Browse by Author or creator

2023

Taqui, Syed Noeman and C. S., Mohan and Khatoon, Bibi Ahmadi and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Mujtaba, M. A. and Ahmed, Waqar and Elfasakhany, Ashraf and Kumar, Ravinder and Pruncu, Catalin I. (2023) Sustainable adsorption method for the remediation of malachite green dye using nutraceutical industrial fenugreek seed spent. Biomass Conversion and Biorefinery, 13 (10). pp. 9119-9130. ISSN 2190-6815

2022

Leksycki, Kamil and Feldshtein, Eugene and Maruda, Radosław W. and Khanna, Navneet and Królczyk, Grzegorz M. and Pruncu, Catalin I. (2022) An insight into the effect surface morphology, processing, and lubricating conditions on tribological properties of Ti6Al4V and UHMWPE pairs. Tribology International, 170. 107504. ISSN 0301-679X

Hynes, N. Rajesh Jesudoss and Vignesh, N.J. and Jappes, J.T. Winowlin and Velu, P. Shenbaga and Barile, Claudia and Ali, Muhammad Asad and Farooq, Muhammad Umar and Pruncu, Catalin I. (2022) Effect of stacking sequence of fibre metal laminates with carbon fibre reinforced composites on mechanical attributes : numerical simulations and experimental validation. Composites Science and Technology, 221. 109303. ISSN 0266-3538

Kandavalli, Samantha Ratna and Kandavalli, Sunanda Ratna and Ruban, Rajesh S. and Lo, Chih Hung and Kumar, Ravinder and BakrElshalakany, Abou and Pruncu, Catalin (2022) Review—a conceptual analysis on ceramic materials used for dental practices : manufacturing techniques and microstructure. ECS Journal of Solid State Science and Technology, 11 (5). 053005. ISSN 2162-8777

Prabu, Arulraj Simon and Chithambaram, Venkatesan and Bennet, Maria Anto and Shanmugan, Sengottaiyan and Pruncu, Catalin Iulian and Lamberti, Luciano and Elsheikh, Ammar Hamed and Panchal, Hitesh and Janarthanan, Balasundaram (2022) Microcontroller PIC 16F877A standard based on solar cooker using PV-evacuated tubes with an extension of heat integrated energy system. Environmental Science and Pollution Research, 29. 15863–15875. ISSN 1614-7499

Chatterjee, Suman and Mahapatra, Siba Sankar and Lamberti, Luciano and Pruncu, Catalin I. (2022) Prediction of welding responses using AI approach : adaptive neuro-fuzzy inference system and genetic programming. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44 (2). 53. ISSN 1806-3691

2021

Kumar, M. Saravana and Vasumathi, M. and Begum, S. Rashia and Luminita, Scutaru Maria and Vlase, Sorin and Pruncu, Catalin I. (2021) Influence of B4C and industrial waste fly ash reinforcement particles on the micro structural characteristics and mechanical behavior of aluminium (Al–Mg–Si-T6) hybrid metal matrix composite. Journal of Materials Research and Technology, 15. pp. 1201-1216. ISSN 2238-7854

Ishfaq, Kashif and Farooq, Muhammad Umar and Pruncu, Catalin I. (2021) Reducing the geometrical machining errors incurred during die repair and maintenance through electric discharge machining (EDM). International Journal of Advanced Manufacturing Technology, 117 (9-10). pp. 3153-3168. ISSN 1433-3015

Shinde, Tarang and Pruncu, Catalin and Dhokey, Narendra B. and Parau, Anca C. and Vladescu, Alina (2021) Effect of deep cryogenic treatment on corrosion behavior of AISI H13 die steel. Materials, 14 (24). 7863. ISSN 1996-1944

Emamverdian, Ali Akbar and Sun, Yu and Cao, Chunping and Pruncu, Catalin and Wang, Yu (2021) Current failure mechanisms and treatment methods of hot forging tools (dies) - a review. Engineering Failure Analysis, 129. 105678. ISSN 1350-6307

Chenrayan, Venkatesh and Manivannan, Chandru and Velappan, Selladurai and Shahapurkar, Kiran and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Elfasakhany, Ashraf and Kumar, Ravinder and Pruncu, Catalin I. (2021) Experimental assessment on machinability performance of CNT and DLC coated HSS tools for hard turning. Diamond and Related Materials, 119. 108568. ISSN 0925-9635

Javid, Hassan and Jahanzaib, Mirza and Jawad, Muhammad and Ali, Muhammad Asad and Farooq, Muhammad Umar and Pruncu, Catalin I. and Hussain, Salman (2021) Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL) : a concept of one-step sustainable machining. International Journal of Advanced Manufacturing Technology, 117 (5-6). pp. 1915-1934. 167. ISSN 1433-3015

Palanikumar, G. and Shanmugan, S. and Chithambaram, V. and Gorjian, Shiva and Pruncu, Catalin I. and Essa, F. A. and Kabeel, A. E. and Panchal, Hitesh and Janarthanan, B. and Ebadi, Hossein and Elsheikh, Ammar H. and Selvaraju, P. (2021) Thermal investigation of a solar box-type cooker with nanocomposite phase change materials using flexible thermography. Renewable Energy, 178. pp. 260-282. ISSN 0960-1481

Hussain, Amjad and Farooq, Muhammad Umar and Habib, Muhammad Salman and Masood, Tariq and Pruncu, Catalin I. (2021) COVID-19 challenges : can industry 4.0 technologies help with business continuity? Sustainability, 13 (21). 11971. ISSN 2071-1050

Singh Mertiya, Abhimanyu and Upadhyay, Aman and Nirwan, Kaustubh and Pandit Harane, Pravin and Majdi Abdul-Rani, Ahmad and Pruncu, Catalin Iulian and Rajendra Unune, Deepak (2021) Development and investigation of an inexpensive low frequency vibration platform for enhancing the performance of electrical discharge machining process. Materials, 14 (20). 6192. ISSN 1996-1944

Antil, Parvesh and Singh, Sarbjit and Manna, Alakesh and Katal, Nitish and Pruncu, Catalin (2021) An improvement in drilling of SiCp/glass fiber-reinforced polymer matrix composites using response surface methodology and multi-objective particle swarm optimization. Polymer Composites, 42 (10). pp. 5051-5064. ISSN 0272-8397

Ishfaq, Kashif and Anjum, Irfan and Pruncu, Catalin Iulian and Amjad, Muhammad and Kumar, M. Saravana and Asad Maqsood, Muhammad (2021) Progressing towards sustainable machining of steels : a detailed review. Materials, 14 (18). 5162. ISSN 1996-1944

Bahador, Abdollah and Issariyapat, Ammarueda and Umeda, Junko and Yamanoglu, Ridvan and Pruncu, Catalin and Amrin, Astuty and Kondoh, Katsuyoshi (2021) Strength–ductility balance of powder metallurgy Ti–2Fe–2W alloy extruded at high-temperature. Journal of Materials Research and Technology, 14. pp. 677-691. ISSN 2238-7854

Rajesh Jesudoss Hynes, N and Vivek Prabhu, M and Shenbaga Velu, P and Kumar, R and Tharmaraj, R and Farooq, Muhammad Umar and Pruncu, Catalin Iulian (2021) An experimental insight of friction stir welding of dissimilar AA 6061/Mg AZ 31 B joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 236 (6-7). pp. 787-797. ISSN 2041-2975

Hussain, Amjad and Jamil, Mohsin and Farooq, Muhammad Umar and Asim, Muhammad and Rafique, Muhammad Zeeshan and Pruncu, Catalin I. (2021) Project managers' personality and project success : moderating role of external environmental factors. Sustainability, 13 (16). 9477. ISSN 2071-1050

Haq, Muhammad Ahsan ul and Hussain, Salman and Ali, Muhammad Asad and Farooq, Muhammad Umar and Mufti, Nadeem Ahmad and Pruncu, Catalin I. and Wasim, Ahmad (2021) Evaluating the effects of nano fluids based MQL milling of IN718 associated to sustainable productions. Journal of Cleaner Production, 310. 127463. ISSN 0959-6526

Barik, Lokanath and Samal, Saswat and Behera, Ajit and Rajak, Dipen Kumar and Pruncu, Catalin I. (2021) On the replacement of steel by NITINOL as coupling agent in automobile shaft. ISSS Journal of Micro and Smart Systems. ISSN 2509-7997

Jawad, Muhammad and Jahanzaib, Mirza and Ali, Muhammad Asad and Farooq, Muhammad Umar and Mufti, Nadeem Ahmad and Pruncu, Catalin I. and Hussain, Salman and Wasim, Ahmad (2021) Revealing the microstructure and mechanical attributes of pre-heated conditions for Gas Tungsten Arc Welded AISI 1045 steel joints. International Journal of Pressure Vessels and Piping, 192. 104440. ISSN 0308-0161

Kumar, Vikesh and Joshi, Manoj D. and Pruncu, Catalin and Singh, Indrasen and Hosmani, Santosh S. (2021) Microstructure and tribological response of selective laser melted AISI 316L stainless steel : the role of severe surface deformation. Journal of Materials Engineering and Performance, 30 (7). pp. 5170-5183. ISSN 1059-9495

Begum, S. Rashia and Kumar, M. Saravana and Pruncu, C. I. and Vasumathi, M. and Harikrishnan, P. (2021) Optimization and fabrication of customized scaffold using additive manufacturing to match the property of human bone. Journal of Materials Engineering and Performance, 30 (7). pp. 4848-4859. ISSN 1059-9495

Banga, Harish Kumar and Kalra, Parveen and Kumar, Raman and Singh, Sunpreet and Pruncu, Catalin I. (2021) Optimization of the cycle time of robotics resistance spot welding for automotive applications. Journal of Advanced Manufacturing and Processing, 3 (3). e10084. ISSN 2637-403X

Koubaiti, Ouadie and Fakkoussi, Said El and El-Mekkaoui, Jaouad and Moustachir, Hassan and Elkhalfi, Ahmed and Pruncu, Catalin I. (2021) The treatment of constraints due to standard boundary conditions in the context of the mixed Web-spline finite element method. Engineering Computations, 38 (7). pp. 2937-2968. ISSN 0264-4401

Jha, Nishant and Prashar, Deepak and Rashid, Mamoon and Shafiq, Mohammad and Khan, Razaullah and Pruncu, Catalin I. and Tabrez Siddiqui, Shams and Saravana Kumar, M. (2021) Deep learning approach for discovery of in silico drugs for combating COVID-19. Journal of Healthcare Engineering, 2021. 6668985. ISSN 2040-2295

Kumar, M. Saravana and Begum, S. Rashia and Pruncu, C.I. and Asl, Mehdi Shahedi (2021) Role of homogeneous distribution of SiC reinforcement on the characteristics of stir casted Al–SiC composites. Journal of Alloys and Compounds, 869. 159250. ISSN 0925-8388

Kumar, Amresh and Grover, Neelkanth and Manna, Alakesh and Kumar, Raman and Chohan, Jasgurpreet Singh and Singh, Sandeep and Singh, Sunpreet and Pruncu, Catalin Iulian (2021) Multi-objective optimization of WEDM of aluminum hybrid composites using AHP and genetic algorithm. Arabian Journal for Science and Engineering. ISSN 2191-4281

Karim, Md. Rezaul and Tariq, Juariya Binte and Morshed, Shah Murtoza and Shawon, Sabbir Hossain and Hasan, Abir and Prakash, Chander and Singh, Sunpreet and Kumar, Raman and Nirsanametla, Yadaiah and Pruncu, Catalin I. (2021) Environmental, economical and technological Analysis of MQL assisted machining of Al-Mg-Zr Alloy using PCD tool. Sustainability, 13 (13). 7321. ISSN 2071-1050

Singh, Yadvinder and Singh, Jujhar and Sharma, Shubham and Aggarwal, Vivek and Pruncu, Catalin I. (2021) Multi-objective optimization of kerf-taper and surface-roughness quality characteristics for cutting-operation on coir and carbon fibre reinforced epoxy hybrid polymeric composites during CO2-pulsed laser-cutting using RSM. Lasers in Manufacturing and Materials Processing, 8 (2). pp. 157-182. ISSN 2196-7237

Singh, Balwant and Kumar, Raman and Chohan, Jasgurpreet Singh and Singh, Sunpreet and Pruncu, Catalin Iulian and Scutaru, Maria Luminita and Muntean, Radu (2021) Investigations on melt flow rate and tensile behaviour of single, double and triple sized copper reinforced thermo-plastic composites. Materials, 14 (13). 3504. ISSN 1996-1944

Shaik, Nagoor Basha and Mantrala, Kedar Mallik and Bakthavatchalam, Balaji and Gillani, Qandeel Fatima and Rehman, M. Faisal and Behera, Ajit and Rajak, Dipen Kumar and Pruncu, Catalin I. (2021) Corrosion behavior of LENS deposited CoCrMo alloy using Bayesian regularization-based artificial neural network (BRANN). Journal of Bio- and Tribo-Corrosion, 7 (3). 116. ISSN 2198-4220

Agrawal, Sandeep and Singh, Nishant K. and Upadhyay, Rajeev Kumar and Singh, Gurminder and Singh, Yashvir and Singh, Sunpreet and Pruncu, Catalin I. (2021) Effect of different lubricating environment on the tribological performance of CNT filled glass reinforced polymer composite. Materials, 14 (11). 2965. ISSN 1996-1944

Kumar, Raman and Singh, Sehijpal and Sidhu, Ardamanbir Singh and Pruncu, Catalin I. (2021) Bibliometric analysis of specific energy consumption (SEC) in machining operations : a sustainable response. Sustainability, 13 (10). 5617. ISSN 2071-1050

Khan, Sarmad Ali and Rehman, Mudassar and Farooq, Muhammad Umar and Ali, Muhammad Asad and Naveed, Rakhshanda and Pruncu, Catalin I. and Ahmad, Waheed (2021) A detailed machinability assessment of DC53 steel for die and mold industry through wire electric discharge machining. Metals, 11 (5). 816. ISSN 2075-4701

Zheng, Jing-Hua and Pruncu, Catalin and Zhang, Kai and Zheng, Kailun and Jiang, Jun (2021) Quantifying geometrically necessary dislocation density during hot deformation in AA6082 Al alloy. Materials Science and Engineering: A, 814. 141158. ISSN 0921-5093

Guini, Fatimazahra and El Barkany, Abdellah and Jabri, Abdelouahhab and Aboussaleh, Mohamed and Pruncu, Catalin (2021) A novel approach for integrating the optimization of the lifetime and cost of manufacturing of a new product during the design phase. SAE International Journal of Materials and Manufacturing, 14 (4). ISSN 1946-3987

Oza, Ankit D. and Kumar, Abhishek and Badheka, Vishvesh and Arora, Amit and Kumar, Manoj and Pruncu, Catalin I. and Singh, Tej (2021) Improvement of the machining performance of the TW-ECDM process using magnetohydrodynamics (MHD) on quartz material. Materials, 14 (9). 2377. ISSN 1996-1944

Szczotkarz, Natalia and Mrugalski, Roland and Maruda, Radosław W. and Królczyk, Grzegorz M. and Legutko, Stanisław and Leksycki, Kamil and Dębowski, Daniel and Pruncu, Catalin I. (2021) Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication. Tribology International, 156. 106813. ISSN 0301-679X

Hopper, Christopher and Pruncu, Catalin I. and Hooper, Paul A. and Tan, Zinong and Yang, Shang-Te and Liu, Yuehan and Jiang, Jun (2021) The effects of hot forging on the preform additive manufactured 316 stainless steel parts. Micron, 143. 103026. ISSN 0968-4328

Gupta, Nitin Kumar and Somani, Nalin and Prakash, Chander and Singh, Ranjit and Walia, Arminder Singh and Singh, Sunpreet and Pruncu, Catalin Iulian (2021) Revealing the WEDM process parameters for the machining of pure and heat-treated titanium (Ti-6Al-4V) alloy. Materials, 14 (9). 2292. ISSN 1996-1944

Saxena, Ambuj and Dwivedi, Shashi Prakash and Sharma, Shubham and Srivastava, Vishal Shankar and Singh, Gursharan and Singh, Jujhar and Chattopadhyaya, Somnath and Pruncu, Catalin I. (2021) A comparative numerical analysis on the effect of welding consumables on the ballistic resistance of SMAW joints of armor steel. Applied Sciences, 11 (8). 3629. ISSN 2076-3417

Gandhi, A. Mohandass and Shanmugan, S. and Gorjian, Shiva and Pruncu, Catalin and Sivakumar, S. and Elsheikh, Ammar H. and Essa, F.A. and Omara, Z.M. and Panchal, Hitesh (2021) Performance enhancement of stepped basin solar still based on OSELM with traversal tree for higher energy adaptive control. Desalination, 502. 114926. ISSN 0011-9164

Banga, Harish Kumar and Goel, Pankaj and Kumar, Raman and Kumar, Vikas and Kalra, Parveen and Singh, Sehijpal and Singh, Sunpreet and Prakash, Chander and Pruncu, Catalin (2021) Vibration exposure and transmissibility on dentist's anatomy : a study of micro motors and air-turbines. International Journal of Environmental Research and Public Health, 18 (8). 4084. ISSN 1660-4601

Satai, Haitham A L and Abdul Zahra, Musaddak M. and Rasool, Zaid I. and Abd-Ali, Ridhab Sami and Pruncu, Catalin I. (2021) Bézier curves-based optimal trajectory design for multirotor UAVs with any-angle pathfinding algorithms. Sensors, 21 (7). 2460. ISSN 1424-8220

Thamizharasu, P. and Shanmugan, S. and Sivakumar, S. and Pruncu, Catalin I. and Kabeel, A. E. and Nagaraj, J. and Videla, Lakshmi Sarvani and Anand, K. Vijai and Lamberti, L. and Laad, Meena (2021) Revealing an OSELM based on traversal tree for higher energy adaptive control using an efficient solar box cooker. Solar Energy, 218. pp. 320-336. ISSN 0038-092X

Mohan, Prakash and Rajak, Dipen Kumar and Pruncu, Catalin I. and Behera, Ajit and Amigó-Borrás, Vicente and Elshalakany, Abou Bakr (2021) Influence of β-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys. Micron, 142. 102992. ISSN 0968-4328

Muthulakshmi, Lakshmanan and Pavithra, U. and Sivaranjani, V. and Balasubramanian, N. and Sakthivel, Kunnathur Murugesan and Pruncu, Catalin Iulian (2021) A novel Ag/carrageenan–gelatin hybrid hydrogel nanocomposite and its biological applications : preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 115. 104257. ISSN 1751-6161

Ficarella, Elisa and Minooei, Mohammad and Santoro, Lorenzo and Toma, Elisabetta and Trentadue, Bartolomeo and De Spirito, Marco and Papi, Massimiliano and Pruncu, Catalin I. and Lamberti, Luciano (2021) Visco-hyperelastic characterization of the equine immature zona pellucida. Materials, 14 (5). 1223. ISSN 1996-1944

Yakoubi, Khadija and Montassir, Soufiane and Moustabchir, Hassane and Elkhalfi, Ahmed and Pruncu, Catalin Iulian and Arbaoui, Jamal and Farooq, Muhammad Umar (2021) An extended finite element method (XFEM) study on the elastic T-stress evaluations for a notch in a pipe steel exposed to internal pressure. Mathematics, 9 (5). 507.

Behura, Arun Kumar and Kumar, Ashwini and Rajak, Dipen Kumar and Pruncu, Catalin I. and Lamberti, Luciano (2021) Towards better performances for a novel rooftop solar PV system. Solar Energy, 216. pp. 518-529. ISSN 0038-092X

Kumar, Raman and Singh, Sehijpal and Bilga, Paramjit Singh and Jatin and Singh, Jasveer and Singh, Sunpreet and Scutaru, Maria-Luminiţa and Pruncu, Catalin Iulian (2021) Revealing the benefits of Entropy weights method for multi-objective optimization in machining operations : a critical review. Journal of Materials Research and Technology, 10. pp. 1471-1492. ISSN 2238-7854

Khan, Abdul Salam and Khalid, Qazi Salman and Naeem, Khawar and Ahmad, Rafiq and Khan, Razaullah and Saleem, Waqas and Pruncu, Catalin Iulian (2021) Application of exact and multi-heuristic approaches to a sustainable closed loop supply chain network design. Sustainability (Switzerland), 13 (5). 2433. ISSN 2071-1050

Singh, Sapam Ningthemba and Chowdhury, Sohini and Nirsanametla, Yadaiah and Deepati, Anil Kumar and Prakash, Chander and Singh, Sunpreet and Wu, Linda Yongling and Zheng, Hongyu Y. and Pruncu, Catalin (2021) A comparative analysis of laser additive manufacturing of high layer thickness pure Ti and Inconel 718 alloy materials using finite element method. Materials, 14 (4). 876. ISSN 1996-1944

Alkahtani, Mohammed and Omair, Muhammad and Khalid, Qazi Salman and Hussain, Ghulam and Ahmad, Imran and Pruncu, Catalin (2021) A covid-19 supply chain management strategy based on variable production under uncertain environment conditions. International Journal of Environmental Research and Public Health, 18 (4). pp. 1-23. 1662. ISSN 1661-7827

Qazi, Mohsin Iqbal and Abas, Muhammad and Khan, Razaullah and Saleem, Waqas and Pruncu, Catalin Iulian and Omair, Muhammad (2021) Experimental investigation and multi-response optimization of machinability of AA5005H34 using composite desirability coupled with PCA. Metals, 11 (2). 235. ISSN 2075-4701

Mughal, Mohammad Pervez and Farooq, Muhammad Umar and Mumtaz, Jabir and Mia, Mozammel and Shareef, Madiha and Javed, Mahnoor and Jamil, Muhammad and Pruncu, Catalin I. (2021) Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM. Journal of the Mechanical Behavior of Biomedical Materials, 113. 104145. ISSN 1751-6161

Gul, Waheed and Shah, Syed Riaz Akbar and Khan, Afzal and Pruncu, Catalin I. (2021) Characterization of zinc oxide-urea formaldehyde nano resin and its impact on the physical performance of medium-density fiberboard. Polymers, 13 (3). 371. ISSN 2073-4360

Alkahtani, Mohammed and Khalid, Qazi Salman and Jalees, Muhammad and Omair, Muhammad and Hussain, Ghulam and Pruncu, Catalin Iulian (2021) E-agricultural supply chain management coupled with blockchain effect and cooperative strategies. Sustainability, 13 (2). 816. ISSN 2071-1050

Muthulakshmi, L and Kumar, B.Anand and Rajasekar, Aruliah and Annaraj, J. and Pruncu, Catalin I. (2021) The benefits of k-Carrageenan-gelatin hybrid composite coating on the medical grade stainless steel (SS304) used as anticorrosive barrier. Materials Chemistry and Physics, 258. 123909. ISSN 1879-3312

Kamal, Asad and Azfar, Rai Waqas and Salah, Bashir and Saleem, Waqas and Abas, Muhammad and Khan, Razaullah and Pruncu, Catalin I (2021) Quantitative analysis of sustainable use of construction materials for supply chain integration and construction industry performance through Structural Equation Modeling (SEM). Sustainability, 13 (2). 522. ISSN 2071-1050

Kumar, M. Saravana and Pruncu, C.I. and Harikrishnan, P. and Begum, S. Rashia and Vasumathi, M. (2021) Experimental investigation of in-homogeneity in particle distribution during the processing of metal matrix composites. Silicon, 14. 629–641. ISSN 1876-990X

Aherwar, Amit and Pruncu, Catalin and Mia, Mozammel (2021) Optimal design based on fabricated SiC/B4C/porcelain filled aluminium alloy matrix composite using hybrid AHP/CRITIC-COPRAS approach. Silicon. ISSN 1876-990X

2020

Kumar, Jatinder and Singh, Dilbag and Kalsi, Nirmal S. and Sharma, Shubham and Pruncu, Catalin I. and Pimenov, Danil Yu. and Rao, Kalagadda Venkateswara and Kaplonek, Wojciech (2020) Comparative study on the mechanical, tribological, morphological and structural properties of vortex casting processed, Al-SiC-Cr hybrid metal matrix composites for high strength wear-resistant applications : fabrication and characterizations. Journal of Materials Research and Technology, 9 (6). pp. 13607-13615. ISSN 2238-7854

Behera, Ajit and Rajak, Dipen Kumar and Kolahchi, Reza and Scutaru, Maria-Luminiţa and Pruncu, Catalin I. (2020) Current global scenario of sputtered deposited NiTi smart systems. Journal of Materials Research and Technology, 9 (6). pp. 14582-14598. ISSN 2238-7854

Tayal, Ashwani and Kalsi, Nirmal Singh and Gupta, Munish Kumar and Pimenov, Danil Yurievich and Sarikaya, Murat and Pruncu, Catalin I. (2020) Effectiveness improvement in manufacturing industry : trilogy study and open innovation dynamics. Journal of Open Innovation: Technology, Market and Complexity, 7 (1). 7. ISSN 2199-8531

Ishfaq, Kashif and Asad, Muhammad and Anwar, Saqib and Pruncu, Catalin I. and Saleh, Mustafa and Ahmad, Shafiq (2020) A comprehensive analysis of the effect of graphene-based dielectric for sustainable electric discharge machining of Ti-6Al-4V. Materials, 14 (1). 23. ISSN 1996-1944

Ishfaq, Kashif and Anwar, Saqib and Ali, Muhammad Asad and Raza, Muhammad Huzaifa and Farooq, Muhammad Umar and Ahmad, Shafiq and Pruncu, Catalin I. and Saleh, Mustafa and Salah, Bashir (2020) Optimization of WEDM for precise machining of novel developed Al6061-7.5% SiC squeeze casted composite. International Journal of Advanced Manufacturing Technology, 111 (7-8). pp. 2031-2049. ISSN 1433-3015

Thamizharasu, P. and Shanmugan, S. and Gorjian, Shiva and Pruncu, Catalin I. and Essa, F. A. and Panchal, Hitesh and Harish, Mooli (2020) Improvement of thermal performance of a solar box type cooker using SiO2/TiO2 nanolayer. Silicon. ISSN 1876-990X

Saleem, Waqas and Salah, Bashir and Velay, Xavier and Ahmad, Rafiq and Khan, Razaullah and Pruncu, Catalin I (2020) Numerical modeling and analysis of Ti6Al4V alloy chip for biomedical applications. Materials, 13 (22). 5236. ISSN 1996-1944

Kumar, Amresh and Grover, Neelkant and Manna, Alakesh and Chohan, Jasgurpreet Singh and Kumar, Raman and Singh, Sunpreet and Prakash, Chander and Pruncu, Catalin Iulian (2020) Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites. Advanced Composites Letters, 29. pp. 1-14. ISSN 2633-366X

Kumar, Pawan and Saini, Meenu and Dehiya, Brijnandan S. and Sindhu, Anil and Kumar, Vinod and Kumar, Ravinder and Lamberti, Luciano and Pruncu, Catalin I. and Thakur, Rajesh (2020) Comprehensive survey on nanobiomaterials for bone tissue engineering applications. Nanomaterials, 10 (10). 2019. ISSN 2079-4991

Hasnain, Saqib and Kallu, Karam Dad and Nawaz, Muhammad Haq and Abbas, Naseem and Pruncu, Catalin Iulin (2020) Dynamic response of an inverted pendulum system in water under parametric excitations for energy harvesting : a conceptual approach. Energies, 13 (19). 5215. ISSN 1996-1073

Ali, Usman and Salah, Bashir and Naeem, Khawar and Khan, Abdul Salam and Khan, Razaullah and Pruncu, Catalin Iulian and Abas, Muhammad and Khan, Saadat (2020) Improved MRO inventory management system in oil and gas company : increased service level and reduced average inventory investment. Sustainability, 12 (19). 8027. ISSN 2071-1050

Azim, Shakir and Noor, Sahar and Khalid, Qazi Salman and Khan, Aqib Mashood and Pimenov, Danil Yurievich and Ahmad, Imran and Babar, Abdur Rehman and Pruncu, Catalin I. (2020) Sustainable manufacturing and parametric analysis of mild steel grade 60 by deploying CNC milling machine and Taguchi method. Metals, 10 (10). 1303. ISSN 2075-4701