Picture map of Europe with pins indicating European capital cities

Open Access research with a European policy impact...

The Strathprints institutional repository is a digital archive of University of Strathclyde's Open Access research outputs. Strathprints provides access to thousands of Open Access research papers by Strathclyde researchers, including by researchers from the European Policies Research Centre (EPRC).

EPRC is a leading institute in Europe for comparative research on public policy, with a particular focus on regional development policies. Spanning 30 European countries, EPRC research programmes have a strong emphasis on applied research and knowledge exchange, including the provision of policy advice to EU institutions and national and sub-national government authorities throughout Europe.

Explore research outputs by the European Policies Research Centre...

Browse by Author or Creator

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item type | No Grouping
Number of items: 189.

Article

Rafee Ahamed, Rafee Abdulmajeed and Johnstone, Cameron M. and Stack, Margaret M. (2016) Impact angle effects on erosion maps of GFRP : applications to tidal turbines. Journal of Bio- and Tribo-Corrosion, 2 (2). ISSN 2198-4220

Rasool, Ghulam and Sharifi, Shayan and Johnstone, Cameron and Stack, Margaret M. (2016) Mapping synergy of erosion mechanisms of tidal turbine composite materials in sea water conditions. Journal of Bio- and Tribo-Corrosion, 2 (2). ISSN 2198-4220

MacDonald, Hamish and Infield, David and Nash, David H. and Stack, Margaret M. (2016) Mapping hail meteorological observations for prediction of erosion in wind turbines. Wind Energy, 19 (4). pp. 777-784. ISSN 1095-4244

Stack, Margaret M and Geringer, Jean and Mathew, Mathew T (2015) Editorial - Proceedings of 4th International Conference on Tribo-Corrosion, Glasgow 2014 : Volume 1. Tribology International, 91. p. 197. ISSN 0301-679X

Rasool, G. and Stack, M.M. (2015) Tribo-oxidation maps for Ti against steel. Tribology International, 91. pp. 258-266. ISSN 0301-679X

Wang, Sheng-Hui and Jiang, Jiaren and Stack, Margaret M. (2015) Methodology development for investigation of slurry abrasion corrosion by integrating an electrochemical cell to a miller tester. Journal of Bio- and Tribo-Corrosion, 1 (2). pp. 1-9. ISSN 2198-4220

Hayes, A. and Sharifi, S. and Stack, M.M. (2015) Micro-abrasion-corrosion maps of 316L stainless steel in artificial saliva. Journal of Bio- and Tribo-Corrosion, 1 (2). ISSN 2198-4220

Rasool, G. and Mridha, S. and Stack, M.M. (2015) Mapping wear mechanisms for TiC/Ti composite coatings. Wear, 328-329. 498–508. ISSN 0043-1648

Sadiq, Kamran and Stack, Margaret and Black, Richard Anthony (2015) Wear mapping of CoCrMo alloy in simulated bio-tribocorrosion conditions of a hip prosthesis bearing in calf serum solution. Materials Science and Engineering: C, 49. pp. 452-462. ISSN 0928-4931

Rasool, Ghulam and Stack, Margaret (2014) Mapping the role of Cr content in dry sliding of steels : comparison between maps for material and counterface. Tribology International, 80. 49–57. ISSN 0301-679X

Sadiq, Kamran and Black, Richard Anthony and Stack, Margaret (2014) Bio-tribocorrosion mechanisms in orthopaedic devices : mapping the micro-abrasion-corrosion behaviour of a simulated CoCrMo hip replacement in calf serum solution. Wear, 316 (1-2). 58–69. ISSN 0043-1648

Holmes, Duncan and Sharifi, Shayan and Stack, Margaret (2014) Tribo-corrosion of steel in artificial saliva. Tribology International, 75. pp. 80-86. ISSN 0301-679X

Rasool, Ghulam and Stack, Margaret (2014) Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribology International, 74. pp. 93-102. ISSN 0301-679X

Kuo, Chih-Wei and Lee, Kuen-Chan and Yen, Feng-Lin and Shen, Yun-Hwei and Lee, Huey-Er and Wen, Shaw-Bing and Wang, Moo-Chin and Stack, Margaret Mary (2014) Growth kinetics of tetragonal and monoclinic ZrO2 crystallites in 3 mol% yttria partially stabilized ZrO2 (3Y-PSZ) precursor powder. Journal of Alloys and Compounds, 592. pp. 288-295. ISSN 0925-8388

Kuo, Chih-Wei and Shen, Yun-Hwei and Yen, Feng-Lin and Cheng, Huy-Zu and Hung, I-Ming and Wen, Shaw-Bing and Wang, Moo-Chin and Stack, Margaret (2014) Phase transformation behavior of 3 mol% yttria partially-stabilized ZrO2 (3Y–PSZ) precursor powder by an isothermal method. Ceramics International, 40 (2). pp. 3243-3251. ISSN 0272-8842

Hussainova, I. and Stack, Margaret (2013) 3rd International Conference on Tribocorrosion – Atlanta 2012. Tribology International, 68. iv. ISSN 0301-679X

Mathew, Mathew T and Stack, Margaret (2013) Special cluster issue on tribocorrosion of dental materials. Journal of Physics D: Applied Physics, 46 (40). ISSN 0022-3727

Sharifi, Shayan and Stack, Margaret (2013) A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions. Journal of Physics D: Applied Physics, 46 (40). ISSN 0022-3727

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) On erosion issues associated with the leading edge of wind turbine blades. Journal of Physics D: Applied Physics, 46 (38). ISSN 0022-3727

Sharifi, Shayan and Stack, Margaret and Stephen, L and Li, Wang-Long and Wang, Moo-Chin (2013) Micro-abrasion of Y-TZP in tea. Wear, 297 (1-2). pp. 713-721. ISSN 0043-1648

Telfer, C.G. and Stack, Margaret and Jana, Buddhadev (2012) Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries. Tribology International, 53. pp. 35-44. ISSN 0301-679X

Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. Wear, 274-275. pp. 401-413. ISSN 0043-1648

Stack, Margaret and Huang, W. and Wang, G. and Hodge, C. (2011) Some views on the construction of bio-tribo-corrosion maps for Ti in Hanks solution : Particle concentration and applied loads effects. Tribology International, 44 (12). pp. 1827-1837. ISSN 0301-679X

Stack, M.M. and Abdelrahman, Shehab (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. Wear, 273 (1). pp. 38-42. ISSN 0043-1648

Stack, Margaret and Mathew, Mathew T and Hodge, C. (2011) Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : Approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism. Electrochimica Acta, 56 (24). pp. 8249-8259. ISSN 0013-4686

Jana, B.D. and Stack, M.M. (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. Wear, 270 (7-8). pp. 439-445. ISSN 0043-1648

Mathew, Mathew T and Ariza, E. and Rocha, L.A. and Vaz, F. and Fernandes, A.C. and Stack, Margaret (2010) Tribo-Corrosion behaviour of TiCxOy thin films in bio fluids. Electrochimica Acta, 56 (2). pp. 929-937. ISSN 0013-4686

Hodge, C. and Stack, M.M. (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. Wear, 270 (1-2). pp. 104-114. ISSN 0043-1648

Stack, M. M. and Hong, Ting-Fu and Wang, Hsin-Chun and Wang, Moo-Chin and Li, Wang-Long (2010) On the construction of wear maps for Y-TZP dental ceramics in aqueous environments : pH, exposure time and impact angle effects. Tribology International, 43 (12). pp. 2258-2267. ISSN 0301-679X

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) Some perspectives on modelling the effect of temperature on the erosion-corrosion of Fe in aqueous conditions. Tribology International, 43 (12). pp. 2279-2297.

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) A CFD model of erosion-corrosion of Fe at elevated temperatures in aqueous environments. Advances in Science and Technology (72). pp. 75-86. ISSN 1662-8969

Chacón-Nava, José G. and Martínez-Villafañe, Alberto and Almeraya-Calderón, F. and Cabral-Miramontes, J.A. and Stack, Margaret (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X

Stack, M.M. and Rodling, J. and Mathew, M.T. and Jawan, H. and Huang, W. and Park, G. and Hodge, C. (2010) Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution : an approach to construction of mechanism and synergism maps for application to bio-implants. Wear, 269 (5-6). pp. 376-382. ISSN 0043-1648

Roy, Mannish and Pauschitz, A. and Stack, Margaret (2010) Guest Editorial: Tribocorrosion 2009: East meets West. Tribology International, 43 (7). pp. 1201-1202. ISSN 0301-679X

Stack, M.M. and Abdulrahmen, G.H. (2010) Mapping erosion-corrosion of carbon steel in oil exploration conditions : some new approaches to characterizing mechanisms and synergies. Tribology International, 43 (7). pp. 1268-1277. ISSN 0301-679X

Stack, M.M. and Abdelrahman, M. and Jana, B. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. Wear, 268 (3-4). pp. 533-542. ISSN 0043-1648

Purandare, Yashodhan and Ehiasarian, A.P. and Stack, Margaret and Hovsepian, P. (2010) CrN/NbN coatings deposited by HIPIMS : A preliminary study of erosion-corrosion performance. Surface and Coatings Technology, 204 (8). pp. 1158-1162. ISSN 0257-8972

Stack, M.M. (2009) Tribology matters. UK Power and Process Engineering (1). p. 33.

Srinivasa Pai, P. and Mathew, M. T. and Stack, M.M. and Rocha, L.A. (2008) Some thoughts on neural network modelling of micro-abrasion-corrosion processes. Tribology International, 41 (7). pp. 672-681.

Roy, M. and Sundararajan, G. and Stack, M.M. (2008) Tribo-Corrosion 2006 - a passage to India to celebrate the 1st International Conference on Tribo-Corrosion. Tribology International, 41 (7). pp. 571-572.

Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. Wear, 264 (9-10). pp. 826-837. ISSN 0043-1648

Mathew, M.T. and Matijevic, B. and Stack, Margaret and Rocha, L.A. and Ariza, E. (2008) Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. Tribology International, 41 (2). pp. 141-149. ISSN 0301-679X

Stack, M.M. and Cann, P.M. (2007) A celebration of 25 years of the Tribology Group: From tribo-physics to tribo-chemistry - Guest Editorial. Journal of Physics D: Applied Physics, 40 (18). i-ii. ISSN 0022-3727

Antonov, Maksim and Stack, Margaret and Hussainova, I. (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian Academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1736-7530

Stack, M.M. and Abd El-Badia, T.M. (2006) Mapping erosion-corrosion of WC/Co-Cr based composite coatings: Particle velocity and applied potential effects. Surface and Coatings Technology, 201 (3-4). pp. 1335-1347. ISSN 0257-8972

Jiang, Jiaren and Stack, Margaret (2006) Modelling sliding wear: from dry to wet environments. Wear, 261 (9). pp. 954-965. ISSN 0043-1648

Stack, M.M. and Abd El-Badia, T.M. (2006) On the construction of erosion-corrosion maps for a WC/Co-Cr based coating in aqueous conditions. Wear, 261 (11-12). pp. 1181-1190. ISSN 0043-1648

Stack, Margaret and Antonov, Maksim and Hussainova, Irina (2006) Some views on the erosion-corrosion response of bulk chromium carbide based cermets. Journal of Physics D: Applied Physics, 39 (15). pp. 3165-3174. ISSN 0022-3727

Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2006) Velocity effects of erosion-corrosion of CrN/Nb superlattice PVD coatings. Surface and Coatings Technology, 201 (1-2). pp. 361-370. ISSN 0257-8972

Stack, Margaret and Jawan, H. and Mathew, M.T. and Mathew, Mathew T (2005) On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments. Tribology International, 38 (9). pp. 848-856. ISSN 0301-679X

Stack, M.M. (2005) Bridging the gap between tribology and corrosion: from wear maps to Pourbaix diagrams - Runner-up for the Guy Bengough Award, IoM3, 2007. International Materials Reviews, 50 (1). pp. 1-17. ISSN 0950-6608

Yuan, Q. and Stack, Margaret and Chi, Kuangnan (2005) Comparison and analysis of two apparatus (IJR) and (RCE) used for erosion-corrosion in aqueous conditions. Journal of Iron and Steel Research International, 12 (4). pp. 54-59. ISSN 1006-706X

Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. Wear, 259 (1-6). pp. 243-255. ISSN 0043-1648

Stack, M.M. and Jana, B. (2005) Modelling particulate erosion-corrosion regime transitions Al/Al2O3 and Cu/Al2O3 MMCs in aqueous conditions. Tribology International, 38 (11-12). pp. 995-1006. ISSN 0301-679X

Stack, M.M. and Mathew, M.T. (2005) Transitions in microabrasion mechanisms for WC - Co (HVOF) coated steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 49-57. ISSN 1350-6501

Stack, M.M. and Williams, J. (2005) Tribology International - Guest Editorial. Tribology International, 38 (9). p. 785. ISSN 0301-679X

Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. Wear, 259 (1-6). pp. 256-262. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (2004) A generic model for dry sliding wear of metals at elevated temperatures. Wear, 256 (9/10). pp. 973-985. ISSN 0043-1648

Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. Wear, 256 (5). pp. 565-576. ISSN 0043-1648

Stack, M.M. (2004) Editorial Article. Wear, 256 (9-10). pp. 855-856. ISSN 0043-1648

Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system : some comments on particle size effects. Wear, 256 (5). pp. 557-564. ISSN 0043-1648

Stack, M.M. and Purandare, Y. and Hovsepian, P. (2004) Impact angle effects on the erosion - corrosion of superlattice CrN/NbN PVD coatings. Surface and Coatings Technology, 188-189. pp. 556-565. ISSN 0257-8972

Stack, M.M. and Mathew, M.T. (2004) Mapping the micro-abrasion resistance of WC/Co based coatings in aqueous conditions. Surface and Coatings Technology, 183 (2-3). pp. 337-346. ISSN 0257-8972

Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. Wear, 256 (9-10). pp. 986-1004. ISSN 0043-1648

Stack, Margaret (2004) Prediction of erosive wear in the power industry-some new horizons. UK Power Magazine, 1. pp. 65-67.

Stack, M.M. and Mathew, M.T. (2004) Some comments on micro-abrasion interactions for pure metals in bio-oils. Journal of Synthetic Lubrication, 21 (2). pp. 105-118. ISSN 0265-6582

Stack, M.M. (2004) There's something in the way you move - horse racing and skiing are two sports where a better understanding of friction could work. Physics World, 11. pp. 24-25. ISSN 0953-8585

Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. Wear, 255 (1-6). pp. 14-22. ISSN 0043-1648

Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. Wear, 255 (1-6). pp. 456-465. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. Wear, 255 (1-6). pp. 225-236. ISSN 0043-1648

Stack, M.M. (2002) Editorial to: Special issue: Tribo-Erosion. Tribology International, 35 (10). pp. 615-616. ISSN 0301-679X

Stack, M.M. and Chi, K. (2002) Effect of preferential dissolution on erosion-corrosion for chromium steel in alkali slurry. Transactions of the Non-Ferrous Metal Society of China, 12 (5). pp. 931-935. ISSN 1003-6326

Stack, M.M. (2002) Mapping tribo-corrosion processes in dry and aqueous conditions: some new directions for the new Millennium. Tribology International, 35 (10). pp. 681-689. ISSN 0301-679X

Jiang, Jiaren and Stack, Margaret and Neville, Anne (2002) Modelling the tribo-corrosion interaction in aqueous sliding conditions. Tribology International, 35 (10). pp. 669-679. ISSN 0301-679X

Stack, M.M. and Pungwiwat, N. (2002) Particulate erosion of Al in aqueous conditions: some perspectives on pH effects on the erosion-corrosion map. Tribology International, 35 (10). pp. 651-660. ISSN 0301-679X

Lu, Q. and Stack, M.M. and Wiseman, C.R. (2001) AC impedence spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors. Journal of Applied Electrochemistry, 31 (12). pp. 1373-1379. ISSN 0021-891X

Wang, H.W. and Stack, M.M. and Hovsepian, P. (2001) Macroparticle induced corrosion for arc bond sputtering CrN/Nbn superlattice coatings. Journal of Materials Science Letters, 20 (21). pp. 1995-1997. ISSN 0261-8028

Stack, M.M. and Pena, D. (2001) Mapping the erosion of Ni-Cr/WC-based composites at elevated temperatures: some recent advances. Wear, 251 (1-12). pp. 1433-1451. ISSN 0043-1648

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2001) Preferential erosive wear of droplet particles for cathodic arc/unbalanced magnetron sputtering CrN.NbN superlattice PVD coatings. Journal of Materials Science Letters, 20 (6). pp. 547-550. ISSN 0261-8028

Liu, H. and Lyon, S.B. and Stack, M.M. (2001) The partial ionic and electronic conductivity of Y-containing and Y-free chromia scales. Oxidation of Metals, 56 (1-2). pp. 147-161. ISSN 0030-770X

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2000) Wear associated with growth defects in combined cathodic arc/unbalanced magnetron sputtered CrN/NbN superlattice coatings during erosion in alkaline slurry. Surface and Coatings Technology, 135 (1). pp. 82-90. ISSN 0257-8972

Wang, H W and Stack, M M (2000) The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles. Journal of Materials Science, 35 (21). pp. 5263-5273. ISSN 0022-2461

Lu, Q and Stack, M M and Wiseman, C R (2000) Corrosion behaviour and characterisation of iron in hot flowing Bayer liquors. Materials and Corrosion-Werkstoffe und Korrosion, 51 (10). pp. 705-711. ISSN 0947-5117

Wang, H W and Stack, M M and Lyon, S B and Hovsepian, P. and Munz, W D (2000) The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings. Surface and Coatings Technology, 126 (2-3). pp. 279-287. ISSN 0257-8972

Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. Wear, 235. pp. 484-496. ISSN 0043-1648

Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. Wear, 233-235. pp. 542-551. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. Wear, 233-235. pp. 535-541. ISSN 0043-1648

Liu, H. and Mojica-Calderon, C and Lyon, S.B. and Stack, M.M. (1999) In situ solid state electrochemical impedance spectroscopy of NiO scales. Solid State Ionics, 126 (3-4). pp. 363-372. ISSN 0167-2738

Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X

Stack, M M and Corlett, N. and Zhou, S (1999) Impact angle effects on the transition boundaries of the aqueous erosion-corrosion map. Wear, 229. pp. 190-198. ISSN 0043-1648

Stack, M.M. and Pena, D. (1999) Particle size effects on the elevated temperature erosion behaviour of Ni-Cr/WC MMC-based coatings. Surface and Coatings Technology, 113 (1-2). pp. 5-12. ISSN 0257-8972

Stack, M.M. and Wang, H.W. and Munz, W.D. (1999) Some thoughts on the construction of erosion-corrosion maps for PVD coated steels in aqueous environments. Surface and Coatings Technology, 113 (1-2). pp. 52-62. ISSN 0257-8972

Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836

Wang, H.W. and Stack, M.M. (1999) The slurry erosive wear of physically vapour deposited TiN and CrN coatings under controlled corrosion. Tribology letters, 6 (1). pp. 23-36. ISSN 1023-8883

Liu, H. and Stack, Margaret and Lyon, S.B. (1998) Ionic transport numbers in Cr2O3 scales and reactive element effects. Chinese Journal of Materials Research, 12. pp. 52-56. ISSN 1005-3093

Wang, H.W. and Stack, M.M. (1998) Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buffer slurries containing alumina particles. Surface and Coatings Technology, 106 (1). pp. 1-7. ISSN 0257-8972

Wang, H.W. and Stack, M.M. (1998) Corrosion of PVD TiN coatings under simultaneous erosion in sodium carbonate bicarbonate buffered slurries. Surface and Coatings Technology, 105 (1-2). pp. 141-146. ISSN 0257-8972

Liu, H. and Stack, M.M. and Lyon, S.B. (1998) Reactive element effects on the ionic transport processes in Cr2O3 scales. Solid State Ionics, 109 (3-4). pp. 247-257. ISSN 0167-2738

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1998) The role of triboparticulates in dry sliding wear. Tribology International, 31 (5). pp. 245-256. ISSN 0301-679X

Stack, M M and Pungwiwat, N (1998) A note on the construction of materials performance maps for resistance to erosion in aqueous slurries. Wear, 215 (1-2). pp. 67-76. ISSN 0043-1648

Stack, M M and Corlett, N. and Zhou, S (1998) Some thoughts on the effect of elastic rebounds on the boundaries of the aqueous erosion-corrosion map. Wear, 214 (2). pp. 175-185. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) Characterization of wear scar surfaces using combined three-dimensional topographic analysis and contact resistance measurements. Tribology International, 30 (7). pp. 517-526. ISSN 0301-679X

Stack, M.M. (1997) Some issues relating to the construction of materials selection maps for resistance to elevated temperature erosion. Tribology International, 30 (6). pp. 435-444. ISSN 0301-679X

Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. Wear, 203. pp. 489-497. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. Wear, 203-204. pp. 615-625. ISSN 0043-1648

Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. Wear, 203. pp. 474-488. ISSN 0043-1648

Stack, M M (1997) Optimizing the performance of materials in FBC conditions using erosion-corrosion wastage and materials performance maps. Materials at High Temperatures, 14 (3). pp. 313-324. ISSN 0960-3409

Zhou, S. and Stack, M.M. and Newman, R.C. (1996) Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion - Houston Tx, 52 (12). pp. 934-946. ISSN 0010-9312

Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836

Zhou, S and Stack, M M and Newman, R C (1996) Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions. Corrosion Science, 38 (7). pp. 1071-1084. ISSN 0010-938X

Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836

Stack, Margaret and Chacón-Nava, José G. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836

Stack, M.M. and Lekatos, S. and Stott, F.H. (1995) Erosion-corrosion regimes : number, nomenclature and justification? Tribology International, 28 (7). pp. 445-451. ISSN 0301-679X

Stack, M.M. and Zhou, S. and Newman, R.C. (1995) Identification of transitions in erosion-corrosion regimes in aqueous environments. Wear, 186-187 (2). pp. 523-532. ISSN 0043-1648

Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. Wear, 186-187 (1). pp. 273-283. ISSN 0043-1648

Stott, F.H. and JORDAN, M P and LEKATOS, S and Stack, Margaret and Wood, G.C. (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. Wear, 186 (1). pp. 291-298. ISSN 0043-1648

Stott, F.H. and LEKATOS, S and JORDAN, M P and Wood, G.C. and Stack, Margaret (1995) The interactions of sulphidation and particle erosion at high temperatures. Materials and Corrosion-Werkstoffe und Korrosion, 46 (5). pp. 261-270. ISSN 0947-5117

Stack, Margaret and Song-Roehrle, Q. and Stott, F.H. and Wood, G.C. (1995) Computer simulation of erosion-corrosion interactions at elevated temperatures. Wear, 181-183 (2). pp. 516-523. ISSN 0043-1648

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1995) A mathematical model for sliding wear of metals at elevated temperatures. Wear, 181-183 (1). pp. 20-31. ISSN 0043-1648

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. Wear, 180 (1-2). pp. 91-99. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. Wear, 176 (2). pp. 185-194. ISSN 0043-1648

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) The significance of velocity exponents in identifying erosion-corrosion mechanisms. Journal de Physique 4, 3 (C9). pp. 687-694. ISSN 1155-4339

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. Wear, 162-164 (B). pp. 706-712. ISSN 0043-1648

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Characterization of erosion-corrosion regimes using erosion-corrosion maps. Surface Engineering, 11. pp. 31-42. ISSN 0267-0844

Stack, Margaret and Stott, F.H. (1993) An approach to modelling erosion-corrosion of alloys using erosion-corrosion maps. Corrosion Science, 35 (5-8). pp. 1027-1034. ISSN 0010-938X

Chacón-Nava, José G. and Stott, F.H. and Stack, Margaret (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) The effect of pre-oxidation of chromia and alumina forming alloys on erosion in laboratory simulated fluidized-bed conditions. Corrosion Science, 33 (6). pp. 965-983. ISSN 0010-938X

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the effect of pre-oxidation in erosion-corrosion environments. Journal of Physics D: Applied Physics, 25 (1A). A170-A176. ISSN 0022-3727

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the synergisic effects of erosion and corrosion. Key Engineering Materials, 72-74. pp. 31-47. ISSN 1013-9826

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409

Book Section

Rasool, Ghulam and Johnstone, Cameron and Stack, Margaret M. (2016) Tribology of tidal turbine blades : impact angle effects on erosion of polymeric coatings in sea water conditions. In: Proceedings of 3rd Asian Wave and Tidal Energy Conference (AWTEC 2016). Asian Wave and Tidal Energy Conference (AWTEC), Singapore, pp. 1016-1033. ISBN 9789811107825

Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick (2013) Future Needs for Tribo-Corrosion Research and Testing. In: Tribo-Corrosion. ASTM International, pp. 1-13.

Stack, Margaret and Crawley, Joshua and Miller, Mark (2013) An approach to mapping the erosion-corrosion of stainless steel : Applications to tidal energy systems. In: Tribo-Corrosion. ASTM International, pp. 1-28.

Chacón-Nava, José G. and Almeraya-Calderón, F. and Orozco-Carmona, V.M. and Martínez-Villafañe, Alberto and Stack, Margaret (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE.

Chacón-Nava, José G. and Almeraya-Calderón, F. and Martínez-Villafañe, Alberto and Stack, Margaret (2012) Low impact velocity wastage in FBCs : experimental results and comparison between abrasion and erosion theories. In: Abrasion resistance of materials. In-Tech Open Publishers, Croatia. ISBN 9799533070369

Stack, Margaret and Jana, Buddhadev and Abdelrahman, Shehab (2011) Models and mechanisms of erosion-corrosion in metals. In: Tribocorrosion of Passive Metals and Coatings. Tribocorrosion of Passive Metals and Coatings . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9781845699666

Stack, M.M. and Abd El-Badia, T.M. (2006) Mapping the effects of slurry concentration, velocity and electrochemical potential on the erosion-corrosion of WC/Co-Cr thermally sprayed coatings. In: Proceedings of the 12th Nordic Symposium on Tribology. DTU, Department of Mechanical Engineering, Lulea University of Technology, Norway. ISBN 87-90416-19-8

Stack, M.M. (2001) Mapping erosion of MMCs at elevated temperatures: some recent advances. In: Proceedings of the 13th International Conference on Wear of Materials. Elsevier. ISBN 0-08-044007-X

Corlett, N. and Stack, Margaret and Turgoose, S. and Zhou, S (1998) Development of a theoretical model to describe the erosion-corrosion wastage process under aqueous slurry conditions : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. Electrochemical Society Proceedings, 98 . The Electrochemical Society, New Jersey. ISBN 1566771994

Liu, H. and Stack, Margaret and Lyon, S.B. (1998) Ionic partial conductivity in chromia scales : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. The Electrochemical Society, New Jersey. ISBN 1-56677-199-4

Stack, Margaret and Pena, D. (1997) Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites. In: Microscopy of Oxidation. Institute of Materials, London, UK, pp. 757-765. ISBN 9781861250346

Stack, Margaret and Pena, D. (1997) Approaches to constructing materials performance maps for exposure to elevated temperature erosion. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, p. 222. ISBN 978-1-86058-109-0

Wang, H.W. and Stack, Margaret (1997) Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, Bath, UK, p. 215. ISBN 978-1-86058-109-0

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The role of triboparticulates in dry sliding wear. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, Bath, UK, p. 135. ISBN 978-1+-86058-109-0

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1997) Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys. In: Advances in Surface Engineering. Advances in Surface Engineering, 1 . Royal Society of Chemistry, Cambridge, UK, pp. 143-157. ISBN 0854047475

Stack, Margaret and Pena, D. (1997) Surface engineering of composite and graded coatings for resistance to solid particle erosion at elevated temperatures. In: Advances in Surface Engineering. Royal Society of Chemistry, Cambridge, UK, pp. 236-252. ISBN 0854047573

Stack, Margaret and Chacón-Nava, José G. and Rehberg, M. (1996) Elevated temperature erosion resistance of Ni-based functionally graded materials. In: Proceedings of the 2nd International Conference on Heat Resistant Materials. ASM International, pp. 445-452. ISBN 978-0871705396

Heath, G. and Kammer, P. and Stack, Margaret (1996) The high temperature erosion-corrosion behaviour of industrial thermal sprayed coatings. In: Proceedings of the 9th Thermal Spray Technology Conference and Exposition, NTSC'96. Springer.

Stack, Margaret and Pena, D. and Chacón-Nava, José G. (1995) Identification of transitions in erosion regimes for the erosion of metal matrix composites at elevated temperatures. In: Proceedings of the 2nd International Conference on Composites Engineering. University of New Orleans Press, New Orleans, pp. 707-708.

Heath, G. and Stack, Margaret and Rehberg, M. and Kammer, P. (1995) The erosion of functionally graded coatings under fluidized bed conditions. In: Proceedings of the 3rd International Symposium on Structural and Functional Gradient Materials. Presses Polytechniques et Universitaires Romandes, pp. 511-518. ISBN 288742900

Stack, Margaret (1993) The use of erosion-corrosion maps to characterize erosion-corrosion by slurries. In: Proceedings of the 1st International Symposium on Process Industry Piping. UNSPECIFIED, pp. 1-13.

Stack, Margaret and Stott, F.H. (1993) Identification of transitions through erosion-corrosion regimes using erosion-corrosion maps. In: Advances in Materials and Processing Technologies. Trans Tech Publications Ltd, Dublin, pp. 2211-2218.

Stack, Margaret and Stott, F.H. (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 182nd Fall Meeting of the Electrochemical Society. The Electrochemical Society. ISBN 978-1566770163

Stack, Margaret and Stott, F.H. (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 7th Symposium on Oxide Films on Metals and Alloys. UNSPECIFIED, pp. 589-600. ISBN 978-9995538774

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments. In: Heat Resistant Materials. ASM International, Ohio, USA, pp. 333-342. ISBN 978-0871704290

Stott, F.H. and Stack, Margaret and Wood, G.C. (1991) The role of oxides in the erosion-corrosion of alloys in low velocity conditions. In: Corrosion-Erosion-Wear of Materials at Elevated Temperatures. National Association of Corrosion Engineers, NACE, Houston, Texas, Article 12, 1-16.

Conference or Workshop Item

Siddons, Craig and Macleod, Calum and Yang, Liu and Stack, Margaret (2015) An experimental approach to analysing rain droplet impingement on wind turbine blade materials. In: EWEA 2015 Annual Event, 2015-11-17 - 2015-11-20, Paris expo Porte de Versailles.

Ahamed, Rafee A.R. and Johnstone, Cameron M. and Stack, Margaret M. (2015) Mapping blade angle effects for the erosion of polymer based composites : an approach to developing smart materials for tidal turbines. In: 11th European Wave and Tidal Energy Conference (EWTEC2015), 2015-09-06 - 2015-09-11, Cité des Congrès de Nantes.

Sharifi, Shayan and Johnstone, Cameron and Stack, Margaret M. (2015) Tribological challenges of scaling up tidal turbine blades. In: 11th European Wave and Tidal Energy Conference (EWTEC2015), 2015-09-06 - 2015-09-11, Cité des Congrès de Nantes.

Sadiq, K. and Black, R. A. and Stack, M. M. (2015) Bio-tribocorrosion – current concepts in micro-abrasion–corrosion mapping of CoCrMo alloy for hip replacement bearings. In: TriboUK 2015, 2015-04-16 - 2015-04-17, Loughborough University.

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) Numerical modelling of hailstone impact on the leading edge of a wind turbine blade. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07.

Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22.

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2012) Modelling rain drop impact on offshore wind turbine blades. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15.

Stack, M.M. (2010) Tribo-corrosion maps for application in bio-tribology : some new approaches. In: UK-China Summer School and Workshop on Tribology and Surface Engineering, 2010-08-24 - 2010-08-25.

Stack, M.M. and Abdelrahman, S.M. (2010) CFD modelling of erosion-corrosion of steel in aqueous environments : particle concentration effects on the regime boundaries. In: 14th Nordic Conference on Tribology, NordTrib 2010, 2010-06-08 - 2010-06-11.

Abdulrahman, G.H. and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25.

Stack, M.M. and Abdulrahman, Ghaith and Jana, B. (2009) A map and a pipe: a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling. In: EuroCorr 2009, 2009-09-06 - 2009-09-10.

Stack, Margaret and Abdelrahman, Shehab (2009) Some reflections on a model to predict the erosion rate of the passive film on pure metals. In: 13th International Conference on Aerospace Science and Aviation Technology, ASAT 2009, 2009-05-26 - 2009-05-28.

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18.

Antonov, Maksim and Stack, M.M. and Hussainova, Irina (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07.

Stack, M.M. and Jawan, H. and Mathew, M.T. (2004) Some thoughts on micro-abrasion mapping of steels in corrosive environments. In: 8th International Conference on Tribology, 2004-03-24 - 2004-03-27.

Roy, Mannish and Stack, Margaret (2003) An electrochemical technique to measure wear of metals in polymers in corrosive environments. In: Tribology - Science and Application Conference, 2003-04-23 - 2003-04-27.

Mathew, M.T. and Stack, M.M. (2002) Micro-abrasion interactions of pure metals in bio-oils. In: Third International Symposium on Fuels and Lubricants, 2002-10-07 - 2002-10-09.

Stack, M.M. and Mathew, M.T. (2002) Micro-abrasion mapping of steels: some thoughts on the construction of micro-abrasion maps. In: International Conference on Materials and Tribology, 2002-09-12 - 2002-09-13.

Stack, M.M. (2001) Progress in the development of wear and erosion-corrosion mapping: state-of-the-art in Europe. In: Design Issues on Tribo-corrosion, 2001-04-01.

Mathew, M.T. and Chi, K. and Stack, M.M. (2001) Significance of oil analysis in condition monitoring - a review. In: 13th National Conference on Recent Trends in Condition Monitoring of Machines (NaCoMM-2001), 2001-12-21 - 2001-12-22.

Stack, M.M. (2001) Solid particle erosion of MMCs - a perspective on room and elevated temperature erosion performance. In: Microstructural design against wear and erosion of metals and surface coatings at elevated temperatures, 2001-11-21.

Stack, Margaret (1998) Control of erosive wear in corrosive environments using erosion-corrosion maps : Potential applications to fossil fuel environments. In: Corrosion '98 Conference, 1998-10-01.

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1998) The erosion-corrosion performance of mild steel and SA313-T22 steel in low velocity conditions. In: 3rd NACE Latin American Region Corrosion Conference, 1998-10-01.

Stack, Margaret and Pena, D. (1996) Construction of erosion maps for erosion of MMCs and FGMs at elevated temperatures. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29.

Stack, Margaret and Zhou, S and Newman, R.C. (1996) An approach to defining erosion-corrosion regimes for erosion in aqueous slurries. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29.

Stack, Margaret and Corlett, N. and Zhou, S (1995) Optimization of aqueous erosion-corrosion parameters using erosion-corrosion maps for erosion-corrosion in aqueous slurries. In: International Conference on Tribology 1995, 1995-10-29 - 1995-11-02.

Stack, Margaret (1995) Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions. In: Workshop on Corrosion in Alumina Plants, 1995-06-06 - 1995-06-08.

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion-corrosion mechanisms in fluidized bed environments : materials for combined cycle power plant. In: UNSPECIFIED.

Stott, F.H. and Tiong, K.K. and Stack, Margaret (1991) The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions. In: The European Corrosion Congress, EUROCORR 91, 1991-10-21 - 1991-10-25.

Report

Nicholls, J.R. and Stephenson, D. and Polden, M. and Norton, J.F. and Gandry, M. and Stott, F.H. and Prescott, R. and Stack, Margaret and Wouters, G. and Englen, W. and Debruyen, W. and Casteels, F. (1991) Modelling of erosion-corrosion processes in energy conversion systems : summary report. [Report]

Review

Stack, Margaret (1996) Book Review : Fretting and Fatigue. [Review]

This list was generated on Sat Sep 23 13:52:11 2017 BST.