Items where department is "National Manufacturing Institute Scotland"

University Departments (240)
- Faculty of Engineering (240)
  - Design, Manufacture and Engineering Management (240)
    - National Manufacturing Institute Scotland (240)

Group by: No Grouping | Publication Date | Authors | Item type

Number of items at this level: 240.

Article

Kamenicky, Robin and Rahimi, Salaheddin and Violatos, Ioannis and Ritos, Konstantinos (2024) Numerical modelling of the water-quenching process validated through experiments with IN718 nickel-based superalloy. International Journal of Heat and Mass Transfer, 235. 126158. ISSN 0017-9310

Rane, Kedarnath and Nayak, Kanhu and Date, Prashant and Tirumalai, Srivatsan (2024) Solid state recycling of metal scrap for manufacturing net-shaped parts. International Journal of Metallic Materials. pp. 1-18.

McKay, John and Miscandlon, Jill and Konkova, Tatyana (2024) The design and optimisation of additively manufactured windings utilising data driven algorithms for minimal loss in electric machines. IEEE Access. ISSN 2169-3536 (In Press)

Adu-Amankwa, Kwaku and Rentizelas, Athanasios and Corney, Jonathan and Wodehouse, Andrew (2024) Examining replacement part supply chain links with intellectual property issues when using additive manufacturing. IFAC-PapersOnLine, 58 (19). pp. 988-993. ISSN 2405-8963

Shaikh, Mustafiz and Kahwash, Fadi and Lu, Zhilun and Alkhreisat, Mohammad and Mohammad, Ashfaq and Shyha, Islam (2024) Revolutionising orthopaedic implants : a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements. The International Journal of Advanced Manufacturing Technology, 134 (3-4). pp. 1043-1076. ISSN 1433-3015

Reda, Reham and Ashraf, Amir and Magdy, Islam and Ragab, Mohamed and Eldabaa, Nada and Abo Elmagd, Manar and Abdelhafiz, Mohamed and El-Banna, Osama and Fouad, Amr and Aly, Hayam A. and Tlija, Mehdi and Soliman, Ahmed T. and Elsayed, Ahmed and Elshaghoul, Yousef G. Y. (2024) An investigation on the potential of utilizing aluminum alloys in the production and storage of hydrogen gas. Materials, 17 (16). 4032. ISSN 1996-1944

Aslan, Ayse and Vasantha, Gokula and El Raoui, Hanane and Quigley, John and Hanson, Jack and Corney, Jonathan and Sherlock, Andrew (2024) Smarter facility layout design : leveraging worker localisation data to minimise travel time and alleviate congestion. International Journal of Production Research. pp. 1-28. ISSN 0020-7543

Reda, Reham and Khamis, Mennatullah and Ragab, Adham E. and Elsayed, Ahmed and Negm, A.M. (2024) Numerical analysis of the impact of winding angles on the mechanical performance of filament wound type 4 composite pressure vessels for compressed hydrogen gas storage. Heliyon, 10 (13). e33796. ISSN 2405-8440

Karami, Rasoul and Butler, David and Tamimi, Saeed (2024) Manufacturing of non-grain-oriented electrical steels : review. The International Journal of Advanced Manufacturing Technology, 133 (3-4). pp. 1083-1109. ISSN 1433-3015

Connolly, David and Fabris, Mathieu and Sivaswamy, Giribaskar and Rahimi, Salah and Vorontsov, Vassili (2024) Miniaturised experimental simulation and combined modelling of open-die forging of Ti-6Al-4V titanium alloy. Journal of Materials Research and Technology, 30. pp. 3622-3639. ISSN 2238-7854

Ma, Zhiyuan and Fu, Zhuojia and Chen, Haofeng and Wang, Xiaoxiao and Barbera, Daniele (2024) Extended constant life diagrams for low cycle fatigue and creep-fatigue assessments of high-temperature structures. Engineering Structures, 308. 118005. ISSN 0141-0296

Air, Alan and Wodehouse, Andrew (2024) Play well, print well : using LEGO bricks as an intuitive benchmarking tool for 3D printers. Proceedings of the Design Society, 4 (DESIGN). 1707–1716. ISSN 2732-527X

Johnston-Lynch, Katharina and Whitfield, Ian and Evans, Dorothy (2024) Systems thinking towards holistic, sustainability-oriented assessment and decision-making for lightweighting. Procedings of the Design Society, 4. pp. 1319-1328. ISSN 2732-527X

Hicks, Calum and Tamimi, Saeed and Sivaswamy, Giribaskar and Pimentel, Misael and Mckegney, Scott and Fitzpatrick, Stephen (2024) Hybrid manufacturing approach for landing gear applications : WAAM Ti–6Al–4V on forged Ti–5Al–5Mo–5V–3Cr. Journal of Materials Research and Technology, 30. pp. 6596-6608. ISSN 2238-7854

Paterson, Leigh and Miscandlon, Jill and Butler, David (2024) The juxtaposition of our future electrification solutions : a view into the unsustainable life cycle of a permanent magnet electrical machine. Sustainability, 16 (7). 2681. ISSN 2071-1050

McArthur, Stig and Mehnen, Jörn and Yokan, Catherine and Bomphray, Iain (2024) An overview of current research in automated fibre placement defect rework. Procedia Computer Science, 232. pp. 2167-2180.

King, Michael and Rahimi, Salah (2024) Optimisation of sample geometry for thermo-mechanical testing of precipitation hardenable nickel-based superalloys with an ETMT machine. Strain, 60 (1). e12458. ISSN 0039-2103

Reda, Reham and Ahmed, Yasmeen and Magdy, Islam and Nabil, Hossam and Khamis, Mennatullah and Lila, Mohamed Abo and Refaey, Ahmed and Eldabaa, Nada and Elmagd, Manar Abo and Ragab, Adham E. and Elsayed, Ahmed (2024) Wall panel structure design optimization of a hexagonal satellite. Heliyon, 10 (2). e24159. ISSN 2405-8440

Davis, Geo and Stratoudaki, Theodosia and Lukacs, Peter and Riding, Matthew W. and Al Fuwaires, Ahmed and Kamintzis, Panagiotis and Pieris, Don and Keenan, Alan and Wilcox, Paul and Pierce, Gareth and MacLeod, Charles and Williams, Stewart (2023) Near-surface defect detection in additively manufactured components using laser induced phased arrays with surface acoustic wave crosstalk suppression. Materials and Design, 236. 112453. ISSN 0261-3069

Zimermann, Rastislav and Mohseni, Ehsan and Foster, Euan A. and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K.W. and Macleod, Charles N. and Lines, David and Silva, Misael Pimentel Espirindio E. and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Rizwan, Muhammad Khalid and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of metal additive manufactured components at build using ultrasound and eddy-current approaches. Journal of Manufacturing Processes, 107. pp. 549-558. ISSN 1526-6125

Banerjee, Amborish and da Silva, Laurie and Rahimi, Salah (2023) Finite element modelling of transient behaviours and microstructural evolution during dissimilar rotary friction welding of 316 austenitic stainless steel to A516 ferritic steel. Journal of Advanced Joining Processes, 8. 100167. ISSN 2666-3309

Banerjee, Amborish and Da Silva, Laurie and Rahimi, Salah and Platts, Andrew and Rahimi, Salaheddin (2023) Evolution of microstructure in MLX®19 maraging steel during rotary friction welding and finite element modelling of the process. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 145 (10). 101011. ISSN 1528-8935

Aslan, Ayse and Vasantha, Gokula and El-Raoui, Hanane and Quigley, John and Hanson, Jack and Corney, Jonathan and Sherlock, Andrew (2023) Hierarchical ensemble deep learning for data-driven lead time prediction. The International Journal of Advanced Manufacturing Technology, 128 (9-10). pp. 4169-4188. ISSN 1433-3015

Connolly, David and Sivaswamy, Giribaskar and Rahimi, Salaheddin and Vorontsov, Vassili (2023) Miniaturised experimental simulation of open-die forging. Journal of Materials Research and Technology, 26. pp. 3146-3161. ISSN 2238-7854

Fotos, G. and Campbell, A. and Murray, P. and Yakushina, E. (2023) Deep learning enhanced Watershed for microstructural analysis using a boundary class semantic segmentation. Journal of Materials Science, 58 (36). pp. 14390-14410. ISSN 0022-2461

Belwanshi, Vinod and Rane, Kedarnath and Kumar, Vibhor and Pramanick, Bidhan (2023) Design guidelines for thin diaphragm-based microsystems through comprehensive numerical and analytical studies. Micromachines, 14 (9). 1725. ISSN 2072-666X

Levano Blanch, Oliver and Pope, Jacob and Violatos, Ioannis and Rahimi, Salaheddin and Jackson, Martin (2023) Residual stress distributions in dissimilar titanium alloy diffusion bonds produced from powder using field-assisted sintering technology (FAST-DB). Metallurgical and Materials Transactions A, 54 (9). pp. 3578-3593. ISSN 1073-5623

Peters, Sean and Andreu, Aurik and Perez, Marcos and Blackwell, Paul (2023) Improving forging outcomes of cast titanium aluminide alloy via cyclic induction heat treatment. Metals, 13 (8). 1420. ISSN 2075-4701

Jayasinghe, Sarini and Paoletti, Paolo and Jones, Nick and Green, Peter L. (2023) Predicting gas pores from photodiode measurements in laser powder bed fusion builds. Progress in Additive Manufacturing, 9 (4). pp. 885-888. ISSN 2363-9520

Elsayed, Ahmed and Gonzalez, Diego and Yakushina, Evgenia (2023) Development of the forming limit diagram for AA6016-T4 at room temperature using uniaxial tension of notched samples and a biaxial test. Crystals, 13 (7). 1134. ISSN 2073-4352

Briken, Kendra and Moore, Jed and Scholarios, Dora and Rose, Emily and Sherlock, Andrew (2023) Industry 5 and the human in human-centric manufacturing. Sensors, 23 (14). 6416. ISSN 1424-8220

Pearce, J V and Edler, F and Fateev, A and Sutton, G and Andreu, A and Machin, G (2023) Enhancing process efficiency through improved temperature measurement : the EMPRESS projects. Journal of Physics: Conference Series, 2554 (1). 012003. ISSN 1742-6588

Peters, Sean and Perez, Marcos and Blackwell, Paul (2023) Integrating HIP and homogenisation heat treatment and its effect on the workability of a conventional peritectic TiAl alloy. Intermetallics, 158. 107884. ISSN 0966-9795

Yang, Lu and Ramachandran, Saranarayanan and Bagasol, Axieh and Guan, Qiyu and Wang, Weiguang and Browne, David J. and Dowling, Denis and Mirihanage, Wajira (2023) Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion. Scripta Materialia, 231. 115430. ISSN 1359-6462

Air, Alan and Wodehouse, Andrew (2023) A DfAM framework for the design of compliant structures. Proceedings of the Design Society, 3 (ICED23). pp. 111-120. ISSN 2732-527X

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2023) Implementation of an edge-fog-cloud computing IoT architecture in aircraft components. MRS Communications, 13 (3). pp. 416-424. ISSN 2159-6867

El-Shenawy, Eman and Farahat, Ahmed I. Z. and Ragab, Adham E. and Elsayed, Ahmed and Reda, Reham (2023) Flow behavior and mechanical properties of multi-pass thermomechanically processed 7075 Al-alloy. Metals, 13 (7). 1158. ISSN 2075-4701

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2023) An extended cost analysis method for complex lightweight aircraft components manufactured with selective laser melting. SN Applied Sciences, 5 (7). 182. ISSN 2523-3971

Yan, Xiu-Tian and Browne, Jenna and Swanson, Cameron and Niu, Cong and Bisland, Graeme and Li, Youhua and Johnston, Alan (2023) An investigation of exoskeleton robotic systems in assisting construction tasks. Intelligent Information Management, 15 (3). pp. 216-241. ISSN 2160-5912

Zuiko, Ivan S. and Malopheyev, Sergey and Rahimi, Salah and Mironov, Sergey and Kaibyshev, Rustam (2023) The evolution of abnormal grains during the heating stage of a post-weld solution treatment in a friction-stir-welded 2519 aluminium alloy. Metals, 13 (6). 1033. ISSN 2075-4701

Aslan, Ayse and El-Raoui, Hanane and Hanson, Jack and Vasantha, Gokula and Quigley, John and Corney, Jonathan and Sherlock, Andrew (2023) Using worker position data for human-driven decision support in labour-intensive manufacturing. Sensors, 23 (10). 4928. ISSN 1424-8220

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2023) Testing and evaluation of the structural performance of a 3D-printed polylactic acid aircraft wing rib. Discover Mechanical Engineering, 2. 6. ISSN 2731-6564

Coyne-Grell, A. and Blaizot, J. and Rahimi, S. and Violatos, I. and Nouveau, S. and Dumont, C. and Nicolaÿ, A. and Bozzolo, N. (2023) Evolution of γ′ precipitation during the early stages of industrial forging of a nickel-based superalloy. Metallurgical and Materials Transactions A, 54 (5). pp. 2022-2036. ISSN 1073-5623

Loukas, Charalampos and Vasilev, Momchil and Zimermann, Rastislav and Vithanage, Randika K. W. and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo and Burnham, Kenneth and Sibson, Jim and O'Hare, Tom and Grosser, Michael R. (2023) Transforming industrial manipulators via kinesthetic guidance for automated inspection of complex geometries. Sensors, 23 (7). 3757. ISSN 1424-8220

Bagasol, Axieh Joy I. and Kaschel, Federico R. and Ramachandran, Saranarayanan and Mirihanage, Wajira and Browne, David J. and Dowling, Denis P. (2023) The influence of a large build area on the microstructure and mechanical properties of PBF-LB Ti-6Al-4 V alloy. The International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1355-1369. ISSN 1433-3015

Banerjee, Amborish and Wylie, Andrew and Da Silva, Laurie (2023) Near-net shape manufacture of ultra-high strength maraging steel using flow forming and inertia friction welding : experimental and microstructural characterisation. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 145 (2). 021004. ISSN 1528-8935

Huang, Ruoyu (2023) Growth spin in plant cell wall growth and remodelling. Mathematics and Mechanics of Solids, 28 (1). pp. 269-312. ISSN 1081-2865

Singh, Ajit Pal and Torrens, Rob and Gabbitas, Brian and Sivaswamy, Giribaskar (2023) Effect of heat treatments on microstructure and mechanical properties of low-cost Ti-6Al-4V alloy produced by thermo-mechanical powder consolidation route. Metals, 13 (1). 173. ISSN 2075-4701

Rane, Kedarnath and Date, Prashant and Srivatsan, T. S. (2023) Influence of material and process parameters on reduction-swelling characteristics of sintered iron pellets. Metals, 13 (1). 141. ISSN 2075-4701

Cochrane, A.D. and Serra, J. and Lander, J.K. and Böhm, H. and Wollmann, T. and Hornig, A. and Gude, M. and Partridge, I.K. and Hallett, S.R. (2022) Experimental investigation of high strain-rate, large-scale crack bridging behaviour of z-pin reinforced tapered laminates. Composites Part A: Applied Science and Manufacturing, 155. 106825. ISSN 1359-835X

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2022) Additive manufacturing process design for complex aircraft components. The International Journal of Advanced Manufacturing Technology, 123 (11-12). pp. 4195-4211. ISSN 1433-3015

Arshed, Farhan and Ahmad, Abdul and Xirouchakis, Paul and Metsios, Ioannis (2022) Laser cutting of carbon fiber reinforced plastic components for remanufacturing. Journal of Remanufacturing, 12 (3). pp. 411-433. ISSN 2210-4690

Miscandlon, Jill and Kazemi-Amiri, Abbas and Forrest, Stephen J. and Chen, Xiao and Harper, Daniel and McDonald, Alasdair and Jewell, Geraint Wyn (2022) A manufacturing driven design methodology to lightweighting of the structural elements of a permanent magnet electrical machine rotor. IEEE Access, 10. pp. 117449-117468. ISSN 2169-3536

Souza, Paul M. and Sivaswamy, Giribaskar and Bradley, Luke and Barrow, Andrew and Rahimi, Salah (2022) An innovative constitutive material model for predicting high temperature flow behaviour of inconel 625 alloy. Journal of Materials Science, 57 (44). pp. 20794-20814. ISSN 0022-2461

Loeliger, Andrew and Yang, Erfu and Bomphray, Iain (2022) A smart sensor box to increase the adaptability of automated manufacturing. Advances in Transdisciplinary Engineering, 25. pp. 31-36. ISSN 2352-7528

Sanjari, Mehdi and Mahmoudiniya, Mahdi and Pirgazi, Hadi and Tamimi, Saeed and Ghoncheh, Mohammad Hossein and Shahriairi, Ayda and Hadadzadeh, Amir and Amirkhiz, Babak Shalchi and Purdy, Mackenzie and de Araujo, Edgar Gomes and Kestens, Leo and Mohammadi, Mohsen (2022) Microstructure, texture, and anisotropic mechanical behavior of selective laser melted maraging stainless steels. Materials Characterization, 192. 112185. ISSN 1044-5803

Lu, Qiong and Zhang, Chi and Wang, Wei and Jiang, Shuai and Aucott, Lee and Yasmeen, Tabassam and Jiang, Jun (2022) Reveal the viscoplastic behaviour and microstructure evolution of stainless steel 316L. Materials, 15 (20). 7064. ISSN 1996-1944

Dogea, Ramona and Yan, Xiu T. and Millar, Richard (2022) Examining the inherent strains of aluminium alloy 7050-T7451 powder for additive manufacturing processes. MRS Communications, 12 (5). pp. 813-818.

Coyne-Grell, A. and Blaizot, J. and Rahimi, S. and Violatos, I. and Nouveau, S. and Dumont, C. and Nicolaÿ, A. and Bozzolo, N. (2022) Recrystallization mechanisms and associated microstructure evolution during billet conversion of a gamma-gamma' nickel based superalloy. Journal of Alloys and Compounds, 916. 165465. ISSN 0925-8388

Nayak, Kanhu C. and Rane, Kedarnath K. and Date, Prashant P. and Srivatsan, T. S. (2022) Synthesis of an aluminum alloy metal matrix composite using powder metallurgy : role of sintering parameters. Applied Sciences, 12 (17). 8843. ISSN 2076-3417

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and Rahimi, Salah (2022) Microstructure and mechanical properties of dissimilar inertia friction welded 316L stainless steel to A516 ferritic steel for potential applications in nuclear reactors. Manufacturing Letters, 33. pp. 33-37. ISSN 2213-8463

Hasani, N. and Ghoncheh, M.H. and Kindermann, R.M. and Pirgazi, H. and Sanjari, M. and Tamimi, S. and Shakerin, S. and Kestens, L.A.I. and Roy, M.J. and Mohammadi, M. (2022) Dislocations mobility in superalloy-steel hybrid components produced using wire arc additive manufacturing. Materials and Design, 220. 110899. ISSN 0261-3069

McPhillimy, Michael and Yakushina, Evgenia and Blackwell, Paul (2022) Tailoring titanium sheet metal using laser metal deposition to improve room temperature single-point incremental forming. Materials, 15 (17). 5985. ISSN 1996-1944

Farooqui, Tareq Ahmed and Belwanshi, Vinod and Rane, Kedarnath and Bhole, Kiran Suresh and Oak, Sachin (2022) Numerical analysis of joule heating in a Ni–Ti segmented wire used in sensing applications. Journal of The Institution of Engineers (India): Series D.

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and O'Neill, Ryan and Rahimi, Salaheddin (2022) Continuous drive friction welding of AISI 8630 low-alloy steel : experimental investigations on microstructure evolution and mechanical properties. Journal of Manufacturing Science and Engineering, 144 (7). 071001. ISSN 1528-8935

Ramachandran, S. and Zhong, Yi and Robertson, Stuart and Panteli, Christoforos and Liang, Shuibao and Wu, Fan and Zhou, Renqian and Marathe, Shashidhara and Zhou, Zhaoxia and S. Holmes, Andrew and J. Haigh, Sarah and Liu, Changqing and Mirihanage, Wajira (2022) Fast in-situ synchrotron X-ray imaging of the interfacial reaction during self-propagating exothermic reactive bonding. Materialia, 23. 101444. ISSN 2589-1529

Leonidas, Emilios and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fitzpatrick, Stephen and Willmott, Jon R. (2022) A comparative review of thermocouple and infrared radiation temperature measurement methods during the machining of metals. Sensors, 22 (13). 4693. ISSN 1424-8220

Rahimi, Salah and Violatos, Ioannis and Wynne, Bradley and Jackson, Martin (2022) Digital twins for high-value components. Materials World, 30 (6). pp. 38-41. ISSN 0967-8638

Yasmeen, Tabassam and Rahimi, Salah and Hopper, Christopher and Zhang, Chi and Jiang, Jun (2022) Unravelling thermal-mechanical effects on microstructure evolution under superplastic forming conditions in a near alpha titanium alloy. Journal of Materials Research and Technology, 18. pp. 4285-4302. ISSN 2238-7854

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and MacLeod, Charles N. and Lines, David and Javadi, Yashar and Espirindio E Silva, Misael Pimentel and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2022) Collaborative robotic Wire + Arc Additive Manufacture and sensor-enabled in-process ultrasonic Non-Destructive Evaluation. Sensors, 22 (11). 4203. ISSN 1424-8220

Air, A. and Wodehouse, A. (2022) Deformation taxonomy of additively manufactured lattice structures. Proceedings of the Design Society, 2. pp. 1361-1370. ISSN 2732-527X

Annamalai Vasantha, Gokula Vijayumar and Purves, David and Quigley, John and Corney, Jonathan and Sherlock, Andrew and Randika, Geevin (2022) Assessment of predictive probability models for effective mechanical design feature reuse. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 36. e17. ISSN 0890-0604

Ramlakhan, Shammi and Saatchi, Reza and Sabir, Lisa and Singh, Yardesh and Hughes, Ruby and Shobayo, Olamilekan and Ventour, Dale (2022) Understanding and interpreting artificial intelligence, machine learning and deep learning in emergency medicine. Emergency Medicine Journal, 39 (5). pp. 380-385. ISSN 1472-0213

Ramlakhan, Shammi L and Saatchi, Reza and Sabir, Lisa and Ventour, Dale and Shobayo, Olamilekan and Hughes, Ruby and Singh, Yardesh (2022) Building artificial intelligence and machine learning models : a primer for emergency physicians. Emergency Medicine Journal, 39 (5). e1. ISSN 1472-0213

Jayasinghe, Sarini and Paoletti, Paolo and Sutcliffe, Chris and Dardis, John and Jones, Nick and Green, Peter L. (2022) Automatic quality assessments of laser powder bed fusion builds from photodiode sensor measurements. Progress in Additive Manufacturing, 7 (2). pp. 143-160. ISSN 2363-9520

Cochrane, A.D. and Serra, J. and Lander, J.K. and Partridge, I.K. and Böhm, H. and Wollmann, T. and Hornig, A. and Gude, M. and Hallett, S.R. (2022) Experimental investigation of large-scale high-velocity soft-body impact on composite laminates. International Journal of Impact Engineering, 161. 104089. ISSN 0734-743X

Narasimharaju, Shubhavardhan Ramadurga and Zeng, Wenhan and See, Tian Long and Zhu, Zicheng and Scott, Paul and Jiang (Jane), Xiangqian and Lou, Shan (2022) A comprehensive review on laser powder bed fusion of steels : processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends. Journal of Manufacturing Processes, 75. pp. 375-414. ISSN 1526-6125

Sutton, Gavin and Korniliou, Sofia and Andreu, Aurik and Wilson, David (2022) Imaging luminescence thermometry to 750 °C for the heat treatment of common engineering alloys and comparison with thermal imaging. International Journal of Thermophysics, 43 (3). 36. ISSN 0195-928X

Rasheed, Aamir and Ion, William (2022) A novel approach towards sustainability assessment in manufacturing and stakeholder's role. Sustainability, 14 (6). 3221. ISSN 2071-1050

Yang, Manman and Yu, Leijian and Wong, Cuebong and Mineo, Carmelo and Yang, Erfu and Bomphray, Iain and Huang, Ruoyu (2022) A cooperative mobile robot and manipulator system (Co-MRMS) for transport and lay-up of ﬁbre plies in modern composite material manufacture. The International Journal of Advanced Manufacturing Technology, 119. pp. 1249-1265. ISSN 1433-3015

Oturu, Kingsley and Ijomah, Winifred and Orr, Andrew and Verpeaux, Laura and Broadfoot, Ben and Clark, Stuart and Devine, Ryan (2022) Remanufacturing of single-use medical devices : a case study on cross-border collaboration between the UK and Nigeria. Health and Technology, 12 (2). pp. 273-283. ISSN 2190-7188

Mishra, Ases Akas and Momin, Affaf and Strano, Matteo and Rane, Kedarnath (2022) Implementation of viscosity and density models for improved numerical analysis of melt flow dynamics in the nozzle during extrusion-based additive manufacturing. Progress in Additive Manufacturing, 7 (1). pp. 41-54. ISSN 2363-9520

Quigley, John and Vasantha, Gokula and Corney, Jonathan and Purves, David and Sherlock, Andrew (2022) Design as a marked point process. Journal of Mechanical Design, 144 (2). 021713. ISSN 1050-0472

Tamimi, Saeed and He, Youliang and Sanjari, Mehdi and Pirgazi, Hadi and Kockelmann, Winfried and Robinson, Fiona and Mohammadi, Mohsen and Kestens, Leo (2022) Mechanical properties and crystallographic texture of non-oriented electrical steel processed by repetitive bending under tension. Materials Science and Engineering: A, 835. 142665. ISSN 0921-5093

Souza, Paul M. and Sivaswamy, Giribaskar and Hall, Elizabeth and Rahimi, Salaheddin (2022) An analysis of the forgeability of Ti-10V-2Fe-3Al β titanium alloy using a combined Estrin Mecking and Avrami material constitutive model. International Journal of Mechanical Sciences, 216. 106975. ISSN 0020-7403

Saidi, Peyman and Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Mohammadi, Mohsen and Béland, Laurent K. and Daymond, Mark R. and Tamblyn, Isaac (2022) Deep learning and crystal plasticity : a preconditioning approach for accurate orientation evolution prediction. Computer Methods in Applied Mechanics and Engineering, 389. 114392. ISSN 0045-7825

Kulakov, Mykola and Rahimi, Salah and Semiatin, S. Lee (2022) Effect of deformation heating on microstructure evolution during hot forging of Ti-6Al-4V. Metallurgical and Materials Transactions A, 53 (2). pp. 407-419. ISSN 1073-5623

Lalvani, Himanshu and Mandal, Paranjayee and Yaghi, Anas and Santos, Pedro and Baufeld, Bernd (2022) A solid-state joining approach to manufacture of transition joints for high integrity applications. Journal of Manufacturing Processes, 73. pp. 90-111. ISSN 1526-6125

Wodehouse, Andrew and Marini, Daniele and Yakushina, Evgenia and Parker, Matthew (2022) Three pass incremental sheet forming : a new strategy for the manufacture of brass musical instruments. Journal of Manufacturing Processes, 73. pp. 483-495. ISSN 1526-6125

Campbell, A. and Murray, P. and Yakushina, E. and Borocco, A. and Dokladal, P. and Decencière, P. and Ion, W. and Marshall, S. (2022) Automated analysis of platelet microstructures using a feature length orientation space. Journal of Materials Science, 57 (2). pp. 1448-1461. ISSN 0022-2461

Banerjee, Amborish and Ntovas, Michail and Da Silva, Laurie and Rahimi, Salah and Wynne, Bradley (2021) Inter-relationship between microstructure evolution and mechanical properties in inertia friction welded 8630 low-alloy steel. Archives of Civil and Mechanical Engineering, 21 (4). 149. ISSN 1644-9665

Strano, Matteo and Rane, Kedarnath and Farid, Muhammad Asad and Mussi, Valerio and Zaragoza, Veronica and Monno, Michele (2021) Extrusion-based additive manufacturing of forming and molding tools. International Journal of Advanced Manufacturing Technology, 117 (7-8). pp. 2059-2071. ISSN 1433-3015

Dogea, Ramona and Yan, Xiu T and Millar, Richard (2021) A smart wing rib structure suitable for design for additive manufacturing (DfAM) process. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-21.

Souza, Paul M. and Sivaswamy, Giribaskar and Andreu, Aurik and Rahimi, Salaheddin (2021) A novel cyclic thermal treatment for enhanced globularisation kinetics in Ti-6Al-4V alloy : experimental, constitutive and FE based analyses. Journal of Alloys and Compounds. 162859. ISSN 0925-8388

Strazzullo, Gennaro and Ion, William J. and MacBryde, Jillian (2021) An investigation of the translational asset : a proposed classification. The Journal of the Knowledge Economy, 13 (4). pp. 3123-3149. ISSN 1868-7873

Mandal, Paranjayee (2021) Influence of carbon : metal ratio on tribological behaviour of Mo-W-C coating. Applied Sciences, 11 (21). 10189. ISSN 2076-3417

Ferguson, M. and Konkova, T. and Violatos, I. (2021) Microstructural evolution of an interface region in a nickel-based superalloy joint produced by direct energy deposition. Proceedings of the International Conference on Welding and Additive Manufacturing, 15. pp. 47-54. ISSN 1307-6892

Rahimi, S. and Violatos, I. (2021) Comparison between surface and near-surface residual stress measurement techniques using a standard four-point-bend specimen. Experimental Mechanics, 62 (2). pp. 223-236. ISSN 0014-4851

Ward, Robert and Soulatiantork, Payam and Finneran, Shaun and Hughes, Ruby and Tiwari, Ashutosh (2021) Real-time vision-based multiple object tracking of a production process : industrial digital twin case study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235 (11). pp. 1861-1872. ISSN 2041-2975

Deng, Zelin and Zhou, Bo and He, Pei and Huang, Jianfeng and Alfarraj, Osama and Tolba, Amr (2021) A position-aware transformer for image captioning. Computers, Materials and Continua, 70 (1). pp. 2005-2021. ISSN 1546-2218

Hilton, Kareema and Fitzpatrick, Stephen and Violatos, Ioannis and McEwan, Chris and Mehnen, Jorn (2021) A statistics based Digital Twin for the combined consideration of heat treatment and machining for predicting distortion. Procedia CIRP, 101. pp. 93-97. ISSN 2212-8271

Mao, Junjie and Zhou, Ping and Simionescu, Aurora and Su, Yuanyuan and Fukazawa, Yasushi and Gu, Liyi and Akamatsu, Hiroki and Zhu, Zhenlin and de Plaa, Jelle and Mernier, François and Kaastra, Jelle S. (2021) Elemental abundances of the hot atmosphere of luminous infrared galaxy Arp 299. Astrophysical Journal Letters, 918 (1). L17. ISSN 2041-8213

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

Easton, David and Laidlaw, Stuart and Rahimi, Salah (2021) Relieving the stress - VSR for metallic parts. Materials World. ISSN 0967-8638

Tiwari, Divya and Miscandlon, Jill and Tiwari, Ashutosh and Jewell, Geraint W. (2021) A review of circular economy research for electric motors and the role of industry 4.0 technologies. Sustainability, 13 (17). 9668. ISSN 2071-1050

Lalvani, Himanshu and Mandal, Paranjayee (2021) Cold forming of Al-5251 and Al-6082 tailored welded blanks manufactured by laser and electron beam welding. Journal of Manufacturing Processes, 68 (Part A). pp. 1615-1636. ISSN 1526-6125

Kwame, JS and Yakushina, E and Blackwell, P (2021) Influence of longitudinal scratch defects on the bendability of titanium alloy. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-4.

Tong, Ruiting and Han, Bin and Zhang, Xiao and Zhang, Tao and Zeng, Quanren and Liu, Geng (2021) Molecular dynamics simulation on collision frictional properties of a molybdenum disulfide (MoS2) film in microgravity environment. Microgravity Science and Technology, 33 (4). pp. 1-14. 47. ISSN 1875-0494

da Silva, L. and Sivaswamy, G. and Sun, L. and Rahimi, S. (2021) Effect of texture and mechanical anisotropy on flow behaviour in Ti-6Al-4V alloy under superplastic forming conditions. Materials Science and Engineering: A, 819. 141367. ISSN 0921-5093

Cleaver, Christopher John and Lohmar, Johannes and Tamimi, Saeed (2021) Limits to making L-shape ring profiles without ring growth. Journal of Materials Processing Technology, 292. 117062. ISSN 0924-0136

Pavlovic, Dejan and Davison, Christopher and Hamilton, Andrew and Marko, Oskar and Atkinson, Robert and Michie, Craig and Crnojević, Vladimir and Andonovic, Ivan and Bellekens, Xavier and Tachtatzis, Christos (2021) Classification of cattle behaviours using neck-mounted accelerometer-equipped collars and convolutional neural networks. Sensors, 21 (12). 4050. ISSN 1424-8220

Fleming, Christopher (2021) An investigation into the behaviour of selected boundary regime lubricants when cold forging steel under rolling-sliding conditions. Tribology International, 157. 106771. ISSN 0301-679X

Huang, Ruoyu and Ogden, Raymond W. and Penta, Raimondo (2021) Mathematical modelling of residual-stress based volumetric growth in soft matter. Journal of Elasticity, 145 (1-2). pp. 223-241. ISSN 0374-3535

Yu, Jun and Song, Ye-pan and Lin, Xin and Cao, Zhenjie and Zeng, Quan-ren and Wang, Jun-jie and Huang, Wei-dong (2021) Compatibility research of laser additive repairing (LAR) TA15 forgings with Ti6Al4V-xTA15 alloy. Journal of Central South University, 28 (4). pp. 1015-1027. ISSN 2095-2899

Wolter, Nick and Carrillo Beber, Vinicius and Yokan, Catherine Mae and Storz, Christof and Mayer, Bernd and Koschek, Katharina (2021) The effects of manufacturing processes on the physical and mechanical properties of basalt fibre reinforced polybenzoxazine. Composites Communications, 24. 100646. ISSN 2452-2139

Vishwanath, A.S. and Rane, K. and Schaper, J. and Strano, M. and Casati, R. (2021) Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process. Powder Metallurgy, 64 (5). pp. 370-377. ISSN 1743-2901

Lou, S and Zhu, Z and Zeng, W and Majewski, C and Scott, PJ and Jiang, X (2021) Material ratio curve of 3D surface topography of additively manufactured parts : an attempt to characterise open surface pores. Surface Topography: Metrology and Properties, 9 (1). 015029. ISSN 2051-672X

Zhu, Mingqing and Lim, Yixian C. and Cai, Zhaoheng and Liu, Xiaochuan and Dhawan, Saksham and Liu, Jun and Politis, Denis J. (2021) Cloud FEA of hot stamping processes using a software agnostic platform. The International Journal of Advanced Manufacturing Technology, 112. pp. 3445-3458. ISSN 1433-3015

Huang, Ruoyu (2021) Finite strain modelling for multiphase flow in dual scale porous media during resin infusion process. Journal of Engineering Mathematics, 127. 5. ISSN 0022-0833

Huang, Jianfeng and McGlinchey, Don and Chen, Yi and McMahon, Daniel (2021) Cross-scale analysis of nickel Superalloy fatigue using Markov state model-molecular dynamics method. Materials and Design, 197. 109226. ISSN 0264-1275

Liu, Zhe and Turner, Thomas A. and Wong, Kok H. and Pickering, Stephen J. (2021) Development of high performance recycled carbon fibre composites with an advanced hydrodynamic fibre alignment process. Journal of Cleaner Production, 278. 123785. ISSN 0959-6526

Pirgazi, Hadi and Sanjari, Mehdi and Tamimi, Saeed and Amirkhiz, Babak Shalchi and Kestens, Leo A. I. and Mohammadi, Mohsen (2021) Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation. Journal of Materials Science, 56 (1). pp. 844-853. ISSN 1573-4803

Gillespie, David I. and Hamilton, Andrew W. and Atkinson, Robert C. and Bellekens, Xavier and Michie, Craig and Andonovic, Ivan and Tachtatzis, Christos (2020) Composite laminate delamination detection using transient thermal conduction profiles and machine learning based data analysis. Sensors, 20 (24). 7227. ISSN 1424-8220

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Prediction of hole expansion ratio of titanium alloys using R programming. Journal of Modeling and Optimization, 12 (2). pp. 125-137. ISSN 1759-7676

Allazadeh, M. R. and Baker, A. and Kwame, J. S. (2020) Investigating the edge forming performance of DP600 and FV 607. European Journal of Scientific Exploration, 3 (2). pp. 20-29. 3. ISSN 2616-5171

Allazadeh, Mohammad Reza (2020) Computing strain rate sensitivity of aluminium alloy 1050. International Scientific Survey Journal, 3 (2). pp. 9-27. 2. ISSN 2616-5821

Mills, James A. and Hamilton, Andrew W. and Gillespie, David I. and Andonovic, Ivan and Michie, Craig and Burnham, Kenneth and Tachtatzis, Christos (2020) Identifying defects in aerospace composite sandwich panels using high-definition distributed optical fibre sensors. Sensors, 20 (23). 6746. ISSN 1424-8220

Gillespie, David I. and Hamilton, Andrew W. and Atkinson, Robert C. and Bellekens, Xavier and Michie, Craig and Andonovic, Ivan and Tachtatzis, Christos (2020) Defect detection in aerospace sandwich composite panels using conductive thermography and contact sensors. Sensors, 20 (22). 6689. ISSN 1424-8220

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences, 2. 1999. ISSN 2523-3971

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Influence of sheet conditions on in-plane strain evolution via ex-situ tensile deformation of Ti-3Al-2.5V at room temperature. Journal of Materials and Applications, 10 (1). pp. 15-26. ISSN 2051-7750

Zhang, Yanchao and Yin, Minghu and Zeng, Quanren and Wang, Rui and Zhao, Tong (2020) Theoretical and experimental studies on the optimization of finger seal. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 14 (7). JAMDSM0107. ISSN 1881-3054

Davey, Keith and Bylya, Olga and Krishnamurthy, Bhaskaran (2020) Exact and inexact scaled models for hot forging. International Journal of Solids and Structures, 203. pp. 110-130. ISSN 0020-7683

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Gillespie, David I. and Hamilton, Andrew W. and McKay, Ewan J. and Neilson, Brian and Atkinson, Robert C. and Andonovic, Ivan and Tachtatzis, Christos (2020) Non-destructive identification of fibre orientation in multi-ply biaxial laminates using contact temperature sensors. Sensors, 20 (14). 3865. ISSN 1424-8220

Elrakayby, Hosam and Gonzalez, Diego and Gomez-Gallegos, Ares and Mandal, Paranjayee and Zuelli, Nicola (2020) A study on modelling the superplastic behaviour of Ti54M alloy. Solid State Phenomena. pp. 9-14. ISSN 1662-9779

Marini, Daniele and Corney, Jonathan R. (2020) Concurrent optimization of process parameters and product design variables for near net shape manufacturing processes. Journal of Intelligent Manufacturing. ISSN 0956-5515

Davison, Christopher and Michie, Craig and Hamilton, Andrew and Tachtatzis, Christos and Andonovic, Ivan and Gilroy, Michael (2020) Detecting heat stress in dairy cattle using neck-mounted activity collars. Agriculture, 10 (6). pp. 1-11. 210. ISSN 2077-0472

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750

Rane, Kedarnath and Barriere, Thierry and Strano, Matteo (2020) Role of elongational viscosity of feedstock in extrusion-based additive manufacturing of powder-binder mixtures. International Journal of Advanced Manufacturing Technology, 107 (11-12). pp. 4389-4402. ISSN 1433-3015

Mandal, Paranjayee and Lalvani, Himanshu and Watt, Kyle and Conway, Alastair and Tuffs, Martin (2020) A study on microstructural evolution in cold rotary forged nickel-superalloys : C263 and Inconel 718. Procedia Manufacturing, 47 (C). pp. 1403-1409. ISSN 2351-9789

Rane, Kedarnath and Petrò, Stefano and Strano, Matteo (2020) Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages. Additive Manufacturing, 32. 101038. ISSN 2214-8604

Kulakov, Mykola and Huang, Jianglin and Ntovas, Michail and Moturu, Shanmukha (2020) Microstructure evolution during hot deformation of REX734 austenitic stainless steel. Metallurgical and Materials Transactions A, 51 (2). pp. 845-854. ISSN 1073-5623

Rahimi, S. and Marrow, T.J. (2020) A new method for predicting susceptibility of austenitic stainless steels to intergranular stress corrosion cracking. Materials & Design, 187. 108368. ISSN 0264-1275

Zhai, Zhaoyang and Wei, Chen and Zhang, Yanchao and Cui, Yahui and Zeng, Quanren (2020) Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser. Applied Surface Science, 502. 144131. ISSN 0169-4332

Marini, Daniele and Corney, Jonathan R. (2020) Process selection methodology for near net shape manufacturing. International Journal of Advanced Manufacturing Technology, 106 (5-6). pp. 1967-1987. ISSN 1433-3015

Griffin, Allan and Hughes, Ruby and Freeman, Chris and Illingworth, James and Hodgson, Tomas and Lewis, Michael and Perez, Ejae (2019) Using advanced manufacturing technology for smarter construction. Proceedings of the Institution of Civil Engineers: Civil Engineering, 172 (6). pp. 15-21. ISSN 0965-089X

Liu, Z. and Turner, T.A. and Wong, K.H. and Pickering, S.J. (2019) Effect of fiber suspension jet stability on alignment quality of discontinuous carbon fiber tapes. International Journal of Multiphase Flow, 120. 103102. ISSN 0301-9322

Sancho, A. and Cox, M.J. and Cartwright, T. and Davies, C.M. and Hooper, P.A. and Dear, J.P. (2019) An experimental methodology to characterise post-necking behaviour and quantify ductile damage accumulation in isotropic materials. International Journal of Solids and Structures, 176-177. pp. 191-206. ISSN 0020-7683

Strano, Matteo and Rane, Kedarnath and Briatico Vangosa, Francesco and Di Landro, Luca (2019) Extrusion of metal powder-polymer mixtures : melt rheology and process stability. Journal of Materials Processing Technology, 273. 116250. ISSN 0924-0136

Yakushina, E. and McArthur, M. and Canavan, M. (2019) Optimisation of laser assisted forming conditions for improved formability of aerospace materials. IOP Conference Series: Materials Science and Engineering, 672 (1). 012066. ISSN 1757-899X

Strano, Matteo and Rane, Kedarnath and Herve, Guillaume and Tosi, Anna (2019) Determination of process induced dimensional variations of ceramic parts, 3D printed by extrusion of a powder-binder feedstock. 47th SME North American Manufacturing Research Conference, NAMRC 2019, 34. pp. 560-565. ISSN 2351-9789

Whiteman, G. and Case, S. and Millett, J.C.F. and Cox, M.J. and Avraam, P. and Dear, J.P. and Sancho, A. and Hooper, P.A. (2019) Uniaxial compression of single crystal and polycrystalline tantalum. Materials Science and Engineering: A, 759. pp. 70-77. ISSN 0921-5093

Chidambaram, S. and Giribaskar, S. and Parameswaran, Venkitanarayanan and Gouthama (2019) Structural integrity of ultrafine grain Al-3%Mg alloy under dynamic loading conditions. Procedia Structural Integrity, 14. pp. 226-233. ISSN 2452-3216

Okaro, Ikenna A. and Jayasinghe, Sarini and Sutcliffe, Chris and Black, Kate and Paoletti, Paolo and Green, Peter L. (2019) Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning. Additive Manufacturing, 27. pp. 42-53. ISSN 2214-8604

Marquez, Jessica J. and Miller, Matthew J. and Cohen, Tamar and Deliz, Ivonne and Lees, David S. and Zheng, Jimin and Lee, Yeon J. and Kanefsky, Bob and Norheim, Johannes and Deans, Matthew and Hillenius, Steven (2019) Future needs for science-driven geospatial and temporal extravehicular activity planning and execution. Astrobiology, 19 (3). pp. 440-461.

Rane, Kedarnath and Di Landro, Luca and Strano, Matteo (2019) Processability of SS316L powder - binder mixtures for vertical extrusion and deposition on table tests. Powder Technology, 345. pp. 553-562. ISSN 0032-5910

Rane, Kedarnath and Castelli, Kevin and Strano, Matteo (2019) Rapid surface quality assessment of green 3D printed metal-binder parts. Journal of Manufacturing Processes, 38. pp. 290-297. ISSN 1526-6125

de Lorenzo, Víctor and Couto, Jillian (2019) The important versus the exciting : reining contradictions in contemporary biotechnology. Microbial Biotechnology, 12 (1). pp. 32-34. ISSN 1751-7915

AlFaify, Abdullah and Hughes, James and Ridgway, Keith (2019) Controlling the porosity of 316L stainless steel parts manufactured via the powder bed fusion process. Rapid Prototyping Journal, 25 (1). pp. 162-175. ISSN 1355-2546

Rane, Kedarnath and Date, Prashant P. (2018) Recycling potential for finely divided ferrous metallic scrap using powder technology. Recycling, 3 (4). 59. ISSN 2313-4321

Sancho, Alexander and Cox, Mike J. and Aldrich-Smith, Giles and Cartwright, Tim and Davies, Catrin M. and Hooper, Paul A. and Dear, John P. (2018) Experimental methodology for the measurement of plasticity on metals at high strain-rates. EPJ Web of Conferences. 02063. ISSN 2100-014X

Rane, Kedarnath and Dhokey, Narendra (2018) On the formation and distribution of in situ synthesized TiB2 reinforcements in cast aluminium matrix composites. Journal of Composites Science, 2 (3). 52. ISSN 2504-477X

Jadhav, Sandip and Schoiswohl, Martin and Buchmayr, Bruno (2018) Applications of finite element simulation in the development of advanced sheet metal forming processes. BHM Berg- und Hüttenmännische Monatshefte, 163 (3). pp. 109-118. ISSN 1613-7531

Garwood, Tom Lloyd and Hughes, Ben Richard and Oates, Michael R. and O'Connor, Dominic and Hughes, Ruby (2018) A review of energy simulation tools for the manufacturing sector. Renewable and Sustainable Energy Reviews, 81 (Part 1). pp. 895-911. ISSN 1879-0690

Couto, Jillian M. and McGarrity, Anne and Russell, Julie and Sloan, William T. (2018) The effect of metabolic stress on genome stability of a synthetic biology chassis Escherichia coli K12 strain. Microbial Cell Factories, 17. 8. ISSN 1475-2859

Yuan, Xiaofei and Couto, Jillian M. and Glidle, Andrew and Song, Yanqing and Sloan, William and Yin, Huabing (2017) Single-cell microfluidics to study the effects of genome deletion on bacterial growth behavior. ACS Synthetic Biology, 6 (12). pp. 2219-2227. ISSN 2161-5063

Bylya, O. I. and Ward, M. and Krishnamurthy, B. and Tamang, S. and Vasin, R. A. (2017) Modelling challenges for incremental bulk processes despite advances in simulation technology : example issues and approaches. Procedia Engineering, 207. pp. 2358-2363. ISSN 1877-7058

Salleh, Syed and Thokala, Praveen and Brennan, Alan and Hughes, Ruby and Booth, Andrew (2017) Simulation modelling in healthcare : an umbrella review of systematic literature reviews. PharmacoEconomics, 35 (9). pp. 937-949. ISSN 1779-2027

Falsafi, Javad and Demirci, Eemrah and Silberschmidt, Vadim V. (2016) Numerical assessment of residual formability in sheet metal products : towards design for sustainability. Journal of Physics: Conference Series, 734. ISSN 1742-6588

Pickering, S. J. and Liu, Z. and Turner, T. A. and Wong, K. H. (2016) Applications for carbon fibre recovered from composites. IOP Conference Series: Materials Science and Engineering, 139 (1). 012005. ISSN 1757-899X

Jadhav, Sandip and Tekale, Ratneshwar and Date, Prashant P. (2016) Analysis of Strain Non-uniformity Index (SNI) for different geometries of drawn sheet metal parts. Journal of Physics: Conference Series, 734. 032098. ISSN 1742-6588

Devarajan, Nagarajan and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Heck, David P. and Siddiq, Muhammad Amir (2014) Complex incremental sheet forming using back die support on aluminium 2024, 5083 and 7075 alloys. Procedia Engineering, 81. 2298–2304. ISSN 1877-7058

Huang, R. and Becker, A. A. and Jones, I. A. (2012) Modelling cell wall growth using a fibre-reinforced hyperelastic–viscoplastic constitutive law. Journal of the Mechanics and Physics of Solids, 60 (4). pp. 750-783. ISSN 0022-5096

Dhokey, N. B. and Rane, K. K. (2011) Wear behavior and its correlation with mechanical properties of TiB 2 reinforced aluminium-based composites. Advances in Tribology, 2011. 837469. ISSN 1687-5923

Baldwin, J.S. and Allen, P.M. and Ridgway, K. (2011) An evolutionary complex systems decision-support tool for the management of operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Baufeld, Bernd and Van Der Biest, Omer and Gault, Rosemary and Ridgway, Keith (2011) Manufacturing Ti-6Al-4V components by shaped metal deposition : microstructure and mechanical properties. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Escobar-Palafox, Gustavo and Gault, Rosemary and Ridgway, Keith (2011) Preliminary empirical models for predicting shrinkage, part geometry and metallurgical aspects of Ti-6Al-4V shaped metal deposition builds. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Geng, Zunmin and Ridgway, Keith and Turner, Sam and Morgan, Gareth (2011) Application of thin-walled dynamics for advanced manufacturing solutions. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Yao, S.M. and Teo, Wee Kin and Geng, Zunmin and Turner, Sam and Ridgway, Keith (2011) Bingham sealing and application in vacuum clamping. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Zorcolo, Alberto and Escobar-Palafox, Gustavo and Gault, Rosemary and Scott, Robin and Ridgway, Keith (2011) Study of lighting solutions in machine vision applications for automated assembly operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Book Section

Ait Ameur, Mohamed Adlan and Yang, Erfu and Brady, Scott; (2024) Advancing healthcare through intelligent human-robot collaboration : overview, challenges and opportunities. In: 2024 29th International Conference on Automation and Computing (ICAC). IEEE, GBR, pp. 1-6. ISBN 979-8-3503-6088-2

Adu-Amankwa, Kwaku and Wodehouse, Andrew and Daly, Angela and Rentizelas, Athanasios and Corney, Jonathan; Thürer, Matthias and Riedel, Ralph and von Cieminski, Gregor and Romero, David, eds. (2024) Trading digital-valued assets within cyber-physical manufacturing supply chains : a scoping review of additive manufacturing and digital trade. In: Advances in Production Management Systems. Production Management Systems for Volatile, Uncertain, Complex, and Ambiguous Environments. Springer, DEU, pp. 91-104. ISBN 9783031658945

Arcidiacono, Mauro Francisco and Violatos, Ioannis and Rahimi, Salaheddin; Cawte, E. R. and Cockings, H. L. and Stekovic, S. and Yates, J. R., eds. (2024) Predicting fatigue crack initiation in milled aerospace grade Ti-6Al-4V parts using CPFEM. In: Proceedings of the 9th Engineering Integrity Society International Conference on Durability & Fatigue. Engineering Integrity Society, GBR, pp. 115-126. ISBN 978-0-9544368-7-2

Sancho, Alexander and Mandal, Paranjayee and Knowles, Craig and Gonzalez, Diego; Cabrera Marrero, José María, ed. (2023) Mechanical and microstructural analysis of Ti-6Al-4V material in a wide range of superplastic forming conditions. In: Superplasticity in Advanced Materials. Materials Research Proceedings . Materials Research Forum LLC, ESP, 103 - 110. ISBN 9781644902615

Tamimi, Saeed and Huang, Jianglin; Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot, Régis and Balan, Tudor, eds. (2023) Numerical and experimental investigation of deformation characteristics during high-frequency radial forging of AA7075. In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Springer, FRA, pp. 72-79. ISBN 9783031410239

Reshetov, Aleksey and Bylya, Olga; Madej, Lukasz and Sitko, Mateusz and Perzynsk, Konrad, eds. (2023) Benchmarking mean-field models available in commercial FE software in application to two-blow forging of IN718 alloy. In: Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Materials Research Proceedings . Materials Research Forum LLC, POL, pp. 683-692. ISBN 9781644902462

Krishnamurthy, Bhaskaran and Shitikov, Andrei and Blackwell, Paul and Bylya, Olga; Madej, Lukasz and Sitko, Mateusz and Perzynsk, Konrad, eds. (2023) Influence of mesh in modelling of flow forming process. In: Materials Research Proceedings. UNSPECIFIED, POL, pp. 1583-1592. ISBN 9781644902479

Paquette, Arthur and Langlois, Laurent and Violatos, Ioannis and Rahimi, Salah and Dumont, Christian and Bigot, Régis; Madej, Lukasz and Sitko, Mateusz and Perzynsk, Konrad, eds. (2023) Determination of recrystallisation phenomenon in type 316 stainless steel VIM-VAR ingots during cogging operations. In: Materials Research Proceedings. Materials Research Forum, POL, pp. 621-628. ISBN 9781644902479

El-Raoui, Hanane and Quigley, John and Sherlock, Andrew and Aslan, Ayse and Corney, Jonathan and Hanson, Jack and Vasantha, Gokula; (2023) Agent based simulation of workers' behaviours around hazard areas in manufacturing sites. In: Proceedings of the Simulation Workshop 2023. OR Society.

von Freeden, Justus and de Wit, Jesper and Caba, Stefan and Kroll, Susanne and Zhao, Huan and Ren, Jinchang and Yan, Yijun and Arshed, Farhan and Ahmad, Abdul and Xirouchakis, Paul; Colledani, Marcello and Turri, Stefano, eds. (2023) Composite repair and remanufacturing. In: Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing AG, Cham, Switzerland, pp. 191-214. ISBN 9783031223525

Aburaed, Nour and Alkhatib, Mohammed Q. and Marshall, Stephen and Zabalza, Jaime and Al Ahmad, Hussain; (2022) A comparative study of loss functions for hyperspectral SISR. In: 30th European Signal Processing Conference, EUSIPCO 2022 - Proceedings. European Signal Processing Conference . European Signal Processing Conference, EUSIPCO, SRB, pp. 484-487. ISBN 9789082797091

Michie, C. and Andonovic, I. and Tachtatzis, C. and Davison, C. and Hamilton, A.; Banhazi, Thomas and Molina, Francisco Maroto and Halas, Veronika, eds. (2022) Chapter 3: Herdsman+: artificial intelligence enabled systems and services for livestock farming : Herdsman+ artificial intelligence enabled systems and services for livestock farming. In: Practical Precision Livestock Farming (PLF). Practical Precision Livestock Farming . Wageningen Academic Publishers, Wageningen, The Netherlands, pp. 53-70. ISBN 9789086869343

Aburaed, Nour and Alkhatib, Mohammed Q. and Marshall, Stephen and Zabalza, Jaime and Al Ahmad, Hussain; (2021) 3D expansion of SRCNN for spatial enhancement of hyperspectral remote sensing images. In: 2021 4th International Conference on Signal Processing and Information Security, ICSPIS 2021. 2021 4th International Conference on Signal Processing and Information Security, ICSPIS 2021 . Institute of Electrical and Electronics Engineers Inc., ARE, pp. 9-12. ISBN 9781665437967

Loeliger, Andrew and Yang, Erfu and Bomphray, Iain; (2021) An overview of automated manufacturing for composite materials. In: 2021 26th International Conference on Automation and Computing (ICAC). IEEE, GBR, pp. 1-6. ISBN 9781860435577

Yang, Manman and Yu, Leijian and Wong, Cuebong and Mineo, Carmelo and Yang, Erfu and Bomphray, Iain and Huang, Ruoyu and Brady, Scott; Shafik, Mahmoud and Case, Keith, eds. (2021) Comprehensive simulation of cooperative robotic system for advanced composite manufacturing : a case study. In: IOS Press. Advances in Transdisciplinary Engineering, 15 (Advanc). IOS Press, pp. 105-110. ISBN 9781643681993

Krishnamurthy, Bhaskaran and Bylja, Olga and Watt, Kyle and Conway, Alastair and Tuffs, Martin and Blackwell, Paul; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Instability analysis in incremental rotary forming of tube flanges. In: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Minerals, Metals and Materials Series . Springer, USA, pp. 403-415. ISBN 9783030753818

Kwame, J. S. and Yakushina, E. and Blackwell, P.; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Effect of machining induced microstructure changes on the edge formability of titanium alloys at room temperature. In: Forming the Future. The Minerals, Metals & Materials Series . Springer, USA, pp. 2695-2704. ISBN 9783030753818

Farid, Muhammad Asad and Strano, Matteo and Rane, Kedarnath; (2021) Optimization of process-property relations of 3D printed ceramics using extrusion-based additive manufacturing. In: ESAFORM 2021 - 24th International Conference on Material Forming. ESAFORM 2021 - 24th International Conference on Material Forming . PoPuPS (University of LiFge Library), BEL. ISBN 9782870193020

Cusanno, Angela and Moturu, Shanmukha and Carty, David and Palumbo, Gianfranco; (2021) Influence of the laser heat treatment on the AA5754-H32 strain path during hydraulic bulge tests. In: Proceedings of the 24th International ESAFORM Conference on Material Forming. ULiège Library, BEL. ISBN 9782870190036

Roszak, Jacob Aleksander and Rosochowski, Andrzej and Rosochowska, Malgorzata; (2021) Effects of lubrication, specimen preparation and tool coating on the friction behavior of commercially pure titanium at elevated temperature. In: 24th International Conference on Material Forming. Université de Liège, BEL. ISBN 9782870190036

Shi, Victor Guang and Hughes, Ruby and McKay, Alison and Chittenden, Richard and Waller, Anthony; Bae, K.-H. and Feng, B. and Kim, S. and Lazarova-Molnar, S. and Zheng, Z. and Roeder, T. and Thiesing, R., eds. (2021) Visualising the impact of early design decisions on a modular housing supply network. In: Proceedings of the 2020 Winter Simulation Conference, WSC 2020. Proceedings - Winter Simulation Conference . Institute of Electrical and Electronics Engineers Inc., USA, pp. 1432-1443. ISBN 9781728194998

Reshetov, A. and Stefani, N. and Bylya, O. and Krishnamurthy, B. and Blackwell, P.; Tin, Sammy and Hardy, Mark and Clews, Justin and Cormier, Jonathan and Feng, Qiang and Marcin, John and O'Brien, Chris and Suzuki, Akane, eds. (2020) Aspects of high strain rate industrial forging of Inconel 718. In: Superalloys 2020. The Minerals, Metals & Materials Series . Springer, Cham, Switzerland, 461 - 470. ISBN 978-3-030-51834-9

Sanjari, Mehdi and Hadadzadeh, Amir and Shahriari, Ayda and Tamimi, Saeed and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Kestens, Leo and Mohammadi, Mohsen; Peng, Zhiwei and Hwang, Jiann-Yang and Downey, Jerome and Gregurek, Dean and Zhao, Baojun and Yucel, Onuralp and Keskinkilic, Ender and Jiang, Tao and White, Jesse and Mahmoud, Morsi, eds. (2020) On the effect of building direction on the microstructure and grain morphology of a selective laser melted maraging stainless steel. In: TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Springer, USA, pp. 285-295. ISBN 978-3-030-36295-9

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L.; (2018) A simple chemical approach to regenerating strength of thermally damaged glass fibre for reuse in composites. In: ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, GRC. ISBN 9781510896932

Rane, Kedarnath and Cataldo, Salvatore and Parenti, Paolo and Sbaglia, Luca and Mussi, Valerio and Annoni, Massimiliano and Giberti, Hermes and Strano, Matteo; Buffa, Gianluca and Fratini, Livan and Ingarao, Giuseppe and Di Lorenzo, Rosa, eds. (2018) Rapid production of hollow SS316 profiles by extrusion based additive manufacturing. In: Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. AIP Conference Proceedings, 190 . American Institute of Physics Inc., ITA. ISBN 9780735416635

Conference or Workshop Item

Allazadeh, Mohammad and Petrovski, Hannah (2024) Investigating the circular economy of PET in food packaging : addressing concerns about PET bottled water. In: Scotland Manufacturing & Supply Chain Conference and Exhibition, 2024-10-23 - 2024-10-24, SEC.

Petrovski, Hannah and Allazadeh, Mohammad (2024) Optimising the circular economy of beverage packaging : comparing aluminium and PET for beverage packaging. In: National Manufacturing Institute 2024 Intern Showcase Day, 2024-08-15 - 2024-08-15.

McArthur, Stig and McKnight, Shaun and Bomphray, Iain and Mehnen, Jörn (2024) Rework signature : assessing quality of reworked defects in automated fibre placement composites. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.

Germano, Elmergue and Walker, Joseph and Mills, Brandon and Javadi, Yashar and Buffa, Gianluca and MacLeod, Charles Norman and Gachagan, Anthony and Pierce, Gareth and Mineo, Carmelo and Tamimi, Saeed and Mohseni, Ehsan and Lam, Kwok Ho (2024) Enhancing additive friction stir deposition through comprehensive ultrasonic defect detection and process optimisation. In: UK & IRELAND IEEE ULTRASONICS, FERROELECTRICS AND FREQUENCY CONTROL CHAPTER, 2024-05-14 - 2024-05-14, AUDITORIUM C, TECHNOLOGY AND INNOVATION CENTRE, UNIVERSITY 0F STRATHCLYDE, 99 GEORGE ST, GLASGOW.

El-Raoui, Hanane and Quigley, John and Aslan, Ayse and Vasantha, Gokula and Hanson, Jack and Corney, Jonathan and Sherlock, Andrew (2023) Design of a serious game for safety in manufacturing industry using hybrid simulation modelling : towards eliciting risk preferences. In: 2023 Winter Simulation Conference, 2023-12-10 - 2023-12-13, San Antonio Marriott Rivercenter.

Gomes, Rylan and Mohseni, Ehsan and Pierce, Gareth and Burnham, Kenneth Charles and MacLeod, Charles Norman and Tunukovic, Vedran and Foster, Euan and O'Hare, Tom and Munro, Gavin (2023) Application of eddy currents for inspection of carbon fibre composites. In: 60th Annual British Conference on NDT, 2023-09-12 - 2023-09-14, Northampton Town Centre Hotel, Northampton, UK.

Kiefer, Drew and Luo, Xichun and Reimer, Andreas and Evans, Dorothy (2023) Robotic machining : status, challenges and future trends. In: ICAC 2023: 28th IEEE International Conference on Automation and Computing, 2023-08-30 - 2023-09-01, Aston University.

Liu, Zhe and Awang Ngah, Shamsiah and Mills, James A. and Turner, Thomas A. (2023) Performance of discontinuous aligned glass fibre mat and wet-laid non-woven material from recycled wind turbines. In: The 23rd International Conference on Composite Materials, 2023-07-31 - 2023-08-04, The ICC Belfast.

Mills, James A. and Awang-Ngah, Shamsiah and Liu, Zhe (2023) Developing recycled carbon fibre reinforced material for sustainable additive manufacturing. In: The 23rd International Conference on Composite Materials, 2023-07-31 - 2023-08-04, The ICC Belfast.

Yokan, Catherine M. and Bartsiokas, Ioannis and Gallen, Paul and Min, Harrison and De Cola, Francesco (2023) HRCEV : High-rate composites for electric vehicles. In: The 23rd International Conference on Composite Materials, 2023-07-31 - 2023-08-04, The ICC Belfast.

Steward, Elise and Quigley, John and Roberts, Jennifer J and Sherlock, Andrew (2023) The role of hydrogen in the decarbonisation of the steel industry : upstream and downstream in the UK and Ontario. In: International Green Energy Conference, 2023-07-10 - 2023-07-13.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Wathavana Vithanage, Randika Kosala and MacLeod, Charles Norman and Pierce, Gareth and Lines, David and Pimentel Espirindio E Silva, Misael and Fitzpatrick, Stephen and Rizwan, Muhammad Khalid and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Appleby, Andrew and Reimer, Andreas (2023) Manufacturing impact assessment for remanufacture of a forging die. In: International Conference on Remanufacturing 2023, 2023-06-27 - 2023-06-29, RAI.

Zimermann, Rastislav and Rizwan, Mohammad Khalid and Loukas, Charalampos and Vasilev, Momchil and Mohseni, Ehsan and Vithanage, Randika K.W. and MacLeod, Charles N. and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2023) Dry-coupled ultrasound phased array inspection of as-built complex geometry metal additive manufactured components. In: 31st ASNT Research symposium, 2023-06-20 - 2023-06-23, Greater Columbus Convention Centre.

Mohseni, Ehsan and MacLeod, Charles N. and Pierce, S. Gareth and Vithanage, Randika K. W. and Zimermann, Rastislav and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Gachagan, Anthony and Williams, Stewart and Ding, Jialuo (2023) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Allazadeh, Mohammad Reza (2023) Superplastic forming of 1050 aluminium alloy. In: World Congress on Materials Science Research and Nanotechnology, 2023-05-22 - 2023-05-23, Belstay Roma Aurelia.

Mohseni, E. and Pierce, S. G. and Vithanage, R. and Dobie, G. and MacLeod, C. N. and McKnight, S. and Foster, E. and Loukas, C. and McInnes, M. and Gover, H. and Burnham, K. and O'Brien-O'Reilly, J. and Paton, S. and Munro, G. and O'Hare, T. and Grosser, M. (2022) Multi-sensor electromagnetic inspection feasibility for aerospace composites surface defects. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Mohseni, Ehsan and Zimermann, Rastislav and Vithanage, Randika K. W. and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and MacDonald, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Gachagan, A. and Williams, Stewart and Ding, Jialuo (2022) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Vasantha, Gokula and Purves, David and Corney, Jonathan and Canavan, Michael and Quigley, John and Sherlock, Andrew (2022) Towards predictive design : tracking a CNC fixture design process to identify the requirements. In: 19th International Conference in Manufacturing Research ICMR 2022, 2022-09-06 - 2022-09-08.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and Macleod, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2022) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Javadi, Yashar and Hutchison, Alistair and Singh, Jonathan and Mohseni, Ehsan and Rahimi, Salah and Mehnen, Jorn and MacLeod, Charles Norman and Pierce, Gareth and Tant, Katherine Margaret Mary and Gachagan, Anthony (2022) Feasibility study of residual stress measurement using phased ‎array ultrasonic method. In: 11th International Conference on Residual Stress, 2022-03-27 - 2022-03-30, Centre Prouve.

Paquette, Arthur and Rahimi, Salah and Violatos, Ioannis and Langlois, Laurent and Dumont, Christian and Blaizot, Jérôme and Rosochowska, Malgorzata and Bigot, Régis (2021) On the evolution of microstructure and mechanical properties of type 316 austenitic stainless steel during ingot to billet conversion process. In: 24th International ESAFORM Conference on Material Forming, 2021-04-14 - 2021-04-16, Digital Event.

Pavlovic, Dejan and Tachtatzis, Christos and Hamilton, Andrew and Marko, Oskar and Atkinson, Robert and Davison, Christopher and Michie, Craig and Crnojevic, Vladimir and Andonovic, Ivan (2020) Classification of cattle behaviour using convolutional neural networks. In: European Federation of Animal Science (EAAP) Annual Meeting, 2020-12-01 - 2020-12-04, Online (due to Covid-19 pandemic).

Baker, Andrew and Allazadeh, Mohammad (2019) The Hole Expansion Test (HET) for DP600 and FV 607 : lambda calculation. In: NMIS summer internship studnet 2019, 2019-08-20 - 2019-08-20.

Mineo, Carmelo and MacLeod, Charles Norman and Su, Riliang and Lines, David and Davi', Santi and Cowan, Bruce and Pierce, Stephen and Paton, Scott and Munro, Gavin and McCubbin, Coreen and Watson, David and Kerr, William (2019) Robotic geometric and volumetric inspection of high value and large scale aircraft wings. In: 2019 IEEE International Workshop on Metrology for AeroSpace, 2019-06-19 - 2019-06-21.

Cochrane, Alex and Lander, James and Partridge, Ivana K. and Hallett, Stephen R. (2018) Evaluating Z-pin performance under high-velocity impact conditions. In: 7th Symposium on Aircraft Materials, 2018-04-24 - 2018-04-26, Universite de Technologie de Compiegne.

Liu, Z. and Wong, K. and Thimsuvan, T. and Turner, T. and Pickering, S. (2015) Effect of fibre length and suspension concentration on alignment quality of discontinuous recycled carbon fibre. In: 20th International Conference on Composite Materials, ICCM 2015, 2015-07-19 - 2015-07-24.

Escobar-Palafox, Gustavo A. and Wika, Krystian K. and Gault, Rosemary S. and Ridgway, Keith (2012) Characterisation of abrasive water-jet process for drilling titanium and carbon fibre reinforced polymer stacks. In: 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past - 2012, 2012-09-19 - 2012-09-22.

Escobar-Palafox, G.A. and Gault, R.S. and Ridgway, K. (2012) Characterisation of abrasive water-jet process for pocket milling in Inconel 718. In: 5th CIRP Conference on High Performance Cutting 2012, HPC 2012, 2012-06-04 - 2012-06-07.

Report

MacBryde, Jillian and Reckordt, Tim and Zante, Remi and Fernandez, Benoit (2021) The Impact of Covid on UK Manufacturing Firms and Supply Chains : [Stage 1 Report]. University of Strathclyde, Glasgow.

Ward, Michael and Allwood, Julian M. and Azevedo, Jose and Cleaver, Christopher and Cullen, Jonathan and Dunant, Cyrille and Fellin, Teppo and Hawkins, William and Horrocks, Ian and Horton, Phillipa and Ibell, Tim and Lin, Jianguo and Low, Hamish and Lupton, Rick and Murray, James and Clare, Adam and Salamati, Mohammad Reza and Cabrera Serrenho, Andre and Zhou, Wenbin (2019) Absolute Zero : Delivering the UK's climate Change Commitment with Incremental Changes to Today's Technologies. University of Cambridge, Cambridge.

Monograph

Sommer, Klaus-Dieter and Harris, Peter and Eichstädt, Sascha and Füssl, Roland and Dorst, Tanja and Schütze, Andreas and Heizmann, Michael and Schiering, Nadine and Maier, Andreas and Luo, Yuhui and Tachtatzis, Christos and Andonovic, Ivan and Gourlay, Gordon (2023) Modelling of networked measuring systems -- from white-box models to data based approaches. Other. arXiv.org, Ithaca, NY.