Browse by Journal or other publication

Thomason, James L. (2023) Flat glass fibres : the influence of fibre cross section shape on composite micromechanics and composite strength. Composites Part A: Applied Science and Manufacturing, 169. 107503. ISSN 1359-835X

Minty, Ross F. and Yang, Liu and Thomason, James L. (2023) The dependence of interfacial shear strength on temperature and matrix chemistry in glass fibre epoxy composites. Composites Part A: Applied Science and Manufacturing, 164. 107303. ISSN 1359-835X

Cochrane, A.D. and Serra, J. and Lander, J.K. and Böhm, H. and Wollmann, T. and Hornig, A. and Gude, M. and Partridge, I.K. and Hallett, S.R. (2022) Experimental investigation of high strain-rate, large-scale crack bridging behaviour of z-pin reinforced tapered laminates. Composites Part A: Applied Science and Manufacturing, 155. 106825. ISSN 1359-835X

Ubago Torres, Miguel and Jalalvand, Meisam (2022) Additive binding layers to suppress free edge delamination in composite laminates under tension. Composites Part A: Applied Science and Manufacturing, 156. 106902. ISSN 1359-835X

Thomason, James L. and Rudeiros Fernández, Jose L. (2021) Modelling the influence of fibre internal structure on the measured modulus of technical natural fibres. Composites Part A: Applied Science and Manufacturing, 147. 106478. ISSN 1359-835X

Felfel, Reda M. and Parsons, Andrew J. and Chen, Menghao and Stuart, Bryan W. and Wadge, Matthew D. and Grant, David M. (2021) Water resistant fibre/matrix interface in a degradable composite : synergistic effects of heat treatment and polydopamine coating. Composites Part A: Applied Science and Manufacturing, 146. 106415. ISSN 1359-835X

Kucharek, Mariusz and MacRae, William and Yang, Liu (2020) Investigation of the effects of silica aerogel particles on thermal and mechanical properties of epoxy composites. Composites Part A: Applied Science and Manufacturing, 139. 106108. ISSN 1359-835X

Thomason, J. L. (2019) Glass fibre sizing : a review. Composites Part A: Applied Science and Manufacturing, 127. 105619. ISSN 1359-835X

Thomason, James L. and Nagel, Ulf and Yang, Liu and Bryce, David (2019) A study of the thermal degradation of glass fibre sizings at composite processing temperatures. Composites Part A: Applied Science and Manufacturing, 121. pp. 56-63. ISSN 1359-835X

Rev, Tamas and Jalalvand, Meisam and Fuller, Jonathan and Wisnom, Michael R. and Czél, Gergely (2019) A simple and robust approach for visual overload indication - UD thin-ply hybrid composite sensors. Composites Part A: Applied Science and Manufacturing, 121. pp. 376-385. ISSN 1359-835X

Minty, Ross F. and Yang, Liu and Thomason, James L. (2018) The influence of hardener-to-epoxy ratio on the interfacial strength in glass fibre reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing, 112. 64 - 70. ISSN 1359-835X

Fotouhi, Mohamad and Jalalvand, Meisam and Wisnom, Michael R. (2018) Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110. pp. 29-44. ISSN 1359-835X

Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2018) Hierarchical pseudo-ductile hybrid composites combining continuous and highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 105. pp. 40-56. ISSN 1359-835X

Czél, Gergely and Rev, Tamas and Jalalvand, Meisam and Fotouhi, Mohamad and Longana, Marco L. and Nixon-Pearson, Oliver J. and Wisnom, Michael R. (2018) Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites. Composites Part A: Applied Science and Manufacturing, 104. pp. 151-164. ISSN 1359-835X

Bashir, S.T. and Yang, L. and Anderson, R. and Tang, P.L. and Liggat, J.J. and Thomason, J.L. (2017) A simple chemical approach to regenerating the strength of thermally damaged glass fibre. Composites Part A: Applied Science and Manufacturing, 102. pp. 76-87. ISSN 1359-835X

Pender, K. and Yang, L. (2017) Investigation of the potential for catalysed thermal recycling in glass fibre reinforced polymer composites by using metal oxides. Composites Part A: Applied Science and Manufacturing, 100. pp. 285-293. ISSN 1359-835X

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2016) Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites. Composites Part A: Applied Science and Manufacturing, 91. pp. 436-447. ISSN 1359-835X

Wisnom, M.R. and Czél, G. and Swolfs, Y. and Jalalvand, M. and Gorbatikh, L. and Verpoest, I. (2016) Hybrid effects in thin ply carbon/glass unidirectional laminates : accurate experimental determination and prediction. Composites Part A: Applied Science and Manufacturing, 88. pp. 131-139. ISSN 1359-835X

Thomason, J. L. and Nagel, U. and Yang, L. and Sáez, E. (2016) Regenerating the strength of thermally recycled glass fibres using hot sodium hydroxide. Composites Part A: Applied Science and Manufacturing, 87. pp. 220-227. ISSN 1359-835X

Fotouhi, Mohamad and Suwarta, Putu and Jalalvand, Meisam and Czel, Gergely and Wisnom, Michael R. (2016) Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, 86. pp. 66-76. ISSN 1359-835X

Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Parametric study of failure mechanisms and optimal configurations of pseudo-ductile thin-ply UD hybrid composites. Composites Part A: Applied Science and Manufacturing, 74. pp. 123-131. ISSN 1359-835X

Yu, HaNa and Longana, Marco L. and Jalalvand, Meisam and Wisnom, Michael R. and Potter, Kevin D. (2015) Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres. Composites Part A: Applied Science and Manufacturing, 73. pp. 35-44. ISSN 1359-835X

Czél, Gergely and Jalalvand, Meisam and Wisnom, Michael R. (2015) Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies. Composites Part A: Applied Science and Manufacturing, 72. pp. 75-84. ISSN 1359-835X

Yang, L. and Saez, E.R. and Nagel, U. and Thomason, J. (2015) Can thermally degraded glass fibre be regenerated for closed-loop recycling of thermosetting composites? Composites Part A: Applied Science and Manufacturing, 72. pp. 167-174. ISSN 1359-835X

Jalalvand, Meisam and Czél, Gergely and Wisnom, Michael R. (2015) Damage analysis of pseudo-ductile thin-ply UD hybrid composites - a new analytical method. Composites Part A: Applied Science and Manufacturing, 69. pp. 83-93. ISSN 1359-835X

Thomason, J.L. and Yang, L. and Meier, R. (2014) The properties of glass fibres after conditioning at composite recycling temperatures. Composites Part A: Applied Science and Manufacturing, 61. pp. 201-208. ISSN 1359-835X

Yang, Liu and Thomason, James and Zhu, W.Z. (2011) The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene. Composites Part A: Applied Science and Manufacturing, 42 (10). pp. 1293-1300. ISSN 1359-835X

Yang, Liu and Thomason, J.L. (2010) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods. Composites Part A: Applied Science and Manufacturing, 41 (9). pp. 1077-1083. ISSN 1359-835X

Thomason, J.L. and Ali, J.Z. and Anderson, J. (2010) The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 41 (7). pp. 820-826. ISSN 1359-835X

Thomason, J.L. and Ali, J.Z. (2009) The dimensional stability of glass-fibre reinforced Polyamide 66 during hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 40 (5). pp. 625-634. ISSN 1359-835X

Symington, Mark C. and Banks, W.M. and Opukuro, David West and Pethrick, R.A. (2009) Tensile testing of cellulose based natural fibers for structural composite applications. Composites Part A: Applied Science and Manufacturing, 43 (9). pp. 1083-1108. ISSN 1359-835X

Thomason, J.L. (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 114-124. ISSN 1359-835X

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced Polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (11). pp. 1732-1738. ISSN 1359-835X

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (10). pp. 1618-1624. ISSN 1359-835X

Thomason, J.L. (2007) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 7. interface strength and fibre strain in injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 210-216. ISSN 1359-835X

Thomason, J.L. (2005) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene : 6. the properties of injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 36 (7). pp. 995-1003. ISSN 1359-835X

Afendi, M. and Banks, W.M. and Kirkwood, D. (2005) Bubble free resin for infusion process. Composites Part A: Applied Science and Manufacturing, 36 (6). pp. 739-746. ISSN 1359-835X

Thomason, J.L. (2002) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP. Composites Part A: Applied Science and Manufacturing, 33 (12). pp. 1641-1652. ISSN 1359-835X

Thomason, J.L. (2002) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? Composites Part A: Applied Science and Manufacturing, 33 (10). pp. 1283-1288. ISSN 1359-835X

Thomason, J.L. and Adzima, L.J. (2002) Sizing up the interphase: An insider's guide to the science of sizing. Composites Part A: Applied Science and Manufacturing, 32 (3-4). pp. 313-321. ISSN 1359-835X

Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass-reinforced polybutyleneterepthalate. Composites Part A: Applied Science and Manufacturing, 33 (3). pp. 331-339. ISSN 1359-835X

Thomason, J.L. and Kalinka, G. (2001) A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths. Composites Part A: Applied Science and Manufacturing, 32 (1). pp. 85-90. ISSN 1359-835X