Browse by Journal or other publication

2022

Dai, Yanwei and Qin, Fei and Liu, Yinghua and Chen, Haofeng (2022) Influences of material mismatch on interface crack tip field in three layered creeping materials. Engineering Failure Analysis, 140. 106523. ISSN 1350-6307

Ermakova, Anna and Ganguly, Supriyo and Razavi, Javad and Berto, Filippo and Mehmanparast, Ali (2022) Corrosion-fatigue crack growth behaviour of wire arc additively manufactured ER100S-1 steel specimens. Engineering Failure Analysis, 138. 106362. ISSN 1350-6307

2021

Emamverdian, Ali Akbar and Sun, Yu and Cao, Chunping and Pruncu, Catalin and Wang, Yu (2021) Current failure mechanisms and treatment methods of hot forging tools (dies) - a review. Engineering Failure Analysis, 129. 105678. ISSN 1350-6307

2020

Wang, Weigang and Yang, Wei and Li, Chun-Qing and Yang, Shangtong (2020) A new method to determine elasto-plastic j-integral for steel pipes with longitudinal semi-elliptical surface cracks. Engineering Failure Analysis, 118. 104915. ISSN 1350-6307

Mehmanparast, A. and Yatomi, M. and Biglari, F. and Maleki, S. and Nikbin, K. (2020) Experimental and numerical investigation of the weld geometry effects on Type IV cracking behaviour in P91 steel. Engineering Failure Analysis, 117. 104826. ISSN 1350-6307

Lyons, C.J. and Race, J.M. and Chang, E. and Cosham, A. and Wetenhall, B. and Barnett, J. (2020) Validation of the NG-18 equations for thick walled pipelines. Engineering Failure Analysis, 112. 104494. ISSN 1350-6307

2019

Chen, Xiaohui and Fang, Shuang and Chen, Haofeng (2019) Stress concentration factor and fatigue analysis of a lateral nozzle with local wall thinning. Engineering Failure Analysis, 105. pp. 289-304. ISSN 1350-6307

Touliatou, Dimitra and Wheel, Marcus A. (2019) Experimental and numerical analysis of size effects on stress intensity in anisotropic porous materials. Engineering Failure Analysis. ISSN 1350-6307 (In Press)

2016

Saunders, E.A. and Chapman, T.P. and Walker, A.R.M. and Lindley, T.C. and Chater, R.J. and Vorontsov, V.A. and Rugg, D. and Dye, D. (2016) Understanding the "blue spot" : sodium chloride hot salt stress-corrosion cracking in titanium-6246 during fatigue testing at low pressure. Engineering Failure Analysis, 61. pp. 2-20. ISSN 1350-6307

2013

Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307

2009

Alexander, L.A. and Wood, J. (2009) A study of the low-cycle fatigue failure of a galvanised steel lighting column. Engineering Failure Analysis, 16 (7). pp. 2153-2162. ISSN 1350-6307

2005

Nash, D.H. and Dempster, I. (2005) Modelling the sources of cracking of aircraft compressor vanes rings. Engineering Failure Analysis, 12 (5). pp. 699-710. ISSN 1350-6307