Browse by Author or creator

2014

Gray, Thomas and Camilleri, Duncan and McPherson, Norman (2014) Control of welding distortion in thin plate fabrication : Design support exploiting computational simulation. Welding and Other Joining Technologies . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857090478

2013

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

2012

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.

Mollicone, Pierluigi and Gray, Thomas and Camilleri, Duncan (2012) Experimental investigation and finite element analysis of welding induced residual stresses. Journal of Strain Analysis for Engineering Design, 47 (3). pp. 140-152. ISSN 0309-3247

2011

Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857092908

2010

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866

2009

Williams, J.G. and Anley, R.E. and Nash, D.H. and Gray, T.G.F. (2009) Analysis of externally loaded bolted joints : analytical, computational and experimental study. International Journal of Pressure Vessels and Piping, 86 (7). pp. 420-427. ISSN 0308-0161

2008

Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2008) Procedural influences on non-linear distortions in welded thin-plate fabrication. Thin-Walled Structures, 46 (7-9). pp. 1021-1034. ISSN 0263-8231

Camilleri, D. and Gray, T.G.F. and Nash, D.H.; (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, Cranfield.

2007

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2007) Computational methods and experimental validation of welding distortion models. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 235-249. ISSN 1464-4207

Mollicone, Pierluigi and Camilleri, Duncan and Gray, Thomas (2007) Procedural influences on non-linear distortions in welded thin plate fabrication. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.

Gray, T.G.F. and Wood, J. (2007) Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 433-446. ISSN 0309-3247

2006

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2006) Alternative simulation techniques for distortion of thin plate due to fillet-welded stiffeners. Modelling and Simulation in Materials Science and Engineering, 14 (8). pp. 1307-1327. ISSN 0965-0393

Camilleri, D. and Gray, T.G.F. and Mollicone, P. (2006) Computational methods and experimental validation of welding distortion simulation. In: Modelling of Manufacturing Processes Seminar, 2006-12-01.

Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2006) Numerical and experimental investigation on the effects of tack welds on thin plate structures. In: Simulation Versus Testing, NAFEMS Workshop, 2006-11-08.

Camilleri, D. and Gray, T.G.F. (2006) Optimization of welded lightweight multiple-stiffener plate structures to minimise unwanted shape distortion. Welding and Cutting, 7 (6). pp. 320-327. ISSN 1612-3433

Gray, T.G.F. and Camilleri, D. and Mollicone, P. (2006) Experimental validation of computational methods for welding distortion prediction. In: 22nd Symposium on Experimental Mechanics of Solids, 2006-10-18 - 2006-10-21.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Simple thermo-elastic-plastic models for welding distortion simulations. Journal of Materials Processing Technology, 176 (1-3). pp. 77-86. ISSN 0924-0136

Camilleri, D. and Mollicone, P. and Comlekci, T. and Gray, T.G.F.; Armstrong, Cecil, ed. (2006) Computational methods for the prediction of out-of-plane deformation in thin plate welded structures. In: Computational Mechanics in the UK: Proceedings of a Joint Conference of The Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation. Queen's University Belfast, pp. 7-10.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Thermal distortion of stiffened plate due to fillet welds : computational and experimental investigation. Journal of Thermal Stresses, 29 (2). pp. 111-137. ISSN 0149-5739

Gray, T.G.F. (2006) Integration of case study technical investigations in honours/masters engineering courses. International Journal of Mechanical Engineering Education, 34 (4). pp. 315-329. ISSN 0306-4190

2005

Camilleri, D. and Gray, T.G.F. (2005) Computationally efficient welding distortion simulation techniques. Modelling and Simulation in Materials Science and Engineering, 13 (8). pp. 1365-1382. ISSN 0965-0393

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Design support tool for prediction of welding distortion in multiply-stiffened plate structures experimental and computational investigation. Journal of Ship Production, 21 (4). pp. 219-234. ISSN 8756-1417

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computationally efficient welding simulation for out-of-plane distortion in double-sided fillet welding. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Mollicone, P. and Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Thermo-elastic-plastic finite element models for gas-shielded metal-arc welding fabrication. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Camilleri, D. and Comlekci, T. and Gray, T.G.F.; (2005) Finite element analysis of out-of-plane distortion in plates due to double-sided fillet-welded attachments. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005, Malta. NAFEMS, p. 88. ISBN 1-874376-03-4

Gray, T.G.F. (2005) Lorry loads of problems. Professional Engineering, 18 (2). p. 21. ISSN 0953-6639

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computational prediction of out-of-plane welding distortion and experimental investigation - Awarded Central Electricity Generating Board Prize. Journal of Strain Analysis for Engineering Design, 40 (2). pp. 161-176. ISSN 0309-3247

2004

Walker, Colin and Gray, Thomas and Nicol, Alexander and Chadwick, E.K.J. (2004) Evaluation of test regimes for stab-resistant body armour. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 355-363. ISSN 1464-4207

Craighead, I.A. and Gray, T.G.F. (2004) Investigation of diesel generator shaft and bearing failures. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 218 (3). pp. 153-158. ISSN 1464-4193

Camilleri, D. and Gray, T.G.F. and Comlekci, T.; (2004) Use of thermography to calibrate fusion welding procedures in virtual fabrication applications. In: InfraMation 2004. Infrared Training Centre.

2003

Camilleri, D. and Comlekci, T. and Lee, C.K. and Tan, H.C.P. and Gray, T.G.F. (2003) Investigation of temperature transients during flux-cored CO2 butt welding of CMn steel plates. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.

Comlekci, T. and Camilleri, D. and Gray, T.G.F.; (2003) Finite element representation on experimental surface deformation data from fusion welded plates. In: Computational Mechanics in the UK : proceedings of the 11th ACME-UK 2003 Conference. University of Strathclyde, Glasgow, UK, pp. 33-36.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Gray, T.G.F. (2003) Out-of-plane distortion of CMn steel plates during flux-cored CO2 automatic butt welding. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.

Gray, T.G.F. and Crowther, P. and Prag, N.; Banks, W.M. and Nash, D.H., eds. (2003) Structural mechanics approaches to weld integrity assessment for pressure vessel attachments. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., London, UK, pp. 249-267. ISBN 1860584012

2002

Walker, C.A. and Gray, T.G.F. (2002) An evaluation of the test regimes for stab-resistant body armour. In: Designing Equipment for Body Protection Seminar, 2002-10-01.