Browse by Author or creator

Article

Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2024) Crack arrest analysis of components with compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures. ISSN 8756-758X (In Press)

Marin Perez, Jonatan Emanuel and Comlekci, Tugrul and Gorash, Yevgen and MacKenzie, Donald (2024) Calibration of the DEM sliding friction and rolling friction parameters of a cohesionless bulk material. Particuology, 92. pp. 126-139. ISSN 2210-4291

Xiao, Xuran and Okorokov, Volodymyr and Mackenzie, Donald (2024) High cycle fatigue analysis with induced residual stress based on fracture mechanics. Procedia Structural Integrity, 52. pp. 111-121. ISSN 2452-3216

Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2023) High cycle fatigue life assessment of notched components with induced compressive residual stress. International Journal of Pressure Vessels and Piping, 206. 105069. ISSN 0308-0161

Milne, Lewis Andrew and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2023) Frequency effects in ultrasonic fatigue testing (UFT) of Q355B structural steel. Procedia Structural Integrity, 42. pp. 623-630. ISSN 2452-3216

Comlekci, Tugrul and Marin Perez, Jonatan and Milne, Lewis and Gorash, Yevgen and MacKenzie, Donald (2023) Structural steel crack propagation experimental and numerical analysis. Procedia Structural Integrity, 42 (2022). pp. 694-701. ISSN 2452-3216

Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald (2021) Critical review of ASME III plasticity correction factors for fatigue design-by-analysis of nuclear power plant components. Journal of Pressure Vessel Technology, 143 (6). 061201. ISSN 0094-9930

Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Higher-order and higher floating-point precision numerical approximations of finite strain elasticity moduli. International Journal for Numerical Methods in Engineering, 120 (10). pp. 1184-1201. ISSN 0029-5981

Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Isotropic hyperelasticity in principal stretches : explicit elasticity tensors and numerical implementation. Computational Mechanics, 64 (5). pp. 1273-1288. ISSN 0178-7675

Okorokov, Volodymyr and Gorash, Yevgen and MacKenzie, Donald and van Rijswick, Ralph (2019) New formulation of nonlinear kinematic hardening model, part I : a Dirac delta function approach. International Journal of Plasticity, 122. pp. 89-114. ISSN 0749-6419

Okorokov, Volodymyr and Gorash, Yevgen and MacKenzie, Donald and van Rijswick, Ralph (2019) New formulation of nonlinear kinematic hardening model, part II : cyclic hardening/softening and ratcheting. International Journal of Plasticity, 122. pp. 244-257. ISSN 0749-6419

CHO, Nak-Kyun and Chen, Haofeng and MacKenzie, Donald and Giugliano, Dario (2019) Investigating the effects of cyclic thermo-mechanical loading on cyclic plastic behaviour of a ninety-degree back-to-back pipe bend system. Journal of Pressure Vessel Technology. ISSN 0094-9930

Okorokov, V. and MacKenzie, D. and Gorash, Y. and Morgantini, M. and van Rijswick, R. and Comlekci, T. (2018) High cycle fatigue analysis in the presence of autofrettage compressive residual stress. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2305-2320. ISSN 8756-758X

Morgantini, Marta and MacKenzie, Donald and Gorash, Yevgen and Van Rijswick, Ralph (2018) The effect of corrosive environment on fatigue life and on mean stress sensitivity factor. MATEC Web of Conferences, 165. 03001. ISSN 2261-236X

Okorokov, Volodymyr and Morgantini, Marta and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph (2018) Corrosion fatigue of low carbon steel under compressive residual stress field. Procedia Engineering, 213. pp. 674-681. ISSN 1877-7058

Morgantini, Marta and MacKenzie, Donald and Comlekci, Tugrul and van Rijswick, Ralph (2018) The effect of mean stress on corrosion fatigue life. Procedia Engineering, 213. pp. 581-588. ISSN 1877-7058

Gorash, Yevgen and MacKenzie, Donald (2017) On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour. Open Engineering, 7 (1). pp. 126-140. ISSN 2391-5439

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2017) Investigation of fatigue assessments accuracy for beam weldments considering material data input and FE-mode type. Journal of Physics: Conference Series, 843. 012025. ISSN 1742-6596

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2016) Influence of material data input on accuracy of fatigue assessments for beam weldments. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). pp. 127-128. 90857. ISSN 1617-7061 (Unpublished)

Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058

Zhou, Xingguo and Mackenzie, Donald and Pan, Wenke (2015) A new distributed cooling method for mitigating residual stress in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Gorash, Yevgen and Mackenzie, Donald (2014) Cyclic yield strength in definition of design limits for fatigue and creep. Proceedings in Applied Mathematics and Mechanics, PAMM, 14 (1). pp. 365-366. ISSN 1617-7061

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2014) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. Journal of Pressure Vessel Technology, 136 (1). 011205. ISSN 0094-9930

Zhou, Xingguo and Pan, Wenke and MacKenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109. 2–6. ISSN 0308-0161

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. Journal of Pressure Vessel Technology, 135 (5). 051202. ISSN 0094-9930

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2013) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. Computers and Structures, 118. pp. 59-65. ISSN 0045-7949

Mackenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Case Studies, 10. pp. 19-30. ISSN 1642-236X

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in-phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). 041201. ISSN 0094-9930

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

Hamilton, Robert and Mackenzie, Donald and Li, Hongjun (2010) Multi-physics simulation of friction stir welding process. Engineering Computations, 27 (8). pp. 967-985. ISSN 0264-4401

Li, H. and Mackenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 2041-2975

Li, H. and Johnston, R. and Mackenzie, D. (2010) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. Journal of Pressure Vessel Technology, 132 (1). 011205. ISSN 0094-9930

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). 011203. ISSN 0094-9930

Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2008) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. Thin-Walled Structures, 46 (7-9). pp. 963-974. ISSN 0263-8231

Naruse, T. and Mackenzie, D. (2008) Design analysis of ductile failure in dovetail connections. Journal of Strain Analysis for Engineering Design, 43 (5). pp. 295-306. ISSN 0309-3247

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). 011202. ISSN 0094-9930

Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089

Camilleri, Duncan and Hamilton, Robert and Mackenzie, Donald (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247

Mackenzie, Donald and Li, Hongjun (2006) A plastic load criterion for inelastic design by analysis. Journal of Pressure Vessel Technology, 128 (1). pp. 39-45. ISSN 0094-9930

Li, Hongjun and Mackenzie, Donald (2006) Characterising plastic collapse of pipe bend structures. International Journal of Pressure Vessels and Piping, 83 (2). pp. 85-95. ISSN 0308-0161

Li, H. and Mackenzie, D. (2005) Characterising gross plastic deformation in design by analysis. International Journal of Pressure Vessels and Piping, 82 (10). pp. 777-786. ISSN 0308-0161

Robertson, A.C. and Li, H. and Mackenzie, D. (2005) Plastic collapse of pipe bends under combined internal pressure and in-plane bending. International Journal of Pressure Vessels and Piping, 82 (5). pp. 407-416. ISSN 0308-0161

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Shakedown behaviour of thick cylindrical vessels with crossholes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (3). pp. 133-141. ISSN 0954-4089

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R. (2004) Stress concentration at crossholes in thick cylindrical vessels. Journal of Strain Analysis for Engineering Design, 39 (5). pp. 471-481. ISSN 0309-3247

Muscat, Martin and Mackenzie, D. (2003) Elastic shakedown analysis of axisymmetric nozzles. Journal of Pressure Vessel Technology, 125 (4). pp. 365-370. ISSN 0094-9930

Mackenzie, D. and Hamilton, R. and Muscat, Martin (2003) Evaluating shakedown under proportional loading by non-linear static analysis. Computers and Structures, 81 (17). pp. 1727-1737. ISSN 0045-7949

Muscat, Martin and Mackenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161

Yew, C.K. and Boyle, J.T. and Mackenzie, D. (2001) A computer algebra based finite element development environment. Advances in Engineering Software, 32 (12). pp. 913-925. ISSN 0965-9978

Book Section

Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald; (2020) Comparative evaluation of plastic design methods for fatigue assessment of a nuclear class 1 piping nozzle. In: ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers(ASME), Virtual, Online. ISBN 9780791883839

Clarkson, David M. and Bell, Christopher D. and Mackenzie, Donald; (2020) Critical review of ASME III plasticity correction factors for fatigue design-by-analysis of nuclear power plant components. In: ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers(ASME), Virtual, Online. ISBN 9780791883815

Connolly, S. and MacKenzie, D. and Gorash, Y.; Huneau, Bertrand and Le Cam, Jean-Benoît and Marco, Yann and Verron, Erwan, eds. (2019) The implications of constitutive model selection in hyperelastic parameter identification. In: Constitutive Models for Rubber XI. CRC Press, FRA. ISBN 9780429324710

Okorokov, Volodymyr and MacKenzie, Donald and Gorash, Yevgen; (2018) Fatigue and corrosion fatigue life assessment with application to autofrettaged parts. In: ASME 2018 Pressure Vessels and Piping Conference. ASME, CZE. ISBN 9780791851661

MacKenzie, Donald; (2017) Stress linearization concepts and restrictions in elastic design by analysis. In: ASME 2017 Pressure Vessels and Piping Conference (PVP2017). American Society of Mechanical Engineers, USA. ISBN 9780791857908

Gorash, Yevgen and Zhou, Xingguo and Comlekci, Tugrul and Mackenzie, Donald and Bayyouk, Jacob; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Consideration of weld distortion throughout the identification of fatigue curve parameters using mean stress correction. In: FATIGUE 2017. Engineering Integrity Society, GBR, pp. 366-377. ISBN 9780954436834

Okorokov, Volodymyr and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph and Gorash, Yevgen; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Implementation of plasticity model for a steel with mixed cyclic softening and hardening and its application to fatigue assessments. In: Fatigue 2017 Proceedings of the 7th Engineering Integrity Society International Conference on Durability & Fatigue. Engineering Integrity Society, GBR, pp. 72-81. ISBN 9780954436834

Carmichael, Rory and Mackenzie, Donald; (2010) Elastic-plastic design by analysis for gross plastic collapse. In: Proceedings of the ASME pressure vessels and piping conference 2010. Pressure Vessels and Piping Division of ASME, 2 . American Society of Mechanical Engineers, USA, pp. 81-87. ISBN 978-0-7918-4921-7

Camilleri, D. and Naruse, T. and Mackenzie, D.; (2007) An investigation of allowable static loads calculated by design by analysis. In: Proceedings of the ASME Pressure Vessels and Piping Conference. ASME. ISBN 0791842800

Li, Hongjun and Mackenzie, Donald; Kisisel, IT, ed. (2007) Coupled thermo-mechanical modelling of friction stir welding. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. Proceedings of the ASME Pressure Vesels and Piping Conference, 5 . American Society of Mechanical Engineers, USA, pp. 193-201. ISBN 9780791842836

Clarke, J. A. and Connor, G. and Grant, A. D. and Johnstone, C. M. and Mackenzie, D.; (2007) Development of a contra-rotating tidal current turbine and analysis of performance. In: Proceedings of the 7th european wave and tidal energy conference. EWTEC, Southampton. ISBN 9789899507937

Li, Hongjun and Johnston, Richard and Mackenzie, Donald; (2007) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. ASME, pp. 11-17. ISBN 0-7918-4283-5

Camilleri, D. and Mackenzie, D. and Hamilton, R.; Armstrong, Cecil, ed. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.

Makulsawatudom, P. and Mackenzie, D. and Hamilton, R.; Banks, W.M. and Nash, D.H., eds. (2003) Shakedown behaviour of thick cylindrical vessels with crossholes. In: Pressure Equipment Technology. Professional Engineering Publishers, London, UK, pp. 67-86. ISBN 978-1-86058-401-5

Conference or Workshop Item

Connolly, S. and MacKenzie, D. (2017) Hyperelastic material characterisation of rubber by means of novel experimentation and reverse engineering. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Connolly, Stephen John and MacKenzie, Donald and Comlekci, Tugrul (2017) Multi-objective optimization of hyperelastic material constants : a feasibility study. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Gorash, Yevgen and Mackenzie, Donald (2014) Safe structural design for fatigue and creep using cyclic yield strength. In: ECCC - Creep and Fracture Conference 2014, 2014-05-05 - 2014-05-07.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A new constitutively accurate lower bound direct shakedown method. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Ure, James Michael and Chen, Haofeng and Chen, Weihang and Li, Tianbai and Tipping, James and Mackenzie, Donald (2011) A direct method for the evaluation of lower and upper bound ratchet limits. In: 11th International Conference on Mechanical Behaviour of Materials, 2011-06-05 - 2011-06-09.

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2011) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. In: 19th Conference of the Association for Computational Mechanics in Engineering, ACME 2011, 2011-04-05 - 2011-04-06.

Mackenzie, D. and Li, Hongjun and Hamilton, R. (2009) Multi-physics simulation of friction stir welding process. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19.

Pan, W. and Boyle, J. and Mackenzie, D. (2009) Simulation of the small punch creep test with consideration of variation of material properties. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08.

Mackenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2007) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.

Camilleri, D. and Naruse, T. and Mackenzie, D. (2007) Gross plastic deformation of a hemispherical head with cylindrical nozzle: a comparative study. In: Pressure Vessel Technologies for the Power and Process Industries (PVP2007/CREEP8), 2007-07-01.

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Evaluating plastic loads in torispherical heads using a new criterion of collapse. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Shakedown of a thick cylinder with a radial crosshole. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Li, H. and Mackenzie, D. (2006) Plastic collapse analysis of pipe bends under out-of-plane moment and internal pressure loading DBA. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Mackenzie, D. and Li, H. (2005) A plastic load criterion for inelastic DBA. In: ASME Pressure Vessels and Piping Conference, 2005-07-17 - 2005-07-21.

Muscat, Martin and Mackenzie, D. (2001) Shakedown analysis of axi-symmetric nozzles. In: Proceedings of the ASME Pressure Vessels and Piping Conference, 2001-07-22 - 2001-07-26.