Browse by Author or creator

2024

Puthanveettil Madathil, Abhilash and Luo, Xichun and Liu, Qi and Walker, Charles and Madarkar, Rajeshkumar and Cai, Yukui and Liu, Zhanqiang and Chang, Wenlong and Qin, Yi (2024) Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smart manufacturing processes. Journal of Intelligent Manufacturing, 35 (8). pp. 4159-4180. ISSN 0956-5515

Puthanveettil Madathil, Abhilash and Walker, Charlie and Luo, Xichun and Liu, Qi and Madarkar, Rajeshkumar and Qin, Yi (2024) XAI-driven digital twin for cobot dynamic error compensation. Procedia CIRP, 126. pp. 176-181. ISSN 2212-8271

Wang, Zhengjian and Luo, Xichun and Sun, Jining and Seib, Philipp and Phuagkhaopong, Suttinee and Xie, Wenkun and Chang, Wenlong and Liu, Qi and Chen, Xiuyuan (2024) Chip breakage in silk microfibre production using elliptical vibration turning. International Journal of Mechanical Sciences, 277. 109418. ISSN 0020-7403

Madarkar, Rajeshkumar and Luo, Xichun and Walker, Charles and Puthanveettil Madathil, Abhilash and Liu, Qi (2024) Prospects of digital twin for dynamic life cycle assessment of smart manufacturing systems. MATEC Web of Conferences, 401. 13006. ISSN 2261-236X

Walker, Charles and Puthanveettil Madathil, Abhilash and Luo, Xichun and Madarkar, Rajeshkumar and Liu, Qi (2024) A digital twin-driven ultra-precision machining system. MATEC Web of Conferences, 401. 13009. ISSN 2261-236X

Puthanveettil Madathil, Abhilash and Luo, Xichun and Liu, Qi and Madarkar, Rajeshkumar and Walker, Charles (2024) A fingerprint approach for computationally efficient digital twins of precision manufacturing processes. MATEC Web of Conferences, 401. 13004. ISSN 2261-236X

Luo, Xichun and Liu, Qi and Puthanveettil Madathil, Abhilash and Xie, Wenkun (2024) Predictive digital twin-driven dynamic error control for slow-tool-servo ultraprecision diamond turning. CIRP Annals - Manufacturing Technology, 73 (1). pp. 377-380. ISSN 0007-8506

Wang, Zhengjian and Luo, Xichun and Hasan, Rashed Md Murad and Xie, Wenkun and Chang, Wenlong and Liu, Qi (2024) Design of a low-cost, high-precision rolling nanoelectrode lithography machine for manufacturing nanoscale products. In: 24th Euspen International Conference & Exhibition, 2024-06-10 - 2024-06-14, University College Dublin.

Piao, Yinchuan and Luo, Xichun and Li, Chen and Liu, Qi and Zhang, Feihu (2024) The anisotropy of deformation behaviors of MgF2 single crystal. In: 24th Euspen International Conference & Exhibition, 2024-06-10 - 2024-06-14, University College Dublin.

Tan, Rongkai and Jin, Shijing and Wei, Shuangquan and Wang, Jiacheng and Zhao, Xuesen and Wang, Zhanfeng and Liu, Qi and Sun, Tao (2024) Evolution mechanism of microstructure and microhardness of Ti–6Al–4V alloy during ultrasonic elliptical vibration assisted ultra-precise cutting. Journal of Materials Research and Technology, 30. pp. 1641-1649. ISSN 2238-7854

2023

Walker, Charles and Luo, Xichun and P M, Abhilash and Liu, Qi and Madarkar, Rajeshkumar and Yang, Erfu (2023) Digital twin of dynamic error of a collaborative robot. In: Euspen's 23rd International Conference & Exhibition, Copenhagen, Denmark, 2023-06-12 - 2023-06-16.

Liu, Qi and Cheng, Jian and Liao, Zhirong and Liu, Mingyu and Chen, Mingjun and Zhao, Linjie and Lei, Hongqin and Ding, Wenyu (2023) Fractal analysis on machined surface morphologies of soft-brittle KDP crystals processed by micro ball-end milling. Materials, 16 (5). 1782. ISSN 1996-1944

2022

Tan, Rongkai and Zhao, Xuesen and Liu, Qi and Guo, Xianmin and Lin, Fengtao and Yang, Liquan and Sun, Tao (2022) Investigation of surface integrity of selective laser melting additively manufactured AlSi10Mg alloy under ultrasonic elliptical vibration-assisted ultra-precision cutting. Materials, 15 (24). 8910. ISSN 1996-1944

2021

Liu, Qi and Chen, Mingjun and Liao, Zhirong and Feng, Junyuan and Xu, Dongdong and Cheng, Jian (2021) On the improvement of the ductile removal ability of brittle KDP crystal via temperature effect. Ceramics International, 47 (23). pp. 33127-33139. ISSN 0272-8842

Yang, Hao and Cheng, Jian and Liu, Zhichao and Liu, Qi and Zhao, Linjie and Tan, Chao and Wang, Jian and Chen, Mingjun (2021) Application of light diffraction theory to qualify the downstream light field modulation property of mitigated KDP crystals. Optics and Laser Technology, 138. 106873. ISSN 0030-3992

Liu, Qi and Liao, Zhirong and Cheng, Jian and Xu, Dongdong and Chen, Mingjun (2021) Mechanism of chip formation and surface-defects in orthogonal cutting of soft-brittle potassium dihydrogen phosphate crystals. Materials and Design, 198. 109327. ISSN 0264-1275

2020

Yang, Hao and Cheng, Jian and Liu, Zhichao and Liu, Qi and Zhao, Linjie and Tan, Chao and Wang, Jian and Chen, Mingjun (2020) Secondary peak of downstream light field modulation caused by Gaussian mitigation pits on the rear KDP surface. Optics Express, 28 (19). pp. 28479-28490. ISSN 1094-4087

Yang, Hao and Cheng, Jian and Liu, Zhichao and Liu, Qi and Zhao, Linjie and Tan, Chao and Wang, Jian and Chen, Mingjun (2020) Model development for nanosecond laser-induced damage caused by manufacturing-induced defects on potassium dihydrogen phosphate crystals. ACS Omega, 5 (31). pp. 19884-19895. ISSN 2470-1343

Liu, Qi and Cheng, Jian and Yang, Hao and Zhao, Linjie and Tan, Chao and Chen, Mingjun; Leach, Richard K. and Billington, David and Nisbet, C. and Phillips, D., eds. (2020) An investigation on laser-induced damage resistance of KDP optics repaired by different micro-milling strategies. In: Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020 . euspen, AUT, pp. 99-100. ISBN 9780995775176

Tan, Chao and Zhao, Linjie and Chen, Mingjun and Cheng, Jian and Wu, Chunya and Liu, Qi and Yang, Hao and Yin, Zhaoyang and Liao, Wei (2020) Experimental and theoretical investigation of localized CO2 laser interaction with fused silica during the process of surface damage mitigation. Results in Physics, 16. 102936. ISSN 2211-3797

Yang, Hao and Cheng, Jian and Liu, Zhichao and Liu, Qi and Zhao, Linjie and Wang, Jian and Chen, Mingjun (2020) Dynamic behavior modeling of laser-induced damage initiated by surface defects on KDP crystals under nanosecond laser irradiation. Scientific Reports, 10 (1). 500. ISSN 2045-2322

2019

Cheng, Jian and Yang, Hao and Liu, Qi and Zhao, Linjie and Liu, Zhichao and Liu, Henan and Wang, Tingzhang and Xiao, Yong and Hu, Kehui and Chen, Mingjun and Tan, Jiubin (2019) Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal. Results in Physics, 15. 102753. ISSN 2211-3797

Liu, Qi and Cheng, Jian and Yang, Hao and Xu, Yafei and Zhao, Linjie and Tan, Chao and Chen, Mingjun (2019) Modeling of residual tool mark formation and its influence on the optical performance of KH2PO4 optics repaired by micro-milling. Optical Materials Express, 9 (9). pp. 3789-3807. ISSN 2159-3930

Zhao, Linjie and Cheng, Jian and Chen, Mingjun and Yuan, Xiaodong and Liao, Wei and Liu, Qi and Yang, Hao and Wang, Haijun (2019) Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing. International Journal of Extreme Manufacturing, 1 (3). 035001. ISSN 2631-7990

Liu, Qi and Cheng, Jian and Liao, Zhirong and Yang, Hao and Zhao, Linjie and Chen, Mingjun (2019) Incident laser modulation by tool marks on micro-milled KDP crystal surface : numerical simulation and experimental verification. Optics and Laser Technology, 119. 105610. ISSN 0030-3992

2018

Liu, Qi and Cheng, Jian and Xiao, Yong and Chen, Mingjun and Yang, Hao and Wang, Jinghe (2018) Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling. International Journal of Advanced Manufacturing Technology, 99 (9-12). pp. 2777-2788. ISSN 1433-3015

Liu, Qi and Cheng, Jian and Xiao, Yong and Yang, Hao and Chen, Mingjun (2018) Effect of milling modes on surface integrity of KDP crystal processed by micro ball-end milling. Procedia CIRP, 71. pp. 260-266. ISSN 2212-8271

2017

Yang, Hao and Cheng, Jian and Chen, Mingjun and Wang, Jian and Liu, Zhichao and An, Chenhui and Zheng, Yi and Hu, Kehui and Liu, Qi (2017) Optimization of morphological parameters for mitigation pits on rear KDP surface : experiments and numerical modeling. Optics Express, 25 (15). pp. 18332-18345. ISSN 1094-4087