Picture of sea vessel plough through rough maritime conditions

Innovations in marine technology, pioneered through Open Access research...

Strathprints makes available scholarly Open Access content by researchers in the Department of Naval Architecture, Ocean & Marine Engineering based within the Faculty of Engineering.

Research here explores the potential of marine renewables, such as offshore wind, current and wave energy devices to promote the delivery of diverse energy sources. Expertise in offshore hydrodynamics in offshore structures also informs innovations within the oil and gas industries. But as a world-leading centre of marine technology, the Department is recognised as the leading authority in all areas related to maritime safety, such as resilience engineering, collision avoidance and risk-based ship design. Techniques to support sustainability vessel life cycle management is a key research focus.

Explore the Open Access research of the Department of Naval Architecture, Ocean & Marine Engineering. Or explore all of Strathclyde's Open Access research...

Modelling of metal-to-metal seals in a pressure relief valve using advanced FE analysis

Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE analysis. In: 12th International Conference on Computational Methods & Experiments in Surface & Contact Mechanicsc including Tribology, 2015-04-21 - 2015-04-23, TRYP València Oceanic Hotel.

[img] PDF (Gorash-etal-SECM15-2015-Modelling-metal-to-metal-seals-using-advanced-FE-analysis-Apr-2015)
Gorash_etal_SECM15_2015_Modelling_metal_to_metal_seals_using_advanced_FE_analysis_Apr_2015.pdf
Accepted Author Manuscript

Download (1MB)

Abstract

This study investigates the behaviour of the contact faces in the metal-to-metal seal of a typical pressure relief valve. The valve geometry is simplified to an axisymmetric problem. A cylindrical nozzle, which has a valve seat on top, contacts with a disk, which is preloaded by a compressed linear spring. All the components are made of the steel AISI type 316N(L) defined using the multilinear kinematic hardening material model based on monotonic and cyclic tests at 20◦C. Analysis considerations include the effects of the Fluid Pressure Penetration (FPP) across the valve seat which exists at two different scales. There is certain limited fluid leakage through the valve seat at operational pressures, which is caused by the fluid penetrating into surface asperities at the microscale. At the macroscale, non-linear FE analysis using the FPP technique available in ANSYS revealed that there is also a limited amount of fluid penetrating into gap. Accurate prediction of the fluid pressure profile over the valve seat is addressed in this study by considering the FPP interaction on both scales. The shape of this pressure profile introduces an additional component of the spring force, which needs to be considered to provide a reliable sealing. The analysis showed that the evolution of the profile, which is caused by the isotropic softening of the material, is significant during the cyclic operation of the valve.