Picture of a satellite.

Open Access research that solves space system engineering problems...

Strathprints makes available scholarly Open Access content by scholars in the Department of Mechanical & Aerospace Engineering (MAE), based within the Faculty of Engineering.

Research at MAE includes research into space systems engineering and spaceflight mechanics. This spans a wide variety of topics such as nano-satellites, self-assembling spacecraft, orbital dynamics, trajectory design and optimization, autonomous navigation and planning, all under the auspices of the Aerospace Centre of Excellence - and with almost all research outputs openly available through Strathprints.

Explore the Open Access research of the Aerospace Centre of Excellence or the wider MAE department. Or explore all of Strathclyde's Open Access research...

Browse by Journal or other publication

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Jump to: 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006
Number of items: 32.

2019

Adu-Amankwa, Kwaku and Attia, Ashraf K.A. and Janardhanan, Mukund Nilakantan and Patel, Imran (2019) A predictive maintenance cost model for CNC SMEs in the era of industry 4.0. International Journal of Advanced Manufacturing Technology, 104 (9-12). pp. 3567-3587. ISSN 0268-3768

Marini, Daniele and Corney, Jonathan R. (2019) Process selection methodology for near net shape manufacturing. International Journal of Advanced Manufacturing Technology. pp. 1-30. ISSN 0268-3768 (In Press)

2018

Morar, Nicolau Iralal and Roy, Rajkumar and Mehnen, Jörn and Marithumu, Sundar and Gray, Simon and Roberts, Tracey and Nicholls, John (2018) Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

2017

Gomez-Gallegos, A. and Mill, F. and Mount, A. R. and Duffield, S. and Sherlock, A. (2017) 3D multiphysics model for the simulation of electrochemical machining of stainless steel (SS316). International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Mir, Amir and Luo, Xichun and Cheng, Kai and Cox, Andrew (2017) Investigation of influence of tool rake angle in single point diamond turning of silicon. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Li, Zhipeng and Zhang, Feihu and Zhang, Yong and Luo, Xichun (2017) Experimental investigation on the surface and subsurface damages characteristics and formation mechanisms in ultra-precision grinding of SiC. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

2016

Bai, Q. and Mohamed, M. and Shi, Z. and Lin, J. and Dean, T. (2016) Application of a continuum damage mechanics (CDM)-based model for predicting formability of warm formed aluminium alloy. International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768

Mir, Amir Sarwar and Luo, Xichun and Siddiq, Amir (2016) Smooth particle hydrodynamics study of surface defect machining for diamond turning of silicon. International Journal of Advanced Manufacturing Technology. pp. 1-16. ISSN 0268-3768

Fowler, Steven and Toumpis, Athanasios and Galloway, Alexander (2016) Fatigue and bending behaviour of friction stir welded DH36 steel. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2659-2669. ISSN 0268-3768

Chen, Wanqun and Luo, Xichun and Su, Hao and Wardle, Frank (2016) An integrated system for ultra-precision machine tool design in conceptual and fundamental design stage. International Journal of Advanced Manufacturing Technology, 84 (5). pp. 1177-1183. ISSN 0268-3768

2015

Tong, Zhen and Luo, Xichun and Sun, Jining and Liang, Yingchun and Jiang, Xiangqian (2015) Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool. International Journal of Advanced Manufacturing Technology, 80 (1). pp. 699-710. ISSN 0268-3768

Ley, F.H. and Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2015) Effect of shielding gas parameters on weld metal thermal properties in gas metal arc welding. International Journal of Advanced Manufacturing Technology, 80 (5). pp. 1213-1221. ISSN 0268-3768

2014

Tong, Zhen and Liang, Yingchun and Yang, Xuechun and Luo, Xichun (2014) Investigation on the thermal effects during nanometric cutting process while using nanoscale diamond tools. International Journal of Advanced Manufacturing Technology, 74 (9-12). pp. 1709-1718. ISSN 0268-3768

Chen, Wanqun and Liang, Yingchun and Luo, Xichun and Sun, Yazhou and Wang, Heran (2014) Multi-scale surface simulation of the KDP crystal fly cutting machining. International Journal of Advanced Manufacturing Technology, 73 (1-4). pp. 289-297. ISSN 0268-3768

Liang, Yingchun and Chen, Wanqun and Sun, Yazhou and Luo, Xichun and Lu, Lihua and Liu, Haitao (2014) A mechanical structure-based design method and its implementation on a fly-cutting machine tool design. International Journal of Advanced Manufacturing Technology, 70 (9-12). pp. 1915-1921. ISSN 0268-3768

2013

Huang, Kunlan and Yang, Yi and Qin, Yi and Gang, Yang (2013) Densification behavior of copper powder during the coupled multi-physics fields-activated microforming. International Journal of Advanced Manufacturing Technology, 69 (9-12). pp. 2651-2657. ISSN 0268-3768

Barclay, C. J. and Campbell, S. W. and Galloway, A. M. and McPherson, N. A. (2013) Artificial neural network prediction of weld distortion rectification using a travelling induction coil. International Journal of Advanced Manufacturing Technology, 68 (1-4). pp. 127-140. ISSN 0268-3768

Mandal, Paranjayee and Paul, Soumitra (2013) Effect of alloyed target vis-à-vis pure target on machining performance of TiAlN coating. International Journal of Advanced Manufacturing Technology, 66 (5-6). pp. 721-731. ISSN 0268-3768

2012

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Techno-economic evaluation of reducing shielding gas consumption in GMAW whilst maintaining weld quality. International Journal of Advanced Manufacturing Technology, 63 (9-12). pp. 975-985.

2011

Luo, X. and Sun, J. and Ritchie, J.M. and Chang, W. and Wang, W. (2011) Deterministic fabrication of nanostructures for plasmonic lens by focused ion beam. International Journal of Advanced Manufacturing Technology, 57 (9-12). pp. 1003-1009. ISSN 0268-3768

Amir, Muhammad and Ghassemieh, Elaheh (2011) Fibre embedding in aluminium alloy 3003 using ultrasonic consolidation process - thermomechanical analyses. International Journal of Advanced Manufacturing Technology, 54 (9-12). pp. 182-202.

2010

Qin, Y. and Brockett, A. and Ma, Y. and Razali, A. and Zhao, J. and Harrison, C. and Pan, W. and Dai, X. and Loziak, D. (2010) Micro-manufacturing : research, technology outcomes and development issues. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 821-837. ISSN 0268-3768

Dai, Xiaojun and Qin, Yi and Ma, Lingxiao and Juster, Neil (2010) A knowledge-based design advisory system for collaborative design for micromanufacturing. International Journal of Advanced Manufacturing Technology, 47 (9). pp. 973-979. ISSN 0268-3768

Zhou, M. and Qin, Y. and Harrison, C.S. and Brockett, A. and Ma, Y. (2010) Finite-element and experimental analysis of dynamic behaviours of a micro-stamping tool system. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 839-844.

Chronakis, Ioannis S. and Mekras, Nikolaos D. and Wiesauer, Karin and Breuer, Eva and Stifter, David and Fuentes, Gonzalo F. and Qin, Yi (2010) MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 963-971. ISSN 0268-3768

2009

Qin, Yi and Díaz de Cerio, M.J. and Fuentes, G.G. and Martínez, R. and Rodriguez, R. and Spain, E. and Housden, J. and Hörnig, W. (2009) Temperature-dependent contact phenomena of PVD- and CVD-deposited DLC films sliding on the thin aluminium foil. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

2008

Pan, W. and Qin, Yi and Law, F. and Ma, Y. and Brockett, A. and Juster, N.P. (2008) Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming. International Journal of Advanced Manufacturing Technology, 38 (3-4). pp. 393-401. ISSN 0268-3768

Qin, Yi and Zhou, J. and Peng, X. (2008) A coupled thermal-mechanical analysis of a mould-billet system during continuous casting. International Journal of Advanced Manufacturing Technology, 42 (5-6). pp. 421-428. ISSN 0268-3768

Levie, J.D. and Majid, I.A. and Cooper, S. and Ismail, K. (2008) Entrepreneurial Management and Technology-based Firm Performance. International Journal of Advanced Manufacturing Technology, 2 (1). pp. 79-98. ISSN 0268-3768

2007

Rosochowski, A. and Presz, W. and Olejnik, L. and Richert, M. (2007) Micro-extrusion of ultrafine grained aluminium. International Journal of Advanced Manufacturing Technology, 33 (1-2). pp. 137-146. ISSN 0268-3768

Antony, Jiju (2007) Development of an experiment-based robust design paradigm for multiple quality characteristics using physical programming. International Journal of Advanced Manufacturing Technology, 35 (11-12). pp. 1100-1112.

2006

Rea, H. and Corney, J.R. and Clark, D. and Taylor, N.K. (2006) Commercial and business issues in the e-sourcing and reuse of mechanical components. International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 952-958. ISSN 0268-3768

This list was generated on Sat Dec 14 10:07:15 2019 GMT.