Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750 (https://doi.org/10.32732/jma.2020.9.1.32)

[thumbnail of Kwame-etal-JMA-2020-Examining-failure-behaviour-of-commercially-pure-titanium-during-tensile-deformation]
Preview
Text. Filename: Kwame_etal_JMA_2020_Examining_failure_behaviour_of_commercially_pure_titanium_during_tensile_deformation.pdf
Final Published Version
License: Creative Commons Attribution 4.0 logo

Download (2MB)| Preview

Abstract

Hole expansion ratio is a material parameter which defines the extent to which sheet metals are formed. Research has shown that, the stress state observed at the hole edge after hole expansion test is similar to those observed during conventional uniaxial tensile test. However, conventional tensile test methods are not efficient in evaluating material edge formability. This work utilised optical non-contact measuring techniques to examine failure behaviour during tensile test and hole expansion test of commercially pure titanium sheet, fabricated with either abrasive water jet cutting or electric discharge machining. The work found that, the deformation mode in conventional tensile testing are governed by localised necking and subsequently diffused necking prior to failure. Deformation mode observed in hole expansion test is characterised by localised necking with no visible occurrence of diffused necking prior to failure. The highest strains are concentrated at the hole edge during hole expansion test due to their sensitivity to the hole preparation method with accompanying multiple localised necking sites resulting in non-uniform deformation. Strains become concentrated in the bulk material microstructure rather than the machined edge during tensile testing resulting in single localised deformation site and a more homogenous deformation.

ORCID iDs

Kwame, J.S ORCID logoORCID: https://orcid.org/0000-0002-9583-0124, Yakushina, E. ORCID logoORCID: https://orcid.org/0000-0001-6498-4502 and Blackwell, P. ORCID logoORCID: https://orcid.org/0000-0001-9740-7971;