Browse by Author or creator

2024

Karami, Rasoul and Butler, David and Tamimi, Saeed (2024) Manufacturing of non-grain-oriented electrical steels : review. The International Journal of Advanced Manufacturing Technology, 133 (3-4). pp. 1083-1109. ISSN 1433-3015

Germano, Elmergue and Walker, Joseph and Mills, Brandon and Javadi, Yashar and Buffa, Gianluca and MacLeod, Charles Norman and Gachagan, Anthony and Pierce, Gareth and Mineo, Carmelo and Tamimi, Saeed and Mohseni, Ehsan and Lam, Kwok Ho (2024) Enhancing additive friction stir deposition through comprehensive ultrasonic defect detection and process optimisation. In: UK & IRELAND IEEE ULTRASONICS, FERROELECTRICS AND FREQUENCY CONTROL CHAPTER, 2024-05-14 - 2024-05-14, AUDITORIUM C, TECHNOLOGY AND INNOVATION CENTRE, UNIVERSITY 0F STRATHCLYDE, 99 GEORGE ST, GLASGOW.

Hicks, Calum and Tamimi, Saeed and Sivaswamy, Giribaskar and Pimentel, Misael and Mckegney, Scott and Fitzpatrick, Stephen (2024) Hybrid manufacturing approach for landing gear applications : WAAM Ti–6Al–4V on forged Ti–5Al–5Mo–5V–3Cr. Journal of Materials Research and Technology, 30. pp. 6596-6608. ISSN 2238-7854

2023

Tamimi, Saeed and Huang, Jianglin; Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot, Régis and Balan, Tudor, eds. (2023) Numerical and experimental investigation of deformation characteristics during high-frequency radial forging of AA7075. In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Springer, FRA, pp. 72-79. ISBN 9783031410239

2022

Sanjari, Mehdi and Mahmoudiniya, Mahdi and Pirgazi, Hadi and Tamimi, Saeed and Ghoncheh, Mohammad Hossein and Shahriairi, Ayda and Hadadzadeh, Amir and Amirkhiz, Babak Shalchi and Purdy, Mackenzie and de Araujo, Edgar Gomes and Kestens, Leo and Mohammadi, Mohsen (2022) Microstructure, texture, and anisotropic mechanical behavior of selective laser melted maraging stainless steels. Materials Characterization, 192. 112185. ISSN 1044-5803

Hasani, N. and Ghoncheh, M.H. and Kindermann, R.M. and Pirgazi, H. and Sanjari, M. and Tamimi, S. and Shakerin, S. and Kestens, L.A.I. and Roy, M.J. and Mohammadi, M. (2022) Dislocations mobility in superalloy-steel hybrid components produced using wire arc additive manufacturing. Materials and Design, 220. 110899. ISSN 0261-3069

Tamimi, Saeed and He, Youliang and Sanjari, Mehdi and Pirgazi, Hadi and Kockelmann, Winfried and Robinson, Fiona and Mohammadi, Mohsen and Kestens, Leo (2022) Mechanical properties and crystallographic texture of non-oriented electrical steel processed by repetitive bending under tension. Materials Science and Engineering: A, 835. 142665. ISSN 0921-5093

Saidi, Peyman and Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Mohammadi, Mohsen and Béland, Laurent K. and Daymond, Mark R. and Tamblyn, Isaac (2022) Deep learning and crystal plasticity : a preconditioning approach for accurate orientation evolution prediction. Computer Methods in Applied Mechanics and Engineering, 389. 114392. ISSN 0045-7825

2021

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

Cleaver, Christopher John and Lohmar, Johannes and Tamimi, Saeed (2021) Limits to making L-shape ring profiles without ring growth. Journal of Materials Processing Technology, 292. 117062. ISSN 0924-0136

Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Amirkhiz, Babak Shalchi and Kestens, Leo A. I. and Mohammadi, Mohsen (2021) Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation. Journal of Materials Science, 56 (1). pp. 844-853. ISSN 1573-4803

2020

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Sanjari, Mehdi and Hadadzadeh, Amir and Shahriari, Ayda and Tamimi, Saeed and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Kestens, Leo and Mohammadi, Mohsen; Peng, Zhiwei and Hwang, Jiann-Yang and Downey, Jerome and Gregurek, Dean and Zhao, Baojun and Yucel, Onuralp and Keskinkilic, Ender and Jiang, Tao and White, Jesse and Mahmoud, Morsi, eds. (2020) On the effect of building direction on the microstructure and grain morphology of a selective laser melted maraging stainless steel. In: TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Springer, USA, pp. 285-295. ISBN 978-3-030-36295-9

Tamimi, S. and Moturu, S. and Amirkhiz, B. S. and Sivaswamy, G. and Parameswaran, E. and Blackwell, P. (2020) Formability of AA-7075 sheets subjected to repetitive bending under tension. In: International Conference on Plasticity, Damage & Fracture, 2020-01-03 - 2020-01-09, Barcelo Maya Grand Resort.

2018

Tamimi, Saeed and Gracio, Jose J. and Lopes, Augusto B. and Ahzi, Said and Barlat, Frederic (2018) Asymmetric rolling of interstitial free steel sheets : microstructural evolution and mechanical properties. Journal of Manufacturing Processes, 31. 583–592. ISSN 1526-6125

2017

Tamimi, Saeed and Sivaswamy, Giribaskar and Violatos, Ioannis and Moturu, Shanmukha Rao and Rahimi, Salah and Blackwell, Paul (2017) Modelling and experimentation of the evolution of texture in an Al-Mg alloy during earing cupping test. Procedia Engineering, 207. pp. 1-6. ISSN 1877-7058

Salamati, M and Tamimi, S and Moturu, Shanmukha Rao and Sivaswamy, G and Qarni, M and Rosochowski, A (2017) Microstructure and mechanical properties of Al-1050 during incremental ECAP. IOP Conference Series: Materials Science and Engineering, 194. 012009. ISSN 1757-899X

2016

Salamati, Mohammad and Qarni, Muhammad Jawad and Tamimi, Saeed and Rosochowski, Andrzej (2016) Effect of channel angle on the material flow and hardness distribution during incremental ECAP of Al-1050 billets. In: The 19th International ESAFORM Conference on Material Forming, 2016-04-27 - 2016-04-29, Nantes Congress Center.

Bell, Colin and Tamimi, Saeed and Corney, Jonathan and Savings, David and Zuelli, Nicola (2016) Research directions in hydroforming technology. In: 19th International ESAFORM Conference on Material Forming – ESAFORM 2016, 2016-04-27 - 2016-04-29, Nantes Congress Center.

2015

Tamimi, Saeed and Andrade-Campos, A. and Pinho-da-Cruz, J. (2015) Modelling the Portevin-Le Chatelier effects in aluminium alloys. Journal of the Mechanical Behavior of Materials, 24 ((3-4)). pp. 67-78. ISSN 2191-0243

Sanjari, M and Tamimi, Saeed and Su, J and Utsunomiya, H. and Petrov, R. and Kestens, L.; Skrotzki, Werner and Oertel, Carl-Georg, eds. (2015) Study of deformation texture in an AZ31 magnesium alloy rolled at wide range of rolling speed and reductions. In: 17th International Conference on Textures of Materials (ICOTOM 17) 24–29 August 2014, Dresden, Germany. IOP Conference Series: Materials Science and Engineering, 82 . IOP Publishing, DEU. ISBN 9781510802964

2014

Tamimi, Saeed and Ketabchi, Mostafa and Parvin, Nader and Sanjari, Mehdi and Lopes, Augusto (2014) Accumulative roll bonding of pure copper and IF steel. International Journal of Metals, 2014. 179723. ISSN 2314-680X