Picture of fish in sea

Open Access research that uses mathematical models to solve ecological problems...

Solving a variety of ecological and biological problems is the focus of marine population modelling research conducted within the Department of Mathematics & Statistics. Here research deploys mathematical models to better understanding issues relating to fish stock management, ecosystem dynamics, ocean currents, and the effects of multispecies interactions within diverse marine ecosystems.

Research work in marine population modelling interfaces with a number of other key research specialisms, including mathematical biology, epidemiology and statistical informatics, where investigations are improving human understanding of the behaviour of infectious diseases, particularly in relation to animal infections; but also the modelling of complex biological processes such as antibiotic prodcution in actinobacteria.

Explore some of the Open Access research from Mathematics & Statistics. Or explore all of Strathclyde's Open Access research...

Items where department is "Faculty of Engineering > Mechanical and Aerospace Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Publication Date | Authors | Item type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Ö
Number of items at this level: 3735.

A

Allmark, Matthew and Ellis, Robert and Lloyd, Catherine and Ordonez-Sanchez, Stephanie and Johannesen, Kate and Byrne, Carl and Johnstone, Cameron and O'Doherty, Tim and Mason-Jones, Allan (2020) The development, design and characterisation of a scale model Horizontal Axis Tidal Turbine for dynamic load quantification. Renewable Energy, 156. pp. 913-930. ISSN 0960-1481

Afsar, M. Z. (2020) The relationship between the surface pressure spectrum and transverse velocity spectrum in a Rapid-distortion theory model of trailing edge noise. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.

Afsar, M. Z. and Gryazev, V. and Markesteijn, A. and Karabasov, S. (2020) Effect of large-scale mixing on the axisymmetric structure of turbulence correlations in complex dual stream jets. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.

Afsar, M. Z. and Sescu, A. and Gryazev, V. and Markesteijn, A. and Karabasov, S. (2020) Analysis of the non-parallel flow-based Green's function in the acoustic analogy for complex axisymmetric jets. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.

Afsar, M. Z. and Sescu, A. and Leib, S. J. (2020) Improved jet noise predictions in subsonic flows using an approximate composite asymptotic expansion of the adjoint Green's function in Goldstein's analogy. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.

Afsar, M. Z. and Stirrat, S. A. and Kokkinakis, I. W. (2020) Investigation of fast GPU-based algorithms for jet-surface interaction noise calculations. In: 2020 AIAA Aviation and Aeronautics Forum and Exposition, 2020-06-15 - 2020-06-19, Virtual Event.

Afsar, Mohammed and Stirrat, Sarah and McLeod, Lydia (2020) Structure of turbulence prior to rapid-distortion. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.

Afsar, Mohammed Z. and Sescu, Adrian and Leib, Stewart J. (2019) Modelling and prediction of the peak radiated sound in sub-sonic axisymmetric air jets using acoustic analogy based asymptotic analysis. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2159). 20190073. ISSN 1471-2962

Afsar, Mohammed (2019) Improved predictions of trailing-edge noise using rapid-distortion theory and CFD data. In: Sixteenth International Conference on Flow Dynamics, 2019-11-06 - 2019-11-08, Tohoku University.

Afsar, Mohammed (2019) A general approach to modeling jet-turbulence interaction problems using rapid-distortion theory. In: Sixteenth International Conference on Flow Dynamics, 2019-11-06 - 2019-11-08, Tohoku University.

Afsar, M. Z. and Sescu, A. and Sassanis, V. (2019) Effect of non-parallel mean flow on the acoustic spectrum of heated supersonic jets : explanation of 'jet quietening'. Physics of Fluids B. ISSN 2163-503X (In Press)

Alcérreca-Huerta, Juan C. and Callejas-Jiménez, Mariana E. and Ordonez-Sanchez, Stephanie and Gallegos, Gabriel and Allmark, Matthew J. and Johnstone, Cameron M. and Marino-Tapia, Ismael and O’Doherty, Tim and Silva, Rodolfo and Carrillo, Laura (2019) Resource assessment of the marine current developed in the Cozumel Channel. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.

Allmark, Matthew and Ordonez-Sanchez, Stephanie and Wang, Sujin and Kang, Yo Seop and Jo, Chul-Hee and O'Doherty, Tim and Johnstone, Cameron (2019) An investigation into Reynolds scaling and solidity for a HATT tidal turbine. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.

Ahmad, Bilal and Galloway, Alexander and Toumpis, Athanasios (2019) Numerical optimisation of laser assisted friction stir welding of structural steel. Science and Technology of Welding and Joining, 24 (6). pp. 548-558. ISSN 1362-1718

Afsar, Mohammed Z.; (2019) Improved trailing edge noise prediction using a generalized Rapid-distortion theory approach. In: 25th AIAA/CEAS Aeroacoustics Conference. AIAA, NLD. ISBN 9781624105883

Afsar, Mohammed Z. and Sescu, Adrian and Minisci, Edmondo; (2019) Modeling supersonic heated jet noise at fixed jet Mach number using an asymptotic approach for the acoustic analogy Green’s function and an optimized turbulence model. In: 25th AIAA/CEAS Aeroacoustics Conference. AIAA, NLD. ISBN 9781624105883

Alcérreca-Huerta, Juan Carlos and Encarnacion, Job Immanuel and Ordoñez-Sánchez, Stephanie and Callejas-Jiménez, Mariana and Gallegos Diez Barroso, Gabriel and Allmark, Matthew and Mariño-Tapia, Ismael and Silva Casarín, Rodolfo and O'Doherty, Tim and Johnstone, Cameron and Carrillo, Laura (2019) Energy yield assessment from ocean currents in the insular shelf of Cozumel Island. Journal of Marine Science and Engineering, 7 (5). 147. ISSN 2077-1312

Abid, Muhammad and Nash, David Hugh and Javed, Saif and Wajid, Hafiz Abdul (2018) Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading – FEA study. International Journal of Pressure Vessels and Piping, 168. pp. 166-173. ISSN 0308-0161

Allison, J. and Cowie, A. and Flett, G. and Hand, J W and Hawker, G and Kelly, N J (2018) Modelling responsive demand from electrified domestic heating and storage under different operating strategies. In: uSIM - Urban Energy Simulation, 2018-11-30 - 2018-11-30, University of Strathclyde.

Abdalla, Fatin and Tuohy, Paul and Evans, Dorothy and Blackwell, Paul (2018) A review of integrated phase change materials for evacuated tube solar collector system. In: International Conference on Energy Research, 2018-10-31 - 2018-11-02.

Alobaid, Mohammad and Hughes, Ben and Heyes, Andrew and O'Connor, Dominic (2018) Determining the effect of inlet flow conditions on the thermal efficiency of a flat plate solar collector. Fluids, 3 (3). 67.

Ahmad, Bilal and Galloway, Alexander and Toumpis, Athanasios (2018) Advanced numerical modelling of friction stir welded low alloy steel. Journal of Manufacturing Processes, 34 (Part A). pp. 625-636. ISSN 1526-6125

Alobaid, Mohammad and Hughes, Ben and O’Connor, Dominic and Calautit, John and Heyes, Andrew (2018) Improving thermal and electrical efficiency in photovoltaic thermal systems for sustainable cooling system integration. Journal of Sustainable Development of Energy, Water and Environment Systems, 6 (2). pp. 305-322. ISSN 1848-9257

Avanzini, Giulio and de Angelis, Emanuele L. and Giulietti, Fabrizio and Minisci, Edmondo (2018) Optimal sizing of electric multirotor configurations. In: 8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation, 2018-09-04 - 2018-09-07, University of Glasgow. (In Press)

Allison, John and Bell, Keith and Clarke, Joe and Cowie, Andrew and Elsayed, Ahmed and Flett, Graeme and Oluleye, Gbemi and Hawkes, Adam and Hawker, Graeme and Kelly, Nick and Manuela Marinho de Castro, Maria and Sharpe, Tim and Shea, Andy and Strachan, Paul and Tuohy, Paul (2018) Assessing domestic heat storage requirements for energy flexibility over varying timescales. Applied Thermal Engineering, 136. pp. 602-616. ISSN 1359-4311

Arnot, C. S. and McInnes, C. R. and McKay, R. J. and Macdonald, M. and Biggs, J. (2018) Orbit period modulation for relative motion using continuous low thrust in the two-body and restricted three-body problems. Celestial Mechanics and Dynamical Astronomy, 130 (12). ISSN 0923-2958

Ayub, A. S. and Siew, W. H. and Stickland, M. (2018) External lightning protection system for wind turbine blades - power performance. CIGRE Science and Engineering, 10. pp. 88-94. ISSN 1286-1146

Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) A study on the Wind-Induced Flutter Energy Harvester (WIFEH) integration into buildings. Energy Procedia, 142. pp. 321-327. ISSN 1876-6102

Al Bugharbee, Hussein and Trendafilova, Irina (2017) A methodology for fault detection in rolling element bearings using singular spectrum analysis. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07. (In Press)

Al-Bugharbee, Hussein Razzaq Sabah and Abolfathi, Ali and Trendafilova, Irina (2017) Vibration-based damage detection of structure's joints in presence of uncertainty. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07.

Afsar, Mohammed and Sassanis, Vasilis (2017) Sound radiated by the interaction of non-homogeneous turbulence on a transversely sheared flow with leading and trailing edges of semi-infinite flat plate. In: The 70th Annual Meeting of the American Physical Society Division of Fluid Dynamics, 2017-11-19 - 2017-11-21, Colorado Convention Center.

Ayub, A. S. and Siew, W.H. and Stickland, M. (2017) External lightning protection system for wind turbine blades - aerodynamics. CIGRE Science and Engineering. ISSN 1286-1146

Allison, John and Cowie, Andrew and Galloway, Stuart and Hand, Jon and Kelly, Nicolas and Stephen, Bruce (2017) Simulation, implementation and monitoring of heat pump load shifting using a predictive controller. Energy Conversion and Management, 150. pp. 890-903. ISSN 0196-8904

Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) Integration of aero-elastic belt into the built environment for low-energy wind harnessing : current status and a case study. Energy Conversion and Management, 149. pp. 830-850. ISSN 0196-8904

Alobaid, Mohammad and Hughes, Ben and Kaiser Calautit, John and O'Connor, Dominic and Heyes, Andrew (2017) A review of solar driven absorption cooling with photovoltaic thermal systems. Renewable and Sustainable Energy Reviews, 76. pp. 728-742. ISSN 1364-0321

Anwar, Ali A.; Dempster, William and Gorash, Yevgen, eds. (2017) 3D micro-macro fluid-structure model of pressure relief valve leak tightness. In: ASME 2017 Pressure Vessels and Piping Conference. ASME, USA. ISBN 9780791857984

Anwar, Ali A.; Dempster, William and Gorash, Yevgen and Nash, David, eds. (2017) Surface roughness 3D modelling and its association with leak tightness for a metal-to-metal contacting surface. In: ASME 2017 Pressure Vessels and Piping Conference. ASME, USA. ISBN 978-0-7918-5797-7

Afsar, M. Z. and Sescu, A. and Sassanis, V. and Lele, S. K. (2017) Towards the prediction of supersonic jet noise predictions using a unified asymptotic approximation for the adjoint vector Green's function. In: 23rd AIAA/CEAS Aeroacoustics Conference, 2017-06-05 - 2017-06-09.

Al-Bugharbee, H and Trendafilova, I (2017) A new methodology for fault detection in rolling element bearings using singular spectrum analysis. International Journal of Condition Monitoring, 7 (2). pp. 26-35. ISSN 2047-6426

Aquino, Angelo I. and Calautit, John Kaiser and Hughes, Ben Richard (2017) Urban integration of aeroelastic belt for low-energy wind harvesting. Energy Procedia, 105. pp. 738-743. ISSN 1876-6102

Allison, John and Cowie, Andrew and Galloway, Stuart and Hand, Jon and Kelly, Nick and Stephen, Bruce (2017) Simulation and implementation of heat load shifting in a low carbon building. In: The 4th Sustainable Thermal Energy Management International Conference, 2017-06-28 - 2017-06-30, The Golden Tulip Hotel. (In Press)

Antoniadis, Antonis F. and Tsoutsanis, Panagiotis and Drikakis, Dimitris (2017) Assessment of high-order finite volume methods on unstructured meshes for RANS solutions of aeronautical configurations. Computers and Fluids, 146. pp. 86-104. ISSN 0045-7930

Allison, John and Bell, Keith and Clarke, Joe and Cowie, Andrew and Elsayed, Ahmed and Flett, Graeme and Gbemi, Oluleye and Hawkes, Adam and Hawker, Graeme and Kelly, Nick and Manuela Marinho de Castro, Maria and Sharpe, Timothy and Shea, Andy and Strachan, Paul (2017) Domestic thermal storage requirements for heat demand flexibility. In: The 4th Sustainable Thermal Energy Management International Conference, 2017-06-28 - 2017-06-30, The Golden Tulip Hotel. (In Press)

Afsar, Mohammed and Leib, Stewart and Bozak, Richard (2017) Effect of de-correlating turbulence on the low frequency decay of jet-surface interaction noise in sub-sonic unheated air jets using a CFD-based approach. Journal of Sound and Vibration, 386. 177–207. ISSN 0022-460X

Afsar, M. Z. and Sescu, A. and Sassanis, V. and Towne, A. and Brès, G. A. and Lele, S. K.; (2016) Prediction of supersonic jet noise using non-parallel flow asymptotics and LES data within Goldstein’s acoustic analogy. In: Studying Turbulence using Numerical Simulation Databases - XVI. Stanford University, Center for Turbulence Research, Stanford, California.

Adams, Steven and Schnittger, Sorcha and Kockar, Ivana and Kelly, Nicolas and Xu, Han and Monari, Filippo and Edrah, Mohamed and Zhang, Jixing and Bell, George (2016) Impact of Electrolysers on the Network. [Report]

Anwar, Ali and Gorash, Yevgen and Dempster, William and Nash, David (2016) Deformed gap space using macro-micro FEA model and transferred into a CFD model. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). 61264. ISSN 1617-7061

Absil, Carlos Ortega and Serra, Romain and Riccardi, Annalisa and Vasile, Massimiliano; (2016) De-orbiting and re-entry analysis with generalised intrusive polynomial expansions. In: 67th International Astronautical Congress. Proceedings of the International Astronautical Congress, IAC . International Astronautical Federation (IAF), MEX.

Agius Anastasi, Anthea and Ritos, Konstantinos and Cassar, Glenn and Borg, Matthew K. (2016) Mechanical properties of pristine and nanoporous graphene. Molecular Simulation. pp. 1-10. ISSN 0892-7022

Allison, John (2016) Robust multi-objective control of hybrid renewable microgeneration systems with energy storage. Applied Thermal Engineering, 114. pp. 1498-1506. ISSN 1359-4311

Anwar, Ali A. and Gorash, Yevgen and Dempster, William; Naumenko, Konstantin and Aßmus, Marcus, eds. (2016) Application of multiscale approaches to the investigation of sealing surface deformation for the improvement of leak tightness in pressure relief valves. In: Advanced Methods of Continuum Mechanics for Materials and Structures. Advanced Structured Materials, 60 . Springer, Singapore, pp. 493-522. ISBN 9789811009587

Al-Bugharbee, Hussein and Trendafilova, Irina (2016) A fault diagnosis methodology for rolling element bearings based on advanced signal pretreatment and autoregressive modelling. Journal of Sound and Vibration, 369 (12 May). pp. 246-245. ISSN 0022-460X

Anwar, Ali A. and Ritos, Konstantinos and Gorash, Yevgen and Dempster, William and Nash, David (2016) Microflow leakage through the clearance of a metal-metal seal. In: ASME Pressure Vessels & Piping Conference 2016, 2016-07-17 - 2016-07-21, Hyatt Regency Vancouver. (In Press)

Abid, Muhammad and Khan, Ayesha and Nash, David Hugh and Hussain, Masroor and Wajid, Hafiz Abdul (2016) Optimized bolt tightening strategies for gasketed flanged pipe joints of different sizes. International Journal of Pressure Vessels and Piping, 139-140. pp. 22-27. ISSN 0308-0161

Allison, John and Murphy, Gavin Bruce and Counsell, John (2016) Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation. International Journal of Low-Carbon Technologies, 11 (1). pp. 109-118. ISSN 1748-1317

Anwar, Ali and Gorash, Yevgen and Dempster, William and Hamilton, Robert and Nash, David (2016) Effect of high temperature on structural behaviour of metal-to-metal seal in a pressure relief valve. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.

Arena, A. and Lacarbonara, W. and Cartmell, M.P. (2016) Nonlinear interactions in deformable container cranes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (1). pp. 5-20. ISSN 0954-4062

Abid, M. and Khan, A. and Nash, D.H. and Hussain, M. and Wajid, H.A. (2015) Simulation of optimized bolt tightening strategies for gasketed flanged pipe joints. Procedia Engineering, 130. pp. 204-213. ISSN 1877-7058

Anwar, A.A. and Gorash, Y. and Dempster, W. and Hamilton, R. (2015) Literature research in relevant fields to understand pressure relief valve leak tightness in a static closed state. Procedia Engineering, 130. pp. 95-103. ISSN 1877-7058

Acayaba, Gabriel Medrado Assis and Muñoz de Escalona, Patricia (2015) Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel. CIRP Journal of Manufacturing Science and Technology, 11. pp. 62-67. ISSN 1755-5817

Allison, John (2015) Robust control of net-zero offices with integrated hybrid supply system and energy storage. In: Microgen IV, 2015-10-28 - 2015-10-30, Ito International Research Center.

Ahamed, Rafee A.R. and Johnstone, Cameron M. and Stack, Margaret M. (2015) Mapping blade angle effects for the erosion of polymer based composites : an approach to developing smart materials for tidal turbines. In: 11th European Wave and Tidal Energy Conference (EWTEC2015), 2015-09-06 - 2015-09-11, Cité des Congrès de Nantes.

Al-Bugharbee, H and Trendafilova, I (2015) Autoregressive modelling for rolling element bearing fault diagnosis. Journal of Physics: Conference Series, 628 (1). 012088. ISSN 1742-6588

Agimelen, Okpeafoh S. and Hamilton, Peter and Haley, Ian and Nordon, Alison and Vasile, Massimiliano and Sefcik, Jan and Mulholland, Anthony J. (2015) Estimation of particle size distribution and aspect ratio of non-spherical particles from chord length distribution. Chemical Engineering Science, 123. pp. 629-640. ISSN 0009-2509

Andrews, N. and Giourntas, L. and Galloway, A. M. and Pearson, A. (2015) Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316. International Journal of Refractory Metals and Hard Materials, 48. pp. 229-237. ISSN 0263-4368

Andrews, Nicola and Giourntas, L. and Galloway, A. M. and Pearson, A. (2014) Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316. Wear, 320 (1-2). pp. 143-151. ISSN 0043-1648

Anderson, Pamela and Macdonald, Malcolm and Dobke, Benjamin (2014) A geostationary equivalent Polar observation system. In: 12th Reinventing Space Conference, 2014-11-18 - 2014-11-21.

Angling, M.J. and Kirkby, G. and Harkness, P. and McRobb, M. and Vasile, M. and Sinn, T.; (2014) The wideband ionospheric sounder cubesat experiment (WISCER). In: 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS). IEEE, CHN, pp. 1-4. ISBN 9781467352253

Alicino, Simone and Vasile, Massimiliano (2014) Evidence-based preliminary design of spacecraft. In: 6th International Conference on Systems & Concurrent Engineering for Space Applications. SECESA 2014, 2014-10-08 - 2014-10-10, Stuttgart.

Alicino, Simone and Vasile, Massimiliano (2014) Evidence-based preliminary design of spacecraft. In: 6th International Conference on Systems & Concurrent Engineering for Space Applications. SECESA 2014, 2014-10-08 - 2014-10-10.

Alshaikh, Moftah S. and Dempster, William (2014) A CFD study on two-phase frozen flow of air/water through a safety relief valve. In: 13th International Conference on Multiphase Flow in Industrial Plants, MFIP13, 2014-09-16 - 2014-09-19, Genoa.

Alicino, Simone and Vasile, Massimiliano (2014) Analysis of two algorithms for multi-objective min-max optimization. In: Bio-inspired Optimization Methods and their Applications, BIOMA 14, 2014-09-13 - 2014-09-13.

Alicino, Simone and Vasile, Massimiliano; (2014) An evolutionary approach to the solution of multi-objective min-max problems in evidence-based robust optimization. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., GBR, pp. 1179-1186. ISBN 9781479914883

Alessi, E.M. and Rossi, A. and Valsecchi, G.B. and Anselmo, L. and Pardini, C. and Colombo, C. and Lewis, H.G. and Daquin, J. and Deleflie, F. and Vasile, M. and Zuiani, F. and Merz, K. (2014) Effectiveness of GNSS disposal strategies. Acta Astronautica, 99. pp. 292-302. ISSN 0094-5765

Abid, Muhammad and Awan, Abdul Waheed and Nash, David (2014) Determination of load capacity of a nongasketed flange joint under combined internal pressure, axial and bending loading for safe strength and sealing. Journal of the Brazilian Society of Mechanical Sciences, 36 (3). pp. 477-490. ISSN 0100-7386

Appourchaux, T and Auchère, F and Antonucci, E and Gizon, L and Macdonald, Malcolm and Hara, H and Sekii, T and Moses, D and Vourlidas, A; Macdonald, Malcolm, ed. (2014) SOLARIS : Solar sail investigation of the Sun. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 259-268. ISBN 978-3-642-34906-5

Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan (2014) Novel orbits of Mercury, Venus and Mars enabled using low-thrust propulsion. Acta Astronautica, 94 (2). pp. 634-645. ISSN 0094-5765

Alicino, Simone and Vasile, Massimiliano; (2014) An evolutionary approach to the solution of multi-objective min-max problems in evidence-based robust optimization. In: Proceedings of the 2014 IEEE Congress on Evolutionary Computation, CEC 2014. Institute of Electrical and Electronics Engineers Inc., pp. 1179-1186. ISBN 9781479914883

Anderson, Pamela and Macdonald, Malcolm (2013) Sun-synchronous highly elliptical orbits using low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1849-1855. ISSN 1533-3884

Alexiadis, Alessio and Lockerby, Duncan A. and Borg, Matthew Karl and Reese, Jason (2013) A Laplacian-based algorithm for non-isothermal atomistic-continuum hybrid simulation of micro and nano-flows. Computer Methods in Applied Mechanics and Engineering, 264. pp. 81-94. ISSN 0045-7825

Alicino, Simone and Vasile, Massimiliano; (2013) Surrogate-based maximization of belief function for robust design optimization. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference . American Institute of Aeronautics and Astronautics, USA. ISBN 9781624102233

Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161

Anderson, Pamela and Macdonald, Malcolm (2013) Static highly elliptical orbits using hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (3). pp. 870-880. ISSN 1533-3884

Allison, John and Murphy, Gavin Bruce (2013) Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation. In: 3rd International Conference on Microgeneration and Associated Technologies, 2013-04-15 - 2014-04-17, Castel dell’Ovo.

Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2013) Novel orbits of Mercury and Venus enabled using low-thrust propulsion. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.

Anderson, Pamela and Macdonald, Malcolm (2013) Extension of highly elliptical Earth orbits using continuous low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (1). pp. 282-292. ISSN 1533-3884

Anderson, Pamela and Macdonald, Malcolm (2013) The Orbital Dynamics of Advanced Planetary Observation Systems. PhD thesis, Mechanical And Aerospace Engineering.

Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22.

Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2012) Extension of Martian orbits using continuous low-thrust propulsion. In: 23rd Space Flight Dynamics Symposium, 2012-10-29 - 2012-11-02.

Abid, Muhammad and Parvez, Shahid and Nash, David and Fawad, Hassan (2012) 3 Dimensional simulation of stationary gas tungsten arc welding of L-shape, V-shape and open-corner joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1354-1368. ISSN 2041-2975

Azvedo, B.M.C. and Oliveira, Monica and Pinho, F.T. (2012) Estudo numerico da hemodinâmica em modelos simplificados de aneurismas saculares cerebrais. In: VIII Congresso Português de Neuradiologia, 2012-05-25 - 2012-05-26.

Aranjo, Brendan Savio and Hughes, Ben Richard and Chaudry, Hassam Nasarullah (2012) Performance investigation of ground cooling for the airbus A380 in the United Arab Emirates. Applied Thermal Engineering, 36 (1). pp. 87-95. ISSN 1359-4311

Afonso, A.M. and Oliveira, Monica and Oliveira, P.J. and Alves, M.A. and Pinho, F.T.; Petrova, Radostina, ed. (2012) The finite-volume method in computational rheology. In: Finite-Volume Methods - Powerful Means of Engineering Design. In-Tech Open Publishers, Ch 7, pp 141-170. ISBN 978-953-51-0445-2

Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2012) High Deborah-number flows around a confined cylinder. In: 17th International Workshop on Numerical Methods for Non-Newtonian Flows, IWNMNNF 2012, 2012-03-25 - 2012-03-28.

Anderson, Pamela and Macdonald, Malcolm; (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: Spaceflight Mechanics 2012. Advances in Astronautical Sciences, 143 . Univelt Inc, pp. 2305-2324. ISBN 978-0-87703-581-7

Anderson, Pamela and Macdonald, Malcolm (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02.

An, Hongyan and Zhang, Chuhua and Meng, Jian-Ping and Zhang, Yonghao (2012) Analytical solution of axi-symmetrical lattice Boltzmann model for cylindrical Couette flows. Physica A: Statistical Mechanics and its Applications, 391 (1-2). pp. 8-14. ISSN 0378-4371

Antoine, C. and Dumazer, G. and Nowakowski, B. and Lemarchand, A. (2012) Nonlinear hydrodynamic corrections to supersonic F-KPP wave fronts. Physica D: Nonlinear Phenomena, 241 (5). pp. 461-471. ISSN 0167-2789

Alves, M.A. and Oliveira, Monica (2011) Microfluidic flows of non-Newtonian fluids. In: CFTC Seminar Series, Centro de Física Teórica e Computacional, University of Lisbon, 2011-11-08 - 2011-11-08.

Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2011) Dynamics of high-Deborah -number flows around a confined cylinder. In: 83rd Annual Meeting of the Society of Rheology, 2011-10-09 - 2011-10-13.

Avanzini, Giulio and Minisci, Edmondo (2011) Evolutionary design of a full-envelope full-authority flight control system for an unstable high-performance aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (10). pp. 1065-1080. ISSN 0954-4100

Ahmad, Abdul Ossman and Maddock, Christie and Scanlon, Thomas and Brown, Richard (2011) Prediction of the aerodynamic performance of re-usable single stage to orbit vehicles. In: Space Access 2011, 2011-09-21 - 2011-09-23.

Abid, Muhammad and Khan, Kamran Ahmed and Chatta, Javed Ahmad and Nash, David (2011) Leakage analysis of gasketed flange joints under combined internap pressure and thermal loading. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.

Ahmad, Abdul Ossman and Scanlon, Thomas and Reese, Jason (2011) Capturing shock waves using an open-source direct simulation Monte Carlo code. In: 4th European Conference for Aero-Space Sciences, EUCASS, 2011-07-04 - 2011-12-08.

Arbon, Ian and Brown, Colin and Fox, Tim and Knox, Andrew and Quail, Francis (2011) Scottish Energy 2020? [Report]

Avanzini, Giulio and Bernardo, Luca and Giuletti, Fabrizio and Minisci, Edmondo (2011) Optimal rotation sequences in presence of constraints on admissable rotation axes. Journal of Guidance, Control and Dynamics, 34 (2). pp. 554-563. ISSN 1533-3884

Anderson, Pamela and Macdonald, Malcolm; (2011) Extension of the Molniya orbit using low-thrust propulsion. In: Spaceflight Mechanics 2011. Advances in the Astronautical Sciences, 140, Part . Univelt Inc, USA, pp. 1943-1962. ISBN 978-0-87703-569-5

Abid, Muhammad and Nash, David and Parvez, Shahid and Fawad, Hassan (2011) Simulation of stationary GTAW process using argon as shielding gas : effect of electrode angle and tip angles in butt welding. In: 8th International Bhurban Conference on Applied Science and Technology, IBCAST08, 2011-01-10 - 2011-01-13.

Abid, M. and Awan, A.W. and Nash, David (2010) Performance of a nongasketed flange joint combined internal pressure and bending loading. Journal of Engineering Mechanics, 136 (12). pp. 1519-1527.

Anderson, Pamela and Macdonald, M. (2010) Extension of earth orbits using low-thrust propulsion. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.

Avanzini, Giulio and Minisci, Edmondo (2010) Evolutionary design of a full–envelope flight control system for an unstable fighter aircraft. In: IEEE Congress on Evolutionary Computation (CEC) 2010, 2010-07-18.

Arlemark, Erik J. and Dadzie, S. Kokou and Reese, Jason M. (2010) An extension to the Navier-Stokes equations to incorporate gas molecular collisions with boundaries. Journal of Heat Transfer, 132 (4). 041006-1-041006-8. ISSN 0022-1481

Abdulrahman, G.H. and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25.

Alexander, L.A. and Wood, J. (2009) A study of the low-cycle fatigue failure of a galvanised steel lighting column. Engineering Failure Analysis, 16 (7). pp. 2153-2162. ISSN 1350-6307

Abid, Muhammad and Nash, David (2009) Design optimization and analysis techniques. VDM Verlag, Saarbrücken, Germany. ISBN 9783639197334, 363919733X

Ahlin, G.A. and Brown, R.E. (2009) Wake structure and kinematics in the vortex ring state. Journal of the American Helicopter Society, 54 (3). 032003. ISSN 0002-8711

Alves, M.A. and Sousa, P.C. and Soulages, J. and McKinley, G.H. and Oliveira, Monica (2009) Purely-elastic flow asymetries in T-shaped microchannels. In: Congreso de Métodos Numéricos en Ingeniería, 2009-06-29 - 2009-07-02.

Arlemark, E.J. and Reese, J.M. (2009) Investigating the effect of solid boundaries on the gas molecular mean-free-path. In: 7th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2009, 2009-06-22 - 2009-06-24.

Abid, Muhammad and Nash, David (2009) Stamina of a non-gasketed flange joint under combined internal pressure, axial and bending loading : an experimental study. Journal of Pressure Vessel Technology, 131 (3). 031203-031210. ISSN 0094-9930

Arlemark, E.J. and Dadzie, S.K. and Reese, J.M. (2008) A Navier-Stokes model incorporating the effects of near-wall molecular collisions with applications to micro gas flows. In: 1st European Conference on Microfluidics, Microflu'08, 2008-12-10 - 2008-12-12.

Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Potential field based navigation for planetary rovers using internal states. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.

Abid, M. and Awan, A. W. and Nash, D. H. (2008) Stamina of a non-gasketed flange joint under combined internal pressure and axial loading. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222 (E3). pp. 143-155. ISSN 0954-4089

Arebi, Bashir H. and Dempster, W. (2008) Bubble formation at two adjacent submerged orifices in inviscid fluids. Journal of Engineering Research, 10. pp. 33-48. ISSN 1726-6009

Arlemark, E.J. and Dadzie, S.K. and Reese, J.M.; (2008) An extension to the Navier-Stokes-Fourier equations by considering molecular collisions with boundaries. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 95-102. ISBN 978-0-7918-4834-0

Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Using internal states and swarming behaviours to enhance the performance of swarm robots. In: Bridging the Gap, University of Strathclyde Research Day, BTG 2008, 2008-06-28.

Arndt, Ulli and Beausoleil-Morrison, Ian and Brouwer, Jack and Dorer, Viktor and Ferguson, Alex and Griffith, Brent and Kelly, Nick and Klobut, Krzysztof and Knight, Ian and Lie, Bernt and Mauch, Wolfgang and Peeters, Leen and Manning, Marianne and di Pietra, Biagio and Ribberink, Hajo and Roselli, Carlo and Sasso, Maurizio and Sibilio, Sergio and Swinton, Mike and Tzscheutschler, Peter and Weber, Andreas (2008) An Experimental and Simulation-based Investigation of the Performance of Small-scale Fuel Cell and Combustion-based Cogeneration Devices Serving Residential Buildings : Final Report of Annex 42 of the International Energy Agency's Energy Conservation in Buildings and Community Systems Programme. [Report]

Arndt, Ulli and Beausoleil-Morrison, Ian and Davis, Mark and D'haeseleer, William and Dorer, Viktor and Entchev, Evgeuniy and Ferguson, Alex and Gusdorf, John and Kelly, Nick and Manning, Marianne and Peeters, Leen and Sasso, Maurizio and Schreiber, Daniel and Sibilio, Sergio and Siemens, Kathleen and Swinton, Mike (2007) Experimental Investigation of Residential Cogeneration Devices and Calibration of Annex 42 Models : A Report of Subtask B of FC+COGEN-SIM The Simulation of Building-Integrated Fuel Cell and Other Cogeneration Systems. [Report]

Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, Colin; (2007) Swarm potential fields with internal agent states and collective behaviour. In: Proceedings of the 10th British Conference on Mobile Robotics, Towards Autonomous Robotic Systems Conference, TAROS2007. Elsevier Science, pp. 90-96.

Affrossman, S. and Banks, W.M. and Comrie, R. and Hayward, D. and Pethrick, R.A.; (2007) Dielectric analysis of ageing structural adhesives. In: Proceedings of the 30th Annual Meeting of the Adhesion Society. Adhesion Society.

Antonov, Maksim and Stack, Margaret and Hussainova, Irina (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian Academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1736-7530

Abid, Muhammad and Nash, David (2006) Relaxation behaviour of a gasketed and non-gasketed bolted flanged pipe joint - A comparative study. WSEAS Transactions on Applied and Theoretical Mechanics, 1 (2). pp. 239-246. ISSN 1991-8747

Abid, Muhammad and Nash, David (2006) Structural strength: gasketed Vs non-gasketed flange joint under bolt up and operating condition. International Journal of Solids and Structures, 43 (14-15). pp. 4616-4629. ISSN 0020-7683

Aziz, A. and Rhodes, J. and Macdonald, M. and Nash, D.H.; (2006) A detailed examination of interactive buckling in plain channel sections. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.

Abid, Muhammad and Nash, David (2005) FMEA of gasketed and non-gasketed bolted flanged pipe joints. Engineering Integrity, 17 (1). pp. 14-21. ISSN 1365-4101

Afendi, M. and Banks, W.M. and Kirkwood, D. (2005) Bubble free resin for infusion process. Composites Part A: Applied Science and Manufacturing, 36 (6). pp. 739-746. ISSN 1359-835X

Antonov, Maksim and Stack, M.M. and Hussainova, Irina (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07.

Abid, Muhammad and Nash, David (2004) Stress variation in flange of a non-gasketed flanged pipe joint during bolt up and operating conditions. In: 4th International Conference on Advanced Engineering Design, 2004-09-05 - 2004-09-08.

Armstrong, G.S. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. Part 2 - Examination of the failure process and effects of drying. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (3). pp. 183-192. ISSN 1464-4207

Afendi, M. and Banks, W.M. and Kirkwood, D. (2004) Separating bubbles by superficial capillary flow. In: The 7th International Conference on Flow Processes in Composite Materials, 2004-07-12 - 2004-07-14.

Argiriou, A.A. and Bellas-Velidis, I. and Kummert, M. and Andre, P. (2004) A neural network controller for hydronic heating systems of solar buildings. Neural Networks, 17 (3). pp. 427-440. ISSN 0893-6080

Abid, Muhammad and Nash, David (2004) A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions. International Journal of Pressure Vessels and Piping, 81 (1). pp. 67-74. ISSN 0308-0161

Abo-Elnor, Mootaz and Hamilton, R. and Boyle, James (2004) Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis. Soil and Tillage Research, 75 (1). pp. 61-73. ISSN 0167-1987

Alsop, S. and McLean, R.F. and Fleming, J.S.; (2004) Defeating Nyquist. In: Vibrations in Rotating Machinery (IMechE). IMechE conference transactions (2004-2). John Wiley & Sons Inc., pp. 281-290. ISBN 1860584470

Afendi, M. and Banks, W.M. and Kirkwood, D.; Summerscales, John, ed. (2003) The means to void content reduction in vacuum infusion process. In: Proceedings of the ACMC/SAMPE Conference on Marine Composites : Sherwell Centre, University of Plymouth, 11-12 September 2003. Advanced Composites Manufacturing Centre, School of Engineering, University of Plymouth, Plymouth, UK. ISBN 1870918029

Andre, P. and Kelly, N.J. and Boreaux, J.J. and Lacote, P. and McAdam, C.P. (2003) Different approaches for the simulation of an experimental building hosting a climate chamber devoted to artificial fog production. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14.

Abo-Elnor, Mootaz and Hamilton, R. and Boyle, James (2003) 3D Dynamic analysis of soil-tool interation using the finite element method. Journal of Terramechanics, 40 (1). pp. 51-62. ISSN 0022-4898

Abid, Muhammad and Nash, David (2003) Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions. International Journal of Pressure Vessels and Piping, 80 (12). pp. 831-841. ISSN 0308-0161

Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2003) Investigation of the solvent uptake in adhesively bonded CFRP joints using non-destructive dielectric and destructive mechanical techniques. In: 14th International Conference on Composite Materials, 2003-07-14 - 2003-07-18.

Abid, Muhammad and Nash, David and Webjorn, Jan (2002) Risk assessment studies of gasketed and non-gasketed bolted pipe joints. In: Proceedings of the 4th ASME International Pipelines Conference, 2002-10-01.

Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L.; Mittal, K.L, ed. (2002) Monitoring the solvent uptake in adhesive bonded joints using a novel non-destructive technique by applying high frequency dielectrics. In: Adhesive joints. VSP International Science Publishers. ISBN 9789067643719

Alexander, D. and McInnes, C.R. and Angelopoulos, V. and Sandeman, A.W. and Macdonald, M.; El-Genk, Mohammed S., ed. (2002) Geosail: A novel solar sail mission concept for geospace. In: Proceeding of the AIP Space Technology and Appications International Forum/Staif 2002, Innovative Transportation Systems and Beyond. American Institute of Physics, pp. 305-312. ISBN 1-56396-980-7

Alexander, D. and Sandman, A.W. and McInnes, C.R. and Macdonald, M. and Ayton, J. and Murphy, N. and Angelopoulos, V. (2002) GeoSail: a novel magnetospheric space mission utilizing solar sails. In: 53rd International Astronautical Congress, 2002-10-10 - 2002-10-19.

Adzima, L.J. (2001) Moldable pellet based on a combination of natural fibers and thermoplastic polymer. World Intellectual Property Organization Patent - WO/2001/083598.

Armstrong, B. and Beveridge, J.R. and Born, F. and Bronsdon, C. and Clarke, J.A. and Johnstone, C. and Macrae, I.M. and McDonald, J.R. (2001) Strategy and technology deployment for achieving 100% renewable energy supply for the island of Islay. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16.

Abo-Elnor, Mootaz and Boyle, J.T. and Hamilton, R. (2001) Soil-tool interface experimental evaluation and constitutive models. In: 18th Canadian Congress of Applied Mechanics, Newfoundland., 2001-06-03 - 2001-06-07.

Abid, Muhammad and Nash, D.H. and Webjorn, Jan; Bache, M.R. and Blackmore, P.A. and Draper, J. and Edwards, J.H. and Roberts, P. and Yates, J.R., eds. (2000) The stamina of non-gasketed, flanged pipe connections. In: Fatigue 2000 - Fatigue and Durability Assessment of Materials, Components and Structures: Proceedings of the Fourth International Conference of the Engineering Integrity Society. EMAS Publishing, pp. 575-584. ISBN 1 901537 16 1

Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093

Abed, A. and Smith, A.C. and Hendry, A. (1995) Interfacial behaviour in ceramic-metal composites. Silicates Industriels, 60 (11-12). pp. 313-319. ISSN 0037-5225

B

Bandivadekar, Deep and Minisci, Edmondo (2020) Modelling and simulation of transpiration cooling systems for atmospheric re-entry. Aerospace, 7 (7). 89. ISSN 2052-451X

Barbera, Daniele and Chen, Haofeng (2020) On the plastic strain accumulation in notched bars during high-temperature creep dwell. Journal of Mechanics, 36 (2). pp. 167-176. ISSN 1727-7191

Brownlie, F. and Giourntas, L. and Hodgkiess, T. and Palmeira, I. and Odutayo, O. and Galloway, A. M. and Pearson, A. (2020) Effect of cathodic protection methods on ferrous engineering materials under corrosive wear conditions. Corrosion Engineering Science and Technology. ISSN 1743-2782

Black, Scott and Ritos, Konstantinos and Maclean, Craig and Brodie, Robbie and Kazakidi, Asimina (2020) Blood flow analysis of the aortic arch using computational fluid dynamics in a coupled 3D-0D framework. In: 23rd Annual Meeting Scottish Cardiovascular Forum 2020, 2020-02-01 - 2020-02-01, Strathclyde Institute for Pharmacy & Biomedical Sciences, University of Strathclyde.

Berquand, Audrey and Moshfeghi, Yashar and Riccardi, Annalisa (2020) Space mission design ontology : extraction of domain-specific entities and concepts similarity analysis. In: AIAA SciTech Forum 2020, 2020-01-06 - 2020-01-10.

Barnes, Andrew and Hughes, Ben (2019) Determining the impact of VAWT farm configurations on power output. Renewable Energy, 143. pp. 1111-1120. ISSN 0960-1481

Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2019) Investigation of the stresses and interaction effects of nozzle-cylinder intersections when subject to multiple external loads. In: ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 3 . ASME, USA. ISBN 9780791858943

Berquand, Audrey and McDonald, Iain and Riccardi, Annalisa and Moshfeghi, Yashar (2019) The automatic categorisation of space mission requirements for the Design Engineering Assistant. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.

Bhattarai, S. and Ziebart, M. and Allgeier, S. and Grey, S. and Springer, T. and Harrison, D. and Li, Z. (2019) Demonstrating developments in high-fidelity analytical radiation force modelling methods for spacecraft with a new model for GPS IIR/IIR-M. Journal of Geodesy, 93 (9). pp. 1515-1528. ISSN 0949-7714

Bonser, Sam and Hughes, Ben Richard and Calautit, John Kaiser (2019) Investigation of the impact of roof configurations on the wind and thermal environment in football stadiums in hot climates. International Journal of Ventilation. pp. 1-20. ISSN 2044-4044

Black, Scott and Ritos, Konstantinos and Maclean, Craig and Brodie, Robbie and Kazakidi, Asimina (2019) Perfusion optimisation for vascular grafts design used in the treatment of aortic disease. In: Terumo Aortic Academic Collaborations Conference, 2019-09-12 - 2019-09-12, University of Strathclyde.

Bonetti, Valentina; Stanek, Wojciech and Gladysz, Pawel and Werle, Sebastian and Adamczyk, Wojciech, eds. (2019) Developing building exergy methods through collaboration in the open-data era. In: Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Silesian University of Technology, Wroclaw, p. 251. ISBN 978-83-61506-51-5

Baker, T. N. and Rahimi, S. and Wei, B. and He, K. and McPherson, N. A. (2019) Evolution of microstructure during double-sided friction stir welding of microalloyed steel. Metallurgical and Materials Transactions A, 50 (6). 2748–2764. ISSN 1073-5623

Berquand, Audrey and Murdaca, Francesco and Riccardi, Annalisa and Soares, Tiago and Gerené, Sam and Brauer, Norbert and Kumar, Kartik; (2019) Artificial intelligence for the early design phases of space missions. In: 2019 IEEE Aerospace Conference. IEEE, USA. ISBN 978-1-5386-6854-2

Berquand, Audrey and Murdaca, Francesco and Riccardi, Annalisa and Soares, Tiago and Gerené, Sam and Brauer, Norbert and Kumar, Kartik (2018) Towards an artificial intelligence based design engineering assistant for the early design of space missions. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.

Borg, Matthew K. and Lockerby, Duncan A. and Ritos, Konstantinos and Reese, Jason M. (2018) Multiscale simulation of water flow through laboratory-scale nanotube membranes. Journal of Membrane Science. ISSN 0376-7388

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L.; (2018) A simple chemical approach to regenerating strength of thermally damaged glass fibre for reuse in composites. In: ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, GRC. ISBN 9781510896932

Bryce, David and Yang, Liu and Thomason, James (2018) An investigation of fibre sizing on the interfacial strength of glass-fibre epoxy composites. In: ECCM18 - 18th European Conference on Composite Materials, 2018-06-24 - 2018-06-28.

Bonetti, Valentina; (2018) Inside out : a shift in perspective for building exergy analysis. In: ECOS 2018. University of Minho, PRT. ISBN 978-972-99596-4-6

Brownlie, F. and Anene, C. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2018) Comparison of hot wire TIG stellite 6 weld cladding and lost wax cast stellite 6 under corrosive wear conditions. Wear, 404-405. pp. 71-81. ISSN 0043-1648

Benghalia, G. and Rahimi, S. and Wood, J. and Coules, H. and Paddea, S. (2018) Multiscale measurements of residual stress in a low alloy carbon steel weld clad with IN625 superalloy. Materials Performance and Characterization, 7 (4). ISSN 2165-3992

Bitharas, I. and McPherson, N. A. and McGhie, W. and Roy, D. and Moore, A. J. (2018) Visualisation and optimisation of shielding gas coverage during gas metal arc welding. Journal of Materials Processing Technology, 255. pp. 451-462. ISSN 0924-0136

Baker, T. N. (2018) Titanium microalloyed steels. Ironmaking and Steelmaking. ISSN 1743-2812

Benedetti, Gianluca and Viola, Nicole and Minisci, Edmondo and Falchi, Alessandro and Vasile, Massimiliano; Vasile, Massimiliano and Minisci, Edmondo and Summerer, Leopold and Mcginty, Peter, eds. (2018) Low-fidelity modelling for aerodynamic characteristics of re-entry objects. In: Stardust Final Conference. Astrophysics and Space Science Proceedings . Springer Netherlands, Cham, pp. 247-264. ISBN 978-3-319-69956-1

Bashir, S.T. and Yang, L. and Anderson, R. and Tang, P.L. and Liggat, J.J. and Thomason, J.L. (2017) A simple chemical approach to regenerating the strength of thermally damaged glass fibre. Composites Part A: Applied Science and Manufacturing, 102. pp. 76-87. ISSN 1359-835X

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L. (2017) Kinetics of dissolution of glass fibre in hot alkaline solution. Journal of Materials Science. ISSN 0022-2461

Bisht, Manju and Haeri, Sina and Patil, Dhiraj V. (2017) Fluid flow in wall-driven enclosures with corrugated bottom. Computers and Fluids, 152. pp. 1-13. ISSN 0045-7930

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua and Xuan, Fuzhen (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139 (5). 051101. ISSN 0094-9930

Bonetti, Valentina; Nižetić, Sandro and Šolić, Petar and Milanović, Željka, eds. (2017) Dynamic exergy analysis for the built environment : fixed or variable reference? In: Proceedings of the 9th Exergy, Energy and Environment Symposium. FESB, University of Split, Split, Croatia, pp. 924-939. ISBN 9789532900699

Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A. M. (2017) Effect of nitriding on the corrosive wear performance of a single and double layer Stellite 6 weld cladding. Wear, 376-377 (B). pp. 1279-1285. ISSN 0043-1648

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2017) Advances on creep-fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures. ISSN 8756-758X (In Press)

Ben Sassi, Mokhtar and Kaddeche, Slim and Lappa, Marcello and Millet, Séverine and Henry, Daniel and Ben Hadid, Hamda (2017) On the effect of thermodiffusion on solute segregation during the growth of semiconductor materials by the vertical Bridgman method. Journal of Crystal Growth, 458. pp. 154-165. ISSN 0022-0248

Bonetti, Valentina and Kokogiannakis, Georgios (2017) Dynamic exergy analysis for the thermal storage optimisation of the building envelope. Energies, 10 (1). 95. ISSN 1996-1073

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2017) A novel simulation for the design of a low cycle fatigue experimental testing programme. Computers and Structures, 178. 105–118. ISSN 0045-7949

Benghalia, Gladys and Rahimi, Salah and Wood, James; Holden, Thomas M. and Muránsky, Ondrej and Edwards, Lyndon, eds. (2016) Measurements of surface and near-surface residual stress in 4330 low alloy carbon steel weld clad components. In: Residual Stresses 2016. Materials Research Forum, AUS, pp. 259-264. ISBN 978-1-94529116-6

Blue, Robert and Thomson, Neil and Taylor, Stewart J. and Fletcher, Ashleigh J. and Skabara, Peter J. and Uttamchandani, Deepak (2016) Miniature nitro and peroxide vapor sensors using nanoporous thin films. IEEE Sensors Journal, 16 (24). pp. 8767-8774. ISSN 1530-437X

Bonetti, V. and Robazza, P. (2016) The irreversible evolution of buildings. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 167-175. ISSN 1755-7445

Burn, D. T. and Harper, L. T. and Johnson, M. and Warrior, N. A. and Nagel, U. and Yang, L. and Thomason, J. (2016) The usability of recycled carbon fibres in short fibre thermoplastics : interfacial properties. Journal of Materials Science, 51 (16). pp. 7699-7715. ISSN 1573-4803

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-140. pp. 159-172. ISSN 0308-0161

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138 (4). 041403. ISSN 0094-9930

Brownlie, F. and Hodgkiess, T. and Pearson, A. and Galloway, A.M. (2016) Corrosive wear behaviour of various stainless steel alloys and a Stellite 6 weld cladding. In: 17th Nordic Symposium on Tribology, 2016-06-14 - 2016-06-17. (In Press)

Bashir, S. and Yang, L. and Anderson, R. and Basri, N. B. and Saez Rodriguez, E. and Liggat, J. J. and Thomason, J. (2016) A cost-effective chemical approach to retaining and regenerating the strength of thermally recycled glass fibre. In: The 17th European Conference on Composite Materials (ECCM17), 2016-06-26 - 2016-06-30, Internationales Congress Center München. (In Press)

Benghalia, G. and Wood, J. (2016) Material and residual stress considerations associated with the autofrettage of weld clad components. International Journal of Pressure Vessels and Piping, 139-140. pp. 146-158. ISSN 0308-0161

Bitharas, I. and Campbell, S.W. and Galloway, A.M. and McPherson, N.A. and Moore, A.J. (2016) Visualisation of alternating shielding gas flow in GTAW. Materials and Design, 91. pp. 424-431. ISSN 0261-3069

Barbera, D. and Chen, H.F. and Liu, Y.H. (2015) On the creep fatigue behavior of Metal Matrix Composites. Procedia Engineering, 130. pp. 1121-1136. ISSN 1877-7058

Benghalia, G. and Wood, J. (2015) Autofrettage of weld clad components. Procedia Engineering, 130 (2015). pp. 453-465. ISSN 1877-7058

Barbera, Daniele and Laurenzi, Susanna (2015) Nonlinear buckling and folding analysis of a storable tubular ultrathin boom for nanosatellites. Composite Structures, 132. pp. 226-238. ISSN 0263-8223

Barbera, Daniele and Chen, Haofeng (2015) Creep rupture assessment by a robust creep data interpolation using the linear matching method. European Journal of Mechanics - A/Solids, 54. pp. 267-279. ISSN 0997-7538

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2015) On the modified monotonic loading concept for the calculation of the cyclic j-integral. Journal of Pressure Vessel Technology, 137 (5). 051406. ISSN 0094-9930

Battista, Emmanuele and Dell' Agnello, Simone and Esposito, Giampiero and Di Fiore, Luciano and Simo, Jules and Grado, Aniello (2015) Earth-Moon Lagrangian points as a testbed for general relativity and effective field theories of gravity. Physical Review D: Particles, Fields, Gravitation and Cosmology, 92. 064045. ISSN 1550-2368

Biggs, James (2015) A quaternion-based attitude tracking controller for robotic systems. In: IMA Conference on Mathematics of Robotics, 2015-09-09 - 2015-09-11, University of Oxford, St Anne's College.

Baillie, P. and Campbell, S. W. and Galloway, A. M. and Cater, S. R. and McPherson, N. A. (2015) Friction stir welding of 6mm thick carbon steel underwater and in air. Science and Technology of Welding and Joining, 20 (7). pp. 585-593. ISSN 1362-1718

Borggräfe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin R. (2015) Shape control of slack space reflectors using modulated solar pressure. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2179). 0119. ISSN 1471-2962

Bell, Andrew M and Brown, Richard E and Mulheran, Paul A (2015) Multi-scale chemistry modelling for spacecraft atmospheric re-entry. In: Faculty of Engineering Research Presentation Day 2015, 2015-06-24 - 2015-06-24. (Unpublished)

Battista, Emmanuele and Dell' Agnello, Simone and Esposito, Giampiero and Simo, Jules (2015) Quantum effects on Lagrangian points and displaced periodic orbits in the Earth-Moon system. Physical Review D: Particles, Fields, Gravitation and Cosmology, 91 (8). 084041. ISSN 1550-2368

Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2015) A hybrid molecular-continuum method for unsteady compressible multiscale flows. Journal of Fluid Mechanics, 768. pp. 388-414. ISSN 0022-1120

Baker, Neville (2015) The role of zirconium in microalloyed steels. Materials Science and Technology, 31 (3). pp. 265-294. ISSN 0267-0836

Borggrafe, Andreas and Heiligers, Jeannette and McInnes, Colin and Ceriotti, Matteo (2015) Attitude dynamics of classical dumbbell problem with solar radiation pressure. Journal of Guidance, Control and Dynamics, 38 (1). pp. 168-173. ISSN 1533-3884

Baker, Thomas (2015) Microalloyed steels. Ironmaking and Steelmaking. ISSN 1743-2812

Brodie, Robbie (2014) Computer-implemented method of simulating performance of e.g. endovascular stent-graft, involves partitioning model such that material models simulate material behaviour in units of object model of super elastic tension and compression. G06F-019/00.

Brown, Richard (2014) The future of air travel : Dinner in Sydney, London in time for 'The X-Factor'? The Washington Post, Washington DC.

Biggs, James and Horri, Nadjim (2014) An exponentially fast attitude tracking controller on the rotation group. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Attitude control of large gossamer spacecraft using surface reflectivity modulation. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Borggrafe, Andreas and Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2014) Distributed reflectivity solar sails for extended mission applications. In: 3rd International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13.

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 8 (8). pp. 651-655. ISSN 2010-3778

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2014) On the cyclic J-integral of a 3D semi elliptical surface crack. In: ASME Pressure Vessels and Piping Conference 2014, 2014-07-20 - 2014-07-24, California.

Borg, Simon P. and Kelly, Nicolas J. and Buhagiar, Vincent; (2014) Energetic, environmental and economic modelling of a solar-assisted residential micro-trigeneration system in a Mediterranean climate. In: ASHRAE 2014 Annual Conference. American Society of Heating, Refrigerating and Air-conditioning Engineering (ASHRAE), USA. ISBN 9781936504770

Burn, D.T. and Harper, Lee and Johnson, M. and Warrior, N.A. and Yang, Liu and Thomason, James (2014) The influence of coupling agent, fibre sizing and matrix degradation on the interfacial shear strength between carbon fibre and polypropylene. In: 16th European Conference on Composite Materials, 2014-06-22 - 2014-06-26, Barceló Renacimiento Hotel.

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Inverse problem for shape control of flexible reflectors using distributed solar pressure. Smart Materials and Structures, 23 (7). 075026. ISSN 0964-1726

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Optical control of solar sails using distributed reflectivity. In: AIAA SciTech 2014, 2014-01-13 - 2014-01-17, Washington.

Babac, Gulru and Reese, Jason M. (2014) Molecular dynamics simulation of classical thermosize effects. Nanoscale and Microscale Thermophysical Engineering, 18 (1). pp. 39-53. ISSN 1556-7265

Bradford, R.A.W. and Ure, James and Chen, Haofeng (2014) The Bree problem with different yield stresses on-load and off-load and application to creep ratcheting. International Journal of Pressure Vessels and Piping, 113. ISSN 0308-0161

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin; Macdonald, Malcolm, ed. (2014) Distributed reflectivity solar sails for extended mission applications. In: Advances in Solar Sailing. Springer Praxis Books - Astronautical Engineering . Springer Praxis Books, GBR, pp. 331-350. ISBN 9783642349065

Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2013) Fluid simulations with atomistic resolution : a hybrid multiscale method with field-wise coupling. Journal of Computational Physics, 255. pp. 149-165. ISSN 0021-9991

Borg, S.P. and Kelly, N.J. (2013) High resolution performance analysis of micro-trigeneration in an energy-efficient residential building. Energy and Buildings, 67. pp. 153-165. ISSN 0378-7788

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) A higher order control volume based finite element method to prodict the deformation of heterogeneous materials. Computers and Structures, 129. pp. 54-62. ISSN 0045-7949

Biggs, James and Maclean, Craig David and Caubet, Albert (2013) Heteroclinic optimal control solutions for attitude motion planning. In: Australian Control Conference, ACC 2013, 2013-11-04 - 2013-11-05.

Beyer, V. and Campbell, Stuart and Ramsey, Gemma and Galloway, Alexander and Moore, A.J. and McPherson, Norman (2013) Systematic study of effect of cross-drafts and nozzle diameter on shield gas coverage. Science and Technology of Welding and Joining, 18 (8). pp. 652-660. ISSN 1362-1718

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin; Badescu, Viorel, ed. (2013) Usage of asteroid resources for space-based geoengineering. In: Asteroids. Springer Berlin Heidelberg, pp. 581-604. ISBN 978-3-642-39243-6

Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2013) A hybrid molecular-continuum simulation method for incompressible flows in micro/nanofluidic networks. Microfluidics and Nanofluidics, 15 (4). pp. 541-557. ISSN 1613-4982

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2013) Shape-changing solar sails for novel mission applications. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Barclay, C. J. and Campbell, S. W. and Galloway, A. M. and McPherson, N. A. (2013) Artificial neural network prediction of weld distortion rectification using a travelling induction coil. International Journal of Advanced Manufacturing Technology, 68 (1-4). pp. 127-140. ISSN 0268-3768

Boyle, James (2013) A re-assessment of elastic follow-up in high temperature piping. International Journal of Pressure Vessels and Piping, 108-109. pp. 7-12. ISSN 0308-0161

Boyle, James (2013) The role of uncertainty in creep mechanics. In: 4th Canadian Conference on Nonlinear Solid Mechanics, 2013-07-23 - 2013-07-26.

Biggs, James (2013) Quadratic Hamiltonians on non-Euclidean spaces of arbitrary constant curvature. In: European Control Conference, ECC 2013, 2013-07-17 - 2013-07-19.

Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick; (2013) Future Needs for Tribo-Corrosion Research and Testing. In: Tribo-Corrosion. ASTM International, USA, pp. 1-13.

Bewick, Russell and Bewick, Charlotte and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Heliotropic dust rings for Earth climate engineering. Advances in Space Research, 51 (7). pp. 1132-1144. ISSN 0273-1177

Brindley, Joseph and Counsell, John and Zaher, Obadah Samir and Pearce, John G (2013) Design and simulation of a non-linear, discontinuous, flight control system using rate actuated inverse dynamics. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 227 (4). pp. 632-646. ISSN 0954-4100

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2013) Large morphing spacecraft for flexible science missions. In: SET for Britain 2013, 2013-03-18 - 2013-03-18.

Boyle, James; Altenbach, Holm and Kruch, Serge, eds. (2013) Some consequences of stress range dependent constitutive models in creep. In: Advanced Structured Materials. Springer-Verlag, FRA, pp. 77-86.

Burt, Graeme and Kelly, Nicolas and Entchev, Evgueniy and Hammond, Geoffrey P (2013) Microgeneration and related energy technologies and practices for low-carbon buildings : Guest Editorial. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227. pp. 3-7. ISSN 0957-6509

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2013) A multiscale method for micro/nano flows of high aspect ratio. Journal of Computational Physics, 233. pp. 400-413. ISSN 0021-9991

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The micropolar elastic behaviour of model macroscopically heterogeneous materials. International Journal of Solids and Structures, 50 (1). 246–255. ISSN 0020-7683

Boyle, James (2012) The effect of material models on elastic follow-up. Journal of Pressure Vessel Technology, 134 (6). 061210. ISSN 0094-9930

Bennet, Derek James and McInnes, Colin (2012) Pattern transition in spacecraft formation flying using bifurcating potential field. Aerospace Science and Technology, 23 (1). pp. 250-262. ISSN 1270-9638

Borg, Simon Paul and Kelly, Nicolas (2012) The development and calibration of a generic dynamic absorption chiller model. Energy and Buildings, 55. pp. 533-544. ISSN 0378-7788

Bewick, R. and Sanchez Cuartielles, J.P. and McInnes, C.R. (2012) Gravitationally bound geoengineering dust shade at the inner Lagrange point. Advances in Space Research, 50 (10). pp. 1405-1410. ISSN 0273-1177

Borggrafe, Andreas and Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Coupled orbit and attitude dynamics of a reconfigurable spacecraft with solar radiation pressure. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.

Babac, Gulru and Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Thermal transpiration of nanoscale gas flow. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.

Babaç, Gulru and Ritos, Konstantinos and Reese, Jason M; (2012) Molecular dynamics simulations of mass transfer due to a temperature gradient. In: Proceedings of CHT-12. Begell House, Danbury, CT..

Boyle, James (2012) Stress relaxation and elastic follow-up using a stress range-dependent constitutive model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1472-1483. ISSN 0954-4062

Boyle, James (2012) A re-assessment of elastic follow-up in high temperature piping. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23.

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) The feasibility of using an L1 positioned dust cloud as a method of space-based geoengineering. Advances in Space Research, 49 (7). pp. 1212-1228. ISSN 0273-1177

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

Biggs, James and Horri, Nadjim (2012) Optimal geometric motion planning for a spin-stabilized spacecraft. Systems and Control Letters, 61 (4). pp. 609-616. ISSN 0167-6911

Boyle, James (2012) The creep behavior of simple structures with a stress range-dependent constitutive model. Archive of Applied Mechanics, 82 (4). pp. 495-514. ISSN 0939-1533

Borggrafe, Andreas and Ohndorf, Andreas and Dachwald, Bernd and Sebolt, Wolfgang; (2012) Analysis of interplanetary solar sail trajectories with attitude dynamics. In: Advances in the Aeronautical Sciences. Univelt Inc, PRT, pp. 1553-1569.

Biggs, James and Bennet, Derek James and Dadzie, Kokou (2012) Time-delayed autosynchronous swarm control. Physical Review E, 85 (1). 016105. ISSN 1539-3755

Boyle, James (2011) The behavior of structures based on the characteristic strain model of creep. International Journal of Pressure Vessels and Piping, 88 (11-12). pp. 473-481. ISSN 0308-0161

Bennet, Derek James and McInnes, Colin and Suzuki, Masayuki and Uchiyama, Kenji (2011) Autonomous three-dimensional formation flight for a swarm of unmanned aerial vehicles. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1899-1908. ISSN 1533-3884

Brown, Richard and Scheurich, Frank (2011) Effect of dynamic stall on the aerodynamics of vertical-axis wind turbines. AIAA Journal, 49 (11). pp. 2511-2521. ISSN 0001-1452

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupling continuum hydrodynamics and molecular dynamics for one-dimensional scale-separated channel flows. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07.

Bewick, Russell and Lucking, Charlotte and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Geo-engineering using dust grains in heliotropic elliptical orbits. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Use of orbiting reflectors to decrease the technological challenges of surviving the lunar night. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Borg, Simon Paul and Kelly, Nicolas (2011) The effect of appliance energy efficiency improvements on domestic electric loads in European households. Energy and Buildings, 43 (9). pp. 2240-2250. ISSN 0378-7788

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupled continuum hydrodynamics and molecular dynamics method for multiscale simulation. In: 3rd Micro and Nano Flows Conference, MNF11, 2011-08-22 - 2011-08-24.

Biggs, James; (2011) Optimal path planning for nonholonomic robotics systems via parametric optimisation. In: Lecture Notes in Computer Science. Springer, GBR. ISBN 978-3-642-23231-2

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in-phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). 041201. ISSN 0094-9930

Borg, Simon Paul and Kelly, Nicolas and Markopoulos, Anastasios and Strachan, Paul and Porteous, Colin and Sharpe, Tim (2011) Communal residential laundry washing and drying : can it provide demand-side electrical load flexibility? In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.

Biggs, J.D. and Waters, T. and McInnes, C.R.; Machado, J.A.T. and Luo, A.C.J. and Barbosa, R.S. and Silva, M.F. and Figueiredo, L.B., eds. (2011) New periodic orbits in the solar sail three-body problem. In: Nonlinear Science and Complexity. Springer, Porto, Portugal, pp. 131-138. ISBN 9789048198832

Bewick, R. and Sanchez, J.P. and McInnes, C.R. (2010) An L1 positioned dust cloud as an effective method of space-based geoengineering. In: International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01.

Bennet, Derek J. and Biggs, J.D. and McInnes, C.R. and Macdonald, M. (2010) An analysis of dissipation functions in swarming systems. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10.

Biggs, J.D. (2010) Singularities of optimal attitude motions. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10.

Borg, Matthew Karl and Macpherson, Graham and Reese, Jason (2010) Controllers for imposing continuum-to-molecular boundary conditions in arbitrary fluid flow geometries. Molecular Simulation, 36 (10). pp. 745-757. ISSN 0892-7022

Brindley, Joseph and Counsell, John and Zaher, Obadah Samir (2010) Design of a non-linear missile autopilot design using Rate Actuated Inverse Dynamics (RAID). In: AIAA Guidance, Navigation and Control Conference, 2010-08-02 - 2010-08-05. (Unpublished)

Brown, Blair and McInnes, C.R. and Allouis, E. (2010) Dynamic autonomous intelligent control of an asteroid lander. Journal of Aerospace Engineering, 224 (8). pp. 865-879. ISSN 0893-1321

Biggs, James and Holderbaum, William (2010) Integrable quadratic Hamiltonians on the Euclidean group of motions. Journal of Dynamical and Control Systems, 16 (3). pp. 301-317. ISSN 1079-2724

Borggrafe, Andreas and Dachwald, Bernd (2010) Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients. In: 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22.

Brindley, Joseph and Counsell, John and Pearce, John G (2010) Modelling and simulation of advanced non-linear autopilot designs. In: Grand Challenges in Modelling and Simulation Conference, 2010-07-11 - 2010-07-14.

Borg, Matthew Karl and Nicholls, William and Reese, Jason; (2010) Hybrid molecular dynamics and Navier-Stokes method in complex nanoflow geometries. In: Nanotech 2010. Taylor and Francis, CRC Press, USA. ISBN 9781439834183

Borg, Matthew Karl and Nicholls, William and Reese, Jason; (2010) MD boundary conditions for pressure gradient flows : nano-mixing and nano-droplet deformation in extensional flows. In: Nanotech 2010. Taylor & Francis, USA. ISBN 9781439834183

Brown, R.E. and Phillips, Catriona and Kim, Hyo Wan (2010) Helicopter brownout - can it be modelled? In: Royal Aeronautical Society Rotorcraft Group Conference: Operating Helicopters Safely in a Degraded Visual Environment, 2010-06-16 - 2010-06-17.

Baig, S. and McInnes, C.R. (2010) Light levitated geostationary cylindrical orbits are feasible. Journal of Guidance, Control and Dynamics, 33 (3). pp. 782-793. ISSN 1533-3884

Baker, T.N.; (2010) Laser surface modification of Ti alloys. In: Surface Engineering of Light Alloys - Aluminium, Magnesium and Titanium Alloys. Woodhead Publications, Cambridge, UK, pp. 398-443. ISBN 1845695372

Biggs, James D. and McInnes, Colin R. (2010) Passive orbit control for space-based geo-engineering. Journal of Guidance, Control and Dynamics, 33 (3). pp. 1017-1020. ISSN 1533-3884

Boyle, James (2010) Some consequences of stress range dependent constitutive models in creep. In: IUTAM Symposium on Advanced Materials Modelling for Structures (STAMM), 2010-04-23 - 2010-04-23.

Bennet, Derek J. and McInnes, C.R. (2010) Distributed control of multi-robot systems using bifurcating potential fields. Robots and Autonomous Systems, 58 (3). pp. 256-264. ISSN 0921-8890

Brown, Blair and McInnes, Colin (2010) A dynamical systems approach to micro spacecraft autonomy. In: 20th AAS/AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17.

Boyle, James (2010) Research-teaching linkages : enhancing graduate attributes - engineering and the built environment. [Report]

Badawy, Ahmed and McInnes, Colin R. (2009) Small spacecraft formation-flying using potential functions. Acta Astronautica, 65 (11-12). pp. 1783-1788. ISSN 0094-5765

Bulgheroni, M. and D'Amico, E. and Bar-Heim, S. and Carus, D. and Harrison, C.S. and Marcellini, F. (2009) The SMILING project : prevention of falls by a mechatronic training device. In: The 2nd IASTED International Conference on Telehealth and Assistive Technology, TAT 2009, 2009-11-02 - 2009-11-04. (Unpublished)

Biggs, James D. and McInnes, Colin R. (2009) Time-delayed feedback control in astrodynamics. Journal of Guidance, Control and Dynamics, 32 (6). pp. 1804-1811. ISSN 1533-3884

Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836

Baig, Shahid and McInnes, Colin R. (2009) Artificial halo orbits for low-thrust propulsion spacecraft. Celestial Mechanics and Dynamical Astronomy, 104 (4). pp. 321-335. ISSN 0923-2958

Bennet, D. J. and McInnes, C.R. (2009) Verifiable control of a swarm of unmanned aerial vehicles. Journal of Aerospace Engineering, 223 (7). pp. 939-953. ISSN 0893-1321

Biggs, James and Holderbaum, William (2009) Optimal kinematic control of an autonomous underwater vehicle. IEEE Transactions on Automatic Control, 54 (7). pp. 1623-1626. ISSN 0018-9286

Beveridge, A. J. and Wheel, M. A. and Nash, D. H. (2009) Computational modelling and experimental characterisation of heterogeneous materials. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23.

Biggs, James and McInnes, Colin R. (2009) An optimal gains matrix for time-delay feedback control. In: 2nd IFAC Conference on the Analysis and Control of Chaotic Systems (CHAOS 09), 2009-06-22 - 2009-06-24.

Biggs, James and McInnes, Colin (2009) Solar sail formation flying for deep-space remote sensing. Journal of Spacecraft and Rockets, 46 (3). pp. 670-678. ISSN 0022-4650

Borggrafe, Andreas and Quatmann, Michael and Nölke, Daniel (2009) Radiation protective structures on the base of a case study for a manned Mars mission. Acta Astronautica, 65 (9-10). pp. 1292-1305. ISSN 0094-5765

Beveridge, A. J. and Wheel, M. A. (2009) A control volume based formulation of the discrete Kirchoff triangular thin plate bending element. In: The 17th UK National Conference on Computational Mechanics in Engineering, 2009-04-06 - 2009-04-08.

Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Infield, David and Jardine, C. and Kelly, Nicolas and Leach, M. and Matian, M. and Peacock, A.D. and Staffell, I. and Sudtharalingam, S. and Woodman, B. (2009) UK Microgeneration. Part 1 : Policy and behavioural aspects. Proceedings of the ICE - Energy, 162 (1). pp. 23-36. ISSN 1751-4231

Biggs, James D. and McInnes, Colin R. and Waters, Thomas (2009) Control of solar sail periodic orbits in the elliptic three-body problem. Journal of Guidance, Control and Dynamics, 32 (1). pp. 318-320. ISSN 1533-3884

Baker, P.H. and Galbraith, G.H. and McLean, R.C. (2009) Temperature gradient effects on moisture transport in porous building materials. Building Services Engineering Research and Technology, 30 (1). pp. 37-48. ISSN 0143-6244

Biggs, James and Holderbaum, William (2008) Planning rigid body motions using elastic curves. Mathematics of Control, Signals, and Systems, 20 (4). pp. 351-367. ISSN 0932-4194

Burt, G.M. and Elders, I.M. and Galloway, S.J. and Kelly, N.J. and Tumilty, R.M. (2008) Assessment of highly distributed power systems using an integrated simulation approach. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7). pp. 657-668. ISSN 0957-6509

Baig, Shahid and McInnes, Colin R. (2008) Artificial three-body equilibria for hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics, 31 (6). pp. 1644-1655. ISSN 1533-3884

Badawy, Ahmed and McInnes, Colin R. (2008) Spacecraft formation-flying using potential functions. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.

Bennet, Derek and McInnes, Colin R. (2008) Spacecraft formation flying using bifurcating potential fields. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.

Biggs, J.D. and McInnes, C. and Waters, T. (2008) Stabilizing periodic orbits above the elliptic plane in the solar sail 3-body problem. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.

Borg, M.K. and Reese, J.M.; (2008) A hybrid particle-continuum framework. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 995-1004. ISBN 978-0-7918-4834-0

Biggs, J.D. and McInnes, C. and Waters, Thomas (2008) New periodic orbits in the solar sail restricted three body problem. In: 2nd Conference on Nonlinear Science and Complexity, 2008-07-28 - 2008-07-31.

Beyer, Denny and Kelly, Nick (2008) Modelling the behaviour of domestic micro-cogeneration under different operating regimes and with variable thermal buffering. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01.

Bennet, Derek J. and McInnes, C.R. (2008) Pattern transition in spacecraft formation flying via the artificial potential field method and bifurcation theory. In: 3rd International Symposium on Formation Flying, Missions and Technologies, 2008-04-23 - 2008-04-25.

Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836

Badawy, Ahmed and McInnes, Colin (2008) On-orbit assembly using superquadric potential fields. Journal of Guidance, Control and Dynamics, 31 (1). pp. 30-43. ISSN 1533-3884

Bookless, John and McInnes, Colin (2008) Control of Lagrange point orbits using solar sail propulsion. Acta Astronautica, 62 (2-3). pp. 159-176. ISSN 0094-5765

Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Infield, D.G. and Jardine, C. and Kelly, N.J. and Leach, M.O. and Matian, M. and Peacock, A.D. and Staffell, I. and Sudtharalingam, S. and Woodman, B. (2008) Review of UK microgeneration. Part 1 : policy and behavioural aspects. Proceedings of the ICE - Civil Engineering, 162 (1). pp. 23-36. ISSN 0965-089X

Biggs, James and Holderbaum, William (2008) Integrable Hamiltonian systems defined on the Lie groups SO(3) and SU(2) : an application to the attitude control of a spacecraft. In: 5th Wismar Symposium on Automatic Control, AUTSYM'08, 2008-09-18 - 2008-09-19.

Badawy, Ahmed (2007) On-Orbit Manoeuvring Using Superquadric Potential Fields. PhD thesis, University Of Strathclyde.

Beausoleil-Morrison, Ian and Kelly, Nick (2007) Specifications for modelling fuel cell and combustion-based residential cogeneration device within whole-building simulation programs. [Report]

Becerra, Victor M. and Nasuto, Slawomir J. and Anderson, James D. and Ceriotti, M. and Bombardelli, Claudio (2007) Search space pruning and global optimization of multiple gravity assist trajectories with deep space manoeuvers. In: IEEE Congress on Evolutionary Computation (CEC), 2007-09-25 - 2007-09-28.

Bernier, M. and Kummert, M. and Bertagnolio, S. (2007) Development and application of test cases for comparing vertical ground heat exchanger models. In: International Building Performance Simulation Association (IBPSA) Conference 2007, 2007-09-03 - 2007-09-06.

Biggs, James and Holderbaum, William (2007) Integrating Hamiltonian systems defined on the Lie groups SO(4) and SO(1,3). In: The 45th European Control Conference (ECC '07), 2007-07-02 - 2007-07-05.

Badawy, A. and McInnes, C.R. (2007) Robot motion planning using hyperboloid potential functions. In: World Congress on Engineering 2007, 2007-07-02 - 2007-07-04.

Biggs, James and Holderbaum, William and Jurdjevic, Velimir (2007) Singularities of optimal control problems on some six dimensional Lie groups. IEEE Transactions on Automatic Control, 52 (6). pp. 1027-1038. ISSN 0018-9286

Badawy, A. and McInnes, C.R. (2007) Free flyer manoeuvring round a space station. In: 12th International Conference on Aerospace Sciences & Aviation Technology, 2007-05-29 - 2007-05-31.

Baker, P.H. and Bailly, D. and Campbell, M. and Galbraith, G.H. and McLean, R.C. and Poffa, N. and Sanders, C.H. (2007) The application of x-ray absorption to building moisture transport studies. Measurement, 40 (9-10). pp. 951-959. ISSN 0263-2241

Banks, W.M. and Hayward, D. and Pethrick, R.A. (2007) Non destructive examination of composite structures using dielectric examination. In: 16th International Conference on Composite Materials, 2011-07-20.

Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D. and Pham, X.P. (2007) Investigation into wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). pp. 233-242. ISSN 0957-6509

Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D and Pham, X.P. (2006) Wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (4). pp. 195-203. ISSN 1475-0902

Badawy, Ahmed and McInnes, Colin (2006) Autonomous structure assembly using potential field functions. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.

Bezyrtzi, Georgia and Strachan, Paul and Simpson, Ross and Shanks, Robert (2006) Estimation of the carbon footprint of student halls of residence in the University of Strathclyde. WSEAS Transactions on Environment and Development, 2 (9). pp. 1152-1156. ISSN 1790-5079

Badawy, Ahmed and McInnes, Colin (2006) Separation distance for robot motion control using superquadratic obstacle potentials. In: International Control Conference 2006, 2006-08-30 - 2006-09-01.

Bourgeois, D. and Reinhart, C. and Macdonald, I. (2006) Adding advanced behavioural models in whole building energy simulation: A study on the total energy impact of manual and automated lighting control. Energy and Buildings, 38 (7). pp. 814-823. ISSN 0378-7788

Baoyin, Hexi and McInnes, Colin (2006) Solar sail equilibria in the elliptical restricted three-body problem. Journal of Guidance, Control and Dynamics, 29 (3). pp. 538-543. ISSN 1533-3884

Baoyin, Hexi and McInnes, Colin R. (2006) Solar sail halo orbits at the Sun-Earth artificial L1 point. Celestial Mechanics and Dynamical Astronomy, 94 (2). pp. 155-171. ISSN 0923-2958

Baker, P.H. and Galbraith, G.H. and Sanders, C.H. and McLean, R.C. (2006) The development of instrumentation for the measurement of relative humidity within building microenvironments. Measurement, 39 (6). pp. 565-574. ISSN 0263-2241

Baker, P.H. and Galbraith, Graham H. and McLean, R. Craig and Hunter, Colin and Sanders, C.H. (2006) The measurement and prediction of conditions within indoor microenvironments. Indoor and Built Environment, 15 (4). pp. 357-364. ISSN 1420-326X

Baoyin, Hexi and McInnes, Colin (2006) Trajectories to and from the Lagrange points and the primary body surfaces. Journal of Guidance, Control and Dynamics, 29 (4). pp. 998-1003. ISSN 1533-3884

Biggs, J.D. and Holderbaum, William (2006) Integrating control systems defined on the frame bundles of the space forms. In: 45th IEEE Conference on Decision and Control, 2006-12-13 - 2006-12-15.

Biggs, James and Holderbaum, William (2006) The geometry of optimal control problems on some six dimensional lie groups. In: 44th IEEE Conference on Decision and Control/European Control Conference, 2005-12-12.

Bookless, John and McInnes, Colin (2006) Dynamics and control of displaced periodic orbits using solar sail propulsion. Journal of Guidance, Control and Dynamics, 29 (3). pp. 527-537. ISSN 1533-3884

Bradley, G R and MacKenzie, P M (2006) Development of a novel metastable composite material. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). pp. 181-187. ISSN 1464-4207

Bourgeois, D. and Reinhart, C. and Macdonald, I. (2005) Assessing the total energy impact of occupant behavioural response to manual and automated lighting systems. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18.

Bloem, J.J. and Colli, A. and Strachan, P. (2005) Evaluation of PV technology implementation in the building sector. In: International Conference on Passive and Low Energy Cooling for the Built Environment, 2005-05-01.

Blackburn, Steven and Nicol, Alexander and Walker, Colin (2005) Development of a biomechanically validated turf testing rig. In: XXth Congress of the International Society of Biomechanics, 2005-07-31 - 2005-08-05.

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2005) Changes in the dielectric relaxations of water in epoxy resin as a function of the extent of water ingress in carbon fibre composites. Polymer, 46 (7). pp. 2218-2229. ISSN 0032-3861

Bookless, John and McInnes, Colin; (2005) Control of Lagrange point orbits using solar sail propulsion. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484

Banks, W.M. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded CFRP structures subjected to ageing in various solvents. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 273-281. ISSN 1464-4207

Bailey, C.L. and Barber, Robert W. and Emerson, David and Lockerby, Duncan A. and Reese, Jason; (2004) A critical review of the drag force on a sphere in the transition flow regime. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 743-748. ISBN 0-7354-0247-7

Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836

Bourgeois, D. and Hand, Jon and Macdonald, Iain and Reinhart, C. (2004) Adding sub-hourly occupancy prediction, occupancy-sensing control and manual environment control to whole-building energy simulation. In: Proceedings of the Indoor Air Quality, Ventilation and Energy Conservation in Buildings Conference, 2004-06-09 - 2004-06-11.

Bloem, J.J. and Baker, P.H. and Strachan, Paul (2004) Energy performance of buildings and the integration of photovoltaics. In: International Conference on Improving Energy Efficiency in Commercial Buildings (IEECB 04), 2004-04-19 - 2004-04-21.

Bookless, J. and McInnes, C.R.; (2004) Dynamics stability and control of displaced non-Keplerian orbits. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 173.

Born, F. J. and Clarke, J. A. and Johnstone, C. M.; (2004) Development of a simulation-based decision support tool for renewable energy integration and demand-supply matching. In: Proceedings of ESim 04 Conference, Vancouver. IBPSA. ISBN 255117239X

Bradley, David E. and Kummert, Michael and McDowell, Timothy P.; (2004) Converging on a recommended set of interpretations and assumptions in applying standard tests to energy analysis tools. In: Proceedings of SimBuild 2004, IBPSA-USA Conference on Building Sustainability and Performance Through Simulation. IBPSA.

Bradley, David E. and Kummert, Michael and McDowell, Timothy P.; (2004) Experiences with and interpretation of standard test methods of building energy analysis tools. In: Proceedings of the IBPSA-Canada Bi-Annual Conference, eSIM 2004. IBPSA.

Burkholder, F.W. and Kummert, M. (2004) TRNSYS modeling of a hybrid lighting system. In: TRNSYS Users Conference, 2004-03-01.

Bailly, D. and Campbell, M. and Poffa, N. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. and Nielsen, G.G. (2003) Moisture transport studies in building materials. In: Proceedings of the 12th Institute of Physics Conference on Sensors and their Applications, 2003-09-02 - 2003-09-04.

Bolmsjo, G. and Lorentzon, U. and Vatau, M. and Doyle, M.J. and Carus, D. and Topping, M.; Craddock, G.M. and McCormack, L.P. and Reilly, R.B. and Knops, H., eds. (2003) Development and integration of package opening devices with a flexible robot in a smart home environment. In: Proceedings of the 7th European AAATE Conference: Shaping the Future. Assistive Technology Research Series . IOS Press, Amsterdam, Netherlands. ISBN 9781586033736

Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Inertial errors of forceplate analysis of artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.

Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Player/ground interactions on artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.

Brachet, P. and Blackburn, S.J. and Nicol, A.C. and Walker, C.A. (2003) Body and limb accelerations during football activities on artificial turf. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.

Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Mechanical properties of an artificial turf using servo-hydraulic and drop-weight impact testers. In: XIXth Congress of the International Society of Biomechanics, 2003-07-06 - 2003-07-11.

Beausoleil-Morrison, I. and Clarke, J.A. (2003) An adaptive conflation between computational fluid dynamics and thermal simulation for modelling indoor air flow and convective heat transfer at internal building surfaces. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 109 (2). pp. 743-756. ISSN 0001-2505

Brodesser, Monika and Banks, W.M. and Pethrick, R.A. and Casey, N. and Brown, J.; Chung, J.S. and Matsui, T., eds. (2003) The chemical compatibility of thermoplastic hose used in umbilicals. In: Proceedings of the 13th (2003) international offshore and polar engineering conference. International Offshore and Polar Engineering Conference Proceedings . International Society of Offshore & Polar Engineers, USA, pp. 1-7. ISBN 1880653605

Banks, W.M. and Nash, D.H. (2003) Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc.. ISBN 978-1-86058-401-5

Blanco, E. and Fernandez-Vina, F. and Fernandez-Oro, J. and Scanlon, T.J. and Stickland, M.T. (2002) Analisis numerico de una bomba semiaxial. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, part III: investigation of mechanical strength. Journal of Adhesion, 78 (12). pp. 1027-1038. ISSN 0021-8464

Bartak, M. and Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Melikov, A. and Popiolek, Z. and Stankov, P. (2002) Integrating CFD and building simulation. Building and Environment, 37 (8-9). pp. 865-871. ISSN 0360-1323

Banks, W.M. (2002) How much resource should be invested in training less qualified school leavers and less experienced engineers? In: Sharing Best Practice on Overcoming the Engineering Skills Shortage (The Engineer Conferences), 2002-07-01.

Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L.; (2002) Assessment of water ingress in adhesively bonded composite structures using dielectric spectroscopy. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2002) Experience with classroom feedback systems to enable Socratic dialogue in large engineering classes. In: 2nd Annual Symposium on Engineering Education, 2002-01-01.

Banks, W.M. (2002) Profession misrepresented. Professional Engineering, 15 (6). p. 19. ISSN 0953-6639

Banks, W.M. and Hayward, D. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L.; (2002) Developments in dielectric techniques for non-destructive examination. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506

Blanco, E. and Fernandez, J. and Scanlon, T.J. and Stickland, M.T.; (2002) A numerical analysis of a mixed flow pump. In: Proceedings of the ASME Joint US-European Fluids Engineering. ASME, pp. 791-798. ISBN 0791836150

Boinard, P. and Banks, W.M. and Pethrick, R.A.; Miyano, Yasushi and Cardon, Albert H. and Reifsnicker, Ken L. and Fukada, Hiroshi and Ogihara, Shinji, eds. (2002) Dielectric spectroscopy technique to assess the durability of adhesively bonded composite joint structures. In: Durability analysis of composite systems 2001: proceedings of the Fifth International Conference on Durability Analysis of Composite Systems. Taylor & Francis, London, UK, pp. 101-108. ISBN 9058093824

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part I: Water permeation in epoxy adhesive. Journal of Adhesion, 78 (12). pp. 1001-1014. ISSN 0021-8464

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part II: Dielectric study. Journal of Adhesion, 78 (12). pp. 1015-1026. ISSN 0021-8464

Boyle, J.T. (2001) The design by analysis manual, European Commission, EUR-19030EN. Guide or manual. European Commission, Glasgow, UK.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. (2001) Approaches to teaching and learning in engineering education (NATALIE) project. In: International Colloquium: Global Changes in Engineering Education, Proceedings of Ed-Media 2001 World Conference on Education Multi Media, 2001-10-01.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2001) The use of classroom feedback systems to enable active learning in large engineering mechanics classes. In: International Conference on Engineering Education 2001, 2001-08-06 - 2001-08-10.

Born, F. J. and Clarke, J. A. and Johnstone, C. M.; (2001) Development and demonstration of a renewable energy based demand/supply decision support tool for the building design profession. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA, pp. 245-250. ISBN 8590193934

Born, F. J. and Clarke, J. A. and Johnstone, C. M. and Smith, N. A. V. (2001) Merit - An evaluation tool for 100% renewable energy provision. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16.

Boyle, J.T. (2001) Accurate approximate estimates of limit and shakedown loads using elastic finite element analysis. In: 18th Canadian Congress of Applied Mechanics (CANCAM 2001, 2001-06-03 - 2001-06-07.

Banks, W.M. and Nash, D.H. and Tooth, A.S. and Flaherty, A.E. (2001) Design optimisation studies on composite pressure vessels and piping to ensure long term structural integrity. In: Structural Integrity of Composite Materials and Structures: Optimisation of Micro-structural Design, 2001-05-20 - 2001-05-25.

Boinard, P. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2001) Novel non-destructive technique to assess the degradation of adhesively bonded composite structures. Insight: The Journal of the British Institute of Non-Destructive Testing, 43 (3). pp. 159-162. ISSN 1354-2575

Baker, T.N.; (2001) Quantitative metallography using transmission electron microscopy. In: 5th International Conference on Quantitive Microscopy of High Temperature Materials 2001. Maney Publishing, pp. 161-189. ISBN 1861251092

Bartak, M. and Cermak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. A. and Majer, M. and Stankov, P.; (2001) Experimental and numerical study of local mean age of air. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 8590193934

Bartak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Stankov, P. (2001) Experimental and numerical investigation of thermal comfort in room with displacement ventilation. In: CLIMA '01 Conference, 2001-12-01.

Bates, J.R. and Blieske, U. and Bloem, J.J. and Campbell, J. and Ferrazza, F. and Hacker, R.J. and Strachan, Paul and Tripanagnostopoulos, Y.; (2001) Building implementation of photovoltaics with active control of temperature. In: Building IMPACT - final result, Proceedings of the 17th Photovoltaic Solar Energy Conference and Exhibition, Munich, October 2001. WIP. ISBN 3-936388-19-1

Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Macdonald, I. A. and Melikov, A. and Stankov, P.; (2001) Further developments in the conflation of CFD and building simulation. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 8590193934

Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. (2001) Assessment of water permeation in adhesively bonded composite structures by dielectric spectroscopy. In: International Conference on Materials Science and Engineering, 2001-04-01.

Born, Francesca J. and Clarke, Joseph and Johnstone, Cameron and Kelly, Nicolas and Burt, Graeme and Dysko, Adam and Macdonald, Iain and Hunter, I.B.B. (2001) On the integration of renewable energy systems within the built environment. Building Services Engineering Research and Technology, 22 (1). pp. 3-13.

Banks, W.M. and Nash, D.H. and Flaherty, A.E. and Fok, W.C. and Tooth, A.S. (2000) A simplified design approach to determine the maximum strains in a grp vessel supported on twin saddles. International Journal of Pressure Vessels and Piping, 77 (13). pp. 837-842. ISSN 0308-0161

C

Cartmell, Matthew P. and Faller, James E. and Lockerbie, Nicholas A. and Handous, Eva (2020) On the modelling and testing of a laboratory scale Foucault pendulum as a precursor for the design of a high performance measurement instrument. Proceedings of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences, 476 (2238). 20190680.

Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben (2020) Spatial estimation of outdoor NO2 levels in Central London using deep neural networks and a wavelet decomposition technique. Ecological Modelling, 424. 109017. ISSN 0304-3800

Campobasso, Michele Sergio and Cavazzini, Anna and Minisci, Edmondo (2020) Rapid estimate of wind turbine energy loss due to blade leading edge delamination using artificial neural networks. Journal of Turbomachinery. ISSN 1528-8900

Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben (2020) Short- and long-term forecasting of ambient air pollution levels using wavelet-based non-linear autoregressive artificial neural networks with exogenous inputs. International Journal of Environmental Impacts, 3 (2). pp. 143-154. ISSN 2398-2640

Cartmell, Matthew P. (2020) Lense-Thirring Precession - Theoretical Narrative. [Report]

Cao, J. and Clemente, C. and McInnes, C. R. and Soraghan, J. J. (2020) Solar radiation pressure enabled femtosatellite based Earth remote sensing. IEEE Transactions on Aerospace and Electronic Systems. ISSN 0018-9251

Clarke, Joseph Andrew (2020) Why tools for buildings and cities performance simulation need to evolve. Buildings & Cities.

Cavazzini, Anna and Minisci, Edmondo and Campobasso, M. Sergio; (2019) Machine learning-aided assessment of wind turbine energy losses due to blade leading edge damage. In: ASME 2019 2nd International Offshore Wind Technical Conference. American Society of Mechanical Engineers (ASME), MLT. ISBN 978-0-7918-5935-3

Clark, Ruaridh and Nikolova, Niia and Macdonald, Malcolm and McGeown, William J. (2019) Network influence based classification and comparison of neurological conditions. In: Complex Networks 2019, 2019-12-10 - 2019-12-12.

Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Higher-order and higher floating-point precision numerical approximations of finite strain elasticity moduli. International Journal for Numerical Methods in Engineering, 120 (10). pp. 1184-1201. ISSN 0029-5981

Chen, Boshan and Roy, Krishanu and Uzzaman, Asraf and Raftery, Gary M. and Nash, David and Clifton, G. Charles and Pouladi, P. and Lim, James B.P. (2019) Effects of edge-stiffened web openings on the behaviour of cold-formed steel channel sections under compression. Thin-Walled Structures, 144. 106307. ISSN 0263-8231

Chen, Xiaohui and Fang, Shuang and Chen, Haofeng (2019) Stress concentration factor and fatigue analysis of a lateral nozzle with local wall thinning. Engineering Failure Analysis, 105. pp. 289-304. ISSN 1350-6307

Connolly, Stephen John and MacKenzie, Donald and Gorash, Yevgen (2019) Isotropic hyperelasticity in principal stretches : explicit elasticity tensors and numerical implementation. Computational Mechanics, 64 (5). pp. 1273-1288. ISSN 0178-7675

Clark, Ruaridh and Punzo, Giuliano and Macdonald, Malcolm (2019) Network communities of dynamical influence. Scientific Reports, 9. 17590. ISSN 2045-2322

Cho, Nak-Kyun and Wang, Run-Zi and Ma, Zhiyuan and Chen, Haofeng and Xuan, Fu-Zhen (2019) Creep-fatigue endurance of a superheater tube plate under non-isothermal loading and multi-dwell condition. International Journal of Mechanical Science, 161-162. 105048. ISSN 0020-7403

Chen, Xiaohui and Chen, Haofeng and Chen, Xu (2019) 基于线性匹配方法的核电站弯管在循环载荷下的安定性分析. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 30 (19). pp. 2269-2275. ISSN 1004-132X

Chen, Xiaohui and Chen, Haofeng and Zhao, Li (2019) Ratcheting behavior of pressurized corroded straight pipe subjected to cyclic bending. Thin-Walled Structures. ISSN 0263-8231 (In Press)

Cabaneros, Sheen Mclean and Calautit, John Kaiser and Hughes, Ben Richard (2019) A review of artificial neural network models for ambient air pollution prediction. Environmental Modelling and Software, 119. pp. 285-304. ISSN 1364-8152

Capobianchi, Paolo and T. Pinho, Fernando and Lappa, Marcello and Oliveira, Mónica S. N. (2019) Thermocapillary motion of a Newtonian drop in a dilute viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 270. pp. 8-22. ISSN 0377-0257

Connolly, S. and MacKenzie, D. and Gorash, Y.; Huneau, Bertrand and Le Cam, Jean-Benoît and Marco, Yann and Verron, Erwan, eds. (2019) The implications of constitutive model selection in hyperelastic parameter identification. In: Constitutive Models for Rubber XI. CRC Press, FRA. ISBN 9780429324710

CHO, Nak-Kyun and Chen, Haofeng and MacKenzie, Donald and Giugliano, Dario (2019) Investigating the effects of cyclic thermo-mechanical loading on cyclic plastic behaviour of a ninety-degree back-to-back pipe bend system. Journal of Pressure Vessel Technology. ISSN 0094-9930

Cóstola, D. and Carreira, G. and Labaki, L.O. and Fernandes, L. (2019) Seasonal Thermal Sensation Vote - An indicator for long-term energy performance of dwellings with no HVAC systems. Energy and Buildings, 187. pp. 64-76. ISSN 0378-7788

Calautit, John and O'Connor, Dominic and Shahzad, Sally and Calautit, Katrina and Hughes, Ben (2019) Numerical and experimental analysis of a natural ventilation windcatcher with passive heat recovery for mild-cold climates. Energy Procedia, 158. pp. 3125-3130. ISSN 1876-6102

Clark, Ruaridh and Macdonald, Malcolm (2018) Eigenvector-based community detection for identifying information hubs in neuronal networks. Working paper. bioRxiv, New York.

Cho, Nak-Kyun and Chen, Haofeng; (2018) Cyclic plasticity behavior of 90° back-to-back pipe bends under cyclic bending and steady pressure. In: 2018 26th International Conference on Nuclear Engineering. ASME, GBR. ISBN 978-0-7918-5153-1

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N. (2018) Deformation of a ferrofluid droplet in a simple shear flow under the effect of a constant magnetic field. Computers and Fluids, 173. pp. 313-323. ISSN 0045-7930

Clarke, Joe (2018) The role of building operational emulation in realizing a resilient built environment. Architectural Science Review, 61 (5). pp. 358-361. ISSN 0003-8628

Caboni, M. and Minisci, E. and Riccardi, A. (2018) Aerodynamic design optimization of wind turbine airfoils under aleatory and epistemic uncertainty. Journal of Physics: Conference Series, 1037 (4). 042011. ISSN 1742-6588

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N.; Nóbrega, João and Jasak, Hrvoje, eds. (2018) Implementation of a flexible and modular multiphase framework for the analysis of surface-tension-driven flows based on a LS-VOF approach. In: OpenFOAM®. Springer, PRT, pp. 1-14. ISBN 9783319608457

CHO, Nak-Kyun and Chen, Haofeng and Boyle, James and Xuan, Fu-Zhen (2018) Enhanced fatigue damage under cyclic thermo-mechanical loading at high temperature by structural creep recovery mechanism. International Journal of Fatigue. ISSN 0142-1123

Calautit, Katrina and Aquino, Angelo and Calautit, John Kaiser and Nejat, Payam and Jomehzadeh, Fatemeh and Hughes, Ben Richard (2018) A review of numerical modelling of multi-scale wind turbines and their environment. Computation, 6 (1). 24. ISSN 1866-9964

Cartmell, Matthew and Ganilova, Olga and Lennon, Eoin and Shuttleworth, Gavin (2018) Motorised momentum exchange space tethers : the dynamics of asymmetrical tethers and some recent new applications. MATEC Web of Conferences, 148. 01001. ISSN 2261-236X

Conte, Davide and Di Carlo, Marilena and Ho, Koki and Spencer, David B. and Vasile, Massimiliano (2018) Earth-Mars transfers through Moon distant retrograde orbits. Acta Astronautica, 143. pp. 372-379. ISSN 0094-5765

Czél, Gergely and Rev, Tamas and Jalalvand, Meisam and Fotouhi, Mohamad and Longana, Marco L. and Nixon-Pearson, Oliver J. and Wisnom, Michael R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104. pp. 151-164. ISSN 1359-835X

Chen, Xiaohui and Chen, Xu and Chen, Haofeng (2018) Influence of stress level on uniaxial ratcheting effect and ratcheting strain rate in austenitic stainless steel Z2CND18.12N. Steel and Composite Structures, 27 (1). pp. 89-94. ISSN 1229-9367

Cabaneros, Sheen Mclean S. and Calautit, John Kaiser S. and Hughes, Ben Richard (2017) Hybrid artificial neural network models for effective prediction and mitigation of urban roadside NO2 pollution. Energy Procedia, 142. pp. 3524-3530. ISSN 1876-6102

Calautit, John and Aquino, Angelo and O'Connor, Dominic and Cabaneros, Sheen and Shahzad, Sally and Wazed, Saeed and Garwood, Tom and Calautit, Katrina and Hughes, Ben (2017) Indoor environmental quality (IEQ) analysis of a low energy wind catcher with horizontally-arranged heat transfer devices. Energy Procedia, 142. pp. 2095-2101. ISSN 1876-6102

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica (2017) Walls and domain shape effects on the thermal marangoni migration of three-dimensional droplets. Physics of Fluids, 29 (11). 112102. ISSN 1070-6631

Conte, Davide and Di Carlo, Marilena and Budzyn, Dorota and Burgoyne, Hayden and Fries, Dan and Grulich, Maria and Heizmann, Sören and Jethani, Henna and Lapôtre, Mathieu and Roos, Tobias and Serrano Castillo, Encarnación and Schermann, Marcel and Vieceli, Rhiannon and Wilson, Lee and Wynard, Christofer (2017) Advanced concept for a crewed mission to the Martian moons. Acta Astronautica, 139. pp. 545-563. ISSN 0094-5765

Cho, Nak-Kyun and Chen, Haofeng (2017) Shakedown, ratchet, and limit analyses of 90° back-to-back pipe bends under cyclic in-plane opening bending and steady internal pressure. European Journal of Mechanics - A/Solids. ISSN 0997-7538 (In Press)

Connolly, S. and MacKenzie, D. (2017) Hyperelastic material characterisation of rubber by means of novel experimentation and reverse engineering. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Connolly, Stephen John and MacKenzie, Donald and Comlekci, Tugrul (2017) Multi-objective optimization of hyperelastic material constants : a feasibility study. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Czél, Gergely and Suwarta, Putu and Jalalvand, Meisam and Wisnom, Michael R. (2017) Investigation of the compression performance and failure mechanism of pseudo-ductile thin-ply hybrid composites. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.

Cho, Nak-Kyun and Chen, Haofeng (2017) Investigation of structural creep strain recovery and its impact on structural integrity. In: 24th International Conference on Structural Mechanics in Reactor Technology, 2017-08-20 - 2017-08-25, BEXCO/Centum Hotel.

Clarke, Joseph and Costola, Daniel and Kelly, Nicolas and Monari, Filippo; (2017) A 'big data' approach to the application of building performance simulation to improve the operational performance of large estates. In: Building Simulation 2017. International Building Performance Simulation Association, USA.

Capon, C.J. and Brown, M. and White, C. and Scanlon, T. and Boyce, R.R. (2017) pdFOAM : a PIC-DSMC code for near-Earth plasma-body interactions. Computers and Fluids, 149. pp. 160-171. ISSN 0045-7930

Calautit, John Kaiser and Aquino, Angelo I. and Shahzad, Sally and Nasir, Diana S.N.M. and Hughes, Ben Richard (2017) Thermal comfort and indoor air quality analysis of a low-energy cooling windcatcher. Energy Procedia, 105. pp. 2865-2870. ISSN 1876-6102

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Mónica S. N.; (2017) Numerical simulations of the thermocapillary migration of a deformable Newtonian droplet in an Oldroyd-B matrix fluid in stokes flow conditions. In: 30th Scottish Fluid Mechanics Meeting. University of Strathclyde, Glasgow, UK. ISBN 9781527209725

Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard (2017) Optimisation and analysis of a heat pipe assisted low-energy passive cooling system. Energy and Buildings, 143. pp. 220-233. ISSN 0378-7788

Cowie, Andrew and Kelly, Nick and McGhee, Raheal and Samuel, Aizaz and Higgins, Ciaran Andrew and Peat, Watson; (2017) Predicting the effect of changes to the urban environment on future electrical demand using building simulation and archetype models. In: Building Simulation 2017. International Building Performance Simulation Association, USA. (In Press)

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. and Czigány, Tibor (2017) Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites. Composites Part B: Engineering, 111. pp. 348-356. ISSN 1359-8368

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica; Co, Albert, ed. (2017) Thermal Marangoni migration of droplets in an Oldroyd-B fluid under creeping flow conditions. In: The Society of Rheology. University of Maine, Orono, ME..

Calautit, John Kaiser and Hughes, Ben Richard and Nasir, Diana SNM (2017) Climatic analysis of a passive cooling technology for the built environment in hot countries. Applied Energy, 186 (Part 3). pp. 321-335. ISSN 0306-2619

Clark, Ruaridh and Punzo, Giuliano and Macdonald, Malcolm; (2016) Consensus speed optimisation with finite leadership perturbation in k-nearest neighbour networks. In: 2016 IEEE 55th Conference on Decision and Control (CDC). IEEE, USA. ISBN 978-1-5090-1837-6

Casseau, Vincent and Espinoza, Daniel E. R. and Scanlon, Thomas J. and Brown, Richard E. (2016) A two-temperature open-source CFD model for hypersonic reacting flows, part two : multi-dimensional analysis. Aerospace, 3 (4). ISSN 2052-451X

Cockroft, J. and Cowie, A. and Samuel, A. and Strachan, P. (2016) Potential energy savings achievable by zoned control of individual rooms in UK housing compared to standard central heating controls. Energy and Buildings. ISSN 0378-7788

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites. Composites Part A: Applied Science and Manufacturing, 91. pp. 436-447. ISSN 1359-835X

Clark, Ruaridh A. and Punzo, Giuliano and MacLeod, Charles N. and Dobie, Gordon and Summan, Rahul and Bolton, Gary and Pierce, Stephen G. and Macdonald, Malcolm (2016) Autonomous and scalable control for remote inspection with multiple aerial vehicles. Robotics and Autonomous Systems, 87. pp. 258-268. ISSN 0921-8890

Casseau, V. and Scanlon, T. J. and John, B. and Emerson, D. R. and Brown, R. E.; Struchtrup, Henning and Ketsdever, Andrew, eds. (2016) Hypersonic simulations using open-source CFD and DSMC solvers. In: Proceedings of the 30th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings, 1786 . American Institute of Physics, CAN. ISBN 9780735414488

Casseau, Vincent and Palharini, Rodrigo . and Scanlon, Thomas J. and Brown, Richard E. (2016) A two-temperature open-source CFD model for hypersonic reacting flows, part one : zero-dimensional analysis. Aerospace, 3 (4). ISSN 2052-451X

Carlo, Marilena Di and Ricciardi, Lorenzo and Vasile, Massimiliano; (2016) Multi-objective optimisation of constellation deployment using low-thrust propulsion. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459

Conte, Davide and Budzyń, Dorota and Burgoyne, Hayden and Di Carlo, Marilena and Fries, Dan and Grulich, Maria and Heizmann, Sören and Jethani, Henna and Lapôtre, Mathieu and Roos, Tobias and Serrano Castillo, Encarnación and Scherrmann, Marcel and Vieceli, Rhiannon and Wilson, Lee and Wynard, Christopher; (2016) Innovative Mars Global International Exploration (IMaGInE) mission. In: AIAA Space 2016. AIAA Space Forum, 2 . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781510831957

Castaño, Adiel and Fernández-Navarro, Francisco and Riccardi, Annalisa and Hervás-Martínez, Cesar (2016) Enforcement of the principal component analysis - extreme learning machine algorithm by linear discriminant analysis. Neural Computing and Applications, 27 (6). pp. 1749-1760. ISSN 0941-0643

Caboni, Marco and Campobasso, M. Sergio and Minisci, Edmondo (2016) Wind turbine design optimization under environmental uncertainty. Journal of Engineering for Gas Turbines and Power, 138 (8). 082601. ISSN 0742-4795

Cartmell, Matthew P. (2016) Editor's note. Journal of Sound and Vibration, 371. p. 1. ISSN 0022-460X

Capobianchi, Paolo and Lappa, Marcello and Oliveira, Monica; (2016) Development of a multiphase solver for numerical simulations of thermally driven marangoni flows. In: The 29th Scottish Fluid Mechanics Meeting, Book of Abstracts. University of Edinburgh, Edinburgh, UK, p. 15.

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 143. pp. 362-370. ISSN 0263-8223

Connolly, Stephen and Gorash, Yevgen and Bickley, Alan; Bickley, Alan, ed. (2016) A comparative study of simulated and experimental results for an extruding elastomeric component. In: 23rd International Conference on Fluid Sealing 2016. BHR Group Limited, GBR, pp. 31-41. ISBN 9781510821774

Campobasso, M. Sergio and Minisci, Edmondo and Caboni, Marco (2016) Aerodynamic design optimization of wind turbine rotors under geometric uncertainty. Wind Energy, 19 (1). pp. 51-65. ISSN 1095-4244

Cartmell, M.P. (2016) Editor's Note : Erratum: Structural damage detection based on the reconstructed phase space for reinforced concrete slab by Zhenhua Nie, Hong Hao, Hongwei Ma (Journal of Sound and Vibration (2013) 332 (1061-1078)). Journal of Sound and Vibration, 361. p. 1. ISSN 0022-460X

Calautit, John Kaiser and Hughes, Ben Richard (2016) A passive cooling wind catcher with heat pipe technology : CFD, wind tunnel and field-test analysis. Applied Energy, 162. pp. 460-471. ISSN 0306-2619

Cairns, J.W.P. and McPherson, N.A. and Galloway, A.M. (2015) Identification of key GMAW fillet weld parameters and interactions using artificial neural networks. Welding and Cutting, 15 (1). pp. 51-57. ISSN 1612-3433 (In Press)

Clarke, Joe and Cockroft, Jeremy and Cowie, Andrew and Hand, Jon and Kelly, Nick and Samuel, Aizaz and Tang, Dechao; (2015) On the high resolution simulation of building/plant systems. In: 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings. International Building Performance Simulation Association, IND, pp. 90-97.

Calautit, John Kaiser and Chaudhry, Hassam Nasarullah and Hughes, Ben Richard (2015) Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment. Data in Brief, 5. pp. 424-428. ISSN 2352-3409

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. and Canal, Luis P. and González, Carlos D. and LLorca, Javier (2015) Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law. Engineering Fracture Mechanics, 149. pp. 326-337. ISSN 0013-7944

Cross, Daniel and Hughes, Ben and Ingham, Derek and Ma, Lin (2015) A validated numerical investigation of the effects of high blockage ratio and train and tunnel length upon underground railway aerodynamics. Journal of Wind Engineering and Industrial Aerodynamics, 146. pp. 195-206. ISSN 0167-6105

Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard and Sim, Lik Fang (2015) CFD and experimental study on the effect of progressive heating on fluid flow inside a thermal wind tunnel. Computation, 3 (4). pp. 509-527. ISSN 1866-9964

Cassineli Palharini, Rodrigo and White, Craig and Scanlon, Thomas J. and Brown, Richard E. and Borg, Matthew K. and Reese, Jason M. (2015) Benchmark numerical simulations of rarefied non-reacting gas flows using an open-source DSMC code. Computers and Fluids, 120. pp. 140-157. ISSN 0045-7930

Camilleri, Duncan and Micallef, Daniel and Arbaoui, Larbi and Toumpis, Athanasios and Galloway, Alexander (2015) Numerical modelling techniques applicable for the prediction of residual stresses and distortion due to mild steel DH36 frictions stir welding. In: 4th International Conference on Friction Stir Welding, FSWP2015, 2015-10-01 - 2015-10-02.

Clarke, Joseph Andrew and Hensen, Jan (2015) Integrated building performance simulation : progress, prospects and requirements. Building and Environment, 91. pp. 294-306. ISSN 0360-1323

Conte, Davide and Di Carlo, Marilena and Ho, Koki and Spencer, David B. and Vasile, Massimiliano (2015) Earth-Mars transfers through Moon distant retrograde orbits. In: AAS/AIAA Astrodynamics Specialist Conference 2015, 2015-08-09 - 2015-08-13, Colorado.

Casseau, Vincent and Scanlon, Thomas J. and Brown, Richard E. (2015) Development of a two-temperature open source CFD model for hypersonic reacting flows. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.

Caboni, Marco and Campobasso, M. Sergio and Minisci, Edmondo; (2015) Wind turbine design optimization under environmental uncertainty. In: Proceedings of the ASME Turbo Expo 2015. American Society of Mechanical Engineers (ASME), CAN. ISBN 9780791856802

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2015) Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies. Composites Part A: Applied Science and Manufacturing, 72. pp. 75-84. ISSN 1359-835X

Campo-Deaño, Laura and Oliveira, Monica and Pinho, F.T. (2015) A review of computational hemodynamics in middle cerebral aneurysms and rheological models for blood flow. Applied Mechanics Reviews, 67 (3). 030801. ISSN 2379-0407

Colombo, Camilla and Alessi, Elisa Maria and van der Weg, Willem Johan and Soldini, Stefania and Letizia, Francesca and Vetrisano, Massimo and Vasile, Massimiliano and Rossi, Alessandro and Landgraf, Markus (2015) End-of-life disposal concepts for libration point orbit and highly elliptical orbit missions. Acta Astronautica, 110. pp. 298-312. ISSN 0094-5765

Cairns, Jonathan and McPherson, Norman and Galloway, Alexander (2015) Using artificial neural networks to identify and optimise the key parameters affecting geometry of a GMAW fillet weld. In: 18th International Conference on Joining Materials, JOM-18, 2015-04-26 - 2015-04-29, Konventum LO-Skolen.

Chaudhry, Hassam Nasarullah and Calautit, John Kaiser and Hughes, Ben Richard (2015) Computational analysis to factor wind into the design of an architectural environment. Modelling and Simulation in Engineering, 2015. pp. 1-10. 234601. ISSN 1687-5605

Calautit, John Kaiser and O'Connor, Dominic and Sofotasiou, Polytimi and Hughes, Ben Richard (2015) CFD simulation and optimisation of a low energy ventilation and cooling system. Computation, 3 (2). pp. 128-149. ISSN 1866-9964

Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew (2015) Two-beam lidar measurements in a non-homogeneous wind field. In: EWEA Offshore 2015, 2015-03-10 - 2015-03-12.

Clarke, Joseph Andrew (2015) A vision for building performance simulation : a position paper prepared on behalf of the IBPSA Board. Journal of Building Performance Simulation, 8 (2). pp. 39-43. ISSN 1940-1493

Clarke, Joseph Andrew and Hand, Jon and Kim, Jae-min and Samuel, Aizaz and Svehla, Katalin (2015) Performance of actively controlled domestic heat storage devices in a smart grid. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (1). pp. 99-110. ISSN 0957-6509

Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M.; (2015) Buckling analysis and optimization of blade stiffened variable stiffness panels. In: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc., USA. ISBN 9781624103421

Calautit, John Kaiser and Hughes, Ben Richard and O'Connor, Dominic and Shahzad, Sally Salome (2015) CFD and wind tunnel study of the performance of a multi-directional wind tower with heat transfer devices. Energy Procedia, 75. pp. 1692-1697. ISSN 1876-6102

Campbell, Stuart and Ley, F.H. and Galloway, Alexander and McPherson, Norman (2015) Artificial neural network optimisation of shielding gas flow rate in gas metal arc welding subjected to cross drafts when using alternating shielding gases. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (1). pp. 122-129. ISSN 2041-2975

Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio; Greiner, D. and Galván, B. and Periaux, J. and Gauger, N. and Giannakoglou, K.C. and Winter, G., eds. (2014) Robust aerodynamic design optimization of horizontal axis wind turbine rotors. In: Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences. Computational Methods in Applied Sciences . Springer Netherland, ESP, pp. 225-240. ISBN 9783319115405

Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew (2014) Variations in offshore wind turbine wake profiles with different inflow conditions of non-wake-affected upstream wind. In: 14th EMS Annual Meeting & 10th European Conference on Applied Climatology, ECAC, 2014-10-06 - 2014-10-10.

Clark, Ruaridh and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and Pierce, Stephen and Macdonald, Malcolm and Bolton, Gregour; (2014) 3D model generation using an airborne swarm. In: E-Book of Abstracts 41st Annual Review of Progress in Quantitative Nondestructive Evaluation Conference. Iowa State University, USA.

Colombo, Camilla and Mingotti, Giorgio and Bernelli-Zazzara, Franco and McInnes, Colin (2014) Multiple-spacecraft transfers to Sun-Earth distant retrograde orbits for asteroid detection missions. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Chen, Haofeng and Chen, Weihang and Ure, James (2014) A direct method on the evaluation of cyclic steady state of structures with creep effect. Journal of Pressure Vessel Technology, 136 (6). 161404. ISSN 0094-9930

Cassineli Palharini, Rodrigo and Scanlon, Thomas (2014) Atmospheric reentry modelling using an open source DSMC code. PhD thesis, University Of Strathclyde.

Cassineli Palharini, Rodrigo and Scanlon, Thomas and Reese, Jason (2014) Aerothermodynamic comparison of two- and three-dimensional rarefied hypersonic cavity flows. Journal of Spacecraft and Rockets, 51 (5). pp. 1619-1630. ISSN 0022-4650

Ceriotti, Matteo and McInnes, Colin (2014) Design of ballistic three-body trajectories for continuous polar Earth observation in the Earth-Moon system. Acta Astronautica, 102. pp. 178-189. ISSN 0094-5765

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Camilleri, Duncan and Micallef, Daniel (2014) Modelling magnetohydrodynamics to investigate variation of shielding gases on arc characteristics in the GTAW process. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.

Chen, Haofeng and Ure, James and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 2 : Application and verification. International Journal of Pressure Vessels and Piping, 120-121. pp. 152-161. ISSN 0308-0161

Clark, Ruaridh and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and Pierce, Gareth and Macdonald, Malcolm (2014) Autonomous swarm testbed with multiple quadcopters. In: 1st World Congress on Unmanned Systems Enginenering, 2014-WCUSEng, 2014-07-30 - 2014-08-01.

Clarke, Joseph and Hand, Jon and Kim, Jae Min and Ladha, Cassim and Olivier, Patrick and Roskilly, Tony and Royapoor, Mohammad and Samuel, Aizaz and Wu, Dawei (2014) Pervasive sensing as a mechanicsm for the effective control of CHP plant in commerical buildings. In: Building Simulation and Optimisation (BSO14), 2014-06-23 - 2014-06-24, University College London.

Clarke, Joseph Andrew and Hand, Jon and Kim, Jae Min and Ladha, Cassim and Ladha, Karim and Olivier, Patrick and Roskilly, Tony and Royapoor, Mohammad and Samuel, Aizaz and Wu, Dawei (2014) Pervasive sensing as a mechanism for the effective control of CHP plant in commercial buildings. In: Building Simulation and Optimisation (BSO14), 2014-06-23 - 2014-06-24, University College London.

Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M. (2014) Buckling analysis of stiffened variable angle tow panels. Composite Structures, 111. ISSN 0263-8223

Campo-Deaño, Laura and Carneiro, J. and Oliveira, Monica and Pinho, F.T. (2014) Numerical and experimental in-vitro analysis of blood flow through middle cerebral aneurysms. In: 9th Annual European Rheology Conference, AERC 2014, 2014-04-08 - 2014-04-11.

Campo-Deaño, Laura and Carneiro, J. and Oliveira, Monica and Pinho, F.T. (2014) Influence of the non-linear rheological properties of blood in middle cerebral aneurysms : Numerical and experimental in vitro analysis. In: XIX Congreso de Física Estadística, FisEs'14, 2014-04-02 - 2014-04-04.

Colombo, Camilla and Letizia, Francesca and Soldini, Stefania and Lewis, Hugh and Alessi, Elisa Maria and Rossi, Alessandro and Vasile, Massimiliano and Vetrisano, Massimo and Van Der Weg, Willem Johan and Landgraf, Markus (2014) End-of-life disposal concepts for libration point and highly elliptical orbit missions. In: 2nd Conference on Dynamics and Control of Space Systems, DyCoSS2, 2014-03-24 - 2014-03-26.

Cassola, Alexander and Stickland, Matthew and Oldroyd, Andrew and Gribben, Brian and Adams, Neil and Gellatly, Breanne (2014) Sensitivity of space and time on scanning LiDAR data correlation and the implications on synchronisation of bi-static systems. In: EWEA 2014 Annual Wind Energy Event, 2014-03-10 - 2014-03-13.

Caubet, Albert and Biggs, James D.; (2014) Design of an attitude stabilization electromagnetic module for detumbling uncooperative targets. In: 2014 IEEE Aerospace Conference. IEEE Computer Society Press, GBR. ISBN 9781479916221

Calautit, John Kaiser and Chaudhry, Hassam Nasarullah and Hughes, Ben Richard and Sim, Lik Fang (2014) A validated design methodology for a closed-loop subsonic wind tunnel. Journal of Wind Engineering and Industrial Aerodynamics, 125. pp. 180-194. ISSN 0167-6105

Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2014) Analytical method for perturbed frozen orbit around an Asteroid in highly inhomogeneous gravitational fields : A first approach. Astronomicheskii Vestnik / Solar System Research, 48 (1). pp. 33-47. ISSN 0038-0946

Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2014) Trajectory and spacecraft design for a pole-sitter mission. Journal of Spacecraft and Rockets, 51 (1). pp. 311-326. ISSN 0022-4650

Casanova, D. and Tardioli, C. and Lemaître, A. (2014) Space debris collision avoidance using a three-filter sequence. Monthly Notices of the Royal Astronomical Society, 442 (4). pp. 3235-3242. stu1065. ISSN 0035-8711

Calautit, John Kaiser and Hughes, Ben Richard and Chaudhry, Hassam Nasarullah and Ghani, Saud Abdul (2013) CFD analysis of a heat transfer device integrated wind tower system for hot and dry climate. Applied Energy, 112. pp. 576-591. ISSN 0306-2619

Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio (2013) Robust aerodynamic design optimisation of horizontal axis wind turbine rotors. In: EUROGEN 2013 - Evolutionary and deterministic methods for design, optimization and Control with applications to Industrial and Societal Problems, 2013-10-07 - 2013-10-09, Gran Canaria.

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 1 : arc pressure measurement. Science and Technology of Welding and Joining, 18 (7). pp. 591-596. ISSN 1362-1718

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 2 : arc force determination. Science and Technology of Welding and Joining, 18 (7). pp. 597-602. ISSN 1362-1718

Clark, Ruaridh and Macdonald, Malcolm (2013) Residual air inflated systems for CubeSats. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Colombo, Camilla and Lewis, Hugh and Letizia, Francesca and Vasile, Massimiliano and Vetrisano, Massimo and Van Der Weg, Willem Johan and McInnes, Colin and Macdonald, Malcolm and Alessi, Elisa Maria and Rossi, Alessandro and Dimare, Linda and Landgraf, Markus (2013) End-of-life disposal trajectories for libration point and highly elliptical orbit missions. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2013) A computational fluid dynamic analysis of the effect of weld nozzle geometry changes on shielding gas coverage during gas metal arc welding. Journal of Manufacturing Science and Engineering, 135 (5). 051016. ISSN 1528-8935

Clarke, Joseph Andrew and Hand, Jon and Hong, Jun and Kelly, Nicolas and Picco, Marco and Samuel, Aizaz and Svehla, Katalin (2013) Low energy communities : The automatic sizing of hybrid renewable energy schemes and the generation of a simulation input model for performance appraisal. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.

Clarke, Joseph Andrew and Hand, Jon and Kim, Jae Min and Samuel, Aizaz and Svehla, Katalin (2013) Electricity storage within the domestic sector as a means to enable renewable energy integration within exisiting electricity networks. In: 13th Building Simulation Conference, BS2013, 2013-08-25 - 2013-08-28.

Caubet, Albert and Biggs, James (2013) Optimal attitude motion planner for large slew manoeuvers using a shape-based method. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.

Clarke, Joseph Andrew (2013) Moisture flow modelling within the ESP-r integrated building performance simulation system. Journal of Building Performance Simulation, 6 (5). pp. 385-399. ISSN 1940-1493

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Derivation of forces acting on the liquid weld metal based on arc pressure measurements produced using alternating shielding gases in the GTAW process. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09.

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) GMAW shielding gas flow optimisation by refinement of nozzle geometry. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09.

Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161

Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M. (2013) Buckling analysis of stiffened variable angle tow skins using energy methods. In: 17th International Conference on Composite Structures, ICCS17, 2013-06-17 - 2013-06-21.

Chen, Haofeng and Gorash, Yevgen (2013) Novel direct method on the life prediction of component under high temperature-creep fatigue conditions. In: 13th International Conference on Fracture, 2013-06-16 - 2013-06-21, The China National Convention Center (CNCC).

Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2013) Design and trade-offs of a pole-sitter mission. In: 3rd International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13.

Campo-Deaño, Laura and Dullens, Roel P. and Aarts, Dirk and Pinho, F.T. and Oliveira, Monica (2013) Viscoelasticity of blood and viscoelastic blood analogues for use in polydymethysyloxane in vitro models of the circulatory system. Biomicrofluidics, 7 (3). Article 034102. ISSN 1932-1058

Cairns, Jonathan and McPherson, Norman and Galloway, Alexander and MacPherson, M. and McKechnie, C. (2013) Optimised penetration for fillet welding. In: 17th International Conference on Joining Materials, JOM 17, 2013-05-05 - 2013-05-08.

Ceccaroni, Marta and Biggs, James (2013) Analytic perturbative theories in highly inhomogeneous gravitational fields. Icarus, 224 (1). pp. 74-85. ISSN 0019-1035

Cater, Stephen R. and Martin, Jonathan and Galloway, Alexander and McPherson, Norman (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. In: Symposium on Friction Stir Welding and Processing, 2013-03-03.

Chen, Haofeng and Ure, James Michael and Tipping, David (2013) Calculation of a lower bound ratchet limit part 1 – Theory, numerical implementation and verification. European Journal of Mechanics - A/Solids, 37. pp. 361-368. ISSN 0997-7538

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2013) Orbit evolution, maintenance and disposal of SpaceChip swarms through electro-chromic control. Acta Astronautica, 82 (1). pp. 25-37. ISSN 0094-5765

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Techno-economic evaluation of reducing shielding gas consumption in GMAW whilst maintaining weld quality. International Journal of Advanced Manufacturing Technology, 63 (9-12). pp. 975-985.

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2012) Orbital dynamics of high area-to-mass ratio spacecraft with J2 and solar radiation pressure for novel Earth observation and communication services. Acta Astronautica, 81 (1). pp. 137-150. ISSN 0094-5765

Ceriotti, Matteo and Diedrich, Benjamin and McInnes, Colin (2012) Novel mission concepts for polar coverage : An overview of recent developments and possible future applications. Acta Astronautica, 80. pp. 89-104. ISSN 0094-5765

Ceccaroni, Marta and Biggs, James (2012) Analytical perturbation method for frozen orbits around the asteroid 433 Eros. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.

Ceriotti, Matteo and McInnes, Colin (2012) Design of trajectories for continuous polar Earth observation in the Earth-Moon system. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.

Clark, Ruaridh and Sinn, Thomas and Lucking, Charlotte and Donaldson, Nathan and Brown, Roy Hutton and Parry, Thomas (2012) StrathSat-R : Deploying inflatable CubeSat structures in micro gravity. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.

Colombo, Camilla and Xu, Ming and McInnes, Colin (2012) Stabilisation of the hyperbolic equilibrium of high area-to-mass spacecraft. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05.

Ceccaroni, Marta and Biggs, James and Biasco, Luca (2012) Analytic estimates and topological properties of the weak stability boundary. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 1-24. ISSN 0923-2958

Ceriotti, Matteo and McInnes, Colin (2012) Natural and sail-displaced doubly-symmetric Lagrange point orbits for polar coverage. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 151-180. ISSN 0923-2958

Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2012) Analytical method for perturbed frozen orbit around an asteroid in highly inhomogeneous gravitational fields. In: 2012 Analytical Methods in Celestial Mechanics, 2012-09-26 - 2012-09-29.

Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Novel pole-sitter mission concepts for continuous polar remote sensing. In: SPIE Remote Sensing Conference 2012, 2012-09-24 - 2012-09-27.

Caboni, Marco and Minisci, Edmondo and Campobasso, Michele Sergio and Padulo, M. (2012) Robust aerodynamic design optimization of variable speed wind turbine rotors. In: 10th Aerodynamic Design Optimisation Seminar, ADOS 2012, 2012-09-13 - 2012-09-14.

Clarke, Joseph Andrew and Cockroft, Jeremy and Hand, Jon and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) Embedding building simulation constructs within focused applications. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11.

Clarke, Joseph Andrew and Hand, Jon and Kelly, Nicolas and Malik, Asma and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) A data model for integrated building performance simulation. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11.

Campo-Deaño, Laura and Dullens, Roel P. and Carneiro, R.D. and Pinho, F.T. and Oliveira, Monica (2012) A new blood analogue solution applications from micro- to milli-channels. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2012) Study on the blockage mechanism in low viscosity Boger-like fluid flows through unconsolidated beds. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Carneiro, J. and Campo-Deaño, Laura and Oliveira, Monica and Pinho, F.T. (2012) Flow of blood analogue fluids through simplified intercranial aneurisms : effect of geometrical parameters. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Costa, E.D. and Carneiro, J. and Oliveira, Monica and Campos, J.B.L.M. and Miranda, J.M. (2012) Fabrication of milli-scale channels for hemodynamc studies. In: 15th International Conference on Experimental Mechanics, 2012-07-22 - 2012-07-27.

Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) Linear matching method on the evaluation of cyclic behaviour with creep effect. In: ASME Pressure Vessels and Piping Conference 2012, 2012-07-15 - 2012-07-20.

Crowley, B. J. B. and Bingham, R. and Evans, R. G. and Gericke, D. O. and Landen, O. L. and Murphy, C. D. and Norreys, P. A. and Rose, S. J. and Tschentscher, Th and Wang, C. H. -T and Wark, J. S. and Gregori, G. (2012) Testing quantum mechanics in non-Minkowski space-time with high power lasers and 4th generation light sources. Scientific Reports, 2. 491. ISSN 2045-2322

Chacón-Nava, José G. and Almeraya-Calderón, F. and Orozco-Carmona, V.M. and Martínez-Villafañe, Alberto and Stack, Margaret; (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE, PER.

Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2012) A potential solution to GMAW gas flow optimisation. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Artificial neural network prediction of weld geometry performed using GMAW with alternating shielding gases. Welding Journal, 91 (6). 174S-181S. ISSN 0043-2296

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2012) Evaluation of gas metal arc welding with alterating shielding gases for use on AA6082T6. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226. pp. 992-1000. ISSN 2041-2975

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, Fernando T. and Alves, Manuel A. and Oliveira, Monica (2012) Nanogel formation of polymer solutions flowing through porous media. Soft Matter, 8 (24). pp. 6445-6453. ISSN 1744-6848

Colombo, Camilla and McInnes, Colin (2012) Orbit design for future SpaceChip swarm missions in a planetary atmosphere. Acta Astronautica, 75. pp. 25-41. ISSN 0094-5765

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.

Chen, Weihang and Chen, Haofeng (2012) Cyclic J integral using linear matching method. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.

Clarke, Joseph Andrew (2012) The implementation of diffuse radiation shading computation in ESP-r. In: eSim 2012 Building Simulation Conference, 2012-05-01 - 2012-05-04.

Clarke, Joseph Andrew and Ghauri, Sabeeta and Johnstone, Cameron and Samuel, Aizaz (2012) Domestic upgrade policy development. In: eSim 2012 Building Simulation Conference, 2012-05-01 - 2012-05-04.

Camilleri, Duncan (2012) Thermo-mechanical behaviour of DBC substrate assemblies subject to soldering fabrication processes. Soldering and Surface Mount Technology, 24 (2). pp. 100-111. ISSN 0954-0911

Chacón-Nava, José G. and Almeraya-Calderón, F. and Martínez-Villafañe, Alberto and Stack, Margaret; (2012) Low impact velocity wastage in FBCs : experimental results and comparison between abrasion and erosion theories. In: Abrasion resistance of materials. In-Tech Open Publishers, Croatia. ISBN 9799533070369

Ceccaroni, Marta and Biggs, James and Biscani, Francesco (2012) Analytical perturbative theories of motion in highly inhomogeneous gravitational fields : Ariadna AO/1-6790/11/NL/CBI. [Report]

Ceccaroni, Marta and Biggs, James (2012) Low thrust propulsion in a coplanar circular restricted four body problem. Celestial Mechanics and Dynamical Astronomy, 112 (2). pp. 191-219. ISSN 0923-2958

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2012) On shakedown, ratchet and limit analysis of defective pipeline. Journal of Pressure Vessel Technology, 134 (1). 011202. ISSN 0094-9930

Counsell, John and Brindley, Joseph and Murphy, Gavin Bruce and Khalid, Yousaf Ali (2012) Nonlinear controller design methods for modern building heating and ventilation systems using inverse dynamics. Intelligent Buildings International. ISSN 1750-8975 (Unpublished)

Ceriotti, Matteo and McInnes, Colin (2011) Systems design of a hybrid sail pole-sitter. Advances in Space Research, 48 (11). pp. 1754-1762. ISSN 0273-1177

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Flow of low viscosity Boger fluids through a microfluidic hyperbolic contraction. Journal of Non-Newtonian Fluid Mechanics, 166 (21-22). pp. 1286-1296. ISSN 0377-0257

Colombo, Camilla and McInnes, Colin (2011) Orbital dynamics of 'smart dust' devices with solar radiation pressure and drag. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1613-1631. ISSN 1533-3884

Ceccaroni, Marta and Biggs, James (2011) Nonlinearly stable equilibria in the Sun-Jupiter-Trojan-Spacecraft four body problem. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Ceriotti, Matteo and McInnes, Colin and Diedrich, Benjamin (2011) The pole-sitter mission concept : an overview of recent developments and possible future applications. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2011) Orbital dynamics of high area-to-mass ratio spacecraft under the influence of J2 and solar radiation pressure. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2011) Techno-economic evaluation on the effects of alternating shielding gases for advanced joining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (10). pp. 1863-1872. ISSN 2041-2975

Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard; (2011) The potential impact of policy and legislation on the energy demands of UK buildings and implications for the electrical network. In: The Future of Electricity Demand. Supergen Flexnet Book, Part IV P . Cambridge University Press, Cambridge, UK. ISBN 978-1-107-00850-2

Cavallero, Claudio and Chiarelli, Cosimo and Mareschi, Vincenzo and Davite, Alessio and Gallizio, Federico and Minisci, Edmondo and Sudars, Martins (2011) Multi-disciplinary shape optimization of an entry capsule integrated with custom neural network approximation and multi-delity approach. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16.

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica; (2011) Gel formation of low viscous Boger fluids under high shear and extensional strain rate flow conditions. In: Rheology Trends. UNSPECIFIED, PRT. ISBN 978-972-8669-50-8

Counsell, John and Khalid, Yousaf Ali (2011) Controllability of buildings : a multi-input multi-output stability assessment method for buildings with fast acting heating systems. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07.

Counsell, John and Strachan, Paul and Johnston, James Rm (2011) Trends in office internal gains and the impact on space heating and cooling demands. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07.

Ceriotti, Matteo and McInnes, Colin (2011) Hybrid solar sail and SEP propulsion for novel Earth observation missions. Acta Astronautica, 69 (9-10). pp. 809-821. ISSN 0094-5765

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2011) Boger fluid flow through hyperbolic contraction microchannels. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24.

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels & Piping Conference, PVP 2011, 2011-07-17 - 2011-07-21.

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Effect of circular holes on the ratchet limit and crack tip plastic strain range in a centre cracked plate. Engineering Fracture Mechanics, 78 (11). pp. 2310-2324. ISSN 0013-7944

Ceriotti, Matteo and McInnes, Colin (2011) Generation of optimal trajectories for Earth hybrid pole sitters. Journal of Guidance, Control and Dynamics, 34 (3). pp. 847-859. ISSN 1533-3884

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Shakedown analysis of a composite cylinder with a cross-hole. Journal of Pressure Vessel Technology, 133 (3). 031206. ISSN 0094-9930

Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kelly, Nicolas (2011) The implementation of discrete demand management algorithms within energy systems modelling. In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.

Counsell, John and Stewart, Matt John and Logan, Rufus and Doran, Sean and Ward, Wayne (2011) A novel DSM philosophy for building integrated renewable systems. In: 2nd International Conference in Microgeneration and Related Technologies, 2011-04-04 - 2011-04-06.

Counsell, John M. and Khalid, Yousaf A. and Brindley, Joseph (2011) Controllability of buildings : a multi-input multi-output stability assessment method for buildings with slow acting heating systems. Simulation Modelling Practice and Theory, 19 (4). pp. 1185-1200. ISSN 1569-190X

Carus, David and Hamilton, Robert (2011) Training shoe will improve mobility in elderly people. The Scotsman.

Clarke, Joseph and Bradley, Fiona and Nugent, Karen (2011) Embedding Simplified Post Occupancy Evaluation Within The Design Process. In: CIC Start Online: Webinar 1 - Embedding Simplified Post Occupancy Evaluation within the Design Process, 2011-01-25 - 2011-01-25. (Unpublished)

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Gel formation of low viscous Boger fluids under high shear and extensional strain rate flow conditions. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09.

Ceriotti, M. and Vasile, M. (2010) MGA trajectory planning with an ACO-inspired algorithm. Acta Astronautica, 67 (9-10). pp. 1202-1217. ISSN 0094-5765

Chen, Haofeng (2010) Linear matching method for design limits in plasticity. Computers, Materials and Continua - Tech Science Press, 20 (2). pp. 159-183. ISSN 1546-2218

Colombo, C. and Lucking, Charlotte and McInnes, C.R. (2010) Orbit evolution, maintenance and disposal of SpaceChip swarms. In: 6th International Workshop on Satellite Constellation andFormation Flying, IWSCFF 2010, 2010-01-01 - 2010-01-03.

Clarke, Joseph and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie Eugenia (2010) Analysis of a single point tensioned mooring system for station keeping of a contra-rotating marine current turbine. IET Renewable Power Generation, 4 (6). pp. 473-487. ISSN 1752-1416

Cattani, Carlo and Seyraman, Alexander and Trendafilova, Irina (2010) Nonlinear vibrations, stability, analysis and control. Mathematical Problems in Engineering, 3. 873047. ISSN 1024-123X

Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16.

Ceccaroni, M. and Biggs, J.D. (2010) Extension of low-thrust propulsion to the autonomous coplanar circular restricted four body problem with application to future Trojan Asteroid missions. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.

Ceriotti, M. and McInnes, C.R. (2010) Hybrid solar sail and SEP propulsion for novel Earth observation missions. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.

Colombo, C. and McInnes, C.R. (2010) Orbit design for future SpaceChip swarm missions. In: 61st Aeronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01.

Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron (2010) Assessing the impact of demand management on the viability of polygeneration at the urban scale. In: 11th World Renewable Energy Congress, WREC XI, 2010, 2010-09-25 - 2010-09-30.

Ceriotti, M. and Vasile, M. (2010) Automated multigravity assist trajectory planning with a modified ant colony algorithm. Journal of Aerospace Computing, Information, and Communication, 7 (9). pp. 261-293. ISSN 1542-9423

Colombo, C. and McInnes, C.R. (2010) Orbital dynamics of earth-orbiting 'smart dust' spacecraft under the effects of solar radiation pressure and aerodynamic drag. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05.

Ceriotti, M. and McInnes, C.R. (2010) An earth pole-sitter using hybrid propulsion. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05.

Counsell, J.M. and Zaher, O.S. and Brindley, Joseph; (2010) Auto-tuning for high performance autopilot design. In: AIAA guidance, navigation, & control conference et al (2010) online proceedings. American Institute of Aeronautics and Astronautics, Toronto, Canada.

Chacón-Nava, José G. and Martínez-Villafañe, Alberto and Almeraya-Calderón, F. and Cabral-Miramontes, J.A. and Stack, Margaret (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X

Chen, H.F. and Ponter, Alan R.S. (2010) A direct method on the evaluation of ratchet limit. Journal of Pressure Vessel Technology, 132 (4). 041202. ISSN 0094-9930

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2010) Shakedown behaviour of composite cylinders with cross holes. In: Proceedings of the ASME Pressure Vessels and Piping Conference 2010, 2010-07-18 - 2010-07-22.

Ceriotti, M. and McInnes, C.R. (2010) A near term pole-sitter using hybrid solar sail propulsion. In: 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22.

Carmichael, Rory and Mackenzie, Donald; (2010) Elastic-plastic design by analysis for gross plastic collapse. In: Proceedings of the ASME pressure vessels and piping conference 2010. Pressure Vessels and Piping Division of ASME, 2 . American Society of Mechanical Engineers, USA, pp. 81-87. ISBN 978-0-7918-4921-7

Ceriotti, M. and Vasile, M. (2010) An ant system algorithm for automated trajectory planning. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23, Barcelona, Spain.

Ceriotti, M. and Vasile, M.; (2010) An ant system algorithm for automated trajectory planning. In: 2010 Congress on evolutionary computation (CEC). IEEE Congress on Evolutionary Computation . IEEE, Barcelona, Spain. ISBN 9781424481262

Carus, D. (2010) The European project SMILING : self mobility improvement in the ederly by counteracting falls. In: 17th PRM European Congress, European Society of Physical and Rehabilitation Medicine, 2010-05-23 - 2010-05-27. (Unpublished)

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866

Clarke, J.A. and Johnstone, C.; Hall, M.R., ed. (2010) Assessing and benchmarking the performance of advanced building facades. In: Materials for Energy Efficiency and Comfort in Buildings. Woodhead Energy Series . Woodhead Publishing, Cambridge, pp. 484-502. ISBN 1845695267

Clarke, Joseph Andrew and Ali, Sheikh (2010) A preliminary analysis of the tradability of future micro-grid networks. In: Control Methodologies and Technology for Energy Efficiency, CMTEE 2010, 2010-03-29 - 2010-03-31.

Croisard, Nicolas and Vasile, Massimiliano and Kemble, Stephen and Radice, Gianmarco (2010) Preliminary space mission design under uncertainty. Acta Astronautica, 66 (5-6). pp. 654-664. ISSN 0094-5765

Counsell, John M. (2010) Powering of Devices. GB 1002832.2.

Chen, Haofeng (2010) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. Journal of Pressure Vessel Technology, 132 (1). 011202. ISSN 0094-9930

Ceriotti, M. (2010) Global optimisation of multiple gravity assist trajectories. PhD thesis, University of Glasgow.

Colombo, Camilla and Radice, Gianmarco and Vasile, Massimiliano (2010) Optimal trajectory design for interception and deflection of Near Earth Objects. PhD thesis, University of Glasgow.

Counsell, John and Scott, Alastair and Khalid, Yousaf Ali and Murphy, Gavin Bruce and Stewart, Matt John and Brindley, Joseph (2010) BRE Centre of Excellence in Energy Utilisation. BRE Trust Review (1st Ed). IHS BRE Press, Berkshire. ISBN 9781848061354

Campobasso, M and Zanon, A and Minisci, Edmondo and Bonfiglioni, A (2009) Wake-tracking and turbulence modelling in computational aerodynamics of wind turbine aerofoils. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (8). pp. 939-951. ISSN 0957-6509

Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2009) Optimal low-thrust trajectories to asteroids through an algorithm based on differential dynamic programming. Celestial Mechanics and Dynamical Astronomy, 105 (75). pp. 75-112. ISSN 0923-2958

Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J. (2009) Practical application of CFD for wind loading on tall buildings. In: 7th International Conference on Tall Buildings, 2009-10-29 - 2009-10-30, Hong Kong, China.

Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J.; Au, F.T.K., ed. (2009) Practical application of CFD for wind loading on tall buildings. In: Proceedings of the 7th international conference on tall buildings. Research Publishing Services, Hong Kong, China, pp. 767-776. ISBN 9789628014194

Cerdeira, T. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Monteiro, F. and Imai, Y and Yamaguchi, Y.; (2009) Determination of the cell-freelayer in circular PDMS microchannels. In: Proceedings of VIPIMAGE-II ECCOMAS. UNSPECIFIED, Portugal, p. 357.

Ceriotti, M. and Vasile, M. (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.

Ceriotti, M. and Vasile, M. (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16.

Clarke, J.A. and Yaneske, P.P. (2009) A rational approach to the harmonisation of the thermal properties of building materials. Building and Environment, 44 (10). pp. 2046-2055. ISSN 0360-1323

Ceriotti, M. and Vasile, M. (2009) Automatic MGA trajectory planning with a modified ant colony optimization algorithm. In: 21st International Space Flight Dynamics Symposium, ISSFD 2009, 2009-09-28 - 2009-10-02.

Correia, Antónia and Cavadas, A. and Afonso, A.M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2009) Numerical investigation of laminar flow in symmetric and asymmetric complex T-channels for micro-mixing. In: III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia, 2009-09-17 - 2009-09-18.

Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie (2009) Contra-rotating marine current turbines : single point tethered floating system - stabilty and performance. In: 8th European Wave and Tidal Energy Conference, EWTEC 2009, 2009-09-07 - 2009-09-10.

Counsell, John and Khalid, Yousaf Ali (2009) An holistic approach to assess the design and simulation of intelligent building control systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15.

Counsell, John M. and Khalid, Yousaf A. (2009) A holistic analysis method to assess the controllability of commercial buildings and their systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15.

Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2009) Semi-analytical solution for the optimal low-thrust deflection of near-Earth objects. Journal of Guidance, Control and Dynamics, 32 (3). pp. 796-809. ISSN 1533-3884

Counsell, John M. and Brindley, Joseph and Macdonald, Malcolm (2009) Non-linear autopilot design using the philosophy of variable transient response. In: AIAA Guidance, Navigation and Control Conference, 2009-08-10 - 2009-08-13.

Clarke, Joseph Andrew and Ghauri, Sabeeta and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2009) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.

Clarke, Joseph Andrew and Humphreys, Michael A. and Nicol, J. Fergus and Rijal, Hom B. and Tuohy, Paul Gerard (2009) The thermal simulation of an office building implementing a new behavioural algorithm for window opening and the use of ceiling fans. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.

Cockroft, Jeremy and Ghauri, Sabeeta and Samuel, Aizaz Aamir and Tuohy, Paul Gerard (2009) Complex energy simlulation using simplified user interaction mechanisms. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.

Cockroft, Jeremy and Kennedy, D. and O'Hara, Martin and Samuel, Aizaz Aamir and Strachan, Paul and Tuohy, Paul Gerard (2009) Development and validation of detailed building, plant and controller modelling to demonstrate interactive behaviour of system components. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.

Chen, Haofeng (2009) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30.

Chen, Haofeng and Ponter, Alan R.S. (2009) Structural integrity assessment of superheater outlet penetration tubeplate. International Journal of Pressure Vessels and Piping, 86 (7). pp. 412-419. ISSN 0308-0161

Clarke, J.A. and Conno, G. and Grant, A.D. and Johnstone, C. (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, 2009-05-31 - 2009-06-05, Hawaii, USA.

Clarke, J.A. and Connor, Gary and Grant, A.D. and Johnstone, C.; (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: OMAE 2009. American Society of Mechanical Engineers, New York, pp. 1065-1073. ISBN 9780791843444

Clarke, J.A. and Johnstone, C. and Kim, J.M. and Tuohy, P.G. (2009) Energy, carbon and cost performance of building stocks : upgrade analysis, energy labelling and national policy development. Advances in Building Energy Research, 3 (1). pp. 1-20. ISSN 1751-2549

Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, 2009-05-31 - 2009-06-05.

Croisard, Nicolas and Vasile, Massimiliano; (2009) System engineering design optimisation under uncertainty for preliminary space mission. In: 2009 IEEE Congress on Evolutionary Computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE, NOR, pp. 324-331. ISBN 978-1-4244-2958-5

Carnelli, L. and Dachwald, Bernd and Vasile, Massimiliano (2009) Evolutionary neurocontrol: A novel method for low-thrust gravity-assist trajectory optimization. Journal of Guidance, Control and Dynamics, 32 (2). pp. 616-625. ISSN 1533-3884

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). 011203. ISSN 0094-9930

Ceriotti, M. and Vasile, M. and Giardini, G. and Massari, M. (2009) An approach to model interest for planetary rover through Dezert-Smarandache Theory. Journal of Aerospace Computing, Information, and Communication, 6 (2). pp. 92-108. ISSN 1542-9423

Counsell, John M. and Haughton-Brown, Chris and Tuff, Simon (2009) Renewable power for lean desktops in media applications. In: IBC 2009 Conference, 2009-09-10 - 2009-09-15.

Clarke, Joseph Andrew and Johnstone, Cameron and Kelly, Nicolas and Strachan, Paul and Tuohy, Paul Gerard (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Energy Policy, 36 (12). pp. 4605-4609. ISSN 0301-4215

Clarke, J. A. and Johnstone, C. M. and Kelly, N. J. and Strachan, P. A. and Tuohy, P. (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Other. Office of Science and Innovation, London.

Clarke, Joe and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie (2008) A contra-rotating marine current turbine on a flexible mooring : development of a scaled prototype. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17.

Connor, G. and Grant, A.D. and Johnstone, C.M. (2008) Development of a European tidal energy road map. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17. (Unpublished)

Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2008) Interception and deviation of near Earth objects via solar collector strategy. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03.

Clarke, Joe (2008) Computational tools for low energy building design : capabilities and requirements. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.

Clarke, Joe and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie Eugenia (2008) Contra-rotating marine current turbines : performance in field trials and power train developments. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.

Counsell, John and Khalid, Yousaf Ali (2008) Controllability of modern commercial buildings. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)

Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kim, Jae Min (2008) The application of demand-side management via internet-enabled monitoring and control. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)

Clarke, Joseph Andrew and Johnstone, Cameron and Kim, Jae Min and Kokogiannakis, Georgios and Strachan, Paul and Woo, K. and Kang, B. (2008) Study of the energy performance of Korean apartment buildings with alternative balcony configurations. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25. (Unpublished)

Chernyshenko, S.I. and Castro, I.P. and Hetsch, T. and Iollo, A. and Minisci, Edmondo and Savelsberg, R. (2008) Vortex cell shape optimization for separation control. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04.

Colombo, Camilla and Vasile, Massimiliano and Radice, Gianmarco (2008) An algorithm based on differential dynamic programming for low-thrust trajectories. In: New Trends in Astrodynamics and Applications V, 2008-06-30 - 2008-07-02.

Clive, P.J.M. and Chindurza, I. and Ravey, I. and Bass, J. and Boyle, R.J. and Jones, P. and Lang, S.J. and Bradley, S. and Hay, L. and Oldroyd, Andrew and Stickland, M.T. (2008) The Myres Hill remote sensing intercomparison study: preliminary results. In: 14th International Symposium for the Advancement of Boundary Layer Remote Sensing, 2008-06-23 - 2008-06-25.

Camilleri, D. and Gray, T.G.F. and Nash, D.H.; (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, Cranfield.

Clarke, J A and Ghauri, Sabeeta and Johnstone, C M and Kim, J M and Tuohy, P G (2008) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: eSim 2008, 2008-05-20 - 2008-05-23.

Camilleri, Duncan (2008) Integrating finite element analysis in design and manufacture of welded structures. In: 17th Annual Conference on Marine Engineering: Beyond Our Shores, 2008-04-17 - 2008-04-17, Malta.

Crawley, Drury B. and Hand, Jon W. and Kummert, Michael and Griffith, Brent T. (2008) Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43 (4). pp. 661-673. ISSN 0360-1323

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). 011202. ISSN 0094-9930

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18.

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2007) Computational methods and experimental validation of welding distortion models. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 235-249. ISSN 1464-4207

Ceriotti, M. and Colombo, C. and Croisard, Nicolas and McLean, Timothee (2007) Preliminary mission analysis for the ESMO mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.

Ceriotti, M. and Vasile, M. and Bombardelli, Claudio (2007) An incremental algorithm for fast optimisation of multiple gravity assist trajectories. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.

Colombo, Camilla and Novak, Daniel and Heiligers, Jeannette (2007) Low-thrust trajectories design for the European Student Moon Orbiter mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28.

Clarke, Joseph Andrew and Kelly, Nicolas and Tang, Dechao (2007) A review of ESP-r's flexible solution approach and its application to prospective technical domain developments. Advances in Building Energy Research, 1 (1). pp. 227-247.

Clarke, J.A. and Hong, Jun and Johnstone, C. and Kelly, N.J.; (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building Simulation. Springer Verlag, Germany, pp. 1654-1660. ISBN 1996-3599

Clarke, Joseph Andrew and Hong, Jun and Johnstone, Cameron and Kelly, Nicolas; Jiang, Y and Zhu, Y.X. and Yang, X.D. and Li, X.T., eds. (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building simulation 2007 proceedings. Tsinghua University Press, Beijing, pp. 1653-1660. ISBN 9780977170630

Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836

Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron (2007) Performance evaluation of a dual contra rotating rotor tidal turbine. In: 7th European Wave and Tidal Energy Conference, 2007-09-11 - 2007-09-14.

Camilleri, D. and Mackenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089

Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Clarke, J. A. and Connor, G and Grant, A. D. and Johnstone, C. M. (2007) Design and testing of a contra-rotating tidal current turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (A2). pp. 171-179. ISSN 0957-6509

Camilleri, D. and Naruse, T. and Mackenzie, D. (2007) Gross plastic deformation of a hemispherical head with cylindrical nozzle: a comparative study. In: Pressure Vessel Technologies for the Power and Process Industries (PVP2007/CREEP8), 2007-07-01.

Camilleri, D. and Naruse, T. and Mackenzie, D.; (2007) An investigation of allowable static loads calculated by design by analysis. In: Proceedings of the ASME Pressure Vessels and Piping Conference. ASME. ISBN 0791842800

Ceriotti, M. and Croisard, Nicolas and Vasile, Massimiliano (2007) A non-deterministic planner for planetary rovers. In: International Joint Conference on Artificial Intelligence (IJCAI), 2007-01-06 - 2007-01-12.

Croisard, Nicolas and Ceriotti, M. and Vasile, Massimiliano (2007) Uncertainty modelling in reliable preliminary space mission design. In: International Joint Conference on AI (IJCAI), 2007-01-06 - 2007-01-12.

Choi, W. and Kim, Jae Min (2007) A study on the thermal modelling method of the under-floor heating system in apartment. Journal of the Architectural Institute of Korea Planning and Design, 23. pp. 175-184. ISSN 1226-9093

Clarke, J. A. and Connor, G. and Grant, A. D. and Johnstone, C. M. and Mackenzie, D.; (2007) Development of a contra-rotating tidal current turbine and analysis of performance. In: Proceedings of the 7th european wave and tidal energy conference. EWTEC, Southampton. ISBN 9789899507937

Clarke, J.A. and Hand, J. and Kim, J.M. and Prazeres, L.M.R. (2007) Delivering building simulation information via new communication media. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

Clarke, Joseph Andrew and Johnstone, Cameron and Hong, Jun and Kim, Jae Min and Strachan, Paul and Hwang, I. and Li, Hongjun (2007) A multi-criteria performance study of an integrated demand/supply energy system for low and zero carbon technologies within domestic building design. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06.

Clarke, Joseph Andrew and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2007) Energy and carbon performance of housing : upgrade analysis, energy labelling and national policy development. In: Scottish Energy Systems Group Conference, 2007-07-03.

Camilleri, D. and Gray, T.G.F. and Mollicone, P. (2006) Computational methods and experimental validation of welding distortion simulation. In: Modelling of Manufacturing Processes Seminar, 2006-12-01.

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2006) Alternative simulation techniques for distortion of thin plate due to fillet-welded stiffeners. Modelling and Simulation in Materials Science and Engineering, 14 (8). pp. 1307-1327. ISSN 0965-0393

Camilleri, D. and Gray, T.G.F. (2006) Optimization of welded lightweight multiple-stiffener plate structures to minimise unwanted shape distortion. Welding and Cutting, 7 (6). pp. 320-327. ISSN 1612-3433

Ceriotti, M. and Colombo, C. and Vasile, M. (2006) Trajectory design and optimisation for lunar transfer. In: 1st Hellenic-European Student Space Science and Technology Symposium, 2006-10-09 - 2006-10-11.

Ceriotti, Matteo and Vasile, Massimiliano and Giardini, Giovanni and Massari, Mauro (2006) Non deteriministic planning with evidence and paradoxical reasoning theories. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.

Colombo, Camilla and S. Cuartielles, Joan-Pau and Vasile, Massimiliano and Radice, Gianmarco (2006) A comparative assessment of different deviation strategies for dangerous NEO. In: AIAA 57th International Astronautical Congress, 2006-10-02 - 2006-10-06.

Cockroft, J. and Kelly, N.J. (2006) A comparative assessment of future heat and power sources for the UK domestic sector. Energy Conversion and Management, 47 (15-16). pp. 2349-2360. ISSN 0196-8904

Ceriotti, Matteo and Vasile, Massimiliano and Giardini, Giovanni and Massari, Mauro (2006) A non-deterministic planner for planetary rover autonomy. In: AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 2006-08-21 - 2006-08-24.

Camilleri, Duncan and Hamilton, Robert and Mackenzie, Donald (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Evaluating plastic loads in torispherical heads using a new criterion of collapse. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Camilleri, Duncan and Mackenzie, Donald and Hamilton, Robert (2006) Shakedown of a thick cylinder with a radial crosshole. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27.

Chen, H. F. and Ponter, Alan R.S. and Specchia, G. and Ciavarella, M. (2006) Shakedown analysis for rolling and sliding contact problems. International Journal of Solids and Structures, 43 (14-15). pp. 4201-4219. ISSN 0020-7683

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Simple thermo-elastic-plastic models for welding distortion simulations. Journal of Materials Processing Technology, 176 (1-3). pp. 77-86. ISSN 0924-0136

Camilleri, D. and Mackenzie, D. and Hamilton, R.; Armstrong, Cecil, ed. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.

Camilleri, D. and Mollicone, P. and Comlekci, T. and Gray, T.G.F.; Armstrong, Cecil, ed. (2006) Computational methods for the prediction of out-of-plane deformation in thin plate welded structures. In: Computational Mechanics in the UK: Proceedings of a Joint Conference of The Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation. Queen's University Belfast, pp. 7-10.

Chen, Haofeng and Ponter, Alan R.S. (2006) Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading. International Journal for Numerical Methods in Engineering, 68 (1). pp. 13-32. ISSN 0029-5981

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Thermal distortion of stiffened plate due to fillet welds : computational and experimental investigation. Journal of Thermal Stresses, 29 (2). pp. 111-137. ISSN 0149-5739

Carus, D. and Grant, C. and Wattie, R. and Pridham, M.S. (2006) Development and validation of a technique to measure and compare the opening characteristics of tamper-evident bottle closures. Packaging Technology and Science, 19 (2). pp. 105-118. ISSN 0894-3214

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 123-135. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 136-147. ISSN 0308-0161

Chen, J.F. and Pan, W. (2006) Three dimensional stress distribution in FRP-to-concrete bond test specimens. Construction and Building Materials, 20 (1-2). pp. 46-58. ISSN 0950-0618

Clarke, J. and Hong, J. and Kim, J. and Strachan, P. and Hwang, I. and Li, H. (2006) A strategic study of energy efficient and hybrid energy system options for a multi-family building in Korea. In: EuroSun 2006 International Renewable Energy Conference, 2006-06-27 - 2006-06-30.

Clarke, J. A. and Macdonald, I. A. and Nicol, J. F.; (2006) Predicting adaptive responses - simulating occupied environments. In: Proceedings of international comfort and energy use in buildings conference. Network for Comfort and Energy Use in Buildings (NCEUB), GBR.

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C.M.; (2006) Design and initial testing of a contra-rotating tidal current turbine. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671

Clarke, Joseph Andrew; (2006) Trends in building energy modelling and simulation. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671

Clarke, Joseph Andrew and Grant, Andrew and Connor, Gary and Johnstone, Cameron (2006) Regulating the output characteristics of tidal current power stations to facilitate better base load matching over the lunar cycle. Renewable Energy, 31 (2). pp. 173-180. ISSN 0960-1481

Camilleri, D. and Gray, T.G.F. (2005) Computationally efficient welding distortion simulation techniques. Modelling and Simulation in Materials Science and Engineering, 13 (8). pp. 1365-1382. ISSN 0965-0393

Chen, Haofeng and Ponter, Alan R.S. (2005) On the behaviour of a particulate metal matrix composite subjected to cyclic temperature and constant stress. Computational Materials Science, 34 (4). pp. 425-441. ISSN 0927-0256

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Design support tool for prediction of welding distortion in multiply-stiffened plate structures experimental and computational investigation. Journal of Ship Production, 21 (4). pp. 219-234. ISSN 8756-1417

Carus, D. (2005) Getting a grip. Packaging Professional, 28 (6). pp. 4-6. ISSN 1477-8467

Ceriotti, Matteo and Colombo, Camilla and Scarì, Ettore and Vasile, Massimiliano (2005) Halo orbit determination in the mission analysis of the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21.

Colombo, Camilla and Ceriotti, Matteo and Scarì, Ettore and Vasile, Massimiliano (2005) Trajectory optimization for the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computationally efficient welding simulation for out-of-plane distortion in double-sided fillet welding. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Carles, P. and Dadzie, K. (2005) Two typical time scales of the piston effect. Physical Review E, 71 (6). 066310. ISSN 1539-3755

Camilleri, D. and Comlekci, T. and Gray, T.G.F.; (2005) Finite element analysis of out-of-plane distortion in plates due to double-sided fillet-welded attachments. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005, Malta. NAFEMS, p. 88. ISBN 1-874376-03-4

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computational prediction of out-of-plane welding distortion and experimental investigation - Awarded Central Electricity Generating Board Prize. Journal of Strain Analysis for Engineering Design, 40 (2). pp. 161-176. ISSN 0309-3247

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. shakedown, reverse plasticity and ratchetting. International Journal of Pressure Vessels and Piping, 82 (2). pp. 85-94. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: creep relaxation and reverse plasticity. International Journal of Pressure Vessels and Piping, 82 (2). pp. 95-104. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) The linear matching method for shakedown and limit analyses applied to rolling and sliding point contact problems. Road Materials and Pavement Design, 6. pp. 9-30.

Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron; (2005) Design of a contra-rotating marine current turbine. In: Proceedings of the 6th European Wave and Tidal Energy Conference. EWTEC. ISBN 094764942-5

Clarke, Joseph Andrew and Connor, Gary and Grant, Andrew and Johnstone, Cameron; (2005) The impact of limiting tidal turbine capacity on the output characteristics from three complimentary tidal sites in Scotland over the lunar cycle. In: Proceedings of the 9th World Renewable Energy Congress (WREC). Elsevier.

Clarke, Joseph Andrew and Grant, Andrew and Johnstone, Cameron; Sayigh, A.A.M., ed. (2005) Output characteristics of tidal current power stations during spring and neap cycles. In: Proceedings of the 8th World Renewable Energy Congress. cpl press. ISBN 0080444709

Clarke, Joseph Andrew and Johnstone, Cameron and Lever, Monica and McElroy, L.B. and Prazeres, Luis and Strachan, Paul (2005) Thermal improvement of existing dwellings. Working paper. ESRU Publications, Glasgow.

Clarke, Joseph Andrew and Johnstone, Cameron and McElroy, L.B.; Imbabi, M.S. and Mitchell, C.P., eds. (2005) Application of a building energy performance system to assess domestic sector upgrading strategies for Scotland. In: Proceedings of the World Renewable Energy Congress : Innovation in Europe Regional Meeting. Elsevier, Oxford, United Kingdom. ISBN 0080446701

Craighead, I.A. and Gray, T.G.F. (2004) Investigation of diesel generator shaft and bearing failures. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 218 (3). pp. 153-158. ISSN 1464-4193

Chen, Haofeng and Ponter, Alan R.S. (2004) A simplified creep-reverse plasticity solution method for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 23 (4). pp. 561-577. ISSN 0997-7538

Clarke, Joseph Andrew (2004) Conserving the balance - a personal view. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). i-ii. ISSN 0957-6509

Camilleri, D. and Gray, T.G.F. and Comlekci, T.; (2004) Use of thermography to calibrate fusion welding procedures in virtual fabrication applications. In: InfraMation 2004. Infrared Training Centre.

Cartmell, M. and McInnes, C.R. and McKenzie, D. and Cartmell, Matthew P.; (2004) Proposals for an Earth-Moon mission design based on motorised momentum exchange tethers. In: Proceedings of the XXXII Summer School on Advanced Problems in Mechanics, APM 2004, St Petersburg. IPME RAS.

Chen, Haofeng and Ponter, Alan R.S. (2004) Integrity assessment for a tubeplate using linear matching method. International Journal of Pressure Vessels and Piping, 81. pp. 327-336. ISSN 0308-0161

Clarke, J. A. and Conner, S. and Fujii, G. and Geros, V. and Johannesson, G. and Johnstone, C. M. and Karatasou, S. and Kim, J. and Santamouris, M. and Strachan, P. A. (2004) The role of simulation in support of internet-based energy services. Energy and Buildings, 36 (8). pp. 837-846. ISSN 0378-7788

Clarke, J. A. and Tang, D.; (2004) A co-operating solver approach to building simulation. In: Proceedings of ESim 04 conference. IBPSA, CAN.

Clarke, Joseph Andrew and Grant, Andrew and Johnstone, Cameron; Chung, J.S. and Izumiyama, K. and Sayed, M. and Hong, S.W., eds. (2004) Output characteristics of tidal current power stations. In: Proceedings of the 14th (2004) International Offshore and Polar Engineering Conference Proceedings. International Offshore and Polar Engineering Conference Proceedings, 1 . International Society of Offshore and Polar Engineers, FRA, pp. 113-119. ISBN 1880653621

Clarke, Joseph Andrew and Johnstone, Cameron and Kondratenko, Irena and Lever, Monica and McElroy, Lori and Prazeres, Luis and McKenzie, F. and Strachan, Paul and Peart, G. (2004) Using simulation to formulate domestic sector upgrading strategies for Scotland. Energy and Buildings, 36 (8). pp. 759-770. ISSN 0378-7788

Clarke, J.A.; (2003) IT systems for energy and environment monitoring, planning, design and control. In: Solar Thermal Technologies for Buildings: The State of the Art. Buildings, Energy and Solar Technology . Earthscan Publications Ltd, p. 256. ISBN 9781902916477

Carus, D. and Doyle, M.J. (2003) The EU PACKAGE project. In: Faraday Packaging Partnership Conference, 2002-04-01.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Tan, H.C.P. and Gray, T.G.F. (2003) Investigation of temperature transients during flux-cored CO2 butt welding of CMn steel plates. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.

Clarke, J.A. and Grant, A.D. and Johnstone, C.; (2003) Development and performance evaluation of novel rotor-generators for tidal current energy conversion. In: Proceedings of the 6th Annual Parsons Turbine Conference. Maney Publishing. ISBN 1-904350-20-8

Chow, T.T. and Clarke, J.A. and Song, C.L.; (2003) The role of primitive part modelling within an integrative simulation environment. In: Proceedings of the 8th international building performance simulation association conference. IBPSA, pp. 187-194. ISBN 9038615663

Clarke, J. A. and Conner, S. and Geros, V. and Johnstone, C. M. and Karatasou, S. and Kim, J. and Santamouris, M. and Strachan, P. A.; (2003) Simulation support for internet-based energy services. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, NLD, pp. 187-194.

Clarke, J.A. and Johnstone, C. and Lever, M. and McElroy, L.B. and McKenzie, F. and Peart, G. and Prazeres, L.M.R. and Strachan, P.A.; (2003) Simulation support for the formulation of domestic sector upgrading strategies. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, NLD, pp. 219-226.

Chow, T.T. and Hand, J. and Strachan, P.A. (2003) Building-integrated photovoltaic and thermal applications in a subtropical hotel building. Applied Thermal Engineering, 23 (16). pp. 2035-2049. ISSN 1359-4311

Carles, P. and Dadzie, K. and Zhong, F. (2003) The piston effect as a means to measure near-critical bulk viscosity. In: UNSPECIFIED.

Comlekci, T. and Camilleri, D. and Gray, T.G.F.; (2003) Finite element representation on experimental surface deformation data from fusion welded plates. In: Computational Mechanics in the UK : proceedings of the 11th ACME-UK 2003 Conference. University of Strathclyde, Glasgow, UK, pp. 33-36.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Gray, T.G.F. (2003) Out-of-plane distortion of CMn steel plates during flux-cored CO2 automatic butt welding. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.

Citherlet, Stéphane and Macdonald, Iain (2003) Integrated assessment of thermal performance and room acoustics. Energy and Buildings, 35 (3). pp. 249-255. ISSN 0378-7788

Carus, D. (2003) Practicalities and openability of packaging. In: CCFRA Food Packaging Conference, 2003-01-01.

Carus, D. and Doyle, Mike (2003) The EU package project - bringing eCommerce into the home. In: Faraday Packaging Partnership Conference, 2002-04-01.

Chen, Haofeng and Engelhardt, M.J. and Ponter, Alan R.S. (2003) Linear matching method for creep rupture assessment. International Journal of Pressure Vessels and Piping, 80. pp. 213-220. ISSN 0308-0161

Clarke, J. and Dolado, J. J. and Harman, M. and Hierons, R. and Jones, B. and Lumkin, M. and Mitchell, B. and Mancoridis, S. and Rees, K. and Roper, M. and Shepperd, M. (2003) Reformulating Software Engineering as a Search Problem. IEE Proceedings Software, 150 (3). pp. 161-175. ISSN 1462-5970

Citherlet, S. and Hand, Jon (2002) Assessing energy, lighting, room acoustics, occupant comfort and environmental impacts performance of building with a single simulation program. Building and Environment, 37 (8-9). pp. 845-856. ISSN 0360-1323

Carus, D. (2002) PACKAGE - Provision for improved lifestyles via Access to Consumer pacKAGEs. In: Proceedings of the International Conference on Assistive Technology, ICAT 2002, The British Computer Society Disability Group, 2002-04-24 - 2002-04-25.

Cichocki, F.R. and Thomason, J.L. (2002) Thermoelastic anisotropy of a natural fiber. Composites Science and Technology, 62 (5). pp. 669-678. ISSN 0266-3538

Clarke, J.A.; (2002) Performance prediction tools for low impact building design. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, FRA.

Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, P.A. (2002) Simulation-assisted control in building energy management systems. Energy and Buildings, 34 (9). pp. 933-940. ISSN 0378-7788

Clarke, J.A. and Johnstone, C. and Kim, J. and Strachan, P.A.; (2002) On-line energy services for smart homes. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, FRA.

Clarke, J.A. and Macdonald, Iain and Stankov, P. and Denev, J. and Melikov, A.; (2002) Local comfort and air quality quantification via integrated building simulation. In: Proceedings of Roomvent 2002 - 8th International conference on air distribution in rooms. IOP, pp. 401-404. ISBN 87-989117-0-8

Crichton, B.H. and Fouracre, R.A. and Gouda, H.A. and Stickland, M.T.; (2002) Sessile water droplets on insulating surfaces subject to high AC stress effect of contact angle. In: 37th International Universities Power Engineering Conference. Staffordshire University, GBR. ISBN 190413307X

Clarke, J.A. (2001) Energy Simulation in Building Design. Butterworth - Heinemann, Oxford, UK. ISBN 9780750650823

Carus, D. (2001) European research themes. In: European Conference on Computational Mechanics and Engineering Practice, 2001-09-19 - 2001-09-21.

Craighead, I.A. and Thackery, S. and Redstall, M. and Thomas, M.R. (2001) Monitoring wood decay in poles by the vibroacoustic method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (8). pp. 905-917. ISSN 0954-4062

Citherlet, S. and Clarke, J.A. and Hand, Jon (2001) Integration in building physics simulation. Energy and Buildings, 33 (5). pp. 451-461. ISSN 0378-7788

Clarke, J.A. (2001) Domain integration in building simulation. Energy and Buildings, 33 (4). pp. 303-308. ISSN 0378-7788

Clarke, J.A.; (2001) Integrated building performance simulation. In: Proceedings of the 4th International Indoor Air Quality Ventilation and Energy Conservation in Buildings Conference (IAQVEC 2001). City University Hong Kong, CHN, pp. 1395-1404. ISBN 9624421900

Clarke, J.A. and Kelly, N.J. (2001) Integrating power flow modelling with building simulation. Energy and Buildings, 33 (4). pp. 333-340. ISSN 0378-7788

Carey, J.J. and Zawadzka, J. and Jaroszynski, D.A. and Wynne, K.; Li, T., ed. (2001) Thz-pulse studies of superluminal propagation in frustrated total internal reflection. In: Ultrafast Phenomena. OSA Trends in Optics and Photonics . Optical Society of America, pp. 238-240.

Chen, Haofeng and Ponter, Alan R.S. (2001) Shakedown and limit analyses for 3-D structures using the linear matching method. International Journal of Pressure Vessels and Piping, 78. pp. 443-451. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2001) A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 20 (4). pp. 555-571. ISSN 0997-7538

Chen, Haofeng and Ponter, Alan R.S. (2001) A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit. European Journal of Mechanics - A/Solids, 20 (4). pp. 539-553. ISSN 0997-7538

Chen, Haofeng and Shu, D.W. (2001) Simplified limit analysis of pipelines with multi-defects. Engineering Structures, 23 (2). pp. 207-213. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (2001) The load carrying capacity of the pressure vessel with two defects along axial direction. Key Engineering Materials, 177-180. pp. 757-762. ISSN 1013-9826

Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, Paul; (2001) Control in building energy management systems : the role of simulation. In: Proceedings of the 7th international building performance simulation association conference. IBPSA, pp. 99-106.

Clarke, J.A. and Hensen, J.; (2001) Integrated simulation for sustainable building design: an example state-of-the-art system. In: Proceedings of the International Construction Information Technology Conference (CIT 2000). CIB, Reykjavik, Iceland, pp. 465-475. ISBN 9979-9174-3-1

Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-I. (Ti,Nb)(C,N) particles. Acta Materialia, 48 (15). pp. 3857-3868. ISSN 1359-6454

Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-II. Non-titanium based particles. Acta Materialia, 48 (15). pp. 3869-3878. ISSN 1359-6454

Chen, Haofeng and Shu, D.W. (2000) Lower and upper bound limit analyses for pipeline with multi-slots of various configurations. International Journal of Pressure Vessels and Piping, 77 (1). pp. 17-25. ISSN 0308-0161

Chen, Haofeng and Shu, D.W. (2000) The effects of the distance between two defects on the load carrying capacity of pressure vessel. Journal of Pressure Vessel Technology, 122 (2). pp. 198-203. ISSN 0094-9930

Clarke, Joseph and Johnstone, Cameron and Kelly, Nicolas and McLean, Robert and Anderson, John and Rowan, Neil and Smith, John (1999) A technique for the prediction of the conditions leading to mould growth in buildings. Building and Environment, 34 (4). pp. 515-521. ISSN 0360-1323

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1999) On the solution of limit load and reference stress of 3-D structures under multi-loading systems. Engineering Structures, 21 (6). pp. 530-537. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (1999) A numerical method for lower bound limit analysis of 3-D structures with multi-loading systems. International Journal of Pressure Vessels and Piping, 76 (2). pp. 105-112. ISSN 0308-0161

Clarke, Joseph Andrew and Hand, Jon and Janak, Milan; Fontoynont, Marc, ed. (1999) Daylight performance : Daylight quality and control of energy consumption. In: Dayliht Performance of Buildings. Routledge. ISBN 1-873936-87-7

Cui, Dingjun and Craighead, Ian A. (1999) A new approach to assess the quality of small high-speed centrifugal fans using noise measurement. International Journal of Rotating Machinery, 5 (2). pp. 147-153. ISSN 1542-3034

Corlett, N. and Stack, Margaret and Turgoose, S. and Zhou, S; (1998) Development of a theoretical model to describe the erosion-corrosion wastage process under aqueous slurry conditions : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. Electrochemical Society Proceedings, 98 . The Electrochemical Society, USA. ISBN 1566771994

Cen, Z.Z. and Chen, Haofeng and Liu, Y.H. and Xu, B.Y. (1998) Collapse load computation of defective pipelines under multi-loading system. Metals and Materials International, 4 (3). pp. 306-310.

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) Numerical analysis of limit load and reference stress of defective pipelines under multi-loading system. International Journal of Pressure Vessels and Piping, 75 (2). pp. 105-114. ISSN 0308-0161

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) A numerical method for limit analysis of structures under multi-loading systems. Journal of Tsinghua University and Peking University : Science and Technology., 8. 28-35.

Chen, Haofeng and Cen, Z.Z. and Xu, B.Y. and Zhan, S.G. (1997) A numerical method for reference stress in the evaluation of structure integrity. International Journal of Pressure Vessels and Piping, 71 (1). pp. 47-53. ISSN 0308-0161

Clarke, Joseph Andrew; Lewis, J. Owen and Goulding, John R., eds. (1997) Predicting the impact of daylighting. In: European Directory of Sustainable and Energy Efficient Building. Routledge.

Clarke, J. A. and Hand, J. W. and Johnstone, C. M. and Kelly, N. and Strachan, P. A. (1996) Photovoltaic-integrated building facades. Renewable Energy, 8 (1-4). pp. 475-479. ISSN 0960-1481

Chen, Haofeng and Song, J. (1996) The influence of strain-rate on the residual stress fields of thick-walled cylinder. Engineering Mechanics, 13. pp. 125-131. ISSN 1802-1484

Chacón-Nava, José G. and Stott, F.H. and Stack, Margaret (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X

Clarke, Joseph Andrew; Atkin, Brian, ed. (1988) The role of energy simulation in the design and management of intelligent buildings. In: Intelligent Buildings. Unicom Applied Information Technology . Routledge. ISBN 1850916837

Clarke, Joseph Andrew (1985) Energy Simulation in Building Design. Routledge Taylor & Francis Group, Bristol. ISBN 9780852747971

Cockroft, Jeremy and Robertson, Peter (1976) Ventilation of an enclosure through a single opening. Building and Environment, 11 (1). pp. 29-35. ISSN 0360-1323

D

Dai, Yue and Yang, Jie and Chen, Haofeng (2020) Effect range of the material constraint in different strength mismatched laboratory specimens. Applied Sciences, 10 (7). 2434. ISSN 2076-3417

Dunn, Martin and Wheel, Marcus (2020) Size effect anomalies in the behaviour of loaded 3D mechanical metamaterials. Philosophical Magazine, 100 (2). pp. 139-156. ISSN 1478-6435

Dai, Yanwei and Liu, Yinghua and Qin, Fei and Chao, Yuh J. and Chen, Haofeng (2020) Constraint modified time dependent failure assessment diagram (TDFAD) based on C(t)-A2(t) theory for creep crack. International Journal of Mechanical Sciences, 165. 105193. ISSN 0020-7403

Drikakis, Dimitris and Frank, Michael and Tabor, Gavin (2019) Multiscale computational fluid dynamics. Energies, 12 (17). 3272. ISSN 1996-1073

Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo (2019) Adaptive multi-population inflationary differential evolution. Soft Computing. ISSN 1433-7479

Driggers, J. C. and Hall, E. D. and Hanson, J. and Hough, J. and Liu, J. and Smith, B. and Lockerbie, N. A. and Zhang, L., LIGO Scientific Collaboration (2019) Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO. Physical Review D, 99 (4). 042001. ISSN 1550-2368

Di Carlo, Marilena and Vasile, Massimiliano and Greco, Cristian and Epenoy, Richard; Topputo, Francesco and Sinclair, Andrew J. and Wilkins, Matthew P. and Zanetti, Renato, eds. (2019) Robust optimisation of low-thrust interplanetary transfers using evidence theory. In: 29th AAS/AIAA Space Flight Mechanics Meeting. Univelt Inc, USA, pp. 339-358. ISBN 9780877036593

Drikakis, Dimitris and Fossati, Marco and Kazakidi, Asimina and Emerson, David R. (2018) Preface to the special issue on : "29th international conference on parallel computational fluid dynamics". Computers and Fluids, 175. p. 1. ISSN 0045-7930

Di Carlo, Marilena and Vasile, Massimiliano and Dunlop, Jamie (2018) Low-thrust tour of the main belt asteroids. Advances in Space Research. ISSN 0273-1177

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng (2017) Numerical investigations on the effects of T-stress in mode I creep crack. International Journal of Computational Methods. ISSN 1793-6969 (In Press)

Dumas, Marie-Eve and Habashi, Wagdi G. and Baruzzi, Guido S. and Isola, Dario and Fossati, Marco (2017) Finite element modeling of nonequilibrium fluid-wall interaction at high-Mach regime. Journal of Aircraft, 54 (6). pp. 2330-2339. ISSN 0021-8669

Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano (2017) CAMELOT-Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox. CEAS Space Journal. ISSN 1868-2510

Di Carlo, Marilena and Vasile, Massimiliano and Kemble, Stephen (2017) Optimised GTO-GEO transfer using low-thrust propulsion. In: 31st International Symposium on Space Technology and Science (ISTS), 2017-06-03 - 2017-06-09.

Di Carlo, Marilena and Romero Martin, Juan Manuel and Ortiz Gomez, Natalia and Vasile, Massimiliano (2017) Optimised low-thrust mission to the Atira asteroids. Advances in Space Research, 59 (7). pp. 1724-1739. ISSN 0273-1177

Dumas, Marie-Eve and Habashi, Wagdi and Isola, Dario and Baruzzi, Guido and Fossati, Marco (2017) Finite element modeling of non-equilibrium fluid-wall interaction beyond the continuum regime. Journal of Aircraft. ISSN 0021-8669 (In Press)

Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano (2017) Automatic trajectory planning for low-thrust active removal mission in Low-Earth Orbit. Advances in Space Research, 59 (5). pp. 1234-1258. ISSN 0273-1177

Di Carlo, Marilena and Barbera, Daniele and Conte, Davide and Mintus, Agata and Romero Martin, Juan Manuel and Budzyn, Dorota and Teofili, Lorenzo and Grys, Szymon and Jamieson, Jonathan and Hay, Craig and Lund, Thomas and Ikeda, Nauromi and Volpe, Renato and Fleming, Douglas (2016) Human exploration of cis-lunar space via assets tele-operated from EML2 (HECATE). Acta Futura, 2016 (10). pp. 75-89.

Di Carlo, Marilena and Vasile, Massimiliano; (2016) Low-thrust tour of the main belt asteroids. In: AIAA/AAS Astrodynamics Specialist Conference, 2016. AIAA Space Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA. ISBN 9781624104459

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng; (2016) Influences of T-stress on constraint effect in mismatched modified boundary layer model for creep crack. In: ASME 2016 Pressure Vessels and Piping Conference. ASME, CAN. ISBN 9780791850398

Docherty, Stephanie Y. and Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2016) Coupling heterogeneous continuum-particle fields to simulate non-isothermal microscale gas flows. International Journal of Heat and Mass Transfer, 98. pp. 712-727. ISSN 0017-9310

Dunn, Martin A. and Wheel, Marcus A.; Altenbach, Holm and Forest, Samuel, eds. (2016) Computational analysis of the size effects displayed in beams with lattice microstructures. In: Generalized Continua as Models for Classical and Advanced Materials. Advanced Structured Materials, 42 . Springer International Publishing AG, pp. 129-143. ISBN 9783319317199

Di Carlo, Marilena and Romero Martin, Juan Manuel and Vasile, Massimiliano; (2016) CAMELOT - computational-analytical multi-fidelity low-thrust optimisation toolbox. In: 6th International Conference on Astrodynamics Tools and Techniques (ICATT). ESA, DEU.

Dempster, William and Alshaikh, Moftah; Tu, Shan-Tung and Chen, Xuedong, eds. (2015) An investigation of the two phase flow and force characteristics of a safety valve. In: 14th International Conference on Pressure Vessel Technology (ICPVT-14). Procedia Engineering, 130 . Elsevier Limited, CHN, pp. 77-86. ISBN 9781510816886

Drikakis, Dimitris and Frank, Michael (2015) Advances and challenges in computational research of micro and nano flows. Microfluidics and Nanofluidics, 19 (5). pp. 1019-1033. ISSN 1613-4982

Downes, Kerrie A. and Thomason, James L. (2015) A method to measure the influence of humidity and temperature on the interfacial adhesion in polyamide composites. Composite Interfaces, 22 (8). pp. 757-766. ISSN 0927-6440

Doman, Darrel A. and Murray, Robynne E. and Pegg, Michael J. and Gracie, Katie and Johnstone, Cameron M. and Nevalainen, Thomas (2015) Tow-tank testing of a 1/20th scale horizontal axis tidal turbine with uncertainty analysis. International Journal of Marine Energy, 11. pp. 105-119. ISSN 2214-1669

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng and Liu, Donghuan (2015) The interacting effect for collinear cracks near mismatching bimaterial interface under elastic creep. Journal of Pressure Vessel Technology. ISSN 0094-9930 (In Press)

Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo; (2015) Multi-population inflationary differential evolution algorithm with adaptive local restart. In: 2015 IEEE Congress on Evolutionary Computation, CEC 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., JPN, pp. 632-639. ISBN 9781479974924

Doutel, E. and Carneiro, J. and Oliveira, Monica and Campos, J.B.L.M. and Miranda, J.M. (2015) Fabrication of 3D mili-scale channels of hemodynamic studies. Journal of Mechanics in Medicine and Biology, 15 (1). 1550004. ISSN 0219-5194

Di Carlo, Marilena and Ortiz Gómez, Natalia and Romero Martin, Juan Manuel and Tardioli, Chiara and Gachet, Fabien and Kumar, Kartik and Vasile, Massimiliano (2015) Optimized low-thrust mission to the Atira asteroids. In: 25th AAS/AIAA Space Flight Mechanics Meeting, 2015-01-11 - 2015-01-15.

Docherty, Stephanie and Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2014) Multiscale simulation of heat transfer in a rarefied gas. International Journal of Heat and Fluid Flow, 50. pp. 114-125. ISSN 0142-727X

Di Carlo, Marilena and Vasile, Massimiliano and Minisci, Edmondo (2014) Multi-population adapative inflationary differential evolution. In: Bio-inspired Optimization Methods and their Applications, BIOMA 14, 2014-09-13 - 2014-09-13.

Dachwald, B. and Macdonald, Malcolm; Macdonald, Malcolm, ed. (2014) Gossamer roadmap technology reference study for a multiple NEO rendezvous mission. In: Advances in Solar Sailing. Springer Praxis Books: Astronautical Engineering, 1 . Springer Berlin Heidelberg, GBR, pp. 211-216. ISBN 978-3-642-34906-5

David-West, Opukuro and Nash, David and Banks, William (2014) Low velocity heavy mass impact response of singly curved composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (1). pp. 17-33. ISSN 1464-4207

Docherty, Stephanie and Nicholls, William D. and Borg, Matthew K. and Lockerby, Duncan A. and Reese, Jason M. (2014) Boundary conditions for molecular dynamics simulations of water transport through nanotubes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (1). pp. 186-195. ISSN 0954-4062

Duering, Marcel and Landgraf, Markus and Vasile, Massimiliano (2014) Station-keeping for quasi-periodic orbits. In: 65th International Astronautical Congress, 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 110. p. 1. ISSN 0308-0161

Dempster, William and Elmayyah, Wael (2013) Two phase discharge flow prediction in safety valves. International Journal of Pressure Vessels and Piping, 110. pp. 61-65. ISSN 0308-0161

Donaldson, Nathan and Parry, Thomas and Sinn, Thomas and Garcia Yarnoz, Daniel and Lowe, Christopher John and Clark, Ruaridh (2013) Ejection and recovery system for CubeSat sized ejectables on sounding rockets. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 108-109. p. 1. ISSN 0308-0161

Dhinakaran, S. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2013) Steady flow of power-law fluids in a 1:3 planar sudden expansion. Journal of Non-Newtonian Fluid Mechanics, 198. pp. 48-58. ISSN 0377-0257

Dongari, Nishanth and White, Craig and Scanlon, Thomas and Zhang, Yonghao and Reese, Jason (2013) Effects of curvature on rarefied gas flows between rotating concentric cylinders. Physics of Fluids, 25 (5). 052003. ISSN 1070-6631

Dadzie, Kokou (2013) A thermo-mechanically consistent Burnett regime continuum flow equation without Chapman-Enskog expansion. Journal of Fluid Mechanics, 716. pp. 6-11. ISSN 0022-1120

Dongari, Nishanth and Barber, Robert W. and Emerson, David and Stefanov, Stefan and Zhang, Yonghao (2013) The effect of Knudsen layers on rarefied cylindrical Couette gas flows. Microfluidics and Nanofluidics, 14 (1-2). pp. 31-43. ISSN 1613-4982

Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2013) Manoeuvring considerations for quasi-periodic trajectories. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2013) Optimal manoeuvring between quasi-periodic orbits. In: 5th International Conference on Spacecraft Formation Flying Missions and Technologies, 2013-05-29 - 2013-05-31, Hilton Munich City.

Duering, Marcel and Vasile, Massimiliano and Landgraf, Markus (2012) Uncontrolled spacecraft formations on two-dimensional invariant tori. In: 23rd International Symposium on Spaceflight Dynamics, 2012-10-29 - 2012-11-02.

Dongari, Nishanth and Agrawal, Anupam (2012) Corrigendum to "Modeling of Navier-Stokes equations for high Knudsen number gas" flows. International Journal of Heat and Mass Transfer, 55 (21-22). p. 6291. ISSN 0017-9310

Docherty, Stephanie and Nicholls, William and Borg, Matthew Karl and Reese, Jason (2012) Boundary conditions for molecular dynamics simulation of water transport through carbon nanotubes. In: 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2012-07-16 - 2012-07-18.

Dadzie, Kokou and Dongari, Nishanth (2012) Transition regime analytical solution to gas mass flow rate in a rectangular micro channel. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.

Dongari, Nishanth and White, Craig and Scanlon, Thomas and Zhang, Yonghao and Reese, Jason (2012) Rarefaction effects in gas flows over curved surfaces. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Molecular dynamics simulations of high speed rarefied gas flows. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13.

Downes, Kerrie Ann and Thomason, James (2012) The absorption of automotive coolant fluids in glass fibre reinforced polyamide 6,6 at elevated temperatures. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.

Dongari, Nishanth and Barber, Robert W. and Emerson, David and Zhang, Yonghao and Reese, Jason (2012) Velocity inversion in cylindrical Couette gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08.

Dongari, Nishanth and Agrawal, Anupam (2012) Modeling of Navier-Stokes equations for high Knudsen number gas flows. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4352-4358. ISSN 0017-9310

Dempster, William and Elmayyah, Wael (2012) Two-phase discharge flow prediction in safety valves. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.

Dadzie, Kokou and Reese, Jason (2012) Analysis of the thermomechanical inconsistency of some extended hydrodynamic models at high Knudsen number. Physical Review E, 85 (4). 041202. ISSN 1539-3755

Docherty, Stephanie and Macdonald, Malcolm (2012) Analytical sun synchronous low-thrust manoeuvres. Journal of Guidance, Control and Dynamics, 35 (2). pp. 681-686. ISSN 1533-3884

Dadzie, Kokou and Reese, Jason (2012) Spatial stochasticity and non-continuum effects in gas flows. Physics Letters A, 376 (8-9). pp. 967-972. ISSN 0375-9601

David-West, O.S. and Banks, W.M. and Pethrick, R.A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 133-148. ISSN 1464-4207

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Modeling of Knudsen layer effects in micro/nanoscale gas flows. Journal of Fluids Engineering, 133 (7). 071101. ISSN 0098-2202

Dadzie, Kokou and Reese, Jason; Levin, D.A and Wysong, I.J and Garcia, A.L and Abarbanel, H, eds. (2011) Dissipative mass flux and sound wave propagations in monatomic gases. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, pp. 655-660. ISBN 9780735408890

Dongari, Nishanth and Dadzie, Kokou and Zhang, Yonghao and Reese, Jason; Levin, D.A. and Wysong, I.J. and Garcia, A.L. and Abarbanel, H., eds. (2011) Isothermal micro channel gas flow using a hydrodynamic model with dissipative mass flux. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, USA, pp. 718-723. ISBN 9780735408890

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason; Levin, D.A and Wysong, I.J and Garcia, A.L and Abarbanel, H, eds. (2011) Behaviour of microscale gas flows based on a power-law free path distribution function. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 1333 (1st). Springer, USA, pp. 724-729. ISBN 978-0-7354-0889-0

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Molecular dynamics simulation of dense gases. In: 3rd International GASMEMS Summer School and Workshop, 2011-06-06 - 2011-06-11, Universitario di Bertinoro.

Dumazer, Guillaume and Zhang, Yonghao and Reese, Jason (2011) Molecular dynamics of argon interaction with a copper surface. In: 3rd International GASMEMS Summer School and Workshop, 2011-06-06 - 2011-06-11, Universitario di Bertinoro.

Dales, Richard and Mclaren, Andrew and Steiner, Simon (2011) Teaching International Students (TIS) : An Engineering Perspective with a Focus on Group and Project-Based Work. Engineering Subject Centre Report . Higher Education Academy, Loughborough, UK. ISBN 978-1-907632-14-3

Dongari, N. (2011) Liquid slip/stick over hydrophobic/hydrophilic surfaces and their implications in coating processes. Chemical Engineering and Processing: Process Intensification, 50 (5-6). pp. 450-453. ISSN 0255-2701

Dunlop, M. W. and Bingham, R. and Chapman, S. and Escoubet, P. and Zhang, Q-H. and Shen, C. and Shi, J-K and Trines, R. and Wicks, R. and Pu, Z-Y. and de-Keyser, J. and Schwartz, S. and Liu, Z-X (2011) Use of multi-point analysis and modelling to address cross-scale coupling in space plasmas : lessons from cluster. Planetary and Space Science, 59 (7). pp. 630-638. ISSN 0032-0633

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Molecular free path distribution in rarefied gases. Journal of Physics D: Applied Physics, 44 (12). Article 125502. ISSN 0022-3727

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason; (2011) The importance of mean free path in determining gas micro flow behaviour. In: Proceedings of the 8th International Conference on Nanochannels, Microchannels and Minichannels 2010. American Society of Mechanical Engineers, New York, pp. 481-490. ISBN 9780791854501

Dongari, Nishanth and Reese, Jason and Zhang, Yonghao (2010) Molecular dynamics studies of solid-fluid interactions in rarefied gas flows. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) Molecular dynamics studies of anomalous transport in rarefied gas flows. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10.

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) Power-law free path distribution function for thermal transpiration. In: 2nd GASMEMS Summer School & Workshop, GASMEMS 10, 2010-09-05 - 2010-09-10, Provence.

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) The importance of mean free path in determining gas flow behaviour. In: 8th International Conference on Nanochannels, Microchannels and Minichannels, 2010-08-01 - 2010-08-05.

Dadzie, S. Kokou and Reese, Jason M. (2010) A volume-based hydrodynamic approach to sound wave propagation in a monatomic gas. Physics of Fluids, 22. 016103. ISSN 1070-6631

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2009) Knudsen layer effect on thermal transpiration of rarefied gases. In: 1st GASMEMS Summer School & Workshop, GASMEMS 09, 2009-09-09 - 2009-09-11.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2009) Impact characterisation of doubly curved composite structure. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31. (Unpublished)

Donn, M.R. and Crawley, Drury B. and Hand, Jon and Marsh, A. (2009) The provenances of your simulation data. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.

Dadzie, S.K. and Reese, J.M. and McInnes, C.R. (2008) A continuum model of gas flows with localized density variations. Physica A: Statistical Mechanics and its Applications, 387 (24). pp. 6079-6094. ISSN 0378-4371

Dadzie, S. Kokou and Reese, Jason M.; (2008) The concept of mass-density in classical thermodynamics and the Boltzmann kinetic equation for dilute gases. In: Proceedings of the 26th International Symposium on Rarified Gas Dynamics. American Institute of Physics, JPN. ISBN 9780735406155

Dadzie, S.K. (2008) Conditions aux limites dans un gaz raréfié: loi de réflexion à la paroi, saut de température, vitesse de glissement, couche de Knudsen Boundary conditions in rarefied gas flows: scattering kernal, temperature jump, slip velocity, Knudsen layer problem. PhD thesis, Edilivre Universitaire.

David-West, Opukuro S. and Symington, Mark C. and Pethrick, Richard A. and Banks, William M. and Thomason, J.L. (2008) Mechanical testing of natural fibre reinforced polyester resin composites and Mode 1 fracture toughness testing of resin blocks. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.

Duraisamy, Karthikeyan and Brown, Richard (2008) Aerodynamic response of a hovering rotor to ramp change in pitch input. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01.

Dempster, W.M. and Elmayyah, W. (2008) A computational fluid dynamics evaluation of a pneumatic safety relief valve. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 2008-05-27 - 2008-05-29.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2008) An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact. Composite Structures, 83 (3). pp. 247-258. ISSN 0263-8223

David-West, O.S. and Alexander, N.V. and Nash, David and Banks, William (2008) Energy absorption and bending stiffness in CFRP laminates : the effect of 45º plies. Thin-Walled Structures, 46 (7-9). pp. 860-869. ISSN 0263-8231

Doo, G.H. and Dempster, W.M. and McNaught, J.M., DTI (Funder), EPSRC (Funder), TUVNEL (Funder), Hyprotech UK Ltd (now Aspen Technology Inc.) (Funder) (2008) Improved prediction of shell side heat transfer in horizontal evaporative shell and tube heat exchangers. Heat Transfer Engineering, 29 (12). pp. 999-1007. ISSN 0145-7632

David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE (2007) An experimental study of the response of composite pipes under impact loading. In: Proceedings of the 17th (2007) international offshore and polar engineering conference. ISOPE, California, USA, pp. 3492-3497. ISBN 1880653680

Dachwald, Bernd and Mengali, Giovanni and Quarta, Alessandro A. and Macdonald, Malcolm and McInnes, Colin R. (2007) Optical solar sail degradation modelling. In: 1st International Symposium on Solar Sailing (ISSS 2007), 2007-06-27 - 2007-06-29.

Dachwald, Bernd and Macdonald, M. and McInnes, Colin (2007) Heliocentric solar sail orbit transfers with locally optimal control laws. Journal of Spacecraft and Rockets, 44 (1). pp. 273-276. ISSN 0022-4650

David-West, O.S. and Nash, D.H. and Banks, W.M. (2007) A study of repeated impact loading on a symmetrical carbon fibre laminate. In: 16th International Conference on Composite Materials, 2011-07-20.

Deans, J. and Neale, J.D. and Dempster, W.M. and Lee, C.K. (2006) The use of effectiveness concepts in the calculations of thermal resistance of parallel plate heat sinks. Heat Transfer Engineering, 27 (5). pp. 56-67. ISSN 0145-7632

Dachwald, Bernd and Mengali, Giovanni and Quarta, Alessandro A. and Macdonald, M. (2006) Parametric model and optimal control of solar sails with optical degradation. Journal of Guidance, Control and Dynamics, 29 (5). pp. 1170-1178. ISSN 1533-3884

Dempster, W.M. and Lee, C.K. and Deans, J.; (2006) The prediction of the flow through safety relief valves. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping 2006. ASME. ISBN 0791847551

Dadzie, S. Kokou and Méolens, J. Gilbert (2005) Temperature jump and slip velocity calculations from an anisotropic scattering kernel. Physica A: Statistical Mechanics and its Applications, 358 (2-4). pp. 328-346. ISSN 0378-4371

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) Detecting the perforation threshold of curved symmetrical CFRP composite panels. In: The 12th International Conference on Composites and Nano Engineering (ICCE-12), 2005-08-01 - 2005-08-06.

Dadzie, K. and Meolans, J.G. (2005) Slip length and problem of anomalous velocity profiles. In: 4th AIAA Theoretical Fluid Mechanics Meeting, 2005-06-06 - 2005-06-09. (Unpublished)

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: The 15th International Conference on Composite Materials, ICCM 15, 2005-06-27 - 2005-07-01.

David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE , ed. (2005) The effect of surface ply stiffness on the energy absorption of curved carbon fibre composites. In: 15th International Offshore and Polar Engineering Conference, 2005-06-19 - 2005-06-24.

Dachwald, Bernd and Baturkin, Volodymyr and Coverstone, Victoria L. and Diedrich, Benjamin and Garbe, Gregory P. and Gorlich, Marianne and Leipold, Manfred and Lura, Franz and Macdonald, Malcolm and McInnes, Colin R. and Mengali, Giovanni and Quarta, Alessandro A. and Rios-Reyes, Leonel and Scheeres, Daniel J. and Sebolt, Wolfgang and Wie, Bong; (2005) Potential effects of optical solar sail degredation on trajectory design. In: Proceedings of the AAS/AIAA Astrodynamics Specialist Conference. American Institute of Aeronautics and Astronautics, pp. 2569-2592.

Dachwald, Bernd and Sebolt, Wolfgang and Macdonald, M. and McInnes, C.R. and Rios-Reyes, L. and Scheeres, Daniel J. and Gorlich, M. and Lura, F. and Diedrich, B. and Baturkin, V. and Coverstone, V.L. and Leipold, M. and Garbe, G.; (2005) Potential solar sail degradation effects on trajectory and altitude controls. In: Proceedings of the AIAA Guidance, Navigation and Control Conference. American Institute of Aeronautics and Astronautics.

David-West, O.S. and Nash, D.H. and Banks, W.M.; (2005) Damage threshold and the impact characteristics of +/- 45° and +/- 60° CFRP laminates - Poster Presentation. In: Proceedings of the 4th International Conference on Advances in Experimental Mechanics. Trans Tech Publications. ISBN 0-87849-987-3

Doyle, M.J. and Carus, D. and Pridham, M.S. (2005) A system to retrieve consumer-facing product information. British Food Journal, 107 (10). pp. 781-791. ISSN 0007-070X

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: ASC/ASTM-D30 Joint 19th Annual Technical Conference, 2004-10-17 - 2004-10-20.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates - Poster Presentation. In: The 2nd International Conference on Composites Testing and Model Identification, CompTest 04, 2004-09-21 - 2004-09-23.

Dadzie, K. and Meolans, J.G. (2004) Anisotropic scattering kernel and temperature jump at the wall. In: 24th International Symposium on Rarefied Gas Dynamics, Bari, Italy, 1900-01-01.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The study of reversible and irreversible impact loading on symmetrical and unsymmetrical CFRP composite laminates. In: The 4th International Conference on Computational and Experimental Engineering and Science, ICCES 04, 2004-07-26 - 2004-07-29.

Dadzie, S. Kokou and Méolens, J. Gilbert (2004) Anisotropic scattering kernel : generalized and modified Maxwell boundary conditions. Journal of Mathematical Physics, 45 (5). pp. 1804-1819. ISSN 0022-2488

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836

Doo, G. and McNaught, J.M. and Dempster, W.M. (2004) Shellside evaporation in a TEMA e-shell : flow pattern and transition. Applied Thermal Engineering, 24 (8-9). pp. 1195-1205. ISSN 1359-4311

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) The Influence of Oxide Film Defects on the Mechanical Strength of Al Castings. In: Proceedings of the European Metallurgy Conference, EMC 03, Hannover, Germany, 2003-01-01.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093

Doherty, N. and Scanlon, T.J. and Stickland, M.T. and Waddell, P. (2002) An experimental and numerical analysis of flow in a ShockWave power generator. In: 10th International Symposium on Flow Visualisation, 2002-08-26 - 2002-08-29.

Dempster, W.M. and Wheel, M. (2002) Engineering analysis: a pre-requisite for design. In: 2002 ASEE Annual Conference and Exposition, 2002-06-16 - 2002-06-19.

Dannecker, R.K.W. and Grant, A.D. (2002) Investigations of a building-integrated ducted wind turbine module. Wind Energy, 5 (1). pp. 53-71. ISSN 1095-4244

Dempster, W.M. and Lee, C.K. and Boyle, J.T. (2002) Teaching of thermodynamics and fluid mechanics using interactive learning methods in large classes. In: ASEE Annual Conference and Exposition: Vive L'ingenieur, 2002-06-16 - 2002-06-19.

Doyle, G.T. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2002) Dielectric non-destructive examination of ageing of adhesively bonded structures. In: UNSPECIFIED.

Deans, J. and Dempster, W.M. and Carter, L.J.; (2001) A thermal imaging procedure for landmine detection. In: Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics. Edizioni ETS.

Dempster, W.M.; Rhodes, Norman, ed. (2001) CFD modelling of two-phase mixing/separation flow. In: Computational Fluid Dynamics in Practice. Wiley-Blackwell.

Dempster, W.M. and Arebi, B. (2001) Experimental characteristcs of steam bubble growth at orifices in sub-cooled liquid. International Communications in Heat and Mass Transfer, 28 (4). pp. 467-477. ISSN 0735-1933

Dempster, W.M. and Deans, J. and Stickland, M.T.; (2001) Filling the gap: engineering design analysis within a mechanical engineering curriculum. In: Proceedings of the International Conference on Engineering Design, Computer Based Design. John Wiley & Sons. ISBN 1860583547

Dempster, W.M. and Stickland, M.T. and Vidinha, T. (2001) Liquid velocity field measurements during bubble formation and detachment at an orifice. In: UK/Japan Seminar on Multiphase Flow, 2000-02-29.

Doyle, G.T. and Pethrick, R.A. and Banks, W.M.; (2001) Novel non-destructive technique for the evaluation of adhesively bonded structures. In: Proceedings of the 24th annual meeting of the Adhesion Society: February 25 - 28, 2001, Williamsburg, VA. Adhesion Society, USA, pp. 80-82.

Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X

Dauplais, M. and Lecoq, A. and Song, J.X. and Cotton, J. and Jamin, N. and Gilquin, B. and Rowan, E.G. and Vita, C. (1997) On the convergent evolution of animal toxins - conservation of a diad of functional residues in potassium channel-blocking toxins with unrelated structures. Journal of Biological Chemistry, 272 (7). pp. 4302-4309. ISSN 1083-351X

E

Esposito, Antonio and Lappa, Marcello and Zuppardi, Gennaro and Allouis, Christophe and Apicella, Barbara and Commodo, Mario and Minutolo, Patrizia and Russo, Carmela (2020) On the formation and accumulation of solid carbon particles in high-enthalpy flows mimicking re-entry in the Titan atmosphere. Fluids, 5 (2). 93. ISSN 2311-5521

Esposito, A. and Lappa, M. (2020) Extension of the Frozen Sonic Flow Method to mixtures of polyatomic gases. AIAA Journal, 58 (1). pp. 265-277. ISSN 0001-1452

Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed (2020) Nonlinear centrifugal instabilities in curved free shear layers. In: American Institute of Aeronautics and Astronautics (AIAA) SciTech Forum, 2020-01-06 - 2020-01-10, Hyatt Regency Orlando.

Esposito, Antonio and Lappa, Marcello and Zuppardi, Gennaro and Allouis, Christophe and Apicella, Barbara and Commodo, Mario and Minutolo, Patrizia and Russo, Carmela (2019) Solid carbon produced during the simulation of re-entry in the Titan atmosphere by means of an arc-driven flow facility. In: The International Conference on Flight vehicles, Aerothermodynamics and Re-entry Missions and Engineering, 2019-09-30 - 2019-10-03.

Encarnacion, Job Immanuel and Johnstone, Cameron and Ordonez-Sanchez, Stephanie (2019) Design of a horizontal axis tidal turbine for less energetic current velocity profiles. Journal of Marine Science and Engineering, 7 (7). 197. ISSN 2077-1312

Es-Sahli, Omar and Sescu, Adrian and Afsar, Mohammed Z and Buxton, Oliver (2018) Simulating and investigating compressible flows interaction with fractal structures. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 2018-11-18 - 2018-11-21, Georgia World Congress Center.

Ellis, Robert and Allmark, Matthew and O'Doherty, Tim and Mason-Jones, Allan and Ordonez-Sanchez, Stephanie and Johannesen, Kate and Johnstone, Cameron (2018) Design process for a scale horizontal axis tidal turbine blade. In: 4th Asian Wave and Tidal Energy Conference, 2018-09-09 - 2018-09-13.

Easton, David and Perez, Marcos and Huang, Jianglin and Rahimi, Salah (2017) Effects of forming route and heat treatment on the distortion behaviour of case-hardened martensitic steel type S156. In: Heat Treat 2017, 2017-10-24 - 2017-10-26.

Elharidi, Aly M. and Tuohy, Paul G. and Teamah, Mohamed A. (2017) The energy and indoor environmental performance of Egyptian offices : parameter analysis and future policy. Energy and Buildings. ISSN 0378-7788

Elharidi, Aly M. and Tuohy, Paul G. and Teamah, Mohamed A. and Hanafy, Ahmed A. (2017) Energy and indoor environmental performance of typical Egyptian offices : survey, baseline model and uncertainties. Energy and Buildings, 135. 367–384. ISSN 0378-7788

Espinoza, Daniel and Casseau, Vincent and Scanlon, Thomas and Brown, Richard; Struchtrup, Henning and Ketsdever, Andrew, eds. (2016) An open-source hybrid CFD-DSMC solver for high speed flows. In: Proceedings of the 30th International Symposium on Rarefied Gas Dynamics. AIP Conference Proceedings, 1786 . American Institute of Physics, CAN. ISBN 9780735414488

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C. (2016) Residual stress generations in brazed tungsten dissimilar joints. IEEE Transactions on Plasma Science, 44 (9). pp. 1-6. ISSN 0093-3813

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C.; (2016) Residual stress generation in tungsten-copper brazed joint using brazing alloy. In: Fusion Engineering (SOFE), 2015 IEEE 26th Symposium on. IEEE, USA. ISBN 9781479982646

Elharidi, Aly Mohamed and Tuohy, Paul and Teamah, Mohamed and Hanafy, Ahmed; Mathur, Jyotirmay and Garg, Vishal, eds. (2015) Calibration of numerical simulations modeling of nonresidential building in hot humid climate region. In: Proceedings of BS2015. International Building Performance Simulation Association, IND, pp. 2377-2384. ISBN 9789352301188

Easton, David and Zhang, Yuxuan and Wood, James and Galloway, Alexander and Robbie, Mikael Olsson and Hardie, Christopher (2015) Brazing development and interfacial metallurgy study of tungsten and copper joints with eutectic gold copper brazing alloy. Fusion Engineering and Design, 98-99. pp. 1956-1959. ISSN 0920-3796

Elharidi, Aly Mohamed Aly Hassan and Tuohy, Paul Gerard and Teamah, Mohamed and Hanafy, Ahmed (2015) Calibration of numerical simulations modelling of nonresidential building in hot humid clmate region. In: BS2015, 14th International Conference of the IBPSA, 2015-12-07 - 2015-12-09. (In Press)

Espinoza, Daniel and Scanlon, Thomas and Brown, Richard (2015) Validation of tools to accelerate high-speed CFD simulations using OpenFOAM. In: 20th International Space Planes and Hypersonic Systems and Technologies Conference, MHYP15, 2015-07-06 - 2015-07-09.

Ellul, B and Camilleri, Duncan and Betts, J (2014) A progressive failure analysis applied to fibre-reinforced composite plates subject to out-of-plane bending. Mechanics of Composite Materials, 49 (6). pp. 605-620. ISSN 0191-5665

Elharidi, Aly Mohamed Aly Hassan and Tuohy, Paul Gerard and Teamah, M. (2013) Facing the growing problem of the electric power consumption in Egyptian residential building using building performance simulation program. In: Building Simulation Cairo 2013 Conference, 2013-06-23 - 2013-06-24.

Elmayyah, Wael and Dempster, William (2013) Prediction of two-phase flow through a safety relief valve. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227 (1). pp. 42-55. ISSN 0954-4089

Ellul, B and Camilleri, Duncan and Betts, J (2012) Progressive failure analysis applied to e-glass fibre reinforced polymers. In: XVII International Conference on Mechanics of Composite Materials, 2012-05-28 - 2012-06-01.

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Ewing, Helen and Yang, S. (2011) The effect of precursor composition and sintering additives on the formation of ß-sialon from Al, Si and Al2O3 powders. Ceramics International, 37 (5). pp. 1667-1673. ISSN 0272-8842

Ete, Arnaud and Hoffheinz, Geoff and Kelly, Nick and Ulleberg, Øystein (2008) Hydrogen energy systems : development and application of modelling tools. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25.

Essah, E.A. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C.; (2006) Airflow between houses and their roofs. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP). ISBN 0-415-41675-2

Endo, M. and Uchiyama, Kenji and Yokota, Y. and Shimada, Y. and Radice, Gianmarco and McInnes, Colin; (2005) Target proximity and obstacle avoidance for the altitude control of spacecraft using potential function guidance method. In: Proceedings of the Annual Meeting of the Northern Section of the Japan Society for Aeronautical and Space Sciences. Japan Society for Aeronautical and Space Sciences, pp. 23-26.

Earland, Simon and Nash, David and Garden, W. (2003) Guide to European pressure equipment: the complete reference source. Professional Engineering : Published in association with Roles & Associates, Bury St. Edmunds, UK. ISBN 1860583458

Ellery, Alex and Barnes, Dave and Buckland, Rodney and Welch, Chris and Garry, James and Zarnecki, John and Gebbie, Jonathan and Green, Ashley and Smith, Mark and Hall, David and McInnes, Colin and Winfield, Alan and Nehmzow, Ulrich and Ball, Andrew (2003) The UK space and planetary robotics network. JBIS, Journal of the British Interplanetary Society, 56 (9-10). pp. 328-337. ISSN 0007-084X

Edrees, H.J. and Smith, A.C. and Hendry, A. (1998) A rule-of-mixtures model for sintering of particle-reinforced ceramic-matrix composites. Journal of the European Ceramic Society, 18 (3). pp. 275-278. ISSN 0955-2219

F

Ferialdi, Hermes and Lappa, Marcello and Haughey, Christopher (2020) On the role of thermal boundary conditions in typical problems of buoyancy convection : a combined experimental-numerical analysis. International Journal of Heat and Mass Transfer, 159. 120012. ISSN 0017-9310

Fotouhi, Mohamad and Jalalvand, Meisam and Saeedifar, Milad and Xiao, Bill and Wisnom, Michael R. (2020) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis. Composite Structures, 247. 112444. ISSN 0263-8223

Fotouhi, Mohamad and Damghani, Mahdi and Leong, Mun Choong and Fotouhi, Sakineh and Jalalvand, Meisam and Wisnom, Michael R. (2020) A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests. Composite Structures, 245. 112327. ISSN 0263-8223

Frank, Michael and Drikakis, Dimitris and Charissis, Vassilis (2020) Machine-learning methods for computational science and engineering. Computation, 8 (1). 15. ISSN 1866-9964

Filippi, Gianluca and Vasile, Massimiliano and Krpelik, Daniel and Korondi, Peter Zeno and Marchi, Mariapia and Poloni, Carlo (2019) Space systems resilience optimisation under epistemic uncertainty. Acta Astronautica, 165. pp. 195-210. ISSN 0094-5765

Feng, Jinglang and Hou, Xiyun and Armellin, Roberto (2019) Survey on studies about model uncertainties in small body explorations. Progress in Aerospace Sciences, 110. 100549. ISSN 0376-0421

Filippi, Gianluca and Vasile, Massimiliano (2019) Evidence-based resilience engineering of dynamic space systems. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.

Feng, Jinglang and Santeramo, Danielle and Di Lizia, Pierluigi and Armellin, Roberto and Hou, Xiyun (2019) Stability indicator of orbital motion around asteroids with automatic domain splitting. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.

Filippi, Gianluca and Vasile, Massimiliano (2019) A multi layer evidence network model for the design process of SpaceSystems under epistemic uncertainty. In: EUROGEN 2019, 2019-09-12 - 2019-09-14.

Falchi, Alessandro and Gentile, Lorenzo and Minisci, Edmondo and Tirelli, Matteo and Perugini, Pierluigi (2019) Launcher vehicle aerothermodynamics and fairing separation altitude effects on payload temperature. In: 8th European Conference for Aeronautics and Space Sciences (EUCASS), 2019-07-01 - 2019-07-04.

Filippi, Gianluca and Vasile, Massimiliano (2019) A memetic approach to the solution of constrained min-max problems. In: 2019 IEEE Congress on Evolutionary Computation, 2019-06-10 - 2019-06-13.

Frank, Michael and Kamenicky, Robin and Drikakis, Dimitris and Thomas, Lee and Ledin, Hans and Wood, Terry (2019) Multiphase flow effects in a horizontal oil and gas separator. Energies, 12 (11). 2116. ISSN 1996-1073

Fossati, M. and Mogavero, A. and Herrera-Montojo, J. and Scoggins, J.B. and Magin, T. (2019) A kinetic BGK edge-based scheme including vibrational and electronic energy modes for high-Mach flows. Computers and Fluids, 185. pp. 1-12. ISSN 0045-7930

Fotouhi, Mohamad and Fuller, Jonathan and Longana, Marco and Jalalvand, Meisam and Wisnom, Michael R. (2019) The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215. pp. 365-376. ISSN 0263-8223

Filippi, Gianluca and Krpelik, Daniel and Korondi, Peter Zeno and Vasile, Massimiliano and Marchi, Mariapia and Poloni, Carlo (2018) Space systems resilience engineering and global system reliability optimisation under imprecision and epistemic uncertainty. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.

Filippi, Gianluca and Vasile, Massimiliano and Marchi, Mariapia and Vercesi, Paolo; (2018) Evidence-based robust optimisation of space systems with evidence network models. In: 2018 IEEE Congress on Evolutionary Computation. IEEE, BRA, pp. 1-8. ISBN 9781509060177

Filippi, Gianluca and Vasile, M. and Korondi, P. Z. and Marchi, M. and Poloni, C. (2018) Robust design optimisation of dynamical space systems. In: 8th International Systems & Concurrent Engineering for Space Applications Conference, 2018-09-26 - 2018-09-28, University of Strathclyde.

Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110. pp. 29-44. ISSN 1359-835X

Frank, Michael and Drikakis, Dimitris (2018) Thermodynamics at solid-liquid interfaces. Entropy, 20 (5). 362. ISSN 1099-4300

Frank, Michael and Drikakis, Dimitris (2018) Draining water from aircraft fuel using nitrogen enriched air. Energies, 11 (4). 908. ISSN 1996-1073

Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2018) Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46 (2). pp. 238-244. ISSN 2406-128X

Falchi, Alessandro and Minisci, Edmondo and Kubicek, Martin and Vasile, Massimiliano and Lemmens, Stijn; Vasile, Massimiliano and Minisci, Edmondo and Summerer, Leopold and Mcginty, Peter, eds. (2018) HDMR-based sensitivity analysis and uncertainty quantification of GOCE aerodynamics using DSMC. In: Stardust Final Conference. Astrophysics and Space Science Proceedings . Springer Netherlands, Cham, pp. 301-323. ISBN 978-3-319-69956-1

Frame, J.C. and Wheel, M.A. and Riches, P.E. (2018) A numerical investigation and experimental verification of size effects in loaded bovine cortical bone. International Journal for Numerical Methods in Biomedical Engineering, 34 (1). e2903. ISSN 2040-7939

Frank, Michael and Kio, Michael and Drikakis, Dimitris and Könözsy, László and Asproulis, Nikolaos (2018) Mass and stiffness effects on thermal resistance at the solid-liquid interface of nanofluidic channels. Journal of Computational and Theoretical Nanoscience, 15 (1). pp. 141-146. ISSN 1546-1955

Fidalgo, Joana and Zografos, Konstantinos and Casanellas, Laura and Lindner, Anke and Oliveira, Mónica S. N. (2017) Customised bifurcating networks for mapping polymer dynamics in shear flows. Biomicrofluidics, 11 (6). 064106. ISSN 1932-1058

Fantino, E. and Flores, R.M. and Di Carlo, M. and Di Salvo, A. and Cabot, E. (2017) Geosynchronous inclined orbits for high-latitude communications. Acta Astronautica, 140. pp. 570-582. ISSN 0094-5765

Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2017) High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology, 152. pp. 101-110. ISSN 0266-3538

Falchi, Alessandro and Renato, Viola and Minisci, Edmondo and Vasile, Massimiliano (2017) FOSTRAD : An advanced open source tool for re-entry analysis. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.

Frank, Michael and Drikakis, Dimitris (2017) Solid-like heat transfer in confined liquids. Microfluidics and Nanofluidics, 21 (9). 148. ISSN 1613-4982

Fu, Song and Johnstone, Cameron (2017) Evaluating the dynamics of tension mooring supported tidal turbines. In: 12th European Wave and Tidal Energy Conference, 2017-08-27 - 2017-09-01, University College Cork.

Fotouhi, Mohamad and Xiao, Bill and Pozegic, Thomas and Jalalvand, Meisam and Hamerton, Ian and Wisnom, Michael R. (2017) High performance piezo electric nanocomposite sensor nodes for structural health monitoring. In: 21st International Conference on Composite Materials, ICCM 2017, 2017-08-20 - 2017-08-25.

Falchi, Alessandro and Minisci, Edmondo and Vasile, Massimiliano and Rastelli, Davide and Bellini, Niccolò (2017) DSMC-based correction factor for low-fidelity hypersonic aerodynamics of re-entering objects and space debris. In: 7th European Conference for Aeronautics and Space Sciences, 2017-07-03 - 2017-07-06.

Feng, Jinglang and Hou, Xiyun (2017) Dynamics around equilibrium points of uniformly rotating asteroids. Astronomical Journal, 154 (1). ISSN 0004-6256

Flockhart, Gordon M. H. and Keating, Barbara A. and McLaren, Andrew (2017) The Engineering Academy : increasing access to engineering. In: 3rd International Enhancement in Higher Education Conference, 2017-06-06 - 2017-06-08, Radisson Blu Hotel.

Ferialdi, Hermes and Lappa, Marcello (2017) Oscillatory motion of liquid metals in non-isothermal geometries with converging or diverging walls. In: 30th Scottish Fluid Mechanics Meeting, 2017-05-19 - 2017-05-19, University of Strathclyde.

Falchi, Alessandro and Minisci, Edmondo and Vasile, Massimiliano and Kubicek, Martin (2017) Aero-thermal re-entry sensitivity analysis using DSMC and a high dimensional model representation-based approach. In: 7th European Conference on Space Debris, 2017-04-18 - 2017-04-21, ESA/ESOC.

Flett, Graeme and Kelly, Nick (2017) A disaggregated, probabilistic, high resolution method for assessment of domestic occupancy and electrical demand. Energy and Buildings, 140. pp. 171-187. ISSN 0378-7788

Feng, Jinglang and Noomen, Ron and Hou, Xiyun and Visser, Pieter and Yuan, Jianping (2017) 1:1 Ground track resonance in a uniformly rotating 4th degree and order gravitational field. Celestial Mechanics and Dynamical Astronomy, 127 (1). pp. 67-93. ISSN 0923-2958

Fossati, Marco (2016) Preface to the Special Issue on : "27th International Conference on Parallel Computational Fluid Dynamics". International Journal of Computational Fluid Dynamics, 30 (6). p. 387. ISSN 1029-0257

Fu, Song and Johnstone, Cameron and Clarke, Joe (2016) Evaluating passive structural control of tidal turbines. In: 3rd Asian Wave and Tidal Energy Conference, 2016-10-24 - 2016-10-28, Marina Bay Sands. (In Press)

Flett, Graeme and Kelly, Nick (2016) An occupant-differentiated, higher-order Markov Chain method for prediction of domestic occupancy. Energy and Buildings, 125. pp. 219-230. ISSN 0378-7788

Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czel, Gergely and Wisnom, Michael R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86. pp. 66-76. ISSN 1359-835X

Fowler, Steven and Toumpis, Athanasios and Galloway, Alexander (2016) Fatigue and bending behaviour of friction stir welded DH36 steel. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2659-2669. ISSN 0268-3768

Flett, Graeme and Kelly, Nicolas; (2015) Household-differentiated demand modelling for communities. In: 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings. International Building Performance Simulation Association, IND, pp. 1821-1828.

Frulla, G. and Gili, P. and Visone, M. and D'Oriano, V. and Lappa, M. (2015) A practical engineering approach to the design and manufacturing of a mini kW blade wind turbine : definition, optimisation and CFD analysis. Fluid Dynamics and Materials Processing, 11 (3). pp. 257-277. ISSN 1555-2578

Fleming, J.S. (2015) The energy efficiency of refrigerants : an assessment based on thermophysical properties. International Journal of Refrigeration, 58. pp. 235-242. ISSN 0140-7007

Furfaro, Roberto and Wibben, Daniel and Gaudet, Brian and Simo, Jules (2015) Terminal multiple surface sliding guidance for planetary landing : Development, tuning and optimization via reinforcement learning. Journal of the Astronautical Sciences. ISSN 0021-9142

Feng, Jinglang and Noomen, Ron and Visser, Pieter N.A.M. and Yuan, Jianping (2015) Modeling and analysis of periodic orbits around a contact binary asteroid. Astrophysics and Space Science, 357 (2). ISSN 0004-640X

Flett, Graeme Hamilton and Kelly, Nicolas (2014) Towards detailed occupancy and demand modelling of low-carbon communities. In: 1st International Conference on Zero Carbon Buildings Today and in the Future, ZCB2014,, 2014-09-11 - 2014-09-12, Birmingham City University.

Fabre, S. and Stickland, M. and Scanlon, T. and Oldroyd, A. and Kindler, D. and Quail, F. (2014) Measurement and simulation of the flow field around the FINO 3 triangular lattice meteorological mast. Journal of Wind Engineering and Industrial Aerodynamics, 130. pp. 99-107. ISSN 0167-6105

Famuyibo, A.A. and Duffy, Aidan and Strachan, Paul (2013) Achieving a holistic view of the life cycle performance of existing dwellings. Building and Environment, 70. pp. 90-101. ISSN 0360-1323

Furfaro, Roberto and Gaudet, Brian and Wibben, Daniel and Simo, Jules (2013) Development of non-linear guidance algorithms for asteroids close-proximity operations. In: AIAA Guidance, Navigation and Control Conference 2013, 2013-08-19 - 2013-08-22.

Furaro, Roberto and Simo, Jules and Gaudet, Brian and Wibben, Daniel; Broschart, Stephen and Turner, James and Howell, Kathleen and Hoots, Felix, eds. (2013) Neural-based trajectory shaping approach for terminal planetary pinpoint guidance. In: Advances in the Astronautical Sciences. Advances in the Astronautical Sciences, 150 . Univelt Inc, USA, pp. 2557-2574.

Furfaro, Roberto and Simo, Jules and Gaudet, Brian and Wibben, Daniel (2013) Neural-based trajectory shaping approach for terminal planetary pinpoint guidance. In: AAS/AIAA Astrodynamics Specialist Conference 2013, 2013-08-11 - 2013-08-15.

Frame, Jamie Campbell and Riches, Philip and Wheel, Marcus (2013) On surface effects in model heterogeneous materials and the consequences for a real material : cortical bone. In: 10th HSTAM 2013 International Congress on Mechanics, 2013-05-25 - 2013-05-27.

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2013) The micropolar behaviour of cortical bone : size and surface effects in 3 point bending. In: XXIV Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09.

Famuyibo, A.A. and Duffy, Aidan and Strachan, Paul (2012) Developing archetypes for domestic dwellings : An Irish case study. Energy and Buildings, 50. pp. 150-157. ISSN 0378-7788

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Modelling micropolar behaviour in cortical bone. Journal of Biomechanics, 45 (1). S52-S52. ISSN 0021-9290

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Haversian canal structures can be associated with size effects in cortical bone. In: Euromech 534 Colloquium: Advanced experimental approaches and inverse problems in tissue biomechanics, 2012-05-29 - 2012-05-31.

Falcão, D.S. and Oliveira, V.B. and Oliveira, Monica and Rangel, C.M. and Pinto, A.M.F.R. (2011) Modelling and simulation of micro direct methanol fuel cells. In: Advances in Hydrogen Energy Technologies: Opportunities and Challenges in a Hydrogen Economy, 4th International Seminar, 2011-11-10 - 2011-11-11.

Fabre, Sylvie and Scanlon, Thomas and Stickland, Matthew and Oldroyd, Andrew (2011) An open source CFD study of air flow over complex terrain. Wind Energy. ISSN 1095-4244 (Unpublished)

Fico, Vincenzo and Emerson, David and Reese, Jason (2011) A parallel compact-TVD method for compressible fluid dynamics employing shared and distributed-memory paradigms. Computers and Fluids, 45 (1). pp. 172-176. ISSN 0045-7930

Fallani, Matteo and Amarri, Sergio and Uusijarvi, Agneta and Adam, Rüdiger and Khanna, Sheila and Aguilera, Marga and Gil, Angel and Vieites, Jose M and Norin, Elisabeth and Young, David and Scott, Jane A and Doré, Joël and Edwards, Christine A, the INFABIO team (2011) Determinants of the human infant intestinal microbiota after the introduction of first complementary foods in infant samples from five European centres. Microbiology, 157 (Pt 5). pp. 1385-1392.

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2011) The micropolar properties of bone. In: 1st International Symposium on Numerical Simulation in Orthopaedic Biomechanics (SimOrtho), 2011-08-26 - 2011-08-27.

Fletcher, Timothy M. and Brown, Richard (2010) Helicopter tail rotor thrust and main rotor wake coupling in crosswind flight. Journal of Aircraft, 47 (6). pp. 2136-2148. ISSN 0021-8669

Fletcher, Timothy M. and Brown, Richard (2010) Simulation of wind turbine wake interaction using the vorticity transport model. Wind Energy, 13 (7). pp. 587-602. ISSN 1095-4244

Fidalgo, C. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Imai, Y and Yamaguchi, T. (2010) Measuring the cell-free layer in circular microchannels. In: 6th World Congress of Biomechanics, WCB2010, 2010-08-01 - 2010-08-06.

Fico, Vincenzo and Emerson, David and Reese, Jason (2010) A new parallel compact TVD scheme for compressible flows employing domain decomposition. In: 22nd International Conference on Parallel Computational Fluid Dynamics, Parallel CFD 2010, 2010-05-17 - 2010-05-21.

Fico, Vincenzo and Emerson, David and Reese, Jason (2010) A high order compact scheme for hypersonic aerothermodynamics. In: 48th AIAA Aerospace Sciences Meeting, 2010-01-04 - 2010-01-07.

Fletcher, Timothy M. and Brown, R.E. (2010) Interaction of an Eulerian flue gas plume with wind turbines. In: 29th ASME Wind Energy Symposium, 2010-01-04 - 2010-01-07.

Frontini, Francesco and Kuhn, Tilman E. and Heikel, Sebastian and Strachan, Paul and Kokogiannakis, Georgios (2009) Implementation of a new bi-directional solar modelling method for complex facades within the ESP-r building simulation program. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30.

Fletcher, Timothy M. and Duraisamy, Karthikeyan and Brown, Richard (2009) Sensitivity of tail rotor noise to helicopter configuration in forward flight. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29.

Fletcher, Timothy M. and Brown, Richard and Kim, Da Hye and Kwon, Oh Joon (2009) Predicting wind turbine blade loads using vorticity transport and RANS methodologies. In: European Wind Energy Conference and Exhibition, EWEC 2009, 2009-03-16 - 2009-03-19.

Ferguson, A. and Kelly, N.J. and Weber, Andreas and Griffith, Brent (2009) Modelling residential-scale combustion-based cogeneration in building simulation. Journal of Building Performance Simulation, 2 (1). pp. 1-14. ISSN 1940-1493

Fletcher, Timothy M. and Brown, R.E. (2009) Simulating wind turbine interactions using the vorticity transport equations. In: 28th ASME Wind Energy Symposium, 2009-01-05 - 2009-01-08.

Fletcher, Timothy M. and Duraisamy, Karthikeyan and Brown, Richard (2008) Aeroacoustic analysis of main rotor-tail rotor interaction. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19.

Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion-cogeneration. In: The Canadian Building Simulation Conference, eSim 2008, 2008-05-20 - 2008-05-22.

Fletcher, Timothy M. and Brown, R.E. (2008) Main rotor-tail rotor intraction and its implications for helicopter directional control. Journal of the American Helicopter Society, 53 (2). pp. 125-138. ISSN 0002-8711

Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion cogeneration model. In: eSim 2008: 5th IBPSA - Canada Conference, 2008-05-21 - 2008-05-22.

Flannigan, A. and Offord, S.J.J. and Orr, S.W. and Wheel, Marcus (2007) Mechanical testing of wood-glass composite mast sections. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (2). pp. 45-52. ISSN 1464-4207

Ferguson, A. and Kelly, N.J. (2006) Modelling building-integrated stirling CHP systems. In: eSim2006: Canadian Building Simulation Conference, 2006-05-03 - 2006-05-05.

Fernández, J and Blanco, E and Parrondo, J and Stickland, M. T. and Scanlon, T. J. (2004) Performance of a centrifugal pump running in inverse mode. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). pp. 265-271. ISSN 0957-6509

Fleming, J.S. and Yan, Y. (2003) The prediction of vapour-liquid equilibrium behaviour of HFC blend-oil mixtures from commonly available data. International Journal of Refrigeration, 26 (3). pp. 266-274. ISSN 0140-7007

Fleming, J.S. (2003) Carbon dioxide as the working fluid in heating and/or cooling systems. Bulletin of the International Institute of Refrigeration, 83 (4). pp. 7-15. ISSN 0020-6970

Fleming, J.S. (2003) The requirements of HFC refrigerants in a competitive environment. Proceedings of the Institute of Refrigeration, 99.

Freund, Sebastian and Kummert, Michael (2003) New TRNSYS types to simulate air-to-air energy recovery. In: TRNSYS Users day and Training, 2003-03-24 - 2003-03-26.

Fernandez, J. and Blanco, E. and Fernandez-Oro, J. and Stickland, M.T. and Scanlon, T.J. (2002) Estudio numerico de las condiciones de estabilidad de estructuras bidimensionales bajo carga aerodinamica. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.

Fernandez, J. and Blanco, E. and Fernandez-Oro, J. and Stickland, M.T. and Scanlon, T.J. (2002) Diseno de una bomba centrifuga : analisis numerico y experimental. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13.

Fernandez, J. and Parrondo, J. and Scanlon, T.J. and Stickland, M.T.; (2002) A numerical and experimental flow analysis in a centrifugal pump with impeller-volute interaction. In: Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 0-08-044114-9

Fernandez, J. and Blanco, E. and Parrondo, J. and Stickland, M.T. and Scanlon, T.J. (2001) Ironwork of Teixois-Taramundi (Asturias) Spain. In: International Symposium on History of Machines and Mechanisms, HMM 2000, 2000-05-11 - 2000-05-13.

Fernandez, J. and Scanlon, T.J. and Stickland, M.T. (2001) Mapping the velocity field in a pump impeller using high speed digital video, image derotation and particle image velocimetry. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14.

Fleming, J.S. and Yan, Y. and Gutierrez-Vega, M. and Yanagisawa, T.; (2001) The economics of compressor modelling. In: Compressors and their systems. IMECHE Conference Transactions . Professional Engineering Publishing, Wiltshire, UK, pp. 359-370. ISBN 186058330X

G

Gaurier, Benoît and Ordonez-Sanchez, Stephanie and Facq, Jean-Valéry and Germain, Grégory and Johnstone, Cameron and Martinez, Rodrigo and Salvatore, Francesco and Santic, Ivan and Davey, Thomas and Old, Chris and Sellar, Brian (2020) MaRINET2 tidal energy round robin tests : performance comparison of a horizontal axis turbine subjected to combined wave and current conditions. Journal of Marine Science and Engineering, 8 (6). 463. ISSN 2077-1312

Greenlee, George and Afsar, Mohammed and Muhel, Rohella (2020) Investigating incipient separation for an aerofoil at an arbitrary orientation subjected to on oncoming gust. In: 33rd Scottish Fluid Mechanics Meeting, 2020-05-28 - 2020-05-28, Heriot Watt University.

Greco, Cristian and Campagnola, Stefano and Vasile, Massimiliano (2020) Robust space trajectory design using belief stochastic optimal control. In: American Institute of Aeronautics and Astronautics (AIAA) SciTech Forum, 2020-01-06 - 2020-01-10, Hyatt Regency Orlando.

Gong, Baichun and Li, Shuang and Zheng, Lili and Feng, Jinglang (2020) Analytic initial relative orbit solution for angles-only space rendezvous using hybrid dynamics method. CMES - Computer Modeling in Engineering and Sciences, 122 (1). pp. 221-234. ISSN 1526-1506

Greco, Cristian and Di Carlo, Marilena and Vasile, Massimiliano and Epenoy, Richard (2019) Direct multiple shooting transcription with polynomial algebra for optimal control problems under uncertainty. Acta Astronautica. ISSN 0094-5765

Gentile, Lorenzo and Greco, Cristian and Minisci, Edmondo and Bartz-Beielstein, Thomas and Vasile, Massimiliano (2019) An optimization approach for designing optimal tracking campaigns for low-resources deep-space missions. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.

Graça Marto, Simão and Vasile, Massimiliano and Epenoy, Richard (2019) Multi-objective robust trajectory optimisation under epistemic uncertainty and imprecision. In: 70th International Astronautical Congress, 2019-10-21 - 2019-10-25.

Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2019) Sound generation due to the interaction of turbulence with surfaces embedded in transversely sheared flow. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2159). 20190076. ISSN 1471-2962

Gong, Jian-Guo and Cheng, Gong and Xuan, Fu-Zhen and Chen, Haofeng (2019) Notch effect on structural strength of components at elevated temperature under creep, fatigue and creep-fatigue loading conditions : phenomenon and mechanism. Journal of Pressure Vessel Technology, 141 (5). 050801. ISSN 0094-9930

Gentile, Lorenzo and Greco, Cristian and Minisci, Edmondo and Bartz-Beielstein, Thomas and Vasile, Massimiliano; (2019) Structured-chromosome GA optimisation for satellite tracking. In: GECCO '19 Proceedings of the Genetic and Evolutionary Computation Conference Companion. ACM, Prague, Czech Republic, pp. 1955-1963. ISBN 978145067486

Gaurier, B. and Ordonez-Sanchez, S. and Facq, J.-V. and Germain, G. and Johnstone, C. and Martinez, R. and Santic, I. and Salvatore, F. (2019) First round of MaRINET 2 Tidal Energy Round Robin Tests : combined wave and current tests. In: 13th European Wave and Tidal Energy Conference, 2019-09-01 - 2019-09-06.

Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2019) Rapid distortion theory on transversely sheared mean flows of arbitrary cross section. Journal of Fluid Mechanics. ISSN 0022-1120 (In Press)

Greco, Cristian and Gentile, Lorenzo and Vasile, Massimiliano and Minisci, Edmondo and Bartz-Beielstein, Thomas (2019) Robust particle filter for space objects tracking under severe uncertainty. In: 2019 AAS/AIAA Astrodynamics Specialist Conference, 2019-08-11 - 2019-08-15.

Gu, Qingqing and Zhu, Lianhua and Zhang, Yonghao and Liu, Haihu (2019) Pore-scale study of counter-current imbibition in strongly water-wet fractured porous media using lattice Boltzmann method. Physics of Fluids, 31 (8). 086602. ISSN 1070-6631

García, David and Tcherniak, Dmitri (2019) An experimental study on the data-driven structural health monitoring of large wind turbine blades using a single accelerometer and actuator. Mechanical Systems and Signal Processing, 127. pp. 102-119. ISSN 0888-3270

Garcia, Cristobal and Trendafilova, Irina (2019) Triboelectric sensor as a dual system for impact monitoring and prediction of the damage in composite structures. Nano Energy, 60. pp. 527-535. ISSN 2211-2855

Greco, Cristian and Gentile, Lorenzo and Filippi, Gianluca and Minisci, Edmondo and Vasile, Massimiliano and Bartz-Beielstein, Thomas; (2019) Autonomous generation of observation schedules for tracking satellites with structured-chromosome GA optimisation. In: 2019 IEEE Congress on Evolutionary Computation. IEEE, NZL, pp. 497-505. ISBN 9781728121536

Garcia, Cristobal and Trendafilova, Irina (2019) Real-time diagnosis of small energy impacts using a triboelectric nanosensor. Sensors and Actuators A: Physical, 291. pp. 196-203. ISSN 0924-4247

Giugliano, Dario and Cho, Nak-Kyun and Chen, Haofeng and Gentile, Lorenzo (2019) Cyclic plasticity and creep-cyclic plasticity behaviours of the SiC/Ti-6242 particulate reinforced titanium matrix composites under thermo-mechanical loadings. Composite Structures. ISSN 0263-8223 (In Press)

Garcia, Cristobal and Trendafilova, Irina and Sanchez de Rio, Jose (2019) Detection and measurement of impacts in composite structures using a self-powered triboelectric sensor. Nano Energy, 56. pp. 443-453. ISSN 2211-2855

Guo, Su-Juan and Wang, Run-Zi and Chen, Haofeng and Xuan, Fu-Zhen (2019) A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint. International Journal of Mechanical Science, 150. pp. 66-78. ISSN 0020-7403

Gutiérrez, Bárbara Arizmendi and Minisci, Edmondo and Chisholm, Greig; Andrés-Pérez, E. and González, L. and Periaux, J. and Gauger, N. and Quagliarella, D. and Giannakoglou, K., eds. (2019) CFD based design optimization of a cabinet nitrogen generator. In: Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems. Computational Methods in Applied Sciences . Springer, Cham, Switzerland, pp. 247-260. ISBN 978-3-319-89889-6

Germanou, Lefki and Ho, Minh Tuan and Zhang, Yonghao and Wu, Lei (2018) Intrinsic and apparent gas permeability of heterogeneous and anisotropic ultra-tight porous media. Journal of Natural Gas Science and Engineering, 60. pp. 271-283. ISSN 1875-5100

Giugliano, Dario and Barbera, Daniele and Chen, Haofeng and Cho, Nak-Kyun and Liu, Yinghua (2018) Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538

Garcia, Cristobal and Trendafilova, Irina (2018) A self-powered triboelectric velocity sensor for impact detection in composite structures. MATEC Web of Conferences, 211. 21004. ISSN 2261-236X

Greco, Cristian and Di Carlo, Marilena and Vasile, Massimiliano and Epenoy, Richard (2018) An intrusive polynomial algebra multiple shooting approach to the solution of optimal control problems. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05, Messe Bremen Findorffstraße.

Garcia, D. and Tcherniak, D. and Branner, K. (2018) Virtual prototyping of an actuator-based structural health monitoring system of wind turbine blades. In: 28th International Conference on Noise and Vibration Engineering, ISMA 2018, Including the 5th International Conference on Uncertainty in Structural Dynamics, USD 2018, 2018-09-17 - 2018-09-19.

Griffiths, Alexander D. and Herrnsdorf, Johannes and Lowe, Christopher and Macdonald, Malcolm and Henderson, Robert and Strain, Michael J. and Dawson, Martin D. (2018) Temporal encoding to reject background signals in a low complexity, photon counting communication link. Materials, 11 (9). 1671. ISSN 1996-1944

Garcia, Cristobal and Trendafilova, Irina and Guzman de Villoria, Roberto and Sanchez del Rio, Jose (2018) Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis. Nano Energy, 50. pp. 401-409. ISSN 2211-2855

Gu, Qingqing and Liu, Haihu and Zhang, Yonghao (2018) Lattice Boltzmann simulation of immiscible two-phase displacement in two-dimensional Berea sandstone. Applied Sciences, 8 (9). 1497. ISSN 2076-3417

Garwood, Tom Lloyd and Hughes, Ben Richard and O'Connor, Dominic and Calautit, John K. and Oates, Michael R. and Hodgson, Thomas (2018) A framework for producing gbXML building geometry from Point Clouds for accurate and efficient Building Energy Modelling. Applied Energy, 224. pp. 527-537. ISSN 0306-2619

Garcia, Cristobal and Trendafilova, Irina and Zucchelli, Andrea (2018) The effect of polycaprolactone nanofibers on the dynamic and impact behavior of glass fibre reinforced. Journal of Composites Science, 2 (3). 43. ISSN 2504-477X

Gorash, Yevgen and Bickley, Alan and Gozalo, Francisco; (2018) Application of the CEL approach to consider FSI for the assessment of leak tightness for elastomeric seals. In: ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers (ASME), CZE. ISBN 9780791851654

Gentile, Lorenzo and Giugliano, Dario and Cestino, Enrico and Frulla, Giacomo and Minisci, Edmondo (2018) Optimisation based analysis of the effect of particle spatial distribution on the elastic behaviour of PRMMC. In: 6th European Conference on Computational Mechanics and 7th European Conference on Computational Fluid Dynamics 2018, 2018-06-11 - 2018-06-15.

Greco, Cristian and Di Carlo, Marilena and Walker, Lewis and Vasile, Massimiliano (2018) Analysis of NEOs reachability with nano-satallites and low-thrust propulsion. In: 4S Symposium 2018 - Small Satellites Systems and Services, 2018-05-28 - 2018-06-01, Hilton Sorrento Palace.

Gorash, Y. and Bickley, A. and Gozalo, F. (2018) Assessment of leak tightness for swellable elastomeric seals considering fluid-structure interaction with the CEL approach. In: 24th International Conference on Fluid Sealing, 2018-03-07 - 2018-03-08.

Garcia, Cristobal and Trendafilova, Irina and Guzman de Viloria, Roberto and Sánchez del Rio, Jose (2018) Triboelectric nanogenerator as self-powered impact sensor. MATEC Web of Conferences, 148. 14005. ISSN 2261-236X

Garcia, Cristobal and Trendafilova, Irina and Zucchelli, Andrea and Contreras, Justin (2018) The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites. MATEC Web of Conferences, 148. 14001. ISSN 2261-236X

Garcia, David and Trendafilova, Irina (2018) Study of Singular Spectrum Analysis as a data-driven technique for damage diagnosis. Comparison between the time or frequency domain. In: International Conference on Engineering Vibration 2017 (ICoEV 2017), 2017-09-04 - 2017-09-07.

Garwood, Tom Lloyd and Hughes, Ben Richard and Oates, Michael R. and O'Connor, Dominic and Hughes, Ruby (2018) A review of energy simulation tools for the manufacturing sector. Renewable and Sustainable Energy Reviews, 81 (Part 1). pp. 895-911. ISSN 1364-0321

Griffiths, Alexander D. and Herrnsdorf, Johannes and Lowe, Christopher and Macdonald, Malcolm and Henderson, Robert and Strain, Michael J. and Dawson, Martin D. (2018) Poissonian communications : free space optical data transfer at the few-photon level. Working paper. arXiv.org, Ithaca, NY.

Garwood, Tom Lloyd and Hughes, Ben Richard and O'Connor, Dominic and Calautit, John K and Oates, Michael R and Hodgson, Thomas (2017) Geometry extraction for high resolution building energy modelling applications from Point Cloud data : a case study of a factory facility. Energy Procedia, 142. pp. 1805-1810. ISSN 1876-6102

Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058

Gong, Jian-Guo and Niu, Tian-Ye and Chen, Haofeng and Xuan, Fu-Zhen (2017) Shakedown analysis of pressure pipeline with an oblique nozzle at elevated temperatures using the Linear Matching Method. International Journal of Pressure Vessels and Piping. pp. 1-26. ISSN 0308-0161 (In Press)

Ghani, Saud and Bialy, Esmail M. and Bakochristou, Foteini and Gamaledin, Seifelislam Mahmoud Ahmad and Rashwan, Mohammed Mohammed and Hughes, Ben (2017) Thermal comfort investigation of an outdoor air-conditioned area in a hot and arid environment. Science and Technology for the Built Environment, 23 (7). pp. 1113-1131. ISSN 2374-474X

Gonzalez Manich, Clara and Gonzalez-Longo, Cristina and Monari, Filippo (2017) La fábrica de piedra durante los siglos XVII y XVIII en Escocia : estudio preliminar. In: X Congreso Nacional y II Congreso Internacional Hispanoamericano de Historia de la Construcción, 2017-10-03 - 2017-10-07, Escuela Técnica Superior de Arquitectura.

Gorash, Yevgen and Comlekci, Tugrul and Hamilton, Robert (2017) CAE-based application for identification and verification of hyperelastic parameters. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (7). pp. 611-626. ISSN 1464-4207

Greco, Cristian and Vasile, Massimiliano; (2017) Novel piecewise trajectory shaping in Hill's canonical variables. In: 68th International Astronautical Congress (IAC) 2017. International Astronautical Federation (IAF), Paris. ISBN 9781510855373

Garcia, Cristobal and Wilson, Jodi and Trendafilova, Irina and Yang, Liu (2017) Vibratory behaviour of glass fibre reinforced polymer (GFRP) interleaved with nylon nanofibers. Composite Structures, 176. pp. 923-932. ISSN 0263-8223

Goldstein, M. E. and Leib, S. J. and Afsar, M. Z. (2017) Generalized rapid-distortion theory on transversely sheared mean flows with physically realizable upstream boundary conditions : application to trailing edge problem. Journal of Fluid Mechanics, 824. pp. 477-512. ISSN 0022-1120

Gorash, Y. and Bickley, A. and Gozalo, F.; Lion, Alexander and Johlitz, Michael, eds. (2017) Improvement of leak tightness for swellable elastomeric seals through the shape optimization. In: Constitutive Models for Rubber X. CRC Press/Balkema, DEU, pp. 453-458. ISBN 9781138030015

Gorash, Yevgen and Zhou, Xingguo and Comlekci, Tugrul and Mackenzie, Donald and Bayyouk, Jacob; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Consideration of weld distortion throughout the identification of fatigue curve parameters using mean stress correction. In: FATIGUE 2017. Engineering Integrity Society, GBR, pp. 366-377. ISBN 9780954436834

Gorash, Yevgen and MacKenzie, Donald (2017) On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour. Open Engineering, 7 (1). pp. 126-140. ISSN 2391-5439

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2017) Investigation of fatigue assessments accuracy for beam weldments considering material data input and FE-mode type. Journal of Physics: Conference Series, 843. 012025. ISSN 1742-6596

Ganilova, Olga and Low, Jia (2017) Application of smart honeycomb structures for automotive passive safety. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070

Grey, Stuart and Marchand, Richard and Ziebart, Marek and Omar, Roghaiya (2017) Sunlight illumination models for spacecraft surface charging. IEEE Transactions on Plasma Science. ISSN 0093-3813

García, David and Trendafilova, Irina and Inman, Daniel J.; (2017) Delamination detection and growth assessment in composite laminated beams through data-driven vibration structural health monitoring. In: 14th International Conference on Engineering Structural Integrity Assessment (ESIA14). EMAS Publishing, Warrington.

Gradinscak, Tomislav and Lappa, Marcello (2017) Oscillatory compressible thermal convection in vertical and inclined differentially heated cavities. In: 30th Scottish Fluid Mechanics Meeting, 2017-05-19 - 2017-05-19, University of Strathclyde.

Ganilova, O. A. and Awaludin, A. and Dong, R. (2017) Hybrid energy harvesting based on cymbal and wagon wheel inspiration. Journal of Intelligent Material Systems and Structures. pp. 1-22. ISSN 1530-8138

Grey, Stuart (2017) Deformation of space debris and subsequent changes in orbit during eclipse due to solar and earth radiation fluxes. In: 7th European Conference on Space Debris, 2017-04-18 - 2017-04-21, ESA/ESOC.

Gao, Song and Habashi, Wagdi G. and Fossati, Marco and Isola, Dario and Baruzzi, Guido S.; (2017) Finite-element formulation of a Jacobian-free solver for supersonic viscous flows on hybrid grids. In: 55th AIAA Aerospace Sciences Meeting. AIAA SciTech Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA, pp. 1-28. ISBN 9781624104473

Gebreslassie, Mulualem G. and Sanchez, Stephanie O. and Tabor, Gavin R. and Belmont, Michael R. and Bruce, Tom and Payne, Gregory and Moon, Ian (2016) Experimental and CFD analysis of the wake characteristics of tidal turbines. International Journal of Marine Energy, 16. pp. 209-219. ISSN 2214-1669

Gorash, Yevgen and Bickley, Alan and Gozalo, Francisco (2016) Design optimisation of swellable elastomeric seals using advanced material modelling and FEM simulations. In: IOM3 - Innovations in Rubber Design, 2016-12-07 - 2016-12-08, The Royal Aeronautical Society, 4 Hamilton Place.

Gong, Yue-Jiao and Li, Jing-Jing and Zhou, Yicong and Li, Yun and Chung, Henry Shu-Hung and Shi, Yu-Hui and Zhang, Jun (2016) Genetic learning particle swarm optimization. IEEE Transactions on Cybernetics, 46 (10). pp. 2277-2290. 7271066. ISSN 2168-2275

Gao, Song and Habashi, Wagdi G. and Isola, Dario and Baruzzi, Guido S. and Fossati, Marco (2016) A Jacobian-free edged-based Galerkin formulation for compressible flows. Computers and Fluids. ISSN 0045-7930

Garcia, D. and Liśkiewicz, G. (2016) Stable or not stable? Recognizing surge based on the pressure signal. Transactions of the Institute of Fluid-Flow Machinery, 2016 (133). pp. 55-68. ISSN 0079-3205

Garner, Robert J. and Toso, Federico and Maddock, Christie Alisa (2016) Comparison of the emissions of current expendable launch vehicles and future spaceplanes. In: 67th International Astronautical Congress, 2016-09-26 - 2016-09-30, Expo Guadalajara.

Goodarzi, M. Saeed and Hosseini-Toudeshky, Hossein and Jalalvand, Meisam; (2016) Shear-mode viscoelastic damage formulation interface element. In: Advances in Fracture and Damage Mechanics XV. Key Engineering Materials, 713 . Trans Tech Publications Ltd, ESP, pp. 167-170. ISBN 9783038357162

Gracie-Orr, Katie and Nevalainen, Thomas M. and Johnstone, Cameron M. and Murray, Robynne E. and Doman, Darrel A. and Pegg, Michael J. (2016) Development and initial application of a blade design methodology for overspeed power-regulated tidal turbines. International Journal of Marine Energy, 15. pp. 140-155. ISSN 2214-1669

Giugliano, Dario and Barbera, Daniele and Chen, Haofeng (2016) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids. EJMSOL_3346. ISSN 0997-7538

Gorash, Yevgen and Dempster, William and Nicholls, William D. and Hamilton, Robert and Anwar, Ali A. (2016) Study of mechanical aspects of leak tightness in a pressure relief valve using advanced FE-analysis. Journal of Loss Prevention in the Process Industries, 43. pp. 61-74. ISSN 0950-4230

Gislason, M. K. and Foster, E. and Main, D. and Fusiek, G. and Niewczas, P. and Bransby-Zachary, M. and Nash, D. H. (2016) Mechanical testing and modelling of the Universal 2 implant. Medical Engineering and Physics, 38 (6). pp. 511-517. ISSN 1350-4533

Grey, Stuart and Marchand, Richard (2016) Modelling spacecraft illumination and the effect of specular, diffuse and multiple reflection on photoelectron emission. In: 14th Spacecraft Charging Technology Conference, 2016-04-04 - 2016-04-08, ESA/ESTEC.

Giugliano, Dario and Chen, Haofeng (2016) Micromechanical modelling on cyclic plastic behaviour of unidirectional fiber reinforced aluminium matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538

Garcia, David and Trendafilova, Irina and Inman, Daniel (2016) A study on the vibration-based self-monitoring capabilities of nano-enriched composite laminated beams. Smart Materials and Structures, 25 (4). p. 1. 045011. ISSN 0964-1726

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2016) Influence of material data input on accuracy of fatigue assessments for beam weldments. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). 90857. ISSN 1617-7061 (In Press)

Giourntas, Lampros Gerasimos and Brownlie, Frazer and Karafyllias, Georgios and Hodgkiess, Trevor and Galloway, Alexander (2016) Effect of corrosion on abrasive wear in a range of materials. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.

Gaurier, B. and Germain, G. and Facq, J.V. and Johnstone, C.M. and Grant, A.D. and Day, A.H. and Nixon, E. and de Felice, F. and Constanzo, M. (2015) Tidal energy "Round Robin" tests - comparisons between towing tank and circulating tank results. International Journal of Marine Energy, 12. pp. 87-109. ISSN 2214-1669

Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058

Gorash, Yevgen and Dempster, William and Nicholls, William D. and Hamilton, Robert (2015) Fluid pressure penetration for advanced FEA of metal-to-metal seals. Proceedings in Applied Mathematics and Mechanics, PAMM, 15 (1). pp. 197-198. ISSN 1617-7061

Garcia, D. and Palazzetti, R. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2015) Vibration-based delamination diagnosis and modelling for composite laminate plates. Composite Structures, 130. pp. 155-162. ISSN 0263-8223

Garcia, David and Stickland, Matthew and Liśkiewicz, Grzegorz Pawel (2015) Dynamical system analysis of unstable flow phenomena in centrifugal blower. Open Engineering, 5 (1). pp. 332-342. ISSN 2391-5439

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Enhanced approach of assessing the corrosive wear of engineering materials under impingement. Wear, 338-339. pp. 155-163. ISSN 0043-1648

Garcia Cava, David and Tcherniak, Dmitri and Trendafilova, Irina; (2015) Damage assessment for wind turbine blades based on a multivariate statistical approach. In: Journal of Physics Conference Series. Journal of Physics: Conference Series, 628 . Institute of Physics Publishing, BEL.

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. Wear, 332-333. pp. 1051-1058. ISSN 0043-1648

Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE analysis. In: 12th International Conference on Computational Methods & Experiments in Surface & Contact Mechanicsc including Tribology, 2015-04-21 - 2015-04-23, TRYP València Oceanic Hotel.

Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert; de Hosson, J.Th.M. and Hadfield, M. and Brebbia, C.A., eds. (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE-analysis. In: Surface Effects and Contact Mechanics including Tribology XII. WIT Transactions on Engineering Sciences, 91 . WIT Press, ESP, pp. 247-258. ISBN 978-1-84564-950-0

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. In: 20th International Conference on Wear of Materials, 2015-04-12 - 2015-04-16, The Sheraton Centre.

Garcia Yarnoz, Daniel and Scheeres, Daniel J. and McInnes, Colin (2015) On the a and g families of orbits in the Hill problem with solar radiation pressure and their application to asteroids. Celestial Mechanics and Dynamical Astronomy, 121 (4). pp. 365-384. ISSN 0923-2958

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2015) Alternating orbiter strategy for asteroid exploration. Journal of Guidance, Control and Dynamics, 38 (2). pp. 280-291. ISSN 1533-3884

Garcia, David and Trendafilova, Irina (2014) A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment : application for delamination detection in composite materials. Journal of Sound and Vibration, 333 (25). pp. 7036-7050. ISSN 0022-460X

Gorash, Yevgen and Mackenzie, Donald (2014) Cyclic yield strength in definition of design limits for fatigue and creep. Proceedings in Applied Mathematics and Mechanics, PAMM, 14 (1). pp. 365-366. ISSN 1617-7061

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Sousa, P.C. and Ribeiro, Vera M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2014) Viscoelastic instabilities in microscale flows. Experimental Thermal and Fluid Science. pp. 128-139. ISSN 0894-1777

Garcia Yarnoz, Daniel and McInnes, Colin (2014) Coupled orbit-attitude dynamics of a captured asteroid during swing-bys. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Garcia, David and Trendafilova, Irina (2014) Singular spectrum analysis for identifying structural nonlinearity using free-decay responses : Application detection and diagnosis in composite laminates. In: 26th International Conference on Noise and Vibration Engineering, 2014-09-15 - 2014-09-17.

Garcia Yarnoz, Daniel and Scheeres, Daniel J. and McInnes, Colin (2014) On the a and g families of symmetric periodic orbits in the photo-gravitational hill problem and their application to asteroids. In: AIAA/AAS Astrodynamics Specialist Conference 2014, 2014-08-04 - 2014-08-07, California.

Grey, Stuart and Ziebart, Marek; (2014) Developments in high fidelity surface force models and their relative effects on orbit prediction. In: AIAA/AAS Astrodynamics Specialist Conference. AIAA SPACE Forum . AIAA, USA. ISBN 9781624103087

Garcia, David and Trendafilova, Irina and Al-Bugharbee, Hussein Razzaq Sabah (2014) Vibration-based health monitoring approach for composite structures using multivatiate statistical analysis. In: 14th European Workshop on Structura Health Monitoring, 2014-07-08 - 2014-07-11.

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2014) Passive sorting of asteroid material using solar radiation pressure. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1223-1235. ISSN 1533-3884

Gilroy, D. and Young, A. M. and Phillips, A. and Wheel, M. and Riches, P. E. (2014) Characterisation and Validation of Sawbones™ Artificial Composite Femur material. In: 7th World Congress of Biomechanics, 2014-07-06 - 2014-07-11, John B. Hynes Veterans Memorial Convention Center.

Gong, Shengping and Simo, Jules (2014) Orbital motions of a solar sail around the L2 Earth-Moon libration point. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1349-1356. ISSN 1533-3884

Gill, Simon and Svehla, Katalin and Hand, Jon and Kim, Jae Min and Samuel, Aizaz and Clarke, Joseph and Kockar, Ivana and Ault, Graham (2014) Competing objectives in domestic demand side management: : learning from the Northern Isles New Energy Solutions projects. In: CIRED Workshop 2014, 2014-06-11 - 2014-06-12, Ergife Palace Hotel.

Gorash, Yevgen and Mackenzie, Donald (2014) Safe structural design for fatigue and creep using cyclic yield strength. In: ECCC - Creep and Fracture Conference 2014, 2014-05-05 - 2014-05-07.

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Wayman, Alastair and Eckersley, Steven and Watson, Ian A. (2014) A space-based laser system for the deflection and manipulation of near Earth asteroids. In: International High Power Laser Ablation and Beamed Energy Propulsion Symposium, HPLA/BEP, 2014-04-21 - 2014-06-25.

Gislason, Magnus and Coupaud, Sylvie and Sasagawa, Keisuke and Tanabe, Yuji and Purcell, Mariel and Allan, David B and Tanner, K. Elizabeth (2014) Prediction of risk of fracture in the tibia due to altered bone mineral density distribution resulting from disuse : a finite element study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (2). p. 165. ISSN 0954-4119

Gray, Thomas and Camilleri, Duncan and McPherson, Norman (2014) Control of welding distortion in thin plate fabrication : Design support exploiting computational simulation. Welding and Other Joining Technologies . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857090478

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2014) Optimised cross-slot microdevices for homogeneous extension. RSC Advances, 4 (15). pp. 7799-7804. ISSN 2046-2069

Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue endurance of welded joints. Proceedings in Applied Mathematics and Mechanics, PAMM, 13 (1). pp. 73-74. ISSN 1617-7061

Gorash, Yevgen and Chen, Haofeng (2013) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). Materials Research Innovations, 17 (5). pp. 337-343.

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue strength of welded joints using the linear matching method. International Journal of Fatigue, 55. pp. 112-125. ISSN 0142-1123

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Applications of solar radiation pressure dominated highly non-Keplerian trajectories around minor bodies. In: 64th International Astronautical Congress 2013, 2013-09-23 - 2013-09-27.

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin; (2013) Opportunities for asteroid retrieval missions. In: Asteroids. Springer Berlin Heidelberg, London, 479-505, Chapter 21. ISBN 978-3-642-39243-6

Garcia, David and Trendafilova, Irina (2013) Multivariate statistical analysis for damage and delamination in composite structures. In: 11th International Conference on Vibration Problems, 2013-09-09 - 2013-09-12, Instituto Superior Tecnico.

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A (2013) Experimental analysis of laser ablated plumes for asteroid deflection and exploitation. Acta Astronautica, 90 (1). pp. 85-97. ISSN 0094-5765

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Easily retrievable objects among the NEO population. Celestial Mechanics and Dynamical Astronomy, 116 (4). pp. 367-388. ISSN 0923-2958

Gorash, Yevgen and Chen, Haofeng; (2013) Linear matching method for parametric studies of weldments creep-fatigue endurance. In: ASME 2013 Pressure Vessels and Piping Conference. ASME, FRA. ISBN 978-0-7918-5570-6

Galindo-Rosales, Francisco J and Alves, M.A. and Oliveira, Monica (2013) Optimisation of microfluidic devices for extensional rheometry. In: VI Brazilian Conference on Rheology, 2013-07-10 - 2013-07-12.

Gibbings, Alison and Vasile, Massimiliano and Watson, Ian A. (2013) Deflecting and exploring asteroids with lasers. In: University of Strathclyde Research Day 2013, 2013-06-07 - 2013-06-07.

Gauci, Thomas and Sant, Tonio and Muscat, Martin and Camilleri, Duncan and Mollicone, Pierluigi (2013) An investigation of different offshore wind turbine jacket support foundation models designed for central Mediterranean deep waters. Wind Engineering, 37 (3). pp. 229-242. ISSN 0309-524X

Groh, R.M.J. and Weaver, Paul M. and White, S. and Raju, Gangadharan and Wu, Zhangming (2013) A 2D equivalent single-layer fomulation for the effect of transverse shear on laminated plates with curvilinear fibres. Composite Structures, 100. pp. 464-478. ISSN 0263-8223

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2013) Experimental characterization of the thrust induced by laser ablation on an asteroid. In: IAA Planetary Defense Conference, 2013-04-15 - 2013-05-19.

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2013) Optimized cross-slot microdevices for extensional rheometry. In: 8th Annual European Rheology Conference, AERC 2013, 2013-04-02 - 2013-04-05.

Galloway, Alexander and McGhie, W and McPherson, Norman (2013) Thin plate buckling mitigation and reduction challenges for naval ships. Journal of Marine Engineering & Technology, 12 (2). pp. 3-10. ISSN 1476-1548

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Gibbings, Alison and Vetrisano, Massimo (2013) Exploring and deflecting asteroids with laser ablation. In: SET for Britain 2013, 2013-03-18 - 2013-03-18.

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Passive sorting of asteroid material using solar radiation pressure. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14.

Galindo-Rosales, Francisco J and Alves, M.A. and Oliveira, Monica (2013) Microdevices for extensional rheometry of low viscosity elastic liquids : a review. Microfluidics and Nanofluidics, 14 (1-2). pp. 1-19. ISSN 1613-4982

Gilroy, Daniel and Riches, Philip and Wheel, Marcus (2013) Finite element analysis of a sliding hip screw. In: XXIV Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09.

Gorman, Daniel and Horacek, Jaromir and Mulholland, Anthony and Gorman, Marie N. (2013) Analysis and interpretation of compressible fluid interaction upon the vibration of a circular membrane. Acta Technica, 58 (4). pp. 443-461. ISSN 0001-7043

Gislason, Magnus Kjartan and Stansfield, Benedict and Bransby-Zachary, Marc and Hems, Tim and Nash, David (2012) Load transfer through the radiocarpal joint and the effects of partial wrist arthrodesis on carpal bone behaviour : a finite element study. Journal of Hand Surgery (European Volume), 37 (9). pp. 871-878. ISSN 1753-1934

Gislason, Magnus Kjartan and Nash, David; Ebrahimi, Farzad, ed. (2012) Finite element modelling of a multi bone joint : The human wrist. In: Finite element analysis. InTech, Croatia, pp. 77-98. ISBN 9789535107699

Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27.

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic T-channels for extensional rheology. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14.

Gauci, Thomas and Sant, Tonio and Muscat, Martin and Mollicone, Pierluigi and Camilleri, Duncan (2012) An investigation of different offshore wind turbine jacket support foundation models designed for Central Mediterranean Deep Waters. In: OWEMES 2012, Offshore Wind & Other Marine Renewable Energies in Mediterranean & European Seas Conference, 2012-09-05 - 2012-09-07, Hortensia Hall, Conference Centre, “Fiera di Roma”.

Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07. (Unpublished)

Guechaichia, Abdelhamid and Trendafilova, Irina (2012) A simple frequency-based delamination detection and localization method without baseline model. Journal of Physics Conference Series, 382 (1). 012033. ISSN 1742-6588

Galindo-Rosales, Francisco J and Aarts, D and Alves, M.A. and Oliveira, Monica (2012) A novel use for the cross-slot microfluidic device in extensional micro-rheometry. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) Assessing the flow of low viscosity Boger-like fluids through microfluidic analogues of a porous medium. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic devices for application in extensional rheology. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10.

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2012) Potential of laser-induced ablation for future space applications. Space Policy, 28 (3). pp. 149-153. ISSN 0265-9646

Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207

Greenshields, Christopher and Reese, Jason (2012) Rarefied hypersonic flow simulations using the Navier-Stokes equations with non-equilibrium boundary conditions. Progress in Aerospace Sciences, 52 (1). pp. 80-87. ISSN 0376-0421

Gentles, Fiona and Thomason, James (2012) Investigation of interfacial strength between polyethylene terephthalate fibre and maleic anhydride modified polypropylene. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28.

Gibbings, Alison and Vasile, Massimiliano (2012) Smart Cloud : A novel method for the deflection and mitigation of asteroids. In: Astrobiology Science Conference 2012, 2012-04-16 - 2012-04-20.

Gibbings, Alison and Vasile, Massimiliano and Watson, Ian A. and Hopkins, John-Mark and Burns, David (2012) Laser ablation for the effective deflection, exploration and exploitation of asteroids. In: Astrobiology Science Conference 2012, 2012-04-16 - 2012-04-20.

Gibbings, Alison (2012) Experimental analysis of laser ablation for asteroid deflection and exploitation. In: SET for Britain 2012, 2012-03-12 - 2012-03-12.

Gong, Shengping and Baoyin, Hexi and Li, Junfeng and Simo, Jules (2012) A new solar sail orbit. Science China - Technological Sciences, 55 (3). pp. 848-855. ISSN 1674-7321

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. and Oliveira, Monica and Alves, M.A. (2012) Microfluidic systems for the analysis of the viscoelastic fluid flow phenomena in porous media : A review. Microfluidics and Nanofluidics, 12 (1-4). pp. 485-498. ISSN 1613-4982

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian A. (2012) LASER BEES : A concept for asteroid deflection and hazard mitigation. The Planetary Society, Pasadena, USA.

Gauci, Thomas and Muscat, Martin and Sant, Tonio and Mollicone, Pierluigi and Camilleri, Duncan (2011) Ultimate state design of a deep water offshore wind turbine support structure for the central Mediterranean region. In: European Offshore Wind Conference 2011, 2011-11-29 - 2011-12-01.

Gibbings, Alison and Komninou, Eirini and Vasile, Massimiliano (2011) Investigation and modelling of large scale cratering events : Lessons learnt from experimental analysis. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Gibbings, Alison and Vasile, Massimiliano (2011) A smart cloud approach to asteroid deflection. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07.

Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857092908

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Numerical analysis of Microfluidic Systems Analogue of Porous Media (MSAPM) for Newtonian and low viscous Boger fluid flows. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A.; (2011) Numerical analysis of microfluidic systems analogue of porous media (MSAPM) for Newtonian and low viscous Boger fluids. In: Rheology Trends. UNSPECIFIED. ISBN 978-972-8669-50-8

Gislason, Magnus Kjartan and Stansfield, Benedict and Nash, David (2011) Computational modelling of the wrist. In: Annual UK Hand & Wrist Network Meeting, 2011-09-01 - 2011-09-02.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Oliveira, Monica and Alves, M.A. and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. (2011) Microchannels analogues for the study of viscoelastic fluid flows through porous media. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24.

Guechaichia, Abdelhamid and Trendafilova, Irina (2011) A simple method for enhanced vibration-based structural health monitoring. Journal of Physics Conference Series, 305 (1). 012073. ISSN 1742-6588

Gibbings, Alison and Hopkins, John-Mark and Burns, David and Vasile, Massimiliano and Watson, Ian A. (2011) Exploring and exploiting asteroids with laser ablation. In: UK Space Conference 2011, 2011-07-04 - 2011-07-05.

Gislason, Magnus Kjartan and Nash, David (2011) Total wrist arthroplasty : A finite element study. In: 23rd Congress of the International Society of Biomechanics, 2011-07-03 - 2011-07-07.

Gibbings, Alison and Hopkins, John-Mark and Burns, David and Vasile, Massimiliano (2011) On testing laser ablation processes for asteroid deflection. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.

Gibbings, Alison and Vasile, Massimiliano (2011) Impact cratering experiments into highly porous bodies. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12.

Gentles, Fiona Lamont and Thomason, James (2011) Determination of the fibre content of natural fibre composites through moisture absorption. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12.

Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207

Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2011) Helium additions to MIG shielding gas - an economic option? Welding and Cutting, 10 (2). pp. 118-121. ISSN 1612-3433

Gibbings, Alison and Zuiani, Federico and Vasile, Massimiliano (2010) Orbit determination and control for the European Student Moon Orbiter. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.

Gibbings, Alison and Zuiani, Federico and Vasile, Massimiliano and Novak, Daniel (2010) Optimal design of low-energy transfers to highly eccentric frozen orbits around the moon. In: 61st International Astronautical Congress 2010, IAC 2010, 2010-09-27 - 2010-10-01.

Gibbings, Alison and Komninou, Eirini and Vasile, Massimiliano (2010) Kinematic impactors : Improved modelling of asteroid deflection from an experimental and numerical approach. In: European Planetary Science Congress, 2010-09-19 - 2010-09-24.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Effects of partial wrist arthrodesis on loading at the radiocarpal joints. In: 17th Congress of the European Society of Biomechanics, 2010-07-05 - 2010-07-08. (Unpublished)

Gentles, F. and Anderson, J. and Thomason, J.L. (2010) Characterisation of the transverse thermoelastic properties of natural fibres used in composites. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Finite element model creation and stability considerations of complex biological articulation : the human wrist joint. Medical Physics, 32 (5). pp. 523-531. ISSN 0094-2405

Gibbings, Alison and Novak, Daniel and Zuiani, Federico and Vasile, Massimiliano (2010) Navigation analysis and manoeuvres design for the European Student Moon Orbiter. In: Small Satellites Systems and Services, The 4S Symposium, 2010-05-31 - 2010-06-04.

Greenshields, C.J. and Weller, H.G. and Gasparini, F. and Reese, J.M. (2010) Implementation of semi-discrete, non-staggered central schemes in a collated, polyhedral, finite volume framework, for high-speed viscous flows. International Journal of Numerical Methods for Heat and Fluid Flow, 63. pp. 1-21. ISSN 0961-5539

Gibbings, Alison and Vasile, Massimiliano and Zuiani, Federico and Novak, Daniel and Rizzi, Francesco and Martinez, Cesar (2010) European Student Moon Orbiter (ESMO) - Mission Overview : Presentation. In: ESA/ESTEC Systems Requirement Review Workshop, 2010-03-22 - 2010-03-26.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) The importance of the radiotriquetral ligament for proximal row stability in the wrist : a finite element study. In: 9th International Symposium in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 2010-02-24 - 2010-02-27.

Gislason, Magnus K. and Nash, D.H. and Nicol, A.C. and Kanellopoulos, A. and Bransby-Zachary, M. and Hems, T. and Condon, B. and Stansfield, B. (2009) A three-dimensional finite element model of maximal grip loading in the human wrist. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223 (7). pp. 849-861. ISSN 0954-4119

Ghauri, Sabeeta and Hand, Jon and Johnstone, Cameron and Kim, Jae Min and Kokogiannakis, Georgios and Tuohy, Paul Gerard and Woo, K-H. (2009) Adoption of dynamic simulation for an energy performance rating tool for Korean residential buildings : EDEM-SAMSUNG. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2009) Loading on the Scapho-Trapezium-Trapezoid joint during gripping. In: 22nd Congress of the International Society of Biomechanics, 2009-07-05 - 2009-07-09.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. and Hems, Tim and Bransby-Zachary, Marc (2009) Ulnar variance and load transfer in the forearm during maximal grip: a finite element study. In: Combined Scientific Meeting of the British and American Societies of Surgery of the Hand, 2009-04-30 - 2009-05-02.

Gislason, Magnus Kjartan and Nash, David (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. In: 16th Congress of the European Society of Biomechanics, 2008-07-06 - 2008-07-09.

Gislason, Magnus K. and Nash, David H. and Stansfield, Benedict (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. Journal of Biomechanics, 41 (Supple). S147-S147. ISSN 0021-9290

Gorman, Daniel G. and Trendafilova, Irina and Mulholland, Anthony J. and Horáček, Jaromir (2008) Vibration analysis of a circular plate in interaction with an acoustic cavity leading to extraction of structural modal parameters. Thin-Walled Structures, 46 (7-9). pp. 878-886. ISSN 0263-8231

Grant, Andrew and Johnstone, Cameron and Kelly, Nick (2008) Urban wind energy conversion: the potential of ducted turbines. Renewable Energy, 33 (6). pp. 1157-1163. ISSN 0960-1481

Gislason, M.K. and Nash, D.H. (2008) Using finite element method in preoperative planning for wrist surgery. In: Engineering the Upper Limb: Patient Specific Surgical Planning and Implementation, 2008-04-23 - 2008-04-24.

Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2008) Mars and moon exploration passing through the european precision landing GNC test facility. Acta Astronautica, 63 (1-4). pp. 74-90. ISSN 0094-5765

Gorman, D.G. and Trendafilova, I. and Mulholland, A.J. and Horáček, J. (2007) Analytical modelling and extraction of the modal behaviour of a cantilever beam in fluid interaction. Journal of Sound and Vibration, 308 (1-2). pp. 231-245. ISSN 0022-460X

Grabowska, J. and Palacz, M. and Krawczuk, M. and Ostachowicz, W. and Trendafilova, Irina and Manoach, E. and Cartmell, M. (2007) Wavelet analysis for damage identification in composite structures. Key Engineering Materials, 347. pp. 253-258. ISSN 1013-9826

Greenshields, Christopher and Reese, Jason M. (2007) The structure of shock waves as a test of Brenner's modifications to the Navier-Stokes equations. Journal of Fluid Mechanics, 580. pp. 407-429. ISSN 0022-1120

Greenshields, C.J. and Reese, J.M.; (2007) The structure of hypersonic shock waves using Navier-Stokes equations modified to include mass diffusion. In: 2nd European Conference on Aero-Space Sciences (EUCASS). Von Karman Institute, BEL.

Gorman, Daniel G. and Horáček, J. (2007) Analysis of the free vibration of a coupled plate/fluid interacting system and interpretation using sub-system modal energy. Engineering Structures, 29 (5). pp. 754-762. ISSN 0141-0296

Gray, T.G.F. and Wood, J. (2007) Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 433-446. ISSN 0309-3247

Gabrowska, Joanna and Palacz, Magdalena and Krawczuk, Marek and Ostachovicz, Wieslaw and Trendafilova, Irina and Manoach, Emil and Cartmell, Matthew P. (2007) Wavelet analysis for damage indentification in composite materials. Key Engineering Materials, 347. pp. 253-261. ISSN 1013-9826

Gislason, M.K. and Kanellopoulos, A. and Barnes, R. and Nash, D.H. (2007) The effect of anatomical variations on the load transfer characteristics of the wrist during gripping. In: XI Congress of the Federation of the European Societies for Surgery of the Hand, 2006-06-28 - 2006-06-30.

Gislason, M.K. and Nash, D.H. and BARNES, R.; Lennon, A.B. and Prendergrast, P.J. and Lennon, A.B. and Prendergrast, P. J., eds. (2007) On the creation of a subject specific finite element model of the wrist joint. In: Proceedings of the 2007 Summer Workshop of the European Society of Biomechanics. Dublin: Trinity Centre for Bioengineering, pp. 122-124. ISBN 095485831X

Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2007) Testing GNC technologies for planetary landing on Mars and Moon analogues. In: 2nd International Workshop on Exploring Mars and its Earth Analogues, 2007-06-01.

Gray, T.G.F. and Camilleri, D. and Mollicone, P. (2006) Experimental validation of computational methods for welding distortion prediction. In: 22nd Symposium on Experimental Mechanics of Solids, 2006-10-18 - 2006-10-21.

Galbraith, G.H. and Baker, P.H. and Bailly, D. and McLean, R.C.; (2006) An X-ray apparatus for advanced construction related moisture research. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. Engineering and Physical Sciences Research Council.

Galloway, A. and McPherson, Norman; (2006) Nitrogen retention/enrichment of 316LN austenitic steel welds. In: FabTech International Conference. Society of Manufacturing Engineers, pp. 281-283.

Galloway, A. and McPherson, Norman (2006) The effect of shielding gas composition on weld metal nitrogen retention in 316LN austenitic stainless steels. Welding and Cutting, 5 (4). pp. 225-230. ISSN 1612-3433

Galloway, Alexander and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic stainless steel welds. In: FabTech International Conference, 2011-06-20. (Unpublished)

Gorman, D. and Trendafilova, I. and Mulholland, A. and Horáček, J. (2006) Vibration of a coupled plate/fluid interacting system and its implication for modal analysis and vibration health monitoring. Applied Mechanics and Materials, 5-6. pp. 323-330. ISSN 1660-9336

Gray, T.G.F. (2006) Integration of case study technical investigations in honours/masters engineering courses. International Journal of Mechanical Engineering Education, 34 (4). pp. 315-329. ISSN 0306-4190

Gu, X.J. and Emerson, David and Barber, Robert W. and Zhang, Yonghao; (2006) Towards numerical modelling of