Browse by Journal or other publication

2019

Haines, Matthew and Taylor, Ian (2019) The turbulence modelling of a pulsed impinging jet using LES and a divergence free mass flux corrected turbulent inlet. Journal of Wind Engineering and Industrial Aerodynamics, 188. pp. 338-364. ISSN 0167-6105

2018

Haines, Matthew and Taylor, Ian (2018) Numerical investigation of the flow field around low rise buildings due to a downburst event using Large Eddy Simulation. Journal of Wind Engineering and Industrial Aerodynamics, 172. pp. 12-30. ISSN 0167-6105

2017

Kazemi Amiri, A. and Bucher, C. (2017) A procedure for in situ wind load reconstruction from structural response only based on field testing data. Journal of Wind Engineering and Industrial Aerodynamics, 167. pp. 75-86. ISSN 0167-6105

2016

Wang, Lin and Quant, Robin and Kolios, Athanasios (2016) Fluid structure interaction modelling of horizontal-axis wind turbine blades based on CFD and FEA. Journal of Wind Engineering and Industrial Aerodynamics, 158. pp. 11-25. ISSN 0167-6105

2015

Orlandi, A. and Collu, M. and Zanforlin, S. and Shires, A. (2015) 3D URANS analysis of a vertical axis wind turbine in skewed flows. Journal of Wind Engineering and Industrial Aerodynamics, 147. pp. 77-84. ISSN 0167-6105

Cross, Daniel and Hughes, Ben and Ingham, Derek and Ma, Lin (2015) A validated numerical investigation of the effects of high blockage ratio and train and tunnel length upon underground railway aerodynamics. Journal of Wind Engineering and Industrial Aerodynamics, 146. pp. 195-206. ISSN 0167-6105

2014

Fabre, S. and Stickland, M. and Scanlon, T. and Oldroyd, A. and Kindler, D. and Quail, F. (2014) Measurement and simulation of the flow field around the FINO 3 triangular lattice meteorological mast. Journal of Wind Engineering and Industrial Aerodynamics, 130. pp. 99-107. ISSN 0167-6105

Calautit, John Kaiser and Chaudhry, Hassam Nasarullah and Hughes, Ben Richard and Sim, Lik Fang (2014) A validated design methodology for a closed-loop subsonic wind tunnel. Journal of Wind Engineering and Industrial Aerodynamics, 125. pp. 180-194. ISSN 0167-6105

2011

Taylor, Ian and Robertson, Andrew Colin (2011) Numerical simulation of the airflow–rivulet interaction associated with the rain-wind induced vibration phenomenon. Journal of Wind Engineering and Industrial Aerodynamics, 99 (9). pp. 931-944. ISSN 0167-6105

2010

Stickland, M.T. and Scanlon, T.J. (2010) EU-NORSEWIND Investigation of flow distortion effects on offshore instrumentation. Journal of Wind Engineering and Industrial Aerodynamics. ISSN 0167-6105 (Unpublished)

2008

Taylor, I. J. and Vezza, M. and Salisbury, I (2008) Numerical investigation of the effects of pedestrian barriers on aeroelastic stability of a proposed footbridge. Journal of Wind Engineering and Industrial Aerodynamics, 96 (12). pp. 2418-2437. ISSN 0167-6105

Wang, F. and Bai, l. and Fletcher, J.E. and Whiteford, J. and Cullen, D. (2008) Development of small domestic wind turbine with scoop and prediction of its annual power output. Journal of Wind Engineering and Industrial Aerodynamics, 33 (7). pp. 1637-1651. ISSN 0167-6105

Wang, F. and Bai, l. and Fletcher, J.E. and Whiteford, J. and Cullen, D. (2008) The methodology for aerodynamic study on a small domestic wind turbine with scoop. Journal of Wind Engineering and Industrial Aerodynamics, 96 (1). pp. 1-24. ISSN 0167-6105

1996

Day, Alexander (1996) Sail optimisation for maximal speed. Journal of Wind Engineering and Industrial Aerodynamics, 63 (1-3). pp. 131-154. ISSN 0167-6105

1992

JAMIESON, P and BOWLES, A and DERRICK, A and LEITHEAD, W and ROGERS, M (1992) Innovative concepts for aerodynamic control of wind turbine rotors. Journal of Wind Engineering and Industrial Aerodynamics, 39 (1-3). pp. 395-404. ISSN 0167-6105