Browse by Author or creator

2024

Hicks, Calum and Tamimi, Saeed and Sivaswamy, Giribaskar and Pimentel, Misael and Mckegney, Scott and Fitzpatrick, Stephen (2024) Hybrid manufacturing approach for landing gear applications : WAAM Ti–6Al–4V on forged Ti–5Al–5Mo–5V–3Cr. Journal of Materials Research and Technology, 30. pp. 6596-6608. ISSN 2238-7854

2023

Zimermann, Rastislav and Mohseni, Ehsan and Foster, Euan A. and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K.W. and Macleod, Charles N. and Lines, David and Silva, Misael Pimentel Espirindio E. and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Rizwan, Muhammad Khalid and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of metal additive manufactured components at build using ultrasound and eddy-current approaches. Journal of Manufacturing Processes, 107. pp. 549-558. ISSN 1526-6125

Leonidas, Emilios and Hobbs, Matthew J. and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fisk, Callum and Fitzpatrick, Stephen and Willmott, Jon R. (2023) InAsSb photodiode fibre otic thermometry for high-speed, near-ambient temperature measurements. Sensors, 23 (23). 9514. ISSN 1424-8220

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Wathavana Vithanage, Randika Kosala and MacLeod, Charles Norman and Pierce, Gareth and Lines, David and Pimentel Espirindio E Silva, Misael and Fitzpatrick, Stephen and Rizwan, Muhammad Khalid and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Zimermann, Rastislav and Rizwan, Mohammad Khalid and Loukas, Charalampos and Vasilev, Momchil and Mohseni, Ehsan and Vithanage, Randika K.W. and MacLeod, Charles N. and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2023) Dry-coupled ultrasound phased array inspection of as-built complex geometry metal additive manufactured components. In: 31st ASNT Research symposium, 2023-06-20 - 2023-06-23, Greater Columbus Convention Centre.

Mohseni, Ehsan and MacLeod, Charles N. and Pierce, S. Gareth and Vithanage, Randika K. W. and Zimermann, Rastislav and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Gachagan, Anthony and Williams, Stewart and Ding, Jialuo (2023) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

2022

Mohseni, Ehsan and Zimermann, Rastislav and Vithanage, Randika K. W. and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and MacDonald, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Gachagan, A. and Williams, Stewart and Ding, Jialuo (2022) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and Macleod, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2022) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Leonidas, Emilios and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fitzpatrick, Stephen and Willmott, Jon R. (2022) A comparative review of thermocouple and infrared radiation temperature measurement methods during the machining of metals. Sensors, 22 (13). 4693. ISSN 1424-8220

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and MacLeod, Charles N. and Lines, David and Javadi, Yashar and Espirindio E Silva, Misael Pimentel and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2022) Collaborative robotic Wire + Arc Additive Manufacture and sensor-enabled in-process ultrasonic Non-Destructive Evaluation. Sensors, 22 (11). 4203. ISSN 1424-8220

2021

Hilton, Kareema and Fitzpatrick, Stephen and Violatos, Ioannis and McEwan, Chris and Mehnen, Jorn (2021) A statistics based Digital Twin for the combined consideration of heat treatment and machining for predicting distortion. Procedia CIRP, 101. pp. 93-97. ISSN 2212-8271

2018

Foster, Jim and Cullen, Crawford and Fitzpatrick, Stephen and Payne, Grant and Hall, Liza and Marashi, James (2018) Remanufacture of hot forging tools and dies using Laser Metal Deposition with powder and a hard-facing alloy Stellite 21®. Journal of Remanufacturing. ISSN 2210-4690

Fitzpatrick, Stephen (2018) Guest Editorial : Can additive manufacturing breathe new life into aging assets? Journal of Petroleum Technology, 70 (1). pp. 14-15. ISSN 0149-2136

2017

Reimer, Andreas and Fitzpatrick, Stephen and Luo, Xichun and Zhao, Jie; Markopoulos, Angelos P. and Vosniakos, George-Christopher, eds. (2017) Numerical investigation of mechanical induced stress during precision end milling hardened tool steel. In: Precision Machining IX. Solid State Phenomena . Trans Tech Publications Ltd, GRC, pp. 362-369. ISBN 9783035731996

Rahimi, Salah and Laidlaw, Stuart and Fitzpatrick, Stephen (2017) Material gains : aerospace and AFRC lead the way in controlling residual stress. Production Engineering Solutions, 21 (252). pp. 41-42. ISSN 1460-3926

Reimer, Andreas and Fitzpatrick, Stephen and Luo, Xichun (2017) A full factorial numerical investigation and validation of precision end milling process for hardened tool steel. In: 17th euspen International Conference & Exhibition, 2017-05-29 - 2017-06-02, Hanover Congress Centre.

2016

Wilson, Michael and Payne, Grant and Ahmad, Abdul and Fitzpatrick, Stephen and Ion, William and Xirouchakis, Paul (2016) Investigating relationships between laser metal deposition deployment conditions and material microstructural evolution. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.

Payne, Grant and Ahmad, Abdul and Fitzpatrick, Stephen and Xirouchakis, Paul and Ion, William and Wilson, Michael (2016) Remanufacturing H13 steel moulds and dies using laser metal deposition. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.

McIntosh, Lynne and Falsafi, Javad and Fitzpatrick, Stephen and Blackwell, Paul L. (2016) Wear behaviour of laser cladded Ni-based WC composite coating for Inconel hot extrusion : practical challenges and effectiveness. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.