Ultrasonic inspection of a welded stainless steel pipe to evaluate residual stresses through thickness

Javadi, Yashar and Pirzaman, Hamed Salimi and Raeisi, Mohammadreza Hadizadeh and Najafabadi, Mehdi Ahmadi (2013) Ultrasonic inspection of a welded stainless steel pipe to evaluate residual stresses through thickness. Materials and Design, 49. pp. 591-601. ISSN 0261-3069

[thumbnail of Javadi-etal-MD-2013-Ultrasonic-inspection-of-a-welded-stainless-steel-pipe-to-evaluate]
Preview
Text (Javadi-etal-MD-2013-Ultrasonic-inspection-of-a-welded-stainless-steel-pipe-to-evaluate)
Javadi_etal_MD_2013_Ultrasonic_inspection_of_a_welded_stainless_steel_pipe_to_evaluate.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo

Download (649kB)| Preview

    Abstract

    This study investigates ultrasonic method in axial and hoop stress measurement through thickness of an austenitic stainless steel pipe. Longitudinal critically refracted (LCR) waves are employed to measure the welding residual stresses while outer and inner surfaces of the pipe are inspected by using different frequency range of ultrasonic transducers. The acoustoelastic constant is measured on a plate with the same material and thickness of the investigated pipe to keep the pipe intact. Welding process of the pipe is simulated by a 3D finite element (FE) model which is validated by hole-drilling method performed on 25 points. The residual stresses calculated by FE simulation are then compared with those obtained from the ultrasonic measurement while a good agreement is observed. It is demonstrated that the residual stresses through thickness of the stainless steel pipe can be evaluated by combining FE and LCR method (known as FELCR method).

    ORCID iDs

    Javadi, Yashar ORCID logoORCID: https://orcid.org/0000-0001-6003-7751, Pirzaman, Hamed Salimi, Raeisi, Mohammadreza Hadizadeh and Najafabadi, Mehdi Ahmadi;