Browse by Author or creator

2022

Rasheed, Aamir and Ion, William (2022) A novel approach towards sustainability assessment in manufacturing and stakeholder's role. Sustainability, 14 (6). 3221. ISSN 2071-1050

Campbell, A. and Murray, P. and Yakushina, E. and Borocco, A. and Dokladal, P. and Decencière, P. and Ion, W. and Marshall, S. (2022) Automated analysis of platelet microstructures using a feature length orientation space. Journal of Materials Science, 57 (2). pp. 1448-1461. ISSN 0022-2461

2021

Strazzullo, Gennaro and Ion, William J. and MacBryde, Jillian (2021) An investigation of the translational asset : a proposed classification. The Journal of the Knowledge Economy, 13 (4). pp. 3123-3149. ISSN 1868-7873

Gani, Adel and Ion, William and Yang, Erfu (2021) Optimisation of cutting parameters and surface deformation during thin steel sheets plasma processing using Taguchi approach. Advances in Mechanical Engineering, 13 (7). ISSN 1687-8140

Gani, Adel and Ion, William and Yang, Erfu (2021) Experimental investigation of plasma cutting two separate thin steel sheets simultaneously and parameters optimisation using Taguchi approach. Journal of Manufacturing Processes, 64. pp. 1013-1023. ISSN 1526-6125

2020

Olisah, Moses Chijioke and Nwankpa, Chigozie and Whitfield, Ian and Ion, William (2020) The exploration of collaborative supply chain factors in the oil and gas industry. In: BAM 2020: 34th Annual Conference of the British Academy of Management, 2020-09-02 - 2020-09-04, Cloud.

2019

Anderson, Pauline and Hawthorne, Margaret and Findlay, Patricia and Ion, William and Morrison, Douglas and Morrison, Douglas Hamilton and Millar, Stuart and Viza, Evi (2019) Developing the Skills System for the National Manufacturing Institute for Scotland (NMIS). National Manufacturing Institute for Scotland (NMIS), Glasgow.

2018

Siddiqi, Muftooh U. R. and Ijomah, Winifred L. and Dobie, Gordon I. and Hafeez, Muthair and Pierce, S. Gareth and Ion, William and Mineo, Carmelo and MacLeod, Charles N. (2018) Low cost three-dimensional virtual model construction for remanufacturing industry. Journal of Remanufacturing. ISSN 2210-4690

Hatcher, G. and Ion, W. and MacLachlan, R. and Marlow, M. and Simpson, B. and Wilson, N. and Wodehouse, A. (2018) Using linkography to compare creative methods for group ideation. Design Studies, 58. pp. 127-152. ISSN 0142-694X

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Wodehouse, Andrew and Simpson, Barbara and Marlow, Marion; Luria, Sarah R. and Baer, John and Kaufman, James C., eds. (2018) Applied humour in creative product design. In: Creativity and Humour. Explorations in Creativity Research . Elsevier, London, pp. 157-182. ISBN 9780128138021

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2018) Industrial validation of strain in cold roll forming of UHSS. Procedia Manufacturing, 15. pp. 788-795. ISSN 2351-9789

Singo, Nthambe and Coles, John and Rosochowska, Malgorzata and Lalvani, Himanshu and Hernandez, Jose and Ion, William (2018) Optimising mechanical properties of hot forged nickel superalloy 625 components. AIP Conference Proceedings, 1960 (1). 110010. ISSN 1551-7616

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Sheridan, Marion and Simpson, Barbara and Wodehouse, Andrew (2018) Evolving improvised ideation from humour constructs : a new method for collaborative divergence. Creativity and Innovation Management, 27 (1). pp. 91-101. ISSN 0963-1690

Campbell, Andrew and Murray, Paul and Yakushina, Evgenia and Marshall, Stephen and Ion, William (2018) New methods for automatic quantification of microstructural features using digital image processing. Materials & Design, 141. pp. 395-406. ISSN 0264-1275

2017

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2017) Validation of a finite element model of the cold roll forming process on the basis of 3D geometric accuracy. Procedia Engineering, 207. pp. 1278-1283. ISSN 1877-7058

Siddiqi, Muftooh UR and Ijomah, Winifred L. and Dobie, Gordon I. and Hafeez, Muthair and Pierce, S. Gareth and Ion, William and Mineo, Carmelo and MacLeod, Charles N. (2017) Low cost three-dimensional virtual model construction for remanufacturing industry. In: International Conference on Remanufacturing, 2017-10-24 - 2017-10-26.

Staiano, A. and Ion, W. and O'Hare, L. and Zuelli, N. (2017) Protective coatings for ceramic superplastic forming dies : an initial study on protective coating performance. Materialwissenschaft und Werkstofftechnik, 48 (10). pp. 1009-1016. ISSN 0933-5137

Appleby, Andrew and Conway, Alastair and Ion, William (2017) A novel methodology for in-process monitoring of flow forming. AIP Conference Proceedings, 1896 (1). 080022. ISSN 1551-7616

Brisco, Ross and Howell, Bryan and Whitfield, Robert and Thomson, Avril and Evans, Dorothy and Ion, William (2017) Workshop session : collaborative design education. In: 21st International Conference on Engineering Design (ICED17), 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Onyeiwu, Chimaeze and Yang, Erfu and Rodden, Tony and Yan, Xiu-Tian and Zante, Remi C and Ion, William (2017) In-process monitoring and quality control of hot forging processes towards Industry 4.0. In: Industrial Systems in the Digital Age Conference 2017, 2017-06-20 - 2017-06-21, University of Glasgow.

Campbell, A. and Murray, P. and Yakushina, E. and Marshall, S. and Ion, W. (2017) Automated microstructural analysis of titanium alloys using digital image processing. IOP Conference Series: Materials Science and Engineering, 179 (1). 012011. ISSN 1757-899X

2016

Hatcher, G. and Ion, W. and MacLachlan, R. and Wodehouse, A. and Simpson, B. and Sheridan, M. (2016) Design ideation through improvised comedy processes. In: 4th International Conference on Design Creativity (ICDC 2016), 2016-11-02 - 2016-11-04, Georgia.

Duffy, Alex and Whitfield, Ian and Ion, Bill and Vuletic, Tijana (2016) Smart Products Through-Life : Research Roadmap. University of Strathclyde Publishing, Glasgow.

Tsang, Kwun Sing and Ion, William and English, Martin (2016) Investigation into the numerical model behaviour of Belleville washers in cold roll forming. Key Engineering Materials, 716. pp. 719-727. ISSN 1013-9826

Wilson, Michael and Payne, Grant and Ahmad, Abdul and Fitzpatrick, Stephen and Ion, William and Xirouchakis, Paul (2016) Investigating relationships between laser metal deposition deployment conditions and material microstructural evolution. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.

Payne, Grant and Ahmad, Abdul and Fitzpatrick, Stephen and Xirouchakis, Paul and Ion, William and Wilson, Michael (2016) Remanufacturing H13 steel moulds and dies using laser metal deposition. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.

Staiano, Andrea and Ion, William and O'Hare, Lynne and Zuelli, Nicola (2016) Protective coatings for superplastic forming ceramic dies : an initial study on protective coatings performance. In: European Conference on Superplastic Forming, 2016-09-07 - 2016-09-09, Cite de l'Espace.

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Wodehouse, Andrew and Sheridan, Marion and Simpson, Barbara (2016) Humour processes for creative engineering design. In: 14th International Design Conference (Design), 2016-05-16 - 2016-05-19, Hotel Croatia Cavtat.

2015

Staiano, A. and Ion, W. and O'Hare, L. (2015) Monitoring of ceramic die condition under hot forming processes. In: The 23rd International Conference on CAPE, 2015-11-03. (In Press)

2014

Staiano, Andrea and Ion, William and O'Hare, Lynne (2014) Protective coatings for superplastic forming dies : opportunities for thermal spray technology. In: University of Strathclyde Research Presentation Day, 2014-08-21, University of Strathclyde.

Staiano, Andrea and Ion, William and O'Hare, Lynne; (2014) Thermal sprayed protective coatings for superplastic forming ceramic dies : a monitoring system of die condition. In: ITSC 2014 - International Thermal Spray Conference & Exposition. DVS Media, Düsseldorf, pp. 301-305. ISBN 9783871555749

Staiano, Andrea and Ion, William and O'Hare, Lynne (2014) Protective coatings for superplastic forming ceramic dies : opportunities for thermal spray technology. In: International Thermal Spray Conference, 2014-05-21 - 2014-05-23.

2013

Staiano, Andrea and Ion, William and O'Hare, Lynne (2013) Protective coatings for superplastic forming ceramic dies. In: University of Strathclyde Research Presentation Day, 2014-08-21, University of Strathclyde.

Anderson, Magnus and McGuire, Kenny and Zante, Remi Christophe and Ion, William and Rosochowski, Andrzej and Brooks, Jeffery (2013) Identifying the dominant failure mode in the hot extrusion tooling used to forge nickel based superalloy. Journal of Materials Processing Technology, 213 (1). 111–119. ISSN 0924-0136

Conway, Alastair and Ion, William (2013) Enhancing the design dialogue : an architecture to document engineering design activities. Journal of Engineering Design, 24 (2). pp. 140-164. ISSN 1466-1837

2012

Wodehouse, Andrew and Ion, William (2012) Augmenting the 6-3-5 method with design information. Research in Engineering Design, 23 (1). pp. 5-15. ISSN 0934-9839

2011

Wodehouse, Andrew and Ion, William and Mair, Gordon; Kovacevic, Ahmed and Ion, William and McMahon, Christopher, eds. (2011) Sports engineering : developing an integrated, cross-disciplinary engineering design degree. In: Design Education for Creativity and Business Innovation. The Design Society, GBR. ISBN 978-1904670339

Tan, Xincai and Yan, Xiu and Juster, Neal and Ion, William (2011) Developing a course on advanced product development for an asia-link project. International Journal of Mechanical Engineering Education, 38 (2). ISSN 0306-4190

Wodehouse, Andrew and Ion, William (2011) Information and ideas : concept design in three industrial contexts. Journal of Design Research, 9 (4). pp. 390-404. ISSN 1748-3050

2010

Wodehouse, Andrew and Ion, William (2010) Information use in conceptual design : existing taxonomies and new approaches. International Journal of Design, 4 (3). pp. 53-65. ISSN 1991-3761

Wodehouse, A.J. and Grierson, H. and Breslin, C. and Eris, O. and Ion, W.J. and Liefer, L. and Mabogunje, A. (2010) A framework for design engineering education in a global context. International Journal on Artificial Intelligence for Engineering Design, Analysis and Manufacture, 24 (3). pp. 367-378. ISSN 0890-0604

Wodehouse, Andrew and Ion, W.J. (2010) The integration of information and ideas : creating linkages through a novel concept design method. Parsons Journal for Information Mapping, 2 (2). pp. 1-7.

Wodehouse, Andrew and Ion, William (2010) Digital information support for concept design. CoDesign, 6 (1). pp. 3-23. ISSN 1571-0882

Wodehouse, Andrew and Ion, William (2010) Computer gaming scenarios for product development teams. International Journal of Gaming and Computer-Mediated Simulations (IJGCMS), 2 (3). pp. 75-92. ISSN 1942-3888

2009

Grierson, Hilary and Ion, William; Bergendahl, Margareta Norell and Grimheden, Martin and Leifer, Larry, eds. (2009) Towards a set of principles and guidelines for distributed-design information storing. In: ICED 09. The Design Society, San Diego, California, pp. 87-98. ISBN 9781904670124

El Barky, Sahar Sobhy Sabry and Ion, William and El Sayed, A (2009) Application of reverse logistics for remanufacturing in the electro-mechanical sector. In: International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 2009, 2009-07-06 - 2009-07-08.

Conway, Alastair and Ion, William and Lynn, Andrew (2009) Knowledge Enhanced Notes (KEN). In: International Conference on Engineering Design 2009, 2009-08-24 - 2009-08-27, Stanford University.

Maclachlan, Ross and Ion, William and Kochanowska, Rowena and Hansen, Saskia and Herstatt, Cornelius and Buse, Stephan and Galla, Randolph and Boer, Harry (2009) A transferable model for innovative joint postgraduate degree programme development. In: 11th international conference on engineering and product design education, 2009-09-10 - 2009-09-11.

2008

Eng, N.L. and Giess, M and Conway, Alastair and Bracewell, R. and Clarkson, P.J. and McMahon, C.A. and Ion, William (2008) Comparing and integrating methods of design activity documentation across synchronous and asynchronous modes of collaborative work. In: NordDesign, 2011-08-20.

Grierson, Hilary and Wodehouse, Andrew and Breslin, Caroline and Ion, William and Nicol, David and Juster, Neal (2008) An evaluation study of a digital library of ideas : Workflow Model and classroom use. International Journal on Digital Libraries, 9 (1). pp. 29-39. ISSN 1432-5012

Giess, M and Conway, Alastair and McMahon, C.A. and Ion, William (2008) The integration of synchronous and asynchronous design activity records. In: International Design Conference - DESIGN 2008, 2011-08-20.

Grierson, Hilary and Ion, William (2008) Distributed design information and knowledge : storage and strategy. In: International Conference on Engineering and Product Design Education 2008, 2008-09-04 - 2008-09-05.

Conway, Alastair and Giess, M and Lynn, Andrew and Ding, L and Goh, Yee M and McMahon, Chris and Ion, William (2008) Holistic engineering design : a combined synchronous and asynchronous approach. In: ASME 2008 Design engineering technical conferences & computers and information in engineering conference, 2008-08-03 - 2008-08-06.

Conway, Alastair and Wodehouse, Andrew and Ion, William and Lynn, Andrew (2008) Specification of an information capture system to support distributed engineering design teams. In: Proceedings of International Conference on Advanced Design and Manufacture, 2008-01-14 - 2008-01-16.

Wodehouse, Andrew and Breslin, Caroline and Farrugia, Philip and Grierson, Hilary and Ion, William and Sonalkar, N. and deVere, I (2008) A task based approach to global design education. In: International Conference on Engineering and Product Design Education 2008, 2008-09-04 - 2008-09-05.

2007

Breslin, C. and Nicol, D. and Grierson, H. and Wodehouse, A. and Juster, N. and Ion, W. (2007) Embedding an integrated learning environment and digital repository in design engineering education : lessons learned for sustainability. British Journal of Educational Technology, 38 (5). pp. 805-816. ISSN 0007-1013

Mair, G. and Cunningham, D. and Grierson, H. and Ion, W. (2007) An integrated digital design and manufacture studio for educating future product designers. In: 9th International Conference on Engineering and Product Design Education, 2007-09-13 - 2007-09-14.

Wodehouse, A. and Breslin, C. and Eris, O. and Grierson, H. and Ion, W. and Jung, M. and Leifer, L. and Mabogunje, A. and Sonalkar, N. (2007) A reflective approach to learning in a global design project. In: 9th International Conference on Engineering and Product Design Education, 2007-09-13 - 2007-09-14.

Conway, Alastair and Wodehouse, Andrew and Ion, William and Juster, Neal (2007) A study of information & knowledge generated during engineering design meetings. In: International Conference on Engineering Design (ICED), 2007-08-28.

Thomson, A.I. and Stone, A.L. and Ion, W.J. (2007) Distributed team design in small and medium sized enterprises - how to get it right. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacture, 21 (3). pp. 203-218.

Anderson, Anthony and Sanford, Alison and Thomson, Avril and Ion, William (2007) Computer-supported and face-to-face collaboration on design tasks. Discourse Processes, 43 (3). pp. 201-228. ISSN 0163-853X

Thomson, A.I. and Stone, A.L. and Ion, W.J.; MacGregor, Steven P. and Torres-Coronas, Teresa, eds. (2007) Enabling creative virtual teams in SMEs. In: Higher Creativity for Virtual Teams Developing Platforms for Co-Creation. Information Science Reference. ISBN 978-1-59904-129-2

2006

Wodehouse, A.J. and Grierson, H.J. and Ion, W.J. and Juster, N.P. The Design Society (2006) Student search behaviour in a digital library. In: Educating Designers for a Global Context? Proceedings of the 4th Engineering & Product Design Education International Conference, Salzburg, Austria, 7-8 September, 2006. Hadleys, Basildon, United Kingdom, pp. 157-162. ISBN 0955394201

Grierson, H. and Wodehouse, A. and Breslin, C. and Ion, W. and Juster, N. (2006) Building a design engineering digital library : the workflow issues. In: Engineering and Product Design Education Conference, 2006-09-07 - 2006-09-08.

Ion, W.J. and Conway, A. and Wodehouse, A.J. and Lynn, A.; (2006) Computer support for distributed design teams. In: Proceedings of Knowledge and information management: the challenge of through life support, London, 26 September 2006. Institution of Mechanical Engineers.

Rothbucher, B. and Kolar, M. and Ion, W.J. and Clarke, A. (2006) Educating designers for a global context?: proceedings of the 4th engineering and product design education international conference, Salzburg, Austria, 7-8 September, 2006. Hadleys Ltd, Basildon, United Kingdom. ISBN 9780955394201

Grierson, H. and Ion, W. and Juster, N. (2006) Project memories: documentation and much more for global team design. In: International Engineering and Product Design Education Conference, 2006-09-07 - 2006-09-08.

Sonalkar, N. and Mabogunje, A. and Jung, M. and Eris, O. and Wodehouse, A. and Grierson, H. and Leifer, L. and Lynn, A. and Juster, N. and Ion, W. (2006) A conceptual framework for understanding the impact of digital libraries on engineering design learning performance. In: Proceedings of IDETC/CIE 2006, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006-09-10 - 2006-09-13.

Wang, D. and Yan, X.T. and Ion, W.J. and Wang, R. (2006) A framework for supporting intelligent and flexible workflow-based engineering design process. International Journal of Product Development, 1 (1). pp. 1-20. ISSN 1477-9056

2005

Grierson, H. and Wodehouse, A. and Ion, W. and Juster, N.P. (2005) Supporting reflection and problem-based learning through the use of LauLima. In: 3rd Engineering and Product Design Education International Conference, 2005-09-15 - 2005-09-16.

Wodehouse, A. and Grierson, H. and Ion, W. and Juster, N.P. and McGill, L. (2005) Enhancing design learning using a digital repository. In: International Conference on Engineering Design (ICED 05), 2005-08-15 - 2005-08-18.

McGill, Lou and Nicol, David and Littlejohn, Allison and Grierson, Hilary and Juster, Neal and Ion, William J. (2005) Creating an information-rich learning environment to enhance design student learning: challenges and approaches. British Journal of Educational Technology, 36 (4). pp. 629-642. ISSN 0007-1013

Herbert, Nicholas and Simpson, David and Spence, William D. and Ion, William (2005) A preliminary investigation into the development of 3D printing of prosthetic sockets. Journal of Rehabilitiation Research and Development, 42 (2). pp. 141-146. ISSN 0748-7711

2004

Wodehouse, A. and Grierson, H. and Ion, W.J. and Juster, N.P. and Lynn, A. and Stone, A. (2004) TikiWiki: a tool to support engineering design students in concept generation. In: Conference Proceedings of IEPDE04, 2004-09-01.

Juster, N. and Greirson, H. and Nicol, D. and Ion, B. and Stone, A. and Wodehouse, A. (2004) Using digital libraries to enhance distributed design team performance. In: ASME 2004 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2004-09-01.

Ion, W.J. and Wodehouse, A. and Juster, N.P. and Grierson, H. and Stone, A. (2004) Educating the global designer. In: Conference Proceedings of EASED 2004, 2004-01-01.

Wodehouse, A.J. and Grierson, H.J. and McGill, L.K. and Ion, W.J. and Juster, N.P. and Stone, A.L. (2004) Efficacy of a digital repository for retrieval, storage and use of technical information in a student product development project. In: 4th International Conference of Advanced Engineering Design, 2004-09-05 - 2004-09-08.

Ion, W.J. and Wodehouse, A. and Juster, N.P. and Grierson, H. and Stone, A. (2004) The impact of documentation and reflection on student learning in engineering design: a concept development project in the digital domain. In: Conference Proceedings of EASED 2004, 2004-01-01.

Ion, W.J. and Stone, A. and Grierson, H. and Juster, N.P. and Wodehouse, A. (2004) A study of student learning in design projects. In: Conference Proceedings of IEPDE04, 2004-09-01.

2002

Steele, K.A.M. and Thomson, A.I. and Ryder, G. and Ion, W.J.; Rennie, ,A. E. W. and Jacobson, D.M. and Bocking, C.E., eds. (2002) Reducing the uncertainty of the prototyping decision. In: Third National Conference on Rapid Prototyping, Tooling, and Manufacturing. Professional Engineering, Bury St. Edmunds, United Kingdom. ISBN 9781860583742

Ryder, Gerard and Ion, Bill and Green, Graham and Harrison, David and Wood, Bruce (2002) Rapid design and manufacture tools in architecture. Automation in Construction, 11 (3). pp. 279-290. ISSN 0926-5805

2001

Sclater, Niall and Grierson, Hilary and Ion, William J. and MacGregor, Steven P. (2001) Online collaborative design projects: overcoming barriers to communication. International Journal of Engineering Education, 17 (2). pp. 189-196. ISSN 0949-149X