Picture of wind farm

Open Access research that is tackling the climate emergency...

Addressing the energy challenge confronting society is a strategic research theme for Strathclyde. Researchers from across the institution, spanning multiple disciplines, are therefore working together to understand ways of reducing the environmental impacts of energy use, improving energy efficiency, coping with declining fossil fuel supplies, managing an ageing energy infrastructure, and devising policy or economic levers to achieve higher penetration of renewable energy systems and technologies. Strathprints makes this scholarly research content available Open Access thereby ensuring results are available to everyone in order meet the global climate challenge.

Explore some of this Open Access research from the departments of Mechanical & Aerospace Engineering, Electronic & Electrical Engineering, Civil & Environmental Engineering, Naval Architecture, Ocean & Marine Engineering, Economics, Entrepreneurship and the School of Government & Public Policy.

Or explore all of Strathclyde's Open Access research...

Items where department is "National Manufacturing Institute Scotland"

Group by: No Grouping | Publication Date | Authors | Item type
Number of items at this level: 157.

Banerjee, Amborish and Wylie, Andrew and Da Silva, Laurie (2023) Near-net shape manufacture of ultra-high strength maraging steel using flow forming and inertia friction welding : experimental and microstructural characterisation. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 145 (2). MANU-22-1115. ISSN 1528-8935

Singh, Ajit Pal and Torrens, Rob and Gabbitas, Brian and Sivaswamy, Giribaskar (2023) Effect of heat treatments on microstructure and mechanical properties of low-cost Ti-6Al-4V alloy produced by thermo-mechanical powder consolidation route. Metals, 13 (1). 173. ISSN 2075-4701

Rane, Kedarnath and Date, Prashant and Srivatsan, T. S. (2023) Influence of material and process parameters on reduction-swelling characteristics of sintered iron pellets. Metals, 13. 141. ISSN 2075-4701

Cochrane, A.D. and Serra, J. and Lander, J.K. and Böhm, H. and Wollmann, T. and Hornig, A. and Gude, M. and Partridge, I.K. and Hallett, S.R. (2022) Experimental investigation of high strain-rate, large-scale crack bridging behaviour of z-pin reinforced tapered laminates. Composites Part A: Applied Science and Manufacturing, 155. 106825. ISSN 1359-835X

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2022) Additive manufacturing process design for complex aircraft components. The International Journal of Advanced Manufacturing Technology, 123 (11-12). pp. 4195-4211. ISSN 1433-3015

Arshed, Farhan and Ahmad, Abdul and Xirouchakis, Paul and Metsios, Ioannis (2022) Laser cutting of carbon fiber reinforced plastic components for remanufacturing. Journal of Remanufacturing, 12 (3). pp. 411-433. ISSN 2210-4690

Coyne-Grell, A. and Blaizot, J. and Rahimi, S. and Violatos, I. and Nouveau, S. and Dumont, C. and Nicolaÿ, A. and Bozzolo, N. (2022) Evolution of γ′ precipitation during the early stages of industrial forging of a nickel-based superalloy. Metallurgical and Materials Transactions A. ISSN 1073-5623

Miscandlon, Jill and Kazemi-Amiri, Abbas and Forrest, Stephen J. and Chen, Xiao and Harper, Daniel and McDonald, Alasdair and Jewell, Geraint Wyn (2022) A manufacturing driven design methodology to lightweighting of the structural elements of a permanent magnet electrical machine rotor. IEEE Access, 10. pp. 117449-117468. ISSN 2169-3536

Souza, Paul M. and Sivaswamy, Giribaskar and Bradley, Luke and Barrow, Andrew and Rahimi, Salah (2022) An innovative constitutive material model for predicting high temperature flow behaviour of inconel 625 alloy. Journal of Materials Science, 57 (44). pp. 20794-20814. ISSN 0022-2461

Loeliger, Andrew and Yang, Erfu and Bomphray, Iain (2022) A smart sensor box to increase the adaptability of automated manufacturing. Advances in Transdisciplinary Engineering, 25. pp. 31-36. ISSN 2352-7528

Sanjari, Mehdi and Mahmoudiniya, Mahdi and Pirgazi, Hadi and Tamimi, Saeed and Ghoncheh, Mohammad Hossein and Shahriairi, Ayda and Hadadzadeh, Amir and Amirkhiz, Babak Shalchi and Purdy, Mackenzie and de Araujo, Edgar Gomes and Kestens, Leo and Mohammadi, Mohsen (2022) Microstructure, texture, and anisotropic mechanical behavior of selective laser melted maraging stainless steels. Materials Characterization, 192. 112185. ISSN 1044-5803

Aburaed, Nour and Alkhatib, Mohammed Q. and Marshall, Stephen and Zabalza, Jaime and Al Ahmad, Hussain; (2022) A comparative study of loss functions for hyperspectral SISR. In: 30th European Signal Processing Conference, EUSIPCO 2022 - Proceedings. European Signal Processing Conference . European Signal Processing Conference, EUSIPCO, SRB, pp. 484-487. ISBN 9789082797091

Lu, Qiong and Zhang, Chi and Wang, Wei and Jiang, Shuai and Aucott, Lee and Yasmeen, Tabassam and Jiang, Jun (2022) Reveal the viscoplastic behaviour and microstructure evolution of stainless steel 316L. Materials, 15 (20). 7064. ISSN 1996-1944

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2022) Examining the inherent strains of aluminium alloy 7050-T7451 powder for additive manufacturing processes. MRS Communications, 12 (5). pp. 813-818.

Coyne-Grell, A. and Blaizot, J. and Rahimi, S. and Violatos, I. and Nouveau, S. and Dumont, C. and Nicolaÿ, A. and Bozzolo, N. (2022) Recrystallization mechanisms and associated microstructure evolution during billet conversion of a gamma-gamma' nickel based superalloy. Journal of Alloys and Compounds, 916. 165465. ISSN 0925-8388

Michie, C. and Andonovic, I. and Tachtatzis, C. and Davison, C. and Hamilton, A.; Banhazi, Thomas and Molina, Francisco Maroto and Halas, Veronika, eds. (2022) Chapter 3: Herdsman+: artificial intelligence enabled systems and services for livestock farming : Herdsman+ artificial intelligence enabled systems and services for livestock farming. In: Practical Precision Livestock Farming (PLF). Practical Precision Livestock Farming . Wageningen Academic Publishers, Wageningen, The Netherlands, pp. 53-70. ISBN 9789086869343

Mohseni, E. and Pierce, S. G. and Vithanage, R. and Dobie, G. and MacLeod, C. N. and McKnight, S. and Foster, E. and Loukas, C. and McInnes, M. and Gover, H. and Burnham, K. and O'Brien-O'Reilly, J. and Paton, S. and Munro, G. and O'Hare, T. and Grosser, M. (2022) Multi-sensor electromagnetic inspection feasibility for aerospace composites surface defects. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Mohseni, Ehsan and Zimermann, Rastislav and Vithanage, Randika K. W. and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and MacDonald, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Gachagan, A. and Williams, Stewart and Ding, Jialuo (2022) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Huang, Ruoyu (2022) Growth spin in plant cell wall growth and remodelling. Mathematics and Mechanics of Solids. pp. 1-44. ISSN 1081-2865

Nayak, Kanhu C. and Rane, Kedarnath K. and Date, Prashant P. and Srivatsan, T. S. (2022) Synthesis of an aluminum alloy metal matrix composite using powder metallurgy : role of sintering parameters. Applied Sciences, 12 (17). 8843. ISSN 2076-3417

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and Rahimi, Salah (2022) Microstructure and mechanical properties of dissimilar inertia friction welded 316L stainless steel to A516 ferritic steel for potential applications in nuclear reactors. Manufacturing Letters, 33. pp. 33-37. ISSN 2213-8463

Hasani, N. and Ghoncheh, M.H. and Kindermann, R.M. and Pirgazi, H. and Sanjari, M. and Tamimi, S. and Shakerin, S. and Kestens, L.A.I. and Roy, M.J. and Mohammadi, M. (2022) Dislocations mobility in superalloy-steel hybrid components produced using wire arc additive manufacturing. Materials and Design, 220. 110899. ISSN 0261-3069

McPhillimy, Michael and Yakushina, Evgenia and Blackwell, Paul (2022) Tailoring titanium sheet metal using laser metal deposition to improve room temperature single-point incremental forming. Materials, 15 (17). 5985. ISSN 1996-1944

Farooqui, Tareq Ahmed and Belwanshi, Vinod and Rane, Kedarnath and Bhole, Kiran Suresh and Oak, Sachin (2022) Numerical analysis of joule heating in a Ni–Ti segmented wire used in sensing applications. Journal of The Institution of Engineers (India): Series D.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and Macleod, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2022) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and O'Neill, Ryan and Rahimi, Salaheddin (2022) Continuous drive friction welding of AISI 8630 low-alloy steel : experimental investigations on microstructure evolution and mechanical properties. Journal of Manufacturing Science and Engineering, 144 (7). 071001. ISSN 1528-8935

Leonidas, Emilios and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fitzpatrick, Stephen and Willmott, Jon R. (2022) A comparative review of thermocouple and infrared radiation temperature measurement methods during the machining of metals. Sensors, 22 (13). 4693. ISSN 1424-8220

Rahimi, Salah and Violatos, Ioannis and Wynne, Bradley and Jackson, Martin (2022) Digital twins for high-value components. Materials World, 30 (6). pp. 38-41. ISSN 0967-8638

Yasmeen, Tabassam and Rahimi, Salah and Hopper, Christopher and Zhang, Chi and Jiang, Jun (2022) Unravelling thermal-mechanical effects on microstructure evolution under superplastic forming conditions in a near alpha titanium alloy. Journal of Materials Research and Technology, 18. pp. 4285-4302. ISSN 2238-7854

Vasantha, Gokula and Purves, David and Corney, Jonathan and Canavan, Michael and Quigley, John and Sherlock, Andrew (2022) Towards predictive design : tracking a CNC fixture design process to identify the requirements. In: 19th International Conference in Manufacturing Research ICMR 2022, 2022-09-06 - 2022-09-08. (In Press)

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and MacLeod, Charles N. and Lines, David and Javadi, Yashar and Espirindio E Silva, Misael Pimentel and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2022) Collaborative robotic Wire + Arc Additive Manufacture and sensor-enabled in-process ultrasonic Non-Destructive Evaluation. Sensors, 22 (11). 4203. ISSN 1424-8220

Annamalai Vasantha, Gokula Vijayumar and Purves, David and Quigley, John and Corney, Jonathan and Sherlock, Andrew and Randika, Geevin (2022) Assessment of predictive probability models for effective mechanical design feature reuse. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 36. e17. ISSN 0890-0604

Ramlakhan, Shammi and Saatchi, Reza and Sabir, Lisa and Singh, Yardesh and Hughes, Ruby and Shobayo, Olamilekan and Ventour, Dale (2022) Understanding and interpreting artificial intelligence, machine learning and deep learning in emergency medicine. Emergency Medicine Journal, 39 (5). pp. 380-385. ISSN 1472-0213

Ramlakhan, Shammi L and Saatchi, Reza and Sabir, Lisa and Ventour, Dale and Shobayo, Olamilekan and Hughes, Ruby and Singh, Yardesh (2022) Building artificial intelligence and machine learning models : a primer for emergency physicians. Emergency Medicine Journal, 39 (5). e1. ISSN 1472-0213

Cochrane, A.D. and Serra, J. and Lander, J.K. and Partridge, I.K. and Böhm, H. and Wollmann, T. and Hornig, A. and Gude, M. and Hallett, S.R. (2022) Experimental investigation of large-scale high-velocity soft-body impact on composite laminates. International Journal of Impact Engineering, 161. 104089. ISSN 0734-743X

Narasimharaju, Shubhavardhan Ramadurga and Zeng, Wenhan and See, Tian Long and Zhu, Zicheng and Scott, Paul and Jiang (Jane), Xiangqian and Lou, Shan (2022) A comprehensive review on laser powder bed fusion of steels : processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends. Journal of Manufacturing Processes, 75. pp. 375-414. ISSN 1526-6125

Sutton, Gavin and Korniliou, Sofia and Andreu, Aurik and Wilson, David (2022) Imaging luminescence thermometry to 750 °C for the heat treatment of common engineering alloys and comparison with thermal imaging. International Journal of Thermophysics, 43 (3). 36. ISSN 0195-928X

Javadi, Yashar and Hutchison, Alistair and Singh, Jonathan and Mohseni, Ehsan and Rahimi, Salah and Mehnen, Jorn and MacLeod, Charles Norman and Pierce, Gareth and Tant, Katherine Margaret Mary and Gachagan, Anthony (2022) Feasibility study of residual stress measurement using phased ‎array ultrasonic method. In: 11th International Conference on Residual Stress, 2022-03-27 - 2022-03-30, Centre Prouve.

Rasheed, Aamir and Ion, William (2022) A novel approach towards sustainability assessment in manufacturing and stakeholder's role. Sustainability, 14 (6). 3221. ISSN 2071-1050

Mishra, Ases Akas and Momin, Affaf and Strano, Matteo and Rane, Kedarnath (2022) Implementation of viscosity and density models for improved numerical analysis of melt flow dynamics in the nozzle during extrusion-based additive manufacturing. Progress in Additive Manufacturing, 7 (1). pp. 41-54. ISSN 2363-9520

Quigley, John and Vasantha, Gokula and Corney, Jonathan and Purves, David and Sherlock, Andrew (2022) Design as a marked point process. Journal of Mechanical Design, 144 (2). 021713. ISSN 1050-0472

Tamimi, Saeed and He, Youliang and Sanjari, Mehdi and Pirgazi, Hadi and Kockelmann, Winfried and Robinson, Fiona and Mohammadi, Mohsen and Kestens, Leo (2022) Mechanical properties and crystallographic texture of non-oriented electrical steel processed by repetitive bending under tension. Materials Science and Engineering: A, 835. 142665. ISSN 0921-5093

Souza, Paul M. and Sivaswamy, Giribaskar and Hall, Elizabeth and Rahimi, Salaheddin (2022) An analysis of the forgeability of Ti-10V-2Fe-3Al β titanium alloy using a combined Estrin Mecking and Avrami material constitutive model. International Journal of Mechanical Sciences, 216. 106975. ISSN 0020-7403

Oturu, Kingsley and Ijomah, Winifred and Orr, Andrew and Verpeaux, Laura and Broadfoot, Ben and Clark, Stuart and Devine, Ryan (2022) Remanufacturing of single-use medical devices : a case study on cross-border collaboration between the UK and Nigeria. Health and Technology, 12 (2). pp. 273-283. ISSN 2190-7188

Saidi, Peyman and Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Mohammadi, Mohsen and Béland, Laurent K. and Daymond, Mark R. and Tamblyn, Isaac (2022) Deep learning and crystal plasticity : a preconditioning approach for accurate orientation evolution prediction. Computer Methods in Applied Mechanics and Engineering, 389. 114392. ISSN 0045-7825

Lalvani, Himanshu and Mandal, Paranjayee and Yaghi, Anas and Santos, Pedro and Baufeld, Bernd (2022) A solid-state joining approach to manufacture of transition joints for high integrity applications. Journal of Manufacturing Processes, 73. pp. 90-111. ISSN 1526-6125

Wodehouse, Andrew and Marini, Daniele and Yakushina, Evgenia and Parker, Matthew (2022) Three pass incremental sheet forming : a new strategy for the manufacture of brass musical instruments. Journal of Manufacturing Processes, 73. pp. 483-495. ISSN 1526-6125

Campbell, A. and Murray, P. and Yakushina, E. and Borocco, A. and Dokladal, P. and Decencière, P. and Ion, W. and Marshall, S. (2022) Automated analysis of platelet microstructures using a feature length orientation space. Journal of Materials Science, 57 (2). pp. 1448-1461. ISSN 0022-2461

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and Rahimi, Salah and Wynne, Bradley (2021) Inter-relationship between microstructure evolution and mechanical properties in inertia friction welded 8630 low-alloy steel. Archives of Civil and Mechanical Engineering, 21 (4). 149. ISSN 1644-9665

Strano, Matteo and Rane, Kedarnath and Farid, Muhammad Asad and Mussi, Valerio and Zaragoza, Veronica and Monno, Michele (2021) Extrusion-based additive manufacturing of forming and molding tools. International Journal of Advanced Manufacturing Technology, 117 (7-8). pp. 2059-2071. ISSN 1433-3015

Aburaed, Nour and Alkhatib, Mohammed Q. and Marshall, Stephen and Zabalza, Jaime and Al Ahmad, Hussain; (2021) 3D expansion of SRCNN for spatial enhancement of hyperspectral remote sensing images. In: 2021 4th International Conference on Signal Processing and Information Security, ICSPIS 2021. 2021 4th International Conference on Signal Processing and Information Security, ICSPIS 2021 . Institute of Electrical and Electronics Engineers Inc., ARE, pp. 9-12. ISBN 9781665437967

Dogea, Ramona and Yan, Xiu T and Millar, Richard (2021) A smart wing rib structure suitable for design for additive manufacturing (DfAM) process. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-21.

Souza, Paul M. and Sivaswamy, Giribaskar and Andreu, Aurik and Rahimi, Salaheddin (2021) A novel cyclic thermal treatment for enhanced globularisation kinetics in Ti-6Al-4V alloy : experimental, constitutive and FE based analyses. Journal of Alloys and Compounds. 162859. ISSN 0925-8388

Yang, Manman and Yu, Leijian and Wong, Cuebong and Mineo, Carmelo and Yang, Erfu and Bomphray, Iain and Huang, Ruoyu (2021) A cooperative mobile robot and manipulator system (Co-MRMS) for transport and lay-up of fibre plies in modern composite material manufacture. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015

Kulakov, Mykola and Rahimi, Salah and Semiatin, S. Lee (2021) Effect of deformation heating on microstructure evolution during hot forging of Ti-6Al-4V. Metallurgical and Materials Transactions A, 53 (2). pp. 407-419. ISSN 1073-5623

Loeliger, Andrew and Yang, Erfu and Bomphray, Iain; (2021) An overview of automated manufacturing for composite materials. In: 2021 26th International Conference on Automation and Computing (ICAC). IEEE, GBR, pp. 1-6. ISBN 9781860435577

Strazzullo, Gennaro and Ion, William J. and MacBryde, Jillian (2021) An investigation of the translational asset : a proposed classification. The Journal of the Knowledge Economy, 13 (4). pp. 3123-3149. ISSN 1868-7873

Mandal, Paranjayee (2021) Influence of carbon : metal ratio on tribological behaviour of Mo-W-C coating. Applied Sciences, 11 (21). 10189. ISSN 2076-3417

Ferguson, M. and Konkova, T. and Violatos, I. (2021) Microstructural evolution of an interface region in a nickel-based superalloy joint produced by direct energy deposition. Proceedings of the International Conference on Welding and Additive Manufacturing, 15. pp. 47-54. ISSN 1307-6892

Rahimi, S. and Violatos, I. (2021) Comparison between surface and near-surface residual stress measurement techniques using a standard four-point-bend specimen. Experimental Mechanics, 62 (2). pp. 223-236. ISSN 0014-4851

Ward, Robert and Soulatiantork, Payam and Finneran, Shaun and Hughes, Ruby and Tiwari, Ashutosh (2021) Real-time vision-based multiple object tracking of a production process : industrial digital twin case study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235 (11). pp. 1861-1872. ISSN 2041-2975

Yang, Manman and Yu, Leijian and Wong, Cuebong and Mineo, Carmelo and Yang, Erfu and Bomphray, Iain and Huang, Ruoyu and Brady, Scott; Shafik, Mahmoud and Case, Keith, eds. (2021) Comprehensive simulation of cooperative robotic system for advanced composite manufacturing : a case study. In: IOS Press. Advances in Transdisciplinary Engineering, 15 (Advanc). IOS Press, pp. 105-110. ISBN 9781643681993

Deng, Zelin and Zhou, Bo and He, Pei and Huang, Jianfeng and Alfarraj, Osama and Tolba, Amr (2021) A position-aware transformer for image captioning. Computers, Materials and Continua, 70 (1). pp. 2005-2021. ISSN 1546-2218

Mao, Junjie and Zhou, Ping and Simionescu, Aurora and Su, Yuanyuan and Fukazawa, Yasushi and Gu, Liyi and Akamatsu, Hiroki and Zhu, Zhenlin and de Plaa, Jelle and Mernier, François and Kaastra, Jelle S. (2021) Elemental abundances of the hot atmosphere of luminous infrared galaxy Arp 299. Astrophysical Journal Letters, 918 (1). L17. ISSN 2041-8213

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

Easton, David and Laidlaw, Stuart and Rahimi, Salah (2021) Relieving the stress - VSR for metallic parts. Materials World. ISSN 0967-8638

Tiwari, Divya and Miscandlon, Jill and Tiwari, Ashutosh and Jewell, Geraint W. (2021) A review of circular economy research for electric motors and the role of industry 4.0 technologies. Sustainability, 13 (17). 9668. ISSN 2071-1050

Lalvani, Himanshu and Mandal, Paranjayee (2021) Cold forming of Al-5251 and Al-6082 tailored welded blanks manufactured by laser and electron beam welding. Journal of Manufacturing Processes, 68 (Part A). pp. 1615-1636. ISSN 1526-6125

Krishnamurthy, Bhaskaran and Bylja, Olga and Watt, Kyle and Conway, Alastair and Tuffs, Martin and Blackwell, Paul; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Instability analysis in incremental rotary forming of tube flanges. In: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Minerals, Metals and Materials Series . Springer, USA, pp. 403-415. ISBN 9783030753818

Kwame, J. S. and Yakushina, E. and Blackwell, P.; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Effect of machining induced microstructure changes on the edge formability of titanium alloys at room temperature. In: Forming the Future. The Minerals, Metals & Materials Series . Springer, USA, pp. 2695-2704. ISBN 9783030753818

Kwame, JS and Yakushina, E and Blackwell, P (2021) Influence of longitudinal scratch defects on the bendability of titanium alloy. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-4.

Tong, Ruiting and Han, Bin and Zhang, Xiao and Zhang, Tao and Zeng, Quanren and Liu, Geng (2021) Molecular dynamics simulation on collision frictional properties of a molybdenum disulfide (MoS2) film in microgravity environment. Microgravity Science and Technology, 33 (4). pp. 1-14. 47. ISSN 1875-0494

da Silva, L. and Sivaswamy, G. and Sun, L. and Rahimi, S. (2021) Effect of texture and mechanical anisotropy on flow behaviour in Ti-6Al-4V alloy under superplastic forming conditions. Materials Science and Engineering: A, 819. 141367. ISSN 0921-5093

Cleaver, Christopher John and Lohmar, Johannes and Tamimi, Saeed (2021) Limits to making L-shape ring profiles without ring growth. Journal of Materials Processing Technology, 292. 117062. ISSN 0924-0136

Pavlovic, Dejan and Davison, Christopher and Hamilton, Andrew and Marko, Oskar and Atkinson, Robert and Michie, Craig and Crnojević, Vladimir and Andonovic, Ivan and Bellekens, Xavier and Tachtatzis, Christos (2021) Classification of cattle behaviours using neck-mounted accelerometer-equipped collars and convolutional neural networks. Sensors, 21 (12). 4050. ISSN 1424-8220

Fleming, Christopher (2021) An investigation into the behaviour of selected boundary regime lubricants when cold forging steel under rolling-sliding conditions. Tribology International, 157. 106771. ISSN 0301-679X

Huang, Ruoyu and Ogden, Raymond W. and Penta, Raimondo (2021) Mathematical modelling of residual-stress based volumetric growth in soft matter. Journal of Elasticity, 145 (1-2). pp. 223-241. ISSN 0374-3535

Yu, Jun and Song, Ye-pan and Lin, Xin and Cao, Zhenjie and Zeng, Quan-ren and Wang, Jun-jie and Huang, Wei-dong (2021) Compatibility research of laser additive repairing (LAR) TA15 forgings with Ti6Al4V-xTA15 alloy. Journal of Central South University, 28 (4). pp. 1015-1027. ISSN 2095-2899

MacBryde, Jillian and Reckordt, Tim and Zante, Remi and Fernandez, Benoit (2021) The Impact of Covid on UK Manufacturing Firms and Supply Chains : [Stage 1 Report]. [Report]

Hilton, Kareema and Fitzpatrick, Stephen and Violatos, Ioannis and McEwan, Chris and Mehnen, Jorn (2021) A statistics based Digital Twin for the combined consideration of heat treatment and machining for predicting distortion. Procedia CIRP. ISSN 2212-8271 (In Press)

Paquette, Arthur and Rahimi, Salah and Violatos, Ioannis and Langlois, Laurent and Dumont, Christian and Blaizot, Jérôme and Rosochowska, Malgorzata and Bigot, Régis (2021) On the evolution of microstructure and mechanical properties of type 316 austenitic stainless steel during ingot to billet conversion process. In: 24th International ESAFORM Conference on Material Forming, 2021-04-14 - 2021-04-16, Digital Event.

Vishwanath, A.S. and Rane, K. and Schaper, J. and Strano, M. and Casati, R. (2021) Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process. Powder Metallurgy, 64 (5). pp. 370-377. ISSN 1743-2901

Farid, Muhammad Asad and Strano, Matteo and Rane, Kedarnath; (2021) Optimization of process-property relations of 3D printed ceramics using extrusion-based additive manufacturing. In: ESAFORM 2021 - 24th International Conference on Material Forming. ESAFORM 2021 - 24th International Conference on Material Forming . PoPuPS (University of LiFge Library), BEL. ISBN 9782870193020

Cusanno, Angela and Moturu, Shanmukha and Carty, David and Palumbo, Gianfranco; (2021) Influence of the laser heat treatment on the AA5754-H32 strain path during hydraulic bulge tests. In: Proceedings of the 24th International ESAFORM Conference on Material Forming. ULiège Library, BEL. ISBN 9782870190036

Roszak, Jacob Aleksander and Rosochowski, Andrzej and Rosochowska, Malgorzata; (2021) Effects of lubrication, specimen preparation and tool coating on the friction behavior of commercially pure titanium at elevated temperature. In: 24th International Conference on Material Forming. Université de Liège, BEL. ISBN 9782870190036

Shi, Victor Guang and Hughes, Ruby and McKay, Alison and Chittenden, Richard and Waller, Anthony; Bae, K.-H. and Feng, B. and Kim, S. and Lazarova-Molnar, S. and Zheng, Z. and Roeder, T. and Thiesing, R., eds. (2021) Visualising the impact of early design decisions on a modular housing supply network. In: Proceedings of the 2020 Winter Simulation Conference, WSC 2020. Proceedings - Winter Simulation Conference . Institute of Electrical and Electronics Engineers Inc., USA, pp. 1432-1443. ISBN 9781728194998

Lou, S and Zhu, Z and Zeng, W and Majewski, C and Scott, PJ and Jiang, X (2021) Material ratio curve of 3D surface topography of additively manufactured parts : an attempt to characterise open surface pores. Surface Topography: Metrology and Properties, 9 (1). 015029. ISSN 2051-672X

Zhu, Mingqing and Lim, Yixian C. and Cai, Zhaoheng and Liu, Xiaochuan and Dhawan, Saksham and Liu, Jun and Politis, Denis J. (2021) Cloud FEA of hot stamping processes using a software agnostic platform. The International Journal of Advanced Manufacturing Technology, 112. pp. 3445-3458. ISSN 1433-3015

Huang, Ruoyu (2021) Finite strain modelling for multiphase flow in dual scale porous media during resin infusion process. Journal of Engineering Mathematics, 127. 5. ISSN 0022-0833

Huang, Jianfeng and McGlinchey, Don and Chen, Yi and McMahon, Daniel (2021) Cross-scale analysis of nickel Superalloy fatigue using Markov state model-molecular dynamics method. Materials and Design, 197. 109226. ISSN 0264-1275

Liu, Zhe and Turner, Thomas A. and Wong, Kok H. and Pickering, Stephen J. (2021) Development of high performance recycled carbon fibre composites with an advanced hydrodynamic fibre alignment process. Journal of Cleaner Production, 278. 123785. ISSN 0959-6526

Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Amirkhiz, Babak Shalchi and Kestens, Leo A. I. and Mohammadi, Mohsen (2021) Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation. Journal of Materials Science, 56 (1). pp. 844-853. ISSN 1573-4803

Gillespie, David I. and Hamilton, Andrew W. and Atkinson, Robert C. and Bellekens, Xavier and Michie, Craig and Andonovic, Ivan and Tachtatzis, Christos (2020) Composite laminate delamination detection using transient thermal conduction profiles and machine learning based data analysis. Sensors, 20 (24). 7227. ISSN 1424-8220

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Prediction of hole expansion ratio of titanium alloys using R programming. Journal of Modeling and Optimization, 12 (2). pp. 125-137. ISSN 1759-7676

Pavlovic, Dejan and Tachtatzis, Christos and Hamilton, Andrew and Marko, Oskar and Atkinson, Robert and Davison, Christopher and Michie, Craig and Crnojevic, Vladimir and Andonovic, Ivan (2020) Classification of cattle behaviour using convolutional neural networks. In: European Federation of Animal Science (EAAP) Annual Meeting, 2020-12-01 - 2020-12-04, Online (due to Covid-19 pandemic).

Allazadeh, M. R. and Baker, A. and Kwame, J. S. (2020) Investigating the edge forming performance of DP600 and FV 607. European Journal of Scientific Exploration, 3 (2). pp. 20-29. 3. ISSN 2616-5171

Allazadeh, Mohammad Reza (2020) Computing strain rate sensitivity of aluminium alloy 1050. International Scientific Survey Journal, 3 (2). pp. 9-27. 2. ISSN 2616-5821

Mills, James A. and Hamilton, Andrew W. and Gillespie, David I. and Andonovic, Ivan and Michie, Craig and Burnham, Kenneth and Tachtatzis, Christos (2020) Identifying defects in aerospace composite sandwich panels using high-definition distributed optical fibre sensors. Sensors, 20 (23). 6746. ISSN 1424-8220

Gillespie, David I. and Hamilton, Andrew W. and Atkinson, Robert C. and Bellekens, Xavier and Michie, Craig and Andonovic, Ivan and Tachtatzis, Christos (2020) Defect detection in aerospace sandwich composite panels using conductive thermography and contact sensors. Sensors, 20 (22). 6689. ISSN 1424-8220

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences, 2. 1999. ISSN 2523-3971

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Influence of sheet conditions on in-plane strain evolution via ex-situ tensile deformation of Ti-3Al-2.5V at room temperature. Journal of Materials and Applications, 10 (1). pp. 15-26. ISSN 2051-7750

Zhang, Yanchao and Yin, Minghu and Zeng, Quanren and Wang, Rui and Zhao, Tong (2020) Theoretical and experimental studies on the optimization of finger seal. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 14 (7). JAMDSM0107. ISSN 1881-3054

Davey, Keith and Bylya, Olga and Krishnamurthy, Bhaskaran (2020) Exact and inexact scaled models for hot forging. International Journal of Solids and Structures, 203. pp. 110-130. ISSN 0020-7683

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Reshetov, A. and Stefani, N. and Bylya, O. and Krishnamurthy, B. and Blackwell, P.; Tin, Sammy and Hardy, Mark and Clews, Justin and Cormier, Jonathan and Feng, Qiang and Marcin, John and O'Brien, Chris and Suzuki, Akane, eds. (2020) Aspects of high strain rate industrial forging of Inconel 718. In: Superalloys 2020. The Minerals, Metals & Materials Series . Springer, Cham, Switzerland, 461 - 470. ISBN 978-3-030-51834-9

Arad, Boaz and Timofte, Radu and Ben-Shahar, Ohad and Lin, Yi Tun and Finlayson, Graham and Givati, Shai and Li, Jiaojiao and Wu, Chaoxiong and Song, Rui and Li, Yunsong and Liu, Fei and Lang, Zhiqiang and Wei, Wei and Zhang, Lei and Nie, Jiangtao and Zhao, Yuzhi and Po, Lai Man and Yan, Qiong and Liu, Wei and Lin, Tingyu and Kim, Youngjung and Shin, Changyeop and Rho, Kyeongha and Kim, Sungho and Zhu, Zhiyu and Hou, Junhui and Sun, He and Ren, Jinchang and Fang, Zhenyu and Yan, Yijun and Peng, Hao and Chen, Xiaomei and Zhao, Jie and Stiebel, Tarek and Koppers, Simon and Merhof, Dorit and Gupta, Honey and Mitra, Kaushik and Fubara, Biebele Joslyn and Sedky, Mohamed and Dyke, Dave and Banerjee, Atmadeep and Palrecha, Akash and Sabarinathan, Sabarinathan and Uma, K. and Vinothini, D. Synthiya and Sathya Bama, B. and Md Mansoor Roomi, S. M.; (2020) NTIRE 2020 challenge on spectral reconstruction from an RGB image. In: Proceedings - 2020 IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops, CVPRW 2020. IEEE Computer Society Press, USA, pp. 1806-1822. ISBN 9781728193601

Gillespie, David I. and Hamilton, Andrew W. and McKay, Ewan J. and Neilson, Brian and Atkinson, Robert C. and Andonovic, Ivan and Tachtatzis, Christos (2020) Non-destructive identification of fibre orientation in multi-ply biaxial laminates using contact temperature sensors. Sensors, 20 (14). 3865. ISSN 1424-8220

Elrakayby, Hosam and Gonzalez, Diego and Gomez-Gallegos, Ares and Mandal, Paranjayee and Zuelli, Nicola (2020) A study on modelling the superplastic behaviour of Ti54M alloy. Solid State Phenomena. pp. 9-14. ISSN 1662-9779

Marini, Daniele and Corney, Jonathan R. (2020) Concurrent optimization of process parameters and product design variables for near net shape manufacturing processes. Journal of Intelligent Manufacturing. ISSN 0956-5515

Davison, Christopher and Michie, Craig and Hamilton, Andrew and Tachtatzis, Christos and Andonovic, Ivan and Gilroy, Michael (2020) Detecting heat stress in dairy cattle using neck-mounted activity collars. Agriculture, 10 (6). pp. 1-11. 210. ISSN 2077-0472

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750

Rane, Kedarnath and Barriere, Thierry and Strano, Matteo (2020) Role of elongational viscosity of feedstock in extrusion-based additive manufacturing of powder-binder mixtures. International Journal of Advanced Manufacturing Technology, 107 (11-12). pp. 4389-4402. ISSN 1433-3015

Mandal, Paranjayee and Lalvani, Himanshu and Watt, Kyle and Conway, Alastair and Tuffs, Martin (2020) A study on microstructural evolution in cold rotary forged nickel-superalloys : C263 and Inconel 718. Procedia Manufacturing, 47 (C). pp. 1403-1409. ISSN 2351-9789

Rane, Kedarnath and Petrò, Stefano and Strano, Matteo (2020) Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages. Additive Manufacturing, 32. 101038. ISSN 2214-8604

Kulakov, Mykola and Huang, Jianglin and Ntovas, Michail and Moturu, Shanmukha (2020) Microstructure evolution during hot deformation of REX734 austenitic stainless steel. Metallurgical and Materials Transactions A, 51 (2). pp. 845-854. ISSN 1073-5623

Rahimi, S. and Marrow, T.J. (2020) A new method for predicting susceptibility of austenitic stainless steels to intergranular stress corrosion cracking. Materials & Design, 187. 108368. ISSN 0264-1275

Sanjari, Mehdi and Hadadzadeh, Amir and Shahriari, Ayda and Tamimi, Saeed and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Kestens, Leo and Mohammadi, Mohsen; Peng, Zhiwei and Hwang, Jiann-Yang and Downey, Jerome and Gregurek, Dean and Zhao, Baojun and Yucel, Onuralp and Keskinkilic, Ender and Jiang, Tao and White, Jesse and Mahmoud, Morsi, eds. (2020) On the effect of building direction on the microstructure and grain morphology of a selective laser melted maraging stainless steel. In: TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Springer, USA, pp. 285-295. ISBN 978-3-030-36295-9

Zhai, Zhaoyang and Wei, Chen and Zhang, Yanchao and Cui, Yahui and Zeng, Quanren (2020) Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser. Applied Surface Science, 502. 144131. ISSN 0169-4332

Marini, Daniele and Corney, Jonathan R. (2020) Process selection methodology for near net shape manufacturing. International Journal of Advanced Manufacturing Technology, 106 (5-6). pp. 1967-1987. ISSN 1433-3015

Griffin, Allan and Hughes, Ruby and Freeman, Chris and Illingworth, James and Hodgson, Tomas and Lewis, Michael and Perez, Ejae (2019) Using advanced manufacturing technology for smarter construction. Proceedings of the Institution of Civil Engineers: Civil Engineering, 172 (6). pp. 15-21. ISSN 0965-089X

Liu, Z. and Turner, T.A. and Wong, K.H. and Pickering, S.J. (2019) Effect of fiber suspension jet stability on alignment quality of discontinuous carbon fiber tapes. International Journal of Multiphase Flow, 120. 103102. ISSN 0301-9322

Sancho, A. and Cox, M.J. and Cartwright, T. and Davies, C.M. and Hooper, P.A. and Dear, J.P. (2019) An experimental methodology to characterise post-necking behaviour and quantify ductile damage accumulation in isotropic materials. International Journal of Solids and Structures, 176-177. pp. 191-206. ISSN 0020-7683

Strano, Matteo and Rane, Kedarnath and Briatico Vangosa, Francesco and Di Landro, Luca (2019) Extrusion of metal powder-polymer mixtures : melt rheology and process stability. Journal of Materials Processing Technology, 273. 116250. ISSN 0924-0136

Ward, Michael and Allwood, Julian M. and Azevedo, Jose and Cleaver, Christopher and Cullen, Jonathan and Dunant, Cyrille and Fellin, Teppo and Hawkins, William and Horrocks, Ian and Horton, Phillipa and Ibell, Tim and Lin, Jianguo and Low, Hamish and Lupton, Rick and Murray, James and Clare, Adam and Salamati, Mohammad Reza and Cabrera Serrenho, Andre and Zhou, Wenbin (2019) Absolute Zero : Delivering the UK's climate Change Commitment with Incremental Changes to Today's Technologies. [Report]

Yakushina, E. and McArthur, M. and Canavan, M. (2019) Optimisation of laser assisted forming conditions for improved formability of aerospace materials. IOP Conference Series: Materials Science and Engineering, 672 (1). 012066. ISSN 1757-899X

Strano, Matteo and Rane, Kedarnath and Herve, Guillaume and Tosi, Anna (2019) Determination of process induced dimensional variations of ceramic parts, 3D printed by extrusion of a powder-binder feedstock. 47th SME North American Manufacturing Research Conference, NAMRC 2019, 34. pp. 560-565. ISSN 2351-9789

Whiteman, G. and Case, S. and Millett, J.C.F. and Cox, M.J. and Avraam, P. and Dear, J.P. and Sancho, A. and Hooper, P.A. (2019) Uniaxial compression of single crystal and polycrystalline tantalum. Materials Science and Engineering: A, 759. pp. 70-77. ISSN 0921-5093

Mineo, Carmelo and MacLeod, Charles Norman and Su, Riliang and Lines, David and Davi', Santi and Cowan, Bruce and Pierce, Stephen and Paton, Scott and Munro, Gavin and McCubbin, Coreen and Watson, David and Kerr, William (2019) Robotic geometric and volumetric inspection of high value and large scale aircraft wings. In: 2019 IEEE International Workshop on Metrology for AeroSpace, 2019-06-19 - 2019-06-21.

Chidambaram, S. and Giribaskar, S. and Parameswaran, Venkitanarayanan and Gouthama (2019) Structural integrity of ultrafine grain Al-3%Mg alloy under dynamic loading conditions. Procedia Structural Integrity, 14. pp. 226-233. ISSN 2452-3216

Rane, Kedarnath and Di Landro, Luca and Strano, Matteo (2019) Processability of SS316L powder - binder mixtures for vertical extrusion and deposition on table tests. Powder Technology, 345. pp. 553-562. ISSN 0032-5910

Rane, Kedarnath and Castelli, Kevin and Strano, Matteo (2019) Rapid surface quality assessment of green 3D printed metal-binder parts. Journal of Manufacturing Processes, 38. pp. 290-297. ISSN 1526-6125

de Lorenzo, Víctor and Couto, Jillian (2019) The important versus the exciting : reining contradictions in contemporary biotechnology. Microbial Biotechnology, 12 (1). pp. 32-34. ISSN 1751-7915

AlFaify, Abdullah and Hughes, James and Ridgway, Keith (2019) Controlling the porosity of 316L stainless steel parts manufactured via the powder bed fusion process. Rapid Prototyping Journal, 25 (1). pp. 162-175. ISSN 1355-2546

Rane, Kedarnath and Date, Prashant P. (2018) Recycling potential for finely divided ferrous metallic scrap using powder technology. Recycling, 3 (4). 59. ISSN 2313-4321

Sancho García, Alexander and Dear, John P. and Hooper, Paul A. and Davies, Catrin (2018) Effects of strain-rate and temperature on ductile damage and fracture of metallic materials. PhD thesis, Imperial College London.

Sancho, Alexander and Cox, Mike J. and Aldrich-Smith, Giles and Cartwright, Tim and Davies, Catrin M. and Hooper, Paul A. and Dear, John P. (2018) Experimental methodology for the measurement of plasticity on metals at high strain-rates. EPJ Web of Conferences. 02063. ISSN 2100-014X

Rane, Kedarnath and Dhokey, Narendra (2018) On the formation and distribution of in situ synthesized TiB2 reinforcements in cast aluminium matrix composites. Journal of Composites Science, 2 (3). 52. ISSN 2504-477X

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L.; (2018) A simple chemical approach to regenerating strength of thermally damaged glass fibre for reuse in composites. In: ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, GRC. ISBN 9781510896932

Rane, Kedarnath and Cataldo, Salvatore and Parenti, Paolo and Sbaglia, Luca and Mussi, Valerio and Annoni, Massimiliano and Giberti, Hermes and Strano, Matteo; Buffa, Gianluca and Fratini, Livan and Ingarao, Giuseppe and Di Lorenzo, Rosa, eds. (2018) Rapid production of hollow SS316 profiles by extrusion based additive manufacturing. In: Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. AIP Conference Proceedings, 190 . American Institute of Physics Inc., ITA. ISBN 9780735416635

Cochrane, Alex and Lander, James and Partridge, Ivana K. and Hallett, Stephen R. (2018) Evaluating Z-pin performance under high-velocity impact conditions. In: 7th Symposium on Aircraft Materials, 2018-04-24 - 2018-04-26, Universite de Technologie de Compiegne.

Garwood, Tom Lloyd and Hughes, Ben Richard and Oates, Michael R. and O'Connor, Dominic and Hughes, Ruby (2018) A review of energy simulation tools for the manufacturing sector. Renewable and Sustainable Energy Reviews, 81 (Part 1). pp. 895-911. ISSN 1364-0321

Couto, Jillian M. and McGarrity, Anne and Russell, Julie and Sloan, William T. (2018) The effect of metabolic stress on genome stability of a synthetic biology chassis Escherichia coli K12 strain. Microbial Cell Factories, 17. 8. ISSN 1475-2859

Yuan, Xiaofei and Couto, Jillian M. and Glidle, Andrew and Song, Yanqing and Sloan, William and Yin, Huabing (2017) Single-cell microfluidics to study the effects of genome deletion on bacterial growth behavior. ACS Synthetic Biology, 6 (12). pp. 2219-2227. ISSN 2161-5063

Salleh, Syed and Thokala, Praveen and Brennan, Alan and Hughes, Ruby and Booth, Andrew (2017) Simulation modelling in healthcare : an umbrella review of systematic literature reviews. PharmacoEconomics, 35 (9). pp. 937-949. ISSN 1779-2027

Falsafi, Javad and Demirci, Eemrah and Silberschmidt, Vadim V. (2016) Numerical assessment of residual formability in sheet metal products : towards design for sustainability. Journal of Physics: Conference Series, 734. ISSN 1742-6588

Pickering, S. J. and Liu, Z. and Turner, T. A. and Wong, K. H. (2016) Applications for carbon fibre recovered from composites. IOP Conference Series: Materials Science and Engineering, 139 (1). 012005. ISSN 1757-899X

Liu, Z. and Wong, K. and Thimsuvan, T. and Turner, T. and Pickering, S. (2015) Effect of fibre length and suspension concentration on alignment quality of discontinuous recycled carbon fibre. In: 20th International Conference on Composite Materials, ICCM 2015, 2015-07-19 - 2015-07-24.

Devarajan, Nagarajan and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Heck, David P. and Siddiq, Muhammad Amir (2014) Complex incremental sheet forming using back die support on aluminium 2024, 5083 and 7075 alloys. Procedia Engineering, 81. 2298–2304. ISSN 1877-7058

Escobar-Palafox, Gustavo A. and Wika, Krystian K. and Gault, Rosemary S. and Ridgway, Keith (2012) Characterisation of abrasive water-jet process for drilling titanium and carbon fibre reinforced polymer stacks. In: 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past - 2012, 2012-09-19 - 2012-09-22.

Escobar-Palafox, G.A. and Gault, R.S. and Ridgway, K. (2012) Characterisation of abrasive water-jet process for pocket milling in Inconel 718. In: 5th CIRP Conference on High Performance Cutting 2012, HPC 2012, 2012-06-04 - 2012-06-07.

Dhokey, N. B. and Rane, K. K. (2011) Wear behavior and its correlation with mechanical properties of TiB 2 reinforced aluminium-based composites. Advances in Tribology, 2011. 837469. ISSN 1687-5923

Baldwin, J.S. and Allen, P.M. and Ridgway, K. (2011) An evolutionary complex systems decision-support tool for the management of operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Baufeld, Bernd and Van Der Biest, Omer and Gault, Rosemary and Ridgway, Keith (2011) Manufacturing Ti-6Al-4V components by shaped metal deposition : microstructure and mechanical properties. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Escobar-Palafox, Gustavo and Gault, Rosemary and Ridgway, Keith (2011) Preliminary empirical models for predicting shrinkage, part geometry and metallurgical aspects of Ti-6Al-4V shaped metal deposition builds. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Geng, Zunmin and Ridgway, Keith and Turner, Sam and Morgan, Gareth (2011) Application of thin-walled dynamics for advanced manufacturing solutions. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Yao, S.M. and Teo, Wee Kin and Geng, Zunmin and Turner, Sam and Ridgway, Keith (2011) Bingham sealing and application in vacuum clamping. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Zorcolo, Alberto and Escobar-Palafox, Gustavo and Gault, Rosemary and Scott, Robin and Ridgway, Keith (2011) Study of lighting solutions in machine vision applications for automated assembly operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

This list was generated on Fri Feb 3 14:08:36 2023 GMT.