect of helicopter configuration on the fluid dynamics of brownout. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19.
Schütze, Oliver and Vasile, Massimiliano and Coello Coello, Carlos A.; (2008) Approximate solutions in space mission design. In: Proceedings of the 10th international conference on Parallel Problem Solving from Nature. Lecture Notes in Computer Science, 5199 . Springer-Velag, Berlin, Heidelberg, DEU, pp. 805-814. ISBN 9783540876991
Abid, M. and Awan, A. W. and Nash, D. H. (2008) Stamina of a non-gasketed flange joint under combined internal pressure and axial loading. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222 (E3). pp. 143-155. ISSN 0954-4089
Mabrouk, Mohamed H. and Murray, Craig W. and Johnstone, Kevin and McInnes, Colin R. (2008) Internal agent states : experiments using the swarm leader concept. In: Towards Autonomous Robotic Systems (TAROS 08), 2008-09-01 - 2008-09-03.
Arebi, Bashir H. and Dempster, W. (2008) Bubble formation at two adjacent submerged orifices in inviscid fluids. Journal of Engineering Research, 10. pp. 33-48. ISSN 2307-1885
Bennet, Derek and McInnes, Colin R. (2008) Spacecraft formation flying using bifurcating potential fields. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Biggs, J.D. and McInnes, C. and Waters, T. (2008) Stabilizing periodic orbits above the elliptic plane in the solar sail 3-body problem. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2008) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. Thin-Walled Structures, 46 (7-9). pp. 963-974. ISSN 0263-8231
Wheel, M.A. (2008) A control volume-based finite element method for plane micropolar elasticity. International Journal for Numerical Methods in Engineering, 75 (8). pp. 992-1006. ISSN 0029-5981
Manoach, Emil and Trendafilova, I. (2008) Large amplitude vibrations and damage detection of rectangular plates. Journal of Sound and Vibration, 315 (3). pp. 591-606. ISSN 0022-460X
Tang, G.H. and Gu, X.J. and Barber, R. W. and Emerson, D. R. and Zhang, Y. H. and Reese, Jason (2008) Lattice Boltzmann simulation of nonequilibrium effects in oscillatory gas flow. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 78 (2). 026706-026714. ISSN 2470-0053
Tang, G.H. and Zhang, Y. H. and Gu, X.J. and Emerson, D. R. (2008) Lattice Boltzmann modelling Knudsen layer effect in non-equilibrium flows. EPL: A Letters Journal Exploring the Frontiers of Physics, 83 (4). 40008. ISSN 0295-5075
Vasile, Massimiliano and Maddock, Christie and Radice, Gianmarco (2008) Mirror formation control in the vicinity of an asteroid. In: AIAA/AAS Astrodynamics Specialist Conference 2008, 2008-08-18 - 2008-08-21.
Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2008) On testing global optimization algorithms for space trajectory design. In: AIAA/AAS Astrodynamics Specialist Conference 2008, 2008-08-18 - 2008-08-21.
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A.; (2008) Viscoelastic fluid flow through 3D square-square expansions. In: Proceedings of the XV International Congress on Rheology, ICR2008. UNSPECIFIED, California.
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2008) Viscoelastic fluid flow through 3D square-square expansions. In: XVth International Congress on Rheology, 2008-08-03 - 2008-08-08.
Kim, Hyo Won and Brown, Richard E.; Yoo, Seung-Deog, ed. (2008) Modelling the aerodynamics of coaxial helicopters : from an isolated rotor to a complete aircraft. In: EKC2008 Proceedings of the EU-Korea Conference on Science and Technology. Springer Proceedings in Physics, 124 . Springer-Verlag, Berlin, Heidelberg, pp. 45-59. ISBN 9783540851905
Pan, W. and Qin, Yi and Law, F. and Ma, Y. and Brockett, A. and Juster, N.P. (2008) Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming. International Journal of Advanced Manufacturing Technology, 38 (3-4). pp. 393-401. ISSN 1433-3015
Mabrouk, Mohamed H. and McInnes, Colin R. (2008) Non-linear stability of vortex formation in swarms of interacting particles. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 78 (1). ISSN 2470-0053
Tuohy, Paul (2008) Air-conditioning : the impact of UK regulations, the risks of unnecessary air-conditioning and a capability index for non-air-conditioned naturally ventilated buildings. In: Air Conditioning and the Low Carbon Cooling Challenge, 2008-07-27 - 2008-07-29, Cumberland Lodge.
Arlemark, E.J. and Dadzie, S.K. and Reese, J.M.; (2008) An extension to the Navier-Stokes-Fourier equations by considering molecular collisions with boundaries. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 95-102. ISBN 978-0-7918-4834-0
Borg, M.K. and Reese, J.M.; (2008) A hybrid particle-continuum framework. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 995-1004. ISBN 978-0-7918-4834-0
Macpherson, Graham B. and Reese, Jason M.; (2008) Molecular dynamics for fluid mechanics in arbitrary geometries. In: ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, New York, pp. 969-976. ISBN 9780791848340
Kim, Hyo Wan and Kenyon, Adam R. and Duraisamy, Karthikeyan and Brown, R.E. (2008) Interactional aerodynamics and acoustics of a hingeless coaxial helicopter with an auxiliary propeller in forward flight. In: 9th International Powered Lift Conference, IPLC2008, 2008-07-22 - 2008-07-24.
McCombes, Tom and Johnstone, C.M. and Grant, A.D. (2008) Unsteady hydrodynamic modelling of rotor systems used in marine current turbines. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)
Ete, Arnaud and Hoffheinz, Geoff and Kelly, Nick and Ulleberg, Øystein (2008) Hydrogen energy systems : development and application of modelling tools. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.
Dadzie, S. Kokou and Reese, Jason M.; (2008) The concept of mass-density in classical thermodynamics and the Boltzmann kinetic equation for dilute gases. In: Proceedings of the 26th International Symposium on Rarified Gas Dynamics. American Institute of Physics, JPN. ISBN 9780735406155
Clarke, Joe (2008) Computational tools for low energy building design : capabilities and requirements. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.
Clarke, Joe and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie Eugenia (2008) Contra-rotating marine current turbines : performance in field trials and power train developments. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.
Counsell, John and Khalid, Yousaf Ali (2008) Controllability of modern commercial buildings. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)
Madhlopa, Amos and Johnstone, Cameron (2008) Preliminary results from the testing of an advanced passive solar still incorporating a shielded condenser. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.
Robertson, A.C. and Taylor, I.J. (2008) Numerical simulation of rivulet evolution on a circular cylinder in an airflow. In: 8th UK Conference on Wind Engineering, 2008-07-14 - 2008-07-16.
Gislason, Magnus Kjartan and Nash, David (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. In: 16th Congress of the European Society of Biomechanics, 2008-07-06 - 2008-07-09.
Mabrouk, M. H. and McInnes, C. R.; (2008) Wall following to escape local minima for swarms of agents using internal states and emergent behaviour. In: Proceedings of the World Congress on Engineering 2008. International Association of Engineers, GBR, pp. 24-31. ISBN 9789889867195
Robertson, A.C. and Taylor, I.J. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M.; Zolotarev, I. and Horacek, J., eds. (2008) A model for the numerical simulation of rivulet evolution on a circular cylinder in an air flow. In: Flow-induced vibration. The Academy of Sciences of the Czech Republic, Prague, pp. 693-698. ISBN 9788087012123
Srinivasa Pai, P. and Mathew, M. T. and Stack, M.M. and Rocha, L.A. (2008) Some thoughts on neural network modelling of micro-abrasion-corrosion processes. Tribology International, 41 (7). pp. 672-681.
Biggs, J.D. and McInnes, C. and Waters, Thomas (2008) New periodic orbits in the solar sail restricted three body problem. In: 2nd Conference on Nonlinear Science and Complexity, 2008-07-28 - 2008-07-31.
Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kim, Jae Min (2008) The application of demand-side management via internet-enabled monitoring and control. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)
Clarke, Joseph Andrew and Johnstone, Cameron and Kim, Jae Min and Kokogiannakis, Georgios and Strachan, Paul and Woo, K. and Kang, B. (2008) Study of the energy performance of Korean apartment buildings with alternative balcony configurations. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)
Dadzie, S.K. (2008) Conditions aux limites dans un gaz raréfié: loi de réflexion à la paroi, saut de température, vitesse de glissement, couche de Knudsen Boundary conditions in rarefied gas flows: scattering kernal, temperature jump, slip velocity, Knudsen layer problem. PhD thesis, Edilivre Universitaire.
Gislason, Magnus K. and Nash, David H. and Stansfield, Benedict (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. Journal of Biomechanics, 41 (Supple). S147-S147. ISSN 0021-9290
Gorman, Daniel G. and Trendafilova, Irina and Mulholland, Anthony J. and Horáček, Jaromir (2008) Vibration analysis of a circular plate in interaction with an acoustic cavity leading to extraction of structural modal parameters. Thin-Walled Structures, 46 (7-9). pp. 878-886. ISSN 0263-8231
Nash, D.H. (2008) Introduction - Professor Jim Rhodes, Founding Editor. Thin-Walled Structures, 46 (7-9). p. 703. ISSN 0263-8231
Roy, M. and Sundararajan, G. and Stack, M.M. (2008) Tribo-Corrosion 2006 - a passage to India to celebrate the 1st International Conference on Tribo-Corrosion. Tribology International, 41 (7). pp. 571-572.
Trendafilova, I. and Manoach, Emil (2008) Vibration-based damage detection in plates by using time series analysis. Mechanical Systems and Signal Processing, 22 (5). pp. 1092-1106. ISSN 0888-3270
Vasile, Massimiliano and Colombo, Camilla (2008) Optimal impact strategies for asteroid deflection. Journal of Guidance, Control and Dynamics, 31 (4). pp. 858-872. ISSN 1533-3884
Waters, Thomas J. and McInnes, Colin R. (2008) Solar sail dynamics in the three-body problem: homoclinic paths of points and orbits. International Journal of Non-Linear Mechanics, 43 (6). pp. 490-496. ISSN 0020-7462
Chernyshenko, S.I. and Castro, I.P. and Hetsch, T. and Iollo, A. and Minisci, Edmondo and Savelsberg, R. (2008) Vortex cell shape optimization for separation control. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04.
Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2008) An algorithm based on differential dynamic programming for low-thrust trajectories. In: New Trends in Astrodynamics and Applications V, 2008-06-30 - 2008-07-02.
Lockerby, Duncan A. and Reese, Jason (2008) A simple method for capturing some complex physics of gas flows in MEMS. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04. (Unpublished)
Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Using internal states and swarming behaviours to enhance the performance of swarm robots. In: Bridging the Gap, University of Strathclyde Research Day, BTG 2008, 2008-06-28.
Minisci, Edmondo and Avanzini, Giulio and D'Angelo, S. (2008) Multi-objective design of robust flight control systems. In: Mathematical Problems in Engineering, Aerospace and Sciences, ICPAA 2008, 2008-06-25 - 2008-06-27.
Clive, P.J.M. and Chindurza, I. and Ravey, I. and Bass, J. and Boyle, R.J. and Jones, P. and Lang, S.J. and Bradley, S. and Hay, L. and Oldroyd, Andrew and Stickland, M.T.; (2008) The Myres Hill remote sensing intercomparison study: preliminary results. In: IOP Conference Series: Earth and Environmental Science. IOP Publishing, Technical University of Denmark, Copenhagen, U157-U166.
Camilleri, D. and Gray, T.G.F. and Nash, D.H.; (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076
Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, Cranfield.
Trendafilova, I. and Cartmell, Matthew P. and Ostachowicz, Wieslaw and Cartmell, Matthew (2008) Vibration-based damage detection in an aircraft wing scaled model using principal component analysis and pattern recognition. Journal of Sound and Vibration, 313 (3-5). pp. 560-566. ISSN 0022-460X
Oliveira, Monica (2008) Microfluidics and its applications in extensional rheology. In: RheoProcessing 2008 - Multiscale Rheology and Polymer Processing, 2008-06-12 - 2008-06-14.
Tang, G.H. and Zhang, Yonghao and Barber, Robert W. and Emerson, David (2008) Lattice Boltzmann simulation of viscous gas damping in microstructures. In: 2nd International Symposium on Physics of Fluids, 2008-06-06 - 2008-06-09. (Unpublished)
David-West, Opukuro S. and Symington, Mark C. and Pethrick, Richard A. and Banks, William M. and Thomason, J.L. (2008) Mechanical testing of natural fibre reinforced polyester resin composites and Mode 1 fracture toughness testing of resin blocks. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Symington, Mark C. and David-West, Opukuro S. and Banks, William M. and Pethrick, Richard A. and Thomason, J.L. (2008) The effect of alkalisation on the mechanical properties of natural fibres. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Symington, Mark C. and David-West, Opukuro S. and Banks, William M. and Thomason, J.L. and Pethrick, Richard A. (2008) Vacuum infusion of natural fibre composites for structural applications. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Thomason, J.L. (2008) Anisotropy of reinforcement fibres and its influence on the apparent interfacial shear strength in thermoplastic composites. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Thomason, J.L. (2008) Understanding the impact performance of injection moulded long fibre reinforced polyamide. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Wang, C.C. and Thomason, J. L. and Jones, F.R. (2008) The investigation of fibre reinforcement effects in thermoplastic materials : interfacial bond strength and fibre end parameter. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.
Grant, Andrew and Johnstone, Cameron and Kelly, Nick (2008) Urban wind energy conversion: the potential of ducted turbines. Renewable Energy, 33 (6). pp. 1157-1163. ISSN 0960-1481
Lockerby, Duncan A. and Reese, Jason M. (2008) On the modelling of isothermal gas flows at the microscale. Journal of Fluid Mechanics, 604. pp. 235-261. ISSN 0022-1120
Wood, J. (2008) A review of literature for the structural assessment of mitred bends. International Journal of Pressure Vessels and Piping, 85 (5). pp. 275-294. ISSN 0308-0161
Duraisamy, Karthikeyan and Brown, Richard (2008) Aerodynamic response of a hovering rotor to ramp change in pitch input. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01.
Phillips, Catriona and Brown, R.E. (2008) Eulerian simulation of the fluid dynamics of helicopter brownout. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01.
Dempster, W.M. and Elmayyah, W. (2008) A computational fluid dynamics evaluation of a pneumatic safety relief valve. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 2008-05-27 - 2008-05-29.
Pan, W. and Qin, Y. (2008) FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models. Journal of Materials Processing Technology, 201 (1-3). pp. 220-225. ISSN 0924-0136
Clarke, J A and Ghauri, Sabeeta and Johnstone, C M and Kim, J M and Tuohy, P G (2008) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: eSim 2008, 2008-05-20 - 2008-05-23.
Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion-cogeneration. In: The Canadian Building Simulation Conference, eSim 2008, 2008-05-20 - 2008-05-22.
Thomason, J.L. (2008) Structure-performance relationships of thermoplastic composites for automotive applications. In: 14th Rolduc Polymer Meeting "From Commodity Plastics to Speciality Polymers ?", 2008-05-18 - 2008-05-21.
Naruse, T. and Mackenzie, D. (2008) Design analysis of ductile failure in dovetail connections. Journal of Strain Analysis for Engineering Design, 43 (5). pp. 295-306. ISSN 0309-3247
David-West, O.S. and Nash, D.H. and Banks, W.M. (2008) An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact. Composite Structures, 83 (3). pp. 247-258. ISSN 0263-8223
Kelly, Nick and Galloway, Stuart and Elders, Ian and Tumilty, Ryan and Burt, Graeme (2008) Modelling the impact of micro generation on the electrical distribution system. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01.
Le Feuvre, P. and Kummert, M. (2008) Ground source heat pumps in the UK - market status and evaluation. In: 9th IEA Heat Pump Conference 2008, 2008-05-20 - 2008-05-22.
Mabrouk, M.H. and McInnes, C.R. (2008) Social potential model to simulate emergent behaviour for swarm robots. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 2008-05-27 - 2008-05-29.
Reese, Jason and Emerson, David and Clare, H. (2008) Guest editorial article: special issue on micro- and nanoscale flows : advancing the engineering science and design. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (5). i-ii. ISSN 0954-4062
Thomason, J.L. (2008) Natural fibre reinforced polypropylene. In: Research Seminar, National Centre for Prosthetics and Orthotics, 2008-05-01.
Waters, Thomas J. and McInnes, Colin R. (2008) Invariant manifolds and orbit control in the solar sail three-body problem. Journal of Guidance, Control and Dynamics, 31 (3). pp. 554-562. ISSN 1533-3884
Arndt, Ulli and Beausoleil-Morrison, Ian and Brouwer, Jack and Dorer, Viktor and Ferguson, Alex and Griffith, Brent and Kelly, Nick and Klobut, Krzysztof and Knight, Ian and Lie, Bernt and Mauch, Wolfgang and Peeters, Leen and Manning, Marianne and di Pietra, Biagio and Ribberink, Hajo and Roselli, Carlo and Sasso, Maurizio and Sibilio, Sergio and Swinton, Mike and Tzscheutschler, Peter and Weber, Andreas (2008) An Experimental and Simulation-based Investigation of the Performance of Small-scale Fuel Cell and Combustion-based Cogeneration Devices Serving Residential Buildings : Final Report of Annex 42 of the International Energy Agency's Energy Conservation in Buildings and Community Systems Programme. Natural Resources Canada Ottawa, Ottawa.
Beyer, Denny and Kelly, Nick (2008) Modelling the behaviour of domestic micro-cogeneration under different operating regimes and with variable thermal buffering. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01.
Kelly, Nick and Ferguson, Alex and Griffith, Brent and Weber, Andreas (2008) The development of a generic systems-level model for combustion-based domestic cogeneration. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01.
Kim, Hyo Wan and Duraisamy, Karthikeyan and Brown, Richard (2008) Aeroacoustics of a coaxial rotor in level flight. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01.
Peeters, Leen and Kelly, N.J. and D'Haeseleer, William (2008) Thermal comfort in residential buildings with water based heating systems: a tool for selecting appropriate heat emitters when using µ-cogeneration. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01.
Bennet, Derek J. and McInnes, C.R. (2008) Pattern transition in spacecraft formation flying via the artificial potential field method and bifurcation theory. In: 3rd International Symposium on Formation Flying, Missions and Technologies, 2008-04-23 - 2008-04-25.
Gislason, M.K. and Nash, D.H. (2008) Using finite element method in preoperative planning for wrist surgery. In: Engineering the Upper Limb: Patient Specific Surgical Planning and Implementation, 2008-04-23 - 2008-04-24.
Tang, Gu-Hua and Zhang, Yong-hao and Emerson, David R. (2008) Lattice Boltzmann models for non-equilibrium gas flows. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 77 (4). 046701-046707. ISSN 2470-0053
Camilleri, Duncan (2008) Integrating finite element analysis in design and manufacture of welded structures. In: 17th Annual Conference on Marine Engineering: Beyond Our Shores, 2008-04-17 - 2008-04-17, Malta.
Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. Wear, 264 (9-10). pp. 826-837. ISSN 0043-1648
Crawley, Drury B. and Hand, Jon W. and Kummert, Michael and Griffith, Brent T. (2008) Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43 (4). pp. 661-673. ISSN 0360-1323
Fletcher, Timothy M. and Brown, R.E. (2008) Main rotor-tail rotor intraction and its implications for helicopter directional control. Journal of the American Helicopter Society, 53 (2). pp. 125-138. ISSN 0002-8711
Liu, Xiaoming and Thomason, James L. and Jones, Frank R. (2008) XPS and AFM study of interaction of organosilane and sizing with e-glass fibre surface. Journal of Adhesion, 84 (4). pp. 322-338. ISSN 0021-8464
Maddock, Christie and Vasile, Massimiliano (2008) Design of optimal spacecraft-asteroid formations through a hybrid global optimization approach. International Journal of Intelligent Computing and Cybernetics, 1 (2). pp. 239-268. ISSN 1756-378X
McInnes, C.R. and Waters, T.J. (2008) Reconfiguring smart structures using phase space connections. Smart Materials and Structures, 17 (2). 025030. ISSN 0964-1726
Pan, Wenke and Wheel, Marcus and Qin, Yi (2008) A six-node triangle finite volume method for solids with a rotational degree of freedom for incompressible material. In: 16th. UK Conference on Computational Mechanics (ACME-UK), 2008-04-01.
Strachan, Paul and Kokogiannakis, Georgios and Macdonald, Iain (2008) History and development of validation with the ESP-r simulation program. Building and Environment, 43 (4). pp. 601-609. ISSN 0360-1323
Oliveira, Monica and Pinho, F.T. and Poole, R.J. and Oliveira, P.J. and Alves, M.A. (2008) Purely-elastic flow asymmetries in flow-focusing devices. In: Complex Flows of Complex Fluids, 2008-03-17 - 2008-03-19.
Madhlopa, A. and Johnstone, C. (2008) Potential for water distillation by using solar energy in Malawi. Environment and Health International, 10 (2). pp. 51-53. ISSN 0726-9210
David-West, O.S. and Alexander, N.V. and Nash, David and Banks, William (2008) Energy absorption and bending stiffness in CFRP laminates : the effect of 45º plies. Thin-Walled Structures, 46 (7-9). pp. 860-869. ISSN 0263-8231
O'Hare, Lynne and Scanlon, Thomas and Emerson, David and Reese, Jason (2008) Evaluating constitutive scaling models for application to compressible microflows. International Journal of Heat and Mass Transfer, 51 (5-6). pp. 1281-1292. ISSN 0017-9310
Mathew, M.T. and Stack, M. M. and Matijevic, B. and Rocha, L.A. and Ariza, E. (2008) Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. Tribology International, 41 (2). pp. 141-149. ISSN 0301-679X
Strachan, P.A. and Baker, P.H. (2008) Outdoor testing, analysis and modelling of building components. Building and Environment, 43 (2). pp. 127-128. ISSN 0360-1323
Mizzi, Simon and Gu, X.J. and Emerson, David and Barber, Robert W. and Reese, Jason (2008) Computational framework for the regularized 20-moment equations for non-equilibrium gas flows. International Journal for Numerical Methods in Fluids, 56 (8). pp. 1433-1439. ISSN 0271-2091
Camilleri, D. and Mackenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). 011202. ISSN 0094-9930
Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836
Strachan, P.A. (2008) Simulation support for performance assessment of building components. Building and Environment, 43 (2). pp. 228-236. ISSN 0360-1323
Strachan, P.A. and Vandaele, L. (2008) Case studies of outdoor testing and analysis of building components. Building and Environment, 43 (2). pp. 129-142. ISSN 0360-1323
Rijal, H. B. and Tuohy, P. and Nicol, F. and Humphreys, M. A. and Samuel, A. and Clarke, J. (2008) Development of an adaptive window-opening algorithm to predict the thermal comfort, energy use and overheating in buildings. Journal of Building Performance Simulation, 1 (1). pp. 17-30. ISSN 1940-1493
Kelly, Mary E. and Duraisamy, Karthikeyan and Brown, Richard (2008) Predicting blade vortex interaction, airloads and acoustics using the vorticity transport model. In: 9th American Helicopter Society Aeromechanics Specialists' Meeting, 2008-01-23 - 2008-01-25.
Kim, Hyo Wan and Kenyon, Adam R. and Duraisamy, Karthikeyan and Brown, Richard (2008) Interactional aerodynamics and acoustics of a propeller-augmented compound coaxial helicopter. In: 9th American Helicopter Society Aeromechanics Specialists' Meeting, 2008-01-23 - 2008-01-25.
Samuel, Aizaz Aamir and Strachan, Paul (2008) Integration of network flow modelling and computational fluid dynamics to simulate contaminant transport and behaviour in the indoor environment. In: ASHRAE Winter Meeting, 2008-01-19 - 2008-01-23.
Mizzi, Simon and Gu, X.J. and Emerson, David and Barber, Robert W. and Reese, Jason; (2008) Application of a high-order macroscopic approach to a force-driven Poiseuille flow in the slip and transition regimes. In: Proceedings of the Micro/Nanoscale Heat Transfer International Conference (MNHT2008). ASME. ISBN 0791838137
Tang, G.H. and Gu, X.J. and Zhang, Yonghao and Reese, Jason and Barber, Robert W. and Emerson, David; (2008) Pulsating electroosmotic flow and wall block mixing in microchannels. In: Proceedings of MNHT2008, Micro/Nanoscale Heat Transfer International Conference. ASME.
Vasile, Massimiliano and Ceriotti, Matteo and Radice, Gianmarco and Becerra, Victor M. and Nasuto, Slawomir J. and Anderson, James D. (2008) Global Trajectory Optimisation : Can We Prune the Solution Space When Considering Deep Space Manoeuvres? [Final Report]. European Space Agency, [Paris].
Badawy, Ahmed and McInnes, Colin (2008) On-orbit assembly using superquadric potential fields. Journal of Guidance, Control and Dynamics, 31 (1). pp. 30-43. ISSN 1533-3884
Bookless, John and McInnes, Colin (2008) Control of Lagrange point orbits using solar sail propulsion. Acta Astronautica, 62 (2-3). pp. 159-176. ISSN 0094-5765
MacKenzie, P.M. and Forrester, M.A. (2008) Sailboat propeller drag. Ocean Engineering, 35 (1). pp. 28-40. ISSN 0029-8018
Macpherson, Graham B. and Reese, Jason M. (2008) Molecular dynamics in arbitrary geometries : parallel evaluation of pair forces. Molecular Simulation, 34 (1). pp. 97-115. ISSN 1029-0435
Samuel, Aizaz Aamir and Strachan, Paul (2008) Integration of network flow modelling and computational fluid dynamics to simulate contaminant transport and behaviour in the indoor environment. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 114. pp. 250-258. ISSN 0001-2505
Thomason, J.L. (2008) Anisotropy of reinforcement fibres and interface strength in thermoplastic composites. In: Gordon Conference on Composites, 2008-01-13 - 2008-01-18.
Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Infield, D.G. and Jardine, C. and Kelly, N.J. and Leach, M.O. and Matian, M. and Peacock, A.D. and Staffell, I. and Sudtharalingam, S. and Woodman, B. (2008) Review of UK microgeneration. Part 1 : policy and behavioural aspects. Proceedings of the ICE - Civil Engineering, 162 (1). pp. 23-36. ISSN 0965-089X
Biggs, James and Holderbaum, William (2008) Integrable Hamiltonian systems defined on the Lie groups SO(3) and SU(2) : an application to the attitude control of a spacecraft. In: 5th Wismar Symposium on Automatic Control, AUTSYM'08, 2008-09-18 - 2008-09-19.
Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18.
Doo, G.H. and Dempster, W.M. and McNaught, J.M., DTI (Funder), EPSRC (Funder), TUVNEL (Funder), Hyprotech UK Ltd (now Aspen Technology Inc.) (Funder) (2008) Improved prediction of shell side heat transfer in horizontal evaporative shell and tube heat exchangers. Heat Transfer Engineering, 29 (12). pp. 999-1007. ISSN 0145-7632
Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion cogeneration model. In: eSim 2008: 5th IBPSA - Canada Conference, 2008-05-21 - 2008-05-22.
Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2008) Mars and moon exploration passing through the european precision landing GNC test facility. Acta Astronautica, 63 (1-4). pp. 74-90. ISSN 0094-5765
Hand, J. and Crawley, D.B. and Donn, Michael and Lawrie, Linda K. (2008) Improving non-geometric data available to simulation programs. Building and Environment, 43 (4). pp. 674-685. ISSN 0360-1323
Kummert, M. (2008) Feasiblity of a hybrid CHP/GSHP system for the Tynecastle stadium. Case study. University of Strathclyde.
Kummert, M. (2008) A combined PV-geothermal absorption heat pump system for space conditioning and domestic hot water heating. Other. University of Strathclyde.
Kummert, Michael and Bernier, Michel (2008) Sub-hourly simulation of residential ground coupled heat pump systems. Building Services Engineering Research and Technology, 29 (1). pp. 27-44. ISSN 0143-6244
Kummert, Michaël (2008) Optimising system performance of hybrid systems. In: Electric Heating: Yesterday's Villain Tomorrow's Saviour?, 2008-04-17 - 2008-04-17. (Unpublished)
Li, Z. Y. and Wilcoxon, J. P. and Yin, F. and Chen, Y. and Palmer, R. E. and Johnston, R. L. and Chen, Yu (2008) Structures and optical properties of 4-5 nm bimetallic AgAu nanoparticles. Faraday Discussions, 138. pp. 363-373. ISSN 1359-6640
Macpherson, Graham Bruce (2008) Molecular Dynamics Simulation in Arbitrary Geometries for Nanoscale Fluid Mechanics. PhD thesis, University Of Strathclyde.
McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2008) Modelling a Nitinol device for the repair of abdominal aortic aneurysms. In: Proceedings of the ASM International Conference on Shape Memory and Superelastic Technologies, 2006-05-07 - 2006-05-11.
McElroy, Lori and Cockroft, Jeremy and Hand, Jon; (2008) Business success through process based application of simulation. In: Proceedings of Building Simulation Conference 2007. International Building Performance Simulation Association, CHN, pp. 1740-1747. ISBN 9780977170630
Nash, David H.; Rao, K.R., ed. (2008) UK Rules For Unfired Pressure Vessels. In: The Companion Guide to ASME Boiler and Pressure Vessel Code. ASME. ISBN 9780971902717
Park, H.S. and Kim, Jae Min and Kim, J.Y.; Yoo, SD, ed. (2008) Development of and research on energy-saving buildings in Korea. In: EKC2008: Proceedings of the EU-Korea conference on science and technology. Proceedings in Physics, 124 . Springer, DEU, pp. 287-296. ISBN 9783540851899
Phillipson, M.C. and Baker, P.H. and Davies, M. and Ye, Z. and Galbraith, G.H. and McLean, R.C. (2008) Suitability of time domain reflectometry for monitoring moisture in building materials. Building Services Engineering Research and Technology, 29 (3). pp. 261-272. ISSN 0143-6244
Radice, Gianmarco and Macdonald, Malcolm (2008) Collision and evaporation avoidance for spacecraft formation. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.
Scanlon, T.J. and O'Hare, L. (2008) A continuum model for rarefied microchannel gas flows. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062
Spence, John (2008) Professor Jim Rhodes. Thin-Walled Structures, 46 (7-9). pp. 704-705. ISSN 0263-8231
Zhang, Yonghao and Gu, X.J. and Barber, Robert W. and Emerson, David; (2008) A thermal lattice Boltzmann model for micro/nano-flows. In: Proceedings of Micro/Nanoscale Heat Transfer International Conference (MNHT2008). ASME, pp. 1275-1281. ISBN 0791842924
2007
Arndt, Ulli and Beausoleil-Morrison, Ian and Davis, Mark and D'haeseleer, William and Dorer, Viktor and Entchev, Evgeuniy and Ferguson, Alex and Gusdorf, John and Kelly, Nick and Manning, Marianne and Peeters, Leen and Sasso, Maurizio and Schreiber, Daniel and Sibilio, Sergio and Siemens, Kathleen and Swinton, Mike (2007) Experimental Investigation of Residential Cogeneration Devices and Calibration of Annex 42 Models : A Report of Subtask B of FC+COGEN-SIM The Simulation of Building-Integrated Fuel Cell and Other Cogeneration Systems. Natural Resources Canada Ottawa, Ottawa.
Robertson, A.C. and Taylor, I.J. (2007) Investigating the addition and oscillation of artificial rivulets to stay cables using a discrete vortex method. In: 7th International Symposium on Cable Dynamics, 2007-12-10 - 2007-12-13. (Unpublished)
Macpherson, G.B. and Borg, M.K. and Reese, J.M. (2007) Generation of initial molecular dynamics configurations in arbitrary geometries and in parallel. Molecular Simulation, 33 (15). pp. 1199-1212. ISSN 1029-0435
McCummiskey, E. and Dempster, W.M. and Nash, D.H. (2007) The effect of variance in input parameters for Nitinol constitutive models in FE analysis. In: International Conference on Shape Memory and Superelastic Technologies, 2007-12-03 - 2007-12-05. (Unpublished)
Ulleberg, Øystein and Ito, Hiroshi and Maack, María Hildur and Ridell, Bengt and Miles, Shannon and Kelly, Nick and Iacobazzi, Agostino and del Pilar Argumosa, Maria and Schoenung, Susan and Stewart, Emma (2007) Hydrogen Demonstration Project Evaluations : FINAL REPORT for IEA – International Energy Agency HIA – Hydrogen Implementing Agreement Task 18: Integrated Systems Evaluation Subtask B: Demonstration Project Evaluations. International Energy Agency, [S.I.].
Gorman, D.G. and Trendafilova, I. and Mulholland, A.J. and Horáček, J. (2007) Analytical modelling and extraction of the modal behaviour of a cantilever beam in fluid interaction. Journal of Sound and Vibration, 308 (1-2). pp. 231-245. ISSN 0022-460X
Badawy, Ahmed (2007) On-Orbit Manoeuvring Using Superquadric Potential Fields. PhD thesis, University Of Strathclyde.
Beausoleil-Morrison, Ian and Kelly, Nick (2007) Specifications for modelling fuel cell and combustion-based residential cogeneration device within whole-building simulation programs. International Energy Agency.
Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2007) Computational methods and experimental validation of welding distortion models. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 235-249. ISSN 1464-4207
Johnstone, C. (2007) Development and testing of an innovative turbine for harnessing power from the tides. In: 9th Asian International Conference on Fluid Machinery, 2007-10-16 - 2007-10-19. (Unpublished)
Macdonald, Martin and Rhodes, James and Kotelko, Maria (2007) Stainless steel stub columns subject to combined bending and axial loading. Thin-Walled Structures, 45 (10-11). pp. 893-897. ISSN 0263-8231
Mohr, S. and Zhang, Yonghao and MacAskill, Alexandra and Day, P.J.R. and Barber, Robert W. and Goddard, N.J. and Emerson, David and Fielden, P.R. (2007) Numerical and experimental study of a droplet-based PCR chip. Microfluidics and Nanofluidics, 3 (5). pp. 611-621. ISSN 1613-4982
Rhodes, J. (2007) Some recent research on thin-walled members at the university of strathclyde. Thin-Walled Structures, 45 (10-11). pp. 821-826. ISSN 0263-8231
Trendafilova, Irina and Manoach, E. and Cartmell, M.P. and Ostachowicz, W. and Zak, A. (2007) An investigation on damage detection in aircrafts panels using nonlinear time series analysis. Key Engineering Materials, 347. pp. 213-218. ISSN 1013-9826
Becerra, Victor M. and Nasuto, Slawomir J. and Anderson, James D. and Ceriotti, M. and Bombardelli, Claudio (2007) Search space pruning and global optimization of multiple gravity assist trajectories with deep space manoeuvers. In: IEEE Congress on Evolutionary Computation (CEC), 2007-09-25 - 2007-09-28.
Maddock, Christie and Vasile, Massimiliano; (2007) Optimal design for a NEO tracking spacecraft formation. In: IEEE Congress on Evolutionary Computing. IEEE, Singapore, Paper 1728. ISBN 978-1-4244-1339-3
Ceriotti, M. and Colombo, C. and Croisard, Nicolas and McLean, Timothee (2007) Preliminary mission analysis for the ESMO mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.
Ceriotti, M. and Vasile, M. and Bombardelli, Claudio (2007) An incremental algorithm for fast optimisation of multiple gravity assist trajectories. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.
Colombo, Camilla and Novak, Daniel and Heiligers, Jeannette (2007) Low-thrust trajectories design for the European Student Moon Orbiter mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.
Clarke, Joseph Andrew and Kelly, Nicolas and Tang, Dechao (2007) A review of ESP-r's flexible solution approach and its application to prospective technical domain developments. Advances in Building Energy Research, 1 (1). pp. 227-247.
Bernier, M. and Kummert, M. and Bertagnolio, S. (2007) Development and application of test cases for comparing vertical ground heat exchanger models. In: International Building Performance Simulation Association (IBPSA) Conference 2007, 2007-09-03 - 2007-09-06.
Clarke, Joseph Andrew and Johnstone, Cameron and Hong, Jun and Kim, Jae Min and Strachan, Paul and Hwang, I. and Li, Hongjun (2007) A multi-criteria performance study of an integrated demand/supply energy system for low and zero carbon technologies within domestic building design. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06.
Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kelly, Nicolas; Jiang, Y and Zhu, Y.X. and Yang, X.D. and Li, X.T., eds. (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building simulation 2007 proceedings. Tsinghua University Press, Beijing, pp. 1653-1660. ISBN 9780977170630
Clarke, J.A. and Hong, Jun and Johnstone, C. and Kelly, N.J.; (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building Simulation. Springer Verlag, Germany, pp. 1654-1660. ISBN 1996-3599
Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836
Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron (2007) Performance evaluation of a dual contra rotating rotor tidal turbine. In: 7th European Wave and Tidal Energy Conference, 2007-09-11 - 2007-09-14.
Macdonald, I. A. and Clarke, J. A. (2007) Applying uncertainty considerations to energy conservation equations. Energy and Buildings, 39 (9). pp. 1019-1026. ISSN 0378-7788
Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247
McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2007) The determination and evaluation of Nitinol constitutive models for finite element analysis. Applied Mechanics and Materials, 7-8. pp. 81-88. ISSN 1660-9336
Greenshields, Christopher and Reese, Jason M. (2007) The structure of shock waves as a test of Brenner's modifications to the Navier-Stokes equations. Journal of Fluid Mechanics, 580. pp. 407-429. ISSN 0022-1120
Kummert, M. and Bernier, M. and Costa, J. and Paris, J. (2007) A comparison between geothermal absorption and compression heat pumps for space conditioning. International Journal of Environmental Studies, 64 (4). pp. 467-487. ISSN 0020-7233
Oliveira, Monica and Alves, M.A. and Pinho, F.T. and McKinley, G.H. (2007) Viscous fluid flow through microfabricated hperbolic contractions. Experiments in Fluids, 43 (2-3). pp. 437-451. ISSN 1432-1114
Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2007) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.
Mollicone, Pierluigi and Camilleri, Duncan and Gray, Thomas (2007) Procedural influences on non-linear distortions in welded thin plate fabrication. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.
Biggs, James and Holderbaum, William (2007) Integrating Hamiltonian systems defined on the Lie groups SO(4) and SO(1,3). In: The 45th European Control Conference (ECC '07), 2007-07-02 - 2007-07-05.
Badawy, A. and McInnes, C.R. (2007) Robot motion planning using hyperboloid potential functions. In: World Congress on Engineering 2007, 2007-07-02 - 2007-07-04.
Robertson, A.C. and Taylor, I.J. (2007) Effect of rivulets on a circular cylinder using a 2D discrete vortex method. In: 12th International Conference on Wind Engineering, 2007-07-01 - 2007-07-06. (Unpublished)
Taylor, Ian and Vezza, M. (2007) An investigation into the aerolastic stability of a footbridge using proper orthogonal decomposition analysis. In: 12th International Conference on Wind Engineering, 2007-07-01 - 2007-07-06.
Camilleri, D. and Mackenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089
David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE (2007) An experimental study of the response of composite pipes under impact loading. In: Proceedings of the 17th (2007) international offshore and polar engineering conference. ISOPE, California, USA, pp. 3492-3497. ISBN 1880653680
Greenshields, C.J. and Reese, J.M.; (2007) The structure of hypersonic shock waves using Navier-Stokes equations modified to include mass diffusion. In: 2nd European Conference on Aero-Space Sciences (EUCASS). Von Karman Institute, BEL.
Liu, X.M. and Jones, F.R. and Thomason, J.L.; (2007) An XPS study of organosilane and sizing adsorption on e-glass fibre surface. In: Proceedings of the Sixteenth International Conference on Composite Materials (ICCM-16). Japan Society of Composite Materials.
Macdonald, Malcolm and Hughes, Gareth W. and McInnes, Colin and Lyngvi, Aleksander and Falkner, Peter and Atzei, Alessandro (2007) GeoSail : an elegant solar sail demonstration mission. Journal of Spacecraft and Rockets, 44 (4). pp. 784-796. ISSN 0022-4650
Rijal, Hom B. and Tuohy, Paul Gerard and Humphreys, Michael A. and Nicol, J. Fergus and Samuel, Aizaz and Clarke, Joseph Andrew (2007) Using results from field surveys to predict the effect of open windows on thermal comfort and energy use in buildings. Energy and Buildings, 39 (7). pp. 823-836. ISSN 0378-7788
Thomason, J.L. (2007) Editorial preface. Composite Interfaces, 14 (4). pp. 281-284. ISSN 0927-6440
Vasile, M. and De Pascale, Paolo and Casotto, Stefano (2007) On the optimility of a shape-based approach based on pseudo-equinoctial elements. Acta Astronautica, 61 (1-6). pp. 286-297. ISSN 0094-5765
Dachwald, Bernd and Mengali, Giovanni and Quarta, Alessandro A. and Macdonald, Malcolm and McInnes, Colin R. (2007) Optical solar sail degradation modelling. In: 1st International Symposium on Solar Sailing (ISSS 2007), 2007-06-27 - 2007-06-29.
Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2007) Three-dimensional laminar flow in square/square contractions. In: Congresso de Métodos Munéricos em Engenharia 2007, 2007-06-13 - 2007-06-15.
Vasile, Massimiliano and Ceriotti, Matteo and De Pascale, Paolo (2007) An incremental approach to the solution of global trajectory optimization problems. In: Advances in Global Optimization: Methods and Applications, 2007-06-13 - 2007-06-17.
Pogula, Suvarchala Devi and Patwardhan, Siddharth V. and Perry, Carole C. and Gillespie, John W. and Yarlagadda, Shridhar and Kiick, Kristi L. (2007) Continuous silica coatings on glass fibers via bioinspired approaches. Langmuir, 23 (12). pp. 6677-6683. ISSN 0743-7463
Biggs, James and Holderbaum, William and Jurdjevic, Velimir (2007) Singularities of optimal control problems on some six dimensional Lie groups. IEEE Transactions on Automatic Control, 52 (6). pp. 1027-1038. ISSN 0018-9286
Reese, Jason M. and Zheng, Yunlong and Lockerby, Duncan A. (2007) Computing the near-wall region in gas micro- and nanofluidics : critical Knudsen layer phenomena. Journal of Computational and Theoretical Nanoscience, 4 (4). pp. 807-813. ISSN 1546-1955
Gorman, Daniel G. and Horáček, J. (2007) Analysis of the free vibration of a coupled plate/fluid interacting system and interpretation using sub-system modal energy. Engineering Structures, 29 (5). pp. 754-762. ISSN 0141-0296
Badawy, A. and McInnes, C.R. (2007) Free flyer manoeuvring round a space station. In: 12th International Conference on Aerospace Sciences & Aviation Technology, 2007-05-29 - 2007-05-31.
Pang, Y. and Spathopoulos, M.P. and Xia, H. (2007) Reachability and optimal control for linear hybrid automata: a quantifier elimination approach. International Journal of Control, 80 (5). pp. 731-748. ISSN 0020-7179
Li, Y. and Wilson, J.A. and Craven, A.J. and Mitchell, P.S. and Crowther, D. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure. Materials Science and Technology, 23 (5). pp. 509-518. ISSN 0267-0836
Mabrouk, M. H. and McInnes, C.R. (2007) Swarm robot social potential fields with internal agent dynamics. In: 12th International Conference on Aerospace Sciences and Aviation Technology, ASAT-12, 2007-05-29 - 2007-05-31.
Thomason, J.L. (2007) Structure-property relationships in glass reinforced polyamide, part 2: The effects of average fiber diameter and diameter distribution. Polymer Composites, 28 (3). pp. 331-343. ISSN 0272-8397
Thomason, J.L. (2007) Structure-property relationships in glass-reinforced polyamide, Part 3: Effects of hydrolysis ageing on the dimensional stability and performance of short glass-fiber-reinforced polyamide 66. Polymer Composites, 28 (3). pp. 344-354. ISSN 0272-8397
Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, 23 (5). pp. 519-527. ISSN 0267-0836
Mridha, S. and Baker, T.N. (2007) Incorporation of 3 μm SiCp into Titanium surfaces using a 2.8 kW laser beam of 186 and 373 MJ m-2 energy densities in a nitrogen environment. Journal of Materials Processing Technology, 185 (1-3). pp. 38-45. ISSN 0924-0136
Flannigan, A. and Offord, S.J.J. and Orr, S.W. and Wheel, Marcus (2007) Mechanical testing of wood-glass composite mast sections. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (2). pp. 45-52. ISSN 1464-4207
Jones, F.R. and Thomason, J.L. and Liu, X.M.; (2007) The differential adsorption of silanes from solution onto model E-glass surfaces using high resolution XPS. In: Silanes and Other Coupling Agents. VSP International Science Publishers, pp. 29-37. ISBN 9789067644525
Liu, X.M. and Thomason, J.L. and Jones, F.R.; Mittal, Kash L., ed. (2007) Differentiation of silane adsorption onto model E-glass surfaces from mixed solutions of amino and glycidyl silanes. In: Silanes and Other Coupling Agents. VSP International Science Publishers, pp. 17-28. ISBN 9789067644525
Liu, X.M. and Thomason, J.L. and Jones, F.R.; (2007) The interaction of amino and glycidyl silanes with E-glass surfaces. In: Silanes and other coupling agents. VSP. ISBN 978-9067-64452-5
Lorentzon, U. and Bolmsjo, G. and Doyle, M.J. and Carus, D. (2007) MAGIC-HAND: A bottle and jar opening machine for people with severe disabilities. Mechatronics, 6 (2). pp. 79-88. ISSN 0957-4158
Madhlopa, A. and Ngwalo, G. (2007) Solar dryer with thermal storage and biomass-backup heater. Solar Energy, 81 (4). pp. 449-462. ISSN 0038-092X
Gray, T.G.F. and Wood, J. (2007) Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 433-446. ISSN 0309-3247
Clarke, J. A. and Connor, G and Grant, A. D. and Johnstone, C. M. (2007) Design and testing of a contra-rotating tidal current turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (A2). pp. 171-179. ISSN 0957-6509
Loutzenhiser, P.G. and Manz, H. and Felsmann, C. and Strachan, P.A. and Frank, T. and Maxwell, G.M. (2007) Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation. Solar Energy, 81 (2). pp. 254-267. ISSN 0038-092X
Camilleri, D. and Naruse, T. and Mackenzie, D. (2007) Gross plastic deformation of a hemispherical head with cylindrical nozzle: a comparative study. In: Pressure Vessel Technologies for the Power and Process Industries (PVP2007/CREEP8), 2007-07-01.
Camilleri, D. and Naruse, T. and Mackenzie, D.; (2007) An investigation of allowable static loads calculated by design by analysis. In: Proceedings of the ASME Pressure Vessels and Piping Conference. ASME. ISBN 0791842800
Wood, J. (2007) Stresses in the vicinity of an un-reinforced mitre intersection: an experimental and finite element comparison. Journal of Strain Analysis for Engineering Design, 42 (5). pp. 325-335. ISSN 0309-3247
Sanchez Cuartielles, Joan Pau and Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco; Belbruno, Edward, ed. (2007) A multi-criteria assessment of deflection methods for dangerous NEOs. In: New Trends in Astrodynamics and Applications III. AIP Conference Proceedings, 886 (317). American Institute of Physics/Springer Verlag, New York, pp. 317-336. ISBN 978-0-7354-0389-5
Loutzenhiser, P.G. and Manz, H. and Felsmann, C. and Strachan, P.A. and Maxwell, G.M. (2007) An empirical validation of modelling solar gain through a glazing unit with external and internal shading screens. Applied Thermal Engineering, 27 (2-3). pp. 528-538. ISSN 1359-4311
McConnell, B.K. and Banks, W.M. and Doyle, G.T. and Hayward, D. and Pethrick, R.A. (2007) Ageing in non isothermal environments of adhesively bonded metal structures. In: 30th Annual Meeting of the Adhesion Society, 2007-02-01 - 2007-02-01.
McKinley, G.H. and Rodd, Lucy E. and Oliveira, Monica and Cooper-White, J.J. (2007) Extensional flows of polymer solutions in microfluidic converging/diverging geometries. Journal of the Central South University of Technology, 14 (1-Supp). p. 6. ISSN 2095-2899
O'Hare, Lynne and Lockerby, Duncan A. and Reese, Jason and Emerson, David (2007) Near-wall effects in rarefied gas micro-flows : Some modern hydrodynamic approaches. International Journal of Heat and Fluid Flow, 28 (1). pp. 37-43. ISSN 0142-727X
McIvor, A.J. and Johnston, R. (2007) Miner's lung : a history of coal dust disease in Britain. Studies in Labour History . Ashgate. ISBN 0754636739
Zhang, Y. H. and Gu, X.J. and Barber, R. W. and Emerson, D. R. (2007) Modelling thermal flow in a transition regime using a lattice Boltzmann approach. EPL: A Letters Journal Exploring the Frontiers of Physics, 77 (3). 30003.1-30003.5. ISSN 0295-5075
Ceriotti, M. and Croisard, Nicolas and Vasile, Massimiliano (2007) A non-deterministic planner for planetary rovers. In: International Joint Conference on Artificial Intelligence (IJCAI), 2007-01-06 - 2007-01-12.
Croisard, Nicolas and Ceriotti, M. and Vasile, Massimiliano (2007) Uncertainty modelling in reliable preliminary space mission design. In: International Joint Conference on AI (IJCAI), 2007-01-06 - 2007-01-12.
Stickland, M.T. and Scanlon, T.J. and McKenzie, J. (2007) An experimental investigation of natural convection with solidification in a differentially heated cavity. International Journal of Heat and Mass Transfer, 50 (1-2). pp. 36-44. ISSN 0017-9310
Thomason, J.L. (2007) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 7. interface strength and fibre strain in injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 210-216. ISSN 1359-835X
Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, Colin; (2007) Swarm potential fields with internal agent states and collective behaviour. In: Proceedings of the 10th British Conference on Mobile Robotics, Towards Autonomous Robotic Systems Conference, TAROS2007. Elsevier Science, pp. 90-96.
Affrossman, S. and Banks, W.M. and Comrie, R. and Hayward, D. and Pethrick, R.A.; (2007) Dielectric analysis of ageing structural adhesives. In: Proceedings of the 30th Annual Meeting of the Adhesion Society. Adhesion Society.
Baker, P.H. and Bailly, D. and Campbell, M. and Galbraith, G.H. and McLean, R.C. and Poffa, N. and Sanders, C.H. (2007) The application of x-ray absorption to building moisture transport studies. Measurement, 40 (9-10). pp. 951-959. ISSN 1873-412X
Banks, W.M. and Hayward, D. and Pethrick, R.A. (2007) Non destructive examination of composite structures using dielectric examination. In: 16th International Conference on Composite Materials, 2011-07-20.
Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D. and Pham, X.P. (2007) Investigation into wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). pp. 233-242. ISSN 0957-6509
Choi, W. and Kim, Jae Min (2007) A study on the thermal modelling method of the under-floor heating system in apartment. Journal of the Architectural Institute of Korea Planning and Design, 23. pp. 175-184. ISSN 1226-9093
Clarke, J. A. and Connor, G. and Grant, A. D. and Johnstone, C. M. and Mackenzie, D.; (2007) Development of a contra-rotating tidal current turbine and analysis of performance. In: Proceedings of the 7th european wave and tidal energy conference. EWTEC, Southampton. ISBN 9789899507937
Clarke, Joseph Andrew and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2007) Energy and carbon performance of housing : upgrade analysis, energy labelling and national policy development. In: Scottish Energy Systems Group Conference, 2007-07-03.
Clarke, J.A. and Hand, J. and Kim, J.M. and Prazeres, L.M.R. (2007) Delivering building simulation information via new communication media. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.
Dachwald, Bernd and Macdonald, M. and McInnes, Colin (2007) Heliocentric solar sail orbit transfers with locally optimal control laws. Journal of Spacecraft and Rockets, 44 (1). pp. 273-276. ISSN 0022-4650
David-West, O.S. and Nash, D.H. and Banks, W.M. (2007) A study of repeated impact loading on a symmetrical carbon fibre laminate. In: 16th International Conference on Composite Materials, 2011-07-20.
Gislason, M.K. and Kanellopoulos, A. and Barnes, R. and Nash, D.H. (2007) The effect of anatomical variations on the load transfer characteristics of the wrist during gripping. In: XI Congress of the Federation of the European Societies for Surgery of the Hand, 2006-06-28 - 2006-06-30.
Gislason, M.K. and Nash, D.H. and BARNES, R.; Lennon, A.B. and Prendergrast, P.J. and Lennon, A.B. and Prendergrast, P. J., eds. (2007) On the creation of a subject specific finite element model of the wrist joint. In: Proceedings of the 2007 Summer Workshop of the European Society of Biomechanics. Dublin: Trinity Centre for Bioengineering, pp. 122-124. ISBN 095485831X
Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2007) Testing GNC technologies for planetary landing on Mars and Moon analogues. In: 2nd International Workshop on Exploring Mars and its Earth Analogues, 2007-06-01.
Heim, Dariusz and Klemm, Piotr and Strachan, Paul (2007) The effect of external surface properties on the thermal behaviour of a transparently insulated wall. In: Proceedings of Building Simulation 2007, 2007-09-03 - 2007-09-06.
Heiyantuduwa, M.A. and Kotelko, Maria and Rhodes, James and Macdonald, Martin (2007) Plastic mechanism approach to web crippling behaviour of cold-formed channel section beams. In: 6th International Conference on Steel and Aluminium Structures, ICSAS 07, 2007-07-18.
Heiyantuduwa, M.A. and Macdonald, Martin and Rhodes, James (2007) Web crippling behaviour of thin-walled flexural members - an experimental investigation. In: 6th International Conference on Steel and Aluminium Structures, ICSAS 07, 2007-07-18.
Johnstone, Cameron and Wallace, R. (2007) Guest editorial article. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). i-iii. ISSN 0957-6509
Kokogiannakis, G. and Strachan, P.A.; Santamouris, M. and Wouters, P., eds. (2007) Modelling of double ventilated facades according to CEN Standard 13790 method and detailed simulation. In: Proceedings of Building Low Energy Cooling and Advanced Ventilation Technologies in the 21st century, 2nd PALENC Conference and 28th AIVC Conference. Heliotopos Conferences. ISBN 9789606746024
Kokogiannakis, Georgios and Clarke, Joseph Andrew and Strachan, Paul (2007) Impact of using different models in practice - a case study with the simplified methods of ISO 13790 standard and detailed modelling programs. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06.
Kotelko, Maria and Kowal-Michalska, K. and Rhodes, James (2007) Stability of structures. Thin-Walled Structures, 45 (10-11). p. 809. ISSN 0263-8231
Kummert, M. and Dempster, W.M. (2007) Norwich Union Data Centre 3 - Transient thermal analysis of the chilled water hydraulic network and the impact of chilled water temperature disturbances on the IT environment. Norwich Union.
Lappas, Vaios and Wie, Bong and McInnes, C.R. and Tarabini, L. and Wallace, K. (2007) Microsolar sails for Earth magnetotail monitoring. Journal of Spacecraft and Rockets, 44 (4). pp. 840-848. ISSN 0022-4650
Li, Hongjun and Johnston, Richard and Mackenzie, Donald; (2007) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. ASME, pp. 11-17. ISBN 0-7918-4283-5
Li, Hongjun and Mackenzie, Donald; Kisisel, IT, ed. (2007) Coupled thermo-mechanical modelling of friction stir welding. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. Proceedings of the ASME Pressure Vesels and Piping Conference, 5 . American Society of Mechanical Engineers, USA, pp. 193-201. ISBN 9780791842836
Lockerby, Duncan A. and Struchtrup, Henning and Reese, J.M. (2007) High-order switching criteria for hybrid continuum-molecular micro gas flow solvers. In: 16th Discrete Simulation of Fluid Dynamics Meeting: Micro, Nano and Multiscale Physics for Emerging Technologies, 2007-07-01.
MacKenzie, P.M. (2007) Moiré interferometry applied to fracture in titanium tubes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (3). pp. 131-141. ISSN 1464-4207
MacKenzie, P.M. and Walker, C.A. and McKelvie, J.K. (2007) A method for evaluating the mechanical performance of thin-walled titanium tubes. Thin-Walled Structures, 45 (4). pp. 400-406. ISSN 0263-8231
MacLeod, N.A. and Fowler, N.K. and Nash, D.H.; (2007) Kinematic response of the wrist and forearm when subjected to a complex loading regime. In: Proceedings of the Fifth IASTED International Conference on Biomedical Engineering. ACTA Press, pp. 244-248. ISBN 9780889866485
Macdonald, M. and McInnes, C.R. and Dachwald, Bernd (2007) Impact of optical degredation on solar sail mission performance. Journal of Spacecraft and Rockets, 44 (4). pp. 740-749. ISSN 0022-4650
Macdonald, Martin and Rhodes, James and Heiyantuduwa, M.A. (2007) Investigation of web crippling behaviour of thin-walled lipped channel beam members. In: 3rd International Conference on Structural Engineering, Mechanics and Computation, 2007-07-06.
Macpherson, G.B. and Reese, J.M. (2007) Parallel evaluation of pair forces for molecular dynamics in arbitrary geometries. In: 10th NSTI Nanotech Conference, 2007-05-01.
Maddock, Christie and Sanchez Cuartielles, Joan-Pau and Vasile, Massimiliano and Radice, Gianmarco; (2007) Comparison of single and multi-spacecraft configurations for NEA deflection by solar sublimation. In: New trends in Astrodynamics and Applications III. American Institute of Physics, USA, pp. 303-316. ISBN 9780935403895
Malinowski, P. and Wandowski, T. and Trendafilova, I. and Ostachowicz, Wieslaw (2007) Multi-phased array for damage localisation. Key Engineering Materials, 347. pp. 77-82. ISSN 1013-9826
McInnes, C.R. (2007) Near Earth object modification using gravitational coupling. Journal of Guidance, Control and Dynamics, 30 (3). pp. 870-873. ISSN 1533-3884
McInnes, C.R. (2007) Vortex formation in swarms of interacting particles. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 75 (3). 032904-032907. ISSN 2470-0053
McLean, R.C. and Danert, K. and Morrison, S.J. and Galbraith, G.H. (2007) Hot occupational exposures: a corrected maximum exposure period to allow for sweating onset. Building Services Engineering Research and Technology, 28 (2). pp. 183-188. ISSN 0143-6244
Mizzi, Simon and Barber, Robert W. and Emerson, David and Reese, Jason and Stefanov, Stefan (2007) A phenomenological and extended continuum approach for modelling non-equilibrium flows. Continuum Mechanics and Thermodynamics, 19 (5). pp. 273-283. ISSN 0935-1175
Mizzi, Simon and Emerson, David R. and Stefanov, Stefan K. and Barber, Robert W. and Reese, Jason M. (2007) Effects of rarefaction on cavity flow in the slip regime. Journal of Computational and Theoretical Nanoscience, 4 (4). pp. 817-822. ISSN 1546-1955
O'Hare, L. and Reese, J.M. (2007) Numerical models of gas flow and heat transfer in microscale channels: capturing rarefaction behaviour using a constitutive scaling approach. In: 5th International Conference on Nanochannels, Microchannels and Minichannels, 2007-06-18 - 2007-06-20.
Osman, M. and Engler, O. and Karhausen, K. and Löchte, L. and McLaren, A. J. (2007) Effect of homogenisation conditions on recrystallisation in the Al-Mg-Mn alloy AA5454. Materials Science and Technology, 23 (6). pp. 688-698. ISSN 0267-0836
Ponter, Alan R.S. and Chen, Haofeng (2007) Modelling of the behaviour of a welded joint subjected to reverse bending moment at high temperature. Journal of Pressure Vessel Technology, 129 (2). pp. 254-261. ISSN 0094-9930
Prazeres, L.M.R. and Clarke, Joseph Andrew and Hand, Jon and Kim, Jae Min; Jiang, Y and Zhu, Y.X. and Yang, X.D. and Li, X.T., eds. (2007) Delivering building simulation information via new communication media. In: Building simulation 2007 proceedings. Tsinghua University Press, CHN. ISBN 9780977170630
Reese, J.M. (2007) Beyond Navier-Stokes: constructing hydrodynamic models to capture unusual rarefied gas flow phenomena. In: 6th International Congress on Industrial and Applied Mathematics, 2007-07-01.
Reese, J.M. and Lockerby, Duncan A. (2007) Near-wall scaling of the Navier-Stokes constitutive relations of accurate micro gas flow simulations. In: 5th International Conference on Nanochannels, Microchannels and Minichannels, 2007-06-18 - 2007-06-20.
Reid, J. and Macdonald, M. and Milic, E. and Ortega, G. and Blasco, A. (2007) Development of an end-to-end simulation for re-usable launch vehicle. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.
Riga, L. and Kennedy, J.; (2007) American idealpolitik and realpolitik in south-eastern Europe, 1919 and 1945. In: Order and Chaos? European Interventions in the Balkans. UNSPECIFIED.
Rijal, Hom B. and Tuohy, Paul Gerard and Nicol, J. Fergus and Humphreys, Michael A. and Clarke, Joseph Andrew (2007) A window opening algorithm and UK office temperature field results and thermal simulation. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06.
Samuel, A.A.A. and Hand, J. (2007) CFD assessments within strongly transient domains. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06.
St. John-Olcayto, E. and McInnes, C.R. and Ankersen, F. (2007) Safety-critical autonomous spacecraft proximity operations via potential function guidance. In: AIAA Infotech@Aerospace 2007 Conference and Exhibition, 2007-05-07 - 2007-05-10.
Stack, M.M. and Cann, P.M. (2007) A celebration of 25 years of the Tribology Group: From tribo-physics to tribo-chemistry - Guest Editorial. Journal of Physics D: Applied Physics, 40 (18). i-ii. ISSN 1361-6463
Strachan, P.A. and Kokogiannakis, G. and Macdonald, I. and Beausoleil-Morrison, I. (2007) Integrated comparative validation tests as an aid for building simulation tool users and developers. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions. ISSN 0001-2505
Thomason, J.L.; (2007) Interfaces and interfacial effects in glass reinforced thermoplastics - Keynote Presentation. In: Proceedings of the 28th Risø International Conference on Materials Science. Elsevier Science.
Thomason, Jim (2007) Composites and the industry/university interface. In: Composite Materials for Aerospace, Defence and Security Applications, 2007-12-05.
Tuohy, P. and Rijal, H. B. and Humphreys, M. A. and Nicol, J. F. and Samuel, A. and Clarke, J.; (2007) Comfort driven adaptive window opening behaviour and the influence of building design. In: Proceedings of Building Simulation 2007, 10th IBPSA Conference. IBPSA.
Waters, T. and McInnes, C.R. (2007) Periodic orbits above the ecliptic plane in the solar sail restricted 3-body problem. Journal of Guidance, Control and Dynamics, 30 (3). pp. 687-693. ISSN 1533-3884
Waters, Thomas and McInnes, C.R. (2007) Periodic orbits high above the ecliptic plane in the solar sail 3-body problem. In: AAS/AIAA Space Flight Mechanics Conference, 2007-01-28 - 2007-02-01.
2006
Manz, H. and Loutzenhiser, P. and Frank, T. and Strachan, P.A. and Bundi, R. and Maxwell, G. (2006) Series of experiments for empirical validation of solar gain modelling in building energy simulation codes - experimental setup, test cell characterization, specifications and uncertainty analysis. Building and Environment, 41 (12). pp. 1784-1797. ISSN 0360-1323
Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D and Pham, X.P. (2006) Wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (4). pp. 195-203. ISSN 1475-0902
Kelly, N.J. (2006) The role of energy efficiency in reducing Scottish and UK CO2 emissions. Energy Policy, 34 (18). pp. 3505-3515. ISSN 1873-6777
Camilleri, D. and Gray, T.G.F. and Mollicone, P. (2006) Computational methods and experimental validation of welding distortion simulation. In: Modelling of Manufacturing Processes Seminar, 2006-12-01.
Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2006) Alternative simulation techniques for distortion of thin plate due to fillet-welded stiffeners. Modelling and Simulation in Materials Science and Engineering, 14 (8). pp. 1307-1327. ISSN 0965-0393
McKinley, G.H. and Rodd, Lucy E. and Oliveira, Monica and Cooper-White, J.J. (2006) Extensional rheometry on a chip : Flows of dilute polymer solutions in microfluidic contractions. In: AIChE Annual Meeting 2006, 2006-11-12 - 2006-11-17.
Zheng, Yingsong and Reese, Jason and Struchtrup, Henning (2006) Comparing macroscopic continuum models for rarefied gas dynamics : a new test method. Journal of Computational Physics, 218 (2). pp. 748-769. ISSN 0021-9991
Camilleri, D. and Gray, T.G.F. (2006) Optimization of welded lightweight multiple-stiffener plate structures to minimise unwanted shape distortion. Welding and Cutting, 7 (6). pp. 320-327. ISSN 1612-3433
Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2006) Numerical and experimental investigation on the effects of tack welds on thin plate structures. In: Simulation Versus Testing, NAFEMS Workshop, 2006-11-08.
Vasile, Massimiliano and De Pascale, Paolo and Casotto, Stefano (2006) Optimal options for rendezvous and impact missions to NEOs. JBIS, Journal of the British Interplanetary Society, 59 (11). ISSN 0007-084X
Zhang, Wei and Ackemann, Thorsten and McGinily, Stephen and Schmid, Marc and Riis, Erling and Ferguson, Allister I. (2006) Operation of an optical in-well-pumped vertical-external-cavity surface-emitting laser. Applied Optics, 45 (29). pp. 7729-7735. ISSN 1559-128X
Ceriotti, M. and Colombo, C. and Vasile, M. (2006) Trajectory design and optimisation for lunar transfer. In: 1st Hellenic-European Student Space Science and Technology Symposium, 2006-10-09 - 2006-10-11.
Badawy, Ahmed and McInnes, Colin (2006) Autonomous structure assembly using potential field functions. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.
Ceriotti, Matteo and Vasile, Massimiliano and Giardini, Giovanni and Massari, Mauro (2006) Non deteriministic planning with evidence and paradoxical reasoning theories. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.
Colombo, Camilla and S. Cuartielles, Joan-Pau and Vasile, Massimiliano and Radice, Gianmarco (2006) A comparative assessment of different deviation strategies for dangerous NEO. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.
Walker, Colin and Ujihashi, Sadayuki, eds. (2006) Guest editorial article, special issue on sports engineering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). i-i. ISSN 1464-4207
Gray, T.G.F. and Camilleri, D. and Mollicone, P. (2006) Experimental validation of computational methods for welding distortion prediction. In: 22nd Symposium on Experimental Mechanics of Solids, 2006-10-18 - 2006-10-21.
Loutzenhiser, P.G. and Manz, H. and Strachan, P.A. and Felsmann, C. and Frank, T. and Maxwell, G.M. and Oelhafen, P. (2006) An empirical validation of modelling solar gains through a glazing unit using building energy simulation programs. HVAC and R Research, 12 (4). pp. 1097-1116. ISSN 1078-9669
Selamat, M.S. and Watson, L.M. and Baker, T.N. (2006) XRD and XPS studies of surface MMC layers developed by laser alloying Ti6Al4V using a combination of a dilute nitrogen environment and SiC powder. Surface and Coatings Technology, 201 (3-4). pp. 724-736. ISSN 0257-8972
Dachwald, Bernd and Mengali, Giovanni and Quarta, Alessandro A. and Macdonald, M. (2006) Parametric model and optimal control of solar sails with optical degradation. Journal of Guidance, Control and Dynamics, 29 (5). pp. 1170-1178. ISSN 1533-3884
Macdonald, Malcolm and Hughes, Gareth W. and McInnes, Colin R. and Lyngvi, Aleksander and Falkner, Peter and Atzei, Alessandro (2006) Solar polar orbiter : a solar sail technology reference study. Journal of Spacecraft and Rockets, 43 (5). pp. 960-972. ISSN 0022-4650
Thomason, Jim (2006) Making the University-Industry interface work. In: Ceramics and Composites Laboratory Industrial Forum Meeting, 2006-09-07. (Unpublished)
Reese, Jason and Zheng, Yingsong and Lockerby, Duncan A. (2006) Computing the near-wall region in gas micro- and nanofluidics : critical Knudsen layer phenomena. In: European Conference on Computational Fluid Dynamics, 2006-09-05 - 2006-09-08.
Cockroft, J. and Kelly, N.J. (2006) A comparative assessment of future heat and power sources for the UK domestic sector. Energy Conversion and Management, 47 (15-16). pp. 2349-2360. ISSN 0196-8904
Robertson, A.C. and Taylor, Ian; Taylor, Taylor, Ian J. and Vezza, Vessa, M., eds. (2006) Numerical analysis of forced oscillations of a circular cylinder using a discrete vortex method. In: Proceedings of the 7th UK Conference on Wind Engineering. University of Strathclyde, Glasgow, pp. 135-138. ISBN 9780955357107
Antonov, Maksim and Stack, Margaret and Hussainova, Irina (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian Academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1736-7530
Bezyrtzi, Georgia and Strachan, Paul and Simpson, Ross and Shanks, Robert (2006) Estimation of the carbon footprint of student halls of residence in the University of Strathclyde. WSEAS Transactions on Environment and Development, 2 (9). pp. 1152-1156. ISSN 1790-5079
Rhodes, James and Kotelko, Maria (2006) Behaviour of cold-formed stainless steel stub columns under bending and axial loading. In: 11th Symposium on Stability of Structures, 2006-09-11 - 2006-09-15.
Badawy, Ahmed and McInnes, Colin (2006) Separation distance for robot motion control using superquadratic obstacle potentials. In: International Control Conference 2006, 2006-08-30 - 2006-09-01.
Oliveira, Monica and Yeh, Roger and McKinley, G.H. (2006) Iterated stretching, extensional rheology and formation of beads-on-a-string structures in polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 137 (1-3). pp. 137-146. ISSN 0377-0257
Ceriotti, Matteo and Vasile, Massimiliano and Giardini, Giovanni and Massari, Mauro (2006) A non-deterministic planner for planetary rover autonomy. In: AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 2006-08-21 - 2006-08-24.
Camilleri, Duncan and Hamilton, Robert and Mackenzie, Donald (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247
Lappas, Vaios and Wie, Bong and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K. (2006) Solar kites for Earth magneto-tail monitoring. In: ESA Workshop on Innovative Systems Concepts, 2006-02-21.
Liu, X.M. and Thomason, J.L. and Jones, F.R. (2006) Differentiation of silane adsorption onto model E-glass surfaces from mixed solutions of amino and glycidyl silanes. In: 12th European Conference on Composite Materials, 2006-08-29 - 2006-09-01.
Madhlopa, A. (2006) Solar radiation climate in Malawi. Solar Energy, 80 (8). pp. 1055-1057. ISSN 0038-092X
Madhlopa, A. and Mgawi, R. and Taulo, J. (2006) Experimental study of temperature stratification in an integrated collector-storage solar water heater with two horizontal tanks. Solar Energy, 80 (8). pp. 989-1002. ISSN 0038-092X
Thomason, J.L. (2006) Structure-property relationships in glass reinforced polyamide: The effects of average fibre diameter and diameter distribution. In: 12th European Conference on Composite Materials, ECCM 12, 2006-08-29 - 2006-09-01. (Unpublished)
Thomason, J.L. (2006) Structure-property relationships in glass-reinforced polyamide, part 1: The effects of fiber content. Polymer Composites, 27 (5). pp. 552-562. ISSN 0272-8397
Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Evaluating plastic loads in torispherical heads using a new criterion of collapse. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.
Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Shakedown of a thick cylinder with a radial crosshole. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.
Méolens, J. Gilbert and Dadzie, S. Kokou (2006) Wall temperature jump in polyatomic gas flows. In: 25th International Symposium on Rarefied Gas Dynamics, 2006-07-21 - 2006-07-28.
Bourgeois, D. and Reinhart, C. and Macdonald, I. (2006) Adding advanced behavioural models in whole building energy simulation: A study on the total energy impact of manual and automated lighting control. Energy and Buildings, 38 (7). pp. 814-823. ISSN 0378-7788
Chen, H. F. and Ponter, Alan R.S. and Specchia, G. and Ciavarella, M. (2006) Shakedown analysis for rolling and sliding contact problems. International Journal of Solids and Structures, 43 (14-15). pp. 4201-4219. ISSN 0020-7683
Li, H. and Mackenzie, D. (2006) Plastic collapse analysis of pipe bends under out-of-plane moment and internal pressure loading DBA. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.
Myong, R.S. and Lockerby, Duncan A. and Reese, J.M. (2006) The effect of gaseous slip on microscale heat transfer: an extended Graetz problem. International Journal of Heat and Mass Transfer, 49 (15-16). pp. 2502-2513. ISSN 0017-9310
Samuel, A.A.A. and Strachan, P.A. (2006) An integrated approach to indoor contaminant modelling. HVAC and R Research, 12 (3a). pp. 599-619. ISSN 1078-9669
Vasile, Massimiliano and De Pascale, Paolo (2006) Preliminary design of multiple gravity-assist trajectories. Journal of Spacecraft and Rockets, 43 (4). pp. 794-805. ISSN 0022-4650
Madhlopa, A. (2006) Study of diurnal production of distilled water by using solar irradiation distribution about solar noon. In: EuroSun 2006 International Renewable Energy Conference, 2006-06-27 - 2006-06-30.
Oliveira, Monica and Alves, M.A. and McKinley, G.H. and Pinho, F.T. (2006) Extensional flow of dilute and semi-dilute solutions of polyethylene oxide through microfabricated hyperbolic contractions. In: 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2006-06-26 - 2006-06-29.
Macpherson, G.B. and Reese, J.M.; (2006) Molecular dynamics for near surface flows in nano liquid and micro gas systems. In: Proceedings of Fourth International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96170. ISBN 0791837785
Stack, M.M. and Abd El-Badia, T.M.; (2006) Mapping the effects of slurry concentration, velocity and electrochemical potential on the erosion-corrosion of WC/Co-Cr thermally sprayed coatings. In: Proceedings of the 12th Nordic Symposium on Tribology. DTU, Department of Mechanical Engineering, Lulea University of Technology, DNK. ISBN 87-90416-19-8
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Simple thermo-elastic-plastic models for welding distortion simulations. Journal of Materials Processing Technology, 176 (1-3). pp. 77-86. ISSN 0924-0136
Deans, J. and Neale, J.D. and Dempster, W.M. and Lee, C.K. (2006) The use of effectiveness concepts in the calculations of thermal resistance of parallel plate heat sinks. Heat Transfer Engineering, 27 (5). pp. 56-67. ISSN 0145-7632
McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Using finite element analysis to model the behaviour of an endovascular device - Poster Presentation. In: Proceedings of the UK Society for Biomaterials Conference, 2006-06-21 - 2006-06-22.
Ferguson, A. and Kelly, N.J. (2006) Modelling building-integrated stirling CHP systems. In: eSim2006: Canadian Building Simulation Conference, 2006-05-03 - 2006-05-05.
Baoyin, Hexi and McInnes, Colin (2006) Solar sail equilibria in the elliptical restricted three-body problem. Journal of Guidance, Control and Dynamics, 29 (3). pp. 538-543. ISSN 1533-3884
McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Development of a finite element model to analyse the proximal ring of an endovascular device. In: 2006 International ANSYS Conference, 2006-05-02 - 2006-05-04.
Turney, C.S.M. and Kershaw, A.P. and Lowe, J.J. and van der Kaars, S. and Johnston, James Rm and Rule, S. and Moss, P. and Radke, L. and Tibby, J. and McGlone, M.S. and Wilmshurst, J.M. and Vandergoes, M.J. and Fitzsimons, S.J. and Bryant, C. and James, S. and Branch, N.P. and Cowley, Joan and Kalin, Robert and Ogle, N. and Jacobsen, G. and Fifield, L.K. (2006) Climatic variability in the southwest Pacific during the Last Termination (20-10 kyr BP). Quaternary Science Reviews, 25 (9-10). pp. 886-903.
Oliveira, Monica and Alves, M.A. and McKinley, G.H. and Pinho, F.T. (2006) Extensional flow through microfabricated hyperbolic contractions. In: 3rd Annual European Rheology Conference, AERC 2006, 2006-04-27 - 2006-04-29.
Camilleri, D. and Mackenzie, D. and Hamilton, R.; Armstrong, Cecil, ed. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.
Camilleri, D. and Mollicone, P. and Comlekci, T. and Gray, T.G.F.; Armstrong, Cecil, ed. (2006) Computational methods for the prediction of out-of-plane deformation in thin plate welded structures. In: Computational Mechanics in the UK: Proceedings of a Joint Conference of The Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation. Queen's University Belfast, pp. 7-10.
Oliveira, Monica and Rodd, Lucy E. and McKinley, G.H. and Alves, M.A. (2006) Newtonian flow through a microscale contraction-expansion. In: CERC Young Chemist Workshop on Micro Reactor Technology, 2006-03-16 - 2006-03-18.
Trendafilova, I. (2006) Vibration-based damage detection in structures using time series analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (3). pp. 261-272. ISSN 0954-4062
Chen, Haofeng and Ponter, Alan R.S. (2006) Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading. International Journal for Numerical Methods in Engineering, 68 (1). pp. 13-32. ISSN 0029-5981
Baoyin, Hexi and McInnes, Colin R. (2006) Solar sail halo orbits at the Sun-Earth artificial L1 point. Celestial Mechanics and Dynamical Astronomy, 94 (2). pp. 155-171. ISSN 0923-2958
Mackenzie, Donald and Li, Hongjun (2006) A plastic load criterion for inelastic design by analysis. Journal of Pressure Vessel Technology, 128 (1). pp. 39-45. ISSN 0094-9930
Pang, Y. and Spathopoulos, M.P. and Xia, H. (2006) Suboptimal target control for hybrid automata using model predictive control. Nonlinear Analysis: Theory, Methods and Applications, 65 (6). pp. 1211-1230. ISSN 0362-546X
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Thermal distortion of stiffened plate due to fillet welds : computational and experimental investigation. Journal of Thermal Stresses, 29 (2). pp. 111-137. ISSN 0149-5739
Li, Hongjun and Mackenzie, Donald (2006) Characterising plastic collapse of pipe bend structures. International Journal of Pressure Vessels and Piping, 83 (2). pp. 85-95. ISSN 0308-0161
Baker, P.H. and Galbraith, G.H. and Sanders, C.H. and McLean, R.C. (2006) The development of instrumentation for the measurement of relative humidity within building microenvironments. Measurement, 39 (6). pp. 565-574. ISSN 1873-412X
Rhodes, J. (2006) Rolf Baehre 28/02/1928 - 09/06/2005 - a personal report. Thin-Walled Structures, 44 (1). p. 1. ISSN 0263-8231
Abid, Muhammad and Nash, David (2006) Relaxation behaviour of a gasketed and non-gasketed bolted flanged pipe joint - A comparative study. WSEAS Transactions on Applied and Theoretical Mechanics, 1 (2). pp. 239-246. ISSN 1991-8747
Abid, Muhammad and Nash, David (2006) Structural strength: gasketed Vs non-gasketed flange joint under bolt up and operating condition. International Journal of Solids and Structures, 43 (14-15). pp. 4616-4629. ISSN 0020-7683
Aziz, A. and Rhodes, J. and Macdonald, M. and Nash, D.H.; (2006) A detailed examination of interactive buckling in plain channel sections. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.
Baker, P.H. and Galbraith, Graham H. and McLean, R. Craig and Hunter, Colin and Sanders, C.H. (2006) The measurement and prediction of conditions within indoor microenvironments. Indoor and Built Environment, 15 (4). pp. 357-364. ISSN 1420-326X
Baoyin, Hexi and McInnes, Colin (2006) Trajectories to and from the Lagrange points and the primary body surfaces. Journal of Guidance, Control and Dynamics, 29 (4). pp. 998-1003. ISSN 1533-3884
Biggs, J.D. and Holderbaum, William (2006) Integrating control systems defined on the frame bundles of the space forms. In: 45th IEEE Conference on Decision and Control, 2006-12-13 - 2006-12-15.
Biggs, James and Holderbaum, William (2006) The geometry of optimal control problems on some six dimensional lie groups. In: 44th IEEE Conference on Decision and Control/European Control Conference, 2005-12-12.
Bookless, John and McInnes, Colin (2006) Dynamics and control of displaced periodic orbits using solar sail propulsion. Journal of Guidance, Control and Dynamics, 29 (3). pp. 527-537. ISSN 1533-3884
Bradley, G R and MacKenzie, P M (2006) Development of a novel metastable composite material. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). pp. 181-187. ISSN 1464-4207
Carus, D. and Grant, C. and Wattie, R. and Pridham, M.S. (2006) Development and validation of a technique to measure and compare the opening characteristics of tamper-evident bottle closures. Packaging Technology and Science, 19 (2). pp. 105-118. ISSN 0894-3214
Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 123-135. ISSN 0308-0161
Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 136-147. ISSN 0308-0161
Chen, J.F. and Pan, W. (2006) Three dimensional stress distribution in FRP-to-concrete bond test specimens. Construction and Building Materials, 20 (1-2). pp. 46-58. ISSN 0950-0618
Clarke, J. and Hong, J. and Kim, J. and Strachan, P. and Hwang, I. and Li, H. (2006) A strategic study of energy efficient and hybrid energy system options for a multi-family building in Korea. In: EuroSun 2006 International Renewable Energy Conference, 2006-06-27 - 2006-06-30.
Clarke, J. A. and Macdonald, I. A. and Nicol, J. F.; (2006) Predicting adaptive responses - simulating occupied environments. In: Proceedings of international comfort and energy use in buildings conference. Network for Comfort and Energy Use in Buildings (NCEUB), GBR.
Clarke, Joseph Andrew; (2006) Trends in building energy modelling and simulation. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671
Clarke, Joseph Andrew and Grant, Andrew and Connor, Gary and Johnstone, Cameron (2006) Regulating the output characteristics of tidal current power stations to facilitate better base load matching over the lunar cycle. Renewable Energy, 31 (2). pp. 173-180. ISSN 0960-1481
Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C.M.; (2006) Design and initial testing of a contra-rotating tidal current turbine. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671
Dempster, W.M. and Lee, C.K. and Deans, J.; (2006) The prediction of the flow through safety relief valves. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping 2006. ASME. ISBN 0791847551
Essah, E.A. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C.; (2006) Airflow between houses and their roofs. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP). ISBN 0-415-41675-2
Galbraith, G.H. and Baker, P.H. and Bailly, D. and McLean, R.C.; (2006) An X-ray apparatus for advanced construction related moisture research. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. Engineering and Physical Sciences Research Council.
Galloway, A. and McPherson, Norman; (2006) Nitrogen retention/enrichment of 316LN austenitic steel welds. In: FabTech International Conference. Society of Manufacturing Engineers, pp. 281-283.
Galloway, A. and McPherson, Norman (2006) The effect of shielding gas composition on weld metal nitrogen retention in 316LN austenitic stainless steels. Welding and Cutting, 5 (4). pp. 225-230. ISSN 1612-3433
Galloway, Alexander M. and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic stainless steel welds. In: FabTech International Conference, 2011-06-20. (Unpublished)
Gorman, D. and Trendafilova, I. and Mulholland, A. and Horáček, J. (2006) Vibration of a coupled plate/fluid interacting system and its implication for modal analysis and vibration health monitoring. Applied Mechanics and Materials, 5-6. pp. 323-330. ISSN 1660-9336
Gray, T.G.F. (2006) Integration of case study technical investigations in honours/masters engineering courses. International Journal of Mechanical Engineering Education, 34 (4). pp. 315-329. ISSN 0306-4190
Gu, X.J. and Emerson, David and Barber, Robert W. and Zhang, Yonghao; (2006) Towards numerical modelling of surface tension of microdroplets. In: Parallel Computational Fluid Dynamics - Theory and Applications. Elsevier, pp. 365-373. ISBN 0-444-52206-9
Heiyantuduwa, M.A. and Macdonald, Martin and Rhodes, James; (2006) Investigation of web crippling behaviour using nonlinear finite element analysis. In: Proceedings of International Colloquium on Stability and Ductility of Steel Structures, SDSS'06, Lisbon, Portugal. Structural Stability Research Council (SSRC).
Hughes, Gareth W. and Macdonald, M. and McInnes, Colin (2006) Terrestrial planet sample return missions using solar sail propulsion. ESA European Space Agency Bulletin, 59 (8-11). pp. 797-806. ISSN 0376-4265
Hughes, Gareth W. and Macdonald, M. and McInnes, Colin and Lyngvi, A. and Falkner, P. and Atzei, A. (2006) Sample return from Mercury and other terrestrial planets using solar sail propulsion. Journal of Spacecraft and Rockets, 43 (4). pp. 828-835. ISSN 0022-4650
Israr, Asif and Cartmell, Matthew P. and Krawczuk, Marek and Ostachowicz, Wieslaw and Manoach, Emil and Trendafilova, I. and Shishkina, E.V. and Palacz, M. (2006) On approximate analytical solutions for vibrations in cracked plates. Applied Mechanics and Materials, 5-6. pp. 315-322. ISSN 1660-9336
Jiang, Jiaren and Stack, Margaret (2006) Modelling sliding wear: from dry to wet environments. Wear, 261 (9). pp. 954-965. ISSN 0043-1648
Jin, M.M. and Nash, D.H. and Banks, W.M.; (2006) Impact loading on symmetrical and unsymmetrical hybrid composite laminates. In: Proceedings of the 14th Annual International Conference on Composites/NanoEngineering. ICCE. ISBN 0-9533991-0-9
Johnstone, C. and Nielsen, K. and Lewis, T. and Sarmento, A. and Lemonis, G. (2006) EC FPVI Co-ordinated action on ocean energy: a European platform for sharing technical information and research outcomes in wave and tidal energy systems. Renewable Energy, 31 (2). pp. 191-196. ISSN 0960-1481
Kumaraperumal, A. and Baker, P.H. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C.; (2006) Comparison of measured and modelled driving rain data on a historic building with standard assessment methods. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP). ISBN 0-415-41675-2
Kummert, M. and Andre, P. and Argiriou, A.A. (2006) Comparing control strategies using experimental and simulation results: Methodology and application to heating control of passive solar buildings. HVAC and R Research, 12 (3a). pp. 715-737. ISSN 1078-9669
Kummert, M. and Bernier, M. (2006) Benny Farm - Simulation of the Hybrid Solar-GCHP-Boiler System. Other. IBPSA.
Kummert, M. and Bernier, M.; (2006) Sub-hourly simulation of residential ground coupled heat pump systems. In: Proceedings of the 7th International Conference on System Simulation in Buildings. University of Liege, pp. 34-46.
Kummert, M. and Bernier, M. and Roy, M.; (2006) Using simulation to validate and optimise the design of a hybrid solar-GCHP system. In: Proceedings of IBPSA-Canada's 4th Biennial Building Performance Simulation Conference (eSim 2006). IBPSA.
MacKintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2006) Influence of fillers on the relaxation characteristics and processing of polyurethane elastomers. In: 9th International ESAFORM Conference on Materials Forming, 2006-04-26 - 2006-04-28.
Macdonald, Martin and Heiyantuduwa, M.A. and Rhodes, James; (2006) Finite element analysis of web crippling behaviour of cold-formed steel flexural members. In: Proceedings of the 18th International Speciality Conference on Cold Formed Steel Structures. University of Missouri-Rolla.
McInnes, C.R.; Badescu, Viorel and Schuiling, Roelof D. and Cathcart, Richard B., eds. (2006) Planetary macro-engineering using orbiting solar reflectors. In: Macro-Engineering: A Challenge for the Future. Springer, pp. 215-250. ISBN 978-1-4020-3739-9
McInnes, C.R. and Davis, Chris (2006) The orbital siphon : A new space elevator concept. JBIS, Journal of the British Interplanetary Society, 59 (10). pp. 368-374. ISSN 0007-084X
McInnes, Colin and Cartmell, Matthew P.; (2006) Dynamics of propellantless propulsion systems. In: Dynamics of Propellantless Propulsion Systems. Elsevier Astrodynamics Book Series . Elsevier, pp. 189-235. ISBN 0-12-373562-9
McInnes, Colin and Hughes, Gareth W. and Macdonald, M.; (2006) High energy small body missions using solar sail propulsion. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484
McInnes, Colin and Hughes, Gareth W. and Macdonald, M.; (2006) Small bodies missions and technologies (part 2). In: Proceedings of the 56th International Astronautical Congress. Curran Associates, IAC-05. ISBN 9781604236484
McInnes, Colin R. and Davis, Chris; (2006) Novel payload dynamics on space elevator systems. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484
McLaren, A.J. (2006) Design and performance of ropes for climbing and sailing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 1-12. ISSN 1464-4207
Milne, K.A. and McLaren, A. J. (2006) An assessment of the strength of knots and splices used as eye terminations in a sailing environment. Sports Engineering, 9 (1). pp. 1-13. ISSN 1369-7072
Mizzi, Simon and Emerson, David and Barber, Robert W. and Reese, Jason; (2006) Modelling low Knudsen number transition flows using a computationally efficient continuum-based methodology. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006). ASME. ISBN 0791847608
Mizzi, Simon and Emerson, David R. and Stefanov, Stefan K. and Barber, Robert W. and Reese, Jason M. (2006) Micro-scale cavities in the slip - and transition - flow regimes. In: Computational Micro and Nanofluidics Conference (ECCOMAS CFD), 2006-09-01.
Mohr, S. and Zhang, Yonghao and MacAskill, Alexandra and Day, P.J.R. and Barber, Robert W. and Goddard, N.J. and Emerson, David and Fielden, P.R.; (2006) Optimal design and operation for a droplet-based PCR chip. In: Proceedings of ASME 4th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006). ASME.
O'Hare, L. and Scanlon, T.J. and Reese, J.M.; (2006) Gas flow through microscale orifice plates. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96193. ISBN 0791837785
Pan, W. and Leen, S.B. and Hyde, T.H. (2006) Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis. Computers and Structures, 84 (10-11). pp. 690-698. ISSN 0045-7949
Pang, Yan and Xia, Hao and Spathopoulos, Michael P.; (2006) Robust semi-explicit model predictive control for hybrid automata. In: Proceedings of International Conference on Computational Science and Its Applications. Lecture Notes in Computer Science . Springer. ISBN 3540340793
Phillipson, M.C. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C.; (2006) Climate change, hygrothermal modelling and the indoor environment. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP).
Picard, D. and Delisle, V. and Bernier, M. and Kummert, M.; (2006) On the combined effect of wastewater heat recovery and solar domestic hot water heating. In: Proceedings of the 31st Conference of the Solar Energy Society of Canada and 1st Canadian Solar Buildings Research Network Conference. International Solar Energy Society.
Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2006) Velocity effects of erosion-corrosion of CrN/Nb superlattice PVD coatings. Surface and Coatings Technology, 201 (1-2). pp. 361-370. ISSN 0257-8972
Qin, Rongshan and Zhang, Yonghao (2006) Lattice Boltzmann study of the effect of stirring on the migration rate of curved interfaces in binary slurries. Computers and Fluids, 35 (8-9). pp. 929-933. ISSN 0045-7930
Reese, J.M. (2006) Beyond Navier-Stokes: hydrodynamic models for rarefaction phenomena in micro scale gas flows. In: Microfluidique 2006, 3rd French Microfluidics Conference, 2006-12-01.
Reese, J.M. (2006) Hydrodynamic descriptions of curious non-equilibrium phenomena in hypersonic and microscale gas flows. In: 3rd International Conference for Mesoscopic Methods in Engineering and Science, 2006-07-25 - 2006-07-28.
Rhodes, J.; Shanmugam, N.E. and Wang, C.M., eds. (2006) Buckling and postbuckling behaviour of light gauge steel members. In: Analysis and Design of Plated Structures. Woodhead Publishing, p. 508. ISBN 1-85573-967-4
Rhodes, J. (2006) Some recent research on thin-walled members at the University of Strathclyde. In: 11th Symposium on the Stability of Structures, 2006-09-01.
Rhodes, J. and Burns, R.; (2006) Development of a portal frame system on the basis of component testing. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.
Scanlon, T.J. and Reese, J.M. and O'Hare, L.; (2006) A procedure for calculating wall distance in arbitrary geometrics. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96037. ISBN 0791837785
Spathopoulos, M.P.; (2006) Hybrid target control design. In: Proceedings of the International Conference on Hybrid Systems and Applications. Elsevier.
Stack, M.M. and Abd El-Badia, T.M. (2006) Mapping erosion-corrosion of WC/Co-Cr based composite coatings: Particle velocity and applied potential effects. Surface and Coatings Technology, 201 (3-4). pp. 1335-1347. ISSN 0257-8972
Stack, M.M. and Abd El-Badia, T.M. (2006) On the construction of erosion-corrosion maps for a WC/Co-Cr based coating in aqueous conditions. Wear, 261 (11-12). pp. 1181-1190. ISSN 0043-1648
Stack, Margaret and Antonov, Maksim and Hussainova, Irina (2006) Some views on the erosion-corrosion response of bulk chromium carbide based cermets. Journal of Physics D: Applied Physics, 39 (15). pp. 3165-3174. ISSN 1361-6463
Stefanov, Stefan and Barber, Robert W. and Emerson, David and Reese, Jason; (2006) The critical accommodation coefficient for velocity inversion in rarefied cylindrical Couette flow in the slip and near free-molecular regimes. In: Proceedings of the 25th International Symposium on Rarefied Gas Dynamics (RGD25). AIP.
Thomason, J.L. (2006) Structure-property relationships in glass reinforced polyamide - Influence of fibre length, diameter and concentration. In: 9th AVK-TV Conference, 2006-09-19 - 2006-09-20.
Trendafilova, I. and Manoach, Emil and Cartmell, Matthew P. and Krawczuk, Marek and Ostachowicz, Wieslaw and Palacz, M. (2006) On the problem for damage detection of vibrating cracked plates. Applied Mechanics and Materials, 5-6. pp. 247-254. ISSN 1660-9336
Tuohy, P. G. and Strachan, P. and Marnie, A. (2006) Carbon and energy performance of housing : a model and toolset for policy development applied to a local authority housing stock. In: EuroSun 2006 International Renewable Energy Conference, 2006-06-27 - 2006-06-30.
Tuohy, P.G. and Johnstone, C. and McElroy, L.B. (2006) Sustainable housing standards: use of simulation in design. In: EuroSun 2006 International Renewable Energy Conference, 2006-06-27 - 2006-06-30.
Ulleberg, O. and Ito, H. and Maack, M. and Ridell, B. and Miles, S. and Kelly, N.J. and Iacobazzi, A. (2006) Modelling and evaluation of hydrogen demonstration systems. In: 16th World Hydrogen and Energy Conference (WHEC), 2006-06-13 - 2006-06-16.
Walker, C.A. (2006) The effect of cyclic loading on the stiffness and damping factors in the midsoles of running shoes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 41-47. ISSN 1464-4207
Wood, J. (2006) CCOPPS: Certification of competencies in the power and pressure systems industry. In: Simulation of Power Generation Technology Seminar, 2006-09-27.
Zhang, Yonghao and Gu, X.J. and Barber, Robert W. and Emerson, David (2006) Capturing Knudsen layer phenomena using lattice Boltzmann model. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 74 (4). 046704. ISSN 2470-0053
Zhang, Yonghao and Reese, Jason and Scanlon, Thomas and Lockerby, Duncan A.; (2006) Scaled Navier-Stokes-Fourier equations for rarefied gas flow and heat transfer phenomena in micro- and nano-systems. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96066. ISBN 0791837785
2005
Zhang, Yonghao and Gu, Xiao-Jun and Barber, Robert W. and Emerson, David R. (2005) Influence of the electric double layer on induced pressure fields and development lengths in electro-osmotic flows. Modern Physics Letters B, 19 (28-29). pp. 1655-1658. ISSN 0217-9849
Dadzie, S. Kokou and Méolens, J. Gilbert (2005) Temperature jump and slip velocity calculations from an anisotropic scattering kernel. Physica A: Statistical Mechanics and its Applications, 358 (2-4). pp. 328-346. ISSN 0378-4371
Pang, Y. and Spathopoulos, M.P. (2005) Synthesis of controllers for target problems of hybrid systems using appropriate computation. International Journal of Control, 78 (18). pp. 1466-1485. ISSN 0020-7179
Camilleri, D. and Gray, T.G.F. (2005) Computationally efficient welding distortion simulation techniques. Modelling and Simulation in Materials Science and Engineering, 13 (8). pp. 1365-1382. ISSN 0965-0393
Chen, Haofeng and Ponter, Alan R.S. (2005) On the behaviour of a particulate metal matrix composite subjected to cyclic temperature and constant stress. Computational Materials Science, 34 (4). pp. 425-441. ISSN 0927-0256
Saliba, M.A. and Camilleri, D. and Farrugia, M.J. (2005) Development of an anthropomorphic robot hand and wrist for teleoperation applications. In: Proceedings of the IEEE International Conference on Information and Automation, 2005-12-15 - 2005-12-18.
Vijayakumar, G. and Kummert, M. and Klein, S.A. and Beckman, W.A. (2005) Analysis of short-term solar radiation data. Solar Energy, 79 (5). pp. 495-504. ISSN 0038-092X
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Design support tool for prediction of welding distortion in multiply-stiffened plate structures experimental and computational investigation. Journal of Ship Production, 21 (4). pp. 219-234. ISSN 8756-1417
Carus, D. (2005) Getting a grip. Packaging Professional, 28 (6). pp. 4-6. ISSN 1477-8467
Li, Y. and Baker, T.N. and Mitchell, P.S. (2005) Vanadium microalloyed steel for thin slab casting and direct rolling. Materials Science Forum, 500-501. pp. 237-244. ISSN 1662-9760
McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2005) Development of a preliminary finite element model to analyse the proximal ring of an endovascular device. In: UK ANSYS User Conference 2005, 2005-11-15 - 2005-11-16.
Ceriotti, Matteo and Colombo, Camilla and Scarì, Ettore and Vasile, Massimiliano (2005) Halo orbit determination in the mission analysis of the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21.
Colombo, Camilla and Ceriotti, Matteo and Scarì, Ettore and Vasile, Massimiliano (2005) Trajectory optimization for the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21.
Scarì, Ettore and Ceriotti, Matteo and Colombo, Camilla and Vasile, Massimiliano (2005) Mission analysis of Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21.
Oliveira, Monica and McKinley, G.H. (2005) Iterated stretching and multiple beads-on-a string phenomena in dilute solutions of highly-extensible flexible macromolecules. In: 77th Annual Meeting of the Society of Rheology, 2005-10-16 - 2005-10-20.
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computationally efficient welding simulation for out-of-plane distortion in double-sided fillet welding. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.
Li, H. and Mackenzie, D. (2005) Characterising gross plastic deformation in design by analysis. International Journal of Pressure Vessels and Piping, 82 (10). pp. 777-786. ISSN 0308-0161
Mollicone, P. and Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Thermo-elastic-plastic finite element models for gas-shielded metal-arc welding fabrication. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.
Nash, D.H. and Dempster, I. (2005) Modelling the sources of cracking of aircraft compressor vanes rings. Engineering Failure Analysis, 12 (5). pp. 699-710. ISSN 1350-6307
Zhang, Y. H. and Qin, R. S. and Sun, Y.H. and Barber, R. W. and Emerson, D. R. (2005) Gas flow in microchannels - a Lattice Boltzmann method approach. Journal of Statistical Physics, 121 (1-2). pp. 257-267. ISSN 0022-4715
Stack, Margaret and Jawan, H. and Mathew, M.T. and Mathew, Mathew T (2005) On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments. Tribology International, 38 (9). pp. 848-856. ISSN 0301-679X
Reese, Jason (2005) Nonlinear gas dynamics and the consequences of local thermodynamic disequilibrium. In: Recent advances in Nonlinear Mechanics, RANM2005, 2005-08-30 - 2005-09-01.
Myong, R.S. and Reese, Jason and Barber, Robert W. and Emerson, David (2005) Velocity slip in microscale cylindrical Couette flow: the Langmuir model. Physics of Fluids, 17 (8). 087105. ISSN 1070-6631
McKinley, G.H. and Rodd, Lucy E. and Oliveira, Monica and Cooper-White, J.J. (2005) Extensional flows of polymer solutions in microfluidic converging/diverging geometries. In: 4th Pacific-Rim Conference on Rheology, PRCR4, 2005-08-07 - 2005-08-11.
Bourgeois, D. and Reinhart, C. and Macdonald, I. (2005) Assessing the total energy impact of occupant behavioural response to manual and automated lighting systems. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18.
David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) Detecting the perforation threshold of curved symmetrical CFRP composite panels. In: The 12th International Conference on Composites and Nano Engineering (ICCE-12), 2005-08-01 - 2005-08-06.
Macdonald, I. and McElroy, L.B. and Hand, Jon and Clarke, Joseph Andrew (2005) Transferring simulation from specialists into design practice. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18.
Strachan, P.A. and Kokogiannakis, G. and Macdonald, I. (2005) Encapsulation of validation tests in the ESP-r simulation program. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18.
Oliveira, Monica and McKinley, G.H. (2005) Iterated stretching and multiple beads-on-a-string phenomena in dilute solutions of highly-extensible flexible polymers. Physics of Fluids, 17 (7). 071704. ISSN 1089-7666
Pang, Y. and Spathopoulos, M.P. (2005) Time optimal control systhesis for discrete time hybrid automata. International Journal of Control, 78 (11). pp. 847-863. ISSN 0020-7179
Greenshields, Christopher and Reese, Jason (2005) Some consequences of non-local-equilibrium in hypersonic aerodynamic flows. In: 1st European Conference for Aerospace Sciences, 2005-07-04 - 2005-07-07.
Mackenzie, D. and Li, H. (2005) A plastic load criterion for inelastic DBA. In: ASME Pressure Vessels and Piping Conference, 2005-07-17 - 2005-07-21.
Taylor, Ian and Vezza, M. and Salisbury, I (2005) A study into the performance of wind shields on both streamlined and bluff bridge deck sections. In: Fourth European and African Conference on Wind Engineering, 2005-07-11 - 2005-07-15.
Thomason, J.L. (2005) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 6. the properties of injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 36 (7). pp. 995-1003. ISSN 1359-835X
Carles, P. and Dadzie, K. (2005) Two typical time scales of the piston effect. Physical Review E, 71 (6). 066310. ISSN 2470-0053
Dadzie, K. and Meolans, J.G. (2005) Slip length and problem of anomalous velocity profiles. In: 4th AIAA Theoretical Fluid Mechanics Meeting, 2005-06-06 - 2005-06-09. (Unpublished)
David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: The 15th International Conference on Composite Materials, ICCM 15, 2005-06-27 - 2005-07-01.
David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE , ed. (2005) The effect of surface ply stiffness on the energy absorption of curved carbon fibre composites. In: 15th International Offshore and Polar Engineering Conference, 2005-06-19 - 2005-06-24.
Lockerby, Duncan A. and Reese, Jason M. and Gallis, Michael A. (2005) Capturing the Knudsen layer in continuum-fluid models of non-equilibrium gas flows. AIAA Journal, 43 (6). pp. 1391-1393. ISSN 0001-1452
Camilleri, D. and Comlekci, T. and Gray, T.G.F.; (2005) Finite element analysis of out-of-plane distortion in plates due to double-sided fillet-welded attachments. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005, Malta. NAFEMS, p. 88. ISBN 1-874376-03-4
Bloem, J.J. and Colli, A. and Strachan, P. (2005) Evaluation of PV technology implementation in the building sector. In: International Conference on Passive and Low Energy Cooling for the Built Environment, 2005-05-01.
Robertson, A.C. and Li, H. and Mackenzie, D. (2005) Plastic collapse of pipe bends under combined internal pressure and in-plane bending. International Journal of Pressure Vessels and Piping, 82 (5). pp. 407-416. ISSN 0308-0161
Zhang, Yonghao and Qin, Rongshan and Emerson, David (2005) Lattice Boltzmann simulation of rarefied gas flows in microchannels. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 71 (4). 047702. ISSN 2470-0053
Thomason, J.L. (2005) Structure-property relationships of thermoplastic composites - The role of fibre reinforcement. In: Thermoplastic Composite Molding, 2005-04-28 - 2005-04-29. (Unpublished)
Vasile, Massimiliano and Summerer, Leopold and De Pascale, Paolo (2005) Design of Earth-Mars transfer trajectories using evolutionary-branching technique. Acta Astronautica, 56 (8). pp. 705-720. ISSN 0094-5765
Oliveira, Monica and McKinley, G.H. (2005) Iterated stretching and multiple beads-on-a-string phenomena in dilute solutions of flexible macromolecules. In: Institute of Non-Newtonian Fluid Mechanics Conference on Extensional Flow, 2005-03-21 - 2005-03-23.
Méolens, J. Gilbert and Dadzie, S. Kokou (2005) Scattering kernel for polyatomic molecules. Journal of Mathematical Physics, 46 (6). 062101. ISSN 0022-2488
Abid, Muhammad and Nash, David (2005) FMEA of gasketed and non-gasketed bolted flanged pipe joints. Engineering Integrity, 17 (1). pp. 14-21. ISSN 1365-4101
Oliveira, Monica and Rodd, Lucy E. and McKinley, G.H. (2005) Extensional flow of dilute polymer solutions through microfabricated hyperbolic contractions. In: 76th Annual Meeting of the Society of Rheology, 2005-02-13 - 2005-02-17.
McLean, R.F. and Alsop, S. and Fleming, J.S. (2005) Nyquist - overcoming the limitations. Journal of Sound and Vibration, 280 (1-2). pp. 1-20. ISSN 0022-460X
Gray, T.G.F. (2005) Lorry loads of problems. Professional Engineering, 18 (2). p. 21. ISSN 0953-6639
Afendi, M. and Banks, W.M. and Kirkwood, D. (2005) Bubble free resin for infusion process. Composites Part A: Applied Science and Manufacturing, 36 (6). pp. 739-746. ISSN 1359-835X
Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computational prediction of out-of-plane welding distortion and experimental investigation - Awarded Central Electricity Generating Board Prize. Journal of Strain Analysis for Engineering Design, 40 (2). pp. 161-176. ISSN 0309-3247
Gorman, D. and Lee, C.K. and Reese, J.M. and Horáček, J. (2005) Vibration analysis of a thin circular plate influenced by liquid/gas interaction in a cylindrical cavity. Journal of Sound and Vibration, 279 (3-5). pp. 601-618. ISSN 0022-460X
Antonov, Maksim and Stack, M.M. and Hussainova, Irina (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07.
Blackburn, Steven and Nicol, Alexander and Walker, Colin (2005) Development of a biomechanically validated turf testing rig. In: XXth Congress of the International Society of Biomechanics, 2005-07-31 - 2005-08-05.
Boinard, P. and Banks, W.M. and Pethrick, R.A. (2005) Changes in the dielectric relaxations of water in epoxy resin as a function of the extent of water ingress in carbon fibre composites. Polymer, 46 (7). pp. 2218-2229. ISSN 0032-3861
Bookless, John and McInnes, Colin; (2005) Control of Lagrange point orbits using solar sail propulsion. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484
Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. shakedown, reverse plasticity and ratchetting. International Journal of Pressure Vessels and Piping, 82 (2). pp. 85-94. ISSN 0308-0161
Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: creep relaxation and reverse plasticity. International Journal of Pressure Vessels and Piping, 82 (2). pp. 95-104. ISSN 0308-0161
Chen, Haofeng and Ponter, Alan R.S. (2005) The linear matching method for shakedown and limit analyses applied to rolling and sliding point contact problems. Road Materials and Pavement Design, 6. pp. 9-30.
Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron; (2005) Design of a contra-rotating marine current turbine. In: Proceedings of the 6th European Wave and Tidal Energy Conference. EWTEC. ISBN 094764942-5
Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron; (2005) The impact of limiting tidal turbine capacity on the output characteristics from three complimentary tidal sites in Scotland over the lunar cycle. In: Proceedings of the 9th World Renewable Energy Congress (WREC). Elsevier.
Clarke, Joseph Andrew and Grant, Andrew and Johnstone, Cameron; Sayigh, A.A.M., ed. (2005) Output characteristics of tidal current power stations during spring and neap cycles. In: Proceedings of the 8th World Renewable Energy Congress. cpl press. ISBN 0080444709
Clarke, Joseph Andrew and Johnstone, Cameron and Lever, Monica and McElroy, L.B. and Prazeres, Luis and Strachan, Paul (2005) Thermal improvement of existing dwellings. Preprint / Working Paper. ESRU Publications, Glasgow.
Clarke, Joseph Andrew and Johnstone, Cameron and McElroy, L.B.; Imbabi, M.S. and Mitchell, C.P., eds. (2005) Application of a building energy performance system to assess domestic sector upgrading strategies for Scotland. In: Proceedings of the World Renewable Energy Congress : Innovation in Europe Regional Meeting. Elsevier, Oxford, United Kingdom. ISBN 0080446701
Dachwald, Bernd and Baturkin, Volodymyr and Coverstone, Victoria L. and Diedrich, Benjamin and Garbe, Gregory P. and Gorlich, Marianne and Leipold, Manfred and Lura, Franz and Macdonald, Malcolm and McInnes, Colin R. and Mengali, Giovanni and Quarta, Alessandro A. and Rios-Reyes, Leonel and Scheeres, Daniel J. and Sebolt, Wolfgang and Wie, Bong; (2005) Potential effects of optical solar sail degredation on trajectory design. In: Proceedings of the AAS/AIAA Astrodynamics Specialist Conference. American Institute of Aeronautics and Astronautics, pp. 2569-2592.
Dachwald, Bernd and Sebolt, Wolfgang and Macdonald, M. and McInnes, C.R. and Rios-Reyes, L. and Scheeres, Daniel J. and Gorlich, M. and Lura, F. and Diedrich, B. and Baturkin, V. and Coverstone, V.L. and Leipold, M. and Garbe, G.; (2005) Potential solar sail degradation effects on trajectory and altitude controls. In: Proceedings of the AIAA Guidance, Navigation and Control Conference. American Institute of Aeronautics and Astronautics.
David-West, O.S. and Nash, D.H. and Banks, W.M.; (2005) Damage threshold and the impact characteristics of +/- 45° and +/- 60° CFRP laminates - Poster Presentation. In: Proceedings of the 4th International Conference on Advances in Experimental Mechanics. Trans Tech Publications. ISBN 0-87849-987-3
Doyle, M.J. and Carus, D. and Pridham, M.S. (2005) A system to retrieve consumer-facing product information. British Food Journal, 107 (10). pp. 781-791. ISSN 0007-070X
Endo, M. and Uchiyama, Kenji and Yokota, Y. and Shimada, Y. and Radice, Gianmarco and McInnes, Colin; (2005) Target proximity and obstacle avoidance for the altitude control of spacecraft using potential function guidance method. In: Proceedings of the Annual Meeting of the Northern Section of the Japan Society for Aeronautical and Space Sciences. Japan Society for Aeronautical and Space Sciences, pp. 23-26.
Gorman, Daniel G. and Lee, Chee K. and Craighead, Ian A. and Horáček, Jaromır (2005) Transverse vibration analysis of a prestressed thin circular plate in contact with an acoustic cavity. Engineering Mechanics, 12 (6). pp. 417-427. ISSN 1802-1484
Hiroaki, U. and McInnes, C.R.; (2005) Quasi-linear optimization for multiple-spacecraft clustering. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484
Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. Wear, 259 (1-6). pp. 243-255. ISSN 0043-1648
Jones, F.R. and Thomason, James and Liu, X.M. (2005) The differential adsorption of silanes from model e-glass surfaces using high resolution XPS. In: 5th International Symposium on Silanes and Other Coupling Agents, 2005-06-22 - 2005-06-24.
Kim, Jae Min and Clarke, Joseph Andrew and Hong, Jun and Strachan, Paul and Hwang, I. and Lee, H.W.V.; (2005) Simulation-based design procedure to evaluate hybrid-renewable energy systems for residential buildings in Korea. In: Proceedings of the 9th International Building Performance Simulation Association Conference. IBPSA, Montreal, Canada, pp. 191-198.
Kotelko, M. and Kolakowski, Z. and Rhodes, J. (2005) Comparative investigation into buckling loads and load-bearing capacity of thin-walled columns under compression. In: International Conference on Lightweight Structures in Civil Engineering, 2005-09-12 - 2005-09-14.
Kummert, M. (2005) Le Protocol de Kyoto: Situation en Europe et en Amerique du Nord (The Situation in Europe and North America with regard to the Kyoto Protocol) - Invited Lecture. In: 7ème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, 2005-05-01.
Kummert, Michael and Andre, Philippe; (2005) Simulation of a model-based optimal controller for heating systems under realistic hypothesis. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA, pp. 555-562.
Kummert, Michaël and Andre, Philippe and Argiriou, Athanassios A.; (2005) Performance comparison of heating control strategies combining simulation and experimental results. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA, pp. 563-570.
Lappas, Vaios and Wie, Bong and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K. (2005) A solar kite mission to study the Earth's magneto-tail. JBIS, Journal of the British Interplanetary Society, 58 (1-2). pp. 23-31. ISSN 0007-084X
Leen, S.B. and Hyde, T.H. and Sabesan, R. and Pan, W. (2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units. Key Engineering Materials, 293-4. pp. 261-268. ISSN 1013-9826
Li, H. and Zhou, P. and Ma, X. (2005) Pattern recognition on diesel engine working condition by using a novel methodology - Hilbert spectrum entropy. Proceedings- Institute of Marine Engineering Science and Technology Part A Journal of Marine Engineering and Technology, A6. pp. 43-48. ISSN 1476-1548
Liu, X.M. and Jones, F.R. and Thomason, James (2005) Selective adsorption of mixed organo silenes with differing reactive groups on E-glass surfaces. In: International Conference on Interfaces and Interphases in Multicomponent Materials 2005, 2005-09-12 - 2005-09-14, Centre Culturel Villeurbanne.
Lockerby, Duncan A. and Reese, Jason M. and Gallis, Michael A. (2005) The usefulness of higher-order constitutive relations for describing the Knudsen layer. Physics of Fluids, 17 (10). p. 100609. ISSN 1070-6631
Macdonald, M. and Heiyantuduwa, M.A. and Harrison, D.K. and Bailey, R.T. and Rhodes, J.; (2005) Literature review of web crippling behaviour. In: Proceedings of the 2nd Scottish Conference for Postgraduate Researchers of the Built and Natural Environment (PRoBE). UNSPECIFIED, GBR, pp. 473-482.
Macdonald, M. and McInnes, C.R. (2005) Analytical control laws for planet-centred solar sailing. Journal of Guidance, Control and Dynamics, 28 (5). pp. 1038-1048. ISSN 1533-3884
Macdonald, M. and McInnes, C.R. (2005) Spacecraft planetary capture using gravity assist manoeuvres. Journal of Guidance, Control and Dynamics, 28 (2). pp. 365-369. ISSN 1533-3884
Macdonald, Malcolm and McInnes, Colin R. (2005) Realistic Earth escape strategies for solar sailing. Journal of Guidance, Control and Dynamics, 28 (2). pp. 315-323. ISSN 1533-3884
McInnes, C.R. (2005) Dynamics of a particle moving along an orbital tower. Journal of Guidance, Control and Dynamics, 28 (2). pp. 380-382. ISSN 1533-3884
McInnes, C.R. and Hiroaki, U. (2005) Penalty-function guidance for multiple satellite cluster formation. Journal of Guidance, Control and Dynamics, 28 (1). pp. 182-185. ISSN 1533-3884
McInnes, Colin R. and Baoyin, Hexi (2005) Solar sail orbits at artificial Sun-Earth libration points. Journal of Guidance, Control and Dynamics, 28 (6). pp. 1328-1331. ISSN 1533-3884
McPherson, N.A. and Suarez-Fernandez, N. and Tan, H.C.P. and Lee, C.K. and Baker, T.N. (2005) Laser and laser assisted arc welding processes for DH 36 microalloyed steel ship plate. Science and Technology of Welding and Joining, 10 (4). pp. 460-467. ISSN 1362-1718
Pan, W. and Krohn, K. and Leen, S.B. and Hyde, T.H. and Walloe, S. (2005) A sigmoidal model for superplastic deformation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 219 (3). pp. 149-162. ISSN 1464-4207
Pang, Yan and Spathopoulos, Michael P. and Raisch, Joerg; (2005) On suboptimal control design for hybrid automata using predictive control techniques. In: Proceedings of the the 16th IFAC World Congress. Elsevier. ISBN 008045108X
Pethrick, R.A. and Banks, W.M. (2005) Dielectric studies on adhesively bonded composite joints. In: Society for Adhesion and Adhesives One Day Symposium on 'Bonding of Composite Materials', 2005-12-08.
Ponter, Alan R.S. and Chen, Haofeng (2005) Direct methods for limits in plasticity. Archives of Mechanics, 57 (2-3). p. 171.
Portugues, I. and Moore, P.J. and Sutton, S. and Johnstone, C.; (2005) Vehicle mounted radiometric system for location of partial discharges. In: 3rd IEE international conference on reliability of transmission and distribution networks (RTDN 2005). Institution of Engineering and Technology, 303–307. ISBN 9780863414824
Prazeres, Luis and Clarke, Joseph Andrew; (2005) Qualitative analysis of the usefulness of perceptualisation techniques in communicating building simulation outputs. In: Proceedings of the 9th International Building Performance Simulation Conference. IBPSA, pp. 961-968. ISBN 972-97973-2-3
Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. Wear, 259 (1-6). pp. 256-262. ISSN 0043-1648
Reese, Jason and Lockerby, Duncan A. and Emerson, David (2005) On hydrodynamic predictions of near-wall effects in rarefied gases: some phenomenological and modelling approaches. In: International Conference on Heat Transfer and Fluid Flow in Microscale, 2005-09-25 - 2005-09-30.
Rhodes, Jim and Zhao, Xiao-Ling and Binh, D.V. and Al-Mahaidi, Riadh (2005) Rational design analysis of stub columns fabricated using very high strength circular steel tubes. Thin-Walled Structures, 43 (3). pp. 445-460. ISSN 0263-8231
Stack, M.M. (2005) Bridging the gap between tribology and corrosion: from wear maps to Pourbaix diagrams - Runner-up for the Guy Bengough Award, IoM3, 2007. International Materials Reviews, 50 (1). pp. 1-17. ISSN 0950-6608
Stack, M.M. and Jana, B. (2005) Modelling particulate erosion-corrosion regime transitions Al/Al2O3 and Cu/Al2O3 MMCs in aqueous conditions. Tribology International, 38 (11-12). pp. 995-1006. ISSN 0301-679X
Stack, M.M. and Mathew, M.T. (2005) Transitions in microabrasion mechanisms for WC - Co (HVOF) coated steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 49-57. ISSN 1350-6501
Stack, M.M. and Williams, J. (2005) Tribology International - Guest Editorial in memory of Tony Ball. Tribology International, 38 (9). p. 785. ISSN 0301-679X
Trendafilova, I. (2005) A study on vibration-based damage detection and location in an aircraft wing scaled model. Applied Mechanics and Materials, 3-4. pp. 309-314. ISSN 1660-9336
Trendafilova, Irina (2005) An investigation on vibration-based damage detection in an aircraft wing scaled model. Key Engineering Materials, 293-4. pp. 321-328. ISSN 1013-9826
Tuohy, Paul and McElroy, Lori and Johnstone, Cameron; (2005) Thermal mass, insulation and ventilation in sustainable housing - An investigation across climate and occupancy. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA, CAN, pp. 1253-1260.
Whitfield, R.I. and Duffy, A.H.B. and Kortabarria, L.; Samuel, A. and Lewis, W., eds. (2005) Identifying and evaluating parallel design activities using the design structure matrix. In: Proceedings of the 15th International Conference on Engineering Design (ICED'05). Design Society. ISBN 0-85825-788-2
Wood, Jim; (2005) The FENET plate/shell fabrication procedural benchmark and 'round robin' exercise. In: Engineering Simulation. NAFEMS.
Yokota, Y. and Shimada, Y. and Uchiyama, Kenji and Radice, Gianmarco and McInnes, C.R.; (2005) Proximity manoeuvre control for chaser spacecraft using potential function guidance method. In: Proceedings of the JSASS/KSAS Joint International Symposium on Aerospace Engineering. JSASS/KSAS, pp. 265-268.
Yuan, Q. and Stack, Margaret and Chi, Kuangnan (2005) Comparison and analysis of two apparatus (IJR) and (RCE) used for erosion-corrosion in aqueous conditions. Journal of Iron and Steel Research International, 12 (4). pp. 54-59. ISSN 1006-706X
Zhang, Yonghao and Barber, Robert W. and Emerson, David R. (2005) Particle separation in microfluidic devices - SPLITT fractionation and microfluidics. Current Analytical Chemistry, 1 (3). pp. 345-354. ISSN 1573-4110
Zhou, P. and Li, H. and Clelland, D. (2005) Pattern recognition on diesel engine working conditions by Wavelet Kullback-Leibler distance method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (9). pp. 879-887. ISSN 0954-4062
2004
Oliveira, Monica and Ni, X. (2004) Characterisation of a gas-liquid PBC : Bubble size and gas holdup. AIChE Journal, 50 (12). pp. 3019-3033. ISSN 0001-1541
Grant, A.D. and Kelly, N.J. (2004) A ducted wind turbine simulation model for building simulation. Building Services Engineering Research and Technology, 25 (4). pp. 339-349. ISSN 0143-6244
Banks, W.M. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded CFRP structures subjected to ageing in various solvents. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 273-281. ISSN 1464-4207
Macdonald, Martin and Rhodes, J. (2004) Stainless steel stub columns subject to combined bending and axial loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05.
Walker, Colin and Gray, Thomas and Nicol, Alexander and Chadwick, E.K.J. (2004) Evaluation of test regimes for stab-resistant body armour. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 355-363. ISSN 1464-4207
Zhang, B. and Baker, T.N. (2004) Effect of heat treatment on the hot deformation behaviour of AA6082 alloy. Journal of Materials Processing Technology, 153-154. pp. 881-885. ISSN 0924-0136
Lockerby, Duncan A. and Reese, Jason and Gallis, Michael A. (2004) The constitutive relations and boundary conditions for gas microflow modelling. In: Transport Phenomena in Micro and Nano Devices, 2004-10-17 - 2004-10-21.
David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: ASC/ASTM-D30 Joint 19th Annual Technical Conference, 2004-10-17 - 2004-10-20.
Craighead, I.A. and Gray, T.G.F. (2004) Investigation of diesel generator shaft and bearing failures. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 218 (3). pp. 153-158. ISSN 1464-4193
Abid, Muhammad and Nash, David (2004) Stress variation in flange of a non-gasketed flanged pipe joint during bolt up and operating conditions. In: 4th International Conference on Advanced Engineering Design, 2004-09-05 - 2004-09-08.
David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates - Poster Presentation. In: The 2nd International Conference on Composites Testing and Model Identification, CompTest 04, 2004-09-21 - 2004-09-23.
Pang, Yan and Spathopoulos, Michael P. (2004) On weighted time optimal control for linear hybrid automata using quantifier elimination. In: Proceedings of the 7th IFAC International Workshop on Discrete Event Systems, 2004-09-22 - 2004-09-24.
Tanimura, K. and Ujihashi, Sadayuki and Nash, David and Dempster, William (2004) Finite element analysis of the radial force cariation of a ring stent. In: JSME Mechanical Engineering Congress 2004, 2004-09-10 - 2004-09-11.
Taylor, Ian and Vezza, M. and Salisbury, I (2004) Numerical investigation of the effects of pedestrian barriers on aeroelastic stability of a proposed footbridge. In: Sixth UK Conference on Wind Engineering, 2004-09-15 - 2004-09-17.
Macdonald, I. and Strachan, P.A. and Hand, J. (2004) CIBSE standard tests for the assessment of building services design software. Guide or manual. Chartered Institution of Building Services Engineers, London, UK.
Armstrong, G.S. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. Part 2 - Examination of the failure process and effects of drying. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (3). pp. 183-192. ISSN 1464-4207
Heim, D. and Clarke, J.A. (2004) Numerical modelling and thermal simulation of PCM-gypsum composites with ESP-r. Energy and Buildings, 36 (8). pp. 795-805. ISSN 0378-7788
Pethrick, R.A. and Armstrong, G.S. and Banks, W.M. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. part 1: examination of moisture absorption. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L3). pp. 169-182.
Bailey, C.L. and Barber, Robert W. and Emerson, David and Lockerby, Duncan A. and Reese, Jason; (2004) A critical review of the drag force on a sphere in the transition flow regime. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 743-748. ISBN 0-7354-0247-7
Lockerby, Duncan A. and Reese, Jason and Barber, Robert W. and Emerson, David; (2004) Geometric and constitutive dependence of Maxwell's velocity slip boundary condition. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 725-730. ISBN 0-7354-0247-7
Lockerby, Duncan A. and Reese, Jason and Gallis, Michael A.; (2004) A wall-function approach to incorporating Knudsen-layer effects in gas micro flow simulations. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 731-736. ISBN 0-7354-0247-7
Afendi, M. and Banks, W.M. and Kirkwood, D. (2004) Separating bubbles by superficial capillary flow. In: The 7th International Conference on Flow Processes in Composite Materials, 2004-07-12 - 2004-07-14.
Chen, Haofeng and Ponter, Alan R.S. (2004) A simplified creep-reverse plasticity solution method for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 23 (4). pp. 561-577. ISSN 0997-7538
Dadzie, K. and Meolans, J.G. (2004) Anisotropic scattering kernel and temperature jump at the wall. In: 24th International Symposium on Rarefied Gas Dynamics, Bari, Italy, 1900-01-01.
Lockerby, Duncan A. and Reese, Jason and Emerson, David and Barber, Robert W. (2004) The velocity boundary condition at solid walls in rarefied gas calculations. Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 70 (1). 017303. ISSN 2470-0053
Russell, C. and Nash, D.H. (2004) Development of a web-based interface for the automatic finite element analysis of pressure vessels. In: ASME Pressure Vessels and Piping Conference, 2004-07-25 - 2004-07-29.
Kelly, Nick and Macdonald, Iain; (2004) Coupling CFD and visualisation to model the behaviour and effect on visibility of small particles in air. In: eSim2004, The Canadian Building Simulation Conference. European School for Industrial Mathematics (ESIM), pp. 153-160.
Thomason, J.L. (2004) Structure-processing-performance relationships of injection moulded thermoplastic composites at high fibre contents. In: 11th European Conference on Composite Materials: From Nano-scale Interactions to Engineering Structures, 2004-05-31 - 2004-06-03. (Unpublished)
Fernández, J and Blanco, E and Parrondo, J and Stickland, M. T. and Scanlon, T. J. (2004) Performance of a centrifugal pump running in inverse mode. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). pp. 265-271. ISSN 0957-6509
Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836
Bourgeois, D. and Hand, Jon and Macdonald, Iain and Reinhart, C. (2004) Adding sub-hourly occupancy prediction, occupancy-sensing control and manual environment control to whole-building energy simulation. In: Proceedings of the Indoor Air Quality, Ventilation and Energy Conservation in Buildings Conference, 2004-06-09 - 2004-06-11.
Clarke, Joseph Andrew (2004) Conserving the balance - a personal view. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). i-ii. ISSN 0957-6509
Macdonald, I. (2004) Assessing the significance of design changes when simulating building performance including the effects of uncertain input data. In: Proceedings of ESim 04 Conference, 2004-06-09 - 2004-06-11.
Scanlon, T.J. and Stickland, M.T. (2004) A novel method for the provision of flight experience and flight testing for undergraduate aeronautical engineers at the University of Strathclyde. Aeronautical Journal, 108 (1084). pp. 315-318. ISSN 0001-9240
Spathopoulos, Michael P. (2004) Non-blocking supervisory control for initialised rectangular automata. Asian Journal of Control, 6 (2). pp. 293-301. ISSN 1561-8625
Clarke, Joseph Andrew and Grant, Andrew and Johnstone, Cameron; Chung, J.S. and Izumiyama, K. and Sayed, M. and Hong, S.W., eds. (2004) Output characteristics of tidal current power stations. In: Proceedings of the 14th (2004) International Offshore and Polar Engineering Conference Proceedings. International Offshore and Polar Engineering Conference Proceedings, 1 . International Society of Offshore and Polar Engineers, FRA, pp. 113-119. ISBN 1880653621
Oliveira, Monica and Ni, X. (2004) Effect of hydrodynamics on mass transfer in a gas-liquid oscillatory baffled column. Chemical Engineering Journal, 99 (1). pp. 59-66. ISSN 1385-8947
Jiang, Jiaren and Stott, F.H. and Stack, Margaret (2004) A generic model for dry sliding wear of metals at elevated temperatures. Wear, 256 (9/10). pp. 973-985. ISSN 0043-1648
Hughes, Gareth W. and Macdonald, M. and McInnes, Colin and Atzei, A. and Falkner, P.; (2004) Analysis of a solar sail mercury sample return mission. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 197.
Dadzie, S. Kokou and Méolens, J. Gilbert (2004) Anisotropic scattering kernel : generalized and modified Maxwell boundary conditions. Journal of Mathematical Physics, 45 (5). pp. 1804-1819. ISSN 0022-2488
Argiriou, A.A. and Bellas-Velidis, I. and Kummert, M. and Andre, P. (2004) A neural network controller for hydronic heating systems of solar buildings. Neural Networks, 17 (3). pp. 427-440. ISSN 0893-6080
Bloem, J.J. and Baker, P.H. and Strachan, Paul (2004) Energy performance of buildings and the integration of photovoltaics. In: International Conference on Improving Energy Efficiency in Commercial Buildings (IEECB 04), 2004-04-19 - 2004-04-21.
Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836
Zhang, Yonghao and Emerson, David R. (2004) Effect of flow development region and fringing magnetic force field on annular split-flow thin fractionation. Journal of Chromatography A, 1042 (1-2). pp. 137-145.
Lee, C.K. and Candy, J. and Tan, H.C.P. (2004) Measurement and finite element analysis of temperature distribution in arc welding process. International Journal of Computer Applications in Technology, 21 (4). pp. 171-177. ISSN 0952-8091
Stack, M.M. and Jawan, H. and Mathew, M.T. (2004) Some thoughts on micro-abrasion mapping of steels in corrosive environments. In: 8th International Conference on Tribology, 2004-03-24 - 2004-03-27.
Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. Wear, 256 (5). pp. 565-576. ISSN 0043-1648
Lubis, A. and Boyle, J.T. (2004) The pressure reduction effect in smooth piping elbows - revisited. International Journal of Pressure Vessels and Piping, 81 (2). pp. 119-125. ISSN 0308-0161
Spence, J. and Nash, D.H. (2004) Milestones in pressure vessel technology. International Journal of Pressure Vessels and Piping, 81 (2). pp. 89-118. ISSN 0308-0161
Abid, M. and Nash, D.H. (2004) A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions. International Journal of Pressure Vessels and Piping, 81 (1). pp. 67-74. ISSN 0308-0161
Scanlon, T.J. and Stickland, M.T. (2004) A numerical analysis of buoyancy-driven melting and freezing. International Journal of Heat and Mass Transfer, 47 (3). pp. 429-436. ISSN 0017-9310
Abo-Elnor, Mootaz and Hamilton, R. and Boyle, James (2004) Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis. Soil and Tillage Research, 75 (1). pp. 61-73. ISSN 0167-1987
Alsop, S. and McLean, R.F. and Fleming, J.S.; (2004) Defeating Nyquist. In: Vibrations in Rotating Machinery (IMechE). IMechE conference transactions (2004-2). John Wiley & Sons Inc., pp. 281-290. ISBN 1860584470
Bookless, J. and McInnes, C.R.; (2004) Dynamics stability and control of displaced non-Keplerian orbits. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 173.
Born, F. J. and Clarke, J. A. and Johnstone, C. M.; (2004) Development of a simulation-based decision support tool for renewable energy integration and demand-supply matching. In: Proceedings of ESim 04 Conference, Vancouver. IBPSA. ISBN 255117239X
Bradley, David E. and Kummert, Michael and McDowell, Timothy P.; (2004) Converging on a recommended set of interpretations and assumptions in applying standard tests to energy analysis tools. In: Proceedings of SimBuild 2004, IBPSA-USA Conference on Building Sustainability and Performance Through Simulation. IBPSA.
Bradley, David E. and Kummert, Michael and McDowell, Timothy P.; (2004) Experiences with and interpretation of standard test methods of building energy analysis tools. In: Proceedings of the IBPSA-Canada Bi-Annual Conference, eSIM 2004. IBPSA.
Burkholder, F.W. and Kummert, M. (2004) TRNSYS modeling of a hybrid lighting system. In: TRNSYS Users Conference, 2004-03-01.
Camilleri, D. and Gray, T.G.F. and Comlekci, T.; (2004) Use of thermography to calibrate fusion welding procedures in virtual fabrication applications. In: InfraMation 2004. Infrared Training Centre.
Cartmell, M. and McInnes, C.R. and McKenzie, D. and Cartmell, Matthew P.; (2004) Proposals for an Earth-Moon mission design based on motorised momentum exchange tethers. In: Proceedings of the XXXII Summer School on Advanced Problems in Mechanics, APM 2004, St Petersburg. IPME RAS.
Chen, Haofeng and Ponter, Alan R.S. (2004) Integrity assessment for a tubeplate using linear matching method. International Journal of Pressure Vessels and Piping, 81. pp. 327-336. ISSN 0308-0161
Clarke, J. A. and Conner, S. and Fujii, G. and Geros, V. and Johannesson, G. and Johnstone, C. M. and Karatasou, S. and Kim, J. and Santamouris, M. and Strachan, P. A. (2004) The role of simulation in support of internet-based energy services. Energy and Buildings, 36 (8). pp. 837-846. ISSN 0378-7788
Clarke, J. A. and Tang, D.; (2004) A co-operating solver approach to building simulation. In: Proceedings of ESim 04 conference. IBPSA, CAN.
Clarke, Joseph Andrew and Johnstone, Cameron and Kondratenko, Irena and Lever, Monica and McElroy, Lori and Prazeres, Luis and McKenzie, F. and Strachan, Paul and Peart, G. (2004) Using simulation to formulate domestic sector upgrading strategies for Scotland. Energy and Buildings, 36 (8). pp. 759-770. ISSN 0378-7788
Doo, G. and McNaught, J.M. and Dempster, W.M. (2004) Shellside evaporation in a TEMA e-shell : flow pattern and transition. Applied Thermal Engineering, 24 (8-9). pp. 1195-1205. ISSN 1359-4311
Galbraith, G.H. and Kelly, D.J. and McLean, R.C. (2004) Moisture permeability measurements under reduced barometric pressures. Materials and Structures, 37 (269). pp. 311-317. ISSN 1359-5997
Hiroaki, U. and McInnes, C.R.; (2004) Fuel-optimum near-miss avoidance control for clustered satellites. In: Proceedings of the 18th International Symposium on Space Flight Dynamics. European Space Agency, p. 1093. ISBN 929092859X
Hobbs, Dan and Morbitzer, Christoph and Spires, Brian and Strachan, Paul and Webster, Jim (2004) Experience of using building simulation within the design process of an architectural practice. Building Services Engineering Research and Technology, 14 (1). pp. 43-50. ISSN 0143-6244
Hughes, Gareth W. and McInnes, Colin R. (2004) Small-body encounters using solar sail propulsion. Journal of Spacecraft and Rockets, 41 (1). pp. 140-150. ISSN 0022-4650
Johnston, R. and McIvor, A.J.; Johnston, R. and McIvor, A.J., eds. (2004) Oral history, subjectivity, and environmental reality: occupational health histories in twentieth-century scotland. In: OSIRIS:Landscapes of Exposure: Knowledge and Illness in Modern Environments. Osiris, 2nd Series, 19 . JSTOR, United States, pp. 234-249. ISBN 0–226–53251–8
Johnstone, C. and Nielsen, K. and Lewis, T. and Sarmento, A. and Lemonis, G. (2004) A European platform for the integration and sharing of research and technical development activities in ocean energy systems. In: Proceedings of the 8th World Renewable Energy Congress, 2003-08-29 - 2003-09-03.
Kim, J. and Clarke, J.; (2004) The EnTrak system : supporting energy action planning via the Internet. In: Proceedings of the Congress of Tall Buildings Urban Habitats (CTBUH). ASME.
Kummert, M. (2004) Improvements to the TRNSYS kernel and standard library. In: European TRNSYS Users Conference, 1900-01-01.
Kummert, Michael and Bradley, David E. and McDowell, Timothy P.; (2004) Combining different validation techniques for continuous software improvement - Implications in the development of TRNSYS 16. In: Proceedings of the IBPSA-Canada Bi-Annual Conference, eSIM 2004. IBPSA.
Lappas, Vaios and Wie, Bong and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K.; (2004) A solar kite mission to study the Earth's magneto-tail, Paper IAC 04-U.P.01. In: Proceedings of the 55th International Astronautical Congress. International Astronautical Federation, p. 194. ISBN 1604236477
Lazarov, B.S. and Trendafilova, I.; Boller, Chistian and Staszewski, Wieslaw J., eds. (2004) An investigation on vibration-based damage diagnosis in thin plates. In: Proceedings of the Second European Workshop on Structural Health Monitoring. Destech Publications, pp. 76-82. ISBN 1-932078-41-X
Li, Y. and Wilson, J.A. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2004) The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels. ISIJ International, 44 (6). pp. 1093-1102. ISSN 0915-1559
Lyngvi, A. and Falkner, P. and Rando, N. and Atzei, A. and Peacock, A. and McInnes, Colin and Hughes, Gareth W. and Macdonald, M. (2004) Technology reference studies using solar sails. In: Proceedings of Solar Sail Technology and Applications Conference, 2004-09-01.
MacKintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2004) Development of novel urethane composites for vibrational control. In: 11th European Conference on Composite Materials: From Nano-scale Interactions to Engineering Structures, 2004-05-31 - 2004-06-03.
Macdonald, M. and Hughes, Gareth W. (2004) Solar sailing. In: Summer Workshop on Advanced Topics in Astrodynamics, 2004-07-05 - 2004-07-10, Institut d’Estudis Espacials de Catalunya.
Macdonald, M. and McInnes, Colin and Hughes, Gareth W.; (2004) A near-term roadmap for solar sailing. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 96.
Macdonald, M. and Rhodes, J. (2004) Finite element modelling of cold formed stainless steel columns. Acta Polytechnica Scandinavica Applied Physics Series, 45 (3). pp. 92-98. ISSN 0355-2721
Macdonald, Martin and Kotelko, Maria and Rhodes, James and Kolakowski, Z. (2004) Comparative study into load-capacity of lipped channel columns under compression. In: Fourth International Conference on Coupled Instability of Metal Structures (CIMS 04), 2004-09-27 - 2004-09-29.
Macdonald, Martin and Rhodes, James; Loughlan, J., ed. (2004) Failure loads of stainless steel stub columns subject to varying bending and axial loading. In: Proceedings of the 4th International Conference on Thin-Walled Structures(ICTWS 04). CRC Press, pp. 581-594. ISBN 9780750310062
Macdonald, Martin and Rhodes, James; (2004) Material properties of cold formed stainless steel structural sections. In: Proceedings of the 3rd International Conference on Computer Modelling and Simulation of Materials. Advances in science and technology (Faenza, Italy) (42). Techna Group, Faenza, Italy, pp. 733-742. ISBN 88-86538-45-6
Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Shakedown behaviour of thick cylindrical vessels with crossholes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (3). pp. 133-141. ISSN 0954-4089
Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Stress concentration at crossholes in thick cylindrical vessels. Journal of Strain Analysis for Engineering Design, 39 (5). pp. 471-481. ISSN 0309-3247
McDowell, Timothy P. and Bradley, David E. and Thornton, Jeff W. and Kummert, Michael; (2004) Simulation synergy : expanding TRNSYS capabilities and usability. In: Proceedings of SimBuild 2004, IBPSA-USA Conference on Building Sustainability and Performance Through Simulation. IBPSA.
McInnes, C.R. (2004) Deflection of near-Earth asteroids by kinetic energy impacts from retrograde objects. Planetary and Space Science, 52 (7). pp. 587-590. ISSN 0032-0633
McInnes, C.R. (2004) Delivering fast and capable missions to the outer solar system. Advances in Space Research, 34 (1). pp. 184-191. ISSN 0273-1177
McInnes, C.R. (2004) Solar Sailing: Technology, Dynamics and Mission Applications. Springer-Praxis Series in Space Science and Technology . Springer. ISBN 185233102X
McIvor, Arthur and Johnston, R. (2004) Dangerous Work, Hard Men and Broken Bodies: Masculinity in the Clydeside Heavy Industries. Labour History Review, 69 (2). pp. 135-52. ISSN 0961-5652
Melas, D.A. and Craighead, I.A. and Esat, I.I. (2004) An experimental study for measuring the natural frequency of the timing belt. International Journal of Vehicle Design, 35 (3). pp. 274-288. ISSN 0143-3369
Morbitzer, Christoph and Strachan, Paul and Simpson, C.J. (2004) Data mining analysis of building simulation performance data. Building Services Engineering Research and Technology, 25 (3). pp. 253-267. ISSN 0143-6244
Nash, David and Abid, Muhammad (2004) Surface sensitivity study of non-gasketed flange joint. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 205-212. ISSN 0954-4089
Phillpot, C. and Dempster, W.M. and Deans, J.; (2004) The condensation of ammonia-water mixtures in a small experimental shell and tube condenser. In: Proceedings of the 4th European Thermal Sciences Conference. Eurotherm.
Ponter, Alan R.S. and Chen, Haofeng and Willis, M. and Evans, J. (2004) Fatigue-creep and plastic collapse of notched bars. Fatigue and Fracture of Engineering Materials and Structures, 27. pp. 305-318. ISSN 8756-758X
Rhodes, J.; (2004) Postbuckling behaviour and interaction of different buckling modes in thin-walled members - Invited Keynote Lecture. In: Proceedings of the 4th International Conference on Thin-Walled Structures(ICTWS 04). CRC Press. ISBN 9780750310062
Rhodes, J.; (2004) Recent developments of simple user friendly microcomputer programs for thin-walled structures applications. In: International Workshop on Recent Advances and Future Trends in Thin-Walled Structures Technology. Canopus Publishing Limited, p. 256.
Rhodes, J.; (2004) Recent developments of simple user friendly microcoomputer programs for thin-walled structures applications. In: Proceedings of the International Workshop, Thin-Walled Structures - Recent Advances and Future Trends in Thin-Walled Structures Technology, Loughborough, UK. Loughborough University. ISBN 0953786897
Rhodes, J. and Macdonald, Martin (2004) Channel section beams subject to static and dynamic loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05.
Scanlon, T.J. and Stickland, M.T.; Bergles, A., ed. (2004) A numerical analysis of thermosolutal melting. In: Proceedings of the 11th ASME/ZSIS International Thermal Science Seminar. ASME, pp. 711-716.
Spathopoulos, M.P. and Fragopoulos, D. (2004) Pendulation control of an offshore crane. International Journal of Control, 77 (7). pp. 654-670. ISSN 0020-7179
Spathopoulos, M.P. and Komenda, J. (2004) Discussion on: Supervisory control of discrete event systems with flexible marking. European Journal of Control, 10 (1). pp. 61-64. ISSN 0947-3580
Stack, M.M. (2004) Editorial Article. Wear, 256 (9-10). pp. 855-856. ISSN 0043-1648
Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system : some comments on particle size effects. Wear, 256 (5). pp. 557-564. ISSN 0043-1648
Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. Wear, 256 (9-10). pp. 986-1004. ISSN 0043-1648
Stack, M.M. and Mathew, M.T. (2004) Mapping the micro-abrasion resistance of WC/Co based coatings in aqueous conditions. Surface and Coatings Technology, 183 (2-3). pp. 337-346. ISSN 0257-8972
Stack, M.M. and Mathew, M.T. (2004) Some comments on micro-abrasion interactions for pure metals in bio-oils. Journal of Synthetic Lubrication, 21 (2). pp. 105-118. ISSN 0265-6582
Stack, M.M. and Purandare, Y. and Hovsepian, P. (2004) Impact angle effects on the erosion - corrosion of superlattice CrN/NbN PVD coatings. Surface and Coatings Technology, 188-189. pp. 556-565. ISSN 0257-8972
Stack, Margaret (2004) Prediction of erosive wear in the power industry-some new horizons. UK Power Magazine, 1. pp. 65-67.
Stack, Margaret (2004) There's something in the way you move : horse racing and skiing are two sports where a better understanding of friction could work. Physics World, 11. pp. 24-25. ISSN 0953-8585
Tenchev, R.T. and MacKenzie, J.A. and Scanlon, T.J. and Stickland, M.T. (2004) Finite element moving mesh analysis of phase change problems with natural convection. International Journal of Heat and Fluid Flow, 26 (4). pp. 597-612. ISSN 0142-727X
Thomason, J.L. (2004) Glass fibres for composites reinforcement: a presentation on how glass fibre is manufactured. In: Seminar, University of Sheffield, 1900-01-01.
Trendafilova, I. and Imbabi, M. (2004) Novel health monitoring procedure for reinforced concrete slabs. Applied Mechanics and Materials, 1-2. pp. 65-70. ISSN 1660-9336
Wallace, M.S. and Dempster, W.M. and Scanlon, T.J. and Peters, J. and McCulloch, S. (2004) Prediction of impact erosion in valve geometries. Wear, 256 (9-10). pp. 927-936. ISSN 0043-1648
Wood, J. (2004) Glasgow's contribution to science and engineering across the FENET business sectors. In: 7th FENET Technology Workshop, 2004-10-07.
Wood, Jim (2004) Procedural benchmarks for common fabrication details in plate/shell structures. In: FENET Multi-physics and Analysis Workshop, 2004-03-25.
Zhang, Yonghao and Gu, X.J. and Barber, Robert W. and Emerson, David (2004) An analysis of induced pressure fields in electroosmotic flows through microchannels. Journal of Colloid and Interface Science, 275 (2). pp. 670-678. ISSN 0021-9797
2003
McInnes, Colin R. (2003) Solar sailing : mission applications and engineering challenges. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 361 (1813). pp. 2989-3008. ISSN 1471-2962
Reese, Jason M. and Gallis, Michael A. and Lockerby, Duncan A. (2003) New directions in fluid dynamics : Non-equilibrium aerodynamic and microsystem flows. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 361 (1813). pp. 2967-2988. ISSN 1471-2962
Selamat, M.S. and Watson, L.M. and Baker, T.N. (2003) XRD and XPS studies on surface MMC layer of SiC reinforced Ti-6Al-4V alloy. Journal of Materials Processing Technology, 142 (3). pp. 725-737. ISSN 0924-0136
MacKenzie, P.M. and Walker, Colin; Walker, Colin, ed. (2003) Assessment of the shape of crack-tip plastic zones as a function of applied load. In: Handbook of Moiré Measurement. Institute of Physics, Bristol, UK, pp. 51-55. ISBN 0750305223
Thomsen, O.T. and Banks, W.M. (2003) An improved model for the prediction of intra-cell buckling in CFRP sandwich panels under in-plane compressive loading. Composite Structures, 65 (3-4). pp. 259-268. ISSN 0263-8223
Zhang, Y.L. and Gorman, Daniel and Reese, Jason (2003) Vibration of pre-stressed thin cylindrical shells conveying fluid. Thin-Walled Structures, 41 (12). pp. 1103-1127. ISSN 0263-8231
Gorman, Daniel G. and Lee, Chee K. and Reese, Jason M. and Horáček, Jaromir (2003) Free vibration analysis of a basic structural/gas/liquid interacting system. Materials Science Forum, 440-1. pp. 381-388. ISSN 1662-9760
Clarke, J.A.; (2003) IT systems for energy and environment monitoring, planning, design and control. In: Solar Thermal Technologies for Buildings: The State of the Art. Buildings, Energy and Solar Technology . Earthscan Publications Ltd, p. 256. ISBN 9781902916477
McPherson, N.A. and Samson, H. and Suarez-Fernandez, N. and Baker, T.N. (2003) Steel microstructures in autogeneous laser welds. Journal of Laser Applications, 15 (4). pp. 200-201. ISSN 1042-346X
Muscat, Martin and Mackenzie, D. (2003) Elastic shakedown analysis of axisymmetric nozzles. Journal of Pressure Vessel Technology, 125 (4). pp. 365-370. ISSN 0094-9930
Carus, D. and Doyle, M.J. (2003) The EU PACKAGE project. In: Faraday Packaging Partnership Conference, 2002-04-01.
Nicol, David J. and Boyle, James T. (2003) Peer instruction versus class-wide discussion in large classes: a comparison of two interaction methods in the wired classroom. Studies in Higher Education, 28 (4). pp. 457-473. ISSN 0307-5079
Spence, J. and Nash, D.H. (2003) Parametric plastic collapse loads and their validation for horizontal saddle supported storage vessels. In: International Conference on Design, Inspection, Maintenance and Operation of Cylindrical Steel Tanks and Pipelines, 2003-10-08 - 2003-10-11.
Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) The Influence of Oxide Film Defects on the Mechanical Strength of Al Castings. In: Proceedings of the European Metallurgy Conference, EMC 03, Hannover, Germany, 2003-01-01.
Zhang, Y.L. and Reese, J.M. and Gorman, D.G. (2003) An experimental study of the effects of pulsating and steady internal fluid flow on an elastic tube subjected to external vibration. Journal of Sound and Vibration, 266 (2). pp. 355-367. ISSN 0022-460X
Heck, H. and Clemens, D. and Reins, F. and Carus, D. and Doyle, M.J. (2003) Alternative access to product information on consumer packages in supermarkets and in smart home environments. In: 7th European AAATE Conference: Shaping the Future, 2003-08-30 - 2003-09-03.
Afendi, M. and Banks, W.M. and Kirkwood, D.; Summerscales, John, ed. (2003) The means to void content reduction in vacuum infusion process. In: Proceedings of the ACMC/SAMPE Conference on Marine Composites : Sherwell Centre, University of Plymouth, 11-12 September 2003. Advanced Composites Manufacturing Centre, School of Engineering, University of Plymouth, Plymouth, UK. ISBN 1870918029
Bailly, D. and Campbell, M. and Poffa, N. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. and Nielsen, G.G. (2003) Moisture transport studies in building materials. In: Proceedings of the 12th Institute of Physics Conference on Sensors and their Applications, 2003-09-02 - 2003-09-04.
Camilleri, D. and Comlekci, T. and Lee, C.K. and Tan, H.C.P. and Gray, T.G.F. (2003) Investigation of temperature transients during flux-cored CO2 butt welding of CMn steel plates. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.
Clarke, J.A. and Grant, A.D. and Johnstone, C.; (2003) Development and performance evaluation of novel rotor-generators for tidal current energy conversion. In: Proceedings of the 6th Annual Parsons Turbine Conference. Maney Publishing. ISBN 1-904350-20-8
Galbraith, G.H. and Kelly, D. and McLean, R.C. (2003) Alternative methods for measuring moisture transfer coefficients of building materials. In: Proceedings of the 2nd International Conference on Building Physics, 2003-09-14 - 2003-09-18.
McElroy, L.B. and Clarke, J.A. and Elrick, B.F. and Telfer, S.; (2003) Putting theory into practice: using simulation to meet new building performance legislation requirements. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institution of Building Services Engineers (CIBSE). Chartered Institution of Building Services Engineers (CIBSE). ISBN 190328743X
Nash, D.H. and Spence, J. (2003) The buckling and collapse behaviour of saddle-supported cylinders - Keynote Lecture. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12.
Palmer, D. and Tamburrini, M. and Macdonald, I. (2003) Quality assurance of simulation in an engineering practice. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference, 2003-09-24 - 2003-09-26.
Strang, A. and Conroy, R.D. and Banks, W.M. and Blackler, M. and Leggett, J. and McColvin, G.M. and Simpson, S. and Smith, M. (2003) Parsons 2003, engineering issues in turbine machinery, power plant and renewables: Proceedings of the Sixth International Charles Parsons Turbine Conference 16-18 September 2003 Trinity College Dublin, Ireland. Maney, London, UK. ISBN 1-904350-20-8
Sun, J. and Campbell, M. and Bailly, D. and Poffa, N. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. and Nielsen, G.G. (2003) Imaging techniques for structures using X- and y- photons. In: Proceedings of the 12th Institute of Physics Conference on Sensors and their Applications, 2003-09-02 - 2003-09-04.
Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093
Morbitzer, Christoph and Strachan, Paul and Simpson, Catherine; (2003) Application of data mining techniques for building simulation performance prediction analysis. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association.
Andre, P. and Kelly, N.J. and Boreaux, J.J. and Lacote, P. and McAdam, C.P. (2003) Different approaches for the simulation of an experimental building hosting a climate chamber devoted to artificial fog production. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.
Grant, A.D. and Kelly, N.J.; (2003) The development of a ducted wind turbine simulation model. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association, pp. 407-414.
Bolmsjo, G. and Lorentzon, U. and Vatau, M. and Doyle, M.J. and Carus, D. and Topping, M.; Craddock, G.M. and McCormack, L.P. and Reilly, R.B. and Knops, H., eds. (2003) Development and integration of package opening devices with a flexible robot in a smart home environment. In: Proceedings of the 7th European AAATE Conference: Shaping the Future. Assistive Technology Research Series . IOS Press, Amsterdam, Netherlands. ISBN 9781586033736
Chow, T.T. and Clarke, J.A. and Song, C.L.; (2003) The role of primitive part modelling within an integrative simulation environment. In: Proceedings of the 8th international building performance simulation association conference. IBPSA, pp. 187-194. ISBN 9038615663
Clarke, J. A. and Conner, S. and Geros, V. and Johnstone, C. M. and Karatasou, S. and Kim, J. and Santamouris, M. and Strachan, P. A.; (2003) Simulation support for internet-based energy services. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, NLD, pp. 187-194.
Clarke, J.A. and Johnstone, C. and Lever, M. and McElroy, L.B. and McKenzie, F. and Peart, G. and Prazeres, L.M.R. and Strachan, P.A.; (2003) Simulation support for the formulation of domestic sector upgrading strategies. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, NLD, pp. 219-226.
Macdonald, I. (2003) Applying uncertainty considerations to building energy conservation equations. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.
McDougall, Stuart and Hand, Jon (2003) Using simulation to move from daylighting issues to first use of the new UK carbon emissions calculation method. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.
McInnes, Colin and Hughes, Gareth W. and Macdonald, M. (2003) Low cost Mercury orbiter and Mercury sample return missions using solar sail propulsion. Aeronautical Journal, 107 (1074). pp. 469-478. ISSN 0001-9240
Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. Wear, 255 (1-6). pp. 14-22. ISSN 0043-1648
Tamburrini, M. and Palmer, D. and Macdonald, I. (2003) Calibrating models for simulation use in design practice. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.
Chow, T.T. and Hand, J. and Strachan, P.A. (2003) Building-integrated photovoltaic and thermal applications in a subtropical hotel building. Applied Thermal Engineering, 23 (16). pp. 2035-2049. ISSN 1359-4311
Zhang, Yonghao and Emerson, David and Reese, Jason (2003) General theory for flow optimisation of split-flow thin fractionation. Journal of Chromatography A, 1010 (1). pp. 87-94. ISSN 0021-9673
Lockerby, Duncan A. and Reese, J.M. (2003) High-resolution Burnett simulations of micro Couette flow and heat transfer. Journal of Computational Physics, 188 (2). pp. 333-347. ISSN 0021-9991
Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Inertial errors of forceplate analysis of artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.
Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Player/ground interactions on artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.
Brachet, P. and Blackburn, S.J. and Nicol, A.C. and Walker, C.A. (2003) Body and limb accelerations during football activities on artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.
Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Mechanical properties of an artificial turf using servo-hydraulic and drop-weight impact testers. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.
Gachagan, A. and Hailu, B. and McNab, A. and Lang, W. and Hendry, J. and Hayward, G. and Banks, W. (2003) Impact on the mechanical integrity of carbon fibre reinforced composite plates incorporating embedded piezoceramic transducers. In: 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2003-07-27 - 2003-08-01.
Nash, D.H. and Banks, W.M. (2003) Eliminating local strain concentrations on GRP beam supported transportation. In: 10th International Conference on Pressure Vessel Technology (ICPVT-10), 2003-07-07 - 2003-07-10.
Nash, D.H. and Spence, J. and Tooth, A.S. (2003) On the plastic collapse of horizontal saddle supported storage vessels. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, Design by Analysis, 2003-07-07 - 2003-07-10.
Spence, J. and Nash, D.H. (2003) Some milestones in pressure vessel technology: The Nichols Memorial Lecture - Keynote Lecture. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, 2003-07-07 - 2003-07-10.
Beausoleil-Morrison, I. and Clarke, J.A. (2003) An adaptive conflation between computational fluid dynamics and thermal simulation for modelling indoor air flow and convective heat transfer at internal building surfaces. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 109 (2). pp. 743-756. ISSN 0001-2505
Carles, P. and Dadzie, K. and Zhong, F. (2003) The piston effect as a means to measure near-critical bulk viscosity. In: UNSPECIFIED.
Trontis, A. and Spathopoulos, M.P. (2003) On the control synthesis for target problems in continuous and hybrid systems using level set methods. In: Proceedings of the 11th IEEE Mediterranean Conference on Control and Automation MED 03, 2003-06-17 - 2003-06-20.
Brodesser, Monika and Banks, W.M. and Pethrick, R.A. and Casey, N. and Brown, J.; Chung, J.S. and Matsui, T., eds. (2003) The chemical compatibility of thermoplastic hose used in umbilicals. In: Proceedings of the 13th (2003) international offshore and polar engineering conference. International Offshore and Polar Engineering Conference Proceedings . International Society of Offshore & Polar Engineers, USA, pp. 1-7. ISBN 1880653605
Shih, M. and Banks, W.M. (2003) New design concept of epoxy resin formulation applied to fibre reinforced plastics. In: Society for the Advancement of Materials and Process Engineering Conference, SAMPE 03, 2003-05-11 - 2003-05-15.
Fleming, J.S. and Yan, Y. (2003) The prediction of vapour-liquid equilibrium behaviour of HFC blend-oil mixtures from commonly available data. International Journal of Refrigeration, 26 (3). pp. 266-274. ISSN 0140-7007
Wood, J. and Nash, D.H. (2003) Some observations on the education and professional development of finite element users. In: Proceedings of the NAFEMS World Congress on Innovative Engineering Simulation Technology, 2003-05-27 - 2003-05-31.
Zhang, Y.H. and Reese, J.M. (2003) Gas turbulence modulation in a two-fluid model for gas-solid flows. AIChE Journal, 49 (12). pp. 3048-3065. ISSN 0001-1541
Comlekci, T. and Camilleri, D. and Gray, T.G.F.; (2003) Finite element representation on experimental surface deformation data from fusion welded plates. In: Computational Mechanics in the UK : proceedings of the 11th ACME-UK 2003 Conference. University of Strathclyde, Glasgow, UK, pp. 33-36.
Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle supported storage vessels - a parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., pp. 109-135. ISBN 978-1-86058-401-5
Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle supported storage vessels - theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., pp. 87-107. ISBN 978-1-86058-401-5
Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle-supported storage vessels: A parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 109-138. ISBN 978-1-86058-401-5
Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle-supported storage vessels: Theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 87-108. ISBN 978-1-86058-401-5
Zhang, Y.H. and Reese, J.M. (2003) Continuum modelling of granular particle flow with inelastic inter-particle collisions. Chemical Engineering Research and Design, 81 (4). pp. 483-488. ISSN 0263-8762
Zhang, Y.H. and Reese, J.M. (2003) The drag force in two-fluid models of gas-solid flows. Chemical Engineering Science, 58 (8). pp. 1641-1644. ISSN 0009-2509
Camilleri, D. and Comlekci, T. and Lee, C.K. and Gray, T.G.F. (2003) Out-of-plane distortion of CMn steel plates during flux-cored CO2 automatic butt welding. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.
McPherson, N.A. and Chi, K. and Baker, T.N. (2003) Submerged arc welding of stainless steel and the challenge from the laser welding process. Journal of Materials Processing Technology, 134 (2). pp. 174-179. ISSN 0924-0136
Citherlet, Stéphane and Macdonald, Iain (2003) Integrated assessment of thermal performance and room acoustics. Energy and Buildings, 35 (3). pp. 249-255. ISSN 0378-7788
Pan, W. and Wheel, M. (2003) A finite volume method for solid mechanics incorporating rotational degrees of freedom. Computers and Structures, 81 (5). pp. 321-329. ISSN 0045-7949
Oliveira, Monica and Fitch, A.W. and Ni, X. (2003) A study of velocity and residence time of single bubbles in a gassed oscillatory baffled column : Effect of oscillation amplitude. Journal of Chemical Technology and Biotechnology, 78 (2-3). pp. 220-226. ISSN 0268-2575
McPherson, N.A. and Chi, K. and McLean, M.S. and Baker, T.N. (2003) Structure and properties of carbon steel to duplex stainless steel submerged arc welds. Materials Science and Technology, 19 (2). pp. 219-226. ISSN 0267-0836
Oliveira, Monica and Fitch, A.W. and Ni, X. (2003) A study of bubble velocity and bubble residence time in a gassed oscillatory baffled column : Effect of oscillatory frequency. Chemical Engineering Research and Design, 81 (2). pp. 233-242. ISSN 0263-8762
Stickland, M.T. and Scanlon, T.J. and Fernandez-Francos, J. and Blanco, E. (2003) Measurement of rotating flows using PIV and image derotation. Experiments in Fluids, 34 (2). pp. 304-306. ISSN 1432-1114
Zaras, J. and Kowal-Michalska, K. and Rhodes, J. (2003) Buckling strength and failure mechanics of thin-walled structures. Thin-Walled Structures, 41 (2-3). pp. 89-90. ISSN 0263-8231
Abo-Elnor, Mootaz and Hamilton, R. and Boyle, James (2003) 3D Dynamic analysis of soil-tool interation using the finite element method. Journal of Terramechanics, 40 (1). pp. 51-62. ISSN 0022-4898
Macdonald, Martin and Rhodes, James and Kotelko, Maria (2003) Load capacity of combined steel/aluminium members under bending action - experimental study. In: 16th Science Conference on The Problems in Development of Heavy Duty Machines, 2003-01-01.
Abid, Muhammad and Nash, David (2003) Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions. International Journal of Pressure Vessels and Piping, 80 (12). pp. 831-841. ISSN 0308-0161
Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2003) Investigation of the solvent uptake in adhesively bonded CFRP joints using non-destructive dielectric and destructive mechanical techniques. In: 14th International Conference on Composite Materials, 2003-07-14 - 2003-07-18.
Banks, W.M. and Nash, D.H. (2003) Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc.. ISBN 978-1-86058-401-5
Carus, D. (2003) Practicalities and openability of packaging. In: CCFRA Food Packaging Conference, 2003-01-01.
Carus, D. and Doyle, Mike (2003) The EU package project - bringing eCommerce into the home. In: Faraday Packaging Partnership Conference, 2002-04-01.
Chen, Haofeng and Engelhardt, M.J. and Ponter, Alan R.S. (2003) Linear matching method for creep rupture assessment. International Journal of Pressure Vessels and Piping, 80. pp. 213-220. ISSN 0308-0161
Clarke, J. and Dolado, J. J. and Harman, M. and Hierons, R. and Jones, B. and Lumkin, M. and Mitchell, B. and Mancoridis, S. and Rees, K. and Roper, M. and Shepperd, M. (2003) Reformulating Software Engineering as a Search Problem. IEE Proceedings Software, 150 (3). pp. 161-175. ISSN 1462-5970
Earland, Simon and Nash, David and Garden, W. (2003) Guide to European pressure equipment: the complete reference source. Professional Engineering : Published in association with Roles & Associates, Bury St. Edmunds, UK. ISBN 1860583458
Ellery, Alex and Barnes, Dave and Buckland, Rodney and Welch, Chris and Garry, James and Zarnecki, John and Gebbie, Jonathan and Green, Ashley and Smith, Mark and Hall, David and McInnes, Colin and Winfield, Alan and Nehmzow, Ulrich and Ball, Andrew (2003) The UK space and planetary robotics network. JBIS, Journal of the British Interplanetary Society, 56 (9-10). pp. 328-337. ISSN 0007-084X
Fleming, J.S. (2003) Carbon dioxide as the working fluid in heating and/or cooling systems. Bulletin of the International Institute of Refrigeration, 83 (4). pp. 7-15. ISSN 0020-6970
Fleming, J.S. (2003) The requirements of HFC refrigerants in a competitive environment. Proceedings of the Institute of Refrigeration, 99.
Freund, Sebastian and Kummert, Michael (2003) New TRNSYS types to simulate air-to-air energy recovery. In: TRNSYS Users day and Training, 2003-03-24 - 2003-03-26.
Galloway, A. (2003) DefStan 03-34 Issue 3 Arc Welding of Ferrous Armour. Other. Ministry of Defence.
Grant, A.D. and Fulton, J.K.M. and Hopfe, H.H. and Hopfe, W.A.; (2003) A wave energy conversion module for electricity or water production. In: Proceedings of the 5th European Wave Energy Conference. IAHR.
Gray, T.G.F. and Crowther, P. and Prag, N.; Banks, W.M. and Nash, D.H., eds. (2003) Structural mechanics approaches to weld integrity assessment for pressure vessel attachments. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., London, UK, pp. 249-267. ISBN 1860584012
Hobbs, D.J.N. and Morbitzer, C. and Spires, B. and Strachan, P.A. and Webster, J.; (2003) Experience of using building simulation within the design process of an architectural practice. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association.
Hobbs, Dan and Morbitzer, Christoph and Spires, Brian and Strachan, Paul and Webster, Jim; (2003) The use of building simulation within an architectural practice. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institute of Building Service Engineers (CIBSE).
Ibrahim, A.G.M. and Fleming, J.S.; (2003) Leakage characteristics of CO2 reciprocating compressors at off design conditions. In: Compressors and Their Systems: 2nd International Conference. IMechE conference transactions (4). John Wiley & Sons Inc., pp. 111-122. ISBN 978-1-86058-417-6
Ibrahim, A.G.M. and Fleming, J.S.; (2003) Performance assessment of a trans-critical CO2 heat pump using a reciprocating compressor. In: Proceedings of the 21st International Institute of Refrigeration Congress. International Institute of Refrigeration. ISBN 2-913149-32-4
Johnstone, C. and Bronsdon, C. and Wallace, R. and Bryden, I. and Wolfram, J. and Bradshaw, A.; (2003) The EPSRC Marine Energy Research Programme: The focus and methodology. In: Proceedings of the 5th European Wave Energy Conference. IAHR.
Kelly, N.J. (2003) Small-scale energy storage in a distributed future. In: Storage of Renewable Energy Strategies and Technologies to Meet the Challenge, 2003-11-27.
Kelly, N.J. and Clarke, J.A. and Strachan, P.A. (2003) Improvement of transport safety by simulation-based control of fog production in a chamber - Final Report for Project G6RD-CT-2000-00211. European Commission.
Knight, Peter T. and Banks, W.M. (2003) The assessment of complex learning outcomes. Global Journal of Engineering Education, 7 (1). pp. 39-50. ISSN 1328-3154
Leipold, M. and Fichtner, H. and Heber, B. and Groepper, P. and Lascar, S. and Dachwald, Bernd and Hughes, Gareth W. and McInnes, Colin (2003) Heliopause explorer: a sailcraft mission to the outer boundaries of the solar system. Acta Astronautica, 59 (8-11). pp. 785-796. ISSN 0094-5765
Lubis, A. and Boyle, J.T.; Banks, W.M. and Nash, D.H., eds. (2003) An assessment of the pressure reduction effect in piping elbows under plane moment loading. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Limited; John Wiley and Sons, London, UK, pp. 25-40. ISBN 1860584012
MacKenzie, P.M.; (2003) Moire interferometry and crack closure. In: Handbook of Moire Measurement (Series in Optics and Optoelectronics). Taylor and Francis, pp. 110-119. ISBN 0750305223
MacKenzie, P.M. and Walker, C.A.; (2003) Experimental and computational assessment of the T* fracture parameter during creep relaxation. In: Handbook of Moiré Measurement (Series in Optics and Optoelectronics). Taylor and Francis, pp. 103-109. ISBN 0750305223
Macdonald, Martin and Rhodes, James and Taylor, G.T.; (2003) Load capacity of eccentrically loaded stainless steel columns. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishisng Limited, London, UK, pp. 149-170. ISBN 1860584012
Mackenzie, D. and Hamilton, R. and Muscat, Martin (2003) Evaluating shakedown under proportional loading by non-linear static analysis. Computers and Structures, 81 (17). pp. 1727-1737. ISSN 0045-7949
Makulsawatudom, P. and Mackenzie, D. and Hamilton, R.; Banks, W.M. and Nash, D.H., eds. (2003) Shakedown behaviour of thick cylindrical vessels with crossholes. In: Pressure Equipment Technology. Professional Engineering Publishers, London, UK, pp. 67-86. ISBN 978-1-86058-401-5
McInnes, C.R. (2003) Gravity-turn descent from low circular orbit conditions. Journal of Guidance, Control and Dynamics, 26 (1). pp. 183-185. ISSN 1533-3884
McInnes, C.R. (2003) Inverse solar sail trajectory problem. Journal of Guidance, Control and Dynamics, 26 (2). pp. 369-371. ISSN 1533-3884
McInnes, C.R. (2003) Orbits in a generalized two-body problem. Journal of Guidance, Control and Dynamics, 26 (5). pp. 743-749. ISSN 1533-3884
McInnes, C.R. (2003) Solar sailing: orbital mechanics and mission applications. Advances in Space Research, 31 (8). pp. 1971-1980. ISSN 0273-1177
McInnes, C.R. (2003) Velocity field path-planning for single and multiple unmanned ariel vehicles. Aeronautical Journal, 107 (1073). pp. 419-426. ISSN 0001-9240
McInnes, Colin R. (2003) Azimuthal repositioning of payloads in heliocentric orbit using solar sails. Journal of Guidance, Control and Dynamics, 26 (4). pp. 662-664. ISSN 1533-3884
McInnes, Colin R. (2003) Instability of fixed, low-thrust drag compensation. Journal of Guidance, Control and Dynamics, 26 (4). pp. 655-657. ISSN 1533-3884
McInnes, Colin R. (2003) Non-linear dynamics of ring world systems. JBIS, Journal of the British Interplanetary Society, 56 (9-10). pp. 308-313. ISSN 0007-084X
McQuade, F. and Ward, R. and Ortix, F. and McInnes, C.R.; (2003) The autonomous configuration of satellite formations using generic potential functions. In: Proceedings of the 3rd International Workshop on Satellite Constellations and Formation-Flying. International Astronautical Federation.
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2003) A method for determining X-ray elastic constants for the measurement of residual stress. Strain, 39 (1). pp. 3-10. ISSN 0039-2103
Muscat, Martin and Mackenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161
Oliveira, Monica (2003) Characterisation of a gas-liquid oscillatory baffled column. PhD thesis, UNSPECIFIED.
Prazeres, L.M.R. and Clarke, J.A. (2003) Communicating building simulation outputs to users. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.
Radice, G. and McInnes, C. R. (2003) Autonomous behavioural algorithm for space applications. Aeronautical Journal, 107 (1074). pp. 521-527. ISSN 0001-9240
Rhodes, J. (2003) On the development of simple user-friendly microcomputer programs for structural analysis: Some personal thoughts. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12.
Rhodes, J. (2003) Some observations on the post-buckling behaviour of thin plates and thin-walled members. Thin-Walled Structures, 41 (2-3). pp. 207-226. ISSN 0263-8231
Rhodes, J. and Macdonald, Martin (2003) Behaviour of stainless steel columns under combined bending and axial compression loading. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12.
Roy, Mannish and Stack, Margaret (2003) An electrochemical technique to measure wear of metals in polymers in corrosive environments. In: Tribology - Science and Application Conference, 2003-04-23 - 2003-04-27.
Samuel, A. and Imbabi, M. S. and Peacock, A. and Strachan, P.A.; (2003) An engineering approach to modelling of dynamic insulation using ESP-r. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institute of Building Service Engineers (CIBSE).
Spathopoulos, M.P. (2003) On a simplified untiming procedure for supervisory control of timed automata when the time increases strictly monotonically. International Journal of Control, 76 (17). pp. 1739-1748. ISSN 0020-7179
Spathopoulos, M.P. (2003) On supervisory control for timed automata using urgency - invited session. In: IEEE Conference on Methods and Models in Automation and Robotics, 2003-08-01.
Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. Wear, 255 (1-6). pp. 456-465. ISSN 0043-1648
Stack, Margaret and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. Wear, 255 (1-6). pp. 225-236. ISSN 0043-1648
Stickland, M.T. and McKay, S. and Scanlon, T.J. (2003) The development of a three-dimensional imaging system and its application in computer aided design workstations. Mechatronics, 13 (5). pp. 521-532. ISSN 0957-4158
Stickland, M.T. and Scanlon, T.J. and Craighead, I.A. and Fernandez, J. (2003) An investigation into the mechanical damping characteristics of catenary contact wires and their effect on aerodynamic galloping instability. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 217 (2). pp. 63-71. ISSN 0954-4097
Stickland, M.T. and Scanlon, T.J. and Vidinha, T. and Langlands, K.C. and Dempster, W.M. and Jaryczewski, R. and Langlands, Kim Corell (2003) The development and application of time resolved PIV at the University of Strathclyde. Experiments in Fluids, 177. pp. 199-207. ISSN 1432-1114
Strachan, P.A.; (2003) Simulation in support of outdoor testing of building components. In: Proceedings of the Dynamic Analysis and Modelling Techniques for Energy in Buildings Conference. DAME-BC.
Trendafilova, I. (2003) State space modelling and representation for vibration-based damage assessment. Key Engineering Materials, 246. pp. 547-555. ISSN 1013-9826
Trendafilova, I. (2003) A state space based approach to health monitoring of vibrating structures. Materials Science Forum, 440-441. pp. 203-210. ISSN 1662-9760
Trendafilova, I. and Heylen, W. (2003) Categorisation and pattern recognition methods for damage localisation from vibration measurements. Mechanical Systems and Signal Processing, 17 (4). pp. 825-836. ISSN 0888-3270
Trendafilova, I. and Van Brussel, H.H. (2003) Condition monitoring of robot joints using statistical and nonlinear dynamics tools. Meccanica, 38 (2). pp. 283-295. ISSN 0025-6455
Trontis, A. and Spathopoulos, M.P.; (2003) Hierarchical control synthesis for eventuality specifications in hybrid systems - Invited Session. In: Proceedings of the IFAC Conference on Analysis and Design of Hybrid Systems. International Federation of Automatic Control (IFAC).
Trontis, A. and Spathopoulos, M.P. (2003) Hybrid control synthesis for eventuality specifications using level set methods. International Journal of Control, 76 (16). pp. 1599-1627. ISSN 0020-7179
Trontis, A. and Spathopoulos, M.P. (2003) Supervisory target control for hybrid systems. International Journal of Control, 76 (11). pp. 1142-1158. ISSN 0020-7179
Vezza, M. and Taylor, Ian and Donnellan, B. and Brown, C. (2003) Static and aeroelastic flow control using a discrete vortex method. In: 11th International Conference on Wind Engineering, 2003-06-02 - 2003-06-05.
Walker, C.A. (2003) Handbook of Moire Measurement. Optics and Optoelectronics . Taylor and Francis. ISBN 0750305223
Wood, J. (2003) Analysis and simulation tools for engineering designers. In: NAFEMS Workshop, 2003-12-01.
Wood, J. (2003) Examination of cross-industry best practice in the modelling of details common in fabricated plate/shell construction. In: The 5th FENET Technical Workshop, 2003-10-01.
Wood, J. (2003) The cardinal sins of FEA: Part I. BENCHmark, 99. p. 99. ISSN 0951-6859
Wood, Jim (2003) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 4th FENET Technology Workshop, 2003-02-26.
Zhang, J. and Baker, T.N. (2003) Effect of equalisation time on the austenite grain size of simulated thin slab direct charged (TSDC) vanadium microalloyed steels. ISIJ International, 43 (12). pp. 2015-2022. ISSN 0915-1559
2002
Kelly, N.J. and Beausoleil-Morrison, I.; (2002) Simulation of modern heat and power systems for buildings. In: Proceedings of 6th International Conference on Systems Simulation in Buildings. SSB, BEL.
Blanco, E. and Fernandez-Vina, F. and Fernandez-Oro, J. and Scanlon, T.J. and Stickland, M.T. (2002) Analisis numerico de una bomba semiaxial. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.
Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, part III: investigation of mechanical strength. Journal of Adhesion, 78 (12). pp. 1027-1038. ISSN 0021-8464
Fernandez, J. and Blanco, E. and Fernandez-Oro, J. and Stickland, M.T. and Scanlon, T.J. (2002) Estudio numerico de las condiciones de estabilidad de estructuras bidimensionales bajo carga aerodinamica. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.
Thomason, J.L. (2002) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP. Composites Part A: Applied Science and Manufacturing, 33 (12). pp. 1641-1652. ISSN 1359-835X
Trontis, A. and Spathopoulos, M.P. (2002) The batch evaporator: a case study of target control for hybrid systems using level set methods. In: 41st IEEE Conference on Decision and Control, 2002-12-10 - 2002-12-13.
Xia, H. and Pang, Y. and Spathopoulos, M.P. (2002) Approximate analysis of supervisory target control for hybrid systems. In: 41st IEEE Conference on Decision and Control, 2002-12-10 - 2002-12-13.
Nash, D.H. (2002) Differences between EN13445 and other international standards. In: Pressure Equipment in Europe Conference, 2002-11-19 - 2002-11-20.
Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, P.A. (2002) Simulation-assisted control in building energy management systems. Energy and Buildings, 34 (9). pp. 933-940. ISSN 0378-7788
Zhang, Yong Liang and Reese, Jason M. and Gorman, Daniel G. (2002) Finite element analysis of the vibratory characteristics of cylindrical shells conveying fluid. Journal of Sound and Vibration, 191 (45). pp. 5207-5231. ISSN 0022-460X
Parr, A.C.S. and O'Leary, R.L. and Hayward, G. and Smillie, G. and Benny, C.G. and Ewing, H.C. and MacKintosh, A.R.; (2002) Investigating the thermal stability of 1-3 piezoelectric composite transducers by varying the thermal conductivity and glass transition temperature of the polymeric filler material. In: 2002 IEEE Ultrasonics Symposium Proceedings. Ultrasonics Symposium . IEEE, DEU, pp. 1173-1176. ISBN 0780375823
Abid, Muhammad and Nash, David and Webjorn, Jan (2002) Risk assessment studies of gasketed and non-gasketed bolted pipe joints. In: Proceedings of the 4th ASME International Pipelines Conference, 2002-10-01.
Macdonald, Martin and Rhodes, J. (2002) Finite element modelling of stainless steel columns in variation in mechanical properties. In: 16th International Speciality Conference on Cold-Formed Steel Structures, 2002-10-17 - 2002-10-18.
Mathew, M.T. and Stack, M.M. (2002) Micro-abrasion interactions of pure metals in bio-oils. In: Third International Symposium on Fuels and Lubricants, 2002-10-07 - 2002-10-09.
Rhodes, J. (2002) Post-buckling analysis of light-gauge members using finite strips. In: 16th International Speciality Conference on Cold-Formed Steel Structures, 2002-10-17 - 2002-10-18.
Xia, H. and Trontis, A. and Pang, Y. and Spathopoulos, M.P. (2002) Supervisory eventuality synthesis. In: 6th International Workshop on Discrete Event Systems (WODES 02), 2002-10-02 - 2002-10-04.
Kelly, N.J. and Beausoleil-Morrison, I.; (2002) Modelling and simulation of small-scale embedded generation systems. In: eSim2002, The Canadian Building Simulation Conference. European School for Industrial Mathematics (ESIM), pp. 153-160.
Oliveira, Monica and Fitch, A.W. and Ni, X. (2002) A study of velocity and resistance time of single bubbles in a gassed oscillatory baffled column : Effect of oscillation amplitude. In: United Engineering Foundation Conference on Process Innovation and Process Intensification, PI2, 2002-09-08 - 2002-09-13.
Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L.; Mittal, K.L, ed. (2002) Monitoring the solvent uptake in adhesive bonded joints using a novel non-destructive technique by applying high frequency dielectrics. In: Adhesive joints. VSP International Science Publishers. ISBN 9789067643719
Madhlopa, A. and Jones, S.A. and Saka, J.D.K. (2002) A solar air heater with composite-absorber systems for food dehydration. Renewable Energy, 27 (1). pp. 27-37. ISSN 0960-1481
Nash, D.H. (2002) Co-ordination and dissemination of European pressure equipment research. In: Opportunities in research and development for the pressure equipment industry, 2002-01-01.
Stack, M.M. and Mathew, M.T. (2002) Micro-abrasion mapping of steels: some thoughts on the construction of micro-abrasion maps. In: International Conference on Materials and Tribology, 2002-09-12 - 2002-09-13.
Doherty, N. and Scanlon, T.J. and Stickland, M.T. and Waddell, P. (2002) An experimental and numerical analysis of flow in a ShockWave power generator. In: 10th International Symposium on Flow Visualisation, 2002-08-26 - 2002-08-29.
Lappa, M. and Savino, R. (2002) 3D analysis of crystal/melt interface shape and Marangoni flow instability in solidifying liquid bridges. Journal of Computational Physics, 180 (2). pp. 751-774. ISSN 0021-9991
Bartak, M. and Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Melikov, A. and Popiolek, Z. and Stankov, P. (2002) Integrating CFD and building simulation. Building and Environment, 37 (8-9). pp. 865-871. ISSN 0360-1323
Citherlet, S. and Hand, Jon (2002) Assessing energy, lighting, room acoustics, occupant comfort and environmental impacts performance of building with a single simulation program. Building and Environment, 37 (8-9). pp. 845-856. ISSN 0360-1323
Banks, W.M. (2002) How much resource should be invested in training less qualified school leavers and less experienced engineers? In: Sharing Best Practice on Overcoming the Engineering Skills Shortage (The Engineer Conferences), 2002-07-01.
Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E. (2002) Manufacturing considerations in the support of large GRP storage vessels. In: Sixth International Conference on Flow Process in Composite Materials (FPCM-6), 2002-07-15 - 2002-07-17.
Osman, M.M. and Engler, O. and Karhausen, K. and McLaren, Andrew (2002) The influence of homogenisation heat treatment on microstructure development in Al-Mg-Mn alloy AA5454. In: 8th International Conference on Aluminium Alloys, 2002-07-02 - 2002-07-05.
Reddy, D.N. and Scanlon, T.J. and Kuo, C. (2002) Prediction of slam loads on a wedge section using computational fluid dynamics (CFD) techniques. In: Twenty-fourth Symposium on Naval Hydrodynamics, 2002-07-08 - 2002-07-13.
Trontis, A. and Xia, H. and Pang, Y. and Spathopoulos, M.P.; Basanez, Luis, ed. (2002) Target control for hybrid systems. In: 15th IFAC World Congress on Automatic Control, 2002-07-21 - 2002-07-26.
Dempster, W.M. and Wheel, M. (2002) Engineering analysis: a pre-requisite for design. In: 2002 ASEE Annual Conference and Exposition, 2002-06-16 - 2002-06-19.
Hamilton, R. and Boyle, James (2002) Simplified lower bound limit analysis of transversely loaded thin plates using generalised yield criteria. Thin-Walled Structures, 40 (6). pp. 503-522. ISSN 0263-8231
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2002) Modal analysis of a lightweight structure - investigation of the effects of the supports on the structural dynamics. Mechanical Systems and Signal Processing, 16 (2-3). pp. 273-284. ISSN 0888-3270
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2002) Use of static stress for modification of welding residual stress. Science and Technology of Welding and Joining, 7 (1). pp. 51-55. ISSN 1362-1718
Osman, M.M. and McLaren, Andrew (2002) The influence of homogenisation practice on the recrystallisation kinetics of Al-Mg-Mn alloy AA5454. In: Proceedings of Thermomechanical Processing: Mechanics, Microstructure and Control Conference, 2002-06-01.
Wheel, M. and Dempster, W.M. (2002) Teaching engineering analysis within an interactive studio teaching environment. In: 3rd Global Congress on Engineering Education, 2002-06-30 - 2002-07-05.
Xia, H. and Pang, Y. and Spathopoulos, M.P. (2002) Eventuality synthesis for controlled linear automata. In: 20th Annual American Control Conference (ACC), 2002-05-08 - 2002-05-10.
Carus, D. (2002) PACKAGE - Provision for improved lifestyles via Access to Consumer pacKAGEs. In: Proceedings of the International Conference on Assistive Technology, ICAT 2002, The British Computer Society Disability Group, 2002-04-24 - 2002-04-25.
Trendafilova, I. (2002) Non-linear dynamics characteristics for damage detection. In: Third International Conference on Identification in Engineering Systems, 2002-04-15 - 2002-04-17.
Zhang, Yong Liang and Reese, Jason M. and Gorman, Daniel G. (2002) A comparative study of axisymmetric finite elements for the vibration of thin cylindrical shells conveying fluid. International Journal for Numerical Methods in Engineering, 54 (1). pp. 89-110. ISSN 0029-5981
Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L.; (2002) Assessment of water ingress in adhesively bonded composite structures using dielectric spectroscopy. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506
Zhang, Y.L. and Reese, J.M. and Gorman, D.G. (2002) Initially tensioned orthotropic cylindrical shells conveying fluid: a vibration analysis. Journal of Fluids and Structures, 16 (1). pp. 53-70. ISSN 0889-9746
Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2002) Experience with classroom feedback systems to enable Socratic dialogue in large engineering classes. In: 2nd Annual Symposium on Engineering Education, 2002-01-01.
Alexander, D. and McInnes, C.R. and Angelopoulos, V. and Sandeman, A.W. and Macdonald, M.; El-Genk, Mohammed S., ed. (2002) Geosail: A novel solar sail mission concept for geospace. In: Proceeding of the AIP Space Technology and Appications International Forum/Staif 2002, Innovative Transportation Systems and Beyond. American Institute of Physics, pp. 305-312. ISBN 1-56396-980-7
Alexander, D. and Sandman, A.W. and McInnes, C.R. and Macdonald, M. and Ayton, J. and Murphy, N. and Angelopoulos, V. (2002) GeoSail: a novel magnetospheric space mission utilizing solar sails. In: 53rd International Astronautical Congress, 2002-10-10 - 2002-10-19.
Banks, W.M. (2002) Profession misrepresented. Professional Engineering, 15 (6). p. 19. ISSN 0953-6639
Banks, W.M. and Hayward, D. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L.; (2002) Developments in dielectric techniques for non-destructive examination. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506
Blanco, E. and Fernandez, J. and Scanlon, T.J. and Stickland, M.T.; (2002) A numerical analysis of a mixed flow pump. In: Proceedings of the ASME Joint US-European Fluids Engineering. ASME, pp. 791-798. ISBN 0791836150
Boinard, P. and Banks, W.M. and Pethrick, R.A.; Miyano, Yasushi and Cardon, Albert H. and Reifsnicker, Ken L. and Fukada, Hiroshi and Ogihara, Shinji, eds. (2002) Dielectric spectroscopy technique to assess the durability of adhesively bonded composite joint structures. In: Durability analysis of composite systems 2001: proceedings of the Fifth International Conference on Durability Analysis of Composite Systems. Taylor & Francis, London, UK, pp. 101-108. ISBN 9058093824
Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part I: Water permeation in epoxy adhesive. Journal of Adhesion, 78 (12). pp. 1001-1014. ISSN 0021-8464
Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part II: Dielectric study. Journal of Adhesion, 78 (12). pp. 1015-1026. ISSN 0021-8464
Cichocki, F.R. and Thomason, J.L. (2002) Thermoelastic anisotropy of a natural fiber. Composites Science and Technology, 62 (5). pp. 669-678. ISSN 0266-3538
Clarke, J.A.; (2002) Performance prediction tools for low impact building design. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, FRA.
Clarke, J.A. and Johnstone, C. and Kim, J. and Strachan, P.A.; (2002) On-line energy services for smart homes. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, FRA.
Clarke, J.A. and Macdonald, Iain and Stankov, P. and Denev, J. and Melikov, A.; (2002) Local comfort and air quality quantification via integrated building simulation. In: Proceedings of Roomvent 2002 - 8th International conference on air distribution in rooms. IOP, pp. 401-404. ISBN 87-989117-0-8
Crichton, B.H. and Fouracre, R.A. and Gouda, H.A. and Stickland, M.T.; (2002) Sessile water droplets on insulating surfaces subject to high AC stress effect of contact angle. In: 37th International Universities Power Engineering Conference. Staffordshire University, GBR. ISBN 190413307X
Dannecker, R.K.W. and Grant, A.D. (2002) Investigations of a building-integrated ducted wind turbine module. Wind Energy, 5 (1). pp. 53-71. ISSN 1095-4244
Dempster, W.M. and Lee, C.K. and Boyle, J.T. (2002) Teaching of thermodynamics and fluid mechanics using interactive learning methods in large classes. In: ASEE Annual Conference and Exposition: Vive L'ingenieur, 2002-06-16 - 2002-06-19.
Doyle, G.T. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2002) Dielectric non-destructive examination of ageing of adhesively bonded structures. In: UNSPECIFIED.
Fernandez, J. and Blanco, E. and Fernandez-Oro, J. and Stickland, M.T. and Scanlon, T.J. (2002) Diseno de una bomba centrifuga : analisis numerico y experimental. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.
Fernandez, J. and Parrondo, J. and Scanlon, T.J. and Stickland, M.T.; (2002) A numerical and experimental flow analysis in a centrifugal pump with impeller-volute interaction. In: Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 0-08-044114-9
Gallego-Meana, J.M. and Craighead, I.A. and Casey, J.; (2002) Transmission of noise and vibration in canopied diesel driven power generating sets. In: Proceedings of ISMA 2002 International Conference on Noise and Vibration Engineering. ISMA, pp. 1771-1780.
Giua, A. and Smedinga, R. and Spathopoulos, M.P. and van Schuppen, J.H. (2002) Editorial introduction. Discrete Event Dynamic Systems, 12 (1). p. 5. ISSN 0924-6703
Hand, Jon and McElroy, Lori; (2002) Simulation, no problem, of course we offer this service! (observations on firms who have worked to make this true). In: Proceedings of eSim2002, The Canadian Building Simulation Conference. IBPSA.
Hughes, Gareth W. and McInnes, Colin; (2002) Mercury sample return missions using solar sail propulsion. In: Proceedings of the 53rd Astronautical Federation Congress. AIAA.
Hughes, Gareth W. and McInnes, Colin (2002) Solar sail hybrid trajectory optimization for non-Keplerian orbit transfers. Journal of Guidance, Control and Dynamics, 25 (3). pp. 602-604. ISSN 1533-3884
Jiang, Jiaren and Stack, Margaret and Neville, Anne (2002) Modelling the tribo-corrosion interaction in aqueous sliding conditions. Tribology International, 35 (10). pp. 669-679. ISSN 0301-679X
Jing, W.J. and McInnes, C.R. (2002) Memorised quasi-time fuel-optimal feedback control of perturbed double integrator. Automatica, 38 (8). pp. 1389-1396. ISSN 0005-1098
Li, L. and Yang, X. and Wood, J. (2002) A comparison of two numerical modelling approaches for the simulation of particle dispersion in a turbulent mixing layer. In: Proceedings of the 15th International Congress of Congress of Chemical and Process Engineering, 2002-08-25 - 2002-08-29.
Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N.; (2002) Evolution of precipitation in direct charged thin slab cast VoN and V-Ti-N steels. In: Proceedings of the Institute of Physics Conference: Electron Microscopy and Analysis Group Conference. Institute of Physics Conference series, 168 (11). Institute of Physics, Bristol, United Kingdom. ISBN 0750308125
Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2002) The evolution of microstructure during thin slab direct rolling processing in vanadium microalloyed steel. ISIJ International, 42 (6). pp. 636-644. ISSN 0915-1559
Macdonald, M. and McInnes, C.R.; (2002) Seasonal efficiencies of solar sailing in planetary orbit. In: Proceedings of 34th COSPAR Scientific Assembly, The Second World Space Congress. SAO/NASA Astrophysics Data System.
Macdonald, Malcolm and McInnes, Colin; (2002) Solar sail capture trajectories at Mercury. In: Proceedings of the AIAA/AAS Astrodynamics Specialist Conference and Exhibit. AIAA.
McIlwain, S.R. and Kenbar, A.M.R. and Lee, C.K. (2002) The influence of Corbel shape on bundle pressure drop of a crossflow heat exchanger. In: Proceedings of HTFS Research Symposium, 1900-01-01.
McInnes, C.R. (2002) Astronautical engineering revisited: planetary orbit modification using solar radiation pressure. Astrophysics and Space Science, 282 (4). pp. 765-772. ISSN 0004-640X
McInnes, C.R. (2002) Minimum mass solar shield for terrestrial climate control. JBIS, Journal of the British Interplanetary Society, 55 (9-10). pp. 307-311. ISSN 0007-084X
McInnes, C.R. (2002) Non-Keplerian orbits for Mars solar reflectors. JBIS, Journal of the British Interplanetary Society, 55 (3-4). pp. 74-84. ISSN 0007-084X
McInnes, C.R. (2002) Summary of RAS specialist discussion meeting on solar sail mission applications. Bulletin of the Special Astrophysical Observatory - North Caucasus, 122 (1170). pp. 252-254. ISSN 0320-9318
McInnes, C.R. (2002) The light cage limit to interstellar expansion. JBIS, Journal of the British Interplanetary Society, 55 (7-8). pp. 279-284. ISSN 0007-084X
Muscat, Martin and Hamilton, R. and Boyle, J.T. (2002) Shakedown analysis for complex loading using superposition. Journal of Strain Analysis for Engineering Design, 37 (5). pp. 399-412. ISSN 0309-3247
Muscat, Martin and Hamilton, Robert (2002) Elastic shakedown in pressure vessel components under non-proportional loading. ASME Publications PVP, 447. pp. 95-102. ISSN 0277-027X
Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E.; (2002) A parametric study of alternative support systems for cylindrical GRP storage vessels. In: Proceedings of the Third Australasian Conference on Composite Materials ( ACCM-3). ASTM International, Auckland, New Zealand.
Osman, M.M. and Engler, O. and Karhausen, K. and McLaren, Andrew (2002) The influence of homogenisation heat treatment on microstructure development in Al-Mg-Mn alloy AA5454. Materials Science Forum, 396-402 (1). pp. 351-356. ISSN 1662-9760
Pan, W. and Wheel, M. (2002) Including rotational degrees of freedom within a structural finite volume procedure. In: 10th UK Conference of the Association of Computational Mechanics in Engineering (ACME), 2002-04-14 - 2002-04-17. (Unpublished)
Ponter, Alan R.S. and Chen, Haofeng; Drew, H.R. and Pellegrino, S., eds. (2002) Linear matching methods for shakedown analysis. In: New Approaches to Structural Mechanics, Shells and Biological Structures. Solid Mechanics and Its Applications, 104 . Kluwer Academic Publishers, pp. 203-213.
Reese, J.M. and Lockerby, Duncan A.; Shahin, T.M.M., ed. (2002) A new design capability for hypersonic flight vehicles and microscale devices? In: Computer-based design: Engineering Design Conference 2002. John Wiley & Sons Inc., pp. 767-775. ISBN 1860583725
Rhodes, J. (2002) Buckling of thin plates and members - and early work on rectangular tubes. Thin-Walled Structures, 40 (2). pp. 87-108. ISSN 0263-8231
Rhodes, J. and Shanmugam, N.E.; Awrejcewics, J. and Andrianov, I.V., eds. (2002) Cienkoscienne profile zimno formowane we wspolczesnej technice (thin-walled cold-formed profiles in modern technology). In: Plyty I powloki w przyrodzie, mechanice I biomechanica (Plates and Shells in Nature, Mechanics and Biomechanics). Wydawnictwa Naukowo-Techniczne.
Rhodes, J. and Shanmugam, N.E.; Chen, W.F. and Liew, J.Y.R., eds. (2002) Cold formed steel structures. In: The civil engineering handbook. New directions in civil engineering . CRC Press, Boca Raton, USA; London, UK. ISBN 0849309581
Sing, W. and Baker, T.N.; (2002) Dry sliding wear behaviour of AA2014 alloy and AA2618 aluminium based composites. In: Proceedings of 1st International Conference on Materials Processing for Properties and Performance. UNSPECIFIED.
Stack, M.M. (2002) Editorial to: Special issue: Tribo-Erosion. Tribology International, 35 (10). pp. 615-616. ISSN 0301-679X
Stack, M.M. (2002) Mapping tribo-corrosion processes in dry and aqueous conditions: some new directions for the new Millennium. Tribology International, 35 (10). pp. 681-689. ISSN 0301-679X
Stack, M.M. and Chi, K. (2002) Effect of preferential dissolution on erosion-corrosion for chromium steel in alkali slurry. Transactions of the Non-Ferrous Metal Society of China, 12 (5). pp. 931-935. ISSN 1003-6326
Stack, M.M. and Pungwiwat, N. (2002) Particulate erosion of Al in aqueous conditions: some perspectives on pH effects on the erosion-corrosion map. Tribology International, 35 (10). pp. 651-660. ISSN 0301-679X
Stickland, M.T. and Scanlon, T.J. and Fernandez, J. and Blanco, E. and Parrondo, J.; (2002) A numerical and experimental analysis of flow in a centrifugal pump. In: Proceedings of the ASME Joint US-European Fluids Engineering Conference. ASME, pp. 703-708. ISBN 0791836150
Stickland, M.T. and Scanlon, T.J. and Fernandez, J. and Blanco, E. and Parrondo, J.; Rodi, W. and Fueyo, N., eds. (2002) A numerical flow simulation of a mixed flow pump. In: Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 0080441149
Stickland, M.T. and Waddell, Peter and Mason, S. and McKay, S. and Mair, L. (2002) Fluid flow analysis by a modified, white light, Lau interferometer. Experiments in Fluids. ISSN 1432-1114
Taylor, Ian and Vezza, M. (2002) Aeroelastic stability analysis of a bridge deck with added vanes using a discrete vortex method. Wind and Structures, 5 (2). pp. 277-290. ISSN 1226-6116
Taylor, Ian and Vezza, M.; (2002) Calculation of lateral flutter derivatives using a discrete vortex method. In: Proceedings of the 5th UK Conference on Wind Engineering. Anemos Associates, pp. 83-86. ISBN 1902996038
Taylor, Ian and Vezza, M.; (2002) Commercial computational wind engineering: contributions of DIVEX to recent design projects. In: Proceedings of the 5th UK Conference on Wind Engineering. Anemos Associates, pp. 91-94. ISBN 1902996038
Thomason, J.L. (2002) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? Composites Part A: Applied Science and Manufacturing, 33 (10). pp. 1283-1288. ISSN 1359-835X
Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass reinforced polypropylene. Composites Science and Technology, 62 (10-11). pp. 1455-1468. ISSN 0266-3538
Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass-reinforced polybutyleneterepthalate. Composites Part A: Applied Science and Manufacturing, 33 (3). pp. 331-339. ISSN 1359-835X
Thomason, J.L. and Adzima, L.J. (2002) Sizing up the interphase: An insider's guide to the science of sizing. Composites Part A: Applied Science and Manufacturing, 32 (3-4). pp. 313-321. ISSN 1359-835X
Thomason, J.L. and Cichocki, F.R.; (2002) Thermal anisotropy of a natural fibre. In: Proceedings of the Gordon Conference on Composites. Blackwell.
Trendafilova, I.; Balageas, Daniel L., ed. (2002) Vibration-based damage assessment using state-space representation of structural response. In: Proceedings of the 1st European Workshop on Structural Health Monitoring. Destech Publications. ISBN 978-1-932078-08-4
Trontis, A. and Xia, H. and Spathopoulos, M.P. (2002) Supervisory target control for hybrid systems. In: 15th IFAC World Congress 2002, 2002-07-21 - 2002-07-26.
Walker, C.A. and Blair, R. (2002) Leg stiffness and damping factors as a function of running speed. Sports Engineering, 5 (3). pp. 129-140. ISSN 1369-7072
Walker, C.A. and Gray, T.G.F. (2002) An evaluation of the test regimes for stab-resistant body armour. In: Designing Equipment for Body Protection Seminar, 2002-10-01.
Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N.; Aindow, M. and Kiely, C.J., eds. (2002) Nanoanalysis of dispersion strengthening particles in thin slab cast vanadium microalloyed steels. In: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group (EMAG 2001 Conference). EMAG Conference Series, 168 . Institute of Physics, London, United Kingdom, pp. 187-190. ISBN 0-7503-0812-5
Wood, J. (2002) Barriers to the effective use of finite element analysis in industry. In: FENET Workshop, 2002-02-27 - 2002-02-28.
Wood, J. (2002) Preliminary observations on the FENET industry needs survey and some recommendations. In: 2nd FENET Annual Industry Meeting, 2002-12-01.
Wood, J. (2002) Some thoughts on relevant educational and professional development issues for users of finite element systems. In: The 3rd FENET Technology Workshop, 2002-09-01.
Wood, J. (2002) A proposed user survey and possible approaches to reducing barriers to the effective use of FEA in industry. In: 2nd FENET Technology Workshop, 2002-06-13.
Wood, J. and Thomson, J. (2002) Web-based learning material for engineering analysis. In: NAFEMS/FENET Awareness Seminar on Web-based Training for Engineering Analysis, 2002-06-13 - 2002-06-14. (Unpublished)
Yan, Y. and Fleming, J.S.; (2002) The development of calculation techniques for HFC blend-oil behaviour. In: Proceedings of the 9th International Refrigeration and Air Conditioning Conference. Purdue University Printing Services.
Zhang, Y.L. and Reese, J.M. and Gorman, Daniel G. and Madhok, R. (2002) The vibration of an artery-like tube conveying pulsatile fluid flow. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 216 (1). pp. 1-11. ISSN 0954-4119
2001
Kennedy, A.R. and Smith, W.E. and Tackley, D.R. and David, W.I.F. and Shankland, K. and Brown, B. and Teat, S.J. (2001) Tetraaryl biphenyl diamine hole transport materials: a structural study utilizing both single crystal and high resolution powder diffraction. Journal of Materials Chemistry, 12. pp. 168-172. ISSN 0959-9428
Scanlon, T.J. and Stickland, M.T. (2001) An investigation into the aerodynamic characteristics of catenary contact wires in a cross-wind. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 215 (4). pp. 311-318. ISSN 0954-4097
Boyle, J.T. (2001) The design by analysis manual, European Commission, EUR-19030EN. Guide or manual. European Commission, Glasgow, UK.
Trontis, Anastasios and Spathopoulos, Michael P.; (2001) Target control for hybrid systems with linear continuous dynamics. In: Proceedings of the 40th IEEE Conference on Decision and Control. IEEE, pp. 1229-1234. ISBN 0780370619
Yew, C.K. and Boyle, J.T. and Mackenzie, D. (2001) A computer algebra based finite element development environment. Advances in Engineering Software, 32 (12). pp. 913-925. ISSN 0965-9978
McPherson, N.A. and Chi, K. and Noriega-Martinez, I. and Baker, T.N. (2001) Autogeneous laser welding of dessimilar joints of stainless steel and carbon steel. In: Stainless Steel World 2001, 2001-11-13 - 2001-11-15.
Oliveira, Monica and Ni, X. (2001) Gas hold-up and bubble diameters in a gassed oscillatory baffled column. Chemical Engineering Science, 56 (21-22). pp. 6143-6148. ISSN 0009-2509
Boyle, J.T. and Hamilton, R. and Dempster, W.M. (2001) Approaches to teaching and learning in engineering education (NATALIE) project. In: International Colloquium: Global Changes in Engineering Education, Proceedings of Ed-Media 2001 World Conference on Education Multi Media, 2001-10-01.
Galbraith, G.H. and Li, J. and McLean, R.C. and Baker, P.H. (2001) The influence of space discretization on the accuracy of numerical simulation of heat and moisture transport in porous building materials. Journal of Thermal Envelope and Building Science, 25 (2). pp. 143-160. ISSN 1097-1963
Oliveira, Monica and Ni, X. (2001) Gas hold-up and bubble diameters in a gassed oscillatory baffled column. In: 5th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering, Part of 5th World Congress of Chemical Engineering, 2001-09-23 - 2001-09-27.
Clarke, J.A. (2001) Energy Simulation in Building Design. Butterworth - Heinemann, Oxford, UK. ISBN 9780750650823
Carus, D. (2001) European research themes. In: European Conference on Computational Mechanics and Engineering Practice, 2001-09-19 - 2001-09-21.
Langlands, K.C. and Scanlon, T.J. and Stickland, M.T. (2001) An experimental and numerical analysis of flow near a pump intake using particle image velocimetry and computational fluid dynamics. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14.
Quinonez-Varela, G. and Cruden, A.J. and Grant, A.D. and Castaneda, A. (2001) Electrical integration assessment of wind turbines into industrial power systems : the case of a mining unit. In: PPT 2001IEEE Porto Power Tech Conference, 2001-09-10 - 2001-09-13.
Craighead, I.A. and Thackery, S. and Redstall, M. and Thomas, M.R. (2001) Monitoring wood decay in poles by the vibroacoustic method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (8). pp. 905-917. ISSN 0954-4062
McElroy, L.B. and Clarke, J.A. and Hand, Jon (2001) Delivering simulation to the design profession: the next stage? In: Proceedings of the 7th International Building Performance Simulation Association Conference, 2001-08-13 - 2001-08-15.
Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2001) The use of classroom feedback systems to enable active learning in large engineering mechanics classes. In: International Conference on Engineering Education 2001, 2001-08-06 - 2001-08-10.
Lamb, Wilson and Murdoch, Ian and Stewart, John (2001) On an operator identity central to projection operator methodology. Physica A: Statistical Mechanics and its Applications, 298 (1). pp. 121-139. ISSN 0378-4371
Zhang, Y.L. and Gorman, Daniel G. and Reese, J.M. (2001) A finite element method for modelling the vibration of initially tensioned thin-walled orthotropic cylindrical tubes conveying fluids. Journal of Sound and Vibration, 245 (1). pp. 93-112. ISSN 0022-460X
Born, F. J. and Clarke, J. A. and Johnstone, C. M.; (2001) Development and demonstration of a renewable energy based demand/supply decision support tool for the building design profession. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA, pp. 245-250. ISBN 8590193934
Shih, J. and Banks, W.M.; Hoa, S.V. and Johnston, Andrew and Denault, Johanne, eds. (2001) A study of the effects of manufacturing variables and solvents on the mechanical properties of carbon fibre composites. In: Design, Manufacturing and Application of Composites. Technomic Publishing Company, Lancaster, Pennsylvania, pp. 183-190. ISBN 9781587161148
Taylor, Ian and Vezza, M. (2001) Application of a discrete vortex method for the analysis of suspension bridge deck sections. Wind and Structures, 4 (4). pp. 333-352. ISSN 1226-6116
Munsi, A.S.M.Y. and Walker, C.A. and Waddell, A.J. (2001) Vibratory stress relief - an investigation of the torsional stress effect in welded shafts. Journal of Strain Analysis for Engineering Design, 36 (5). pp. 453-464. ISSN 0309-3247
McInnes, C.R. and Macdonald, M. and Angelopoulos, V. and Alexander, D. (2001) GeoSail: exploring the geomagnetic tail using a small solar sail. Journal of Spacecraft and Rockets, 38 (4). pp. 622-629. ISSN 0022-4650
Muscat, Martin and Mackenzie, D. (2001) Shakedown analysis of axi-symmetric nozzles. In: Proceedings of the ASME Pressure Vessels and Piping Conference, 2001-07-22 - 2001-07-26.
Vargas, José V.C. and Fleming, J.S. and Parise, José A.R. (2001) Maximum exergy input rate from a hot stream in solar driven refrigerants. International Journal of Energy Research, 25 (9). pp. 751-767. ISSN 0363-907X
Monti, R. and Savino, R. and Lappa, M. (2001) On the convective disturbances induced by g-jitter on the space station. Acta Astronautica, 48 (5-12). pp. 603-615. ISSN 0094-5765
Armstrong, B. and Beveridge, J.R. and Born, F. and Bronsdon, C. and Clarke, J.A. and Johnstone, C. and Macrae, I.M. and McDonald, J.R. (2001) Strategy and technology deployment for achieving 100% renewable energy supply for the island of Islay. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16.
Kelly, N.J. and Strachan, P.A. (2001) Multi-domain modelling using the ESP-r system. In: Proceedings of eSIM 2001 Conference on Building Energy Simulation, 2001-06-13 - 2001-06-14.
Abo-Elnor, Mootaz and Boyle, J.T. and Hamilton, R. (2001) Soil-tool interface experimental evaluation and constitutive models. In: 18th Canadian Congress of Applied Mechanics, Newfoundland., 2001-06-03 - 2001-06-07.
Born, F. J. and Clarke, J. A. and Johnstone, C. M. and Smith, N. A. V. (2001) Merit - An evaluation tool for 100% renewable energy provision. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16.
Boyle, J.T. (2001) Accurate approximate estimates of limit and shakedown loads using elastic finite element analysis. In: 18th Canadian Congress of Applied Mechanics (CANCAM 2001, 2001-06-03 - 2001-06-07.
Galbraith, G.H. and Kelly, D. and McLean, R.C. (2001) Techniques for measuring moisture retention properties. In: Proceedings of the 3rd International Conference on Building Envelope Systems and Technologies, ICBEST 2001, 2001-06-26 - 2001-06-29.
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) Modification of welding stresses by flexural vibration during welding. Science and Technology of Welding and Joining, 6 (3). pp. 133-138. ISSN 1362-1718
Selamat, M.S. and Baker, T.N. and Watson, L.M. (2001) Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment. Journal of Materials Processing Technology, 113 (1-3). pp. 509-515. ISSN 0924-0136
Strachan, Paul (2001) Overview of building simulation in Europe. In: Conference on Building Energy Simulation, 2001-06-13 - 2001-06-14.
Tamiaki, M. and Nash, D.H. and Tooth, A.S. (2001) The finite element modelling of horizontal vessels used for storing hot fluids. In: Proceedings of the 4th International Congress on Thermal Stresses, 2001-06-08 - 2001-06-11.
Lappa, M. and Savino, R. and Monti, R. (2001) Three-dimensional numerical simulation of Marangoni instabilities in non-cylindrical liquid bridges in microgravity. International Journal of Heat and Mass Transfer, 44 (10). pp. 1983-2003. ISSN 0017-9310
Lappa, M. and Savino, R. and Monti, R. (2001) Three-dimensional numerical simulation of Marangoni instabilities in liquid bridges : influence of geometrical aspect ratio. International Journal of Numerical Methods in Fluids, 36 (1). pp. 53-90. ISSN 0271-2091
Banks, W.M. and Nash, D.H. and Tooth, A.S. and Flaherty, A.E. (2001) Design optimisation studies on composite pressure vessels and piping to ensure long term structural integrity. In: Structural Integrity of Composite Materials and Structures: Optimisation of Micro-structural Design, 2001-05-20 - 2001-05-25.
Citherlet, S. and Clarke, J.A. and Hand, Jon (2001) Integration in building physics simulation. Energy and Buildings, 33 (5). pp. 451-461. ISSN 0378-7788
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) Modification of residual stress by post-weld vibration. Materials Science and Technology, 17 (5). pp. 601-605. ISSN 0267-0836
Paton, G. and Casey, N.F. and Fairbairn, J. and Banks, W.M. (2001) Advances in the fatigue assessment of wire ropes. Ocean Engineering, 28 (5). pp. 491-518. ISSN 0029-8018
Clarke, J.A. (2001) Domain integration in building simulation. Energy and Buildings, 33 (4). pp. 303-308. ISSN 0378-7788
Clarke, J.A.; (2001) Integrated building performance simulation. In: Proceedings of the 4th International Indoor Air Quality Ventilation and Energy Conservation in Buildings Conference (IAQVEC 2001). City University Hong Kong, CHN, pp. 1395-1404. ISBN 9624421900
Clarke, J.A. and Kelly, N.J. (2001) Integrating power flow modelling with building simulation. Energy and Buildings, 33 (4). pp. 333-340. ISSN 0378-7788
Stack, M.M. (2001) Progress in the development of wear and erosion-corrosion mapping: state-of-the-art in Europe. In: Design Issues on Tribo-corrosion, 2001-04-01.
Boinard, P. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2001) Novel non-destructive technique to assess the degradation of adhesively bonded composite structures. Insight: The Journal of the British Institute of Non-Destructive Testing, 43 (3). pp. 159-162. ISSN 1354-2575
Thomason, J.L. (2001) Structure-processing-performance relationships of thermoplastic composites for automotive applications. In: SAE World Congress 2001, 2001-03-05 - 2001-03-08.
Lee, C.K. and Abdel-Moneim, S.A. (2001) Computational analysis of heat transfer in turbulent flow past a horizontal surface with two-dimensional ribs. International Communications in Heat and Mass Transfer, 28 (2). pp. 161-170. ISSN 0735-1933
Macdonald, Iain and Strachan, Paul A. (2001) Practical application of uncertainty analysis. Energy and Buildings, 33 (3). pp. 219-227. ISSN 0378-7788
Zhang, Y.L. and Gorman, D. and Reese, J.M. (2001) A modal and damping analysis of viscoelastic Timoshenko tubes conveying fluid. International Journal for Numerical Methods in Engineering, 50 (2). pp. 419-433. ISSN 0029-5981
Oliveira, Monica and Ni, X. (2001) On the evaluation of bubble size distribution in an oscillatory baffled column. In: NASCRE 1 Conference, 2001-01-06 - 2001-01-09.
Oliveira, Monica and Ni, X. (2001) Characterisation of the gas phase in an oscillatory baffled reactor. In: Oscillatory Flow Conference, 2001, 2001-01-04 - 2001-01-05.
Thomason, J.L. and Kalinka, G. (2001) A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths. Composites Part A: Applied Science and Manufacturing, 32 (1). pp. 85-90. ISSN 1359-835X
Vogt, U. and Vital, A. and Graule, T. and Graehlert, W. and Leparoux, M. and Hopfe, V. and Ewing, H.C. and Daum, R. and Beil, A. (2001) CVD process for Si-N-O fibre growth controlled by in-situ FTIR spectroscopic monitoring. In: Proceedings of Ceramic Engineering and Science Conference, 2001-01-01.
Baker, T.N.; (2001) Quantitative metallography using transmission electron microscopy. In: 5th International Conference on Quantitive Microscopy of High Temperature Materials 2001. Maney Publishing, pp. 161-189. ISBN 1861251092
Bartak, M. and Cermak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. A. and Majer, M. and Stankov, P.; (2001) Experimental and numerical study of local mean age of air. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 8590193934
Bartak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Stankov, P. (2001) Experimental and numerical investigation of thermal comfort in room with displacement ventilation. In: CLIMA '01 Conference, 2001-12-01.
Bates, J.R. and Blieske, U. and Bloem, J.J. and Campbell, J. and Ferrazza, F. and Hacker, R.J. and Strachan, Paul and Tripanagnostopoulos, Y.; (2001) Building implementation of photovoltaics with active control of temperature. In: Building IMPACT - final result, Proceedings of the 17th Photovoltaic Solar Energy Conference and Exhibition, Munich, October 2001. WIP. ISBN 3-936388-19-1
Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Macdonald, I. A. and Melikov, A. and Stankov, P.; (2001) Further developments in the conflation of CFD and building simulation. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 8590193934
Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. (2001) Assessment of water permeation in adhesively bonded composite structures by dielectric spectroscopy. In: International Conference on Materials Science and Engineering, 2001-04-01.
Born, Francesca J. and Clarke, Joseph and Johnstone, Cameron and Kelly, Nicolas and Burt, Graeme and Dysko, Adam and Macdonald, Iain and Hunter, I.B.B. (2001) On the integration of renewable energy systems within the built environment. Building Services Engineering Research and Technology, 22 (1). pp. 3-13.
Carey, J.J. and Zawadzka, J. and Jaroszynski, D.A. and Wynne, K.; Li, T., ed. (2001) Thz-pulse studies of superluminal propagation in frustrated total internal reflection. In: Ultrafast Phenomena. OSA Trends in Optics and Photonics . Optical Society of America, pp. 238-240.
Chen, Haofeng and Ponter, Alan R.S. (2001) Shakedown and limit analyses for 3-D structures using the linear matching method. International Journal of Pressure Vessels and Piping, 78. pp. 443-451. ISSN 0308-0161
Chen, Haofeng and Ponter, Alan R.S. (2001) A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 20 (4). pp. 555-571. ISSN 0997-7538
Chen, Haofeng and Ponter, Alan R.S. (2001) A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit. European Journal of Mechanics - A/Solids, 20 (4). pp. 539-553. ISSN 0997-7538
Chen, Haofeng and Shu, D.W. (2001) Simplified limit analysis of pipelines with multi-defects. Engineering Structures, 23 (2). pp. 207-213. ISSN 0141-0296
Chen, Haofeng and Shu, D.W. (2001) The load carrying capacity of the pressure vessel with two defects along axial direction. Key Engineering Materials, 177-180. pp. 757-762. ISSN 1013-9826
Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, Paul; (2001) Control in building energy management systems : the role of simulation. In: Proceedings of the 7th international building performance simulation association conference. IBPSA, pp. 99-106.
Clarke, J.A. and Hensen, J.; (2001) Integrated simulation for sustainable building design: an example state-of-the-art system. In: Proceedings of the International Construction Information Technology Conference (CIT 2000). CIB, Reykjavik, Iceland, pp. 465-475. ISBN 9979-9174-3-1
Deans, J. and Dempster, W.M. and Carter, L.J.; (2001) A thermal imaging procedure for landmine detection. In: Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics. Edizioni ETS.
Dempster, W.M.; Rhodes, Norman, ed. (2001) CFD modelling of two-phase mixing/separation flow. In: Computational Fluid Dynamics in Practice. Wiley-Blackwell.
Dempster, W.M. and Arebi, B. (2001) Experimental characteristcs of steam bubble growth at orifices in sub-cooled liquid. International Communications in Heat and Mass Transfer, 28 (4). pp. 467-477. ISSN 0735-1933
Dempster, W.M. and Deans, J. and Stickland, M.T.; (2001) Filling the gap: engineering design analysis within a mechanical engineering curriculum. In: Proceedings of the International Conference on Engineering Design, Computer Based Design. John Wiley & Sons. ISBN 1860583547
Dempster, W.M. and Stickland, M.T. and Vidinha, T. (2001) Liquid velocity field measurements during bubble formation and detachment at an orifice. In: UK/Japan Seminar on Multiphase Flow, 2000-02-29.
Doyle, G.T. and Pethrick, R.A. and Banks, W.M.; (2001) Novel non-destructive technique for the evaluation of adhesively bonded structures. In: Proceedings of the 24th annual meeting of the Adhesion Society: February 25 - 28, 2001, Williamsburg, VA. Adhesion Society, USA, pp. 80-82.
Fernandez, J. and Blanco, E. and Parrondo, J. and Stickland, M.T. and Scanlon, T.J. (2001) Ironwork of Teixois-Taramundi (Asturias) Spain. In: International Symposium on History of Machines and Mechanisms, HMM 2000, 2000-05-11 - 2000-05-13.
Fernandez, J. and Scanlon, T.J. and Stickland, M.T. (2001) Mapping the velocity field in a pump impeller using high speed digital video, image derotation and particle image velocimetry. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14.
Fleming, J.S. and Yan, Y. and Gutierrez-Vega, M. and Yanagisawa, T.; (2001) The economics of compressor modelling. In: Compressors and their systems. IMECHE Conference Transactions . Professional Engineering Publishing, Wiltshire, UK, pp. 359-370. ISBN 186058330X
Galbraith, G.H. and Guo, J. and McLean, R.C. and Munsi, A.S.M.Y. and Sanders, C.H. (2001) The effect of instrument resolution on diffusion coefficients measured using NMR spectroscopy. Materials and Structures, 34 (7). pp. 389-395. ISSN 1359-5997
Galbraith, Graham H. and Li, Jintang and Guo, Jiansong and Kelly, David and McLean, R. Craig and Grunewald, John (2001) Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures. Journal of Thermal Envelope and Building Science, 34 (3). pp. 240-260. ISSN 1097-1963
Gorman, Daniel G. and Reese, J.M. and Horáček, J. and Dedouch, K. (2001) Vibration analysis of a circular disc backed by a cylindrical cavity. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (11). pp. 1303-1311. ISSN 0954-4062
Hand, J.; (2001) The application of simulation in building design and guidance on modelling approaches. In: Proceedings of eSIM 2001 Conference on Building Energy Simulation. CANMET Energy Technology Centre, Ottowa. ISBN 0660616505
Hensen, J. L. M. and Clarke, J.A. (2001) Building systems and indoor environment : simulation for design decision support. In: International Conference on Design and Decision Support Systems in Architecture and Urban Planning, 2001-07-01.
Hensen, J. L. M. and Clarke, J.A.; (2001) Integrated simulation for (sustainable) building design : state-of-the-art illustration. In: Proceedings of the International Conference on Sustainable Building. Aeneas, pp. 22-25. ISBN 9075365365
Hughes, Gareth W. and McInnes, Colin; (2001) Solar sail hybrid trajectory optimization. In: Advances in Astronautical Science. American Astronautical Society.
Johnson, G.R. and Carus, D. and Parrini, G. and Marchese, S.S. and Valeggi, R. (2001) The design of a five-degree-of-freedom powered orthosis for the upper limb. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 215 (3). pp. 275-284. ISSN 0954-4119
Kummert, M. (2001) The SOLTHERM quality charter for suppliers and installers in Wallonia. In: OPET Workshop, International Symposium and Exhibition on Fostering the development of Solar Thermal Energy in Europe, 1900-01-01.
Kummert, M. (2001) Using TRNSYS to obtain a performance comparison of commercial SDHW systems. In: TRNSYS Users Conference, 2001-02-01.
Kummert, M. and Andre, P. and Nicolas, J. (2001) Optimal heating control in a passive solar commercial building. Solar Energy, 69. pp. 103-116. ISSN 0038-092X
Li, Y. and Crowther, D. and Wilson, J.A. and Craven, A.J. and Baker, T.N. (2001) Precipitation in vanadium and vanadium-titanium microalloyed steels. Institute of Physics Conference Series, 168. pp. 183-187. ISSN 0951-3248
Li, Y. and Crowther, D.N. and Green, M.J.W. and Mitchell, P.S. and Baker, T.N. (2001) The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ International, 41 (1). pp. 46-55. ISSN 0915-1559
Liu, H. and Lyon, S.B. and Stack, M.M. (2001) The partial ionic and electronic conductivity of Y-containing and Y-free chromia scales. Oxidation of Metals, 56 (1-2). pp. 147-161. ISSN 0030-770X
Lu, Q. and Stack, M.M. and Wiseman, C.R. (2001) AC impedence spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors. Journal of Applied Electrochemistry, 31 (12). pp. 1373-1379. ISSN 0021-891X
Macdonald, M. and McInnes, C.R.; (2001) Analytic control laws for near-optimal geocentric solar sail transfers. In: Advances in Astronautical Science. American Astronautical Society, pp. 2693-2411. ISBN 0-87703-488-5
Mair, G.M. and Clark, J.E. and Hardiman, R.J. and McKay, S. and Mason, S. (2001) Low bandwidth transatlantic autostereoscopic telepresence. In: To be ascertained, 1900-01-01.
Mathew, M.T. and Chi, K. and Stack, M.M. (2001) Significance of oil analysis in condition monitoring - a review. In: 13th National Conference on Recent Trends in Condition Monitoring of Machines (NaCoMM-2001), 2001-12-21 - 2001-12-22.
McInnes, C.R.; (2001) Near-term mission applications for low performance solar sails. In: Proceedings of AIP Space Technology and Applications International Forum/Staif, Space Exploration and Transportation - Journey into the Future. American Institute of Physics, pp. 379-384. ISBN 1563969815
McInnes, C.R. and Eiden, M. and Groepper, P. and Peacock, T. (2001) Solar sailing - mission opportunities and innovative technology demonstration. ESA European Space Agency Bulletin, 108. pp. 58-65. ISSN 0376-4265
McInnes, Colin and Cartmell, Matthew P. and Radice, Gianmarco (2001) Advances in space systems engineering at the University of Glasgow. Aircraft Engineering and Aerospace Technology, 73 (4). pp. 360-366. ISSN 0002-2667
McIvor, Arthur and Johnston, R. (2001) Dust to dust: Oral testimonies of asbestos-related disease on Clydeside. Oral History, 29 (2). pp. 48-61. ISSN 0143-0955
McKay, S. and Scanlon, T.J. and Stickland, M.T. (2001) The development of a three-dimensional imaging system and its application in fluid mechanics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (12). pp. 1459-1463. ISSN 0954-4062
Morbitzer, C. and Strachan, P.A. and Spires, Brian and Cafferty, David and Webster, Jim; (2001) Integration of building simulation into the design process of an architectural practice. In: Proceedings of the 7th International Building Performance Simulation Association Conference. International Building Performance Simulation Association. ISBN 85-901939-3-4
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) The effect of vibratory stress on the welding microstructure and residual stress distribution. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 215 (2). pp. 99-111. ISSN 1464-4207
Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) The influence of vibratory treatment on the fatigue life of welds : a comparison with thermal stress relief. Strain, 37 (4). pp. 142-150. ISSN 0039-2103
Myles, C.M. and Rowe, P.J. and Walker, C. and Nutton, R.W. (2001) An RCT to investigate the functional outcome following total knee replacement with or without patella resurfacing. In: Scottish Physiotherapists Research Workshop, 2001-04-24.
Nash, D.H. and Spence, J. and Tooth, A.S. and Abid, Muhammad and Power, D.J. (2001) A parametric study of metal-to-metal full face taper-hub flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 791-797. ISSN 0308-0161
Nutton, R.W. and Myles, C.M. and Rowe, P.J. and Walker, C. (2001) The influence of age, gender, height and body mass on lumbar spinal range of motion measured using the isotrak. In: 18th Congress of the International Society of Biomechanics, 2001-07-08 - 2001-07-13. (Unpublished)
Otten, M. and McInnes, C.R. (2001) Near minimum-time trajectories for solar sails. Journal of Guidance, Control and Dynamics, 24 (5). pp. 632-634. ISSN 1533-3884
Radice, Gianmarco and McInnes, Colin; (2001) Autonomous satellite constellations for planetary exploration. In: Proceedings of the 3rd International NAISO Congress on Information Service Innovations (ISI'2001). NAISO. ISBN 3-906454-25-8
Radice, Gianmarco and McInnes, Colin; (2001) Multiple target selection and obstacle avoidance using potential function guidance method. In: Advances in Astronautical Science. American Astronautical Society, pp. 1721-1732. ISBN 0-87703-488-5
Rhodes, J.; Zaras, J. and Kowal-Michalska, K. and Rhodes, J., eds. (2001) Some observations on the post-buckling behaviour of thin plates and thin-walled members. In: Proceedings of the Third International Conference on Thin-Walled Structures: Advances and Developments. Elsevier, London, UK, pp. 69-84. ISBN 0080439551
Rhodes, James and Macdonald, Martin and Kotelko, Maria and McNiff, W.; (2001) Buckling load capacity of stainless steel columns subjected to concentric and eccentric loading. In: Proceedings of the 3rd International Conference on Thin-Walled Structures: Advances and Developments. Elsevier, London, UK, pp. 225-232. ISBN 0080439551
Roger, A. and Welsh, T. and McInnes, C.R.; El-Genk, Mohammed S., ed. (2001) Tuneable autonomy and human interfaces for free-flying servicing vehicles. In: Proceedings of AIP Space Technology and Applications International Forum/Staif, Space Exploration and Transportation - Journey into the Future. American Institute of Physics, pp. 103-108. ISBN 1-56396-980-7
Rowe, P.J. and Myles, C.M. and Walker, C. and Nutton, R.W. (2001) Knee joint kinematics in gait and other functional activities two years after knee replacement: is the patients function normal. In: 18th Congress of the International Society of Biomechanics, 2001-07-08 - 2001-07-13. (Unpublished)
Salamana, M. and McInnes, C.R. and Mulligan, P.; Jenkins, Christopher H.M., ed. (2001) Gossamer sailcraft technology. In: Gossamer Spacecraft: Membrane and Inflatable Structures Technology for Space Applications. American Institute of Aeronautics and Astronautics. ISBN 1-56347-777-7
Scanlon, T.J. and Stickland, M.T. (2001) An experimental and numerical investigation of natural convection melting. International Communications in Heat and Mass Transfer, 28 (2). pp. 181-190. ISSN 0735-1933
Scanlon, T.J. and Stickland, M.T. and Lacombe, M. (2001) A PIV and CFD analysis of natural convection ice melting. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14.
Spathopoulos, M.P. and Fragopoulos, D.; (2001) Control design of a crane for offshore lifting operations. In: Nonlinear control in the year 2000, vol 2. Lecture Notes in Control and Information Sciences, 259 (2). Springer, pp. 469-486. ISBN 1-85233-364-2
Stack, M.M.; Digney, D.A. and Bayer, R.G., eds. (2001) Mapping erosion of MMCs at elevated temperatures: some recent advances. In: Proceedings of the 13th International Conference on Wear of Materials. Elsevier. ISBN 0-08-044007-X
Stack, M.M. (2001) Solid particle erosion of MMCs - a perspective on room and elevated temperature erosion performance. In: Microstructural design against wear and erosion of metals and surface coatings at elevated temperatures, 2001-11-21.
Stack, M.M. and Pena, D. (2001) Mapping the erosion of Ni-Cr/WC-based composites at elevated temperatures: some recent advances. Wear, 251 (1-12). pp. 1433-1451. ISSN 0043-1648
Thomason, J.L.; (2001) Injection mouldable 'long' natural fibre reinforced polypropylene for automotive applications. In: Proceedings of the Society of Automotive Engineers World Congress 2001. SAE International.
Thomason, J.L.; (2001) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? In: Proceedings of the 7th International Conference on Interfacial Phenomena in Composite Materials (IPCM7). Butterworth - Heinemann.
Thomason, J.L. (2001) Micromechanical parameters from macromechanical measurements on glass-reinforced polyamide. Composites Science and Technology, 61 (14). pp. 2007-2016. ISSN 0266-3538
Trendafilova, I.; (2001) Pattern recognition methods for damage diagnosis in structures from vibration measurements. In: Damage Assessment of Structures. Key Engineering Materials, 204-2 . Trans Tech Publications Ltd, pp. 85-96. ISBN 0-87849-879-6
Trendafilova, I. and Heylen, W. and Van Brussel, H.H. (2001) Measurement point selection in damage detection using the mutual information concept. Smart Materials and Structures, 10 (3). pp. 528-533. ISSN 0964-1726
Trendafilova, I. and Van Brussel, H.H. (2001) Nonlinear dynamics tools for the motion analysis and condition monitoring of robot joints. Mechanical Systems and Signal Processing, 15 (6). pp. 1141-1164. ISSN 0888-3270
Vidinha, T. and Dempster, W.M. and Stickland, M.T. (2001) Liquid velocity field measurements during bubble formation and detachment at an orifice. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14.
Vital, A. and Vogt, U. and Graule, T. and Graehlert, W. and Leparoux, M. and Hopfe, V. and Ewing, H.C. and Daum, R. and Beil, A.; (2001) Prototype reactor for scale-up of Si-N-O fibre production. In: 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings. Ceramic Engineering and Science Proceedings, 21 . John Wiley & Sons Inc., pp. 299-306. ISBN 9780470294635
Walker, C.A. (2001) Editorial Article. Strain, 37 (2). p. 1. ISSN 0039-2103
Walker, C.A. and Blair, R. (2001) An experimental review of the McMahon/Cheng model of running. Sports Engineering, 4 (3). pp. 113-122. ISSN 1369-7072
Wang, H.W. and Stack, M.M. and Hovsepian, P. (2001) Macroparticle induced corrosion for arc bond sputtering CrN/Nbn superlattice coatings. Journal of Materials Science Letters, 20 (21). pp. 1995-1997. ISSN 0261-8028
Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2001) Preferential erosive wear of droplet particles for cathodic arc/unbalanced magnetron sputtering CrN.NbN superlattice PVD coatings. Journal of Materials Science Letters, 20 (6). pp. 547-550. ISSN 0261-8028
Zaras, J. and Kowal-Michalska, K. and Rhodes, J. (2001) Thin-Walled Structures - Advances and Developments, Proceedings of the 3rd ICTWS Conference 2001. Elsevier Science. ISBN 0080439551
Zhang, Y.L. and Reese, J.M. (2001) Particle-gas turbulence interactions in a kinetic theory approach to granular flows. International Journal of Multiphase Flow, 27 (11). pp. 1945-1964. ISSN 0301-9322
Zhang, Y.L. and Reese, J.M. and Gorman, D.; (2001) The vibration of prestressed orthotropic cylindrical shells conveying fluid. In: Proceedings of the ASME Pressure Vessels and Piping Symposium on Flow-Induced Vibration. ASME, pp. 191-198. ISBN 0791841898
Zhang, Yonghao and Reese, Jason; (2001) Using a kinetic theory approach incorporating interaction with the air to model granular flow down a chute. In: Handbook of Powder Technology Vol 10. Elsevier Science, Amsterdam, 255-261, Chapter 3.2. ISBN 0-444-50235-1
2000
Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2000) Wear associated with growth defects in combined cathodic arc/unbalanced magnetron sputtered CrN/NbN superlattice coatings during erosion in alkaline slurry. Surface and Coatings Technology, 135 (1). pp. 82-90. ISSN 0257-8972
Zhang, Yonghao and Reese, Jason (2000) The influence of the drag force due to the interstitial gas on granular flows down a chute. International Journal of Multiphase Flow, 26 (12). pp. 2049-2072. ISSN 0301-9322
Monti, R and Savino, R and Lappa, M (2000) Influence of geometrical aspect ratio on the oscillatory Marangoni convection in liquid bridges. Acta Astronautica, 47 (10). pp. 753-761. ISSN 0094-5765
Monti, R. and Savino, R. and Lappa, M. and Carotenuto, L. and Castagnolo, D. and Fortezza, R. (2000) Flight results on Marangoni flow instability in liquid bridges. Acta Astronautica, 47 (2-9). pp. 325-334. ISSN 0094-5765
Lappa, M. and Savino, R. and Monti, R. (2000) Influence of buoyancy forces on Marangoni flow instabilities in liquid bridges. International Journal of Numerical Methods for Heat and Fluid Flow, 10 (7). pp. 721-749. ISSN 0961-5539
Banks, W.M. and Nash, D.H. and Flaherty, A.E. and Fok, W.C. and Tooth, A.S. (2000) A simplified design approach to determine the maximum strains in a grp vessel supported on twin saddles. International Journal of Pressure Vessels and Piping, 77 (13). pp. 837-842. ISSN 0308-0161
Nash, David and Abid, Muhammad (2000) Combined external load tests for standard and compact flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 799-806. ISSN 0308-0161
Wang, H W and Stack, M M (2000) The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles. Journal of Materials Science, 35 (21). pp. 5263-5273. ISSN 0022-2461
Lu, Q and Stack, M M and Wiseman, C R (2000) Corrosion behaviour and characterisation of iron in hot flowing Bayer liquors. Materials and Corrosion-Werkstoffe und Korrosion, 51 (10). pp. 705-711. ISSN 0947-5117
Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-I. (Ti,Nb)(C,N) particles. Acta Materialia, 48 (15). pp. 3857-3868. ISSN 1359-6454
Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-II. Non-titanium based particles. Acta Materialia, 48 (15). pp. 3869-3878. ISSN 1359-6454
Shi, Zhusheng and Reese, Jason and Chandler, Howard (2000) The application of a shock wave model to some industrial bubbly fluid flows. International Journal of Engineering Science, 38. pp. 1617-1638. ISSN 0020-7225
Zhang, Y.L. and Gorman, Daniel and Reese, Jason (2000) A new model for the vibration of an initially-stretched tube conveying pulsatile fluid flow. In: 7th International Conference on Flow-Induced Vibration, 2000-06-19 - 2000-06-22.
Stickland, Matthew T. and Scanlon, Tom J. and Blanco-Marigorta, Eduardo and Fernandez-Francos, Joaquin and Parrondo-Gayo, Jorge L. and Santolaria-Morros, Carlos; (2000) Numerical simulation of centrifugal pumps. In: Proceedings of ASME 2000 Fluids Engineering Division Summer Meeting. ASME, New York. ISBN 0791819665
Zhang, Yonghao and Reese, Jason (2000) On gas-solid interactions in the flow of granular material down a chute. In: 3rd Israeli Conference on Conveying and Handling of Particulate Solids, 2000-05-29 - 2000-06-01.
McKay, S. and Mair, G.M. and Mason, S. and Revie, Kenneth; (2000) Membrane mirror based autostereoscopic display for teleoperation and telepresence. In: Proceedings of SPIE. SPIE, UK, pp. 198-207. ISBN 9780819435750
Wang, H W and Stack, M M and Lyon, S B and Hovsepian, P. and Munz, W D (2000) The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings. Surface and Coatings Technology, 126 (2-3). pp. 279-287. ISSN 0257-8972
Zhang, Y.L. and Gorman, Daniel and Reese, Jason and Horacek, Jaromir (2000) Observations on the vibration of axially-tensioned elastomeric pipes conveying fluids. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (3). pp. 423-434. ISSN 0954-4062
Gorman, Daniel and Reese, Jason and Zhang, Y.L. (2000) Vibration of a flexible pipe conveying viscous pulsating fluid flow. Journal of Sound and Vibration, 230 (2). pp. 379-392. ISSN 0022-460X
Vasile, Massimiliano and Finzi, Amalia E. (2000) Direct lunar descent optimisation by finite elements in time approach. International Journal of Mechanics and Control, 1 (1). ISSN 1590-8844
Abid, Muhammad and Nash, D.H. and Webjorn, Jan; Bache, M.R. and Blackmore, P.A. and Draper, J. and Edwards, J.H. and Roberts, P. and Yates, J.R., eds. (2000) The stamina of non-gasketed, flanged pipe connections. In: Fatigue 2000 - Fatigue and Durability Assessment of Materials, Components and Structures: Proceedings of the Fourth International Conference of the Engineering Integrity Society. EMAS Publishing, pp. 575-584. ISBN 1 901537 16 1
Chen, Haofeng and Shu, D.W. (2000) Lower and upper bound limit analyses for pipeline with multi-slots of various configurations. International Journal of Pressure Vessels and Piping, 77 (1). pp. 17-25. ISSN 0308-0161
Chen, Haofeng and Shu, D.W. (2000) The effects of the distance between two defects on the load carrying capacity of pressure vessel. Journal of Pressure Vessel Technology, 122 (2). pp. 198-203. ISSN 0094-9930
Liu, Y.H. and Cen, Z.Z. and Chen, Haofeng and Xu, B.Y. (2000) Plastic collapse analysis of defective pipelines under multi-loading systems. International Journal of Mechanical Sciences, 42 (8). pp. 1607-1622. ISSN 0020-7403
Nash, D.H. and Flaherty, A.E. and Banks, W.M. and Fok, W.C. and Tooth, A.S. (2000) The design of twin-saddle supported multi-layered glass-reinforced plastic vessels - the development of a parametric equation for the maximum strain. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 214 (3). pp. 113-128. ISSN 1464-4207
Shi, Z. and Reese, Jason (2000) Shock waves in bubbly flows in the oil/gas industry. In: 22nd International Symposium on Shock Waves, 2000-01-01 - 2000-01-02.
Strachan, P and Oldroyd, A and Stickland, M (2000) Introducing instrumentation and data acquisition to mechanical engineering students using LabVIEW. International Journal of Engineering Education, 16 (4). pp. 315-326. ISSN 0949-149X
1999
Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. Wear, 235. pp. 484-496. ISSN 0043-1648
Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. Wear, 233-235. pp. 535-541. ISSN 0043-1648
Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. Wear, 233-235. pp. 542-551. ISSN 0043-1648
Lappa, M. and Savino, R. (1999) Parallel solution of the three-dimensional Marangoni flow instabilities in liquid bridges. International Journal of Numerical Methods in Fluids, 31 (6). pp. 911-935. ISSN 0271-2091
Liu, H. and Mojica-Calderon, C and Lyon, S.B. and Stack, M.M. (1999) In situ solid state electrochemical impedance spectroscopy of NiO scales. Solid State Ionics, 126 (3-4). pp. 363-372. ISSN 0167-2738
Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X
Zhang, Y.L. and Gorman, Daniel and Reese, Jason (1999) Eigenmode analysis of a cylindrical shell conveying a viscous fluid. In: 3rd EUROMECH Conference on Engineering Aero-Hydroelasticity, 1999-09-13 - 1999-09-15.
Zhang, Y.L. and Gorman, Daniel and Reese, Jason (1999) Analysis of the vibration of pipes conveying fluid. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (8). pp. 849-860. ISSN 0954-4062
Clarke, Joseph and Johnstone, Cameron and Kelly, Nicolas and McLean, Robert and Anderson, John and Rowan, Neil and Smith, John (1999) A technique for the prediction of the conditions leading to mould growth in buildings. Building and Environment, 34 (4). pp. 515-521. ISSN 0360-1323
Rhodes, J. and Nash, D.H. and Macdonald, Martin (1999) An examination of web crushing in thin-walled beams. In: The Fourth International Conference on Steel and Aluminium Structures, 1999-06-20 - 1999-06-23.
Stickland, M.T. and Dempster, W. M.; (1999) Comparison of the computed flow field around a bubble growing at an orifice using PIV techniques. In: Proceedings of the Second International Symposium on Two-Phase Flow Modelling and Experimentation. Edizioni ETS, p. 1365. ISBN 88-467-0177-1
Stack, M M and Corlett, N. and Zhou, S (1999) Impact angle effects on the transition boundaries of the aqueous erosion-corrosion map. Wear, 229. pp. 190-198. ISSN 0043-1648
Stack, M.M. and Pena, D. (1999) Particle size effects on the elevated temperature erosion behaviour of Ni-Cr/WC MMC-based coatings. Surface and Coatings Technology, 113 (1-2). pp. 5-12. ISSN 0257-8972
Stack, M.M. and Wang, H.W. and Munz, W.D. (1999) Some thoughts on the construction of erosion-corrosion maps for PVD coated steels in aqueous environments. Surface and Coatings Technology, 113 (1-2). pp. 52-62. ISSN 0257-8972
Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836
Houston, Parul and Dickson, Marion and Ludbrook, Valerie and White, Brian and Schwachtgen, Jean-Luc and McVey, John H. and Mackman, Nigel and Reese, Jason and Gorman, Daniel and Campbell, Callum and Braddock, Martin (1999) Fluid shear stress induction of the tissue factor promoter in vitro and in vivo is mediated by Egr-1. Arteriosclerosis Thrombosis, and Vascular Biology, 19 (2). pp. 281-289. ISSN 1524-4636
Wang, H.W. and Stack, M.M. (1999) The slurry erosive wear of physically vapour deposited TiN and CrN coatings under controlled corrosion. Tribology letters, 6 (1). pp. 23-36. ISSN 1023-8883
Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1999) On the solution of limit load and reference stress of 3-D structures under multi-loading systems. Engineering Structures, 21 (6). pp. 530-537. ISSN 0141-0296
Chen, Haofeng and Shu, D.W. (1999) A numerical method for lower bound limit analysis of 3-D structures with multi-loading systems. International Journal of Pressure Vessels and Piping, 76 (2). pp. 105-112. ISSN 0308-0161
Clarke, Joseph Andrew and Hand, Jon and Janak, Milan; Fontoynont, Marc, ed. (1999) Daylight performance : Daylight quality and control of energy consumption. In: Dayliht Performance of Buildings. Routledge. ISBN 1-873936-87-7
Cui, Dingjun and Craighead, Ian A. (1999) A new approach to assess the quality of small high-speed centrifugal fans using noise measurement. International Journal of Rotating Machinery, 5 (2). pp. 147-153. ISSN 1542-3034
1998
Liu, H. and Stack, Margaret and Lyon, S.B. (1998) Ionic transport numbers in Cr2O3 scales and reactive element effects. Chinese Journal of Materials Research, 12. pp. 52-56. ISSN 1005-3093
Reese, Jason and Thompson, David S. (1998) Shear stress in arterial stenoses : a momentum integral model. Journal of Biomechanics, 31 (11). pp. 1051-1057. ISSN 0021-9290
Stack, Margaret (1998) Control of erosive wear in corrosive environments using erosion-corrosion maps : Potential applications to fossil fuel environments. In: Corrosion '98 Conference, 1998-10-01.
Reese, Jason (1998) Burnett predictions of rarefied gas shock structure : Comparison of theory and experiment. In: 21st International Symposium on Shock Waves, 1997-09-01 - 1997-09-07.
Rhodes, J. and Nash, D.H. (1998) An investigation of web crushing behaviour in thin-walled beams. Thin-Walled Structures, 32 (1-3). pp. 207-230. ISSN 0263-8231
Wang, H.W. and Stack, M.M. (1998) Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buffer slurries containing alumina particles. Surface and Coatings Technology, 106 (1). pp. 1-7. ISSN 0257-8972
Wang, H.W. and Stack, M.M. (1998) Corrosion of PVD TiN coatings under simultaneous erosion in sodium carbonate bicarbonate buffered slurries. Surface and Coatings Technology, 105 (1-2). pp. 141-146. ISSN 0257-8972
Liu, H. and Stack, M.M. and Lyon, S.B. (1998) Reactive element effects on the ionic transport processes in Cr2O3 scales. Solid State Ionics, 109 (3-4). pp. 247-257. ISSN 0167-2738
Corlett, N. and Stack, Margaret and Turgoose, S. and Zhou, S; (1998) Development of a theoretical model to describe the erosion-corrosion wastage process under aqueous slurry conditions : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. Electrochemical Society Proceedings, 98 . The Electrochemical Society, USA. ISBN 1566771994
Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1998) The role of triboparticulates in dry sliding wear. Tribology International, 31 (5). pp. 245-256. ISSN 0301-679X
Liu, H. and Stack, Margaret and Lyon, S.B.; Simpson, C. R. and Mendicion, L. and Rajeshwar, K. and Fenton, J. M., eds. (1998) Ionic partial conductivity in chromia scales : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. The Electrochemical Society, USA. ISBN 1-56677-199-4
Stack, M M and Pungwiwat, N (1998) A note on the construction of materials performance maps for resistance to erosion in aqueous slurries. Wear, 215 (1-2). pp. 67-76. ISSN 0043-1648
Stack, M M and Corlett, N. and Zhou, S (1998) Some thoughts on the effect of elastic rebounds on the boundaries of the aqueous erosion-corrosion map. Wear, 214 (2). pp. 175-185. ISSN 0043-1648
Nash, D.H. and Banks, W.M. and Bernaudon, F. (1998) Finite element modelling of sling-supported pressure vessels. Thin-Walled Structures, 30 (1-4). pp. 95-110. ISSN 0263-8231
Cen, Z.Z. and Chen, Haofeng and Liu, Y.H. and Xu, B.Y. (1998) Collapse load computation of defective pipelines under multi-loading system. Metals and Materials International, 4 (3). pp. 306-310.
Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) Numerical analysis of limit load and reference stress of defective pipelines under multi-loading system. International Journal of Pressure Vessels and Piping, 75 (2). pp. 105-114. ISSN 0308-0161
Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) A numerical method for limit analysis of structures under multi-loading systems. Journal of Tsinghua University and Peking University : Science and Technology., 8. 28-35.
Edrees, H.J. and Smith, A.C. and Hendry, A. (1998) A rule-of-mixtures model for sintering of particle-reinforced ceramic-matrix composites. Journal of the European Ceramic Society, 18 (3). pp. 275-278. ISSN 0955-2219
Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1998) The erosion-corrosion performance of mild steel and SA313-T22 steel in low velocity conditions. In: 3rd NACE Latin American Region Corrosion Conference, 1998-10-01.
1997
Montia, R. and Savinoa, R. and Lappa, M. (1997) Oscillatory thermocapillary flows in simulated floating zones with time-dependent boundary conditions. Acta Astronautica, 41 (12). pp. 863-875. ISSN 0094-5765
Vasile, Massimiliano and Finzi, Amalia E. (1997) Numerical solutions for lunar orbits. In: 48th International Astronautical Congress, 1997-10-06 - 1997-10-10.
Stack, Margaret and Pena, D.; (1997) Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites. In: Microscopy of Oxidation. Institute of Materials, GBR, pp. 757-765. ISBN 9781861250346
Jiang, Jiaren and Stott, F.H. and Stack, Margaret; (1997) The role of triboparticulates in dry sliding wear. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, GBR, p. 135. ISBN 978-1+-86058-109-0
Stack, Margaret and Pena, D.; (1997) Approaches to constructing materials performance maps for exposure to elevated temperature erosion. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, GBR, p. 222. ISBN 978-1-86058-109-0
Wang, H.W. and Stack, Margaret; (1997) Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, GBR, p. 215. ISBN 978-1-86058-109-0
Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) Characterization of wear scar surfaces using combined three-dimensional topographic analysis and contact resistance measurements. Tribology International, 30 (7). pp. 517-526. ISSN 0301-679X
Reese, Jason (1997) Characterisation of the flow in the molten metal sump during direct chill aluminium casting. Metallurgical and Materials Transactions B, 28 (3). pp. 491-499. ISSN 1073-5615
Stack, M.M. (1997) Some issues relating to the construction of materials selection maps for resistance to elevated temperature erosion. Tribology International, 30 (6). pp. 435-444. ISSN 0301-679X
Stickland, Matthew and Dempster, William and Lothian, Lee and Oldroyd, Andrew; Paisley, Dennis L. and Frank, Alan M., eds. (1997) Particle image velocimetry studies of bubble growth and detachment by high speed photography. In: 22nd International Congress on High-Speed Photography and Photonics. Proceedings of SPIE, 2869 (300). SPIE, Bellingham, Washington. ISBN 9780819422668
Stott, F.H. and Jiang, Jiaren and Stack, Margaret; Datta, P.K. and Burnell-Gray, J.S., eds. (1997) Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys. In: Advances in Surface Engineering. Advances in Surface Engineering, 1 . Royal Society of Chemistry, GBR, pp. 143-157. ISBN 0854047475
Nash, D.H. and Banks, W.M. (1997) Numerical analysis of a sling support arrangement for grp composite pressure vessels. Composite Structures, 97. pp. 679-687. ISSN 0263-8223
Chen, Haofeng and Cen, Z.Z. and Xu, B.Y. and Zhan, S.G. (1997) A numerical method for reference stress in the evaluation of structure integrity. International Journal of Pressure Vessels and Piping, 71 (1). pp. 47-53. ISSN 0308-0161
Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. Wear, 203. pp. 474-488. ISSN 0043-1648
Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. Wear, 203-204. pp. 615-625. ISSN 0043-1648
Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. Wear, 203. pp. 489-497. ISSN 0043-1648
Dauplais, M. and Lecoq, A. and Song, J.X. and Cotton, J. and Jamin, N. and Gilquin, B. and Rowan, E.G. and Vita, C. (1997) On the convergent evolution of animal toxins - conservation of a diad of functional residues in potassium channel-blocking toxins with unrelated structures. Journal of Biological Chemistry, 272 (7). pp. 4302-4309. ISSN 1083-351X
Clarke, Joseph Andrew; Lewis, J. Owen and Goulding, John R., eds. (1997) Predicting the impact of daylighting. In: European Directory of Sustainable and Energy Efficient Building. Routledge.
Stack, M M (1997) Optimizing the performance of materials in FBC conditions using erosion-corrosion wastage and materials performance maps. Materials at High Temperatures, 14 (3). pp. 313-324. ISSN 0960-3409
Stack, Margaret and Pena, D.; (1997) Surface engineering of composite and graded coatings for resistance to solid particle erosion at elevated temperatures. In: Advances in Surface Engineering. Royal Society of Chemistry, GBR, pp. 236-252. ISBN 0854047573
Stickland, MT and Scanlon, TJ and Oldroyd, A and Waddell, P and Crawley, F and Stubbs, B; Mochizuki, Sadanari, ed. (1997) An experimental and computational analysis of buoyancy driven flows by laser sheet tomography, particle image velocimetry and computational fluid dynamics. In: Flow visualization and image processing 1997. Pacific Center of Thermal-Fluids Engineering, Honolulu. ISBN 0965246922
1996
Stack, Margaret and Chacón-Nava, José G. and Rehberg, M.; (1996) Elevated temperature erosion resistance of Ni-based functionally graded materials. In: Proceedings of the 2nd International Conference on Heat Resistant Materials. ASM International, USA, pp. 445-452. ISBN 978-0871705396
Zhou, S. and Stack, M.M. and Newman, R.C. (1996) Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion - Houston Tx, 52 (12). pp. 934-946. ISSN 0010-9312
Stack, Margaret and Pena, D. (1996) Construction of erosion maps for erosion of MMCs and FGMs at elevated temperatures. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29.
Stack, Margaret and Zhou, S and Newman, R.C. (1996) An approach to defining erosion-corrosion regimes for erosion in aqueous slurries. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29.
Heath, G. and Kammer, P. and Stack, Margaret; (1996) The high temperature erosion-corrosion behaviour of industrial thermal sprayed coatings. In: Proceedings of the 9th Thermal Spray Technology Conference and Exposition, NTSC'96. Springer, USA.
Clarke, J. A. and Hand, J. W. and Johnstone, C. M. and Kelly, N. and Strachan, P. A. (1996) Photovoltaic-integrated building facades. Renewable Energy, 8 (1-4). pp. 475-479. ISSN 0960-1481
Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836
Zhou, S and Stack, M M and Newman, R C (1996) Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions. Corrosion Science, 38 (7). pp. 1071-1084. ISSN 0010-938X
Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836
Stack, Margaret (1996) Book Review : Fretting and Fatigue. [Review]
Stack, Margaret and Chacón-Nava, José G. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836
Chen, Haofeng and Song, J. (1996) The influence of strain-rate on the residual stress fields of thick-walled cylinder. Engineering Mechanics, 13. pp. 125-131. ISSN 1802-1484
1995
Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093
Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836
Abed, A. and Smith, A.C. and Hendry, A. (1995) Interfacial behaviour in ceramic-metal composites. Silicates Industriels, 60 (11-12). pp. 313-319. ISSN 0037-5225
Stack, M.M. and Lekatos, S. and Stott, F.H. (1995) Erosion-corrosion regimes : number, nomenclature and justification? Tribology International, 28 (7). pp. 445-451. ISSN 0301-679X
Stack, Margaret and Corlett, N. and Zhou, S (1995) Optimization of aqueous erosion-corrosion parameters using erosion-corrosion maps for erosion-corrosion in aqueous slurries. In: International Conference on Tribology 1995, 1995-10-29 - 1995-11-02.
Reese, Jason and Thiele, F. and Woods, L.C. (1995) On appropriate boundary conditions for rarefied gas shock wave calculations. In: 19th International Symposium on Rarefied Gas Dynamics, 1994-07-25 - 1994-07-29.
Stack, Margaret and Pena, D. and Chacón-Nava, José G.; Hui, D., ed. (1995) Identification of transitions in erosion regimes for the erosion of metal matrix composites at elevated temperatures. In: Proceedings of the 2nd International Conference on Composites Engineering. University of New Orleans Press, USA, pp. 707-708.
Stack, M.M. and Zhou, S. and Newman, R.C. (1995) Identification of transitions in erosion-corrosion regimes in aqueous environments. Wear, 186-187 (2). pp. 523-532. ISSN 0043-1648
Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. Wear, 186-187 (1). pp. 273-283. ISSN 0043-1648
Stott, F.H. and JORDAN, M P and LEKATOS, S and Stack, Margaret and Wood, G.C. (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. Wear, 186 (1). pp. 291-298. ISSN 0043-1648
Stack, Margaret (1995) Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions. In: Workshop on Corrosion in Alumina Plants, 1995-06-06 - 1995-06-08.
Stott, F.H. and LEKATOS, S and JORDAN, M P and Wood, G.C. and Stack, Margaret (1995) The interactions of sulphidation and particle erosion at high temperatures. Materials and Corrosion-Werkstoffe und Korrosion, 46 (5). pp. 261-270. ISSN 0947-5117
Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M. (1995) A second order description of shock structure. Journal of Computational Physics, 117 (2). pp. 240-250. ISSN 0021-9991
Stack, Margaret and Song-Roehrle, Q. and Stott, F.H. and Wood, G.C. (1995) Computer simulation of erosion-corrosion interactions at elevated temperatures. Wear, 181-183 (2). pp. 516-523. ISSN 0043-1648
Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1995) A mathematical model for sliding wear of metals at elevated temperatures. Wear, 181-183 (1). pp. 20-31. ISSN 0043-1648
Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. Wear, 180 (1-2). pp. 91-99. ISSN 0043-1648
Heath, G. and Stack, Margaret and Rehberg, M. and Kammer, P.; (1995) The erosion of functionally graded coatings under fluidized bed conditions. In: Proceedings of the 3rd International Symposium on Structural and Functional Gradient Materials. Presses Polytechniques et Universitaires Romandes, CHE, pp. 511-518. ISBN 288742900
Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M.; (1995) Second order analysis of the inner shock structure. In: Asymptotic Modelling in Fluid Mechanics. Springer, Heidelberg, pp. 191-204. ISBN 3-540-59414-0
1994
Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. Wear, 176 (2). pp. 185-194. ISSN 0043-1648
Smith, A. and Abed, A. and Edrees, H.J. and Hendry, A.; Hoffmann, M.J. and Becher, P.F. and Petzow, G., eds. (1994) Ceramic-matrix composites of silicon-nitride with conducting particles. In: Silicon Nitride 93: proceedings of the international conference on silicon nitride-based ceramics, Stuttgart, October 4-6, 1993. Key Engineering Materials, 89-91 . Trans Tech Publications, Aedermannsdorf, Switzerland, pp. 423-428. ISBN 0-87849-668-8
1993
Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) The significance of velocity exponents in identifying erosion-corrosion mechanisms. Journal de Physique 4, 3 (C9). pp. 687-694. ISSN 1155-4339
Stack, Margaret; (1993) The use of erosion-corrosion maps to characterize erosion-corrosion by slurries. In: Proceedings of the 1st International Symposium on Process Industry Piping. UNSPECIFIED, USA, pp. 1-13.
Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M. (1993) The inner shock structure determined from a modified frame-independent second-order kinetic theory. In: 19th International Symposium on Shock Waves, 1993-07-26 - 1993-07-30.
Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. Wear, 162-164 (B). pp. 706-712. ISSN 0043-1648
Chacón-Nava, José G. and Stott, F.H. and Stack, Margaret (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X
Stack, Margaret and Stott, F.H. (1993) An approach to modelling erosion-corrosion of alloys using erosion-corrosion maps. Corrosion Science, 35 (5-8). pp. 1027-1034. ISSN 0010-938X
Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Characterization of erosion-corrosion regimes using erosion-corrosion maps. Surface Engineering, 11. pp. 31-42. ISSN 0267-0844
1992
Stack, Margaret and Stott, F.H.; (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 182nd Fall Meeting of the Electrochemical Society. The Electrochemical Society, CAN. ISBN 978-1566770163
Stack, M.M. and Stott, F.H. and Wood, G.C. (1992) The effect of pre-oxidation of chromia and alumina forming alloys on erosion in laboratory simulated fluidized-bed conditions. Corrosion Science, 33 (6). pp. 965-983. ISSN 0010-938X
Stack, Margaret and Stott, F.H.; (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 7th Symposium on Oxide Films on Metals and Alloys. UNSPECIFIED, pp. 589-600. ISBN 978-9995538774
Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the effect of pre-oxidation in erosion-corrosion environments. Journal of Physics D: Applied Physics, 25 (1A). A170-A176. ISSN 1361-6463
Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the synergisic effects of erosion and corrosion. Key Engineering Materials, 72-74. pp. 31-47. ISSN 1013-9826
1991
Stack, Margaret and Stott, F.H. and Wood, G.C.; (1991) Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments. In: Heat Resistant Materials. ASM International, Ohio, USA, pp. 333-342. ISBN 978-0871704290
Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion-corrosion mechanisms in fluidized bed environments : materials for combined cycle power plant. In: UNSPECIFIED.
Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836
Stott, F.H. and Tiong, K.K. and Stack, Margaret (1991) The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions. In: The European Corrosion Congress, EUROCORR 91, 1991-10-21 - 1991-10-25.
Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409
Nicholls, J.R. and Stephenson, D. and Polden, M. and Norton, J.F. and Gandry, M. and Stott, F.H. and Prescott, R. and Stack, Margaret and Wouters, G. and Englen, W. and Debruyen, W. and Casteels, F. (1991) Modelling of erosion-corrosion processes in energy conversion systems : summary report. Commission of European Communities, Brussels, Belgium.
Stott, F.H. and Stack, Margaret and Wood, G.C.; (1991) The role of oxides in the erosion-corrosion of alloys in low velocity conditions. In: Corrosion-Erosion-Wear of Materials at Elevated Temperatures. National Association of Corrosion Engineers, NACE, Houston, Texas, Article 12, 1-16.
1988
Clarke, Joseph Andrew; Atkin, Brian, ed. (1988) The role of energy simulation in the design and management of intelligent buildings. In: Intelligent Buildings. Unicom Applied Information Technology . Routledge. ISBN 1850916837
1986
Tooth, Alwyn and Nash, David (1986) The use of a microcomputer in the design of cylindrical pressure-vessels. International Journal of Pressure Vessels and Piping, 24 (1). pp. 1-12. ISSN 0308-0161
1985
Clarke, Joseph Andrew (1985) Energy Simulation in Building Design. Routledge Taylor & Francis Group, Bristol. ISBN 9780852747971
1976
Cockroft, Jeremy and Robertson, Peter (1976) Ventilation of an enclosure through a single opening. Building and Environment, 11 (1). pp. 29-35. ISSN 0360-1323