Browse by Journal or other publication

2024

Wadge, Matthew D. and Agyakwa, Pearl A. and Felfel, Reda M. and Homer, Richard and Cooper, Timothy P. and Kudrynskyi, Zakhar R. and Lester, Edward and Ahmed, Ifty and Grant, David M. (2024) Self-assembled titanium-based macrostructures with hierarchical (macro-, micro-, and nano) porosities : a fundamental study. Materials and Design, 240. 112835. ISSN 0264-1275

2023

Davis, Geo and Stratoudaki, Theodosia and Lukacs, Peter and Riding, Matthew W. and Al Fuwaires, Ahmed and Kamintzis, Panagiotis and Pieris, Don and Keenan, Alan and Wilcox, Paul and Pierce, Gareth and MacLeod, Charles and Williams, Stewart (2023) Near-surface defect detection in additively manufactured components using laser induced phased arrays with surface acoustic wave crosstalk suppression. Materials and Design, 236. 112453. ISSN 0261-3069

2022

Loukas, Charalampos and Warner, Veronica and Jones, Richard and MacLeod, Charles N. and Vasilev, Momchil and Mohseni, Ehsan and Dobie, Gordon and Sibson, Jim and Pierce, Stephen G. and Gachagan, Anthony (2022) A sensor enabled robotic strategy for automated defect-free multi-pass high-integrity welding. Materials and Design, 224. 111424. ISSN 0261-3069

Hasani, N. and Ghoncheh, M.H. and Kindermann, R.M. and Pirgazi, H. and Sanjari, M. and Tamimi, S. and Shakerin, S. and Kestens, L.A.I. and Roy, M.J. and Mohammadi, M. (2022) Dislocations mobility in superalloy-steel hybrid components produced using wire arc additive manufacturing. Materials and Design, 220. 110899. ISSN 0261-3069

Klicova, Marketa and Oulehlova, Zuzana and Klapstova, Andrea and Hejda, Matěj and Krejcik, Michal and Novak, Ondrej and Mullerova, Jana and Erben, Jakub and Rosendorf, Jachym and Palek, Richard and Liska, Vaclav and Fucikova, Anna and Chvojka, Jiri and Zvercova, Iveta and Horakova, Jana (2022) Biomimetic hierarchical nanofibrous surfaces inspired by superhydrophobic lotus leaf structure for preventing tissue adhesions. Materials and Design, 217. 110661. ISSN 0264-1275

2021

Mohseni, Ehsan and Javadi, Yashar and Sweeney, Nina E. and Lines, David and MacLeod, Charles N. and Vithanage, Randika K.W. and Qiu, Zhen and Vasilev, Momchil and Mineo, Carmelo and Lukacs, Peter and Foster, Euan and Pierce, S. Gareth and Gachagan, Anthony (2021) Model-assisted ultrasonic calibration using intentionally embedded defects for in-process weld inspection. Materials and Design, 198. 109330. ISSN 0261-3069

Liu, Qi and Liao, Zhirong and Cheng, Jian and Xu, Dongdong and Chen, Mingjun (2021) Mechanism of chip formation and surface-defects in orthogonal cutting of soft-brittle potassium dihydrogen phosphate crystals. Materials and Design, 198. 109327. ISSN 0264-1275

Huang, Jianfeng and McGlinchey, Don and Chen, Yi and McMahon, Daniel (2021) Cross-scale analysis of nickel Superalloy fatigue using Markov state model-molecular dynamics method. Materials and Design, 197. 109226. ISSN 0264-1275

2020

Javadi, Yashar and Sweeney, Nina E. and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Qiu, Zhen and Vithanage, Randika K.W. and Mineo, Carmelo and Stratoudaki, Theodosia and Pierce, Stephen G. and Gachagan, Anthony (2020) In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding. Materials and Design, 195. 108981. ISSN 0261-3069

Javadi, Yashar and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Mineo, Carmelo and Foster, Euan and Pierce, Stephen G. and Gachagan, Anthony (2020) Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system. Materials and Design, 191. 108655. ISSN 0261-3069

2019

Obande, Winifred and Mamalis, Dimitrios and Ray, Dipa and Yang, Liu and Ó Brádaigh, Conchúr M. (2019) Mechanical and thermomechanical characterisation of vacuum-infused thermoplastic- and thermoset-based composites. Materials and Design, 175. 107828. ISSN 0264-1275

2018

Felfel, Reda M. and Gupta, Dhanak and Zabidi, Adi Z. and Prosser, Amy and Scotchford, Colin A. and Sottile, Virginie and Grant, David M. (2018) Performance of multiphase scaffolds for bone repair based on two-photon polymerized poly(D,L-lactide-co-ɛ-caprolactone), recombinamers hydrogel and nano-HA. Materials and Design, 160. pp. 455-467. ISSN 0264-1275

2017

Mehmanparast, Ali and Brennan, Feargal and Tavares, Isaac (2017) Fatigue crack growth rates for offshore wind monopile weldments in air and seawater : SLIC inter-laboratory test results. Materials and Design, 114. pp. 494-504. ISSN 0264-1275

2016

Falsafi, Javad and Demirci, Emrah (2016) Micro-Indentation based study on steel sheet degradation through forming and flattening : toward a predictive model to assess cold recyclability. Materials and Design, 109. pp. 456-465. ISSN 0261-3069

Yáñez-González, Álvaro and van Wachem, Berend and Skinner, Stephen and Beyrau, Frank and Heyes, Andrew (2016) On the kinetics of thermal oxidation of the thermographic phosphor BaMgAL10O17:Eu. Materials and Design, 108. pp. 145-150. ISSN 0264-1275

Bitharas, I. and Campbell, S.W. and Galloway, A.M. and McPherson, N.A. and Moore, A.J. (2016) Visualisation of alternating shielding gas flow in GTAW. Materials and Design, 91. pp. 424-431. ISSN 0261-3069

2015

Lipińska, Marta and Olejnik, Lech and Pietras, Adam and Rosochowski, Andrzej and Bazarnik, Piotr and Goliński, Jacek and Brynk, Tomasz and Lewandowska, Małgorzata (2015) Microstructure and mechanical properties of friction stir welded joints made from ultrafine grained aluminium 1050. Materials and Design, 88. pp. 22-31. ISSN 0264-1275

Stevenson, Ryan and Toumpis, Athanasios and Galloway, Alexander (2015) Defect tolerance of friction stir welds in DH36 steel. Materials and Design, 87. pp. 701-711. ISSN 0261-3069

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2015) Effect of cryogenic temperature and change of strain path on grain refinement during rolling of Cu-30Zn brass. Materials and Design, 86. pp. 913-921. ISSN 0264-1275

Javadi, Yashar and Ashoori, Masoud (2015) Sub-surface stress measurement of cross welds in a dissimilar welded pressure vessel. Materials and Design, 85. pp. 82-90. ISSN 0264-1275

Toumpis, Athanasios and Galloway, Alexander and Molter, Lars and Polezhayeva, Helena (2015) Systematic investigation of the fatigue performance of a friction stir welded low alloy steel. Materials and Design, 80. pp. 116-128. ISSN 0261-3069

Hamilton, Niall Robert and Wood, James and Easton, David and Olsson Robbie, Mikael and Zhang, Yuxuan and Galloway, Alexander (2015) Thermal autofrettage of dissimilar material brazed joints. Materials and Design, 67. pp. 405-412. ISSN 0261-3069

Tingey, Christopher and Galloway, Alexander and Toumpis, Athanasios and Cater, Stephen R. (2015) Effect of tool centreline deviation on the mechanical properties of friction stir welded DH36 steel. Materials and Design, 65. pp. 896-906. ISSN 0261-3069

2014

Maltin, Charles and Nolton, Lauren J. and Scott, Jamie L. and Toumpis, Athanasios I. and Galloway, Alexander M. (2014) The potential adaptation of stationary shoulder friction stir welding technology to steel. Materials and Design, 64. pp. 614-624. ISSN 0261-3069

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen and McPherson, Norman (2014) Development of a process envelope for friction stir welding of DH36 steel : a step change. Materials and Design, 62. pp. 64-75. ISSN 0261-3069

Javadi, Yashar and Sadeghi, Seyedali and Najafabadi, Mehdi Ahmadi (2014) Taguchi optimization and ultrasonic measurement of residual stresses in the friction stir welding. Materials and Design, 55. pp. 27-34. ISSN 0264-1275

2013

Sadeghi, Seyedali and Najafabadi, Mehdi Ahmadi and Javadi, Yashar and Mohammadisefat, Mohammadjavad (2013) Using ultrasonic waves and finite element method to evaluate through-thickness residual stresses distribution in the friction stir welding of aluminum plates. Materials and Design, 52. pp. 870-880. ISSN 0261-3069

Javadi, Yashar and Pirzaman, Hamed Salimi and Raeisi, Mohammadreza Hadizadeh and Najafabadi, Mehdi Ahmadi (2013) Ultrasonic inspection of a welded stainless steel pipe to evaluate residual stresses through thickness. Materials and Design, 49. pp. 591-601. ISSN 0261-3069

Javadi, Yashar and Najafabadi, Mehdi Ahmadi (2013) Comparison between contact and immersion ultrasonic method to evaluate welding residual stresses of dissimilar joints. Materials and Design, 47. pp. 473-482. ISSN 0261-3069

Javadi, Yashar and Akhlaghi, Mehdi and Najafabadi, Mehdi Ahmadi (2013) Using finite element and ultrasonic method to evaluate welding longitudinal residual stress through the thickness in austenitic stainless steel plates. Materials and Design, 45. pp. 628-642. ISSN 0264-1275

2012

Da Costa Mattos, Heraldo and Monteiro, Antonio and Palazzetti, Roberto (2012) Failure analysis of adhesively bonded joints in composite materials. Materials and Design, 33 (1). pp. 242-247. ISSN 0261-3069

2011

Wood, Paul and Schley, C.A. and Williams, Mark A and Rusinek, A. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials and Design, 32 (4). pp. 2246-2259. ISSN 0264-1275

2007

Tan, Xincai and Chen, Xiaogang and Conway, Paul P. and Yan, X.T. (2007) Effects of plies assembling on textile composite cellular structures. Materials and Design, 28 (3). pp. 857-870. ISSN 0261-3069