Picture map of Europe with pins indicating European capital cities

Open Access research with a European policy impact...

The Strathprints institutional repository is a digital archive of University of Strathclyde's Open Access research outputs. Strathprints provides access to thousands of Open Access research papers by Strathclyde researchers, including by researchers from the European Policies Research Centre (EPRC).

EPRC is a leading institute in Europe for comparative research on public policy, with a particular focus on regional development policies. Spanning 30 European countries, EPRC research programmes have a strong emphasis on applied research and knowledge exchange, including the provision of policy advice to EU institutions and national and sub-national government authorities throughout Europe.

Explore research outputs by the European Policies Research Centre...

Browse by Journal or other publication

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 21.

Liu, Xiaoyu and Zhao, Shiping and Qin, Yi and Wang, Chunju and Wan Nawang, Wan Adlan (2016) Size effect on the springback of CuZn37 brass foils in tension and micro W-bending. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975 (In Press)

Elkaseer, AM and Dimov, SS and Pham, DT and Popov, KP and Olejnik, L and Rosochowski, A (2016) Material microstructure effects in micro-endmilling of Cu99.9E. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Kakaie-Lafdaini, Mohammad Hadi and Ghadiri-Zahrani, Ismaeil and Galloway, Alexander (2015) Optimization study of weld geometry in the tandem submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (6). pp. 1068-1077. ISSN 2041-2975

Zeng, Quanren and Liu, Geng and Liu, Lan and Qin, Yi (2015) Investigation into grindability of a superalloy and effects of grinding parameters on its surface integrity. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (2). pp. 238-250. ISSN 2041-2975

Campbell, Stuart and Ley, F.H. and Galloway, Alexander and McPherson, Norman (2015) Artificial neural network optimisation of shielding gas flow rate in gas metal arc welding subjected to cross drafts when using alternating shielding gases. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (1). pp. 122-129. ISSN 2041-2975

Zhou, Xingguo and Mackenzie, Donald and Pan, Wenke (2015) A new distributed cooling method for mitigating residual stress in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Rashid, W.B. and Goel, S. and Luo, X. and Ritchie, J.M. (2013) An experimental investigation for the improvement of attainable surface roughness during hard turning process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (2). pp. 338-342. ISSN 2041-2975

Abid, Muhammad and Parvez, Shahid and Nash, David and Fawad, Hassan (2012) 3 Dimensional simulation of stationary gas tungsten arc welding of L-shape, V-shape and open-corner joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1354-1368. ISSN 2041-2975

Feng, Jiling and Qin, Yi and Raghavan, Rejin and Michler, J and Almandoz, E. and Fuentes, G.G. (2012) New technique for determining the critical loads of a thin coating on a tool–steel substrate by considering the initiation of cracks in the coating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (7). pp. 1205-1212. ISSN 2041-2975

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2012) Evaluation of gas metal arc welding with alterating shielding gases for use on AA6082T6. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226. pp. 992-1000. ISSN 2041-2975

Sun, J. and Luo, Xichun and Ritchie, J. and Hrncir, T. (2012) A predictive divergence compensation approach for the fabrication of three-dimensional microstructures using focused ion beam machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (2). pp. 229-238. ISSN 2041-2975

Antony, J. and Coleman, S. and Montgomery, D. C. and Anderson, M. J. and Silvestrini, R. T. (2011) Design of experiments for non-manufacturing processes : benefits, challenges and some examples. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (11). pp. 2078-2087. ISSN 2041-2975

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2011) Techno-economic evaluation on the effects of alternating shielding gases for advanced joining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (10). pp. 1863-1872. ISSN 2041-2975

Rees, Andrew and Dimov, Stefan and Minev, Roussi and Lalev, Georgi and Rosochowski, Andrzej and Olejnik, Lech (2011) The effect of material grain structure on the surface integrity of components processed by microwire electrical discharge machining (μWEDM). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1647-1656. ISSN 2041-2975

Chang, Wenlong and Luo, X-C and Ritchie, J. M. and Sun, J.-N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 2041-2975

Bititci, U. and Mendibil, Kepa and Maguire, Catherine (2010) High value manufacturing : a case study in transformation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1599-1614. ISSN 2041-2975

Li, H. and Mackenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 2041-2975

Acharya, U. H. and Gijo, E. V. and Antony, J. (2010) Quality engineering of a traction alternator by robust design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (2). pp. 297-304. ISSN 2041-2975

Kumar, Maneesh and Antony, J. (2009) Multiple case-study analysis of quality management practices within UK Six Sigma and non-Six Sigma manufacturing small- and medium-sized enterprises. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233. pp. 925-934. ISSN 2041-2975

Coates, G. and Duffy, A.H.B. and Hills, W. and Whitfield, I. (2007) A preliminary approach for modelling and planning the composition of engineering project teams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (7). pp. 1255-1265. ISSN 2041-2975

Yan, X.T. and Borg, J. and Juster, N.P. (2001) Concurrent modelling of components and realization systems to support proactive design for manufacture/assembly. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (8). pp. 1135-1141. ISSN 2041-2975

This list was generated on Fri Sep 22 18:21:25 2017 BST.