# Browse by Journal or other publication

Up a level |

**16**.

## 2018

Kostas, K.V. and Fyrillas, M.M. and Politis, C.G and Ginnis, A.I. and Kaklis, P.D.
(2018)
*Shape optimization of conductive-media interfaces using an IGA-BEM solver.*
Computer Methods in Applied Mechanics and Engineering, 340.
pp. 600-614.
ISSN 0045-7825

Allendes, Alejandro and Barrenechea, Gabriel R. and Narranjo, Cesar
(2018)
*A divergence-free low-order stabilized finite element method for a generalized steady state Boussinesq problem.*
Computer Methods in Applied Mechanics and Engineering.
ISSN 0045-7825

Barrenechea, Gabriel R. and Poza, Abner H. and Yorston, Heather
(2018)
*A stabilised finite element method for the convection-diffusion-reaction equation in mixed form.*
Computer Methods in Applied Mechanics and Engineering.
ISSN 0045-7825
(In Press)

## 2017

Barrenechea, Gabriel and Burman, Erik and Karakatsani, Fotini
(2017)
*Blending low-order stabilised finite element methods : a positivity-preserving local projection method for the convection-diffusion equation.*
Computer Methods in Applied Mechanics and Engineering, 317.
pp. 1169-1193.
ISSN 0045-7825

## 2016

Rowlatt, C.F. and Phillips, T.N.
(2016)
*A spectral element formulation of the immersed boundary method for Newtonian fluids.*
Computer Methods in Applied Mechanics and Engineering, 298.
pp. 29-57.
ISSN 0045-7825

## 2015

Tsoutsanis, Panagiotis and Kokkinakis, Ioannis and Könözsy, László and Drikakis, Dimitris and Williams, Robin J.R. and Youngs, David L.
(2015)
*Comparison of structured- and unstructured-grid, compressible and incompressible methods using the vortex pairing problem.*
Computer Methods in Applied Mechanics and Engineering, 293.
pp. 207-231.
ISSN 0045-7825

Kokkinakis, Ioannis and Drikakis, D.
(2015)
*Implicit large eddy simulation of weakly-compressible turbulent channel flow.*
Computer Methods in Applied Mechanics and Engineering, 287.
pp. 229-261.
ISSN 0045-7825

Kostas, K. V. and Ginnis, A. I. and Politis, C. G. and Kaklis, P. D.
(2015)
*Ship-hull shape optimization with a T-spline based BEM-isogeometric solver.*
Computer Methods in Applied Mechanics and Engineering, 284.
pp. 611-622.
ISSN 0045-7825

## 2014

Ginnis, A.I. and Kostas, K.V. and Politis, C.G. and Kaklis, P.D. and Belibassakis, K.A. and Gerostathis, Th.P. and Scott, M.A. and Hughes, T.J.R.
(2014)
*Isogeometric boundary-element analysis for the wave-resistance problem using T-splines.*
Computer Methods in Applied Mechanics and Engineering, 279.
pp. 425-439.
ISSN 0045-7825

## 2013

Alexiadis, Alessio and Lockerby, Duncan A. and Borg, Matthew Karl and Reese, Jason
(2013)
*A Laplacian-based algorithm for non-isothermal atomistic-continuum hybrid simulation of micro and nano-flows.*
Computer Methods in Applied Mechanics and Engineering, 264.
pp. 81-94.
ISSN 0045-7825

## 2011

Ainsworth, Mark and Rankin, Richard Andrew Robert
(2011)
*Realistic computable error bounds for three dimensional finite element analyses in linear elasticity.*
Computer Methods in Applied Mechanics and Engineering, 200 (21-22).
pp. 1909-1926.
ISSN 0045-7825

## 2010

Barrenechea, Gabriel and Valentin, Frédéric
(2010)
*A residual local projection method for the Oseen equation.*
Computer Methods in Applied Mechanics and Engineering, 199 (29-32).
pp. 1906-1921.

## 2009

Mihai, L. Angela and Ainsworth, Mark
(2009)
*A finite element procedure for rigorous numerical enclosures on the limit load in the analysis of multibody structures.*
Computer Methods in Applied Mechanics and Engineering, 199 (1-4).
pp. 48-60.

## 2007

Barrenechea, Gabriel and Blasco, Jordi
(2007)
*Pressure stabilization of finite element approximations of time-dependent incompressible flow problems.*
Computer Methods in Applied Mechanics and Engineering, 197 (1-4).
pp. 219-231.

## 2001

Ainsworth, Mark and Coyle, Joe
(2001)
*Hierarchic hp-edge element families for Maxwell's equations on hybrid quadrilateral/triangular meshes.*
Computer Methods in Applied Mechanics and Engineering, 190 (49-50).
pp. 6709-6733.

Ainsworth, M.
(2001)
*Essential boundary conditions and multi-point constraints in finite element analysis.*
Computer Methods in Applied Mechanics and Engineering, 190 (48).
pp. 6323-6339.