Browse by Journal or other publication

2024

Fei, Zhouxiang and West, Graeme M. and Murray, Paul and Dobie, Gordon (2024) CNN-based automated approach to crack-feature detection in steam cycle components. International Journal of Pressure Vessels and Piping, 207. 105112. ISSN 0308-0161

2023

Xiao, Xuran and Okorokov, Volodymyr and MacKenzie, Donald (2023) High cycle fatigue life assessment of notched components with induced compressive residual stress. International Journal of Pressure Vessels and Piping, 206. 105069. ISSN 0308-0161

Bao, Hongchen and Shen, Jun and Peng, Heng and Liu, Yinghua and Chen, Haofeng (2023) Elastic core concept for modified Bree problems considering in-phase and out-of-phase loading conditions. International Journal of Pressure Vessels and Piping, 202. 104913. ISSN 0308-0161

2022

Hampson, Rory and Zhang, Dayi and Gachagan, Anthony and Dobie, Gordon (2022) Modelling and characterisation ultrasonic phased array transducers for pipe inspections. International Journal of Pressure Vessels and Piping, 200. 104808. ISSN 0308-0161

Chen, Xiaohui and Liu, Yang and Zhu, Lin and Lang, Lang and Chen, Haofeng (2022) Shakedown limit of elbow pipe under coupled cyclic thermal-mechanical loading based on the LMM. International Journal of Pressure Vessels and Piping, 199. 104747. ISSN 0308-0161

Shen, Jun and Ma, Zhiyuan and Chen, Haofeng (2022) Shakedown and ratcheting analysis of Printed Circuit Heat Exchangers under multiple cyclic mechanical and thermal loads. International Journal of Pressure Vessels and Piping, 199. 104723. ISSN 0308-0161

Wang, Xiaoxiao and Ma, Zhiyuan and Chen, Haofeng and Liu, Yinghua and Shi, Duoqi and Yang, Jie (2022) Creep rupture limit analysis for engineering structures under high-temperature conditions. International Journal of Pressure Vessels and Piping, 199. 104763. ISSN 0308-0161

Li, Jianxun and Wang, Minghang and Chen, Haofeng and Wang, Pengfei and Wang, Weiqiang (2022) Investigation on characteristics of tensile damage and microstructure evolution of steel AISI 316L by nonlinear ultrasonic Lamb wave. International Journal of Pressure Vessels and Piping, 198. 104680. ISSN 0308-0161

Tutunchi, Abolfazl and Eskandarzade, Mehdi and Aghamohammadi, Reza and Masalehdan, Tahereh and Osouli-Bostanabad, Karim (2022) Risk assessment of electrofusion joints in commissioning of polyethylene natural gas networks. International Journal of Pressure Vessels and Piping, 196. 104627. ISSN 0308-0161

2021

Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2021) A comparison of stress analysis and limit analysis approaches for single and multiple nozzle combinations in cylindrical pressure vessels. International Journal of Pressure Vessels and Piping, 194 (Part B). 104563. ISSN 0308-0161

Puliyaneth, Manu and Chen, Haofeng (2021) Study on the effect of welding residual stress on creep-cyclic plasticity behaviour. International Journal of Pressure Vessels and Piping, 193. 104444. ISSN 0308-0161

Bao, Hongchen and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2021) Shakedown analysis of modified Bree problems involving thermal membrane stress and generalized loading conditions. International Journal of Pressure Vessels and Piping, 192. 104432. ISSN 0308-0161

Peng, Heng and Liu, Yinghua and Chen, Haofeng (2021) Creep rupture assessment of cyclically heated 3D pressure pipelines with volumetric defects using a direct numerical approach. International Journal of Pressure Vessels and Piping, 192. 104387. ISSN 0308-0161

Jawad, Muhammad and Jahanzaib, Mirza and Ali, Muhammad Asad and Farooq, Muhammad Umar and Mufti, Nadeem Ahmad and Pruncu, Catalin I. and Hussain, Salman and Wasim, Ahmad (2021) Revealing the microstructure and mechanical attributes of pre-heated conditions for Gas Tungsten Arc Welded AISI 1045 steel joints. International Journal of Pressure Vessels and Piping, 192. 104440. ISSN 0308-0161

Javadi, Yashar and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Mineo, Carmelo and Pierce, Stephen G. and Gachagan, Anthony (2021) High-temperature in-process inspection followed by 96-h robotic inspection of intentionally manufactured hydrogen crack in multi-pass robotic welding. International Journal of Pressure Vessels and Piping, 189. 104288. ISSN 0308-0161

2019

Peng, Heng and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2019) Shakedown analysis of a torispherical head with a piping nozzle under combined loads by the stress compensation method. International Journal of Pressure Vessels and Piping, 172. pp. 107-118. ISSN 0308-0161

Zheng, Xiaotao and Chen, Haofeng and Ma, Zhiyuan and Xuan, Fuzhen (2019) A novel fatigue assessment approach by Direct Steady Cycle Analysis (DSCA) considering the temperature-dependent strain hardening effect. International Journal of Pressure Vessels and Piping, 170. pp. 66-72. ISSN 0308-0161

2018

Abid, Muhammad and Nash, David Hugh and Javed, Saif and Wajid, Hafiz Abdul (2018) Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading – FEA study. International Journal of Pressure Vessels and Piping, 168. pp. 166-173. ISSN 0308-0161

Puliyaneth, Manu and Barbera, Daniele and Chen, Haofeng and Xuan, Fuzhen (2018) Study of ratchet limit and cyclic response of welded pipe. International Journal of Pressure Vessels and Piping, 168. pp. 49-58. ISSN 0308-0161

Elrefaey, Ahmed and Javadi, Yashar and Francis, John A. and Callaghan, Mark D. and Leonard, Andrew J. (2018) Evolution of microstructure and toughness in 2.25Cr-1Mo steel welds. International Journal of Pressure Vessels and Piping, 165. pp. 20-28. ISSN 0308-0161

Gong, Jian-Guo and Niu, Tian-Ye and Chen, Haofeng and Xuan, Fu-Zhen (2018) Shakedown analysis of pressure pipeline with an oblique nozzle at elevated temperatures using the Linear Matching Method. International Journal of Pressure Vessels and Piping, 159. pp. 55-66. ISSN 0308-0161

2017

Wimpory, Robert Charles and Martins, René V. and Hoffman, Michael and Kornmeier, Joana Rebelo and Moturu, Shanmukha and Ohms, Carsten (2017) A complete reassessment of standard residual stress uncertainty analyses using neutron diffraction emphasizing the influence of grain size. International Journal of Pressure Vessels and Piping. ISSN 0308-0161

Javadi, Y. and Smith, M.C. and Abburi Venkata, K. and Naveed, N. and Forsey, A.N. and Francis, J.A. and Ainsworth, R.A. and Truman, C.E. and Smith, D.J. and Hosseinzadeh, F. and Gungor, S. and Bouchard, P.J. and Dey, H.C. and Bhaduri, A.K. and Mahadevan, S. (2017) Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154. pp. 41-57. ISSN 0308-0161

Javadi, Y. and Walsh, J.N. and Elrefaey, A. and Roy, M.J. and Francis, J.A. (2017) Measurement of residual stresses induced by sequential weld buttering and cladding operations involving a 2.25Cr-1Mo substrate material. International Journal of Pressure Vessels and Piping, 154. pp. 58-74. ISSN 0308-0161

2016

Mehmanparast, Ali and Davies, Catrin M. and Dean, David W. and Nikbin, Kamran (2016) Effects of plastic pre-straining level on the creep deformation, crack initiation and growth behaviour of 316H stainless steel. International Journal of Pressure Vessels and Piping, 141. pp. 1-10. ISSN 0308-0161

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-140. pp. 159-172. ISSN 0308-0161

Abid, Muhammad and Khan, Ayesha and Nash, David Hugh and Hussain, Masroor and Wajid, Hafiz Abdul (2016) Optimized bolt tightening strategies for gasketed flanged pipe joints of different sizes. International Journal of Pressure Vessels and Piping, 139-140. pp. 22-27. ISSN 0308-0161

Benghalia, G. and Wood, J. (2016) Material and residual stress considerations associated with the autofrettage of weld clad components. International Journal of Pressure Vessels and Piping, 139-140. pp. 146-158. ISSN 0308-0161

2015

Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2015) Comparison of the linear matching method to Rolls Royce's hierarchical finite element framework for ratchet limit analysis. International Journal of Pressure Vessels and Piping, 125. pp. 13-22. ISSN 0308-0161

2014

Javadi, Yashar and Pirzaman, Hamed Salimi and Raeisi, Mohammadreza Hadizadeh and Najafabadi, Mehdi Ahmadi (2014) Ultrasonic stress evaluation through thickness of a stainless steel pressure vessel. International Journal of Pressure Vessels and Piping, 123-124. pp. 111-120. ISSN 0308-0161

Ure, James and Chen, Haofeng and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 1 : Software development. International Journal of Pressure Vessels and Piping, 120-121. pp. 141-151. ISSN 0308-0161

Chen, Haofeng and Ure, James and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 2 : Application and verification. International Journal of Pressure Vessels and Piping, 120-121. pp. 152-161. ISSN 0308-0161

Bradford, R.A.W. and Ure, James and Chen, Haofeng (2014) The Bree problem with different yield stresses on-load and off-load and application to creep ratcheting. International Journal of Pressure Vessels and Piping, 113. ISSN 0308-0161

2013

Dempster, William and Elmayyah, Wael (2013) Two phase discharge flow prediction in safety valves. International Journal of Pressure Vessels and Piping, 110. pp. 61-65. ISSN 0308-0161

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 110. p. 1. ISSN 0308-0161

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

Zhou, Xingguo and Pan, Wenke and MacKenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109. 2–6. ISSN 0308-0161

Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 108-109. p. 1. ISSN 0308-0161

Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161

Muscat, Martin and Camilleri, Duncan (2013) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. International Journal of Pressure Vessels and Piping, 108-109. pp. 61-66. ISSN 0308-0161

Boyle, James (2013) A re-assessment of elastic follow-up in high temperature piping. International Journal of Pressure Vessels and Piping, 108-109. pp. 7-12. ISSN 0308-0161

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Li, Hongjun and Wood, James and McCormack, Ross and Hamilton, Robert (2013) Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure. International Journal of Pressure Vessels and Piping, 101. pp. 154-160. ISSN 0308-0161

2012

Li, Chun-Qing and Yang, Shangtong (2012) Stress intensity factors for high aspect ratio semi-elliptical internal surface cracks in pipes. International Journal of Pressure Vessels and Piping, 96-97. pp. 13-23. ISSN 0308-0161

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

2011

Boyle, James (2011) The behavior of structures based on the characteristic strain model of creep. International Journal of Pressure Vessels and Piping, 88 (11-12). pp. 473-481. ISSN 0308-0161

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James (2011) On the shakedown analysis of welded pipes. International Journal of Pressure Vessels and Piping, 88 (8-9). pp. 301-310. ISSN 0308-0161

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

2010

Neilson, Robbie and Wood, J. and Hamilton, R. and Li, H. (2010) A comparison of plastic collapse and limit loads for single mitred pipe bends under in-plane bending. International Journal of Pressure Vessels and Piping, 87 (10). pp. 550-558. ISSN 0308-0161

2009

Chen, Haofeng and Ponter, Alan R.S. (2009) Structural integrity assessment of superheater outlet penetration tubeplate. International Journal of Pressure Vessels and Piping, 86 (7). pp. 412-419. ISSN 0308-0161

Williams, J.G. and Anley, R.E. and Nash, D.H. and Gray, T.G.F. (2009) Analysis of externally loaded bolted joints : analytical, computational and experimental study. International Journal of Pressure Vessels and Piping, 86 (7). pp. 420-427. ISSN 0308-0161

2008

Wood, J. (2008) A review of literature for the structural assessment of mitred bends. International Journal of Pressure Vessels and Piping, 85 (5). pp. 275-294. ISSN 0308-0161

Sattari-Far, I. and Javadi, Y. (2008) Influence of welding sequence on welding distortions in pipes. International Journal of Pressure Vessels and Piping, 85 (4). pp. 265-274. ISSN 0308-0161

2006

Li, Hongjun and Mackenzie, Donald (2006) Characterising plastic collapse of pipe bend structures. International Journal of Pressure Vessels and Piping, 83 (2). pp. 85-95. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 123-135. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 136-147. ISSN 0308-0161

2005

Li, H. and Mackenzie, D. (2005) Characterising gross plastic deformation in design by analysis. International Journal of Pressure Vessels and Piping, 82 (10). pp. 777-786. ISSN 0308-0161

Robertson, A.C. and Li, H. and Mackenzie, D. (2005) Plastic collapse of pipe bends under combined internal pressure and in-plane bending. International Journal of Pressure Vessels and Piping, 82 (5). pp. 407-416. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. shakedown, reverse plasticity and ratchetting. International Journal of Pressure Vessels and Piping, 82 (2). pp. 85-94. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: creep relaxation and reverse plasticity. International Journal of Pressure Vessels and Piping, 82 (2). pp. 95-104. ISSN 0308-0161

2004

Spence, J. and Nash, D.H. (2004) Milestones in pressure vessel technology. International Journal of Pressure Vessels and Piping, 81 (2). pp. 89-118. ISSN 0308-0161

Lubis, A. and Boyle, J.T. (2004) The pressure reduction effect in smooth piping elbows - revisited. International Journal of Pressure Vessels and Piping, 81 (2). pp. 119-125. ISSN 0308-0161

Abid, M. and Nash, D.H. (2004) A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions. International Journal of Pressure Vessels and Piping, 81 (1). pp. 67-74. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2004) Integrity assessment for a tubeplate using linear matching method. International Journal of Pressure Vessels and Piping, 81. pp. 327-336. ISSN 0308-0161

2003

Muscat, Martin and Mackenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161

Abid, Muhammad and Nash, David (2003) Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions. International Journal of Pressure Vessels and Piping, 80 (12). pp. 831-841. ISSN 0308-0161

Chen, Haofeng and Engelhardt, M.J. and Ponter, Alan R.S. (2003) Linear matching method for creep rupture assessment. International Journal of Pressure Vessels and Piping, 80. pp. 213-220. ISSN 0308-0161

2001

Chen, Haofeng and Ponter, Alan R.S. (2001) Shakedown and limit analyses for 3-D structures using the linear matching method. International Journal of Pressure Vessels and Piping, 78. pp. 443-451. ISSN 0308-0161

Nash, D.H. and Spence, J. and Tooth, A.S. and Abid, Muhammad and Power, D.J. (2001) A parametric study of metal-to-metal full face taper-hub flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 791-797. ISSN 0308-0161

2000

Banks, W.M. and Nash, D.H. and Flaherty, A.E. and Fok, W.C. and Tooth, A.S. (2000) A simplified design approach to determine the maximum strains in a grp vessel supported on twin saddles. International Journal of Pressure Vessels and Piping, 77 (13). pp. 837-842. ISSN 0308-0161

Nash, David and Abid, Muhammad (2000) Combined external load tests for standard and compact flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 799-806. ISSN 0308-0161

Chen, Haofeng and Shu, D.W. (2000) Lower and upper bound limit analyses for pipeline with multi-slots of various configurations. International Journal of Pressure Vessels and Piping, 77 (1). pp. 17-25. ISSN 0308-0161

1999

Chen, Haofeng and Shu, D.W. (1999) A numerical method for lower bound limit analysis of 3-D structures with multi-loading systems. International Journal of Pressure Vessels and Piping, 76 (2). pp. 105-112. ISSN 0308-0161

1998

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) Numerical analysis of limit load and reference stress of defective pipelines under multi-loading system. International Journal of Pressure Vessels and Piping, 75 (2). pp. 105-114. ISSN 0308-0161

1997

Chen, Haofeng and Cen, Z.Z. and Xu, B.Y. and Zhan, S.G. (1997) A numerical method for reference stress in the evaluation of structure integrity. International Journal of Pressure Vessels and Piping, 71 (1). pp. 47-53. ISSN 0308-0161

1986

Tooth, Alwyn and Nash, David (1986) The use of a microcomputer in the design of cylindrical pressure-vessels. International Journal of Pressure Vessels and Piping, 24 (1). pp. 1-12. ISSN 0308-0161