Items where department is "Faculty of Engineering > Mechanical and Aerospace Engineering "

Ugbolue, Ukadike and Gislason, Magnus Kjartan and Fogg, Q.A. and Carter, M. and Riches, Philip and Rowe, Philip (2013) A pilot study to determine the tensile properties of the transverse carpal ligament. In: 24th Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09, Natal. (In Press)

Biggs, James (2013) Quadratic Hamiltonians on non-Euclidean spaces of arbitrary constant curvature. In: European Control Conference, ECC 2013, 2013-07-17 - 2013-07-19, Zurich.

Pagnozzi, Daniele and MacLean, Craig David and Biggs, James (2013) A new approach to the solution of free rigid body motion for attitude manoeuvers. In: European Control Conference, ECC 2013, 2013-07-17 - 2013-07-19, Zurich.

Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2013) Trajectory and spacecraft design for a pole-sitter mission. Journal of Spacecraft and Rockets. ISSN 0022-4650 (In Press)

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) On erosion issues associated with the leading edge of wind turbine blades : Topical Review. Journal of Physics D: Applied Physics. ISSN 0022-3727 (In Press)

MacLean, Craig David and Biggs, James (2013) Path planning for simple wheeled robots : Sub-Riemannian and elastic curves on SE(2). Robotica. ISSN 0263-5747 (In Press)

Owens, Steven Robert and Macdonald, Malcolm (2013) Analogy to bi-elliptic transfers incorporating high- and low-thrust. Journal of Guidance, Control and Dynamics, 36 (3). pp. 890-894. ISSN 0731-5090

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Kindler, Detlef (2013) Measurement and simulation of the flow field around a triangular lattice meteorological mast. Journal of Energy and Power Engineering. ISSN 1934-8975 (In Press)

Vasile, Massimiliano and Vetrisano, Massimo and Gibbings, Alison and Hopkins, John-Mark and Burns, David and Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and Colombo, Camilla and McInnes, Colin and Branco, Joao and Wayman, Alastair and Eckersley, Steven (2013) Light-touch2 : a laser-based solution for the deflection, manipulation and exploitation of small asteroids. In: IAA Planetary Defense Conference, 2013-04-15 - 2013-05-19, Flagstaff.

Lucking, Charlotte and McInnes, Colin (2013) Collision probability of satellite re-entry with area-to-mass-ratio augmentation. In: 9th Symposium on Small Satellites for Earth Observation, 2013-04-08 - 2013-04-12, Berlin.

McGrath, Ciara and Macdonald, Malcolm (2013) Thermal analysis of the CubeSat First-MOVE in preparation for Launch using ESATAN-TMS r4. In: 9th Symposium on Small Satellites for Earth Observation, 2013-04-08 - 2013-04-12, Berlin.

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Easily retrievable objects among the NEO population. Celestial Mechanics and Dynamical Astronomy. ISSN 0923-2958 (In Press)

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2013) Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition. Thin-Walled Structures, 65. pp. 34-48. ISSN 0263-8231

Lockerby, Duncan A. and Duque Daza, C.A. and Borg, Matthew Karl and Reese, Jason (2013) Time-step coupling for hybrid simulations of multiscale flows. Journal of Computational Physics, 237. pp. 344-365. ISSN 0021-9991

Mushet, Garrie and Mingotti, Giorgio and Colombo, Camilla and McInnes, Colin (2013) Autonomous satellite constellation for enhanced Earth coverage using coupled selection equations. In: 7th International Workshop on Satellite Constellation and Formation Flying, 2013-03-13 - 2013-03-15, Lisbon.

Cater, Stephen R. and Martin, Jonathan and Galloway, Alexander and Mcpherson, Norman (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. In: Symposium on Friction Stir Welding and Processing, 2013-03-03. (In Press)

Boyle, James (2013) Some consequences of stress range dependent constitutive models in creep. In: Advanced Structured Materials. Springer-Verlag, Heidelberg, pp. 77-86.

MacKenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Studies, 10. pp. 19-30. ISSN 1642-236X

Madhlopa, Amos and Clarke, Joseph (2013) Computation of irradiance in a solar still by using a refined algorithm. Renewable Energy, 51. pp. 13-21. ISSN 0960-1481

Sanchez Cuartielles, Joan-Pau and Colombo, Camilla (2013) Impact hazard protection efficiency by a small kinetic impactor. Journal of Spacecraft and Rockets, 50 (2). pp. 380-393. ISSN 0022-4650

Thomason, James (2013) On the application of Weibull Analysis to experimentally determined single fibre strength distributions. Composites Science and Technology, 77. pp. 74-80. ISSN 0266-3538

Scheurich, F. and Brown, Richard (2013) Modelling the aerodynamics of vertical-axis wind turbines in unsteady wind conditions. Wind Energy, 16 (2). pp. 91-107. ISSN 1095-4244

Hong, Jun and Kelly, Nicolas and Thomson, M. and Richardson, I. (2013) Assessing heat pumps as flexible load. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (1). pp. 30-42. ISSN 0957-6509

Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2013) Novel orbits of Mercury and Venus enabled using low-thrust propulsion. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14, Kauai, Hawaii.

Garcia Yarnoz, Daniel and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Passive sorting of asteroid material using solar radiation pressure. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14, Kauai, Hawaii.

Owens, Steven Robert and Macdonald, Malcolm (2013) Hohmann spiral transfer with inclination change performed by low-thrust system. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14, Kauai, Hawaii.

Zuiani, Federico and Kawakatsu, Yasuhiro and Vasile, Massimiliano (2013) Multi-objective optimisation of many-revolution, low-thrust orbit raising for Destiny mission. In: 23rd AAS/AIAA Space Flight Mechanics Conference, 2013-02-10 - 2013-02-14, Kauai, Hawaii.

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) Numerical modelling of hailstone impact on the leading edge of a wind turbine blade. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07, Vienna.

Elmayyah, Wael and Dempster, William (2013) Prediction of two-phase flow through a safety relief valve. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227 (1). pp. 42-55. ISSN 0954-4089

Burt, Graeme and Kelly, Nicolas and Entchev, Evgueniy and Hammond, Geoffrey P (2013) Microgeneration and related energy technologies and practices for low-carbon buildings : Guest Editorial. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227. pp. 3-7. ISSN 0957-6509

Dadzie, Kokou (2013) A thermo-mechanically consistent Burnett regime continuum flow equation without Chapman-Enskog expansion. Journal of Fluid Mechanics, 716. pp. 6-11. ISSN 0022-1120

Hasager, C and Stein, F.P. Detlef and Hagemann, Saskia and Pena, Alfredo and Mikkelsen, T. and Stickland, Matthew and Courtney, Michael and Oldroyd, Andrew (2013) NORSEWIND - Array of Wind Lidars and Meteorological Masts Offshore. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07, Vienna.

Quarta, A.A. and Izzo, D. and Vasile, Massimiliano (2013) Time-optimal trajectories to circumsolar space using solar electric propulsion. Advances in Space Research, 51 (3). ISSN 0273-1177

White, Craig and Borg, Matthew Karl and Scanlon, Thomas and Reese, Jason (2013) A DSMC investigation of gas flows in micro-channels with bends. Computers and Fluids, 71. pp. 261-271. ISSN 0045-7930

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2013) A multiscale method for micro/nano flows of high aspect ratio. Journal of Computational Physics, 233. pp. 400-413. ISSN 0021-9991

Sharifi, Shayan and Stack, Margaret and Stephen, L and Li, Wang-Long and Wang, Moo-Chin (2013) Micro-abrasion of Y-TZP in tea. WEAR, 297 (1-2). pp. 713-721. ISSN 0043-1648

Liu, Haihu and Valocchi, Albert J. and Zhang, Yonghao and Kang, Q.J. (2013) Phase-field-based lattice Boltzmann finite difference model for simulating thermocapillary flows. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 87 (1). ISSN 1063-651X

Anderson, Pamela and Macdonald, Malcolm (2013) Extension of highly elliptical Earth orbits using continuous low-thrust propulsion. Journal of Guidance, Control and Dynamics, 36 (1). pp. 282-292. ISSN 0731-5090

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The micropolar elastic behaviour of model macroscopically heterogeneous materials. International Journal of Solids and Structures, 50 (1). 246–255. ISSN 0020-7683

Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2013) Analytical method for perturbed frozen orbit around an Asteroid in highly inhomogeneous gravitational fields : a first approach. Solar System Research. ISSN 0038-0946 (In Press)

Chen, Haofeng and Ure, James Michael and Tipping, David (2013) Calculation of a lower bound ratchet limit part 1 : Theory, numerical implementation and verification. European Journal of Mechanics - A/Solids, 37. pp. 361-368. ISSN 0997-7538

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2013) Orbit evolution, maintenance and disposal of SpaceChip swarms through electro-chromic control. Acta Astronautica, 82 (1). pp. 25-37. ISSN 0094-5765

Dongari, Nishanth and Barber, R.W. and Emerson, David and Stefanov, S. and Zhang, Yonghao (2013) The effect of Knudsen layers on rarefied cylindrical Couette gas flows. Microfluidics and Nanofluidics, 14 (1-2). pp. 31-43. ISSN 1613-4982

Galindo-Rosales, Francisco J and Alves, M.A. and Oliveira, Monica (2013) Microdevices for extensional rheometry of low viscosity elastic liquids : a review. Microfluidics and Nanofluidics, 14 (1-2). pp. 1-19. ISSN 1613-4982

Johnstone, Cameron and Pratt, D. and Clarke, Joseph and Grant, Andrew (2013) A techno-economic analysis of tidal energy technology. Renewable Energy, 49. pp. 101-106. ISSN 0960-1481

Li, Hongjun and Wood, James and McCormack, Ross and Hamilton, Robert (2013) Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure. International Journal of Pressure Vessels and Piping, 101. pp. 154-160. ISSN 0308-0161

McPherson, Norman and Galloway, Alexander and McGhie, W (2013) Thin plate buckling mitigation and reduction challenges for naval ships. Journal of Marine Engineering & Technology. ISSN 1476-1548 (In Press)

Ure, James Michael and Chen, Haofeng and Tipping, David (2013) Calculation of a lower bound ratchet limit part 2 : Application to a pipe intersection and dissimilar material join. European Journal of Mechanics - A/Solids, 37. pp. 369-378. ISSN 0997-7538

Wood, James and Prinja, Nawal and Morris, Tim (2013) Transferring simulation skills from other industries to nuclear. Nuclear Future, 9 (1). pp. 1-7. ISSN 1745-2058

Anderson, Pamela and Macdonald, Malcolm (2013) Sun-synchronous highly elliptical orbits using low-thrust propulsion. Journal of Guidance, Control and Dynamics. ISSN 0731-5090 (In Press)

Barclay, Colin and Campbell, Stuart and Galloway, Alexander and Mcpherson, Norman (2013) Artificial neural network prediction of weld distortion rectification using a travelling induction coil. International Journal of Advanced Manufacturing Technology, 91 (6). 174S-181S. ISSN 0268-3768

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases : part 1: arc pressure measurement. Science and Technology of Welding and Joining. ISSN 1362-1718 (In Press)

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Arc pressure and weld metal fluid flow whilst using alternating shielding gases : part 2: arc force determination. Science and Technology of Welding and Joining. ISSN 1362-1718 (In Press)

Ceccaroni, Marta and Biggs, James (2013) Analytic perturbative theories in highly inhomogeneous graviational fields. Icarus. ISSN 0019-1035 (In Press)

Clarke, Joseph (2013) Moisture flow modelling within the ESP-r integrated building performance simulation system. Journal of Building Performance Simulation. ISSN 1940-1493 (In Press)

Dhinakaran, S. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2013) Steady flow of power-law fluids in a 1:3 planar sudden expansion. Journal of Non-Newtonian Fluid Mechanics. ISSN 0377-0257 (In Press)

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian (2013) Experimental analysis of laser ablated plumes for asteroid deflection and exploitation. Acta Astronautica. ISSN 0094-5765 (In Press)

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue strength of welded joints using the linear matching method. International Journal of Fatigue. ISSN 0142-1123 (Submitted)

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2013) Mission analysis and systems design of a near-term and far-term pole-sitter mission. Acta Astronautica. ISSN 0094-5765 (In Press)

Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Regime mapping and the role of the intemediate region in wall-coated microreactors. Chemical Engineering Science. ISSN 0009-2509 (In Press)

Minisci, Edmondo and Vasile, Massimiliano (2013) Robust design of a re-entry unmanned space vehicle by multi-fidelity evolution control. AIAA Journal. ISSN 0001-1452 (In Press)

Oddsdottir, G.L. and Kristjannson, E. and Gislason, Magnus Kjartan (2013) Database of movement control in the cervical spine : Reference normal of 180 asymptotic persons. Manual Therapy. ISSN 1356-689X (In Press)

Parvez, Shahid and Abid, Muhammad and Nash, David and Fawad, H. and Galloway, Alexander (2013) Effect of torch angle on arc properties and weld pool shape in stationary GTAW. Journal of Engineering Mechanics. ISSN 0733-9399 (In Press)

Sharifi, Shayan and Stack, Margaret (2013) A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions. Journal of Physics D: Applied Physics. ISSN 0022-3727 (In Press)

Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas and Oldroyd, Andrew and Mikkelsen, T. and Astrup, P. (2013) A CFD technique for estimating the flow distortion effects on LiDAR measurements when made in complex flow fields. Engineering Applications of Computational Fluid Mechanics. ISSN 1994-2060 (In Press)

Vasile, Massimiliano and Gibbings, Alison and Hopkins, John-Mark and Burns, David and Watson, Ian (2013) Experimental characterization of the thrust induced by laser ablation on an asteroid. In: IAA Planetary Defense Conference, 2013-04-15 - 2013-05-19, Flagstaff.

Waseem, Affan and Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The influence of void size on the micropolar constitutive properties of model heterogeneous materials. European Journal of Mechanics A: Solids. ISSN 0997-7546 (In Press)

White, Craig and Colombo, Camilla and Scanlon, Thomas and McInnes, Colin and Reese, Jason (2013) Rarefied gas effects on the aerodynamics of high area-to-mass ratio spacecraft in orbit. Advances in Space Research. ISSN 0273-1177 (In Press)

Zuiani, Federico and Vasile, Massimiliano (2013) Multi agent collaborative search based on Tchebycheff decomposition. Computational Optimization and Applications. ISSN 0926-6003 (In Press)

Haward, S.J. and Jaishankar, A. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Extensional flow of hyaluronic acid solutions in an optimized microfluidic cross-slot device. In: Microfluidics 2012. UNSPECIFIED.

Jackson, Colin and Wrzesien, Andrzej and Johnston, Ross P. and Uzzaman, Asraf and Lim, James (2012) Effect of reduced joint strength and semi-rigid joints on cold-formed steel portal frames. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow.

Uzzaman, Asraf and Lim, James B. P. and Nash, David and Rhodes, James and Young, Ben (2012) Experimental and analytical studies of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow. (In Press)

Uzzaman, Asraf and Lim, James B. P. and Nash, David and Rhodes, James and Young, Ben (2012) Parametric studies and design recommendations of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow.

Boyle, James (2012) The effect of material models on elastic follow-up. Transactions of ASME Journal of Pressure Vessel Technology, 134 (6). 061210-1-061210-7. ISSN 1528-8978

Bennet, Derek James and McInnes, Colin (2012) Pattern transition in spacecraft formation flying using bifurcating potential field. Aerospace Science and Technology, 23 (1). pp. 250-262. ISSN 1270-9638

Borg, Simon Paul and Kelly, Nicolas (2012) The development and calibration of a generic dynamic absorption chiller model. Energy and Buildings, 55. pp. 533-544. ISSN 0378-7788

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2012) Techno-economic evaluation of reducing shielding gas consumption in GMAW whilst maintaining weld quality. International Journal of Advanced Manufacturing Technology, 63 (9-12). pp. 975-985.

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2012) Orbital dynamics of high area-to-mass ratio spacecraft with J2 and solar radiation pressure for novel Earth observation and communication services. Acta Astronautica, 81 (1). pp. 137-150. ISSN 0094-5765

Porteous, C. D. A. and Sharpe, T. R. and Menon, R. A. and Shearer, D. and Musa, H. and Baker, P. H. and Sanders, C. H. and Strachan, P. A. and Kelly, N. J. and Markopoulos, A. (2012) Energy and environmental appraisal of domestic laundering appliances. Building Research and Information, 40 (6). pp. 679-699. ISSN 0961-3218

Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2012) Divergent streamlines and free vortices in Newtonian fluid flows in microfluidic flow focusing devices. Journal of Fluid Mechanics, 711. pp. 171-191. ISSN 0022-1120

Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22, Tripoli. (In Press)

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) Gravitationally bound geoengineering dust shade at the inner Lagrange point. Advances in Space Research, 50 (10). pp. 1405-1410. ISSN 0273-1177

Thomason, James and Yang, Liu (2012) A novel combination of micromechanical testing and thermal analysis : to investigate the temperture dependence of interfacial adhesion in fibre reinforced polymer composites. In: 2012 Materials Characterisation Seminar & TA Instruments Users Meeting, 2012-11-06 - 2012-11-06, Donington Park, Derby. (Unpublished)

Ceriotti, Matteo and Diedrich, Benjamin and McInnes, Colin (2012) Novel mission concepts for polar coverage : An overview of recent developments and possible future applications. Acta Astronautica, 80. pp. 89-104. ISSN 0094-5765

Trendafilova, Irina and Manoach, Emil (2012) Vibration-based methods for structural and machinery fault diagnosis based on nonlinear dynamics tools. In: Fault Diagnosis in Robotic and Industrial Systems. IConcept Press LTD, Article 6. ISBN 978-1461098744

Yang, Liu and Thomason, James (2012) Effect of Silane coupling agent on mechanical performance of glass fibre. Journal of Materials Science, 48. pp. 1947-1954. ISSN 0022-2461

Anderson, Pamela and Macdonald, Malcolm and Yen, Chen-wan L. (2012) Extension of Martian orbits using continuous low-thrust propulsion. In: 23rd Space Flight Dynamics Symposium, 2012-10-29 - 2012-11-02, Pasadena, California.

Duering, Marcel and Vasile, Massimiliano and Landgraf, M. (2012) Uncontrolled spacecraft formations on two-dimensional invariant tori. In: 23rd International Symposium on Spaceflight Dynamics, 2012-10-29 - 2012-11-02, Pasadena.

Mushet, Garrie and Colombo, Camilla and McInnes, Colin (2012) Autonomous control of a reconfigurable constellation of satellites on geostationary orbit with artificial potential fields. In: 23rd International Symposium on Space Flight Dynamics, ISSFD 2012, 2012-10-29 - 2012-11-02, Pasadena, California.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effect of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: 21st International Specialty Conference on Cold Formed Steel Structures, 2012-10-24 - 2013-03-25, St Louis.

Uzzaman, Asraf and Lim, James B. P. and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web holes on web crippling strength of cold-formed steel channels under end-two-flange loading condition. In: 21st Specialty Conference on Cold-Formed Steel Structures, 2012-10-24 - 2012-10-25, St Louis, Missouri.

Tuohy, Paul Gerard and Murphy, Gavin Bruce and Devici, Gokay (2012) Lessons from post occupancy evaluation and monitoring of the 1st Passive House in Scotland. In: Passivhus Norden Conference, 2012-10-22 - 2012-10-23, Trondheim.

Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter (2012) Regeneration of the performance of glass fibre recycled from end-of-life composites or glass fibre waste. In: International Glass Fiber Symposium, 2012-10-16 - 2012-10-19, Aachen.

Thomason, James and Yang, Liu and Kao, Chih-Chuan and Jenkins, Peter (2012) Regeneration of the performance of glass fibre recycled from end-of-life composites or glass fibre waste. In: International Glass Fiber Symposium, 2012-10-16 - 2012-10-19, Aachen.

Gislason, Magnus Kjartan and Nash, David (2012) Finite element modelling of a multi bone joint : The human wrist. In: Finite element analysis. InTech, Croatia, pp. 77-98. ISBN 9789535107699

Borggrafe, Andreas and Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Coupled orbit and attitude dynamics of a reconfigurable spacecraft with solar radiation pressure. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Ceccaroni, Marta and Biggs, James (2012) Analytical perturbation method for frozen orbits around the asteroid 433 Eros. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Ceriotti, Matteo and McInnes, Colin (2012) Design of trajectories for continuous polar Earth observation in the Earth-Moon system. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Clark, Rhuaridh and Sinn, Thomas and Lucking, Charlotte and Donaldson, Nathan and Brown, Roy and Parry, Thomas (2012) StrathSat-R : Deploying inflatable CubeSat structures in micro gravity. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Colombo, Camilla and Xu, Ming and McInnes, Colin (2012) Stabilisation of the hyperbolic equilibrium of high area-to-mass spacecraft. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2012) Hybrid low-thrust transfers to eight-shaped orbits for polar observation. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Komninou, Eirini and Vasile, Massimiliano and Minisci, Edmondo (2012) Optimal dynamic operations scheduling for small-scale satellites. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Mission and system design of a 3U CubeSat for passive GTO to LEO transfer. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

MacLean, Craig David and Biggs, James (2012) Attitude motion planning for a spin stabilised disk sail. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Owens, Steven Robert and Macdonald, Malcolm (2012) An extension and numerical analysis of the Hohmann spiral transfer. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Punzo, Giuliano and Dobie, Gordon and Bennet, Derek James and Jamieson, Jonathan and Macdonald, Malcolm (2012) Low-cost, multi-agent systems for planetary surface exploration. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and Alessi, Elisa Maria and McInnes, Colin (2012) Gravitational capture opportunites for asteroid retrieval missions. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Sinn, Thomas and McRobb, M. and Wujek, Adam and Skogby, Jerker and Rogberg, Fredrik and Wang, Junyi and Vasile, Massimiliano and Tibert, Gunnar (2012) Results of REXUS12's Suaineadh Experiment : Deployment of a spinning space web in micro gravity conditions. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Sinn, Thomas and Vasile, Massimiliano (2012) Bio-inspired programmable matter for space applications. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Van Der Weg, Willem Johan and Vasile, Massimiliano (2012) high area-to-mass ratio hybrid propulsion Earth to Moon transfers. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Vasile, Massimiliano (2012) Fractionated solar power satellite for regional coverage. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Vasile, Massimiliano and Maddock, Christie (2012) Design of a formation of solar pumped lasers for asteroid deflection. Advances in Space Research, 50 (7). pp. 891-905. ISSN 0273-1177

Vetrisano, Massimo and Vasile, Massimiliano (2012) Collaborative navigation and control of disaggregated spacecraft in the proximity of minor bodies. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Vetrisano, Massimo and Yang, Huixin and Vasile, Massimiliano and Zhang, Wei (2012) Autonomous navgation of spacecraft formations for asteroid exploration. In: 23rd International Symposium on Spaceflight Dynamics, 2012-10-29 - 2012-11-02, Pasadena.

Zuiani, Federico and Vasile, Massimiliano (2012) Extension of finite perturbative elements for multi-revolution low-thrust transfer optimisation. In: 63rd International Astronautical Congress, 2012-10-01 - 2012-10-05, Naples.

Ceccaroni, Marta and Biggs, James and Biasco, Luca (2012) Analytic estimates and topological properties of the weak stability boundary. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 1-24. ISSN 0923-2958

Ceriotti, Matteo and McInnes, Colin (2012) Natural and sail-displaced doubly-symmetric Lagrange point orbits for polar coverage. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 151-180. ISSN 0923-2958

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Design of optimal Earth pole-sitter transfers using low-thrust propulsion. Acta Astronautica, 79. pp. 253-268. ISSN 0094-5765

Nicholls, William and Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2012) Water transport through carbon nanotubes with defects. Molecular Simulation, 38 (10). pp. 781-785. ISSN 0892-7022

Vetrisano, M. and Van der Weg, W. and Vasile, M. (2012) Navigating to the Moon along low-energy transfers. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 25-53. ISSN 0923-2958

Yang, Liu and Thomason, James (2012) Development and application of micromechanical techniques for characterising interfacial shear strength in fibre-thermoplastic composites. Polymer Testing, 31 (7). 895–903. ISSN 0142-9418

Zuiani, Federico and Gibbings, Alison and Vetrisano, Massimo and Rizzi, Francesco and Martinez, Cesar and Vasile, Massimiliano (2012) Orbit determination and control for the European Student Moon Orbiter. Acta Astronautica, 79. pp. 67-78. ISSN 0094-5765

Zuiani, Federico and Vasile, Massimiliano and Gibbings, Alison (2012) Evidence-based robust design of deflection actions for near Earth objects. Celestial Mechanics and Dynamical Astronomy, 114 (1-2). pp. 107-136. ISSN 0923-2958

Oliveira, Monica (2012) Complex fluid flows at the micro-scale : An experimental perspective. In: Seminar at the 4th Steering & Impact Committee Meeting, 2012-09-28 - 2012-09-28, Gaydon.

Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27, London.

Ceccaroni, Marta and Biscani, Francesco and Biggs, James (2012) Analytical method for perturbed frozen orbit around an asteroid in highly inhomogeneous gravitational fields. In: 2012 Analytical Methods in Celestial Mechanics, 2012-09-26 - 2012-09-29, St Petersburg.

Ceriotti, Matteo and Heiligers, Jeannette and McInnes, Colin (2012) Novel pole-sitter mission concepts for continuous polar remote sensing. In: SPIE Remote Sensing Conference 2012, 2012-09-24 - 2012-09-27, Edinburgh.

Haward, S.J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Optimized cross-slot flow geometry for microfluidic extension rheometry. Physical Review Letters, 109 (12). ISSN 0031-9007

Trendafilova, Irina and Pallazetti, Roberto (2012) Delamination assessment in structures made of composites based on signal cross-correlation. In: ISMA2012 International Conference on Noise and Vibration Engineering, 2012-09-17 - 2012-09-19, Leuven.

Caboni, M. and Minisci, Edmondo and Campobasso, M and Padulo, M (2012) Robust aerodynamic design optimization of variable speed wind turbine rotors. In: 10th Aerodynamic Design Optimisation Seminar, ADOS 2012, 2012-09-13 - 2012-09-14, Derby.

Clarke, Joseph and Cockroft, Jeremy and Hand, Jon and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) Embedding building simulation constructs within focused applications. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11, Loughborough.

Clarke, Joseph and Hand, Jon and Kelly, Nicolas and Malik, Asma and Samuel, Aizaz and Strachan, Paul and Tuohy, Paul Gerard (2012) A data model for integrated building performance simulation. In: Building Simulation and Optimization Conference, BSO12, 2012-09-10 - 2012-09-11, Loughborough.

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic T-channels for extensional rheology. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14, Vienna.

Oliveira, Monica and Haward, S.J. and McKinley, G.H. and Alves, M.A. (2012) Cross-slot flow for extensional rheometry : From optimization to experimentation. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14, Vienna.

Sousa, P.C. and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2012) Flow of a blood analogue fluid through microchannels with a hyperbolic-shaped stenosis. In: 20th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS2012, 2012-09-10 - 2012-10-14, Vienna.

Sousa, P.C. and Afonso, A.M. and Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2012) Microfluidics with non-Newtonian fluids and elastic instabilities. In: 9th European Fluid Mechanics Conference, EFMC9, 2012-09-09 - 2012-09-13, Rome.

Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07, Glasgow. (Unpublished)

Guechaichia, Abdelhamid and Trendafilova, Irina (2012) A simple frequency-based delamination detection and localization method without baseline model. Journal of Physics Conference Series, 382 (1). ISSN 1742-6588

Johnson, Les and Young, Roy and Barnes, Nathan and Friedman, Louis and Lappas, Vaios and McInnes, Colin (2012) Solar Sails : Technology and demonstration status. International Journal of Aeronautical & Space Sciences, 13 (4). pp. 421-427. ISSN 2093-274X

Kokogiannakis, Georgios and Tuohy, Paul Gerard and Darkwa, Jo (2012) Impact of material surface properties on building performance across a variety of climates. International Journal of Low-Carbon Technologies, 7 (3). pp. 181-187. ISSN 1748-1317

Le, Nam Tuan Phuong and White, Craig and Reese, Jason and Myong, R.S. (2012) Langmuir-Maxwell and Langmuir-Smoluchowski boundary conditions for thermal gas flow simulations in hypersonic aerodynamics. International Journal of Heat and Mass Transfer, 55 (19-20). pp. 5032-5043. ISSN 0017-9310

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Electrochromic orbit control for smart-dust devices. Journal of Guidance, Control and Dynamics, 35 (5). pp. 1548-1558. ISSN 0731-5090

Macdonald, Malcolm and Anderson, Pamela and Warren, Carl (2012) A novel design concept for space-based polar remote sensing. In: SPIE Remote Sensing Conference 2012, 2012-09-24 - 2012-09-27, Edinburgh.

Pescetelli, Fabrizio and Minisci, Edmondo and Maddock, Christie and Taylor, Ian and Brown, Richard (2012) Ascent trajectory optimisation for a single-stage-to-orbit vehicle with hybrid propulsion. In: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, 2012-09-24 - 2012-09-28, Tours.

Telfer, C.G. and Stack, Margaret and Jana, Buddhadev (2012) Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries. Tribology International, 53. pp. 35-44. ISSN 0301-679X

Trendafilova, Irina (2012) An inverse vibration-based approach towards modelling and damage identification in nonlinearly vibrating structures. Application for delamination detection in a composite beam. Journal of Physics Conference Series, 382 (1). ISSN 1742-6588

Wuilbercq, Romain and Ahmad, Abdul Ossman and Scanlon, Thomas and Brown, Richard (2012) Towards robust aero-thermodynamic predictions for re-usable single-stage to orbit vehicles. In: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, 2012-09-24 - 2012-09-28, Tours.

Oliveira, Monica (2012) Microfluidic flows of complex fluids : Applications in rheology. In: Seminar at the Institute of Engineering Thermophysics, Chinese Academy of Sciences, 2012-08-31 - 2012-08-31, Beijing.

Oliveira, Monica (2012) Microfluidic flows of complex fluids : Applications in rheology. In: Seminar at the Hydraulic Engineering Department, Tsinghua University, 2012-08-30 - 2012-08-30, Beijing.

Lowe, Christopher John and Macdonald, Malcolm and Greenland, Stephen and McKee, David (2012) Charybdis : The next generation in ocean colour and biogeochemical remote sensing. In: 26th Annual AIAA/USU Conference on Small Satellites, 2012-08-13 - 2012-08-16, Logan, Utah. (In Press)

Masi, Luca and Vasile, Massimiliano (2012) Optimal multi-objective discrete decision making using a multidirectional modified Physarum solver. In: EVOLVE 2012 International Conference, 2012-08-07 - 2012-08-09, Mexico City.

Vasile, Massimiliano and Zuiani, Federico (2012) Evidence-based robust design optimisation of space systems. In: EVOLVE 2012 International Conference, 2012-08-07 - 2012-08-09, Mexico City.

Campo-Deaño, Laura and Dullens, Roel P. and Carneiro, R.D. and Pinho, F.T. and Oliveira, Monica (2012) A new blood analogue solution applications from micro- to milli-channels. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2012) Study on the blockage mechanism in low viscosity Boger-like fluid flows through unconsolidated beds. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Carneiro, J. and Campo-Deaño, Laura and Oliveira, Monica and Pinho, F.T. (2012) Flow of blood analogue fluids through simplified intercranial aneurisms : effect of geometrical parameters. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Galindo-Rosales, Francisco J and Aarts, D and Alves, M.A. and Oliveira, Monica (2012) A novel use for the cross-slot microfluidic device in extensional micro-rheometry. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) Assessing the flow of low viscosity Boger-like fluids through microfluidic analogues of a porous medium. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. (2012) Design of optimized microfluidic devices for application in extensional rheology. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Haward, S.J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Experimental validation of an optimized cross-slot geometry for extensional rheometry of complex fluids. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Oliveira, Monica and Afonso, A.M. and Pinho, F.T. and Alves, M.A. (2012) High Deborah-number contraction flows in microdevices. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Silva, A.F. and Alves, M.A. and Oliveira, Monica (2012) Numerical study of the flow hemodynamics in intracranial aneurisms. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) Effect of the aspecto ration on the viscoelastic fluid flow in a cross-slot micro-geometry. In: XVI International Congress on Rheology, 2012-08-05 - 2012-08-10, Lisbon.

Thomason, James and Carruthers, John (2012) Natural fibre cross sectional area, its variability and effects on the determination of fibre properties. Journal of Biobased Materials and Bioenergy, 6 (4). pp. 424-439. ISSN 1556-6560

Abid, Muhammad and Parvez, Shahid and Nash, David and Fawad, H. (2012) 3Dimensional simulation of stationary gas tungsten arc welding of L-shape, V-shape and open-corner joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1354-1368. ISSN 0954-4054

Gibbings, Alison and Vasile, Massimiliano and Hopkins, John-Mark and Burns, David and Watson, Ian (2012) Potential of laser-induced ablation for future space applications. Space Policy, 28 (3). pp. 149-153. ISSN 0265-9646

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) A passive satellite deorbiting strategy for medium Earth orbit using solar radiation pressure and the J(2) effect. Acta Astronautica, 77. pp. 197-206. ISSN 0094-5765

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2012) Incorporation of TiC on Alsi 4340 low alloy steel surfaces via tungsten inert gas arc melting. Advanced Materials Research, 445. pp. 655-660. ISSN 1022-6680

Ramsey, Gemma and Galloway, Alexander and Campbell, Stuart and Mcpherson, Norman and Scanlon, Thomas (2012) A computational fluid dynamic analysis of the effect of side draughts and nozzle diameter on shielding gas coverage during gas metal arc welding. Journal of Materials Processing Technology, 212 (8). pp. 1694-1699. ISSN 0924-0136

Thomason, James (2012) Glass fibre sizings : A review of the scientific literature. Amazon Media EU. ISBN 978-0-9573814-0-7

Costa, E.D. and Carneiro, J. and Oliveira, Monica and Campos, J.B.L.M. and Miranda, J.M. (2012) Fabrication of milli-scale channels for hemodynamc studies. In: 15th International Conference on Experimental Mechanics, 2012-07-22 - 2012-07-27, Porto.

Docherty, Stephanie and Nicholls, William and Borg, Matthew Karl and Reese, Jason (2012) Boundary conditions for molecular dynamics simulation of water transport through carbon nanotubes. In: 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2012-07-16 - 2012-07-18, St George's Bay.

Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) Linear matching method on the evaluation of cyclic behaviour with creep effect. In: ASME Pressure Vessels and Piping Conference 2012, 2012-07-15 - 2012-07-20, Toronto.

Babac, Gulru and Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Thermal transpiration of nanoscale gas flow. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13, Zaragosa.

Dadzie, Kokou and Dongari, Nishanth (2012) Transition regime analytical solution to gas mass flow rate in a rectangular micro channel. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13, Zaragosa.

Dongari, Nishanth and White, Craig and Scanlon, Thomas and Zhang, Yonghao and Reese, Jason (2012) Rarefaction effects in gas flows over curved surfaces. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13, Zaragosa.

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2012) Molecular dynamics simulations of high speed rarefied gas flows. In: 28th International Symposium on Rarefied Gas Dynamics, 2012-07-09 - 2012-07-13, Zaragosa.

Crowley, B. J. B. and Bingham, R. and Evans, R. G. and Gericke, D. O. and Landen, O. L. and Murphy, C. D. and Norreys, P. A. and Rose, S. J. and Tschentscher, Th and Wang, C. H. -T and Wark, J. S. and Gregori, G. (2012) Testing quantum mechanics in non-Minkowski space-time with high power lasers and 4th generation light sources. Scientific Reports, 2. ISSN 2045-2322

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Research Publishing Services, National University of Singapore, Singapore, pp. 179-186. ISBN 978-981-07-2615-7

Sasagawa, K and Coupaud, S. and Gislason, Magnus Kjartan and Hatem, Q and Tanner, Elizabeth and Allan, David and Tanabe, Y (2012) A finite element modelling for the tibia of a spinal cord injured patient. In: 18th Congress of the European Society of Biomechanics, 2012-07-01 - 2012-07-04, Lisbon.

Famuyibo, A.A. and Duffy, Aidan and Strachan, Paul (2012) Developing archetypes for domestic dwellings : An Irish case study. Energy and Buildings, 50. pp. 150-157. ISSN 0378-7788

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Modelling micropolar behaviour in cortical bone. Journal of Biomechanics, 45 (1). S52-S52. ISSN 0021-9290

Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207

Greenshields, Christopher and Reese, Jason (2012) Rarefied hypersonic flow simulations using the Navier-Stokes equations with non-equilibrium boundary conditions. Progress in Aerospace Sciences, 52 (1). pp. 80-87. ISSN 0376-0421

Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Olsson Robbie, Mikael and Zhang, Yuxuan (2012) The metallurgy, mechanics, modelling and assessment of dissimilar material brazed joints. Journal of Nuclear Materials. ISSN 0022-3115 (In Press)

Jappy, Alan and MacKenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20, Toronto.

Jappy, Alan and MacKenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20, Toronto.

Linton, Carol and Holderbaum, William and Biggs, James (2012) Rigid body trajectories in different 6D spaces. ISRN Mathematical Physics. ISSN 2090-4673 (In Press)

Pierce, Stephen and Punzo, Giuliano and Dobie, Gordon and Summan, Rahul and MacLeod, Charles Norman and McInnes, Colin and Biggs, James and Macdonald, Malcolm and Bennet, Derek James (2012) Reconfigurable robotic platforms for structural health monitoring. In: 6th European Workshop on Structural Health Monitoring & 1st European Conference of the Prognostics and Health Management (PHM) Society, 2012-07-03 - 2012-07-06, Dresden.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, B. (2012) Cold-Formed Steel Sections with Web Openings Subjected to Web Crippling under Two-Flange Loading Conditions — Part I : Tests and Finite Element Analysis. Thin-Walled Structures, 56. pp. 38-48. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions — Part II : Parametric study and proposed design equations. Thin-Walled Structures, 56. pp. 79-87. ISSN 0263-8231

Yang, Liu (2012) The role of residual thermal stress in interfacial strength of polymer composites by a novel single fibre technique. In: 3rd IFAC/IFIP/IFORS/IEA Conference on Analysis, Design and Evaluation of Man-Machine Systems, 1988-06-14 - 1988-06-16, Oulu.

Downes, Kerrie Ann and Thomason, James (2012) The absorption of automotive coolant fluids in glass fibre reinforced polyamide 6,6 at elevated temperatures. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Gentles, Fiona and Thomason, James (2012) Investigation of interfacial strength between polyethylene terephthalate fibre and maleic anhydride modified polypropylene. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Jenkins, Peter George and Thomason, James and Meier, R. (2012) Separation of mechanical and thermal degradation of thermally conditioned sized glass fibre. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Reilly, Susan Patricia and Faull, K. and Thomason, James (2012) The effect of aging on the mechanical properties of carbon fibre reinforced epoxy. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Rudeiros Fernandez, Jose Luis and Thomason, James (2012) Characterisation of the mechanical performance of natural fibres for lightweight automotive applications. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Thomason, James and Gentles, Fiona and Brennan, A. (2012) Natural fibre cross sectional area effects on the determination of fibre mechanical properties. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Thomason, James and Ure, James Michael and Yang, Liu and Kao, Chih-Chuan (2012) Mechanical study on surface treated glass fibres after thermal conditioning. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Yang, Liu and Thomason, James (2012) The role of residual thermal stress in composite interfacial strength by a novel single fibre technique. In: 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venice.

Liu, Haihu and Zhang, Yonghao and Valocchi, Albert J. (2012) Modelling and simulation of thermocapilliary flows using lattice Boltzmann method. Journal of Computational Physics, 231 (12). ISSN 0021-9991

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2012) Modelling rain drop impact of offshore wind turbine blades. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15, Copenhagen.

Chacon-Nava, J.G. and Almeraya-Calderon, F. and Martinez-Villafane, A. and Orozco-Carmona, V.M. and Stack, Margaret (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE.

Wu, Lei and Meng, Jian-Ping and Zhang, Yonghao (2012) Kinetic modelling of the quantum gases in the normal phase. Proceedings of the Royal Society Part A - Mathematical, Physical and Engineering Sciences, 468 (2142). pp. 1799-1823. ISSN 1364-5021

Dongari, Nishanth and Barber, R.W. and Emerson, David and Zhang, Yonghao and Reese, Jason (2012) Velocity inversion in cylindrical Couette gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08, Skiathos Island.

Lockerby, Duncan A. and Duque Daza, C.A. and Borg, Matthew Karl and Reese, Jason (2012) Efficient time-step coupling for hybrid continuum/molecular modelling of unsteady micro-scale gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08, Skiathos Island.

Meng, Jian-Ping and Dongari, Nishanth and Reese, Jason and Zhang, Yonghao (2012) A kinetic switching criterion of hybrid modelling of multiscale gas flows. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08, Skiathos Island.

White, Craig and Borg, Matthew Karl and Scanlon, Thomas and Reese, Jason (2012) Accounting for rotational non-equilibrium effects in subsonic DSMC boundary conditions. In: 1st European Conference on Gas Micro Flows, GAMEMS 2012, 2012-06-06 - 2012-06-08, Skiathos Island.

Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and Mcpherson, Norman (2012) A potential solution to GMAW gas flow optimisation. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08, Chicago.

Mcpherson, Norman and Galloway, Alexander and Cater, S.R. and Osman, M.M. (2012) A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08, Chicago. (In Press)

Mcpherson, Norman and Galloway, Alexander and Wood, James and Cater, S.R. (2012) A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08, Chicago. (In Press)

Boyle, James (2012) Stress relaxation and elastic follow-up using a stress range-dependent constitutive model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1472-1483. ISSN 0954-4062

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2012) Evaluation of gas metal arc welding with alterating shielding gases for use on AA6082T6. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226. pp. 992-1000. ISSN 0954-4054

Campbell, Stuart William and Galloway, Alexander and McPherson, Norman (2012) Artificial neural network prediction of weld geometry performed using GMAW with alternating shielding gases. Welding Journal, 91 (6). 174S-181S. ISSN 0043-2296

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, Fernando T. and Alves, Manuel A. and Oliveira, Monica (2012) Nanogel formation of polymer solutions flowing through porous media. Soft Matter, 8 (24). pp. 6445-6453. ISSN 1744-683X

Colombo, Camilla and McInnes, Colin (2012) Orbit design for future SpaceChip swarm missions in a planetary atmosphere. Acta Astronautica. pp. 25-41. ISSN 0094-5765 (In Press)

Linton, Carol and Holderbaum, William and Biggs, James (2012) Closed form solution for p-curves in SO(4). In: American Control Conference, 2012-06-27 - 2012-06-29, Montreal. (In Press)

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2012) Solar radiation pressure augmented deorbiting from high altitude sun-synchronous orbits. In: 4S Symposium 2012, Small Satellites Systems and Services, 2012-06-04 - 2012-06-08, Portoroz.

Minisci, Edmondo and Campobasso, Michele Sergio and Vasile, Massimiliano (2012) Robust aerodynamic design of variable speed wind turbine rotors. In: ASME Turbo Expo 2012 Technical Conference, 2012-06-11 - 2012-06-15, Copenhagen.

Rahman, Mahbubur and Lim, James B.P. and Xu, Yixiang and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David (2012) Effect of column base strength on steel portal frames in fire. Proceedings of the ICE - Structures and Buildings, 166 (4). pp. 197-216. ISSN 0965-0911

Wilson, K. and Stack, Margaret and Abdelrahman, S.M. (2012) CFD of erosion-corrosion of Fe : Comparison between predictive models. WEAR. ISSN 0043-1648 (In Press)

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2012) Haversian canal structures can be associated with size effects in cortical bone. In: Euromech 534 Colloquium: Advanced experimental approaches and inverse problems in tissue biomechanics, 2012-05-29 - 2012-05-31, St Etienne.

Hamilton, Niall Robert and Wood, James (2012) Observations on the modelling and assessment of dissimilar material brazed joints. In: NAFEMS UK Conference, 2012-05-30 - 2012-05-31, Belton Woods, Lincolnshire. (In Press)

Oliveira, Monica and Haward, S.J. and McKinley, G.H. and Alves, M.A. (2012) Extensional flow of viscoelastic fluids in an Optimised Cross-slot Extensional Rheometer (OSCER). In: 25th Scottish Fluid Mechanics Meeting, 2012-05-30 - 2012-05-30, Edinburgh.

Sousa, P.C. and Afonso, A.M. and Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2012) Microfluidics with complex fluids. In: 4th National Conference on Fluid Mechanics, 2012-05-28 - 2012-05-29, Lisbon.

Azvedo, B.M.C. and Oliveira, Monica and Pinho, F.T. (2012) Estudo numerico da hemodinâmica em modelos simplificados de aneurismas saculares cerebrais. In: VIII Congresso Português de Neuradiologia, 2012-05-25 - 2012-05-26, Porto.

Masi, Luca and Vasile, Massimiliano (2012) A multi-directional modified physarum solver for discrete decision making. In: Bioinspired Optimization Methods and their Applications, BIOMA 2012, 2012-05-24 - 2012-05-25, Bohinj.

Zuiani, Federico and Vasile, Massimiliano (2012) Multi-agent collaborative search with Tchebycheff decomposition and monotonic basin hopping steps. In: Bioinspired Optimization Methods and their Applications, BIOMA 2012, 2012-05-24 - 2012-05-25, Bohinj.

Sanchez Cuartielles, Joan-Pau and Garcia Yarnoz, Daniel and McInnes, Colin (2012) Near-Earth asteroid resource accessibility and future capture mission opportunities. In: Global Space Exploration Conference, 2012-05-22 - 2012-05-24, Washington DC. (In Press)

Boyle, James (2012) A re-assessment of elastic follow-up in high temperature piping. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23, London.

Chen, Weihang and Chen, Haofeng (2012) Cyclic J integral using linear matching method. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23, London.

Dempster, William and Elmayyah, Wael (2012) Two-phase discharge flow prediction in safety valves. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23, London.

Li, Hongjun and Wood, James and McCormack, Ross (2012) Shakedown behaviour of a 90 degree single mitred pipe bends under cyclic in-plane closing moments. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23, London. (In Press)

Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2012) Linear matching method for ratchet limit prediction in comparison to Rolls Royce's Hierarchical Finite Element Framework. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23, London.

Ure, James Michael and Chen, Haofeng and Tipping, David (2012) Development and implementation of the Abaqus subroutines and plug-in for routine structural integrity assessment using the linear matching method. In: SIMULIA Community Conference 2012, (Formerly the ABAQUS Users Conference), 2012-05-14 - 2012-05-17, Providence.

Tian, Qing and Wu, Lei and Zhang, Yonghao and Zhang, Jie-Fang (2012) Vortex solutions in defocusing media with spatially inhomogeneous nonlinearity. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 85 (5). ISSN 1063-651X

Murphy, Gavin Bruce (2012) Inverse Dynamics based Energy Assessment and Simulation : IDEAS. PhD thesis, Mechanical And Aerospace Engineering.

Sinn, Thomas and Vasile, Massimiliano (2012) Design and development of a deployable self-inflating adaptive membrane. In: 20th AIAA/ASME/AHS Adaptive Structures Conference, 2012-04-23 - 2012-04-26, Honolulu, Hawaii.

Vasile, Massimiliano and Minisci, Edmondo and Wijnands, Quirien (2012) Approximated computation of belief functions for robust design optimization. In: 14th AIAA Non-Deterministic Approaches Conference, 2012-04-23 - 2012-04-26, Honolulu, Hawaii.

Johnston, James and Counsell, John and Banks, G and Stewart, Matt John (2012) Beyond Power over Ethernet : the development of Digital Energy Networks for buildings. In: CIBSE Technical Symposium 2012 - Buildings Systems and Services for the 21st Century, 2012-04-18 - 2012-04-19, London.

Murphy, Gavin Bruce and Baster, Michael Eric and Allison, John and Counsell, Sean (2012) Simplified modelling of air source heat pumps producing detailed results. In: CIBSE Technical Symposium 2012 - Buildings Systems and Services for the 21st Century, 2012-04-18 - 2012-04-19, London.

Dadzie, Kokou and Reese, Jason (2012) Analysis of the thermomechanical inconsistency of some extended hydrodynamic models at high Knudsen number. Physical Review E, 85 (4). ISSN 1539-3755

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Mikkelsen, T. (2012) Measurement and simulation of the flow field around a triangular lattice meteorological mast. In: European Wind Energy Conference, EWEC 2012, 2012-04-16 - 2012-04-19, Copenhagen.

Tuohy, Paul Gerard and Murphy, Gavin Bruce (2012) Why advanced buildings don't work? In: 7th Windsor Conference: The changing context of comfort in an unpredictable world, 2012-04-12 - 2012-04-15, London.

Wu, Lei and Zhang, Yonghao (2012) Applicability of the Boltzmann equation for a two-dimensional Fermi gas. Physical Review A, 85 (4). ISSN 1050-2947

Thomason, James and Yang, Liu (2012) Temperature dependence of the interfacial shear strength in glass-fiber polypropylene composite investigated by a novel single fiber technique. In: ANTEC 2012 Conference, 2012-04-02 - 2012-04-04, Orlando, Florida.

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) The feasibility of using an L1 positioned dust cloud as a method of space-based geoengineering. Advances in Space Research, 49 (7). pp. 1212-1228. ISSN 0273-1177

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

Biggs, James and Horri, Nadjim (2012) Optimal geometric motion planning for spin-stabilized spacecraft. Systems and Control Letters, 61 (4). pp. 609-616. ISSN 0167-6911

Boyle, James (2012) The creep behavior of simple structures with a stress range-dependent constitutive model. Archive of Applied Mechanics, 82 (4). pp. 495-514. ISSN 0939-1533

Mollicone, Pierluigi and Gray, Thomas and Camilleri, Duncan (2012) Experimental investigation and finite element analysis of welding induced residual stresses. Journal of Strain Analysis for Engineering Design, 47 (3). pp. 140-152. ISSN 0309-3247

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) Assessment on the feasibility of future shepherding of asteroid resources. Acta Astronautica, 73. pp. 49-66. ISSN 0094-5765

Tremblay, Mark S. and LeBlanc, Allana G. and Carson, Valerie and Choquette, Louise and Gorber, Sarah Connor and Dillman, Carrie and Duggan, Mary and Gordon, Mary Jane and Hicks, Audrey and Janssen, Ian and Kho, Michelle E. and Latimer-Cheung, Amy E. and LeBlanc, Claire and Murumets, Kelly and Okely, Anthony D. and Reilly, John J. and Spence, John C. and Stearns, Jodie A. and Timmons, Brian W. (2012) Canadian physical activity guidelines for the early years (aged 0-4 years). Applied physiology, nutrition, and metabolism = Physiologie appliquée, nutrition et métabolisme, 37 (2). pp. 345-355. ISSN 1715-5312

Afonso, A.M. and Oliveira, Monica and Oliveira, P.J. and Alves, M.A. and Pinho, F.T. (2012) The finite-volume method in computational rheology. In: Finite-Volume Methods - Powerful Means of Engineering Design. In-Tech Open Publishers, Ch 7, pp 141-170. ISBN 978-953-51-0445-2

Gislason, Magnus Kjartan and Stansfield, Benedict and Bransby-Zachary, Marc and Hems, Tim and Nash, David (2012) Load transfer through the radiocarpal joint and the effects of partial wrist arthrodesis on carpal bone behaviour : a finite element study. Journal of Hand Surgery (European Volume), 175319341. pp. 1-8. ISSN 1753-1934

Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2012) High Deborah-number flows around a confined cylinder. In: 17th International Workshop on Numerical Methods for Non-Newtonian Flows, IWNMNNF 2012, 2012-03-25 - 2012-03-28, Blois Castle.

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Mission analysis and systems design of a near-term and far-term pole-sitter mission. In: 1st IAA Conference on Dynamics and Control of Space Systems, 2012-03-19 - 2012-03-21, Porto.

XU, Ming and McInnes, Colin (2012) Constellation design for responsive revisiting. In: 1st IAA Conference on Dynamics and Control of Space Systems, 2012-03-19 - 2012-03-21, Porto.

Zuiani, Federico and Vasile, Massimiliano and Avanzini, Giulio and Palmas, Alessandro (2012) Direct transcription of low-thrust trajectories with finite trajectory elements. Acta Astronautica, 72. pp. 108-120. ISSN 0094-5765

Chacon-Nava, J.G. and Almeraya-Calderon, F. and Martinez-Villanfane, A. and Stack, Margaret (2012) Low impact velocity wastage in FBCs : experimental results and comparison between abrasion and erosion theories. In: Abrasion resistance of materials. In-Tech Open Publishers, Croatia. ISBN 9799533070369

Docherty, Stephanie and Macdonald, Malcolm (2012) Analytical sun synchronous low-thrust manoeuvres. Journal of Guidance, Control and Dynamics, 35 (2). pp. 681-686. ISSN 0731-5090

Hong, Jun and Johnstone, Cameron and Torriti, Jacopo and Leach, Matthew (2012) Discrete demand side control performance under dynamic building simulation : a heat pump application. Renewable Energy, 39 (1). pp. 85-95. ISSN 0960-1481

Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2012) NORSEWInD Data Report and Correction Data for Berlengas : NORSEWInD Report UoSNW026. [Report]

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2012) Synergistic approach of asteroid exploitation and planetary protection. Advances in Space Research, 49 (4). pp. 667-687. ISSN 0273-1177

Ceccaroni, Marta and Biggs, James and Biscani, Francesco (2012) Analytical perturbative theories of motion in highly inhomogeneous gravitational fields : Ariadna AO/1-6790/11/NL/CBI. [Report]

Dadzie, Kokou and Reese, Jason (2012) Spatial stochasticity and non-continuum effects in gas flows. Physics Letters A, 376 (8-9). pp. 967-972. ISSN 0375-9601

Anderson, Pamela and Macdonald, Malcolm (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: Spaceflight Mechanics 2012. Advances in Astronautical Sciences, 143 . Univelt Inc, pp. 2305-2324. ISBN 978-0-87703-581-7

Ceccaroni, Marta and Biggs, James (2012) Low thrust propulsion in a coplanar circular restricted four body problem. Celestial Mechanics and Dynamical Astronomy, 112 (2). pp. 191-219. ISSN 0923-2958

Heiligers, Jeannette and McInnes, Colin and Biggs, James and Ceriotti, Matteo (2012) Displaced geostationary orbits using hybrid low-thrust propulsion. Acta Astronautica, 71. pp. 51-67. ISSN 0094-5765

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2012) On shakedown, ratchet and limit analysis of defective pipeline. Journal of Pressure Vessel Technology, 134 (1). 011202. ISSN 0094-9930

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) On the ratchet analysis of a cracked welded pipe. Journal of Pressure Vessel Technology, 134 (1). 011203. ISSN 0094-9930

Rijal, H.B. and Tuohy, Paul Gerard and Humphreys, M.A. and Nicol, J.F. and Samuel, Aizaz Aamir (2012) Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings. Architectural Science Review, 55 (1). pp. 35-48. ISSN 0003-8628

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2012) High performance microfluidic rectifiers for viscoelastic fluid flow. RSC Advances, 2 (3). pp. 920-929. ISSN 2046-2069

Anderson, Pamela and Macdonald, Malcolm (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02, Charleston, South Carolina.

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2012) Design of optimal transfers between North and South Pole-sitter orbits. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02, Charleston, South Carolina.

Simo, Jules and McInnes, Colin (2012) Feedback stabilization of displaced periodic orbits : Application to binary asteroid. In: 22nd AAS/AIAA Spaceflight Mechanics Meeting, 2012-01-29 - 2012-02-02, Charleston, South Carolina.

Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. WEAR, 274-275. pp. 401-413. ISSN 0043-1648

Biggs, James and Bennet, Derek James and Dadzie, Kokou (2012) Time-delayed auto-synchronous swarm control. Physical Review E, 85. ISSN 1539-3755

An, Hongyan and Zhang, Chuhua and Meng, Jian-Ping and Zhang, Yonghao (2012) Analytical solution of axi-symmetrical lattice Boltzmann model for cylindrical Couette flows. Physica A: Statistical Mechanics and its Applications, 391 (1-2). pp. 8-14. ISSN 0378-4371

Shambuzzoha, A.H.M. and Grant, Andrew and Clarke, Joseph (2012) Implementation of renewable energy in Scottish rural area : A social study. Renewable and Sustainable Energy Reviews, 16 (1). pp. 185-191. ISSN 1364-0321

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. and Oliveira, Monica and Alves, M.A. (2012) Microfluidic systems for the analysis of the viscoelastic fluid flow phenomena in porous media : A review. Microfluidics and Nanofluidics, 12 (1-4). pp. 485-498. ISSN 1613-4982 (In Press)

Nicholls, William and Borg, Matthew Karl and Lockerby, D.A. and Reese, Jason (2012) Water transport through (7,7) carbon nanotubes of different lengths using molecular dynamics. Microfluidics and Nanofluidics, 12 (1-4). pp. 257-264. ISSN 1613-4982

Quail, Francis J. and Scanlon, T.J. and Baumgartner, A. (2012) Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques. European Journal of Mechanics - B/Fluids, 31. pp. 181-187. ISSN 0997-7546

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, B. (2012) Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Structures, 50 (1). pp. 76-86. ISSN 0263-8231

Wu, Lei and Zhang, Yonghao (2012) Numerical investigation of the radial quadrupole and scissors modes in trapped gases. EPL: A Letters Journal Exploring the Frontiers of Physics, 97. pp. 1-6. ISSN 0295-5075

Anderson, Pamela and Macdonald, Malcolm (2012) Static highly elliptical orbits using hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics. ISSN 0731-5090 (In Press)

Antoine, C. and Dumazer, G. and Nowakowski, B. and Lemarchand, A. (2012) Nonlinear hydrodynamic corrections to supersonic F-KPP wave fronts. Physica D: Nonlinear Phenomena, 241 (5). pp. 461-471. ISSN 0167-2789

BRODESSER, MONIKA and Pethrick, Richard and Banks, William (2012) Ageing of Thermoplastic Umbilical Hose Materials II – Nylon. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN 1464-4207 (In Press)

BRODESSER, MONIKA and Pethrick, Richard and Banks, William (2012) Ageing of Thermoplastic Umbilical Hose Materials Polyethylene (HDPE). Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN 1464-4207 (In Press)

Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick (2012) Future Needs for Tribo-Corrosion Research and Testing. In: Proc. Tribo-Corrosion 2012, 19-20 April, Atlanta, Georgia, US. ASTM International. (In Press)

Brindley, Joseph and Counsell, John and Zaher, Obadah Samir and Pearce, John G (2012) Design and simulation of a non-linear, discontinuous, flight control system using rate actuated inverse dynamics. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. ISSN 0954-4100

David-West, Opukuro and Nash, David and Banks, William (2012) Low velocity heavy mass impact response of singly curved composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN 1464-4207 (In Press)

Haward, S.J. and Ober, Thomas J. and Oliveira, Monica and Alves, M.A. and McKinley, G.H. (2012) Extensional rheology and elastic instabilities of a wormlike micellar solution in a microfluidic cross-slot device. Soft Matter, 8 (2). pp. 536-555. ISSN 1744-683X

Stack, Margaret and Crawley, Joshua and Miller, Mark (2012) An approach to mapping the erosion-corrosion of stainless steel : Applications to tidal energy systems. In: Proceedings of Tribo-Corrosion 2012. ASTM International. (In Press)

Stickland, Matthew (2012) International Standard IEC61400-12-1 : Wind Turbines-Part 12-1: Power performance measurements of electricity producing wind turbines: Annex G. International Electrical Commission, IEC.

Zuiani, Federico and Vasile, Massimiliano (2012) Preliminary design of debris removal missions by means of simplified models for low-thrust, many-revolution transfers. International Journal of Aerospace Engineering, 2012.

McPherson, Norman and Galloway, Alexander and Gillies, Andrew and Campbell, Stuart and Scanlon, Thomas and Moore, A.J. and Wu, T (2011) MIG gas shielding : Economic savings without detriment to quality. In: Annual International Conference on Materials Science, Metal & Manufacturing, M3 2011, 2011-12-12 - 2011-12-13, Singapore.

Macdonald, Malcolm and McInnes, Colin (2011) Solar sail science mission applications and advancement : solar sailing: concepts, technology, missions. Advances in Space Research, 48 (11). pp. 1702-1716. ISSN 0273-1177

Boyle, James (2011) The behavior of structures based on the characteristic strain model of creep. International Journal of Pressure Vessels and Piping, 88 (11-12). pp. 473-481. ISSN 0308-0161

Ceriotti, Matteo and McInnes, Colin (2011) Systems design of a hybrid sail pole-sitter. Advances in Space Research, 48 (11). pp. 1754-1762. ISSN 0273-1177

Stack, M.M. and Huang, W. and Wang, G. and Hodge, C. (2011) Some views on the construction of bio-tribo-corrosion maps for Ti in Hanks solution : Particle concentration and applied loads effects. Tribology International, 44 (12). pp. 1827-1837. ISSN 0301-679X

Suzuki, M. and Uchiyama, K. and Bennet, Derek James and McInnes, Colin (2011) Three-dimensional formation flight for UAV using bifurcating velocity field. Journal of the Japan Society of Aeronautical and Space Sciences, 59 (693). pp. 259-265.

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Comparison of Zephir and Windcube measurements in the same complex flowfield. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01, Amsterdam.

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Computational and Experimental Study on the effect of flow field distortion on the accuracy of the measurements made by anemometers on the Fino3 Meteorological mast. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01, Amsterdam.

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie (2011) Feasibility Study of using a LiDAR in the complex flowfield of an offshore platform, to measure wind shear profile. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01, Amsterdam.

Stickland, Matthew and Scanlon, Thomas and Fabre, Sylvie and Oldroyd, Andrew and Mikkelsen, T. (2011) Feasibility study for estimating the offshore shear layer from on shore measurements. In: EWEA Offshore 2011: Moving Ahead of the Energy Curve, 2011-11-29 - 2011-12-01, Amsterdam.

Tuohy, Paul Gerard and Murphy, Gavin Bruce and Cowie, Alison and Devici, Gokay and Theoboldt, Ingo (2011) POE + Monitoring including the 1st Scottish Passive House. In: UK Passivhaus Conference, 2011-11-24 - 2011-11-25, London.

Hand, Jon and Kim, Jae Min and Woo, Kyunghun (2011) Gaining confidence in models of experiments in existing buildings. In: Proceedings of Building Simulation 2011. International Building Performance Simulation Association.

Hand, Jon and Kim, Jae Min and Woo, Kyunghun (2011) Gaining confidence in models of experiments in existing buildings. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16, Sydney. (In Press)

Murphy, Gavin Bruce and Khalid, Yousaf Ali and Counsell, John (2011) A simplified dynamic systems approach for the energy rating of dwellings. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16, Sydney.

Murphy, Gavin Bruce and Samuel, Aizaz Aamir and Counsell, John (2011) Enhancement of the UK Standard Assessment Procedure (SAP) solar water heating prediction algorithm using parametric dynamical thermal simulations. In: Building Simulation 2011 Conference, BS2011, 2011-11-14 - 2011-11-16, Sydney.

Falcão, D.S. and Oliveira, V.B. and Oliveira, Monica and Rangel, C.M. and Pinto, A.M.F.R. (2011) Modelling and simulation of micro direct methanol fuel cells. In: Advances in Hydrogen Energy Technologies: Opportunities and Challenges in a Hydrogen Economy, 4th International Seminar, 2011-11-10 - 2011-11-11, Viana do Castelo.

Sasagawa, K and Coupaud, S. and Gislason, Magnus Kjartan and Tanner, E. and Tanabe, Y (2011) Modelling of a finite element mesh for the tibia of a spinal cord injured patient. In: Simpleware Users Meeting, 2011-11-09 - 2011-11-09, Bristol.

Alves, M.A. and Oliveira, Monica (2011) Microfluidic flows of non-Newtonian fluids. In: CFTC Seminar Series, Centro de Física Teórica e Computacional, University of Lisbon, 2011-11-08 - 2011-11-08, Lisbon.

Wood, James and Morris, Tim and Prinja, Nawal (2011) The development of a competence framework for engineering analysis and simulation. In: 21st International Conference on Structural Mechanics in Reactor Technology, 2011-11-06 - 2011-11-11, New Delhi.

Bennet, Derek James and McInnes, Colin and Suzuki, M. and Uchiyama, K. (2011) Autonomous three-dimensional formation flight for a swarm of unmanned aerial vehicles. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1899-1908. ISSN 0731-5090

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Flow of low viscosity Boger fluids through a microfluidic hyperbolic contraction. Journal of Non-Newtonian Fluid Mechanics, 166 (21-22). pp. 1286-1296. ISSN 0377-0257

Colombo, Camilla and McInnes, Colin (2011) Orbital dynamics of 'smart dust' devices with solar radiation pressure and drag. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1613-1631. ISSN 0731-5090

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2011) Displaced geostationary orbit design using hybrid sail propulsion. Journal of Guidance, Control and Dynamics, 34 (6). pp. 1852-1866. ISSN 0731-5090

Minisci, Edmondo and Vasile, Massimiliano and Liqiang, H. (2011) Robust multi-fidelity design of a micro re-entry unmanned space vehicle. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (11). pp. 1195-1209. ISSN 0954-4100

Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2011) Microfluidic flows in viscoelastic fluids. In: Mixing in Laminar Fluid Flows. Reviews of Nonlinear Dynamics and Complexity . Wiley-Blackwell, Berlin, Ch 6, 131-165. ISBN 978-3-527-41011-8

Scheurich, F. and Brown, Richard (2011) Effect of dynamic stall on the aerodynamics of vertical-axis wind turbines. AIAA Journal, 49 (11). pp. 2511-2521. ISSN 0001-1452

Schutze, O. and Lara, A. and Coello Coello, Carlos A. and Vasile, Massimiliano (2011) On the detection of nearly optimal solutios in the context of single-objective space mission design problems. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (11). pp. 1229-1242. ISSN 0954-4100

Stack, M.M. and Abdelrahman, M.S. (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. WEAR, 273 (1). pp. 38-42. ISSN 0043-1648

Vasile, Massimiliano and Zuiani, Federico (2011) Multi-agent collaborative search: an agent-based memetic multi-objective optimization algorithm applied to space trajectory design. Journal of Aerospace Engineering, 225 (11). pp. 1211-1227. ISSN 0893-1321

Stack, Margaret and Jana, Buddhadev and Abdelrahman, Shehab (2011) Models and mechanisms of erosion-corrosion in metals. In: Tribocorrosion of Passive Metals and Coatings. Tribocorrosion of Passive Metals and Coatings . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9781845699666

Yaginuma, T. and Rodrigues, R. and Pereira, P.J. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Yamaguchi, T. (2011) Flow of red blood cells through a microfluidic extensional device : an image analysis assessment. In: VIPIMAGE-III ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, 2011-10-12 - 2011-10-14, Olhão.

Afonso, A.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2011) Dynamics of high-Deborah -number flows around a confined cylinder. In: 83rd Annual Meeting of the Society of Rheology, 2011-10-09 - 2011-10-13, Cleveland, Ohio.

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupling continuum hydrodynamics and molecular dynamics for one-dimensional scale-separated channel flows. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07, Zaragoza.

Lockerby, Duncan A. and Duque Daza, C.A. and Borg, Matthew Karl and Reese, Jason (2011) Exploiting timescale separation in micro and nano flows. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07, Zaragoza.

Reese, Jason and Borg, Matthew Karl and Lockerby, Duncan A. (2011) Identifying non-continuum in gas flows for hybrid particle/fluid solvers. In: CECAM Workshop on Multiscale Modelling of Simple and Complex Liquid Flow Using Particle-Continuum Hybrids, 2011-10-05 - 2011-10-07, Zaragoza.

Bewick, Russell and Lucking, Charlotte and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Geo-engineering using dust grains in heliotropic elliptical orbits. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Use of orbiting reflectors to decrease the technological challenges of surviving the lunar night. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Ceccaroni, Marta and Biggs, James (2011) Nonlinearly stable equilibria in the Sun-Jupiter-Trojan-Spacecraft four body problem. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Ceriotti, Matteo and McInnes, Colin and Diedrich, Benjamin (2011) The pole-sitter mission concept : an overview of recent developments and possible future applications. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Colombo, Camilla and Lucking, Charlotte and McInnes, Colin (2011) Orbital dynamics of high area-to-mass ratio spacecraft under the influence of J2 and solar radiation pressure. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Gibbings, Alison and Komninou, Eirini and Vasile, Massimiliano (2011) Investigation and modelling of large scale cratering events : Lessons learnt from experimental analysis. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin and Biggs, James (2011) Design of optimal Earth pole-sitter transfers using low thrust propulsion. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Komninou, Eirini and Vasile, Massimiliano and Minisci, Edmondo (2011) Optimal power harness routing for small-scale satellites. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive satellite deorbiting strategy for MEO using solar radiation pressure and the J2 effect. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

McLean, Craig and Pagnozzi, Daniele and Biggs, James (2011) Computationally light attitude controls for resource limited nano-spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Owens, Steven Robert and Macdonald, Malcolm (2011) A novel approach to hybrid propulsion transfers. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Punzo, Giuliano (2011) Fractal patterns in fractionated spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm (2011) A fractally fractionated spacecraft. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) On the ballistic capture of asteroids for resource utilisation. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Sinn, Thomas and Vasile, Massimiliano (2011) Deployment simulation of very large inflatable tensegrity reflectors. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Van Der Weg, Willem Johan and Vasile, Massimiliano (2011) Contingency and recovery options for the European Student Moon Orbiter. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Vetrisano, Massimo and Vasile, Massimiliano (2011) Navigation and contingency analysis of the European Student Moon Orbiter. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Stack, M.M. and Mathew, M.T. and Hodge, C. (2011) Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : Approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism. Electrochimica Acta, 56 (24). pp. 8249-8259. ISSN 0013-4686

Avanzini, Giulio and Minisci, Edmondo (2011) Evolutionary design of a full-envelope full-authority flight control system for an unstable high-performance aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (10). pp. 1065-1080. ISSN 0954-4100

Campbell, Stuart William and Galloway, Alexander and McPherson, Norman (2011) Techno-economic evaluation on the effects of alternating shielding gases for advanced joining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (10). pp. 1863-1872. ISSN 0954-4054

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Hamilton, Niall Robert and Olsson Robbie, Mikael Brian and Wood, James and Galloway, Alexander and Katramados, Ioannis and Milnes, Joe (2011) The challenges in predicting the fatigue life of dissimilar brazed joints and initial finite element results for a tungsten to EUROFER97 steel brazed joint. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796

Li, Maodeng and Jing, Wuxing and Macdonald, Malcolm and McInnes, Colin (2011) Adaptive backstepping control for optimal descent with embedded autonomy. Aerospace Science and Technology, 15 (7). pp. 1396-1411. ISSN 1270-9638

Olsson Robbie, Mikael Brian and Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Milnes, J. and Katramados, I. (2011) Observations on the post-mortem investigation of electron beam welds and other micro-structural features of JET Hypervapotrons. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796

Vasile, Massimiliano (2011) Special issue on evolutionary computation in aerospace sciences : Guest Editorial. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (10). pp. 1063-1064. ISSN 0954-4100

Vasile, Massimiliano and Minisci, Edmondo and Zuiani, Federico and Komninou, Eirini and Wijnands, Quirien (2011) Fast evidence-based space system engineering. In: 62nd International Astronautical Congress 2011, 2011-10-03 - 2011-10-07, Cape Town,.

Yang, Liu and Thomason, James and Zhu, W.Z. (2011) The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene. Composites Part A: Applied Science and Manufacturing, 42 (10). pp. 1293-1300. ISSN 1359-835X

Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. In: Minimization of Welding Distortion and Buckling, Modelling and Implementation. Woodhead Publishing Ltd, pp. 124-165. ISBN 978-0-85709-290-8

Thomason, James and Gentles, Fiona and Carruthers, Jamie (2011) The challenges of natural fibres as an engineering composite reinforcement. In: 19th Bio-Environmental Polymer Society (BEPS) Annual Meeting, 2011-09-28 - 2011-09-30, Vienna.

White, Craig and Scanlon, Thomas and Reese, Jason (2011) Investigation of microchannels with bends using DSMC. In: DSMC11, 2011-09-26 - 2011-09-28, Santa Fe, New Mexico.

Ahmad, Abdul Ossman and Maddock, Christie and Scanlon, Thomas and Brown, Richard (2011) Prediction of the aerodynamic performance of re-usable single stage to orbit vehicles. In: Space Access 2011, 2011-09-21 - 2011-09-23, Paris.

Rumi, Emal and Jack, James W and Henry, David M and Woodhouse, I and Nichol, C and Macdonald, Malcolm (2011) The design of a Space-borne multispectral canopy LiDAR to estimate global carbon stock and gross primary productivity. In: Sensors, Systems & Next Generation Satellites. Sensors Systems & Next Generation Satellites, 8176 . SPIE--The International Society for Optical Engineering., Prague, Article 8176-61.

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2011) Laminar flow in three-dimensional square-square expansions. Journal of Non-Newtonian Fluid Mechanics, 166 (17-18). pp. 1033-1048. ISSN 0377-0257

Clarke, Joseph and Hong, Jun and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2011) The potential impact of policy and legislation on the energy demands of UK buildings and implications for the electrical network. In: The Future of Electricity Demand. Supergen Flexnet Book, Part IV P . Cambridge University Press, Cambridge, UK, 401, Chapter 16. ISBN 978-1-107-00850-2

Hong, Jun and Johnstone, Cameron and Kim, Jae Min and Tuohy, Paul Gerard (2011) Technology demand-side management and control in buildings. In: The Future of Electricity Demand. Supergen Flexnet Book, Part II, . Cambridge University Press, Cambridge, UK, 129, Chapter 5. ISBN 978-1-107-00850-2

Cavallero, Claudio and Chiarelli, Cosimo and Mareschi, Vincenzo and Davite, Alessio and Gallizio, Federico and Minisci, Edmondo and Sudars, Martins (2011) Multi-disciplinary shape optimization of an entry capsule integrated with custom neural network approximation and multi-delity approach. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16, Capua.

Minisci, Edmondo and Campobasso, S. and Dellantonio, M and Montecucco, A and Vasile, Massimiliano (2011) Multi-disciplinary robust design of variable speed wind turbines. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16, Capua.

Vasile, Massimiliano and Minisci, Edmondo (2011) An evolutionary approach to evidence-based multi-disciplinary robust design optimisation. In: Eurogen 2011 Conference, 2011-09-14 - 2011-11-16, Capua.

Zaher, Obadah Samir and Counsell, John and Brindley, Joseph (2011) Robust control of room temperature and relative humidity using advanced nonlinear inverse dynamics and evolutionary optimisation. In: Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems. CIRA, Italian Aerospace Research Centre, Capua, Italy.

Thomason, James and Yang, Liu (2011) Temperature dependence of the interfacial shear strength in glass–fibre polypropylene composites. Composites Science and Technology, 71 (13). pp. 1600-1605. ISSN 0266-3538

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Gel formation of low viscous Boger fluids under high shear and extensional strain rate flow conditions. In: Rheology Trends. UNSPECIFIED. ISBN 978-972-8669-50-8

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Numerical analysis of Microfluidic Systems Analogue of Porous Media (MSAPM) for Newtonian and low viscous Boger fluid flows. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09, Lisbon.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Numerical analysis of microfluidic systems analogue of porous media (MSAPM) for Newtonian and low viscous Boger fluids. In: Rheology Trends. UNSPECIFIED. ISBN 978-972-8669-50-8

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Microfluidic diodes for viscoelastic fluid flow. In: Rheology Trends. UNSPECIFIED. ISBN 978-972-8669-50-8

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Microfluidic diodes for viscoelastic fluid flow. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09, Lisbon.

Counsell, John and Khalid, Yousaf Ali (2011) Controllability of buildings : a multi-input multi-output stability assessment method for buildings with fast acting heating systems. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07, Leicester.

Johnston, James and Counsell, John and Strachan, Paul (2011) Trends in office internal gains and the impact on space heating and cooling demands. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07, Leicester.

Murphy, Gavin Bruce and Counsell, John (2011) Symbolic energy estimation model with optimum start algorithm implementation. In: CIBSE Technical Symposium 2011, 2011-09-06 - 2011-09-07, Leicester.

Johnstone, Cameron and Holmes, Brian and Myers, Luke and Mccombes, Tom and AbuBakr, Bahaj (2011) Equimar : development of best practices for the engineering performance appraisal of wave and tidal energy converters. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09, Southampton.

Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew (2011) Tow tank tests of tethered marine turbines to determine system dynamic response. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09, Southampton.

Rose, Samuel and Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Mccombes, Tom and Grant, Andrew and Lee, K.H. and Jo, C.H. (2011) Tidal turbine wakes : small scale experimental and initial computational modelling. In: 9th European Wave and Tidal Energy Conference, EWTEC 2011, 2011-09-05 - 2011-09-09, Southampton.

Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm (2011) Enhancing self-similar patterns by asymmetric artificial potential functions in partially connected swarms. In: Towards Autonomous Robotic Systems. Lecture Notes in Artificial Intelligence, 6856 (1st). Institution of Engineering and Technology. ISBN 978-3-642-23231-2

Gislason, Magnus Kjartan and Stansfield, Benedict and Nash, David (2011) Computational modelling of the wrist. In: Annual UK Hand & Wrist Network Meeting, 2011-09-01 - 2011-09-02, Glasgow.

Borg, Simon Paul and Kelly, Nicolas (2011) The effect of appliance energy efficiency improvements on domestic electric loads in European households. Energy and Buildings, 43 (9). pp. 2240-2250. ISSN 0378-7788

Ceriotti, Matteo and McInnes, Colin (2011) Hybrid solar sail and SEP propulsion for novel Earth observation missions. Acta Astronautica, 69 (9-10). pp. 809-821. ISSN 0094-5765

Liu, Haihu and Zhang, Yonghao (2011) Droplet formation in microfluidic cross-junctions. Physics of Fluids, 23 (8). ISSN 1070-6631

Macdonald, Malcolm and Mckay, Robert and Vasile, Massimiliano and Bosquillon de Frescheville, Francois and Biggs, James and McInnes, Colin (2011) Low-thrust enabled highly non-Keplerian orbits in support of future Mars exploration. Journal of Guidance, Control and Dynamics, 34 (5). pp. 1396-1411. ISSN 0731-5090

Pan, Wenke and Boyle, James and Ramlan, Mohd. and Dun, C. and Ismail, Mohd. and Hakoda, K. (2011) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane strain small punch test. Czech Metallurgican Journal, LXIII. pp. 174-179. ISSN None

Pan, Wenke and Wheel, Marcus (2011) A finite-volume method for solids with a rotational degree of freedom based on the 6-node triangle. International Journal for Numerical Methods in Biomedical Engineering, 27 (9). pp. 1411-1426. ISSN 2040-7939

Ratola, Nuno and Amigo, José Manuel and Oliveira, Monica and Araújo, Rita and Silva, José A. and Alves, Arminda (2011) Differences between Pinus pinea and Pinus pinaster as bioindicators of polycyclic aromatic hydrocarbons. Environmenal and Experimental Botany, 72 (2). pp. 339-347. ISSN 0098-8472

Seferis, P. and Strachan, Paul and Dimoudi, A. and Androutsopoulos, A. (2011) Investigation of the performance of a ventilated wall. Energy and Buildings, 43 (9). pp. 2167-2178. ISSN 0378-7788

Taylor, Ian and Robertson, Andrew Colin (2011) Numerical simulation of the airflow–rivulet interaction associated with the rain-wind induced vibration phenomenon. Journal of Wind Engineering and Industrial Aerodynamics, 99 (9). pp. 931-944. ISSN 0167-6105

Thomason, J. L. and Porteus, G. (2011) An investigation of glass–fiber reinforced polyamide 66 during conditioning in various automotive fluids. Polymer Composites, 32 (9). pp. 1369-1379. ISSN 0272-8397

Thomason, James and Porteus, G. (2011) An investigation of glass-fibre-reinforced polyamide 66 during conditioning in various automotive fluids. Polymer Composites, 32 (9). pp. 1369-1379. ISSN 0272-8397

Borg, Matthew Karl and Lockerby, Duncan A. and Reese, Jason (2011) Coupled continuum hydrodynamics and molecular dynamics method for multiscale simulation. In: 3rd Micro and Nano Flows Conference, MNF11, 2011-08-22 - 2011-08-24, Thessaloniki.

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2011) Boger fluid flow through hyperbolic contraction microchannels. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24, Thessaloniki.

Galindo-Rosales, Francisco J and Campo-Deaño, Laura and Oliveira, Monica and Alves, M.A. and Pinho, F.T. and van Bokhorst, E. and Hamersma, P.J. (2011) Microchannels analogues for the study of viscoelastic fluid flows through porous media. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24, Thessaloniki.

Lockerby, Duncan A. and Duque Daza, C.A. and Borg, Matthew Karl and Reese, Jason (2011) Exploiting timescale separation in micro and nano flows. In: 3rd Micro and Nano Flows Conference, MNF11, 2011-08-22 - 2011-08-24, Thessaloniki.

Oliveira, Monica and Pinho, F.T. (2011) Extensional flow of Newtonian and Boger fluids through a flow focusing microdevice. In: 3rd Conference on Micro & Nano Flows, MNF2011, 2011-08-22 - 2011-08-24, Thessaloniki.

Biggs, James (2011) Optimal path planning for nonholonomic robotics systems via parametric optimisation. In: Lecture Notes in Computer Science. Springer. ISBN 978-3-642-23231-2

Lucking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive high altitude deorbiting strategy. In: 25th Annual IAA/USU Conference on Small satellites, 2011-08-08 - 2011-08-11, Logan, Utah,.

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James (2011) On the shakedown analysis of welded pipes. International Journal of Pressure Vessels and Piping, 88 (8-9). pp. 301-310. ISSN 0308-0161

Tudor-Locke, Catrine and Craig, Cora L. and Brown, Wendy J. and Clemes, Stacy A. and De Cocker, Katrien and Giles-Corti, Billie and Hatano, Yoshiro and Inoue, Shigeru and Matsudo, Sandra M. and Mutrie, Nanette and Oppert, Jean-Michel and Rowe, David A. and Schmidt, Michael D. and Schofield, Grant M. and Spence, John C. and Teixeira, Pedro J. and Tully, Mark A. and Blair, Steven N. (2011) How many steps/day are enough? for adults. International Journal of Behavioral Nutrition and Physical Activity, 8 (79). ISSN 1479-5868

Trendafilova, Irina (2011) Vibration-based structural interrogation and health monitoring based on nonlinear signal analysis. In: 7th European Nonlinear Dynamics Conference, ENOC2011, 2011-07-24 - 2011-07-29, Rome.

Abid, M. and Khan, K.A. and Chatta, J.A. and Nash, David (2011) Leakage analysis of gasketed flange joints under combined internap pressure and thermal loading. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21, Baltimore, Maryland,.

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels & Piping Conference, PVP 2011, 2011-07-17 - 2011-07-21, Baltimore,.

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21, Baltimore, Maryland,.

Scanlon, Thomas and White, Craig and Schuebler, Matthias and Brown, Richard and Reese, Jason (2011) Thermochemistry modelling in an open-source DSMC code. In: 28th International Symposium on Shock Waves, 2011-07-17 - 2011-07-22, Manchester.

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2011) Incorporation of TiC particles on AlSi 4340 low alloy steel surfaces via tungsten inert gas melting. In: 14th international Conference on Advances in Materials and Processing Technologies, 2011-07-13 - 2011-07-16, Istanbul,.

Guechaichia, Abdelhamid and Trendafilova, Irina (2011) A simple method for enhanced vibration-based structural health monitoring. Journal of Physics Conference Series, 305 (1). ISSN 1742-6588

Trendafilova, Irina (2011) A method for vibration-based structural interrogation and health monitoring based on signal cross-correlation. Journal of Physics Conference Series, 305 (1). ISSN 1742-6588

Thomason, James and Carruthers, John (2011) Natural fibre cross sectional area, its variabiity and effects on the determination of fibre properties. In: ECOCOMP 2011, The 4th International Conference on Sustainable Materials, Polymers and Composites, 2011-07-06 - 2011-07-07, Birmingham,.

Ahmad, Abdul Ossman and Scanlon, Thomas and Reese, Jason (2011) Capturing shock waves using an open-source direct simulation Monte Carlo code. In: 4th European Conference for Aero-Space Sciences, EUCASS, 2011-07-04 - 2011-12-08, St Petersburg.

Scanlon, Thomas and Brown, Richard and Reese, Jason and White, Craig and Ahmad, Abdul Ossman and Schuebler, Matthias (2011) Chemistry modelling in an open-source DSMC code. In: 4th European Conference for Aero-Space Sciences, EUCASS, 2011-07-04 - 2011-12-08, St Petersburg.

Gislason, Magnus Kjartan and Nash, David (2011) Total wrist arthroplasty : A finite element study. In: 23rd Congress of the International Society of Biomechanics, 2011-07-03 - 2011-07-07, Brussels.

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Effect of circular holes on the ratchet limit and crack tip plastic strain range in a centre cracked plate. Engineering Fracture Mechanics, 78 (11). pp. 2310-2324. ISSN 0013-7944

David-West, O.S. and Banks, W.M. and Pethrick, R.A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 133-148. ISSN 1464-4207

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Modeling of Knudsen layer effects in micro/nanoscale gas flows. Journal of Fluids Engineering, 133 (7). ISSN 0098-2202

Ewing, Helen and Yang, S. (2011) The effect of precursor composition and sintering additives on the formation of ß-sialon from Al, Si and Al2O3 powders. Ceramics International, 37 (5). pp. 1667-1673. ISSN 0272-8842

Mackintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2011) Dynamic characteristics and processing of fillers in polyurethane elastomers for vibration damping applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 113-122. ISSN 1464-4207

McInnes, Colin (2011) Displaced non-Keplerian orbits using impulsive thrust. Celestial Mechanics and Dynamical Astronomy, 110 (3). pp. 199-215. ISSN 0923-2958

Mccombes, Tom and Johnstone, Cameron and Grant, Andrew (2011) Unsteady wake modelling for tidal current turbines. IET Renewable Power Generation, 5 (4). pp. 299-310. ISSN 1752-1416

Minisci, Edmondo and Vasile, Massimiliano (2011) Robust design of a re-entry unmanned space vehicle by multi-fidelity evolution control. In: Genetic and Evolutionary Computation Conference, 2005-06-25 - 2005-06-29, Washington.

Walker, C. (2011) A theoretical review of the operation of vibratory stress relief with particular reference to the stabilization of large-scale fabrications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (3). pp. 195-204. ISSN 1464-4207

Dadzie, Kokou and Reese, Jason (2011) Dissipative mass flux and sound wave propagations in monatomic gases. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, pp. 655-660. ISBN 9780735408890

Dongari, Nishanth and Dadzie, Kokou and Zhang, Yonghao and Reese, Jason (2011) Isothermal micro channel gas flow using a hydrodynamic model with dissipative mass flux. In: Rarefied gas dynamics. AIP Conference Proceedings, 1333 (1st). Springer, pp. 718-723. ISBN 9780735408890

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Behaviour of microscale gas flows based on a power-law free path distribution function. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 1333 (1st). Springer, pp. 724-729. ISBN 978-0-7354-0889-0

Zhivov, Alexander and Liesen, Richard and Fisher, Dan and Hand, Jon and Wilson, Barry (2011) Screening of energy efficient technologies for industrial buildings' retrofit. In: ASHRAE Transactions. Ashrae Transactions, 116 . American Society for Heating, Refrigerating and Air-Conditioning Engineers, ASHRAE, Albuquerque, NM, pp. 401-411.

Reese, Jason and Nicholls, William (2011) Perspectives on the simulation of micro gas and nano liquid flows. In: 9th ASME International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2011, 2011-06-19 - 2011-06-22, Edmonton.

Oliveira, Monica and Afonso, A.M. and Pinho, F.T. and Alves, M.A. (2011) High Deborah number flows through 3D contractions at the miccroscale. In: Lecture Massachusetts Institute of Technology, 2011-06-18 - 2011-06-18, Boston, Massachusetts.

Oliveira, Monica and Afonso, A.M. and Pinho, F.T. and Alves, M.A. (2011) High Deborah number flows through 3D contractions at the microscale. In: Proceedings of Microtech Conference and Expo 2011. UNSPECIFIED.

Yaginuma, T. and Oliveira, Monica and Lima, Rui and Ishikawa, T. and Yamaguchi, T. (2011) Red blood cell deformation in flows through a PDMS hyperbolic microchannel. In: Proceedings of Microtech Conference & Expo 2011. UNSPECIFIED, Boston, Massachusetts, p. 505.

Nicholls, William and Borg, Matthew Karl and Reese, Jason (2011) Simulating the fast transport of water through carbon nanotubes. In: 14th NSTL Nanotech Conference, 2011-06-13 - 2011-06-16, Boston, Massachusetts.

Ure, James Michael and Chen, Haofeng and Chen, Weihang and Li, Tianbai and Tipping, James and Mackenzie, Donald (2011) A direct method for the evaluation of lower and upper bound ratchet limits. In: 11th International Conference on Mechanical Behaviour of Materials, 2011-06-05 - 2011-06-09, Lake Como,.

Lima, Rui and Oliveira, Monica and Yaginuma, T. and Ishikawa, T. and Imai, Y and Yamaguchi, T. (2011) Development of a microfluidic device for partial cell separation. In: Proceedings of the Japan-Portugal Nano-Biomedical Engineering (BME) Symposium 2011. UNSPECIFIED, Portugal. ISBN 9781424441280

Pinho, F.T. and Lima, Rui and Alves, M.A. and Oliveira, Monica (2011) Transport Phenomena Research Center (CEFT) : Research complex flows of complex fluids. In: Japan-Portugal Nano-Biomedical Engineering Symposium 2011, BME2011, 2011-06-03 - 2011-06-06, Porto & Bragança.

Sousa, P.C. and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Flow of a blood analogue solution through microchannels with bifurcations. In: Proceedings of the Japan-Portugal Nano-Biomedical Engineering (BME) Symposium 2011. UNSPECIFIED, Portugal. ISBN 9781424441280

Fico, Vincenzo and Emerson, David and Reese, Jason (2011) A parallel compact-TVD method for compressible fluid dynamics employing shared and distributed-memory paradigms. Computers and Fluids, 45 (1). pp. 172-176. ISSN 0045-7930

Reese, Jason (2011) Water, water, everywhere, Nor any drop to drink? Physics World, 24 (6). pp. 28-32. ISSN 0953-8585

Rijal, H.B. and Tuohy, Paul Gerard and Humphreys, M.A. and Nicol, F. and Samuel, Aizaz Aamir (2011) An algorithm to represent occupant use of windows and fans including situation-specific motivations and constraints. Building Simulation, 4 (2). pp. 117-134. ISSN 1996-3599

Lees, Andrew and Wood, James (2011) Skills development and recoding in engineering analysis and simulation : Industry needs. In: NAFEMS World Congress, NWC2011, 2011-05-23 - 2011-05-26, Boston, Massachusetts.

Gibbings, Alison and Hopkins, John-Mark and Burns, David and Vasile, Massimiliano (2011) On testing laser ablation processes for asteroid deflection. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12, Bucharest,.

Gibbings, Alison and Vasile, Massimiliano (2011) Impact cratering experiments into highly porous bodies. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12, Bucharest,.

Sanchez Cuartielles, Joan-Pau and Colombo, Camilla and McInnes, Colin (2011) Planetary protection efficiency by a small kinetic impactor. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12, Bucharest,.

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Asteroid deflection and exploitation : possible synergies. In: IAA Planetary Defense Conference, Protecting Earth from Asteroids: From threat to Action, 2011-05-09 - 2011-05-12, Bucharest,.

Thomason, James and Carruthers, John and Kelly, James and Johnston, Gerard (2011) Fibre cross-section determination and variability in sisal and flax and its effects on fibre performance characterisation. Composites Science and Technology, 71 (7). pp. 1008-1015. ISSN 0266-3538

Liu, Haihu and Zhang, Yonghao (2011) Lattice Boltzmann simulation of droplet generation in a microfluidic cross-junction. Communications in Computational Physics, 9 (5). pp. 1235-1256. ISSN 1815-2406

Arbon, Ian and Brown, Colin and Fox, Tim and Knox, Andrew and Quail, Francis (2011) Scottish Energy 2020? [Report]

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). 041201. ISSN 0094-9930

Ceriotti, Matteo and McInnes, Colin (2011) Generation of optimal trajectories for Earth hybrid pole sitters. Journal of Guidance, Control and Dynamics, 34 (3). pp. 847-859. ISSN 0731-5090

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and MacKenzie, Donald (2011) Shakedown and limit analysis of 90º pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

Dales, Richard and Mclaren, Andrew and Steiner, Simon (2011) Teaching International Students (TIS) : An Engineering Perspective with a Focus on Group and Project-Based Work. Engineering Subject Centre Report . Higher Education Academy, Loughborough, UK. ISBN 978-1-907632-14-3

Dongari, N. (2011) Liquid slip/stick over hydrophobic/hydrophilic surfaces and their implications in coating processes. Chemical Engineering and Processing: Process Intensification, 50 (5-6). pp. 450-453. ISSN 0255-2701

Dunlop, M. W. and Bingham, R. and Chapman, S. and Escoubet, P. and Zhang, Q-H. and Shen, C. and Shi, J-K and Trines, R. and Wicks, R. and Pu, Z-Y. and de-Keyser, J. and Schwartz, S. and Liu, Z-X (2011) Use of multi-point analysis and modelling to address cross-scale coupling in space plasmas : lessons from cluster. Planetary and Space Science, 59 (7 spec). pp. 630-638. ISSN 0032-0633

Kelly, Mary E. and Brown, Richard (2011) Influence of blade aerodynamic model on prediction of helicopter rotor aeroacoustic signatures. Journal of Aircraft, 48 (3). pp. 1058-1083. ISSN 0021-8669

Li, Y. and Milbourn, D. and Baker, Thomas (2011) Effect of Vanadium microalloying on the HAZ microstructure and properties of low carbon steels. Journal of Iron and Steel Research International, 18 (Supple). pp. 393-403. ISSN 1006-706X

Macdonald, M. and Don, M. A. H. and Kotelko, M. and Rhodes, J. (2011) Web crippling behaviour of thin-walled lipped channel beams. Thin-Walled Structures, 49 (5). pp. 682-690. ISSN 0263-8231

Mckay, Robert and Macdonald, Malcolm and Biggs, James and McInnes, Colin (2011) Survey of highly non-Keplerian orbits with low-thrust propulsion. Journal of Guidance, Control and Dynamics, 34 (3). pp. 645-666. ISSN 0731-5090

Scheurich, F. and Fletcher, Timothy M. and Brown, Richard (2011) Effect of blade geometry on the aerodynamic loads produced by vertical-axis wind turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (3). pp. 327-341. ISSN 0957-6509

Quail, Francis and Stickland, M.T. and Baumgartner, A. (2011) A one-dimensional numerical model for the momentum exchange in regenerative pumps. Journal of Engineering for Gas Turbines and Power, 133 (9). Article 093001. ISSN 0742-4795

Gentles, Fiona Lamont and Thomason, James (2011) Determination of the fibre content of natural fibre composites through moisture absorption. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12, Cambridge.

Thomason, James and Gentles, Fiona Lamont and Carruthers, John (2011) Natural fibre reinforced epoxy composites : determination of fibre volume fraction, fibre mechanical properties and fibre cross-section variability. In: 11th Deformation and Fracture of Composites Conference (DFC11), 2011-04-12 - 2011-04-12, Cambridge.

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2011) Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests. In: 19th Conference of the Association for Computational Mechanics in Engineering, ACME 2011, 2011-04-05 - 2011-04-06, Edinburgh,.

Borg, Simon Paul and Kelly, Nicolas and Markopoulos, Anastasios and Strachan, Paul and Porteous, C. and Sharpe, T. (2011) Communal residential laundry washing and drying : Can it provide demand-side electrical load flexibility? In: 2nd International Conference in Microgeneration and Related Technologies, Glasgow April 4-6 2011, 2011-03-31.

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Shakedown analysis of a composite cylinder with a cross-hole. Journal of Pressure Vessel Technology, 133 (3). Article 031206. ISSN 0094-9930

Clarke, Joseph and Hong, Jun and Johnstone, Cameron and Kelly, Nicolas (2011) The implementation of discrete demand management algorithms within energy systems modelling. In: 2nd International Conference in Microgeneration and Related Technologies, Glasgow April 4-6 2011, 2011-03-31.

Counsell, John and Stewart, Matt John and Logan, Rufus (2011) A novel energy management philosophy for building integrated renewable systems. In: 2nd International Conference in Microgeneration and Related Technologies, Glasgow April 4-6 2011, 2011-03-31.

Kelly, Nicolas and Hong, Jun and Richardson, Ian and Thomson, Murray (2011) The influence of thermal storage on microgeneration flexibility. In: Proceedings of the 2nd International Conference in Microgeneration Technologies, 2011-04-04 - 2011-04-06, Glasgow.

Lira, Lucas and Kelly, Nicolas and Cooper, Catherine and Duncan, Douglas (2011) Impact of residential energy system sizing and control over heat pump’s system cost and reliability. In: 2nd International Conference in Microgeneration and Related Technologies, Glasgow April 4-6 2011, 2011-03-31.

Lücking, Charlotte and Colombo, Camilla and McInnes, Colin (2011) A passive de-orbiting strategy for high altitude CubeSat missions using a deployable reflective balloon. In: 8th IAA Symposium on Small Satellites, 2011-04-04 - 2011-04-08, Berlin.

Meng, Jian-Ping and Zhang, Yonghao and Shan, Xiaowen (2011) Multiscale lattice Boltzmann approach to modeling gas flows. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 83 (4). 046701. ISSN 1063-651X

Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207

Counsell, John M. and Khalid, Yousaf A. and Brindley, Joseph (2011) Controllability of buildings: A multi-input multi-output stability assessment method for buildings with slow acting heating systems. Simulation Modelling Practice and Theory, 19 (4). pp. 1185-1200. ISSN 1569-190X

Galloway, Alexander and McPherson, Norman and Gillies, Andrew (2011) Helium additions to MIG shielding gas - an economic option? Welding and Cutting, 10 (2). pp. 118-121. ISSN 1612-3433

Henderson, Emma and Nash, David and Dempster, William (2011) On the experimental testing of fine Nitinol wires for medical devices. Journal of the Mechanical Behavior of Biomedical Materials, 4 (3). pp. 261-268. ISSN 1751-6161

Holmes, Brian and O'Conner, Michael and Neumann, Frank and Frigaard, Peter and Kofoed, Jens Peter and Pecher, Arthur and Margarheritini, Lucia and Myers, Luke and Bahaj, AbuBakr and Gardner, Fred E. and Prado, Miguel and Soerensen, Hans Christian and Retzler, Chris and Bittencourt, Claudio and Flinn, Jonathan and Johnstone, Cameron and Mccombes, Tom (2011) Sea trials. In: Protocols of the Equitable Assessment of Marine Energy Converters. University of Edinburgh, Edinburgh, pp. 187-226. ISBN 978-0-9508920-1-6

Marinosci, C. and Strachan, Paul and Semprini, G. and Morini, G.L. (2011) Empirical validation and modelling of a naturally ventilated rainscreen facade building. Energy and Buildings, 43 (4). pp. 853-863. ISSN 0378-7788

Mccombes, Tom and Johnstone, Cameron and Grant, Andrew and Holmes, Brian and Barrett, Sean and Kofoed, Jens Peter and Myers, Luke and AbuBakr, Bahaj and Heller, Valentin and Bittencourt, Claudio (2011) Tank testing. In: Protocols for the Equitable Assessment of Marine Energy Converters. University of Edinburgh, Edinburgh, UK, 145-186, Chapter IIA. ISBN 978-0-9508920-1-6

Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2011) Fluent User Defined Function: Zephir_comp_sim : NORSEWInD Report UoSNW017. [Report]

Thomason, James and Porteus, G. (2011) Swelling of glass-fibre reinforced Polyamide 66 during conditioning in water, ethylene glycol and antifreeze mixture. Polymer Composites, 32 (4). pp. 639-647. ISSN 0272-8397

Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2011) An inflationary differential evolution algorithm for space trajectory optimization. IEEE Transactions on Evolutionary Computation, 15 (2). pp. 267-281. ISSN 1089-778X

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2011) Molecular free path distribution in rarefied gases. Journal of Physics D: Applied Physics, 44 (12). Article 125502. ISSN 0022-3727

Carus, David and Hamilton, Robert (2011) Training shoe will improve mobility in elderly people. The Scotsman.

McInnes, Colin and Ceriotti, Matteo and Colombo, Camilla and Sanchez Cuartielles, Joan-Pau and Bewick, Russell and Heiligers, Jeannette and Lucking, Charlotte (2011) Micro-to-Macro : astrodynamics at extremes of length-scale. Acta Futura, 4. pp. 81-97.

Scheurich, Frank and Brown, Richard (2011) Vertical-axis wind turbines in oblique flow: sensitivity to rotor geometry. In: EWEA Annual event (formerly known as EWEC), 2011-03-14 - 2011-03-17, Brussels.

Meng, Jian-Ping and Zhang, Yonghao (2011) Gauss-Hermite quadratures and accuracy of lattice Boltzmann models for non-equilibrium gas flows. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 83 (3). Article 036704. ISSN 1063-651X

Jana, B. and Stack, M.M. (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. WEAR, 270 (7-8). pp. 439-445. ISSN 0043-1648

Murphy, Gavin B. and Kummert, M. and Anderson, B.R. and Counsell, John M. (2011) A comparison of the UK standard assessment procedure (SAP) and detailled simulation of solar energy systems for dwellings. Journal of Building Performance Simulation, 4 (1). pp. 75-90. ISSN 1940-1493

Murray, Michael and Forbes, Doug and Mason, Steve (2011) Considerate constructors scheme : Glenfarg water treatment works. Proceedings of the ICE - Engineering Sustainability, 164 (1). pp. 49-57. ISSN 1478-4629

Avanzini, Giulio and Bernardo, L. and Giuletti, F. and Minisci, Edmondo (2011) Optimal rotation sequences in presence of constraints on admissable rotation axes. Journal of Guidance, Control and Dynamics, 34 (2). pp. 554-563. ISSN 0731-5090

Kelly, Mary E. and Brown, Richard (2011) Influence of blade aerodynamic model on the prediction of helicopter high-frequency airloads. Journal of Aircraft, 48 (2). pp. 476-494. ISSN 0021-8669

Scheurich, Frank and Fletcher, Timothy M. and Brown, Richard (2011) Simulating the aerodynamic performance and wake dynamics of a vertical-axis wind turbine. Wind Energy, 14 (2). pp. 159-177. ISSN 1095-4244

Schütze, Oliver and Vasile, Massimiliano and Coello Coello, Carlos A. (2011) Computing the set of Epsilon-efficient solutions in multiobjective space mission design. Journal of Aerospace Computing, Information, and Communication, 8 (3). pp. 53-70. ISSN 1542-9423

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Effect of the contraction ratio upon viscoelastic fluid flow in three-dimensional square-square contractions. Chemical Engineering Science, 66 (5). pp. 998-1009. ISSN 0009-2509

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Extensional flow of blood analogue solutions in microfluidic devices. Biomicrofluidics, 5 (1). ISSN 1932-1058

Meng, Jian-Ping and Zhang, Yonghao (2011) Accuracy analysis of high-order lattice Boltzmann models for rarefied gas flows. Journal of Computational Physics, 230 (3). pp. 835-849. ISSN 0021-9991

Anderson, Pamela and Macdonald, Malcolm (2011) Extension of the Molniya orbit using low-thrust propulsion. In: Spaceflight Mechanics 2011. Advances in the Astronautical Sciences, 140, Part . Univelt Inc, pp. 1943-1962. ISBN 978-0-87703-569-5

Macdonald, Malcolm (2011) Solar Sailing: applications and technology advancement. In: Advances in Spacecraft Technologies. InTech, Chapter 2. ISBN 978-953-307-551-8

Madhlopa, Amos and Johnstone, Cameron (2011) Computation of solar radiation distribution in a solar still with internal and external reflectors. Solar Energy, 85 (2). pp. 217-233. ISSN 0038-092X

Phillips, Catriona and Kim, Hyo Won and Brown, Richard (2011) Helicopter brownout - can it be modelled? Aeronautical Journal, 115 (1164). pp. 123-133. ISSN 0001-9240

Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2011) Fluent User Defined Function: WindCube_comp_sim : NORSEWInD Report UOSNW013. [Report]

Clarke, Joseph and Bradley, Fiona and Nugent, Karen (2011) Embedding Simplified Post Occupancy Evaluation Within The Design Process. In: CIC Start Online: Webinar 1 - Embedding Simplified Post Occupancy Evaluation within the Design Process, 2011-01-25 - 2011-01-25, Glasgow. (Unpublished)

Abid, M. and Nash, David and Parvez, Shahid and Fawad, H. (2011) Simulation of stationary GTAW process using argon as shielding gas : effect of electrode angle and tip angles in butt welding. In: 8th International Bhurban Conference on Applied Science and Technology, IBCAST08, 2011-01-10 - 2011-01-13, Islamabad.

Kelly, N.J. and Cockroft, J. (2011) Analysis of retrofit air source heat pump performance : results from detailed simulations and comparison to field trial data. Energy and Buildings, 43 (1). pp. 239-245. ISSN 0378-7788

Novak, D.M. and Vasile, Massimiliano (2011) Improved shaping approach to the preliminary design of low-thrust trajectories. Journal of Guidance, Control and Dynamics, 34 (1). pp. 128-147. ISSN 0731-5090

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2011) Asteroid resource map for near-Earth space. Journal of Spacecraft and Rockets, 48 (1). pp. 153-165. ISSN 0022-4650

Biggs, J.D. and Waters, T. and McInnes, C.R. (2011) New periodic orbits in the solar sail three-body problem. In: Nonlinear Science and Complexity. Springer, pp. 131-138. ISBN 9789048198832

Kuhn, Tilmann and Herkel, Sebastian and Frontini, Francesco and Strachan, Paul and Kokogiannakis, Georgios (2011) Solar control : a general method for modelling of solar gains through complex facades in building simulation. Energy and Buildings, 43 (1). pp. 19-27. ISSN 0378-7788

Quail, Francis and Scanlon, T.J. and Stickland, M.T. (2011) Design optimisation of a regenerative pump using numerical and experimental techniques. International Journal of Numerical Methods for Heat and Fluid Flow, 21 (1). pp. 95-111. ISSN 0961-5539

Tian, Qing and Wu, Lei and Zhang, J. F. and Malomed, B. A. and Mihalache, D. and Liu, W. M. (2011) Exact soliton solutions and their stability control in the nonlinear Schrodinger equation with spatiotemporally modulated nonlinearity. Physical Review E, 83 (1). ISSN 1539-3755

Campo-Deaño, Laura and Galindo-Rosales, Francisco J and Pinho, F.T. and Alves, M.A. and Oliveira, Monica (2011) Gel formation of low viscous Boger fluids under high shear and extensional strain rate flow conditions. In: 3rd Iberian Rheology Meeting, Ibereo2011, 2011-09-07 - 2011-09-09, Lisbon.

Dongari, N. and Zhang, Y. H. and Reese, J. M. (2011) The importance of mean free path in determining gas micro flow behaviour. In: Proceedings of the 8th International Conference on Nanochannels, Microchannels and Minichannels 2010. American Society of Mechanical Engineers, New York, pp. 481-490. ISBN 9780791854501

Ewing, Helen and Yang, S. (2011) The effect of sintering parameters on the formation of ß-sialon from Al, Si and Al2O3 powders. Journal of Ceramic Processing Research. ISSN 1229-9162 (In Press)

Fallani, Matteo and Amarri, Sergio and Uusijarvi, Agneta and Adam, Rüdiger and Khanna, Sheila and Aguilera, Marga and Gil, Angel and Vieites, Jose M and Norin, Elisabeth and Young, David and Scott, Jane A and Doré, Joël and Edwards, Christine A and , the INFABIO team (2011) Determinants of the human infant intestinal microbiota after the introduction of first complementary foods in infant samples from five European centres. Microbiology, 157 (Pt 5). pp. 1385-1392.

Frame, Jamie Campbell and Wheel, Marcus and Riches, Philip (2011) The micropolar properties of bone. In: 1st International Symposium on Numerical Simulation in Orthopaedic Biomechanics (SimOrtho), 2011-08-26 - 2011-08-27, Rostock.

Simo, Jules and McInnes, Colin (2011) Solar sail orbits at the Earth-Moon libration points. In: Nonlinear Science and Complexity. Springer, pp. 147-155. ISBN 978-90-481-9883-2

Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Flow of a blood analogue solution through microfabricated hyperbolic contractions. In: Computational Vision and Medical Image Processing. Computational Methods in Applied Sciences, 19 (1st). Springer London, London, Ch 15 pp 265-279. ISBN 978-94-007-0010-9

Mathew, M.T. and Ariza, E. and Rocha, L.A. and Vaz, F. and Fernandes, A.C. and Stack, M.M. (2010) Tribo-Corrosion behaviour of TiCxOy thin films in bio fluids. Electrochimica Acta, 56 (2). pp. 929-937. ISSN 0013-4686

Liu, H. and Zhang, Y.H. (2010) Phase-field modeling droplet dynamics with soluble surfactants. Journal of Computational Physics, 229 (24). pp. 9166-9187. ISSN 0021-9991

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) Molecular dynamics studies of anomalous transport in rarefied gas flows. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10, Toulouse,.

White, Craig and Borg, Matthew Karl and Reese, Jason (2010) A controller method of DSMC gas micro-channel flow simulations. In: 2nd European Conference on Microfluidics, 2010-12-08 - 2010-12-10, Toulouse,.

Abid, M. and Awan, A.W. and Nash, David (2010) Performance of a nongasketed flange joint combined internal pressure and bending loading. Journal of Engineering Mechanics, 136 (12). pp. 1519-1527.

Ceriotti, M. and Vasile, M. (2010) MGA trajectory planning with an ACO-inspired algorithm. Acta Astronautica, 67 (9-10). pp. 1202-1217. ISSN 0094-5765

Chen, Haofeng (2010) Linear matching method for design limits in plasticity. Computers, Materials and Continua - Tech Science Press, 20 (2). pp. 159-183. ISSN 1546-2218

Fabre, Sylvie and Scanlon, Thomas and Stickland, Matthew and Oldroyd, Andrew (2010) An open source CFD study of air flow over complex terrain. Wind Energy, 39 (10). pp. 2078-2089. ISSN 1095-4244

Hamilton, Robert and Mackenzie, Donald and Li, Hongjun (2010) Multi-physics simulation of friction stir welding process. Engineering Computations, 27 (8). pp. 967-985. ISSN 0264-4401

Hodge, C. and Stack, M.M. (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. WEAR, 270 (1-2). pp. 104-114. ISSN 0043-1648

Pan, Wenke and Wheel, Marcus and Qin, Yi (2010) A six-node triangle finite volume method for solids with a rotational degree of freedom. Computers and Structures, 88 (23-24). pp. 1506-1511. ISSN 0045-7949

Scanlon, T.J. and Roohi, E. and White, C. and Darbandi, M. and Reese, J.M. (2010) An open source, parallel DSMC code for rarefied gas flows in arbitrary geometries. Computers and Fluids, 39 (10). pp. 2078-2089. ISSN 0045-7930

Stack, M.M. and Abdelrahman, M.S. and Jana, B. (2010) Some perspectives on modelling the effect of temperature on the erosion-corrosion of Fe in aqueous conditions. Tribology International, 43 (12). pp. 2279-2297. ISSN 0301679X

Stack, M.M. and Hong, Ting-Fu and Wang, Hsin-Chun and Wang, Moo-Chin and Li, Wang-Long (2010) On the construction of wear maps for Y-TZP dental ceramics in aqueous environments: pH, exposure time and impact angle effects. Tribology International, 43 (12). pp. 2258-2267. ISSN 0301-679X

Colombo, C. and Lucking, Charlotte and McInnes, C.R. (2010) Orbit evolution, maintenance and disposal of SpaceChip swarms. In: 6th International Workshop on Satellite Constellation andFormation Flying, IWSCFF 2010, 2010-01-01 - 2010-01-03, Taipei, Taiwan.

Clarke, Joseph and Connor, Gary and Grant, Andrew and Johnstone, Cameron and Ordonez Sanchez, Stephanie Eugenia (2010) Analysis of a single point tensioned mooring system for station keeping of a contra-rotating marine current turbine. IET Renewable Power Generation, 4 (6). pp. 473-487. ISSN 1752-1416

Fletcher, Timothy M. and Brown, Richard (2010) Helicopter tail rotor thrust and main rotor wake coupling in crosswind flight. Journal of Aircraft, 47 (6). pp. 2136-2148. ISSN 0021-8669

Li, Maodeng and Macdonald, M. and McInnes, C.R. and Jing, Wuxing (2010) Analytical landing trajectories for embedded autonomy. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224 (11). pp. 1177-1191. ISSN 0954-4100

Macdonald, M. and McKay, R.J. and Vasile, M. and Bosquillon de Frescheville, Francois (2010) Extension of the sun-synchronous Orbit. Journal of Guidance, Control and Dynamics, 33 (6). pp. 1935-1940. ISSN 0731-5090

Minak, Giangiacomo and Palazzetti, Roberto and Trendafilova, I. and Zucchelli, Andrea (2010) Localization of a delamination and estimation of its length in a composite laminate beam by the VSHM and pattern recognition methods. Mechanics of Composite Materials, 46 (4). pp. 387-394. ISSN 0191-5665

Staffell, Iain and Baker, Philip and Barton, John P and Bergman, Noam and Blanchard, Richard and Brandon, Nigel P and Brett, Daniel J L and Hawkes, Adam and Infield, David and Jardine, Christian N and Kelly, Nicolas and Leach, Matthew and Matian, Mardit and Peacock, Andrew D and Sudtharalingam, Sohasini and Woodman, Bridget (2010) UK microgeneration. Part II : technology overviews. Proceedings of the ICE - Energy, 163 (4). pp. 143-165. ISSN 1751-4223

Neilson, Robbie and Wood, J. and Hamilton, R. and Li, H. (2010) A comparison of plastic collapse and limit loads for single mitred bends under in-plane bending. International Journal of Pressure Vessels and Piping, 87 (10). pp. 550-558. ISSN 0308-0161

Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16, Venice, Italy.

Stack, M.M. and Abdelrahman, M.S. and Jana, B. (2010) A CFD model of erosion-corrosion of Fe at elevated temperatures in aqueous environments. Advances in Science and Technology (72). pp. 75-86. ISSN 1662-8969

Johnstone, Cameron and Holmes, Brian and AbuBakr, Bahaj (2010) The need for performance appraisal procedures for ocean energy converters. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08, Bilbao.

Johnstone, Cameron and Pratt, D. and Clarke, Joseph and Grant, Andrew (2010) The need for tidal energy to be cost competitive with offshore wind power. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08, Bilbao.

Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew (2010) Contra rotating marine turbines tank tests to analyse system dynamic response. In: International Conference on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08, Bilbao.

Cattani, C. and Seyraman, A. and Trendafilova, Irina (2010) Nonlinear vibrations, stability, analysis and control. Mathematical Problems in Engineering, 3. Article 873047. ISSN 1024-123X

Fletcher, Timothy M. and Brown, Richard (2010) Simulation of wind turbine wake interaction using the vorticity transport model. Wind Energy, 13 (7). pp. 587-602. ISSN 1095-4244

Meng, J. and Zhang, Y.H. (2010) Analytical Solution for the Lattice Boltzmann Model Beyond Naviers-Stokes. Advances in Applied Mathematics and Mechanics, 2 (5). pp. 670-676. ISSN 2070-0733

Vasile, M. and Ceriotti, M. (2010) Incremental techniques for global space trajectory design. In: Spacecraft Trajectory Optimization. Cambridge Aerospace Series, Chapter 8 . Cambridge University Press, Cambridge, UK. ISBN 9780521518505

Anderson, Pamela and Macdonald, M. (2010) Extension of earth orbits using low-thrust propulsion. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Bewick, R. and Sanchez, J.P. and McInnes, C.R. (2010) An L1 positioned dust cloud as an effective method of space-based geoengineering. In: International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Ceccaroni, M. and Biggs, J.D. (2010) Extension of low-thrust propulsion to the autonomous coplanar circular restricted four body problem with application to future Trojan Asteroid missions. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Ceriotti, M. and McInnes, C.R. (2010) Hybrid solar sail and SEP propulsion for novel Earth observation missions. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Colombo, C. and McInnes, C.R. (2010) Orbit design for future SpaceChip swarm missions. In: 61st Aeronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Heiligers, J. (2010) Displaced geostationary orbits using hybrid low-thrust propulsion. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Lucking, Charlotte and Colombo, C. and McInnes, C.R. (2010) Orbit control of high area-to-mass ratio spacecraft using electrochromic coating. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Novac, Daniel and Vasile, Massimiliano (2010) Incremental solution of LTMGA transfers transcribed with an advanced shaping approach. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Parvez, Shahid and Abid, M. and Fawad, H. and Nash, David (2010) The effect of electrode tip angle on arc and anode temperature in GTAW. In: 7th Jordanian International Mechanical Engineering Conference, JIMEC'7, 2010-09-27 - 2010-09-29, Amman.

Sanchez, J.P. and McInnes, C.R. (2010) Assessment on the feasibility of future shepherding of asteroid resources. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Vasile, Massimiliano and Cartmell, M. and Dejene, F.Z. and Drysdale, T. and Flores, M.A. and Gulzar, M.Y. and Ismail, N. and Khalid, M.U. and Li, M. and Maddock, Christie and Mallol, P. and Mathieson, A. and McRobb, M. and Öberg, J. and Reynolds, P. and Ritterbusch, R. and Sandqvist, W. and Summerer, L. and Tanveer, M.U. and Tibert, G. and Whyte, G. and Zafar, W. and Zhang, J. (2010) The Suaineadh Project : A stepping stone towards the deployment of large flexible structures in space. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Vasile, Massimiliano and Maddock, Christie and Saunders, C. (2010) Orbital debris removal with solar concentrators. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Vasile, Massimiliano and Summerer, Leopold (2010) Multi-objective optimisation of integrated space-based and terrestrial solar energy systems. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Zuiani, Federico and Vasile, Massimiliano and Palmas, Alessandro and Avanzini, Giulio (2010) Direct transcription of low-thrust trajectories with finite trajectory elements. In: 61st International Astronautical Congress, IAC 2010, 2010-09-27 - 2010-10-01, Prague, Czech Republic.

Johnstone, Cameron and Kim, Jae Min and Martin, M. and Oh, Jin-Sook and Kang, Hoon (2010) Internet-based remote condition monitoring of a building integrated wind-PV hybrid energy system. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612

Johnstone, Cameron and Pratt, D. and Clarke, Joseph and Grant, Andrew (2010) A techno-economic appraisal of a tensioned mooring supported, contra-rotating tidal turbine. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612

Ordonez Sanchez, Stephanie Eugenia and Johnstone, Cameron and Grant, Andrew and Rose, Samuel (2010) Experimental tank testing of contra rotating marine turbines to quantify the parameters influencing system dynamic response. In: Proceedings of the World Renewable Energy Congress XI (WRECXI). Future Technology Press. ISBN 9780956151612

Quail, Francis J. and Stickland, M.T. and Baumgartner, B. (2010) Design study of a novel regenerative pump using experimental and numerical techniques. In: Proceedings of the 11th European Fluid Machinery Congress. Woodhead Publishing. ISBN 978-0-85709-091-1

Bennet, Derek J. and Biggs, J.D. and McInnes, C.R. and Macdonald, M. (2010) An analysis of dissipation functions in swarming systems. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10, Nara, Japan.

Biggs, J.D. (2010) Singularities of optimal attitude motions. In: 18th IFAC Symposium on Automatic Control in Aerospace, ACA 2010, 2010-09-06 - 2010-09-10, Nara, Japan.

Thomason, J.L. (2010) Interfacial strength in fibre reinforced thermoplastics. In: International Conference on Interfaces & Interphases in Multicomponent Materials (IIMM), 2010-09-01 - 2010-09-03, Sheffield.

Borg, Matthew Karl and Macpherson, Graham and Reese, Jason (2010) Controllers for imposing continuum-to-molecular boundary conditions in arbitrary fluid flow geometries. Molecular Simulation, 36 (10). pp. 745-757. ISSN 0892-7022

Ceriotti, M. and Vasile, M. (2010) Automated multigravity assist trajectory planning with a modified ant colony algorithm. Journal of Aerospace Computing, Information, and Communication, 7 (9). pp. 261-293. ISSN 1542-9423

Li, Y. and Baker, T.N. (2010) Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology, 26 (9). pp. 1029-1040. ISSN 0267-0836

Punzo, Giuliano and Bennet, Derek James and Macdonald, Malcolm (2010) Swarm shape manipulation through connection control. In: Towards Autonomous Robotis Systems. Lecture Notes in Artificial Intelligence, 6856 (1). Springer. ISBN 978-3-642-23231-2

Thomason, J.L. (2010) Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites. Polymer Composites, 31 (9). pp. 1525-1534. ISSN 0272-8397

Yang, Liu and Thomason, J.L. (2010) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods. Composites Part A: Applied Science and Manufacturing, 41 (9). pp. 1077-1083. ISSN 1359-835X

Punzo, Giuliano and Bennet, Derek J. and Macdonald, M. (2010) Swarm shape manipulation through connection control. In: 12th Conference Towards Autonomous Robotic Systems 2011, 2011-08-31 - 2011-09-02, Sheffield.

Stack, M.M. (2010) Tribo-corrosion maps for application in bio-tribology : some new approaches. In: UK-China Summer School and Workshop on Tribology and Surface Engineering, 2010-08-24 - 2010-08-25, Southampton, UK.

Colombo, C. and McInnes, C.R. (2010) Orbital dynamics of earth-orbiting 'smart dust' spacecraft under the effects of solar radiation pressure and aerodynamic drag. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05, Toronto, Canada.

Brindley, Joseph and Counsell, John and Zaher, Obadah Samir (2010) Design of a non-linear missile autopilot design using Rate Actuated Inverse Dynamics (RAID). In: AIAA Guidance, Navigation and Control Conference, 2010-08-02 - 2010-08-05, Toronto, Canada. (Unpublished)

Ceriotti, M. and McInnes, C.R. (2010) An earth pole-sitter using hybrid propulsion. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05, Toronto, Canada.

Counsell, J.M. and Zaher, O.S. and Brindley, Joseph (2010) Auto-tuning for high performance autopilot design. In: AIAA guidance, navigation, & control conference et al (2010) online proceedings. American Institute of Aeronautics and Astronautics, Reston, VA..

Mckay, Robert and Macdonald, M. and Vasile, M. and Bosquillon de Frescheville, Francois (2010) A novel interplanetary communications relay. In: AIAA/AAS Astrodynamics Specialist Conference 2010, 2010-08-02 - 2010-08-05, Toronto, Canada. (Unpublished)

Sanchez, J.P. and McInnes, Colin R. (2010) Accessibility of the resources of near Earth space using multi-impulse transfers. In: 2010 AIAA/AAS Astrodynamics Specialist Conference, 2010-08-02 - 2010-08-05, Toronto, Canada.

Brown, Blair and McInnes, C.R. and Allouis, E. (2010) Dynamic autonomous intelligent control of an asteroid lander. Journal of Aerospace Engineering, 224 (8). pp. 865-879. ISSN 0893-1321

Dongari, Nishanth and Zhang, Yonghao and Reese, Jason (2010) The importance of mean free path in determining gas flow behaviour. In: 8th International Conference on Nanochannels, Microchannels and Minichannels, 2010-08-01 - 2010-08-05, Montréal,.

Fidalgo, C. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Imai, Y and Yamaguchi, T. (2010) Measuring the cell-free layer in circular microchannels. In: 6th World Congress of Biomechanics, WCB2010, 2010-08-01 - 2010-08-06, Singapore.

Li, H. and MacKenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 0954-4054

Nicholls, William and Borg, Matthew Karl and Reese, Jason (2010) Molecular dynamics simulations of liquid flow in and around carbon nanotubes. In: ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels: Parts A and B. ASME, USA, pp. 979-985. ISBN 978-0-7918-5450-1

Oliveira, Monica and Lima, Rui and Ishikawa, T. and Matsuki, M. and Imai, Y and Yamaguchi, T. (2010) Blood-on-chips : flow through complex geometries. In: 6th World Congress of Biomechanics, WCB2010, 2010-08-01 - 2010-08-06, Singapore.

Taylor, Ian and Robertson, Andrew Colin (2010) Numerical simulation of rivulet dynamics associated with rain- wind-induced vibration. In: ASME Summer Meeting - 7th International Conference on Fluid-Structure Interactions, Flow-Sound Interactions and Flow-induced Vibration and NoisE, 2010-08-01 - 2010-08-05, Montreal.

Chacon-Nava, J.G. and Martinez-Villafañe, A. and Almeraya-Calderon, F. and Cabral-Miramontes, J.A. and Stack, M.M. (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X

Chen, H.F. and Ponter, A.R.S. (2010) A direct method on the evaluation of ratchet limit. Journal of Pressure Vessel Technology, 132 (4). pp. 1-8. ISSN 0094-9930

Minisci, Edmondo and Liqiang, Hou and Vasile, Massimiliano (2010) Multidisciplinary design of a micro-USV for re-entry operations. In: AAS/AIAA Astrodynamic Specialists Conference 2010, 2010-08-02, Toronto.

Trendafilova, I. (2010) An automated procedure for detection and identification of ball bearing damage using multivariate statistics and pattern recognition. Mechanical Systems and Signal Processing, 24 (6). pp. 1858-1869. ISSN 0888-3270

Biggs, J.D. and Holderbaum, William (2010) Integrable quadratic Hamiltonians on the Euclidean group of motions. Journal of Dynamical and Control Systems, 16 (3). pp. 301-317. ISSN 1079-2724

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2010) Shakedown behaviour of composite cylinders with cross holes. In: Proceedings of the ASME Pressure Vessels and Piping Conference 2010, 2010-07-18 - 2010-07-22, Bellevue, Washington.

Ceriotti, M. and McInnes, C.R. (2010) A near term pole-sitter using hybrid solar sail propulsion. In: 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22, New York, USA.

Macdonald, M. and McInnes, C.R. (2010) Solar sail mission applications and future advancement. In: 2nd International Symposiun on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22, New York, USA.

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Elastic instabilities and efficient microfluidic rectifiers. In: Workshop on Flow Instabilities and Turbulence in Viscoelastic Fluids, 2010-07-19 - 2010-07-23, Lorenz Centre, Leiden.

Stack, M.M. and Rodling, J. and Mathew, M.T. and Jawan, H. and Huang, W. and Park, G. and Hodge, C. (2010) Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution : an approach to construction of mechanism and synergism maps for application to bio-implants. WEAR, 269 (5-6). pp. 376-382. ISSN 0043-1648

Avanzini, Giulio and Minisci, Edmondo (2010) Evolutionary design of a full–envelope flight control system for an unstable fighter aircraft. In: IEEE Congress on Evolutionary Computation (CEC) 2010, 2010-07-18, Turin.

Carmichael, Rory and Mackenzie, Donald (2010) Elastic-plastic design by analysis for gross plastic collapse. In: Proceedings of the ASME pressure vessels and piping conference 2010. Pressure Vessels and Piping Division of ASME, 2 . American Society of Mechanical Engineers, Washington, USA, pp. 81-87. ISBN 978-0-7918-4921-7

Ceriotti, M. and Vasile, M. (2010) An ant system algorithm for automated trajectory planning. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23, Barcelona, Spain.

Ceriotti, M. and Vasile, M. (2010) An ant system algorithm for automated trajectory planning. In: 2010 Congress on evolutionary computation (CEC). IEEE Congress on Evolutionary Computation . IEEE, New York. ISBN 9781424481262

Schutze, O. and Lara, A. and Coello Coello, Carlos A. and Vasile, Massimiliano (2010) Computing approximate solutions of scaler optimization problems and applications in space mission design. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23, Barcelona, Spain.

Vasile, Massimiliano and Zuiani, Federico (2010) A hybrid multi-objective optimization algorithm applied to space trajectory. In: World Congress on Computational Intelligence, WCCI 2010, 2010-07-18 - 2010-07-23, Barcelona, Spain.

Sousa, P.C. and Afonso, A.M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2010) Microfluidic flows of viscoelastic fluids. In: Vth Brazilian Conference on Rheology, 2010-07-14 - 2010-07-16, Rio de Janeiro.

Brindley, Joseph and Counsell, John and Pearce, John G (2010) Modelling and simulation of advanced non-linear autopilot designs. In: Grand Challenges in Modelling and Simulation Conference, 2010-07-11 - 2010-07-14, Ottawa.

Whyte, G. and Murray, C. and Maddock, Christie and Vasile, Massimiliano and Drysdale, T.D. (2010) Integrated 915 MHz dual-patch circularly polarized antenna for Suaineadh space web experiment. In: Proceedings of the IEEE Symposium on Antennas and Propagation. Antennas and Propagation . IEEE Conference Proceedings, pp. 1-4. ISBN 978-1-4244-4968-2

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Effects of partial wrist arthrodesis on loading at the radiocarpal joints. In: 17th Congress of the European Society of Biomechanics, 2010-07-05 - 2010-07-08, Edinburgh, UK. (Unpublished)

Roy, M. and Pauschitz, A. and Stack, M.M. (2010) Guest Editorial: Tribocorrosion 2009: East meets West. Tribology International, 43 (7). pp. 1201-1202. ISSN 0301-679X

Stack, M.M. and Abdulrahmen, G.H. (2010) Mapping erosion-corrosion of carbon steel in oil exploration conditions : some new approaches to characterizing mechanisms and synergies. Tribology International, 43 (7). pp. 1268-1277. ISSN 0301-679X

Thomason, J.L. and Ali, J.Z. and Anderson, J. (2010) The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 41 (7). pp. 820-826. ISSN 1359-835X

Vasile, Massimiliano and Maddock, Christie and Saunders, C. and Sorel, M. and Watson, I. (2010) Active orbital debris removal by enhanced solar light. In: European Workshop on Active Debris Removal, 2010-06-22 - 2010-06-22, Paris.

Borg, Matthew Karl and Nicholls, William and Reese, Jason (2010) Hybrid molecular dynamics and Navier-Stokes method in complex nanoflow geometries. In: Nanotech 2010. Taylor and Francis, CRC Press, Abingdon. ISBN 9781439834183

Borg, Matthew Karl and Nicholls, William and Reese, Jason (2010) MD boundary conditions for pressure gradient flows : nano-mixing and nano-droplet deformation in extensional flows. In: Nanotech 2010. Taylor & Francis, Abingdon. ISBN 9781439834183

Brown, R.E. and Phillips, C. and Kim, H.W. (2010) Helicopter brownout - can it be modelled? In: Royal Aeronautical Society Rotorcraft Group Conference: Operating Helicopters Safely in a Degraded Visual Environment, 2010-06-16 - 2010-06-17, London, UK.

McLaren, A.J. and Jenkins, P. (2010) Mechanical dissection in an introductory engineering design module. In: 6th International CDIO Conference, 2010-06-15 - 2010-06-18, Montréal, Canada.

Pugh, Alistair William and Hamilton, Robert and Nash, David and Otto, S.R. (2010) Characterisation of the materials in golf ball construction for use in finite element analysis. In: Engineering Sport and Engineering Emotion. Procedia Engineering, 2 . International Sports Engineering Association, pp. 3234-3236.

Gentles, F. and Anderson, J. and Thomason, J.L. (2010) Characterisation of the transverse thermoelastic properties of natural fibres used in composites. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10, Budapest, Hungary.

Palazzetti, Roberto and Trendafilova, Irina and Zucchelli, Andrea and Minak, Giangiacomo (2010) Delamination localisation and length estimation in composite laminate beam by VSHM and pattern recognition methods. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10, Budapest, Hungary. (Unpublished)

Reilly, S.P. and Thomason, J.L. (2010) Effects of silane coating on the properties of glass fibre and glass fibre reinforced epoxy resin. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10, Budapest, Hungary.

Thomason, J.L. and Yang, Liu (2010) The influence of thermal stress on the interface strength of a fibre-reinforced thermoplastic investigated by a novel single fibre technique. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10, Budapest, Hungary.

Yang, Liu and Thomason, J.L. and Zhu, W.Z. (2010) The influence of oxidative-thermal degradation of polypropylene on measured interface strength of glass fibre-polypropylene. In: 14th European Conference on Composite Materials, ECCM14, 2010-06-07 - 2010-06-10, Budapest, Hungary.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Finite element model creation and stability considerations of complex biological articulation : the human wrist joint. Medical Engineering and Physics, 32 (5). pp. 523-531. ISSN 1350-4533

Manoach, E. and Trendafilova, I. (2010) Damage detections in nonlinear vibrating thermally loaded plates. In: Materials with complex behaviour. Advanced Structural Materials . Springer Verlag, Berlin Heidelberg, pp. 193-211. ISBN 9783642126673

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Efficient microfluidic rectifiers for viscoelastic fluid flow. Journal of Non-Newtonian Fluid Mechanics, 165 (11-12). pp. 652-671. ISSN 0377-0257

Stack, M.M. and Abdelrahman, M.S. (2010) CFD modelling of erosion-corrosion of steel in aqueous environments : particle concentration effects on the regime boundaries. In: 14th Nordic Conference on Tribology, NordTrib 2010, 2010-06-08 - 2010-06-11, Luleå, Sweden.

Vasile, Massimiliano and Maddock, Christie (2010) On the deflection of asteroids with mirrors. Celestial Mechanics and Dynamical Astronomy, 107 (1-2). pp. 265-284. ISSN 0923-2958

Pan, W. and Boyle, J.T. and Ramlan, Mohd. and Dun, C. and Ismail, Mohd. and Hakoda, K. (2010) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane-strain small punch test. In: SPT Conference 2010, 1900-01-01, Ostrava, Czech Republic.

Carus, D. (2010) The European project SMILING : self mobility improvement in the ederly by counteracting falls. In: 17th PRM European Congress, European Society of Physical and Rehabilitation Medicine, 2010-05-23 - 2010-05-27, Padova, Italy. (Unpublished)

Kelly, N.J. and Cockroft, J. and Ghauri, S. (2010) Performance analysis of air source heat pumps using detailed simulations and comparison to field trial data. In: e-Sim2010, International Building Performance Simulation Association Conference, 2010-05-19 - 2010-05-20, Winnipeg, Canada.

Fico, Vincenzo and Emerson, David and Reese, Jason (2010) A new parallel compact TVD scheme for compressible flows employing domain decomposition. In: 22nd International Conference on Parallel Computational Fluid Dynamics, Parallel CFD 2010, 2010-05-17 - 2010-05-21, Kaohsiung,.

Thomason, J.L. and Ali, J.Z. and Anderson, John (2010) Effects of hydrolysis ageing on the performance and dimensional stability of glass-fiber reinforced polyamide 66. In: 68th Annual Technical Conference and Exhibition, ANTEC 2010, 2010-06-16 - 2010-06-20, Orlando, Florida.

Phillips, C. and Kim, H.W. and Brown, R.E. (2010) The flow physics of helicopter brownout. In: 66th American Helicopter Society Forum: Rising to New Heights in Vertical Lift Technology, 2010-05-11 - 2010-05-13, Phoenix, Arizona.

Whitehouse, G.R. and Boschitsch, A.H. and Smith, M.J. and Lynch, C.E. and Brown, Richard (2010) Investigation of mixed element hybrid grid-based CFD methods for rotorcraft flow analysis. In: 66th American Helicopter Society Forum: Rising to New Heights in Vertical Lift Technology, 2010-05-11 - 2010-05-13, Phoenix, Arizona.

Greenshields, C.J. and Weller, H.G. and Gasparini, F. and Reese, J.M. (2010) Implementation of semi-discrete, non-staggered central schemes in a collated, polyhedral, finite volume framework, for high-speed viscous flows. International Journal of Numerical Methods for Heat and Fluid Flow, 63. pp. 1-21. ISSN 0961-5539

Baig, S. and McInnes, C.R. (2010) Light levitated geostationary cylindrical orbits are feasible. Journal of Guidance, Control and Dynamics, 33 (3). pp. 782-793. ISSN 0731-5090

Baker, T.N. (2010) Laser surface modification of Ti alloys. In: Surface Engineering of Light Alloys - Aluminium, Magnesium and Titanium Alloys. Woodhead Publications, Cambridge, UK, pp. 398-443. ISBN 1-84569-537-2

Biggs, J.D. and McInnes, C.R. (2010) Passive orbit control for space-based geo-engineering. Journal of Guidance, Control and Dynamics, 33 (3). pp. 1017-1020. ISSN 0731-5090

Macdonald, M. and McInnes, C.R. and Hughes, G.W. (2010) Technology requirements of exploration beyond Neptune by solar sail propulsion. Journal of Spacecraft and Rockets, 47 (3). pp. 472-483. ISSN 0022-4650

Kim, D.H. and Yu, D.O. and Kwon, O.J. and Fletcher, T.M. and Scheurich, F. and Brown, R.E. (2010) Predicting unsteady blade loads of a wind turbine using RANS and vorticity transport methodologies. In: European Wind Energy Conference, 2010-04-20 - 2010-04-23, Warsaw, Poland.

Yu, D.O. and Kwon, O.J. and Fletcher, T.M. and Scheurich, F. and Brown, R.E. (2010) Prediction of unsteady blade loads of a wind turbine using RANS and vorticity transport methodologies. In: Annual Conference of the Korea Wind Energy Association, 2010-04-07 - 2010-04-09, Seoul, Korea.

Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2010) Elastic-driven instabilities in microfluidic flow focusing devices. In: European Rheology Conference, AERC 2010, 2010-04-06 - 2010-04-09, Götegorg.

Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2010) Extensional flow of blood analogue solutions. In: European Rheology Conference, AERC 2010, 2010-04-06 - 2010-04-09, Götegorg.

Arlemark, E.J. and Dadzie, S.K. and Reese, J.M. (2010) An extension to the Navier-Stokes equations to incorporate gas molecular collisions with boundaries. Journal of Heat Transfer, 132 (4). 041006-1-041006-8. ISSN 0022-1481

Taylor, I.J. and Robertson, A.C. and Wilson, S. and Duffy, B.R. and Sullivan, J.M. (2010) New developments in rain–wind-induced vibrations of cables. Proceedings of the ICE - Structures and Buildings, 163 (2). pp. 73-86. ISSN 0965-0911

Boyle, James (2010) Some consequences of stress range dependent constitutive models in creep. In: IUTAM Symposium on Advanced Materials Modelling for Structures (STAMM), 2010-04-23 - 2010-04-23, Paris.

Clarke, J.A. and Johnstone, C. (2010) Assessing and benchmarking the performance of advanced building facades. In: Materials for energy efficiency and comfort in buildings. Woodhead Energy Series, 1-3, C (14). Woodhead Publishing, Cambridge, pp. 484-502. ISBN 1845695267

Quail, Francis J. and Stickland, M.T. and Scanlon, T.J. (2010) Numerical and experimental design study of a regenerative pump. In: Current Themes in Engineering Science. American Institute of Physics, pp. 165-180. ISBN 978-0-7354-0766-4

Bennet, Derek J. and McInnes, C.R. (2010) Distributed control of multi-robot systems using bifurcating potential fields. Robots and Autonomous Systems, 58 (3). pp. 256-264. ISSN 0921-8890

Tuohy, Paul Gerard and Roaf, S. and Nicol, F. and Humphreys, M. and Boerstra, A. (2010) Twenty-first century standards for thermal comfort : Low carbon building design and operation. In: Transforming the Markets in the Built Environment. Earthscan Publications Ltd. ISBN 9781849710886

McInnes, C.R. (2010) Space-based geoengineering: challenges and requirements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (3). pp. 571-580. ISSN 0954-4062

Croisard, Nicolas and Vasile, Massimiliano and Kemble, Stephen and Radice, Gianmarco (2010) Preliminary space mission design under uncertainty. Acta Astronautica, 66 (5-6). pp. 654-664. ISSN 0094-5765

Roaf, S. and Nicol, F. and Humphreys, M. and Tuohy, Paul Gerard and Boerstra, A. (2010) Twentieth century standards for thermal comfort : Promoting high energy buildings. Architectural Science Review, 53 (1). pp. 65-77. ISSN 0003-8628

Tuohy, P.G. and Roaf, S. and Nicol, F. and Humphreys, M.A. and Boerstra, A. (2010) Twenty first century standards for thermal comfort : fostering low carbon building design and operation. Architectural Science Review, 53 (1). pp. 78-86. ISSN 0003-8628

Vasile, Massimiliano and Minisci, Edmondo and Locatelli, Marco (2010) Analysis of some global optimization algorithms for space trajectory design. Journal of Spacecraft and Rockets, 47 (2). pp. 334-344. ISSN 0022-4650

Roaf, S. and Nicol, F. and Humphreys, M. and Tuohy, Paul Gerard and Boerstra, A. (2010) Twentieth century standards for thermal comfort : High energy buildings. In: Transforming Markets in the Built Environment. Earthscan Publications Ltd. ISBN 9781849710886

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) The importance of the radiotriquetral ligament for proximal row stability in the wrist : a finite element study. In: 9th International Symposium in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 2010-02-24 - 2010-02-27, Valencia, Spain.

Abdulrahmen, G.H. and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : Impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25, Tripoli, Libya.

Counsell, John M. (2010) Powering of Devices. GB 1002832.2.

Brown, Blair and McInnes, C.R. (2010) A dynamical systems approach to micro spacecraft autonomy. In: 20th AAS/AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17, San Diego, California.

Simo, J. and McInnes, C.R. (2010) Displaced solar sail orbits: dynamics and applications. In: 20th AAS/AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17, San Diego, California.

Simo, Jules and McInnes, Colin (2010) On the stability of approximate displaced lunar orbits. In: Spaceflight mechanics 2010. Advances in the Astronautical Sciences, 136 . Univelt Inc, San Diego, California, pp. 1229-1238. ISBN 9780877035602

Stack, M.M. and Abdelrahman, M. and Jana, B. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. WEAR, 268 (3-4). pp. 533-542. ISSN 0043-1648

Chen, Haofeng (2010) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. Journal of Pressure Vessel Technology, 132 (1). 011202-011210. ISSN 0094-9930

Simo, J. and McInnes, C.R. (2010) On the stability of displaced two-body lunar orbits. In: 20th AIAA Space Flight Mechanics Meeting, 2010-02-14 - 2010-02-17, San Diego, California.

Wu, J. and Shu, C. and Zhang, Y.H. (2010) Simulation of incompressible viscous flows around moving objects by a variant of immersed boundary-Lattice Boltzmann method. International Journal of Numerical Methods for Heat and Fluid Flow, 62 (3). pp. 327-354. ISSN 0961-5539

Dadzie, S.K. and Reese, J.M. (2010) A volume-based hydrodynamic approach to sound wave propagation in a monatomic gas. Physics of Fluids, 22. 016103. ISSN 1070-6631

Purandare, Y. and Ehiasarian, A.P. and Stack, M.M. and Hovsepian, P. (2010) CrN/NbN coatings deposited by HIPIMS : A preliminary study of erosion-corrosion performance. Surface and Coatings Technology, 204 (8). pp. 1158-1162. ISSN 0257-8972

McInnes, C.R. (2010) Mars climate engineering using orbiting solar reflectors. In: Mars: Prospective Energy and Material Resources. Springer-Verlag. ISBN 978-3-642-03628-6

Sanchez, J.P. and Vasile, M. and Radice, G. (2010) Consequences of asteroid fragmentation during impact hazard mitigation. Journal of Guidance, Control and Dynamics, 33 (1). pp. 126-146. ISSN 0731-5090

Fico, V. and Emerson, D.R. and Reese, J.M. (2010) A high order compact scheme for hypersonic aerothermodynamics. In: 48th AIAA Aerospace Sciences Meeting, 2010-01-04 - 2010-01-07, Orlando, Florida.

Fletcher, T.M. and Brown, R.E. (2010) Interaction of an Eulerian flue gas plume with wind turbines. In: 29th ASME Wind Energy Symposium, 2010-01-04 - 2010-01-07, Orlando, Florida.

Li, H. and Johnston, R. and MacKenzie, D. (2010) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. Journal of Pressure Vessel Technology, 132 (1). 011205. ISSN 0094-9930

Scheurich, F. and Fletcher, T.M. and Brown, R.E. (2010) The influence of blade curvature and helical blade twist on the performance of a vertical-axis wind turbine. In: 29th ASME Wind Energy Symposium, 2010-01-04 - 2010-01-07, Orlando, Florida.

Robertson, A.C. and Taylor, I.J. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M. (2010) Numerical simulation of rivulet evolution on a horizontal cable subject to an external aerodynamic field. Journal of Fluids and Structures, 26 (1). pp. 50-73. ISSN 0889-9746

Simo, J. and McInnes, C.R. (2010) Designing displaced lunar orbits using low-thrust propulsion. Journal of Guidance, Control and Dynamics, 33 (1). pp. 259-265. ISSN 0731-5090

Abid, M. and Nash, D.H. (2010) Parametric study of gasketed flange joints of different sizes and classes for improved design and performance. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Boyle, James T. (2010) Research-teaching linkages : enhancing graduate attributes - engineering and the built environment. [Report]

Stickland, Matthew and Fabre, Sylvie and Scanlon, Thomas (2010) User Defined Function: lidar_3D : NORSEWInD Report UoSNW006. [Report]

Ceriotti, M. (2010) Global optimisation of multiple gravity assist trajectories. PhD thesis, University of Glasgow.

Colombo, C. (2010) Optimal trajectory design for interception and deflection of Near Earth Objects. PhD thesis, University of Glasgow.

Counsell, John and Scott, Alastair and Khalid, Yousaf Ali and Murphy, Gavin Bruce and Stewart, Matt John and Brindley, Joseph (2010) BRE Centre of Excellence in Energy Utilisation. BRE Trust Review (1st Ed). IHS BRE Press, Berkshire. ISBN 9781848061354

Kim, Ji-Yeon and Hong, Sung-Hee and Park, Hyo-Soon and Kim, Sung-Sil and Kim, Jae Min (2010) A research on the application method for renewable energy complex system for school buildings. In: EKC 2009, Proceedings of the EU-Korea Conference on Science & Technology. Springer Proceedings in Physics, 135 . Springer-Verlag Berlin, Germany, pp. 61-72. ISBN 978-3-642-13623-8

Oh, Jin-Sook and Bae, Soo-Young and Lee, Li-Young and Kwak, Jun-Ho and Kim, Jae Min and Johnstone, Cameron (2010) Wireless monitoring system for hybrid power generation system. In: Springer Proceedings in Physics. Springer Proceedings in Physics, 135 . Springer-Verlag Berlin, Berlin, pp. 91-98. ISBN 978-3-642-13623-8

Qin, Y. and Brockett, A. and Ma, Y. and Razali, Akhtar and Zhao, J. and Harrison, C.S. and Pan, W. and Dai, X. and Loziak, D. (2010) Micro-manufacturing : Research, technology outcomes and development issues. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 821-837. ISSN 0268-3768

Quail, Francis J. and Scanlon, T.J. and Stickland, M.T. (2010) Development of a regenerative pump impeller using rapid manufacturing techniques. Rapid Prototyping Journal, 16 (5). pp. 337-344. ISSN 1355-2546

Taylor, I.J. and Robertson, A.C. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M. (2010) New developments in rain-wind-induced vibrations of cables. Proceedings of the ICE - Structures and Buildings, 163 (2). pp. 73-86. ISSN 0965-0911

Vasile, Massimiliano and Croisard, N. (2010) Robust preliminary space mission design under uncertainty. In: Copmutational Intelligence in Expensive Optimization Problems. Adaptation Learning and Optimization, 2 . Springer-Verlag Berlin, Berlin, pp. 543-570. ISBN 978-3-642-10700-9

Badawy, Ahmed and McInnes, C.R. (2009) Small spacecraft formation-flying using potential functions. Acta Astronautica, 65 (11-12). pp. 1783-1788. ISSN 0094-5765

Campobasso, M and Zanon, A and Minisci, Edmondo and Bonfiglioni, A (2009) Wake tracking and turbulence modelling in computational aerodynamics of wind turbine airfoils. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (8). pp. 939-951. ISSN 0957-6509

Liu, H.H. and Zhang, Y.H. (2009) Lattice Boltzmann simulation of droplet behaviour in microfluidic devices. Houille Blanche, 6. pp. 84-92. ISSN 0018-6368

Simo, Jules and McInnes, Colin R. (2009) Solar sail orbits at the Earth-Moon libration points. Communications in Nonlinear Science and Numerical Simulation, 14 (12). pp. 4191-4196. ISSN 1007-5704

Vasile, Massimiliano (2009) A multi-mirror solution for the deflection of dangerous NEOs. Communications in Nonlinear Science and Numerical Simulation, 14 (12). pp. 4139-4152. ISSN 1007-5704

Li, L. and Polido Gomes, J.F. and Brown, J.G. and Uttamchandani, D.G. and Pan, W. and Weiland, D. and Begbie, M. and Lowrie, C. and Desmulliez, M.P.Y. (2009) Simultaneous determination of the Young's modulus and Poisson's ratio in micro/nano materials. Journal of Micromechanics and Microengineering, 19 (12). ISSN 0960-1317

Kim, H.W. and Brown, R.E. (2009) A comparison of coaxial and conventional rotor performance. Journal of the American Helicopter Society, 55 (1). 012004-1. ISSN 0002-8711

Bulgheroni, M. and D'Amico, E. and Bar-Heim, S. and Carus, D. and Harrison, C.S. and Marcellini, F. (2009) The SMILING project : prevention of falls by a mechatronic training device. In: The 2nd IASTED International Conference on Telehealth and Assistive Technology, TAT 2009, 2009-11-02 - 2009-11-04, Cambridge, Massachusetts. (Unpublished)

Biggs, James and McInnes, Colin (2009) Time-delayed feedback control in astrodynamics. Journal of Guidance, Control and Dynamics, 32 (6). pp. 1804-1811. ISSN 0731-5090

Colombo, C. and Vasile, M. and Radice, G. (2009) Optimal low-thrust trajectories to asteroids through an algorithm based on differential dynamic programming. Celestial Mechanics and Dynamical Astronomy, 105 (1-3). pp. 75-112. ISSN 0923-2958

Soulages, J. and Oliveira, Monica and Sousa, P.C. and Alves, M.A. and McKinley, G.H. (2009) Investigating the stability of viscoelastic stagnation flows in T-shaped microchannels. Journal of Non-Newtonian Fluid Mechanics, 163 (1-3). pp. 9-24. ISSN 0377-0257

Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J. (2009) Practical application of CFD for wind loading on tall buildings. In: 7th International Conference on Tall Buildings, 2009-10-29 - 2009-10-30, Hong Kong, China.

Clannachan, G.H. and Lim, J.B.P. and Bicanic, N. and Taylor, I.J. and Scanlon, T.J. (2009) Practical application of CFD for wind loading on tall buildings. In: Proceedings of the 7th international conference on tall buildings. Research Publishing Services, Singapore, pp. 767-776. ISBN 9789628014194

Kim, H.W. and Brown, R.E. (2009) A rational approach to comparing the performance of coaxial and conventional rotors. Journal of the American Helicopter Society, 55 (1). 012003 1-9. ISSN 0002-8711

Kelly, M.E. and Phillips, C. and Scheurich, F. and Kim, H.W. and Fletcher, T.M. and Brown, R.E. (2009) Applying rotorcraft modelling technology to renewable energy research. In: 2nd AHS/KSASS International Forum on Rotorcraft Multidiscipllinary Technology, 2009-10-19 - 2009-10-20, Seoul, Korea.

Cerdeira, T. and Lima, Rui and Oliveira, Monica and Ishikawa, T. and Monteiro, F. and Imai, Y and Yamaguchi, Y. (2009) Determination of the cell-freelayer in circular PDMS microchannels. In: Proceedings of VIPIMAGE-II ECCOMAS. UNSPECIFIED, Portugal, p. 357.

Sousa, P.C. and Pinho, I.S. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2009) Flow of a blood analogue solution through microfabricated hyperbolic contractions. In: Proceedings of VIPIMAGE-II ECCOMAS. UNSPECIFIED, p. 361.

Ceriotti, M. and Vasile, M. (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.

Ceriotti, M. and Vasile, M. (2009) MGA trajectory planning with an ACO-inspired algorithm. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.

McKay, R.J. and Macdonald, M. and Bosquillon de Frescheville, Francois and Vasile, M. and McInnes, C.R. and Biggs, J.D. (2009) Non-Keplerian orbits using low thrust, high ISP propulsion systems. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.

Poole, R.J. and Oliveira, Monica and Afonso, A.M. and Alves, M.A. and Pinho, F.T. and Rocha, G.N. and Oliveira, P.J. (2009) Purely-elastic instabilities in extensional flows. In: IMA workshop: Flowing Complex Fluids: Fluid Mechanics-Interaction of Microstructure and Flow, 2009-10-12 - 2009-10-16, Minnesota, Minneapolis.

Simo, J. and McInnes, C.R. (2009) Analysis and control of displaced periodic orbits in the Earth-Moon system. In: 60th International Astronautical Congress, 2009-10-12 - 2009-10-16, Daejeon, Korea.

Gislason, Magnus K. and Nash, D.H. and Nicol, A.C. and Kanellopoulos, A. and Bransby-Zachary, M. and Hems, T. and Condon, B. and Stansfield, B. (2009) A three-dimensional finite element model of maximal grip loading in the human wrist. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223 (7). pp. 849-861. ISSN 0954-4119

Alexander, L.A. and Wood, J. (2009) A study of the low-cycle fatigue failure of a galvanised steel lighting column. Engineering Failure Analysis, 16 (7). pp. 2153-2162. ISSN 1350-6307

Clarke, J.A. and Yaneske, P.P. (2009) A rational approach to the harmonisation of the thermal properties of building materials. Building and Environment, 44 (10). pp. 2046-2055. ISSN 0360-1323

Reese, J.M. and Zhang, Y.H. (2009) Simulating fluid flows in micro and nano devices: The challenge of non-equilibrium behaviour. Journal of Computational and Theoretical Nanoscience, 6 (10). pp. 2061-2074. ISSN 1546-1955

Ceriotti, M. and Vasile, M. (2009) Automatic MGA trajectory planning with a modified ant colony optimization algorithm. In: 21st International Space Flight Dynamics Symposium, ISSFD 2009, 2009-09-28 - 2009-10-02, Toulouse, France.

Kelly, M.E. and Brown, R.E. (2009) The effect of blade aerodynamic modelling on the prediction of the blade airloads and the acoustic signature of the HART II rotor. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25, Hamburg, Gemany.

Phillips, C. and Kim, H.W. and Brown, R.E. (2009) The effect of rotor design on the fluid dynamics of helicopter brownout. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25, Hamburg, Gemany.

Smith, M.J. and Shenoy, R. and Kenyon, A.R. and Brown, R.E. (2009) Vorticity-transport and unstructured RANS investigation of rotor-fuselage interactions. In: 35th European Rotorcraft Forum, 2009-09-22 - 2009-09-25, Hamburg, Gemany.

Nash, D.H. and Hitchen, J. (2009) Effects of local reinforcement on nozzles in dished ends. In: 12th International Conference on Pressure Vessel Technology, ICPVT-12, 2009-09-20 - 2009-09-23, Jeju Island, South Korea.

Correia, Antónia and Cavadas, A. and Afonso, A.M. and Oliveira, Monica and Alves, M.A. and Pinho, F.T. (2009) Numerical investigation of laminar flow in symmetric and asymmetric complex T-channels for micro-mixing. In: III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia, 2009-09-17 - 2009-09-18, Bragança.

Sousa, P.C. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Design of an efficient microfluidic rectifier for viscoelastic fluid flow. In: III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia, 2009-09-17 - 2009-09-18, Bragança.

Oldroyd, A. and Hasager, C.B. and Stickland, M.T. and Mikkelsen, T. and Estanqueiro, A. (2009) EU-Norsewind: delivering offshore wind speed data. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16, Stockholm, Sweden.

Stickland, M.T. and Scanlon, T.J. and Fabre, S. and Oldroyd, A. and Mikkelsen, T. (2009) EU-Norsewind: assessment of viability of open source CFD code for the wind industry. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16, Stockholm, Sweden.

Stickland, M.T. and Scanlon, T.J. and Fabre, S. and Oldroyd, A. and Mikkelsen, T. (2009) EU-Norsewind : Investigation of flow distortion effects on offshore instrumentation. In: European Offshore Wind Conference and Exhibition, 2009-09-14 - 2009-09-16, Stockholm, Sweden.

Scanlon, T.J. and Roohi, E. and Reese, J.M. (2009) Trials of an open source DSMC code. In: Direct Simulation Monte Carlo: Theory, Methods and Applications Conference, DSMC-09, 2009-09-13 - 2009-09-16, Santa Fe, New Mexico, USA. (Unpublished)

Abid, Muhammad and Nash, D.H. (2009) Design Optimization and Analysis Techniques. VDM Verlag, Saarbrücken, Germany. ISBN 9783639197334, 363919733X

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. and Ordonez-Sanchez, S. (2009) Contra-rotating marine current turbines : single point tethered floating system - stabilty and performance. In: 8th European Wave and Tidal Energy Conference, EWTEC 2009, 2009-09-07 - 2009-09-10, Uppsala, Sweden.

McCombes, Tom and Johnstone, Cameron and Grant, Andrew (2009) Unsteady 3D wake modelling for marine current turbines. In: 8th European Wave and Tidal Energy Conference, EWTEC 2009, 2009-09-07 - 2009-09-10, Uppsala, Sweden.

Stack, M.M. and Abdulrahman, Ghaith and Jana, B. (2009) A map and a pipe: a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling. In: EuroCorr 2009, 2009-09-06 - 2009-09-10, Nice, France.

Reese, J.M. and Lockerby, D.A. and Emerson, D.R. (2009) Gas dynamics at the micro-scale : a review of progress in hydrodynamic modelling. In: 2nd Micro and Nano Flows Conference, MNF2009, 2009-09-01 - 2009-09-02, Uxbridge, UK. (Unpublished)

Trendafilova, I. and Kazandjiev, R. (2009) Smart materials for intelligent structural health monitoring. In: 11th National Congress on Theoretical and Applied Mechanics, NCTAM 2009, 2009-09-02 - 2009-09-05, Borovetz, Bulgaria.

Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836

Ozdemir, Pinar and Mohr, S. and Wang, Changhai and Stickland, M.T. and Goddard, N.J. and Fielden, P.R. and Zhang, Yonghao (2009) Self-organised droplet flow patterns in microchannels. In: 2nd Micro and Nano Flows Conference 2009, 2009-09-01 - 2009-09-02, London, UK.

Lima, Rui and Oliveira, Monica and Ishikawa, T. and Kaji, H. and Tanaka, S. and Nishizawa, M. and Yamaguchi, T. (2009) Axisymmetric polydimethysiloxane microchannels for in vitro hemodynamic studies. Biofabrication, 1 (3). ISSN 1758-5082

Simo, J. and McInnes, C.R. (2009) Asymptotic analysis of displaced lunar orbits. Journal of Guidance, Control and Dynamics, 32 (5). pp. 1666-1671. ISSN 0731-5090

Counsell, John and Khalid, Yousaf Ali (2009) An holistic approach to assess the design and simulation of intelligent building control systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15, Dublin, Republic of Ireland.

Suzuki, M. and Uchiyama, K. and Bennet, Derek J. and McInnes, C.R. (2009) Three-dimensional formation flying using bifurcating potential fields. In: AIAA Guidance, Navigation and Control Conference, 2009-08-10 - 2009-08-13, Chicago, Illinois.

Counsell, John M. and Khalid, Yousaf A. (2009) A holistic analysis method to assess the controllability of commercial buildings and their systems. In: 3rd International Conference on Sustainable Energy and Environmental Protection, SEEP 2009, 2009-08-12 - 2009-08-15, Dublin, Republic of Ireland.

Liu, H. and Zhang, Y.H. (2009) Droplet formation in a T-shaped microfluidic junction. Journal of Applied Physics, 106 (3). 034906. ISSN 0021-8979

Vasile, Massimiliano and Locatelli, Marco (2009) A hybrid multiagent approach for global trajectory optimization. Journal of Global Optimization, 44 (4). pp. 461-479. ISSN 0925-5001

Baig, Shahid and McInnes, C.R. (2009) Artificial halo orbits for low-thrust propulsion spacecraft. Celestial Mechanics and Dynamical Astronomy, 104 (4). pp. 321-335. ISSN 0923-2958

Colombo, C. and Vasile, M. and Radice, G. (2009) Semi-analytical solution for the optimal low-thrust deflection of near-Earth objects. Journal of Guidance, Control and Dynamics, 32 (3). pp. 796-809. ISSN 0731-5090

Counsell, John M. and Brindley, Joseph and Macdonald, M. (2009) Non-linear autopilot design using the philosophy of variable transient response. In: AIAA Guidance, Navigation and Control Conference, 2009-08-10 - 2009-08-13, Chicago, Illinois.

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2009) Three-dimensional flow of Newtonian and Boger fluids in square-square contractions. Journal of Non-Newtonian Fluid Mechanics, 160 (2-3). pp. 122-139. ISSN 0377-0257

Kummert, M. and Dempster, W.M. and McLean, Kenneth (2009) Transient thermal analysis of a data centre cooling system under fault conditions. In: 11th International Building Performance Simulation association Conference and Exhibition, Building Simulation 2009, 2009-07-27 - 2009-07-30, University of Strathclyde, Glasgow. (Unpublished)

Yang, L. and Thomason, J.L. (2009) Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microdebond methods. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31, Edinburgh, UK.

Clarke, J.A. and Ghauri, S. and Johnstone, C. and Kim, J.M. and Tuohy, P.G. (2009) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30, Glasgow, Scotland.

Clarke, Joseph and Humphreys, M.A. and Nicol, J.F. and Rijal, H.B. and Tuohy, Paul Gerard (2009) The thermal simulation of an office building implementing a new behavioural algorithm for window opening and the use of ceiling fans. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Cockroft, Jeremy and Ghauri, Sabeeta and Samuel, Aizaz Aamir and Tuohy, Paul Gerard (2009) Complex energy simlulation using simplified user interaction mechanisms. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Cockroft, Jeremy and Kennedy, D. and O'Hara, M. and Samuel, Aizaz Aamir and Strachan, Paul and Tuohy, Paul Gerard (2009) Development and validation of detailed building, plant and controller modelling to demonstrate interactive behaviour of system components. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30, Glasgow, Scotland.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2009) Impact characterisation of doubly curved composite structure. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31, Edinburgh, UK. (Unpublished)

Donn, M.R. and CRAWLEY, DRURY BROWNE and Hand, Jon and Marsh, A. (2009) The provenances of your simulation data. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Frontini, Francesco and Kuhn, T.E. and Heikel, S. and Strachan, Paul and Kokogiannakis, Georgios (2009) Implementation of a new bi-directional solar modelling method for complex facades within the ESP-r building simulation program. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30, Glasgow, Scotland.

Ghauri, Sabeeta and Hand, Jon and Johnstone, Cameron and Kim, Jae Min and Kokogiannakis, Georgios and Tuohy, Paul Gerard and Woo, K-H. (2009) Adoption of dynamic simulation for an energy performance rating tool for Korean residential buildings : EDEM-SAMSUNG. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Murphy, Gavin Bruce and Kummert, Michael and Anderson, B.R. and Counsell, John (2009) A comparison of the UK Standard Assessment Procedure (SAP) and detailed simulation of building-integrated renewable energy systems. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Novak, J and Pearce, C. J. and Grassl, P. and Yang, Liu and Thomason, James (2009) Analysis of the microbond test using nonlinear fracture mechanics. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31, Edinburgh, UK.

Prazeres, Luis and Kim, Jae Min and Hand, Jon (2009) Improving communication in building simulation supported projects. In: 11th International IBPSA Conference, 2009-07-27 - 2009-07-30, Glasgow, Scotland.

Thomason, J.L. (2009) Why are natural fibres failing to deliver on composite performance? In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31, Edinburgh, UK.

Tuohy, Paul Gerard (2009) Simulation and BIM in building design, commissioning and operation: a comparison with the microelectronics industry. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Wang, C.C. and Thomason, James and Jones, F.R. (2009) The role of the thermal induced residual stresses in a single fibre thermoplastic model composite. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31, Edinburgh, UK.

Waseem, Y. and Kelly, N.J. and Scanlon, T.J. and Hall, N. (2009) A methodology and toolkit for the assessment and selection of LZC technologies in the building design process. In: Building Simulation 2009, 11th International Building Performance Simulation Association Conference, 2009-07-27 - 2009-07-30, Glasgow, UK.

Chen, Haofeng (2009) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30, Prague, Czech Republic.

Muscat, M. and Degiorgio, K. and Wood, J. (2009) Comparison between different approaches for the evaluation of the hot spot structural stress in welded pressure vessel components. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30, Prague, Czech Republic.

Manoach, Emil and Trendafilova, Irina (2009) Damage detections in nonlinear vibrating thermally loaded plates. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23, Rome, Italy.

Kennedy, Johnathan J. and Lamond, Andrew and Stickland, M.T. (2009) Research into the installation and optimisation of turning vanes and drag reduction technology applied to the Landrover Discovery MK3 vehicle. In: 4th European Automotive Simulation Conference (EASC), 2009-07-06 - 2009-07-07, Munich, Germany.

Lamond, Andrew and Kennedy, Johnathan J. and Stickland, M.T. (2009) An investigation into unsteady base bleed for drag reduction in bluff two-box SUVs. In: 4th European Automotive Simulation Conference, EASC 2009, 2009-07-06 - 2009-07-07, Munich, Germany.

Le, N.P.T. and Greenshields, C.J. and Reese, J.M. (2009) Numerical investigation of slip velocity and temperature jump boundary conditions in rarefied hypersonic flow. In: 3rd European Conference on Aero-Space Sciences, 2009-07-06 - 2009-07-09, Versailles, France.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2009) Loading on the Scapho-Trapezium-Trapezoid joint during gripping. In: 22nd Congress of the International Society of Biomechanics, 2009-07-05 - 2009-07-09, Cape Town, South Africa.

Maddock, Christie and Vasile, Massimiliano and Summerer, Leopold (2009) Conceptual design of a multi-mirror system for asteroid deflection. In: 27th International Symposium on Space Technology and Science, 2009-07-05 - 2009-07-12, Epochal Tsukuba.

Ahlin, G.A. and Brown, R.E. (2009) Wake structure and kinematics in the vortex ring state. Journal of the American Helicopter Society, 54 (3). 032003 1-18. ISSN 0002-8711

Bennet, Derek J. and McInnes, C.R. (2009) Verifiable control of a swarm of unmanned aerial vehicles. Journal of Aerospace Engineering, 223 (7). pp. 939-953. ISSN 0893-1321

Chen, Haofeng and Ponter, Alan R.S. (2009) Structural integrity assessment of superheater outlet penetration tubeplate. International Journal of Pressure Vessels and Piping, 86 (7). pp. 412-419. ISSN 0308-0161

Quail, Francis and Stickland, Matthew and Scanlon, Thomas (2009) Rapid manufacturing technique used in the development of a regenerative pump impeller. In: World congress on engineering 2009. Lecture Notes in Engineering and Computer Science, I & II . International Association of Engineers (IAENG), China, pp. 1730-1736. ISBN 978-988-17012-5-1

Tuohy, Paul (2009) Regulations and robust low-carbon buildings. Building Research and Information, 37 (4). pp. 433-445. ISSN 0961-3218

Biggs, James and Holderbaum, William (2009) Optimal kinematic control of an autonomous underwater vehicle. IEEE Transactions on Automatic Control, 54 (7). pp. 1623-1626. ISSN 0018-9286

Holderbaum, William and Biggs, J.D. (2009) Oriented vehicles travelling in spherical space. In: The 11th IASTED International Conference on Control and its Applications, 2009-07-13 - 2009-07-15, Cambridge, UK.

Madhlopa, A. and Johnstone, C. (2009) Numerical study of a passive solar still with separate condenser. Renewable Energy, 34 (7). pp. 1668-1677. ISSN 0960-1481

Oliveira, Monica and Pinho, F.T. and Poole, R.J. and Oliveira, P.J. and Alves, M.A. (2009) Purely elastic flow asymmetries in flow-focusing devices. Journal of Non-Newtonian Fluid Mechanics, 160 (1). pp. 31-39. ISSN 0377-0257

Phillips, C. and Brown, R.E. (2009) Eulerian simulation of the fluid dynamics of helicopter brownout. Journal of Aircraft, 46 (4). pp. 1416-1429. ISSN 0021-8669

Quail, F. and Stickland, M.T. and Scanlon, T.J. (2009) Rapid manufacturing technique used in the development of a regenerative pump impeller. In: World Congress on Engineering, 2009-07-01 - 2009-07-03, London, England.

Trendafilova, I. and Gorman, D.G. and Manoach, E. (2009) An investigation on vibration-based damage detection in circular plates. Structural Health Monitoring, 8 (4). pp. 291-302. ISSN 1475-9217

Williams, J.G. and Anley, R.E. and Nash, D.H. and Gray, T.G.F. (2009) Analysis of externally loaded bolted joints : analytical, computational and experimental study. International Journal of Pressure Vessels and Piping, 86 (7). pp. 420-427. ISSN 0308-0161

Ye, Z. and Tirovic, M. and Davies, M. and Baker, P.H. and Phillipson, M.C. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C. (2009) The testing of two methods for the moisture measurement of building fabrics via comparisons with data from an x-ray system. Building and Environment, 44 (7). pp. 1409-1417. ISSN 0360-1323

Alves, M.A. and Sousa, P.C. and Soulages, J. and McKinley, G.H. and Oliveira, Monica (2009) Purely-elastic flow asymetries in T-shaped microchannels. In: Congreso de Métodos Numéricos en Ingeniería, 2009-06-29 - 2009-07-02, Barcolona.

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Flow of a Newtonian and a shear-thinning viscoelastic fluid through 3D contractions : Experiments and simulations. In: Congreso de Métodos Numéricos en Ingeniería, 2009-06-29 - 2009-07-02, Barcolona.

Arlemark, E.J. and Reese, J.M. (2009) Investigating the effect of solid boundaries on the gas molecular mean-free-path. In: 7th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2009, 2009-06-22 - 2009-06-24, Pohang, South Korea.

Beveridge, Andrew J. and Wheel, M. and Nash, D.H. (2009) Computational modelling and experimental characterisation of heterogeneous materials. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23, Rome, Italy.

Biggs, J.D. and McInnes, C.R. (2009) An optimal gains matrix for time-delay feedback control. In: 2nd IFAC Conference on the Analysis and Control of Chaotic Systems (CHAOS 09), 2009-06-22 - 2009-06-24, London, England.

MacKenzie, D. and Li, Hongjun and Hamilton, R. (2009) Multiphysics models for friction stir welding simulation. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19, Crete, Greece.

Wood, J. and Alexander, L.A. and Taylor, I.J. (2009) An experimental and finite element study of the low-cycle fatigue failure of a galvanised steel lighting column. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19, Crete, Greece.

Clarke, J.A. and Conno, G. and Grant, A.D. and Johnstone, C. (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, 2009-05-31 - 2009-06-05, Hawaii, USA.

Clarke, J.A. and Connor, Gary and Grant, A.D. and Johnstone, C. (2009) Development and in-sea performance testing of a single point mooring supported contra-rotating tidal turbine. In: OMAE 2009. American Society of Mechanical Engineers, New York, pp. 1065-1073. ISBN 9780791843444

Clarke, J.A. and Johnstone, C. and Kim, J.M. and Tuohy, P.G. (2009) Energy, carbon and cost performance of building stocks : upgrade analysis, energy labelling and national policy development. In: Advances in building energy research. Advances in Building Energy Research, 3 . Earthscan Publications Ltd, London, pp. 1-20. ISBN 9781844075171

Abid, M. and Nash, D.H. (2009) Stamina of a non-gasketed flange joint under combined internal pressure, axial and bending loading: an experimental study. Journal of Pressure Vessel Technology, 131 (3). 031203-031210. ISSN 0094-9930

Biggs, James and McInnes, Colin (2009) Solar sail formation flying for deep-space remote sensing. Journal of Spacecraft and Rockets, 46 (3). pp. 670-678. ISSN 0022-4650

Madhlopa, A. and Johnstone, C. (2009) Model for computation of solar fraction in a single-slope solar still. Solar Energy, 83 (6). pp. 873-882. ISSN 0038-092X

Stack, M.M. and Abdelrahman, M. (2009) Some reflections on a model to predict the erosion rate of the passive film on pure metals. In: 13th International Conference on Aerospace Science and Aviation Technology, ASAT 2009, 2009-05-26 - 2009-05-28, Cairo, Egypt.

Fletcher, T.M. and Duraisamy, K. and Brown, R.E. (2009) Sensitivity of tail rotor noise to helicopter configuration in forward flight. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29, Texas, USA.

Kelly, M.E. and Brown, R.E. (2009) The effect of blade aerodynamic modelling on the prediction of high-frequency rotor airloads. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29, Texas, USA.

Kim, H.W. and Duraisamy, K. and Brown, R.E. (2009) Effect of rotor stiffness and lift offset on the aeroacoustics of a coaxial rotor in level flight. In: 65th American Helicopter Society Annual Forum, 2009-05-27 - 2009-05-29, Texas, USA.

Croisard, N. and Vasile, Massimiliano (2009) System engineering design optimisation under uncertainty for preliminary space mission. In: Proceedings of the IEEE Congress on Evolutionary Computation, 2009. (CEC '09). Congress on Evolutionary Computation, 1-5 . UNSPECIFIED, pp. 324-331. ISBN 978-1-4244-2958-5

Minisci, Edmondo and Avanzini, Giulio (2009) Orbit transfer maneouvres as a test benchmark for comparison metrics of evolutionary algorithms. In: IEEE Congress on Evolutionary Computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE Conference Proceedings, pp. 350-357.

Rahman, M. and Lim, J. and Hamilton, Robert and Comlekci, Tugrul (2009) Dynamic behaviour of portal frames at elevated temperature. In: Simulea Customer Conference, 2009-05-18 - 2009-05-21, London.

Vasile, Massimiliano and Minisci, Edmondo and Locatelli, M (2009) A dynamical system perspective on evolutionary heuristics applied to space trajectory optimization problems. In: 2009 IEEE Congress on evolutionary computation. IEEE Congress on Evolutionary Computation, 1-5 . IEEE Conference Proceedings, pp. 2340-2347. ISBN 9781424429585

Simo, J. and McInnes, C.R. (2009) Stabilization of displaced periodic orbits in the solar sail restricted three-body system. In: SIAM Conference on Applications of Dynamical Systems, 2009-05-17 - 2009-05-21, Snowbird, Utah.

Lockerby, D.A. and Reese, J.M. and Struchtrup, H. (2009) Switching criteria for hybrid rarefied gas flow solvers. Proceedings A: Mathematical, Physical and Engineering Sciences, 465 (2105). pp. 1581-1598. ISSN 1471-2946

Pan, Wenke and Boyle, J.T. and MacKenzie, D. (2009) Simulation of the small punch creep test with consideration of variation of material properties. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08, London, UK.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. and Hems, T. and Bransby-Zachary, M. (2009) Ulnar variance and load transfer in the forearm during maximal grip: a finite element study. In: Combined Scientific Meeting of the British and American Societies of Surgery of the Hand, 2009-04-30 - 2009-05-02, London, UK.

Mclaren, Andrew (2009) Approaches to the teaching of design : an engineering subject centre guide. Higher Education Academy, Loughborough University, Leicester. ISBN 978-1-904804-802

Thomason, J.L. and Ali, J.Z. (2009) The dimensional stability of glass-fibre reinforced Polyamide 66 during hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 40 (5). pp. 625-634. ISSN 1359-835X

Yun, Geun Young and Tuohy, P.G. and Steemers, K. (2009) Thermal performance of a naturally ventilated building using a combined algorithm of probabilistic occupant behaviour and deterministic heat and mass balance models. Energy and Buildings, 41 (5). pp. 489-499. ISSN 0378-7788

Zhang, Y.H. and Ozdemir, Pinar (2009) Microfluidic DNA amplification - a review. Analytica Chimica Acta, 638 (2). pp. 115-125. ISSN 0003-2670

Symington, Mark C. and Banks, W.M. and Opukuro, David West and Pethrick, R.A. (2009) Tensile testing of cellulose based natural fibers for structural composite applications. Composites Part A: Applied Science and Manufacturing, 43 (9). pp. 1083-1108. ISSN 1359-835X

Maddock, Christie and Vasile, M. and McInnes, C.R. and Radice, G. and Summerer, L. (2009) Designs of multi-spacecraft swarms for the deflection of apophis by solar sublimation. In: 1st IAA Planetary Defence Conference: Protecting Earth from Asteroids, 2009-04-27 - 2009-04-30, Granada, Spain.

Sousa, P.C. and Oliveira, Monica and Alves, M.A. (2009) Microfluidic rectifiers for viscoelastic fluid flow. In: 5th Annual European Rheology Conference, 2009-04-15 - 2009-04-17, Cardiff.

Sousa, P.C. and Pinho, I.S. and Abreu, A.R. and Gomes, L.F. and Santos, R.M. and Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2009) Flow of a blood analogue solution in a micro-geometry with a constriction. In: 5th Annual European Rheology Conference, 2009-04-15 - 2009-04-17, Cardiff.

Thomason, J.L. (2009) A physical approach to interfacial strength in natural fibre reinforced composites. In: 10th Deformation and Fracture of Composites (DFC 10) Conference, 2009-04-15 - 2009-04-17, Sheffield, UK. (Unpublished)

Yang, Liu and Thomason, James (2009) A comparison of glass fibre-polypropylene interface strength measured using the fibre pull-out and microdebond methods. In: 10th Deformation and Fracture of Composites (DFC 10) Conference, 2009-04-15 - 2009-04-17, Sheffield, UK. (Unpublished)

Beveridge, Andrew J. and Wheel, M. (2009) A control volume based formulation of the discrete Kirchoff triangular thin plate bending element. In: The 17th UK National Conference on Computational Mechanics in Engineering, 2009-04-06 - 2009-04-08, Nottingham, UK.

Novak, J. and Pearce, C. J. and Grassl, P. and Thomason, James and Yang, Liu (2009) Three-dimensional nonlinear finite element analysis of the microbond test. In: The 17th UK National Conference on Computational Mechanics in Engineering, 2009-04-06 - 2009-04-08, Nottingham, UK.

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2009) XPS and AFM study of the structure of hydrolysed aminosilane on e-glass surfaces. In: Silanes and Other Coupling Agents. Brill Academic Publishers. ISBN 9789004165915

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2009) The concentration of hydroxyl groups on glass surfaces and their effect on the structure of silane deposits. In: Silanes and Other Coupling Agents. Brill Academic Publishers. ISBN 9789004165915

Quail, Francis and Scanlon, T.J. and Stickland, M.T. (2009) Study of a regenerative pump using numerical and experimental techniques. In: 8th European Turbomachinery Conference, 2009-03-23 - 2009-03-27, Graz, Austria.

Fletcher, T.M. and Brown, R.E. and Kim, D.H. and Kwon, O.J. (2009) Predicting wind turbine blade loads using vorticity transport and RANS methodologies. In: European Wind Energy Conference and Exhibition, EWEC 2009, 2009-03-16 - 2009-03-19, Marseilles, France.

Oldroyd, A. and Hasager, C.B. and Stickland, M.T. and Mikkelsen, M. and Estanqueiro, A. (2009) Introducing EC FP7 Programme NORSEWInD-Northern Seas Index Database. In: European Wind Energy Conference and Exhibition, EWEC 2009, 2009-03-16 - 2009-03-19, Marseilles, France.

Carnelli, L. and Dachwald, B. and Vasile, Massimiliano (2009) Evolutionary neurocontrol: A novel method for low-thrust gravity-assist trajectory optimization. Journal of Guidance, Control and Dynamics, 32 (2). pp. 616-625. ISSN 0731-5090

Ferguson, A. and Kelly, N.J. and Weber, Andreas and Griffith, Brent (2009) Modelling residential-scale combustion-based cogeneration in building simulation. Journal of Building Performance Simulation, 2 (1). pp. 1-14. ISSN 1940-1493

Macpherson, G.B. and Nordin, N. and Weller, H.G. (2009) Particle tracking in unstructured, arbitrary polyhedral meshes for use in CFD and molecular dynamics. Communications in Numerical Methods in Engineering, 25 (3). pp. 263-273. ISSN 1069-8299

Kokogiannakis, G. (2009) Support for the integration of simulation in the European Energy Performance of Buildings Directive. PhD thesis, University Of Strathclyde.

Simo, Jules and McInnes, Colin (2009) Displaced periodic orbits with low-thrust propulsion in the Earth-Moon system. In: Spaceflight Mechanics. Advances in Astronautical Sciences, 134 . Univelt Inc, pp. 815-828. ISBN 978-0-87703-554-1

Thomason, J.L. (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 114-124. ISSN 1359-835X

Camilleri, Duncan and MacKenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). 011203-011208. ISSN 0094-9930

Ceriotti, M. and Vasile, M. and Giardini, G. and Massari, M. (2009) An approach to model interest for planetary rover through DSmT. Journal of Aerospace Computing, Information, and Communication, 6 (2). pp. 92-108. ISSN 1542-9423

Infield, D.G. and Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Kelly, N.J. (2009) UK microgeneration part I: policy and behavioural aspects. Proceedings of the ICE - Energy, 162 (1). pp. 23-36. ISSN 1751-4231

Kim, H.W. and Kenyon, A.R. and Duraisamy, K. and Brown, R.E. (2009) Interactional aerodynamics and acoustics of a hingeless coaxial helicopter with an auxiliary propeller in forward flight. Aeronautical Journal, 113 (1140). pp. 65-78. ISSN 0001-9240

Schütze, O. and Vasile, Massimiliano and Junge, O. and Delinitz, M. and Izzo, D. (2009) Designing optimal low-thrust gravity-assist trajectories using space-pruning and a multi-objective approach. Engineering Optimization, 41 (2). pp. 155-181. ISSN 0305-215X

Simo, Jules and McInnes, C.R. (2009) Displaced periodic orbits with low-thrust propulsion. In: 19th AAS/AIAA Space Flight Mechanics Meeting, 2009-02-08 - 2009-02-12, Georgia, USA.

Tang, G.H. and Zhang, Y.H. and Gu, X.J. and Barber, R.W. and Emerson, D.R. (2009) Lattice Boltzmann model for thermal transpiration. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 79 (2). 027701. ISSN 1063-651X

Yu, J. and Rossi, R. and Hale, C. and Goulding, D. and Dougan, G. (2009) Interaction of enteric bacterial pathogens with murine embryonic stem cells. Infection and Immunity, 77 (2). pp. 585-597. ISSN 0019-9567

Tang, G.H. and Zhang, Y.H. and Barber, R.W. and Gu, X.J. and Emerson, D.R. (2009) Modelling viscous fluid damping in oscillating microstructures. Modern Physics Letters B, 23 (3). pp. 241-244. ISSN 0217-9849

Fletcher, T.M. and Brown, R.E. (2009) Simulating wind turbine interactions using the vorticity transport equations. In: 28th ASME Wind Energy Symposium, 2009-01-05 - 2009-01-08, Orlando, Florida, USA.

Sanchez, J.P. and Colombo, C. and Vasile, M. and Radice, G. (2009) Multi-criteria comparison among several mitigation strategies for dangerous near Earth objects. Journal of Guidance, Control and Dynamics, 32 (1). pp. 121-142. ISSN 0731-5090

Kenyon, A.R. and Brown, R.E. (2009) Wake dynamics and rotor-fuselage aerodynamic interactions. Journal of the American Helicopter Society, 54 (1). 12003-1-12003-18. ISSN 0002-8711

Biggs, J.D. and McInnes, Colin (2009) Control of solar sail periodic orbits in the Elliptic Three-Body problem. Journal of Guidance, Control and Dynamics, 32 (1). pp. 318-320. ISSN 0731-5090

Israr, Asif and Cartmell, Matthew P. and Manoach, E. and Trendafilova, Irina and Ostachowicz, Wieslaw and Krawczuk, Marek and Zak, Arkadiusz (2009) Analytical modelling and vibration analysis of cracked rectangular plates with different loading and boundary conditions. Journal of Applied Mechanics, 76 (1). pp. 11005-11013. ISSN 0021-8936

Malinowski, P. and Wandowski, T. and Trendafilova, I. and Ostachowicz, W.M. (2009) A phased array-based method for damage detection and localization in thin plates. Structural Health Monitoring, 8 (1). pp. 5-15. ISSN 1475-9217

Portugues, I. and Moore, P.J. and Glover, I.A. and Johnstone, C. and McKosky, GM and Goff, M.B. and van de Zel, L. (2009) RF-based partial discharge early warning system for air-insulated substations. IEEE Transactions on Power Delivery, 24 (1). pp. 20-29. ISSN 0885-8977

Taylor, I.J. and Vezza, M. (2009) A numerical investigation into the aerodynamic characteristics and aeroelastic stability of a footbridge. Journal of Fluids and Structures, 25 (1). pp. 155-177. ISSN 0889-9746

Trendafilova, I.N. (2009) A review of the paper 'Some insights into the dynamics of defective structures' by J. A. Brandon. [Review]

Tuohy, P.G. and Humphreys, M.A. and Nicol, F. and Rijal, H.B. and Clarke, J.A. (2009) Occupant behaviour in naturally ventilated and hybrid buildings. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 115 (1). pp. 16-27. ISSN 0001-2505

Vasile, Massimiliano and Campagnola, Stefano (2009) Design of low-thrust gravity assist trajectories to Europa. JBIS, Journal of the British Interplanetary Society, 62 (1). pp. 15-31. ISSN 0007-084X

Baker, P.H. and Galbraith, G.H. and McLean, R.C. (2009) Temperature gradient effects on moisture transport in porous building materials. Building Services Engineering Research and Technology, 30 (1). pp. 37-48. ISSN 0143-6244

Counsell, John M. and Haughton-Brown, Chris and Tuff, Simon (2009) Renewable power for lean desktops in media applications. In: IBC 2009 Conference, 2009-09-10 - 2009-09-15, Amsterdam.

Lee, E.J. and Pae, M.H. and Kim, D.H. and Kim, Jae Min and Kim, J.Y. (2009) Literature review of technologies and energy feedback measures impacting on the reduction of building energy consumption. In: Proceedings of EU-Korea Conference on Science and Technology. Proceedings in Physics, 124 . Springer, pp. 223-228. ISBN 978-3-540-85189-9

Stack, M.M. (2009) Tribology matters. UK Power and Process Engineering (1). p. 33.

Vasile, Massimiliano and Minisci, Edmondo (2009) Memetic strategies for global trajectory optimisation. In: Advances in Computation and Intelligence. Lecture Notes in Computer Science, 5821 . Springer-Verlag Berlin, Berlin, pp. 180-190. ISBN 978-3-642-04842-5

Vasile, M. and Ceriotti, M. (2009) Automatic goal allocation for a planetary rover with DSmT. In: Advances and Applications of DSmT for Information Fusion (Collected Works). American Research Press, FIZ Karlsruhe GmbH, pp. 387-409. ISBN 978-1-59973-073-8

Vasile, Massimiliano (2009) Hybrid behavioural-based multi-objective space trajectory optimization. In: Multi-Objective Memetic Algorithms. Studies in Computational Intelligence, 171 . UNSPECIFIED, pp. 231-253. ISBN 978-3-540-88050-9

Vasile, Massimiliano (2009) A memetic multi-agent collaboration search for space trajectory optimization. International Journal of Bio-inspired Computation, 1 (3). pp. 186-197. ISSN 1758-0366

Mabrouk, Mohamed M. and McInnes, C.R. (2008) Solving the potential field local minimum problem using internal agent states. Robots and Autonomous Systems, 56 (12). pp. 1050-1060. ISSN 0921-8890

McInnes, C.R. and Gorman, D.G. and Cartmell, M.P. (2008) Enhanced vibrational energy harvesting using non-linear stochastic resonance. Journal of Sound and Vibration, 318 (4-5). pp. 655-662. ISSN 0022-460X

Arlemark, E.J. and Dadzie, S.K. and Reese, J.M. (2008) A Navier-Stokes model incorporating the effects of near-wall molecular collisions with applications to micro gas flows. In: 1st European Conference on Microfluidics, Microflu'08, 2008-12-10 - 2008-12-12, Bologna, Italy.

Thomason, James (2008) Natural fibre composites. In: Mechanics of Materials and Structures and Bioengineering, Autumn Day Event, 2008-12-10 - 2008-12-10, Glasgow. (Unpublished)

Biggs, James and Holderbaum, William (2008) Planning rigid body motions using elastic curves. Mathematics of Control, Signals, and Systems, 20 (4). pp. 351-367. ISSN 0932-4194

Clarke, Joseph and Johnstone, Cameron and Kelly, Nicolas and Strachan, Paul and Tuohy, Paul Gerard (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Energy Policy, 36 (12). pp. 4605-4609. ISSN 0301-4215

Kokogiannakis, G. and Strachan, P.A. and Clarke, J.A. (2008) Comparison of the simplified methods of the ISO 13790 Standard and detailed modelling programs in a regulatory context. Journal of Building Performance Simulation, 1 (4). pp. 209-219. ISSN 1940-1493

Kummert, M. and Bernier, M. (2008) Analysis of a combined photovoltaic-geothermal gas-fired absorption heat pump system in a Canadian climate. Journal of Building Performance Simulation, 1 (4). pp. 245-256. ISSN 1940-1493

Taylor, I.J. and Vezza, M. and Salisbury, I. (2008) Numerical investigation of the effects of pedestrian barriers on aeroelastic stability of a proposed footbridge. Journal of Wind Engineering and Industrial Aerodynamics, 96 (12). pp. 2418-2437. ISSN 0167-6105

Burt, G.M. and Elders, I.M. and Galloway, S.J. and Kelly, N.J. and Tumilty, R.M. (2008) Assessment of highly distributed power systems using an integrated simulation approach. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7). pp. 657-668. ISSN 0957-6509

Kelly, N.J. and Clarke, J.A. and Ferguson, A. and Burt, G. (2008) Developing and testing a generic micro-combined heat and power model for simulations of dwellings and highly distributed power systems. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (7). pp. 685-695. ISSN 0957-6509

Baig, Shahid and McInnes, Colin R. (2008) Artificial three-body equilibria for hybrid low-thrust propulsion. Journal of Guidance, Control and Dynamics, 31 (6). pp. 1644-1655. ISSN 0731-5090

Oliveira, Monica and Rodd, Lucy E. and McKinley, G.H. (2008) Simulations of extensional flow in microrheometric devices. Microfluidics and Nanofluidics, 5 (6). pp. 809-826. ISSN 1613-4982

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced Polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (11). pp. 1732-1738. ISSN 1359-835X

Dadzie, S.K. and Reese, J.M. and McInnes, C.R. (2008) A continuum model of gas flows with localized density variations. Physica A: Statistical Mechanics and its Applications, 387 (24). pp. 6079-6094. ISSN 0378-4371

Vasile, Massimiliano and Minisci, Edmondo and Locatelli, M (2008) Testing approaches for global optimization of space trajectories. In: 3rd International Conference on Bioinspired Optimization Methods and their ApplicationsBIOMA 2008, 2008-10-13 - 2008-10-14, Ljubljiana.

Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Potential field based navigation for planetary rovers using internal states. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Uchiyama, K. and McInnes, C.R. (2008) Analytical control laws for interplanetary solar sail trajectories with constraints. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. and Ordonez-Sanchez, S. (2008) A contra-rotating marine current turbine on a flexible mooring : development of a scaled prototype. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17, Brest, France.

Clarke, J.A. and Johnstone, C. and Kelly, N.J. and Strachan, Paul and Tuohy, P.G. (2008) The role of built environment energy efficiency in a sustainable UK energy economy. Other. Office of Science and Innovation, London.

Connor, G. and Grant, A.D. and Johnstone, C.M. (2008) Development of a European tidal energy road map. In: 2nd International Conference on Ocean Energy, 2008-10-15 - 2008-10-17, Brest, France. (Unpublished)

Ingram, David M. and Villate, José Luis and Abonnel, Cyrille and Johnstone, Cameron (2008) The development of protocols for equitable testing and evaluation in ocean energy. International Journal of Fluid Machinery and Systems, 1 (1). pp. 33-37. ISSN 1882-9554

Mabrouk, Mohamed M. and McInnes, C.R. (2008) An emergent wall following behaviour to escape local minima for swarms of agents. International Journal of Computer Science, 35 (4). IJCS-35. ISSN 1819-656X

Radice, G. and Vasile, Massimiliano (2008) Activities of the advanced space research team at the University of Glasgow. JBIS, Journal of the British Interplanetary Society, 61 (10). pp. 404-411. ISSN 0007-084X

Simo, J. and McInnes, C.R. (2008) Solar sail trajectories at the Earth-Moon Lagrange points. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Thomason, J.L. (2008) The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 39 (10). pp. 1618-1624. ISSN 1359-835X

Badawy, Ahmed and McInnes, C.R. (2008) Spacecraft formation-flying using potential functions. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Colombo, C. and Vasile, M. and Radice, G. (2008) Interception and deviation of near Earth objects via solar collector strategy. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Maddock, Christie and Vasile, Massimiliano (2008) Extension of the proximity-quotient control law for low-trust propulsion. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Minisci, Edmondo and Avanzini, Giulio (2008) Comparative study on the application of evolutionary optimization techniques to orbit transfer manoeuvres. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Sanchez Cuartielles, Joan-Pau and Vasile, M. and Radice, G. (2008) On the consequences of a fragmentation due to a NEO mitigation strategy. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Fletcher, T.M. and Duraisamy, K. and Brown, R.E. (2008) Aeroacoustic analysis of main rotor-tail rotor interaction. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19, Liverpool, UK.

Kelly, Mary E. and Brown, R.E. (2008) Predicting the wake structure of the HART II rotor using the vorticity transport model. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19, Liverpool, UK.

Phillips, C. and Brown, R.E. (2008) The effect of helicopter configuration on the fluid dynamics of brownout. In: 34th European Rotorcraft Forum, 2008-09-16 - 2008-09-19, Liverpool, UK.

Schütze, Oliver and Vasile, Massimiliano and Coello Coello, Carlos A. (2008) Approximate solutions in space mission design. In: Proceedings of the 10th international conference on Parallel Problem Solving from Nature. Lecture Notes in Computer Science, 5199 . Springer-Verlag Berlin, Berlin, pp. 805-814. ISBN 9783540876991

Abdel Wahid, Mohamed Hussien Mabrouk and Murray, Craig W. and Johnstone, Kevin and McInnes, C.R. (2008) Internal agent states: experiments using the swarm leader concept. In: Towards Autonomous Robotic Systems (TAROS 08), 2008-09-01 - 2008-09-03, Edinburgh, Scotland.

Arebi, B. and Dempster, W.M. (2008) Bubble formation at two adjacent submerged orifices in inviscid fluids. Journal of Engineering Research, 10. pp. 33-48. ISSN 1726-6009

Bennet, Derek J. and McInnes, C.R. (2008) Spacecraft formation flying using bifurcating potential fields. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Biggs, J.D. and McInnes, C.R. and Waters, T. (2008) Stabilizing periodic orbits above the elliptic plane in the solar sail 3-body problem. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

MacKenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2008) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. Thin-Walled Structures, 46 (7-9). pp. 963-974. ISSN 0263-8231

Wheel, M.A. (2008) A control volume-based finite element method for plane micropolar elasticity. International Journal for Numerical Methods in Engineering, 75 (8). pp. 992-1006. ISSN 0029-5981

Manoach, Emil and Trendafilova, I. (2008) Large amplitude vibrations and damage detection of rectangular plates. Journal of Sound and Vibration, 315 (3). pp. 591-606. ISSN 0022-460X

Tang, G.H. and Gu, X.J. and Barber, R.W. and Emerson, D.R. and Zhang, Y.H. (2008) Lattice Boltzmann simulation of nonequilibrium effects in oscillatory gas flow. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 78 (2). 026706-026714. ISSN 1063-651X

Tang, G.H. and Zhang, Y.H. and Gu, X.J. and Emerson, D.R. (2008) Lattice Boltzmann modelling Knudsen layer effect in non-equilibrium flows. EPL: A Letters Journal Exploring the Frontiers of Physics, 83 (4). pp. 40008-40014. ISSN 0295-5075

Vasile, Massimiliano and Maddock, Christie and Radice, G. (2008) Mirror formation control in the vicinity of an asteroid. In: AIAA/AAS Astrodynamics Specialist Conference 2008, 2008-08-18 - 2008-08-21, Hawaii.

Vasile, Massimiliano and Minisci, Edmondo and Locatelli, M (2008) On testing global optimization algorithms for space trajectory design. In: AIAA/AAS Astrodynamics Specialist Conference 2008, 2008-08-18 - 2008-08-21, Hawaii.

Oliveira, Monica and Pinho, F.T. and Alves, M.A. (2008) Extensional effects in viscoelastic fluid flow through micro-scale double cross-slot. In: Proceedings of the XV International Congress on Rheology. UNSPECIFIED, California, p. 276.

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2008) Viscoelastic fluid flow through 3D square-square expansions. In: Proceedings of the XV International Congress on Rheology, ICR2008. UNSPECIFIED, California.

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2008) Viscoelastic fluid flow through 3D square-square expansions. In: XVth International Congress on Rheology, 2008-08-03 - 2008-08-08, Monterey, California.

Abid, M. and Awan, A.W. and Nash, D.H. (2008) Stamina of a non-gasketed flange joint under combined internal pressure and axial loading. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222 (E3). pp. 143-155. ISSN 0954-4089

Kim, H.W. and Brown, R.E. (2008) Modelling the aerodynamics of coaxial helicopters - from an isolated rotor to a complete aircraft. In: EKC 2008 - Proceedings of the EU-Korea Conference on Science & Technology. Springer Proceedings in Physics, 124 (XII). Springer Verlag, Germany, pp. 45-59. ISBN 978-3-540-85189-9

Pan, W. and Qin, Yi and Law, F. and Ma, Y. and Brockett, A. and Juster, N.P. (2008) Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming. International Journal of Advanced Manufacturing Technology, 38 (3-4). pp. 393-401. ISSN 0268-3768

McInnes, C.R. and Abdel Wahid, Mohamed Hussien Mabrouk (2008) Non-linear stability of vortex formation in swarms of interacting particles. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 78 (012903). ISSN 1063-651X

Tuohy, Paul Gerard (2008) Air-conditioning : the impact of UK regulations, the risks of unnecessary air-conditioning and a capability index for non-air-conditioned naturally ventilated buildings. In: 2008 Windsor Conference, 2008-07-27 - 2008-07-29, London.

Arlemark, E.J. and Dadzie, S.K. and Reese, J.M. (2008) An extension to the Navier-Stokes-Fourier equations by considering molecular collisions with boundaries. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 95-102. ISBN 978-0-7918-4834-0

Borg, M.K. and Reese, J.M. (2008) A hybrid particle-continuum framework. In: Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 995-1004. ISBN 978-0-7918-4834-0

Macpherson, G.B. and Reese, J.M. (2008) Molecular dynamics for fluid mechanics in arbitrary geometries. In: ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, pp. 969-976. ISBN 978-0-7918-4834-0

Kim, H.W. and Kenyon, A.R. and Duraisamy, K. and Brown, R.E. (2008) Interactional aerodynamics and acoustics of a hingeless coaxial helicopter with an auxiliary propeller in forward flight. In: 9th International Powered Lift Conference, IPLC2008, 2008-07-22 - 2008-07-24, London, UK.

McCombes, Tom and Johnstone, C.M. and Grant, A.D. (2008) Unsteady hydrodynamic modelling of rotor systems used in marine current turbines. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK. (Unpublished)

Ete, A. and Hoffheinz, G. and Kelly, N.J. and Ulleberg, O. (2008) Hydrogen energy systems: development and application of modelling tools. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK.

Dadzie, S.K. and Reese, Jason M. (2008) The concept of mass-density in classical thermodynamics and the Boltzmann kinetic equation for dilute gases. In: Proceedings of the 26th International Symposium on Rarified Gas Dynamics. American Institute of Physics. ISBN 978-0-7354-0615-5

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. and Ordonez-Sanchez, S. (2008) Contra-rotating marine current turbines : performance in field trials and power train developments. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK.

Clarke, Joseph (2008) Computational tools for low energy building design : capabilities and requirements. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK.

Counsell, John and Khalid, Yousaf Ali (2008) Controllability of modern commercial buildings. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK. (Unpublished)

Madhlopa, A. and Johnstone, C.M. (2008) Preliminary results from the testing of an advanced passive solar still incorporating a shielded condenser. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK.

Robertson, A.C. and Taylor, I.J. (2008) Numerical simulation of rivulet evolution on a circular cylinder in an airflow. In: 8th UK Conference on Wind Engineering, 2008-07-14 - 2008-07-16, Surrey, UK.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. Journal of Biomechanics, 41. S147-S147. ISSN 0021-9290

Robertson, A.C. and Taylor, I.J. and Wilson, S.K. and Duffy, B.R. and Sullivan, J.M. (2008) A model for the numerical simulation of rivulet evolution on a circular cylinder in an air flow. In: Flow-induced vibration. The Academy of Sciences of the Czech Republic, Prague, pp. 693-698. ISBN 9788087012123

Srinivasa Pai, P. and Mathew, M.T. and Stack, M.M. and Rocha, L.A. (2008) Some thoughts on neural network modelling of micro-abrasion-corrosion processes. Tribology International, 41 (7). pp. 672-681. ISSN 0301679X

Biggs, J.D. and McInnes, C. and Waters, Thomas (2008) New periodic orbits in the solar sail restricted three body problem. In: 2nd Conference on Nonlinear Science and Complexity, 2008-07-28 - 2008-07-31, Porto, Portugal.

Clarke, J.A. and Hong, J. and Johnstone, C.M. and Kim, J.M. (2008) The application of demand-side management via internet-enabled monitoring and control. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK. (Unpublished)

Clarke, J.A. and Johnstone, C.M. and Kim, J.M. and Kokogiannakis, G. and Strachan, P.A. and Woo, K. and Kang, B. (2008) Study of the energy performance of Korean apartment buildings with alternative balcony configurations. In: 10th World Renewable Energy Congress, 2008-07-19 - 2008-07-25, Glasgow, UK. (Unpublished)

Dadzie, S.K. (2008) Conditions aux limites dans un gaz raréfié: loi de réflexion à la paroi, saut de température, vitesse de glissement, couche de Knudsen Boundary conditions in rarefied gas flows: scattering kernal, temperature jump, slip velocity, Knudsen layer problem. PhD thesis, Edilivre Universitaire.

Gorman, Daniel G. and Trendafilova, Irina and Mulholland, Anthony J. and Horáček, Jaromir (2008) Vibration analysis of a circular plate in interaction with an acoustic cavity leading to extraction of structural modal parameters. Thin-Walled Structures, 46 (7-9). pp. 878-886. ISSN 0263-8231

Nash, D.H. (2008) Introduction - Professor Jim Rhodes, Founding Editor. Thin-Walled Structures, 46 (7-9). p. 703. ISSN 0263-8231

Stack, M.M. and Sundararajan, G. and Roy, M. (2008) Tribo-Corrosion 2006 - a passage to India to celebrate the 1st International Conference on Tribo-Corrosion. Tribology International, 41 (7). pp. 571-572. ISSN 0301679X

Trendafilova, I. and Manoach, Emil (2008) Vibration-based damage detection in plates by using time series analysis. Mechanical Systems and Signal Processing, 22 (5). pp. 1092-1106. ISSN 0888-3270

Vasile, M. and Colombo, C. (2008) Optimal impact strategies for asteroid deflection. Journal of Guidance, Control and Dynamics, 31 (4). pp. 858-872. ISSN 0731-5090

Waters, Thomas J. and McInnes, Colin R. (2008) Solar sail dynamics in the three-body problem: homoclinic paths of points and orbits. International Journal of Non-Linear Mechanics, 43 (6). pp. 490-496. ISSN 0020-7462

Chernyshenko, S.I. and Castro, I.P. and Hetsch, T. and Iollo, A. and Minisci, Edmondo and Savelsberg, R. (2008) Vortex cell shape optimization for separation control. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04, Venice.

Colombo, Camilla and Vasile, Massimiliano and Radice, G. (2008) An algorithm based on differential dynamic programming for low-thrust trajectories. In: New Trends in Astrodynamics and Applications V, 2008-06-30 - 2008-07-02, Milan.

Lockerby, Duncan A. and Reese, Jason (2008) A simple method for capturing some complex physics of gas flows in MEMS. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04, Venice. (Unpublished)

Abdel Wahid, Mohamed Hussien Mabrouk and McInnes, C.R. (2008) Using internal states and swarming behaviours to enhance the performance of swarm robots. In: Bridging the Gap, University of Strathclyde Research Day, BTG 2008, 2008-06-28, Glasgow.

Minisci, Edmondo and Avanzini, Giulio and D'Angelo, S. and Dutto, M. (2008) Multi-objective design of robust flight control systems. In: Mathematical Problems in Engineering, Aerospace and Sciences, ICPAA 2008, 2008-06-25 - 2008-06-27, Genoa.

Clive, P.J.M. and Chindurza, I. and Ravey, I. and Bass, J. and Boyle, R.J. and Jones, P. and Lang, S.J. and Bradley, S. and Hay, L. and Oldroyd, A. and Stickland, M.T. (2008) The Myres Hill remote sensing intercomparison study: preliminary results. In: 14th International Symposium for the Advancement of Boundary Layer Remote Sensing, 2008-06-23 - 2008-06-25, Technical University of Denmark, Copenhagen.

Camilleri, D. and Gray, T.G.F. and Nash, D.H. (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076

Trendafilova, I. and Cartmell, M. and Ostachowicz, W. (2008) Vibration-based damage detection in an aircraft wing scaled model using principal component analysis and pattern recognition. Journal of Sound and Vibration, 313 (3-5). pp. 560-566. ISSN 0022-460X

Oliveira, Monica (2008) Microfluidics and its applications in extensional rheology. In: RheoProcessing 2008 - Multiscale Rheology and Polymer Processing, 2008-06-12 - 2008-06-14, Minho, Guimarães.

Tang, G.H. and Zhang, Y.H. and Barber, R.W. and Emerson, D.R. (2008) Lattice Boltzmann simulation of viscous gas damping in microstructures. In: 2nd International Symposium on Physics of Fluids, 2008-06-06 - 2008-06-09, Nanjing, China. (Unpublished)

David-West, O.S. and Symington, Mark C. and Pethrick, R.A. and Banks, W.M. and Thomason, J.L. (2008) Mechanical testing of natural fibre reinforced polyester resin composites and Mode 1 fracture toughness testing of resin blocks. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Symington, Mark C. and David-West, Opukuro S. and Banks, W.M. and Thomason, J.L. and Pethrick, Richard A. (2008) Vacuum infusion of natural fibre composites for structural applications. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Symington, Mark C. and David-West, Opukuro S. and Banks, William M. and Thomason, J.L. and Pethrick, Richard A. (2008) The effect of alkalisation on the mechanical properties of natural fibres. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Thomason, J.L. (2008) Anisotropy of reinforcement fibres and its influence on the apparent interfacial shear strength in thermoplastic composites. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Thomason, J.L. (2008) Understanding the impact performance of injection moulded long fibre reinforced polyamide. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Wang, C.C. and Thomason, James and Jones, F.R. (2008) The investigation of fibre reinforcement effects in thermoplastic materials: interfacial bond strength and fibre end parameter. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Grant, Andrew and Johnstone, Cameron and Kelly, Nick (2008) Urban wind energy conversion: the potential of ducted turbines. Renewable Energy, 33 (6). pp. 1157-1163. ISSN 0960-1481

Lockerby, Duncan A. and Reese, Jason M. (2008) On the modelling of isothermal gas flows at the microscale. Journal of Fluid Mechanics, 604. pp. 235-261. ISSN 0022-1120

Rijal, H.B. and Tuohy, P.G. and Nicol, J.F. and Humphreys, M.A. and Samuel, A.A.A. and Clarke, J.A. (2008) Development of adaptive algorithms for the operation of windows, fans and doors to predict thermal comfort and energy use in Pakistani buildings. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 114 (2). pp. 555-573. ISSN 0001-2505

Duraisamy, K. and Brown, R.E. (2008) Aerodynamic response of a hovering rotor to ramp change in pitch input. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01, Montréal, Canada.

Phillips, C. and Brown, R.E. (2008) Eulerian simulation of the fluid dynamics of helicopter brownout. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01, Montréal, Canada.

Dempster, W.M. and Elmayyah, W. (2008) A computational fluid dynamics evaluation of a pneumatic safety relief valve. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 2008-05-27 - 2008-05-29, Cairo, Egypt.

Pan, W. and Qin, Y. (2008) FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models. Journal of Materials Processing Technology, 201 (1-3). pp. 220-225. ISSN 0924-0136

Clarke, J.A. and Ghauri, S. and Johnstone, C. and Kim, J.M. and Tuohy, P.G. (2008) The EDEM methodology for housing upgrade analysis, carbon and energy labelling and national policy development. In: eSim 2008, 2008-05-20 - 2008-05-23, Quebec, Canada.

Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion-cogeneration. In: The Canadian Building Simulation Conference, eSim 2008, 2008-05-20 - 2008-05-22, Quebec City, Canada.

Thomason, J.L. (2008) Structure-performance relationships of thermoplastic composites for automotive applications. In: 14th Rolduc Polymer Meeting "From Commodity Plastics to Speciality Polymers ?", 2008-05-18 - 2008-05-21, Kerkrade, The Netherlands.

Naruse, T. and MacKenzie, D. (2008) Design analysis of ductile failure in dovetail connections. Journal of Strain Analysis for Engineering Design, 43 (5). pp. 295-306. ISSN 0309-3247

Abdel Wahid, M.H.M. and McInnes, C.R. (2008) Social potential model to simulate emergent behaviour for swarm robots. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 2008-05-27 - 2008-05-29, Cairo, Egypt.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2008) An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact. Composite Structures, 83 (3). pp. 247-258. ISSN 0263-8223

Kelly, Nick and Galloway, Stuart and Elders, Ian and Tumilty, Ryan and Burt, Graeme (2008) Modelling the impact of micro generation on the electrical distribution system. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01, Ottawa, Canada.

Le Feuvre, P. and Kummert, M. (2008) Ground source heat pumps in the UK - market status and evaluation. In: 9th IEA Heat Pump Conference 2008, 2008-05-20 - 2008-05-22, Zurich, Switzerland.

Reese, J.M. and Emerson, D. and Clare, H. (2008) Guest editorial article: special issue on micro- and nanoscale flows: advancing the engineering science and design. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (5). i-ii. ISSN 0954-4062

Thomason, J.L. (2008) Natural fibre reinforced polypropylene. In: Research Seminar, National Centre for Prosthetics and Orthotics, 2008-05-01, Glasgow, Scotland.

Waters, Thomas J. and McInnes, Colin R. (2008) Invariant manifolds and orbit control in the solar sail three-body problem. Journal of Guidance, Control and Dynamics, 31 (3). pp. 554-562. ISSN 0731-5090

Wood, J. (2008) A review of literature for the structural assessment of mitred bends. International Journal of Pressure Vessels and Piping, 85 (5). pp. 275-294. ISSN 0308-0161

Beyer, Denny and Kelly, Nick (2008) Modelling the behaviour of domestic micro-cogeneration under different operating regimes and with variable thermal buffering. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01, Ottawa, Canada.

Kelly, Nick and Ferguson, Alex and Griffith, Brent and Weber, Andreas (2008) The development of a generic systems-level model for combustion-based domestic cogeneration. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01, Ottawa, Canada.

Kim, H.W. and Duraisamy, K. and Brown, R.E. (2008) Aeroacoustics of a coaxial rotor in level flight. In: 64th American Helicopter Society Annual Forum, 2008-04-28 - 2008-05-01, Montréal, Canada.

Peeters, L. and Kelly, N.J. and D'Haeseleer, W. (2008) Thermal comfort in residential buildings with water based heating systems: a tool for selecting appropriate heat emitters when using µ-cogeneration. In: Micro-Cogen 2008, 1st International Conference on Micro-Cogeneration Technologies and Applications, 2008-04-29 - 2008-05-01, Ottawa, Canada.

Bennet, Derek J. and McInnes, C.R. (2008) Pattern transition in spacecraft formation flying via the artificial potential field method and bifurcation theory. In: 3rd International Symposium on Formation Flying, Missions and Technologies, 2008-04-23 - 2008-04-25, Noordwijk, The Netherlands.

Gislason, M.K. and Nash, D.H. (2008) Using finite element method in preoperative planning for wrist surgery. In: Engineering the Upper Limb: Patient Specific Surgical Planning and Implementation, 2008-04-23 - 2008-04-24, London, UK.

Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. WEAR, 264 (9-10). pp. 826-837. ISSN 0043-1648

Fletcher, T.M. and Brown, R.E. (2008) Main rotor-tail rotor intraction and its implications for helicopter directional control. Journal of the American Helicopter Society, 53 (2). pp. 125-138. ISSN 0002-8711

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2008) XPS and AFM study of interaction of organosilane and sizing with e-glass fibre surface. Journal of Adhesion, 84 (4). pp. 322-338. ISSN 0021-8464

Maddock, Christie and Vasile, Massimiliano (2008) Design of optimal spacecraft-asteroid formations through a hybrid global optimization approach. International Journal of Intelligent Computing and Cybernetics, 1 (2). pp. 239-268. ISSN 1756-378X

McInnes, C.R. and Waters, T.J. (2008) Reconfiguring smart structures using phase space connections. Smart Materials and Structures, 17 (025030). ISSN 0964-1726

Strachan, Paul and Kokogiannakis, Georgios and Macdonald, Iain (2008) History and development of validation with the ESP-r simulation program. Building and Environment, 43 (4). pp. 601-609. ISSN 0360-1323

Oliveira, Monica and Pinho, F.T. and Poole, R.J. and Oliveira, P.J. and Alves, M.A. (2008) Purely-elastic flow asymmetries in flow-focusing devices. In: Complex Flows of Complex Fluids, 2008-03-17 - 2008-03-19, Cambridge, Massachussets.

Madhlopa, A. and Johnstone, C. (2008) Potential for water distillation by using solar energy in Malawi. Environment and Health International, 10 (2). pp. 51-53. ISSN 0726-9210

David-West, O.S. and Alexander, N.V. and Nash, D.H. and Banks, W.M. (2008) Energy absorption and bending stiffness in CFRP laminates: the effect of 45º plies. Thin-Walled Structures, 46 (7-9). pp. 860-869. ISSN 0263-8231

O'Hare, Lynne and Scanlon, Thomas and Emerson, David and Reese, Jason (2008) Evaluating constitutive scaling models for application to compressible microflows. International Journal of Heat and Mass Transfer, 51 (5-6). pp. 1281-1292. ISSN 0017-9310

Mizzi, S. and Gu, X.J. and Emerson, D.R. and Barber, R.W. and Reese, J.M. (2008) Computational framework for the regularized 20-moment equations for non-equilibrium gas flows. International Journal for Numerical Methods in Fluids, 56 (8). pp. 1433-1439. ISSN 0271-2091

Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). 011202-011210. ISSN 0094-9930

Mathew, M.T. and Matijevic, B. and Stack, M.M. and Rocha, L.A. and Ariza, E. (2008) Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. Tribology International, 41 (2). pp. 141-149. ISSN 0301-679X

Strachan, P.A. and Baker, P.H. (2008) Outdoor testing, analysis and modelling of building components. Building and Environment, 43 (2). pp. 127-128. ISSN 0360-1323

Strachan, P.A. (2008) Simulation support for performance assessment of building components. Building and Environment, 43 (2). pp. 228-236. ISSN 0360-1323

Strachan, P.A. and Vandaele, L. (2008) Case studies of outdoor testing and analysis of building components. Building and Environment, 43 (2). pp. 129-142. ISSN 0360-1323

Kelly, Mary E and Duraisamy, Karthikeyan and Brown, R.E. (2008) Predicting blade vortex interaction, airloads and acoustics using the vorticity transport model. In: 9th American Helicopter Society Aeromechanics Specialists' Meeting, 2008-01-23 - 2008-01-25, San Francisco, California.

Kim, H.W. and Kenyon, A.R. and Duraisamy, K. and Brown, R.E. (2008) Interactional aerodynamics and acoustics of a propeller-augmented compound coaxial helicopter. In: 9th American Helicopter Society Aeromechanics Specialists' Meeting, 2008-01-23 - 2008-01-25, San Francisco, California.

Samuel, Aizaz Aamir and Strachan, Paul (2008) Integration of network flow modelling and computational fluid dynamics to simulate contaminant transport and behaviour in the indoor environment. In: ASHRAE Winter Meeting, 2008-01-19 - 2008-01-23, New York.

Mizzi, S. and Gu, X.J. and Emerson, D.R. and Barber, R.W. and Reese, J.M. (2008) Application of a high-order macroscopic approach to a force-driven Poiseuille flow in the slip and transition regimes. In: Proceedings of the Micro/Nanoscale Heat Transfer International Conference (MNHT2008). ASME. ISBN 0791838137

Tang, G.H. and Gu, X.J. and Zhang, Y. and Reese, J.M. and Barber, R.W. and Emerson, D.R. (2008) Pulsating electroosmotic flow and wall block mixing in microchannels. In: Proceedings of MNHT2008, Micro/Nanoscale Heat Transfer International Conference. ASME.

Badawy, Ahmed and McInnes, Colin (2008) On-orbit assembly using superquadric potential fields. Journal of Guidance, Control and Dynamics, 31 (1). pp. 30-43. ISSN 0731-5090

Bookless, John and McInnes, Colin (2008) Control of Lagrange point orbits using solar sail propulsion. Acta Astronautica, 62 (2-3). pp. 159-176. ISSN 0094-5765

MacKenzie, P.M. and Forrester, M.A. (2008) Sailboat propeller drag. Ocean Engineering, 35 (1). pp. 28-40. ISSN 0029-8018

Macpherson, Graham B. and Reese, Jason M. (2008) Molecular dynamics in arbitrary geometries: parallel evaluation of pair forces. Molecular Simulation, 34 (1). pp. 97-115. ISSN 0892-7022

Rijal, H.B. and Tuohy, P.G. and Nicol, J.F. and Humphreys, M.A. and Samuel, A.A.A. and Clarke, J.A. (2008) Development of an adaptive window-opening algorithm to predict the thermal comfort, energy use and overheating in buildings. Journal of Building Performance Simulation, 1 (1). pp. 17-30. ISSN 1940-1493

Samuel, Aizaz Aamir and Strachan, Paul (2008) Integration of network flow modelling and computational fluid dynamics to simulate contaminant transport and behaviour in the indoor environment. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 114. pp. 250-258. ISSN 0001-2505

Thomason, J.L. (2008) Anisotropy of reinforcement fibres and interface strength in thermoplastic composites. In: Gordon Conference on Composites, 2008-01-13 - 2008-01-18, Ventura, California.

Bergman, N. and Hawkes, A. and Brett, D.J.L. and Baker, P. and Barton, J. and Blanchard, R. and Brandon, N.P. and Infield, D.G. and Jardine, C. and Kelly, N.J. and Leach, M.O. and Matian, M. and Peacock, A.D. and Staffell, I. and Sudtharalingam, S. and Woodman, B. (2008) Review of UK microgeneration. Part 1: Policy and behavioural aspects. Proceedings of the ICE - Civil Engineering, Paper 800 (ENO). pp. 1-14. ISSN 0965-089X

Biggs, J.D. and Holderbaum, William (2008) Integrable Hamiltonian systems defined on the Lie groups SO(3) and SU(2): an application to the attitude control of a spacecraft. In: 5th Wismar Symposium on Automatic Control, AUTSYM'08, 2008-09-18 - 2008-09-19, Wismar, Germany.

Boyle, James and McCartney, Elspeth and O'Hare, A. and Forbes, J. (2008) Predictors of responsivity to language intervention: findings from a RCT. In: 2008 British Psychological Society Developmental Section Annual Conference, 2008-09-01 - 2008-09-03, Oxford Brooks University.

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18, Sheffield, UK.

Crawley, Drury B. and Hand, Jon W. and Kummert, Michael and Griffith, Brent T. (2008) Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43 (4). pp. 661-673. ISSN 0360-1323

Doo, G.H. and Dempster, W.M. and McNaught, J.M. and , DTI (Funder) and , EPSRC (Funder) and , TUVNEL (Funder) and , Hyprotech UK Ltd (now Aspen Technology Inc.) (Funder) (2008) Improved prediction of shell side heat transfer in horizontal evaporative shell and tube heat exchangers. Heat Transfer Engineering, 29 (12). pp. 999-1007. ISSN 0145-7632

Ferguson, A. and Kelly, N.J. and Griffith, Brent and Weber, Andreas (2008) Calibration and validation of a combustion cogeneration model. In: eSim 2008: 5th IBPSA - Canada Conference, 2008-05-21 - 2008-05-22, Quebec City, Canada.

Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2008) Mars and moon exploration passing through the european precision landing GNC test facility. Acta Astronautica, 63 (1-4). pp. 74-90. ISSN 0094-5765

Hand, J. and Crawley, D.B. and Donn, M. and Lawrie, L.K. (2008) Improving non-geometric data available to simulation programs. Building and Environment, 43 (4). pp. 674-685. ISSN 0360-1323

Kummert, M. (2008) Feasiblity of a hybrid CHP/GSHP system for the Tynecastle stadium. Case study. University of Strathclyde.

Kummert, M. (2008) A combined PV-geothermal absorption heat pump system for space conditioning and domestic hot water heating. Other. University of Strathclyde.

Kummert, M. and , Scottish Energy Systems Group (SESG) (Funder) (2008) Optimising system performance of hybrid systems. In: Electric Heating: Yesterday's Villain Tomorrow's Saviour?, 2008-04-17, Glasgow, Scotland. (Unpublished)

Kummert, Michael and Bernier, Michel (2008) Sub-hourly simulation of residential ground coupled heat pump systems. Building Services Engineering Research and Technology, 29 (1). pp. 27-44. ISSN 0143-6244

Li, Z. Y. and Wilcoxon, J. P. and Yin, F. and Chen, Y. and Palmer, R. E. and Johnston, R. L. and Chen, Yu (2008) Structures and optical properties of 4-5 nm bimetallic AgAu nanoparticles. Faraday Discussions, 138. pp. 363-373. ISSN 1359-6640

Mabrouk, Mohammed H. and McInnes, Colin R. (2008) Wall following to escape local minima for swarms of agents using internal states and emergent behaviour. In: Proceedings of the World Congress on Engineering 2008. International Association of Engineers (IAENG), pp. 24-31. ISBN 978-988-98671-9-5

Macdonald, Martin and Rhodes, James and Heiyantuduwa, M.A. (2008) Recent developments in the design of cold-formed steel members and structures. Thin-Walled Structures, 46 (7-9). pp. 1047-1053. ISSN 0263-8231

Macpherson, Graham Bruce (2008) Molecular Dynamics Simulation in Arbitrary Geometries for Nanoscale Fluid Mechanics. PhD thesis, University Of Strathclyde.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2008) Modelling a Nitinol device for the repair of abdominal aortic aneurysms. In: Proceedings of the ASM International Conference on Shape Memory and Superelastic Technologies, 2006-05-07 - 2006-05-11, Pacific Grove, California, USA.

McElroy, L.B. and Cockroft, J. and Hand, J. (2008) Business success through process based application of simulation. In: Proceedings of Building Simulation Conference 2007. International Building Performance Simulation Association, pp. 1740-1747. ISBN 978-0-9771706-3-0

Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2008) Procedural influences on non-linear distortions in welded thin-plate fabrication. Thin-Walled Structures, 46 (7-9). pp. 1021-1034. ISSN 0263-8231

Nash, David H. (2008) UK Rules For Unfired Pressure Vessels. In: The Companion Guide to ASME Boiler and Pressure Vessel Code. ASME, Chapter 51. ISBN 9780971902717

Park, H.S. and Kim, Jae Min and Kim, J.Y. (2008) Development of and research on energy-saving buildings in Korea. In: EKC2008: Proceedings of the EU-Korea conference on science and technology. Proceedings in Physics, 124 . Springer, Berlin, pp. 287-296. ISBN 9783540851899

Phillipson, M.C. and Baker, P.H. and Davies, M. and Ye, Z. and Galbraith, G.H. and McLean, R.C. (2008) Suitability of time domain reflectometry for monitoring moisture in building materials. Building Services Engineering Research and Technology, 29 (3). pp. 261-272. ISSN 0143-6244

Radice, G. and Macdonald, M. (2008) Collision and evaporation avoidance for spacecraft formation. In: 59th International Astronautical Congress, 2008-09-29 - 2008-10-03, Glasgow, Scotland.

Rhodes, J. (2008) Professor Jim Rhodes. Thin-Walled Structures, 46 (7-9). pp. 704-705. ISSN 0263-8231

Scanlon, T.J. and O'Hare, L. (2008) A continuum model for rarefied microchannel gas flows. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Vasile, M. and Ceriotti, M. and Radice, G. and Becerra, V.M. and Nasuto, S.J. and Anderson, J.D. (2008) Global trajectory optimisation: can we prune the solution space when considering deep space manoeuvres? [Report]

Zhang, Y.H. and Gu, X.J. and Barber, R.W. and Emerson, D.R. (2008) A thermal lattice Boltzmann model for micro/nano-flows. In: Proceedings of Micro/Nanoscale Heat Transfer International Conference (MNHT2008). ASME, pp. 1275-1281. ISBN 0791842924

Zhang, Y.H. and Tang, Gu and Emerson, D.R. (2008) Lattice Boltzmann models for nonequilibrium gas flows. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 77 (4). 046701-046707. ISSN 1063-651X

Robertson, A.C. and Taylor, I.J. (2007) Investigating the addition and oscillation of artificial rivulets to stay cables using a discrete vortex method. In: 7th International Symposium on Cable Dynamics, 2007-12-10 - 2007-12-13, Vienna, Austria. (Unpublished)

Macpherson, G.B. and Borg, M.K. and Reese, J.M. (2007) Generation of initial molecular dynamics configurations in arbitrary geometries and in parallel. Molecular Simulation, 33 (15). pp. 1199-1212. ISSN 0892-7022

McCummiskey, E. and Dempster, W.M. and Nash, D.H. (2007) The effect of variance in input parameters for Nitinol constitutive models in FE analysis. In: International Conference on Shape Memory and Superelastic Technologies, 2007-12-03 - 2007-12-05, Tsukuba City, Japan. (Unpublished)

Gorman, D.G. and Trendafilova, I. and Mulholland, A.J. and Horáček, J. (2007) Analytical modelling and extraction of the modal behaviour of a cantilever beam in fluid interaction. Journal of Sound and Vibration, 308 (1-2). pp. 231-245. ISSN 0022-460X

Sousa, P.C. and Coelho, P.M. and Oliveira, Monica and Alves, M.A. (2007) Viscoelastic fluid flow in three-dimensional square-square contractions. In: AICHE Annual Meeting, 2007-11-04 - 2007-11-09, Salt Lake City, Utah.

Badawy, Ahmed (2007) On-Orbit Manoeuvring Using Superquadric Potential Fields. PhD thesis, University Of Strathclyde.

Beausoleil-Morrison, I. and Kelly, N.J. (2007) Specifications for modelling fuel cell and combustion-based residential cogeneration device within whole-building simulation programs. [Report]

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2007) Computational methods and experimental validation of welding distortion models. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (4). pp. 235-249. ISSN 1464-4207

Johnstone, C. (2007) Development and testing of an innovative turbine for harnessing power from the tides. In: 9th Asian International Conference on Fluid Machinery, 2007-10-16 - 2007-10-19, Jeju, Korea. (Unpublished)

Macdonald, M. and Rhodes, J. and Kotelko, M. (2007) Stainless steel stub columns subject to combined bending and axial loading. Thin-Walled Structures, 45 (10-11). pp. 893-897. ISSN 0263-8231

Rhodes, J. (2007) Some recent research on thin-walled members at the university of strathclyde. Thin-Walled Structures, 45 (10-11). pp. 821-826. ISSN 0263-8231

Becerra, V.M. and Nasuto, S.J. and Anderson, J.D. and Ceriotti, M. and Bombardelli, C. (2007) Search space pruning and global optimization of multiple gravity assist trajectories with deep space manoeuvers. In: IEEE Congress on Evolutionary Computation (CEC), 2007-09-25 - 2007-09-28, Singapore.

Maddock, Christie and Vasile, Massimiliano (2007) Optimal design for a NEO tracking spacecraft formation. In: IEEE Congress on Evolutionary Computing. IEEE Conference Proceedings, Paper 1728. ISBN 978-1-4244-1339-3

Ceriotti, M. and Colombo, C. and Croisard, N. and McLean, T. (2007) Preliminary mission analysis for the ESMO mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28, Hyderabad, India.

Ceriotti, M. and Vasile, M. and Bombardelli, C. (2007) An incremental algorithm for fast optimisation of multiple gravity assist trajectories. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28, Hyderabad, India.

Colombo, C. and Novak, D. and Heiligers, J. (2007) Low-thrust trajectories design for the European student moon orbiter mission. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28, Hyderabad, India.

Clarke, J.A. and Kelly, N.J. and Tang, D. (2007) A review of ESP-r's flexible solution approach and its application to prospective technical domain developments. Advances in Building Energy Research, 1 (1). pp. 227-247.

Clarke, J.A. and Hong, Jun and Johnstone, C. and Kelly, N.J. (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building Simulation. Springer Verlag, Germany, pp. 1654-1660. ISBN 1996-3599

Clarke, J.A. and Hong, Jun and Johnstone, C. and Kelly, N.J. (2007) The role of DSM + C to facilitate the integration of renewable energy and low carbon energy technologies. In: Building simulation 2007 proceedings. Tsinghua University Press, Beijing, pp. 1653-1660. ISBN 9780977170630

Bernier, M. and Kummert, M. and Bertagnolio, S. (2007) Development and application of test cases for comparing vertical ground heat exchanger models. In: International Building Performance Simulation Association (IBPSA) Conference 2007, 2007-09-03 - 2007-09-06, Beijing, China.

Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. (2007) Performance evaluation of a dual contra rotating rotor tidal turbine. In: 7th European Wave and Tidal Energy Conference, 2007-09-11 - 2007-09-14, Porto, Portugal.

Greenshields, Christopher and Reese, Jason M. (2007) The structure of shock waves as a test of Brenner's modifications to the Navier-Stokes equations. Journal of Fluid Mechanics, 580. pp. 407-429. ISSN 0022-1120

Kummert, M. and Bernier, M. and Costa, J. and Paris, J. (2007) A comparison between geothermal absorption and compression heat pumps for space conditioning. International Journal of Environmental Studies, 64 (4). pp. 467-487. ISSN 0020-7233

Biggs, James D. and Holderbaum, William (2007) Integrating Hamiltonian systems defined on the Lie groups SO(4) and SO(1,3). In: The 45th European Control Conference (ECC '07), 2007-07-02 - 2007-07-05, Kos, Greece.

Badawy, Ahmed and McInnes, Colin (2007) Robot motion planning using hyperboloid potential functions. In: World Congress on Engineering 2007, 2007-07-02 - 2007-07-04, London, UK.

Robertson, A.C. and Taylor, I.J. (2007) Effect of rivulets on a circular cylinder using a 2D discrete vortex method. In: 12th International Conference on Wind Engineering, 2007-07-01 - 2007-07-06, Cairns, Australia. (Unpublished)

Taylor, I.J. and Vezza, M. (2007) An investigation into the aerolastic stability of a footbridge using proper orthogonal decomposition analysis. In: 12th International Conference on Wind Engineering, 2007-07-01 - 2007-07-06, Cairns, Australia.

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089

David-West, O.S. and Nash, D.H. and Banks, W.M. and , ISOPE (2007) An experimental study of the response of composite pipes under impact loading. In: Proceedings of the 17th (2007) international offshore and polar engineering conference. ISOPE, California, USA, pp. 3492-3497. ISBN 1880653680

Liu, X.M. and Jones, F.R. and Thomason, J.L. (2007) An XPS study of organosilane and sizing adsorption on e-glass fibre surface. In: Proceedings of the Sixteenth International Conference on Composite Materials (ICCM-16). Japan Society of Composite Materials.

Macdonald, M. and Hughes, G.W. and McInnes, C.R. and Lyngvi, A. and Falkner, P. and Atzei, A. (2007) GeoSail: an elegant solar sail demonstration mission. Journal of Spacecraft and Rockets, 44 (4). pp. 784-796. ISSN 0022-4650

Rijal, H.B. and Tuohy, P.G. and Humphreys, M.A. and Nicol, J.F. and Samuel, A.A.A. and Clarke, J.A. (2007) Using results from field surveys to predict the effect of open windows on thermal comfort and energy use in buildings. Energy and Buildings, 39 (7). pp. 823-836. ISSN 0378-7788

Thomason, J.L. (2007) Editorial preface. Composite Interfaces - Zeist, 14 (4). pp. 281-284. ISSN 0927-6440

Vasile, M. and Ceriotti, M. and De Pascale, P. (2007) An incremental approach to the solution of global trajectory optimization problems. In: Advances in Global Optimization: Methods and Applications, 2007-06-13 - 2007-06-17, Mykonos, Greece.

Pogula, Suvarchala Devi and Patwardhan, Siddharth V. and Perry, Carole C. and Gillespie, John W. and Yarlagadda, Shridhar and Kiick, Kristi L. (2007) Continuous silica coatings on glass fibers via bioinspired approaches. Langmuir, 23 (12). pp. 6677-6683. ISSN 0743-7463

Biggs, James D. and Holderbaum, William (2007) Singularities of optimal control problems on some six dimensional Lie groups. IEEE Transactions on Automatic Control, 52 (6). pp. 1027-1038. ISSN 0018-9286

McKay, S. (2007) Desk top display. WO/2004/086771.

Vasile, Massimiliano and De Pascale, Paolo and Casotto, Stefano (2007) On the optimility of a shape-based approach based on pseudo-equinoctial elements. Acta Astronautica, 61 (1-6). pp. 286-297. ISSN 0094-5765

Badawy, Ahmed and McInnes, C.R. (2007) Free flyer manoeuvring round a space station. In: ASAT 12, 2007-05-29 - 2007-05-31, Cairo, Egypt.

Pang, Y. and Spathopoulos, M.P. and Xia, H. (2007) Reachability and optimal control for linear hybrid automata: a quantifier elimination approach. International Journal of Control, 80 (5). pp. 731-748. ISSN 0020-7179

Li, Y. and Wilson, J.A. and Craven, A.J. and Mitchell, P.S. and Crowther, D. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure. Materials Science and Technology, 23 (5). pp. 509-518. ISSN 0267-0836

Mabrouk, Mohamed M. and McInnes, C.R. (2007) Swarm robot social potential fields with internal agent dynamics. In: 12th International Conference on Aerospace Sciences and Aviation Technology, ASAT-12, 2007-05-29 - 2007-05-31, Cairo, Egypt.

Thomason, J.L. (2007) Structure-property relationships in glass reinforced polyamide, part 2: The effects of average fiber diameter and diameter distribution. Polymer Composites, 28 (3). pp. 331-343. ISSN 0272-8397

Thomason, J.L. (2007) Structure-property relationships in glass-reinforced polyamide, Part 3: Effects of hydrolysis ageing on the dimensional stability and performance of short glass-fiber-reinforced polyamide 66. Polymer Composites, 28 (3). pp. 344-354. ISSN 0272-8397

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, 23 (5). pp. 519-527. ISSN 0267-0836

Flannigan, A. and Offord, S.J.J. and Orr, S.W. and Wheel, M. (2007) Mechanical testing of wood-glass composite mast sections. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (2). pp. 45-52. ISSN 1464-4207

Jones, F.R. and Liu, X.M. and Thomason, J.L. (2007) The differential adsorption of silanes from solution onto model E-glass surfaces using high resolution XPS. In: Silanes and Other Coupling Agents. VSP International Science Publishers, pp. 29-37. ISBN 978-9067-64452-5

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2007) The interaction of amino and glycidyl silanes with E-glass surfaces. In: Silanes and other coupling agents. VSP. ISBN 978-9067-64452-5

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2007) Differentiation of silane adsorption onto model E-glass surfaces from mixed solutions of amino and glycidyl silanes. In: Silanes and Other Coupling Agents. VSP International Science Publishers, pp. 17-28. ISBN 978-9067-64452-5

Lorentzon, U. and Bolmsjo, G. and Doyle, M.J. and Carus, D. (2007) MAGIC-HAND: A bottle and jar opening machine for people with severe disabilities. Mechatronics, 6 (2). pp. 79-88. ISSN 0957-4158

Madhlopa, A. and Ngwalo, G. (2007) Solar dryer with thermal storage and biomass-backup heater. Solar Energy, 81 (4). pp. 449-462. ISSN 0038-092X

Comlekci, T. and MacKenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Gray, T.G.F. and Wood, J. (2007) Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 433-446. ISSN 0309-3247

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C.M. (2007) Design and initial testing of a contra-rotating tidal current turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). pp. 171-179. ISSN 0957-6509

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. (2007) Design and testing of a contra-rotating tidal current turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (A2). pp. 171-179. ISSN 0957-6509

Wood, J. (2007) Stresses in the vicinity of an un-reinforced mitre intersection: an experimental and finite element comparison. Journal of Strain Analysis for Engineering Design, 42 (5). pp. 325-335. ISSN 0309-3247

Sanchez Cuartielles, J.P. and Colombo, C. and Vasile, M. and Radice, G. (2007) A multi-criteria assessment of deflection methods for dangerous NEOs. In: New Trends in Astrodynamics and Applications III. AIP Conference Proceedings, 886 (1). American Institute of Physics/Springer Verlag, New York, pp. 317-336. ISBN 978-0-7354-0389-5

Loutzenhiser, P.G. and Manz, H. and Felsmann, C. and Strachan, P.A. and Maxwell, G.M. (2007) An empirical validation of modelling solar gain through a glazing unit with external and internal shading screens. Applied Thermal Engineering, 27 (2-3). pp. 528-538. ISSN 1359-4311

McConnell, B.K. and Banks, W.M. and Doyle, G.T. and Hayward, D. and Pethrick, R.A. (2007) Ageing in non isothermal environments of adhesively bonded metal structures. In: 30th Annual Meeting of the Adhesion Society, 2007-02-01 - 2007-02-01, Tampa Bay.

O'Hare, Lynne and Lockerby, Duncan A. and Reese, Jason and Emerson, David (2007) Near-wall effects in rarefied gas micro-flows : Some modern hydrodynamic approaches. International Journal of Heat and Fluid Flow, 28 (1). pp. 37-43. ISSN 0142-727X

McIvor, A.J. and Johnston, R. (2007) Miner's lung : a history of coal dust disease in Britain. Studies in Labour History . Ashgate. ISBN 0754636739

Ceriotti, M. and Croisard, N. and Vasile, M. (2007) A non-deterministic planner for planetary rovers. In: International Joint Conference on Artificial Intelligence (IJCAI), 2007-01-06 - 2007-01-12, Hyderabad, India.

Croisard, N. and Ceriotti, M. and Vasile, M. (2007) Uncertainty modelling in reliable preliminary space mission design. In: International Joint Conference on AI (IJCAI), 2007-01-06 - 2007-01-12, Hyderabad, India.

Stickland, M.T. and Scanlon, T.J. and MacKenzie, John (2007) An experimental investigation of natural convection with solidification in a differentially heated cavity. International Journal of Heat and Mass Transfer, 50 (1-2). pp. 36-44. ISSN 0017-9310

Thomason, J.L. (2007) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. Interface strength and fibre strain in injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 38 (1). pp. 210-216. ISSN 1359-835X

Affrossman, S. and Banks, W.M. and Comrie, R. and Hayward, D. and Pethrick, R.A. (2007) Dielectric analysis of ageing structural adhesives. In: Proceedings of the 30th Annual Meeting of the Adhesion Society. Adhesion Society.

Baker, P.H. and Bailly, D. and Campbell, M. and Galbraith, G.H. and McLean, R.C. and Poffa, N. and Sanders, C.H. (2007) The application of x-ray absorption to building moisture transport studies. Measurement, 40 (9-10). pp. 951-959. ISSN 0263-2241

Banks, W.M. and Hayward, D. and Pethrick, R.A. (2007) Non destructive examination of composite structures using dielectric examination. In: 16th International Conference on Composite Materials, 2011-07-20, Kyoto.

Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D. and Pham, X.P. (2007) Investigation into wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). pp. 233-242. ISSN 0957-6509

Camilleri, D. and Naruse, T. and MacKenzie, D. (2007) Gross plastic deformation of a hemispherical head with cylindrical nozzle: a comparative study. In: Pressure Vessel Technologies for the Power and Process Industries (PVP2007/CREEP8), 2007-07-01, San Antonio, Texas.

Camilleri, D. and Naruse, T. and MacKenzie, D. (2007) An investigation of allowable static loads calculated by design by analysis. In: Proceedings of the ASME Pressure Vessels and Piping Conference. ASME. ISBN 0791842800

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. and MacKenzie, D. (2007) Development of a contra-rotating tidal current turbine and analysis of performance. In: Proceedings of the 7th european wave and tidal energy conference. EWTEC, Southampton. ISBN 9789899507937

Clarke, J.A. and Hand, J. and Kim, J.M. and Prazeres, L.M.R. (2007) Delivering building simulation information via new communication media. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

Clarke, J.A. and Johnstone, C.M. and Hong, J. and Kim, J.M. and Strachan, P.A. and Hwang, I. and Li, H. (2007) A multi-criteria performance study of an integrated demand/supply energy system for low and zero carbon technologies within domestic building design. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

Clarke, J.A. and Johnstone, C.M. and Kim, J.M. and Tuohy, P.G. (2007) Energy and carbon performance of housing : upgrade analysis, energy labelling and national policy development. In: Scottish Energy Systems Group Conference, 2007-07-03, Glasgow.

Dachwald, B. and Macdonald, M. and McInnes, C.R. (2007) Impact of optical degredation on solar sail mission performance. Journal of Spacecraft and Rockets, 44 (4). pp. 740-749. ISSN 0022-4650

Dachwald, B. and Mengali, G. and Quarta, A.A. and Macdonald, M. and McInnes, C.R. (2007) Optical solar sail degradation modelling. In: 1st International Symposium on Solar Sailing (ISSS 2007), 2007-06-27 - 2007-06-29, Herrsching, Germany. (Unpublished)

David-West, O.S. and Nash, D.H. and Banks, W.M. (2007) A study of repeated impact loading on a symmetrical carbon fibre laminate. In: 16th International Conference on Composite Materials, 2011-07-20, Kyoto.

Gabrowska, Joanna and Palacz, Magdalena and Krawczuk, Marek and Ostachovicz, Wieslaw and Trendafilova, Irina and Manoach, Emil and Cartmell, Matthew P. (2007) Wavelet analysis for damage indentification in composite materials. Key Engineering Materials, 347. pp. 253-261. ISSN 1013-9826

Gislason, M.K. and Kanellopoulos, A. and Barnes, R. and Nash, D.H. (2007) The effect of anatomical variations on the load transfer characteristics of the wrist during gripping. In: XI Congress of the Federation of the European Societies for Surgery of the Hand, 2006-06-28 - 2006-06-30, Glasgow, Scotland.

Gislason, M.K. and Nash, D.H. (2007) On the creation of a subject specific finite element model of the wrist joint. In: Proceedings of the 2007 Summer Workshop of the European Society of Biomechanics. Dublin: Trinity Centre for Bioengineering, pp. 122-124. ISBN 0-9548583-1-X

Gorman, D. and Horáček, J. (2007) Analysis of the free vibration of a coupled plate/fluid interacting system and interpretation using sub-system modal energy. Engineering Structures, 29 (5). pp. 754-762. ISSN 0141-0296

Greenshields, C.J. and Reese, J.M. (2007) The structure of hypersonic shock waves using Navier-Stokes equations modified to include mass diffusion. In: 2nd European Conference on Aero-Space Sciences (EUCASS). Von Karman Institute.

Guizzo, G.P. and Bertoli, A. and Torre, A.D. and Magistrati, G. and Mailland, F. and Vukman, A. and Philippe, C. and Jurado, M.M. and Ori, G.G. and Macdonald, M. and Romberg, O. and Dedei, S. and Zaccariotto, M. (2007) Testing GNC technologies for planetary landing on Mars and Moon analogues. In: 2nd International Workshop on Exploring Mars and its Earth Analogues, 2007-06-01, Trento, Italy.

Heim, D. and Klemmer, P. and Strachan, P.A. (2007) The effect of external surface properties on the thermal behaviour of a transparently insulated wall. In: Proceedings of Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing, China.

Heiyantuduwa, M.A. and Kotelko, M. and Rhodes, James and Macdonald, Martin (2007) Plastic mechanism approach to web crippling behaviour of cold-formed channel section beams. In: 6th International Conference on Steel and Aluminium Structures, ICSAS 07, 2007-07-18, Oxford.

Heiyantuduwa, M.A. and Macdonald, Martin and Rhodes, James (2007) Web crippling behaviour of thin-walled flexural members - an experimental investigation. In: 6th International Conference on Steel and Aluminium Structures, ICSAS 07, 2007-07-18, Oxford.

Johnstone, C. and Wallace, R. (2007) Guest editorial article. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). i-iii. ISSN 0957-6509

Kokogiannakis, G. and Clarke, J.A. and Strachan, P.A. (2007) Impact of using different models in practice - a case study with the simplified methods of ISO 13790 standard and detailed modelling programs. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

Kokogiannakis, G. and Strachan, P.A. (2007) Modelling of double ventilated facades according to CEN Standard 13790 method and detailed simulation. In: Proceedings of Building Low Energy Cooling and Advanced Ventilation Technologies in the 21st century, 2nd PALENC Conference and 28th AIVC Conference. Heliotopos Conferences. ISBN 978-960-6746-02-4

Kotelko, M. and Kowal-Michalska, K. and Rhodes, J. (2007) Stability of structures. Thin-Walled Structures, 45 (10-11). p. 809. ISSN 0263-8231

Kummert, M. and Dempster, W.M. (2007) Norwich Union Data Centre 3 - Transient thermal analysis of the chilled water hydraulic network and the impact of chilled water temperature disturbances on the IT environment. [Report]

Lappas, V. and Wie, B. and McInnes, C.R. and Tarabini, L. and Wallace, K. (2007) Microsolar sails for Earth magnetotail monitoring. Journal of Spacecraft and Rockets, 44 (4). pp. 840-848. ISSN 0022-4650

Li, Hongjun and Johnston, Richard and MacKenzie, Donald (2007) Effect of autofrettage in the thick-walled cylinder with a radial cross-bore. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. ASME, pp. 11-17. ISBN 0-7918-4283-5

Li, Hongjun and MacKenzie, Donald (2007) Coupled thermo-mechanical modelling of friction stir welding. In: Proceedings of the 2007 ASME Pressure Vessels and Piping Conference. Proceedings of the ASME Pressure Vesels and Piping Conference, 5 . American Society of Mechanical Engineers, New York, pp. 193-201. ISBN 9780791842836

Lockerby, D.A. and Reese, J.M. (2007) Near-wall scaling of the Navier-Stokes constitutive relations of accurate micro gas flow simulations. In: 5th International Conference on Nanochannels, Microchannels and Minichannels, 2007-06-18 - 2007-06-20, Puebla.

Lockerby, D.A. and Struchtrup, H. and Reese, J.M. (2007) High-order switching criteria for hybrid continuum-molecular micro gas flow solvers. In: 16th Discrete Simulation of Fluid Dynamics Meeting: Micro, Nano and Multiscale Physics for Emerging Technologies, 2007-07-01, Banff, Canada.

Loutzenhiser, P.G. and Manz, H. and Felsmann, C. and Strachan, P.A. and Frank, T. and Maxwell, G.M. (2007) Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation. Solar Energy, 81 (2). pp. 254-267. ISSN 0038-092X

Mabrouk, Mohamed M. and McInnes, C.R. (2007) Swarm potential fields with internal agent states and collective behaviour. In: Proceedings of the 10th British Conference on Mobile Robotics, Towards Autonomous Robotic Systems Conference, TAROS2007. Elsevier Science, pp. 90-96.

MacKenzie, P.M. (2007) Moiré interferometry applied to fracture in titanium tubes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 221 (3). pp. 131-141. ISSN 1464-4207

MacKenzie, P.M. and Walker, C.A. and McKelvie, J.K. (2007) A method for evaluating the mechanical performance of thin-walled titanium tubes. Thin-Walled Structures, 45 (4). pp. 400-406. ISSN 0263-8231

MacLeod, N.A. and Fowler, N.K. and Nash, D.H. (2007) Kinematic response of the wrist and forearm when subjected to a complex loading regime. In: Proceedings of the Fifth IASTED International Conference on Biomedical Engineering. Acta Press, pp. 244-248. ISBN 978-0-88986-648-5

Macdonald, I. and Clarke, J.A. (2007) Applying uncertainty considerations to energy conservation equations. Energy and Buildings, 39 (9). pp. 1019-1026. ISSN 0378-7788

Macdonald, M. and McInnes, C.R. and Dachwald, B. (2007) Heliocentric solar sail orbit transfers with locally optimal control laws. Journal of Spacecraft and Rockets, 44 (1). pp. 273-276. ISSN 0022-4650

Macdonald, Martin and Rhodes, James and Heiyantuduwa, M.A. (2007) Investigation of web crippling behaviour of thin-walled lipped channel beam members. In: 3rd International Conference on Structural Engineering, Mechanics and Computation, 2007-07-06, Cape Town.

Macpherson, G.B. and Reese, J.M. (2007) Parallel evaluation of pair forces for molecular dynamics in arbitrary geometries. In: 10th NSTI Nanotech Conference, 2007-05-01, Santa Clara, California.

Maddock, Christie and Sanchez Cuartielles, Joan-Pau and Vasile, Massimiliano and Radice, G. (2007) Comparison of single and multi-spacecraft configurations for NEA deflection by solar sublimation. In: New trends in Astrodynamics and Applications III. American Institute of Physics, pp. 303-316. ISBN 9780935403895

Malinowski, P. and Wandowski, T. and Trendafilova, I. and Ostachowicz, W.M. (2007) Multi-phased array for damage localisation. Key Engineering Materials, 347. pp. 77-82. ISSN 1013-9826

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2007) The determination and evaluation of Nitinol constitutive models for finite element analysis. Applied Mechanics and Materials, 7-8. pp. 81-88. ISSN 1660-9336

McInnes, C.R. (2007) Near Earth object modification using gravitational coupling. Journal of Guidance, Control and Dynamics, 30 (3). pp. 870-873. ISSN 0731-5090

McInnes, C.R. (2007) Vortex formation in swarms of interacting particles. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 75 (3). 032904-032907. ISSN 1063-651X

McLean, R.C. and Danert, K. and Morrison, S.J. and Galbraith, G.H. (2007) Hot occupational exposures: a corrected maximum exposure period to allow for sweating onset. Building Services Engineering Research and Technology, 28 (2). pp. 183-188. ISSN 0143-6244

Mizzi, S. and Barber, R.W. and Emerson, D.R. and Reese, J.M. and Stefanov, S. (2007) A phenomenological and extended continuum approach for modelling non-equilibrium flows. Continuum Mechanics and Thermodynamics, 19 (5). pp. 273-283. ISSN 0935-1175

Mizzi, S. and Emerson, D.R. and Stefanov, S. and Barber, R.W. and Reese, J.M. (2007) Effects of rarefaction on cavity flow in the slip regime. Journal of Computational and Theoretical Nanoscience, 4 (4). pp. 817-822. ISSN 1546-1955

Mohr, S. and Zhang, Y.H. and Macaskill, A. and Day, P.J.R. and Barber, R.W. and Goddard, N.J. and Emerson, D.R. and Fielden, P.R. (2007) Numerical and experimental study of a droplet-based PCR chip. Microfluidics and Nanofluidics, 3 (5). pp. 611-621. ISSN 1613-4982

Mridha, S. and Baker, T.N. (2007) Incorporation of 3 μm SiCp into Titanium surfaces using a 2.8 kW laser beam of 186 and 373 MJ m-2 energy densities in a nitrogen environment. Journal of Materials Processing Technology, 185 (1-3). pp. 38-45. ISSN 0924-0136

O'Hare, L. and Reese, J.M. (2007) Numerical models of gas flow and heat transfer in microscale channels: capturing rarefaction behaviour using a constitutive scaling approach. In: 5th International Conference on Nanochannels, Microchannels and Minichannels, 2007-06-18 - 2007-06-20, Puebla.

Osman, M. and Engler, O. and Karhausen, K. and Löchte, L. and McLaren, A.J. (2007) Effect of homogenisation conditions on recrystallisation in the Al-Mg-Mn alloy AA5454. Materials Science and Technology, 23 (6). pp. 688-698. ISSN 0267-0836

Ponter, Alan R.S. and Chen, Haofeng (2007) Modelling of the behaviour of a welded joint subjected to reverse bending moment at high temperature. Journal of Pressure Vessel Technology, 129 (2). pp. 254-261. ISSN 0094-9930

Prazeres, L.M.R. and Clarke, J.A. and Hand, J. and Kim, J.M. (2007) Delivering building simulation information via new communication media. In: Building simulation 2007 proceedings. Tsinghua University Press, Beijing. ISBN 9780977170630

Reese, J.M. (2007) Beyond Navier-Stokes: constructing hydrodynamic models to capture unusual rarefied gas flow phenomena. In: 6th International Congress on Industrial and Applied Mathematics, 2007-07-01, Zurich, Switzerland.

Reese, J.M. and Zheng, Y. and Lockerby, D.A. (2007) Computing the near-wall region in gas micro- and nanofluidics: critical Knudsen layer phenomena. Journal of Computational and Theoretical Nanoscience, 4 (4). pp. 807-813. ISSN 1546-1955

Reid, J. and Macdonald, M. and Milic, E. and Ortega, G. and Blasco, A. (2007) Development of an end-to-end simulation for re-usable launch vehicle. In: 58th International Astronautical Congress, 2007-09-24 - 2007-09-28, Hyderabad, India.

Rhodes, James and Macdonald, Martin and Heiyantuduwa, M.A. (2007) Developments in the design of cold-formed steel members and structures. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26, Glasgow.

Riga, L. and Kennedy, J. (2007) American idealpolitik and realpolitik in south-eastern Europe, 1919 and 1945. In: Order and Chaos? European Interventions in the Balkans. UNSPECIFIED.

Rijal, H.B. and Tuohy, P.G. and Nicol, J.F. and Humphreys, M.A. and Clarke, J.A. (2007) A window opening algorithm and UK office temperature field results and thermal simulation. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

Samuel, A.A.A. and Hand, J. (2007) CFD assessments within strongly transient domains. In: 10th IBPSA Conference on Building Simulation 2007, 2007-09-03 - 2007-09-06, Beijing.

St. John-Olcayto, E. and McInnes, C.R. and Ankersen, F. (2007) Safety-critical autonomous spacecraft proximity operations via potential function guidance. In: AIAA Infotech@Aerospace 2007 Conference and Exhibition, 2007-05-07 - 2007-05-10, California.

Stack, M.M. and Cann, P.M. (2007) A celebration of 25 years of the Tribology Group: From tribo-physics to tribo-chemistry - Guest Editorial. Journal of Physics D: Applied Physics, 40 (18). i-ii. ISSN 0022-3727

Strachan, P.A. and Kokogiannakis, G. and Macdonald, I. and Beausoleil-Morrison, I. (2007) Integrated comparative validation tests as an aid for building simulation tool users and developers. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions. ISSN 0001-2505

Tang, G.H. and Zhang, Yonghao and Gu, X.J. and Reese, J.M. and Barber, R.W. and Emerson, D.R. (2007) Lattice Boltzmann simulation of rarefied gas flows. In: 51st IUVSTA Workshop on Modern Problems and Capability of Vacuum Gas Dynamics, 2007-07-01, Värmdö, Sweden.

Thomason, J.L. (2007) Composites and the industry/university interface. In: Composite Materials for Aerospace, Defence and Security Applications, 2007-12-05, Glasgow.

Thomason, J.L. (2007) Interfaces and interfacial effects in glass reinforced thermoplastics - Keynote Presentation. In: Proceedings of the 28th Risø International Conference on Materials Science. Elsevier Science Ltd.

Tuohy, P.G. and Rijal, H.B. and Humphreys, M.A. and Nicol, J.F. and Samuel, A.A.A. and Clarke, J.A. (2007) Comfort driven adaptive window opening behaviour and the influence of building design. In: Proceedings of Building Simulation 2007, 10th IBPSA Conference. IBPSA.

Waters, T. and McInnes, C.R. (2007) Periodic orbits above the ecliptic plane in the solar sail restricted 3-body problem. Journal of Guidance, Control and Dynamics, 30 (3). pp. 687-693. ISSN 0731-5090

Waters, T. and McInnes, C.R. (2007) Periodic orbits high above the ecliptic plane in the solar sail 3-body problem. In: AAS/AIAA Space Flight Mechanics Conference, 2007-01-28 - 2007-02-01, Sedona, Arizona.

Zhang, Y.H. and Gu, X.J. and Barber, R.W. and Emerson, D.R. (2007) Modelling thermal flow in a transition regime using a lattice Boltzmann approach. EPL: A Letters Journal Exploring the Frontiers of Physics, 77 (3). 30003.1-30003.5. ISSN 0295-5075

Kelly, N.J. (2006) The role of energy efficiency in reducing Scottish and UK CO2 emissions. Energy Policy, 34 (18). pp. 3505-3515. ISSN 0301-4215

Camilleri, D. and Gray, T.G.F. and Mollicone, P. (2006) Computational methods and experimental validation of welding distortion simulation. In: Modelling of Manufacturing Processes Seminar, 2006-12-01, London, UK.

Camilleri, D. and Mollicone, P. and Gray, T.G.F. (2006) Alternative simulation techniques for distortion of thin plate due to fillet-welded stiffeners. Modelling and Simulation in Materials Science and Engineering, 14 (8). pp. 1307-1327. ISSN 0965-0393

Zheng, Yingsong and Reese, Jason and Struchtrup, Henning (2006) Comparing macroscopic continuum models for rarefied gas dynamics : a new test method. Journal of Computational Physics, 218 (2). pp. 748-769. ISSN 0021-9991

Mollicone, P. and Camilleri, D. and Gray, T.G.F. (2006) Numerical and experimental investigation on the effects of tack welds on thin plate structures. In: Simulation Versus Testing, NAFEMS Workshop, 2006-11-08, Cheshire, UK.

Vasile, Massimiliano and De Pascale, Paolo and Casotto, Stefano (2006) Optimal options for rendezvous and impact missions to NEOs. JBIS, Journal of the British Interplanetary Society, 59 (11). ISSN 0007-084X

Zhang, Wei and Ackemann, Thorsten and McGinily, Stephen and Schmid, Marc and Riis, Erling and Ferguson, Allister I. (2006) Operation of an optical in-well-pumped vertical-external-cavity surface-emitting laser. Applied Optics, 45 (29). pp. 7729-7735. ISSN 1539-4522

Ceriotti, M. and Colombo, C. and Vasile, M. (2006) Trajectory design and optimisation for lunar transfer. In: 1st Hellenic-European Student Space Science and Technology Symposium, 2006-10-09 - 2006-10-11, Patras, Greece.

Badawy, Ahmed and McInnes, Colin (2006) Autonomous structure assembly using potential field functions. In: 57th International Astronautical Congress, 2006-10-02 - 2006-10-06, Valencia, Spain.

Ceriotti, M. and Vasile, M. and Giardini, G. and Massari, M. (2006) Non deteriministic planning with evidence and paradoxical reasoning theories. In: 57th International Astronautical Congress, 2006-10-02 - 2006-10-06, Valencia, Spain.

Colombo, C. and Sanchez, J.P. and Vasile, M. and Radice, G. (2006) A comparative assessment of different deviation strategies for dangerous NEO. In: 57th International Astronautical Congress, 2006-10-02 - 2006-10-06, Valencia, Spain.

Gray, T.G.F. and Camilleri, D. and Mollicone, P. (2006) Experimental validation of computational methods for welding distortion prediction. In: 22nd Symposium on Experimental Mechanics of Solids, 2006-10-18 - 2006-10-21, Jachranka, Poland.

Loutzenhiser, P.G. and Manz, H. and Strachan, P.A. and Felsmann, C. and Frank, T. and Maxwell, G.M. and Oelhafen, P. (2006) An empirical validation of modelling solar gains through a glazing unit using building energy simulation programs. HVAC and R Research, 12 (4). pp. 1097-1116. ISSN 1078-9669

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2006) XRD and XPS studies of surface MMC layers developed by laser alloying Ti6Al4V using a combination of a dilute nitrogen environment and SiC powder. Surface and Coatings Technology, 201 (3-4). pp. 724-736. ISSN 0257-8972

Thomason, J.L. (2006) Making the University-Industry interface work. In: Ceramics and Composites Laboratory Industrial Forum Meeting, 2006-09-07, University of Sheffield. (Unpublished)

Reese, Jason and Zheng, Yingsong and Lockerby, Duncan A. (2006) Computing the near-wall region in gas micro- and nanofluidics : critical Knudsen layer phenomena. In: European Conference on Computational Fluid Dynamics, 2006-09-05 - 2006-09-08, Egmond aan Zee.

Cockroft, J. and Kelly, N.J. (2006) A comparative assessment of future heat and power sources for the UK domestic sector. Energy Conversion and Management, 47 (15-16). pp. 2349-2360. ISSN 0196-8904

Robertson, A.C. and Taylor, I.J. (2006) Numerical analysis of forced oscillations of a circular cylinder using a discrete vortex method. In: Proceedings of the 7th UK Conference on Wind Engineering. University of Strathclyde, Department of Mechanical Engineering, Glasgow, pp. 135-138. ISBN 978-0-9553571-0-7

Antonov, M. and Stack, M.M. and Hussainova, I. (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1406-0175

Bezyrtzi, Georgia and Strachan, Paul and Simpson, Ross and Shanks, Robert (2006) Estimation of the carbon footprint of student halls of residence in the University of Strathclyde. WSEAS Transactions on Environment and Development, 2 (9). pp. 1152-1156. ISSN 1790-5079

Rhodes, J. and Kotelko, M. (2006) Behaviour of cold-formed stainless steel stub columns under bending and axial loading. In: 11th Symposium on Stability of Structures, 2006-09-11 - 2006-09-15, Zakopane, Poland.

Badawy, Ahmed and McInnes, Colin (2006) Separation distance for robot motion control using superquadratic obstacle potentials. In: International Control Conference 2006, 2006-08-30 - 2006-09-01, Glasgow, UK.

Ceriotti, M. and Vasile, M. and Giardini, G. and Massari, M. (2006) A non-deterministic planner for planetary rover autonomy. In: AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 2006-08-21 - 2006-08-24, Keystone, Colorado.

Lappas, V. and Wie, B. and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K. (2006) Solar kites for Earth magneto-tail monitoring. In: ESA Workshop on Innovative Systems Concepts, 2006-02-21, Noordwijk, Netherlands.

Liu, X.M. and Thomason, J.L. and Jones, F.R. (2006) Differentiation of silane adsorption onto model E-glass surfaces from mixed solutions of amino and glycidyl silanes. In: 12th European Conference on Composite Materials, 2006-08-29 - 2006-09-01, Biarritz, France.

Madhlopa, A. (2006) Solar radiation climate in Malawi. Solar Energy, 80 (8). pp. 1055-1057. ISSN 0038-092X

Madhlopa, A. and Mgawi, R. and Taulo, J. (2006) Experimental study of temperature stratification in an integrated collector-storage solar water heater with two horizontal tanks. Solar Energy, 80 (8). pp. 989-1002. ISSN 0038-092X

Thomason, J.L. (2006) Structure-property relationships in glass reinforced polyamide: The effects of average fibre diameter and diameter distribution. In: 12th European Conference on Composite Materials, ECCM 12, 2006-08-29 - 2006-09-01, Biarritz, France. (Unpublished)

Thomason, J.L. (2006) Structure-property relationships in glass-reinforced polyamide, part 1: The effects of fiber content. Polymer Composites, 27 (5). pp. 552-562. ISSN 0272-8397

Méolens, J.G. and Dadzie, S.K. (2006) Wall temperature jump in polyatomic gas flows. In: 25th International Symposium on Rarefied Gas Dynamics, 2006-07-21 - 2006-07-28, St Petersburg, Russia.

Bourgeois, D. and Reinhart, C. and Macdonald, I. (2006) Adding advanced behavioural models in whole building energy simulation: A study on the total energy impact of manual and automated lighting control. Energy and Buildings, 38 (7). pp. 814-823. ISSN 0378-7788

Camilleri, D. and Hamilton, R. and MacKenzie, D. (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247

Li, H. and MacKenzie, D. (2006) Plastic collapse analysis of pipe bends under out-of-plane moment and internal pressure loading DBA. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping, 2006-07-23 - 2006-07-27, Vancouver, Canada.

Myong, R.S. and Lockerby, D.A. and Reese, J.M. (2006) The effect of gaseous slip on microscale heat transfer: an extended Graetz problem. International Journal of Heat and Mass Transfer, 49 (15-16). pp. 2502-2513. ISSN 0017-9310

Ponter, A.R.S. and Chen, Haofeng and Ciavarella, M. and Specchia, G. (2006) Shakedown analysis for rolling and sliding contact problems. International Journal of Solids and Structures, 43 (14-15). pp. 4201-4219. ISSN 0020-7683

Samuel, A.A.A. and Strachan, P.A. (2006) An integrated approach to indoor contaminant modelling. HVAC and R Research, 12 (3a). pp. 599-619. ISSN 1078-9669

Vasile, Massimiliano and De Pascale, Paolo (2006) Preliminary design of multiple gravity-assist trajectories. Journal of Spacecraft and Rockets, 43 (4). pp. 794-805. ISSN 0022-4650

Madhlopa, A. (2006) Study of diurnal production of distilled water by using solar irradiation distribution about solar noon. In: Eurosun Conference, 2006-06-26 - 2006-06-29, Glasgow.

Macpherson, G.B. and Reese, J.M. (2006) Molecular dynamics for near surface flows in nano liquid and micro gas systems. In: Proceedings of Fourth International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96170. ISBN 0791837785

Stack, M.M. and Abd El-Badia, T.M. (2006) Mapping the effects of slurry concentration, velocity and electrochemical potential on the erosion-corrosion of WC/Co-Cr thermally sprayed coatings. In: Proceedings of the 12th Nordic Symposium on Tribology. DTU, Department of Mechanical Engineering, Lulea University of Technology, Norway. ISBN 87-90416-19-8

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Simple thermo-elastic-plastic models for welding distortion simulations. Journal of Materials Processing Technology, 176 (1-3). pp. 77-86. ISSN 0924-0136

Deans, J. and Neale, J.D. and Dempster, W.M. and Lee, C.K. (2006) The use of effectiveness concepts in the calculations of thermal resistance of parallel plate heat sinks. Heat Transfer Engineering, 27 (5). pp. 56-67. ISSN 0145-7632

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Using finite element analysis to model the behaviour of an endovascular device - Poster Presentation. In: Proceedings of the UK Society for Biomaterials Conference, 2006-06-21 - 2006-06-22, Manchester, UK.

Ferguson, A. and Kelly, N.J. (2006) Modelling building-integrated stirling CHP systems. In: eSim2006: Canadian Building Simulation Conference, 2006-05-03 - 2006-05-05, Toronto, Canada.

Hexi, B. and McInnes, Colin (2006) Solar sail equilibria in the elliptical restricted three-body problem. Journal of Guidance, Control and Dynamics, 29 (3). pp. 538-543. ISSN 0731-5090

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Development of a finite element model to analyse the proximal ring of an endovascular device. In: 2006 International ANSYS Conference, 2006-05-02 - 2006-05-04, Pittsburgh, USA.

Turney, C.S.M. and Kershaw, A.P. and Lowe, J.J. and van der Kaars, S. and Johnston, James Rm and Rule, S. and Moss, P. and Radke, L. and Tibby, J. and McGlone, M.S. and Wilmshurst, J.M. and Vandergoes, M.J. and Fitzsimons, S.J. and Bryant, C. and James, S. and Branch, N.P. and Cowley, Joan and Kalin, Robert and Ogle, N. and Jacobsen, G. and Fifield, L.K. (2006) Climatic variability in the southwest Pacific during the Last Termination (20-10 kyr BP). Quaternary Science Reviews, 25 (9-10). pp. 886-903.

Camilleri, D. and Mollicone, P. and Comlekci, T. and Gray, T.G.F. (2006) Computational methods for the prediction of out-of-plane deformation in thin plate welded structures. In: Computational Mechanics in the UK: Proceedings of a Joint Conference of The Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation. Queen's University Belfast, pp. 7-10.

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.

Chen, H.F. and Ponter, A.R.S. (2006) Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading. International Journal for Numerical Methods in Engineering, 68 (1). pp. 13-32. ISSN 0029-5981

Pang, Y. and Spathopoulos, M.P. and Xia, H. (2006) Suboptimal target control for hybrid automata using model predictive control. Nonlinear Analysis: Theory, Methods and Applications, 65 (6). pp. 1211-1230. ISSN 0362-546X

Li, Hongjun and MacKenzie, Donald (2006) Characterising plastic collapse of pipe bend structures. International Journal of Pressure Vessels and Piping, 83 (2). pp. 85-95. ISSN 0308-0161

Baker, P.H. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. (2006) The development of instrumentation for the measurement of relative humidity within building microenvironments. Measurement, 39 (6). pp. 565-574. ISSN 0263-2241

Rhodes, J. (2006) Rolf Baehre 28/02/1928 - 09/06/2005 - a personal report. Thin-Walled Structures, 44 (1). p. 1. ISSN 0263-8231

Abid, M. and Nash, D.H. (2006) Relaxation behaviour of a gasketed and non-gasketed bolted flanged pipe joint - A comparative study. WSEAS Transactions on Applied and Theoretical Mechanics, 1 (2). pp. 239-246. ISSN 1991-8747

Abid, M. and Nash, D.H. (2006) Structural strength: gasketed Vs non-gasketed flange joint under bolt up and operating condition. International Journal of Solids and Structures, 43 (14-15). pp. 4616-4629. ISSN 0020-7683

Aziz, A. and Rhodes, J. and Macdonald, M. and Nash, D.H. (2006) A detailed examination of interactive buckling in plain channel sections. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.

Baker, Paul H. and Galbraith, Graham H. and McLean, R. Craig and Hunter, Colin and Sanders, C.H. (2006) The measurement and prediction of conditions within indoor microenvironments. Indoor and Built Environment, 15 (4). pp. 357-364. ISSN 1420-326X

Barltrop, N. and Grant, A.D. and Varyani, K.S. and Pham, X.P. (2006) Wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (4). pp. 195-203. ISSN 1475-0902

Biggs, J.D. and Holderbaum, W. (2006) Integrating control systems defined on the frame bundles of the space forms. In: 45th IEEE Conference on Decision and Control, 2006-12-13 - 2006-12-15, San Diego.

Biggs, James D. and Holderbaum, William (2006) The geometry of optimal control problems on some six dimensional lie groups. In: 44th IEEE Conference on Decision and Control/European Control Conference, 2005-12-12, Seville, Spain.

Bookless, J. and McInnes, C.R. (2006) Dynamics and control of displaced periodic orbits using solar sail propulsion. Journal of Guidance, Control and Dynamics, 29 (3). pp. 527-537. ISSN 0731-5090

Bradley, G.R. and MacKenzie, P.M. (2006) Development of a novel metastable composite material. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). pp. 181-187. ISSN 1464-4207

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Thermal distortion of stiffened plate due to fillet welds - computational and experimental investigation. Journal of Thermal Stresses, 29 (2). pp. 111-137. ISSN 0149-5739

Camilleri, D. and Gray, T.G.F. (2006) Optimization of welded lightweight multiple-stiffener plate structures to minimise unwanted shape distortion. Welding and Cutting, 7 (6). pp. 320-327. ISSN 1612-3433

Carus, D. and Grant, C. and Wattie, R. and Pridham, M.S. (2006) Development and validation of a technique to measure and compare the opening characteristics of tamper-evident bottle closures. Packaging Technology and Science, 19 (2). pp. 105-118. ISSN 0894-3214

Chen, H.F. and Ponter, A.R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 123-135. ISSN 0308-0161

Chen, H.F. and Ponter, A.R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 136-147. ISSN 0308-0161

Chen, J.F. and Pan, W. (2006) Three dimensional stress distribution in FRP-to-concrete bond test specimens. Construction and Building Materials, 20 (1-2). pp. 46-58. ISSN 0950-0618

Clarke, J.A. (2006) Trends in building energy modelling and simulation. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671

Clarke, J.A. and Grant, A.D. and Connor, G. and Johnstone, C. (2006) Regulating the output characteristics of tidal current power stations to facilitate better base load matching over the lunar cycle. Renewable Energy, 31 (2). pp. 173-180. ISSN 0960-1481

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C.M. (2006) Design and initial testing of a contra-rotating tidal current turbine. In: Proceedings of the World Renewable Energy Congress IX. Pergamon Press. ISBN 00844671

Clarke, J.A. and Macdonald, I. and Nicol, J.F. (2006) Predicting adaptive responses - simulating occupied environments. In: Proceedings of international comfort and energy use in buildings conference. Network for Comfort and Energy Use in Buildings (NCEUB), London.

Dachwald, B. and Mengali, G. and Quarta, A.A. and Macdonald, M. (2006) Parametric model and optimal control of solar sails with optical degradation. Journal of Guidance, Control and Dynamics, 29 (5). pp. 1170-1178. ISSN 0731-5090

Dempster, W.M. and Lee, C.K. and Deans, J. (2006) The prediction of the flow through safety relief valves. In: Proceedings of the ASME International Conference on Pressure Vessels and Piping 2006. ASME. ISBN 0791847551

Essah, E.A. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C. (2006) Airflow between houses and their roofs. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP). ISBN 0-415-41675-2

Galbraith, G.H. and Baker, P.H. and Bailly, D. and McLean, R.C. (2006) An X-ray apparatus for advanced construction related moisture research. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. Engineering and Physical Sciences Research Council.

Galloway, A. and McPherson, N.A. (2006) Nitrogen retention/enrichment of 316LN austenitic steel welds. In: FabTech International Conference. Society of Manufacturing Engineers, pp. 281-283.

Galloway, A. and McPherson, N.A. (2006) The effect of shielding gas composition on weld metal nitrogen retention in 316LN austenitic stainless steels. Welding and Cutting, 5 (4). pp. 225-230. ISSN 1612-3433

Galloway, Alexander and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic stainless steel welds. In: FabTech International Conference, 2011-06-20. (Unpublished)

Gorman, D. and Trendafilova, I. and Mulholland, A. and Horáček, J. (2006) Vibration of a coupled plate/fluid interacting system and its implication for modal analysis and vibration health monitoring. Applied Mechanics and Materials, 5-6. pp. 323-330. ISSN 1660-9336

Gray, T.G.F. (2006) Integration of case study technical investigations in honours/masters engineering courses. International Journal of Mechanical Engineering Education, 34 (4). pp. 315-329. ISSN 0306-4190

Gu, X.J. and Emerson, D.R. and Barber, R.W. and Zhang, Y. (2006) Towards numerical modelling of surface tension of microdroplets. In: Parallel Computational Fluid Dynamics - Theory and Applications. Elsevier, pp. 365-373. ISBN 0-444-52206-9

Heiyantuduwa, M.A. and Macdonald, Martin and Rhodes, James (2006) Investigation of web crippling behaviour using nonlinear finite element analysis. In: Proceedings of International Colloquium on Stability and Ductility of Steel Structures, SDSS'06, Lisbon, Portugal. Structural Stability Research Council (SSRC).

Hexi, B. and McInnes, C.R. (2006) Solar sail halo orbits at the Sun-Earth artificial L1 point. Celestial Mechanics and Dynamical Astronomy, 94 (2). pp. 155-171. ISSN 0923-2958

Hexi, B. and McInnes, C.R. (2006) Trajectories to and from the Lagrange points and the primary body surfaces. Journal of Guidance, Control and Dynamics, 29 (4). pp. 998-1003. ISSN 0731-5090

Hughes, G.W. and Macdonald, M. and McInnes, C.R. (2006) Terrestrial planet sample return missions using solar sail propulsion. ESA European Space Agency Bulletin, 59 (8-11). pp. 797-806. ISSN 0376-4265

Hughes, G.W. and Macdonald, M. and McInnes, C.R. and Lyngvi, A. and Falkner, P. and Atzei, A. (2006) Sample return from Mercury and other terrestrial planets using solar sail propulsion. Journal of Spacecraft and Rockets, 43 (4). pp. 828-835. ISSN 0022-4650

Israr, A. and Cartmell, M. and Krawczuk, M. and Ostachowicz, W.M. and Manoach, E. and Trendafilova, I. and Shishkina, E.V. and Palacz, M. (2006) On approximate analytical solutions for vibrations in cracked plates. Applied Mechanics and Materials, 5-6. pp. 315-322. ISSN 1660-9336

Jiang, J. and Stack, M.M. (2006) Modelling sliding wear: from dry to wet environments. WEAR, 261 (9). pp. 954-965. ISSN 0043-1648

Jin, M.M. and Nash, D.H. and Banks, W.M. (2006) Impact loading on symmetrical and unsymmetrical hybrid composite laminates. In: Proceedings of the 14th Annual International Conference on Composites/NanoEngineering. ICCE. ISBN 0-9533991-0-9

Johnstone, C. and Nielsen, K. and Lewis, T. and Sarmento, A. and Lemonis, G. (2006) EC FPVI Co-ordinated action on ocean energy: a European platform for sharing technical information and research outcomes in wave and tidal energy systems. Renewable Energy, 31 (2). pp. 191-196. ISSN 0960-1481

Kavatzikidou, P. and Stamp, R. and Sutcliffe, S. and Doherty, J.G.P. and Black, R.A. (2006) Manufacture of 3D scaffolds by means of selective laser melting (SLM) of calcium phosphate-based glass powders. In: 5th UK Society for Biomaterials Conference and Postgraduate Day, 2006-06-28 - 2006-06-29, Manchester.

Kim, J.M. and Clarke, J.A. and Hong, J. and Strachan, P.A. and Hwang, I. and Lee, H. (2006) A strategic study of energy efficient and hybrid energy system options for a multi-family building in Korea. In: Eurosun Conference, 2006-06-26 - 2006-06-29, Glasgow.

Kumaraperumal, A. and Baker, P.H. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C. (2006) Comparison of measured and modelled driving rain data on a historic building with standard assessment methods. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP). ISBN 0-415-41675-2

Kummert, M. and Andre, P. and Argiriou, A.A. (2006) Comparing control strategies using experimental and simulation results: Methodology and application to heating control of passive solar buildings. HVAC and R Research, 12 (3a). pp. 715-737. ISSN 1078-9669

Kummert, M. and Bernier, M. (2006) Benny Farm - Simulation of the Hybrid Solar-GCHP-Boiler System. Other. IBPSA.

Kummert, M. and Bernier, M. (2006) Sub-hourly simulation of residential ground coupled heat pump systems. In: Proceedings of the 7th International Conference on System Simulation in Buildings. University of Liege, pp. 34-46.

Kummert, M. and Bernier, M. and Roy, M. (2006) Using simulation to validate and optimise the design of a hybrid solar-GCHP system. In: Proceedings of IBPSA-Canada's 4th Biennial Building Performance Simulation Conference (eSim 2006). IBPSA.

MacKenzie, D. and Li, H. (2006) A plastic load criterion for inelastic design by analysis. Journal of Pressure Vessel Technology, 128 (1). pp. 39-45. ISSN 0094-9930

MacKintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2006) Influence of fillers on the relaxation characteristics and processing of polyurethane elastomers. In: 9th International ESAFORM Conference on Materials Forming, 2006-04-26 - 2006-04-28, Glasgow.

Macdonald, M. and McInnes, C.R. and Alexander, D. and Sandman, A. (2006) GeoSail: Exploring the megnetosphere using a low cost solar sail. Acta Astronautica, 59 (8-11). pp. 757-767. ISSN 0094-5765

Macdonald, M. and Hughes, G.W. and McInnes, C.R. and Lyngvi, A. and Falkner, P. and Atzei, A. (2006) Solar polar orbiter: a solar sail technology reference study. Journal of Spacecraft and Rockets, 43 (5). pp. 960-972. ISSN 0022-4650

Macdonald, Martin and Heiyantuduwa, M.A. and Rhodes, James (2006) Finite element analysis of web crippling behaviour of cold-formed steel flexural members. In: Proceedings of the 18th International Speciality Conference on Cold Formed Steel Structures. University of Missouri-Rolla.

Manz, H. and Loutzenhiser, P.G. and Frank, T. and Strachan, P.A. and Bundi, R. and Maxwell, G.M. (2006) Series of experiments for empirical validation of solar gain modelling in building energy simulation codes - Experimental setup, test cell characterization, specifications and uncertainty analysis. Building and Environment, 41 (12). pp. 1784-1797. ISSN 0360-1323

McInnes, C.R. (2006) Planetary macro-engineering using orbiting solar reflectors. In: Macro-Engineering: A Challenge for the Future. Springer, pp. 215-250. ISBN 978-1-4020-3739-9

McInnes, C.R. and Cartmell, M. (2006) Dynamics of propellantless propulsion systems. In: Dynamics of Propellantless Propulsion Systems. Elsevier Astrodynamics Book Series . Elsevier, pp. 189-235. ISBN 0-12-373562-9

McInnes, C.R. and Hughes, G.W. and Macdonald, M. (2006) High energy small body missions using solar sail propulsion. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484

McInnes, C.R. and Hughes, G.W. and Macdonald, M. (2006) Small bodies missions and technologies (part 2). In: Proceedings of the 56th International Astronautical Congress. Curran Associates, IAC-05. ISBN 9781604236484

McInnes, C.R. and Davis, C. (2006) Novel payload dynamics on space elevator systems. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484

McInnes, C.R. and Davis, C. (2006) The orbital siphon : A new space elevator concept. JBIS, Journal of the British Interplanetary Society, 59 (10). pp. 368-374. ISSN 0007-084X

McLaren, A.J. (2006) Design and performance of ropes for climbing and sailing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 1-12. ISSN 1464-4207

Milne, K.A. and McLaren, A.J. (2006) An assessment of the strength of knots and splices used as eye terminations in a sailing environment. Sports Engineering, 9 (1). pp. 1-13. ISSN 1369-7072

Mizzi, S. and Emerson, D.R. and Barber, R.W. and Reese, J.M. (2006) Modelling low Knudsen number transition flows using a computationally efficient continuum-based methodology. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006). ASME. ISBN 0791847608

Mizzi, S. and Emerson, D.R. and Stefanov, S. and Barber, R.W. and Reese, J.M. (2006) Micro-scale cavities in the slip - and transition - flow regimes. In: Computational Micro and Nanofluidics Conference (ECCOMAS CFD), 2006-09-01, Egmond aan Zee, The Netherlands.

Mohr, S. and Zhang, Y. and Macaskill, A. and Day, P.J.R. and Barber, R.W. and Goddard, N.J. and Emerson, D.R. and Fielden, P.R. (2006) Optimal design and operation for a droplet-based PCR chip. In: Proceedings of ASME 4th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006). ASME.

O'Hare, L. and Scanlon, T.J. and Reese, J.M. (2006) Gas flow through microscale orifice plates. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96193. ISBN 0791837785

Pan, W. and Leen, S.B. and Hyde, T.H. (2006) Investigation of an iterative sub-structure method for elastic and elastic-plastic framework analysis. Computers and Structures, 84 (10-11). pp. 690-698. ISSN 0045-7949

Pang, Y. and Xia, H. and Spathopoulos, M.P. (2006) Robust semi-explicit model predictive control for hybrid automata. In: Proceedings of International Conference on Computational Science and Its Applications. Lecture Notes in Computer Science . Springer. ISBN 3540340793

Phillipson, M.C. and Sanders, C.H. and Galbraith, G.H. and McLean, R.C. (2006) Climate change, hygrothermal modelling and the indoor environment. In: Research in Building Physics and Building Engineering, Proceedings of the 3rd International Building Physics Conference, Montreal. International Association of Building Physics (IABP).

Picard, D. and Delisle, V. and Bernier, M. and Kummert, M. (2006) On the combined effect of wastewater heat recovery and solar domestic hot water heating. In: Proceedings of the 31st Conference of the Solar Energy Society of Canada and 1st Canadian Solar Buildings Research Network Conference. International Solar Energy Society.

Purandare, Y. and Stack, M.M. and Hovsepian, P. (2006) Velocity effects of erosion-corrosion of CrN/Nb superlattice PVD coatings. Surface and Coatings Technology, 201 (1-2). pp. 361-370. ISSN 0257-8972

Qin, R. and Zhang, Y.H. (2006) Lattice Boltzmann study of the effect of stirring on the migration rate of curved interfaces in binary slurries. Computers and Fluids, 35 (8-9). pp. 929-933. ISSN 0045-7930

Reese, J.M. (2006) Beyond Navier-Stokes: hydrodynamic models for rarefaction phenomena in micro scale gas flows. In: Microfluidique 2006, 3rd French Microfluidics Conference, 2006-12-01, Toulouse, France.

Reese, J.M. (2006) Hydrodynamic descriptions of curious non-equilibrium phenomena in hypersonic and microscale gas flows. In: 3rd International Conference for Mesoscopic Methods in Engineering and Science, 2006-07-25 - 2006-07-28, Virginia, USA.

Rhodes, J. (2006) Buckling and postbuckling behaviour of light gauge steel members. In: Analysis and Design of Plated Structures. Woodhead Publishing, p. 508. ISBN 1-85573-967-4

Rhodes, J. (2006) Some recent research on thin-walled members at the University of Strathclyde. In: 11th Symposium on the Stability of Structures, 2006-09-01, Zakopane, Poland.

Rhodes, J. and Burns, R. (2006) Development of a portal frame system on the basis of component testing. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.

Scanlon, T.J. and Reese, J.M. and O'Hare, L. (2006) A procedure for calculating wall distance in arbitrary geometrics. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96037. ISBN 0791837785

Spathopoulos, M.P. (2006) Hybrid target control design. In: Proceedings of the International Conference on Hybrid Systems and Applications. Elsevier.

Stack, M.M. and Abd El-Badia, T.M. (2006) Mapping erosion-corrosion of WC/Co-Cr based composite coatings: Particle velocity and applied potential effects. Surface and Coatings Technology, 201 (3-4). pp. 1335-1347. ISSN 0257-8972

Stack, M.M. and Abd El-Badia, T.M. (2006) On the construction of erosion-corrosion maps for a WC/Co-Cr based coating in aqueous conditions. WEAR, 261 (11-12). pp. 1181-1190. ISSN 0043-1648

Stack, M.M. and Antonov, M. and Hussainova, I. (2006) Some views on the erosion-corrosion response of bulk chromium carbide based cermets. Journal of Physics D: Applied Physics, 39 (15). pp. 3165-3174. ISSN 0022-3727

Stefanov, S. and Barber, R.W. and Emerson, D.R. and Reese, J.M. (2006) The critical accommodation coefficient for velocity inversion in rarefied cylindrical Couette flow in the slip and near free-molecular regimes. In: Proceedings of the 25th International Symposium on Rarefied Gas Dynamics (RGD25). AIP.

Thomason, J.L. (2006) Structure-property relationships in glass reinforced polyamide - Influence of fibre length, diameter and concentration. In: 9th AVK-TV Conference, 2006-09-19 - 2006-09-20, Essen, Germany.

Trendafilova, I. (2006) Vibration-based damage detection in structures using time series analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (3). pp. 261-272. ISSN 0954-4062

Trendafilova, I. and Manoach, E. and Cartmell, M. and Krawczuk, M. and Ostachowicz, W.M. and Palacz, M. (2006) On the problem for damage detection of vibrating cracked plates. Applied Mechanics and Materials, 5-6. pp. 247-254. ISSN 1660-9336

Tuohy, P.G. and Johnstone, C. and McElroy, L.B. (2006) Sustainable housing standards: use of simulation in design. In: Eurosun Conference, 2006-06-26 - 2006-06-29, Glasgow.

Tuohy, P.G. and Strachan, P.A. and Marnie, A. (2006) Carbon and energy performance of housing: a model and toolset for policy development applied to a local authority housing stock. In: Eurosun Conference, 2006-06-26 - 2006-06-29, Glasgow.

Ulleberg, O. and Ito, H. and Maack, M. and Ridell, B. and Miles, S. and Kelly, N.J. and Iacobazzi, A. (2006) Modelling and evaluation of hydrogen demonstration systems. In: 16th World Hydrogen and Energy Conference (WHEC), 2006-06-13 - 2006-06-16, Lyon, France.

Walker, C.A. (2006) The effect of cyclic loading on the stiffness and damping factors in the midsoles of running shoes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (1). pp. 41-47. ISSN 1464-4207

Walker, C.A. and Ujihashi, S. (2006) Guest editorial article, special issue on sports engineering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220 (4). i-ii. ISSN 1464-4207

Wood, J. (2006) CCOPPS: Certification of competencies in the power and pressure systems industry. In: Simulation of Power Generation Technology Seminar, 2006-09-27, Ratcliffe.

Zhang, Y. and Reese, J.M. and Scanlon, T.J. and Lockerby, D.A. (2006) Scaled Navier-Stokes-Fourier equations for rarefied gas flow and heat transfer phenomena in micro- and nano-systems. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96066. ISBN 0791837785

Zhang, Yong-Hao and Gu, Xiao-Jun and Barber, Robert W. and Emerson, David R. (2006) Capturing Knudsen layer phenomena using lattice Boltzmann model. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 74 (046704). ISSN 1063-651X

Dadzie, S.K. and Méolens, J.G. (2005) Temperature jump and slip velocity calculations from an anisotropic scattering kernel. Physica A: Statistical Mechanics and its Applications, 358 (2-4). pp. 328-346. ISSN 0378-4371

Pang, Y. and Spathopoulos, M.P. (2005) Synthesis of controllers for target problems of hybrid systems using appropriate computation. International Journal of Control, 78 (18). pp. 1466-1485. ISSN 0020-7179

Camilleri, D. and Gray, T.G.F. (2005) Computationally efficient welding distortion simulation techniques. Modelling and Simulation in Materials Science and Engineering, 13 (8). pp. 1365-1382. ISSN 0965-0393

Chen, H.F. and Ponter, A.R.S. (2005) On the behaviour of a particulate metal matrix composite subjected to cyclic temperature and constant stress. Computational Materials Science, 34 (4). pp. 425-441. ISSN 0927-0256

Saliba, M.A. and Camilleri, D. and Farrugia, M.J. (2005) Development of an anthropomorphic robot hand and wrist for teleoperation applications. In: Proceedings of the IEEE International Conference on Information and Automation, 2005-12-15 - 2005-12-18, Colombo, Sri Lanka.

Carus, D. (2005) Getting a grip. Packaging Professional, 28 (6). pp. 4-6. ISSN 1477-8467

Li, Y. and Baker, T.N. and Mitchell, P.S. (2005) Vanadium microalloyed steel for thin slab casting and direct rolling. Materials Science Forum, 500-501. pp. 237-244. ISSN 0255-5476

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2005) Development of a preliminary finite element model to analyse the proximal ring of an endovascular device. In: UK ANSYS User Conference 2005, 2005-11-15 - 2005-11-16, Warwickshire, UK.

Vijayakumar, G. and Kummert, M. and Klein, S.A. and Beckman, W.A. (2005) Analysis of short-term solar radiation data. Solar Energy, 79 (5). pp. 495-504. ISSN 0038-092X

Ceriotti, M. and Colombo, C. and Scarì, E. and Vasile, M. (2005) Halo orbit determination in the mission analysis of the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21, Fukuoka, Japan.

Colombo, C. and Ceriotti, M. and Scarì, E. and Vasile, M. (2005) Trajectory optimization for the Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21, Fukuoka, Japan.

Scarì, E. and Ceriotti, M. and Colombo, C. and Vasile, M. (2005) Mission analysis of Hevelius-lunar microsatellite mission. In: 56th International Astronautical Congress, 2005-10-17 - 2005-10-21, Fukuoka, Japan.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computationally efficient welding simulation for out-of-plane distortion in double-sided fillet welding. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08, Lecce, Italy.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08, Lecce, Italy.

Li, H. and MacKenzie, D. (2005) Characterising gross plastic deformation in design by analysis. International Journal of Pressure Vessels and Piping, 82 (10). pp. 777-786. ISSN 0308-0161

Mollicone, P. and Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Thermo-elastic-plastic finite element models for gas-shielded metal-arc welding fabrication. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08, Lecce, Italy.

Nash, D.H. and Dempster, I. (2005) Modelling the sources of cracking of aircraft compressor vanes rings. Engineering Failure Analysis, 12 (5). pp. 699-710. ISSN 1350-6307

Zhang, Y.H. and Qin, R.S. and Sun, Y.H. and Barber, R.W. and Emerson, D.R. (2005) Gas flow in microchannels - a Lattice Boltzmann method approach. Journal of Statistical Physics, 121 (1-2). pp. 257-267. ISSN 0022-4715

Stack, M.M. and Jawan, H. and Mathew, M.T. (2005) On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments. Tribology International, 38 (9). pp. 848-856. ISSN 0301-679X

Reese, Jason (2005) Nonlinear gas dynamics and the consequences of local thermodynamic disequilibrium. In: Recent advances in Nonlinear Mechanics, RANM2005, 2005-08-30 - 2005-09-01, Aberdeen.

Myong, R.S. and Reese, J.M. and Barber, R.W. and Emerson, D.R. (2005) Velocity slip in microscale cylindrical Couette flow: the Langmuir model. Physics of Fluids, 17 (8). 087105. ISSN 1070-6631

Bourgeois, D. and Reinhart, C. and Macdonald, I. (2005) Assessing the total energy impact of occupant behavioural response to manual and automated lighting systems. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18, Montreal, Canada.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) Detecting the perforation threshold of curved symmetrical CFRP composite panels. In: The 12th International Conference on Composites and Nano Engineering (ICCE-12), 2005-08-01 - 2005-08-06, Tenerife, Spain.

Macdonald, I. and McElroy, L.B. and Hand, J. and Clarke, J.A. (2005) Transferring simulation from specialists into design practice. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18, Montreal, Canada.

Strachan, P.A. and Kokogiannakis, G. and Macdonald, I. (2005) Encapsulation of validation tests in the ESP-r simulation program. In: 9th International Building Performance Simulation Association Conference, 2005-08-15 - 2005-08-18, Montreal, Canada.

Pang, Y. and Spathopoulos, M.P. (2005) Time optimal control systhesis for discrete time hybrid automata. International Journal of Control, 78 (11). pp. 847-863. ISSN 0020-7179

Greenshields, Christopher and Reese, Jason (2005) Some consequences of non-local-equilibrium in hypersonic aerodynamic flows. In: 1st European Conference for Aerospace Sciences, 2005-07-04 - 2005-07-07, Moscow,.

MacKenzie, D. and Li, H. (2005) A plastic load criterion for inelastic DBA. In: ASME Pressure Vessels and Piping Conference, 2005-07-17 - 2005-07-21, Denver, USA.

Taylor, I.J. and Vezza, M. and Salisbury, I. (2005) A study into the performance of wind shields on both streamlined and bluff bridge deck sections. In: Fourth European and African Conference on Wind Engineering, 2005-07-11 - 2005-07-15, Prague, Czech Republic.

Thomason, J.L. (2005) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 6. The properties of injection moulded long fibre PP at high fibre content. Composites Part A: Applied Science and Manufacturing, 36 (7). pp. 995-1003. ISSN 1359-835X

Carles, P. and Dadzie, K. (2005) Two typical time scales of the piston effect. Physical Review E, 71 (6). 066310. ISSN 1539-3755

Dadzie, K. and Meolans, J.G. (2005) Slip length and problem of anomalous velocity profiles. In: 4th AIAA Theoretical Fluid Mechanics Meeting, 2005-06-06 - 2005-06-09, Toronto. (Unpublished)

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: The 15th International Conference on Composite Materials, ICCM 15, 2005-06-27 - 2005-07-01, Durban, South Africa.

David-West, O.S. and Nash, D.H. and Banks, W.M. and , ISOPE (2005) The effect of surface ply stiffness on the energy absorption of curved carbon fibre composites. In: 15th International Offshore and Polar Engineering Conference, 2005-06-19 - 2005-06-24, Seoul, Korea.

Lockerby, Duncan A. and Reese, Jason M. and Gallis, Michael A. (2005) Capturing the Knudsen layer in continuum-fluid models of non-equilibrium gas flows. AIAA Journal, 43 (6). pp. 1391-1393. ISSN 0001-1452

Robertson, A.C. and Li, H. and MacKenzie, D. (2005) Plastic collapse of pipe bends under combined internal pressure and in-plane bending. International Journal of Pressure Vessels and Piping, 82 (5). pp. 407-416. ISSN 0308-0161

Zhang, Yonghao and Qin, Rongshan and Emerson, David R. (2005) Lattice Boltzmann simulation of rarefied gas flows in microchannels. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 71 (047702). ISSN 1063-651X

Thomason, J.L. (2005) Structure-property relationships of thermoplastic composites - The role of fibre reinforcement. In: Thermoplastic Composite Molding, 2005-04-28 - 2005-04-29, Ohio, USA. (Unpublished)

Vasile, Massimiliano and Summerer, Leopold and De Pascale, Paolo (2005) Design of Earth-Mars transfer trajectories using evolutionary-branching technique. Acta Astronautica, 56 (8). pp. 705-720. ISSN 0094-5765

Méolens, J. Gilbert and Dadzie, S.K. (2005) Scattering kernel for polyatomic molecules. Journal of Mathematical Physics, 46 (6). 062101. ISSN 0022-2488

Abid, M. and Nash, D.H. (2005) FMEA of gasketed and non-gasketed bolted flanged pipe joints. Engineering Integrity, 17 (1). pp. 14-21. ISSN 1365-4101

McLean, R.F. and Alsop, S. and Fleming, J.S. (2005) Nyquist - overcoming the limitations. Journal of Sound and Vibration, 280 (1-2). pp. 1-20. ISSN 0022-460X

Gray, T.G.F. (2005) Lorry loads of problems. Professional Engineering, 18 (2). p. 21. ISSN 0953-6639

Afendi, M. and Banks, W.M. and Kirkwood, D. (2005) Bubble free resin for infusion process. Composites Part A: Applied Science and Manufacturing, 36 (6). pp. 739-746. ISSN 1359-835X

Gorman, D. and Lee, C.K. and Reese, J.M. and Horáček, J. (2005) Vibration analysis of a thin circular plate influenced by liquid/gas interaction in a cylindrical cavity. Journal of Sound and Vibration, 279 (3-5). pp. 601-618. ISSN 0022-460X

Antonov, M. and Stack, M.M. and Hussainova, I. (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07, Kaunas, Lithuania.

Biggs, J.D. and Holderbaum, W. (2005) The geometry of optimal control solutions on some six dimensional lie groups. In: 44th IEEE Conference on Decision and Control and European Control Conference, 2005-12-12 - 2005-12-15, Seville.

Blackburn, S.J. and Nicol, A.C. and Walker, C.A. (2005) Development of a biomechanically validated turf testing rig. In: XXth Congress of the International Society of Biomechanics, Cleveland, Ohio, 2005-07-31 - 2005-08-05, Cleveland, Ohio.

Bloem, J.J. and Colli, A. and Strachan, P.A. (2005) Evaluation of PV technology implementation in the building sector. In: International Conference on Passive and Low Energy Cooling for the Built Environment, 2005-05-01, Santorini, Greece.

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2005) Changes in the dielectric relaxations of water in epoxy resin as a function of the extent of water ingress in carbon fibre composites. Polymer, 46 (7). pp. 2218-2229. ISSN 0032-3861

Bookless, J. and McInnes, C.R. (2005) Control of Lagrange point orbits using solar sail propulsion. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computational prediction of out-of-plane welding distortion and experimental investigation - Awarded Central Electricity Generating Board Prize. Journal of Strain Analysis for Engineering Design, 40 (2). pp. 161-176. ISSN 0309-3247

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Design support tool for prediction of welding distortion in multiply-stiffened plate structures experimental and computational investigation. Journal of Ship Production, 21 (4). pp. 219-234. ISSN 8756-1417

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Finite element analysis of out-of-plane distortion in plates due to double-sided fillet-welded attachments. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005, Malta. NAFEMS, p. 88. ISBN 1-874376-03-4

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. shakedown, reverse plasticity and ratchetting. International Journal of Pressure Vessels and Piping, 82 (2). pp. 85-94. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: creep relaxation and reverse plasticity. International Journal of Pressure Vessels and Piping, 82 (2). pp. 95-104. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) The linear matching method for shakedown and limit analyses applied to rolling and sliding point contact problems. Road Materials and Pavement Design, 6. pp. 9-30.

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. (2005) Design of a contra-rotating marine current turbine. In: Proceedings of the 6th European Wave and Tidal Energy Conference. EWTEC. ISBN 094764942-5

Clarke, J.A. and Connor, G. and Grant, A.D. and Johnstone, C. (2005) The impact of limiting tidal turbine capacity on the output characteristics from three complimentary tidal sites in Scotland over the lunar cycle. In: Proceedings of the 9th World Renewable Energy Congress (WREC). Elsevier.

Clarke, J.A. and Grant, A.D. and Johnstone, C. (2005) Output characteristics of tidal current power stations during spring and neap cycles. In: Proceedings of the 8th World Renewable Energy Congress. cpl press. ISBN 0080444709

Clarke, J.A. and Johnstone, C. and McElroy, L.B. (2005) Application of a building energy performance system to assess domestic sector upgrading strategies for Scotland. In: Proceedings of the World Renewable Energy Congress : Innovation in Europe Regional Meeting. Elsevier, Oxford, United Kingdom. ISBN 0080446701

Clarke, J.A. and Johnstone, C.M. and Lever, M. and McElroy, L.B. and Prazeres, L.M.R. and Strachan, P.A. (2005) Thermal improvement of existing dwellings. Working paper. ESRU Publications, Glasgow.

Dachwald, B. and Sebolt, W. and Macdonald, M. and McInnes, C.R. and Rios-Reyes, L. and Scheeres, D.J. and Gorlich, M. and Lura, F. and Diedrich, B. and Baturkin, V. and Coverstone, V.L. and Leipold, M. and Garbe, G. (2005) Potential solar sail degradation effects on trajectory and altitude controls. In: Proceedings of the AIAA Guidance, Navigation and Control Conference. American Institute of Aeronautics and Astronautics.

Dachwald, B. and Baturkin, V. and Coverstone, V.L. and Diedrich, B. and Garbe, G. and Gorlich, M. and Leipold, M. and Lura, F. and Macdonald, M. and McInnes, C.R. and Mengali, G. and Quarta, A.A. and Rios-Reyes, L. and Scheeres, D.J. and Sebolt, W. and Wie, B. (2005) Potential effects of optical solar sail degredation on trajectory design. In: Proceedings of the AAS/AIAA Astrodynamics Specialist Conference. American Institute of Aeronautics and Astronautics, pp. 2569-2592.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) Damage threshold and the impact characteristics of +/- 45° and +/- 60° CFRP laminates - Poster Presentation. In: Proceedings of the 4th International Conference on Advances in Experimental Mechanics. Trans Tech Publications. ISBN 0-87849-987-3

Doyle, M.J. and Carus, D. and Pridham, M.S. (2005) A system to retrieve consumer-facing product information. British Food Journal, 107 (10). pp. 781-791. ISSN 0007-070X

Endo, M. and Yokota, Y. and Uchiyama, K. and Shimada, Y. and Radice, G. and McInnes, C.R. (2005) Target proximity and obstacle avoidance for the altitude control of spacecraft using potential function guidance method. In: Proceedings of the Annual Meeting of the Northern Section of the Japan Society for Aeronautical and Space Sciences. Japan Society for Aeronautical and Space Sciences, pp. 23-26.

Gorman, Daniel G. and Lee, Chee K. and Craighead, Ian A. and Horáček, Jaromır (2005) Transverse vibration analysis of a prestressed thin circular plate in contact with an acoustic cavity. Engineering Mechanics, 12 (6). pp. 417-427. ISSN 1802-1484

Hexi, B. and McInnes, C.R. (2005) Solar sail orbits at artificial Sun-Earth libration points. Journal of Guidance, Control and Dynamics, 28 (6). pp. 1328-1331. ISSN 0731-5090

Hiroaki, U. and McInnes, C.R. (2005) Quasi-linear optimization for multiple-spacecraft clustering. In: Proceedings of the 56th International Astronautical Congress. Curran Associates. ISBN 9781604236484

Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. WEAR, 259 (1-6). pp. 243-255. ISSN 0043-1648

Jones, F.R. and Thomason, J.L. and Liu, X.M. (2005) The differential adsorption of silanes from model e-glass surfaces using high resolution XPS. In: 5th International Symposium on Silanes and Other Coupling Agents, 2005-06-22 - 2005-06-24, Toronto.

Kim, J.M. and Clarke, J.A. and Hong, J. and Strachan, P.A. and Hwang, I. and Lee, H.W.V. (2005) Simulation-based design procedure to evaluate hybrid-renewable energy systems for residential buildings in Korea. In: Proceedings of the 9th International Building Performance Simulation Association Conference. IBPSA, Montreal, Canada, pp. 191-198.

Kotelko, M. and Kolakowski, Z. and Rhodes, J. (2005) Comparative investigation into buckling loads and load-bearing capacity of thin-walled columns under compression. In: International Conference on Lightweight Structures in Civil Engineering, 2005-09-12 - 2005-09-14, Warsaw, Poland.

Kummert, M. (2005) Le Protocol de Kyoto: Situation en Europe et en Amerique du Nord (The Situation in Europe and North America with regard to the Kyoto Protocol) - Invited Lecture. In: 7ème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, 2005-05-01, St Malo, France.

Kummert, M. and Andre, P. (2005) Simulation of a model-based optimal controller for heating systems under realistic hypothesis. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA, pp. 555-562.

Kummert, M. and Andre, P. and Argiriou, A.A. (2005) Performance comparison of heating control strategies combining simulation and experimental results. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA, pp. 563-570.

Lappas, V. and Wie, B. and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K. (2005) A solar kite mission to study the Earth's magneto-tail. JBIS, Journal of the British Interplanetary Society, 58 (1-2). pp. 23-31. ISSN 0007-084X

Leen, S.B. and Hyde, T.H. and Sabesan, R. and Pan, W. (2005) Simplified methods for prediction of elastic-plastic behaviour of complex structures with repeated structural units. Key Engineering Materials, 293-4. pp. 261-268. ISSN 1013-9826

Li, H. and Zhou, P. and Ma, X. (2005) Pattern recognition on diesel engine working condition by using a novel methodology - Hilbert spectrum entropy. Proceedings- Institute of Marine Engineering Science and Technology Part a Journal of Marine Engineering and Technology, A6. pp. 43-48. ISSN 1476-1548

Liu, X.M. and Jones, F.R. and Thomason, J.L. (2005) Selective adsorption of mixed organo silenes with differing reactive groups on E-glass surfaces. In: Interfaces and Interphases in Multicomponent Materials (IIMM), 2005-09-12 - 2005-09-14, Lyon, France.

Lockerby, D.A. and Reese, J.M. and Gallis, M.A. (2005) The usefulness of higher-order constitutive relations for describing the Knudsen layer. Physics of Fluids, 17 (10). p. 100609. ISSN 1070-6631

Macdonald, M. and Heiyantuduwa, M.A. and Harrison, D.K. and Bailey, R.T. and Rhodes, J. (2005) Literature review of web crippling behaviour. In: Proceedings of the 2nd Scottish Conference for Postgraduate Researchers of the Built and Natural Environment (PRoBE). UNSPECIFIED, Rotterdam, Netherlands, pp. 473-482.

Macdonald, M. and McInnes, C.R. (2005) Analytical control laws for planet-centred solar sailing. Journal of Guidance, Control and Dynamics, 28 (5). pp. 1038-1048. ISSN 0731-5090

Macdonald, M. and McInnes, C.R. (2005) Realistic Earth escape strategies for solar sailing. Journal of Guidance, Control and Dynamics, 28 (2). pp. 315-323. ISSN 0731-5090

Macdonald, M. and McInnes, C.R. (2005) Spacecraft planetary capture using gravity assist manoeuvres. Journal of Guidance, Control and Dynamics, 28 (2). pp. 365-369. ISSN 0731-5090

McInnes, C.R. (2005) Dynamics of a particle moving along an orbital tower. Journal of Guidance, Control and Dynamics, 28 (2). pp. 380-382. ISSN 0731-5090

McInnes, C.R. and Hiroaki, U. (2005) Penalty-function guidance for multiple satellite cluster formation. Journal of Guidance, Control and Dynamics, 28 (1). pp. 182-185. ISSN 0731-5090

McPherson, N.A. and Suarez-Fernandez, N. and Tan, H.C.P. and Lee, C.K. and Baker, T.N. (2005) Laser and laser assisted arc welding processes for DH 36 microalloyed steel ship plate. Science and Technology of Welding and Joining, 10 (4). pp. 460-467. ISSN 1362-1718

Pan, W. and Krohn, K. and Leen, S.B. and Hyde, T.H. and Walloe, S. (2005) A sigmoidal model for superplastic deformation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 219 (3). pp. 149-162. ISSN 1464-4207

Pang, Y. and Spathopoulos, M.P. (2005) On suboptimal control design for hybrid automata using predictive control techniques. In: Proceedings of the the 16th IFAC World Congress. Elsevier. ISBN 0-08-045108-X

Pethrick, R.A. and Banks, W.M. (2005) Dielectric studies on adhesively bonded composite joints. In: Society for Adhesion and Adhesives One Day Symposium on 'Bonding of Composite Materials', 2005-12-08, London.

Ponter, Alan R.S. and Chen, Haofeng (2005) Direct methods for limits in plasticity. Archives of Mechanics, 57 (2-3). p. 171.

Portugues, I. and Moore, P.J. and Sutton, S. and Johnstone, C. (2005) Vehicle mounted radiometric system for location of partial discharges. In: 3rd IEE international conference on reliability of transmission and distribution networks (RTDN 2005). Institution of Engineering and Technology, 303–307. ISBN 9780863414824

Prazeres, L.M.R. and Clarke, J.A. (2005) Qualitative analysis of the usefulness of perceptualisation techniques in communicating building simulation outputs. In: Procedings of the 9th International Building Performance Simulation Conference. IBPSA, pp. 961-968. ISBN 972-97973-2-3

Purandare, Y. and Stack, M.M. and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. WEAR, 259 (1-6). pp. 256-262. ISSN 0043-1648

Reese, J.M. and Lockerby, D.A. and Emerson, D.R. (2005) On hydrodynamic predictions of near-wall effects in rarefied gases: some phenomenological and modelling approaches. In: International Conference on Heat Transfer and Fluid Flow in Microscale, 2005-09-25 - 2005-09-30, Tuscany, Italy.

Rhodes, Jim and Zhao, Xiao-Ling and Binh, D.V. and Al-Mahaidi, Riadh (2005) Rational design analysis of stub columns fabricated using very high strength circular steel tubes. Thin-Walled Structures, 43 (3). pp. 445-460. ISSN 0263-8231

Stack, M.M. (2005) Bridging the gap between tribology and corrosion: from wear maps to Pourbaix diagrams - Runner-up for the Guy Bengough Award, IoM3, 2007. International Materials Reviews, 50 (1). pp. 1-17. ISSN 0950-6608

Stack, M.M. and Jana, B. (2005) Modelling particulate erosion-corrosion regime transitions Al/Al2O3 and Cu/Al2O3 MMCs in aqueous conditions. Tribology International, 38 (11-12). pp. 995-1006. ISSN 0301-679X

Stack, M.M. and Mathew, M.T. (2005) Transitions in microabrasion mechanisms for WC - Co (HVOF) coated steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 49-57. ISSN 1350-6501

Stack, M.M. and Williams, J. (2005) Tribology International - Guest Editorial. Tribology International, 38 (9). p. 785. ISSN 0301-679X

Trendafilova, I. (2005) A study on vibration-based damage detection and location in an aircraft wing scaled model. Applied Mechanics and Materials, 3-4. pp. 309-314. ISSN 1660-9336

Trendafilova, Irina (2005) An investigation on vibration-based damage detection in an aircraft wing scaled model. Key Engineering Materials, 293-4. pp. 321-328. ISSN 1013-9826

Tuohy, P.G. and McElroy, L.B. and Johnstone, C. (2005) Thermal mass, insulation and ventilation in sustainable housing - An investigation across climate and occupancy. In: Proceedings of the 9th IBPSA Conference, Building Simulation 2005. IBPSA.

Whitfield, R.I. and Duffy, A.H.B. and Kortabarria, L. (2005) Identifying and evaluating parallel design activities using the design structure matrix. In: Proceedings of the 15th International Conference on Engineering Design (ICED'05). Design Society. ISBN 0-85825-788-2

Wood, J. (2005) The FENET plate/shell fabrication procedural benchmark and "round robin" exercise. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005. NAFEMS.

Yokota, Y. and Shimada, Y. and Uchiyama, K. and Radice, G. and McInnes, C.R. (2005) Proximity manoeuvre control for chaser spacecraft using potential function guidance method. In: Proceedings of the JSASS/KSAS Joint International Symposium on Aerospace Engineering. JSASS/KSAS, pp. 265-268.

Yuan, Q. and Stack, M.M. and Chi, K. (2005) Comparison and analysis of two apparatus (IJR) and (RCE) used for erosion-corrosion in aqueous conditions. Journal of Iron and Steel Research International, 12 (4). pp. 54-59. ISSN 1006-706X

Zhang, Y.H. and Barber, Robert W. and Emerson, D.R. (2005) Particle separation in microfluidic devices - SPLITT fractionation and microfluidics. Current Analytical Chemistry, 1 (3). pp. 345-354. ISSN 1573-4110

Zhang, Y.H. and Gu, X.J. and Barber, R.W. and Emerson, D.R. (2005) Influence of the electric double layer on induced pressure fields and development lengths in electro-osmotic flows. Modern Physics Letters B, 19 (28-29). pp. 1655-1658. ISSN 0217-9849

Zhou, P. and Li, H. and Clelland, D. (2005) Pattern recognition on diesel engine working conditions by Wavelet Kullback-Leibler distance method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (9). pp. 879-887. ISSN 0954-4062

Grant, A.D. and Kelly, N.J. (2004) A ducted wind turbine simulation model for building simulation. Building Services Engineering Research and Technology, 25 (4). pp. 339-349. ISSN 0143-6244

Banks, W.M. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded CFRP structures subjected to ageing in various solvents. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 273-281. ISSN 1464-4207

Macdonald, M. and Rhodes, J. (2004) Stainless steel stub columns subject to combined bending and axial loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05, Orlando, Florida.

Walker, C.A. and Gray, T.G.F. and Nicol, A.C. and Chadwick, E.K.J. (2004) Evaluation of test regimes for stab-resistant body armour. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (4). pp. 355-363. ISSN 1464-4207

Zhang, B. and Baker, T.N. (2004) Effect of heat treatment on the hot deformation behaviour of AA6082 alloy. Journal of Materials Processing Technology, 153-154. pp. 881-885. ISSN 0924-0136

Lockerby, Duncan A. and Reese, Jason and Gallis, Michael A. (2004) The constitutive relations and boundary conditions for gas microflow modelling. In: Transport Phenomena in Micro and Nano Devices, 2004-10-17 - 2004-10-21, Hawaii,.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: ASC/ASTM-D30 Joint 19th Annual Technical Conference, 2004-10-17 - 2004-10-20, Atlanta, Georgia.

Abid, M. and Nash, D.H. (2004) Stress variation in flange of a non-gasketed flanged pipe joint during bolt up and operating conditions. In: 4th International Conference on Advanced Engineering Design, 2004-09-05 - 2004-09-08, Glasgow, UK.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates - Poster Presentation. In: The 2nd International Conference on Composites Testing and Model Identification, CompTest 04, 2004-09-21 - 2004-09-23, Bristol, UK.

Pang, Y. and Spathopoulos, M.P. (2004) On weighted time optimal control for linear hybrid automata using quantifier elimination. In: Proceedings of the 7th IFAC International Workshop on Discrete Event Systems, 2004-09-22 - 2004-09-24, Reims, France.

Tanimura, K. and Ujihashi, S. and Nash, D.H. and Dempster, W.M. (2004) Finite element analysis of the radial force cariation of a ring stent. In: JSME Mechanical Engineering Congress 2004, 2004-09-10 - 2004-09-11, Tokyo, Japan.

Taylor, I.J. and Vezza, M. and Salisbury, I. (2004) Numerical investigation of the effects of pedestrian barriers on aeroelastic stability of a proposed footbridge. In: Sixth UK Conference on Wind Engineering, 2004-09-15 - 2004-09-17, Cranfield, UK.

Macdonald, I. and Strachan, P.A. and Hand, J. (2004) CIBSE standard tests for the assessment of building services design software. Guide or manual. Chartered Institution of Building Services Engineers, London, UK.

Armstrong, G.S. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. Part 2 - Examination of the failure process and effects of drying. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (3). pp. 183-192. ISSN 1464-4207

Heim, D. and Clarke, J.A. (2004) Numerical modelling and thermal simulation of PCM-gypsum composites with ESP-r. Energy and Buildings, 36 (8). pp. 795-805. ISSN 0378-7788

Pethrick, R.A. and Armstrong, G.S. and Banks, W.M. and Crane, R.L. and Hayward, D. (2004) Dielectric and mechanical studies of the durability of adhesively bonded aluminium structures subjected to temperature cycling. part 1: examination of moisture absorption. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L3). pp. 169-182.

Bailey, C.L. and Barber, R.W. and Emerson, David and Lockerby, Duncan A. and Reese, Jason (2004) A critical review of the drag force on a sphere in the transition flow regime. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 743-748. ISBN 0-7354-0247-7

Lockerby, Duncan A. and Reese, Jason and Barber, R.W. and Emerson, David (2004) Geometric and constitutive dependence of Maxwell's velocity slip boundary condition. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 725-730. ISBN 0-7354-0247-7

Lockerby, Duncan A. and Reese, Jason and Gallis, Michael A. (2004) A wall-function approach to incorporating Knudsen-layer effects in gas micro flow simulations. In: Rarefied Gas Dynamics. AIP Conference Proceedings, 762 . American Institute of Physics, pp. 731-736. ISBN 0-7354-0247-7

Afendi, M. and Banks, W.M. and Kirkwood, D. (2004) Separating bubbles by superficial capillary flow. In: The 7th International Conference on Flow Processes in Composite Materials, 2004-07-12 - 2004-07-14, Delaware, USA.

Chen, Haofeng and Ponter, Alan R.S. (2004) A simplified creep-reverse plasticity solution method for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 23 (4). pp. 561-577. ISSN 0997-7538

Dadzie, K. and Meolans, J.G. (2004) Anisotropic scattering kernel and temperature jump at the wall. In: 24th International Symposium on Rarefied Gas Dynamics, Bari, Italy, 1900-01-01.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The study of reversible and irreversible impact loading on symmetrical and unsymmetrical CFRP composite laminates. In: The 4th International Conference on Computational and Experimental Engineering and Science, ICCES 04, 2004-07-26 - 2004-07-29, Madeira, Portugal.

Lockerby, Duncan A. and Reese, Jason M. and Emerson, D.R. and Barber, R.W. (2004) The velocity boundary condition at solid walls in rarefied gas calculations. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics, 70 (1). 017303. ISSN 1063-651X

Russell, C. and Nash, D.H. (2004) Development of a web-based interface for the automatic finite element analysis of pressure vessels. In: ASME Pressure Vessels and Piping Conference, 2004-07-25 - 2004-07-29, San Diego, USA.

Kelly, N.J. and Macdonald, I. (2004) Coupling CFD and visualisation to model the behaviour and effect on visibility of small particles in air. In: eSim2004, The Canadian Building Simulation Conference. European School for Industrial Mathematics (ESIM), pp. 153-160.

Thomason, J.L. (2004) Structure-processing-performance relationships of injection moulded thermoplastic composites at high fibre contents. In: 11th European Conference on Composite Materials: From Nano-scale Interactions to Engineering Structures, 2004-05-31 - 2004-06-03, Rhodes. (Unpublished)

Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836

Bourgeois, D. and Hand, J. and Macdonald, I. and Reinhart, C. (2004) Adding sub-hourly occupancy prediction, occupancy-sensing control and manual environment control to whole-building energy simulation. In: Proceedings of the Indoor Air Quality, Ventilation and Energy Conservation in Buildings Conference, 2004-06-09 - 2004-06-11, Vancouver, Canada.

Clarke, J.A. (2004) Conserving the balance - a personal view. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). i-ii. ISSN 0957-6509

Macdonald, I. (2004) Assessing the significance of design changes when simulating building performance including the effects of uncertain input data. In: Proceedings of ESim 04 Conference, 2004-06-09 - 2004-06-11, Vancouver, Canada.

Scanlon, T.J. and Stickland, M.T. (2004) A novel method for the provision of flight experience and flight testing for undergraduate aeronautical engineers at the University of Strathclyde. Aeronautical Journal, 108 (1084). pp. 315-318. ISSN 0001-9240

Spathopoulos, M.P. (2004) Non-blocking supervisory control for initialised rectangular automata. Asian Journal of Control, 6 (2). pp. 293-301. ISSN 1561-8625

Jiang, J. and Stott, F.H. and Stack, M.M. (2004) A generic model for dry sliding wear of metals at elevated temperatures. WEAR, 256 (9/10). pp. 973-985. ISSN 0043-1648

Dadzie, S.K. and Méolens, J.G. (2004) Anisotropic scattering kernel: generalized and modified Maxwell boundary conditions. Journal of Mathematical Physics, 45 (5). pp. 1804-1819. ISSN 0022-2488

Argiriou, A.A. and Bellas-Velidis, I. and Kummert, M. and Andre, P. (2004) A neural network controller for hydronic heating systems of solar buildings. Neural Networks, 17 (3). pp. 427-440. ISSN 0893-6080

Bloem, J.J. and Baker, P.H. and Strachan, P.A. (2004) Energy performance of buildings and the integration of photovoltaics. In: International Conference on Improving Energy Efficiency in Commercial Buildings (IEECB 04), 2004-04-19 - 2004-04-21, Frankfurt, Germany.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836

Zhang, Y.H. and Emerson, D.R. (2004) Effect of flow development region and fringing magnetic force field on annular split-flow thin fractionation. Journal of Chromatography A, 1042 (1-2). pp. 137-145. ISSN 00219673

Lee, C.K. and Candy, J. and Tan, H.C.P. (2004) Measurement and finite element analysis of temperature distribution in arc welding process. International Journal of Computer Applications in Technology, 21 (4). pp. 171-177. ISSN 0952-8091

Stack, M.M. and Jawan, H. and Mathew, M.T. (2004) Some thoughts on micro-abrasion mapping of steels in corrosive environments. In: 8th International Conference on Tribology, 2004-03-24 - 2004-03-27, Pretoria, South Africa.

Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. WEAR, 256 (5). pp. 565-576. ISSN 0043-1648

Lubis, A. and Boyle, J.T. (2004) The pressure reduction effect in smooth piping elbows - revisited. International Journal of Pressure Vessels and Piping, 81 (2). pp. 119-125. ISSN 0308-0161

Spence, J. and Nash, D.H. (2004) Milestones in pressure vessel technology. International Journal of Pressure Vessels and Piping, 81 (2). pp. 89-118. ISSN 0308-0161

Scanlon, T.J. and Stickland, M.T. (2004) A numerical analysis of buoyancy-driven melting and freezing. International Journal of Heat and Mass Transfer, 47 (3). pp. 429-436. ISSN 0017-9310

Abid, M. and Nash, D.H. (2004) A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions. International Journal of Pressure Vessels and Piping, 81 (1). pp. 67-74. ISSN 0308-0161

Abo-Elnor, M. and Hamilton, R. and Boyle, J.T. (2004) Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis. Soil and Tillage Research, 75 (1). pp. 61-73. ISSN 0167-1987

Alsop, S. and McLean, R.F. and Fleming, J.S. (2004) Defeating Nyquist. In: Vibrations in Rotating Machinery (IMechE). IMechE conference transactions (2004-2). Wiley, pp. 281-290. ISBN 1860584470

Bookless, J. and McInnes, C.R. (2004) Dynamics stability and control of displaced non-Keplerian orbits. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 173.

Born, F. and Clarke, J.A. and Johnstone, C. (2004) Development of a simulation-based decision support tool for renewable energy integration and demand-supply matching. In: Proceedings of ESim 04 Conference, Vancouver. IBPSA. ISBN 2-551-17239-X

Bradley, D.E. and Kummert, M. (2004) Converging on a recommended set of interpretations and assumptions in applying standard tests to energy analysis tools. In: Proceedings of SimBuild 2004, IBPSA-USA Conference on Building Sustainability and Performance Through Simulation. IBPSA.

Bradley, D.E. and Kummert, M. and McDowell, T.P. (2004) Experiences with and interpretation of standard test methods of building energy analysis tools. In: Proceedings of the IBPSA-Canada Bi-Annual Conference, eSIM 2004. IBPSA.

Burkholder, F.W. and Kummert, M. (2004) TRNSYS modeling of a hybrid lighting system. In: TRNSYS Users Conference, 2004-03-01, Stuttgart, Germany.

Camilleri, D. and Gray, T.G.F. and Comlekci, T. (2004) Use of thermography to calibrate fusion welding procedures in virtual fabrication applications. In: InfraMation 2004. Infrared Training Centre.

Cartmell, M. and McInnes, C.R. and McKenzie, D. (2004) Proposals for an Earth-Moon mission design based on motorised momentum exchange tethers. In: Proceedings of the XXXII Summer School on Advanced Problems in Mechanics, APM 2004, St Petersburg. IPME RAS.

Chen, Haofeng and Ponter, Alan R.S. (2004) Integrity assessment for a tubeplate using linear matching method. International Journal of Pressure Vessels and Piping, 81. pp. 327-336. ISSN 0308-0161

Clarke, J.A. and Connor, S. and Fujii, G. and Geros, V. and Johannesson, G. and Johnstone, C. and Karatasou, S. and Kim, J.M. and Santamouris, M. and Strachan, P.A. (2004) The role of simulation in support of internet-based energy services. Energy and Buildings, 36 (8). pp. 837-846. ISSN 0378-7788

Clarke, J.A. and Johnstone, C. and Kondratenko, I. and Lever, M. and McElroy, L.B. and Prazeres, L.M.R. and Strachan, P.A. and McKenzie, F. and Peart, G. (2004) Using simulation to formulate domestic sector upgrading strategies for Scotland. Energy and Buildings, 36 (8). pp. 759-770. ISSN 0378-7788

Clarke, J.A. and Grant, A.D. and Johnstone, C. (2004) Output characteristics of tidal current power stations. In: Proceedings of the 14th (2004) International Offshore and Polar Engineering Conference Proceedings. International Offshore and Polar Engineering Conference Proceedings, 1 . International Society of Offshore and Polar Engineers (ISOPE), Cupertino, pp. 113-119. ISBN 1880653621

Clarke, J.A. and Tang, D. (2004) A co-operating solver approach to building simulation. In: Proceedings of ESim 04 conference. IBPSA. ISBN 2-551-17239-X

Craighead, I.A. and Gray, T.G.F. (2004) Investigation of diesel generator shaft and bearing failures. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 218 (3). pp. 153-158. ISSN 1464-4193

Doo, G. and McNaught, J.M. and Dempster, W.M. (2004) Shellside evaporation in a TEMA e-shell : flow pattern and transition. Applied Thermal Engineering, 24 (8-9). pp. 1195-1205. ISSN 1359-4311

Fernandez, J. and Blanco, E. and Parrondo, J. and Stickland, M.T. and Scanlon, T.J. (2004) Performance of a centrifugal pump running in inverse mode. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 218 (4). pp. 265-271. ISSN 0957-6509

Galbraith, G.H. and Kelly, D.J. and McLean, R.C. (2004) Moisture permeability measurements under reduced barometric pressures. Materials and Structures, 37 (269). pp. 311-317. ISSN 1359-5997

Hiroaki, U. and McInnes, C.R. (2004) Fuel-optimum near-miss avoidance control for clustered satellites. In: Proceedings of the 18th International Symposium on Space Flight Dynamics. European Space Agency, p. 1093. ISBN 929092859X

Hobbs, Dan and Morbitzer, Christoph and Spires, Brian and Strachan, Paul and Webster, Jim (2004) Experience of using building simulation within the design process of an architectural practice. Building Services Engineering Research and Technology, 14 (1). pp. 43-50. ISSN 0143-6244

Hughes, G.W. and Macdonald, M. and McInnes, C.R. and Atzei, A. and Falkner, P. (2004) Analysis of a solar sail mercury sample return mission. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 197.

Hughes, G.W. and McInnes, C.R. (2004) Small-body encounters using solar sail propulsion. Journal of Spacecraft and Rockets, 41 (1). pp. 140-150. ISSN 0022-4650

Johnston, R. and McIvor, A.J. (2004) Oral history, subjectivity, and environmental reality: occupational health histories in twentieth-century scotland. In: OSIRIS:Landscapes of Exposure: Knowledge and Illness in Modern Environments. Osiris, 2nd Series, 19 . JSTOR, United States, pp. 234-249. ISBN 0–226–53251–8

Johnstone, C. and Nielsen, K. and Lewis, T. and Sarmento, A. and Lemonis, G. (2004) A European platform for the integration and sharing of research and technical development activities in ocean energy systems. In: Proceedings of the 8th World Renewable Energy Congress, 2003-08-29 - 2003-09-03, Denver, USA.

Kim, J.M. and Clarke, J.A. (2004) The EnTrak system: supporting energy action planning via the Internet. In: Proceedings of the Congress of Tall Buildings Urban Habitats (CTBUH). ASME.

Kummert, M. (2004) Improvements to the TRNSYS kernel and standard library. In: European TRNSYS Users Conference, 1900-01-01.

Kummert, M. and Bradley, D.E. and McDowell, T.P. (2004) Combining different validation techniques for continuous software improvement - Implications in the development of TRNSYS 16. In: Proceedings of the IBPSA-Canada Bi-Annual Conference, eSIM 2004. IBPSA.

Lappas, V. and Wie, B. and McInnes, C.R. and Tarabini, L. and Gomes, L. and Wallace, K. (2004) A solar kite mission to study the Earth's magneto-tail, Paper IAC 04-U.P.01. In: Proceedings of the 55th International Astronautical Congress. International Astronautical Federation, p. 194. ISBN 1604236477

Lazarov, B.S. and Trendafilova, I. (2004) An investigation on vibration-based damage diagnosis in thin plates. In: Proceedings of the Second European Workshop on Structural Health Monitoring. Destech Publications, pp. 76-82. ISBN 1-932078-41-X

Li, Y. and Wilson, J.A. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2004) The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels. ISIJ International, 44 (6). pp. 1093-1102. ISSN 0915-1559

Lyngvi, A. and Falkner, P. and Rando, N. and Atzei, A. and Peacock, A. and McInnes, C.R. and Hughes, G.W. and Macdonald, M. (2004) Technology reference studies using solar sails. In: Proceedings of Solar Sail Technology and Applications Conference, 2004-09-01, Greenbelt, Maryland.

MacKintosh, A.R. and Pethrick, R.A. and Banks, W.M. (2004) Development of novel urethane composites for vibrational control. In: 11th European Conference on Composite Materials: From Nano-scale Interactions to Engineering Structures, 2004-05-31 - 2004-06-03, Rhodes.

Macdonald, M. and Kotelko, M. and Rhodes, J. and Kolakowski, Z. (2004) Comparative study into load-capacity of lipped channel columns under compression. In: Fourth International Conference on Coupled Instability of Metal Structures (CIMS 04), 2004-09-27 - 2004-09-29, Rome, Italy.

Macdonald, M. and McInnes, C.R. and Hughes, G.W. (2004) A near-term roadmap for solar sailing. In: Proceedings of the 55th International Astronautical Congress. American Institute of Aeronautics and Astronautics, p. 96.

Macdonald, M. and Hughes, G.W. (2004) Solar sailing. In: Proceedings of Summer Workshop on Advanced Topics in Astrodynamics, 2004-07-01, Barcelona, Spain.

Macdonald, M. and Rhodes, J. (2004) Finite element modelling of cold formed stainless steel columns. Acta Polytechnica Scandinavica Applied Physics Series, 45 (3). pp. 92-98. ISSN 0355-2721

Macdonald, Martin and Rhodes, James (2004) Failure loads of stainless steel stub columns subject to varying bending and axial loading. In: Proceedings of the 4th International Conference on Thin-Walled Structures(ICTWS 04). CRC Press, pp. 581-594. ISBN 9780750310062

Macdonald, Martin and Rhodes, James (2004) Material properties of cold formed stainless steel structural sections. In: Proceedings of the 3rd International Conference on Computer Modelling and Simulation of Materials. Advances in science and technology (Faenza, Italy) (42). Techna Group, Faenza, Italy, pp. 733-742. ISBN 88-86538-45-6

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2004) Shakedown behaviour of thick cylindrical vessels with crossholes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (3). pp. 133-141. ISSN 0954-4089

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2004) Stress concentration at crossholes in thick cylindrical vessels. Journal of Strain Analysis for Engineering Design, 39 (5). pp. 471-481. ISSN 0309-3247

McDowell, T.P. and Bradley, D.E. and Thornton, J.W. and Kummert, M. (2004) Simulation synergy: expanding TRNSYS capabilities and usability. In: Proceedings of SimBuild 2004, IBPSA-USA Conference on Building Sustainability and Performance Through Simulation. IBPSA.

McInnes, C.R. (2004) Deflection of near-Earth asteroids by kinetic energy impacts from retrograde objects. Planetary and Space Science, 52 (7). pp. 587-590. ISSN 0032-0633

McInnes, C.R. (2004) Delivering fast and capable missions to the outer solar system. Advances in Space Research, 34 (1). pp. 184-191. ISSN 0273-1177

McInnes, C.R. (2004) Solar Sailing: Technology, Dynamics and Mission Applications. Springer-Praxis Series in Space Science and Technology . Springer. ISBN 185233102X

McIvor, Arthur and Johnston, R. (2004) Dangerous Work, Hard Men and Broken Bodies: Masculinity in the Clydeside Heavy Industries. Labour History Review, 69 (2). pp. 135-52. ISSN 0961-5652

McKay, S. (2004) A Stereoscopic Display. PCT/GB2004/001364.

Melas, D.A. and Craighead, I.A. and Esat, I.I. (2004) An experimental study for measuring the natural frequency of the timing belt. International Journal of Vehicle Design, 35 (3). pp. 274-288. ISSN 0143-3369

Morbitzer, C. and Strachan, P.A. and Simpson, C.J. (2004) Data mining analysis of building simulation performance data. Building Services Engineering Research and Technology, 25 (3). pp. 253-267. ISSN 0143-6244

Nash, D.H. and Abid, M. (2004) Surface sensitivity study of non-gasketed flange joint. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 205-212. ISSN 0954-4089

Phillpot, C. and Dempster, W.M. and Deans, J. (2004) The condensation of ammonia-water mixtures in a small experimental shell and tube condenser. In: Proceedings of the 4th European Thermal Sciences Conference. Eurotherm.

Ponter, Alan R.S. and Chen, Haofeng and Willis, M. and Evans, J. (2004) Fatigue-creep and plastic collapse of notched bars. Fatigue and Fracture of Engineering Materials and Structures, 27. pp. 305-318. ISSN 8756-758X

Rhodes, J. (2004) Postbuckling behaviour and interaction of different buckling modes in thin-walled members - Invited Keynote Lecture. In: Proceedings of the 4th International Conference on Thin-Walled Structures(ICTWS 04). CRC Press. ISBN 9780750310062

Rhodes, J. (2004) Recent developments of simple user friendly microcomputer programs for thin-walled structures applications. In: International Workshop on Recent Advances and Future Trends in Thin-Walled Structures Technology. Canopus Publishing Limited, p. 256.

Rhodes, J. (2004) Recent developments of simple user friendly microcoomputer programs for thin-walled structures applications. In: Proceedings of the International Workshop, Thin-Walled Structures - Recent Advances and Future Trends in Thin-Walled Structures Technology, Loughborough, UK. Loughborough University. ISBN 0953786897

Rhodes, J. and Macdonald, M. (2004) Channel section beams subject to static and dynamic loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05, Orlando, Florida.

Scanlon, T.J. and Stickland, M.T. (2004) A numerical analysis of thermosolutal melting. In: Proceedings of the 11th ASME/ZSIS International Thermal Science Seminar. ASME, pp. 711-716.

Spathopoulos, M.P. and Fragopoulos, D. (2004) Pendulation control of an offshore crane. International Journal of Control, 77 (7). pp. 654-670. ISSN 0020-7179

Spathopoulos, M.P. and Komenda, J. (2004) Discussion on: Supervisory control of discrete event systems with flexible marking. European Journal of Control, 10 (1). pp. 61-64. ISSN 0947-3580

Stack, M.M. (2004) Editorial Article. WEAR, 256 (9-10). pp. 855-856. ISSN 0043-1648

Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system: some comments on particle size effects. WEAR, 256 (5). pp. 557-564. ISSN 0043-1648

Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. WEAR, 256 (9-10). pp. 986-1004. ISSN 0043-1648

Stack, M.M. and Mathew, M.T. (2004) Mapping the micro-abrasion resistance of WC/Co based coatings in aqueous conditions. Surface and Coatings Technology, 183 (2-3). pp. 337-346. ISSN 0257-8972

Stack, M.M. and Mathew, M.T. (2004) Some comments on micro-abrasion interactions for pure metals in bio-oils. Journal of Synthetic Lubrication, 21 (2). pp. 105-118. ISSN 0265-6582

Stack, M.M. and Purandare, Y. and Hovsepian, P. (2004) Impact angle effects on the erosion - corrosion of superlattice CrN/NbN PVD coatings. Surface and Coatings Technology, 188-189. pp. 556-565. ISSN 0257-8972

Stack, M.M. (2004) There's something in the way you move - horse racing and skiing are two sports where a better understanding of friction could work. Physics World, 11. pp. 24-25. ISSN 0953-8585

Stack, Margaret (2004) Prediction of erosive wear in the power industry-some new horizons. UK Power Magazine, 1. pp. 65-67.

Tenchev, R.T. and MacKenzie, J.A. and Scanlon, T.J. and Stickland, M.T. (2004) Finite element moving mesh analysis of phase change problems with natural convection. International Journal of Heat and Fluid Flow, 26 (4). pp. 597-612. ISSN 0142-727X

Thomason, J.L. (2004) Glass fibres for composites reinforcement: a presentation on how glass fibre is manufactured. In: Seminar, University of Sheffield, 1900-01-01, Sheffield, UK.

Trendafilova, I. and Imbabi, M. (2004) Novel health monitoring procedure for reinforced concrete slabs. Applied Mechanics and Materials, 1-2. pp. 65-70. ISSN 1660-9336

Wallace, M.S. and Dempster, W.M. and Scanlon, T.J. and Peters, J. and McCulloch, S. (2004) Prediction of impact erosion in valve geometries. WEAR, 256 (9-10). pp. 927-936. ISSN 0043-1648

Wood, J. (2004) Glasgow's contribution to science and engineering across the FENET business sectors. In: 7th FENET Technology Workshop, 2004-10-07, Glasgow.

Wood, J. (2004) Procedural benchmarks for common fabrication details in plate/shell structures. In: FENET Multi-physics and Analysis Workshop, 2004-03-25, Mallorca, Spain.

Zhang, Yonghao and Gu, Xiao-Jun and Barber, Robert W. and Emerson, David R. (2004) An analysis of induced pressure fields in electroosmotic flows through microchannels. Journal of Colloid and Interface Science, 275 (2). pp. 670-678. ISSN 0021-9797

McInnes, Colin R. (2003) Solar sailing: mission applications and engineering challenges. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 361 (1813). pp. 2989-3008. ISSN 1364-503X

Reese, Jason M. and Gallis, Michael A. and Lockerby, Duncan A. (2003) New directions in fluid dynamics : Non-equilibrium aerodynamic and microsystem flows. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 361 (1813). pp. 2967-2988. ISSN 1364-503X

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2003) XRD and XPS studies on surface MMC layer of SiC reinforced Ti-6Al-4V alloy. Journal of Materials Processing Technology, 142 (3). pp. 725-737. ISSN 0924-0136

MacKenzie, P.M. and Walker, C.A. (2003) Assessment of the shape of crack-tip plastic zones as a function of applied load. In: Handbook of Moiré Measurement. Institute of Physics, Bristol, UK, pp. 51-55. ISBN 0750305223

Thomsen, O.T. and Banks, W.M. (2003) An improved model for the prediction of intra-cell buckling in CFRP sandwich panels under in-plane compressive loading. Composite Structures, 65 (3-4). pp. 259-268. ISSN 0263-8223

Zhang, Y.L. and Gorman, D. and Reese, J.M. (2003) Vibration of pre-stressed thin cylindrical shells conveying fluid. Thin-Walled Structures, 41 (12). pp. 1103-1127. ISSN 0263-8231

Gorman, Daniel G. and Lee, Chee K. and Reese, Jason M. and Horáček, Jaromir (2003) Free vibration analysis of a basic structural/gas/liquid interacting system. Materials Science Forum, 440-1. pp. 381-388. ISSN 0255-5476

Clarke, J.A. (2003) IT systems for energy and environment monitoring, planning, design and control. In: Solar Thermal Technologies for Buildings: The State of the Art. Buildings, Energy and Solar Technology . Earthscan Publications Ltd, p. 256. ISBN 9781902916477

McPherson, N.A. and Samson, H. and Suarez-Fernandez, N. and Baker, T.N. (2003) Steel microstructures in autogeneous laser welds. Journal of Laser Applications, 15 (4). pp. 200-201. ISSN 1042-346X

Muscat, M. and MacKenzie, D. (2003) Elastic shakedown analysis of axisymmetric nozzles. Journal of Pressure Vessel Technology, 125 (4). pp. 365-370. ISSN 0094-9930

Carus, D. and Doyle, M.J. (2003) The EU PACKAGE project. In: Faraday Packaging Partnership Conference, 2002-04-01, Leeds, UK.

Nicol, David J. and Boyle, James T. (2003) Peer instruction versus class-wide discussion in large classes: a comparison of two interaction methods in the wired classroom. Studies in Higher Education, 28 (4). pp. 457-473. ISSN 0307-5079

Spence, J. and Nash, D.H. (2003) Parametric plastic collapse loads and their validation for horizontal saddle supported storage vessels. In: International Conference on Design, Inspection, Maintenance and Operation of Cylindrical Steel Tanks and Pipelines, 2003-10-08 - 2003-10-11, Kralupy, Czech Republic.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) The Influence of Oxide Film Defects on the Mechanical Strength of Al Castings. In: Proceedings of the European Metallurgy Conference, EMC 03, Hannover, Germany, 2003-01-01, Hannover, Germany.

Zhang, Y.L. and Reese, J.M. and Gorman, D.G. (2003) An experimental study of the effects of pulsating and steady internal fluid flow on an elastic tube subjected to external vibration. Journal of Sound and Vibration, 266 (2). pp. 355-367. ISSN 0022-460X

Heck, H. and Clemens, D. and Reins, F. and Carus, D. and Doyle, M.J. (2003) Alternative access to product information on consumer packages in supermarkets and in smart home environments. In: 7th European AAATE Conference: Shaping the Future, 2003-08-30 - 2003-09-03, Dublin, Ireland.

Afendi, M. and Banks, W.M. and Kirkwood, D. (2003) The means to void content reduction in vacuum infusion process. In: Proceedings of the ACMC/SAMPE Conference on Marine Composites : Sherwell Centre, University of Plymouth, 11-12 September 2003. Advanced Composites Manufacturing Centre, School of Engineering, University of Plymouth, Plymouth, UK. ISBN 1870918029

Bailly, D. and Campbell, M. and Poffa, N. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. and Nielsen, G.G. (2003) Moisture transport studies in building materials. In: Proceedings of the 12th Institute of Physics Conference on Sensors and their Applications, 2003-09-02 - 2003-09-04, Limerick, Ireland.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Tan, H.C.P. and Gray, T.G.F. (2003) Investigation of temperature transients during flux-cored CO2 butt welding of CMn steel plates. In: International Conference on Metal Fabrication and Welding Technology, 2003-09-16 - 2003-09-18, Nottingham, UK.

Clarke, J.A. and Grant, A.D. and Johnstone, C. (2003) Development and performance evaluation of novel rotor-generators for tidal current energy conversion. In: Proceedings of the 6th Annual Parsons Turbine Conference. Maney Publishing. ISBN 1-904350-20-8

Galbraith, G.H. and Kelly, D. and McLean, R.C. (2003) Alternative methods for measuring moisture transfer coefficients of building materials. In: Proceedings of the 2nd International Conference on Building Physics, 2003-09-14 - 2003-09-18, Leuven, Belgium.

McElroy, L.B. and Clarke, J.A. and Elrick, B.F. and Telfer, S. (2003) Putting theory into practice: using simulation to meet new building performance legislation requirements. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institution of Building Services Engineers (CIBSE). Chartered Institution of Building Services Engineers (CIBSE). ISBN 190328743X

Nash, D.H. and Spence, J. (2003) The buckling and collapse behaviour of saddle-supported cylinders - Keynote Lecture. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12, Zakopane, Poland.

Palmer, D. and Tamburrini, M. and Macdonald, I. (2003) Quality assurance of simulation in an engineering practice. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference, 2003-09-24 - 2003-09-26, Edinburgh, UK.

Strang, A. and Conroy, R.D. and Banks, W.M. and Blackler, M. and Leggett, J. and McColvin, G.M. and Simpson, S. and Smith, M. (2003) Parsons 2003, engineering issues in turbine machinery, power plant and renewables: Proceedings of the Sixth International Charles Parsons Turbine Conference 16-18 September 2003 Trinity College Dublin, Ireland. Maney, London, UK. ISBN 1-904350-20-8

Sun, J. and Campbell, M. and Bailly, D. and Poffa, N. and Galbraith, G.H. and McLean, R.C. and Sanders, C.H. and Nielsen, G.G. (2003) Imaging techniques for structures using X- and y- photons. In: Proceedings of the 12th Institute of Physics Conference on Sensors and their Applications, 2003-09-02 - 2003-09-04, Limerick, Ireland.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093

Andre, P. and Kelly, N.J. and Boreaux, J.J. and Lacote, P. and McAdam, C.P. (2003) Different approaches for the simulation of an experimental building hosting a climate chamber devoted to artificial fog production. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14, Eindhoven.

Grant, A.D. and Kelly, N.J. (2003) The development of a ducted wind turbine simulation model. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association, pp. 407-414.

Bolmsjo, G. and Lorentzon, U. and Vatau, M. and Doyle, M.J. and Carus, D. and Topping, M. (2003) Development and integration of package opening devices with a flexible robot in a smart home environment. In: Proceedings of the 7th European AAATE Conference: Shaping the Future. Assistive Technology Research Series . IOS Press, Amsterdam, Netherlands. ISBN 9781586033736

Chow, T.T. and Clarke, J.A. and Song, C.L. (2003) The role of primitive part modelling within an integrative simulation environment. In: Proceedings of the 8th international building performance simulation association conference. IBPSA, pp. 187-194. ISBN 9038615663

Clarke, J.A. and Conner, S. and Geros, V. and Johnstone, C. and Karatasou, S. and Kim, J.M. and Santamouris, M. and Strachan, P.A. (2003) Simulation support for internet-based energy services. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, pp. 187-194. ISBN 90-386-1566-3

Clarke, J.A. and Johnstone, C. and Lever, M. and McElroy, L.B. and McKenzie, F. and Peart, G. and Prazeres, L.M.R. and Strachan, P.A. (2003) Simulation support for the formulation of domestic sector upgrading strategies. In: Proceedings of the 8th International Building Performance Simulation Association Conference, Eindhoven. IBPSA, pp. 219-226. ISBN 90-386-1566-3

Macdonald, I. (2003) Applying uncertainty considerations to building energy conservation equations. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14, Eindhoven.

McDougall, S. and Hand, J. (2003) Using simulation to move from daylighting issues to first use of the new UK carbon emissions calculation method. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14, Eindhoven.

McInnes, C.R. and Hughes, G.W. and Macdonald, M. (2003) Low cost Mercury orbiter and Mercury sample return missions using solar sail propulsion. Aeronautical Journal, 107 (1074). pp. 469-478. ISSN 0001-9240

Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. WEAR, 255 (1-6). pp. 14-22. ISSN 0043-1648

Tamburrini, M. and Palmer, D. and Macdonald, I. (2003) Calibrating models for simulation use in design practice. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14, Eindhoven.

Chow, T.T. and Hand, J. and Strachan, P.A. (2003) Building-integrated photovoltaic and thermal applications in a subtropical hotel building. Applied Thermal Engineering, 23 (16). pp. 2035-2049. ISSN 1359-4311

Zhang, Y.H. and Emerson, D.R. and Reese, J.M. (2003) General theory for flow optimisation of split-flow thin fractionation. Journal of Chromatography A, 1010 (1). pp. 87-94. ISSN 0021-9673

Lockerby, D.A. and Reese, J.M. (2003) High-resolution Burnett simulations of micro Couette flow and heat transfer. Journal of Computational Physics, 188 (2). pp. 333-347. ISSN 0021-9991

Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Inertial errors of forceplate analysis of artificial turf. In: Proceedings of XIXth Congress of the International Society of Biomechanics, The Human Body in Motion, Dunedin, New Zealand, 2003-07-06 - 2003-07-11, Dunedin, New Zealand.

Blackburn, S.J. and Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Player/ground interactions on artificial turf. In: Proceedings of XIXth Congress of the International Society of Biomechanics, The Human Body in Motion, Dunedin, New Zealand, 2003-07-06 - 2003-07-11, Dunedin, New Zealand.

Brachet, P. and Blackburn, S.J. and Nicol, A.C. and Walker, C.A. (2003) Body and limb accelerations during football activities on artificial turf. In: Proceedings of XIXth Congress of the International Society of Biomechanics, The Human Body in Motion, Dunedin, New Zealand, 2003-07-06 - 2003-07-11, Dunedin, New Zealand.

Brachet, P. and Nicol, A.C. and Walker, C.A. (2003) Mechanical properties of an artificial turf using servo-hydraulic and drop-weight impact testers. In: Proceedings of XIXth Congress of the International Society of Biomechanics, The Human Body in Motion, Dunedin, New Zealand, 2003-07-06 - 2003-07-11, Dunedin, New Zealand.

Gachagan, A. and Hailu, B. and McNab, A. and Lang, W. and Hendry, J. and Hayward, G. and Banks, W. (2003) Impact on the mechanical integrity of carbon fibre reinforced composite plates incorporating embedded piezoceramic transducers. In: 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2003-07-27 - 2003-08-01, Green Bay.

Nash, D.H. and Banks, W.M. (2003) Eliminating local strain concentrations on GRP beam supported transportation. In: 10th International Conference on Pressure Vessel Technology (ICPVT-10), 2003-07-07 - 2003-07-10, Vienna, Austria.

Nash, D.H. and Spence, J. and Tooth, A.S. (2003) On the plastic collapse of horizontal saddle supported storage vessels. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, Design by Analysis, 2003-07-07 - 2003-07-10, Vienna, Austria.

Spence, J. and Nash, D.H. (2003) Some milestones in pressure vessel technology: The Nichols Memorial Lecture - Keynote Lecture. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, 2003-07-07 - 2003-07-10, Vienna, Austria.

Beausoleil-Morrison, I. and Clarke, J.A. (2003) An adaptive conflation between computational fluid dynamics and thermal simulation for modelling indoor air flow and convective heat transfer at internal building surfaces. American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Transactions, 109 (2). pp. 743-756. ISSN 0001-2505

Carles, P. and Dadzie, K. and Zhong, F. (2003) The piston effect as a means to measure near-critical bulk viscosity. In: UNSPECIFIED.

Trontis, A. and Spathopoulos, M.P. (2003) On the control synthesis for target problems in continuous and hybrid systems using level set methods. In: Proceedings of the 11th IEEE Mediterranean Conference on Control and Automation MED 03, 2003-06-17 - 2003-06-20, Rhodes, Greece.

Shih, M. and Banks, W.M. (2003) New design concept of epoxy resin formulation applied to fibre reinforced plastics. In: Society for the Advancement of Materials and Process Engineering Conference, SAMPE 03, 2003-05-11 - 2003-05-15, Long Beach, USA.

Brodesser, M. and Banks, W.M. and Pethrick, R.A. and Casey, N. and Brown, J. (2003) The chemical compatibility of thermoplastic hose used in umbilicals. In: Proceedings of the 13th (2003) international offshore and polar engineering conference. International Offshore and Polar Engineering Conference Proceedings . International Society of Offshore & Polar Engineers, Cupertino, pp. 1-7. ISBN 1880653605

Fleming, J.S. and Yan, Y. (2003) The prediction of vapour-liquid equilibrium behaviour of HFC blend-oil mixtures from commonly available data. International Journal of Refrigeration, 26 (3). pp. 266-274. ISSN 0140-7007

Wood, J. and Nash, D.H. (2003) Some observations on the education and professional development of finite element users. In: Proceedings of the NAFEMS World Congress on Innovative Engineering Simulation Technology, 2003-05-27 - 2003-05-31, Orlando, USA.

Zhang, Y.H. and Reese, J.M. (2003) Gas turbulence modulation in a two-fluid model for gas-solid flows. AIChE Journal, 49 (12). pp. 3048-3065. ISSN 0001-1541

Comlekci, T. and Camilleri, D. and Gray, T.G.F. (2003) Finite element representation on experimental surface deformation data from fusion welded plates. In: Computational Mechanics in the UK : proceedings of the 11th ACME-UK 2003 Conference. University of Strathclyde, Glasgow, UK, pp. 33-36.

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H. (2003) Horizontal saddle supported storage vessels - a parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Wiley, pp. 109-135. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H. (2003) Horizontal saddle supported storage vessels - theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Wiley, pp. 87-107. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H. (2003) Horizontal saddle-supported storage vessels: A parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 109-138. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H. (2003) Horizontal saddle-supported storage vessels: Theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 87-108. ISBN 978-1-86058-401-5

Zhang, Y.H. and Reese, J.M. (2003) Continuum modelling of granular particle flow with inelastic inter-particle collisions. Chemical Engineering Research and Design, 81 (4). pp. 483-488. ISSN 0263-8762

Zhang, Y.H. and Reese, J.M. (2003) The drag force in two-fluid models of gas-solid flows. Chemical Engineering Science, 58 (8). pp. 1641-1644. ISSN 0009-2509

McPherson, N.A. and Chi, K. and Baker, T.N. (2003) Submerged arc welding of stainless steel and the challenge from the laser welding process. Journal of Materials Processing Technology, 134 (2). pp. 174-179. ISSN 0924-0136

Citherlet, Stéphane and Macdonald, Iain (2003) Integrated assessment of thermal performance and room acoustics. Energy and Buildings, 35 (3). pp. 249-255. ISSN 0378-7788

Pan, W. and Wheel, M. (2003) A finite volume method for solid mechanics incorporating rotational degrees of freedom. Computers and Structures, 81 (5). pp. 321-329. ISSN 0045-7949

McPherson, N.A. and Chi, K. and McLean, M.S. and Baker, T.N. (2003) Structure and properties of carbon steel to duplex stainless steel submerged arc welds. Materials Science and Technology, 19 (2). pp. 219-226. ISSN 0267-0836

Stickland, M.T. and Scanlon, T.J. and Fernandez-Francos, J. and Blanco, E. (2003) Measurement of rotating flows using PIV and image derotation. Experiments in Fluids, 34 (2). pp. 304-306. ISSN 0723-4864

Zaras, J. and Kowal-Michalska, K. and Rhodes, J. (2003) Buckling strength and failure mechanics of thin-walled structures. Thin-Walled Structures, 41 (2-3). pp. 89-90. ISSN 0263-8231

Abo-Elnor, M. and Hamilton, R. and Boyle, J.T. (2003) 3D Dynamic analysis of soil-tool interation using the finite element method. Journal of Terramechanics, 40 (1). pp. 51-62. ISSN 0022-4898

Macdonald, M. and Rhodes, J. and Kotelko, M. (2003) Load capacity of combined steel/aluminium members under bending action - experimental study. In: 16th Science Conference on The Problems in Development of Heavy Duty Machines, 2003-01-01, Zakopane, Poland.

Abid, M. and Nash, D.H. (2003) Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions. International Journal of Pressure Vessels and Piping, 80 (12). pp. 831-841. ISSN 0308-0161

Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2003) Investigation of the solvent uptake in adhesively bonded CFRP joints using non-destructive dielectric and destructive mechanical techniques. In: 14th International Conference on Composite Materials, 2003-07-14 - 2003-07-18, San Diego.

Banks, W.M. and Nash, D.H. (2003) Pressure Equipment Technology: Theory and Practice. Wiley. ISBN 978-1-86058-401-5

Camilleri, D. and Comlekci, T. and Lee, C.K. and Gray, T.G.F. (2003) Out-of-plane distortion of CMn steel plates during flux-cored CO2 automatic butt welding. In: International Conference on Metal Fabrication and Welding Technology, 2003-09-16 - 2003-09-18, Nottingham, UK.

Carus, D. (2003) Practicalities and openability of packaging. In: CCFRA Food Packaging Conference, 2003-01-01, Gloucestershire, UK.

Carus, D. and Doyle, Mike (2003) The EU package project - bringing eCommerce into the home. In: Faraday Packaging Partnership Conference, 2002-04-01, Leeds, UK.

Chen, H.F. and Engelhardt, M.J. and Ponter, A.R.S. (2003) Linear matching method for creep rupture assessment. International Journal of Pressure Vessels and Piping, 80. pp. 213-220. ISSN 0308-0161

Clarke, J. and Dolado, J. J. and Harman, M. and Hierons, R. and Jones, B. and Lumkin, M. and Mitchell, B. and Mancoridis, S. and Rees, K. and Roper, M. and Shepperd, M. (2003) Reformulating Software Engineering as a Search Problem. IEE Proceedings Software, 150 (3). pp. 161-175. ISSN 1462-5970

Earland, S. and Nash, D.H. and Garden, W. (2003) Guide to European pressure equipment: the complete reference source. Professional Engineering : Published in association with Roles & Associates, Bury St. Edmunds, UK. ISBN 1860583458

Ellery, Alex and Barnes, Dave and Buckland, Rodney and Welch, Chris and Garry, James and Zarnecki, John and Gebbie, Jonathan and Green, Ashley and Smith, Mark and Hall, David and McInnes, Colin and Winfield, Alan and Nehmzow, Ulrich and Ball, Andrew (2003) The UK space and planetary robotics network. JBIS, Journal of the British Interplanetary Society, 56 (9-10). pp. 328-337. ISSN 0007-084X

Fleming, J.S. (2003) The requirements of HFC refrigerants in a competitive environment. Proceedings of the Institute of Refrigeration, 99. ISSN 00739677

Fleming, J.S. (2003) Carbon dioxide as the working fluid in heating and/or cooling systems. Bulletin of the International Institute of Refrigeration, 83 (4). pp. 7-15. ISSN 2033-0056

Freund, S. and Kummert, M. (2003) New TRNSYS types to simulate air-to-air energy recovery. In: TRNSYS Users day and Training, 2003-03-24 - 2003-03-26, Sophia-Antipolis, France.

Galloway, A. (2003) DefStan 03-34 Issue 3 Arc Welding of Ferrous Armour. Other. Ministry of Defence.

Grant, A.D. and Fulton, J.K.M. and Hopfe, H.H. and Hopfe, W.A. (2003) A wave energy conversion module for electricity or water production. In: Proceedings of the 5th European Wave Energy Conference. IAHR.

Gray, T.G.F. and Crowther, P. and Prag, N. (2003) Structural mechanics approaches to weld integrity assessment for pressure vessel attachments. In: Pressure Equipment Technology: Theory and Practice. Wiley, London, UK, pp. 249-267. ISBN 1860584012

Hobbs, D.J.N. and Morbitzer, C. and Spires, B. and Strachan, P.A. and Webster, J. (2003) Experience of using building simulation within the design process of an architectural practice. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association.

Hobbs, D.J.N. and Morbitzer, C. and Spires, B. and Strachan, P.A. and Webster, J. (2003) The use of building simulation within an architectural practice. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institute of Building Service Engineers (CIBSE).

Ibrahim, A.G.M. and Fleming, J.S. (2003) Leakage characteristics of CO2 reciprocating compressors at off design conditions. In: Compressors and Their Systems: 2nd International Conference. IMechE conference transactions (4). Wiley, pp. 111-122. ISBN 978-1-86058-417-6

Ibrahim, A.G.M. and Fleming, J.S. (2003) Performance assessment of a trans-critical CO2 heat pump using a reciprocating compressor. In: Proceedings of the 21st International Institute of Refrigeration Congress. International Institute of Refrigeration. ISBN 2-913149-32-4

Johnstone, C. and Bronsdon, C. and Wallace, R. and Bryden, I. and Wolfram, J. and Bradshaw, A. (2003) The EPSRC Marine Energy Research Programme: The focus and methodology. In: Proceedings of the 5th European Wave Energy Conference. IAHR.

Kelly, N.J. and Clarke, J.A. and Strachan, P.A. (2003) Improvement of transport safety by simulation-based control of fog production in a chamber - Final Report for Project G6RD-CT-2000-00211. [Report]

Kelly, N.J. (2003) Small-scale energy storage in a distributed future. In: Storage of Renewable Energy Strategies and Technologies to Meet the Challenge, 2003-11-27, London.

Knight, P.T. and Banks, W.M. (2003) The assessment of complex learning outcomes. Global Journal of Engineering Education, 7 (1). pp. 39-50. ISSN 1328-3154

Leipold, M. and Fichtner, H. and Heber, B. and Groepper, P. and Lascar, S. and Dachwald, B. and Hughes, G.W. and McInnes, C.R. (2003) Heliopause explorer: a sailcraft mission to the outer boundaries of the solar system. Acta Astronautica, 59 (8-11). pp. 785-796. ISSN 0094-5765

Lubis, A. and Boyle, J.T. (2003) An assessment of the pressure reduction effect in piping elbows under plane moment loading. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Limited; John Wiley and Sons, London, UK, pp. 25-40. ISBN 1860584012

MacKenzie, P.M. (2003) Moire interferometry and crack closure. In: Handbook of Moire Measurement (Series in Optics and Optoelectronics). Taylor and Francis, pp. 110-119. ISBN 0750305223

MacKenzie, P.M. and Walker, C.A. (2003) Experimental and computational assessment of the T* fracture parameter during creep relaxation. In: Handbook of Moiré Measurement (Series in Optics and Optoelectronics). Taylor and Francis, pp. 103-109. ISBN 0750305223

Macdonald, M. and Rhodes, J. (2003) Behaviour of stainless steel columns under combined bending and axial compression loading. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12, Zakopane, Poland.

Macdonald, Martin and Rhodes, James and Taylor, G.T. (2003) Load capacity of eccentrically loaded stainless steel columns. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishisng Limited, London, UK, pp. 149-170. ISBN 1860584012

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2003) Shakedown behaviour of thick cylindrical vessels with crossholes. In: Pressure Equipment Technology. Professional Engineering Publishers, London, UK, pp. 67-86. ISBN 978-1-86058-401-5

McInnes, C.R. (2003) Gravity-turn descent from low circular orbit conditions. Journal of Guidance, Control and Dynamics, 26 (1). pp. 183-185. ISSN 0731-5090

McInnes, C.R. (2003) Inverse solar sail trajectory problem. Journal of Guidance, Control and Dynamics, 26 (2). pp. 369-371. ISSN 0731-5090

McInnes, C.R. (2003) Solar sailing: orbital mechanics and mission applications. Advances in Space Research, 31 (8). pp. 1971-1980. ISSN 0273-1177

McInnes, C.R. (2003) Azimuthal repositioning of payloads in heliocentric orbit using solar sails. Journal of Guidance, Control and Dynamics, 26 (4). pp. 662-664. ISSN 0731-5090

McInnes, C.R. (2003) Instability of fixed, low-thrust drag compensation. Journal of Guidance, Control and Dynamics, 26 (4). pp. 655-657. ISSN 0731-5090

McInnes, C.R. (2003) Non-linear dynamics of ring world systems. JBIS, Journal of the British Interplanetary Society, 56 (9-10). pp. 308-313. ISSN 0007-084X

McInnes, C.R. (2003) Orbits in a generalized two-body problem. Journal of Guidance, Control and Dynamics, 26 (5). pp. 743-749. ISSN 0731-5090

McInnes, C.R. (2003) Velocity field path-planning for single and multiple unmanned ariel vehicles. Aeronautical Journal, 107 (1073). pp. 419-426. ISSN 0001-9240

McQuade, F. and Ward, R. and Ortix, F. and McInnes, C.R. (2003) The autonomous configuration of satellite formations using generic potential functions. In: Proceedings of the 3rd International Workshop on Satellite Constellations and Formation-Flying. International Astronautical Federation.

Morbitzer, Christoph and Strachan, Paul and Simpson, Catherine (2003) Application of data mining techniques for building simulation performance prediction analysis. In: Proceedings of the 8th International Building Performance Simulation Association Conference. International Building Performance Simulation Association.

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2003) A method for determining X-ray elastic constants for the measurement of residual stress. Strain, 39 (1). pp. 3-10. ISSN 0039-2103

Muscat, M. and MacKenzie, D. and Hamilton, R. (2003) Evaluating shakedown under proportional loading by non-linear static analysis. Computers and Structures, 81 (17). pp. 1727-1737. ISSN 0045-7949

Muscat, M. and MacKenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161

Prazeres, L.M.R. and Clarke, J.A. (2003) Communicating building simulation outputs to users. In: 8th International Building Performance Simulation Association Conference, 2003-08-11 - 2003-08-14, Eindhoven.

Radice, G. and McInnes, C.R. (2003) Autonomous behavioural algorithm for space applications. Aeronautical Journal, 107 (1074). pp. 521-527. ISSN 0001-9240

Rhodes, J. (2003) On the development of simple user-friendly microcomputer programs for structural analysis: Some personal thoughts. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12, Zakopane, Poland.

Rhodes, J. (2003) Some observations on the post-buckling behaviour of thin plates and thin-walled members. Thin-Walled Structures, 41 (2-3). pp. 207-226. ISSN 0263-8231

Roy, M. and Stack, M.M. (2003) An electrochemical technique to measure wear of metals in polymers in corrosive environments. In: Tribology - Science and Application Conference, 2003-04-23 - 2003-04-27, Vienna.

Samuel, A.A.A. and Imbabi, M. and Peacock, A. and Strachan, P.A. (2003) An engineering approach to modelling of dynamic insulation using ESP-r. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institute of Building Service Engineers (CIBSE).

Spathopoulos, M.P. (2003) On a simplified untiming procedure for supervisory control of timed automata when the time increases strictly monotonically. International Journal of Control, 76 (17). pp. 1739-1748. ISSN 0020-7179

Spathopoulos, M.P. (2003) On supervisory control for timed automata using urgency - invited session. In: IEEE Conference on Methods and Models in Automation and Robotics, 2003-08-01, Miedzyzdroje, Poland.

Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. WEAR, 255 (1-6). pp. 456-465. ISSN 0043-1648

Stack, M.M. and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. WEAR, 255 (1-6). pp. 225-236. ISSN 0043-1648

Stickland, M.T. and McKay, S. and Scanlon, T.J. (2003) The development of a three-dimensional imaging system and its application in computer aided design workstations. Mechatronics, 13 (5). pp. 521-532. ISSN 0957-4158

Stickland, M.T. and Scanlon, T.J. and Craighead, I.A. and Fernandez, J. (2003) An investigation into the mechanical damping characteristics of catenary contact wires and their effect on aerodynamic galloping instability. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 217 (2). pp. 63-71. ISSN 0954-4097

Stickland, M.T. and Scanlon, T.J. and Vidinha, T. and Langlands, K.C. and Dempster, W.M. and Jaryczewski, R. (2003) The development and application of time resolved PIV at the University of Strathclyde. Experiments in Fluids, 177. pp. 199-207. ISSN 0723-4864

Strachan, P.A. (2003) Simulation in support of outdoor testing of building components. In: Proceedings of the Dynamic Analysis and Modelling Techniques for Energy in Buildings Conference. DAME-BC.

Trendafilova, I. (2003) State space modelling and representation for vibration-based damage assessment. Key Engineering Materials, 246. pp. 547-555. ISSN 1013-9826

Trendafilova, I. (2003) A state space based approach to health monitoring of vibrating structures. Materials Science Forum, 440-441. pp. 203-210. ISSN 0255-5476

Trendafilova, I. and Heylen, W. (2003) Categorisation and pattern recognition methods for damage localisation from vibration measurements. Mechanical Systems and Signal Processing, 17 (4). pp. 825-836. ISSN 0888-3270

Trendafilova, I. and Van Brussel, H.H. (2003) Condition monitoring of robot joints using statistical and nonlinear dynamics tools. Meccanica, 38 (2). pp. 283-295. ISSN 0025-6455

Trontis, A. and Spathopoulos, M.P. (2003) Hierarchical control synthesis for eventuality specifications in hybrid systems - Invited Session. In: Proceedings of the IFAC Conference on Analysis and Design of Hybrid Systems. International Federation of Automatic Control (IFAC).

Trontis, A. and Spathopoulos, M.P. (2003) Hybrid control synthesis for eventuality specifications using level set methods. International Journal of Control, 76 (16). pp. 1599-1627. ISSN 0020-7179

Trontis, A. and Spathopoulos, M.P. (2003) Supervisory target control for hybrid systems. International Journal of Control, 76 (11). pp. 1142-1158. ISSN 0020-7179

Vezza, M. and Taylor, I.J. and Donnellan, B. and Brown, C. (2003) Static and aeroelastic flow control using a discrete vortex method. In: 11th International Conference on Wind Engineering, 2003-06-02 - 2003-06-05, Lubbock, Texas.

Walker, C.A. (2003) Handbook of Moire Measurement. Optics and Optoelectronics . Taylor and Francis. ISBN 0750305223

Wood, J. (2003) Analysis and simulation tools for engineering designers. In: NAFEMS Workshop, 2003-12-01, Birmingham.

Wood, J. (2003) Examination of cross-industry best practice in the modelling of details common in fabricated plate/shell construction. In: The 5th FENET Technical Workshop, 2003-10-01, Noordwijk, The Netherlands.

Wood, J. (2003) The cardinal sins of FEA: Part I. BENCHmark, 99. p. 99. ISSN 0951-6859

Wood, J. (2003) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 4th FENET Technology Workshop, 2003-02-26, Barcelona.

Zhang, J. and Baker, T.N. (2003) Effect of equalisation time on the austenite grain size of simulated thin slab direct charged (TSDC) vanadium microalloyed steels. ISIJ International, 43 (12). pp. 2015-2022. ISSN 0915-1559

Kelly, N.J. and Beausoleil-Morrison, I. (2002) Simulation of modern heat and power systems for buildings. In: Proceedings of 6th International Conference on Systems Simulation in Buildings. SSB.

Blanco, E. and Fernandez, J. and Fernandez-Oro, J. and Scanlon, T.J. and Stickland, M.T. (2002) Estudio numerico de las condiciones de estabilidad de estructuras bidimensionales bajo carga aerodinamica. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13, Cadiz, Spain.

Blanco, E. and Fernandez-Vina, F. and Fernandez-Oro, J. and Scanlon, T.J. and Stickland, M.T. (2002) Analisis numerico de una bomba semiaxial. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13, Cadiz, Spain.

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, part III: investigation of mechanical strength. Journal of Adhesion, 78 (12). pp. 1027-1038. ISSN 0021-8464

Thomason, J.L. (2002) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP. Composites Part A: Applied Science and Manufacturing, 33 (12). pp. 1641-1652. ISSN 1359-835X

Trontis, A. and Spathopoulos, M.P. (2002) The batch evaporator: a case study of target control for hybrid systems using level set methods. In: 41st IEEE Conference on Decision and Control, 2002-12-10 - 2002-12-13, Las Vegas.

Xia, H. and Pang, Y. and Spathopoulos, M.P. (2002) Approximate analysis of supervisory target control for hybrid systems. In: 41st IEEE Conference on Decision and Control, 2002-12-10 - 2002-12-13, Las Vegas.

Nash, D.H. (2002) Differences between EN13445 and other international standards. In: Pressure Equipment in Europe Conference, 2002-11-19 - 2002-11-20, Brussels, Belgium.

Zhang, Yong Liang and Reese, Jason M. and Gorman, Daniel G. (2002) Finite element analysis of the vibratory characteristics of cylindrical shells conveying fluid. Journal of Sound and Vibration, 191 (45). pp. 5207-5231. ISSN 0022-460X

Abid, M. and Nash, D.H. and Webjorn, J. (2002) Risk assessment studies of gasketed and non-gasketed bolted pipe joints. In: Proceedings of the 4th ASME International Pipelines Conference, 2002-10-01, Calgary, Canada.

Macdonald, M. and Rhodes, J. (2002) Finite element modelling of stainless steel columns in variation in mechanical properties. In: 16th International Speciality Conference on Cold Formed Steel Structures, 2002-10-17 - 2002-10-18, Orlando, FL, USA.

Mathew, M.T. and Stack, M.M. (2002) Micro-abrasion interactions of pure metals in bio-oils. In: Third International Symposium on Fuels and Lubricants, 2002-10-07 - 2002-10-09, New Delhi, India.

Parr, A.C.S. and O'Leary, R.L. and Hayward, G. and Smillie, G. and Benny, C.G. and Ewing, H.C. and MacKintosh, A.R. (2002) Investigating the thermal stability of 1-3 piezoelectric composite transducers by varying the thermal conductivity and glass transition temperature of the polymeric filler material. In: 2002 IEEE Ultrasonics symposium proceedings. Ultrasonics Symposium . IEEE, New York, pp. 1173-1176. ISBN 0780375823

Rhodes, J. (2002) Post-buckling analysis of light-gauge members using finite strips. In: 16th International Speciality Conference on Cold-Formed Steel Structures, 2002-10-17 - 2002-10-18, Orlando, FL, USA.

Xia, H. and Trontis, A. and Pang, Y. and Spathopoulos, M.P. (2002) Supervisory eventuality synthesis. In: 6th International Workshop on Discrete Event Systems (WODES 02), 2002-10-02 - 2002-10-04, Zaragoza.

Kelly, N.J. and Beausoleil-Morrison, I. (2002) Modelling and simulation of small-scale embedded generation systems. In: eSim2002, The Canadian Building Simulation Conference. European School for Industrial Mathematics (ESIM), pp. 153-160.

Armstrong, G.S. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2002) Monitoring the solvent uptake in adhesive bonded joints using a novel non-destructive technique by applying high frequency dielectrics. In: Adhesive joints. VSP International Science Publishers. ISBN 9789067643719

Madhlopa, A. and Jones, S.A. and Saka, J.D.K. (2002) A solar air heater with composite-absorber systems for food dehydration. Renewable Energy, 27 (1). pp. 27-37. ISSN 0960-1481

Nash, D.H. (2002) Co-ordination and dissemination of European pressure equipment research. In: Opportunities in research and development for the pressure equipment industry, 2002-01-01, London, UK.

Stack, M.M. and Mathew, M.T. (2002) Micro-abrasion mapping of steels: some thoughts on the construction of micro-abrasion maps. In: International Conference on Materials and Tribology, 2002-09-12 - 2002-09-13, Dublin, Ireland.

Doherty, N. and Scanlon, T.J. and Stickland, M.T. and Waddell, P. (2002) An experimental and numerical analysis of flow in a ShockWave power generator. In: 10th International Symposium on Flow Visualisation, 2002-08-26 - 2002-08-29, Kyoto, Japan.

Bartak, M. and Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Melikov, A. and Popiolek, Z. and Stankov, P. (2002) Integrating CFD and building simulation. Building and Environment, 37 (8-9). pp. 865-871. ISSN 0360-1323

Citherlet, S. and Hand, Jon (2002) Assessing energy, lighting, room acoustics, occupant comfort and environmental impacts performance of building with a single simulation program. Building and Environment, 37 (8-9). pp. 845-856. ISSN 0360-1323

Grant, Andrew and Dannecker, R.K.W. and Nicholson, C.D. (2002) Development of building-integrated wind turbines. In: World Wind Energy Conference, 2002-07-02 - 2002-07-06, Berlin, Germany.

Banks, W.M. (2002) How much resource should be invested in training less qualified school leavers and less experienced engineers? In: Sharing Best Practice on Overcoming the Engineering Skills Shortage (The Engineer Conferences), 2002-07-01, Birmingham, UK.

Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E. (2002) Manufacturing considerations in the support of large GRP storage vessels. In: Sixth International Conference on Flow Process in Composite Materials (FPCM-6), 2002-07-15 - 2002-07-17, Auckland, New Zealand.

Osman, M. and Engler, O. and Karhausen, K. and McLaren, A.J. (2002) The influence of homogenisation heat treatment on microstructure development in Al-Mg-Mn alloy AA5454. In: 8th International Conference on Aluminium Alloys, 2002-07-02 - 2002-07-05, Cambridge, UK.

Reddy, D.N. and Scanlon, T.J. and Kuo, C. (2002) Prediction of slam loads on a wedge section using computational fluid dynamics (CFD) techniques. In: Twenty-fourth Symposium on Naval Hydrodynamics, 2002-07-08 - 2002-07-13, Fukuoka, Japan.

Trontis, A. and Xia, H. and Pang, Y. and Spathopoulos, M.P. (2002) Target control for hybrid systems. In: 15th IFAC World Congress on Automatic Control, 2002-07-21 - 2002-07-26, Barcelona, Spain.

Dempster, W.M. and Wheel, M. (2002) Engineering analysis: a pre-requisite for design. In: 2002 ASEE Annual Conference and Exposition, 2002-06-16 - 2002-06-19, Montréal, Quebec, Canada.

Hamilton, R. and Boyle, J.T. (2002) Simplified lower bound limit analysis of transversely loaded thin plates using generalised yield criteria. Thin-Walled Structures, 40 (6). pp. 503-522. ISSN 0263-8231

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2002) Modal analysis of a lightweight structure - investigation of the effects of the supports on the structural dynamics. Mechanical Systems and Signal Processing, 16 (2-3). pp. 273-284. ISSN 0888-3270

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2002) Use of static stress for modification of welding residual stress. Science and Technology of Welding and Joining, 7 (1). pp. 51-55. ISSN 1362-1718

Osman, M. and McLaren, A.J. (2002) The influence of homogenisation practice on the recrystallisation kinetics of Al-Mg-Mn alloy AA5454. In: Proceedings of Thermomechanical Processing: Mechanics, Microstructure and Control Conference, 2002-06-01, Sheffield, UK.

Wheel, M. and Dempster, W.M. (2002) Teaching engineering analysis within an interactive studio teaching environment. In: 3rd Global Congress on Engineering Education, 2002-06-30 - 2002-07-05, Glasgow.

Xia, H. and Pang, Y. and Spathopoulos, M.P. (2002) Eventuality synthesis for controlled linear automata. In: 20th Annual American Control Conference (ACC), 2002-05-08 - 2002-05-10, Anchorage.

Carus, D. (2002) PACKAGE - Provision for improved lifestyles via Access to Consumer pacKAGEs. In: Proceedings of the International Conference on Assistive Technology, ICAT 2002, The British Computer Society Disability Group, 2002-04-24 - 2002-04-25, Derby, England.

Trendafilova, I. (2002) Non-linear dynamics characteristics for damage detection. In: Third International Conference on Identification in Engineering Systems, 2002-04-15 - 2002-04-17, Swansea, UK.

Zhang, Yong Liang and Reese, Jason M. and Gorman, Daniel G. (2002) A comparative study of axisymmetric finite elements for the vibration of thin cylindrical shells conveying fluid. International Journal for Numerical Methods in Engineering, 54 (1). pp. 89-110. ISSN 0029-5981

Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. (2002) Assessment of water ingress in adhesively bonded composite structures using dielectric spectroscopy. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2002) Experience with classroom feedback systems to enable Socratic dialogue in large engineering classes. In: 2nd Annual Symposium on Engineering Education, 2002-01-01, London, UK.

Zhang, Y.L. and Reese, J.M. and Gorman, D.G. (2002) Initially tensioned orthotropic cylindrical shells conveying fluid: a vibration analysis. Journal of Fluids and Structures, 16 (1). pp. 53-70. ISSN 0889-9746

Alexander, D. and McInnes, C.R. and Angelopoulos, V. and Sandeman, A.W. and Macdonald, M. (2002) Geosail: A novel solar sail mission concept for geospace. In: Proceeding of the AIP Space Technology and Appications International Forum/Staif 2002, Innovative Transportation Systems and Beyond. American Institute of Physics, pp. 305-312. ISBN 1-56396-980-7

Alexander, D. and Sandman, A.W. and McInnes, C.R. and Macdonald, M. and Ayton, J. and Murphy, N. and Angelopoulos, V. (2002) GeoSail: a novel magnetospheric space mission utilizing solar sails. In: 53rd International Astronautical Congress, 2002-10-10 - 2002-10-19, Houston, Texas.

Banks, W.M. (2002) Profession misrepresented. Professional Engineering, 15 (6). p. 19. ISSN 0953-6639

Banks, W.M. and Hayward, D. and Pethrick, R.A. and Armstrong, G.S. and Crane, R.L. (2002) Developments in dielectric techniques for non-destructive examination. In: Proceedings of the 25th Annual Meeting of The Adhesion Society. Adhesion Society, Florida, USA. ISBN 1086-9506

Blanco, E. and Fernandez, J. and Scanlon, T.J. and Stickland, M.T. (2002) A numerical analysis of a mixed flow pump. In: Proceedings of the ASME Joint US-European Fluids Engineering. ASME, pp. 791-798. ISBN 0791836150

Blanco, E. and Fernandez, J. and Fernandez-Oro, J. and Scanlon, T.J. and Stickland, M.T. (2002) Diseno de una bomba centrifuga: analisis numerico y experimental. In: 15th Spanish Association of Mechanical Engineering National Conference, 2002-12-10 - 2002-12-13, Cadiz, Spain.

Blanco, E. and Fernandez-Francos, J. and Scanlon, T.J. and Parrondo, J. and Stickland, M.T. (2002) A numerical and experimental analysis of flow in a centrifugal pump. In: Proceedings of the ASME Joint US-European Fluids Engineering Conference. ASME, pp. 703-708. ISBN 0791836150

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Dielectric spectroscopy technique to assess the durability of adhesively bonded composite joint structures. In: Durability analysis of composite systems 2001: proceedings of the Fifth International Conference on Durability Analysis of Composite Systems. Taylor & Francis, London, UK, pp. 101-108. ISBN 9058093824

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part I: Water permeation in epoxy adhesive. Journal of Adhesion, 78 (12). pp. 1001-1014. ISSN 0021-8464

Boinard, P. and Banks, W.M. and Pethrick, R.A. (2002) Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part II: Dielectric study. Journal of Adhesion, 78 (12). pp. 1015-1026. ISSN 0021-8464

Cichocki, F.R. and Thomason, J.L. (2002) Thermoelastic anisotropy of a natural fiber. Composites Science and Technology, 62 (5). pp. 669-678. ISSN 0266-3538

Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, P.A. (2002) Simulation-assisted control in building energy management systems. Energy and Buildings, 34 (9). pp. 933-940. ISSN 0378-7788

Clarke, J.A. (2002) Performance prediction tools for low impact building design. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, Sint-Stevens-Woluwe.

Clarke, J.A. and Johnstone, C. and Kim, J.M. and Strachan, P.A. (2002) On-line energy services for smart homes. In: Proceedings of EPIC 02 Conference. Air Infiltration and Ventilation Centre, Sint-Stevens-Woluwe.

Clarke, J.A. and Macdonald, Iain and Stankov, P. and Denev, J. and Melikov, A. (2002) Local comfort and air quality quantification via integrated building simulation. In: Proceedings of Roomvent 2002 - 8th International conference on air distribution in rooms. IOP, pp. 401-404. ISBN 87-989117-0-8

Crichton, B.H. and Fouracre, R.A. and Gouda, H.A. and Stickland, M.T. (2002) Sessile water droplets on insulating surfaces subject to high AC stress effect of contact angle. In: Proceedings of the Universities' on Power Engineering Conference, UPEC 2002. IEEE. ISBN 1-904133-07-X

Dannecker, R.K.W. and Grant, A.D. (2002) Investigations of a building-integrated ducted wind turbine module. Wind Energy, 5 (1). pp. 53-71. ISSN 1095-4244

Dempster, W.M. and Lee, C.K. and Boyle, J.T. (2002) Teaching of thermodynamics and fluid mechanics using interactive learning methods in large classes. In: ASEE Annual Conference and Exposition: Vive L'ingenieur, 2002-06-16 - 2002-06-19, Montreal, Canada.

Doyle, G.T. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2002) Dielectric non-destructive examination of ageing of adhesively bonded structures. In: UNSPECIFIED.

Fernandez, J. and Parrondo, J. and Scanlon, T.J. and Stickland, M.T. (2002) A numerical and experimental flow analysis in a centrifugal pump with impeller-volute interaction. In: Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 0-08-044114-9

Fernandez, J. and Parrondo, J. and Scanlon, T.J. and Stickland, M.T. (2002) A numerical flow simulation of a mixed flow pump. In: Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 0-08-044114-9

Gallego-Meana, J.M. and Craighead, I.A. and Casey, J. (2002) Transmission of noise and vibration in canopied diesel driven power generating sets. In: Proceedings of ISMA 2002 International Conference on Noise and Vibration Engineering. ISMA, pp. 1771-1780.

Giua, A. and Smedinga, R. and Spathopoulos, M.P. and van Schuppen, J.H. (2002) Editorial introduction. Discrete Event Dynamic Systems, 12 (1). p. 5. ISSN 0924-6703

Hand, J. and McElroy, L.B. (2002) Simulation, no problem, of course we offer this service! (observations on firms who have worked to make this true). In: Proceedings of eSim2002, The Canadian Building Simulation Conference. IBPSA.

Hughes, G.W. and McInnes, C.R. (2002) Mercury sample return missions using solar sail propulsion. In: Proceedings of the 53rd Astronautical Federation Congress. AIAA.

Hughes, G.W. and McInnes, C.R. (2002) Solar sail hybrid trajectory optimization for non-Keplerian orbit transfers. Journal of Guidance, Control and Dynamics, 25 (3). pp. 602-604. ISSN 0731-5090

Jiang, J. and Stack, M.M. and Neville, A. (2002) Modelling the tribo-corrosion interaction in aqueous sliding conditions. Tribology International, 35 (10). pp. 669-679. ISSN 0301-679X

Jing, W.J. and McInnes, C.R. (2002) Memorised quasi-time fuel-optimal feedback control of perturbed double integrator. Automatica, 38 (8). pp. 1389-1396. ISSN 0005-1098

Li, L. and Yang, X. and Wood, J. (2002) A comparison of two numerical modelling approaches for the simulation of particle dispersion in a turbulent mixing layer. In: Proceedings of the 15th International Congress of Congress of Chemical and Process Engineering, 2002-08-25 - 2002-08-29, Prague, Czech Republic.

Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2002) Evolution of precipitation in direct charged thin slab cast VoN and V-Ti-N steels. In: Proceedings of the Institute of Physics Conference: Electron Microscopy and Analysis Group Conference. Institute of Physics Conference series, 168 (11). Institute of Physics, Bristol, United Kingdom. ISBN 0750308125

Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2002) The evolution of microstructure during thin slab direct rolling processing in vanadium microalloyed steel. ISIJ International, 42 (6). pp. 636-644. ISSN 0915-1559

Macdonald, M. and McInnes, C.R. (2002) Seasonal efficiencies of solar sailing in planetary orbit. In: Proceedings of 34th COSPAR Scientific Assembly, The Second World Space Congress. SAO/NASA Astrophysics Data System.

Macdonald, M. and McInnes, C.R. (2002) Solar sail capture trajectories at Mercury. In: Proceedings of the AIAA/AAS Astrodynamics Specialist Conference and Exhibit. AIAA.

McIlwain, S.R. and Kenbar, A.M.R. and Lee, C.K. (2002) The influence of Corbel shape on bundle pressure drop of a crossflow heat exchanger. In: Proceedings of HTFS Research Symposium, 1900-01-01.

McInnes, C.R. (2002) Astronautical engineering revisited: planetary orbit modification using solar radiation pressure. Astrophysics and Space Science, 282 (4). pp. 765-772. ISSN 0004-640X

McInnes, C.R. (2002) Minimum mass solar shield for terrestrial climate control. JBIS, Journal of the British Interplanetary Society, 55 (9-10). pp. 307-311. ISSN 0007-084X

McInnes, C.R. (2002) Non-Keplerian orbits for Mars solar reflectors. JBIS, Journal of the British Interplanetary Society, 55 (3-4). pp. 74-84. ISSN 0007-084X

McInnes, C.R. (2002) Summary of RAS specialist discussion meeting on solar sail mission applications. Bulletin of the Special Astrophysical Observatory - North Caucasus, 122 (1170). pp. 252-254. ISSN 0320-9318

McInnes, C.R. (2002) The light cage limit to interstellar expansion. JBIS, Journal of the British Interplanetary Society, 55 (7-8). pp. 279-284. ISSN 0007-084X

McInnes, C.R. and Hughes, G.W. and Macdonald, M. (2002) Payload mass fraction optimization for solar cargo missions. Journal of Spacecraft and Rockets, 39 (6). pp. 933-935. ISSN 0022-4650

Muscat, M. and Hamilton, R. (2002) Elastic shakedown in pressure vessel components under non-proportional loading. ASME Publications PVP, 447. pp. 95-102. ISSN 0277-027X

Muscat, M. and Hamilton, R. and Boyle, J.T. (2002) Shakedown analysis for complex loading using superposition. Journal of Strain Analysis for Engineering Design, 37 (5). pp. 399-412. ISSN 0309-3247

Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E. (2002) A parametric study of alternative support systems for cylindrical GRP storage vessels. In: Proceedings of the Third Australasian Conference on Composite Materials ( ACCM-3). ASTM International, Auckland, New Zealand.

Osman, M. and Engler, O. and Karhausen, K. and McLaren, A.J. (2002) The influence of homogenisation heat treatment on microstructure development in Al-Mg-Mn alloy AA5454. Materials Science Forum, 396-402 (1). pp. 351-356. ISSN 0255-5476

Pan, W. and Wheel, M. (2002) Including rotational degrees of freedom within a structural finite volume procedure. In: 10th UK Conference of the Association of Computational Mechanics in Engineering (ACME), 2002-04-14 - 2002-04-17, Swansea, UK. (Unpublished)

Ponter, Alan R.S. and Chen, Haofeng (2002) Linear matching methods for shakedown analysis. In: New Approaches to Structural Mechanics, Shells and Biological Structures. Solid Mechanics and Its Applications, 104 . Kluwer Academic Publishers, pp. 203-213.

Reese, J.M. and Lockerby, D.A. (2002) A new design capability for hypersonic flight vehicles and microscale devices? In: Computer-based design: Engineering Design Conference 2002. Wiley, pp. 767-775. ISBN 1860583725

Rhodes, J. (2002) Buckling of thin plates and members - and early work on rectangular tubes. Thin-Walled Structures, 40 (2). pp. 87-108. ISSN 0263-8231

Rhodes, J. and Shanmugam, N.E. (2002) Cienkoscienne profile zimno formowane we wspolczesnej technice (thin-walled cold-formed profiles in modern technology). In: Plyty I powloki w przyrodzie, mechanice I biomechanica (Plates and Shells in Nature, Mechanics and Biomechanics). Wydawnictwa Naukowo-Techniczne.

Rhodes, J. and Shanmugam, N.E. (2002) Cold formed steel structures. In: The civil engineering handbook. New directions in civil engineering . CRC Press, Boca Raton, USA; London, UK. ISBN 0849309581

Sing, W. and Baker, T.N. (2002) Dry sliding wear behaviour of AA2014 alloy and AA2618 aluminium based composites. In: Proceedings of 1st International Conference on Materials Processing for Properties and Performance. UNSPECIFIED.

Stack, M.M. (2002) Editorial to: Special issue: Tribo-Erosion. Tribology International, 35 (10). pp. 615-616. ISSN 0301-679X

Stack, M.M. (2002) Mapping tribo-corrosion processes in dry and aqueous conditions: some new directions for the new Millennium. Tribology International, 35 (10). pp. 681-689. ISSN 0301-679X

Stack, M.M. and Chi, K. (2002) Effect of preferential dissolution on erosion-corrosion for chromium steel in alkali slurry. Transactions of the Non-Ferrous Metal Society of China, 12 (5). pp. 931-935. ISSN 1003-6326

Stack, M.M. and Pungwiwat, N. (2002) Particulate erosion of Al in aqueous conditions: some perspectives on pH effects on the erosion-corrosion map. Tribology International, 35 (10). pp. 651-660. ISSN 0301-679X

Stickland, M.T. and Waddell, P. and Mason, S. and McKay, S. and Mair, L. (2002) Fluid flow analysis by a modified, white light, Lau interferometer. Experiments in Fluids. ISSN 0723-4864

Taylor, I. and Vezza, M. (2002) Aeroelastic stability analysis of a bridge deck with added vanes using a discrete vortex method. Wind and Structures, 5 (2). pp. 277-290. ISSN 1226-6116

Taylor, I.J. and Vezza, M. (2002) Calculation of lateral flutter derivatives using a discrete vortex method. In: Proceedings of the 5th UK Conference on Wind Engineering. Anemos Associates, pp. 83-86. ISBN 1902996038

Taylor, I.J. and Vezza, M. (2002) Commercial computational wind engineering: contributions of DIVEX to recent design projects. In: Proceedings of the 5th UK Conference on Wind Engineering. Anemos Associates, pp. 91-94. ISBN 1902996038

Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass-reinforced polybutyleneterepthalate. Composites Part A: Applied Science and Manufacturing, 33 (3). pp. 331-339. ISSN 1359-835X

Thomason, J.L. and Adzima, L.J. (2002) Sizing up the interphase: An insider's guide to the science of sizing. Composites Part A: Applied Science and Manufacturing, 32 (3-4). pp. 313-321. ISSN 1359-835X

Thomason, J.L. and Cichocki, F.R. (2002) Thermal anisotropy of a natural fibre. In: Proceedings of the Gordon Conference on Composites. Blackwell.

Thomason, J.L. (2002) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? Composites Part A: Applied Science and Manufacturing, 33 (10). pp. 1283-1288. ISSN 1359-835X

Thomason, J.L. (2002) Micromechanical parameters from macromechanical measurements on glass reinforced polypropylene. Composites Science and Technology, 62 (10-11). pp. 1455-1468. ISSN 0266-3538

Trendafilova, I. (2002) Vibration-based damage assessment using state-space representation of structural response. In: Proceedings of the 1st European Workshop on Structural Health Monitoring. Destech Publications. ISBN 978-1-932078-08-4

Trontis, A. and Xia, H. and Spathopoulos, M.P. (2002) Supervisory target control for hybrid systems. In: 15th IFAC World Congress 2002, 2002-07-21 - 2002-07-26, Spain.

Walker, C.A. and Blair, R. (2002) Leg stiffness and damping factors as a function of running speed. Sports Engineering, 5 (3). pp. 129-140. ISSN 1369-7072

Walker, C.A. and Gray, T.G.F. (2002) An evaluation of the test regimes for stab-resistant body armour. In: Designing Equipment for Body Protection Seminar, 2002-10-01, London, UK.

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2002) Nanoanalysis of dispersion strengthening particles in thin slab cast vanadium microalloyed steels. In: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group (EMAG 2001 Conference). EMAG Conference Series, 168 . Institute of Physics, London, United Kingdom, pp. 187-190. ISBN 0-7503-0812-5

Wood, J. (2002) Preliminary observations on the FENET industry needs survey and some recommendations. In: 2nd FENET Annual Industry Meeting, 2002-12-01, Prague, Czech Republic.

Wood, J. (2002) Some thoughts on relevant educational and professional development issues for users of finite element systems. In: The 3rd FENET Technology Workshop, 2002-09-01, Trieste, Italy.

Wood, J. (2002) A proposed user survey and possible approaches to reducing barriers to the effective use of FEA in industry. In: 2nd FENET Technology Workshop, 2002-06-13, Zurich.

Wood, J. and Thomson, J. (2002) Web-based learning material for engineering analysis. In: NAFEMS/FENET Awareness Seminar on Web-based Training for Engineering Analysis, 2002-06-13 - 2002-06-14, Zurich, Switzerland. (Unpublished)

Wood, J. (2002) Barriers to the effective use of finite element analysis in industry. In: FENET Workshop, 2002-02-27 - 2002-02-28, Copenhagen.

Yan, Y. and Fleming, J.S. (2002) The development of calculation techniques for HFC blend-oil behaviour. In: Proceedings of the 9th International Refrigeration and Air Conditioning Conference. Purdue University Printing Services.

Zhang, Y.L. and Reese, J.M. and Gorman, Daniel G. and Madhok, R. (2002) The vibration of an artery-like tube conveying pulsatile fluid flow. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 216 (1). pp. 1-11. ISSN 0954-4119

Kennedy, A.R. and Smith, W.E. and Tackley, D.R. and David, W.I.F. and Shankland, K. and Brown, B. and Teat, S.J. (2001) Tetraaryl biphenyl diamine hole transport materials: a structural study utilizing both single crystal and high resolution powder diffraction. Journal of Materials Chemistry, 12. pp. 168-172. ISSN 0959-9428

Scanlon, T.J. and Stickland, M.T. (2001) An investigation into the aerodynamic characteristics of catenary contact wires in a cross-wind. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 215 (4). pp. 311-318. ISSN 0954-4097

Boyle, J.T. (2001) The design by analysis manual, European Commission, EUR-19030EN, 1,200 pages. Guide or manual. European Commission, Glasgow, UK.

Trontis, A. and Spathopoulos, M.P. (2001) Target control for hybrid systems with linear continuous dynamics. In: Proceedings of the 40th IEEE Conference on Decision and Control. IEEE, pp. 1229-1234. ISBN 0-7803-7061-9

Yew, C.K. and Boyle, J.T. and MacKenzie, D. (2001) A computer algebra based finite element development environment. Advances in Engineering Software, 32 (12). pp. 913-925. ISSN 0965-9978

Adzima, L.J. (2001) Moldable pellet based on a combination of natural fibers and thermoplastic polymer. World Intellectual Property Organization Patent - WO/2001/083598.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. (2001) Approaches to teaching and learning in engineering education (NATALIE) project. In: International Colloquium: Global Changes in Engineering Education, Proceedings of Ed-Media 2001 World Conference on Education Multi Media, 2001-10-01, Berlin, Germany.

Galbraith, G.H. and Li, J. and McLean, R.C. and Baker, P.H. (2001) The influence of space discretization on the accuracy of numerical simulation of heat and moisture transport in porous building materials. Journal of Thermal Envelope and Building Science, 25 (2). pp. 143-160. ISSN 1097-1963

Carus, D. (2001) European research themes. In: European Conference on Computational Mechanics and Engineering Practice, 2001-09-19 - 2001-09-21, Szczyrk, Poland.

Langlands, K.C. and Scanlon, T.J. and Stickland, M.T. (2001) An experimental and numerical analysis of flow near a pump intake using particle image velocimetry and computational fluid dynamics. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14, Limerick, Ireland.

Quinonez-Varela, G. and Cruden, A.J. and Grant, A.D. and Castaneda, A. (2001) Electrical integration assessment of wind turbines into industrial power systems : the case of a mining unit. In: PPT 2001IEEE Porto Power Tech Conference, 2001-09-10 - 2001-09-13, Porto.

Craighead, I.A. and Thackery, S. and Redstall, M. and Thomas, M.R. (2001) Monitoring wood decay in poles by the vibroacoustic method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (8). pp. 905-917. ISSN 0954-4062

McElroy, L.B. and Clarke, J.A. and Hand, Jon (2001) Delivering simulation to the design profession: the next stage? In: Proceedings of the 7th International Building Performance Simulation Association Conference, 2001-08-13 - 2001-08-15, Rio de Janeiro, Brazil.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2001) The use of classroom feedback systems to enable active learning in large engineering mechanics classes. In: International Conference on Engineering Education, 2001-08-06 - 2001-08-10, Oslo, Norway.

Lamb, Wilson and Murdoch, Ian and Stewart, John (2001) On an operator identity central to projection operator methodology. Physica A: Statistical Mechanics and its Applications, 298 (1). pp. 121-139. ISSN 0378-4371

Zhang, Y.L. and Gorman, Daniel G. and Reese, J.M. (2001) A finite element method for modelling the vibration of initially tensioned thin-walled orthotropic cylindrical tubes conveying fluids. Journal of Sound and Vibration, 245 (1). pp. 93-112. ISSN 0022-460X

Born, F. and Clarke, J.A. and Johnstone, C. (2001) Development and demonstration of a renewable energy based demand/supply decision support tool for the building design profession. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA, pp. 245-250. ISBN 85-901939-3-4

Shih, J. and Banks, W.M. (2001) A study of the effects of manufacturing variables and solvents on the mechanical properties of carbon fibre composites. In: Design, Manufacturing and Application of Composites. Technomic Publishing Company, Lancaster, Pennsylvania, pp. 183-190. ISBN 9781587161148

Taylor, I.J. and Vezza, M. (2001) Application of a discrete vortex method for the analysis of suspension bridge deck sections. Wind and Structures, 4 (4). pp. 333-352. ISSN 1226-6116

McInnes, C.R. and Macdonald, M. and Angelopoulos, V. and Alexander, D. (2001) GeoSail: exploring the geomagnetic tail using a small solar sail. Journal of Spacecraft and Rockets, 38 (4). pp. 622-629. ISSN 0022-4650

Muscat, M. and MacKenzie, D. (2001) Shakedown analysis of axi-symmetric nozzles. In: Proceedings of the ASME Pressure Vessels and Piping Conference, 2001-07-22 - 2001-07-26, San Diego, USA.

Vargas, José V.C. and Fleming, J.S. and Parise, José A.R. (2001) Maximum exergy input rate from a hot stream in solar driven refrigerants. International Journal of Energy Research, 25 (9). pp. 751-767. ISSN 0363-907X

Kelly, N.J. and Strachan, P.A. (2001) Multi-domain modelling using the ESP-r system. In: Proceedings of eSIM 2001 Conference on Building Energy Simulation, 2001-06-13 - 2001-06-14, Ottawa, Canada.

Abo-Elnor, M. and Boyle, J.T. and Hamilton, R. (2001) Soil-tool interface experimental evaluation and constitutive models. In: 18th Canadian Congress of Applied Mechanics, Newfoundland., 2001-06-03 - 2001-06-07, St. John's, Newfoundland, Canada.

Born, F. and Clarke, J.A. and Johnstone, C. and Smith, N.A. (2001) Merit - An evaluation tool for 100% renewable energy provision. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16, Chania, Crete, Greece.

Boyle, J.T. (2001) Accurate approximate estimates of limit and shakedown loads using elastic finite element analysis. In: 18th Canadian Congress of Applied Mechanics (CANCAM 2001, 2001-06-03 - 2001-06-07, St John's, Canada.

Galbraith, G.H. and Kelly, D. and McLean, R.C. (2001) Techniques for measuring moisture retention properties. In: Proceedings of the 3rd International Conference on Building Envelope Systems and Technologies, ICBEST 2001, 2001-06-26 - 2001-06-29, Ottawa, Canada.

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) Modification of welding stresses by flexural vibration during welding. Science and Technology of Welding and Joining, 6 (3). pp. 133-138. ISSN 1362-1718

Selamat, M.S. and Baker, T.N. and Watson, L.M. (2001) Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment. Journal of Materials Processing Technology, 113 (1-3). pp. 509-515. ISSN 0924-0136

Strachan, P.A. (2001) Overview of building simulation in Europe. In: Conference on Building Energy Simulation, 2001-06-13 - 2001-06-14, Ottawa.

Tamiaki, M. and Nash, D.H. and Tooth, A.S. (2001) The finite element modelling of horizontal vessels used for storing hot fluids. In: Proceedings of the 4th International Congress on Thermal Stresses, 2001-06-08 - 2001-06-11, Osaka, Japan.

Banks, W.M. and Nash, D.H. and Tooth, A.S. and Flaherty, A.E. (2001) Design optimisation studies on composite pressure vessels and piping to ensure long term structural integrity. In: Structural Integrity of Composite Materials and Structures: Optimisation of Micro-structural Design, 2001-05-20 - 2001-05-25, Capri, Italy.

Citherlet, S. and Clarke, J.A. and Hand, Jon (2001) Integration in building physics simulation. Energy and Buildings, 33 (5). pp. 451-461. ISSN 0378-7788

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) Modification of residual stress by post-weld vibration. Materials Science and Technology, 17 (5). pp. 601-605. ISSN 0267-0836

Paton, G. and Casey, N.F. and Fairbairn, J. and Banks, W.M. (2001) Advances in the fatigue assessment of wire ropes. Ocean Engineering, 28 (5). pp. 491-518. ISSN 0029-8018

Clarke, J.A. (2001) Domain integration in building simulation. Energy and Buildings, 33 (4). pp. 303-308. ISSN 0378-7788

Clarke, J.A. (2001) Integrated building performance simulation. In: Proceedings of the 4th International Indoor Air Quality Ventilation and Energy Conservation in Buildings Conference (IAQVEC 2001). City University Hong Kong, Hong Kong, pp. 1395-1404. ISBN 9624421900

Clarke, J.A. and Kelly, N.J. (2001) Integrating power flow modelling with building simulation. Energy and Buildings, 33 (4). pp. 333-340. ISSN 0378-7788

Stack, M.M. (2001) Progress in the development of wear and erosion-corrosion mapping: state-of-the-art in Europe. In: Design Issues on Tribo-corrosion, 2001-04-01, Canada.

Boinard, P. and Pethrick, R.A. and Banks, W.M. and Crane, R.L. (2001) Novel non-destructive technique to assess the degradation of adhesively bonded composite structures. Insight: The Journal of the British Institute of Non-Destructive Testing, 43 (3). pp. 159-162. ISSN 1354-2575

Thomason, J.L. (2001) Structure-processing-performance relationships of thermoplastic composites for automotive applications. In: SAE World Congress 2001, 2001-03-05 - 2001-03-08, Detroit, USA.

Lee, C.K. and Abdel-Moneim, S.A. (2001) Computational analysis of heat transfer in turbulent flow past a horizontal surface with two-dimensional ribs. International Communications in Heat and Mass Transfer, 28 (2). pp. 161-170. ISSN 0735-1933

Macdonald, Iain and Strachan, Paul A. (2001) Practical application of uncertainty analysis. Energy and Buildings, 33 (3). pp. 219-227. ISSN 0378-7788

Zhang, Y.L. and Gorman, D. and Reese, J.M. (2001) A modal and damping analysis of viscoelastic Timoshenko tubes conveying fluid. International Journal for Numerical Methods in Engineering, 50 (2). pp. 419-433. ISSN 0029-5981

Thomason, J.L. and Kalinka, G. (2001) A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths. Composites Part A: Applied Science and Manufacturing, 32 (1). pp. 85-90. ISSN 1359-835X

Vogt, U. and Vital, A. and Graule, T. and Graehlert, W. and Leparoux, M. and Hopfe, V. and Ewing, H.C. and Daum, R. and Beil, A. (2001) CVD process for Si-N-O fibre growth controlled by in-situ FTIR spectroscopic monitoring. In: Proceedings of Ceramic Engineering and Science Conference, 2001-01-01, Braunschweig, Germany.

Armstrong, B. and Beveridge, J.R. and Born, F. and Bronsdon, C. and Clarke, J.A. and Johnstone, C. and Macrae, I.M. and McDonald, J.R. (2001) Strategy and technology deployment for achieving 100% renewable energy supply for the island of Islay. In: Renewable Energies for Islands Conference, 2001-06-14 - 2001-06-16, Chania, Crete.

Baker, T.N. (2001) Quantitative metallography using transmission electron microscopy. In: 5th International Conference on Quantitive Microscopy of High Temperature Materials 2001. Maney Publishing, pp. 161-189. ISBN 1861251092

Bartak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Stankov, P. (2001) Experimental and numerical investigation of thermal comfort in room with displacement ventilation. In: CLIMA '01 Conference, 2001-12-01, Paphos.

Bartak, M. and Cermak, M. and Clarke, J.A. and Denev, J. and Drkal, F. and Lain, M. and Macdonald, I. and Majer, M. and Stankov, P. (2001) Experimental and numerical study of local mean age of air. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 85-901939-3-4

Bates, J.R. and Blieske, U. and Bloem, J.J. and Campbell, J. and Ferrazza, F. and Hacker, R.J. and Strachan, P.A. and Tripanagnostopoulos, Y. (2001) Building implementation of photovoltaics with active control of temperature. In: Building IMPACT - final result, Proceedings of the 17th Photovoltaic Solar Energy Conference and Exhibition, Munich, October 2001. WIP. ISBN 3-936388-19-1

Beausoleil-Morrison, I. and Clarke, J.A. and Denev, J. and Macdonald, I. and Melikov, A. and Stankov, P. (2001) Further developments in the conflation of CFD and building simulation. In: Proceedings of the 7th International Building Performance Simulation Association Conference. IBPSA. ISBN 85-901939-3-4

Boinard, P. and Banks, W.M. and Pethrick, R.A. and Crane, R.L. (2001) Assessment of water permeation in adhesively bonded composite structures by dielectric spectroscopy. In: International Conference on Materials Science and Engineering, 2001-04-01, Brasov, Romania.

Born, F.J. and Clarke, J.A. and Johnstone, C.M. and Kelly, N.J. and Burt, G. and Dysko, A. and McDonald, J. and Hunter, I.B.B. (2001) On the integration of renewable energy systems within the built environment. Building Services Engineering Research and Technology, 22 (1). pp. 3-13. ISSN 1477-0849

Carey, J.J. and Zawadzka, J. and Jaroszynski, D.A. and Wynne, K. (2001) Thz-pulse studies of superluminal propagation in frustrated total internal reflection. In: Ultrafast Phenomena. OSA Trends in Optics and Photonics . Optical Society of America, pp. 238-240.

Chen, H. and Ponter, Alan R.S. (2001) Shakedown and limit analyses for 3-D structures using the linear matching method. International Journal of Pressure Vessels and Piping, 78. pp. 443-451. ISSN 0308-0161

Chen, H.F. and Ponter, A.R.S. (2001) A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 20 (4). pp. 555-571. ISSN 0997-7538

Chen, Haofeng and Shu, D.W. (2001) Simplified limit analysis of pipelines with multi-defects. Engineering Structures, 23 (2). pp. 207-213. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (2001) The load carrying capacity of the pressure vessel with two defects along axial direction. Key Engineering Materials, 177-180. pp. 757-762. ISSN 1013-9826

Clarke, J.A. (2001) Energy simulation in building design. Butterworth-Heinemann, Oxford, UK. ISBN 0750650826

Clarke, J.A. and Hensen, J. (2001) Integrated simulation for sustainable building design: an example state-of-the-art system. In: Proceedings of the International Construction Information Technology Conference (CIT 2000). CIB, Reykjavik, Iceland, pp. 465-475. ISBN 9979-9174-3-1

Clarke, J.A. and Cockroft, J. and Conner, S. and Hand, J. and Kelly, N.J. and Moore, R. and O'Brien, T. and Strachan, P.A. (2001) Control in building energy management systems : the role of simulation. In: Proceedings of the 7th international building performance simulation association conference. IBPSA, pp. 99-106.

Deans, J. and Dempster, W.M. and Carter, L.J. (2001) A thermal imaging procedure for landmine detection. In: Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics. Edizioni ETS.

Dempster, W.M. (2001) CFD modelling of two-phase mixing/separation flow. In: Computational Fluid Dynamics in Practice. Wiley Blackwell.

Dempster, W.M. and Arebi, B. (2001) Experimental characteristcs of steam bubble growth at orifices in sub-cooled liquid. International Communications in Heat and Mass Transfer, 28 (4). pp. 467-477. ISSN 0735-1933

Dempster, W.M. and Deans, J. and Stickland, M.T. (2001) Filling the gap: engineering design analysis within a mechanical engineering curriculum. In: Proceedings of the International Conference on Engineering Design, Computer Based Design. John Wiley & Sons. ISBN 1860583547

Dempster, W.M. and Stickland, M.T. and Vidinha, T. (2001) Liquid velocity field measurements during bubble formation and detachment at an orifice. In: UK/Japan Seminar on Multiphase Flow, 2000-02-29, Bury St Edmonds, England.

Doyle, G.T. and Pethrick, R.A. and Banks, W.M. (2001) Novel non-destructive technique for the evaluation of adhesively bonded structures. In: Proceedings of the 24th annual meeting of the Adhesion Society: February 25 - 28, 2001, Williamsburg, VA. Adhesion Society, pp. 80-82.

Fernandez, J. and Scanlon, T.J. and Stickland, M.T. (2001) Mapping the velocity field in a pump impeller using high speed digital video, image derotation and particle image velocimetry. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14, Limerick, Ireland.

Fernandez, J. and Blanco, E. and Parrondo, J. and Stickland, M.T. and Scanlon, T.J. (2001) Ironwork of Teixois-Taramundi (Asturias) Spain. In: International Symposium on History of Machines and Mechanisms, HMM 2000, 2000-05-11 - 2000-05-13, Cassino, Italy.

Fleming, J.S. and Yan, Y. and Gutierrez-Vega, M. and Yanagisawa, T. (2001) The economics of compressor modelling. In: Compressors and their systems. IMECHE Conference Transactions . Professional Engineering Publishing, Wiltshire, UK, pp. 359-370. ISBN 186058330X

Galbraith, G.H. and Guo, J. and McLean, R.C. and Munsi, A.S.M.Y. and Sanders, C.H. (2001) The effect of instrument resolution on diffusion coefficients measured using NMR spectroscopy. Materials and Structures, 34 (7). pp. 389-395. ISSN 1359-5997

Galbraith, Graham H. and Li, Jintang and Guo, Jiansong and Kelly, David and McLean, R. Craig and Grunewald, John (2001) Evaluation of discretized transport properties for numerical modelling of heat and moisture transfer in building structures. Journal of Thermal Envelope and Building Science, 34 (3). pp. 240-260. ISSN 1097-1963

Gorman, Daniel G. and Reese, J.M. and Horáček, J. and Dedouch, K. (2001) Vibration analysis of a circular disc backed by a cylindrical cavity. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (11). pp. 1303-1311. ISSN 0954-4062

Hand, J. (2001) The application of simulation in building design and guidance on modelling approaches. In: Proceedings of eSIM 2001 Conference on Building Energy Simulation. CANMET Energy Technology Centre, Ottowa. ISBN 0660616505

Hensen, J. and Clarke, J.A. (2001) Building systems and indoor environment: simulation for design decision support. In: International Conference on Design and Decision Support Systems in Architecture and Urban Planning, 2001-07-01, Eindhoven, The Netherlands.

Hensen, J. and Clarke, J.A. (2001) Integrated simulation for (sustainable) building design: state-of-the-art illustration. In: Proceedings of the International Conference on Sustainable Building. Aeneas, pp. 22-25. ISBN 9075365365

Hughes, G.W. and McInnes, C.R. (2001) Solar sail hybrid trajectory optimization. In: Advances in Astronautical Science. American Astronautical Society.

Johnson, G.R. and Carus, D. and Parrini, G. and Marchese, S.S. and Valeggi, R. (2001) The design of a five-degree-of-freedom powered orthosis for the upper limb. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 215 (3). pp. 275-284. ISSN 0954-4119

Kummert, M. (2001) The SOLTHERM quality charter for suppliers and installers in Wallonia. In: OPET Workshop, International Symposium and Exhibition on Fostering the development of Solar Thermal Energy in Europe, 1900-01-01.

Kummert, M. (2001) Using TRNSYS to obtain a performance comparison of commercial SDHW systems. In: TRNSYS Users Conference, 2001-02-01, Liège, Belgium.

Kummert, M. and Andre, P. and Nicolas, J. (2001) Optimal heating control in a passive solar commercial building. Solar Energy, 69. pp. 103-116. ISSN 0038-092X

Li, Y. and Crowther, D. and Wilson, J.A. and Craven, A.J. and Baker, T.N. (2001) Precipitation in vanadium and vanadium-titanium microalloyed steels. Institute of Physics Conference Series, 168. pp. 183-187. ISSN 0951-3248

Li, Y. and Crowther, D.N. and Green, M.J.W. and Mitchell, P.S. and Baker, T.N. (2001) The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ International, 41 (1). pp. 46-55. ISSN 0915-1559

Liu, H. and Lyon, S.B. and Stack, M.M. (2001) The partial ionic and electronic conductivity of Y-containing and Y-free chromia scales. Oxidation of Metals, 56 (1-2). pp. 147-161. ISSN 0030-770X

Lu, Q. and Stack, M.M. and Wiseman, C.R. (2001) AC impedence spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors. Journal of Applied Electrochemistry, 31 (12). pp. 1373-1379. ISSN 0021-891X

Macdonald, M. and McInnes, C.R. (2001) Analytic control laws for near-optimal geocentric solar sail transfers. In: Advances in Astronautical Science. American Astronautical Society, pp. 2693-2411. ISBN 0-87703-488-5

Mair, G.M. and Clark, J.E. and Hardiman, R.J. and McKay, S. and Mason, S. (2001) Low bandwidth transatlantic autostereoscopic telepresence. In: To be ascertained, 1900-01-01.

Mathew, M.T. and Chi, K. and Stack, M.M. (2001) Significance of oil analysis in condition monitoring - a review. In: 13th National Conference on Recent Trends in Condition Monitoring of Machines (NaCoMM-2001), 2001-12-21 - 2001-12-22, Karagpur, India.

McInnes, C.R. (2001) Near-term mission applications for low performance solar sails. In: Proceedings of AIP Space Technology and Applications International Forum/Staif, Space Exploration and Transportation - Journey into the Future. American Institute of Physics, pp. 379-384. ISBN 1563969815

McInnes, C.R. and Cartmell, M. and Radice, G. (2001) Advances in space systems engineering at the University of Glasgow. Aircraft Engineering and Aerospace Technology, 73 (4). pp. 360-366. ISSN 0002-2667

McInnes, C.R. and Eiden, M. and Groepper, P. and Peacock, T. (2001) Solar sailing - Mission opportunities and innovative technology demonstration. ESA European Space Agency Bulletin, 108. pp. 58-65. ISSN 0376-4265

McIvor, Arthur and Johnston, R. (2001) Dust to dust: Oral testimonies of asbestos-related disease on Clydeside. Oral History, 29 (2). pp. 48-61. ISSN 0143-0955

McKay, S. and Scanlon, T.J. and Stickland, M.T. (2001) The development of a three-dimensional imaging system and its application in fluid mechanics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (12). pp. 1459-1463. ISSN 0954-4062

McPherson, N.A. and Chi, K. and Noriega-Martinez, I. and Baker, T.N. (2001) Autogeneous laser welding of dessimilar joints of stainless steel and carbon steel. In: Stainless Steel World 2001, 2001-11-13 - 2001-11-15, Den Hasg, Netherlands.

Morbitzer, C. and Strachan, P.A. and Webster, J. and Spires, B. and Cafferty, D. (2001) Integration of building simulation into the design process of an architectural practice. In: Proceedings of the 7th International Building Performance Simulation Association Conference. International Building Performance Simulation Association. ISBN 85-901939-3-4

Munsi, A.S.M.Y. and Walker, C.A. and Waddell, A.J. (2001) Vibratory stress relief - an investigation of the torsional stress effect in welded shafts. Journal of Strain Analysis for Engineering Design, 36 (5). pp. 453-464. ISSN 0309-3247

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) The effect of vibratory stress on the welding microstructure and residual stress distribution. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 215 (2). pp. 99-111. ISSN 1464-4207

Munsi, A.S.M.Y. and Waddell, A.J. and Walker, C.A. (2001) The influence of vibratory treatment on the fatigue life of welds: a comparison with thermal stress relief. Strain, 37 (4). pp. 142-150. ISSN 0039-2103

Myles, C.M. and Rowe, P.J. and Walker, C. and Nutton, R.W. (2001) An RCT to investigate the functional outcome following total knee replacement with or without patella resurfacing. In: Scottish Physiotherapists Research Workshop, 2001-04-24, Stirling.

Nash, D.H. and Spence, J. and Tooth, A.S. and Abid, M. and Power, D.J. (2001) A parametric study of metal-to-metal full face taper-hub flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 791-797. ISSN 0308-0161

Nutton, R.W. and Myles, C.M. and Rowe, P.J. and Walker, C. (2001) The influence of age, gender, height and body mass on lumbar spinal range of motion measured using the isotrak. In: 18th Congress of the International Society of Biomechanics, 2001-07-08 - 2001-07-13, Zurich. (Unpublished)

Otten, M. and McInnes, C.R. (2001) Near minimum-time trajectories for solar sails. Journal of Guidance, Control and Dynamics, 24 (5). pp. 632-634. ISSN 0731-5090

Ponter, A.R.S. and Chen, H. (2001) A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit. European Journal of Mechanics - A/Solids, 20 (4). pp. 539-553. ISSN 0997-7538

Radice, G. and McInnes, C.R. (2001) Autonomous satellite constellations for planetary exploration. In: Proceedings of the 3rd International NAISO Congress on Information Service Innovations (ISI'2001). NAISO. ISBN 3-906454-25-8

Radice, G. and McInnes, C.R. (2001) Multiple target selection and obstacle avoidance using potential function guidance method. In: Advances in Astronautical Science. American Astronautical Society, pp. 1721-1732. ISBN 0-87703-488-5

Rhodes, J. (2001) Some observations on the post-buckling behaviour of thin plates and thin-walled members. In: Proceedings of the Third International Conference on Thin-Walled Structures: Advances and Developments. Elsevier, London, UK, pp. 69-84. ISBN 0080439551

Rhodes, James and Macdonald, Martin and Kotelko, M. and McNiff, W. (2001) Buckling load capacity of stainless steel columns subjected to concentric and eccentric loading. In: Proceedings of the 3rd International Conference on Thin-Walled Structures: Advances and Developments. Elsevier, London, UK, pp. 225-232. ISBN 0080439551

Roger, A. and Welsh, T. and McInnes, C.R. (2001) Tuneable autonomy and human interfaces for free-flying servicing vehicles. In: Proceedings of AIP Space Technology and Applications International Forum/Staif, Space Exploration and Transportation - Journey into the Future. American Institute of Physics, pp. 103-108. ISBN 1-56396-980-7

Rowe, P.J. and Myles, C.M. and Walker, C. and Nutton, R.W. (2001) Knee joint kinematics in gait and other functional activities two years after knee replacement: is the patients function normal. In: 18th Congress of the International Society of Biomechanics, 2001-07-08 - 2001-07-13, Zurich. (Unpublished)

Salamana, M. and McInnes, C.R. and Mulligan, P. (2001) Gossamer sailcraft technology. In: Gossamer Spacecraft: Membrane and Inflatable Structures Technology for Space Applications. American Institute of Aeronautics and Astronautics. ISBN 1-56347-777-7

Scanlon, T.J. and Stickland, M.T. (2001) An experimental and numerical investigation of natural convection melting. International Communications in Heat and Mass Transfer, 28 (2). pp. 181-190. ISSN 0735-1933

Scanlon, T.J. and Stickland, M.T. and Lacombe, M. (2001) A PIV analysis of natural convection ice melting. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14, Limerick, Ireland.

Spathopoulos, M.P. and Fragopoulos, D. (2001) Control design of a crane for offshore lifting operations. In: Nonlinear control in the year 2000, vol 2. Lecture Notes in Control and Information Sciences, 259 (2). Springer, pp. 469-486. ISBN 1-85233-364-2

Stack, M.M. (2001) Mapping erosion of MMCs at elevated temperatures: some recent advances. In: Proceedings of the 13th International Conference on Wear of Materials. Elsevier. ISBN 0-08-044007-X

Stack, M.M. (2001) Solid particle erosion of MMCs - a perspective on room and elevated temperature erosion performance. In: Microstructural design against wear and erosion of metals and surface coatings at elevated temperatures, 2001-11-21, London, UK.

Stack, M.M. and Pena, D. (2001) Mapping the erosion of Ni-Cr/WC-based composites at elevated temperatures: some recent advances. WEAR, 251 (1-12). pp. 1433-1451. ISSN 0043-1648

Thomason, J.L. (2001) Injection mouldable 'long' natural fibre reinforced polypropylene for automotive applications. In: Proceedings of the Society of Automotive Engineers World Congress 2001. SAE International.

Thomason, J.L. (2001) Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? In: Proceedings of the 7th International Conference on Interfacial Phenomena in Composite Materials (IPCM7). Butterworth-Heinemann.

Thomason, J.L. (2001) Micromechanical parameters from macromechanical measurements on glass-reinforced polyamide. Composites Science and Technology, 61 (14). pp. 2007-2016. ISSN 0266-3538

Trendafilova, I. (2001) Pattern recognition methods for damage diagnosis in structures from vibration measurements. In: Damage Assessment of Structures. Key Engineering Materials, 204-2 . Trans Tech Publications Ltd, pp. 85-96. ISBN 0-87849-879-6

Trendafilova, I. and Heylen, W. and Van Brussel, H.H. (2001) Measurement point selection in damage detection using the mutual information concept. Smart Materials and Structures, 10 (3). pp. 528-533. ISSN 0964-1726

Trendafilova, I. and Van Brussel, H.H. (2001) Nonlinear dynamics tools for the motion analysis and condition monitoring of robot joints. Mechanical Systems and Signal Processing, 15 (6). pp. 1141-1164. ISSN 0888-3270

Vidinha, T. and Dempster, W.M. and Stickland, M.T. (2001) Liquid velocity field measurements during bubble formation and detachment at an orifice. In: 9th International Conference on Laser Anemometry, 2001-09-12 - 2001-09-14, Limerick, Ireland.

Vital, A. and Vogt, U. and Graule, T. and Graehlert, W. and Leparoux, M. and Hopfe, V. and Ewing, H.C. and Daum, R. and Beil, A. (2001) Prototype reactor for scale-up of Si-N-O fibre production. In: 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings. Ceramic Engineering and Science Proceedings, 21 . Wiley, pp. 299-306. ISBN 9780470294635

Walker, C.A. (2001) Editorial Article. Strain, 37 (2). p. 1. ISSN 0039-2103

Walker, C.A. and Blair, R. (2001) An experimental review of the McMahon/Cheng model of running. Sports Engineering, 4 (3). pp. 113-122. ISSN 1369-7072

Wang, H.W. and Stack, M.M. and Hovsepian, P. (2001) Macroparticle induced corrosion for arc bond sputtering CrN/Nbn superlattice coatings. Journal of Materials Science Letters, 20 (21). pp. 1995-1997. ISSN 0261-8028

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2001) Preferential erosive wear of droplet particles for cathodic arc/unbalanced magnetron sputtering CrN.NbN superlattice PVD coatings. Journal of Materials Science Letters, 20 (6). pp. 547-550. ISSN 0261-8028

Zaras, J. and Kowal-Michalska, K. and Rhodes, J. (2001) Thin-Walled Structures - Advances and Developments, Proceedings of the 3rd ICTWS Conference 2001. Elsevier Science. ISBN 0080439551

Zhang, Y.L. and Reese, J.M. (2001) Particle-gas turbulence interactions in a kinetic theory approach to granular flows. International Journal of Multiphase Flow, 27 (11). pp. 1945-1964. ISSN 0301-9322

Zhang, Y.L. and Reese, J.M. and Gorman, D. (2001) The vibration of prestressed orthotropic cylindrical shells conveying fluid. In: Proceedings of the ASME Pressure Vessels and Piping Symposium on Flow-Induced Vibration. ASME, pp. 191-198. ISBN 0791841898

Zhang, Yonghao and Reese, Jason (2001) Using a kinetic theory approach incorporating interaction with the air to model granular flow down a chute. In: Handbook of Powder Technology Vol 10. Elsevier Science Ltd, Amsterdam, 255-261, Chapter 3.2. ISBN 0-444-50235-1

Zhang, Yonghao and Reese, Jason (2000) The influence of the drag force due to the interstitial gas on granular flows down a chute. International Journal of Multiphase Flow, 26 (12). pp. 2049-2072. ISSN 0301-9322

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2000) Wear associated with growth defects in combined cathodic arc/unbalanced magnetron sputtered CrN/NbN superlattice coatings during erosion in alkaline slurry. Surface and Coatings Technology, 135 (1). pp. 82-90. ISSN 0257-8972

Banks, W.M. and Nash, D.H. and Flaherty, A.E. and Fok, W.C. and Tooth, A.S. (2000) A simplified design approach to determine the maximum strains in a grp vessel supported on twin saddles. International Journal of Pressure Vessels and Piping, 77 (13). pp. 837-842. ISSN 0308-0161

Nash, D.H. and Abid, M. (2000) Combined external load tests for standard and compact flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 799-806. ISSN 0308-0161

Wang, H W and Stack, M M (2000) The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles. Journal of Materials Science, 35 (21). pp. 5263-5273. ISSN 0022-2461

Lu, Q and Stack, M M and Wiseman, C R (2000) Corrosion behaviour and characterisation of iron in hot flowing Bayer liquors. Materials and Corrosion-Werkstoffe und Korrosion, 51 (10). pp. 705-711. ISSN 0947-5117

Rowe, P.J. and Myles, C.M. and Walker, C. and Nutton, R. (2000) Knee joint kinematics in gait and other functional activities measured using flexible electrogoniometry: how much knee motion is sufficient for normal daily life? Gait and Posture, 12 (2). pp. 143-155. ISSN 0966-6362

Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-I. (Ti,Nb)(C,N) particles. Acta Materialia, 48 (15). pp. 3857-3868. ISSN 1359-6454

Craven, A.J. and He, K. and Garvie, L.A.J. and Baker, T.N. (2000) Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-II. Non-titanium based particles. Acta Materialia, 48 (15). pp. 3869-3878. ISSN 1359-6454

Shi, Zhusheng and Reese, Jason and Chandler, Howard (2000) The application of a shock wave model to some industrial bubbly fluid flows. International Journal of Engineering Science, 38. pp. 1617-1638. ISSN 0020-7225

Zhang, Y.L. and Gorman, Daniel and Reese, Jason (2000) A new model for the vibration of an initially-stretched tube conveying pulsatile fluid flow. In: 7th International Conference on Flow-Induced Vibration, 2000-06-19 - 2000-06-22, Lucerne.

Stickland, M.T. and Scanlon, T.J. and Blanco-Marigorta, E. and Fernandez-Francos, J. and Gonzalez-Perez, J. and Santolaria-Morros, C. (2000) Numerical flow simulation in a centrifugal pump with impeller-volute interaction. In: Proceedings of the ASME 2000 Fluids Engineering Division Summer Meeting. ASME. ISBN 0791819795

Stickland, M.T. and Scanlon, T.J. and Blanco-Marigorta, E. and Fernandez-Francos, J. and Santolaria-Morros, C. and Parrondo-Gayo, J.L. (2000) Numerical simulation of centrifugal pumps. In: Proceedings of ASME 2000 Fluids Engineering Division Summer Meeting. ASME. ISBN 0791819665

Stickland, M.T. and Scanlon, T.J. and Parrondo, J. and Gonzalez-Perez, J. and Fernandez-Francos, J. (2000) An experimental study on the unsteady pressure distribution around the impeller outlet of a centrifugal pump. In: Proceedings of ASME 2000 Fluids Engineering Division Summer Meeting. ASME. ISBN 0791819795

Zhang, Yonghao and Reese, Jason (2000) On gas-solid interactions in the flow of granular material down a chute. In: 3rd Israeli Conference on Conveying and Handling of Particulate Solids, 2000-05-29 - 2000-06-01, Dead Sea.

McKay, S. and Mair, G.M. and Mason, S. and Revie, Kenneth (2000) Membrane mirror based autostereoscopic display for teleoperation and telepresence. In: Proceedings of SPIE. SPIE, UK, pp. 198-207. ISBN 9780819435750

Wang, H W and Stack, M M and Lyon, S B and Hovsepian, P and Munz, W D (2000) The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings. Surface and Coatings Technology, 126 (2-3). pp. 279-287. ISSN 0257-8972

Zhang, Y.L. and Gorman, Daniel and Reese, Jason and Horacek, Jaromir (2000) Observations on the vibration of axially-tensioned elastomeric pipes conveying fluids. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (3). pp. 423-434. ISSN 0954-4062

Gorman, Daniel and Reese, Jason and Zhang, Y.L. (2000) Vibration of a flexible pipe conveying viscous pulsating fluid flow. Journal of Sound and Vibration, 230 (2). pp. 379-392. ISSN 0022-460X

Vasile, Massimiliano and Finzi, Amalia E. (2000) Direct lunar descent optimisation by finite elements in time approach. International Journal of Mechanics and Control, 1 (1). ISSN 1590-8844

Abid, M. and Nash, D.H. and Webjorn, J. (2000) The stamina of non-gasketed, flanged pipe connections. In: Fatigue 2000 - Fatigue and Durability Assessment of Materials, Components and Structures: Proceedings of the Fourth International Conference of the Engineering Integrity Society. EMAS Publishing, pp. 575-584. ISBN 1 901537 16 1

Chen, Haofeng and Shu, D.W. (2000) Lower and upper bound limit analyses for pipeline with multi-slots of various configurations. International Journal of Pressure Vessels and Piping, 77 (1). pp. 17-25. ISSN 0308-0161

Chen, Haofeng and Shu, D.W. (2000) The effects of the distance between two defects on the load carrying capacity of pressure vessel. Journal of Pressure Vessel Technology, 122 (2). pp. 198-203. ISSN 0094-9930

Liu, Y.H. and Cen, Z.Z. and Chen, Haofeng and Xu, B.Y. (2000) Plastic collapse analysis of defective pipelines under multi-loading systems. International Journal of Mechanical Sciences, 42 (8). pp. 1607-1622. ISSN 0020-7403

Nash, D.H. and Flaherty, A.E. and Banks, W.M. and Fok, W.C. and Tooth, A.S. (2000) The design of twin-saddle supported multi-layered glass-reinforced plastic vessels - the development of a parametric equation for the maximum strain. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 214 (3). pp. 113-128. ISSN 1464-4207

Oldroyd, A. and Stickland, M.T. and Strachan, P.A. (2000) Introducing instrumentation and data acquisition to mechanical engineering students using LabVIEW. International Journal of Engineering Education, 16 (4). pp. 315-326. ISSN 0949-149X

Shi, Z. and Reese, Jason (2000) Shock waves in bubbly flows in the oil/gas industry. In: 22nd International Symposium on Shock Waves, 2000-01-01 - 2000-01-02, London.

Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. WEAR, 235. pp. 484-496. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. WEAR, 233-235. pp. 535-541. ISSN 0043-1648

Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. WEAR, 233-235. pp. 542-551. ISSN 0043-1648

Liu, H. and Mojica-Calderon, C and Lyon, S.B. and Stack, M.M. (1999) In situ solid state electrochemical impedance spectroscopy of NiO scales. Solid State Ionics, 126 (3-4). pp. 363-372. ISSN 0167-2738

Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X

Zhang, Y.L. and Gorman, Daniel and Reese, Jason (1999) Eigenmode analysis of a cylindrical shell conveying a viscous fluid. In: 3rd EUROMECH Conference on Engineering Aero-Hydroelasticity, 1999-09-13 - 1999-09-15, Prague.

Zhang, Y.L. and Gorman, Daniel and Reese, Jason (1999) Analysis of the vibration of pipes conveying fluid. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (8). pp. 849-860. ISSN 0954-4062

Clarke, J A and Johnstone, C M and Kelly, N and McClean, R C and Anderson, J A and Rowan, N E and Smith, J E (1999) A technique for the prediction of the conditions leading to mould growth in buildings. Building and Environment, 34 (4). pp. 515-521. ISSN 0360-1323

Rhodes, J. and Nash, D.H. and Macdonald, M. (1999) An examination of web crushing in thin-walled beams. In: The Fourth International Conference on Steel and Aluminium Structures, 1999-06-20 - 1999-06-23, Espoo, Finland.

Waddell, P. and Stickland, M.T. and Mason, S. and McKay, S. (1999) Comparison of the computed flow field around a bubble growing at an orifice using PIV techniques. In: Proceedings of the Second International Symposium on Two-Phase Flow Modelling and Experimentation. Edizioni ETS, p. 1365. ISBN 88-467-0177-1

Stack, M M and Corlett, N and Zhou, S (1999) Impact angle effects on the transition boundaries of the aqueous erosion-corrosion map. WEAR, 229. pp. 190-198. ISSN 0043-1648

Stack, M.M. and Pena, D. (1999) Particle size effects on the elevated temperature erosion behaviour of Ni-Cr/WC MMC-based coatings. Surface and Coatings Technology, 113 (1-2). pp. 5-12. ISSN 0257-8972

Stack, M.M. and Wang, H.W. and Munz, W.D. (1999) Some thoughts on the construction of erosion-corrosion maps for PVD coated steels in aqueous environments. Surface and Coatings Technology, 113 (1-2). pp. 52-62. ISSN 0257-8972

Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836

Houston, Parul and Dickson, Marion and Ludbrook, Valerie and White, Brian and Schwachtgen, Jean-Luc and McVey, John H. and Mackman, Nigel and Reese, Jason and Gorman, Daniel and Campbell, Callum and Braddock, Martin (1999) Fluid shear stress induction of the tissue factor promoter in vitro and in vivo is mediated by Egr-1. Arteriosclerosis Thrombosis, and Vascular Biology, 19 (2). pp. 281-289. ISSN 1524-4636

Wang, H.W. and Stack, M.M. (1999) The slurry erosive wear of physically vapour deposited TiN and CrN coatings under controlled corrosion. Tribology letters, 6 (1). pp. 23-36. ISSN 1023-8883

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1999) On the solution of limit load and reference stress of 3-D structures under multi-loading systems. Engineering Structures, 21 (6). pp. 530-537. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (1999) A numerical method for lower bound limit analysis of 3-D structures with multi-loading systems. International Journal of Pressure Vessels and Piping, 76 (2). pp. 105-112. ISSN 0308-0161

Liu, H. and Stack, Margaret and Lyon, S.B. (1998) Ionic transport numbers in Cr2O3 scales and reactive element effects. Chinese Journal of Materials Research, 12. pp. 52-56. ISSN 1005-3093

Reese, Jason and Thompson, David S. (1998) Shear stress in arterial stenoses : a momentum integral model. Journal of Biomechanics, 31 (11). pp. 1051-1057. ISSN 0021-9290

Stack, Margaret (1998) Control of erosive wear in corrosive environments using erosion-corrosion maps : Potential applications to fossil fuel environments. In: Corrosion '98 Conference, 1998-10-01, Houston, Texas.

Reese, Jason (1998) Burnett predictions of rarefied gas shock structure : Comparison of theory and experiment. In: 21st International Symposium on Shock Waves, 1997-09-01 - 1997-09-07, Great Keppel Island.

Rhodes, J. and Nash, D.H. (1998) An investigation of web crushing behaviour in thin-walled beams. Thin-Walled Structures, 32 (1-3). pp. 207-230. ISSN 0263-8231

Wang, H.W. and Stack, M.M. (1998) Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buffer slurries containing alumina particles. Surface and Coatings Technology, 106 (1). pp. 1-7. ISSN 0257-8972

Wang, H.W. and Stack, M.M. (1998) Corrosion of PVD TiN coatings under simultaneous erosion in sodium carbonate bicarbonate buffered slurries. Surface and Coatings Technology, 105 (1-2). pp. 141-146. ISSN 0257-8972

Liu, H. and Stack, M.M. and Lyon, S.B. (1998) Reactive element effects on the ionic transport processes in Cr2O3 scales. Solid State Ionics, 109 (3-4). pp. 247-257. ISSN 0167-2738

Corlett, N. and Stack, Margaret and Turgoose, S. and Zhou, S (1998) Development of a theoretical model to describe the erosion-corrosion wastage process under aqueous slurry conditions : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. Electrochemical Society Proceedings, 98 . The Electrochemical Society, New Jersey. ISBN 1566771994

Jiang, J R and Stott, F H and Stack, M M (1998) The role of triboparticulates in dry sliding wear. Tribology International, 31 (5). pp. 245-256. ISSN 0301-679X

Liu, H. and Stack, Margaret and Lyon, S.B. (1998) Ionic partial conductivity in chromia scales : Extended Abstract. In: Environmental issues in the electronics/semiconductor industries and. The Electrochemical Society, New Jersey. ISBN 1-56677-199-4

Stack, M M and Pungwiwat, N (1998) A note on the construction of materials performance maps for resistance to erosion in aqueous slurries. WEAR, 215 (1-2). pp. 67-76. ISSN 0043-1648

Stack, M M and Corlett, N and Zhou, S (1998) Some thoughts on the effect of elastic rebounds on the boundaries of the aqueous erosion-corrosion map. WEAR, 214 (2). pp. 175-185. ISSN 0043-1648

Nash, D.H. and Banks, W.M. and Bernaudon, F. (1998) Finite element modelling of sling-supported pressure vessels. Thin-Walled Structures, 30 (1-4). pp. 95-110. ISSN 0263-8231

Cen, Z.Z. and Chen, Haofeng and Liu, Y.H. and Xu, B.Y. (1998) Collapse load computation of defective pipelines under multi-loading system. Metals and Materials International, 4 (3). pp. 306-310.

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) Numerical analysis of limit load and reference stress of defective pipelines under multi-loading system. International Journal of Pressure Vessels and Piping, 75 (2). pp. 105-114. ISSN 0308-0161

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) A numerical method for limit analysis of structures under multi-loading systems. Journal of Tsinghua University and Peking University : Science and Technology., 8. 28－35.

Edrees, H.J. and Smith, A.C. and Hendry, A. (1998) A rule-of-mixtures model for sintering of particle-reinforced ceramic-matrix composites. Journal of the European Ceramic Society, 18 (3). pp. 275-278. ISSN 0955-2219

Stack, Margaret and Chacon-Nava, J.G. and Stott, F.H. (1998) The erosion-corrosion performance of mild steel and SA313-T22 steel in low velocity conditions. In: 3rd NACE Latin American Region Corrosion Conference, 1998-10-01, Mexico.

Vasile, Massimiliano and Finzi, Amalia E. (1997) Numerical solutions for lunar orbits. In: 48th International Astronautical Congress, 1997-10-06 - 1997-10-10, Turin.

Stack, Margaret and Pena, D. (1997) Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites. In: Microscopy of Oxidation. Institute of Materials, London, UK, pp. 757-765. ISBN 9781861250346

Jiang, J. and Stott, F.H. and Stack, Margaret (1997) The role of triboparticulates in dry sliding wear. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, Bath, UK, p. 135. ISBN 978-1+-86058-109-0

Stack, Margaret and Pena, D. (1997) Approaches to constructing materials performance maps for exposure to elevated temperature erosion. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, p. 222. ISBN 978-1-86058-109-0

Wang, H.W. and Stack, Margaret (1997) Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, Bath, UK, p. 215. ISBN 978-1-86058-109-0

Jiang, Jiaren and Stott, F.H. and Stack, M.M. (1997) Characterization of wear scar surfaces using combined three-dimensional topographic analysis and contact resistance measurements. Tribology International, 30 (7). pp. 517-526. ISSN 0301-679X

Reese, Jason (1997) Characterisation of the flow in the molten metal sump during direct chill aluminium casting. Metallurgical and Materials Transactions B, 28 (3). pp. 491-499. ISSN 1073-5615

Stack, M.M. (1997) Some issues relating to the construction of materials selection maps for resistance to elevated temperature erosion. Tribology International, 30 (6). pp. 435-444. ISSN 0301-679X

Stott, F.H. and Jiang, J. and Stack, Margaret (1997) Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys. In: Advances in Surface Engineering. Advances in Surface Engineering, 1 . Royal Society of Chemistry, Cambridge, UK, pp. 143-157. ISBN 0854047475

Nash, D.H. and Banks, W.M. (1997) Numerical analysis of a sling support arrangement for grp composite pressure vessels. Composite Structures. pp. 679-687. ISSN 0263-8223

Jiang, Jiaren and Stott, F.H. and Stack, M.M. (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. WEAR, 203-204. pp. 615-625. ISSN 0043-1648

Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. WEAR, 203. pp. 474-488. ISSN 0043-1648

Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. WEAR, 203. pp. 489-497. ISSN 0043-1648

Dauplais, M. and Lecoq, A. and Song, J.X. and Cotton, J. and Jamin, N. and Gilquin, B. and Rowan, E.G. and Vita, C. (1997) On the convergent evolution of animal toxins - conservation of a diad of functional residues in potassium channel-blocking toxins with unrelated structures. Journal of Biological Chemistry, 272 (7). pp. 4302-4309. ISSN 0021-9258

Chen, Haofeng and Cen, Z.Z. and Xu, B.Y. and Zhan, S.G. (1997) A numerical method for reference stress in the evaluation of structure integrity. International Journal of Pressure Vessels and Piping, 71. pp. 47-53. ISSN 0308-0161

Dempster, W.M. and Lothian, L. and Stickland, M.T. (1997) Particle image velocimetry studies of bubble growth and detachment by high speed photography. In: Proceedings of the 22nd International Symposium on High Speed Photography and Photonics. SPIE.

Stack, M M (1997) Optimizing the performance of materials in FBC conditions using erosion-corrosion wastage and materials performance maps. Materials at High Temperatures, 14 (3). pp. 313-324. ISSN 0960-3409

Stack, Margaret and Pena, D. (1997) Surface engineering of composite and graded coatings for resistance to solid particle erosion at elevated temperatures. In: Advances in Surface Engineering. Royal Society of Chemistry, Cambridge, UK, pp. 236-252. ISBN 0854047573

Stickland, M.T. and Scanlon, T.J. and Oldroyd, A. and Waddell, P. and Crawley, F. and Stubbs, B. (1997) An experimental and computational analysis of buoyancy driven flows by laser sheet tomography, particle image velocimetry and computational fluid dynamics. In: Proceedings of the First Pacific Symposium on Flow Visualisation and Image Processing. Association for Computing Machinery (ACM).

Stack, Margaret and Chacon-Nava, J.G. and Rehberg, M. (1996) Elevated temperature erosion resistance of Ni-based functionally graded materials. In: Proceedings of the 2nd International Conference on Heat Resistant Materials. ASM International, pp. 445-452. ISBN 978-0871705396

Zhou, S. and Stack, M.M. and Newman, R.C. (1996) Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion - Houston Tx, 52 (12). pp. 934-946. ISSN 0010-9312

Stack, Margaret and Pena, D. (1996) Construction of erosion maps for erosion of MMCs and FGMs at elevated temperatures. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29, Melbourne.

Stack, Margaret and Zhou, S and Newman, R.C. (1996) An approach to defining erosion-corrosion regimes for erosion in aqueous slurries. In: International Conference on Corrosion, 1996-11-25 - 1996-11-29, Melbourne.

Heath, G. and Kammer, P. and Stack, Margaret (1996) The high temperature erosion-corrosion behaviour of industrial thermal sprayed coatings. In: Proceedings of the 9th Thermal Spray Technology Conference and Exposition, NTSC'96. Springer.

Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836

Zhou, S and Stack, M M and Newman, R C (1996) Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions. Corrosion Science, 38 (7). pp. 1071-1084. ISSN 0010-938X

Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836

Stack, M.M. and Chacon-Nava, J. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836

Stack, Margaret (1996) Book Review : Fretting and Fatigue. [Review]

Chen, Haofeng and Song, J. (1996) The influence of strain-rate on the residual stress fields of thick-walled cylinder. Engineering Mechanics, 13. pp. 125-131. ISSN 1802-1484

Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093

Stack, M.M. and Chacon-Nava, J.G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836

Abed, A. and Smith, A.C. and Hendry, A. (1995) Interfacial behaviour in ceramic-metal composites. Silicates Industriels, 60 (11-12). pp. 313-319. ISSN 0037-5225

Stack, M.M. and Lekatos, S. and Stott, F.H. (1995) Erosion-corrosion regimes : number, nomenclature and justification? Tribology International, 28 (7). pp. 445-451. ISSN 0301-679X

Stack, Margaret and Corlett, N. and Zhou, S (1995) Optimization of aqueous erosion-corrosion parameters using erosion-corrosion maps for erosion-corrosion in aqueous slurries. In: International Conference on Tribology 1995, 1995-10-29 - 1995-11-02, Yokahama.

Reese, Jason and Thiele, F. and Woods, L.C. (1995) On appropriate boundary conditions for rarefied gas shock wave calculations. In: 19th International Symposium on Rarefied Gas Dynamics, 1994-07-25 - 1994-07-29, Oxford.

Stack, Margaret and Pena, D. and Chacon-Nava, J.G. (1995) Identification of transitions in erosion regimes for the erosion of metal matrix composites at elevated temperatures. In: Proceedings of the 2nd International Conference on Composites Engineering. University of New Orleans Press, New Orleans, pp. 707-708.

Stack, M.M. and Zhou, S. and Newman, R.C. (1995) Identification of transitions in erosion-corrosion regimes in aqueous environments. WEAR, 186-187 (2). pp. 523-532. ISSN 0043-1648

STOTT, F H and JORDAN, M P and LEKATOS, S and STACK, M M and WOOD, G C (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. WEAR, 186 (1). pp. 291-298. ISSN 0043-1648

Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. WEAR, 186-187 (1). pp. 273-283. ISSN 0043-1648

Stack, Margaret (1995) Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions. In: Workshop on Corrosion in Alumina Plants, 1995-06-06 - 1995-06-08.

STOTT, F H and LEKATOS, S and JORDAN, M P and WOOD, G C and STACK, M M (1995) The interactions of sulphidation and particle erosion at high temperatures. Materials and Corrosion-Werkstoffe und Korrosion, 46 (5). pp. 261-270. ISSN 0947-5117

Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M. (1995) A second order description of shock structure. Journal of Computational Physics, 117 (2). pp. 240-250. ISSN 0021-9991

Stack, M.M. and Song-Roehrle, Q. and Stott, F.H. and Wood, G.C. (1995) Computer simulation of erosion-corrosion interactions at elevated temperatures. WEAR, 181-183 (2). pp. 516-523. ISSN 0043-1648

Stott, F.H. and Jiang, Jiaren and STACK, M.M. (1995) A mathematical model for sliding wear of metals at elevated temperatures. WEAR, 181-183 (1). pp. 20-31. ISSN 0043-1648

Stack, M.M. and Chacon-Nava, J. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. WEAR, 180 (1-2). pp. 91-99. ISSN 0043-1648

Heath, G. and Stack, Margaret and Rehberg, M. and Kammer, P. (1995) The erosion of functionally graded coatings under fluidized bed conditions. In: Proceedings of the 3rd International Symposium on Structural and Functional Gradient Materials. Presses Polytechniques et Universitaires Romandes, pp. 511-518. ISBN 288742900

Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M. (1995) Second order analysis of the inner shock structure. In: Asymptotic Modelling in Fluid Mechanics. Springer, Heidelberg, pp. 191-204. ISBN 3-540-59414-0

Jiang, Jiaren and Stott, F.H. and Stack, M.M. (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. WEAR, 176 (2). pp. 185-194. ISSN 0043-1648

Smith, A. and Abed, A. and Edrees, H.J. and Hendry, A. (1994) Ceramic-matrix composites of silicon-nitride with conducting particles. In: Silicon Nitride 93: proceedings of the international conference on silicon nitride-based ceramics, Stuttgart, October 4-6, 1993. Key Engineering Materials, 89-91 . Trans Tech Publications, Aedermannsdorf, Switzerland, pp. 423-428. ISBN 0-87849-668-8

Stack, Margaret (1993) The use of erosion-corrosion maps to characterize erosion-corrosion by slurries. In: Proceedings of the 1st International Symposium on Process Industry Piping. UNSPECIFIED, pp. 1-13.

STACK, M M and STOTT, F H and WOOD, G C (1993) The significance of velocity exponents in identifying erosion-corrosion mechanisms. Journal de Physique 4, 3 (C9). pp. 687-694. ISSN 1155-4339

Reese, Jason and Woods, L.C. and Thivet, F.J.P. and Candel, S.M. (1993) The inner shock structure determined from a modified frame-independent second-order kinetic theory. In: 19th International Symposium on Shock Waves, 1993-07-26 - 1993-07-30, Marsailles.

Stack, M.M. and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. WEAR, 162-164 (B). pp. 706-712. ISSN 0043-1648

NAVA, J G C and STOTT, F H and STACK, M M (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X

STACK, M M and STOTT, F H (1993) An approach to modelling erosion-corrosion of alloys using erosion-corrosion maps. Corrosion Science, 35 (5-8). pp. 1027-1034. ISSN 0010-938X

Stack, Margaret and Stott, F.H. (1993) Identification of transitions through erosion-corrosion regimes using erosion-corrosion maps. In: Advances in Materials and Processing Technologies. Trans Tech Publications Ltd, Dublin, pp. 2211-2218.

Stack, Margaret and Stott, F.H. and WOOD, G C (1993) Characterization of erosion-corrosion regimes using erosion-corrosion maps. Surface Engineering, 11. pp. 31-42. ISSN 0267-0844

Stack, Margaret and Stott, F.H. (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 182nd Fall Meeting of the Electrochemical Society. The Electrochemical Society. ISBN 978-1566770163

STACK, M M and STOTT, F H and WOOD, G C (1992) The effect of pre-oxidation of chromia and alumina forming alloys on erosion in laboratory simulated fluidized-bed conditions. Corrosion Science, 33 (6). pp. 965-983. ISSN 0010-938X

Stack, Margaret and Stott, F.H. (1992) Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures. In: Proceedings of the 7th Symposium on Oxide Films on Metals and Alloys. UNSPECIFIED, pp. 589-600. ISBN 978-9995538774

Stack, M.M. and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the effect of pre-oxidation in erosion-corrosion environments. Journal of Physics D: Applied Physics, 25 (1A). A170-A176. ISSN 0022-3727

Stack, Margaret and Stott, F.H. and WOOD, G C (1992) Computer simulation of the synergisic effects of erosion and corrosion. Key Engineering Materials, 72-74. pp. 31-47. ISSN 1013-9826

Stack, M.M. and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836

Stack, Margaret and Stott, F.H. and WOOD, G C (1991) Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments. In: Heat Resistant Materials. ASM International, Ohio, USA, pp. 333-342. ISBN 978-0871704290

Stack, Margaret and Stott, F.H. and WOOD, G C (1991) Erosion-corrosion mechanisms in fluidized bed environments : materials for combined cycle power plant. In: UNSPECIFIED.

Stott, F.H. and Tiong, K.K. and Stack, Margaret (1991) The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions. In: The European Corrosion Congress, EUROCORR 91, 1991-10-21 - 1991-10-25, Budapest.

STACK, M M and STOTT, F H and WOOD, G C (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409

Nicholls, J.R. and Stephenson, D. and Polden, M. and Norton, J.F. and Gandry, M. and Stott, F.H. and Prescott, R. and Stack, Margaret and Wouters, G. and Englen, W. and Debruyen, W. and Casteels, F. (1991) Modelling of erosion-corrosion processes in energy conversion systems : summary report. [Report]

Stott, F.H. and Stack, Margaret and Wood, G C (1991) The role of oxides in the erosion-corrosion of alloys in low velocity conditions. In: Corrosion-Erosion-Wear of Materials at Elevated Temperatures. National Association of Corrosion Engineers, NACE, Houston, Texas, Article 12, 1-16.

Tooth, A.S. and Nash, D.H. (1986) The use of a microcomputer in the design of cylindrical pressure-vessels. International Journal of Pressure Vessels and Piping, 24 (1). pp. 1-12. ISSN 0308-0161