Picture of model of urban architecture

Open Access research that is exploring the innovative potential of sustainable design solutions in architecture and urban planning...

Strathprints makes available scholarly Open Access content by researchers in the Department of Architecture based within the Faculty of Engineering.

Research activity at Architecture explores a wide variety of significant research areas within architecture and the built environment. Among these is the better exploitation of innovative construction technologies and ICT to optimise 'total building performance', as well as reduce waste and environmental impact. Sustainable architectural and urban design is an important component of this. To this end, the Cluster for Research in Design and Sustainability (CRiDS) focuses its research energies towards developing resilient responses to the social, environmental and economic challenges associated with urbanism and cities, in both the developed and developing world.

Explore all the Open Access research of the Department of Architecture. Or explore all of Strathclyde's Open Access research...

Browse by Author or Creator

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Jump to: 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2001
Number of items: 66.

2018

Okorokov, Volodymyr and MacKenzie, Donald and Gorash, Yevgen (2018) Fatigue and corrosion fatigue life assessment with application to autofrettaged parts. In: ASME 2018 Pressure Vessels and Piping Conference. ASME, New York. ISBN 9780791851661

Okorokov, V. and MacKenzie, D. and Gorash, Y. and Morgantini, M. and van Rijswick, R. and Comlekci, T. (2018) High cycle fatigue analysis in the presence of autofrettage compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2305-2320. ISSN 8756-758X

Okorokov, Volodymyr and Morgantini, Marta and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph (2018) Corrosion fatigue of low carbon steel under compressive residual stress field. Procedia Engineering, 213. pp. 674-681. ISSN 1877-7058

Morgantini, Marta and MacKenzie, Donald and Comlekci, Tugrul and van Rijswick, Ralph (2018) The effect of mean stress on corrosion fatigue life. Procedia Engineering, 213. pp. 581-588. ISSN 1877-7058

2017

Connolly, S. and MacKenzie, D. (2017) Hyperelastic material characterisation of rubber by means of novel experimentation and reverse engineering. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Connolly, Stephen John and MacKenzie, Donald and Comlekci, Tugrul (2017) Multi-objective optimization of hyperelastic material constants : a feasibility study. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Gorash, Yevgen and Zhou, Xingguo and Comlekci, Tugrul and Mackenzie, Donald and Bayyouk, Jacob (2017) Consideration of weld distortion throughout the identification of fatigue curve parameters using mean stress correction. In: FATIGUE 2017. Engineering Integrity Society, Rutland, pp. 366-377. ISBN 9780954436834

Okorokov, Volodymyr and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph and Gorash, Yevgen (2017) Implementation of plasticity model for a steel with mixed cyclic softening and hardening and its application to fatigue assessments. In: Fatigue 2017 Proceedings of the 7th Engineering Integrity Society International Conference on Durability & Fatigue. Engineering Integrity Society, Rutland, UK, pp. 72-81. ISBN 9780954436834

Gorash, Yevgen and MacKenzie, Donald (2017) On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour. Open Engineering, 7 (1). pp. 126-140. ISSN 2391-5439

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2017) Investigation of fatigue assessments accuracy for beam weldments considering material data input and FE-mode type. Journal of Physics: Conference Series, 843. ISSN 1742-6596

MacKenzie, Donald (2017) Stress linearization concepts and restrictions in elastic design by analysis. In: ASME 2017 Pressure Vessels and Piping Conference (PVP2017). American Society of Mechanical Engineers, New York. ISBN 978-0-7918-5790-8 (In Press)

2016

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2016) Influence of material data input on accuracy of fatigue assessments for beam weldments. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). ISSN 1617-7061 (In Press)

2015

Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058

Zhou, Xingguo and Mackenzie, Donald and Pan, Wenke (2015) A new distributed cooling method for mitigating residual stress in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

2014

Gorash, Yevgen and Mackenzie, Donald (2014) Cyclic yield strength in definition of design limits for fatigue and creep. Proceedings in Applied Mathematics and Mechanics, PAMM, 14 (1). pp. 365-366. ISSN 1617-7061

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

Gorash, Yevgen and Mackenzie, Donald (2014) Safe structural design for fatigue and creep using cyclic yield strength. In: ECCC - Creep and Fracture Conference 2014, 2014-05-05 - 2014-05-07.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2014) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. Journal of Pressure Vessel Technology, 136 (1). ISSN 0094-9930

2013

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. Journal of Pressure Vessel Technology, 135 (5). ISSN 0094-9930

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109 (Aug-Se). 2–6. ISSN 0308-0161

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A new constitutively accurate lower bound direct shakedown method. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2013) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. Computers and Structures, 118. pp. 59-65. ISSN 0045-7949

Mackenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Case Studies, 10. pp. 19-30. ISSN 1642-236X

2012

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

2011

Ure, James Michael and Chen, Haofeng and Chen, Weihang and Li, Tianbai and Tipping, James and Mackenzie, Donald (2011) A direct method for the evaluation of lower and upper bound ratchet limits. In: 11th International Conference on Mechanical Behaviour of Materials, 2011-06-05 - 2011-06-09.

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in-phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). ISSN 0094-9930

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2011) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. In: 19th Conference of the Association for Computational Mechanics in Engineering, ACME 2011, 2011-04-05 - 2011-04-06.

2010

Hamilton, Robert and Mackenzie, Donald and Li, Hongjun (2010) Multi-physics simulation of friction stir welding process. Engineering Computations, 27 (8). pp. 967-985. ISSN 0264-4401

Li, H. and Mackenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 2041-2975

Carmichael, Rory and Mackenzie, Donald (2010) Elastic-plastic design by analysis for gross plastic collapse. In: Proceedings of the ASME pressure vessels and piping conference 2010. Pressure Vessels and Piping Division of ASME, 2 . American Society of Mechanical Engineers, Washington, USA, pp. 81-87. ISBN 978-0-7918-4921-7

Li, H. and Johnston, R. and Mackenzie, D. (2010) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. Journal of Pressure Vessel Technology, 132 (1). 011205. ISSN 0094-9930

2009

Mackenzie, D. and Li, Hongjun and Hamilton, R. (2009) Multi-physics simulation of friction stir welding process. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19.

Pan, W. and Boyle, J. and Mackenzie, D. (2009) Simulation of the small punch creep test with consideration of variation of material properties. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08.

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). ISSN 0094-9930

2008

Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2008) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. Thin-Walled Structures, 46 (7-9). pp. 963-974. ISSN 0263-8231

Naruse, T. and Mackenzie, D. (2008) Design analysis of ductile failure in dovetail connections. Journal of Strain Analysis for Engineering Design, 43 (5). pp. 295-306. ISSN 0309-3247

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). ISSN 0094-9930

2007

Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2007) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089

Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Camilleri, D. and Naruse, T. and Mackenzie, D. (2007) Gross plastic deformation of a hemispherical head with cylindrical nozzle: a comparative study. In: Pressure Vessel Technologies for the Power and Process Industries (PVP2007/CREEP8), 2007-07-01.

Camilleri, D. and Naruse, T. and Mackenzie, D. (2007) An investigation of allowable static loads calculated by design by analysis. In: Proceedings of the ASME Pressure Vessels and Piping Conference. ASME. ISBN 0791842800

Li, Hongjun and Mackenzie, Donald (2007) Coupled thermo-mechanical modelling of friction stir welding. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. Proceedings of the ASME Pressure Vesels and Piping Conference, 5 . American Society of Mechanical Engineers, New York, pp. 193-201. ISBN 9780791842836

Clarke, J. A. and Connor, G. and Grant, A. D. and Johnstone, C. M. and Mackenzie, D. (2007) Development of a contra-rotating tidal current turbine and analysis of performance. In: Proceedings of the 7th european wave and tidal energy conference. EWTEC, Southampton. ISBN 9789899507937

Li, Hongjun and Johnston, Richard and Mackenzie, Donald (2007) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. ASME, pp. 11-17. ISBN 0-7918-4283-5

2006

Camilleri, Duncan and Hamilton, Robert and Mackenzie, Donald (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Evaluating plastic loads in torispherical heads using a new criterion of collapse. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Shakedown of a thick cylinder with a radial crosshole. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Li, H. and Mackenzie, D. (2006) Plastic collapse analysis of pipe bends under out-of-plane moment and internal pressure loading DBA. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.

Li, Hongjun and Mackenzie, Donald (2006) Characterising plastic collapse of pipe bend structures. International Journal of Pressure Vessels and Piping, 83 (2). pp. 85-95. ISSN 0308-0161

Mackenzie, D. and Li, H. (2006) A plastic load criterion for inelastic design by analysis. Journal of Pressure Vessel Technology, 128 (1). pp. 39-45. ISSN 0094-9930

2005

Li, H. and Mackenzie, D. (2005) Characterising gross plastic deformation in design by analysis. International Journal of Pressure Vessels and Piping, 82 (10). pp. 777-786. ISSN 0308-0161

Mackenzie, D. and Li, H. (2005) A plastic load criterion for inelastic DBA. In: ASME Pressure Vessels and Piping Conference, 2005-07-17 - 2005-07-21.

Robertson, A.C. and Li, H. and Mackenzie, D. (2005) Plastic collapse of pipe bends under combined internal pressure and in-plane bending. International Journal of Pressure Vessels and Piping, 82 (5). pp. 407-416. ISSN 0308-0161

2004

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Shakedown behaviour of thick cylindrical vessels with crossholes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (3). pp. 133-141. ISSN 0954-4089

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Stress concentration at crossholes in thick cylindrical vessels. Journal of Strain Analysis for Engineering Design, 39 (5). pp. 471-481. ISSN 0309-3247

2003

Muscat, Martin and Mackenzie, D. (2003) Elastic shakedown analysis of axisymmetric nozzles. Journal of Pressure Vessel Technology, 125 (4). pp. 365-370. ISSN 0094-9930

Mackenzie, D. and Hamilton, R. and Muscat, Martin (2003) Evaluating shakedown under proportional loading by non-linear static analysis. Computers and Structures, 81 (17). pp. 1727-1737. ISSN 0045-7949

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2003) Shakedown behaviour of thick cylindrical vessels with crossholes. In: Pressure Equipment Technology. Professional Engineering Publishers, London, UK, pp. 67-86. ISBN 978-1-86058-401-5

Muscat, Martin and Mackenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161

2001

Yew, C.K. and Boyle, J.T. and Mackenzie, D. (2001) A computer algebra based finite element development environment. Advances in Engineering Software, 32 (12). pp. 913-925. ISSN 0965-9978

Muscat, Martin and Mackenzie, D. (2001) Shakedown analysis of axi-symmetric nozzles. In: Proceedings of the ASME Pressure Vessels and Piping Conference, 2001-07-22 - 2001-07-26.

This list was generated on Sat Feb 16 08:47:57 2019 GMT.