Browse by Journal or other publication

2017

Gorash, Yevgen and Comlekci, Tugrul and Hamilton, Robert (2017) CAE-based application for identification and verification of hyperelastic parameters. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (7). pp. 611-626. ISSN 1464-4207

2016

Micallef, Daniel and Camilleri, Duncan and Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi (2016) Local heat generation and material flow in friction stir welding of mild steel assemblies. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (2). pp. 586-602. ISSN 1464-4207

2015

Pethrick, Richard A (2015) Design and ageing of adhesives for structural adhesive bonding - A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (5). pp. 349-379. ISSN 1464-4207

2014

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

Pethrick, Richard and Banks, William and Brodesser, Monika (2014) Ageing of thermoplastic umbilical hose materials used in a marine environment I : Polyethylene. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228. pp. 45-62. ISSN 1464-4207

Pethrick, Richard and Banks, William and Brodesser, Monika (2014) Ageing of thermoplastic umbilical hose materials used in a marine environment II : Nylon. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228. pp. 63-88. ISSN 1464-4207

David-West, Opukuro and Nash, David and Banks, William (2014) Low velocity heavy mass impact response of singly curved composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (1). pp. 17-33. ISSN 1464-4207

2012

Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207

Rhoney, I. and Pethrick, R. A. (2012) Low coefficient of thermal expansion of thermoset composite materials. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (1). pp. 76-87. ISSN 1464-4207

2011

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Mackintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2011) Dynamic characteristics and processing of fillers in polyurethane elastomers for vibration damping applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 113-122. ISSN 1464-4207

David-West, O.S. and Banks, W.M. and Pethrick, R.A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 133-148. ISSN 1464-4207

Walker, C. (2011) A theoretical review of the operation of vibratory stress relief with particular reference to the stabilization of large-scale fabrications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 195-204. ISSN 1464-4207

Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207

2008

Pethrick, R.A. and Hudson, N.E. (2008) Rotational moulding - a simplified theory. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 222 (L3). pp. 151-158. ISSN 1464-4207

2007

Rosochowski, A and Olejnik, L (2007) Finite element simulation of severe plastic deformation processes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 187-196. ISSN 1464-4207

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2007) Computational methods and experimental validation of welding distortion models. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 235-249. ISSN 1464-4207

Flannigan, A. and Offord, S.J.J. and Orr, S.W. and Wheel, Marcus (2007) Mechanical testing of wood-glass composite mast sections. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (2). pp. 45-52. ISSN 1464-4207

MacKenzie, P.M. (2007) Moiré interferometry applied to fracture in titanium tubes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (3). pp. 131-141. ISSN 1464-4207

2006

Walker, Colin and Ujihashi, Sadayuki, eds. (2006) Guest editorial article, special issue on sports engineering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). i-i. ISSN 1464-4207

Bradley, G R and MacKenzie, P M (2006) Development of a novel metastable composite material. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). pp. 181-187. ISSN 1464-4207

McLaren, A.J. (2006) Design and performance of ropes for climbing and sailing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 1-12. ISSN 1464-4207

Walker, C.A. (2006) The effect of cyclic loading on the stiffness and damping factors in the midsoles of running shoes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 41-47. ISSN 1464-4207

2005

Pan, W. and Krohn, K. and Leen, S.B. and Hyde, T.H. and Walloe, S. (2005) A sigmoidal model for superplastic deformation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 219 (3). pp. 149-162. ISSN 1464-4207

2004

Walker, Colin and Gray, Thomas and Nicol, Alexander and Chadwick, E.K.J. (2004) Evaluation of test regimes for stab-resistant body armour. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 355-363. ISSN 1464-4207

Banks, W.M. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded CFRP structures subjected to ageing in various solvents. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 273-281. ISSN 1464-4207

Armstrong, G.S. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. Part 2 - Examination of the failure process and effects of drying. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (3). pp. 183-192. ISSN 1464-4207

Pethrick, R.A. and Armstrong, G.S. and Banks, W.M. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. part 1: examination of moisture absorption. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L3). pp. 169-182.

2001

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) The effect of vibratory stress on the welding microstructure and residual stress distribution. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 215 (2). pp. 99-111. ISSN 1464-4207

2000

Nash, D.H. and Flaherty, A.E. and Banks, W.M. and Fok, W.C. and Tooth, A.S. (2000) The design of twin-saddle supported multi-layered glass-reinforced plastic vessels - the development of a parametric equation for the maximum strain. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 214 (3). pp. 113-128. ISSN 1464-4207