Picture of blood cells

Open Access research which pushes advances in bionanotechnology

Strathprints makes available scholarly Open Access content by researchers in the Strathclyde Institute of Pharmacy & Biomedical Sciences (SIPBS) , based within the Faculty of Science.

SIPBS is a major research centre in Scotland focusing on 'new medicines', 'better medicines' and 'better use of medicines'. This includes the exploration of nanoparticles and nanomedicines within the wider research agenda of bionanotechnology, in which the tools of nanotechnology are applied to solve biological problems. At SIPBS multidisciplinary approaches are also pursued to improve bioscience understanding of novel therapeutic targets with the aim of developing therapeutic interventions and the investigation, development and manufacture of drug substances and products.

Explore the Open Access research of SIPBS. Or explore all of Strathclyde's Open Access research...

Browse by Author or Creator

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Jump to: 2018 | 2017 | 2013 | 2012 | 2011 | 2009 | 2008 | 2007 | 2006 | 2003 | 2001 | 1998
Number of items: 23.

2018

Clintworth, Mark and Boulougouris, Evangelos and Lee, Byung Suk (2018) Correction to : Combining multicriteria decision analysis and cost–benefit analysis in the assessment of maritime projects financed by the European Investment Bank. Maritime Economics and Logistics. ISSN 1479-294X

Jeong, Byongug and Lee, Byung Suk and Zhou, Peilin and Ha, Seung-man (2018) Determination of safety exclusion zone for LNG bunkering at fuel-supplying point. Ocean Engineering, 152. pp. 113-129. ISSN 0029-8018

Clintworth, Mark and Boulougouris, Evangelos and Lee, Byung Suk (2018) Combining multicriteria decision analysis and cost-benefit analysis in the assessment of maritime projects financed by the European Investment Bank. Maritime Economics & Logistics, 20 (1). pp. 29-47. ISSN 1479-294X

Park, Sayyoon and Jeong, Byongug and Lee, Byung Suk and Oterkus, Selda and Zhou, Peilin (2018) Potential risk of vapour cloud explosion in FLNG liquefaction modules. Ocean Engineering, 149. pp. 423-437. ISSN 0029-8018

2017

Jeong, Byongug and Lee, Byung Suk and Zhou, Peilin and Ha, Seung-man (2017) Quantitative risk assessment of medium-sized floating regasification units using system hierarchical modelling. Ocean Engineering. pp. 1-19. ISSN 0029-8018

Kang, Ju Young and Lee, Byung Suk (2017) Optimisation of pipeline route in the presence of obstacles based on a least cost path algorithm and laplacian smoothing. International Journal of Naval Architecture and Ocean Engineering, 9 (5). pp. 492-498. ISSN 2092-6790

Jeong, Byongug and Lee, Byung Suk and Zhou, Peilin (2017) Quantitative risk assessment of fuel preparation room having high-pressure fuel gas supply system for LNG fuelled ship. Ocean Engineering, 137. pp. 450-468. ISSN 0029-8018

Jeong, Byongug and Lee, Byung Suk and Zhou, Peilin (2017) Evaluation of safety exclusion zone for LNG bunkering station on LNG-fuelled ships. Marine Engineering and Technology. pp. 1-24. ISSN 2056-8487

2013

Papanikolaou, Apostolos and Hamann, Rainer and Lee, Byung Suk and Mains, Christian and Olufsen, Odd and Vassalos, Dracos and Zaraphonitis, George (2013) GOALDS - goal based damage ship stability and safety standards. Accident Analysis and Prevention, 60. pp. 353-365. ISSN 0001-4575

2012

Papanikolaou, Apostolos and Lee, Byung Suk and Mains, Christian and Olufsen, Odd and Vassalos, Dracos and Zaraphonitis, George (2012) GOALDS – goal based ship stability & safety standards. Procedia Social and Behavioral Sciences, 48. pp. 449-463. ISSN 1877-0428

2011

Xue, Y. Z. and Clelland, D. and Lee, B. S. and Han, D. F. (2011) Automatic simulation of ship navigation. Ocean Engineering, 38 (17-18). pp. 2290-2305. ISSN 0029-8018

2009

Kang, Ju Young and Lee, B.S. (2009) Mesh-based morphing method for rapid hull form generation. Computer-Aided Design, 42 (11). 970–976. ISSN 0010-4485

2008

Xue, Y. and Lee, B.S. and Han, D. (2008) Automatic collision avoidance of ships. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 223 (1). pp. 33-46. ISSN 1475-0902

2007

Vassalos, D. and Xie, N. and Jasionowski, A. and Lee, B.S. (2007) Dynamic stability of air lifted catamaran. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 221 (4). pp. 137-146.

Xie, J.X. Nan and Vassalos, D. and Lee, B.S. (2007) Prediction of roll hydrodynamics of cylinders fitted with bilge keels with RANS. Journal of Ship Mechanics, 11 (6).

2006

Bole, M. and Lee, B.S. (2006) Integrating parametric hull generation into early stage design. Ship Technology Research, 53. pp. 115-137. ISSN 0937-7255

2003

Bole, M. and Lee, B.S. (2003) An hierarchical approach to hull form design. In: NAV 2003, 2003-06-24 - 2003-06-27.

Lim, S.W. and Duffy, A.H.B. and Lee, B.S. (2003) Active pendulation controlled davits. In: UNSPECIFIED. (Unpublished)

Vassalos, D. and Lee, B.S. and Sayer, P.G. (2003) A rational method of project selection by post-graduate students. International Journal of Engineering Education, 19 (6). pp. 847-854. ISSN 0949-149X

2001

Lim, S.W. and Lee, B.S. and Duffy, A.H.B. (2001) Incremental modelling of ambiguous geometric ideas (I-MAGI): represenation and maintenance of vague geometry. Artificial Intelligence in Engineering, 15 (2). pp. 93-108. ISSN 0954-1810

Lim, Sungwoo and Duffy, Alex H.B. and Lee, Byungsuk (2001) Intelligent computational sketching support for conceptual design. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

Lim, Sungwoo and Duffy, Alex H.B. and Lee, Byungsuk (2001) Shape matching and clustering. In: 13th International Conference on Engineering Design (ICED 01), 2001-08-21 - 2001-08-23.

1998

Manfaat, D. and Duffy, A.H.D. and Lee, B.S. (1998) SPIDA: Abstracting and generalizing layout design cases. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 12 (2). pp. 141-159. ISSN 0890-0604

This list was generated on Mon Jul 22 19:34:08 2019 BST.