Calculation of outer crack stress intensity factors for nozzle junctions in cylindrical pressure vessels using FCPAS

Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2021) Calculation of outer crack stress intensity factors for nozzle junctions in cylindrical pressure vessels using FCPAS. In: Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. Volume 2: Computer Technology and Bolted Joints; Design and Analysis, 2 . ASME, New York, NY.. ISBN 9780791885321 (

[thumbnail of Bozkurt-etal-ASMEPVP-2021-Calculation-of-outer-crack-stress-intensity-factors-for-nozzle-junctions-in-cylindrical-pressure-vessels-using-FCPAS]
Text. Filename: Bozkurt_etal_ASMEPVP_2021_Calculation_of_outer_crack_stress_intensity_factors_for_nozzle_junctions_in_cylindrical_pressure_vessels_using_FCPAS.pdf
Accepted Author Manuscript

Download (853kB)| Preview


Pressure vessels can be subjected to various external local forces and moments acting in combination with main internal pressure. As a result of the stress system set up, and in the presence of attachment welds, surface cracks can occur on the interior and exterior walls. If these cracks cannot be detected at an early stage, there is a real potential for the vessel to rupture with obvious dangerous consequences. The behavior of fractured or geometric discontinuity structures can be investigated with linear elastic fracture mechanics (LEFM) parameters. The stress intensity factor (SIF) is the leading one, and with correct calculations, it can produce the stress intensity in the crack tip region. In cylinder-cylinder intersections subject to local loads, the maximum stress distribution occurs in and around these opening areas and failure in the system usually occurs in this region. Using this approach, the present study develops three-dimensional mixed mode stress intensity factor solutions on for external cracks on nozzle joints in cylindrical pressure vessels nozzle junctions for a variety of geometrical configurations. This was undertaken using a finite element approach and employing a bespoke software tool and solver, FCPAS - Fracture and Crack Propagation Analysis System — to create the finite element mesh and propagation characteristics. From this, a parameter study examining the influence of the crack shape, size and position was carried out with a fixed pressure vessel nozzle cylinder intersection geometry configuration and the appropriate stress intensity factors identified and reported. The FCPAS tool is shown to be an effective approach to modelling and characterizing cracks in pressure vessel nozzles.