Browse by Journal or other publication

2024

Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2024) Crack arrest analysis of components with compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures. ISSN 8756-758X (In Press)

2023

Li, Jianxun and Wang, Minghang and Li, Ying and Chen, Haofeng and Zhang, Tairui and Wang, Weiqiang (2023) On the evaluation of uniaxial tensile and fracture properties of Ti‐6Al‐4V by spherical indentation tests with different calculation models. Fatigue and Fracture of Engineering Materials and Structures, 46 (10). pp. 4053-4072. ISSN 8756-758X

2022

Shamir, Muhammad and Igwemezie, Victor and Lotfian, Saeid and Jones, Rhys and Asif, Huzaifa and Ganguly, Supriyo and Mehmanparast, Ali (2022) Assessment of mechanical and fatigue crack growth properties of wire + arc additively manufactured mild steel components. Fatigue and Fracture of Engineering Materials and Structures, 45 (10). pp. 2978-2989. ISSN 8756-758X

Ermakova, Anna and Ganguly, Supriyo and Razavi, Javad and Berto, Filippo and Mehmanparast, Ali (2022) Experimental investigation of the fatigue crack growth behavior in wire arc additively manufactured ER100S-1 steel specimens. Fatigue and Fracture of Engineering Materials and Structures, 45 (2). pp. 371-385. ISSN 8756-758X

2021

Biswal, Romali and Al Mamun, Abdullah and Mehmanparast, Ali (2021) On the performance of monopile weldments under service loading conditions and fatigue damage prediction. Fatigue and Fracture of Engineering Materials and Structures, 44 (6). pp. 1469-1483. ISSN 8756-758X

2020

Igwemezie, Victor and Mehmanparast, Ali and Brennan, Feargal (2020) The influence of microstructure on the fatigue crack growth rate in marine steels in the Paris Region. Fatigue and Fracture of Engineering Materials and Structures, 43 (10). pp. 2416-2440. ISSN 8756-758X

2018

Okorokov, V. and MacKenzie, D. and Gorash, Y. and Morgantini, M. and van Rijswick, R. and Comlekci, T. (2018) High cycle fatigue analysis in the presence of autofrettage compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2305-2320. ISSN 8756-758X

Zheng, X.T. and Dai, W.C. and Chen, H.F. and Shen, J. (2018) Ratcheting effect of reinforced graphite sheet with stainless steel insert (RGSWSSI) under cyclic compression at elevated temperature. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2391-2401. ISSN 8756-758X

Mehmanparast, A. and Taylor, J. and Brennan, F. and Tavares, I. (2018) Experimental investigation of mechanical and fracture properties of offshore wind monopile weldments : SLIC interlaboratory test results. Fatigue and Fracture of Engineering Materials and Structures. ISSN 8756-758X

Al-Turaihi, A. and Mehmanparast, A. and Brennan, F. (2018) The influence of partial surface shot peening on fatigue crack growth behaviour of a high-strength ferritic steel. Fatigue and Fracture of Engineering Materials and Structures, 41 (3). pp. 663-674. ISSN 8756-758X

2017

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2017) Advances on creep-fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures, 40 (11). pp. 1854-1867. ISSN 8756-758X

Adedipe, O. and Brennan, F. and Mehmanparast, A. and Kolios, A. and Tavares, I. (2017) Corrosion fatigue crack growth mechanisms in offshore monopile steel weldments. Fatigue and Fracture of Engineering Materials and Structures, 40 (11). pp. 1868-1881. ISSN 8756-758X

2012

Rahimi, Salaheddin and Marrow, James (2012) Effects of orientation, stress and exposure time on short intergranular stress corrosion crack behaviour in sensitised type 304 austenitic stainless steel. Fatigue and Fracture of Engineering Materials and Structures, 35 (4). pp. 359-373. ISSN 8756-758X

2008

Thursby, G.J. and Betz, D. and Culshaw, B. (2008) Multifunctional fibre optic sensors for monitoring strain and ultrasound. Fatigue and Fracture of Engineering Materials and Structures, 31 (8). pp. 660-673. ISSN 8756-758X

Chetwynd, D. and Rongong, J.A. and Pierce, S.G. and Worden, K., European Union (Funder) (2008) Damage detection in an aluminium plate using outlier analysis. Fatigue and Fracture of Engineering Materials and Structures, 31 (8). pp. 629-643. ISSN 8756-758X

2004

Yu, L. and Das, P.K. and Barltrop, N. (2004) A new look at the effect of bandwidth and non-normality on fatigue damage. Fatigue and Fracture of Engineering Materials and Structures, 27 (1). pp. 51-58. ISSN 8756-758X

Ponter, Alan R.S. and Chen, Haofeng and Willis, M. and Evans, J. (2004) Fatigue-creep and plastic collapse of notched bars. Fatigue and Fracture of Engineering Materials and Structures, 27. pp. 305-318. ISSN 8756-758X