Picture of model of urban architecture

Open Access research that is exploring the innovative potential of sustainable design solutions in architecture and urban planning...

Strathprints makes available scholarly Open Access content by researchers in the Department of Architecture based within the Faculty of Engineering.

Research activity at Architecture explores a wide variety of significant research areas within architecture and the built environment. Among these is the better exploitation of innovative construction technologies and ICT to optimise 'total building performance', as well as reduce waste and environmental impact. Sustainable architectural and urban design is an important component of this. To this end, the Cluster for Research in Design and Sustainability (CRiDS) focuses its research energies towards developing resilient responses to the social, environmental and economic challenges associated with urbanism and cities, in both the developed and developing world.

Explore all the Open Access research of the Department of Architecture. Or explore all of Strathclyde's Open Access research...

Browse by Journal or other publication

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Jump to: 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2009
Number of items: 37.

2018

Okorokov, Volodymyr and Morgantini, Marta and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph (2018) Corrosion fatigue of low carbon steel under compressive residual stress field. Procedia Engineering, 213. pp. 674-681. ISSN 1877-7058

Morgantini, Marta and MacKenzie, Donald and Comlekci, Tugrul and van Rijswick, Ralph (2018) The effect of mean stress on corrosion fatigue life. Procedia Engineering, 213. pp. 581-588. ISSN 1877-7058

2017

Rosochowski, Andrzej and Olejnik, Lech (2017) New method of producing tailored blanks with constant thickness. Procedia Engineering, 207. pp. 1433-1438. ISSN 1877-7058

Qarni, Muhammad Jawad and Rosochowski, Andrzej and Boczkal, Sonia (2017) Influence of incremental ECAP on the microstructure and tensile behaviour of commercial purity titanium. Procedia Engineering, 207. 1481–1486. ISSN 1877-7058

Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058

Presz, Wojciech and Rosochowska, Malgorzata (2017) Application of semi-physical modelling of interface surface roughness in design of pre-stressed microforming dies. Procedia Engineering, 207. pp. 1004-1009. ISSN 1877-7058

Bylja, Olga and Gomez-Gallegos, Ares and Stefani, Nicola and Blackwell, Paul (2017) Al-Li alloys – the analysis of material behaviour during industrial hot forging. Procedia Engineering, 207. pp. 7-12. ISSN 1877-7058

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2017) Validation of a finite element model of the cold roll forming process on the basis of 3D geometric accuracy. Procedia Engineering, 207. pp. 1278-1283. ISSN 1877-7058

Huang, Jianglin and Slater, Carl D. and Mandral, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207. pp. 478-483. ISSN 1877-7058

Bylya, O. I. and Ward, M. and Krishnamurty, B. and Tamang, S. and Vasin, R. A. (2017) Modelling challenges for incremental bulk processes despite advances in simulation technology : example issues and approaches. Procedia Engineering, 207. pp. 2358-2363. ISSN 1877-7058

Chen, Senyong and Qin, Yi and Choy, Chee-Mun and Chen, J.G. (2017) Testing an injection forging process for the production of automotive fasteners. Procedia Engineering, 207. pp. 508-513. ISSN 1877-7058

Qin, Y. and Zhao, J. and Huang, K. and Zulkipli, M. and Hijji, H. and Yang, Y. and Wu, M. and Yin, D. (2017) Forming of miniature components from powders by combining field-activated sintering and micro-forming. Procedia Engineering, 207. pp. 1212-1217. ISSN 1877-7058

Tamimi, Saeed and Sivaswamy, Giribaskar and Violatos, Ioannis and Moturu, Shanmukha Rao and Rahimi, Salah and Blackwell, Paul (2017) Modelling and experimentation of the evolution of texture in an Al-Mg alloy during earing cupping test. Procedia Engineering, 207. pp. 1-6. ISSN 1877-7058

Gioiella, Laura and Tubaldi, Enrico and Gara, Fabrizio and Dezi, Lugino and Dall'Asta, Andrea (2017) Analysis and comparison of two different configurations of external dissipative systems. Procedia Engineering, 199. pp. 164-169. ISSN 1877-7058

Altieri, Domenico and Tubaldi, Enrico and Patelli, Edoardo and Dall'Asta, Andrea (2017) Assessment of optimal design methods of viscous dampers. Procedia Engineering, 199. pp. 1152-1157. ISSN 1877-7058

Ruzzo, C. and Failla, G. and Collu, M. and Nava, V. and Fiamma, V. and Arena, F. (2017) Output-only identification of rigid body motions of floating structures : a case study. Procedia Engineering, 199. pp. 930-935. ISSN 1877-7058

Asgari, Zeynab and Pour Rahimian, Farzad (2017) Advanced virtual reality applications and intelligent agents for construction process optimisation and defect prevention. Procedia Engineering, 196. pp. 1130-1137. ISSN 1877-7058

Pour Rahimian, Farzad and Goulding, Jack and Akintoye, Akintola and Kolo, Shaba (2017) Review of motivations, success factors, and barriers to the adoption of offsite manufacturing in Nigeria. Procedia Engineering, 196. pp. 512-519. ISSN 1877-7058

Utili, S. and Castellanza, Riccardo and Galli, A. and Sentenac, P. (2017) Non-invasive portable geophysical tool to monitor water content in earthen long linear infrastructures. Procedia Engineering, 189. pp. 86-93. ISSN 1877-7058

Bylja, Olga and Reshetov, Aleksey and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2017) Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys. Procedia Engineering. ISSN 1877-7058 (In Press)

Krishnamurthy, B. and Bylya, O. and Davey, K. (2017) Physical modelling for metal forming processes. Procedia Engineering. ISSN 1877-7058 (In Press)

Allazadeh, Mohammad Reza and Zuelli, Nicola (2017) Metrology and microscopy analysis of multisheet packs manufactured via superplastic forming to study possible diffusion bonding. Procedia Engineering, 183. pp. 251-256. ISSN 1877-7058

2016

Busin, Valentina and Burgess, Stewart and Shu, Wenmiao (2016) A novel multi-pad paper plate (MP3) based assays for rapid animal disease diagnostics. Procedia Engineering, 168. 1418–1421. ISSN 1877-7058

Sadati, Mirshahin Hessam and Javadi, Yashar (2016) Investigation of mechanical properties in welding of shape memory alloys. Procedia Engineering, 149. pp. 438-447. ISSN 1877-7058

2015

Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058

Barbera, D. and Chen, H.F. and Liu, Y.H. (2015) On the creep fatigue behavior of Metal Matrix Composites. Procedia Engineering, 130. pp. 1121-1136. ISSN 1877-7058

Jackson, G.D. and Chen, H.F. and Tipping, D. (2015) Shakedown and creep rupture assessment of a header branch pipe using the Linear Matching Method. Procedia Engineering, 130. pp. 1705-1718. ISSN 1877-7058

Anwar, A.A. and Gorash, Y. and Dempster, W. and Hamilton, R. (2015) Literature research in relevant fields to understand pressure relief valve leak tightness in a static closed state. Procedia Engineering, 130. pp. 95-103. ISSN 1877-7058

Abid, M. and Khan, A. and Nash, D.H. and Hussain, M. and Wajid, H.A. (2015) Simulation of optimized bolt tightening strategies for gasketed flanged pipe joints. Procedia Engineering, 130. pp. 204-213. ISSN 1877-7058

Benghalia, G. and Wood, J. (2015) Autofrettage of weld clad components. Procedia Engineering, 130 (2015). pp. 453-465. ISSN 1877-7058

Kamarudin, Khairul Manami and Ridgway, Keith and Hassan, Mohd Roshdi (2015) Modelling the conceptual design process with hybridization of TRIZ methodology and systematic design approach. Procedia Engineering, 131. pp. 1064-1072. ISSN 1877-7058

Reid, Andrew and Windmill, James F.C. and Uttamchandani, Deepak (2015) Bio-inspired sound localization sensor with high directional sensitivity. Procedia Engineering, 120. pp. 289-293. ISSN 1877-7058

2014

Kolo, Shaba James and Pour Rahimian, Farzad and Goulding, Jack Steven (2014) Offsite manufacturing construction : a big opportunity for housing delivery in Nigeria. Procedia Engineering, 85. pp. 319-327. ISSN 1877-7058

Rosochowski, Andrzej and Rosochowska, Malgorzata and Olejnik, Lech (2014) A method of forming oblique rings. Procedia Engineering, 81. pp. 568-573. ISSN 1877-7058

2013

Alberdi, A. and Suárez, A. and Artaza, T. and Escobar-Palafox, G.A. and Ridgway, K. (2013) Composite cutting with abrasive water jet. Procedia Engineering, 63. pp. 421-429. ISSN 1877-7058

Razali, Akhtar Razul and Qin, Yi (2013) A review on micro-manufacturing, microforming and their key issues. Procedia Engineering, 53. pp. 665-672. ISSN 1877-7058

2009

Hosseini-Toudeshky, H. and Jalalvand, M. and Mohammadi, B. (2009) Delamination analysis of holed composite laminates using interface elements. Procedia Engineering, 1 (1). pp. 39-42. ISSN 1877-7058

This list was generated on Fri Feb 22 18:54:26 2019 GMT.