Picture map of Europe with pins indicating European capital cities

Open Access research with a European policy impact...

The Strathprints institutional repository is a digital archive of University of Strathclyde's Open Access research outputs. Strathprints provides access to thousands of Open Access research papers by Strathclyde researchers, including by researchers from the European Policies Research Centre (EPRC).

EPRC is a leading institute in Europe for comparative research on public policy, with a particular focus on regional development policies. Spanning 30 European countries, EPRC research programmes have a strong emphasis on applied research and knowledge exchange, including the provision of policy advice to EU institutions and national and sub-national government authorities throughout Europe.

Explore research outputs by the European Policies Research Centre...

Browse by Journal or other publication

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 32.

Hassan, Bilal and Corney, Jonathan (2017) Grain boundary precipitation in Inconel 718 and ATI 718Plus. Materials Science and Technology. ISSN 0267-0836

Md Idriss, A. N. and Maleque, M.A. and Yaacob, I. I. and Nasir, R. M. and Mridha, S. and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. pp. 1-8. ISSN 0267-0836

Jenkins, P. G. (2016) Understanding physical changes and strength loss of E-glass fibres following exposure to elevated temperatures. Materials Science and Technology. ISSN 0267-0836

Mridha, Shahjahan and Idriss, A.N. and Maleque, M.A. and Jaacob, I.L. and Baker, Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Mridha, Shahjahan and Baker, Neville (2015) Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces. Materials Science and Technology, 31 (3). pp. 337-343. ISSN 0267-0836

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2015) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part II - microstructure and hardness. Materials Science and Technology, 31 (3). pp. 355-360. ISSN 0267-0836

Baker, Neville (2015) The role of zirconium in microalloyed steels. Materials Science and Technology, 31 (3). pp. 265-294. ISSN 0267-0836

Patel, P and Mridha, Shahjahan and Baker, neville (2014) Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique. Materials Science and Technology, 30 (12). pp. 1506-1514. ISSN 0267-0836

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2014) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part I - melt features. Materials Science and Technology, 30 (10). pp. 1209-1213. ISSN 0267-0836

Brooks, Jeffery (2012) Friction during precision forging of high temperature aerospace materials. Materials Science and Technology, 28 (5). pp. 528-531. ISSN 0267-0836

Wisbey, A and Singh, H and Lucas, K. and Brooks, Jeffery (2011) Mechanical performance of extruded Ti–46Al–5Nb–1W titanium aluminide. Materials Science and Technology, 27 (6). pp. 1059-1066. ISSN 0267-0836

Li, Y. and Baker, T.N. (2010) Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology, 26 (9). pp. 1029-1040. ISSN 0267-0836

Rahimi, Salaheddin and Engelberg, Dirk and Marrow, James (2010) Characterisation of grain boundary cluster compactness in austenitic stainless steel. Materials Science and Technology, 26 (6). pp. 670-675. ISSN 0267-0836

Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836

Basoalto, Hector and Brooks, Jeffery and Di Martino, I (2009) Multiscale microstructure modelling for nickel based superalloys. Materials Science and Technology, 25 (2). pp. 221-227. ISSN 0267-0836

Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836

Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836

Li, Y. and Wilson, J.A. and Craven, A.J. and Mitchell, P.S. and Crowther, D. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure. Materials Science and Technology, 23 (5). pp. 509-518. ISSN 0267-0836

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, 23 (5). pp. 519-527. ISSN 0267-0836

Osman, M.M. and Engler, O. and Karhausen, K. and Löchte, L. and McLaren, Andrew (2007) Effect of homogenisation conditions on recrystallisation in the Al-Mg-Mn alloy AA5454. Materials Science and Technology, 23 (6). pp. 688-698. ISSN 0267-0836

Trager-Cowan, C. and Sweeney, F. and Winkelmann, A. and Wilkinson, A.J. and Trimby, P.W. and Day, A.P. and Gholinia, A. and Schmidt, N.H. and Parbrook, P.J. and Watson, I.M. (2006) Characterisation of nitride thin films by electron backscatter diffraction and electron channelling contrast imaging. Materials Science and Technology, 22 (11). 1352-1358(7). ISSN 0267-0836

Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836

McPherson, N.A. and Chi, K. and McLean, M.S. and Baker, T.N. (2003) Structure and properties of carbon steel to duplex stainless steel submerged arc welds. Materials Science and Technology, 19 (2). pp. 219-226. ISSN 0267-0836

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) Modification of residual stress by post-weld vibration. Materials Science and Technology, 17 (5). pp. 601-605. ISSN 0267-0836

Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836

Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836

Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836

Stack, Margaret and Chacón-Nava, José G. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836

Race, J. M. and Bhadeshia, H. K. D. H. (1992) Precipitation sequences during carburisation of Cr-Mo steel. Materials Science and Technology, 8 (10). pp. 875-882. ISSN 0267-0836

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836

This list was generated on Fri Sep 22 18:17:46 2017 BST.