Investigation of chip formation mechanism in ultra-precision diamond turning of silk fibroin film

Wang, Zhengjian and Luo, Xichun and Sun, Jining and Seib, Philipp and Phuagkhaopong, Suttinee and Chang, Wenlong and Gao, Jian and Mir, Amir and Cox, Andrew (2022) Investigation of chip formation mechanism in ultra-precision diamond turning of silk fibroin film. Journal of Manufacturing Processes, 74. pp. 14-27. ISSN 1526-6125 (https://doi.org/10.1016/j.jmapro.2021.11.061)

[thumbnail of Wang-etal-JMP-2021-Investigation-of-chip-formation-mechanism-in-ultra-precision-diamond-turning-of-silk-fibroin-film]
Preview
 Text. Filename: Wang_etal_JMP_2021_Investigation_of_chip_formation_mechanism_in_ultra_precision_diamond_turning_of_silk_fibroin_film.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo
Download (1MB)| Preview

Abstract

The importance of silk fibroin particles (size from tens of nanometres to hundreds of microns) as effective drug carriers has been well identified due to their superior mechanical strength, biocompatibility and biodegradability. They are usually fabricated by methods that have difficulties in controlling the size and shape to meet the required functions. In addition, using chemical agents in the fabrication process may result in biological risks and degradation of the fibroin structures. In this study, ultra-precision diamond turning (UPDT) technology is researched as an alternative chemical-free manufacturing approach to generate silk particles in the form of cutting chips with controllable size and shape. The machinability in UPDT of silk fibroin film (hereinafter referred to as silk film) was discussed in terms of specific cutting force and chip morphology. The material removal in UPDT of silk film is taken place in the ductile regime. Experimental results reveal that a rise in the cutting speed could significantly reduce the specific cutting force, while decreasing the depth of cut (DOC) could increase the specific cutting force because of the size effect. Moreover, a sharp point tool using a less than 2.5 μm/rev feed rate is preferred to generate helical silk chips. The formation mechanism of shear bands and serrated chips in UPDT of silk film was investigated with the aid of a finite element and smoothed particle hydrodynamics (FE-SPH) hybrid numerical model with Cowper-Symonds (CS) material equation. The material parameters of silk film were determined for the first time at p = 7 and D = 1140 s-1. The simulated specific cutting force with this set of material parameters is 49.0% smaller than the measured one. The simulated chip morphology (e.g. shear band spacing) was also in good agreement with the measured values. The simulation study shows that the shear band formation is done via two joining parts: one part propagates from the cutting edge to the free surface, another part initiates on the free surface and evolves towards the cutting edge. The chip segment is formed by a microcrack propagating from the free surface to the cutting edge. The underlying mechanism of formation of the serrated chip is found to have its roots in the hierarchical structure of silk fibroin.

CORE (COnnecting REpositories)