Browse by Journal or other publication

2024

Ranju, M.R. and Abhilash, P.M. and Kesavan, D. (2024) Rolling contact fatigue studies on AISI 4140 steel under formulated lubrication conditions with nano graphene additives. Wear, 544-545. 205311. ISSN 0043-1648

2023

Azami, Aref and Khoshanjam, Ali and Jerez-Mesa, Ramon and Lluma-Fuentes, Jordi and Travieso-Rodriguez, Jose Antonio (2023) A new theoretical model for surface roughness prediction in rotational abrasive finishing process. Wear, 524-525. 204772. ISSN 0043-1648

2022

Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of tempering and annealing on the microstructure and sliding wear response of G350 grey cast iron. Wear, 496-497. 204283. ISSN 0043-1648

Chailad, Wichain and Yang, Liu and Coveney, Vince and Bowen, Chris and Bickley, Alan (2022) Development of slurry-jet erosion test for elastomeric materials. Wear, 488-489. 204125. ISSN 0043-1648

Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of cementite spheroidizing duration on the microstructure and sliding wear response of grey cast iron against AISI 4330. Wear, 488-489. 204155. ISSN 0043-1648

2021

Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2021) A study on the erosion-corrosion behaviour of engineering materials used in the geothermal industry. Wear, 477. 203821. ISSN 0043-1648

Giourntas, L. and Brownlie, F. and Hodgkiess, T. and Galloway, A.M. (2021) Influence of metallic matrix on erosion-corrosion behaviour of high chromium cast irons under slurry impingement conditions. Wear, 477. 203834. ISSN 0043-1648

2020

Smith, F. and Brownlie, F. and Hodgkiess, T. and Toumpis, A. and Pearson, A. and Galloway, A.M. (2020) Effect of salinity on the corrosive wear behaviour of engineering steels in aqueous solutions. Wear, 462-463. 203515. ISSN 0043-1648

2019

Macdonald, Hamish and Nash, David and Stack, Margaret M. (2019) Repeated impact of simulated hail ice on glass fibre composite materials. Wear, 432-433. 102926. ISSN 0043-1648

2018

Brownlie, F. and Anene, C. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2018) Comparison of hot wire TIG stellite 6 weld cladding and lost wax cast stellite 6 under corrosive wear conditions. Wear, 404-405. pp. 71-81. ISSN 0043-1648

2017

Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A. M. (2017) Effect of nitriding on the corrosive wear performance of a single and double layer Stellite 6 weld cladding. Wear, 376-377 (B). pp. 1279-1285. ISSN 0043-1648

2016

Mir, Amir Sarwar and Luo, Xichun and Sun, Jining (2016) The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon. Wear. ISSN 0043-1648

2015

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Enhanced approach of assessing the corrosive wear of engineering materials under impingement. Wear, 338-339. pp. 155-163. ISSN 0043-1648

Giourntas, L. and Hodgkiess, T. and Galloway, A.M. (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. Wear, 332-333. pp. 1051-1058. ISSN 0043-1648

Rasool, G. and Mridha, S. and Stack, M.M. (2015) Mapping wear mechanisms for TiC/Ti composite coatings. Wear, 328-329. 498–508. ISSN 0043-1648

2014

Andrews, Nicola and Giourntas, L. and Galloway, A. M. and Pearson, A. (2014) Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316. Wear, 320 (1-2). pp. 143-151. ISSN 0043-1648

Sadiq, K. and Black, R.A. and Stack, M.M. (2014) Bio-tribocorrosion mechanisms in orthopaedic devices : mapping the micro-abrasion-corrosion behaviour of a simulated CoCrMo hip replacement in calf serum solution. Wear, 316 (1-2). 58–69. ISSN 0043-1648

2013

Rashid, W.B. and Goel, S. and Luo, X. and Ritchie, J.M. (2013) The development of a surface defect machining method for hard turning processes. Wear, 302 (1-2). pp. 1124-1135. ISSN 0043-1648

Sharifi, Shayan and Stack, Margaret and Stephen, L and Li, Wang-Long and Wang, Moo-Chin (2013) Micro-abrasion of Y-TZP in tea. Wear, 297 (1-2). pp. 713-721. ISSN 0043-1648

2012

Goel, Saurav and Luo, Xichun and Reuben, Robert L and Pen, Hongmin (2012) Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon. Wear, 284-285 (25 Apr). pp. 65-72. ISSN 0043-1648

Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. Wear, 274-275. pp. 401-413. ISSN 0043-1648

2011

Stack, M.M. and Abdelrahman, S.M. (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. Wear, 273 (1). pp. 38-42. ISSN 0043-1648

Chang, Wenlong and Sun, J. and Luo, X. and Ritchie, J.M. and Mack, C. (2011) Investigation of microstructured milling tool for deferring tool wear. Wear, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Jana, B.D. and Stack, M.M. (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. Wear, 270 (7-8). pp. 439-445. ISSN 0043-1648

2010

Hodge, C. and Stack, M.M. (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. Wear, 270 (1-2). pp. 104-114. ISSN 0043-1648

Stack, M.M. and Rodling, J. and Mathew, M.T. and Jawan, H. and Huang, W. and Park, G. and Hodge, C. (2010) Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution : an approach to construction of mechanism and synergism maps for application to bio-implants. Wear, 269 (5-6). pp. 376-382. ISSN 0043-1648

Stack, M.M. and Abdelrahman, S.M. and Jana, B.D. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. Wear, 268 (3-4). pp. 533-542. ISSN 0043-1648

2008

Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. Wear, 264 (9-10). pp. 826-837. ISSN 0043-1648

2006

Stack, M.M. and Abd El-Badia, T.M. (2006) On the construction of erosion-corrosion maps for a WC/Co-Cr based coating in aqueous conditions. Wear, 261 (11-12). pp. 1181-1190. ISSN 0043-1648

Jiang, Jiaren and Stack, Margaret (2006) Modelling sliding wear: from dry to wet environments. Wear, 261 (9). pp. 954-965. ISSN 0043-1648

2005

Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. Wear, 259 (1-6). pp. 243-255. ISSN 0043-1648

Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. Wear, 259 (1-6). pp. 256-262. ISSN 0043-1648

2004

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (2004) A generic model for dry sliding wear of metals at elevated temperatures. Wear, 256 (9/10). pp. 973-985. ISSN 0043-1648

Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. Wear, 256 (5). pp. 565-576. ISSN 0043-1648

Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. Wear, 256 (9-10). pp. 986-1004. ISSN 0043-1648

Wallace, M.S. and Dempster, W.M. and Scanlon, T.J. and Peters, J. and McCulloch, S. (2004) Prediction of impact erosion in valve geometries. Wear, 256 (9-10). pp. 927-936. ISSN 0043-1648

Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system : some comments on particle size effects. Wear, 256 (5). pp. 557-564. ISSN 0043-1648

Stack, M.M. (2004) Editorial Article. Wear, 256 (9-10). pp. 855-856. ISSN 0043-1648

2003

Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. Wear, 255 (1-6). pp. 14-22. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. Wear, 255 (1-6). pp. 225-236. ISSN 0043-1648

Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. Wear, 255 (1-6). pp. 456-465. ISSN 0043-1648

2001

Stack, M.M. and Pena, D. (2001) Mapping the erosion of Ni-Cr/WC-based composites at elevated temperatures: some recent advances. Wear, 251 (1-12). pp. 1433-1451. ISSN 0043-1648

1999

Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. Wear, 235. pp. 484-496. ISSN 0043-1648

Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. Wear, 233-235. pp. 542-551. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. Wear, 233-235. pp. 535-541. ISSN 0043-1648

Stack, M M and Corlett, N. and Zhou, S (1999) Impact angle effects on the transition boundaries of the aqueous erosion-corrosion map. Wear, 229. pp. 190-198. ISSN 0043-1648

1998

Stack, M M and Pungwiwat, N (1998) A note on the construction of materials performance maps for resistance to erosion in aqueous slurries. Wear, 215 (1-2). pp. 67-76. ISSN 0043-1648

Stack, M M and Corlett, N. and Zhou, S (1998) Some thoughts on the effect of elastic rebounds on the boundaries of the aqueous erosion-corrosion map. Wear, 214 (2). pp. 175-185. ISSN 0043-1648

1997

Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. Wear, 203. pp. 474-488. ISSN 0043-1648

Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. Wear, 203. pp. 489-497. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. Wear, 203-204. pp. 615-625. ISSN 0043-1648

1995

Stack, M.M. and Zhou, S. and Newman, R.C. (1995) Identification of transitions in erosion-corrosion regimes in aqueous environments. Wear, 186-187 (2). pp. 523-532. ISSN 0043-1648

Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. Wear, 186-187 (1). pp. 273-283. ISSN 0043-1648

Stott, F.H. and JORDAN, M P and LEKATOS, S and Stack, Margaret and Wood, G.C. (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. Wear, 186 (1). pp. 291-298. ISSN 0043-1648

Stack, Margaret and Song-Roehrle, Q. and Stott, F.H. and Wood, G.C. (1995) Computer simulation of erosion-corrosion interactions at elevated temperatures. Wear, 181-183 (2). pp. 516-523. ISSN 0043-1648

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1995) A mathematical model for sliding wear of metals at elevated temperatures. Wear, 181-183 (1). pp. 20-31. ISSN 0043-1648

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. Wear, 180 (1-2). pp. 91-99. ISSN 0043-1648

1994

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. Wear, 176 (2). pp. 185-194. ISSN 0043-1648

1993

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. Wear, 162-164 (B). pp. 706-712. ISSN 0043-1648