Picture of blood cells

Open Access research which pushes advances in bionanotechnology

Strathprints makes available scholarly Open Access content by researchers in the Strathclyde Institute of Pharmacy & Biomedical Sciences (SIPBS) , based within the Faculty of Science.

SIPBS is a major research centre in Scotland focusing on 'new medicines', 'better medicines' and 'better use of medicines'. This includes the exploration of nanoparticles and nanomedicines within the wider research agenda of bionanotechnology, in which the tools of nanotechnology are applied to solve biological problems. At SIPBS multidisciplinary approaches are also pursued to improve bioscience understanding of novel therapeutic targets with the aim of developing therapeutic interventions and the investigation, development and manufacture of drug substances and products.

Explore the Open Access research of SIPBS. Or explore all of Strathclyde's Open Access research...

Items where department is "Faculty of Engineering > Design, Manufacture and Engineering Management"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Publication Date | Authors | Item type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 2125.

A

Air, A. and Wodehouse, A. (2019) 3DP benchmark model for evaluation of dimensional accuracy against a pre-existing product. In: 16th Conference on Rapid Design Prototyping and Manufacture (RDPM), 2019-04-04 - 2019-04-05, Brunel University.

Aletdinov, A. and Mironov, S. and Korznikova, G. F. and Konkova, T. and Zaripova, R. G. and Myshlyaev, M. M. and Lee Semiatin, S. L. (2019) Martensite-to-austenite reversion and recrystallization in cryogenically-rolled type 321 metastable austenitic steel. Metallurgical and Materials Transactions A, 50 (3). pp. 1346-1357. ISSN 1073-5623

Al-Amri, Abdullah and Wong, T. C. (2019) Challenges of total quality management in higher education institutions. In: Proceedings of the International Conference on Industrial Engineering and Operations ManagementBangkok, Thailand, March 5-7, 2019. IEOM Society International, [S.I.], pp. 1200-1201. ISBN 978-1-5323-5948-4

Aletdinov, Ainur and Mironov, S. and Korznikova, G. and Konkova, Tatyana and Zaripova, Rida and Myshlyaev, Michail and Lee Semiatin, S. (2019) EBSD investigation of microstructure evolution during cryogenic rolling of type 321 metastable austenitic steel. Materials Science and Engineering: A, 745. pp. 460-473. ISSN 0921-5093

Ali, Ibrahim Labaran and Hird, Abigail and Tanko, Muhammad and Whitfield, Robert Ian (2019) SME approach to road transportation risk management : evidence from Nigeria. In: WIT Transactions on The Built Environment. WIT Press, Southampton, pp. 39-47. ISBN 9781784663001

Allazadeh, Mohammad (2018) Analysing the effect of strain rate and temperature on the flow stress in AA1050 sheet using E-2448 standard. Journal of Multidisciplinary Engineering Science and Technology, 5 (11). pp. 9009-9015. ISSN 2458-9403

Abdalla, Fatin and Tuohy, Paul and Evans, Dorothy and Blackwell, Paul (2018) A review of integrated phase change materials for evacuated tube solar collector system. In: International Conference on Energy Research, 2018-10-31 - 2018-11-02.

Almandoz, Eluxka and Fuentes, Gonzalo G. and Fernández, José and Martinez de Bujanda, Javier and Rodríguez, Rafael J. and Pérez-Trujillo, Fco. Javier and Alcalá, Germán and Lousa, Arturo and Qin, Yi (2018) Chemical and mechanical stability of air annealed cathodic arc evaporated CrAlON coatings. Surface and Coatings Technology, 351. pp. 153-161. ISSN 0257-8972

Ali, Ibrahim Labaran and Hird, Abigail and Whitfield, Robert Ian (2018) Enhancing supply chain resilience through risk information sharing : a triadic perspective. In: 8th International Conference on Operations and Supply Chain Management, 2018-09-09 - 2018-09-12, Cranfield University.

Ali, Ibrahim Labaran and Hird, Abigail and Whitfield, Robert Ian (2018) Social relationships and supply chain risk information sharing. In: 25th International Annual EurOMA Conference, 2018-06-24 - 2018-06-27.

Anderson, Robert William and Acur, Nuran and Corney, Jonathan (2018) How do SMEs use open innovation when developing new business models? In: Researching Open Innovation In SMEs. World Scientific Publishing Co Pte Ltd, New Jersey, pp. 179-209. ISBN 9789813230965

Almandoz, Eluxka and Fernández de Ara, Jonathan and Martínez de Bujanda, Javier and Fernández Palacio, José and Rodríguez, Rafael José and Zhang, Zhenxue and Dong, Hanshan and Qin, Yi and Fuentes, Gonzalo García (2018) CrAlON CAE-PVD coatings for oxidation and wear protection of TZM alloys in FAST sintering applications. Materials Chemistry and Physics, 208. pp. 189-197. ISSN 0254-0584

Aletdinov, Ainur and Mironov, Sergey and Korznikova, Galia and Zaripova, Rida and Konkova, Tatyana and Myshlyaev, Michail (2017) EBSD анализ микроструктуры аустенитной стали после прокатки в криогенных условиях. Materials Physics and Mechanics, 33 (1). pp. 29-40. ISSN 1605-2730

Allazadeh, M. R. and Zuelli, N. (2017) Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming. AIP Conference Proceedings, 1896 (1). ISSN 0094-243X

Appleby, Andrew and Conway, Alastair and Ion, William (2017) A novel methodology for in-process monitoring of flow forming. AIP Conference Proceedings, 1896 (1). ISSN 0094-243X

Andrews, Colin and Broby, Daniel and Paul, Greig and Whitfield, Ian (2017) Utilising financial blockchain technologies in advanced manufacturing. [Report]

Allazadeh, Mohammad Reza (2017) Application of superplastic forming in manufacture four-sheet sandwich panel sheetstock. In: 4th International Conference on Manufacturing and Industrial Technologies, 2017-05-27 - 2017-05-29, University Lisbon.

Alavi, N. and Zampierin, S. and Komeili, M. and Cocuzza, S. and Debei, S. and Menon, C. (2017) A preliminary investigation into the design of pressure cushions and their potential applications for forearm robotic orthoses. BioMedical Engineering Online, 16 (1). ISSN 1475-925X

Allazadeh, Mohammad Reza and Zuelli, Nicola (2017) Metrology and microscopy analysis of multisheet packs manufactured via superplastic forming to study possible diffusion bonding. Procedia Engineering, 183. pp. 251-256. ISSN 1877-7058

Azeem, M.A. and Jones, N.G. and Raghunathan, S.L. and Vorontsov, V.A. and Dye, D. (2017) Functional stability of a ferromagnetic polycrystalline Ni2MnGa high temperature shape memory alloy. Scripta Materialia, 130. pp. 274-277. ISSN 1359-6462

Addepalli, Sri and Roy, Rajkumar and Axinte, Dragoş and Mehnen, Jörn (2017) 'In-situ' inspection technologies : trends in degradation assessment and associated technologies. Procedia CIRP, 59. pp. 35-40. ISSN 2212-8271

Arthington, Matthew R. and Cleaver, Christopher J. and Huang, Jianglin and Duncan, Stephen R. (2016) Curvature control in radial-axial ring rolling. IFAC-PapersOnLine, 49 (20). pp. 244-249. ISSN 1474-6670

Anusas, Michael and Harkness, Rachel (2016) Different presents in the making. In: Design Anthropological Futures. Bloomsbury Publishing PLC, London. ISBN 9781474280600

Annamalai Vasantha, Gokula and Ramesh, Hari Prakash and Sugavanam, Chandra Mouli and Chakrabarti, Amaresh and Corney, Jonathan and Wodehouse, Andrew (2016) Interactional differences and effects between collocated and distributed design. In: Research into Design for Communities, Volume 1. Springer, Singapore, pp. 933-944. ISBN 9789811035173 (In Press)

Annamalai Vasantha, Gokula Vijaykumar and Chakrabarti, Amaresh and Corney, Jonathan (2016) A knowledge flow model to capture unstructured product development processes. Knowledge and Process Management, 23 (2). pp. 91-109. ISSN 1092-4604

Annamalai Vasantha, Gokula Vijayumar and Corney, Jonathan and MacLachlan, Ross and Wodehouse, Andrew (2016) The analysis and presentation of patents to support engineering design. In: 7th International Conference on Design Computing and Cognition, 2016-06-27 - 2016-06-29.

AlKuaik, Khalid and Acur, Nuran and Mendibil, Kepa (2016) A study of the influence of network structural embeddedness on organization innovativeness. In: 23rd Innovation and Product Development Management Conference, 2016-06-12 - 2016-06-14, University of Strathclyde.

Anderson, Robert William and Acur Bakir, Nuran and Corney, Jonathan (2016) Working with the crowd in business model innovation : an SME approach. In: 23rd Innovation and Product Development Management Conference, 2016-06-12 - 2016-06-14, University of Strathclyde.

Allan, Michael and Thomas, Matthew and Brooks, Jeffery and Blackwell, Paul (2016) β Recrystallisation characteristics of α + β titanium alloys for aerospace applications. In: Proceedings of the 13th World Conference on Titanium. John Wiley & Sons Inc., New York, pp. 203-208. ISBN 9781119293668

Allwood, Julian M. and Childs, Tom H.C. and Clare, Adam T. and De Silva, Anjali K.M. and Dhokia, Vimal and Hutchings, Ian M. and Leach, Richard K. and Leal-Ayala, David R. and Lowth, Stewart and Majewski, Candice E. and Marzano, Adelaide and Mehnen, Jörn and Nassehi, Aydin and Ozturk, Erdem and Raffles, Mark H. and Roy, Raj and Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. 729–757. ISSN 0924-0136

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar and Corney, Jonathan Roy (2015) Advances in designing product-service systems. Journal of the Indian Institute of Science, 95 (4). pp. 429-448. ISSN 0019-4964

Annamalai Vasantha, Gokula Vijayumar and Jagadeesan, Ananda Prasanna and Corney, Jonathan Roy and Lynn, Andrew and Agarwal, Anupam (2015) Crowdsourcing solutions to 2D irregular strip packing problems from Internet workers. International Journal of Production Research, 54 (14). pp. 4104-4125. ISSN 0020-7543

Anusas, Michael and Ingold, Tim (2015) The charge against electricity. Cultural Anthropology, 30 (4). 540–554. ISSN 1548-1360

Anusas, Michael (2015) Unfolding the studio : a design anthropology of material emergence. In: Material Culture in Action: Practices of making, collecting and re-enacting art and design, 2015-09-07 - 2015-09-08, The Glasgow School of Art.

Annamalai Vasantha, Gokula and Acur, Nuran and Corney, Jonathan (2015) Assessment of rural digital imaging and creativity abilities for potential crowdsourcing case. In: The Continious Innovation Management Workshop, 2015-09-01 - 2015-09-02, Netherlands. (Unpublished)

Acur Bakir, Nuran and Mount, Matthew (2015) Exploring the implementation of the ambidextrous organization through collaborative crowdsourcing technology. In: 31st EGOS Colloquium, 2015-07-02 - 2015-07-04, ALBA Graduate Business School at The American College of Greece.

Alessi, Sabina and Di Filippo, Maria and Dispenza, Clelia and Focarete, Maria Letizia and Gualandi, Chiara and Palazzetti, Roberto and Pitarresi, Giuseppe and Zucchelli, Andrea (2015) Effects of nylon 6,6 nanofibrous mats on thermal properties and delamination behavior of high performance CFRP laminates. Polymer Composites, 36 (7). pp. 1303-1313. ISSN 0272-8397

Agarwal, Anupam and Yadav, Parmatma and Upadhyay, C. K. and Corney, Jonathan and Annamalai Vasantha, G. V. and Jagadeesan, A. P. and Lynn, A. (2015) A novel hybrid intelligence approach for 2D packing through Internet crowdsourcing. In: 2015 IEEE Conference on Technological Innovation in ICT for Agriculture and Rural Development, 2015-07-10 - 2015-07-12, India.

Annamalai Vasantha, Gokula Vijayumar and Ramesh, Hari Prakash and Sugavanam, Chandra Mouli and Chakrabarti, Amaresh and Corney, Jonathan (2015) Influences of integrating touch screen smart board and CAD in collaborative design. In: ICDC 2015 - Proceedings of the 3rd International Conference on Design Creativity. The Design Society, pp. 217-224. ISBN 9781904670605

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar and Corney, Jonathan (2014) Challenges and opportunities in transforming laser system industry to deliver integrated product and service offers. In: 15th IFIP Working Conference on Virtual Enterprises, 2014-10-06 - 2014-10-08, Hotel CASA 400.

Annamalai Vasantha, Gokula Vijayumar and Corney, Jonathan and Acur Bakir, Nuran and Lynn, Andrew and Jagadeesan, Ananda Prasanna and Smith, Marisa and Agarwal, Anupam (2014) Social implications of crowdsourcing in rural Scotland. International Journal of Social Science & Human Behavior Study, 1 (3). pp. 47-52.

Annamalai Vasantha, Gokula Vijayumar and Corney, Jonathan and Jagadeesan, Ananda Prasanna and Lynn, Andrew and Acur Bakir, Nuran and Smith, Marisa and Agrawal, Anupam (2014) Towards crowdsourcing spatial manufacturing tasks from rural India. In: 12th International Conference on Manufacturing Research, 2014-09-09 - 2014-09-11, Southampton Solent University.

Annamalai Vasantha, Gokula Vijayumar and Ramesh, Hari Prakash and Sugavanam, Chandra Mouli and Chakrabarti, Amaresh and Corney, Jonathan (2014) Usage of gestures along with other interaction modes in collaborative design. In: 12th International Conference on Manufacturing Research, 2014-09-09 - 2014-09-11, Southampton Solent University.

Anusas, Mike and Lucas, Ray (2014) Drawing parallels : lines of conversation in design and architecture. In: Sewing Lines, Growing Surfaces, Breathing Atmospheres: Towards an Ontogeny of Things, 2014-07-02 - 2014-07-03, Bauhaus University, IKKM.

Annamalai Vasantha, Gokula Vijayumar and Corney, Jonathan and Acur Bakir, Nuran and Lynn, Andrew and Jagadeesan, Ananda Prasanna and Smith, Marisa and Agarwal, Anupam (2014) Social implications of crowd sourcing in rural Scotland. In: International Conference on Advances in Social Science, Economics and Management Study - SEM 2014, 2014-06-01 - 2014-06-02, Cavendish Campus, University of Westminster.

Anusas, Mike (2014) Design : temporal questions. In: Temporal Design: An Interdisciplinary Workshop, 2014-05-28 - 2014-05-29, University of Edinburgh, Edinburgh College of Art.

Anusas, Mike and Harkness, Rachel (2014) Things could be different : design anthropology as hopeful, critical and ecological. In: Research Network for Design Anthropology: Ethnographies of the Possible, 2014-04-10 - 2014-04-11, Aarhus Universitet, Moesgård.

Arantes, Ariana Fernandes and Jabbour, Ana Beatriz Lopes de Sousa and Jabbour, Charbel José Chiappetta (2014) Adoção de práticas de green supply chain management : mecanismos de indução e a importância das empresas focais. Production, 24 (4). pp. 725-734. ISSN 1980-5411

Anusas, Mike and Ingold, Tim (2013) The electrical charge against infrastructure. In: 112th Annual Meeting American Anthropology Association (AAA), 2013-11-20 - 2013-11-24, Hilton Chicago.

Anusas, Mike and Ingold, Tim (2013) Designing environmental relations : from opacity to textility. Design Issues, 29 (4). pp. 58-69. ISSN 0747-9360

Amir, Muhammad and El Sayed, Tamer (2013) A phenomenological variational multiscale constitutive model for intergranular failure in nanocrystalline materials. Materials Letters, 107. pp. 56-59. ISSN 0167-577X

Alberdi, A. and Suárez, A. and Artaza, T. and Escobar-Palafox, G.A. and Ridgway, K. (2013) Composite cutting with abrasive water jet. Procedia Engineering, 63. pp. 421-429. ISSN 1877-7058

Annamalai Vasantha, Gokula Vijayumar and Komoto, Hitoshi and Evans, Steve and Hussain, Romana and Roy, Rajkumar and Tomiyama, Tetsuo and Tiwari, Ashutosh and Williams, Stewart (2013) A manufacturing framework for capability-based product-service systems design. Journal of Remanufacturing, 3. ISSN 2210-4690

Anusas, Mike (2013) Designing surfaces: from geometries of enclosure to textures of integration : from geometries of enclosure to textures of integration. In: International Union of Anthropological and Ethnological Sciences 2013: Evolving Humanity, Emerging Worlds, 2013-08-05 - 2013-08-10.

Anusas, Mike and Ingold, Tim (2013) Designing environmental relations : from opacity to textility. In: DRS OPENSiG Symposium. Good things and bad things: tricky objects, tricky people, tricky processes, 2013-06-10 - 2013-06-11, Nottingham Contemporary.

Acur Bakir, Nuran and Binti Mustaffa Bakry, Faridah and Mendibil, Kepa (2013) Knowledge resources, management innovation and radical innovation. In: 20th International Product Development Management Conference “re-enchanting technology”, 2013-06-23 - 2013-06-25.

Allazadeh, Mohammad R. and Marangoni, Roy D. and Lovell, Mike R. (2013) Liquid level sensor for high temperature molten salt in confined container. Frontiers in Sensors, 1 (2). pp. 27-37. ISSN 2327-7297

Anderson, Magnus and McGuire, Kenny and Zante, Remi Christophe and Ion, William and Rosochowski, Andrzej and Brooks, Jeffery (2013) Identifying the dominant failure mode in the hot extrusion tooling used to forge nickel based superalloy. Journal of Materials Processing Technology, 213 (1). 111–119. ISSN 0924-0136

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2013) Designers’ perception on information processes. In: The 4th International Conference on Research Into Design, Indian Institute of Technology, Chennai, 2013-01-06.

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Roy, Rajkumar and Corney, Jonathan (2013) Requirements for computer-aided product-service systems modeling and simulation. In: The 4th International Conference on Research Into Design, Indian Institute of Technology, Chennai, 2013-01-06.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh and Rout, Bijay Kumar and Corney, Jonathan (2013) Influences of design tools on the original and redesign processes. International Journal of Design Creativity and Innovation, 2 (1). pp. 20-50. ISSN 2165-0349

Ates, Aylin and Garengo, Patrizia and Cocca, Paola and Bititci, Umit (2013) The development of SME managerial practice for effective performance management. Journal of Small Business and Enterprise Development, 20 (1). pp. 28-54. ISSN 1462-6004

Allazadeh, M. R. and Itani, M. K. and Wosu, S. N. (2012) Compression of the material characteristics of steel, aluminum, wood and woven graphite epoxy composites in response to high strain rate load. Advances in Materials Science and Applications, 1 (1). pp. 13-30. ISSN 2306-9317

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Roy, Rajkumar and Erkoyuncu, John (2012) IPS2 design process : a comparative study between literature and industrial approaches. In: 4TH CIRP Conference on Industrial Product Service Systems, 2012-11-08 - 2012-11-09.

Allazadeh, M. R. (2012) Cooling rate optimization of as-cast consciously cast steel. Iranian Journal of Materials Science and Engineering, 9 (3). pp. 1-16. ISSN 1735-0808

Alinaghian, Leila and Ates, Aylin and Bititci, Umit and Harrington, Tomas and Srai, Jagjit and Talati, Rajan (2012) Drivers and barriers of continuous manufacturing in the pharmaceutical industry. In: 16th Cambridge International Manufacturing Symposium, 2012-09-20 - 2012-09-21.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh and Corney, Jonathan (2012) Influences of design tools on concepts generation. In: 2nd International Conference on Design Creativity (ICDC), 2012-09-18 - 2012-09-20.

Anusas, Mike (2012) Designing environmental relations : perception, form and experience. In: IAPS 2012 Human Experience in the Natural and Built Environment: Implications for Research Policy and Practice, 2012-06-24 - 2012-06-29.

Amir, Muhammad and El Sayed, Tamer (2012) Ultrasonic assisted manufacturing processes : variational model and numerical simulations. Ultrasonics, 52 (4). pp. 521-529. ISSN 0041-624X

Annamalai Vasantha, Gokula Vijayumar and Evans, Steve and Hussain, Romana and Cakkol, Mehmet and Roy, Rajkumar and Tiwari, Ashutosh (2012) A stakeholders’ integrated framework for designing product-service systems. In: 22nd CIRP International Design Conference, 2012-03-28 - 2012-03-31.

Allazadeh, Mohammad R. and Itani, Maher K. and Wosu, Sylvanus N. (2012) Characterization of compressive damage behavior of steel and aluminum. Journal of Materials Science Research, 1 (1). pp. 17-36. ISSN 1927-0593

Amir, Muhammad and El Sayed, Tamer (2012) A thermomechanical crystal plasticity based constitutive model for ultrasonic consolidation process. Computational Materials Science, 51. pp. 241-251. ISSN 0927-0256

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2012) Understanding collaborative activities for knowledge processes in Indian industry. In: Sustaining Innovation. Innovation, Technology and Knowledge Management . Springer, pp. 63-78. ISBN 978-1-4614-2076-7

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Roy, Rajkumar and Williams, Stewart and Lockett, Helen (2012) Servitization in laser job shops : interviews with laser job shops and machine providers. The Laser User (65). ISSN 1755-5140

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar and Lelah, Alan and Brissaud, Daniel (2012) A review of product-service systems design methodologies. Journal of Engineering Design, 23 (9). pp. 635-659. ISSN 0954-4828

Antony, Jiju and Bhuller, A S and Kumar, M and Mendibil, Kepa and Montgomery, D (2012) Application of Six Sigma DMAIC methodology in a transactional environment. International Journal of Quality and Reliability Management, 29 (1). pp. 31-53. ISSN 0265-671X (In Press)

Antony, Jiju and Gijo, E. V. and Childe, S.J. (2012) Case study in six sigma methadology : manufacturing quality improvement and guidence for managers. Production Planning and Control, 23 (8). pp. 624-640.

Antony, Jiju and Kumar, Maneesh (2012) Lean and Six Sigma methodologies in NHS Scotland : an empirical study and directions for future research. Quality Innovation Prosperity, 16 (2). pp. 19-34. ISSN 1338-984X

Arumugam, V. and Antony, Jiju and Douglas, Alex (2012) Observation : a lean tool for improving the effectiveness of Lean Six Sigma. TQM Journal, 24 (3). pp. 275-287. ISSN 1754-2731

Ates, Aylin and Acur Bakir, Nuran and Bititci, Umit (2012) Examining SME resilience in the context of global economic recession. In: 4th World Conference on Production & Operations Management, 2012-07-01 - 2012-07-05.

Anusas, Mike (2011) Reconnecting: reimagining design : reimagining design. In: Sensory Worlds, University of Edinburgh, 2011-12-07 - 2011-12-09.

Antony, J. and Coleman, S. and Montgomery, D. C. and Anderson, M. J. and Silvestrini, R. T. (2011) Design of experiments for non-manufacturing processes : benefits, challenges and some examples. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (11). pp. 2078-2087. ISSN 2041-2975

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Cakkol, Mehmet and Roy, Rajkumar and Evans, Steve and Tiwari, Ashutosh (2011) An ontology for product-service systems. In: 3rd CIRP International Conference on Industrial Product Service Systems, 2011-05-05 - 2011-05-06.

Amir, Muhammad and Arciniega, Roman and El Sayed, Tamer (2011) A variational void coalescence model for ductile metals. Computational Mechanics, 49 (2). pp. 185-195.

Amir, Muhammad and El Sayed, Tamer (2011) Acoustic softening in metals during ultrasonic assisted deformation via CP-FEM. Materials Letters, 65. pp. 356-359. ISSN 0167-577X

Amir, Muhammad and El Sayed, Tamer (2011) A Microscale Thermomechanical Constitutive Model for Ultrasonic Consolidation Processes. In: 11th US National Congress on Computational Mechanics (USNCCM-11), 2011-07-25.

Amir, Muhammad and Ghassemieh, Elaheh (2011) Computational modelling of fibre embedding in aluminium alloy (AA6061) during ultrasonic consolidation process. International Journal of Materials Engineering Innovation, 2. pp. 182-202. ISSN 1757-2754

Amir, Muhammad and Ghassemieh, Elaheh (2011) Fibre embedding in aluminium alloy 3003 using ultrasonic consolidation process - thermomechanical analyses. International Journal of Advanced Manufacturing Technology, 54 (9-12). pp. 182-202.

Amir, Muhammad and Ghassemieh, Elaheh (2011) Simulation of peel test of ultrasonic consolidated metal structures using cohesive model. In: 11th International Conference on the Science and Technology of Adhesion and Adhesives, 2011-09-07.

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Roy, Rajkumar and Tiwari, Ashutosh and Evans, Steve (2011) A framework for designing product-service systems. In: 18th International Conference on Engineering Design, ICED11,, 2011-08-15 - 2011-08-18.

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar (2011) Conceptual product-service system CAD - an application. In: Interdisciplinary design. KAIST, Republic of Korea. ISBN 9788989693291

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar and Cakkol, Mehmet (2011) Problem definition in designing product service systems. In: Functional thinking for value creation. Springer Berlin Heidelberg, Berlin, pp. 105-110. ISBN 9783642196881

Antony, Jiju (2011) Six Sigma vs Lean : some perspectives from leading academics and practitioners. International Journal of Productivity and Performance Management, 60 (2). pp. 185-190. ISSN 1741-0401

Ates, Aylin and Assarlind, M and Maguire, Catherine and Bititci, Umit and MacBryde, Jillian (2011) Enabling factors of adaptive capability in small and medium enterprises. In: 18th International Annual EurOMA Conference, 2011-07-03 - 2011-07-06.

Ates, Aylin and Bititci, U. (2011) Change process : a key enabler to building resilient SMEs. International Journal of Production Research, 49 (18). pp. 5601-5618. ISSN 0020-7543

Abid, M and Qarni, M J (2010) Numerical investigation of residual stresses and distortions due to multi-pass welding in a pipe-flange joint. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (1). pp. 253-267. ISSN 0954-4089

Acur, Nuran and Kandemir, Destan and de Weerd-Nederhof, Petra and Song, Michael (2010) Exploring the impact of technological competence development on speed and NPD program performance. Journal of Product Innovation Management, 27 (6). 915–929. ISSN 0737-6782

Antony, J. and Snee, Ronald D., Snee Associates (2010) Leading role. ASQ Six Sigma Forum Magazine, 9 (3). ISSN 1539-4069

Acharya, U. H. and Gijo, E. V. and Antony, J. (2010) Quality engineering of a traction alternator by robust design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (2). pp. 297-304. ISSN 2041-2975

Amir, Muhammad and El Sayed, Tamer (2010) Modeling of acoustic softening effects in metals using crystal plasticity theor - a micromechanics based model. In: 20th International Workshop on Computational Mechanics of Materials, 2010-09-08.

Amir, Muhammad and Schmauder, Siegfried (2010) Multiscale simulation of metal/ceramic interface fracture. In: IUTAM Symposium on Multi-Functional Material Structures and Systems. IUTAM Bookseries, 19 (VII). Springer.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2010) Assessment of design tools for knowledge capture and reuse. In: Modelling and management of engineering processes. Springer London, London, pp. 139-150. ISBN 9781849961981

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Lockett, Helen and Alcock, Jeffrey and kingston, Jennifer (2010) ISIR : informed sensitised intelligent response - a PSS conceptual design framework using service characteristics. In: APMS 2010 International Conference: Competitive and Sustainable Manufacturing, Products and Services., 2010-10-11 - 2010-10-13.

Annamalai Vasantha, Gokula Vijayumar and Roy, Rajkumar (2010) Challenges in product service systems design. In: 8th International Conference on Manufacturing Research ICMR 2010, 2010-09-14.

Antony, Jiju and Laureani, Alessandro (2010) Reducing employees' turnover in transactional services : a Lean Six Sigma case study. International Journal of Productivity and Performance Management, 59 (7). pp. 688-700. ISSN 1741-0401

Abid, Muhammad and Qarni, Muhammad Jawad (2009) 3D thermal finite element analysis of single pass girth welded low carbon steel pipe-flange joints. Turkish Journal of Engineering and Environmental Sciences, 33. pp. 281-293. ISSN 1300-0160

Arslan, Tughrul and Yang, Erfu and Haridas, Nakul and Morales, Alicia and El-Rayis, Ahmed O. and Erdogan, Ahmet T. and Stoica, Adrian (2009) An adaptive approach to space-based picosatellite sensor networks. In: Evolutionary and Bio-Inspired Computation. Proceedings of SPIE . SPIE Press, Bellingham, Washington. ISBN 9780819476135

Ates, Aylin and Bititci, Umit (2009) Strategy dynamics in small to medium-sized enterprises : Evidence from UK manufacturing SMEs. In: 16th International European Operations Management Association Conference, 2009-06-14 - 2009-06-17.

Amir, Muhammad and Ghassemieh, Elaheh (2009) Theoretical and FE analysis of ultrasonic welding of aluminium alloy 3003. Journal of Manufacturing Science and Engineering, 131 (4). ISSN 1528-8935

Amir, Muhammad and Ghassemieh, Elaheh (2009) Ultrasonic welding in implanting reinforcing fibre in aluminum matrices. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08.

Antony, Jiju (2009) Six Sigma vs TQM. International Journal of Productivity and Performance Management, 58 (3). pp. 274-279. ISSN 1741-0401

Amir, Muhammad and Ghassemieh, Elaheh (2008) Thermomechanical analyses of ultrasonic welding process using thermal and acoustic softening effects. Mechanics of Materials, 40 (12). pp. 982-1000.

Ates, Aylin and Bititci, Umit (2008) Strategy processes and managerial activities unfolding strategic initiatives : an evaluation of theory vs. practice in production SMEs. In: British Academy of Management Conference 2008, 2008-09-09 - 2008-09-11.

Ates, Aylin (2008) Strategy process in manufacturing SMEs (Small Medium Enterprises). PhD thesis, UNSPECIFIED.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2008) Understanding the knowledge needs of designers during design process in industry. Journal of Computing and Information Science in Engineering, 8 (1). ISSN 1530-9827

Amir, Muhammad and Ghassemieh, Elaheh (2008) Modelling and characterization of ultrasonic consolidation process on aluminium alloys. In: MRS Spring Meeting 2008, 2008-04-01.

Amir, Muhammad and Ghassemieh, Elaheh (2008) Simulation of ultrasonic welding of fibre elements in metal matrices. In: 8th World congress on computational mechanics / 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, 2008-06-30 - 2008-07-04.

Amir, Muhammad and Ghassemieh, Elaheh (2008) Ultrasonic consolidation as a novel manufacturing technique in embedding passive/active fibres in metal matrices. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05.

Amir, Muhammad and Ghassemieh, Elaheh (2008) Ultrasonic consolidation of passive/active fibres in aluminium alloy: a finite element approach. In: MRS IMRC 2008, 2008-06-09.

Amir, Muhammad and Schmauder, Siegfried (2008) Crystal plasticity and failure at metal/ceramic interfaces: from nano to macro. In: 2008 TMS Annual Meeting and Exhibition, 2008-03-09.

Amir, Muhammad and Schmauder, Siegfried (2008) Crystal plasticity modelling of metal/ceramic interface fracture based on atomistic input data. In: International Symposium on Computational Mechanics of Polycrystals, 2008-02-25.

Amir, Muhammad and Schmauder, Siegfried (2008) Multiscale modelling of interface fracture. In: IUTAM Symposium on Modelling Nanomaterials and Nanosystems, 2008-05-19.

Amir, Muhammad and Schmauder, Siegfried and Ruehle, Manfred (2008) Niobium/alumina bicrystal interface fracture: a theoretical interlink between local adhesion capacit and macroscopic fracture energies. Engineering Fracture Mechanics, 75. pp. 2320-2332. ISSN 0013-7944

Antony, Jiju (2008) Can six sigma be effectively implemented in SMEs? TQM Magazine, 57 (5). pp. 420-423. ISSN 0954-478X

Antony, Jiju (2008) What is the role of academic institutions for the future development of Six Sigma? International Journal of Productivity and Performance Management, 57 (1). pp. 107-110. ISSN 1741-0401

Antony, Jiju and Kumar, Maneesh and Labib, A (2008) Gearing six sigma into UK manufacturing SMEs. Journal of the Operational Research Society, 59. pp. 482-493. ISSN 0160-5682

Ates, Aylin and Altin-Gumussoy, C. and Davis, Katherine and Oktay-Firat, U and Bititci, Umit (2008) Organisational change processes, managerial activities, and a comparative study in European context. In: British Academy of Management Conference 2008, 2008-09-09 - 2008-09-11.

Ates, Aylin and Bititci, Umit (2008) Fundamental concepts in management research and ensuring research quality : focusing on case study method. In: European Academy of Management Annual Conference, 2008, 2008-05-14 - 2008-05-17.

Azushima, A. and Kopp, R. and Korhonen, A. and Yang, D.Y. and Micari, F. and Lahoti, G.D. and Groche, P. and Yanagimoto, J. and Tsuji, N. and Rosochowski, A. and Yanagida, A. (2008) Severe plastic deformation (SPD) processes for metals. CIRP Annals - Manufacturing Technology, 57 (2). pp. 716-735. ISSN 0007-8506

Amir, Muhammad and Schmauder, Siegfried (2007) Fracture of bicrystal metal/ceramic (Nb/Sapphire) interfaces : a study via the crystal plasticity theory and cohesive modeling approach. In: 16th International Workshop on Computational Mechanics of Materials, 2006-09-25 - 2006-09-26.

Albores, Pavel and Ball, Peter D. and MacBryde, Jillian C. (2007) Modelling e-business processes: a component-based simulation approach. International Journal of Agile Systems and Management, 2 (3). pp. 242-262. ISSN 1741-9174

Amir, Muhammad and Ghassemieh, Elaheh (2007) Ultrasonic welding process : thermomechanical analyses based on a temperature dependent material model and a kinematic friction model. In: Applied Mechanics and Materials Conference (McMAT 2007), 2007-06-03 - 2007-06-07.

Amir, Muhammad and Schmauder, Siegfried (2007) Crystal plasticity effects of metal/ceramic interface fracture. In: 9th US National Congress on Computational Mechanics, 2007-07-22. (Unpublished)

Amir, Muhammad and Schmauder, Siegfried (2007) Shear at metal/ceramic interfaces during deformation and fracture. In: Shear 2007 - International symposium on shear behaviour and mechanisms in materials plasticity, 2012-07-20. (Unpublished)

Amir, Muhammad and Schmauder, Siegfried and Huang, Yonngang (2007) Fracture of bicrystal metal/ceramic interfaces : a study via the mechanism-based strain gradient crystal plasticity theory. International Journal of Plasticity, 23 (4). pp. 665-689. ISSN 0749-6419

Anderson, Anthony and Sanford, Alison and Thomson, Avril and Ion, William (2007) Computer-supported and face-to-face collaboration on design tasks. Discourse Processes, 43 (3). pp. 201-228. ISSN 0163-853X

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2007) Taxonomy for understanding knowledge captured in documents by designers. In: Proceedings of the International Conference on Engineering Design 2007. The Design Society, pp. 433-434. ISBN 1-904670-02-4

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2007) Understanding patterns of interactions between designers during design process. In: Proceedings of the International Conference on Engineering Design. The Design Society, pp. 503-504. ISBN 1-904670-02-4

Antony, Jiju (2007) Determining the essential characetristics of Six Sigma Black Belts. TQM Magazine, 19 (3). pp. 274-281. ISSN 0954-478X

Antony, Jiju (2007) Development of an experiment-based robust design paradigm for multiple quality characteristics using physical programming. International Journal of Advanced Manufacturing Technology, 35 (11-12). pp. 1100-1112.

Antony, Jiju (2007) Winning customer loyalty in an automotive company through Six Sigma: a case study. Quality and Reliability Engineering International, 23 (7). pp. 849-866. ISSN 0748-8017

Arslan, T. and Haridas, N. and Yang, E. and Erdogan, A. T. and Barton, N. and Walton, A. J. and Thompson, J. S. and Stoica, A. and Vladimirova, T. and McDonald-Maier, K. D. and Howells, W. G J (2006) ESPACENET : A framework of evolvable and reconfigurable sensor networks for aerospace-based monitoring and diagnostics. In: First NASA/ESA Conference on Adaptive Hardware and Systems. IEEE, pp. 323-329. ISBN 0-7695-2614-4

Anusas, M. (2006) Attachments to nature : design and eco-emotion. In: Proceedings from the 5th Conference on Design and Emotion 2006. UNSPECIFIED. ISBN 91-975079-5-4

Anusas, M. (2006) Creativity in Mass-Education Contexts. In: 4th Engineering and product design education international conference, 2006-09-06 - 2006-09-08.

Amir, Muhammad and Schmauder, Siegfried (2006) Interface fracture analses of a bicrystal specimen using cohesive modelling approach. Modelling and Simulation in Materials Science and Engineering, 14 (6). pp. 1015-1030. ISSN 0965-0393

Amir, Muhammad and Schmauder, Siegfried and Ruehle, Manfred (2006) Modelling of crystal plasticity effects in the fracture of metal/ceramic interfaces : bridging the length scales. PhD thesis, UNSPECIFIED.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh (2006) Understanding of knowledge generation during design process in industry. In: Proceedings of the International Conference on Product Lifecycle Management PLM'06. Inderscience, Olney, pp. 96-110.

Antony, Jiju (2006) Implementing the Lean Sigma Framework in an Indian SME: a case study. Production Planning and Control, 17 (4). pp. 407-423.

Anusas, M. (2006) Experiences of Ecological Emotion. In: engage - designing for emotion international knowledge base and network, 2006-11-02.

Amir, Muhammad and Schmauder, Siegfried (2005) Crystal orientation effects on the crack initiation energies of a bimaterial interface (Nb/Al2O3). In: 15th International Workshop on Computational Mechanics of Materials (IWCMM 15), 2005-09-19 - 2005-09-20.

Amir, Muhammad and Schmauder, Siegfried (2005) Crystal orientation effects on the fracture energies of a bimaterial interface. In: Conference on Mechanics and Materials McMat 2005, 2005-06-01 - 2005-06-03.

Albores-Barajas, Pavel A. and Ball, Peter D. and MacBryde, Jillian C. (2005) Simulation process templates for E-business modelling. International Journal of Simulation and Process Modelling, 1 (3-4). pp. 150-160. ISSN 1740-2123

Antony, Jiju (2005) An application of Six Sigma to reduce waste. Quality and Reliability Engineering International, 21 (6). pp. 553-570. ISSN 0748-8017

Antony, J. and Banuelas, R. (2004) Modified analytic hierarchy process to incorporate uncertainty and managerial aspects. International Journal of Production Research, 42 (18). pp. 3851-3872. ISSN 0020-7543

Acur, N. and Bititci, U. (2003) Managing strategy through business process. Production Planning and Control, 14 (4). pp. 309-326. ISSN 0953-7287

Adams, Simon (2003) The Armada Correspondence in Cotton MSS Otho E VII and E IX. In: The Naval Miscellany. Navy Records Society cxlvi /Ashgate, pp. 37-92. ISBN 0-7546-3831-6

Albores-Barajas, P.A. and Ball, P.D. and MacBryde, J.C. and Bititci, U.S. (2003) A comparative study of the simulation analysis of e-business implementation in manufacturing companies. In: Collaborative Systems for Production Management. Springer Netherlands, pp. 359-374. ISBN 978-1-4020-7542-1

Antony, Jiju (2003) Implementing evaluation of the measurement process in an automotive manufacturer: a case study. Quality and Reliability Engineering International, 19 (5). pp. 397-410. ISSN 0748-8017

Albores-Barajas, P.A. and Ball, P.D. and MacBryde, J.C. IEEE, IEEE, IEEE, IEEE (2002) Generic business process models for e-business in manufacturing companies: is simulation useful? In: Engineering Management Conference 2002. IEEE, pp. 685-690. ISBN 0-7803-7385-5

Antony, Jiju (2002) Training for design of experiments using a catapult. Quality and Reliability Engineering International, 18 (1). pp. 29-35. ISSN 0748-8017

Acur Bakir, Nuran and Bititci, Umit (2001) PROPHESY - the strategy management process : a case study. In: IFIP Working Conference on Strategic Manufacturing, 2001-08-26 - 2001-08-29.

Antony, J. (2001) Improving the manufacturing process quality using experimental design techniques: a case study. International Journal of Operations and Production Management, 21 (5/6). pp. 812-822. ISSN 0144-3577

Andreasean, M.M. and Duffy, A.H.B. and MacCallum, K.J. and Bowen, J. and Storm, T. (1996) The design co-ordination framework : key elements for effective product development. In: 1st International Engineering Design Debate, 1996-09-23 - 1996-09-24.

Anderson, J.M. and Stimson, W.H. and Gettinby, G. (1980) The importance of statistical evaluation and experimental-design in the interpretation of data from cancer microdetector studies. European Journal of Cancer, 16 (7). pp. 965-967. ISSN 0959-8049

Anderson, J.M. and Grant, J.K. and Gettinby, G. (1979) Melphalan and urinary estrogens. British Journal of Cancer, 40 (2). pp. 314-315. ISSN 1532-1827

Anderson, J.M. and Jhunjhunwala, S.K. and Ewan, J.M. and Stimson, W.H. and Gettinby, G. (1979) Comparison of PAM and CEA as detectors of mammary micrometastases. British Journal of Cancer, 40 (2). p. 320. ISSN 1532-1827

Anderson, J.M. and Stimson, W.H. and Gettinby, G. and Jhunjhunwala, S.K. and Burt, R.W. (1979) Detection of mammary micrometastases by pregnancy-associated alpha-2-glycoprotein (pag,alpha-2-pag or pam) and carcinoembryonic antigen (cea). European Journal of Cancer, 15 (5). pp. 709-714. ISSN 0959-8049

Anderson, J.M. and Algie, T. and Grant, J.K. and Gettinby, G. (1978) Melphalan and steroid-hormones. British Journal of Cancer, 37 (3). pp. 477-478. ISSN 1532-1827

Anderson, J.M. and Algie, T. and Grant, J.K. and Gettinby, G. (1977) Hormones and adjuvant chemotherapy in breast-cancer. Lancet, 1 (8025). p. 1307. ISSN 0140-6736

Anderson, J.M. and Kelly, F. and Gettinby, G. and Wood, S.E. (1977) Prolonged survival after immunotherapy (irradiated cancer autografts) for mammary cancers, assessed by a measure of therapeutic deficiency. Cancer, 40 (1). pp. 30-35. ISSN 0008-543X

B

Brisco, Ross and Whitfield, Robert Ian and Grierson, Hilary and Bohemia, Erik (2019) Overcoming the challenges of global collaboration through design education. In: Proceedings of the 21st International Conference on Engineering and Product Design Education. The Design Society, Glasgow. (In Press)

Baker, T. N. and Rahimi, S. and Wei, B. and He, K. and McPherson, N. A. (2019) Evolution of microstructure during double-sided friction stir welding of microalloyed steel. Metallurgical and Materials Transactions A, 50 (6). 2748–2764. ISSN 1073-5623

Bolbot, Victor and Trivyza, Nikoletta and Theotokatos, Gerasimos and Boulougouris, Evangelos and Rentizelas, Athanasios and Vassalos, Dracos (2019) Cruise ship optimal power plants design identification and quantitative safety assessment. In: Proceedings of MOSES 2019 2nd International Conference on Modelling and Optimisation of Ship Energy Systems. University of Strathclyde, Glasgow, pp. 55-63. ISBN 9781909522510

Bovand, D. and Allazadeh, M. R. and Yousefpour, M. and Rasouli, S. (2018) Suggesting a full two level experimental factorial model with three factors to optimize Ti-HA biocomposite properties. Journal of Multidisciplinary Engineering Science and Technology, 5 (12). pp. 9252-9258. ISSN 2458-9403

Bell, Colin and Dixon, Caleb and Blood, Bob and Corney, Jonathan and Savings, David and Jump, Ellen and Zuelli, Nicola (2018) Enabling sheet hydroforming to produce smaller radii on aerospace nickel alloys. International Journal of Material Forming. ISSN 1960-6206

Brady, Scott and Yan, Xiu T. (2018) An engineering design tool capable of nurturing the development of new mechatronic actuators. In: Mechatronics 2018 : Reinventing Mechatronics, 2018-09-19 - 2018-09-21, Technology & Innovation Centre, University of Strathclyde.

Brisco, Ross and Whitfield, Robert and Grierson, Hilary (2018) Are social network sites the future of engineering design education? In: 20th International Conference on Engineering and Product Design Education, 2018-09-06 - 2018-09-07, Dyson School of Design Engineering, Imperial College London.

Bovand, Davood and Allazadeh, Mohammad Reza and Rasouli, Susan and Khodadad, Erfan and Borhani, Ehsan (2018) Studying the effect of hydroxyapatite particles in osteoconductivity of Ti-HA bioceramic. Journal of the Australian Ceramic Society. ISSN 2510-1579

Balzan, E. and Farrugia, P. and Casha, O. and Wodehouse, A. (2018) Evaluating the impact of design affordances in preschool children's toy preferences. In: Proceedings of the DESIGN 2018 15th International Design Conference. University of Zagreb, Croatia, pp. 2165-2176. ISBN 9789537738594

Brisco, R. and Whitfield, R. I. and Grierson, H. (2018) Modelling the relationship between design activity and computer-supported collaborative design factors. In: International Design Conference - Design 2018. The Design Society, Glasgow, pp. 193-204.

Benghalia, G. and Rahimi, S. and Wood, J. and Coules, H. and Paddea, S. (2018) Multiscale measurements of residual stress in a low alloy carbon steel weld clad with IN625 superalloy. Materials Performance and Characterization, 7 (4). ISSN 2165-3992

Bylya, Olga I. and Khismatullin, Timur and Blackwell, Paul and Vasin, Rodolf A. (2018) The effect of elasto-plastic properties of materials on their formability by flow forming. Journal of Materials Processing Technology, 252. pp. 34-44. ISSN 0924-0136

Bylja, Olga and Gomez-Gallegos, Ares and Stefani, Nicola and Blackwell, Paul (2017) Al-Li alloys – the analysis of material behaviour during industrial hot forging. Procedia Engineering, 207. pp. 7-12. ISSN 1877-7058

Bylya, O. I. and Ward, M. and Krishnamurty, B. and Tamang, S. and Vasin, R. A. (2017) Modelling challenges for incremental bulk processes despite advances in simulation technology : example issues and approaches. Procedia Engineering, 207. pp. 2358-2363. ISSN 1877-7058

Bell, Colin and Jump, Ellen and Kerr, William and Corney, Jonathan and Zuelli, Nicola and Savings, David (2017) Correlation between von Mises strain and material thinning in a hydroformed sample of Ti35A aerospace grade titanium. In: Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. AIP Conference Proceedings, 1896 . American Institute of Physics Inc., [Melville, New York]. ISBN 9780735415805

Brady, Scott P. and Yan, Xiu T. (2017) Lightweight means of actuation for use in space-based robotics applications. In: 68th International Astronautical Congress (IAC), 2017-09-25 - 2017-09-29. (In Press)

Brisco, Ross and Howell, Bryan and Whitfield, Robert and Thomson, Avril and Evans, Dorothy and Ion, William (2017) Workshop session : collaborative design education. In: ICED17, 21st International Conference on Engineering Design, 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Bylja, Olga and Reshetov, Aleksey and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2017) Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys. Procedia Engineering. ISSN 1877-7058 (In Press)

Brugo, T. and Minak, G. and Zucchelli, A. and Yan, X.T. and Belcari, J. and Saghafi, H. and Palazzetti, R. (2017) Study on Mode I fatigue behaviour of Nylon 6,6 nanoreinforced CFRP laminates. Composite Structures, 164. pp. 51-57. ISSN 0263-8223

Baines, Tim and Ziaee Bigdeli, Ali and Bustinza, Oscar F. and Shi, Victor Guang and Baldwin, James and Ridgway, Keith (2017) Servitization : revisiting the state-of-the-art and research priorities. International Journal of Operations and Production Management, 37 (2). pp. 256-278. ISSN 0144-3577

Brisco, Ross and Whitfield, Robert and Grierson, Hilary (2017) The use of social network sites in a global engineering design project. In: Proceedings of the 21th International Conference on Engineering Design (ICED 17). ICED, 9 . The Design Society, Glasgow, pp. 59-68.

Bufardi, Ahmed and Akten, Olcay and Arif, Muhammad and Xirouchakis, Paul and Perez, Roberto (2017) Towards zero-defect manufacturing with a combined online - offline fuzzy-nets approach in wire electrical discharge machining. WSEAS Transactions on Environment and Development, 13. pp. 401-409. ISSN 1790-5079

Bufardi, Ahmed and Akten, Olcay and Arif, Muhammad and Xirouchakis, Paul and Perez, Roberto (2017) A multiple-input multiple-output (MIMO) fuzzy nets framework for part quality prediction and planning. WSEAS Transactions on Systems, 16. pp. 242-253. ISSN 2224-2678

Benghalia, Gladys and Rahimi, Salah and Wood, James (2016) Measurements of surface and near-surface residual stress in 4330 low alloy carbon steel weld clad components. In: Residual Stresses 2016. Materials Research Forum, [Millersville, PA], pp. 259-264. ISBN 978-1-94529116-6

Brugo, T. and Palazzetti, R. (2016) The effect of thickness of Nylon 6,6 nanofibrous mat on Modes I-II fracture mechanics of UD and woven composite laminates. Composite Structures, 154. pp. 172-178. ISSN 0263-8223

Brisco, Ross and Whitfield, Ian and Evans, Dorothy and Fahnenmüller, Lennart (2016) Workshop session : How can social network sites support collaboration within product design education? In: 18th International Conference on Engineering and Product Design Education, 2016-09-08 - 2016-09-09.

Bakir, Caner and Acur, Nuran (2016) Greenfield investments and acquisitions of Turkish multinationals : trends, motivations and strategies. In: Emerging Market Multinationals in Europe. Routledge, London, pp. 129-156. ISBN 9781138920187

Brugo, T. and Minak, G. and Zucchelli, A. and Yan, X. T. and Saghafi, H. and Fotouhi, M. and Palazzetti, R. (2016) A study on fatigue behavior of nanointerleaved woven CFRP. In: European Conference on Composite Materials - ECCM 17, 2016-06-26 - 2016-06-30.

Bamoallem, Banan S. and Wodehouse, Andrew J. (2016) The role of the vocal stream in telepresence communication. In: PETRA'16. ACM, New York. ISBN 9781450343374

Bai, Q. and Mohamed, M. and Shi, Z. and Lin, J. and Dean, T. (2016) Application of a continuum damage mechanics (CDM)-based model for predicting formability of warm formed aluminium alloy. International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768

Bell, Colin and Tamimi, Saeed and Corney, Jonathan and Savings, David and Zuelli, Nicola (2016) Research directions in hydroforming technology. In: 19th International ESAFORM Conference on Material Forming – ESAFORM 2016, 2016-04-27 - 2016-04-29, Nantes Congress Center.

Brugo, T. and Palazzetti, R. and Ciric-Kostic, S. and Yan, X. T. and Minak, G. and Zucchelli, A. (2016) Fracture mechanics of laser sintered cracked polyamide for a new method to induce cracks by additive manufacturing. Polymer Testing, 50. pp. 301-308. ISSN 0142-9418

Benghalia, G. and Wood, J. (2016) Material and residual stress considerations associated with the autofrettage of weld clad components. International Journal of Pressure Vessels and Piping, 139-140. pp. 146-158. ISSN 0308-0161

Bamoallem, Banan S. and Wodehouse, Andrew J. and Mair, Gordon M. and Annamalai Vasantha, Gokula Vijayumar (2016) The impact of head movements on user involvement in mediated interaction. Computers in Human Behaviour, 55. pp. 424-431. ISSN 0747-5632

Bylya, O.I. and Vasin, R.A. and Blackwell, P.L. (2016) The mechanics of superplastic forming : how to incorporate and model superplastic and superplastic-like conditions. In: Materials Science Forum. Materials Science Forum, 838-839 . Trans Tech Publications Ltd, Switzerland, pp. 468-475. ISBN 9783038356721

Brisco, Ross and Whitfield, Robert and Grierson, Hilary (2016) Recommendations for the use of social network sites and mobile devices in a collaborative engineering design project. In: Proceedings of the 18th International Conference on Engineering and Product Design Education. Institution of Engineering Designers, The Design Society, Wiltshire, pp. 394-399. ISBN 9781904670780

Benghalia, G. and Wood, J. (2015) Autofrettage of weld clad components. Procedia Engineering, 130 (2015). pp. 453-465. ISSN 1877-7058

Bylya, O.I. and Sarangi, M.K. and Rohit, N. and Nayak, A. and Vasin, R.A. and Blackwell, P.L. (2015) Simulation of the material softening during hot metal forming. Archives of Metallurgy and Materials, 60 (3A). pp. 1887-1893. ISSN 2300-1909

Bell, Colin and Corney, Jonathan and Storr, John (2015) Assessing the potential benefits of manufacturing gas turbine components by utilizing hydroforming technology. In: 13th International Cold Forming Congress, 2015-09-02 - 2015-09-04, Glasgow.

Bell, Colin and Corney, Jonathan and Storr, John (2015) Assessing the potential benefits of manufacturing gas turbine components by utilizing hydroforming technology. In: 13th International Cold Forming Congress. University of Strathclyde Publishing, pp. 46-53. ISBN 978-1-909522-12-1

Blackwell, Paul (2015) From materials characterisation to pre-production validation : from materials characterisation to pre-production validations to providing processing solutions to industry. In: International Conference on New Forming Technology, 2012-08-27 - 2012-08-29.

Bylya, O. I. and Vasin, R. A. and Pshenichnyuk, A. I. (2014) An approach for modeling the active transformation of microstructure of two-phase Alloys in FEM simulation of technological chains in superplastic forming (SPF). Materialwissenschaft und Werkstofftechnik, 45 (9). pp. 799-806. ISSN 0933-5137

Bagherian, Ehsaan Reza and Bell, Colin and Cooper, Mervyn and Fan, Yongchang and Frame, Brian and Abdolvand, Amin (2014) Influence of casting speed on the structure and mechanical properties of continuous cast dhp copper tube. In: 23rd International Conference on Metallurgy and Materials, 2014-05-21 - 2014-05-23, Hotel Voronez I.

Bamoallem, B. S. and Wodehouse, A. J. and Mair, Gordon (2014) Design for an optimal social presence experience when using telepresence robots. In: 13th International Design Conference (Design 2014), 2014-05-19 - 2014-05-22, Croatia.

Bylja, O.I. and Pradhan, B.K. and Yakushina, E.B. and Blackwell, P.L. and Vasin, R.A. (2014) Modelling of active transformation of microstructure of two-phase Ti alloys during hot working. Letters on Materials, 4 (2). pp. 124-129. ISSN 2410-3535

Bylya, Olga and Sarangi, M K and Ovchinnikova, N V and Vasin, R A and Yakushina, E B and Blackwell, P L (2014) FEM Simulation of microstructure refinement during severe deformation. IOP Conference Series: Materials Science and Engineering, 63. ISSN 1757-899X

Bagherian, Ehsaan Reza and Bell, Colin and Cooper, Mervyn and Fan, Yong Chang and Frame, Brian and Rose, Mervyn (2013) Analysis and quantification of grain size of various DHP copper tubes manufacturing processes. Advanced Materials Research, 856. pp. 241-245. ISSN 1022-6680

Baldwin, James Scott and Rose-Anderssen, Christen and Ridgway, Keith and Boettinger, Fabian and Michen, Marcus and Agyapong-Kodua, Kwabena and Brencsics, Ivan and Nemeth, Istvan and Krain, Roland (2013) The evolution of manufacturing SPECIES. Procedia CIRP, 7. pp. 187-192. ISSN 2212-8271

Bititci, U. and Firat, S.U.O. and Garengo, P. (2013) How to compare performances of firms operating in different sectors? Production Planning and Control, 24 (12). pp. 1-18. ISSN 0953-7287

Boyle, Iain and Duffy, Alexander and Whitfield, Robert and Liu, Shaofeng (2012) The impact of resources on decision making. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26 (Specia). pp. 407-423. ISSN 0890-0604

Bititci, Umit and Garengo, Patrizia and Dörfler, Viktor and Nudurupati, Sai (2012) Performance measurement : challenges for tomorrow. International Journal of Management Reviews, 14 (3). 305–327. ISSN 1460-8545

Bititci, Umit and Van Der Meer, Robert and Noordin, Nora (2012) The adoption of E-collaboration technology in decision-making process and development of inter-organizational trust : a case study in service supply chain. In: 4th World Conference on Production & Operations Management, 2012-07-01 - 2012-07-05.

Brooks, Jeffery (2012) Friction during precision forging of high temperature aerospace materials. Materials Science and Technology, 28 (5). pp. 528-531. ISSN 0267-0836

Bailey, Jordan and Sahani, Shailja and Post, Mark and Lee, Regina and Daly, Michael (2012) York University Rover Team : space education beyond the classroom, developing lasting institutions for hands-on education. In: CASI ASTRO 2012, 2012-04-24 - 2012-06-24, Fairmont Château Frontenac Hotel.

Bourne, David and Corney, Jonathan and Gupta, Satyandra K. (2011) Recent advances and future challenges in automated manufacturing planning. Journal of Computing and Information Science in Engineering, 11 (2). -. ISSN 1530-9827

Boyle, I. and Rong, Y. M. and Brown, David C. (2011) A review and analysis of current computer-aided fixture design approaches. Robotics and Computer Integrated Manufacturing, 27 (1). pp. 1-12. ISSN 0736-5845

Bradley, Robert H. and Smith, Martin W. and Andreu, Aurik and Falco, Maurizio (2011) Surface studies of novel hydrophobic active carbons. Applied Surface Science, 257 (7). 2912 - 2919. ISSN 0169-4332

Bititci, Umit S. and Ackermann, Fran and Ates, Aylin and Davies, John and Garengo, Patrizia and Gibb, Stephen and MacBryde, Jillian and Mackay, David and Maguire, Catherine and van der Meer, Robert and Shafti, Farhad and Bourne, Michael and Firat, Seniye Umit (2011) Managerial processes : business process that sustain performance. International Journal of Operations and Production Management, 31 (8). 851 - 891. ISSN 0144-3577

Bittici, U. and Ackermann, F. and Ates, Aylin and Davies, John D. and MacBryde, Jillian C. and Gibb, S. and Mackay, David and Maguire, Catherine and Van Der Meer, R.B. and Shafti, F., EPSRC (Funder) (2011) Managerial processes : an operations management perspective towards dynamic capabilities. Production Planning and Control, 22 (2). pp. 157-173.

Bititci, U. and Mendibil, Kepa and Maguire, Catherine (2010) High value manufacturing : a case study in transformation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1599-1614. ISSN 2041-2975

Brooks, Jeffery and Tranter, P.H. (2010) Lifing approaches and component classification : overview of methods. In: Encyclopedia of Aerospace Engineering. John Wiley & Sons. ISBN 978-0-470-75440-5

Brooks, Jeffery and Basoalto, Hector (2010) The application of microstructure and property modelling to the prediction of forged component performance. In: OPTIMoM: Optimising Performance Through Integrated Modelling of Microstructure, 2010-09-26 - 2010-09-28.

Bititci, Umit and Mokadam, M (2010) Development of a collaborative supply chain model. In: 17th International Conference of the European Operations Management Association, 2009-06-06 - 2009-06-09. (Unpublished)

Bititci, Umit and Mokadam, M (2010) Investigating the role of innovation over collaborative relation intensity in supply chains. In: 17th International Conference of the European Operations Management Association, 2009-06-06 - 2009-06-09. (Unpublished)

Brooks, Jeffery and Basoalto, Hector and Sahota, R and Tranter, P.H. (2010) Probabilistic property prediction of aero-engine components for fatigue. In: ASME Turbo Expo 2010, GT 2010, 2010-06-13.

Brooks, Jeffery (2010) Advanced high temperature materials : gas turbine fatigue. In: 11th Australian Gas Turbine Conference, 2010-10-20 - 2010-10-21.

Brooks, Jeffery (2010) Evaluation of mechanical properties for the simulation of super plastic forming. In: EuroSPF Conference, 2010-09-08 - 2010-09-10.

Brooks, Jeffery (2010) Friction and wear during precision forging of high temperature aerospace materials. In: IOM3 - High Temperature Wear and Erosion, 2010-11-10 - 2010-11-10.

Basoalto, Hector and Brooks, Jeffery and Everitt, S (2009) Life prediction of thermal barrier coatings. In: Gas Turbines: High Temperature Coatings and Life Extension Conference, 2009-12-09 - 2009-12-10.

Basoalto, Hector and Brooks, Jeffery and Long, K.A. and Nicholls, J.R. (2009) Deposition technologies for thermal barrier coatings. In: Gas Turbines: High Temperature Coatings and Life Extension Conference, 2009-12-09 - 2009-12-10.

Bulgheroni, M. and D'Amico, E. and Bar-Heim, S. and Carus, D. and Harrison, C.S. and Marcellini, F. (2009) The SMILING project : prevention of falls by a mechatronic training device. In: The 2nd IASTED International Conference on Telehealth and Assistive Technology, TAT 2009, 2009-11-02 - 2009-11-04. (Unpublished)

Brooks, Jeffery and Basoalto, Hector and Wisbey, A and Kidd, G and McArthur, S and Fordyce, C.M. (2009) The evaluation of repair techniques for IN 738 and MarM002 nickel superalloys. In: RTO Applied Vehicle Technology Panel (AVT) Specialists’ Meeting, 2009-10-19 - 2009-10-22.

Bititci, U. and Garengo, P. and Dörfler, V. and Mendibil, K. (2009) Performance measurement: questions for tomorrow. In: Advanced Production Management Systems, 1900-01-01.

Boyle, Iain and Duffy, Alex H. B. and Whitfield, R. Ian and Liu, Shaofeng (2009) Towards an understanding of the impact of resources on the design process. In: 17th International Conference on Engineering Design (ICED `09), 2009-08-24 - 2009-08-27.

Basoalto, Hector and Brooks, Jeffery and Di Martino, I (2009) Multiscale microstructure modelling for nickel based superalloys. Materials Science and Technology, 25 (2). pp. 221-227. ISSN 0267-0836

Basoalto, Hector and Wisbey, A and Brooks, Jeffery (2009) A micromechanics approach to residual life assessment of nickel-based superalloys. In: 12th International Conference on Fracture, 2009-07-12 - 2009-07-17.

Bititci, Umit and Butler, P. and Cahill, William and Kearney, Denis (2009) Collaboration : A key competence for competing in the 21st Century. Supply Chain Perspectives, 10 (1). pp. 24-33.

Bititci, Umit and Maquire, C (2009) An investigation of productivity and competitiveness challenges facing European SMEs. In: Irish Academy of Management Conference, 2009-09-01. (Unpublished)

Bititci, Umit and Mendibil, Kepa and Wang, Dongbo and Lu, L. (2009) Business collaboration for competitiveness : a global perspective. In: 16th European Operations Management Conference, 2009-06-17.

Bititci, Umit and Mokadam, M (2009) Towards collaborative supply chains. In: 16th International European Operations Management Association Conference, 2009-06-14 - 2009-06-17. (Unpublished)

Boyle, Iain and Duffy, Alex and Whitfield, Ian and Liu, Shaofeng (2008) DecMS : an approach to providing decision support within NEC delivery. In: Realising Network Enabled Capability 2008, 2008-10-13 - 2008-10-14, Oulton Hall Hotel, Leeds.

Bititci, U. and Ackermann, F. and Ates, Aylin and Davis, J. and Gibb, S. and MacBryde, Jillian C. and Mackay, David and Maguire, Catherine and Van Der Meer, R.B. and Shafti, F. and Bourne, M. (2008) Manage processes: what are they? Working paper. University of Strathclyde, Glasgow, UK.

Bititci, U.S. and Butler, P. and Cahill, W. and Kearney, D. (2008) Collaboration : a key competence for competing in the 21st century. Working paper. University of Strathclyde.

Bititci, Umit and Ates, Aylin and Van Der Meer, Robert (2008) A process based perspective on strategy : a case study in a medium-sized manufacturing firm. In: 15th International Annual European Operations Management Association, EurOMA, 2008-01-01.

Bititci, Umit S and Walls, Lesley and Geraghty, Kathleen and Attri, Hitesh (2008) To outsource or not to outsource! Journal of Operations Management, 34 (1). pp. 9-17. ISSN 0272-6963

JISC (Joint Information Systems Committee); NSF (National Science Foundation) (Funder) (2008) DIDET: Digital libraries for distributed, innovative design education and teamwork. Final project report. [Report]

Buckley, M.A. and Wood, Paul (2008) Virtual vehicle development : requirements for safety CAE. In: AUTOSIM 6th Technology Workshop, 2008-04-22 - 2008-04-24.

Breslin, C. and Nicol, D. and Grierson, H. and Wodehouse, A. and Juster, N. and Ion, W. (2007) Embedding an integrated learning environment and digital repository in design engineering education : lessons learned for sustainability. British Journal of Educational Technology, 38 (5). pp. 805-816. ISSN 0007-1013

Bres, C. and Huang, Y. and Glesk, I. and Prucnal, P.R. (2007) Scalable asynchronous incoherent optical CDMA. Journal of Optical Networking, 6 (6). pp. 599-615. ISSN 1536-5379

Bititci, Umit and Ates, Aylin and Macbryde, Jillian and Van Der Meer, Robert and Ackermann, Fran (2007) Complementarities in strategy management. In: Proceedings of the 14th European Operations and Management Conference, 2007-06-01.

Banuelas, R. and Antony, J. (2007) Application of stochastic analytic hierarchy process within a domestic appliance manufacturer. Journal of the Operational Research Society, 58 (1). pp. 29-38. ISSN 0160-5682

Ball, Peter D. and Grierson, Hilary J. and Min, Jo and Jackman, John K. and Patterson, Patrick (2007) Working on an assignment with people you'll never meet! Case study on learning operations management in international teams. International Journal of Engineering Education, 23 (2). pp. 368-377. ISSN 0949-149X

Bititci, Umit (2007) An executives guide to business transformation. Business Strategy Series, 8 (3). pp. 203-213.

Bititci, Umit and Ates, Aylin and Garengo, P. (2007) Management development needs in SMEs : managerial practices versus theory. In: Proceedings of the 30th Institute for Small Business and Entrepreneurship Conference, 2007-10-01.

Bititci, Umit and Ates, Aylin and Macbryde, Jillian and Van Der Meer, Robert (2007) Creating strategy process capability in SMEs. In: Proceedings of the 10th Annual Irish Academy of Management, 2007-09-01.

Bititci, Umit and Ates, Aylin and Macbryde, Jillian and Van Der Meer, Robert (2007) An end-to-end process view of strategy management : a research framework. In: Proceedings of the 27th International Annual Strategic Management Society Conference, 2007-08-01.

Bititci, Umit and Davis, Katherine (2007) Change as a business process. In: Proceedings of the 14th European Operations and Management Conference, 2007-06-01. (Unpublished)

Bititci, Umit and Garengo, P. and Bernardi, G and Biazzo, S (2007) Performance Measurement in SMEs: An empirical study. Piccola Impressa Small Business (2). pp. 9-34.

Bititci, Umit and Maguire, Catherine (2007) Organisational transformation of Scottish SMEs. In: Irish Academy of Management Conference; Connecting Theory and Practice, 2007-09-03 - 2007-09-05. (Unpublished)

Bititci, Umit and Turner, Trevor and Mackay, David and Kearney, Denis and Parung, Joniarto and Walters, D (2007) Managing synergy in collaborative enterprises. Production Planning and Control, 18 (6). pp. 454-465.

Breslin, C. and Nicol, D. and Grierson, H. and Wodehouse, A. and Juster, N. and Juster, W. (2006) Embedding an integrated learning environment and digital repository: lessons learned. In: 10th EDCL Workshop, 2006-09-22.

Bititci, Umit and Veiseth, M (2006) Performance measurement in railway operations : improvement of punctuality and reliability. In: Proceeding sof the PMA conference, 2006-06-25 - 2006-06-28. (Unpublished)

Ball, P.D. and Bititci, U. (2006) Supply chain management diagnostic and improvement approach. Control, 32 (4). pp. 20-24. ISSN 0266-1713

Ball, P.D. and Busi, M. and Smith, M. and Van Der Meer, R.B. (2006) Innovation calling-components of the innovative organisation: a call centre perspective. In: 13th International Annual Conference of the European Operations Management Association, 2006-06-18 - 2006-06-21.

Bititci, U. and Busi, M. and Walls, L.A. (2006) Measuring the value of customer management: lessons from the UK call and contact industry. In: 17th Annual Conference of the Production and Operations Management Society, 2006-04-24 - 2006-05-01.

Bititci, U. and Busi, M. and Walls, L.A. (2006) A conceptual framework for understanding the shared services model. In: 17th Annual Conference of the Production and Operations Management Society, 2006-04-24 - 2006-05-01.

Bititci, U. and Turner, T.J. and Kearney, D. (2006) Collaborate to compete : a strategic weapon for SMEs. Logistics Solutions, 9 (2). pp. 23-26. ISSN 1393-7731

Bititci, Umit and Busi, Marco (2006) Collaborative performance measurement: a state of the art and future research. International Journal of Productivity and Performance Management, 55 (1). pp. 7-25. ISSN 1741-0401

Bititci, Umit and Mendibil, Kepa and Nudurupati, Sai and Turner, Trevor and Garengo, Patrizia (2006) Dynamics of performance measurement and organizational culture. International Journal of Operations and Production Management, 26 (12). pp. 1325-1350. ISSN 0144-3577

Busi, M. and Bititci, U. (2006) Collaborative performance management: present gaps and future research. International Journal of Productivity and Performance Management, 55 (1). pp. 7-25. ISSN 1741-0401

Bititci, Umit and Cavalieri, Stefano and Cieminski, G (2005) Implementation of performance measurement systems : private and public sectors. Production Planning and Control, 16 (2). pp. 99-100.

Bititci, U. and Mendibil, Kepa and Martinez, Veronica and Albores-Barajas, Pavel A. (2005) Measuring and managing performance in extended enterprises. International Journal of Operations and Production Management, 25 (4). 333 - 353. ISSN 0144-3577

Bititci, Umit and Ball, P.D. and Mendibil, Kepa (2005) Managing performance in the product lifecycle : a case study from tender to support. In: International Conference on Product Lifecycle Management, 2005-07-11 - 2005-07-13. (Unpublished)

Bititci, Umit and Parung, Joniarto (2005) Measuring contribution in collaborative enterprises. In: EurOMA 2005, 2005-06-19 - 2005-06-23. (Unpublished)

Ball, Peter D. and Albores-Barajas, Pavel A. and MacBryde, Jillian C. (2004) Requirements for modelling e-business processes. Production Planning and Control, 15 (8). pp. 776-785. ISSN 0953-7287

Ball, Peter D. and Tang, Nelson and Benton, Helen and Love, Doug and Albores-Barajas, Pavel A. and MacBryde, Jillian C. and Boughton, Nick and Drake, Paul (2004) Developing an enterprise simulator to support electronic supply chain for B2B electronic business. Production Planning and Control, 15 (6). pp. 572-583. ISSN 0953-7287

Balendra, Rajendram and Qin, Yi (2004) Research dedicated to the development of advanced metal-forming technologies. Journal of Materials Processing Technology, 145 (2). pp. 144-152. ISSN 0924-0136

Balendra, Raj and Qin, Yi (2004) Injection forging : engineering and research. Journal of Materials Processing Technology, 145. pp. 189-206. ISSN 0924-0136

Ball, Peter D. and Thornbury, Helyn E (2004) A student learning environment without the overhead? Reviewing costs and benefits of CAL within a manufacturing course. International Journal of Engineering Education, 20 (5). pp. 713-725. ISSN 0949-149X

Bititci, U. and Mendibil, Kepa and Nudurupati, Sai S. and Turner, Trevor J. and Garengo, Patrizia (2004) The interplay between performance measurement, organizational culture and management styles. Measuring Business Excellence, 8 (3). pp. 28-41. ISSN 1368-3047

Bititci, Umit and Acur Bakir, Nuran (2004) A balanced approach to strategy management international. International Journal of Operations and Production Management, 24 (4). pp. 388-408. ISSN 0144-3577

Bititci, Umit and Garengo, Patrizia and Bernardi, G (2004) La misurazione delle prestazioni nelle piccole e medie imprese : i risultati di uno studio empirico. In: Italian annual conference of Engineering Managers, 2004-01-01.

Bititci, Umit and Garengo, Patrizia and Biazzo, S (2004) Performance measurement systems in SMEs : diffusion, characteristics and models. In: annual conference of the British Association of Management, 2004-09-01. (Unpublished)

Bititci, Umit and Martinez, Veronica and Albores-Barajas, Pavel and Parung, Joniarto (2004) Creating and managing value in collaborative networks. International Journal of Physical Distribution and Logistics Management, 34 (3/4). 251 - 268. ISSN 0960-0035

Bititci, Umit and Mccallum, Neil (2004) Understanding and managing the manage processes. In: conference of the Performance Measurement Association, 2004-07-28. (Unpublished)

Bititci, Umit and Mendibil, Kepa and Nudurupati, Sai and Turner, Trevor and Garengo, Patrizia (2004) Understanding the impact of management culture on performance measurement. In: annual conference of the IFIP’s Working Group, 2004-09-05. (Unpublished)

Bititci, U. and Martinez, Veronica and Albores-Barajas, Pavel A. and Mendibil, Kepa (2003) Creating and sustaining competitive advantage through collaboration systems: The what and the how. Production Planning and Control, 4 (5). pp. 410-424. ISSN 0953-7287

Bititci, Umit and Nudurupati, Sai (2003) Human aspects of IT supported performance measurement. In: IFIP International Conference, 2003-10-05. (Unpublished)

Ball, P.D. and Albores, Pavel and MacBryde, Jillian C. (2003) Using simulation to evaluate e-business process implementations. In: Computer-aided production engineering 2003. Professional Engineering Publishing, Bury-St-Edmunds, United Kingdom, pp. 319-326. ISBN 9781860584046

Ball, P.D. and MacBryde, J.C. and Albores-Barajas, P.A. (2003) Using simulation to validate performance measure hierarchies in supply chains. In: Industrial Engineering and Production Management, 2003-01-01. (Unpublished)

Bititci, Umit and Harris, H. (2003) Practical implications of the moral nature of networks. In: Proceedings of International Conference on Manufacturing Excellence, 2003-10-13. (Unpublished)

Bititci, Umit and McLeod, M and Turner, Trevor (2003) Using OEE to improve performance of an fast moving food company. In: Proceedings of the 3rd International Workshop on Performance Measurement, 2003-06-19. (Unpublished)

Bititci, Umit and Nudurupati, Sai (2003) Impact of IT enabled performance measurement on business and management. In: Proceedings of the European Operations Management Association, 1993-06-16.

Bititci, Umit and Nudurupati, Sai (2003) Implementation and impact of IT supported PMS. In: Proceedings of the 3rd International Workshop on Performance Measurement, 2003-06-19. (Unpublished)

Bititci, Umit and Turner, Trevor and Mcalinden, Niall (2003) Using first pass yield to improve performance of an SME. In: Proceedings of the 3rd International Workshop on Performance Measurement, 2003-06-19. (Unpublished)

Borg, Jonathan C. and Farrugia, Philip J. and Camilleri, Kenneth P. and Giannini, Franca and Yan, X. T. and Scicluna, Dawn (2003) Why CAD tools benefit from a sketching language. In: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm. Design Society, Glasgow. ISBN 1-904670-00-8

Bititci, Umit and Martinez, Veronica (2002) The value cube, a tool to create value : origins and applications. In: Conference Proceedings IEEE International Engineering Management Conference, 2002-08-18.

Badique, E. and Cavazza, M. and Klinker, G. and Mair, G.M. and Sweeney, T. and Thalmann, D. and Thalmann, N.M. (2002) Entertainment applications of virtual environments. In: Handbook of Virtual Environments. Lawrence Erlbaum, pp. 1143-1167. ISBN 080583270X

Bititci, U. and MacBryde, J.C. (2002) Guest editorial: special issue on performance measurement. International Journal of Operations and Production Management, 22 (11). pp. 1196-1197. ISSN 0144-3577

Bititci, U. and Nudurupati, S.S. and Turner, T.J. (2002) Web enabled performance measurement systems. Journal of Materials Processing Technology, 22 (11). pp. 1273-1287. ISSN 0924-0136

Bititci, Umit (2002) Integrated performance measurement systems: an audit approach. Control, 28 (4). pp. 17-22.

Bititci, Umit (2002) Integrated performance measurement systems: the competitive business structure. Control, 28 (1). pp. 18-22.

Bititci, Umit and Mccallum, Neil and Bourne, Mike and Macbryde, Jillian and Turner, Trevor (2002) Performance indicators for sustainable competitive advantage : the next frontier. In: Proceedings of the 2nd International Workshop on Performance Measurement, 2002-06-06.

Bititci, Umit and Mendibil, Kepa and Turner, Trevor (2002) Managing and improving business processes reliability. International Journal of Business Performance Management, 4 (1).

Bititci, Umit and Nudurupati, Sai (2002) Web based performance measurement systems: management implications. International Journal of Operations and Production Management, 22 (11). ISSN 0144-3577

Bititci, Umit and Nudurupati, Sai and Maddocks, S (2002) Web enabled performance measurement systems : management implications. In: Proceedings of the PMA Conference, 2002-07-17. (Unpublished)

Bititci, Umit and Martinez, Veronica (2001) The value matrix and its evolution. In: 8th International Annual Conference of the European Operations Management Association, 2001-06-03 - 2001-06-05.

Bititci, U. and Suwignjo, P. and Carrie, A.S. (2001) Strategy management through quantitative modelling of performance measurement systems. International Journal of Production Economics, 69 (1). pp. 15-22. ISSN 0925-5273

Ball, Peter D. and Bititci, Umit and Muir, Daniel and McCluskey, Bryan and Watson, David (2001) Implementing ERP : comparative case studies. In: IFIP Working Conference on Strategic Manufacturing, 2001-08-26 - 2001-08-29.

Bititci, Umit and Bourne, M. (2001) Performance measures for competitive sustainable advantage. In: IFIP Working Conference on Strategic Manufacturing, 2001-08-26 - 2001-08-29.

Bititci, Umit and Turner, Trevor and Bourne, M. (2001) Performance measurement: the comparison between a process and a model approach. International Journal of Business Performance Management, 3 (2/3/4). pp. 135-153.

Balendra, Rajendram and Qin, Yi (2000) Finite element modelling and CAD/CAM of nett-forming by injection forging : [Chapter 4]. In: Computer-Aided Design, Engineering and Manufacturing. CRC Press, London, 4-1-. ISBN 0-8493-0998-0

Ball, P.D. and Bititci, U. (2000) Implementing ERP systems - organisational implications. IOM Control Magazine, 26 (9). pp. 23-37.

Balendra, R and Qin, Y (2000) Identification and classification of flow-dependent defects for injection forging of solid billets. Journal of Materials Processing Technology, 106 (1-3). pp. 199-203. ISSN 0924-0136

Balendra, R and Qin, Yi and Lu, X (2000) Analysis, evaluation and compensation of component-errors for nett-forming of engineering components. Journal of Materials Processing Technology, 106 (1-3). pp. 204-211. ISSN 0924-0136

Bridges, A. and Grierson, H. (2000) The use of Internet technologies in delivering architectural CPD. In: Construction Information Technology. CIT2000, Reykjavik, Iceland, pp. 136-144. ISBN 9979917431

Bititci, Umit (2000) Dynamics of performance measurement systems. International Journal of Operations and Production Management, 20 (5). pp. 692-704. ISSN 0144-3577

Bititci, Umit and Acur Bakir, Nuran (2000) Measuring potential success of startegy. In: Conference on Strategic Manufacturing, 2001-08-01.

Bititci, Umit and Carrie, Allan and Hayfron, Lee (2000) Manufacturing franchising : suitable business types. In: IFIP WG5.7 conference, 2000-01-01.

Bititci, Umit and Martinez, Veronica (2000) The value matrix. In: IFIP WG5.7 conference, 2000-01-01.

Bititci, Umit and Suwignjo, P. and Carrie, Allan (2000) Quantitative models for performance measurement systems. International Journal of Production Economics, 64 (1-3). pp. 231-241. ISSN 0925-5273

Bititci, Umit and Carrie, Allan and Turner, Trevor and Begemann, C (1999) Dynamic behaviour of performance measurement systems. In: European Operations Management Association, 1999-06-01.

Bititci, Umit and Carrie, Allan and Turner, Trevor and Suwignjo, P. (1999) Systems for managing the dynamics of performance measurement. In: IFIP WG5.7 Annual Working Conference, 1999-09-01.

Balendra, Rajendram and Qin, Yi (1998) Nett-forming by injection forging - technical development and research. In: 14th International Conference on Computer-Aided Production Engineering, 1998-09-08 - 1998-09-10.

Bititci, Umit and Turner, Trevor and Carrie, Allan and Lutz, S (1998) Integrated performance measurement systems : implementation case studies. In: Strategic management of the manufacturing value chain. International Federation for Information Processing . Kluwer Academic Publishers, USA, pp. 177-184. ISBN 0412827107

Bititci, Umit and Carrie, Allan and McDevitt, L and Turner, Trevor (1998) Integrated performance measurement systems : a reference model. In: IFIP WG5.7 Annual Working Conference on Organising the Extended Enterprise, 1998-01-01.

Bititci, Umit and Carrie, Allan and Suwignjo, P. (1998) Quantitative models for aggregating and prioritising performance measures. In: Proceedings of the International Workshop on Production Economics, 1998-02-01.

Bititci, Umit and Carrie, Allan and Turner, Trevor (1998) Diagnosing the integrity of your performance measurement system. Control, 24 (3).

Bititci, Umit and Carrie, Allan and Turner, Trevor and Lutz, S (1998) Performance measurement research at CSM. In: International Conference on Managing Enterprise Performance, 1998-12-01.

Bititci, Umit and Coll, F.E. (1998) Resource-based and network theories : a comparison. In: Advances in Manufacturing Technology XII. Professional Engineering Publishing Ltd., pp. 447-453. ISBN 1860581722

Bititci, Umit and Hayfron, Lee and Carrie, Allan and Pandya, K.V. (1998) Issues in manufacturing franchising. In: Managing Innovative Manufacturing Conference, 1998-01-01.

Bititci, Umit and Turner, Trevor (1998) Maintaining reliability of business processes using active monitoring techniques. In: Strategic management of the manufacturing value chain. International Federation for Information Processing . Kluwer Academic Publishers, pp. 169-176. ISBN 0412827107

Bititci, Umit and Turner, Trevor and Campbell, J. and Carrie, Allan (1998) Design and implementation of a business improvement model in a chemicals business. In: Internation conference on Performance Measurement, 2008-01-01.

Balendra, R. and Qin, Y. (1997) Material-flow considerations for the design of injection forging. Journal of Manufacturing Science and Engineering, 119 (8). pp. 350-357. ISSN 1528-8935

Balendra, Rajendram and Liu, C. and Qin, Yi (1997) Material-flow defects in injection forging. In: 13th National Conference on Manufacturing Research, 1997-09-09 - 1997-09-11.

Balendra, Rajendram and Qin, Yi (1997) Classification of forming defects for injection forging. In: International Conference on Challenges to Civil and Mechanical Engineering, 1997-07-07.

Bititci, Umit (1997) Improving industrial performance through research and technology transfer. In: 2nd Henry Dyer Symposium, 1997-03-01.

Bititci, Umit and Carrie, Allan and Allan, Stuart and McDevitt, L and Turner, Trevor (1997) Auditing the integrity of the performance measurement system. In: 32nd MATADOR Conference, 1997-07-01.

Bititci, Umit and Carrie, Allan and McDevitt, L (1997) Integrated performance measurement systems : a development guide. International Journal of Operations and Production Management, 17 (5). 522 - 534. ISSN 0144-3577

Bititci, Umit and Carrie, Allan and McDevitt, L (1997) Integrated performance measurement systems: an audit and development guide. TQM Magazine, 9 (1). pp. 46-53. ISSN 0954-478X

Bititci, Umit and Carrie, Allan and McDevitt, L (1997) Performance measurement : a business process view. In: IFIP WG 5.7 Working Conference on Modelling Techniques for Business Process Re-engineering and Benchmarking, 1997-01-01.

Bititci, Umit and Gembeh, A.B. (1997) Structured design technique for the implementation of quality procedures to ISO 9001. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Muir, David (1997) Business process definition : a bottom-up approach. International Journal of Operations and Production Management, 17 (4). 365 - 374. ISSN 0144-3577

Bititci, Umit and Suwignjo, P. and Carrie, Allan (1997) Quantitative models for performance measurement system : an analytical hierarchy process approach. In: Managing Enterprises - Stakeholders, Engineering, Logistics, and Achievement, 1997-01-01.

Balendra, Rajendram and Wanheim, T and Qin, Yi (1996) Extrusion die design for in-process compensation of component errors. In: International Conference on Industrial Tools (ICIT 1996), 1996-04-08.

Balendra, Rajendram and Qin, Yi (1996) Feasibility and limitations of pressure-assisted injection forging of thick-walled tubes. In: Advanced technology of plasticity, 1996, 1996-10-07 - 1996-10-10.

Balendra, Rajendram and Qin, Yi and Lu, X. (1996) Development of approach and technology for die-cavity elasticity error analysis and compensation for nett-forming of components. In: International Conference on Challenges to Civil and Mechanical Engineering, 1997-07-07.

Bititci, Umit (1996) Modelling Performance Measurement Systems in Manufacturing Enterprises. International Journal of Production Economics, 42 (2). pp. 137-147. ISSN 0925-5273

Bititci, Umit and Carrie, A.S. and McDevitt, L (1996) Integrated performance measurement systems : fruits of university, industry and government collaboration. In: International Congress UnIG’96, 1996-06-01.

Bititci, Umit and McDevitt, L (1996) Performance measurement as a competitive weapon. In: Proceedings of the Irish Manufacturing Committee Conference, 1996-09-01.

Bititci, Umit and Muirhead, C and Moreland, S and Pandya, K.V. (1996) Development of procedures in a small screen printing company. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Pandya, K.V. and Muirhead, C (1996) Managing in a owner managed small printing company. In: Improving Competitiveness in SME’s, 1996-12-01.

Balendra, Rajendram and Qin, Yi (1995) Pressure-assisted injection forging of thick-walled tubes. International Journal of Machine Tools and Manufacture, 35 (11). pp. 1481-1492. ISSN 0890-6955

Balendra, Raj and Qin, Yi (1995) Die-elasticity errors during nett-forming of engineering components. In: Advances In Manufacturing Technology IX. CRC/Taylor & Francis Group, pp. 204-208. ISBN 9780748404001

Balendra, Rajendram and Qin, Yi (1995) Analysis and evaluation of errors in nett-form manufacturing of components. In: Computer integrated manufacturing : proceedings of the 3rd international conference; 11 - 14 July 1995, Singapore International Convention & Exhibition Centre. World Scientific, pp. 1165-1171. ISBN 9810229747

Bititci, Umit (1995) Measuring the integrity of your business. Management Decision, 33 (7). pp. 10-18.

Bititci, Umit (1995) Performance measurement systems for performance management. In: IFIP WG5.7 Working Conference, 1995-09-01.

Bititci, Umit (1995) A methodology for implementation of integrated performance measurement systems. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Carrie, Allan (1995) Benchmarking : the integrated performance measurement system. In: NATO Advanced Study Institute Workshop, 1995-06-01.

Bititci, Umit and Kemp, S. (1995) Groupware and multimedia technology for improved manufacturing integration. In: Irish Manufacturing Committee 12th Conference, 1995-09-01 - 1995-09-01.

Balendra, Rajendram and Qin, Yi (1994) FE simulation of the development of flaws during injection forging. International Journal of Machine Tools and Manufacture, 34 (8). pp. 1091-1101. ISSN 0890-6955

Balendra, Rajendram and Qin, Yi (1994) Decision-support-system for the comparative evaluation of processing options during component design. In: 10th International Conference on Computer-aided Production Engineering, 1994-06-07 - 1994-06-09, Universitaʹ di Palermo.

Bititci, Umit (1994) Business integration methods : a requirements specification. In: Advances in manufacturing yechnology, volume III. Taylor & Francis. ISBN 9780748402540

Bititci, Umit (1994) Measuring your way to profit. Management Decision, 32 (6). pp. 16-24.

Bititci, Umit (1994) Measuring your way to profit. In: Proceedings of the FAIM'93, 1993-06-01.

Bititci, Umit (1994) People issues in manufacturing integration. In: Advances in Agile Manufacturing, 1994-01-01.

Bititci, Umit (1994) Use and miss-use of performance measures. In: 1st EurOMA Conference, 1994-06-01.

Bititci, Umit and MacTaggart, J. (1994) The human aspect of management of change : a case study. In: Factory 2000 Conference, 1994-01-01.

Bititci, Umit (1993) Integrated performance measures the key to integration. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit (1993) Total-I : a methodology for business integration. In: Proceedings of the ICCIMM'93, 1993-08-01.

Bititci, Umit and Carrie, A.S. and McMillan, C.R. (1991) Linking shop-floor and management systems in real-time. In: Production research. Taylor & Francis. ISBN 9780850667523

Bititci, Umit and Turnbull, R and Barnett, B and C, Neill (1991) Marketing v production : breaking the barriers. In: Annual BPICS European Conference: Surviving through turbulent times, 2001-10-01.

Bititci, Umit and Thomson, William and Mullen, T.D. (1990) Implementing JIT in a small manufacturing company. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Large, M (1989) Modular architecture for cell management systems. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit (1989) A generic architecture for cell management and control systems. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Carrie, Allan (1989) Integrating material flow and information systems. In: Special Interest Conference on Methods in Manufacturing Systems Engineering, 1989-01-01.

Bititci, Umit and Gohari, M (1989) Diagnostic systems for FMS. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit and Patel, R (1989) Common architecture for a co-ordination controller in a flexible manufacturing cell. In: National Conference on Production Research, 1989-09-01 - 1989-09-01.

Bititci, Umit (1988) Use of expert systems in the specification of manufacturing systems. In: Advances in Manufacturing Technology, 1997-09-01.

Bititci, Umit (1988) A strategy for designing integrated manufacturing systems. In: Fourth international conference on computer-aided production engineering. Mechanical Engineering Publ, pp. 327-334. ISBN 0852986823

Bititci, Umit and Kehoe, D.F. (1987) Implementing manufacturing strategy through the application of programmable control. In: MACON-2 Conference, 1987-05-01.

Bititci, Umit and Little, Derek and Kehoe, D.F. and Goulding, K.G. (1987) The application of a JIT assembly program, based upon modular master scheduling. In: AUTOMAN 4 Conference, 1987-05-01.

C

Cai, Yukui and Luo, Xichun and MacLean, Michelle and Qin, Yi and Duxbury, Mark and Ding, Fei (2019) A single-step fabrication approach for development of antimicrobial surfaces. Journal of Materials Processing Technology, 271. pp. 249-260. ISSN 0924-0136

Cai, Yukui and Luo, Xichun and Xu, Zongwei and Lau, King Hang Aaron and Ding, Fei and Qin, Yi (2019) A hybrid laser ablation and chemical etching process for manufacturing nature-inspired anisotropic superhydrophobic structures. In: EUSPEN's 19th International Conference & Exhibition, 2019-06-03 - 2019-06-07.

Cai, Yukui and Luo, Xichun and Liu, Zhanqiang and Qin, Yi and Chang, Wenlong and Sun, Yanzhou (2019) Product and process fingerprint for nanosecond pulsed laser ablated superhydrophobic surface. Micromachines. ISSN 2072-666X (In Press)

Cocuzza, Silvio and Yan, X.-T. (2018) First engineering framework for the out-of-plane robotic shaping of thin rheological objects. Robotics and Computer Integrated Manufacturing, 53. pp. 108-121. ISSN 0736-5845

Chan, Kit Yan and Kwong, C.K. and Clark, Ponnie and Jiang, Huimin and Fung, Chris K.Y. and Abu Salih, Bilal and Liu, Zhixin and Wong, Andy T.C. and Jain, Pratima (2018) Affective design using machine learning : a survey and its prospect of conjoining big data. International Journal of Computer Integrated Manufacture. ISSN 0951-192X

Cai, Yukui and Chang, Wenlong and Luo, Xichun and Qin, Yi (2018) Superhydrophobicity of micro-structured surfaces on zirconia by nanosecond pulsed laser. Journal of Micromanufacturing. ISSN 2516-5992 (In Press)

Collins, Ross and Kerr, Andrew and Thomson, Avril (2018) User requirements for an upper limb weight support device for stroke rehabilitation. In: The Society for Research in Rehabilitation 40th Anniversary and Winter Meeting in Bristol, 2018-02-06 - 2018-02-06, Conference Centre.

Costa Melo, Isotilia and Rentizelas, Athanasios and Alves Junior, Paulo Nocera and Campoli, Jessica Suarez and do Nascimento Rebelatto, Daisy Aparecida (2018) An assessment of biomass supply chain : a DEA application. Athens Journal of Sciences, 5 (2). pp. 125-140.

Cai, Yukui and Chang, Wenlong and Luo, Xichun and Sousa, Ana M.L. and Lau, King Hang Aaron and Qin, Yi (2018) Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser. Precision Engineering, 52. pp. 266-275. ISSN 0141-6359

Carreño, Francisco and Post, Mark (2018) Design of a novel wheeled tensegrity robot : a comparison of tensegrity concepts and a prototype for travelling air ducts. Robotics and Biomimetics, 5 (1). ISSN 2197-3768 (In Press)

Chen, Senyong and Qin, Yi and Chen, J.G. and Choy, Chee-Mun (2018) A forging method for reducing process steps in the forming of automotive fasteners. International Journal of Mechanical Sciences, 137. pp. 1-14. ISSN 0020-7403

Campbell, Andrew and Murray, Paul and Yakushina, Evgenia and Marshall, Stephen and Ion, William (2018) New methods for automatic quantification of microstructural features using digital image processing. Materials & Design, 141. pp. 395-406. ISSN 0264-1275

Chaowanapong, Jirapan and Jongwanich, Juthathip and Ijomah, Winifred (2018) The determinants of remanufacturing practices in developing countries : evidence from Thai industries. Journal of Cleaner Production, 170. pp. 369-378. ISSN 0959-6526

Chaowanapong, Jirapan and Jongwanich, Juthathip and Ijomah, Winifred (2017) Factors influencing a firm's decision to conduct remanufacturing : evidence from the Thai automotive parts industry. Production Planning and Control, 28 (14). pp. 1139-1151. ISSN 0953-7287

Chen, Senyong and Qin, Yi and Choy, Chee-Mun and Chen, J.G. (2017) Testing an injection forging process for the production of automotive fasteners. Procedia Engineering, 207. pp. 508-513. ISSN 1877-7058

Cai, Yukui and Sousa, Ana M. L. and Lau, King Hang Aaron and Chang, Wenlong and Luo, Xichun (2017) Fabrication of hydrophobic structures by nanosecond pulse laser. In: 15th International Conference on Manufacturing Research, 2017-09-05 - 2017-09-07, University of Greenwich.

Chiappetta Jabbour, Charbel José and Sobreiro, Vinicius Amorim and Lopes de Sousa Jabbour, Ana Beatriz and Souza Campos, Lucila Maria and Mariano, Enzo Barberio and Renwick, Douglas William Scott (2017) An analysis of the literature on humanitarian logistics and supply chain management : paving the way for future studies. Annals of Operations Research. pp. 1-19. ISSN 0254-5330

Chen, Yi and Li, Yun and Yu, Hongnian and Yang, Erfu and Hu, Huosheng (2017) Evolutionary design for intelligent design and manufacture - a Computer-Automated Design (ACutoD) in the digital age. In: Industrial Systems in the Digital Age Conference 2017, 2017-06-20 - 2017-06-21, University of Glasgow.

Cairns, Nicola and Corney, Jonathan and Murray, Kevin and Moore-Millar, Karena and Hatcher, Gillian D and Zahedi, Saeed and Bradbury, Richard and McCarthy, Joe (2017) Rethinking the foam cosmesis for people with lower limb absence. Prosthetics and Orthotics International. ISSN 0309-3646

Cai, Yukui and Chang, Wenlong and Luo, Xichun and Qin, Yi (2017) Hydrophobicity of pyramid structures fabricated by micro milling. In: 2017 World Congress on Micro and Nano Manufacturing, 2017-03-27 - 2017-03-30, Garden Villa.

Chang, Wenlong and Zhong, Wenbin and Ding, Fei and Wardie, Frank and Luo, Xichun (2017) Development of a compact ultra-precision six-axis hybrid micro-machine. In: 2017 World Congress on Micro and Nano Manufacturing, 2017-03-27 - 2017-03-30, Garden Villa.

Campbell, A. and Murray, P. and Yakushina, E. and Marshall, S. and Ion, W. (2017) Automated microstructural analysis of titanium alloys using digital image processing. IOP Conference Series: Materials Science and Engineering, 179 (1). ISSN 1757-899X

Chen, Yi and Wang, Zhonglai and Yang, Erfu and Li, Yun (2016) Pareto-optimality solution recommendation using a multi-objective artificial wolf-pack algorithm. In: The 10th International Conference on Software, Knowledge, Information Management and Application (SKIMA 2016), 2016-12-15 - 2016-12-17, Sichuan Province.

Cepollaro Diana, Gabriel and Chiappetta Jabbour, Charbel Jose and Lopes de Sousa Jabbour, Ana Beatriz and Kannan, Devika (2016) Putting environmental technologies into the mainstream : adoption of environmental technologies by medium-sized manufacturing firms in Brazil. Journal of Cleaner Production. pp. 1-18. ISSN 0959-6526

Cocuzza, Silvio and Li, Mutian and Yan, Xiu Tian (2016) Soft and energy-efficient robotic capture of tumbling spacecrafts. Proceedings of the International Astronautical Congress, IAC. ISSN 0074-1795

Cocuzza, Silvio and Li, Mutian and Yan, Xiu (2016) Soft and minimum reactions robotic capture of non-cooperative spacecrafts. In: 67th International Astronautical Congress (IAC 2016). International Astronautical Federation (IAF), Paris, p. 3748. ISBN 9781510835825

Cocuzza, Silvio and Montfort, Baudouin and Gomes, Samuel and Yan, Xiu (2016) Smart and lightweight robotic capture system of space debris. In: 67th International Astronautical Congress (IAC 2016). International Astronautical Federation (IAF), Paris, pp. 7341-7353. ISBN 9781510835825

Cocuzza, Silvio and Tringali, Alessandro and Yan, Xiu (2016) Energy-efficient motion of a space manipulator. In: 67th International Astronautical Congress (IAC 2016). International Astronautical Federation (IAF), Paris, pp. 8788-8804. ISBN 9781510835825

Cai, Yukui and Liu, zhanqiang and Wan, Yi and Luo, Xichun (2016) Characterisation of thrust performance of micro-nozzle machined by micro end-milling. In: 16th euspen International Conference, 2016-05-30 - 2016-06-02, East Midland Conference Centre.

Chen, Wanqun and Luo, Xichun and Su, Hao and Wardle, Frank (2016) An integrated system for ultra-precision machine tool design in conceptual and fundamental design stage. International Journal of Advanced Manufacturing Technology, 84 (5). pp. 1177-1183. ISSN 0268-3768

Chavoshi, Saeed Zare and Luo, Xichun (2016) An atomistic simulation investigation on chip related phenomena in nanometric cutting of single crystal silicon at elevated temperatures. Computational Materials Science, 113. pp. 1-10. ISSN 0927-0256

Chen, Senyong and Qin, Yi (2015) Comparison study of multistep forging and injection forging of automobile fasteners. In: 4th International Conference on New Forming Technology (ICNFT 2015). MATEC Web of Conferences . EDP Sciences. ISBN 9782759818235

Chrominski, W. and Olejnik, L. and Rosochowski, A. and Lewandowska, M. (2015) Grain refinement in technically pure aluminium plates using incremental ECAP processing. Materials Science and Engineering: A, 636. pp. 172-180. ISSN 0921-5093

Chan, C. M. and Wong, T. C. (2014) Quality improvement of general out-patient clinics in Hong Kong. In: 2013 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, Piscataway, New Jersey, United States, pp. 1062-1066. ISBN 9781479909865

Chen, Wanqun and Liang, Yingchun and Luo, Xichun and Xie, Wenkun (2014) An integrated dynamic design system for aerostatic spindle development. In: Automation and Computing (ICAC), 2014 20th International Conference on. IEEE, Piscataway, pp. 96-99. ISBN 9781909522022

Chen, Wanqun and Liang, Yingchun and Luo, Xichun and Sun, Yazhou and Wang, Heran (2014) Multi-scale surface simulation of the KDP crystal fly cutting machining. International Journal of Advanced Manufacturing Technology, 73 (1-4). pp. 289-297. ISSN 0268-3768

Cebula, Izabela and Lu, Hao and Zharnikov, Michael and Buck, Manfred (2013) Monolayers of trimesic and isophthalic acid on Cu and Ag : The influence of coordination strength on adsorption geometry. Chemical Science, 4 (12). pp. 4455-4464. ISSN 2041-6520

Cairns, Nicola and Pearcy, Mark and Smeathers, James and Adam, Clayton (2013) Finite element modelling of the mechano-biological interface changes around transfemoral osseointegrated implants and the simulated dynamic properties. In: 5th International Conference: Advances in Orthopaedic Osseointegration, 2013-05-31 - 2013-06-01.

Cairns, Nicola and Pearcy, Mark and Smeathers, James and Adam, Clayton (2013) Modelling the mechano-biological interface changes around transfemoral osseointegrated implants using physical models and detecting the changes with vibration analysis. In: 5th International Conference: Advances in Orthopaedic Osseointegration, 2013-05-31 - 2013-06-01.

Corney, Jonathan and Annamalai Vasantha, Gokula Vijayumar and Lynn, Andrew and Jagadeesan, Ananda Prasanna and Acur Bakir, Nuran and Smith, Marisa and Agarwal, Anupam (2013) Computing the incomputable with human processing units. In: Intelligent interactive technologies and multimedia. Communications in computer and information science, 276 . Springer, pp. 14-24. ISBN 9783642374623

Coury, M. and Carroll, D. C. and Robinson, A. P. L. and Yuan, X. H. and Brenner, C. M. and Burza, M. and Gray, R. J. and Lancaster, K. L. and Li, Y. T. and Lin, X. X. and MacLellan, D. A. and Powell, H. and Quinn, M. N. and Tresca, O. and Wahlstrom, C. -G. and Neely, D. and McKenna, P. (2013) Injection and transport properties of fast electrons in ultraintense laser-solid interactions. Physics of Plasmas, 20 (4). ISSN 1070-664X

Cairns, Nicola and Murray, Kevin (2013) The influence of polyurethane cosmeses on the mechanical performance of transfemoral prostheses. In: ISPO 2013 World Congress, 2013-02-04 - 2013-02-07, HICC.

Cairns, Nicola and Pearcy, Mark and Smeathers, James and Adam, Clayton (2013) Ability of modal analysis to detect osseointegration of implants in transfemoral amputees : a physical model study. Medical and Biological Engineering and Computing, 51 (1-2). pp. 39-47. ISSN 0140-0118

Cairns, Nicola and Murray, Kevin and Corney, Jonathan and McFadyen, Angus (2013) Satisfaction with cosmesis and priorities for cosmesis design reported by lower limb amputees in the United Kingdom : instrument development and results. Prosthetics and Orthotics International. ISSN 0309-3646

Conway, Alastair and Ion, William (2013) Enhancing the design dialogue : an architecture to document engineering design activities. Journal of Engineering Design, 24 (2). pp. 140-164. ISSN 0954-4828

Cairns, Nicola and Pearcy, Mark and Smeathers, James and Adam, Clayton (2012) Simulating the bone-titanium interfacial changes around transfemoral osseointegrated implants using physical models and modal analysis. In: The International Workshop on Innovative Simulation for Healthcare, 2012-09-19 - 2012-09-21.

Cairns, Nicola and Corney, J and Murray, K (2012) Mechanical testing of polyurethane foams to cover lower limb prostheses. In: Orthopadie + Reha-Technik 2012, 2012-05-15 - 2012-05-18.

Chang, Wenlong and Luo, X. and Sun, J. and Zhao, Q. and Zhao, Y. (2012) Laser assisted micro grinding of high strength materials. In: Precision Machining VI. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 44-49. ISBN 9783037852972

Chamoret, D and Roth, S and Feng, Z.-Q and Yan, Xiu and Gomes, S and Peyraut, F (2012) A novel approach to modelling and simulating the contact behaviour between a human hand model and a deformable object. Computer Methods in Biomechanics and Biomedical Engineering, 16 (2). pp. 130-140. ISSN 1025-5842

Chiodo, Joseph and Ijomah, Winifred (2012) Use of active disassembly technology to improve remanufacturing productivity : automotive application. International Journal of Computer Integrated Manufacture. pp. 1-11. ISSN 0951-192X

Cochrane, W.A. and Luo, Xichun and Lim, Tee and Taylor, W.D. and Schnetler, H. (2012) Design of a micro-autonomous robot for use in astronomical instruments. International Journal of Optomechatronics, 6 (3). pp. 199-212. ISSN 1559-9612

Cairns, Nicola Jeanne and Corney, Jonathan and Murray, Kevin (2011) What do lower limb amputees think of their cosmesis? In: ISPO UK NMS Scientific Meeting and Exhibition, 2011-10-07 - 2011-10-08, W12 Conference Centre.

Cairns, Nicola Jeanne and Adam, Clayton and Pearcy, Mark and Smeathers, James (2011) Evaluation of modal analysis techniques using physical models to detect osseointegration of implants in transfemoral amputees. In: 2011 annual international conference of the IEEE engineering in medicine and biology society, EMBC. IEEE, New York, pp. 1600-1603. ISBN 9781424441211

Chang, Wenlong and Luo, X. and Ritchie, J.M. and Sun, J. and Mack, C. (2011) Laser deburring process for structured edges on precision moulds. International Journal of Nanomanufacturing, 7 (3-4). pp. 327-335. ISSN 1746-9392

Chang, Wenlong and Sun, J. and Luo, X. and Ritchie, J.M. and Mack, C. (2011) Investigation of microstructured milling tool for deferring tool wear. Wear, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Conde, A. and Munoz-Garcia, C. and Garcia, I. and Fuentes, G. G. and Almandoz, E. and Garcia, J. A. and Rodriguez, R. J. and Qin, Y. (2011) Nano-wear, nano-hardness and corrosion-resistance of electroplated nickel surfaces after co-implantation of Cr+ and N-2(+) ions. Surface and Coatings Technology, 205 (19). pp. 4447-4452. ISSN 0257-8972

Conway, Alastair and Ion, William (2011) Enhancing the design dialogue : a study of engineering design meetings. PhD thesis, UNSPECIFIED.

Carse, Bruce and Thomson, Avril and Stansfield, Ben (2011) A novel device for evaluating forces during the dynamic jar opening action—Do older and younger adults do things differently? Medical Physics, 33 (4). pp. 521-525. ISSN 0094-2405

Chang, Wenlong and Luo, X-C and Ritchie, J. M. and Sun, J.-N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 2041-2975

Coakley, James and Dye, David and Basoalto, Hector (2011) Creep and creep modelling of a multimodal nickel-base superalloy. Acta Materialia, 59 (3). 854–863. ISSN 1359-6454

Chan, K.Y. and Kwong, C.K. and Wong, T.C. (2011) Modelling customer satisfaction for product development using genetic programming. Journal of Engineering Design, 22 (1). pp. 55-68. ISSN 0954-4828

Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16.

Corney, Jonathan and Torres-Sanchez, Carmen and Jagadeesan, Ananda Prasanna and Yan, Xiu and Regli, W.C. and Medellin, H. (2010) Putting the crowd to work in a knowledge-based factory. Advanced Engineering Informatics, 24 (3). pp. 243-250. ISSN 1474-0346

Coakley, James and Basoalto, Hector and Dye, David (2010) Coarsening of a multimodal nickel-base superalloy. Acta Materialia, 58 (11). 4019–4028. ISSN 1359-6454

Carse, Bruce and Thomson, Avril and Stansfield, Ben (2010) Use of biomechanical data in the inclusive design process : packaging design and the older adult. Journal of Engineering Design, 21 (2-3). 289–303. ISSN 0954-4828

Chronakis, Ioannis S. and Mekras, Nikolaos D. and Wiesauer, Karin and Breuer, Eva and Stifter, David and Fuentes, Gonzalo F. and Qin, Yi (2010) MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 963-971. ISSN 0268-3768

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2009) An evolutionary algorithm for assembly job shop with part sharing. Computers and Industrial Engineering, 57 (3). pp. 641-651. ISSN 0360-8352

Coates, G. and Thompson, C. and Duffy, A.H.B. and Hills, W. and Whitfield, R.I. (2009) Modelling skill competencies in engineering companies. Engineering Designer. pp. 16-19.

Carse, Bruce and Thomson, Avril and Stansfield, Ben (2009) 3D wrist kinetics during jar and bottle opening in older adults. In: International Society of Biomechanics, XXII World Congress, 2009-07-05 - 2009-07-09.

Carse, Bruce and Thomson, Avril and Stansfield, Ben (2009) A novel device for measuring forces and moments during dynamic jar and bottle opening. In: International Society of Biomechanics, XXII World Congress, 2009-07-05 - 2009-07-09.

Carse, Bruce and Thomson, Avril and Stansfield, Ben (2009) Older adult requirement data - what designers want! In: Include 2009, 2009-04-06 - 2009-04-08.

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2009) The application of genetic algorithms to lot streaming in a job-shop scheduling problem. International Journal of Production Research, 47 (12). pp. 3387-3412. ISSN 0020-7543

Conway, Alastair and Ion, William and Lynn, Andrew (2009) Knowledge Enhanced Notes (KEN). In: International Conference on Engineering Design 2009, 2009-08-24 - 2009-08-27, Stanford University.

Corney, Jonathan R. and Torres-Sánchez, Carmen and Jagadeesan, A. Prasanna and Regli, William C. and Lynn, A. (2009) Outsourcing labour to the cloud. International Journal of Innovation and Sustainable Development, 4 (4). 294 - 313. ISSN 1740-8822

Chan, F. T. S. and Chung, S. H. and Wong, T. C. (2008) Scheduling of multi-site production problem with the machine maintenance by genetic algorithms. In: Proceedings of the 38th International Conference on Computers and Industrial Engineering. Publishing House Electronics Industry, pp. 2057-2061. ISBN 9787121074370

Chan, Felix T S and Wong, T. C. and Chan, P. L Y (2008) The application of lot streaming to assembly job shop under resource constraints. In: IFAC Proceedings Volumes (IFAC-PapersOnline). International Federation of Automatic Control (IFAC). ISBN 9783902661005

Chase, Scott (2008) Virtual worlds as collaborative environments for design and manufacturing. In: Virtual Worlds 2008, 2008-10-29. (Unpublished)

Chase, Scott C. (2008) Virtual worlds as collaborative environments for design and manufacturing : from idea to product. In: 2nd International Workshop on Virtual Manufacturing, published in 5th INTUITION International Conference, 2008-10-08.

Chase, Scott and Schultz, Ryan and Brouchoud, Jon (2008) Gather round the wiki-tree : virtual worlds as an open platform for architectural collaboration. In: ARCHITECTURE 'in computro'. eCAADe, Antwerp, pp. 809-815. ISBN 9780954118372

Cropper, S. and Ebers, M. and Huxham, C. and Haring, A.P. (2008) Handbook of interorganizational relations. Oxford Handbooks in Business and Management . Oxford, United Kingdom. ISBN 978-0-19-928294-4

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2008) Lot streaming for product assembly in job shop environment. Robotics and Computer Integrated Manufacturing, 24 (3). pp. 321-331. ISSN 0736-5845

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2008) A Genetic algorithm-based approach to job shop scheduling problem with assembly stage. In: 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008. IEEE, pp. 331-335. ISBN 9781424426294

Chan, F. T. S. and Chung, S. H. and Wong, T. C. (2008) Scheduling maintenance during production scheduling in multi-factory supply chain. In: ICQR 2007. Research Publishing Services, Singapore, pp. 176-181. ISBN 9789810594046

Conway, Alastair and Giess, M and Lynn, Andrew and Ding, L and Goh, Yee M and McMahon, Chris and Ion, William (2008) Holistic engineering design : a combined synchronous and asynchronous approach. In: ASME 2008 Design engineering technical conferences & computers and information in engineering conference, 2008-08-03 - 2008-08-06.

Conway, Alastair and Wodehouse, Andrew and Ion, William and Lynn, Andrew (2008) Specification of an information capture system to support distributed engineering design teams. In: Proceedings of International Conference on Advanced Design and Manufacture, 2008-01-14 - 2008-01-16.

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18.

Corney, J.R. and Torres-Sanchez, C. (2008) Towards functionally graded cellular microstructures. In: Smart Materials, Adaptive Structures and Intelligent Systems. ASME Conference Proceedings, 1 . ASME, pp. 45-53. ISBN 978-0-7918-4331-4

Conway, Alastair and Wodehouse, Andrew and Ion, William and Juster, Neal (2007) A study of information & knowledge generated during engineering design meetings. In: International Conference on Engineering Design (ICED), 2007-08-28.

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2007) Lot splitting under different job shop conditions. In: CEC 2007 IEEE Congress on Evolutionary Computation. IEEE, pp. 4722-4728. ISBN 9781424413393

Coates, G. and Duffy, A.H.B. and Hills, W. and Whitfield, I. (2007) A preliminary approach for modelling and planning the composition of engineering project teams. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (7). pp. 1255-1265. ISSN 2041-2975

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2006) Flexible job-shop scheduling problem under resource constraints. International Journal of Production Research, 44 (11). pp. 2071-2089. ISSN 0020-7543

Clark, D. and Corney, J.R. and Mill, F. and Rea, H. and Sherlock, A. and Taylor, N.K. (2006) Benchmarking shape signatures against human perceptions of geometric similarity. Computer-Aided Design, 38 (9). pp. 1038-1051. ISSN 0010-4485

Chan, F.T.S. and Wong, T.C. and Chan, L.Y. (2005) A genetic algorithm-based approach to machine assignment problem. International Journal of Production Research, 43 (12). pp. 2451-2472. ISSN 0020-7543

Chan, F. T. S. and Wong, T. C. and Chan, P. L. Y. (2005) Lot streaming technique in job-shop environment. In: Proceedings of the 13th Mediterranean Conference on Control and Automation. IEEE, Piscataway, New Jersey, pp. 364-369. ISBN 0780389360

Corney, J.R. and Hayes, C. and Sundararajan, V. and Wright, P. (2005) The CAD/CAM interface: a 25-year retrospective. Journal of Computing and Information Science in Engineering, 5 (3). pp. 188-197. ISSN 1530-9827

Chan, F. T. S. and Wong, T. C. and Chan, L. Y. (2004) Equal size lot streaming to job-shop scheduling problem using genetic algorithms. In: Proceedings of the 2004 IEEE International Symposium on Intelligent Control, 2004. IEEE, New York, pp. 472-476. ISBN 0780386353

Chen, X.S. and Qin, Yi and Balendra, Rajendram (2004) A new approach for optimisation of shrink-fitting of cold forging dies. Journal of Materials Processing Technology, 145. pp. 216-224. ISSN 0924-0136

Coates, Graham and Duffy, Alex H. B. and Whitfield, Ian and Hills, William (2004) Engineering management : operational design co-ordination. Journal of Engineering Design, 15 (5). pp. 433-446. ISSN 0954-4828

Common, M. and Ma, Y. and McGilvray, J.W. and Perman, R.J. (2003) Natural resources and environmental economics. 3rd edition. Prentice Hall, New York, USA. ISBN 0273655590

Cakar, Figen and Bititci, Umit S. and MacBryde, Jillian C. (2003) A business process approach to human resource management. Business Process Management Journal, 9 (2). pp. 190-207. ISSN 1463-7154

Coates, G. and Duffy, A.H.B. and Whitfield, I. and Hills, W. (2003) An integrated agent-oriented approach to real-time operational design coordination. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 17 (4). pp. 287-311. ISSN 0890-0604

Coates, G. and Duffy, A.H.B. and Whitfield, R.I. and Hills, W. (2003) Real-time co-ordinated resource management in a computational enviroment. In: 14th International Conference on Engineering Design (ICED '03), 2003-08-19 - 2003-08-21.

Coates, G. and Duffy, A.H.B. and Whitfield, R.I. and Hills, W. (2003) A methodology for prospective operational design co-ordination. In: 14th International Conference on Engineering Design (ICED '03), 2003-08-19 - 2003-08-21.

Coates, Graham and Duffy, Alex H.B. and Whitfield, R. Ian and Hills, Bill (2002) Operational design co-ordination : an agent based approach. In: Computer-based design. John Wiley & Sons Inc., pp. 205-214. ISBN 1860583725

Coates, G. and Ritchey, I. and Duffy, A.H.B. and Hills, W. and Whitfield, R.I. (2002) Integrated engineering environments for large complex products. Concurrent Engineering: Research and Applications, 8 (3). pp. 171-182. ISSN 1063-293X

Corney, Jonathan R. and Rea, Heather and Clark, Doug and Pritchard, John and Breaks, Michael and MacLeod, Roddy (2002) Course filters for shape matching. IEEE Computer Graphics and Applications, 22 (3). pp. 65-74. ISSN 0272-1716

Cakar, Figen and Bititci, Umit (2002) Modelling in the HRM business process. International Journal of Human Resources Development and Management, 2 (3/4). pp. 223-248.

Coates, G. and Duffy, A.H.B. and Whitfield, R.I. and Hills, W. and Sen, P. (2002) Real-time co-ordinated scheduling using a genetic algorithm. In: 5th International Conference on Adaptive Computing in Design and Manufacture, 2002-04-16 - 2002-04-18.

Corney, J.R. and Rea, H. and Clark, D. and Pritchard, J. and Breaks, M. and MacLeod, R. (2002) Part sourcing in a global market. Concurrent Engineering: Research and Applications, 10 (4). pp. 325-334. ISSN 1063-293X

Corney, J.R. and Rea, H. and Clark, D. and Pritchard, J. and Sung, R. (2002) ShapeSifter: a retrieval system for databases of 3D engineering data. New Review of Information Networking, 8 (1). pp. 33-54. ISSN 1361-4576

Coscia, E and Maiza, M and Gauberti, C and Arana, J.M. and Zufiaurre, M and Meo, F and Galassini, M and Leveaux, J.M. and Smithers, T and Bititci, Umit and Albores, P. and Martinez, V. (2002) K-FLOW : Knowledge management in the extended manufacturing enterprise. In: Proceedings of the 2002 ebusiness and eWork Conference, 2002-01-01.

Coates, G. and Duffy, A.H.B. and Hills, W. and Whitfield, R.I. (2000) A generic coordination approach applied to a manufacturing environment. Journal of Materials Processing Technology, 107 (1-3). pp. 404-411. ISSN 0924-0136

Coates, Graham and Whitfield, Robert Ian and Duffy, Alex H. B. and Hills, Bill (2000) Coordination approaches and systems - part II : an operational perspective. Research in Engineering Design, 12 (2). pp. 73-89. ISSN 0934-9839

Coates, G. and Duffy, A.H.B. and Whitfield, R.I. and Hills, W. (1999) A generic coordination methodology applied to a manufacturing enviroment. In: Proceedings of the 15th International Conference on Computer Aided Production Engineering (CAPE'99), 1999-04-19 - 1999-04-21.

Coates, G. and Duffy, A.H.B. and Whitfield, R.I. and Hills, W. (1999) A methodology for design coordination in a distributed computing environment. In: Proceedings of 12th International Conference on Engineering Design (ICED'99), 1999-08-24 - 1999-08-26.

Coates, G. and Hills, W. and Whitfield, R.I. and Duffy, A.H.B. (1999) Design coordination for enabling concurrent engineering. In: 6th ISPE International Conference on Concurrent Engineering, 1999-09-01 - 1999-09-03.

Coll, F and Carrie, Allan and Bititci, Umit and Reid, A and Trienenkens, J.H. and Hovlby, H.H. (1998) The implications of interrelationships for decision making processes in companies along the supply chain. In: Strategic management of the manufacturing value chain. International Federation for Information Processing . Kluwer Academic Publishers, pp. 411-419. ISBN 0412827107

Carrie, Allan and Bititci, Umit (1988) Tool management - a major challenge to integration. In: Proceedings of the 23rd European Conference on Production and Inventory Control, 1988-01-01.

D

Ding, Fei and Luo, Xichun and Zhong, Wenbin and Chang, Wenlong (2019) Design of a new fast tool positioning system and systematic study on its positioning stability. International Journal of Machine Tools and Manufacture, 142. pp. 54-65. ISSN 0890-6955

Ding, Fei and Luo, Xichun and Cai, Yukui (2019) Dynamics stiffness enhancement of fast tool servo by acceleration feedback. In: EUSPEN's 19th International Conference & Exhibition, 2019-06-03 - 2019-06-07.

Donaldson, Karen M. and Yan, Xiu T. (2019) A first simulation of soil-laser interaction investigation for soil characteristic analysis : simulation of soil-laser interaction investigation. Geoderma, 337. pp. 701-709. ISSN 0016-7061

Driggers, J. C. and Hall, E. D. and Hanson, J. and Hough, J. and Liu, J. and Smith, B. and Lockerbie, N. A. and Zhang, L., LIGO Scientific Collaboration (2019) Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO. Physical Review D, 99 (4). ISSN 1550-2368

Dominguez, Raul and Govindaraj, Shashank and Gancet, Jeremi and Post, Mark and Michalec, Romain and Oumer, Nassir and Wehbe, Bilal and Bianco, Alessandro and Fabisch, Alexander and Lacroix, Simon and De Maio, Andrea and Labourey, Quentin and Souvannavong, Fabrice and Bissonnette, Vincent and Smisek, Michal and Yan, Xiu (2018) A common data fusion framework for space robotics : architecture and data fusion methods. In: International Symposium on Artificial Intelligence, Robotics and Automation in Space Symposia, 2018-06-04 - 2018-06-06.

Dragut, Dumitru V. and Badilita, Viorel and Motoc, Adrian M. and Piticescu, Radu R. and Zhao, Jie and Hijji, Hasan and Conte, Luca (2017) Thermal stability and field assisted sintering of cerium-doped YSZ ceramic nanoparticles obtained via a hydrothermal process. Manufacturing Review, 4. ISSN 2265-4224

Ding, Fei and Luo, Xichun (2017) Measurement of spindle error motions by an improved multi-probe method. In: 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 2017-03-15 - 2017-03-16, Renishaw Innovation Centre.

Darwish Al Balushi, Ahmed and Rentizelas, Athanasios and Lopes de Sousa Jabbour, Ana Beatriz and Tuni, Andrea (2017) Introducing social sustainability aspects in supplier selection : the role of governmental intervention. In: 4th International EurOMA Sustainable Operations and Supply Chains Forum, 2017-02-27 - 2017-02-28, Politecnico di Milano.

de Camargo, José Alberto and Miranda Mendonça, Paulo Sérgio and Caldeira de Oliveira, Jorge Henrique and Chiappetta Jabbour, Charbel José and Lopes de Sousa Jabbour, Ana Beatriz (2017) Giving voice to the silent : a framework for understanding stakeholders’ participation in socially-oriented initiatives, community-based actions and humanitarian operations projects. Annals of Operations Research. ISSN 0254-5330

Duffy, Alex and Whitfield, Ian and Ion, Bill and Vuletic, Tijana (2016) Smart Products Through-Life : Research Roadmap. [Report]

Divis, Pavel and Mair, Gordon M. and Corney, Jonathan (2015) Desktop Scanner Metrology. In: Machine Vision and Mechatronics in Practice. Springer-Verlag, Berlin, pp. 323-335. ISBN 9783662455135

de Sousa Jabbour, Ana Beatriz Lopes and de Souza, Caroline Lombardi (2015) Oportunidades e desafios para lidar com as barreiras à adoção de práticas de green supply chain management : guidelines à luz de um estudo de múltiplos casos no Brasil. Gestão & Produção, 22 (2). pp. 295-310.

Devarajan, Nagarajan and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Heck, David P. and Siddiq, Muhammad Amir (2014) Complex incremental sheet forming using back die support on aluminium 2024, 5083 and 7075 alloys. Procedia Engineering, 81. 2298–2304. ISSN 1877-7058

Ding, Sheng and Ding, Rui and Yang, Erfu (2014) A filtering based recursive least squares estimation algorithm for pseudo-linear auto-regressive systems. Journal of the Franklin Institute, 351 (3). pp. 1801-1809. ISSN 0016-0032

Duffy, Alexander and Siska, Sonia and Imron, Tiffany (2013) The knowledge nugget. LAMBERT Academic Publishing, Glasgow. ISBN 9783659500909

Demoly, Frederic and Dutartre, Olivier and Yan, Xiu and Eynard, Benoit and Kiritsis, Dimitris and Gomes, Samuel (2013) Product relationships management enabler for concurrent engineering and product lifecycle management. Computers in Industry. ISSN 0166-3615

de Souza Freitas, Wesley Ricardo and Jabbour, Charbel José Chiappetta and Teixeira, Adriano Alves and de Sousa Jabbour, Ana Beatriz Lopes (2013) Gestão de recursos humanos e manufatura enxuta : evidências empíricas do setor automotivo brasileiro. Production, 24 (2). pp. 451-461. ISSN 0103-6513

de Souza Freitas, Wesley Ricardo and Jabbour, Charbel José Chiappetta and Teixeira, Adriano Alves and de Sousa Jabbour, Ana Beatriz Lopes (2013) Gestão de recursos humanos e manufatura enxuta : evidências empíricas do setor automotivo brasileiro. Production, 24 (2). pp. 451-461. ISSN 1980-5411

Du, Ankang and Yang, Gang and Lu, Dong and Qin, Yi and Yang, Yi (2013) Densification of MnZn ferrite sintered under multi-physical field coupling. Applied Mechanics and Materials, 271-272. pp. 212-217.

de Sousa Jabbour, Ana Beatriz Lopes and Filho, Alceu Gomes Alves and Viana, Adriana Backx Noronha and Jabbour, Charbel José Chiappetta (2013) Práticas de gestão da cadeia de suprimentos e seus eventuais relacionamentos com as prioridades competitivas da produção : evidências empíricas do setor eletroeletrônico à luz de modelagem de equações estruturais. Production, 23 (2). pp. 241-256. ISSN 1980-5411

de Sousa Jabbour, Ana Beatriz Lopes and de Souza Azevedo, Fernanda and Arantes, Ariana Fernandes and Jabbour, Charbel José Chiappetta (2013) Esverdeando a cadeia de suprimentos : algumas evidências de empresas localizadas no Brasil. Gestão & Produção, 20 (4). pp. 953-962.

Duffy, Alexander and Wodehouse, Andrew (2012) Preface. In: Proceedings of the 2nd International Conference on Design Creativity. The Design Society, Somerset, viii. ISBN 9781904670391

Deqiang, Yin and Peng, Xianghe and Qin, Yi and Wang, Zhongchang (2012) Impact of residual stress on adhesion and tensile fracture of TiN/CrN multilayered coatings from first principles. Physica E: Low-dimensional Systems and Nanostructures, 44 (9). pp. 1838-1845. ISSN 1386-9477

Dunham, A and Yan, X T and Grant, M H (2012) An investigation of the stiffness moduli of artificial bone materials. European Cells and Materials, 23 (Suppl ). p. 52. ISSN 1473-2262

Da Costa Mattos, Heraldo and Monteiro, Antonio and Palazzetti, Roberto (2012) Failure analysis of adhesively bonded joints in composite materials. Materials and Design, 33 (1). pp. 242-247. ISSN 0261-3069

Demoly, Frédéric and Yan, Xiu and Eynard, Benoît and Gomes, Samuel and Kiritsis, Dimitris (2012) Integrated product relationships management : a model to enable concurrent product design and assembly sequence planning. Journal of Engineering Design, 23 (7). pp. 544-561. ISSN 0954-4828

Deqiang, Yin and Peng, Xianghe and Qin, Yi and Wang, Zhongchang (2012) Adhesion, atomic structure and bonding variation in TiN/VN interface by chemical segregations. Surface and Interface Analysis. ISSN 0142-2421

Du, Ankang and Yang, Yi and Qin, Yi and Yang, Gang (2012) Effects of heating rate and sintering temperature on 316L stainless steel powders sintered under multi-physical field coupling. Materials and Manufacturing Processes, 28 (1). pp. 66-71.

Dremont, Nicolas and Graignic, Pascal and Troussier, Nadege and Whitfield, Robert and Duffy, Alexander (2011) A metric to represent the evolution of CAD/analysis models in collaborative design. In: International Conference in Engineering Design (ICED), 2011-08-15 - 2011-08-18.

Dunham, April and Yan, Xiu and Grant, Mary (2011) An investigation into the compatibility of 5 potential binders for the production of artificial bone scaffolds. In: The 6th UK and RI Postgraduate Conference in Biomedical Engineering and Medical Physics, 2011-08-14 - 2011-08-16. (Unpublished)

Deqiang, Yin and Peng, Xianghe and Qin, Yi and Wang, Zhongchang (2011) Prediction of residual stress in multilayered coatings with a linearly elastic model incorporating density functional theory calculations. Journal of Multiscale Modelling, 3 (1-2). pp. 65-78. ISSN 1756-9737

Demoly, F. and Yan, Xiu and Eynard, B. and Rivest, L. and Gomes, S. (2011) An assembly oriented design framework for product structure engineering and assembly sequence planning. Robotics and Computer Integrated Manufacturing, 27 (1). pp. 33-46. ISSN 0736-5845

Dunham, April and Yan, Xiu and Grant, Mary (2011) An investigation into the compatibility of 5 potential binders for the production of artificial bone scaffolds. In: British Toxicology Society Meeting, 2011-09-05 - 2011-09-06.

Durkin, Kevin and Conti-Ramsden, G and Walker, Allan (2011) Txt lang: texting, textism use and literacy abilities in adolescents with and without specific language impairment. Journal of Computer Assisted Learning, 27 (1). pp. 49-57. ISSN 0266-4909

Dai, Xiaojun and Qin, Yi and Ma, Lingxiao and Juster, Neil (2010) A knowledge-based design advisory system for collaborative design for micromanufacturing. International Journal of Advanced Manufacturing Technology, 47 (9). pp. 973-979. ISSN 0268-3768

D'Angelo, Alfredo and Warner, Karl (2010) Using the resource-based view to advance international entrepreneurship: an empirical review on how far we have come since Peng's 2001 predictions. In: Resources, Efficiency and Globalization: International Business in the Modern Era. Palgrave McMillan, Basingstoke, UK, pp. 294-309. ISBN 9780230236530

De Fence, Janine and Turner, Karen and Munday, Max (2010) Incorporating jurisdiction issues into an analysis of carbon attributable to Welsh final consumption under different economic conditions: an integrated IO and CGE analysis. In: 57th North American Regional Science Conference (NARSC). NARSC.

Ding, P.P. and Yang, Y. and Qin, Yi and Liu, J. and Yao, W.X. (2009) Study on optimization of isothermal forging process of Ti alloys. Forging and Stamping Technology, 34 (3). pp. 121-123. ISSN 1000-3940

Di Maio, Paola (2009) Common vocabularies for collective intelligence - work in progress. In: IEEE International Conference on Digital Ecosystems and Technologies (IEEE-DEST 2009), 2009-05-31 - 2009-06-03.

Dai, Xiaojun and Juster, Neal and Qin, Yi (2007) A web-based collaborative design advisory system for micro-product design assessment. In: 6th International Conference on e-Engineering and Digital Enterprise Technology e-ENGDET 2007, 2007-08-26 - 2007-08-29.

Dai, Xiaojun and Qin, Yi and Juster, Neal (2007) A web-based collaborative design advisory system for micro-product design assessment. Applied Mechanics and Materials, 10-12. pp. 220-224. ISSN 1660-9336

Duffy, Alex and Harries, Stefan and Marzi, Jochen and Petz, Christoph and Wu, Zichao DMEM, University of Strathclyde, UK, FRIENDSHIP SYSTEMS GmbH, Germany, HSVA, Germany, ZIB, Germany , ed. (2006) VIRTUE : integrating CFD ship design. In: 7th International Conference On Hydrodynamics, 2006-10-04 - 2006-10-06.

Dai, Xiaojun and Juster, Neal and Qin, Yi (2006) Development of a design advisory system for micro-manufacturing. In: Proceedings of the 9th International Conference on Material Forming ESAFORM 2006. Akapit, pp. 191-193. ISBN 8389541661

Deng, Guohong and Qin, Yi and Zheng, Zhengyu and Ma, Yanling and Lei, Gang and Wang, Guochao and Zhu, Gang (2006) Experimental study on rubber biaxial tensile tests. Proceedings of SPIE - The International Society for Optical Engineering, 6040. ISSN 0277-786X

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836

Duffy, M. and Burtney, E. (2003) I slept with 40 boys in three months: Teenage sexuality in the media: too much too young? In: Young People and Sexual Health: Social, Political and Individual Contexts. Palgrave McMillan. ISBN 0333993578

Duffy, A.H.B. and Sim, Siang K. (2003) Towards an ontology of generic engineering design activities. Research in Engineering Design, 14 (4). pp. 200-223. ISSN 0934-9839

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) The Influence of Oxide Film Defects on the Mechanical Strength of Al Castings. In: Proceedings of the European Metallurgy Conference, EMC 03, Hannover, Germany, 2003-01-01.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093

Duffy, A.H.B. (2002) Designing Design, invited paper from Polish Academy of Science. In: Design Methods that Work, 3rd International Workshop on Engineering design and Integrated Product Development, 2002-10-10 - 2002-10-12.

Dysko, A. and Burt, G.M. and McDonald, J.R. and Clark, J.E. (2001) Synthesis of harmonic distortion levels in an LV distribution network. IEEE Power Engineering Review, 21 (5). pp. 58-60. ISSN 0272-1724

Duffy, Alex H B and O'Donnell, F J (1999) A design research approach. In: Critical Enthusiasm. Norges teknisk‐naturvitenskapelige universitet, pp. 33-40. ISBN 82-91917-08-6

Duffy, A.H.B. and Ferns, A. F. (1998) An analysis of design reuse benefits. In: Proceedings of the 12th International Conference on Engineering Design (ICED '99). Design Society, pp. 799-804. ISBN 392297953X

Duffy, Alex H.B. and Smith, Joanne S. and Duffy, Sandra M. (1998) Design reuse research : a computational perspective. In: Engineering Design Conference on Design Reuse, 1998-06-23 - 1998-06-25.

Duffy, Alex H. B. and O'Donnell, Frank J. (1998) A model of product development performance. In: Designers. Springer, pp. 269-283. ISBN 9781447112686

Duffy, Alex H. B. (1997) The 'what' and 'how' of learning in design, invited paper. IEEE Intelligent Systems, 12 (3). pp. 71-76. ISSN 1541-1672

Duffy, A.H.B. and Persidis, A. and MacCallum, K.J. (1996) NODES - A numerical and object based modelling system for conceptual engineering design. Knowledge Based Systems, 9 (3). pp. 183-206. ISSN 0950-7051

Duffy, A.H.B. and Duffy, Sandra M. (1996) Learning for design reuse. International Journal on Artificial Intelligence for Engineering Design, Analysis and Manufacture, 10 (2). pp. 139-142. ISSN 0890-0604

Duffy, S. M. and Duffy, A.H.B. and MacCallum, K.J. (1995) A design reuse model. In: Proceedings of the International Conference on Engineering Design (ICED 95). Heurista, pp. 490-495. ISBN 3856930280

Duffy, A.H.B. and Andreasen, M.M. and MacCallum, K.J. and Reijers, L.N. (1993) Design co-ordination for concurrent engineering. Journal of Engineering Design, 4 (4). pp. 251-265. ISSN 0954-4828

Duffy, A.H.B. and Kerr, S.M. (1993) Customised pespectives of past designs from automated group rationalisations. Artificial Intelligence in Engineering, 8 (3). pp. 183-199. ISSN 0954-1810

E

Eze, Solomon and Ijomah, Winifred and Wong, Tse Chiu (2019) Accessing medical equipment in developing countries through remanufacturing. Journal of Remanufacturing. ISSN 2210-4690

Easton, David and Aylott, Chris and Shaw, Brian and Rahimi, Salah (2018) Residual stress in case hardened steel gears. In: American Gear Manufacturer Association Fall Technical Meeting 2018, 2018-09-24 - 2018-09-26, Chicago.

Easton, David and Perez, Marcos and Huang, Jianglin and Rahimi, Salah (2017) Effects of forming route and heat treatment on the distortion behaviour of case-hardened martensitic steel type S156. In: Heat Treat 2017, 2017-10-24 - 2017-10-26.

Elkaseer, AM and Dimov, SS and Pham, DT and Popov, KP and Olejnik, L and Rosochowski, A (2016) Material microstructure effects in micro-endmilling of Cu99.9E. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (7). pp. 1143-1155. ISSN 2041-2975

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C. (2016) Residual stress generations in brazed tungsten dissimilar joints. IEEE Transactions on Plasma Science, 44 (9). pp. 1-6. ISSN 0093-3813

Emhemed, Abdullah A.S. and Fong, Kenny and Fletcher, Steven and Burt, Graeme M. (2016) Validation of fast and selective protection scheme for an LVDC distribution network. IEEE Transaction on Power Delivery. pp. 1-8.

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C. (2016) Residual stress generation in tungsten-copper brazed joint using brazing alloy. In: Fusion Engineering (SOFE), 2015 IEEE 26th Symposium on. IEEE. ISBN 9781479982646

Evans, Dorothy (2015) Advanced manufacturing industrial doctorate centre : engineering doctorate students collaborating with industry within an academic and industrial environment. In: 18th International Conference on Engineering & Product Design Education, 2016-09-08 - 2016-09-09. (In Press)

Emhemed, Abdullah and Fong, Chung and Burt, Graeme (2014) Experimental validation of an advanced DC protection scheme for enabling an LVDC last mile distribution network. In: Top & Tail Annual Technical Review Meeting - November 2014, 2014-11-17 - 2014-11-18, UK.

Emhemed, Abdullah and Fong, Chung and Burt, Graeme (2014) Protecting the LVDC last mile : translating concepts to technologies. In: Top & Tail Annual Technical Review Meeting - November 2014, 2014-11-17 - 2014-11-18, UK.

Emhemed, Abdullah and Fong, Kenny and Burt, Graeme (2014) Multi-function DC protection scheme for an LVDC smart distribution network. In: HubNet Smart Grids Symposium 2014, 2014-09-09 - 2014-09-10.

Eipert, Irena and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Siddiq, Amir and Blackwell, Paul (2014) Improvement in ductility in commercially pure titanium alloys by stress relaxation at room temperature. Key Engineering Materials, 611-612. pp. 92-98. ISSN 1013-9826

Elkaseer, Ahmed and Bigot, Samuel and Surleraux, Anthony and Rosochowski, Andrzej (2013) Effect of material microstructure on the micro-EDM process. In: ICOMM 2013, 2013-03-25 - 2013-03-28.

El Saed, Tamer and Gurses, Ercan and Amir, Muhammad (2012) A phenomenological two-phase constitutive model for porous shape memor alloys. Computational Materials Science, 60. pp. 44-52. ISSN 0927-0256 (In Press)

Engelberg, Dirk and Rahimi, Salaheddin and Marrow, James (2010) Towards understanding the development of grain boundary clusters in austenitic stainless steel. Materials Science Forum, 638-642. pp. 3206-3211. ISSN 1662-9760

Eynard, Benoit and Yan, Xiu and Roucoules, Lionel (2010) Computer support for integrated design and manufacture engineering. International Journal of Manufacturing Research, 5 (4). pp. 393-395. ISSN 1750-0591

Ehsani, Ehsan and Chase, Scott C. (2009) Using virtual worlds as collaborative environments for innovation and design: lessons learned and observations from case studies in architectural projects. In: Computation: The New Realm of Architectural Design, Proceedings of the 27th Conference on Education in Computer Aided Architectural Design in Europe. eCAADe, Istanbul, pp. 523-531. ISBN 978-0-9541183-8-9

El Barky, Sahar Sobhy Sabry and Ion, William and El Sayed, A (2009) Application of reverse logistics for remanufacturing in the electro-mechanical sector. In: International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 2009, 2009-07-06 - 2009-07-08.

Eng, N.L. and Giess, M and Conway, Alastair and Bracewell, R. and Clarkson, P.J. and McMahon, C.A. and Ion, William (2008) Comparing and integrating methods of design activity documentation across synchronous and asynchronous modes of collaborative work. In: NordDesign, 2011-08-20.

Eynard, B. and Yan, X.T. (2008) Collaborative product development. Concurrent Engineering: Research and Applications, 16 (1). pp. 5-7. ISSN 1063-293X

F

Fleming, Christopher (2019) Oxidation‐led decomposition of hexagonal boron nitride coatings on alloy substrates at 900 °C : chromia‐formers. Materials and Corrosion-Werkstoffe und Korrosion, 70 (5). pp. 853-867. ISSN 0947-5117

Fleming, Christopher (2019) Oxidation‐led decomposition of hexagonal boron nitride coatings on alloy substrates at 900°C : Ti‐6Al‐4V. Materials and Corrosion-Werkstoffe und Korrosion. ISSN 0947-5117

Foster, Jim and Cullen, Crawford and Fitzpatrick, Stephen and Payne, Grant and Hall, Liza and Marashi, James (2018) Remanufacture of hot forging tools and dies using Laser Metal Deposition with powder and a hard-facing alloy Stellite 21®. Journal of Remanufacturing. ISSN 2210-4690

Fu, Shaowei and Cheng, Fang and Tjahjowidodo, Tegoeh and Yu, Zhou and Butler, David (2018) A non-contact measuring system for in-situ surface characterization based on laser confocal microscopy. Sensors, 18 (8). ISSN 1424-8220

Fei, Zixiang and Yang, Erfu and Li, David and Butler, Stephen and Ijomah, Winifred and Mackin, Neil (2018) Eigenface algorithm-based facial expression recognition in conversations - an experimental study. In: The 9th International Conference on Brain-Inspired Cognitive System​, 2018-07-07 - 2018-07-08, Guangcheng Hotel.

Fitzpatrick, Stephen (2018) Guest Editorial : Can additive manufacturing breathe new life into aging assets? Journal of Petroleum Technology, 70 (1). pp. 14-15. ISSN 0149-2136

Fei, Zixiang and Yang, Erfu and Hu, Huosheng and Zhou, Huiyu (2017) Review of machine vision-based electronic travel aids. In: ICAC 2017 - 2017 23rd IEEE International Conference on Automation and Computing. IEEE, Piscataway, N.J.. ISBN 9780701702618

Fei, Zixiang and Yang, Erfu and Li, David and Butler, Stephen and Ijomah, Winifred and Mackin, Neil (2017) A survey of the state-of-the-art techniques for cognitive impairment detection in the elderly. In: Advanced Computational Methods in Life System Modeling and Simulation - International Conference on Life System Modeling and Simulation, LSMS 2017 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2017, Pr. Communications in Computer and Information Science, 761 . Springer-Verlag, Berlin, pp. 143-161. ISBN 9789811063695

Furlan Matos Alves, Marcelo Wilson and Lopes de Sousa Jabbour, Ana Beatriz and Chiappetta Jabbour, Charbel Jose and Kannan, Devika (2017) Contingency theory, climate change, and low-carbon operations management. Supply Chain Management: An International Journal, 22 (3). pp. 223-236. ISSN 1359-8546

Falsafi, J. and Rosochowska, M. and Jadhav, P. and Tricker, D. (2017) Lower cost automotive piston from 2124/SiC/25p metal-matrix composite. In: SAE World Congress Experience, 2017-04-04 - 2017-04-06, Cobo Center.

Falsafi, Javad and Demirci, Emrah and Silberschmidt, Vadim (2016) Computational assessment of residual formability in sheet metal forming processes for sustainable recycling. International Journal of Mechanical Sciences, 119. pp. 187-196. ISSN 0020-7403

Falsafi, Javad and Demirci, Emrah (2016) Micro-Indentation based study on steel sheet degradation through forming and flattening : toward a predictive model to assess cold recyclability. Materials and Design, 109. pp. 456-465. ISSN 0261-3069

Fahnenmüller, Lennart and Wodehouse, Andrew (2016) Approaches to joint problem-solving in multi-disciplinary distributed teams. In: 18th International Conference on Engineering and Product Design Education, 2016-09-08 - 2016-09-09.

Fallahi, N. and Nardoni, G. and Palazzetti, R. and Zucchelli, A. (2016) Pattern recognition of acoustic emission signal during the mode I fracture mechanisms in carbon- epoxy composite. In: 32nd European Conference on Acoustic Emission Testing 2016, 2016-09-07 - 2016-09-09.

Fallahi, N. and Nardoni, G. and Heidary, H. and Palazzetti, R. and Yan, X.T. and Zucchelli, A. (2016) Supervised and non-supervised AE data classification of nanomodified CFRP during DCB tests. FME Transactions, 44 (4). pp. 415-421. ISSN 2406-128X (In Press)

Farouk, M. and Mohamed, M. (2016) A review on formability prediction and constitutive damage models of sheet forming of magnesium alloys. In: 17th International Conference on Applied Mechanics and Mechanical Engineering, 2016-04-19 - 2016-04-21, Military Technical College.

Feng, Jiling and Qin, Yi and Dong, Hanshan (2016) Investigation into initiation and propagation of cracks in the coated surfaces of spur gears with submodelling and irreversible cohesive-zone modelling techniques. Manufacturing Rev., 3. ISSN 2265-4224

Farrugia, Philip and Borg, Jonathan and Wodehouse, Andrew and Grierson, Hilary and Kovacevic, Ahmed and Balazs, Vidovics (2016) Experiments with augmented reality for supporting education in distributed product design solution evaluation. In: International Conference on Augmented Reality for Technical Entrepreneurs (ARTE’16), 2016-04-01 - 2016-04-02.

Fletcher, Steven and Fong, Chung Man and Norman, Patrick and Galloway, Stuart and Burt, Graeme (2015) High speed differential protection system for aircraft dc distribution systems incorporating solid state circuit breaking capability. In: SAE 2015 AeroTech Congress & Exhibition, 2015-09-22 - 2015-09-24.

Feng, Jiling and Qin, Yi and Dong, Hanshan (2015) Investigation of the initiation and propagation of cracks in the coated surface of spur gear : an application of irreversible cohesive zone model. In: 4th International Conference on New Forming Technology (ICNFT 2015). MATEC Web of Conferences . EDP Sciences. ISBN 9782759818235

Fuentes, Gonzalo G. and Almandoz, Eluxka and Rodríguez, Rafael J. and Dong, Hanshan and Qin, Yi and Mato, Sonia and Pérez-Trujillo, Francisco Javier (2014) Vapour deposition technologies for the fabrication of hot-forming tools : a review. Manufacturing Rev., 1. pp. 1-17.

Feng, Jiling and Qin, Yi (2013) Load bearing capacity investigation and coating failure mechanism for coated spur gears. Applied Mechanics and Materials, 446-447. pp. 491-496. ISSN 1660-9336

Farrell, Mark and Riches, Philip (2012) The Poisson’s ratio of the nucleus pulposus is strain dependent. In: 18th Congress of the European Society of Biomechanics, 2012-07-01 - 2012-07-04.

Feng, Jiling and Qin, Yi and Raghavan, Rejin and Michler, J and Almandoz, E. and Fuentes, G.G. (2012) New technique for determining the critical loads of a thin coating on a tool–steel substrate by considering the initiation of cracks in the coating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (7). pp. 1205-1212. ISSN 2041-2975

Farrell, Mark and Riches, Philip (2012) Poisson’s ratio of nucleus pulposus tissue : comparison of experimental results with a biphasic poroviscoelastic finite element model. In: Euromech 534 Colloquium: Advanced experimental approaches and inverse problems in tissue biomechanics, 2012-05-29 - 2012-05-31.

Feng, Jiling and Qin, Yi and Lorusso, Massimo and Ugues, Daniele (2012) Prediction of the critical load of a metal-rolling system by considering the damage of the coated surface. In: Proceedings of the 14th International Conference on Metal Forming. Steel Research International . Wiley-VCH Verlag GmbH & Co. KGaA, pp. 1059-1062.

Feng, J.L. and Qin, Yi and Koodakal, R.R. and Michler, J. (2011) Effect of the plasticity of the substrate on the performance of the coating on a tool. In: ICTP 2011. Proceedings of the 10th International Conference on Technology of Plasticity. Stahleisen, pp. 1259-1264. ISBN 9783514007840

Feng, J. and Qin, Y. and Zeng, Q. and Almandoz, E. and Fuente, G. and Dong, H. and Raghavan, R. and Michler, J. (2011) Parameterised FE modelling of the surface-systems with coatings which considers the cracking of the coatings and influences of the case-hardening of the substrate. Journal of Multiscale Modelling, 3 (1-2). ISSN 1756-9737

Feng, J.L. and Lorusso, M and Qin, Yi and Ugues, D and Khan, R and Dong, Hanshan and Almandoz, Eluxka and Fuentes, G. G. (2011) Coated surfaces in static line contact : numerical simulation and experimental validation. In: IFHTSE2011, 2011-10-03.

Feng, J.L. and Qin, Yi and Koodakal, R.R. and Michler, J (2011) A new technique to investigate the load-bearing capacity of a coating on tool steel. In: he 22nd International Conference on Computer-Aided Production Engineering (CAPE2011), 2011-04-11.

Feng, J.L. and Yin, Deqiang and Zeng, Quanren and Qin, Yi (2011) A generic model for the analysis of the failures of multilayered coatings on tools and engineering components. In: IFHTSE2011, 2011-10-03.

Feng, Q. and Antony, J. (2010) Integrating DEA into Six Sigma methodology for measuring health service efficiency. Journal of the Operational Research Society, 61 (7). pp. 1112-1121. ISSN 0160-5682

Fuentes, G.G. and Diaz de Cerio, M.J. and Garcia Alvarez, Joaquin and Martinez, R. and Bueno, R and Rodriguez, R.J and Rico, M and Montala, F and Qin, Yi (2009) CrCN cathodic arc PVD coatings. Thin Solid Films, 517 (20). pp. 5894-5899. ISSN 0040-6090

Fuentes, G.G. and Díaz de Cerio, M.J. and García, J.A. and Martínez, R. and Bueno, R. and Rodríguez, R.J. and Rico, M. and Montalá, F. and Qin, Yi (2008) Gradient Cr(C,N) cathodic arc PVD coatings. Surface and Coatings Technology, 203 (5-7). pp. 670-674. ISSN 0257-8972

Fuentes, G.G. and Diaz de Cerio, M.J. and Rodriguez, R and Avelar-Batista, J.C. and Spain, E and Housden, J and Qin, Yi (2006) Investigation on the sliding of aluminium thin foils against PVD-coated carbide forming-tools during micro-forming. Journal of Materials Processing Technology, 177 (1-3). pp. 644-648. ISSN 0924-0136

Farrugia, P. and Borg, J. and Yan, X.T. and Camilleri, K. and Green, G. (2006) A sketching alphabet for paper-based collaborative design. Journal of Design Research, 6 (1-2). pp. 260-288. ISSN 1748-3050

Farrugia, P. and Borg, J. and Camilleri, K. and Giannini, F. and Yan, X.T. (2005) Extracting 3D shape models and related life knowledge from paper-based sketches. International Journal of Computer Applications in Technology, 23 (2/3/4). pp. 120-137. ISSN 0952-8091

Ferrier, G. and Macklin, J.T. and Neill, S.P. and Folkard, A.M. and Copeland, G.J.M. and Anderson, J.M. (2005) Cover: Observing estuarine currents and fronts in the Tay Estuary, Scotland, using an airborne SAR with along track interferonmetry (ATI). International Journal of Remote Sensing, 26 (20). pp. 4399-4404. ISSN 0143-1161

Felgen, L and Grieb, J and Lindemann, U and Pulm, U and Chakrabarti, Amaresh and Annamalai Vasantha, Gokula Vijayumar (2004) The impact of cultural aspects on the design process. In: Design 2004. University of Zagreb, Zagreb, pp. 1475-1480. ISBN 9536313596

Forbes, G.A. and Fleming, D.A. and Duffy, A.H.B. and Ball, P.D. (2003) The optimisation of a strategic business process. In: Twentieth International Manufacturing Conference, 2003-09-03 - 2003-09-05.

Fleming, D.A. and Forbes, G.A. and Hayfron, L.E. and Duffy, A.H.B. and Ball, P.D. (2003) The optimisation of the estimating and tendering process in warship refit - a case study. In: Proceedings of 18th International Conference on Computer Aided Production Engineering (CAPE'03). Elsevier, Edinburgh, United Kingdom. ISBN 0030392003

Filer, D. and Pattison, J.D. and Anderson, W.G. and Gettinby, G. and Anderson, J.M. (1981) Reproducibility of leukocyte migration from agarose microdroplets. Journal of Clinical and Laboratory Immunology, 5 (3). pp. 185-189.

G

Guo, Xiaoguang and Shi, Yutong and Luo, Xichun and Kang, Renke and Jin, Zhuji and Ding, Fei and Li, Zhipeng (2019) Mechanism of crack propagation for K9 glass. International Journal of Precision Engineering and Manufacturing, 20 (5). pp. 815-825. ISSN 1229-8557

Gao, Ke and Song, Jia and Yang, Erfu (2019) Stability analysis of the high-order extended state observers for a class of nonlinear control systems. Transactions of the Institute of Measurement and Control. ISSN 0142-3312 (In Press)

Gao, Fei and Liu, Aidong and Liu, Kai and Yang, Erfu and Hussain, Amir (2019) A novel visual attention method for target detection from SAR images. Chinese Journal of Aeronautics. ISSN 1000-9361

Gao, Fei and Huang, Teng and Sun, Jinping and Hussain, Amir and Yang, Erfu and Zhou, Huiyu (2019) A novel semi-supervised learning method based on fast search and density peaks. Complexity, 2019. pp. 1-23. ISSN 1076-2787

Gao, Fei and Ma, Fei and Wang, Jun and Sun, Jinping and Yang, Erfu and Zhou, Huiyu (2018) Semi-supervised generative adversarial nets with multiple generators for SAR image recognition. Sensors (Switzerland), 18 (8). ISSN 1424-8220

Gomez Gallegos, Ares Argelia and Mandal, Paranjayee and Gonzalez, Diego and Zuelli, Nicola and Blackwell, Paul (2018) Studies on titanium alloys for aerospace application. Defect and Diffusion Forum, 385. pp. 419-423. ISSN 1662-9507

Gao, Fei and Yue, Zhenyu and Wang, Jun and Yang, Erfu and Hussain, Amir (2018) Novel semi-supervised classification method based on class certainty of samples. In: The 9th International Conference on Brain-Inspired Cognitive System​, 2018-07-07 - 2018-07-08, Guangcheng Hotel.

Gao, Fei and Huang, Teng and Sun, Jinping and Wang, Jun and Hussain, Amir and Yang, Erfu (2018) A new algorithm of SAR image target recognition based on improved deep convolutional neural network. Cognitive Computation. ISSN 1866-9964

Gao, Fei and Yang, Yue and Wang, Jun and Sun, Jinping and Yang, Erfu and Zhou, Huiyu (2018) A deep convolutional generative adversarial networks (DCGANs)-based semi-supervised method for object recognition in synthetic aperture radar (SAR) images. Remote Sensing, 10 (6). ISSN 2072-4292

Greenland, Steve and Ireland, Murray and Kobayashi, Chisato and Mendham, Peter and Post, Mark and White, David (2018) Development of a minaturised forwards looking imager using deep learning for responsive operations. In: 4S Symposium 2018. ESA, Noordwijk.

Gao, Fei and Huang, Teng and Wang, Jun and Sun, Jinping and Yang, Erfu and Hussain, Amir (2018) Combining deep convolutional neural network and SVM to SAR image target recognition. In: 2017 IEEE International Conference on Internet of Things, IEEE Green Computing and Communications, IEEE Cyber, Physical and Social Computing, IEEE Smart Data, iThings-GreenCom-CPSCom-SmartData 2017. IEEE, Piscataway, NJ., pp. 1082-1085. ISBN 9781538630655

Gao, Fei and You, Jialing and Wang, Jun and Sun, Jinping and Yang, Erfu and Zhou, Huiyu (2017) A novel target detection method for SAR images based on shadow proposal and saliency analysis. Neurocomputing, 267. pp. 220-231. ISSN 0925-2312

Gomez-Gallegos, A. and Mill, F. and Mount, A. R. and Duffield, S. and Sherlock, A. (2017) 3D multiphysics model for the simulation of electrochemical machining of stainless steel (SS316). International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Gao, Fei and Ma, Fei and Wang, Jun and Sun, Jinping and Yang, Erfu and Zhou, Huiyu (2017) Visual saliency modeling for river detection in high-resolution SAR imagery. IEEE Access, 6. pp. 1000-1014. ISSN 2169-3536

Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058

Greenland, Steve and Ireland, Murray and Kobayashi, Chisato and Mendham, Peter and White, David and Crowther, Bill and Kabbabe, Khris and Post, Mark (2017) System framework for autonomous data processing onboard next generation of nanosatellite. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.

Gomez-Gallegos, A. A. and Farrell, M. and Zuelli, N. and Staiano, A. (2017) A comparative study assessing the wear behaviour of different ceramic die materials during superplastic forming. Materials Science and Engineering Technology, 48 (10). pp. 983-992. ISSN 0933-5137

Gao, Fei and Yue, Zhenyu and Wang, Jun and Sun, Jinping and Yang, Erfu and Zhou, Huiyu (2017) A novel active semisupervised convolutional neural network algorithm for SAR image recognition. Computational Intelligence and Neuroscience, 2017. pp. 1-8. ISSN 1687-5273

Govinderaj, Shashank and Gancet, Jeremi and Post, Mark and Dominguez, Raul and Souvannavong, Fabrice and Lacroix, Simon and Smisek, Michal and Hidalgo-Carrio, Javier and Wehbe, Bilal and Fabisch, Alexander and De Maio, Andrea and Oumer, Nassir and Bissonnette, Vincent and Marton, Zoltan-Csaba and Kottath, Sandeep and Nissler, Christian and Yan, Xiu and Triebel, Rudolph and Nuzzolo, Francesco (2017) InFuse : a comprehensive framework for data fusion in space robotics. In: 14'th ESA Symposium on Advanced Space Technologies in Robotics and Automation, 2017-06-20 - 2017-06-22.

Gao, Fei and Huang, Teng and Wang, Jun and Sun, Jinping and Hussain, Amir and Yang, Erfu (2017) Dual-branch deep convolution neural network for polarimetric SAR image classification. Applied Sciences, 7 (5). ISSN 2076-3417

Gao, Fei and Xue, Xiangshang and Wang, Jun and Sun, Jinping and Hussain, Amir and Yang, Erfu (2016) Visual attention model with a novel learning strategy and its application to target detection from SAR images. In: Advances in Brain Inspired Cognitive Systems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) . Springer-Verlag, Cham, Switzerland, pp. 149-160. ISBN 9783319496849

Gomez-Gallegos, A.A. and Mill, F. and Mount, A.R. (2016) Surface finish control by electrochemical polishing in stainless steel 316 pipes. Journal of Manufacturing Processes, 23. pp. 83-89. ISSN 1526-6125

Guan, Chaoliang and Hu, Hao and Tie, Guipeng and Luo, Xichun (2016) A new process chain for ultra-precision machining potassium dihydrogen phosphate (KDP) crystal parts. In: Proceedings of the 16 International Conference of the European Society for Precision Engineering and Nanotechnology. euspen, Bedford, pp. 449-450. ISBN 9780956679086

Gao, Fei and Lv, Wenchao and Zhang, Yaotian and Sun, Jinping and Wang, Jun and Yang, Erfu (2016) A novel semisupervised support vector machine classifier based on active learning and context information. Multidimensional Systems and Signal Processing. ISSN 0923-6082

Gzyl, Michal and Rosochowski, Andrzej and Boczkal, Sonia and Olejnik, Lech and Katimon, Mohd Nizam (2016) Producing high-strength metals by I-ECAP. Advanced Engineering Materials, 18 (2). pp. 219-223. ISSN 1527-2648

Gzyl, Michal and Rosochowski, Andrzej and Boczkal, Sonia and Qarni, Muhammad Jawad (2015) The origin of fracture in the I-ECAP of AZ31B magnesium alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 5275-5284. ISSN 1073-5623

Garcia, D. and Palazzetti, R. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2015) Vibration-based delamination diagnosis and modelling for composite laminate plates. Composite Structures, 130. pp. 155-162. ISSN 0263-8223

Gamage, J.R. and Ijomah, W.L. and Windmill, J. (2015) What makes cleaning a costly operation in remanufacturing. In: Proceedings, 11th Global Conference on Sustainable Manufacturing. Technical University of Berlin, Berlin, pp. 219-223. ISBN 9783798326095

Giuliese, G. and Palazzetti, R. and Moroni, F. and Zucchelli, A. and Pirondi, A. (2015) Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres. Composites Part B: Engineering, 78. pp. 384-392. ISSN 1359-8368

Gao, Fei and Mei, Jingyuan and Sun, Jinping and Wang, Jun and Yang, Erfu and Hussain, Amir (2015) A novel classification algorithm based on incremental semi-supervised support vector machine. PLOS One, 10 (8). ISSN 1932-6203

Gao, Fei and Zhang, Ye and Wang, Jun and Sun, Jinping and Yang, Erfu and Hussain, Amir (2015) Visual attention model based vehicle target detection in synthetic aperture radar images : a novel approach. Cognitive Computation, 7 (4). pp. 434-444. ISSN 1866-9964

Gzyl, Michal and Rosochowski, Andrzej and Boczkal, Sonia and Olejnik, Lech (2015) The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP. Materials Science and Engineering: A, 638. ISSN 0921-5093

Gao, Fei and Mei, Jingyuan and Sun, Jinping and Wang, Jun and Yang, Erfu and Hussain, Amir (2015) Target detection and recognition in SAR imagery based on KFDA. Journal of Systems Engineering and Electronics. ISSN 1004-4132 (In Press)

Golinski, J. and Olejnik, L. and Rosochowski, A. (2015) Kształtowanie przyrostowe wielofunkcyjnych pakietów blaszanych do tłoczenia. Prace Naukowe Politechniki Warszawskiej Mechanika, 267. pp. 149-154. ISSN 0137-2335

Grierson, H.J. and Corney, J.R. and Hatcher, Gillian (2015) Using visual representations for the searching and browsing of large, complex, multimedia data sets. International Journal of Information Management, 35 (2). pp. 244-252. ISSN 0268-4012

Gzyl, Michal and Pesci, Raphaël and Rosochowski, Andrzej and Boczkal, Sonia and Olejnik, Lech (2015) In situ analysis of the influence of twinning on the strain hardening rate and fracture mechanism in AZ31B magnesium alloy. Journal of Materials Science, 50 (6). pp. 2532-2543. ISSN 0022-2461

Goel, Saurav and Luo, Xichun and Agrawal, Anupam and Reuben, Robert L. (2015) Diamond machining of silicon : a review of advances in molecular dynamics simulation. International Journal of Machine Tools and Manufacture, 88. pp. 131-164. ISSN 0890-6955

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Qarni, Muhammad Jawad and Olejnik, Lech (2015) Determination of friction factor by ring compression testing and FE analysis. Computer Methods in Materials Science, 15 (1). pp. 156-161. ISSN 1641-8581

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Olejnik, Lech (2014) Microstructure evolution in AZ31B magnesium alloy subjected to tension. In: 6th International Conference on Nanomaterials by Severe Plastic Deformation, 2014-06-30 - 2014-07-04, The Arsenal. (Unpublished)

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Olejnik, Lech and Pesci, Raphael (2014) Improving mechanical properties of magnesium alloy by incremental equal angular pressing (ECAP). In: 1st International Conference of Non-Ferrous Metals, ICNFM 2014, 2014-06-04 - 2014-06-06. (Unpublished)

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Olejnik, Lech and Reshetov, Aleksey (2014) The effect of initial grain size on formability of AZ31B magnesium alloy during I-ECAP. Key Engineering Materials, 611-612. pp. 573-580. ISSN 1013-9826

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Olejnik, Lech and Yakushina, Evgenia and Wood, Paul (2014) Mechanical properties and microstructure of AZ31B magnesium alloy processed by I-ECAP. Metallurgical and Materials Transactions A, 45 (3). pp. 1609-1620. ISSN 1073-5623

Goel, Saurav and Bin Rashid, Waleed and Luo, Xichun and Agrawal, Anupam and Jain, V. K. (2014) A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide. Journal of Manufacturing Science and Engineering, 136 (2). ISSN 1528-8935

Gijo, E. V. and Antony, Jiju and Kumar, Maneesh and McAdam, Rodney and Hernandez, Jose Luis (2014) An application of Six Sigma methodology for improving the first pass yield of a grinding process. Journal of Manufacturing Technology Management, 25 (1). pp. 125-135. ISSN 1741-038X

Gijo, E. V. and Antony, Jiju and Kumar, Maneesh and McAdam, Rodney and Hernandez, Jose Luis (2014) An application of six sigma methodology for improving the first pass yield of a grinding process. In: UNSPECIFIED.

Giuliese, G. and Pirondi, A. and Furlotti, E. and Zucchelli, A. and Palazzetti, R. (2014) Virtual assessment of a composite laminate with interleaved nanofibrous mat under impact loading. In: 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM. ISBN 9780000000002

Goel, Saurav and Faisal, Nadimul Haque and Luo, Xichun and Yan, Jiwang and Agrawal, Anupam (2014) Nanoindentation of polysiliocn and single crystal silicon : molecular dynamics simulation and experimental validation. Journal of Physics D: Applied Physics, 47 (27). ISSN 0022-3727

Goel, Saurav and Yan, Jiwang and Luo, Xichun and Agrawal, Anupam (2014) Incipient plasticity in 4H-SiC during qusistatic nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials, 34. pp. 330-337. ISSN 1751-6161

Goel, Saurav and Stukowski, Alexander and Luo, Xichun and Agrawal, Anupam and Reuben, Robert L (2013) Anisotropy of single crystal 3C-SiC during nanometric cutting. Modelling and Simulation in Materials Science and Engineering, 21 (6). ISSN 0965-0393

Grierson, Hilary (2013) Detailed empirical studies of student information storing in the context of distributed design team-based project work. Design Studies, 34 (3). 378–405. ISSN 0142-694X

Goel, Saurav and Luo, Xichun and Comley, Paul and Reuben, Robert L and Cox, Andrew (2013) Brittle-ductile transition during diamond turning of single crystal silicon carbide. International Journal of Machine Tools and Manufacture, 65. pp. 15-21. ISSN 0890-6955

Goel, S. and Luo, X. and Reuben, R.L. (2013) Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process. Tribology International, 57 (Januar). pp. 272-281. ISSN 0301-679X

Govea-Valladares, E. and Medellin-Castillo, H. I. and Fletcher, C. and Lim, Theodore and Yan, Xiu and Ritchie, J. and Arnez, Victor and Hernandez, Ernesto (2013) Idealising mesh modelling for haptic enabled services and operands. In: Proceedings of the 37th international Matador conference. Springer, London, pp. 93-96. ISBN 9781447144809

Gzyl, Michal Zbigniew and Rosochowski, Andrzej (2013) FE simulation of magnesium alloy microstructure evolution in tension. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 2014-01-06.

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Milenin, Andrzej and Olejnik, Lech (2013) Modelling microstructure evolution during equal channel angular pressing of magnesium alloys using cellular automata finite element method. Computer Methods in Materials Science, 13 (2). pp. 357-363. ISSN 1641-8581

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Yakushina, Evgenia and Olejnik, Lech and Wood, Paul (2013) Mechanical properties of AZ31B magnesium alloy processed by I-ECAP. In: Magnesium Workshop Madrid 2013, 2013-05-21 - 2013-05-24. (Unpublished)

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Yakushina, Evgenia and Wood, Paul and Olejnik, Lech (2013) Route effects in I-ECAP of AZ31B magnesium alloy. Key Engineering Materials, 554-557. pp. 876-884. ISSN 1013-9826

Goel, S. and Stukowski, A. and Goel, G. and Luo, X. and Reuben, R.L. (2012) Nanotribology at high temperatures. Beilstein Journal of Nanotechnology, 3 (1). pp. 586-588.

Goel, Saurav and Luo, Xichun and Stukowski, Alexander and Reuben, Robert L. (2012) Influence of nanoparticle coolant and crystal structure of the workpiece during nanometric cutting of silicon carbide. In: 12th euspen International Conference, 2012-06-04 - 2012-06-08.

Goel, Saurav and Luo, Xichun and Reuben, Robert L and Pen, Hongmin (2012) Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon. Wear, 284-285 (25 Apr). pp. 65-72. ISSN 0043-1648

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. (2012) Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon. Materials Letters, 68 (1 Febr). pp. 507-509. ISSN 0167-577X

Goel, S. and Luo, X. and Reuben, R.L. (2012) Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide. Computational Materials Science, 51 (1). pp. 402-408. ISSN 0927-0256

Gijo, E. V. and Antony, Jiju and Hernandez, Jose Luis and Scaria, Johny (2012) Reducing patient waiting time in a pathology department using the Six Sigma methodology. Leadership in Health Services, 26 (4). pp. 253-267. ISSN 1751-1879

Goel, Saurav and Luo, Xichun and Reuben, Robert L (2012) Shear instability of nanocrystalline silicon carbide during nanometric cutting. Applied Physics Letters, 100. ISSN 0003-6951

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W. Bin and Sun, J. N. (2011) Simulation study of cutting forces, stresses and temperature during nanometric cutting of single crystal silicon. In: Key Engineering Materials. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 223-228. ISBN 9783037852972

Gijo, E. V. and Scaria, Johny and Antony, Jiju (2011) Application of six sigma methodology to reduce defects of a grinding process. Quality and Reliability Engineering International, 27 (8). pp. 1221-1234. ISSN 0748-8017

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. and Sun, J. (2011) Single point diamond turning of single crystal silicon carbide : molecular dynamic simulation study. In: Key Engineering Materials. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 150-155. ISBN 9783037852972

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. (2011) Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting. Nanoscale Research Letters, 6. pp. 1-9. ISSN 1931-7573

Garengo, Patrizia and Ates, Aylin and Bititci, Umit (2011) The strategy focused face of SMEs. In: The New Faces of Organizations in the 21st Century. NAISIT Publishers. ISBN 9780986533518

Grierson, Hilary (2011) A set of nine principles for distributed-design information storing. Design Principles and Practices, 5 (3). pp. 607-624. ISSN 1833-1874

Grierson, Hilary and Ion, William (2010) Towards Principles and Project Memories for Distributed-Design Information Storing in Engineering Design Education. PhD thesis, UNSPECIFIED.

Grierson, Hilary and Ion, William (2009) Towards a set of principles and guidelines for distributed-design information storing. In: ICED 09. The Design Society, Glasgow, pp. 87-98. ISBN 9781904670124

Grierson, Hilary and Wodehouse, Andrew and Breslin, Caroline and Ion, William and Nicol, David and Juster, Neal (2008) An evaluation study of a digital library of ideas : Workflow Model and classroom use. International Journal on Digital Libraries, 9 (1). pp. 29-39. ISSN 1432-5012

Giess, M and Conway, Alastair and McMahon, C.A. and Ion, William (2008) The integration of synchronous and asynchronous design activity records. In: International Design Conference - DESIGN 2008, 2011-08-20.

Geissdöfer, S. and Rosochowski, A. and Olejnik, L. and Engel, U. and Richert, M. (2008) Micro-extrusion of ultrafine grained copper. International Journal of Material Forming, 1 (Suppl ). pp. 455-458. ISSN 1960-6206

Gatchell, S. and Whitfield, R.I. and Duffy, A.H.B. and Abt, C. (2008) Coupling CAD and CFD codes within a virtual integration platform. In: Marine CFD 2008: International Conference on Marine Computational Dynamics, 2008-03-26 - 2008-03-27.

Geissdörfer, S. and Rosochowski, A. and Olejnik, L. and Engel, U. (2008) Micro-extrusion of an ultrafine grained copper can. Proceedings of the 4th International Conference on Multi-Material Micro Manufacture . Whittles Publishing, Dunbeath. ISBN 978-1904445-76-0

Grierson, Hilary and Ion, William (2008) Distributed design information and knowledge : storage and strategy. In: International Conference on Engineering and Product Design Education 2008, 2008-09-04 - 2008-09-05.

Glesk, I. and Huang, Y. K. and Brès, C. S. and Prucnal, P. R. (2007) Improving transmission privacy using optical layer XOR. In: Conference on Lasers and Electro-Optics, 2007, CLEO 2007. UNSPECIFIED. ISBN 9781557528346

Garengo, P. and Nudurupati, Sai and Bititci, Umit (2007) Understanding the relationship between PMS and MIS in SMEs : the key role of organizational development. Computers in Industry, 58 (7). pp. 677-686. ISSN 0166-3615

Gu, Dongbing and Yang, Erfu (2007) Fuzzy policy reinforcement learning in cooperative multi-robot systems. Journal of Intelligent and Robotic Systems, 48 (1). pp. 7-22. ISSN 0921-0296

Garengo, Patrizia and Bititci, Umit (2007) Towards a contingency approach to performance measurement: an empirical study in Scottish SMEs. International Journal of Operations and Production Management, 27 (8). ISSN 0144-3577

Glesk, I. and Huang, Y. K. and Brès, C. S. and Prucnal, P. R. and Curtis, T. H. and Kwong, W. C. (2007) Optical approach to avionic platforms based on OCDMA. In: OFC/NFOEC 2007 - Optical Fiber Communication and the National Fiber Optic Engineers Conference 2007. UNSPECIFIED. ISBN 9781557528315

Grierson, H. and Ion, W. and Juster, N. (2006) Project memories: documentation and much more for global team design. In: International Engineering and Product Design Education Conference, 2006-09-07 - 2006-09-08.

Grierson, H. and Wodehouse, A. and Breslin, C. and Ion, W. and Juster, N. (2006) Building a design engineering digital library : the workflow issues. In: Engineering and Product Design Education Conference, 2006-09-07 - 2006-09-08.

Geddes, C.D. and Vandijk, P. and McArthur, S.D.J. and Metcalfe, W. and Jager, K. and Zwinderman, A. and Mooney, M. and Fox, J. and Simpson, K.H. (2006) The ERA-EDTA cohort study—comparison of methods to predict survival on renal replacement therapy. Nephrology Dialysis Transplantation, 21 (4). pp. 945-956. ISSN 0931-0509

Grierson, H. and Wodehouse, A. and Ion, W. and Juster, N.P. (2005) Supporting reflection and problem-based learning through the use of LauLima. In: 3rd Engineering and Product Design Education International Conference, 2005-09-15 - 2005-09-16.

Gu, Dongbing and Yang, Erfu (2005) Fuzzy policy gradient reinforcement learning for leader-follower systems. In: 2005 IEEE International Conference on Mechatronics & Automations. IEEE, Piscataway, NJ., pp. 1557-1561. ISBN 078039044X

Gu, Dongbing and Yang, Erfu (2005) A suboptimal model predictive formation control. In: 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems. IEEE, Piscataway, NJ., pp. 1295-1300. ISBN 0780389123

Garengo, P. and Biazzo, S. and Bititci, U. (2005) Performance measurement systems in SMEs : a review and a research agenda. International Journal of Management Reviews, 7 (1). pp. 25-47. ISSN 1460-8545

Grierson, Hilary (2004) The Internet as a tool for communication in design projects. Centre for Education in the Built Environment Transactions, 1 (2). pp. 77-90. ISSN 1745-0322

Grierson, H. and Nicol, D. and Littlejohn, A. and Wodehouse, A. (2004) Structuring and sharing information resources to support concept development and design learning. In: Network Learning Conference, 2004-04-05 - 2004-04-07.

Garengo, Patrizia and Bititci, Umit (2004) Performance measurement in SMEs : an empirical study in Scottish companies. In: conference of the Performance Measurement Association, 2004-07-28. (Unpublished)

Grant, P.M. and Harrison, C.S. and Conway, B.A. (2004) Wheelchair simulation. In: Designing a more inclusive world. Cambridge workshops on universal access and assistive technology . Springer, London, pp. 101-109. ISBN 978-1-4471-1046-0

Gu, Dongbing and Yang, Erfu (2004) A policy gradient reinforcement learning algorithm with fuzzy function approximation. In: IEEE International Conference on Robotics and Biomimetics, 2004. ROBIO 2004. IEEE, Piscataway, NJ., pp. 936-940. ISBN 0780386148

Grant, P.M. and Conway, B.A. and Harrison, C.S. (2003) VR in the service of people with special needs. Include 2003: the practice of inclusive design. In: Include 2003: the practice of inclusive design, 2003-03-25 - 2003-03-28.

Guo, X. and Li, R. and Lin, C. and Qin, Y. and Balendra, R. (2001) Development of an integrated CAD/CAM system for design and manufacture of spiral bevel and hypoid gears. In: Advances in Manufacturing Technology XV. Wiley, pp. 231-236. ISBN 1860583253

Grierson, H. and Littlejohn, A. (2001) Embedding information and communication technologies into the 21st century curriculum. In: Computers in Art and Design Education Conference, 2001-04-09 - 2001-04-12.

Grierson, H. (2000) The use of Internet technologies in delivering CPD, continuing professional development. Continuing Professional Development, 3 (6). pp. 191-200. ISSN 1460-7468

Grierson, H. (1999) Continuing professional development and new technologies. [Report]

Guan, X. and MacCallum, K.J. and Duffy, A.H.B. (1997) Prototype system for supporting the incremental modelling of vague geometric configurations. International Journal on Artificial Intelligence for Engineering Design, Analysis and Manufacture, 11 (4). pp. 287-310. ISSN 0890-0604

Gettinby, G. and Connolly, P.J. and Anderson, J.M. (1981) Immunological assays for Celiac-disease. Lancet, 1 (8230). p. 1156. ISSN 0140-6736

H

Huang, Yanli and Hou, Jie and Yang, Erfu (2019) General decay anti-synchronization of multi-weighted coupled neural networks with and without reaction-diffusion terms. Neural Computing and Applications. ISSN 0941-0643

Hou, Jie and Huang, Yanli and Yang, Erfu (2019) Finite-time anti-synchronization of multi-weighted coupled neural networks with and without coupling delays. Neural Processing Letters. pp. 1-28. ISSN 1370-4621

Hou, Jie and Huang, Yanli and Yang, Erfu (2019) ψ-type stability of reaction–diffusion neural networks with time-varying discrete delays and bounded distributed delays. Neurocomputing, 340. pp. 281-293. ISSN 0925-2312

Hay, Laura and Duffy, Alexander and Grealy, Madeleine (2019) The novelty perspectives framework : a new conceptualisation of novelty for cognitive design studies. In: ICED19, 2019-08-05 - 2019-08-08. (In Press)

Hendry, Linda Caroline and Stevenson, Mark and MacBryde, Jill and Ball, Peter and Sayed, Maysara and Liu, Lingxuan (2018) Local food supply chain resilience to constitutional change : the Brexit effect. International Journal of Operations and Production Management. ISSN 0144-3577

Hatcher, G. and Ion, W. and MacLachlan, R. and Marlow, M. and Simpson, B. and Wilson, N. and Wodehouse, A. (2018) Using linkography to compare creative methods for group ideation. Design Studies, 58. pp. 127-152. ISSN 0142-694X

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Wodehouse, Andrew and Simpson, Barbara and Marlow, Marion (2018) Applied humour in creative product design. In: Creativity and Humour. Explorations in Creativity Research . Elsevier, London, pp. 157-182. ISBN 9780128138021

Holliman, Alexander and Thomson, Avril and Hird, Abigail (2018) Planning product design & development : resource-influencing factors based on experience. In: 25th International Annual EurOMA Conference, 2018-06-24 - 2018-06-27.

Hallawi, Huda and Mehnen, Jörn and He, Hongmei (2018) A comparison of resource allocation process in grid and cloud technologies. Journal of Physics: Conference Series, 1032 (1). ISSN 1742-6588

Hasan, Rashed Md. Murad and Luo, Xichun (2018) Promising lithography techniques for next generation logic devices : a review. Nanomanufacturing and Metrology. ISSN 2520-8128

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Sheridan, Marion and Simpson, Barbara and Wodehouse, Andrew (2018) Evolving improvised ideation from humour constructs : a new method for collaborative divergence. Creativity and Innovation Management, 27 (1). pp. 91-101. ISSN 0963-1690

Huang, Jianglin and Slater, Carl D. and Mandral, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207. pp. 478-483. ISSN 1877-7058

Hassan, Bilal and Corney, Jonathan (2017) Grain boundary precipitation in Inconel 718 and ATI 718Plus. Materials Science and Technology, 33 (16). pp. 1879-1889. ISSN 0267-0836

Hasan, Rashed Md. Murad and Luo, Xichun (2017) Nanolithography : status and challenges. In: 23rd International Conference on Automation and Computing (ICAC). IEEE, Piscataway, NJ.. ISBN 9780701702601

Hassan, Bilal and Jansen, Yann and Nouveau, Sebastien and Corney, Jonathan (2017) Effect of strain hardening on precipitation kinetics in ATI 718Plus. Materials Science Forum, 907. pp. 167-172. ISSN 1662-9760

He, Yang and Geng, Yanquan and Yan, Yongda and Luo, Xichun (2017) Fabrication of nanoscale pits with high throughput on polymer thin film using AFM tip-based dynamic plowing lithography. Nanoscale Research Letters, 12. ISSN 1931-7573

Hay, Laura and Duffy, Alexander (2017) Is it sustainable? A conceptual exposition of sustainability in technical artefacts. In: Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 5. ICED Conference Proceedings . Design Society, Glasgow. ISBN 978-1-904670-93-3

Hay, Laura and Duffy, Alex H. B. and McTeague, Chris and Pidgeon, Laura M. and Vuletic, Tijana and Grealy, Madeleine (2017) A systematic review of protocol studies on conceptual design cognition : design as search and exploration. Design Science, 3.

Ho, Siu Fai and Thomson, Avril and Kerr, Andrew (2017) Development of the FIRST system : feedback Integrated Rehabilitation for Sit-to-stand Training – design, feasibility and usability. In: International Neurorehabilitation Symposium 2017, 2017-07-17 - 2017-07-20, QE2 Centre.

Ho, Siu Fai and Thomson, Avril and Kerr, Andrew (2017) The validation of a therapeutic feedback generation system for evaluating the sit-to-stand performance in stroke survivors. In: British Society of Rehabilitation Medicine Annual Conference 2017, 2017-07-18 - 2017-07-19, QE2 Centre.

He, Hongmei and Watson, Tim and Maple, Carsten and Mehnen, Jörn and Tiwari, Ashutosh (2017) A new semantic attribute deep learning with a linguistic attribute hierarchy for spam detection. In: 2017 International Joint Conference on Neural Networks (IJCNN). IEEE, Piscataway, NJ. ISBN 9781509061822

Hird, Abigail (2017) Externalising, sharing and comparing perceptions in design. In: Design Management Academy. Design Management Academy, London, pp. 1361-1371. ISBN 978-1-912294-11-4

Hatcher, Gillian (2017) Innovation through humour techniques. In: Strath Wide Researcher Conference 2017, 2017-05-30 - 2017-05-30, Strathclyde.

Hay, Laura and Duffy, Alex H. B. and McTeague, Christopher and Pidgeon, Laura M. and Vuletic, Tijana and Grealy, Madeleine (2017) Towards a shared ontology : a generic classification of cognitive processes in conceptual design. Design Science, 3.

Hatcher, Gillian and Borgianni, Yuri (2017) Similarities and differences between humorous and surprising products. In: Proceedings of the 21th International Conference on Engineering Design (ICED 17). ICED . The Design Society, Glasgow. (In Press)

Heredia Jimenez, Juan Antonio and Whitfield, Robert and Ward, Michael and Grierson, Hilary (2017) The development of a novel standardisation-customisation continuum. In: ICED17, 21st International Conference on Engineering Design, 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada.. (In Press)

Huang, Jian-Feng and Wang, Zhong-Lai and Yang, Er-Fu and McGlinchey, Don and Luo, Yuan-Xin and Li, Yun and Chen, Yi (2017) Molecular dynamics simulation of persistent slip bands formation in nickel-base superalloys. International Journal of Automation and Computing, 14 (1). pp. 68-79. ISSN 1476-8186

Hay, Laura (2017) Creative design engineering : introduction to an interdisciplinary approach. [Review]

Hay, L. and Duffy, A. H. B. and Whitfield, R. I. (2017) The S-Cycle performance matrix : supporting comprehensive sustainability performance evaluation of technical systems. Systems Engineering, 20 (1). pp. 45-70. ISSN 1520-6858

Ho, Siu Fai and Thomson, Avril and Kerr, Andrew (2016) A feasibility study of the FIRST system : feedback integrated rehabilitation for sit-to-stand training. In: UK Stroke Forum Conference 2016, 2016-11-28 - 2016-11-30, ACC Liverpool.

Hatcher, G. and Ion, W. and MacLachlan, R. and Wodehouse, A. and Simpson, B. and Sheridan, M. (2016) Design ideation through improvised comedy processes. In: 4th International Conference on Design Creativity (ICDC 2016), 2016-11-02 - 2016-11-04, Georgia.

Ho, Siu Fai and Kerr, Andrew and Thomson, Avril (2016) The development and evaluation of a sensor-fusion and adaptive algorithm for detecting real-time upper trunk kinematics, phases and timing of the sit-to-stand movements in stroke survivors. In: ICSAE Conference 2016, 2016-10-20 - 2016-10-21, Great North Museum: Hancock.

Hijji, Hasan and Qin, Yi and Huang, Kunlan and Bin Zulkipli, Muhammad and Yang, Song and Zhao, Jie (2016) Forming alumina (Al2O3) by micro-FAST. In: Advances in Manufacturing Technology XXX. Advances in Transdisciplinary Engineering, 3 . IOS Press, Amsterdam, pp. 61-66. ISBN 978161499668

Hijji, Hasan and Qin, Yi and Huang, Kunlan and Yang, Song and Bin Zulkipli, Muhammad and Zhao, Jie (2016) Fabrication of micro components with MSZ material using electrical-field activated powder sintering technology. In: Advances in Manufacturing Technology XXX. Advances in Transdisciplinary Engineering, 3 . IOS Press, Amsterdam, pp. 55-60. ISBN 978161499668

Hay, Laura and McTeague, Christopher and Duffy, Alex H. B. and Pidgeon, Laura M. and Vuletic, Tijana and Grealy, Madeleine (2016) A systematic review of protocol studies on conceptual design cognition. In: 7th International Conference on Design Computing and Cognition, 2016-06-27 - 2016-06-29.

Hird, Abigail and Kreiling, Laura (2016) Expert judgement in resource forecasting : insights form the application of the Delphi method. In: 23rd EurOMA Conference, 2016-06-19 - 2016-06-22, Norwegian University of Science and Technology (NTNU).

Hird, Abigail and Kreiling, Laura (2016) Expert judgement in resource forecasting – the use of the Delphi method to achieve group consensus. In: Proceedings of the 16th International Conference on Group Decision & Negotiation. Western Washington University, Washington.

Hird, Abigail and Kreiling, Laura (2016) Expert judgement in resource forecasting : insights from the application of the Delphi method. In: 23rd EurOMA Conference, 2016-06-19 - 2016-06-22, Norwegian University of Science and Technology (NTNU).

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Wodehouse, Andrew and Sheridan, Marion and Simpson, Barbara (2016) Humour processes for creative engineering design. In: 14th International Design Conference (Design), 2016-05-16 - 2016-05-19, Hotel Croatia Cavtat.

Hao, Guangbo and Hand, Ronan and Kong, Xianwen and Chang, Wenlong and Luo, Xichun (2015) Design of compliant parallel grippers using the position space concept for manipulating submillimeter objects. In: IEEE 15th International Conference in Automation and Computing (ICAC'15), 2015-09-11 - 2015-09-12.

Huang, Kunlan and Qin, Yi and Zhao, Jie and Bin Zulkipli, Muhammad and Hijji, Hasan (2015) Fabrication of NiTi shape memory alloy by Micro-FAST. In: 4th International Conference on New Forming Technology (ICNFT 2015). MATEC Web of Conferences . EDP Sciences. ISBN 9782759818235

Ho, Siu Fai and Thomson, Avril and Kerr, Andrew (2015) The development of a diagnostic platform for the functional evaluation of the sit-to-stand movement in stroke survivors. In: IEEE EMBS UKRI Postgraduate Conference on Biomedical Engineering and Medical Physics, 2014-07-14 - 2015-07-16, University of Liverpool.

Hay, Laura and Duffy, Alex and Whitfield, Ian (2015) Generic models of technical systems sustainability. PhD thesis, UNSPECIFIED.

Harris, Ross (2015) A study into existing issues and potential improvements in IR automotive Remanufacturing. In: International Conference on Remanufacturing (ICoR 2015), 2015-06-14 - 2015-06-16, RAI Amsterdam.

Ho, Siu Fai and Thomson, Avril and Kerr, Andrew (2015) Computerised rehabilitation system for sit-to-stand training in stroke survivors : engaging the users in the design process. In: The Society of Research in Rehabilitation Summer 2015 Conference, 2015-06-09 - 2015-06-09, St. James Park.

Huang, Kunlan and Yang, Yi and Qin, Yi and Yang, Gang and Yin, Deqiang (2015) A new densification mechanism of copper powder sintered under an electrical field. Scripta Materialia, 99. pp. 85-88. ISSN 1359-6462

Huang, Kun-Lan and Yang, Yi and Yin, De-Qiang and Yang, Xian-Zhi and Qin, Yi (2015) Micro-FAST 成形过程中电流大小对 颗粒变形的影响. Xiyou Jinshu Cailiao Yu Gongcheng, 44 (2). pp. 365-369. ISSN 1002-185X

Hird, Abigail and Mendibil, Kepa and Duffy, Alexander and Whitfield, Robert Ian (2015) New product development resource forecasting. R&D Management. ISSN 0033-6807

Huang, Kunlan and Yang, Yi and Qin, Yi and Yang, Gang and Yin, Deqiang (2014) Sintering thermodynamics of fields activated microforming and sintering technology for fabricated MnZn ferrite microparts. Journal of Microelectromechanical Systems, 23 (6). pp. 1389-1395. ISSN 1057-7157

Huang, Kunlan and Yang, Yi and Qin, Yi (2014) Sintering kinetics of the powder during fields-activated micro-forming and sintering (Micro-FAST) of copper micro-gears. In: Metal Forming 2014. Key Engineering Materials, 622-623 . Trans Tech Publications Ltd, Pfaffikon, Switzerland, pp. 854-860. ISBN 9783038351931

Huang, Kunlan and Qin, Yi and Yang, Yi (2014) Effect of particle size on densification of copper powder during electric-field activated sintering for micro-scale forming. In: Advances in Manufacturing Technology XXVIII. Southampton Solent University, Southampton. ISBN 9780992695842

Hatcher, G.D. and Ijomah, W.I. and Windmill, J.F.C. (2014) A network model to assist ‘design for remanufacture’ integration into the design process. Journal of Cleaner Production, 64. pp. 244-253. ISSN 0959-6526

Harrison, Claire Louise and Thomson, Avril and Cutts, S and Rowe, Philip and Riches, Philip (2014) Research synthesis of recommended acetabular cup orientations for total hip arthroplasty. Journal of Arthroplasty, 29 (2). 377–382. ISSN 1532-8406

Hay, Laura and Duffy, Alex and Whitfield, R. I. (2014) The sustainability cycle and loop : models for a more unified understanding of sustainability. Journal of Environmental Management, 133. pp. 232-257. ISSN 0301-4797

Huang, Kunlan and Yang, Yi and Qin, Yi and Gang, Yang (2013) Densification behavior of copper powder during the coupled multi-physics fields-activated microforming. International Journal of Advanced Manufacturing Technology, 69 (9-12). pp. 2651-2657. ISSN 0268-3768

Huang, Kunlan and Qin, Yi and Yin, Deqiang and Yang, Yi and Yang, Gang (2013) Fabrication of binder-free ultrafine WC-6Co composites by coupled multi-physical fields activation technology. In: Advances in Manufacturing Technology XXVII. Cranfield University Press, Cranfield, pp. 369-374. ISBN 9781907413230

Harrison, Claire and Thomson, Avril and Cutts, Steven and Rowe, Philip and Riches, Philip E. (2013) Research synthesis of recommended acetabular cup orientations for total hip arthroplasty. In: XXIV Congress of the International Society of Biomechanics, 2013-08-04 - 2013-08-09. (Unpublished)

Hatcher, Gillian and Ijomah, Winifred and Windmill, James (2013) Design for remanufacturing in China : a case study of electrical and electronic equipment. Journal of Remanufacturing, 3. ISSN 2210-4690

Hatcher, G. D. and Ijomah, W. L. and Windmill, J. F C (2013) Integrating design for remanufacture into the design process : the operational factors. Journal of Cleaner Production, 39. pp. 200-208. ISSN 0959-6526

Huang, Kunlan and Yang, Yi and Qin, Yi and Yang, Gang (2013) 316L stainless steel powder densification during the coupled multi-fields activated micro-forming. Materials and Manufacturing Processes, 28 (2). pp. 183-188.

Hussain, Amir and Abdullah, Rudwan and Yang, Erfu and Gurney, Kevin (2012) An intelligent multiple-controller framework for the integrated control of autonomous vehicles. In: Advances in Brain Inspired Cognitive Systems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) . Springer Berlin/Heidelberg, Berlin, pp. 92-101. ISBN 9783642315602

Hird, Abigail and Duffy, Alex H. B. and Mendibil, Kepa (2012) An empirical approach to resource forecasting in NPD. In: 19th International Annual EurOMA Conference, 2012-07-01 - 2012-07-05.

Hussain, Romana and Lockett, Helen and Annamalai Vasantha, Gokula Vijayumar (2012) A framework to inform PSS conceptual design by using system-in-use data. Computers in Industry, 63 (4). pp. 319-327. ISSN 0166-3615

Hatcher, Gillian D and Ijomah, Winifred L and Windmill, James FC (2012) Design for remanufacture : organisational factors influencing successful integration into the design process. In: Design for Innovative Value Towards a Sustainable Society. Springer Netherlands, Dordrecht, pp. 419-423. ISBN 9789400730106

Hatcher, G. D. and Ijomah, W. L. and Windmill, J. F. C. (2011) Design for remanufacture : a literature review and future research needs. Journal of Cleaner Production, 19 (17-18). pp. 2004-2014. ISSN 0959-6526

Hatcher, Gillian and Ijomah, Winifred and Windmill, James (2011) Integration of remanufacturing issues into the design process. In: ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. The Design Society, pp. 259-264. ISBN 9781904670254

Hartl, Christoph and Anyasodor, Gerald Njiribeako and Lungershausen, Joern (2011) Formability of micro‐tubes in hydroforming. In: 14TH International ESAFORM Conference on Material Forming: ESAFORM 2011 Proceedings. AIP Conference Proceedings . AIP. ISBN 9780735409118

Hussain, Romana and Lockett, Helen and Annamalai Vasantha, Gokula Vijayumar (2011) Industry practices and challenges in using product in use data to inform PSS conceptual design. In: Functional thinking for value creation. Springer Berlin Heidelberg, Berlin, pp. 242-247. ISBN 9783642196881

Harrison, C. S. and Grant, P. M. and Conway, B. A. (2010) Enhancement of a virtual reality wheelchair simulator to include qualitative and quantitative performance metrics. Assistive Technology: The Offical Journal of RESNA, 22 (1). pp. 20-31. ISSN 1040-0435

Hernandez, Jose Luis and Turner, Trevor (2010) Implementing Six Sigma in Challenging Times : A Case Study. In: Advances in Production Management Systems. New Challenges, New Approaches. IFIP Advances in Information and Communication Technology . Springer, Berlin, pp. 514-521. ISBN 9783642163579

Huang, Y-F. and Inigo, A. R. and Chang, C-C. and Li, K-C. and Liang, C-F. and Chang, C-W. and Lim, T-S. and Chen, S-H. and White, J. D. and Jeng, U-S. and Su, A-C. and Huang, Y-S. and Peng, K-Y. and Chen, S-A. and Pai, W-W. and Lin, C-H. and Tameev, A. R. and Novikov, S. V. and Vannikov, A. V. and Fann, W-S. (2008) Nanostructure-dependent vertical charge transport in MEH-PPV films [correction]. Advanced Functional Materials, 18 (22). p. 3550. ISSN 1616-301X

Harrison, C.S. and Mair, G. M. (2007) A mechatronic approach to supernormal auditory localisation. Mechatronics, 17 (9). pp. 501-510. ISSN 0957-4158

Harrison, C.S. and Mair, G.M. (2007) Experiments in binaural audio for telepresence. FP6 Project PEACH.

Harris, H. and Bititci, Umit (2005) The importance of moral values to the effectiveness of networking in manufacturing and maintenance. New Engineer, 8 (1). pp. 5-10.

Harrison, C.S. and Grant, P.M. and Dall, P.M. and Conway, B.A. (2005) Wheelchair navigation within virtual reality simulations of the built environment using haptic feedback. In: 12th Annual Scientific Meeting of the Institute of Physics and Engineering in Medicine, 1900-01-01.

Herbert, Nicholas and Simpson, David and Spence, William D. and Ion, William (2005) A preliminary investigation into the development of 3D printing of prosthetic sockets. Journal of Rehabilitiation Research and Development, 42 (2). pp. 141-146. ISSN 0748-7711

Huang, Junping and Peng, Xianghe and Qin, Yi (2005) 春回和內時本構模型二次收益分析. Chinese Journal of Applied Mechanics, 22 (2). pp. 180-183. ISSN 1000-4939

Harrison, Colin S. and Grant, P.M. and Conway, Bernard A. (2004) Haptic interfaces for wheelchair navigation in the built environment. Presence: Teleoperators and Virtual Environments, 13 (5). pp. 520-534. ISSN 1054-7460

Harrison, C.S. (2004) Integrated Tracking and Audio for Transparent Telepresence. PhD thesis, UNSPECIFIED.

Haffey, M. and Duffy, A.H.B. (2003) Design process performance management support. In: Proceedings of the 14th International Conference on Engineering Design (ICED 03). The Design Society.

Haffey, M.D. and Duffy, A.H.B. (2001) Modelling performance behaviour. In: 1st International Workshop on Performance Measurement, 2001-05-24 - 2001-05-25.

Haffey, Mark K. D. and Duffy, Alex H. B. (2001) Process performance measurement support : a critical analysis. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

Haffey, Mark and Duffy, Alex (2000) Knowledge data discovery and data mining in a design environment. In: Workship Series on Knowledge Intensive CAD, IFIP WG5.2, 2000-05-22 - 2000-05-24.

Harrison, C.S. and Mair, G.M. (1999) Mechatronics applied to auditory localisation for telepresence. Mechatronics, 9 (7). pp. 803-816. ISSN 0957-4158

Harrison, C.S. and Mair, G.M. (1998) A mechatronic approach to auditory localisation for telepresence. In: Proceedings of Mechatronics 1998. IMechE, pp. 817-822. ISBN 0-08-040009-1

Hayfron, Lee and Carrie, A.S. and Bititci, Umit and Pandya, K.V. (1998) Manufacturing franchising and enterprise networks. In: Strategic management of the manufacturing value chain. International Federation for Information Processing . Kluwer Academic Publishers, pp. 315-322. ISBN 0412827107

Hayfron, Lee and Carrie, Allan and Bititci, Umit and Pandya, K.V. (1998) Manufacturing franchising - a route to agility. In: EurOMA 1998, 1998-01-01.

Hayfron, Lee and Carrie, Allan and Bititci, Umit and Pandya, K.V. (1998) Manufacturing franchising : transferring the service experience. In: Responsiveness in Manufacturing, IEE Workshop, 1998-01-01.

Harrison, C.S. and Twist, R.J. and Hon, K.K.B. (1990) Simulation of the effects of uncertainty and its effects on production planning lead times. In: 6th International Conference on Computer Aided Production Engineering, 1990-11-01.

Harrison, C.S. and Gowland, T. and Dove, L.G. and Makin, B.M. (1988) A practical approach to CIM systems design. In: 4th International Conference on Computer Aided Production Engineering. Professional Engineering Publishing, pp. 91-98. ISBN 0852986823

I

Ibrahim, Ali Labaran and Hird, Abigail and Whitfield, Robert Ian (2018) Using LSP network position to share supply chain risk information. In: British Academy of Management Conference Proceedings 2018. British Academy of Management, London. ISBN 978-0-9956413-1-0

Ismail, F.B. and Vorontsov, V.A. and Lindley, T.C. and Hardy, M.C. and Dye, D. and Shollock, B.A. (2017) Alloying effects on oxidation mechanisms in polycrystalline Co–Ni base superalloys. Corrosion Science, 116. pp. 44-52. ISSN 0010-938X

Ijomah, W.L. and Danis, M. (2012) Refurbishment and re-use of WEEE. In: Waste Electrical and Electronic Equipment (WEEE) Handbook. Woodhead Publishing Ltd, Cambridge, pp. 145-162. ISBN 9780857090898

Ingold, Tim and Anusas, Mike and Vergunst, Jo, Lee and Wade, Rebecca (2010) Designing environments for life : policy and practice. University of Strathclyde, Glasgow.

Ingold, Tim and Anusas, Mike and Clarke, Jennifer and Harkness, Rachel (2010) Designing Environments for Life : A Meeting of Art, Anthropology and Design. [Show/Exhibition]

Ijomah, Winifred (2010) The application of remanufacturing in sustainable manufacture. Proceedings of the ICE- Waste and Resource Management, 163 (4). pp. 157-163. ISSN 1747-6526

Ijomah, Winifred and Chiodo, J.D. (2010) Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products. International Journal of Sustainable Engineering, 3 (4). 246 - 257. ISSN 1939-7038

Ijomah, Winifred (2009) Addressing decision making for remanufacturing operations and design-for-remanufacture. International Journal of Sustainable Engineering, 2 (2). pp. 91-102. ISSN 1939-7038

Ijomah, W.L. (2008) A tool to improve training and operational effectiveness in remanufacturing. International Journal of Computer Integrated Manufacture, 21 (6). pp. 676-701. ISSN 0951-192X

Ijomah, Winifred L. and Newman, Stephen (2007) A reference model to verify and optimize remanufacturing operations. In: The 4th International Conference on Digital Enterprise Technology (DET 2007), 2007-09-19 - 2007-09-21. (Unpublished)

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Development of robust design-for-remanufacturing guidelines to further the aims of sustainable development. International Journal of Production Research, 45 (18-19). pp. 4513-4536. ISSN 0020-7543

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Enhancing product remanufacturability through design. In: 5th International Conference on Design and Manufacture for Sustainable Development, 2007-07-10 - 2007-07-11. (Unpublished)

Ijomah, Winifred L. and McMahon, Christopher A. and Hammond, Geoffrey P. and Newman, Stephen T. (2007) Development of a robust remanufacturing definition. In: 17th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2007), 2007-06-18 - 2007-06-20. (Unpublished)

Ijomah, W.L. and Childe, S.J. (2007) A model of the operations concerned in re-manufacture. International Journal of Production Research, 45 (24). pp. 5857-5880. ISSN 0020-7543

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Development of design for remanufacturing guidelines to support sustainable manufacturing. Robotics and Computer Integrated Manufacturing, 23 (6). pp. 712-719. ISSN 0736-5845

Ion, W.J. and Conway, A. and Wodehouse, A.J. and Lynn, A. (2006) Computer support for distributed design teams. In: Proceedings of Knowledge and information management: the challenge of through life support, London, 26 September 2006. Institution of Mechanical Engineers.

Ijomah, Winifred L. and Childe, Stephen J. and Hammond, Geoffrey P. and McMahon, Christopher A. (2005) A robust description and tool for remanufacturing: a resource and energy recovery strategy. In: Fourth International symposium on environmentally concious design and inverse manufacturing. IEEE, pp. 472-479. ISBN 1-4244-0081-3

Inigo, A R and Chang, C C and Fann, W and White, J.D. and Huang, Y S and Jeng, U S and Sheu, H S and Peng, K.Y. and Chen, S A (2005) Enhanced hole mobility in poly(2-methoxy-5-(2 '-ethylhexoxy)-1,4-phenylenevinylene) by elimination of nanometer-sized domains (vol 17, pg 1835, 2005). Advanced Materials, 17 (17). p. 2147. ISSN 0935-9648

Ijomah, Winifred L. and Childe, Steve and McMahon, Chris (2004) Remanufacturing: a key strategy for sustainable development. In: Proceedings of the 3rd International Conference on Design and Manufacture for Sustainable Development. Cambridge University Press. ISBN 1-86058-470-5

Ion, W.J. and Stone, A. and Grierson, H. and Juster, N.P. and Wodehouse, A. (2004) A study of student learning in design projects. In: Conference Proceedings of IEPDE04, 2004-09-01.

Ion, W.J. and Wodehouse, A. and Juster, N.P. and Grierson, H. and Stone, A. (2004) Educating the global designer. In: Conference Proceedings of EASED 2004, 2004-01-01.

Ion, W.J. and Wodehouse, A. and Juster, N.P. and Grierson, H. and Stone, A. (2004) The impact of documentation and reflection on student learning in engineering design: a concept development project in the digital domain. In: Conference Proceedings of EASED 2004, 2004-01-01.

Inigo, A R and Tan, C H and Fann, W and Huang, Y S and Perng, G Y and Chen, S A (2001) Non-dispersive hole transport in a soluble poly(p-phenylene vinylene). Advanced Materials, 13 (7). 504–508. ISSN 0935-9648

J

Javadi, Yashar and MacLeod, Charles Norman and Pierce, Stephen and Gachagan, Anthony and Kerr, William and Ding, Jialuo and Williams, Stewart and Vasilev, Momchil and Su, Riliang and Mineo, Carmelo and Dziewierz, Jerzy (2018) Ultrasonic phased array inspection of wire plus arc additive manufacture ‎‎(WAAM) samples using conventional and total focusing method (TFM) ‎imaging approaches. In: 57th The British Institue of Non-destructive Testing Annual Conference, 2018-09-10 - 2018-09-12, East Midlands Conference Centre and Orchard Hotel.

Jónasdóttir, Hanna and Dhanani, Karishma and McRae, Kenneth and Mehnen, Jörn (2018) Upgrading legacy equipment to industry 4.0 through a cyber-physical interface. In: Advances in Production Management Systems 2018, 2018-08-26 - 2018-08-30, Seoul National University.

Josifovic, Aleksandar and Stickland, Matthew and Iannetti, Aldo and Corney, Jonathan (2017) Engineering procedure for positive displacement pump performance analysis based on 1D and 3D CFD commercial codes. In: Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASME, New York, NY. ISBN 9780791858110

Josifovic, Aleksandar and Corney, Jonathan (2017) Development of industrial process characterisation through data analysis. In: 2016 IEEE Symposium Series on Computational Intelligence, SSCI 2016. IEEE, Piscataway, N.J.. ISBN 978-1-5090-4241-8

Josifovic, Aleksandar and Roberts, Jennifer J. and Corney, Jonathan and Davies, Bruce and Shipton, Zoe K. (2016) Reducing the environmental impact of hydraulic fracturing through design optimisation of positive displacement pumps. Energy, 115 (1). pp. 1216-1233. ISSN 1873-6785

Jiang, Peiran and Wang, Liquan and Luo, Xichun (2015) Dynamic analysis of an under levelling-gripping system of an jacket platform under offshore environmental loads. In: 21st IEEE International Conference on Automation and Computing (ICAC 2015), 2015-09-11 - 2015-09-12, University of Strathclyde.

Josifovic, Aleksandar and Corney, Jonathan and Davies, Bruce (2015) Valve dynamics in multi-cylinder positive displacement pump model. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. Institute of Electrical and Electronics Engineers Inc., pp. 35-41. ISBN 9781467391078

Josifovic, Aleksandar and Corney, Jonathan and Davies, Bruce (2014) Modeling a variable speed drive for positive displacement pump. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. Institute of Electrical and Electronics Engineers Inc., pp. 1218-1223. ISBN 9781479957361

Jabbour, Charbel José Chiappetta and Jabbour, Ana Beatriz Lopes de Sousa and de Oliveira, Jorge Henrique Caldeira (2013) "Decifra-me ou te devoro" : uma análise das variáveis e fatores que influenciam o impacto da pesquisa científica desenvolvida na área de sustentabilidade no Brasil. Perspectivas em Ciência da Informação, 18 (2). pp. 79-90.

Jiang, H.M. and Kwong, C.K. and Ip, W.H. and Wong, T.C. (2012) Modeling customer satisfaction for new product development using a PSO-based ANFIS approach. Applied Soft Computing, 12 (2). pp. 726-734. ISSN 1568-4946

Jabbour, Ana Beatriz Lopes de Sousa and Jabbour, Charbel José Chiappetta (2012) Lançando luzes sobre a gestão de operações do setor eletroeletrônico brasileiro. Revista de Administração Pública, 46 (3). pp. 817-840. ISSN 1982-3134

Jabbour, Charbel José Chiappetta and Teixeira, Adriano Alves and Jabbour, Ana Beatriz Lopes de Sousa and Freitas, Wesley Ricardo de Souza (2012) "Verdes e competitivas?" a influência da gestão ambiental no desempenho operacional de empresas brasileiras. Ambiente e Sociedade, 15 (2). pp. 151-172. ISSN 1809-4422

Jabbour, Charbel José Chiappetta and de Souza Freitas, Wesley Ricardo and Teixeira, Adriano Alves and de Sousa Jabbour, Ana Beatriz Lopes (2012) Gestão de recursos humanos e desempenho operacional : evidências empíricas. Gestão & Produção, 19 (2). pp. 347-360.

Jagadeesan, A. P. and Lynn, A. and Wenzel, J. and Sherlock, A. and Regli, W. and Corney, J.R. and Yan, X.T. and Torres-Sanchez, C. (2009) Geometric reasoning via internet crowdsourcing. In: Proceedings of the 2009 ACM Symposium on Solid and Physical Modeling, San Francisco, California, USA. ACM, New York, USA, pp. 313-318. ISBN 9781605587110

Jabbour, Ana Beatriz L.S. and Jabbour, Charbel J.C. (2009) Are supplier selection criteria going green? Case studies of companies in Brazil. Industrial Management and Data Systems, 109 (4). pp. 477-495. ISSN 0263-5577

Jagadeesan, P. and Wenzel, J. and Corney, J.R. and Yan, X.T. and Sherlock, A. and Torres-Sanchez, C. and Regli, W. (2009) Validation of purdue engineering shape benchmark clusters by crowdsourcing. In: Proceedings of the International Conference on Product Lifecycle Management, 2009-07-06 - 2009-07-08.

Jagadeesan, P. and Wenzel, J. and Corney, J.R. and Yan, X.T. and Sherlock, A. and Regli, W. (2008) Geometric Reasoning With a Virtual Workforce (Crowdsourcing for CAD/CAM). In: VirMan 08 part of the 5th INTUITION International Conference: Virtual Reality in Industry and Society: From Research to Application,, 2008-10-06 - 2008-10-08.

Juster, N. and Greirson, H. and Nicol, D. and Ion, B. and Stone, A. and Wodehouse, A. (2004) Using digital libraries to enhance distributed design team performance. In: ASME 2004 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2004-09-01.

Juster, N.P. and Fitchie, M.R. and Taylor, S.J. and Dew, P. and Maxfield, J. (2001) Visualizing the impact of tolerances on cosmetic product quality. In: Design research: theories, methodologies, and product modelling : 21-23 August 2001, Scottish Exhibition and Conference Centre, Glasgow, UK. WDK publications, 1 . Professional Engineering, pp. 669-676. ISBN 1-86058-354-7

Juster, Neal P. and Maxfield, John and Dew, Peter M. (2001) Predicting product aesthetic quality using virtual environments. Journal of Computing and Information Science in Engineering, 1 (2). pp. 105-112. ISSN 1530-9827

K

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2019) Effect of edge conditions on the formability of commercially pure titanium sheet (Grade 2) at room temperature. In: The 14th World Conference on Titanium, 2019-06-10 - 2019-06-14.

Khan, Faisal and Mehnen, Jorn and Sreenuch, Tarapong and Alam, Syed and Townsend, Paul (2018) Swarm eye : a distributed autonomous surveillance system. International Journal of Advanced Computer Science and Applications, 9 (12). ISSN 2156-5570

Korznikova, Galia and Mironov, Sergey and Konkova, Tatyana and Aletdinov, Ainur and Zaripova, Rida and Myshlyaev, Michail and Lee Semiatin, Sheldon (2018) EBSD characterization of cryogenically rolled type 321 austenitic stainless steel. Metallurgical and Materials Transactions A, 49 (12). pp. 6325-6336. ISSN 1073-5623

Knowles, Alexander J and Reynolds, Lucy and Vorontsov, Vassili A and Dye, David (2018) A nickel based superalloy reinforced by both Ni_3Al and Ni_3V ordered-fcc precipitates. Scripta Materialia. ISSN 1359-6462 (In Press)

Konkova, Tatyana and Mironov, S. and Rahimi, Salah (2018) Evolution of microstructure and residual stresses in a CP-Ti bioimplant produced by incremental sheet forming. In: Ultrafine Grained and Nanostructured Materials. Bashkir State University, Ufa, Russian Federation, pp. 142-143. ISBN 978-5-7477-4721-0

Kum, Chun Wai and Sato, Takashi and Guo, Jiang and Liu, Kui and Butler, David (2018) A novel media properties-based material removal rate model for magnetic field-assisted finishing. International Journal of Mechanical Sciences, 141. pp. 189-197. ISSN 0020-7403

Konkova, T. and Rahimi, S. and Mironov, S. and Baker, T.N. (2018) Effect of strain level on the evolution of microstructure in a recently developed AD730 nickel based superalloy during hot forging. Materials Characterization, 139. pp. 437-445. ISSN 1044-5803

Korik, A. and Hay, L. and Choo, P. L. and Gilbert, S. J. and Grealy, M. and Duffy, A. and Coyle, D. (2018) Primitive shape imagery classification from electroencephalography. In: 7th International BCI Meeting, 2018-05-21 - 2018-05-25.

Konkova, T. and Mironov, S. and Rahimi, S. (2018) Characterisations of microstructure and residual stress in a customised cranial implant produced by Additive Manufacturing from commercially pure (CP) titanium. In: Manufactured using Advanced Powder Processes (MAPP), 2018-01-30 - 2018-01-31, University of Sheffield.

Khayatzadeh, S. and Thomas, M. J. and Millet, Y. and Rahimi, S. (2018) Characterisation and modelling of in-plane springback in a commercially pure titanium (CP-Ti). Journal of Materials Science. ISSN 0022-2461

Khayatzadeh, Saber and Flewitt, Peter E.J. and Smith, David and Tanner, David W.J. and Truman, C. E. (2017) Influence of thermal ageing on the creep behaviour of a P92 martensitic steel. Materials Science and Engineering: A, 708. pp. 544-555. ISSN 0921-5093

Krishnamurthy, B. and Bylya, O. and Davey, K. (2017) Physical modelling for metal forming processes. Procedia Engineering, 207. pp. 1075-1080. ISSN 1877-7058

Kuppusamy, N. and Whitfield, R. I. and Hird, A. and Brown, S. and McCubbin, C. and McCubbin, P. (2017) Using systems engineering to develop a novel manufacturing cost model. In: 15th International Conference on Manufacturing Research, 2017-09-05 - 2017-09-07, University of Greenwich.

Khayatzadeh, Saber and Moturu, Shanmukha Rao and Kelleher, Joe F. and Rahimi, Salah (2017) Development of process induced residual stress during flow forming of tubular 15-5 martensitic stainless steel. In: ASME Pressure Vessels & Piping Conference 2017, 2017-07-16 - 2017-07-20, Hilton Waikoloa Village.

Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2017) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: Strath Wide Researcher Conference 2017, 2017-05-30 - 2017-05-30, Strathclyde.

Khayatzadeh, Saber and Tanner, David W.J. and Truman, Christopher E. and Flewitt, Peter E.J. and Smith, David J. (2017) Creep deformation and stress relaxation of a martensitic P92 steel at 650 °C. Engineering Fracture Mechanics. pp. 1-15. ISSN 0013-7944

Krishnamurthy, Bhaskaran and Bylya, Olga and Muir, Lisa and Conway, Alastair and Blackwell, Paul (2017) On the specifics of modelling of rotary forging processes. Computer Methods in Materials Science, 17 (1). pp. 22-29. ISSN 1641-8581

Kakandar, Ebiakpo and Roy, Rajkumar and Mehnen, Jörn (2017) A simulation based approach to model design influence on the fatigue life of a vented brake disc. Procedia CIRP, 59. 41–46. ISSN 2212-8271

Kuzmann, E. and Da Silva, L. and Stichleutner, S. and El-Sharif, M. and Sziráki, L. and Chisholm, C. U. and Lak, B. and Klencsár, Z. (2016) Mössbauer and XRD study of Al-Sn linished steel bimetal alloy. Hyperfine Interactions, 237 (1). ISSN 0304-3843

Khayatzadeh, Saber and Rahimi, Salah and Blackwell, Paul (2016) Effect of plastic deformation on elastic and plastic recovery in CP-Titanium. Key Engineering Materials, 716. 891 - 896. ISSN 1013-9826

Konkova, T. and Valeev, I. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2016) Microstructure response of cryogenically-rolled Cu-30Zn brass to electric-current pulsing. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07.

Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2016) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07.

Korznikova, G. and Konkova, T. and Mironov, S. and Korznikov, A. and Myshlyaev, M.M. (2016) Эволюция микроструктуры в ходе криогенной прокатки латуни Л70. In: Ultrafine grained and nanocrystalline materials, 2016-10-03 - 2016-10-07, Russian Federation.

Kahani, Danial and Zante, Remi (2016) AFRC’s image processing platform : a high speed user-friendly architecture for real time object detection in forging processes. In: Advances in Manufacturing Technology XXX. Advances in Transdisciplinary Engineering . IOS Press, Amsterdam, pp. 205-210. ISBN 9781614996675 (In Press)

Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander and Korznikova, Galia and Myshlyaev, Mikhail M. and Semiatin, S. Lee (2016) Grain growth during annealing of cryogenically-rolled Cu-30Zn brass. Journal of Alloys and Compounds, 666. pp. 170-177. ISSN 0925-8388

Konkova, T. and Valeev, I. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2016) Microstructure response of cryogenically-rolled Cu-30Zn brass to electric-current pulsing. Journal of Alloys and Compounds, 659. pp. 184-192. ISSN 0925-8388

Kamarudin, Khairul Manami and Ridgway, Keith and Hassan, Mohd Roshdi (2016) Modelling constraints in the conceptual design process with TRIZ and F3. Procedia CIRP, 39. pp. 3-8. ISSN 2212-8271

Kamarudin, Khairul Manami and Ridgway, Keith and Ismail, Napsiah (2016) Abstraction and generalization in conceptual design process : involving safety principles in TRIZ-SDA environment. Procedia CIRP, 39. pp. 16-21. ISSN 2212-8271

Kamarudin, Khairul Manami and Ridgway, Keith and Hassan, Mohd Roshdi (2015) Modelling the conceptual design process with hybridization of TRIZ methodology and systematic design approach. Procedia Engineering, 131. pp. 1064-1072. ISSN 1877-7058

Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander and Korznikova, Galia and Myshlyaev, Mikhail and Semiatin, Lee (2015) A two-step approach for producing an ultrafine-grain structure in Cu-30Zn brass. Materials Letters, 161. pp. 1-4. ISSN 0167-577X

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2015) Effect of cryogenic temperature and change of strain path on grain refinement during rolling of Cu-30Zn brass. Materials and Design, 86. pp. 913-921. ISSN 0264-1275

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) Annealing behavior of cryogenically-rolled Cu-30Zn brass. Journal of Alloys and Compounds, 648. pp. 858-863. ISSN 0925-8388

Kreiling, Laura and Hird, Abigail (2015) Expert knowledge elicitation for the creation and validation of models in the absence of data. In: 27th European Conference on Operational Research (EURO XXVII), 2015-07-12 - 2015-07-15, University of Strathclyde.

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) Grain structure evolution during cryogenic rolling of alpha brass. Journal of Alloys and Compounds, 629. pp. 140-147. ISSN 0925-8388

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) An EBSD investigation of cryogenically-rolled Cu-30%Zn brass. Materials Characterization, 101. pp. 173-179. ISSN 1044-5803

Konkova, Tatyana and Valeev, Irshat and Mironov, Sergey and Korznikov, Alexander and Myshlyaev, Michail and Lee Semiatin, S. (2014) Effect of electric-current pulses on grain-structure evolution in cryogenically rolled copper. Journal of Materials Research, 29 (22). pp. 2727-2737. ISSN 0884-2914

Konkova, T.N. and Mironov, S. Yu and Ke, Y. and Ohnuki, J. (2014) Microstructural characteristics of electrodeposited damascene copper lines. Letters on Materials, 4 (2). pp. 104-107. ISSN 2410-3535

Kon'kova, Tatyana and Mironov, S. Yu and Korznikov, A. V. and Myshlyaev, M. M. (2014) Influence of low-temperature annealing on the microstructure of cryogenically deformed copper. Physics of the Solid State, 56 (2). pp. 235-241. ISSN 1090-6460

Konkova, T.H. and Mironov, S. and Ke, Yiqing and Onuki, J. (2013) Структура электроосажденных медных нанопроволок после отжига в широком диапазоне температур. In: V Russian conference of nanomaterials, 2013-09-23 - 2013-09-27.

Konkova, T. and Mironov, S. and Ke, Y. and Onuki, J. (2013) Annealing effect on the structure characteristics of nano-scale damascene copper lines. In: 2013 IEEE International Interconnect Technology Conference, IITC 2013. IEEE, Piscataway, N.J.. ISBN 9781479904389

Ke, Y. and Konkova, T. and Mironov, S. and Ohnuki, J. (2012) Effect of annealing temperature on structure of electrodeposited nano-scale copper wires. Letters on Materials, 2 (4). pp. 198-201. ISSN 2410-3535

Kazaras, Konstantinos and Kirytopoulos, Konstantinos and Rentizelas, Athanasios (2012) Introducing the STAMP method in road tunnel safety assessment. Safety Science, 50 (9). 1806–1817. ISSN 0925-7535

Kandemir, Destan and Acur, Nuran (2012) Examining proactive strategic decision-making flexibility in new product development. Journal of Product Innovation Management, 29 (4). pp. 608-622. ISSN 0737-6782

Konkova, Tatyana and Mironov, S. and Korznikov, A. and Myshlyaev, Michail (2012) Анализ спектра разориентировок на основе удельной поверхности границ. Deformation and Fracture of materials (6). pp. 41-46. ISSN 1814-4632

Konkova, Tatyana and Mironov, S. and Korznikov, A. and Myshlyaev, Michail (2012) Разделение механических двойников и двойников отжига посредством EBSD. Физическая мезомеханика, 15 (3). pp. 101-104. ISSN 1683-805X

Ke, Yiqing and Namekawa, T and Konkova, Tatyana and Onuki, J. (2012) The grain size distribution investigation of high purity plating Cu wire in depth direction. In: International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2012), 2012-10-08 - 2012-10-12.

Konkova, T. and Ke, Y. and Mironov, S. and Onuki, J. (2012) Structure evolution of electrodeposited nano-scale copper wires during annealing in wide temperature range. In: 2012 Autumn Meeting of the Japan Institute of Metals, 2012-09-17 - 2012-09-19.

Konkova, Tatyana and Ke, Yiqing and Mironov, S. and Onuki, J. (2012) Microstructure analysis of electrodeposited nanoscale copper wire by EBSD technique. In: International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2012), 2012-10-08 - 2012-10-12.

Konkova, Tatyana and Ke, Yiqing and Mironov, Sergey and Onuki, Jin (2012) Analysis of electrodeposited nano-scale copper wire microstructure by EBSD method. In: Advanced Metallization Conference 2012: 22nd Asian Session, 2012-10-22 - 2012-10-25, The University of Tokyo.

Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Оценка эффективности криогенной деформации для измельчения микроструктуры крупнозернистой меди. Deformation and Fracture of materials (10). pp. 6-16. ISSN 1814-4632

Konkova, T. and Mironov, S. and Korznikov, A. and Semiatin, S. L. (2011) On the room-temperature annealing of cryogenically rolled copper. Materials Science and Engineering: A, 528 (24). pp. 7432-7443. ISSN 0921-5093

Konkova, T.N. and Mironov, S.Y. and Korznikov, A.V. (2011) Кристаллографический анализ аномального роста зерен в криогенно-деформированной меди. Letters on Materials, 1 (3). pp. 162-166. ISSN 2410-3535

Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Аномальный рост зерен в криогенно-деформированной меди. Физическая мезомеханика, 14 (4). pp. 29-37. ISSN 1683-805X

Konkova, Tatyana (2011) Интенсивная пластическая деформация меди при криогенной температуре. In: Russian conference “Mavlutovskie chteniya”, 2011-03-21 - 2011-03-24.

Kumar, Jagadeesha and Attridge, Alex and Wood, Paul and Williams, Mark A (2011) Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, 22 (3). ISSN 0957-0233

Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Об эффективности криогенной деформации для измельчения микроструктуры меди. Физическая мезомеханика, 14 (1). pp. 83-92. ISSN 1683-805X

Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander (2011) Grain refinement in copper via cryogenic deformation. In: Congress on Nanotechnologies, The Third International Symposium on Bulk Nanostructured Materials: from fundamentals to innovations, BNM2011, 2011-08-23 - 2011-08-26.

Kumar, Maneesh and Antony, Jiju and Tiwari, M.K. (2011) Six Sigma implementation Framework for SMEs : a roadmap to manage and sustain the change. International Journal of Production Research, 49 (18). pp. 5449-5467. ISSN 0020-7543

Kirytopoulos, K. and Rentizelas, A. and Tatsiopoulos, I. and Kazaras, K. (2010) Improving safety in Greek road tunnels. In: The Sustainable World. WIT Transactions on Ecology and the Environment . Wit Pr/Computational Mechanics, pp. 557-566. ISBN 9781845645045

Konkova, T.H. (2010) Интенсивная пластическая деформация при температуре жидкого азота. In: VII Russian conference of young research assistants and post-graduate students, 2010-11-08 - 2010-11-11.

Konkova, T. and Mironov, S. and Korznikov, A. and Semiatin, S. L. (2010) Microstructural response of pure copper to cryogenic rolling. Acta Materialia, 58 (16). pp. 5262-5273. ISSN 1359-6454

Konkova, Tatyana and Mironov, Sergey and Danilenko, Valery and Korznikov, A. (2010) Двустадийная криогенная деформация меди. Deformation and Fracture of materials, 6. pp. 13-20. ISSN 1814-4632

Konkova, T.H. and Mironov, S. and Korznikov, A. (2010) Низкотемпературная деформация меди. In: X Peterburgskie chteniya, 2010-04-13 - 2010-04-15.

Konkova, Tatyana and Mironov, S. and Korznikov, A. (2010) Криогенная деформация меди. Упрочняющие технологии и покрытия, 1. pp. 33-39. ISSN 1813-1336

Kirytopoulos, K. and Rentizelas, A. and Kazaras, K. and Tatsiopoulos, I. (2010) Quantitative operational risk analysis for dangerous goods transportation through cut and cover road tunnels. In: Reliability, Risk and Safety. CRC Press, Boca Raton, pp. 167-172. ISBN 9780415604277

Kennedy, B. and DeVor, R. and Rosochowski, A. (2010) First-place finish : imparting fine surface finishes when micromilling. Micromanufacturing, 3 (1). pp. 29-32.

Kirytopoulos, Konstantinos A. and Rentizelas, Athanasios A. and Tatsiopoulos, Ilias P. and Papadopoulos, George (2010) Quantitative risk analysis for road tunnels complying with EU regulations. Journal of Risk Research, 13 (8). pp. 1027-1041. ISSN 1366-9877

Konkova, Tatyana and Mironov, Sergey and Korznikov, A. (2009) Формирование микроструктуры в ходе криогенной прокатки меди. Rolling (12). pp. 2-8.

Konkova, T.H. and Mironov, S. and Korznikov, A. (2009) Деформация меди в криогенных условиях. In: X International Conference "Ural Seminar of Young Material Scientists", 2009-12-07 - 2009-12-11.

Kwong, C.K. and Wong, T.C. and Chan, K.Y. (2009) A methodology of generating customer satisfaction models for new product development using a neuro-fuzzy approach. Expert Systems with Applications, 36 (8). pp. 11262-11270. ISSN 0957-4174

Konkova, Tatyana and Mironov, S. and Korznikov, A. (2009) Влияние криогенной прокатки на микроструктуру и механические свойства меди. Упрочняющие технологии и покрытия (9). pp. 40-47. ISSN 1813-1336

Konkova, Tatyana and Mironov, Sergey and Korznikov, A. (2009) Влияние криогенной осадки на микроструктуру катаной мелкозернистой меди. Rolling (9). pp. 6-12.

Kokkonen, J. and Kuokkala, V-T and Seidt, J.D. and Walker, A. and Gilat, A. and Olejnik, L. and Rosochowski, A. (2009) High strain rate deformation analysis of UFG aluminum sheet samples. In: 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2009-06-01 - 2009-06-04.

Konkova, T.N. and Mironov, S.Yu. and Korznikov, A.V. (2009) Severe cryogenic plastic deformation of copper. In: RusNanoTech 2009, 2009-10-06 - 2009-10-08.

Kovach, Jami and Cho, Byung Rae and Antony, Jiju (2009) Development of a variance prioritized multiresponse robust design framework for quality improvement. International Journal of Quality and Reliability Management, 26 (4). pp. 380-396. ISSN 0265-671X

Kumar, Maneesh and Antony, J. (2009) Multiple case-study analysis of quality management practices within UK Six Sigma and non-Six Sigma manufacturing small- and medium-sized enterprises. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233. pp. 925-934. ISSN 2041-2975

Kumar, Maneesh and Antony, J. and Cho, B. R. (2009) Project selection and its impact on the successful deployment of Six Sigma. Business Process Management Journal, 15 (5). pp. 669-686. ISSN 1463-7154

Kumar, Maneesh and Antony, J. and Douglas, A. (2009) Does size matter for Six Sigma implementation? Findings from the survey in UK SMEs. TQM Journal, 21 (6). pp. 623-635. ISSN 1754-2731

Kwong, C. K. and Wong, T. C. (2008) A Neuro-Fuzzy approach to generating customer satisfaction model for new product development. In: 2008 IEEE International Conference on Industrial Engineering and Engineering Management. IEEM 2008. IEEE, pp. 1804-1808. ISBN 9781424426294

Konkova, T.H. and Salischev, G. (2008) Механическое поведение меди, подвергнутой ударно-волновому нагружению. In: XIX Ural School of material scientists, 2008-02-04 - 2008-02-08.

Kokkonen, J. and Kuokkala, V-T and Olejnik, L. and Rosochowski, A. (2008) Dynamic behaviour of ECAP-processed aluminium at room and sub-zero temperature. In: Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics. Society for Experimental Mechanics. ISBN 0-912053-99-2

Konkova, Tatyana (2008) Cryogenic severe deformation influence on the structure of copper. In: International Workshop on the Plasticity of Nanocrystalline Metals, 2008-09-28 - 2008-10-01, Lake Bostal.

Kumar, Maneesh and Antony, Jiju and Madu, Christian N. and Montgomery, Douglas C. and Park, Sung H. (2008) Common myths of six sigma demystified. International Journal of Quality and Reliability Management, 25 (8). pp. 878-895. ISSN 0265-671X

Kuokkala, V.T and Kokkonen, J. and Song, B. and Chen, W. and Olejnik, L. and Rosochowski, A. (2008) Dynamic response of severe plastic deformation processed 1070 aluminum at various temperatures. In: Proceedings of the 18th DYMAT Technical Meeting, The Behaviour of Bulk Nanomaterials and Metallic Glasses under Dynamic Loading. Nexter Munitions, La Chapelle, France. ISBN 2-9517947-3-8

King, Andrew M. and Burgess, Stuart C. and Ijomah, Winnie and McMahon, Chris A. (2006) Reducing waste : repair, recondition, remanufacture or recycle? Sustainable Development, 14 (4). pp. 257-267. ISSN 0968-0802

Kirytopoulos, Konstantinos and Rentizelas, Athanasios and Tziralis, Georgios (2006) On quantifying uncertainty for project selection : the case of a renewable energy sources investment. In: World Renewable Energy & Environment Conference (WREEC) 2006, 2006-01-01, Tripoli.

King, A. and Ijomah, W.L. and McMahon, C.A. (2004) Reducing end-of-life waste: repair, recondition, remanufacture or recycle? In: Proceedings of the ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 28-October 2, 2004, Salt Lake City, Utah [CD-ROM]. American Society of Mechanical Engineers. ISBN 0791837424

Kehoe, D.F. and Burns, N.D. and Bititci, Umit (1999) A composite approach to performance measurement system auditing. International Journal of Business Performance Management, 1 (3). 279 - 298.

Kok Sim, Siang and Duffy, Alex H. B. (1998) A formalism for coupled design learning activities. In: Workshop on Machine Learning in Design 5th International Conference on Artificial Intelligence in Design (AID '98), 1998-07-19.

L

Luo, Cai and Wang, Ke and Li, Guangyuan and Yin, Suchong and Yu, Leijian and Yang, Erfu (2019) Development of active soft robotic manipulators for stable grasping under slippery conditions. IEEE Access. pp. 1-9. ISSN 2169-3536

Luo, Cai and Yu, Leijian and Yang, Erfu and Zhou, Huiyu and Ren, Peng (2019) A benchmark image dataset for industrial tools. Pattern Recognition Letters, 125. pp. 341-348. ISSN 0167-8655

Li, Zhipeng and Zhang, Feihu and Luo, Xichun and Chang, Wenlong and Cai, Yukui and Zhong, Wenbin and Ding, Fei (2019) Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization. Journal of the European Ceramic Society, 39 (4). pp. 705-717. ISSN 0955-2219

Liu, Lei and Xu, Zongwei and Hartmaier, Alexander and Luo, Xichun and Zhang, Junjie and Nordlund, Kai and Rommel, Mathias (2019) MD simulation of stress-assisted nanometric cutting mechanism of 3C silicon carbide. Industrial Lubrication and Tribology. ISSN 0036-8792 (In Press)

Li, Junling and Wang, Baoyu and Huang, He and Fang, Shuang and Chen, Ping and Zhao, Jie and Qin, Yi (2019) Behaviour and constitutive modelling of ductile damage of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si alloy under hot tensile deformation. Journal of Alloys and Compounds, 780. pp. 284-292. ISSN 0925-8388

Li, Zhipeng and Zhang, Feihu and Luo, Xichun and Cai, Yukui (2018) Fundamental understanding of the deformation mechanism and corresponding behavior of RB-SiC ceramics subjected to nano-scratch in ambient temperature. Applied Surface Science. ISSN 0169-4332

Li, Zhipeng and Zhang, Feihu and Luo, Xichun (2018) Subsurface damages beneath fracture pits of reaction-bonded silicon carbide after ultra-precision grinding. Applied Surface Science, 448. pp. 341-350. ISSN 0169-4332

Li, Zhipeng and Zhang, Feihu and Luo, Xichun and Guo, XiaoGuang and Cai, Yukui and Chang, Wenlong and Sun, Jining (2018) A new grinding force model for micro grinding RB-SiC ceramics with grinding wheel topography as an input. Micromachines, 9 (8). ISSN 2072-666X

Luo, Xichun and Qin, Yi (2018) Hybrid Machining : Theory, Methods, and Case Studies. Academic Press, London. ISBN 9780128130599

Luo, Xichun and Zhong, Wenbin and Chang, Wenlong (2018) A generic control architecture for hybrid micro-machines. Micromachines, 9 (6). ISSN 2072-666X

Lu, Diqun and Wang, Lu and Yang, Erfu and Wang, Gang (2017) Design of high-isolation wideband dual-polarized compact MIMO antennas with multi-objective optimization. IEEE Transactions on Antennas and Propagation. pp. 1-6. ISSN 0018-926X

Lipinska, Marta and Chrominski, Witold and Olejnik, Lech and Golinski, Jacek and Rosochowski, Andrzej and Lewandowska, Malgorzata (2017) Ultrafine grained plates of Al-Mg-Si alloy obtained by Incremental Equal Channel Angular Pressing : microstructure and mechanical properties. Metallurgical and Materials Transactions A, 48 (10). 4871–4882. ISSN 1073-5623

Latan, Hengky and Chiappetta Jabbour, Charbel Jose and Lopes de Sousa Jabbour, Ana Beatriz (2017) Ethical awareness, ethical judgment and whistleblowing : a moderated mediation analysis. Journal of Business Ethics. pp. 1-41. ISSN 0167-4544

Lipińska, Marta and Ura-Bińczyk, Ewa and Olejnik, Lech and Rosochowski, Andrzej and Lewandowska, Malgorzata (2017) Microstructure and corrosion behavior of the friction stir welded joints made from ultrafine grained aluminum. Advanced Engineering Materials. ISSN 1527-2648

Li, Zhipeng and Zhang, Feihu and Zhang, Yong and Luo, Xichun (2017) Experimental investigation on the surface and subsurface damages characteristics and formation mechanisms in ultra-precision grinding of SiC. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Liu, Xiaoyu and Zhao, Shiping and Qin, Yi and Zhao, Jie and Wan Nawang, Wan Adlan (2017) A parametric study on the accuracy of bending in micro W-bending using Taguchi method. Measurement: Journal of the International Measurement Confederation, 100. pp. 233-242.

Laureani, Alessandro and Antony, Jiju (2017) Leadership and Lean Six Sigma : a systematic literature review. Total Quality Management and Business Excellence. pp. 1-29. ISSN 1478-3363

Liu, Xiaoyu and Zhao, Shiping and Qin, Yi and Wang, Chunju and Wan Nawang, Wan Adlan (2017) Size effect on the springback of CuZn37 brass foils in tension and micro W-bending. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Liboni Amui, Lara Bartocci and Chiappetta Jabbour, Charbel José and Jabbour, Ana Beatriz Lopes de Sousa and Devika, K. (2017) Sustainability as a dynamic organizational capability : a systematic review and a future agenda toward a sustainable transition. Journal of Cleaner Production, 142 (Part 1). pp. 308-322. ISSN 0959-6526

Long, Euan and Kokke, Saskia and Lundie, Donald and Shaw, Nicola and Ijomah, Winifred and Kao, Chih-chuan (2016) Technical solutions to improve global sustainable management of waste electrical and electronic equipment (WEEE) in the EU and China. Journal of Remanufacturing, 6 (1). ISSN 2210-4690

Lewandowska, Malgorzata and Chrominski, Witold and Lipinska, Marta and Olejnik, Lech and Rosochowski, Andrzej (2016) Incremental ECAP as a method to produce ultrafine grained aluminium plates. Key Engineering Materials, 710. pp. 59-64. ISSN 1013-9826

Lopes de Sousa Jabbour, Ana Beatriz and Verdério Júnior, Silvio Aparecido and Chiappetta Jabbour, Charbel José and Leal, Walter and Souza Campos, Lucila and de Castro, Rosani (2016) Toward greener supply chains : is there a role for the new ISO 50001 approach to energy and carbon management? Energy Efficiency. ISSN 1570-6478 (In Press)

Ledwoch, Anna and Brintrup, Alexandra and Mehnen, Jörn and Tiwari, Ashutosh (2016) Systemic risk assessment in complex supply networks. IEEE Systems Journal. pp. 1-12. ISSN 1932-8184

Lalvani, H. M. and Brooks, J. W. (2016) Hot forging of IN718 with solution-treated and delta-containing initial microstructures. Metallography, Microstructure, and Analysis. pp. 1-10. ISSN 2192-9270

Laureani, Alessandro and Antony, Jiju (2016) Leadership – a critical success factor for the effective implementation of Lean Six Sigma. Total Quality Management and Business Excellence. pp. 1-22. ISSN 1478-3363

Lacka, Ewelina and Wong, T. C. and He, Hongwei (2016) Balancing service productivity by the means of digital technologies. In: 23rd EurOMA, 2016-06-17 - 2016-06-22, Norway.

Lin, M.Y. and Chin, K.S. and Tsui, K.L. and Wong, T.C. (2016) Genetic based discrete particle swarm optimization for elderly day care center timetabling. Computers & Operations Research, 65. pp. 125-138. ISSN 0305-0548

Lipińska, Marta and Olejnik, Lech and Pietras, Adam and Rosochowski, Andrzej and Bazarnik, Piotr and Goliński, Jacek and Brynk, Tomasz and Lewandowska, Małgorzata (2015) Microstructure and mechanical properties of friction stir welded joints made from ultrafine grained aluminium 1050. Materials and Design, 88. pp. 22-31. ISSN 0264-1275

Laureani, Alessandro and Antony, Jiju (2015) Leadership characteristics for Lean Six Sigma. Total Quality Management and Business Excellence. ISSN 1478-3363

Lipińska, M. and Olejnik, L. and Chromiński1, W. and Rosochowski, A. and Goliński, J. and Lewandowska, M. (2015) Microstructure evolution in aluminium 6060 during incremental ECAP. In: Euromat 2015, 2015-09-20 - 2015-09-24, Warsaw University of Technology.

Liu, Xiaoyu and Zhao, Shiping and Qin, Yi and Nawang, Wan Adian Wan (2015) Influence of size effects on material properties and springback behavior of metal foils in micro bending : a review. MATEC Web of Conferences, 21. ISSN 2261-236X

Li, Junquan and Post, Mark and Vukovich, George (2015) Orbit and attitude stability criteria of solar sail on the displaced orbit. In: Astrodynamics 2015. Advances in the Astronautical Sciences . Univelt Inc, San Diego, California, pp. 761-784. ISBN 9780877036296

Li, Junquan and Greenland, Steve and Clark, Craig and Post, Mark A. (2015) Microsatellite formation flying using pulsed plasma thruster and solar sailing at Earth Moon L4. In: 8th International Workshop on Satellite Constellations and Formation Flying, 2015-06-08 - 2015-06-10. (Unpublished)

Li, Junquan and Post, Mark and Lee, Regina (2015) FPGA hardware nonlinear control design for modular CubeSat attitude control system. In: 2015 IEEE Aerospace Conference. IEEE, 978-1-4799-5379-0, pp. 1-15.

Luo, Xichun and Tong, Zhen and Liang, Yingchun (2014) Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures. Applied Surface Science, 321. pp. 495-502. ISSN 0169-4332

Li, Yutong and Wang, Yuxin and Duffy, Alex H B (2014) Computer-based creativity enhanced conceptual design model for non-routine design of mechanical systems. Chinese Journal of Mechanical Engineering, 27 (6). pp. 1083-1098. ISSN 1000-9345

Li, Junquan and Greenland, Steve and Post, Mark and Coletti, Michele (2014) A highly miniaturized uPPT thruster for attitude-orbit control. In: 6th European CubeSat Symposium, 2014-10-14 - 2014-10-16.

Lipinska, Marta and Olejnik, Lech and Pietras, Adam and Brynk, Tomasz and Rosochowski, Andrzej and Lewandowska, Malgorzata and Golinski, Jacek (2014) Joining ultrafine grained aluminium by friction stir welding – processing, microstructure and mechanical properties. In: Nanotechnology and Advanced Materials for Innovative Industry, Nano PL 2014, 2014-10-15 - 2014-10-17.

Li, Junquan and Greenland, Steve and Clark, Craig and Post, Mark and Vick, Andy and Pearson, David and Lee, David and MacLeod, Donald (2014) Practical strategies to stabilize a nanosatellite platform with a space camera and integrated mechanical parts. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Liu, Xiaoyu and Wang, Lizhen and Ji, Jing and Yao, Wei and Wei, Wei and Fan, Jie and Joshi, Shailesh and Li, Deyu and Fan, Yubo (2014) A mechanical model of the cornea considering the crimping morphology of collagen fibrils. Investigative Ophthalmology and Visual Science, 55 (4). pp. 2739-2746. ISSN 0146-0404

Liang, Yingchun and Chen, Wanqun and Sun, Yazhou and Luo, Xichun and Lu, Lihua and Liu, Haitao (2014) A mechanical structure-based design method and its implementation on a fly-cutting machine tool design. International Journal of Advanced Manufacturing Technology, 70 (9-12). pp. 1915-1921. ISSN 0268-3768

Liang, Yingchun and Chen, Wanqun and An, Chenhui and Luo, Xichun and Chen, Guoda and Zhang, Qiang (2014) Investigation of the tool-tip vibration and its influence upon surface generation in flycutting. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (12). pp. 2162-2167.

Li, Junquan and Post, Mark and Lee, Regina (2013) Real-time nonlinear attitude control system for nanosatellite applications. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1661-1671. ISSN 1533-3884

Lu, Dong and Yang, Yi and Qin, Yi (2013) Forming microgears by Micro-FAST technology. Journal of Microelectromechanical Systems, 22 (3). pp. 708-715. ISSN 1057-7157

Laureani, Alessandro and Brady, Malcolm and Antony, Jiju (2013) Applications of Lean Six Sigma in an Irish hospital. Leadership in Health Services, 26 (4). pp. 322-337. ISSN 1751-1879

Lin, Xiaoxia and Wang, Wenguang and Yang, Erfu (2013) Urban construction area extraction using circular polarimetric correlation coefficient. In: 2013 IEEE International Conference on Imaging Systems and Techniques (IST). IEEE, Piscataway, NJ., pp. 359-362. ISBN 9781467357906

Lopes de Sousa Jabbour, Ana Beatriz and Jabbour, Charbel José Chiappetta and de Souza Freitas, Wesley Ricardo and Teixeira, Adriano Alves (2013) Lean and green? Evidências empíricas do setor automotivo brasileiro. Gestão & Produção, 20 (3). pp. 653-665.

Luo, Xichun and Goel, Saurav and Reuben, Robert L (2012) A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide. Journal of the European Ceramic Society, 32 (12). pp. 3423-3434. ISSN 0955-2219

Li, Junquan and Post, Mark and Lee, Regina (2012) Real time fault tolerant nonlinear attitude control system for nanosatellite applications. In: Infotech@Aerospace 2012, 2012-06-19 - 2012-06-21, Hyatt Regency Orange County.

Luo, X. and Sun, J. and Chang, W. and Ritchie, J.M. (2012) Single point diamond turning of calcium fluoride optics. In: Key Engineering Materials. UNSPECIFIED, pp. 408-413. ISBN 9783037854280

Lee, Regina and Chesser, Hugh and Post, Mark and Cannata, Matthew and Kumar, Krishna Dev (2012) Modular attitude control system design for cubesat application. In: CASI ASTRO 2012, 2012-04-24 - 2012-06-24, Fairmont Château Frontenac Hotel.

Li, Junquan and Post, Mark and Kumar, Krishna Dev (2012) Nanosatellite nonlinear attitude control testing on an air bearing system. In: CASI ASTRO 2012, 2012-04-24 - 2012-06-24, Fairmont Château Frontenac Hotel.

Laureani, Alessandro (2012) Lean six sigma in the service industry. In: Advanced Topics in Applied Operations Management. InTech, Rijeka. ISBN 9789535103455

Laureani, Alessandro and Antony, Jiju (2012) Critical success factors for the effective implementation of Lean Sigma. International Journal of Lean Six Sigma, 3 (4). pp. 274-283. ISSN 2040-4166

Laureani, Alessandro and Antony, Jiju (2012) Standards for Lean Six Sigma certification. International Journal of Productivity and Performance Management, 61 (1). pp. 110-120. ISSN 1741-0401

Lu, Dong and Yang, Yi and Qin, Yi and Yang, Gang (2012) Effect of particle size and sintering temperature on densification during coupled multifield-activated microforming. Journal of Materials Research, 27 (20).

Luo, X. and Sun, J. and Ritchie, J.M. and Chang, W. and Wang, W. (2011) Deterministic fabrication of nanostructures for plasmonic lens by focused ion beam. International Journal of Advanced Manufacturing Technology, 57 (9-12). pp. 1003-1009. ISSN 0268-3768

Luo, Xichun (2011) High precision surfaces generation : modelling, simulation and machining verification. LAMBERT Academic Publishing. ISBN 9783846511749

Leopold, J and Wohlgemuth, R and Shan, D.B. and Lin, J.G. and Qin, Yi (2011) Modelling and simulation of coating-substrate-systems - state-of-the-art and future trends. In: 9th The "A" Coatings International Conference, 2011-10-03 - 2011-10-05.

Liu, S. and Duffy, A.H.B. and Whitfield, R.I. and Boyle, I.M. (2010) Integration of decision support systems to improve decision support performance. Knowledge Information Systems, 22 (3). pp. 261-286. ISSN 0219-1377

Lucas, Raymond and Mair, G.M. and Romice, Ombretta (2010) Making sense of the city : representing the multi-modality of urban space. In: Designing for the 21st Century. Gower, Surrey, pp. 190-208. ISBN 978-1-4094-0240-4

Lalvani, Himanshu M. and Rist, Martin A. and Brooks, Jeffery W. (2010) Effect of delta phase on the hot deformation behaviour and microstructural evolution of inconel 718. Advanced Materials Research, 89-91 (THERME). pp. 89-91. ISSN 1022-6680

Li, M. and Wang, B. and Lu, Y. and Zhou, M. and Chen, I. (2010) Smart antenna in intelligent transportation systems. In: Wireless technologies for intelligent transportation systems. Transportation Issues, Policies and R&D . Nova Science Publishers, Inc., Hauppauge, pp. 51-84. ISBN 9781607415886

Laureani, Alessandro and Antony, Jiju and Douglas, Alex (2010) Lean six sigma in a call centre : a case study. International Journal of Productivity and Performance Management, 59 (8). pp. 757-768. ISSN 1741-0401

Luo, Xichun (2010) Fabrication of micro fluidic mould by micromilling and laser deburring. In: 10th euspen International Conference, 2010-05-31 - 2010-06-04.

Liu, S. and Duffy, A.H.B. and Whitfield, R.I. and Boyle, I.M. and McKenna, I. (2009) Towards the realisation of an integratated decision support environment for organisational decision making. International Journal of the Decision Support System Technology, 1 (4). pp. 38-58. ISSN 1941-6296

Liu, Shaofeng and Duffy, Alex and Whitfield, Robert Ian and Boyle, Iain and Wang, Wenjuan and Mohamed, Khaled (2009) Decision-focussed resource modelling for design decision support. In: 17th International Conference on Engineering Design (ICED `09), 2009-08-24 - 2009-08-27.

Lim, Sungwoo and Prats, Miquel and Jowers, Iestyn and Chase, Scott and Garner, Steve and McKay, Alison, AHRC (Funder), EPSRC (Funder) (2009) Shape exploration in design : formalising and supporting a transformational process. International Journal of Architectural Computing, 6 (4). pp. 415-433. ISSN 1478-0771

Li, Wei and Arslan, Tughrul and Han, Jiuqiang and Erdogan, Ahmet T. and El-Rayis, Ahmed O. and Haridas, Nakul and Yang, Erfu (2009) Energy efficiency enhancement in satellite based WSN through collaboration and self-organized mobility. In: 2009 IEEE Aerospace Conference. IEEE, Piscataway, NJ., pp. 1-8. ISBN 9781424426218

Liu, S. and Boyle, I.M. (2009) Engineering design: perspectives, challenges, and recent advances. Journal of Engineering Design, 20 (1). pp. 7-19. ISSN 0954-4828

Lim, Theodore and Medellin, Hugo and Sung, Raymond and Ritchie, James and Corney, Jonathan (2009) Virtual assembly rapid prototyping of near net shapes. Ingeniería Mecánica. Tecnología y Desarrollo, 3 (2).

Lim, Theodore and Medellin, Hugo and Sung, Raymond and Ritchie, James and Corney, Jonathan (2009) Virtual bloXing - assembly rapid prototyping for near net shapes. In: World Conference on Innovative VR, 2009-02-25 - 2009-02-26.

Liu, Shaofeng and Duffy, Alex H.B. and Boyle, Iain M. and Whitfield, Robert Ian (2008) Knowledge re-use for decision support. In: Realising Network Enabled Capability 2008, 2008-10-13 - 2008-10-14, Oulton Hall Hotel, Leeds.

Lucas, Raymond and Mair, Gordon and Romice, Ombretta (2008) The scale of sense : spatial extent and multimodal urban design. In: Urban Diversities, Biosphere and Well-being. IAPS.

Liu, Shaofeng and Duffy, Alex H.B. and Whitfield, Robert Ian and Boyle, Iain M. (2008) An integrated decision support environment for organisational decision making. In: Proceedings of the 2008 conference on Collaborative Decision Making. IOS Press, pp. 392-403. ISBN 9781586038816

Luo, Xichun and Sun, J. (2008) A simulation study on tool wear in ultra precision diamond turning silicon. In: 8th euspen International Conference, 2008-05-18 - 2008-05-22.

Liu, S. and McMahon, C.A. and Culley, S.J. (2008) A review of structured document retrieval (sdr) technology to improve information access performance in engineering document management. Computers in Industry, 59 (1). pp. 3-16.

Lim, T.C. and Ritchie, J.M. and Dewar, R. and Corney, J.R. and Wilkinson, P. and Callis, M. and Desmulliez, M. and Fang, J.J. (2007) Factors affecting user performance in haptic assembly. Virtual Reality, 11 (4). pp. 241-252. ISSN 1359-4338

Lim, Thong Leng and Chang, C. W. and Inigo, Jesuraj and Huang, Y. F. and White, Jonathon David and Fann, Wunshain (2006) Comment on 'Enhancement of carrier mobility in MEH-PPV film prepared under presence of electric field' by Quanmin Shi [Chem. Phys. Lett. 425 (2006) 353]. Chemical Physics Letters, 432 (4-6). pp. 564-565. ISSN 0009-2614

Lim, T.C. and Medellin, H. and Torres-Sanchez, C. and Corney, J.R. and Ritchie, J.M. and Davies, J.B.C. (2005) Edge-based identification of DP-features on freeform solids. IEEE Transactions on Pattern Analysis and Machine Intelligence, 27 (6). pp. 851-860. ISSN 0162-8828

Liu, Y. and Peng, X. and Qin, Y. (2004) FE simulation for concurrent design and manufacture of automotive sheet-metal parts. Journal of Materials Processing Technology, 150 (1-2). pp. 145-150. ISSN 0924-0136

Lopez, U and Bititci, Umit and Errasti, A (2004) Business processes : the critical link in collaborative enterprises. In: International Conference of European Operations Management, 2004-06-01.

Langford, David and Martinez, Veronica and Bititci, Umit (2003) Best value in construction: towards an interpretation of value from client and constructors perspectives. Journal of Construction Procurement, 9 (1). pp. 56-67. ISSN 1358-9180

Lim, S.W. and Duffy, A.H.B. and Lee, B.S. (2003) Active pendulation controlled davits. In: UNSPECIFIED. (Unpublished)

Lu, D. and Antony, J. (2002) Optimisation of multiple responses using a fuzzy rule-based inference system. International Journal of Production Research, 40 (7). pp. 1613-1625. ISSN 0020-7543

Lim, T.C. and Corney, J.R. and Clark, D. (2001) Laminae-based feature recognition. IEEE Transactions on Pattern Analysis and Machine Intelligence, 23 (9). pp. 1043-1048. ISSN 0162-8828

Lim, S.W. and Lee, B.S. and Duffy, A.H.B. (2001) Incremental modelling of ambiguous geometric ideas (I-MAGI): represenation and maintenance of vague geometry. Artificial Intelligence in Engineering, 15 (2). pp. 93-108. ISSN 0954-1810

Lim, Sungwoo and Duffy, Alex H.B. and Lee, Byungsuk (2001) Intelligent computational sketching support for conceptual design. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

Lim, Sungwoo and Duffy, Alex H.B. and Lee, Byungsuk (2001) Shape matching and clustering. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

Lim, T.C. and Corney, J.R. and Ritchie, J.M. and Clark, D. (2001) Optimizing tool selection. International Journal of Production Research, 39 (6). pp. 1239-1256. ISSN 0020-7543

Lutz, S and Bititci, Umit and Carrie, A.S. and Turner, T. (1998) Integrated performance measurement - a reference model and an audit method. In: Advances in manufacturing technology XII. Professional Engineering Publishing Ltd., UK, pp. 391-396. ISBN 1860581722

Little, C. and Gettinby, G. and Irvine, D. and Eckersall, P.D. and Murray, M. (1994) Use of a hospital database for the evaluation of clinical biochemistry results. Journal of Small Animal Practice, 35 (4). pp. 205-210. ISSN 0022-4510

Lunde, J and Bititci, Umit (1990) An expert system for selecting and configuring programmable logic controllers. Engineering Applications of Artificial Intelligence, 2 (2). pp. 154-161.

M

Mandal, Paranjayee and Gomez-Gallegos, Ares and Gonzalez, Diego and ElRakayby, Hosam and Blackwell, Paul (2019) Superplastic behaviour of Ti54M and Ti64. In: The 14th World Conference on Titanium, 2019-06-10 - 2019-06-14.

Mosleh, Ahmed O. and Mikhaylovskaya, Anastasia V. and Kotov, Anton D. and Kwame, James S. and Aksenov, Sergey A. (2019) Superplasticity of Ti-6Al-4V titanium alloy : microstructure evolution and constitutive modelling. Materials, 12 (11). ISSN 1996-1944

Morar, Nicolau Iralal and Roy, Rajkumar and Gray, Simon and Nicholls, John and Mehnen, Jörn (2018) Modelling the influence of laser drilled recast layer thickness on the fatigue performance of CMSX-4. Procedia Manufacturing, 16. pp. 67-74. ISSN 2351-9789

McMaster, Thomas A and Yan, Xiu T (2018) Development of a heat flow code to simulate production of a functionally graded material robotic gripper using the additive manufacture process. In: Mechatronics 2018 : Reinventing Mechatronics, 2018-09-19 - 2018-09-21, Technology & Innovation Centre, University of Strathclyde.

Maclachlan, Ross and Wodehouse, Andrew and Vasantha, Gokula (2018) A new approach for patent use in student design engineering projects. In: Proceedings of the 20th International Conference on Engineering and Product Design Education, E&PDE 2018. Design Society, Glasgow, pp. 288-293. ISBN 9781912254026

Miscandlon, Jill and Tuffs, Martin and Halliday, Steven T. and Conway, Alastair (2018) Effects of flow forming parameters on dimensional accuracy in Cr-Mo-V steel tubes. Procedia Manufacturing, 15. pp. 1215-1223. ISSN 2351-9789

McTeague, Chris and Duffy, Alex and Hay, Laura and Vuletic, Tijana and Campbell, Gerard and Choo, Pei Ling and Grealy, Madeleine (2018) Extending the structural alignment model to similarity judgements of design concepts. In: Design Computing Cognition DCC18, 2018-07-02 - 2018-07-04, Politecnico di Milano, Lecco Campus.

McTeague, C. P. and Duffy, A. and Hay, L. and Vuletic, T. and Campbell, G. and Choo, P. L. and Grealy, M. (2018) Insights into design concept similarity judgements. In: 15th International Design Conference, 2018-05-21 - 2018-05-24.

Mauro, Caterina and Rentizelas, Athanasios A. and Chinese, Damiana (2018) International vs. domestic bioenergy supply chains for co-firing plants : the role of pre-treatment technologies. Renewable Energy, 119. pp. 712-730. ISSN 0960-1481

Morar, Nicolau Iralal and Roy, Rajkumar and Mehnen, Jörn and Marithumu, Sundar and Gray, Simon and Roberts, Tracey and Nicholls, John (2018) Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Mosleh, Ahmed and Mikhaylovskaya, Anastasia and Kotov, Anton and Pourcelot, Theo and Aksenov, Sergey and Kwame, James and Portnoy, Vladimir (2017) Modelling of the superplastic deformation of the near-a titanium alloy (Ti-2.5AL-1.8MN) using arrhenius-type constitutive model and artificial neural network. Metals, 7 (12). ISSN 0379-6779

Marini, Daniele and Corney, Jonathan R. (2017) A methodology for near net shape process feasibility assessment. Production and Manufacturing Research, 5 (1). pp. 390-409. ISSN 2169-3277

Mandal, Paranjayee and Al Mamun, Abdullah and Lalvani, Himanshu and Da Silva, Laurie and Perez, Marcos and Muir, Lisa (2017) Impact of various heat treatments on the microstructure evolution and mechanical properties of hot forged 18CrNiMo7-6 steel. In: Heat Treat 2017, 2017-10-24 - 2017-10-26.

Marini, Daniele and Corney, Jonathan (2017) A methodology for assessing the feasibility of producing components by flow forming. Production and Manufacturing Research, 5 (1). pp. 210-234. ISSN 2169-3277

McMaster, Thomas A. M. and Yan, Xiu T. (2017) The design of a robotic arm link using functionally graded materials : a case study. In: 68th International Astronautical Congress (IAC), 2017-09-25 - 2017-09-29.

McMaster, Thomas A. M. and Yan, Xiu T. (2017) A methodology for design of lightweight robotic arm links in harsh environments. In: 68th International Astronautical Congress (IAC), 2017-09-25 - 2017-09-29.

Morar, Nicolau and Roy, Rajkumar and Mehnen, Jorn and Nicholls, J.R. and Gray, Simon (2017) The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C. International Journal of Fatigue. 112–120. ISSN 0142-1123

Mir, Amir and Luo, Xichun and Cheng, Kai and Cox, Andrew (2017) Investigation of influence of tool rake angle in single point diamond turning of silicon. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

McKendry, D.A. and Whitfield, R.I. and Duffy, A.H.B. (2017) Key findings to support the development of a framework for the implementation of Product Lifecycle Management in Engineer to Order products. In: 15th International Conference on Manufacturing Research, 2017-09-05 - 2017-09-07, University of Greenwich.

Ma, Junxia and Ding, Feng and Xiong, Weili and Yang, Erfu (2017) Combined state and parameter estimation for Hammerstein systems with time-delay using the Kalman filtering. International Journal of Adaptive Control and Signal Processing, 31 (8). pp. 1139-1151. ISSN 0890-6327

McTeague, Chris and Duffy, Alex and Campbell, Gerard and Grealy, Madeleine and Hay, Laura and Pidgeon, Laura and Vuletic, Tijana (2017) An exploration of design synthesis. In: ICED17, 21st International Conference on Engineering Design, 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Mourtzis, Dimitris and Vlachou, Eugenia and Tapoglou, Nikolaos and Mehnen, Jorn (2017) A cloud-based knowledge enriched framework for increasing machining efficiency based on machine tool monitoring. Proceedings for Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Macbeth, A.E. and Tomlinson, J. and Messenger, A.G. and Moore-Millar, K. and Michaelides, C. and Shipman, A.R. and Kassim, J.M. and Brockley, J.R. and Szczecinska, W. and Farrant, P. and Robinson, R. and Rodgers, J. and Chambers, J. and Upadhyaya, S. and Harries, M.J. (2017) Establishing and prioritizing research questions for the treatment of alopecia areata : the Alopecia Areata Priority Setting Partnership. The British journal of dermatology, 176 (5). pp. 1316-1320. ISSN 1365-2133

Marini, Daniele and Cunningham, David and Corney, Jonathan R (2017) Near net shape manufacturing of metal : a review of approaches and their evolutions. Proceedings for Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Mao, Yawen and Ding, Feng and Yang, Erfu (2017) Adaptive filtering-based multi-innovation gradient algorithm for input nonlinear systems with autoregressive noise. International Journal of Adaptive Control and Signal Processing. ISSN 0890-6327

Mehnen, Jörn and He, Hongmei and Tedeschi, Stefano and Tapoglou, Nikolaos (2017) Practical security aspects of the internet of things. In: Cybersecurity for Industry 4.0. Springer Series in Advanced Manufacturing . Springer International Publishing AG, Cham, pp. 225-242. ISBN 9783319506609

Marashi, J. and Yakushina, E. and Xirouchakis, P. and Zante, R. and Foster, J. (2017) An evaluation of H13 tool steel deformation in hot forging condition. Journal of Materials Processing Technology, 246. pp. 276-284. ISSN 0924-0136

Maialle, Giovanna and Jabbour, Ana Beatriz Lopes de Sousa and Arantes, Ariana Fernandes and Jabbour, Charbel José Chiappetta (2016) Environmental management maturity of local and multinational high-technology corporations located in Brazil : the role of business internationalization in pollution prevention. Producao, 26 (2). pp. 488-499. ISSN 1980-5411

Mohamed, Mohamed and Carty, David and Storr, John and Zuelli, Nicola and Blackwell, Paul and Savings, David (2016) Feasibility study of complex sheet hydroforming process : experimental and modelling. Key Engineering Materials, 716. pp. 685-691. ISSN 1013-9826

Mohamed, Mohamed and Elatriby, Sherif and Shi, Zhusheng and Lin, Jianguo (2016) Prediction of forming limit diagram for AA5754 using artificial neural network modelling. Key Engineering Materials, 716. pp. 770-778. ISSN 1013-9826

Marini, Daniele and Cunningham, David and Xirouchakis, Paul and Corney, Jonathan (2016) Flow forming : a review of research methodologies, prediction models and their applications. International Journal of Mechanical Engineering & Technology, 7 (5). pp. 285-315. ISSN 0976-6359

Marini, Daniele and Cunningham, David and Corney, Jonathan R. (2016) A methodology for assessing the feasibility of producing components by flow forming. In: Advances in Manufacturing Technology XXX. Advances in Transdisciplinary Engineering (ATDE), 3 . IOS Press, Loughborough University, pp. 67-72. ISBN 9781614996675

Mir, Amir Sarwar and Luo, Xichun and Sun, Jining (2016) The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon. Wear. ISSN 0043-1648

McDougall, Natalie and Wagner, Beverly and MacBryde, Jillian (2016) Exploring dynamic natural-resource-based capabilities for sustainable agri-food chains. In: Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies . Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 455-465. ISBN 9783319320960

McIntosh, Lynne and Falsafi, Javad and Fitzpatrick, Stephen and Blackwell, Paul L. (2016) Wear behaviour of laser cladded Ni-based WC composite coating for Inconel hot extrusion : practical challenges and effectiveness. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University. (In Press)

Mir, Amir Sarwar and Luo, Xichun and Siddiq, Amir (2016) Smooth particle hydrodynamics study of surface defect machining for diamond turning of silicon. International Journal of Advanced Manufacturing Technology. pp. 1-16. ISSN 0268-3768

Marashi, James and Zante, Remi Christophe and Foster, James (2016) Defining a method of evaluating die life performance by using finite element models (FEM) and a practical open die hot forging method. In: 19th International ESAFORM Conference on Material Forming – ESAFORM 2016, 2016-04-27 - 2016-04-29, Nantes Congress Center.

Mohamed, M.S. and Blackwell, P. (2016) The development of stress based continuum damage mechanics model for predicting the formability of Magnesium alloys under cold/warm stamping processes. In: 17th International Conference on Applied Mechanics and Mechanical Engineering, 2016-04-19 - 2016-04-21, Military Technical College.

Mohamed, M.S. and Ismail, A. (2016) Review on sheet metal forming process of aluminium alloys. In: 17th International Conference on Applied Mechanics and Mechanical Engineering, 2016-04-19 - 2016-04-21, Military Technical College.

Ma, Junxia and Ding, Feng and Yang, Erfu (2016) Data filtering-based least squares iterative algorithm for Hammerstein nonlinear systems by using the model decomposition. Nonlinear Dynamics, 83 (4). pp. 1895-1908. ISSN 0924-090X

Melville, Craig and Yan, Xiu T. and Gu, Lixiang (2016) Tiv model : an attempt at breaching the industry adoption barrier for new complex system design methodologies. In: Mechatronic Futures. Springer. (In Press)

Marini, D. and Cunningham, D. and Corney, J.R. (2015) Near net shape manufacturing of metal : a review of approaches and their evolutions. In: Proceedings from 23rd CAPE conference. UNSPECIFIED.

McKendry, DA and Whitfield, RI and Duffy, AHB (2015) Business and information management architectures for delivering Product Lifecycle Management (PLM) in Engineer To Order (ETO) products. In: ICCAS 2015. Royal Institution of Naval Architects. ISBN 9781909024335

Mir, Amir and Luo, Xichun and Siddiq, Amir (2015) Numerical simulation of triaxial test to determine the Druger-Prager parameters for silicon. In: Automation and Computing (ICAC), 2015 21st International Conference on. IEEE, Piscataway. ISBN 97809926801

Mamo, James and Farrugia, Philip and Borg, Jonathan and Wodehouse, Andrew and Grierson, Hilary and Kovasevic, Ahmed (2015) Using engineering design tools in multidisciplinary distributed student teams. In: 17th International Conference on Engineering and Product Design Education, 2015-09-03 - 2015-09-04, UK.

Marini, Daniele and Cunningham, David and Corney, Jonathan (2015) Systematic process selection for cold forging. In: 13th International Cold Forming Conference Proceedings. University of Strathclyde Publishing, Scotland, pp. 54-64.

Mohamed, Mohamed and Li, Nan and Wang, Liliang and EL Fakir, Omer and Lin, Jianguo and Dean, Trevor and Dear, John (2015) An investigation of a new 2D CDM model in predicting failure in HFQing of an automotive panel. In: 4th International Conference on New Forming Technology (ICNFT 2015). MATEC Web of Conferences . EDP Sciences. ISBN 9782759818235

Mediavilla, Miguel and Errasti, Ander and Mendibil, Kepa (2015) Framework for assessing the strategic plant role and deploying an improvement roadmap in global operations networks : an empirical study. Production Planning and Control, 26 (10). pp. 799-823. ISSN 0953-7287

Marini, Daniele and Cunningham, David and Corney, Jonathan (2015) A review of flow forming processes and mechanisms. In: Key Engineering Materials. Key Engineering Materials, 651-653 . Trans Tech Publications Ltd, pp. 750-758. ISBN 9783038354710

Mir, Amir and Luo, Xichun and Siddiq, M. Amir (2015) A numerical investigation on the effect of tool geometry in single point diamond turning of silicon. In: Proceedings Of The 15th International Conference Of The European Society For Precision Engineering And Nanotechnology. euspen, pp. 317-318. ISBN 9780956679079

Marshall, Pamela and Whitfield, Robert Ian and Duffy, Alex and Haffey, Mark (2015) A new model for high value meetings. In: 22nd EurOMA 2015, 2015-06-26 - 2015-07-01, University of Neuchâtel. (In Press)

Micheli, Leonardo and Sarmah, Nabin and Reddy, K. S. and Luo, Xichun and Mallick, Tapas K. (2015) Design, development, and analysis of a densely packed 500x concentrating photovoltaic cell assembly on insulated metal substrate. International Journal of Photoenergy, 2015. ISSN 1110-662X

Micheli, Lenoardo and Sarmah, Nabin and Luo, Xichun and Reddy, K.S. and Mallick, Tapas K. (2014) Design a 16-cell densely packed receiver for high concentrating photovoltaic applications. Energy Procedia, 54. pp. 185-198. ISSN 1876-6102

Micheli, Leonardo and Sarmah, Nabin and Luo, Xichun and Reddy, K.S. and Mallick, Tapas K. (2014) Development of a novel 16-cell densely packed 500×CPV assembly on insulated metal substrate. Energy Procedia, 54. pp. 185-198. ISSN 1876-6102

Mair, Gordon and Robinson, Andrew and Storr, John (2014) Applying augmented reality to the concept development stage of the total design methodology. In: Virtual, Augmented and Mixed Reality. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI, 8526 . Springer-Verlag, Berlin, pp. 414-425. ISBN 9783319074634 (In Press)

Maritz, Alex and de Waal, Anton and Buse, Stephan and Herstatt, Cornelius and Lassen, Astrid and Maclachlan, Ross (2014) Innovation education programs : toward a conceptual framework. European Journal of Innovation Management, 17 (2). pp. 166-182. ISSN 1460-1060

Matsumoto, Mitsutaka and Ijomah, Winifred (2013) Remanufacturing. In: Handbook of Sustainable Engineering. Springer Netherlands, Dordrecht, pp. 389-408. ISBN 9781402089381

Mandal, P. and Beake, B.D. and Paul, S. (2013) Effect of deposition parameters on TiAlN coating using pulsed DC CFUBMS. Surface Engineering, 29. pp. 287-295. ISSN 0267-0844

Micheli, L. and Sarmah, N. and Luo, Xichun and Reddy, K.S. and Mallick, T. K. (2013) Thermal effect of micro-fin geometry on a silicon receiver for CPV cooling purpose. In: Proceedings 28th European Photovoltaic Solar Energy Conference and Exhibition. WIP, Munich, pp. 668-971. ISBN 3936338337

Moroni, F. and Palazzetti, Roberto and Zucchelli, A. and Pirondi, A. (2013) A numerical investigation on the interlaminar strength of nanomodified composite interfaces. Composites Part B: Engineering, 55. pp. 635-641.

Mandal, Paranjayee and Paul, Soumitra (2013) Effect of alloyed target vis-à-vis pure target on machining performance of TiAlN coating. International Journal of Advanced Manufacturing Technology, 66 (5-6). pp. 721-731. ISSN 0268-3768

Mair, Gordon (2013) Could transparent telepresence replace real presence? In: ICCMTD 2013, 2013-05-02 - 2013-05-04.

Moore, Karena and Thomson, Avril and Liggat, John and Shilton, Simon and Wiggins, Sally (2013) Off the top of your head : what makes a wig work for alopecians? Journal of Investigative Dermatology, 133 (5). p. 1394. ISSN 0022-202X

Micheli, L. and Sarmah, N. and Luo, X. and Reddy, K.S. and Mallick, T.K. (2013) Opportunities and challenges in micro- and nano-technologies for concentrating photovoltaic cooling : a review. Renewable and Sustainable Energy Reviews, 20 (April). pp. 595-610. ISSN 1364-0321

Mendibil, Kepa and Rudberg, Martin and Baines, Tim and Errasti, Ander (2013) Operations strategy and development. In: Global production networks. CRC Press, Boca Raton, pp. 61-92. ISBN 9781466562929

Mair, Gordon (2013) How fiction informed the development of telepresence and teleoperation : an historical perspective. In: HCI International 2013, 2013-07-21 - 2013-07-26.

McAdam, Rodney and Antony, Jiju and Kumar, Maneesh and Hazlett, Shirley A (2013) Absorbing new knowledge in small and medium-sized enterprises : a multiple case analysis of Six Sigma. International Small Business Journal, 31 (7). pp. 785-810. ISSN 0266-2426

Muñoz-García, C and Conde, A and Garcia, I and Fuentes, G.G. and Almandoz, E. and García, J.A. and Rodríguez, R.J. and Qin, Yi (2012) Friction, nanowear and corrosion properties of electroplated Nickel surfaces after dual implantation of Cr+ and N2+ ions : Influence of the implantation energy of the N2+ ions. Surface and Coatings Technology, 210. pp. 46-53. ISSN 0257-8972

Mair, Gordon and Divis, Pavel and Corney, Jonathan (2011) Desktop scanner based metrology. In: M2VIP 18th International Conference, 2011-12-06 - 2011-12-07.

MacLachlan, Ross John Robert (2011) Engaging electronics projects for design students through open design approaches. In: DS 69. Design Society, Glasgow, pp. 466-471. ISBN 9781904670339

Macintyre, Fraser Robert and Thomson, Avril and Wodehouse, Andrew (2011) Identification, translation and realisation of requirements for a knowledge management system in an engineering design consultancy. In: 18th International Conference on Engineering Design, 2011-08-01.

Minak, Giangiacomo and Palazzetti, Roberto and Trendafilova, Irina and Zucchelli, Andrea (2010) Localization of a delamination and estimation of its length in a composite laminate beam by the VSHM and pattern recognition methods. Mechanics of Composite Materials, 46 (4). pp. 387-394. ISSN 0191-5665

Mendibil, Kepa and Bititci, Umit and Smith, Marisa and Wang, Dongbo and Lu, L. (2010) Towards a framework for collaborative innovation. In: 17th International Euroma Conference - Managing Operations in Service Economies, 2010-06-06 - 2010-06-09.

MacGregor, Steven P. and Fontrodona, Joan and Hernandez, Jose Luis (2010) Towards a sustainable innovation model for small enterprises. In: Innovative CSR. Greenleaf, Sheffield. ISBN 9781906093358

Maguire, Catherine and Bititci, Umit and Mendibil, Kepa (2010) An exploratory study of organisational transformation in manufacturing SMEs. PhD thesis, UNSPECIFIED.

MacBryde, Jillian and Paton, Steve and Mendibil, Kepa (2010) From manufacturing to high value manufacturing : exploring this transition. Journal of General Management, 36 (2). pp. 65-79. ISSN 0306-3070

Medellin, H. and Corney, J. and Ritchie, J.M. and Lim, T. (2010) Automatic generation of robot and manual assembly plans using octrees. Assembly Automation, 30 (2). pp. 173-183. ISSN 0144-5154

Moultrie, James and Livesey, Finbarr and Malvido, Cecilia and Riedel, Johann and Beltagui, Ahmad and Pawar, Kul and Nixon, Bill and MacBryde, Jillian and Martinez, Veronica and Demian, Peter and Evans, Steve (2009) Developing a national design scoreboard. In: 6th International Conference on Performance Measurement and Management, 2009-07-01. (Unpublished)

MacBryde, Jillian C. and Paton, Steve and Mendibil, Kepa and Davidson, Laura (2009) Towards a model of high-value operational activity. In: 16th Annual Euroma Conference, Implementation - Realising Operational Management Knowledge, 2009-06-14 - 2009-06-17.

Mackay, David and Ter Wijlen, Edwin D. and Mendibil, Kepa and Mantel, Ronald J. (2009) Building dynamic capabilities through operations strategy: an empirical example. In: European operations management association, 2009-06-14 - 2009-06-17.

Mackay, David (2009) Action research as academic anti-freeze for organisational change. In: Euroma Annual Conference 2009, 2009-06-14 - 2009-06-17.

Mezosi, G and Strain, M.J. and Furst, S and Wang, Z and Yu, S and Sorel, M. (2009) Unidirectional bistability in AlGaInAs microring and microdisk semiconductor lasers. IEEE Photonics Technology Letters, 21 (2). pp. 88-90.

Macbryde, Jillian and Mendibil, Kepa and Paton, Steve and Davidson, Laura and Bititci, Umit (2009) Manufacturing in Scotland. Working paper. Strathclyde Institute for Operations Management, Glasgow, UK.

McKay, Alison and Chase, Scott and Garner, Steven and Jowers, Iestyn and Prats, Miquel and Hogg, David and Chau, Hau Hing and de Pennington, Alan and Earl, Christopher and Lim, Sungwoo AHRC (Funder), EPSRC (Funder) (2009) Design synthesis and shape generation. In: Designing for the 21st Century: Interdisciplinary Methods and Findings. Gower Publishing, UK. ISBN 9781409402404

Maclachlan, Ross and Ion, William and Kochanowska, Rowena and Hansen, Saskia and Herstatt, Cornelius and Buse, Stephan and Galla, Randolph and Boer, Harry (2009) A transferable model for innovative joint postgraduate degree programme development. In: 11th international conference on engineering and product design education, 2009-09-10 - 2009-09-11.

Mahanti, R. and Antony, J. (2009) Six Sigma in the Indian software industry: some observations and results from a pilot survey. TQM Journal, 21 (6). pp. 549-564. ISSN 1754-2731

Mendibil, Kepa and Bititci, Umit S. and Maguire, Catherine and Montgomery, Les and Woodburn, Wyllie (2008) Organisational transformation: the Highland Spring story. European Case Clearing House.

Mackay, David and Maguire, Catherine and Bititci, Umit (2008) Addressing the duality of theory and practice in management research:- conducting useful collaborative research which creates relevant outputs to the satisfaction of all stakeholders. In: British Academy of Management Conference 2008, 2008-09-09 - 2008-09-11.

Malvido, Cecilia and Moultrie, James and Livesey, T.F. and Pawar, Kul and Riedel, Johann and Beltagui, Ahmad and MacBryde, Jillian C. and Martinez, V. and Evans, Steve and Nixon, William and Demian, Peter (2008) Towards a national design scoreboard: a model to enable comparison of performance between countries. In: PICMET: Technology management for a sustainable economy, 2008-07-27 - 2008-08-01.

Mackay, D. and Bititci, U. and Ackermann, F. and Ates, Aylin and Bourne, M. and Davies, J. and Gibb, S. and MacBryde, Jillian C. and Maguire, C. and Shafti, F. and Van Der Meer, R.B. (2008) The process of managing performance: an inductive model. In: 15th International Euroma Conference, 2008-06-15 - 2008-06-18.

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T. and Ritchie, J.M. (2008) Octree-based production of near net shape components. IEEE Transactions on Automation Science and Engineering, 5 (3). pp. 457-466. ISSN 1545-5955

Moultrie, James and Livesey, Finbarr and Malvido, Cecilia and Riedel, Johann and Beltagui, Ahmad and Pawar, Kul and Nixon, Bill and MacBryde, Jillian and Martinez, Veronica and Demian, Peter and Evans, Steve (2008) Developing a national design scoreboard. In: Design Research Society Conference: Undisciplined, 2008-07-16 - 2008-07-19.

Mackay, David (2008) Process of managing performance: An inductive model. In: Euroma 2008, 2008-06-15 - 2008-06-18.

MacBryde, Jillian C. and Paton, Steve and Mendibil, Kepa and Davidson, Laura (2008) Operations management in high value manufacturing. In: European operations management association, 2008-06-15 - 2008-06-18.

Mackay, David and Maguire, Catherine and Bititci, Umit S. and Ackermann, Fran and Gibb, Stephen and Davies, John B. and Van der Meer, Robert and MacBryde, Jillian C. and Ates, Aylin and Shafti, Farhad (2008) Towards a mixed method approach for the multidisciplinary investigation of management processes. In: EURAM Annual Conference, 2008-05-14 - 2008-05-17.

Mathers, Nicholas Edward and Stone, Angela and Thomson, Avril (2008) A new viewpoint on inclusive design practice. In: 2nd International Conference on Design Principles and Practices, 2008-01-09 - 2008-01-11.

Mackay, David and Bititci, Umit S. and Maguire, Catherine and Ates, Aylin (2008) Delivering sustained performance through a structured business process approach to management. Measuring Business Excellence, 12 (4). pp. 22-37. ISSN 1368-3047

Maguire, Catherine and Bititci, U. and Ackermann, F. and Ates, Aylin and Bourne, M. and Davies, J. and Gibb, S. and MacBryde, Jillian C. and Mackay, D. and Shafti, F.S. and Van Der Meer, R.B. (2008) Learning to SEE : is scanning the external environment key to sustainability? In: 15th International Annual European Operations Management Association, EurOMA, 2008-01-01.

Maguire, Catherine and Mendibil, Kepa and Bititci, Umit (2008) Towards the development of a model of business transformation : an empirical study. In: 8th European Academy of Management Conference, 2008-05-14 - 2008-05-17.

Moultrie, R. and Riedel, J. and Beltagui, A. and Malvido, C. and Livesey, T.F. and Pawar, K. and Nixon, B. and MacBryde, Jillian C. and Demian, P. and Evans, S. and Martinez, V. (2008) Exploratory study to capture design expenditure in firms. In: EIASM 15th International Product Development Management Conference, 2008-06-29 - 2008-07-01.

Mair, G. and Cunningham, D. and Grierson, H. and Ion, W. (2007) An integrated digital design and manufacture studio for educating future product designers. In: 9th International Conference on Engineering and Product Design Education, 2007-09-13 - 2007-09-14.

Medellin, H. and Lim, T.C. and Corney, J.R. and Ritchie, J.M. and Davies, J.B.C. (2007) Automatic subdivision and refinement of large components for rapid prototyping production. Journal of Computing and Information Science in Engineering, 7 (3). pp. 249-258. ISSN 1530-9827

Miller, K. and Mair, G.M. (2007) Implications of inclusive design for design education. In: Shaping the Future? Hadleys Ltd, pp. 291-296. ISBN 9780955394218

Mair, G.M. (2007) Towards transparent telepresence. In: Virtual reality. Lecture Notes in Computer Science . Springer-Verlag, New York, pp. 300-309. ISBN 3540733348

Ma, Yanling and Pan, Wenke and Qin, Yi (2007) Concurrent design and manufacture for the development of a new bi-axial tensile-testing machine. In: Proceedings of the 20th International Conference on Computer-Aided Production Engineering (CAPE 2007). Glasgow Caledonian University, Glasgow, pp. 81-90. ISBN 1905866143

Meehan, J.S. and Duffy, A.H.B. and Whitfield, R. I. (2007) Supporting 'design for reuse' with modular design. Concurrent Engineering: Research and Applications, 15 (2). pp. 141-155. ISSN 1063-293X

MacGregor, Steven P. and Bianchi, Mattia and Hernandez, Jose Luis and Mendibil, Kepa (2007) Towards the tipping point for social innovation. In: International Conference on Sustainable Innovation, 2007-10-29 - 2007-10-30.

Mendibil, Kepa and Hernandez, Jose Luis and Espinach, Xavier and Garriga, Elisabet and MacGregor, Steven P. (2007) How can CSR practices lead to successful innovation in SMEs?,. In: European Operations Management Association, 2007-06-17 - 2007-06-20.

Mann, Steve and Janzen, Ryan and Post, Mark (2006) Hydraulophone design considerations : absement, displacement, and velocity-sensitive music keyboard in which each key is a water jet. In: MULTIMEDIA '06. ACM, New York, pp. 519-528. ISBN 1595934472

Ma, Yanling and Qin, Yi and Balendra, R. (2006) Upper-bound analysis of pressure-assisted injection forging of thick-walled tubular components. International Journal of Mechanical Sciences, 48 (10). pp. 1172-1185. ISSN 0020-7403

Martinez, V. and Bititci, U. (2006) Aligning value propositions in supply chains. International Journal of Value Chain Management, 1 (1). pp. 6-18. ISSN 1741-5357

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T.C. and Ritchie, J.M. (2006) Algorithms for the physical rendering and assembly of octree models. Computer-Aided Design, 38 (1). pp. 69-85. ISSN 0010-4485

Mendibil, K. and MacBryde, J.C. (2006) Factors that affect the design and implementation of team-based performance management systems. International Journal of Productivity and Performance Management, 55 (2). pp. 118-142. ISSN 1741-0401

Miller, K. and Mair, G.M. (2006) Multimodality - a stimulant to design creativity? In: Proceedings of EDPE 06, 2006-01-01.

Ma, Yanling and Qin, Yi and Balendra, Rajendram (2005) Upper-bound solution and experimental validation for the analysis of pressure-assisted injection forging. In: 3rd International Conference on Manufacturing Research - ICMR 2005, 2005-09-06 - 2005-09-09.

Ma, Yanling and Qin, Yi and Balendra, Rajendram (2005) Experimental investigation on mechanical properties of rubber-like materials under biaxial tensile loading conditions. In: 3rd International Conference on Manufacturing Research - ICMR 2005, 2005-09-06 - 2005-09-09.

Ma, Yanling and Qin, Yi and Balendra, Raj (2005) Forming of hollow-gear-shafts with pressure-assisted injection forging (PAIF). Journal of Materials Processing Technology, 167 (2-3). pp. 294-301. ISSN 0924-0136

MacBryde, J.C. and Mendibil, K. (2005) Designing effective team-based performance measurement systems : an integrated approach. Production Planning and Control, 16 (2). pp. 208-225. ISSN 0953-7287

Mair, G.M. and Miller, K. and Anderson, A.H. (2005) Multimodal design imaging - a vehicle for crossing design boundaries. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference. Taylor & Francis, London, pp. 27-32. ISBN 0 415 39118 0

McGill, Lou and Nicol, David and Littlejohn, Allison and Grierson, Hilary and Juster, Neal and Ion, William J. (2005) Creating an information-rich learning environment to enhance design student learning: challenges and approaches. British Journal of Educational Technology, 36 (4). pp. 629-642. ISSN 0007-1013

Ma, Yanling and Qin, Yi and Balendra, Rajendram (2004) Concurrent design and manufacture in pressure-assisted injection forging of tubular components. In: 2nd International Conference on Manufacturing Research (ICMR2004), 2004-09-06.

Ma, Yanling and Qin, Yi and Balendra, Rajendram (2004) Process ranges of pressure-assisted injection forging of thick-walled tubular components. In: 2nd International Conference on Manufacturing Research (ICMR2004), 2004-09-06.

Manarvi, I.A. and Juster, N.P. (2004) Using FE simulation for flexible parts and assembly design in automotive industry. In: FISITA World Automotive Congress, 2004-05-23 - 2004-05-27. (Unpublished)

Manarvi, I.A. and Juster, N.P. (2004) Framework of an integrated tolerance synthesis model and using FE simulation as a virtual tool for tolerance allocation in assembly design. Journal of Materials Processing Technology, 150 (1-2). pp. 182-193. ISSN 0924-0136

McKay, S. (2004) A Stereoscopic Display. PCT/GB2004/001364.

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T.C. and Ritchie, J.M. (2004) An automated system for the assembly of octree models. Assembly Automation, 24 (3). pp. 297-312. ISSN 0144-5154

Manarvi, I.A. and Juster, N.P. (2003) Combining FE and tolerance synthesis for aesthetic assembly design of flexible components. In: Advances in manufacturing technology XVII. Professional Engineering,, pp. 247-252. ISBN 9781860584121

Ma, Yanling and Qin, Yi and Balendra, Rajendram and Deng, G.H. (2003) Clamping design for the biaxial tension test of rubbers. In: 1st International Conference on Manufacturing Research - ICMR2003, 2003-09-08.

McElroy, L.B. and Clarke, J.A. and Elrick, B.F. and Telfer, S. (2003) Putting theory into practice: using simulation to meet new building performance legislation requirements. In: Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference. Chartered Institution of Building Services Engineers (CIBSE). Chartered Institution of Building Services Engineers (CIBSE). ISBN 190328743X

Marshall, S. and Hamid, M. and Harvey, N.R. (2003) Genetic algorithm optimisation of multidimensional grey-scale soft morphological filters with applications in archive film restoration. IEEE Transactions on Circuits and Systems for Video Technology, 13 (5). pp. 406-416. ISSN 1051-8215

MacBryde, J.C. and Mendibil, K. (2003) Designing performance measurement systems for teams: Theory or practice. Management Decision, 41 (8). pp. 722-733.

McElroy, L.B. and Elrick, B.F.F. and Telfer, S. and Elliot, G. (2003) A systolic array information strategy for real-time automatic control. In: Proceedings of the IFAC International Symposium - Advanced Information Processing in Automatic Control. International Federation of Automatic Control (IFAC), pp. 68-74.

Ma, Yanling and Qin, Yi and Balendra, Rajendram (2002) Experimental and FE investigation of performance of polymers under confined compression conditions by using a simplified configuration. In: Advances in Manufacturing Technology XVI. Wiley, pp. 198-203. ISBN 1860583784

Martinez, Veronica and Bititci, Umit (2002) The value matrix : a framework to describe and create value. In: British Academy of Management Conference 2002, 2002-09-09 - 2002-09-11.

McDougal, G and Kelly, J and Hinks, A.J. and Bititci, Umit (2002) A review of the leading performance measurement tools for assessing buildings. Journal of Facilities Management, 1 (2). pp. 142-153.

Mendibil Telleria, Kepa and Little, Derek and MacBryde, Jill (2002) Managing processes through teamwork. Business Process Management Journal, 8 (4). pp. 338-350. ISSN 1463-7154

Mair, G.M. and Clark, J.E. and Hardiman, R.J. and McKay, S. and Mason, S. (2001) Low bandwidth transatlantic autostereoscopic telepresence. In: To be ascertained, 1900-01-01.

Maver, T.W. and Harrison, C.S. and Grant, P.M. (2001) Virtual environments for special needs - changing the VR paradigm. In: Computer aided architectural design futures 2001, proceedings. Springer, Dordrecht, pp. 151-159. ISBN 0792370236

McKay, S. and Mair, G.M. and Mason, S. and Revie, Kenneth (2000) Membrane mirror based autostereoscopic display for teleoperation and telepresence. In: Proceedings of SPIE. SPIE, UK, pp. 198-207. ISBN 9780819435750

Mair, G.M. (1999) Transparent telepresence research. Industrial Robot: An International Journal, 26 (3). pp. 209-215. ISSN 0143-991X

Mair, G.M. and Clark, J.E. and Fryer, Richard and Hardiman, R.J. and McGregor, Douglas R. and Retik, A. and Retik, N. and Revie, Kenneth (1998) Hybrid virtual reality and telepresence utilising mobile phone technology. In: Proceedings of SPIE. SPIE, Boston, pp. 60-70. ISBN 9780819429858

Mair, G.M. and Clark, J.E. and Fryer, Richard and Hardiman, Roger and McGregor, Douglas R. and Retik, Arkady and Retik, Nora and Revie, Kenneth (1998) Integrated telepresence, virtual reality, and mobile communications - a project report. In: Mechatronics '98: Proceedings of the 6th Uk Mechatronics Forum. Pergamon, UK, pp. 805-810. ISBN 0-08-040009-1

Manfaat, D. and Duffy, A.H.D. and Lee, B.S. (1998) SPIDA: Abstracting and generalizing layout design cases. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 12 (2). pp. 141-159. ISSN 0890-0604

Mair, G.M. (1997) Telepresence - the technology and its economic and social implications. In: Technology and Society, 1997-06-20 - 1997-06-21.

McDevitt, L and Carrie, Allan and Bititci, Umit (1997) Viable performance measurement systems. In: First International Conference. Mechanical Engineering Publ, UK, pp. 287-293. ISBN 1860580661

Mair, G.M. and Fryer, Richard and Heng, J.G. and Clark, J.E. and Sheat, Dennis (1996) An experiment in long distance telepresence using ISDN2. In: Proceedings of Mechatronics '96 and M2VIP '96. IMechE, UK.

Macbryde, Jillian and Bititci, Umit (1996) Quality management in higher education : a double edged sword. In: Proceedings of the EFQM Learning Edge Conference, 1996-04-01.

Mair, G.M. (1996) Mastering Manufacturing (Mandarin Translation). Macmillan, Taiwan. ISBN 957-8894-83-X

Mair, G.M. and Fryer, Richard and Heng, J.G. and Clark, N. (1995) Anthropomorphic telepresence systems - design issues. In: Proceedings of the 5th International Conference - INTERFACE to Real and Virtual Worlds. EC2 & Cie, Paris, France, pp. 126-135. ISBN 2-2-910085-15-5

Mair, G.M. (1994) Industrial robotics and automation. In: Mechanical Engineer's Reference Book. Butterworth - Heinemann, UK, 5/18-5/27. ISBN 0750642181; 9780750642187

Mair, G.M. and Heng, G. and Fryer, Richard (1994) The design of mechatronic anthropomorphic sensor platforms. In: Mechatronics - the Basis for New Industrial Development. Computational Mechanics Inc, Southampton, UK; and Boston, USA, pp. 291-296. ISBN 1 85312 367 6

Mair, G.M. (1993) Machine tool control elements. In: Manufacturing Engineer's Reference Book. Butterworth - Heinemann, UK, 12/1-12/20. ISBN 0 7506 1154 5

Mair, G.M. (1993) Mastering Manufacturing. Macmillan, UK. ISBN 0-333-54230-4

Mair, G.M. (1991) Industrial robotics and automation. In: Manufacturing Engineer's Reference Book. Butterworth - Heinemann, UK, pp. 73-87. ISBN 0 7506 1154 5

MacCallum, K.J. and Duffy, A.H.B. (1989) Computer representation of numerical expertise for preliminary ship design. Marine Technology, 26 (4). pp. 289-302. ISSN 0025-3316

Mair, G.M. (1988) Industrial Robotics. Prentice Hall, UK, USA. ISBN 0-13-463209-5

MacCallum, K.J. and Duffy, A.H.B. (1987) An expert system for preliminary numerical design modelling. Design Studies, 8 (4). pp. 231-237. ISSN 0142-694X

N

Niu, Cong and Yan, Xiutian (2018) Energy optimization path planning for battery-powered agricultural rover. MATEC Web of Conferences, 173. ISSN 2261-236X

Ntovas, Michail and Blackwell, Paul (2017) A new high and moderate speed servo-hydraulic forging simulator capabilities and process optimization. In: Proceedings of the 20th International ESAFORM Conference on Material Forming. AIP Conference Proceedings, 1896 . AIP Publishing, [Melville, New York]. ISBN 978-0-7354-1580-5

Nair, Anup Karath and D'Adderio, Luciana and Corney, Jonathan (2017) Business models : a routine dynamics reconceptualization. In: British Academy of Management 2017 Conference. British Academy of Management, Warwick.

Niesten, Eva and Jolink, Albert and Lopes de Sousa Jabbour, Ana Beatriz and Chappin, Maryse and Lozano, Rodrigo (2016) Sustainable collaboration : the impact of governance and institutions on sustainable performance. Journal of Cleaner Production. pp. 1-6. ISSN 0959-6526

Nair, Anup Karath and Tiwari, Rajnish and Buse, Stephan (2016) Emerging patterns of Grassroots Innovations : results of a conceptual study based on selected cases from India. In: Lead Market India. India Studies in Business and Economics . Springer, Cham, Switzerland, pp. 65-95. ISBN 9783319463902

Nagel, U. and Yang, L. and Kao, C. C. and Thomason, J. L. (2016) Effects of thermal recycling temperatures on the reinforcement potential of glass fibers. Polymer Composites. ISSN 0272-8397

Nair, Anup Karath (2015) From counting in management to counting on management : making social science research matter. In: BAM 2015: The 29th Annual Conference of the British Academy of Management Conference, 2015-09-08 - 2015-09-10, University of Portsmouth.

Nair, Anup Karath (2015) Innovating and the dynamics of temporal scaffolding. In: 31st EGOS Colloquium, 2015-07-02 - 2015-07-04, ALBA Graduate Business School at The American College of Greece.

Nicol, David and Thomson, Avril and Breslin, Caroline (2014) Rethinking feedback practices in higher education : a peer review persepective. Assessment and Evaluation in Higher Education, 39 (1). pp. 102-122. ISSN 0260-2938

Noordin, Nora and Bititci, Umit and Van Der Meer, Robert (2011) Collaborative decision-making in supply chain: the impact of e-business technology on level of trust. In: Advances in Production Management Systems (APMS) 2011 International Conference, 2011-09-26 - 2011-09-28.

Nudurupati, Sai and Bititci, Umit and Kumar, V. and Chan, F.T.S. (2011) State of the art literature review on performance measurement. Computers and Industrial Engineering, 60 (2). pp. 279-290. ISSN 0360-8352

Nicol, David and Littlejohn, Allison and Grierson, Hilary (2005) The importance of structuring information and resources within shared workspaces during collaborative design learning. Open Learning: The Journal of Open and Distance Learning, 20 (1). pp. 31-49. ISSN 0268-0513

Nudurupati, Sai and Bititci, Umit and Maddocks, S (2003) Enhancing collaboration through web enabled performance measurement system. In: Collaborative Systems for Production Management. IFIP Advances in Information and Communication Technology . Springer. ISBN 978-1-4020-7542-1

Nudurupati, Sai and Bititci, Umit (2002) Driving continuous improvement. Manufacturing Engineer, 81 (5). pp. 230-235.

O

Ojo, A.O. and McCallum, F. and Andreu, A. and Heyes, A.L. (2018) On the use of phosphor thermometry for temperature monitoring in manufacturing processes. In: 1st International Conference on Phosphor Thermometry, 2018-07-25 - 2018-07-27, Strathclyde University.

Onyeiwu, Chimaeze and Hird, Abigail (2018) Innovative approach to variation mapping in craft-based textile manufacturing. In: International Conference on Manufacturing Research, 2018-09-11 - 2018-09-13. (In Press)

Onyeiwu, Chimaeze and Yang, Erfu and Rodden, Tony and Yan, Xiu-Tian and Zante, Remi C and Ion, William (2017) In-process monitoring and quality control of hot forging processes towards Industry 4.0. In: Industrial Systems in the Digital Age Conference 2017, 2017-06-20 - 2017-06-21, University of Glasgow.

Okoh, C. and Roy, R. and Mehnen, J. (2017) Maintenance informatics dashboard design for through-life engineering services. Procedia CIRP, 59. 166 – 171. ISSN 2212-8271

Okoh, C. and Roy, R. and Mehnen, J. (2017) Predictive maintenance modelling for through-life engineering services. Procedia CIRP, 59. 196–201. ISSN 2212-8271

Olejnik, Lech and Rosochowski, Andrzej (2015) Wytwarzanie wielofunkcyjnych blach do tłoczenia za pomocą przyrostowego odkształcania w kanale kątowym : Production of tailored blanks by Incremental ECAP. Obrobka Plastyczna Metali, 26 (4). pp. 307-324. ISSN 0867-2628

Olejnik, Lech and Golinski, Jacek and Rosochowski, Andrzej (2015) Wytwarzanie wielofunkcyjnych blach techniką ścinania. Prace Naukowe Politechniki Warszawskiej Mechanika, 267. pp. 155-160. ISSN 0137-2335

Olejnik, Lech and Chrominski, Witold and Rosochowski, Andrzej and Lipinska, Marta and Lewandowska, Malgorzata (2014) Incremental ECAP as a novel tool for producing ultrafine grained aluminium plates. IOP Conference Series: Materials Science and Engineering, 63 (1). ISSN 1757-899X

Olejnik, L. and Rosochowski, A. (2009) Incremental method of equal-channel angular pressing (ECAP). Przeglad Mechaniczny (10). pp. 22-27. ISSN 0033-2259

Olejnik, L. and Kulczyk, M. and Pachla, W. and Rosochowski, A. (2009) Hydrostatic extrusion of UFG aluminium. International Journal of Material Forming, 2 (Suppl ). pp. 621-624. ISSN 1960-6206

Olejnik, L. and Presz, W. and Rosochowski, A. (2009) Backward extrusion using micro-blanked aluminium sheet. International Journal of Material Forming, 2 (Suppl ). pp. 617-620. ISSN 1960-6206

Olejnik, L. and Rosochowski, A. and Richert, M. (2008) Incremental ECAP of plates. Materials Science Forum, 548-586. pp. 108-113. ISSN 1662-9760

O'Hare, Lynne (2008) Continuum Simulation of Fluid Flow and Heat Transfer in Gas Microsystems. PhD thesis, UNSPECIFIED.

Olejnik, L. and Rosochowski, A. (2008) Scaled-up ECAP with enhanced productivity. Steel Research International, 2. pp. 439-447. ISSN 1611-3683

Olejnik, L. and Rosochowski, A. (2008) Using ICFG guidelines for developing ECAP with enhanced productivity. In: 41st ICFG Plenary Meeting, 1900-01-01.

O'Hare, L. and Reese, J.M. (2007) Numerical models of gas flow and heat transfer in microscale channels: capturing rarefaction behaviour using a constitutive scaling approach. In: 5th International Conference on Nanochannels, Microchannels and Minichannels, 2007-06-18 - 2007-06-20.

O'Hare, L. and Scanlon, T.J. and Reese, J.M. (2006) Gas flow through microscale orifice plates. In: Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels. ASME, p. 96193. ISBN 0791837785

O'Donnell, F. and Duffy, A.H.B. (2002) Modelling design development performance. International Journal of Operations and Production Management, 22 (11). pp. 1198-1221. ISSN 0144-3577

O'Donnell, F.J. and Duffy, A.H.B. (2001) Design activity modelling : a performance viewpoint. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

O'Donnell, F.J. and Duffy, A.H.B. (2001) Performance management at design actvity level. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

P

Pérez, Marcos and Dumont, Christian and Nodin, Olivier and Nouveau, Sebastien (2018) Impact of forging direction on the recrystallization behaviour of nickel base superalloy AD730 billet material at subsolvus temperatures. Materials Characterization, 146. pp. 169-181. ISSN 1044-5803

Perez, Marcos and Dumont, Christian and Nodin, Olivier and Nouveau, Sebastien (2018) Impact of forging direction on the recrystallization behavior of nickel based superalloy AD730 billet material at subsolvus temperature. In: EuroSuperalloys 2018, 2018-09-09 - 2018-09-13, Oxford.

Paterson, David A.P. and Ijomah, Winifred and Windmill, James F.C. (2018) Elastic constant determination of unidirectional composite via ultrasonic bulk wave through transmission measurements : a review. Progress in Materials Science, 97. pp. 1-37. ISSN 0079-6425

Post, Mark and Li, Junquan (2018) Proof of concept study for small planetary rovers using tensegrity structure on Venus. In: 16th Reinventing Space Conference, 2018-10-30 - 2018-11-01, London. (In Press)

Paterson, David A. P. and Kao, Chih-Chuan and Ijomah, Winifred L. and Windmill, James F. C. (2018) Incorporating remanufacturing into the end-of-life vehicles directive : current presence and the waste problem. Journal of Remanufacturing, 8 (1-2). pp. 23-37. ISSN 2210-4690

Post, Mark and Michalec, Romain and Bianco, Alessandro and Yan, Xiu-Tian and De Maio, Andrea and Labourey, Quentin and Lacroix, Simon and Gancet, Jeremi and Govindaraj, Shashank and Marinez-Gonazalez, Xavier and Dominguez, Raul and Wehbe, Bilal and Fabich, Alexander and Souvannavong, Fabrice and Bissonnette, Vincent and Smisek, Michal and Oumer, Nassir W. and Triebel, Rudolph and Marton, Zoltan-Csaba (2018) InFuse data fusion methodology for space robotics, awareness and machine learning. In: 69th International Astronautical Congress, 2018-10-01 - 2018-10-05. (In Press)

Paterson, David and Ijomah, Winifred L. and Windmill, James F. C. and Kao, Chih-Chuan and Smillie, Grant (2018) Ultrasonic bulk wave measurements on composite using fiber from recycled CFRP. AIP Conference Proceedings, 1949. ISSN 0094-243X

Parker, Adwoa and Scantlebury, Arabella and Booth, Alison and MacBryde, Jillian Catherine and Scott, William J. and Wright, Kath and McDaid, Catriona (2018) Interagency collaboration models for people with mental ill health in contact with the police : a systematic scoping review. BMJ Open, 8 (3). ISSN 2044-6055

Pérez, Marcos (2018) Microstructural and texture evolution of Jethete M152 flanged-test pieces during cold rotary forging. Journal of Materials Processing Technology, 252. pp. 582-594. ISSN 0924-0136

Pérez, Marcos (2018) Microstructural evolution of Nimonic 80a during hot forging under non-isothermal conditions of screw press. Journal of Materials Processing Technology, 252. pp. 45-57. ISSN 0924-0136

Palazzetti, R. and Zucchelli, A. (2017) Electrospun nanofibers as reinforcement for composite laminates materials – a review. Composite Structures, 182. pp. 711-727. ISSN 0263-8223

Post, Mark A. and Bianco, Alessandro and Yan, Xiu T. (2017) Autonomous navigation with open software platform for field robots. In: Lecture Notes in Electrical Engineering. Springer, Berlin. (In Press)

Presz, Wojciech and Rosochowska, Malgorzata (2017) Application of semi-physical modelling of interface surface roughness in design of pre-stressed microforming dies. Procedia Engineering, 207. pp. 1004-1009. ISSN 1877-7058

Post, Mark and Li, Junquan (2017) Autonomous micro-rovers for future planetary exploration and terrestrial sensing. In: 15th Reinventing Space Conference, 2017-10-24 - 2017-10-26, University of Strathclyde Technology & Innovation Centre.

Pearce, J. V. and Edler, F. and Elliott, C. J. and Rosso, L. and Sutton, G. and Andreu, A. and Machin, G. (2017) EMPRESS : A European project to enhance process control through improved temperature measurement. International Journal of Thermophysics, 38 (8). ISSN 0195-928X

Post, Mark A. and Bianco, Alessandro and Yan, Xiu T. (2017) Autonomous navigation with ROS for a mobile robot in agricultural fields. In: 14th International Conference on Informatics in Control, Automation and Robotics (ICINCO), 2017-07-26 - 2017-07-28, Universidad Rey Juan Carlos.

Post, Mark and Souvannavong, Fabrice and Govinderaj, Shashank and Gancet, Jeremi and Bissonnette, Vincent and Dominguez, Raul and Lacroix, Simon and Smisek, Michal and Hidalgo-Carrio, Javier and Wehbe, Bilal and Fabisch, Alexander and De Maio, Andrea and Oumer, Nassir and Bissonnette, Vincent and Marton, Zoltan-Csaba and Kottath, Sandeep and Nissler, Christian and Yan, Xiu and Triebel, Rudolph and Nuzzolo, Francesco (2017) InFuse : infusing perception and data fusion into space robotics with open building blocks. In: 14th International Conference on Informatics in Control, Automation and Robotics, 2017-07-26 - 2017-07-28.

Pham, Trung Quang and Butler, David Lee and Khun, Nay Win (2017) An investigation of the properties of conventional and severe shot peened low alloy steel. Materials Research Express, 4 (7). ISSN 2053-1591

Pérez, Marcos (2017) Impact of annealing treatments on the softening and work hardening behaviour of Jethete M152 alloy for subsequent cold forming processes. Materials Science and Engineering: A, 690. pp. 303-312. ISSN 0921-5093

Perez, Marcos (2017) Analysis of innovative incremental cold forming process for the manufacturing of aerospace rotating parts. In: Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers(ASME), New York. (In Press)

Paterson, David A.P. and Ijomah, Winifred L. and Windmill, James F.C. (2017) End-of-Life decision tool with emphasis on remanufacturing. Journal of Cleaner Production, 148. pp. 653-664. ISSN 0959-6526

Piccinini, Marco and Humbert, Laurent and Xirouchakis, Paul (2017) 3D microstructural effects in biphasic steel cutting. WSEAS Transactions on Applied and Theoretical Mechanics, 12 (24). pp. 195-220. ISSN 1991-8747

Piticescu, Radu R. and Cuesta-Lopez, Santiago and Rinaldi, Antonio and Urbina, Marina and Qin, Yi and Szakalos, Peter and Largeteau, Alain (2016) SUPERMAT – A virtual center for sustainable development of advanced materials operating under extreme conditions. Physica Status Solidi C, 13 (10-12). pp. 1023-1027. ISSN 1610-1642

Pawlik, Elzbieta and Ijomah, Winifred and Corney, Jonathan (2016) Lean remanufacturing. In: The Routledge Companion to Lean Management. Routledge Companions in Business, Management and Accounting . Routledge, Milton Park, Abingdon, Oxon, pp. 179-188. ISBN 9781138920590

Priyono, Anjar and Ijomah, Winifred and Bititci, Umit S. (2016) Disassembly for remanufacturing : a systematic literature review, new model development and future research needs. Journal of Industrial Engineering and Management, 9 (4). pp. 73-89. ISSN 2013-0953

Payne, Grant and Ahmad, Abdul and Fitzpatrick, Stephen and Xirouchakis, Paul and Ion, William and Wilson, Michael (2016) Remanufacturing H13 steel moulds and dies using laser metal deposition. In: 14th International Conference on Manufacturing Research, 2016-09-06 - 2016-09-08, Loughborough University.

Pidgeon, Laura M. and Grealy, Madeleine and Duffy, Alex H.B. and Hay, Laura and McTeague, Christopher and Vuletic, Tijana and Coyle, Damien and Gilbert, Sam J. (2016) Functional neuroimaging of visual creativity : a systematic review and meta-analysis. Brain and Behavior. ISSN 2162-3279

Palazzetti, Roberto and Yan, Xiu (2016) Study on lubrication effect on motorbike chain transmissions. Industrial Lubrication and Tribology, 68 (5). ISSN 0036-8792

Pollard, J.D. and Rahimi, S. and Watford, A. and Jackson, M. and Wynne, B.P. (2016) The determination of residual stress in extruded Ti-6Al-4V by contour method and finite element analysis. In: Proceedings of the 13th World Conference on Titanium. Wiley, Hoboken, New Jersey, pp. 305-310. ISBN 9781119293668

Post, Mark and Bauer, Ralf and Li, Junquan and Lee, Regina (2016) Study for femto satellites using micro control moment gyroscope. In: 2016 IEEE Aerospace Conference. IEEE, New York, pp. 1-8. ISBN 9781479953806

Paterson, David A. P. and Ijomah, Winifred and Windmill, James F. C. (2016) An analysis of end of life terminology in the carbon fiber reinforced plastic industry. International Journal of Sustainable Engineering, 9 (2). pp. 130-140. ISSN 1939-7038

Post, Mark A. and Li, Junquan and Quine, Brendan M. (2016) Planetary micro-rover operations on Mars using a Bayesian framework for inference and control. Acta Astronautica, 120. pp. 295-314. ISSN 0094-5765

Pattison, D. and Segovia Garcia, M. and Xie, W. and Quail, F. and Revie, M. and Whitfield, I. and Irvine, I. (2016) Intelligent integrated maintenance for wind power generation. Wind Energy. ISSN 1095-4244

Priyono, Anjar and Ijomah, Winifred and Bititci, Umit S. (2015) Strategic operations framework for disassembly in remanufacturing. Journal of Remanufacturing, 5. ISSN 2210-4690

Palazzetti, R (2015) Flexural behavior of carbon and glass fiber composite laminates reinforced with Nylon 6,6 electrospun nanofibers. Journal of Composite Materials, 49 (27). pp. 3407-3413. ISSN 0021-9983

Post, Mark A. and Palazzetti, Roberto and Yan, Xiu T. (2015) AGRIBOT : enabling agricultural robotics with space hardware technology. In: 2015 Space Robotics Symposium – Present and Future Robotics in Space Applications. UNSPECIFIED.

Pereira, Guilherme Salatine and de Sousa Jabbour, Ana Beatriz Lopes (2015) Interface entre as áreas de operações e meio ambiente : estudo de casos sobre os pontos de contato e seus potenciais conflitos. Gestão & Produção, 22 (4). pp. 711-724.

Post, Mark (2015) An embedded implementation of Bayesian network robot programming methods. In: IMA Conference on Mathematics of Robotics, 2015-09-09 - 2015-09-11, University of Oxford, St Anne's College.

Paterson, David and Ijomah, Winifred and Windmill, James (2015) Carbon fibre reinforced plastic EOL : protecting remanufacturing status and life cycle route analysis. In: International Conference on Remanufacturing (ICoR 2015), 2015-06-14 - 2015-06-16, RAI Amsterdam.

Post, Mark A. and Yan, Xiu T. (2015) Visual pose estimation and identification for satellite rendezvous operations. In: Sixth China-Scotland SIPRA workshop "Recent Advances in Signal and Image Processing", 2015-05-31 - 2015-05-31, University of Stirling.

Post, Mark A. and Yan, Xiu T. and Li, Junquan and Clark, Craig (2015) Visual pose estimation system for autonomous rendezvous of spacecraft. In: 13th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA 2015), 2015-05-11 - 2015-05-13.

Post, Mark A. and Yan, Xiu T. (2014) Target shape identification for nanosatellites using monocular point cloud techniques. In: 6th European CubeSat Symposium, 2014-10-14 - 2014-10-16.

Post, Mark and Quine, Brendan (2014) Planetary micro-rover operations on mars using a bayesian framework for inference and control. In: 65th International Astronautical Congress (IAC 2014), 2014-09-29 - 2014-10-03, Metro Toronto Convention Centre.

Palazzetti, R. and Garcia, D. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2014) An investigation in vibration modeling and vibration-based monitoring for composite laminates. In: Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics. KU Leuven, pp. 3819-3828. ISBN 9789073802919

Palazzetti, Roberto and Yan, Xiu and Zucchelli, Andrea (2014) Influence of geometrical features of electrospun nylon 6,6 interleave on the CFRP laminates mechanical properties. Polymer Composites, 35 (1). pp. 137-150. ISSN 0272-8397

Palazzetti, Roberto and Zucchelli, Andrea (2014) Electrospun nanofibrous interleaves in composite laminate materials. PhD thesis, UNSPECIFIED.

Post, Mark Andrew and Li, Junquan and Lee, Regina (2014) Design and construction of a magnetic field simulator for cubesat attitude control testing. Journal of Instrumentation, Automation and Systems, 1 (1). pp. 1-9. ISSN 2288-582X

Palazzetti, Roberto and Zucchelli, Andrea and Trendafilova, Irina (2013) The self-reinforcing effect of nylon 6,6 nano-fibres on CFRP laminates subjected to low velocity impact. Composite Structures, 106. pp. 661-671. ISSN 0263-8223

Post, Mark and Li, Junquan and Lee, Regina (2013) A low cost photodiode sun sensor for CubeSat and planetary micro-rover. International Journal of Aerospace Engineering, 2013. ISSN 1687-5966

Pawlik, Elzbieta and Powell, Daryl and Ijomah, Winifred and Corney, Jonathan (2013) Addressing challenges of the remanufacturing process with the application of lean practices. In: EurOMA 2013 Conference, 2013-06-07 - 2013-06-12, University College & Trinity College Dublin (UCD)..

Priyono, Anjar and Bititci, Umit S. and Ijomah, Winifred L. (2013) Human resource strategy in disassembly for remanufacturing. In: The 20th EurOMA conference, 2013-06-09 - 2013-06-12, Trinity College Dublin (TCD) and University College Dublin (UCD)..

Pawlik, Elzbieta and Ijomah, Winifred and Corney, Jonathan (2013) Current state and future perspective research on lean remanufacturing - focusing on the automotive industry. IFIP Advances in Information and Communication Technology, 397 (Part 1). pp. 429-436. ISSN 1868-4238

Polyakova, Veronika and Gabitova, Svetlana and Semenova, Irina and Yakushina, Evgenia and Rosochowski, Andrzej (2012) Study of ultrafine grained Ti-6Al-4V linear friction welds. In: 2nd International Conference on Recent Trends in Structural Materials, COMAT 2012, 2012-11-21 - 2012-11-22.

Post, Mark and Li, Junquan and Lee, Regina (2012) Nanosatellite air bearing tests of fault-tolerant sliding-mode attitude control with unscented kalman filter. In: AIAA Guidance, Navigation, and Control Conference, 2012-08-13 - 2012-08-16, Hyatt Regency.

Post, Mark and Quine, Brendan and Lee, Regina (2012) Bayesian decision making for planetary micro-rovers. In: Infotech@Aerospace 2012, 2012-06-19 - 2012-06-21, Hyatt Regency Orange County.

Post, Mark and Quine, Brendan and Lee, Regina (2012) Beaver micro-rover development for the northern light mars lander. In: CASI ASTRO 2012, 2012-04-24 - 2012-06-24, Fairmont Château Frontenac Hotel.

Palazzetti, R. and Zucchelli, A. and Gualandi, C. and Focarete, M. L. and Donati, L. and Minak, G. and Ramakrishna, S. (2012) Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates. Composite Structures, 94 (2). pp. 571-579. ISSN 0263-8223

Pen, Hongmin and Liang, Yingchun and Luo, Xichun and Bai, Qingshun and goel, Saurav and Ritchie, James (2011) Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation. Computational Materials Science, 50 (12). pp. 3431-3441. ISSN 0927-0256

Post, Mark and Lee, Regina and Quine, Brendan (2011) Modular design for space engineering research platforms. In: 8th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2011), 2011-07-28 - 2011-07-31.

Perumal, B and Rist, M and Gungor, S and Brooks, Jeffery (2011) Morphological and textural evolution of the alpha phase during hot deformation of two-phase Ti-6Al-4V. In: 12th World Conference on Titanium, 2011-06-19 - 2011-06-24.

Post, Mark and Lee, Regina (2011) Lessons learned from the York University Rover Team (YURT) at the University Rover Challenge 2008–2009. Acta Astronautica, 68 (7-8). 1343–1352. ISSN 0094-5765

Pan, Wenke and Wheel, Marcus and Qin, Yi (2010) Six-node triangle finite volume method for solids with a rotational degree of freedom for incompressible material. Computers and Structures, 88 (23-24). pp. 1506-1511. ISSN 0045-7949

Post, Mark and Zhu, Zheng Hong and Clarkson, Geoff (2010) Characterization of fibre orientation in FRP using pitch-catch ultrasonic technique. International Journal of Multiscale Materials Modeling, 1 (1). pp. 53-61.

Parkhill, Ross and Belton, Valerie and Bititci, Umit and Roberts, Alastair and Smith, M. (2010) Using multiple criteria decision analysis to aid the selection of enterprise resource planning software : a case study. In: Innovation through knowledge transfer. Smart Innovation Systems and Technologies . Springer-Verlag Berlin, Berlin, pp. 39-49. ISBN 9783642145933

Post, Mark and Lee, Regina (2009) Lessons learned from the York University Rover Team (YURT) at the university rover competition 2008. In: 60th International Astronautical Congress 2009 (IAC 2009). International Astronautical Federation (IAF), pp. 8567-8577. ISBN 9781615679089

Pham, D.T. and Elkaseer, A.M. and Popov, K.P. and Dimov, S.S. and Olejnik, L. and Rosochowski, A. (2009) Micromiling of coarse-grained and ultrafine-grained Cu99.9E: Effects of material microstructure on machining conditions and surface quality. In: Proceedings of the International Conferences on Multi-Material Micro Manufacture (4M)/International Conferences on Micro Manufacturing (ICOMM). Professional Engineering Publishing, pp. 241-244.

Prats, Miquel and Lim, Sungwoo and Jowers, Iestyn and Garner, Steve W. and Chase, Scott, AHRC (Funder), EPSRC (Funder) (2009) Transforming shape in design : observations from studies of sketching. Design Studies, 30 (5). pp. 503-520. ISSN 0142-694X

Post, Mark and Zhu, Zheng Hong (2009) Non-destructive measurement of stress using ultrasonic leaky lamb waves. In: 22nd Canadian Congress of Applied Mechanics 2009, 2009-05-31 - 2009-06-04.

Post, Mark and Zhu, Zheng Hong and Clarkson, Geoff (2009) Ultrasonic amplitude fitting of fibre orientation in fibre-reinforced polymers. In: 22nd Canadian Congress of Applied Mechanics 2009, 2009-05-31 - 2009-06-04.

Pan, W. and Qin, Yi and Law, F. and Ma, Y. and Brockett, A. and Juster, N.P. (2008) Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming. International Journal of Advanced Manufacturing Technology, 38 (3-4). pp. 393-401. ISSN 0268-3768

Pan, W. and Qin, Y. (2008) FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models. Journal of Materials Processing Technology, 201 (1-3). pp. 220-225. ISSN 0924-0136

Pan, Wenke and Wheel, Marcus and Qin, Yi (2008) A six-node triangle finite volume method for solids with a rotational degree of freedom for incompressible material. In: 16th. UK Conference on Computational Mechanics (ACME-UK), 2008-04-01.

Parung, Joniarto and Bititci, Umit S. (2008) A metric for collaborative networks. Business Process Management Journal, 14 (5). pp. 654-674. ISSN 1463-7154

Pan, Wenke and Qin, Yi (2007) FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models. In: 10th International Conference on Advances in Materials and Processing Technologies - AMPT 2007. Elsevier, pp. 539-545.

Peng, X. and Qin, Y. and Balendra, R. (2007) A numerical investigation to the strategies of the localised heating for micro-part stamping. International Journal of Mechanical Sciences, 49 (3). pp. 379-391. ISSN 0020-7403

Parra, Jorge O. and Xu, Pei-Cheng and Post, Mark (2006) Experimental ultrasonic microseismograms using scaled realistic earth and borehole models. In: SEG Technical Program Expanded Abstracts 2006. Society of Exploration Geophysicists, Tulsa.

Pan, Wenke and Qin, Yi and Law, Fraser and Ma, Yanling and Brockett, Andrew and Juster, Neal (2006) A feasibility study of using rings of shape memory alloy for forming-error compensation in micro-forming. In: 4th Int. Conf. on Manufacturing Research, 2006-09-11.

Peng, X. and Zhou, J. and Qin, Y. (2005) Improvement of the temperature distribution in continuous casting moulds through the rearrangement of the cooling water slots. Journal of Materials Processing Technology, 167 (2-3). pp. 508-514. ISSN 0924-0136

Peng, Xianghe and Qin, Y and Zhang, X. (2005) A constitutive model for the metals subjected to thermomechanical loading with fast heating during heating-assisted forming. Journal of Materials Processing Technology, 167 (2-3). pp. 244-250. ISSN 0924-0136

Peng, X. and Qin, Y. and Balendra, R. (2004) Analysis of the laser-heating methods for micro-parts stamping applications. Journal of Materials Processing Technology, 150 (1-2). pp. 84-91. ISSN 0924-0136

Papadakis, N. and Wood, Paul (2004) Effect of loading rate, volume fraction, trigger type and thickness on the edgewise compression loading of thermoplastic composite plates. In: 11th European Conference on Composite Materials: From Nano-scale Interactions to Engineering Structures, 2004-05-31 - 2004-06-03.

Papadakis, N. and Reynolds, N. and Pharaoh, M. and Wood, Paul and Smith, G.F. (2004) Strain rate effects on the shear properties of a highly orientated thermoplastic composite material using a contacting displacement measurement methodology– Part A : Elasticity and strength.