Picture of a satellite in orbit.

Open Access research that solves space system engineering problems...

Strathprints makes available scholarly Open Access content by scholars in the Departments of Mechanical & Aerospace Engineering, Electronic & Electrical Engineering, and Design, Manufacturing & Engineering Management -- all active in the areas of space systems engineering, space mechatronics, aerospace and astronautical engineering. This spans a wide variety of topics such as nano-satellites, self-assembling spacecraft, robotics, flightpath mechanics, orbital dynamics, trajectory design and optimization, autonomous navigation and planning -- and with almost all research outputs openly available through Strathprints.

Explore the Open Access research of the Mechanical & Aerospace Engineering, Electronic & Electrical Engineering, and Design, Manufacturing & Engineering Management. Or explore all of Strathclyde's Open Access research...

Browse by Journal or other publication

Group by: Publication Date | Item type | No Grouping
Jump to: 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2011 | 2010 | 2009 | 2008 | 2007 | 2005 | 2002 | 2001
Number of items: 36.

2020

Kucharek, Mariusz and MacRae, William and Yang, Liu (2020) Investigation of the effects of silica aerogel particles on thermal and mechanical properties of epoxy composites. Composites Part A: Applied Science and Manufacturing, 139. 106108. ISSN 1359-835X

2019

Thomason, J. L. (2019) Glass fibre sizing : a review. Composites Part A: Applied Science and Manufacturing, 127. 105619. ISSN 1359-835X

Thomason, James L. and Nagel, Ulf and Yang, Liu and Bryce, David (2019) A study of the thermal degradation of glass fibre sizings at composite processing temperatures. Composites Part A: Applied Science and Manufacturing, 121. pp. 56-63. ISSN 1359-835X

Rev, Tamas and Jalalvand, Meisam and Fuller, Jonathan and Wisnom, Michael R. and Czél, Gergely (2019) A simple and robust approach for visual overload indication - UD thin-ply hybrid composite sensors. Composites Part A: Applied Science and Manufacturing, 121. pp. 376-385. ISSN 1359-835X

2018

Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110. pp. 29-44. ISSN 1359-835X

Minty, Ross F. and Yang, Liu and Thomason, James L. (2018) The influence of hardener-to-epoxy ratio on the interfacial strength in glass fibre reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2018) Hierarchical pseudo-ductile hybrid composites combining continuous and highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 105. pp. 40-56. ISSN 1359-835X

Czél, Gergely and Rev, Tamas and Jalalvand, Meisam and Fotouhi, Mohamad and Longana, Marco L. and Nixon-Pearson, Oliver J. and Wisnom, Michael R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104. pp. 151-164. ISSN 1359-835X

2017

Bashir, S.T. and Yang, L. and Anderson, R. and Tang, P.L. and Liggat, J.J. and Thomason, J.L. (2017) A simple chemical approach to regenerating the strength of thermally damaged glass fibre. Composites Part A: Applied Science and Manufacturing, 102. pp. 76-87. ISSN 1359-835X

Pender, K. and Yang, L. (2017) Investigation of the potential for catalysed thermal recycling in glass fibre reinforced polymer composites by using metal oxides. Composites Part A: Applied Science and Manufacturing, 100. pp. 285-293. ISSN 1359-835X

2016

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites. Composites Part A: Applied Science and Manufacturing, 91. pp. 436-447. ISSN 1359-835X

Wisnom, M.R. and Czél, G. and Swolfs, Y. and Jalalvand, M. and Gorbatikh, L. and Verpoest, I. (2016) Hybrid effects in thin ply carbon/glass unidirectional laminates : accurate experimental determination and prediction. Composites Part A: Applied Science and Manufacturing, 88. pp. 131-139. ISSN 1359-835X

Thomason, J. L. and Nagel, U. and Yang, L. and Sáez, E. (2016) Regenerating the strength of thermally recycled glass fibres using hot sodium hydroxide. Composites Part A: Applied Science and Manufacturing, 87. pp. 220-227. ISSN 1359-835X

Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czel, Gergely and Wisnom, Michael R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86. pp. 66-76. ISSN 1359-835X

2015

Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Parametric study of failure mechanisms and optimal configurations of pseudo-ductile thin-ply UD hybrid composites. Composites Part A: Applied Science and Manufacturing, 74. pp. 123-131. ISSN 1359-835X

Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2015) Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 73. pp. 35-44. ISSN 1359-835X

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2015) Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies. Composites Part A: Applied Science and Manufacturing, 72. pp. 75-84. ISSN 1359-835X

Yang, L. and Saez, E.R. and Nagel, U. and Thomason, J. (2015) Can thermally degraded glass fibre be regenerated for closed-loop recycling of thermosetting composites? Composites Part A: Applied Science and Manufacturing, 72. pp. 167-174. ISSN 1359-835X

Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Damage analysis of pseudo-ductile thin-ply UD hybrid composites - a new analytical method. Composites Part A: Applied Science and Manufacturing, 69. pp. 83-93. ISSN 1359-835X

2014

Thomason, J.L. and Yang, L. and Meier, R. (2014) The properties of glass fibres after conditioning at composite recycling temperatures. Composites Part A: Applied Science and Manufacturing, 61. pp. 201-208. ISSN 1359-835X

2011

Yang, Liu and Thomason, James and Zhu, W.Z. (2011) The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene. Composites Part A: Applied Science and Manufacturing, 42 (10). pp. 1293-1300. ISSN 1359-835X

2010

Yang, Liu and Thomason, J.L. (2010) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods. Composites Part A: Applied Science and Manufacturing, 41 (9). pp. 1077-1083. ISSN 1359-835X

Thomason, J.L. and Ali, J.Z. and Anderson, J. (2010) The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 41 (7). pp. 820-826. ISSN 1359-835X

2009

Thomason, J.L. and Ali, J.Z. (2009) The dimensional stability of glass-fibre reinforced Polyamide 66 during hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 40 (5). pp. 625-634. ISSN 1359-835X

Symington, Mark C. and Banks, W.M. and Opukuro, David West and Pethrick, R.A. (2009) Tensile testing of cellulose based natural fibers for structural composite applications. Composites Part A: Applied Science and Manufacturing, 43 (9). pp. 1083-1108. ISSN 1359-835X

Thomason, J.L. (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 114-124. ISSN 1359-835X

2008

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced Polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (11). pp. 1732-1738. ISSN 1359-835X

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (10). pp. 1618-1624. ISSN 1359-835X

2007

Thomason, J.L. (2007) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 7. interface strength and fibre strain in injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 210-216. ISSN 1359-835X

2005

Thomason, J.L. (2005) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 6. the properties of injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 36 (7). pp. 995-1003. ISSN 1359-835X

Afendi, M. and Banks, W.M. and Kirkwood, D. (2005) Bubble free resin for infusion process. Composites Part A: Applied Science and Manufacturing, 36 (6). pp. 739-746. ISSN 1359-835X

2002

Thomason, J.L. (2002) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP. Composites Part A: Applied Science and Manufacturing, 33 (12). pp. 1641-1652. ISSN 1359-835X

Thomason, J.L. (2002) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? Composites Part A: Applied Science and Manufacturing, 33 (10). pp. 1283-1288. ISSN 1359-835X

Thomason, J.L. and Adzima, L.J. (2002) Sizing up the interphase: An insider's guide to the science of sizing. Composites Part A: Applied Science and Manufacturing, 32 (3-4). pp. 313-321. ISSN 1359-835X

Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass-reinforced polybutyleneterepthalate. Composites Part A: Applied Science and Manufacturing, 33 (3). pp. 331-339. ISSN 1359-835X

2001

Thomason, J.L. and Kalinka, G. (2001) A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths. Composites Part A: Applied Science and Manufacturing, 32 (1). pp. 85-90. ISSN 1359-835X

This list was generated on Tue Apr 20 15:55:57 2021 BST.