Browse by Journal or other publication

2023

Johansson, Wanja and Li, Jun and Lin, Leteng (2023) Module-based simulation model for prediction of convective and condensational heat recovery in a centrifugal wet scrubber. Applied Thermal Engineering, 219 (Part A). 119454. ISSN 1359-4311

2022

Figari, Massimo and Theotokatos, Gerasimos and Coraddu, Andrea and Stoumpos, Sokratis and Mondella, Teresa (2022) Parametric investigation and optimal selection of the hybrid turbocharger system for a large marine four-stroke dual-fuel engine. Applied Thermal Engineering, 208. 117991. ISSN 1359-4311

Lu, Daoyi and Theotokatos, Gerasimos and Zhang, Jundong and Zeng, Hong and Cui, Keying (2022) Parametric investigation of a large marine two-stroke diesel engine equipped with exhaust gas recirculation and turbocharger cut out systems. Applied Thermal Engineering, 200. 117654. ISSN 1359-4311

2019

Li, Jian and Hossain, Md. Moinul and Sun, Jun and Liu, Yudong and Zhang, Biao and Tachtatzis, Christos and Xu, Chuanlong (2019) Simultaneous measurement of flame temperature and absorption coefficient through LMBC-NNLS and plenoptic imaging techniques. Applied Thermal Engineering, 154. pp. 711-725. ISSN 1359-4311

Yuan, Han and Sun, Pengyuan and Zhang, Ji and Sun, Kunyuan and Mei, Ning and Zhou, Peilin (2019) Theoretical and experimental investigation of an absorption refrigeration and pre-desalination system for marine engine exhaust gas heat recovery. Applied Thermal Engineering, 150. pp. 224-236. ISSN 1359-4311

2018

Allison, John and Bell, Keith and Clarke, Joe and Cowie, Andrew and Elsayed, Ahmed and Flett, Graeme and Oluleye, Gbemi and Hawkes, Adam and Hawker, Graeme and Kelly, Nick and Manuela Marinho de Castro, Maria and Sharpe, Tim and Shea, Andy and Strachan, Paul and Tuohy, Paul (2018) Assessing domestic heat storage requirements for energy flexibility over varying timescales. Applied Thermal Engineering, 136. pp. 602-616. ISSN 1359-4311

Zhang, Jian and Yang, Lui and Dempster, William and YU, Xinhai and Jia, Jiuhomg and Tu, Shan-Tung (2018) Prediction of blowdown of a pressure relief valve using response surface methodology and CFD techniques. Applied Thermal Engineering, 133. pp. 713-726. ISSN 1359-4311

Hu, Nao and Yang, Jianguo and Zhou, Peilin (2018) Sensitivity analysis of the dynamic response of an electronic fuel injector regarding fuel properties and operating conditions. Applied Thermal Engineering, 129. pp. 709-724. ISSN 1359-4311

2016

Allison, John (2016) Robust multi-objective control of hybrid renewable microgeneration systems with energy storage. Applied Thermal Engineering, 114. pp. 1498-1506. ISSN 1359-4311

2015

Yuan, Han and Zhou, Peilin and Mei, Ning (2015) Performance analysis of a solar-assisted OTEC cycle for power generation and fishery cold storage refrigeration. Applied Thermal Engineering, 90. pp. 809-819. ISSN 1359-4311

2014

Kelly, Nicolas J. and Tuohy, Paul G. and Hawkes, Adam D. (2014) Performance assessment of tariff-based air source heat pump load shifting in a UK detached dwelling featuring phase change-enhanced buffering. Applied Thermal Engineering, 71 (2). pp. 809-820. ISSN 1359-4311

2012

Aranjo, Brendan Savio and Hughes, Ben Richard and Chaudry, Hassam Nasarullah (2012) Performance investigation of ground cooling for the airbus A380 in the United Arab Emirates. Applied Thermal Engineering, 36 (1). pp. 87-95. ISSN 1359-4311

2007

Loutzenhiser, P.G. and Manz, H. and Felsmann, C. and Strachan, P.A. and Maxwell, G.M. (2007) An empirical validation of modelling solar gain through a glazing unit with external and internal shading screens. Applied Thermal Engineering, 27 (2-3). pp. 528-538. ISSN 1359-4311

2004

Doo, G. and McNaught, J.M. and Dempster, W.M. (2004) Shellside evaporation in a TEMA e-shell : flow pattern and transition. Applied Thermal Engineering, 24 (8-9). pp. 1195-1205. ISSN 1359-4311

2003

Chow, T.T. and Hand, J. and Strachan, P.A. (2003) Building-integrated photovoltaic and thermal applications in a subtropical hotel building. Applied Thermal Engineering, 23 (16). pp. 2035-2049. ISSN 1359-4311

1997

Isdale, J.D. and Mercier, P. and Grillot, J.M. and Mulholland, A.J. and Gomatam, J. (1997) Integrated modelling of process heat transfer with combustion and fouling. Applied Thermal Engineering, 17 (8). pp. 751-762. ISSN 1359-4311