Items where department is "Advanced Manufacturing and Materials"

Turner, T. D. and O'Shaughnessy, C. and He, X. and Levenstein, M. A. and Hunter, L. and Wojciechowski, J. and Bristowe, H. and Stone, R. and Wilson, C. C. and Florence, A. and Robertson, K. and Kapur, N. and Meldrum, F. C. (2024) Flow‐Xl : a new facility for the analysis of crystallization in flow systems. Journal of Applied Crystallography, 57 (5). pp. 1299-1310. ISSN 0021-8898

Walker, Joseph and Mills, Brandon and Javadi, Yashar and MacLeod, Charles and Sun, Yongle and Taraphdar, Pradeeptta Kumar and Ahmad, Bilal and Gurumurthy, Sundar and Ding, Jialuo and Sillars, Fiona (2024) Study of residual stress using phased array ultrasonics in Ti-6AL-4V wire-arc additively manufactured components. Sensors, 24 (19). 6372. ISSN 1424-8220

Cousins, Joseph R. L. and Bhadwal, Akhshay S. and Mottram, Nigel J. and Brown, Carl V. and Wilson, Stephen K. (2024) Flow manipulation of a nematic liquid crystal in a Hele-Shaw cell with an electrically-controlled viscous obstruction. Journal of Fluid Mechanics, 996. R1. ISSN 0022-1120

Cousins, Joseph R. L. and Mottram, Nigel J. and Wilson, Stephen K. (2024) Hele-Shaw flow of a nematic liquid crystal. Physical Review E, 110 (3). 034702. ISSN 2470-0053

Majerczak, Katarzyna and Liggat, John J. (2024) Evaluation of thermal properties and crystallinity in PHB-based systems - a DoE approach. Journal of Polymers and the Environment, 32 (9). pp. 4613-4632. ISSN 1572-8900

Wang, Bingquan and Oterkus, Selda and Oterkus, Erkan (2024) Closed-form wave dispersion relationships for ordinary state-based peridynamics. Journal of Peridynamics and Nonlocal Modeling, 6 (3). pp. 394-407. ISSN 2522-8978

Nicolson, Ewan and Lines, David and Mohseni, Ehsan and MacLeod, Charles Norman (2024) Single-bit reception with coded excitation for lightweight advanced ultrasonic imaging systems. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 71 (9). pp. 1120-1131.

Zhao, Taiyi and Zhang, Dayi and Watson, Robert and Jackson, William and MacLeod, Charles Norman and Mohseni, Ehsan and Dobie, Gordon (2024) Evaluation of pulse eddy current for autonomous airborne inspections. IEEE Sensors Letters, 8 (8). pp. 1-4. 6009304. ISSN 2475-1472

Zhao, Baixiang and Yan, Xiu-tian and Mehnen, Jörn (2024) A novel non-intrusive mental workload evaluation concept in human-robot collaboration. MATEC Web of Conferences, 401. 12002. ISSN 2261-236X

Valluvar Oli, Arivazhagan and Ivaturi, Aruna (2024) Indoor light harvesting perovskite solar cells on conducting oxide-free ultrathin deformable substrates. ACS Applied Energy Materials, 7 (15). pp. 6096-6104. ISSN 2574-0962

Mills, Brandon and Javadi, Yashar and Abad, Farhad and Lotfian, Saeid and MacLeod, Charles and Mehmanparast, Ali and Pierce, Gareth and Gachagan, Anthony (2024) Inspection of wind turbine bolted connections using the Ultrasonic Phased Array system. Heliyon, 10 (14). e34579. ISSN 2405-8440

Pickles, Thomas and Svoboda, Vaclav and Marziano, Ivan and Brown, Cameron J. and Florence, Alastair J. (2024) Integration of a model-driven workflow into an industrial pharmaceutical facility : supporting process development of API crystallisation. CrystEngComm, 26 (34). pp. 4678-4689. ISSN 1466-8033

MacPherson, Zoe and Gomes, José R. B. and Jorge, Miguel and Lue, Leo (2024) The dipole moment of supercritical water - local vs. mean-field polarisation contributions. Molecular Physics. pp. 1-13. e2381574. ISSN 0026-8976

Nicholson, Stefan and Bruckbauer, Jochen and Edwards, Paul and Trager-Cowan, Carol and Martin, Robert and Ivaturi, Aruna (2024) Unravelling the chloride dopant induced film improvement in all-inorganic perovskite absorbers. Journal of Materials Chemistry. A, 12 (37). pp. 25131-25139. ISSN 2050-7488

Enenche, Daniel E. and Davidson, Christine M. and Liggat, John J. (2024) Towards a consensus method for the isolation of mcroplastics from freshwater sediments. Environments, 11 (7). 146. ISSN 2076-3298

Gardiner, Alicia and Domingo-Roca, Roger and Windmill, James F. C. and Feeney, Andrew (2024) An adjustable acoustic metamaterial cell using a magnetic membrane for tunable resonance. Scientific Reports, 14 (1). 15044. ISSN 2045-2322

Li, Mingyang and Oterkus, Erkan and Oterkus, Selda (2024) A two-dimensional four-node quadrilateral inverse element for shape sensing and structural health monitoring. Mathematics and Mechanics of Solids, 29 (7). pp. 1364-1378. ISSN 1081-2865

Tzaferis, Konstantinos and Dobie, Gordon and Lines, Dave and MacLeod, Charles (2024) A technique for medium-range through-thickness focusing using Lamb waves. NDT and E International, 145. 103085. ISSN 0963-8695

Nicolson, Ewan and Mohseni, Ehsan and Lines, David and Tant, Katherine M.M. and Pierce, Gareth and MacLeod, Charles N. (2024) Towards an in-process ultrasonic phased array inspection method for narrow-gap welds. NDT and E International, 144. 103074. ISSN 0963-8695

Tunukovic, Vedran and McKnight, Shaun and Mohseni, Ehsan and Pierce, S. Gareth and Pyle, Richard and Duernberger, Euan and Loukas, Charalampos and Vithanage, Randika K.W. and Lines, David and Dobie, Gordon and MacLeod, Charles N. and Cochran, Sandy and O'Hare, Tom (2024) A study of machine learning object detection performance for phased array ultrasonic testing of carbon fibre reinforced plastics. NDT and E International, 144. 103094. ISSN 0963-8695

Bhadwal, Akhshay S. and Cousins, Joseph R. L. and Mottram, Nigel J. and Wilson, Stephen K. and Duffy, Brian R. and Sage, Ian C. and Brown, Carl V. (2024) Active control of the free surface of a rivulet of a nematic liquid crystal with an electric field. Physical Review Fluids, 9 (6). 064002. ISSN 2469-990X

Latham, Brendan and Reid, Andrew and Jackson-Camargo, Joseph C. and Williams, Jonathan A. and Windmill, James F. C. (2024) Coupled membranes : a mechanism of frequency filtering and transmission in the field cricket ear evidenced by micro-computed tomography, laser Doppler vibrometry, and finite element analysis. Journal of the Royal Society Interface, 21 (215). 20230779. ISSN 1742-5689

Reddygunta, Kiran Kumar Reddy and Šiller, Lidija and Ivaturi, Aruna (2024) Sheet-like ZnCo2O4 microspheres and pomelo peel waste-derived activated carbon for high performance solid state asymmetric supercapacitors. Sustainable Energy and Fuels, 8 (12). pp. 2751-2761.

McCready, Connaire and Sladekova, Kristina and Conroy, Stuart and Gomes, José R. B. and Fletcher, Ashleigh J. and Jorge, Miguel (2024) Quantifying the uncertainty of force field selection on adsorption predictions in MOFs. Journal of Chemical Theory and Computation, 20 (11). pp. 4869-4884. ISSN 1549-9618

Grunshaw, Thomas and Wood, Susanna H. and Sproules, Stephen and Parrott, Andrew and Nordon, Alison and Shapland, Peter D. P. and Wheelhouse, Katherine M. P. and Tomkinson, Nicholas C. O. (2024) A mechanistic investigation of the N-hydroxyphthalimide catalyzed benzylic oxidation mediated by sodium chlorite. Journal of Organic Chemistry, 89 (11). pp. 7933-7945. ISSN 0022-3263

Arnaoutakis, Georgios E. and Busko, Dmitry and Richards, Bryce S. and Ivaturi, Aruna and Gordon, Jeffrey M. and Katz, Eugene A. (2024) Ultra-broadband near-infrared upconversion for solar energy harvesting. Solar Energy Materials and Solar Cells, 269. 112783. ISSN 0927-0248

Tunukovic, Vedran and McKnight, Shaun and Pyle, Richard and Wang, Zhiming and Mohseni, Ehsan and Pierce, S. Gareth and Vithanage, Randika K. W. and Dobie, Gordon and MacLeod, Charles N. and Cochran, Sandy and O'Hare, Tom (2024) Unsupervised machine learning for flaw detection in automated ultrasonic testing of carbon fibre reinforced plastic composites. Ultrasonics, 140. 107313. ISSN 0041-624X

Johnston-Lynch, Katharina and Whitfield, Ian and Evans, Dorothy (2024) Systems thinking towards holistic, sustainability-oriented assessment and decision-making for lightweighting. Procedings of the Design Society, 4. pp. 1319-1328. ISSN 2732-527X

Hicks, Calum and Tamimi, Saeed and Sivaswamy, Giribaskar and Pimentel, Misael and Mckegney, Scott and Fitzpatrick, Stephen (2024) Hybrid manufacturing approach for landing gear applications : WAAM Ti–6Al–4V on forged Ti–5Al–5Mo–5V–3Cr. Journal of Materials Research and Technology, 30. pp. 6596-6608. ISSN 2238-7854

Reddygunta, Kiran Kumar Reddy and Šiller, Lidija and Ivaturi, Aruna (2024) Screen-printed stretchable supercapacitors based on tin sulfide-decorated face-mask-derived activated carbon electrodes with high areal energy density. ACS Applied Energy Materials, 7 (9). pp. 3558-3576. ISSN 2574-0962

DASH, Smrutiranjan and Bag, Subhendu Sekhar and Golder, Animes Kumar and Ivaturi, Aruna (2024) Ultrasensitive electrochemical sensors based on Cu and Cu@Ag nanorods for simultaneous heavy metal detection. Materials Chemistry and Physics, 318. 129255. ISSN 1879-3312

Zhang, Tao and Oterkus, Selda and Oterkus, Erkan and Hu, Jiajun and Wang, Xueliang and Wang, Fang (2024) A simulation-based and data-augmented shear force inversion method for offshore platform connector. Marine Structures, 95. 103577. ISSN 0951-8339

Reddygunta, Kiran Kumar Reddy and Callander, Andrew and Šiller, Lidija and Faulds, Karen and Berlouis, Leonard and Ivaturi, Aruna (2024) Scalable slot-die coated flexible supercapacitors from upcycled PET face shields. RSC Advances, 14 (18). pp. 12781-12795. ISSN 2046-2069

Zhang, Dayi and Jackson, William and Dobie, Gordon and MacLeod, Charles and Gachagan, Anthony (2024) Innovative non-invasive ultrasound method for whisky cask liquid level measurement. Measurement, 228. 114345. ISSN 1873-412X

Paterson, Leigh and Miscandlon, Jill and Butler, David (2024) The juxtaposition of our future electrification solutions : a view into the unsustainable life cycle of a permanent magnet electrical machine. Sustainability, 16 (7). 2681. ISSN 2071-1050

Uflewska, Olga and Wong, T.C. and Ward, Michael (2024) Capability management of manufacturing research centres : challenges and opportunities. International Journal of Manufacturing Technology and Management, 38 (2). pp. 143-171. ISSN 1741-5195

McArthur, Stig and Mehnen, Jörn and Yokan, Catherine and Bomphray, Iain (2024) An overview of current research in automated fibre placement defect rework. Procedia Computer Science, 232. pp. 2167-2180.

Brown, Cameron J. and McGinty, John and Islam, Muhammad T. and Rajoub, Nazer and Arjmandi-Tash, Omid and Ottoboni, Sara and Shahid, Muhid and Urwin, Stephanie J. and Lee, Ye Seol and Chong, Magdalene W. S. and Papathanasiou, Foteini and Prakash, Aruna S. and Prasad, Elke and Spence, Bronwyn and Sefcik, Jan and Robertson, John and Smith, Rachel and Litster, James D. and Price, Chris J. and Nordon, Alison and Adjiman, Claire S. and Florence, Alastair J. (2024) Integrated continuous process design for crystallisation, spherical agglomeration, and filtration of lovastatin. Journal of Pharmaceutical Innovation, 19 (2). 9. ISSN 1939-8042

McKnight, Shaun and MacKinnon, Christopher and Pierce, S. Gareth and Mohseni, Ehsan and Tunukovic, Vedran and MacLeod, Charles N. and Vithanage, Randika K. W. and O'Hare, Tom (2024) Three-dimensional residual neural architecture search for ultrasonic defect detection. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 71 (3). pp. 423-436. ISSN 0885-3010

Javadi, Yashar and Mills, Brandon and MacLeod, Charles and Lines, David and Abad, Farhad and Lotfian, Saeid and Mehmanparast, Ali and Pierce, Gareth and Brennan, Feargal and Gachagan, Anthony and Mineo, Carmelo (2024) Phased array ultrasonic method for robotic preload measurement in offshore wind turbine bolted connections. Sensors, 24 (5). 1421. ISSN 1424-8220

Chen, Bingzhang and Grinfeld, Michael (2024) Decomposing diversity into measures of evenness, similarity, and richness. Ecology and Evolution, 14 (2). e10952. ISSN 2045-7758

Pickles, Thomas and Mustoe, Chantal and Brown, Cameron J. and Florence, Alastair J. (2024) Comparative study on adaptive Bayesian optimization for batch cooling crystallization for slow and fast kinetic regimes. Crystal Growth and Design, 24 (3). pp. 1245-1253. ISSN 1528-7483

Wang, Hanlin and Tanaka, Satoyuki and Oterkus, Selda and Oterkus, Erkan (2024) Fracture mechanics investigation for 2D orthotropic materials by using ordinary state-based peridynamics. Composite Structures, 329. 117757. ISSN 0263-8223

Galadima, Yakubu Kasimu and Oterkus, Selda and Oterkus, Erkan and Amin, Islam and El-Aassar, Abdel-Hameed and Shawky, Hosam (2024) Modelling of viscoelastic materials using non-ordinary state-based peridynamics. Engineering with Computers, 40 (1). pp. 527-540. ISSN 0177-0667

McKnight, Shaun and Pierce, S. Gareth and Mohseni, Ehsan and MacKinnon, Christopher and MacLeod, Charles and O'Hare, Tom and Loukas, Charalampos (2024) A comparison of methods for generating synthetic training data for domain adaption of deep learning models in ultrasonic non-destructive evaluation. NDT and E International, 141. 102978. ISSN 0963-8695

Pickles, Thomas and Mustoe, Chantal and Boyle, Christopher and Cardona, Javier and Brown, Cameron J. and Florence, Alastair J. (2024) Developing a model-driven workflow for the digital design of small-scale batch cooling crystallisation with the antiviral lamivudine. CrystEngComm, 26 (6). pp. 822-834. ISSN 1466-8033

Galadima, Yakubu Kasimu and Oterkus, Selda and Oterkus, Erkan and Amin, Islam and El-Aassar, Abdel-Hameed and Shawky, Hosam (2024) Effect of phase contrast and inclusion shape on the effective response of viscoelastic composites using peridynamic computational homogenization theory. Mechanics of Advanced Materials and Structures, 31 (1). pp. 155-163. ISSN 1537-6532

Davis, Geo and Stratoudaki, Theodosia and Lukacs, Peter and Riding, Matthew W. and Al Fuwaires, Ahmed and Kamintzis, Panagiotis and Pieris, Don and Keenan, Alan and Wilcox, Paul and Pierce, Gareth and MacLeod, Charles and Williams, Stewart (2023) Near-surface defect detection in additively manufactured components using laser induced phased arrays with surface acoustic wave crosstalk suppression. Materials and Design, 236. 112453. ISSN 0261-3069

Enang, Etieno and Sminia, Harry and Gherardi, Silvia and Zhang, Ying (2023) Unpacking researchers' embodied sensemaking : a diffractive reading-writing of Mann Gulch disaster. Scandinavian Journal of Management, 39 (4). 101299. ISSN 0956-5221

Reddygunta, Kiran Kumar Reddy and Beresford, Rachael and Šiller, Lidija and Berlouis, Leonard and Ivaturi, Aruna (2023) Activated carbon utilization from corn derivatives for high energy density flexible supercapacitors. Energy and Fuels, 37 (23). pp. 19248-19265. ISSN 0887-0624

Li, Mingyang and Oterkus, Erkan and Oterkus, Selda (2023) A two-dimensional inverse crack tip element for shape sensing and structural health monitoring. Ocean Engineering, 289 (Pt. 1). 116287. ISSN 0029-8018

Zimermann, Rastislav and Mohseni, Ehsan and Foster, Euan A. and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K.W. and Macleod, Charles N. and Lines, David and Silva, Misael Pimentel Espirindio E. and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Rizwan, Muhammad Khalid and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of metal additive manufactured components at build using ultrasound and eddy-current approaches. Journal of Manufacturing Processes, 107. pp. 549-558. ISSN 1526-6125

Leonidas, Emilios and Hobbs, Matthew J. and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fisk, Callum and Fitzpatrick, Stephen and Willmott, Jon R. (2023) InAsSb photodiode fibre otic thermometry for high-speed, near-ambient temperature measurements. Sensors, 23 (23). 9514. ISSN 1424-8220

McFarlan, Catriona and Nordon, Alison and Sarsfield, Mark and Taylor, Robin and Chen, Hongyan (2023) Comparison of Raman and mid-infrared spectroscopy for quantification of nitric acid in PUREX-relevant mixtures. Progress in Nuclear Energy, 165. 104898. ISSN 0149-1970

Yang, Zhenghao and Oterkus, Erkan and Oterkus, Selda and Ma, Chien-Ching (2023) Double horizon peridynamics. Mathematics and Mechanics of Solids, 28 (11). pp. 2531-2549. ISSN 1081-2865

Ogoh-Orch, Blessing and Keating, Patricia and Ivaturi, Aruna (2023) Visible light active BiOI/TiO2 heterojunction photocatalyst for remediation of crude oil contaminated water. ACS Omega, 8 (46). pp. 43556-43572. ISSN 2470-1343

Rutherford, Samantha H. and Hutchison, Christopher D.M. and Greetham, Gregory M. and Parker, Anthony W. and Nordon, Alison and Baker, Matthew J. and Hunt, Neil T. (2023) Optical screening and classification of drug-binding to proteins in human blood serum. Analytical Chemistry, 95 (46). pp. 17037-17045. ISSN 0003-2700

Robertson, David J. and Malin, Johanna and Martin, Sophie and Butler, Stephen H. and John, Bev and Graff, Martin and Flowers, Paul and Jones, Benedict C. (2023) Social media use : attitudes, ‘detox’, and craving in typical and frequent users. Technology, Mind, and Behavior. ISSN 2689-0208 (In Press)

Zhang, Yiheng and Wang, Qing and Oterkus, Selda and Oterkus, Erkan and Li, Jiabao and Han, Duanfeng (2023) Numerical investigation of ice plate fractures upon rigid ball impact. Ocean Engineering, 287 (Part 1). 115824. ISSN 0029-8018

Pooripanyakun, Munyaporn and Wodehouse, Andrew and Mehnen, Jorn (2023) The role of interface configuration on performance accuracy in eyes-free touchscreen interaction. Universal Access in the Information Society. ISSN 1615-5289

Prasad, Elke and Robertson, John and Florence, Alastair J. and Halbert, Gavin W. (2023) Expanding the pharmaceutical formulation space in material extrusion 3D printing applications. Additive Manufacturing, 77. 103803. ISSN 2214-8604

Ogbeifun, Achoyamen and Oterkus, Selda and Race, Julia and Naik, Harit and Moorthy, Dakshina and Bhowmik, Subrata and Ingram, Julie (2023) Simulation stage-based seabed pre-trenching technique for steel catenary riser touchdown fatigue analysis. Ships and Offshore Structures, 18 (10). pp. 1380-1396. ISSN 1754-212X

Zhou, Luming and Zhu, Zhende and Oterkus, Erkan and Oterkus, Selda and Xu, Huicong (2023) Research on the effects of heating and cooling processes on the mechanical properties of yellow rust granite. Geohazard Mechanics, 1 (3). pp. 231-243. ISSN 2949-7418

Galadima, Yakubu Kasimu and Oterkus, Selda and Oterkus, Erkan and Amin, Islam and El-Aassar, Abdel-Hameed and Shawky, Hosam (2023) A nonlocal method to compute effective properties of viscoelastic composite materials based on peridynamic computational homogenization theory. Composite Structures, 319. 117147. ISSN 0263-8223

Lewandowski, Karol and Barbera, Daniele and Blackwell, Paul and Roohi, Amir H. and Athanasiadis, Ignatios and McBride, Andrew and Steinmann, Paul and Pearce, Chris and Kaczmarczyk, Łukasz (2023) Multifield finite strain plasticity : theory and numerics. Computer Methods in Applied Mechanics and Engineering, 414. 116101. ISSN 0045-7825

Yang, Zhenghao and Ma, Chien-Ching and Oterkus, Erkan and Oterkus, Selda and Naumenko, Konstantin (2023) Analytical solution of 1-dimensional peridynamic equation of motion. Journal of Peridynamics and Nonlocal Modeling, 5. 356–374. ISSN 2522-8978

Urwin, Stephanie J. and Chong, Magdalene W.S. and Li, Wei and McGinty, John and Mehta, Bhavik and Ottoboni, Sara and Pathan, Momina and Prasad, Elke and Robertson, Murray and McGowan, Mark and al-Attili, Mais and Gramadnikova, Ekaterina and Siddique, Mariam and Houson, Ian and Feilden, Helen and Benyahia, Brahim and Brown, Cameron J. and Halbert, Gavin W. and Johnston, Blair and Nordon, Alison and Price, Chris J. and Reilly, Chris D. and Sefcik, Jan and Florence, Alastair J. (2023) Digital process design to define and deliver pharmaceutical particle attributes. Chemical Engineering Research and Design, 196. pp. 726-749. ISSN 0263-8762

Harris, R.S. and Ijomah, W.L. and Windmill, J. (2023) Evaluation and validation of Damage Assessment Tracking Criteria models within the sector of UK automotive remanufacturing. Journal of Cleaner Production, 414. 137494. ISSN 0959-6526

McKinlay, Rebecca A. and Wray, Alexander W. and Wilson, Stephen K. (2023) Late-time draining of a thin liquid film on the outer surface of a circular cylinder. Physical Review Fluids, 8 (8). 084001. ISSN 2469-990X

Peters, Sean and Andreu, Aurik and Perez, Marcos and Blackwell, Paul (2023) Improving forging outcomes of cast titanium aluminide alloy via cyclic induction heat treatment. Metals, 13 (8). 1420. ISSN 2075-4701

Barrera, Maria Cecilia and Cree, Jordan and Gomes, José R. B. and Jorge, Miguel (2023) Polarization-consistent force field for ketones. Journal of Molecular Liquids, 383. 122070. ISSN 0167-7322

Foster, Euan A. and Sweeney, Nina E. and Nicolson, Ewan and Singh, Jonathan and Rizwan, Muhammad K. and Lines, David and Pierce, Gareth and Mohseni, Ehsan and Gachagan, Anthony and Tant, Katherine M.M. and MacLeod, Charles N. (2023) Thermal compensation of ultrasonic transmit and receive data for steel welded plates at the point of manufacture. NDT and E International, 137. 102812. ISSN 0963-8695

Sweeney, Nina E. and Parke, Simon and Lines, David and Loukas, Charalampos and Vasilev, Momchil and Pierce, Stephen G. and MacLeod, Charles N. (2023) In-process phased array ultrasonic weld pool monitoring. NDT and E International, 137. 102850. ISSN 0963-8695

Zhang, Dayi and Subramanian, Senthilkumar and Hampson, Rory and Jackson, William and Kontis, Konstantinos and Dobie, Gordon and MacLeod, Charles (2023) Automotive aerodynamics sensing using low-profile pressure sensor strip. IEEE Transactions on Instrumentation and Measurement, 72. pp. 1-9. 2005809. ISSN 0018-9456

Murphy, Keir N. and Naftaly, Mira and Nordon, Alison and Markl, Daniel (2023) Effect of particle size and concentration on low-frequency terahertz scattering in granular compacts. Optical Materials Express, 13 (8). pp. 2251-2263. ISSN 2159-3930

Peters, Sean and Perez, Marcos and Blackwell, Paul (2023) Integrating HIP and homogenisation heat treatment and its effect on the workability of a conventional peritectic TiAl alloy. Intermetallics, 158. 107884. ISSN 0966-9795

Preedakorn, Kantapich and Butler, David and Mehnen, Jörn (2023) Challenges for the adoption of electric vehicles in Thailand : potential impacts, barriers, and public policy. Sustainability, 15 (12). 9470. ISSN 2071-1050

Chong, Magdalene W. S. and Parrott, Andrew J. and Ashworth, David J. and Fletcher, Ashleigh J. and Nordon, Alison (2023) Non-invasive monitoring of the growth of metal–organic frameworks (MOFs) via Raman spectroscopy. Physical Chemistry Chemical Physics, 25 (21). pp. 14869-14878. ISSN 1463-9084

El-Aassar, Abdel-Hameed M. and Hussien, Rasha A. and Mohamed, Faten A. and Oterkus, Selda and Oterkus, Erkan (2023) Appraisal of surface-groundwater anthropogenic indicators and associated human health risk in El Sharqia Governorate, Egypt. Journal of Water and Health, 21 (6). 719–739. ISSN 1477-8920

Pereira Diaz, Laura and Brown, Cameron J. and Ojo, Ebenezer and Mustoe, Chantal and Florence, Alastair J. (2023) Machine learning approaches to the prediction of powder flow behaviour of pharmaceutical materials from physical properties. Digital Discovery, 2 (3). pp. 692-701. ISSN 2635-098X

Oterkus, Selda and Oterkus, Erkan (2023) Peridynamic surface elasticity formulation based on modified core-shell model. Journal of Peridynamics and Nonlocal Modeling, 5 (2). pp. 229-240. ISSN 2522-8978

Nguyen, Cong Tien and Oterkus, Selda and Oterkus, Erkan (2023) A peridynamic based machine learning model for one-dimensional and two-dimensional structures. Continuum Mechanics and Thermodynamics, 35 (3). pp. 741-773. ISSN 0935-1175

El-Aassar, Abdel-Hameed and Hagagg, Kamilia and Hussien, Rasha and Oterkus, Selda and Oterkus, Erkan (2023) Integration of groundwater vulnerability with contaminants transport modeling in unsaturated zone, case study El-Sharqia, Egypt. Environmental Monitoring and Assessment, 195 (6). 722. ISSN 0167-6369

Gilmour, Adam and Jackson, William and Zhang, Dayi and Dobie, Gordon and MacLeod, Charles N. and Karkera, Benjamin and Barber, Thomas (2023) Robotic positioning for quality assurance of feature-sparse components using a depth-sensing camera. IEEE Sensors Journal, 23 (9). pp. 10032-10040. ISSN 1530-437X

Stavert, Tom and Patwardhan, Siddharth V. and Pilling, Robert and Jorge, Miguel (2023) Unlocking the holy grail of sustainable and scalable mesoporous silica using computational modelling. RSC Sustainability, 1 (3). pp. 432-438.

Trushkevych, O. and Dixon, S. and Tabatabaeipour, M. and Potter, M.D.G. and MacLeod, C. and Dobie, G. and Edwards, R.S. (2023) Calibration-free SH guided wave analysis for screening of wall thickness in steel with varying properties. NDT and E International, 135. 102789. ISSN 0963-8695

Tzaferis, Konstantinos and Tabatabaeipour, Morteza and Dobie, Gordon and Lines, David and MacLeod, Charles N. (2023) Single mode Lamb wave excitation at high frequency thickness products using a conventional linear array transducer. Ultrasonics, 130. 106917. ISSN 0041-624X

Loukas, Charalampos and Vasilev, Momchil and Zimermann, Rastislav and Vithanage, Randika K. W. and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo and Burnham, Kenneth and Sibson, Jim and O'Hare, Tom and Grosser, Michael R. (2023) Transforming industrial manipulators via kinesthetic guidance for automated inspection of complex geometries. Sensors, 23 (7). 3757. ISSN 1424-8220

Duernberger, Euan and MacLeod, Charles Norman and Lines, Dave (2023) Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocity. Composites Part B: Engineering, 254. 110577. ISSN 1359-8368

Li, Mingyang and Dirik, Yildirim and Oterkus, Erkan and Oterkus, Selda (2023) Shape sensing of NREL 5 MW offshore wind turbine blade using iFEM methodology. Ocean Engineering, 273. 114036. ISSN 0029-8018

Vassileiou, Antony D. and Robertson, Murray N. and Wareham, Bruce G. and Soundaranathan, Mithushan and Ottoboni, Sara and Florence, Alastair J. and Hartwig, Thoralf and Johnston, Blair F. (2023) A unified ML framework for solubility prediction across organic solvents. Digital Discovery, 2 (2). pp. 356-367. ISSN 2635-098X

Jorge, Miguel and Barrera, Maria Cecilia and Milne, Andrew W. and Ringrose, Chris and Cole, Daniel J. (2023) What is the optimal dipole moment for non-polarizable models of liquids? Journal of Chemical Theory and Computation, 19 (6). pp. 1790-1804. ISSN 1549-9618

Cousins, Joseph R. L. and Bhadwal, Akhshay S. and Corson, Lindsey T. and Duffy, Brian R. and Sage, Ian C. and Brown, Carl V. and Mottram, Nigel J. and Wilson, Stephen K. (2023) Weak-anchoring effects in a thin pinned ridge of nematic liquid crystal. Physical Review E, 107 (3). 034702. ISSN 2470-0053

Gandhi, Mano Balaji and Valluvar Oli, Arivazhagan and Nicholson, Stefan and Adelt, Milan and Martin, Robert and Chen, Yu and Sridharan, Moorthy Babu and Ivaturi, Aruna (2023) Investigation on guanidinium bromide incorporation in methylammonium lead iodide for enhanced efficiency and stability of perovskite solar cells. Solar Energy, 253. pp. 1-8. ISSN 0038-092X

Grech, Amy and Mehnen, Jörn and Wodehouse, Andrew (2023) An extended AI-experience : Industry 5.0 in creative product innovation. Sensors, 23 (6). 3009. ISSN 1424-8220

Muir, Kellie and Liggat, John J and O'Keeffe, Luke (2023) Thermal volatilisation analysis of graphite intercalation compound fire retardants. Journal of Thermal Analysis and Calorimetry, 148 (5). pp. 1905-1920.

Patel, Divya and Perez-Sanchez, Germán and Jorge, Miguel and Ray, Debes and Aswal, Vinod K. and Kuperkar, Ketan and Coutinho, João A. P. and Bahadur, Pratap (2023) Rationalizing the design of pluronics-surfactant mixed micelles through molecular simulations and experiments. Langmuir, 39 (7). 2692–2709. ISSN 0743-7463

Paton, Steve and Ates, Aylin and Sminia, Harry and Smith, Marisa (2023) Making sense of high value manufacturing : relating policy and theory. Production Planning and Control, 34 (4). pp. 359-370. ISSN 0953-7287

Nicolson, Ewan and Mohseni, Ehsan and Sumana and Lines, David and Pierce, Gareth and MacLeod, Charles N. (2023) Dual-tandem phased array method for imaging of near-vertical defects in narrow-gap welds. NDT and E International, 135. 102808. ISSN 0963-8695

Galadima, Yakubu Kasimu and Xia, Wenxuan and Oterkus, Erkan and Oterkus, Selda (2023) A computational homogenization framework for non-ordinary state-based peridynamics. Engineering with Computers, 39 (1). pp. 461-487. ISSN 0177-0667

Ozdemir, M. and Oterkus, S. and Oterkus, E. and Amin, I. and Nguyen, C.T. and Tanaka, S. and El-Aassar, A. and Shawky, H. (2023) Evaluation of dynamic behaviour of porous media including micro-cracks by ordinary state-based peridynamics. Journal of Engineering with Computers, 39 (1). pp. 61-79. ISSN 0177-0667

Wilson, Stephen K. and D'Ambrosio, Hannah-May (2023) Evaporation of sessile droplets. Annual Review of Fluid Mechanics, 55 (1). pp. 481-509. ISSN 1545-4479

Remani, Jijo Prasad Jayaprasad and Palanisamy, Saravanakumar and Nallathambi, Ashok Kumar and Oterkus, Selda and Juhre, Daniel and Specht, Eckehard (2023) Peridynamic simulation of heat transfer during quenching of semi-solid plate with occurrence of hot cracks. Journal of Thermal Stresses, 46 (12). pp. 1372-1395. ISSN 0149-5739

Chong, Magdalene W. S. and Ottoboni, Sara and Martin, Alan R. G. and Bowering, Deborah and Price, Chris J. and Nordon, Alison and Oswald, Iain D. H. and Ward, Martin R. (2022) Crystal structure of a copper-mefenamate complex solvated with diglyme and water. Acta Crystallographica Section E: Structure Reports, 78 (Part 1). ISSN 1600-5368

Loukas, Charalampos and Warner, Veronica and Jones, Richard and MacLeod, Charles N. and Vasilev, Momchil and Mohseni, Ehsan and Dobie, Gordon and Sibson, Jim and Pierce, Stephen G. and Gachagan, Anthony (2022) A sensor enabled robotic strategy for automated defect-free multi-pass high-integrity welding. Materials and Design, 224. 111424. ISSN 0261-3069

Mishra, Puneet and Passos, Dário and Marini, Federico and Xu, Junli and Amigo, José M. and Gowen, Aoife A. and Jansen, Jeroen J. and Biancolillo, Alessandra and Roger, Jean Michel and Rutledge, Douglas N. and Nordon, Alison (2022) Deep learning for near-infrared spectral data modelling : hypes and benefits. Trends in Analytical Chemistry, 157. 116804. ISSN 0165-9936

Tuni, Andrea and Rentizelas, Athanasios (2022) Improving environmental sustainability in agri-food supply chains : evidence from an eco-intensity-based method application. Cleaner Logistics and Supply Chain, 5. 100081. ISSN 2772-3909

Yang, Zhenghao and Naumenko, Konstantin and Altenbach, Holm and Ma, Chien-Ching and Oterkus, Erkan and Oterkus, Selda (2022) Beam buckling analysis in peridynamic framework. Archive of Applied Mechanics, 92. 3503–3514. ISSN 0939-1533

Bordonhos, Marta and Galvão, Tiago L. P. and Gomes, José R.B. and Gouveia, José D. and Jorge, Miguel and Lourenço, Mirtha and Pereira, José M. and Pérez-Sánchez, Germán and Pinto, Moisés L. and Silva, Carlos M. and Tedim, João and Zêzere, Bruno (2022) Multiscale computational approaches towards the understanding of materials. Advanced Theory and Simulations, 6 (10). 2200628. ISSN 2513-0390

Rashed, Hamad S. and Parrott, Andrew J. and Nordon, Alison and Baker, Matthew J. and Palmer, David S. (2022) Pocket-size near-IR spectrometers for rapid examination of contaminated textile fibres at the crime-scene. Vibrational Spectroscopy, 123. 103464. ISSN 0924-2031

Paladino, Eleonora and Doerr, Frederik J.S. and Bordos, Ecaterina and Onyemelukwe, Iyke I. and Lamprou, Dimitrios A. and Florence, Alastair J. and Gilmore, Ian S. and Halbert, Gavin W. (2022) High spatial resolution ToF-SIMS imaging and image analysis strategies to monitor and quantify early phase separation in amorphous solid dispersions. International Journal of Pharmaceutics, 628. 122191. ISSN 1873-3476

Rutherford, Samantha H. and Greetham, Gregory M. and Parker, Anthony W. and Nordon, Alison and Baker, Matthew J. and Hunt, Neil T. (2022) Measuring proteins in H2O using 2D-IR spectroscopy : pre-processing steps and applications toward a protein library. Journal of Chemical Physics, 157 (20). 205102. ISSN 0021-9606

Brisco, Ross and Whitfield, Robert Ian and Grierson, Hilary (2022) Online course design using iterative workshops on computer-supported collaborative design for engineering design students. Design and Technology Education: An International Journal, 27 (3). pp. 8-35. ISSN 1360-1431

Chong, Magdalene W.S. and McGlone, Thomas and Chai, Ching Yee and Briggs, Naomi E. B. and Brown, Cameron J. and Perciballi, Francesca and Dunn, Jaclyn and Parrott, Andrew J. and Dallin, Paul and Andrews, John and Nordon, Alison and Florence, Alastair J. (2022) Temperature correction of spectra to improve solute concentration monitoring by in situ ultraviolet and mid-infrared spectrometries towards isothermal local model performance. Organic Process Research and Development, 26 (11). pp. 3096-3105. ISSN 1083-6160

Valluvar Oli, Arivazhagan and Li, Zinuo and Chen, Yu and Ivaturi, Aruna (2022) Near-ultraviolet indoor black light-harvesting perovskite solar cells. ACS Applied Energy Materials, 5 (12). pp. 14669-14679. ISSN 2574-0962

Pickles, Thomas and Mustoe, Chantal and Brown, Cameron and Florence, Alastair (2022) Autonomous DataFactory : high-throughput screening for large-scale data collection to inform medicine manufacture. British Journal of Pharmacy, 7 (2). ISSN 2058-8356

Rotariu, Traian and Pulpea, Daniela and Toader, Gabriela and Rusen, Edina and Diacon, Aurel and Neculae, Valentina and Liggat, John (2022) Peelable nanocomposite coatings : "eco-friendly" tools for the safe removal of radiopharmaceutical spills or accidental contamination of surfaces in general-purpose radioisotope laboratories. Pharmaceutics, 14 (11). 2360. ISSN 1999-4923

Yang, Zhenghao and Naumenko, Konstantin and Ma, Chien-Ching and Altenbach, Holm and Oterkus, Erkan and Oterkus, Selda (2022) Some closed form series solutions to peridynamic plate equations. Mechanics Research Communications, 126. 104000. ISSN 1873-3972

Foster, Euan A. and Bernard, Robert and Bolton, Gary and Jackson-Camargo, Joseph C. and Gachagan, Anthony and Mohseni, Ehsan and MacLeod, Charles N. (2022) Inspection of nuclear assets with limited access using feature guided waves. NDT and E International, 131. 102695. ISSN 0963-8695

McKendry, Daniel A. and Whitfield, Robert I. (2022) Process considerations for Product Lifecycle Management implementation for high value Engineering to Order programmes. Design Science, 8. e25. ISSN 2053-4701

Reddygunta, Kiran Kumar Reddy and Callander, Andrew and Šiller, Lidija and Faulds, Karen and Berlouis, Leonard and Ivaturi, Aruna (2022) Sono-exfoliated graphene-like activated carbon from hazelnut shells for flexible supercapacitors. International Journal of Energy Research, 46 (12). pp. 16512-16537. ISSN 0363-907X

Yang, Zhenghao and Ma, Chien-Ching and Oterkus, Erkan and Oterkus, Selda and Naumenko, Konstantin and Vazic, Bozo (2022) Analytical solution of the peridynamic equation of motion for a 2-dimensional rectangular membrane. Journal of Peridynamics and Nonlocal Modeling. ISSN 2522-8978

Watson, Robert and Kamel, Mina and Zhang, Dayi and Dobie, Gordon and MacLeod, Charles and Pierce, S. Gareth and Nieto, Juan (2022) Dry coupled ultrasonic non-destructive evaluation using an over-actuated unmanned aerial vehicle. IEEE Transactions on Automation Science and Engineering, 19 (4). pp. 2874-2889. ISSN 1545-5955

Yang, Zhenghao and Naumenko, Konstantin and Altenbach, Holm and Ma, Chien-Ching and Oterkus, Erkan and Oterkus, Selda (2022) Some analytical solutions to peridynamic beam equations. Zeitschrift fur Angewandte Mathematik und Mechanik, 102 (10). e202200132. ISSN 0044-2267

Jarusarunchai, Artit and Valluvar Oli, Arivazhagan and Ivaturi, Aruna and Robertson, Neil (2022) Cost-effective dyes based on low-cost donors and Pd-free synthesis for dye-sensitized solar cells. Solar RRL, 6 (9). 2200375. ISSN 2367-198X

McCreath, S. and Boinard, P. and Boinard, E. and Gritter, P. and Liggat, J.J. (2022) High clarity polyurethane laminating adhesives based on poly (propylene glycol). Effect of hard segment on microphase morphology, haze and adhesion. International Journal of Adhesion and Adhesives, 117 (Part A). 103168. ISSN 0143-7496

Print, Lewis J. and Liggat, John J. and Moug, Stan and Seaton, Helen and Apperley, David C. (2022) A study of the ceramicisation of allylhydridopolycarbosilane by thermal volatilisation analysis and solid-state nuclear magnetic resonance. Silicon, 15 (3). pp. 1355-1379. ISSN 1876-990X

McLean, Caitlin and Brown, Kelly and Windmill, James and Dennany, Lynn (2022) Innovations in point-of-care electrochemical detection of Pyocyanin. Journal of Electroanalytical Chemistry, 921. 116649. ISSN 0022-0728

Alshaikhi, Abdulwahed S. and Grinfeld, Michael and Wilson, Stephen K. (2022) Patterns formed in a thin film with spatially homogeneous and non-homogeneous Derjaguin disjoining pressure. European Journal of Applied Mathematics, 33 (5). pp. 894-918. ISSN 0956-7925

Cosentino, Mel and Nairn, David and Coscarella, Mariano and Jackson, Joseph C. and Windmill, James F. C. (2022) I beg your pardon? Acoustic behaviour of a wild solitary common dolphin who interacts with harbour porpoises. Bioacoustics, 31 (5). pp. 517-534. ISSN 2165-0586

Karpenko, Olena and Oterkus, Selda and Oterkus, Erkan (2022) Titanium alloy corrosion fatigue crack growth rates prediction : peridynamics based numerical approach. International Journal of Fatigue, 162. 107023. ISSN 0142-1123

Vithanage, Randika K.W. and Mohseni, Ehsan and Lines, David and Loukas, Charalampos and Foster, Euan and MacLeod, Charles N. and Pierce, S. Gareth and Gachagan, Anthony and Ding, Jialuo and Williams, Stewart (2022) Development of a phased array ultrasound roller probe for inspection of wire + arc additive manufactured components. Journal of Manufacturing Processes, 80. pp. 765-774. ISSN 1526-6125

Zhang, Dayi and Jackson, William and Dobie, Gordon and West, Graeme and MacLeod, Charles Norman (2022) Structure-from-motion based image unwrapping and stitching for small bore pipe inspections. Computers in Industry, 139. 103664. ISSN 0166-3615

Zimermann, Rastislav and Mohseni, Ehsan and Vithanage, Randika K.W. and Lines, David and Foster, Euan and MacLeod, Charles N. and Pierce, Stephen Gareth and Marinelli, Gianrocco and Williams, Stewart and Ding, Jialuo (2022) Increasing the speed of automated ultrasonic inspection of as-built additive manufacturing components by the adoption of virtual source aperture. Materials & Design, 220. 110822. ISSN 0264-1275

McPhillimy, Michael and Yakushina, Evgenia and Blackwell, Paul (2022) Tailoring titanium sheet metal using laser metal deposition to improve room temperature single-point incremental forming. Materials, 15 (17). 5985. ISSN 1996-1944

Oterkus, Selda and Oterkus, Erkan (2022) Comparison of peridynamics and lattice dynamics wave dispersion relationships. Journal of Peridynamics and Nonlocal Modeling. ISSN 2522-8978

Mittal, Honey and Ivaturi, Aruna and Khanuja, Manika (2022) MoSe 2-modified ZIF-8 novel nanocomposite for photocatalytic remediation of textile dye and antibiotic-contaminated wastewater. Environmental Science and Pollution Research. ISSN 1614-7499

Foster, Euan Alexander and Bolton, Gary and Bernard, Robert and McInnes, Martin and McKnight, Shaun and Nicolson, Ewan and Loukas, Charalampos and Vasilev, Momchil and Lines, Dave and Mohseni, Ehsan and Gachagan, Anthony and Pierce, Gareth and MacLeod, Charles N. (2022) Automated real time eddy current array inspection of nuclear assets. Sensors, 22 (16). p. 6036. 6036. ISSN 1424-8220

Maldonado, Diego A. and Vassileiou, Antony and Johnston, Blair and Florence, Alastair J. and Brown, Cameron J. (2022) Data mining crystallization kinetics. Digital Discovery, 1 (5). pp. 621-635. ISSN 2635-098X

Rutherford, Samantha H. and Greetham, Gregory M. and Towrie, Michael and Parker, Anthony W. and Kharratian, Soheila and Krauss, Thomas F. and Nordon, Alison and Baker, Matthew J. and Hunt, Neil T. (2022) Detection of paracetamol binding to albumin in blood serum using 2D-IR spectroscopy. Analyst, 147 (15). pp. 3464-3469. ISSN 0003-2654

Galadima, Yakubu Kasimu and Xia, Wenxuan and Oterkus, Erkan and Oterkus, Selda (2022) Peridynamic computational homogenization theory for materials with evolving microstructure and damage. Engineering with Computers, 39 (4). pp. 2945-2957. ISSN 0177-0667

Polyzois, Hector and Guo, Rui and Srirambhatla, Vijay K. and Warzecha, Monika and Prasad, Elke and Turner, Alice and Halbert, Gavin W. and Keating, Patricia and Price, Sarah L. and Florence, Alastair J. (2022) Crystal structure and twisted aggregates of oxcarbazepine form III. Crystal Growth and Design, 22 (7). pp. 4146-4156. ISSN 1528-7483

Oterkus, Selda and Wang, Bingquan and Oterkus, Erkan and Galadima, Yakubu Kasimu and Cocard, Margot and Mokas, Stefanos and Buckley, Jami and McCullough, Callum and Boruah, Dhrubajyoti and Gilchrist, Bob (2022) Structural integrity analysis of containers lost at sea using finite element method. Sustainable Marine Structures, 4 (2). pp. 11-17. ISSN 2661-3158

Wang, Bingquan and Oterkus, Selda and Oterkus, Erkan (2022) Thermomechanical phase change peridynamic model for welding analysis. Engineering Analysis with Boundary Elements, 140. pp. 371-385. ISSN 0955-7997

Wang, Hanlin and Tanaka, Satoyuki and Oterkus, Selda and Oterkus, Erkan (2022) Fracture parameter investigations of functionally graded materials by using ordinary state based peridynamics. Engineering Analysis with Boundary Elements, 139. pp. 180-191. ISSN 0955-7997

Leonidas, Emilios and Ayvar-Soberanis, Sabino and Laalej, Hatim and Fitzpatrick, Stephen and Willmott, Jon R. (2022) A comparative review of thermocouple and infrared radiation temperature measurement methods during the machining of metals. Sensors, 22 (13). 4693. ISSN 1424-8220

McMillan, Ross and Tabatabaeipour, Morteza and Hampson, Rory and Loukas, Charalampos and Zhao, Taiyi and Edwards, Rachel S. and MacLeod, Charles Norman and Dobie, Gordon (2022) Characterization of EMAT guided wave reflectivity on welded structures for use in ranging. IEEE Sensors Journal, 23 (5). pp. 4383-4391. ISSN 1530-437X

Ozdemir, M. and Oterkus, S. and Oterkus, E. and Amin, I. and El-Aassar, A. and Shawky, H. (2022) Fracture simulation of viscoelastic membranes by ordinary state-based peridynamics. Procedia Structural Integrity, 41 (C). pp. 333-342. ISSN 2452-3216

Premchander, Andrew and Amin, Islam and Oterkus, Selda and Oterkus, Erkan and Elminshawy, Nabil Ahmed Shawky (2022) Peridynamic modelling of propagation of cracks in photovoltaic panels. Procedia Structural Integrity, 41 (C). pp. 305-316. ISSN 2452-3216

Williams, Jonathan A. and Huesa, Carmen and Turunen, Mikael J. and Oo, James A. and Radzins, Oskars and Gardener, Wilf and Windmill, James F.C. and Isaksson, Hanna and Tanner, K. Elizabeth and Riddell, John S. and Coupaud, Sylvie (2022) Time course changes to structural, mechanical and material properties of bone in rats after complete spinal cord injury. The Journal of Musculoskeletal and Neuronal Interactions, 22 (2). pp. 212-234. ISSN 1108-7161

McWhinnie, Kirsty and Gibson, Jeremy and Gislason, Magnus and Tanner, Elizabeth and Windmill, James and Albertson, RCraig and Parsons, Kevin (2022) Assessing the levels of functional adaptation : finite element analysis reveals species, hybrid, and sexual variation in the biomechanics of African cichlid mandibles. Evolutionary Biology, 49 (2). pp. 205-220. ISSN 0071-3260

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and MacLeod, Charles N. and Lines, David and Javadi, Yashar and Espirindio E Silva, Misael Pimentel and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Stephen Gareth and Williams, Stewart and Ding, Jialuo (2022) Collaborative robotic Wire + Arc Additive Manufacture and sensor-enabled in-process ultrasonic Non-Destructive Evaluation. Sensors, 22 (11). 4203. ISSN 1424-8220

Arivazhagan, V. and Gun, Fraser and Reddy, R. Kiran Kumar and Li, Tianyue and Adelt, Milan and Robertson, Neil and Chen, Yu and Ivaturi, Aruna (2022) Indoor light harvesting lead-free 2-aminothiazolium bismuth iodide solar cells. Sustainable Energy and Fuels, 6 (13). pp. 3179-3186.

Stulga, P. and Whitfield, R. I. and Love, J. and Evans, D. (2022) Towards sustainable manufacturing within Industry 4.0 : a framework for the textile industry. Proceedings of the Design Society, 2. pp. 283-292. ISSN 2732-527X

Ozdemir, M. and Imachi, M. and Tanaka, S. and Oterkus, S. and Oterkus, E. (2022) A comprehensive investigation on macro-micro crack interactions in functionally graded materials using ordinary-state based peridynamics. Composite Structures, 287. 115299. ISSN 0263-8223

Parrott, Andrew J. and McIntyre, Allyson C. and Holden, Megan and Colquhoun, Gary and Chen, Zeng-Ping and Littlejohn, David and Nordon, Alison (2022) Calibration model transfer in mid-infrared process analysis with in situ attenuated total reflectance immersion probes. Analytical Methods, 14 (19). pp. 1889-1896. ISSN 1759-9660

Sheridan, Rachel and Cardona, Javier and Tachtatzis, Christos and Chen, Yi-Chieh and Cleary, Alison and Briggs, Naomi E. B. and Florence, Alastair and Atkinson, Robert and Michie, Craig and Andonovic, Ivan and Sefcik, Jan (2022) Effect of oscillatory flow conditions on crystalliser fouling investigated through non-invasive imaging. Chemical Engineering Science, 252. 117188. ISSN 0009-2509

Doerr, Frederik J. S. and Brown, Cameron J. and Florence, Alastair J. (2022) Direct image feature extraction and multivariate analysis for crystallisation process characterisation. Crystal Growth and Design, 22 (4). pp. 2105-2116. ISSN 1528-7483

Mitchell, Andrew J. and Duffy, Brian R. and Wilson, Stephen K. (2022) Unsteady coating flow on a rotating cylinder in the presence of an irrotational airflow with circulation. Physics of Fluids, 34 (4). 043105. ISSN 1070-6631

Amin, Islam and Eshra, Nadia and Oterkus, Selda and Oterkus, Erkan (2022) Experimental investigation of motion behavior in irregular wave and site selection analysis of a hybrid offshore renewable power station for Egypt. Ocean Engineering, 249. 110858. ISSN 0029-8018

Amin, Islam and Elsakka, Mohamed and Oterkus, Selda and Nguyen Tien, Cong and Ozdemir, Murat and El-Aassar, Abdel-hameed and Shawky, Hosam and Oterkus, Erkan (2022) Computational fluid dynamics-based design of anoxic bioreactor zone in wastewater treatment plant. Desalination and Water Treatment, 253. pp. 9-23. ISSN 1944-3986

Domingo-Roca, R. and Asciak, L. and Windmill, J. F. C. and Mulvana, H. and Jackson-Camargo, J. C. (2022) Non-destructive analysis of the mechanical properties of 3D-printed materials. Journal of Nondestructive Evaluation, 41 (1). 22. ISSN 0195-9298

Cousins, Joseph R. L. and Duffy, Brian R. and Wilson, Stephen K. and Mottram, Nigel J. (2022) Young and Young-Laplace equations for a static ridge of nematic liquid crystal, and transitions between equilibrium states. Proceedings A: Mathematical, Physical and Engineering Sciences, 478 (2259). 20210849. ISSN 1471-2962

Murphy, Keir N. and Naftaly, Mira and Nordon, Alison and Markl, Daniel (2022) Polymer pellet fabrication for accurate THz-TDS measurements. Applied Sciences, 12 (7). 3475. ISSN 2076-3417

Carvalho, André and Santos, Sérgio M. and Pérez-Sánchez, Germán and Gouveia, Daniel and Gomes, José R. B. and Jorge, Miguel (2022) Sticky-MARTINI as a reactive coarse-grained model for molecular dynamics simulations of silica polymerization. npj Computational Materials, 8 (1). 49. ISSN 2057-3960

Zhang, Dayi and Cao, Jianlin and Dobie, Gordon and MacLeod, Charles Norman (2022) A framework of using customized LIDAR to localize robot for nuclear reactor inspections. IEEE Sensors Journal, 22 (6). pp. 5352-5359. ISSN 1530-437X

Rasheed, Aamir and Ion, William (2022) A novel approach towards sustainability assessment in manufacturing and stakeholder's role. Sustainability, 14 (6). 3221. ISSN 2071-1050

McKendry, D.A. and Whitfield, R.I. and Duffy, A.H.B. (2022) Product lifecycle management implementation for high value engineering to order programmes : an informational perspective. Journal of Industrial Information Integration, 26. 100264. ISSN 2452-414X

McLean, Caitlin and Tiller, Ben and Mansour, Rolan and Brown, Kelly and Windmill, James and Dennany, Lynn (2022) Characterising the response of novel 3D printed CNT electrodes to the virulence factor pyocyanin. Journal of Electroanalytical Chemistry, 909. 116149. ISSN 0022-0728

Kim, Changbeom and Oterkus, Selda and Oterkus, Erkan and Kim, Yooil (2022) Probabilistic ship corrosion wastage model with Bayesian inference. Ocean Engineering, 246. 110571. ISSN 0029-8018

Mitchell, Andrew J. and Duffy, Brian R. and Wilson, Stephen K. (2022) Coating flow on a rotating cylinder in the presence of an irrotational airflow with circulation. Journal of Fluid Mechanics, 932. A33. ISSN 1469-7645

Karpenko, Olena and Oterkus, Selda and Oterkus, Erkan (2022) Investigating the influence of residual stresses on fatigue crack growth for additively manufactured titanium alloy Ti6Al4V by using peridynamics. International Journal of Fatigue, 155. 106624. ISSN 0142-1123

Chen, Zhen and Li, Heng (2022) Editorial : systems for construction management. Frontiers in Built Environment, 7. 764358. ISSN 2297-3362

Lei, Bingyu and Valluvar Oli, Arivazhagan and Ivaturi, Aruna and Robertson, Neil (2022) Mesocrystal TiO2 films : in-situ topotactic transformation and application in dye-sensitised solar cells. Sustainable Energy and Fuels, 6 (2). pp. 502-511.

Tabatabaeipour, Morteza and Trushkevych, Oksana and Dobie, Gordon and Edwards, Rachel S. and McMillan, Ross and MacLeod, Charles and O'Leary, Richard and Dixon, Steven and Gachagan, Anthony and Pierce, Stephen G. (2022) Application of ultrasonic guided waves to robotic occupancy grid mapping. Mechanical Systems and Signal Processing, 163. 108151. ISSN 0888-3270

Singh, Jonathan and Tant, Katherine Margaret Mary and Mulholland, Anthony and MacLeod, Charles Norman (2022) Deep learning based inversion of locally anisotropic weld properties from ultrasonic array data. Applied Sciences, 12 (2). 532. ISSN 2076-3417

Campbell, A. and Murray, P. and Yakushina, E. and Borocco, A. and Dokladal, P. and Decencière, P. and Ion, W. and Marshall, S. (2022) Automated analysis of platelet microstructures using a feature length orientation space. Journal of Materials Science, 57 (2). pp. 1448-1461. ISSN 0022-2461

Zhang, Dayi and Watson, Robert and MacLeod, Charles and Dobie, Gordon and Galbraith, Walter and Pierce, Gareth (2022) Implementation and evaluation of an autonomous airborne ultrasound inspection system. Nondestructive Testing and Evaluation, 37 (1). pp. 1-21. ISSN 1058-9759

Amin, Islam and Dai, David and Day, Sandy and Oterkus, Selda and Oterkus, Erkan (2022) Experimental investigation on the influence of interceptor plate on the motion performance of a cylindrical FPSO. Ocean Engineering, 243. 110339. ISSN 0029-8018

Tien Nguyen, Cong and Oterkus, Selda and Oterkus, Erkan (2021) Implementation of modified Wheeler model in peridynamic fatigue model to predict effects of overload and underload on fatigue crack growth rate. Theoretical and Applied Fracture Mechanics, 116. 103115. ISSN 0167-8442

Zimermann, Rastislav and Mohseni, Ehsan and Lines, David and Vithanage, Randika K.W. and MacLeod, Charles N. and Pierce, Stephen G. and Gachagan, Anthony and Javadi, Yashar and Williams, Stewart and Ding, Jialuo (2021) Multi-layer ultrasonic imaging of as-built Wire + Arc additive manufactured components. Additive Manufacturing, 48 (Part A). 102398. ISSN 2214-8604

Vithanage, Randika K. W. and Mohseni, Ehsan and Qiu, Zhen and MacLeod, Charles and Javadi, Yashar and Sweeney, Nina and Pierce, Gareth and Gachagan, Anthony (2021) A phased array ultrasound roller probe for automated in-process/interpass inspection of multipass welds. IEEE Transactions on Industrial Electronics, 68 (12). pp. 12781-12790. ISSN 0278-0046

Lu, Wei and Oterkus, Selda and Oterkus, Erkan and Zhang, Dagang (2021) Modelling of cracks with frictional contact based on peridynamics. Theoretical and Applied Fracture Mechanics, 116. 103082. ISSN 0167-8442

D'Ambrosio, Hannah-May and Colosimo, Teresa and Duffy, Brian R. and Wilson, Stephen K. and Yang, Lisong and Bain, Colin D. and Walker, Daniel E. (2021) Evaporation of a thin droplet in a shallow well: theory and experiment. Journal of Fluid Mechanics, 927. A43. ISSN 1469-7645

Jorge, Miguel and Milne, Andrew W. and Barrera, Maria Cecilia and Gomes, José R. B. (2021) New force-field for organosilicon molecules in the liquid phase. ACS Physical Chemistry Au, 1 (1). pp. 54-69. ISSN 2694-2445

Strazzullo, Gennaro and Ion, William J. and MacBryde, Jillian (2021) An investigation of the translational asset : a proposed classification. The Journal of the Knowledge Economy, 13 (4). pp. 3123-3149. ISSN 1868-7873

Siahboomy, Mehdi Asgari and Sarvari, Hadi and Chan, Daniel W.M. and Nassereddine, Hala and Chen, Zhen (2021) A multi-criteria optimization study for locating industrial warehouses with the integration of BIM and GIS data. Architectural Engineering and Design Management, 17 (5-6). pp. 478-495. ISSN 1745-2007

Nguyen, Cong Tien and Oterkus, Selda and Oterkus, Erkan and Amin, Islam and Ozdemir, Murat and El-Aassar, Abdel-Hameed and Shawky, Hosam (2021) Modelling of Eulerian incompressible fluid flows by using peridynamic differential operator. Ocean Engineering, 239. 109815. ISSN 0029-8018

Xia, Wenxuan and Oterkus, Erkan and Oterkus, Selda (2021) 3-Dimensional bond-based peridynamic representative volume element homogenisation. Physical Mesomechanics, 24. pp. 541-547. ISSN 1683-805X

Amin, Islam and Oterkus, Selda and Ali, Mohamed E.A. and Shawky, Hosam and Oterkus, Erkan (2021) Experimental investigation on a towing assessment for a floating desalination plant for Egypt. Ocean Engineering, 238. 109746. ISSN 0029-8018

Rutherford, Samantha and Nordon, Alison and Hunt, Neil T. and Baker, Matthew (2021) Biofluid analysis and classification using IR and 2D-IR spectroscopy. Chemometrics and Intelligent Laboratory Systems, 217. 104408. ISSN 0169-7439

Ogbeifun, Achoyamen Michael and Oterkus, Selda and Race, Julia and Naik, Harit and Moorthy, Dakshina and Bhowmik, Subrata and Ingram, Julie (2021) Vessel relocation solution for steel catenary riser touch down fatigue management. Ocean Engineering, 237. 109632. ISSN 0029-8018

Lin, Xiaosi and Siew, Wah Hoon and Liggat, John and Given, Martin and He, Jinliang (2021) Octavinyl polyhedral oligomeric silsesquioxane on tailoring the DC electrical characteristics of polypropylene. IET High Voltage. ISSN 2397-7264

Ogbeifun, Achoyamen Michael and Oterkus, Selda and Race, Julia and Naik, Harit and Moorthy, Dakshina and Bhowmik, Subrata and Ingram, Julie (2021) Floating catenary riser system concept for brownfield application. Ocean Engineering, 236. 109549. ISSN 0029-8018

Hilton, Kareema and Fitzpatrick, Stephen and Violatos, Ioannis and McEwan, Chris and Mehnen, Jorn (2021) A statistics based Digital Twin for the combined consideration of heat treatment and machining for predicting distortion. Procedia CIRP, 101. pp. 93-97. ISSN 2212-8271

Reber, M. and Duffy, A. H. B. and Hay, L. and Whitfield, R. I. (2021) ValueD : a model of cognitive value determination in design. Journal of Engineering Design, 32 (9). pp. 449-477. ISSN 1466-1837

Bang, D.J. and Ince, A. and Oterkus, E. and Oterkus, S. (2021) Crack growth modeling and simulation of a peridynamic fatigue model based on numerical and analytical solution approaches. Theoretical and Applied Fracture Mechanics, 114. 103026. ISSN 0167-8442

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

Amin, Islam and Dai, Saishuai and Day, Sandy and Ali, Mohamed E.A. and Balah, Ahmed and Shawky, Hosam and Oterkus, Selda and Oterkus, Erkan (2021) Experimental study on the motion response of an integrated floating desalination plant and offshore wind turbine on a non-ship platform. Ocean Engineering, 234. 109275. ISSN 0029-8018

Loukas, Charalampos and Williams, Veronica and Jones, Richard and Vasilev, Momchil and MacLeod, Charles Norman and Dobie, Gordon and Sibson, Jim and Pierce, Gareth and Gachagan, Anthony (2021) A cost-function driven adaptive welding framework for multi-pass robotic welding. Journal of Manufacturing Processes, 67. pp. 545-561. ISSN 1526-6125

Vasilev, Momchil and MacLeod, Charles N. and Loukas, Charalampos and Javadi, Yashar and Vithanage, Randika K. W. and Lines, David and Mohseni, Ehsan and Pierce, Stephen Gareth and Gachagan, Anthony (2021) Sensor-enabled multi-robot system for automated welding and in-process ultrasonic NDE. Sensors, 21 (15). 5077. ISSN 1424-8220

Wray, Alexander W. and Wray, Patrick S. and Duffy, Brian R. and Wilson, Stephen K. (2021) Contact-line deposits from multiple evaporating droplets. Physical Review Fluids, 6 (7). 073604. ISSN 2469-990X

Thomson, K. and Hunter, S. C. and Butler, S. H. and Robertson, D. J. (2021) Social media 'addiction' : the absence of an attentional bias to social media stimuli. Journal of Behavioral Addictions, 10 (2). pp. 302-313.

Kwame, JS and Yakushina, E and Blackwell, P (2021) Influence of longitudinal scratch defects on the bendability of titanium alloy. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-4.

Xia, Wenxuan and Oterkus, Erkan and Oterkus, Selda (2021) Ordinary state-based peridynamic homogenization of periodic micro-structured materials. Theoretical and Applied Fracture Mechanics, 113. 102960. ISSN 0167-8442

da Costa, Fernando P. and Grinfeld, Michael and Mottram, Nigel J. and Pinto, João T. and Xyxanadasy, Kedtysack (2021) Steady state solutions in a model of a cholesteric liquid crystal sample. Afrika Matematika, 32. pp. 645-672.

Warzecha, Monika and Florence, Alastair J. and Vekilov, Peter G. (2021) The ambiguous functions of the precursors that enable nonclassical modes of olanzapine nucleation and growth. Crystals, 11 (7). 738. ISSN 2073-4352

Bayoumi, Seif and Ali, Mohamed E.A. and Amin, Islam and El Torky, Raneem and Oterkus, Selda and Shawky, Hosam and Oterkus, Erkan (2021) Environmentally-driven design of a floating desalination platform (Case study: Reverse osmosis floating desalination platform of Ras Gharib, Egypt). AIMS Energy, 9 (3). pp. 623-650. ISSN 2333-8334

Gardiner, Alicia and Daly, Paul and Domingo-Roca, Roger and Windmill, James and Feeney, Andrew and Jackson, Joseph (2021) Additive manufacture of small-scale metamaterial structures for acoustic and ultrasonic applications. Micromachines, 12 (6). 634. ISSN 2072-666X

Smith, Eleanor and McRae, Kenneth and Semple, Gordon and Welsh, Hugh and Evans, Dorothy and Blackwell, Paul (2021) Enhancing vocational training in the post-COVID era through mobile mixed reality. Sustainability, 13 (11). 6144. ISSN 2071-1050

Akano, Damola Ikeoluwa and Ijomah, Winifred and Windmill, James (2021) Stakeholder considerations in remanufacturability decision-making : findings from a systematic literature review. Journal of Cleaner Production, 298. 126709. ISSN 0959-6526

Hosseinzadeh, Salaheddin and Jackson, William and Zhang, Dayi and McDonald, Liam and Dobie, Gordon and West, Graeme and MacLeod, Charles Norman (2021) A novel centralization method for pipe image stitching. IEEE Sensors Journal, 21 (10). pp. 11889-11898. ISSN 1530-437X

Omoniyi, O.A. and Mansour, R. and Cardona, M. J. and Briuglia, M. L. and O'Leary, R. L. and Windmill, J. F. C. (2021) Fabrication and characterization of a novel photoactive based (0-3) piezocomposite material with potential as a functional material for additive manufacturing of piezoelectric sensors. Journal of Materials Science: Materials in Electronics, 32. 11883–11892. ISSN 0957-4522

Spiridon, B. F. and Toon, M. and Hinz, A. and Ghosh, S. and Fairclough, S. M. and Guilhabert, B. J. E. and Strain, M. J. and Watson, I. M. and Dawson, M. D. and Wallis, D. J. and Oliver, R. A. (2021) Method for inferring the mechanical strain of GaN-on-Si epitaxial layers using optical profilometry and finite element analysis. Optical Materials Express, 11 (6). pp. 1643-1655. ISSN 2159-3930

Mishra, Puneet and Roger, Jean Michel and Jouan-Rimbaud-Bouveresse, Delphine and Biancolillo, Alessandra and Marini, Federico and Nordon, Alison and Rutledge, Douglas N. (2021) Recent trends in multi-block data analysis in chemometrics for multi-source data integration. Trends in Analytical Chemistry, 137. 116206. ISSN 0165-9936

Vasilev, Momchil and MacLeod, Charles and Galbraith, Walter and Javadi, Yashar and Foster, Euan and Dobie, Gordon and Pierce, Gareth and Gachagan, Anthony (2021) Non-contact in-process ultrasonic screening of thin fusion welded joints. Journal of Manufacturing Processes, 64. pp. 445-454. ISSN 1526-6125

Vasilev, Momchil and MacLeod, Charles and Javadi, Yashar and Pierce, Gareth and Gachagan, Anthony (2021) Feed forward control of welding process parameters through on-line ultrasonic thickness measurement. Journal of Manufacturing Processes, 64. pp. 576-584. ISSN 1526-6125

Robertson, David James and Hunter, Simon and Butler, Stephen (2021) Why your social media habit is probably not an addiction – new research. The Conversation.

Schofield, Feargus G. H. and Pritchard, David and Wilson, Stephen K. and Sefiane, Khellil (2021) The lifetimes of evaporating sessile droplets of water can be strongly influenced by thermal effects. Fluids, 6 (4). 141. ISSN 2311-5521

Galadima, Yakubu Kasimu and Oterkus, Erkan and Oterkus, Selda (2021) Model order reduction of linear peridynamic systems using static condensation. Mathematics and Mechanics of Solids, 26 (4). pp. 552-569. ISSN 1081-2865

Khun, Nay Win and Trung, Pham Quang and Butler, David Lee (2021) Study on hardness and wear resistance of shot peened AA7075-T6 aluminum alloy. Engineering Research Express, 3 (1). 015031. ISSN 2631-8695

Kuschmann, Anja and Nayar, Revathy Valsan and Lowit, Anja and Dunlop, Mark (2021) The use of technology in the management of children with phonological delay and adults with acquired dysarthria : a UK survey of current speech-language pathology practice. International Journal of Speech-Language Pathology, 23 (2). pp. 145-154. ISSN 1754-9507

Piotrowska, Roxana and Hesketh, Travis and Wang, Haozhen and Martin, Alan R. G. and Bowering, Deborah and Zhang, Chunqiu and Hu, Chunhua T. and McPhee, Scott A. and Wang, Tong and Park, Yaewon and Singla, Pulkit and McGlone, Thomas and Florence, Alastair and Tuttle, Tell and Ulijn, Rein V. and Chen, Xi (2021) Mechanistic insights of evaporation-induced actuation in supramolecular crystals. Nature Materials, 20. 403–409. ISSN 1476-1122

Economidou, Sofia N. and Uddin, Md. Jasim and Marques, Manuel J. and Douroumis, Dennis and Sow, Wan Ting and Li, Huaqiong and Reid, Andrew and Windmill, James F.C. and Podoleanu, Adrian (2021) A novel 3D printed hollow microneedle microelectromechanical system for controlled, personalized transdermal drug delivery. Additive Manufacturing, 38. 101815. ISSN 2214-8604

Imachi, M. and Takei, T. and Ozdemir, M. and Tanaka, S. and Oterkus, S. and Oterkus, E. (2021) A smoothed variable horizon peridynamics and its application to the fracture parameters evaluation. Acta Mechanica, 232. 533–553. ISSN 1619-6937

Javadi, Yashar and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Mineo, Carmelo and Pierce, Stephen G. and Gachagan, Anthony (2021) High-temperature in-process inspection followed by 96-h robotic inspection of intentionally manufactured hydrogen crack in multi-pass robotic welding. International Journal of Pressure Vessels and Piping, 189. 104288. ISSN 0308-0161

Zaed, Ozaer and Chen, Zhen (2021) Developing excellent architectural education for best practices in Libya. Journal of Pure and Applied Sciences, 20 (3). pp. 1-5. ISSN 2521-9200

Mohseni, Ehsan and Javadi, Yashar and Sweeney, Nina E. and Lines, David and MacLeod, Charles N. and Vithanage, Randika K.W. and Qiu, Zhen and Vasilev, Momchil and Mineo, Carmelo and Lukacs, Peter and Foster, Euan and Pierce, S. Gareth and Gachagan, Anthony (2021) Model-assisted ultrasonic calibration using intentionally embedded defects for in-process weld inspection. Materials and Design, 198. 109330. ISSN 0261-3069

Trushkevych, O and Tabatabaeipour, M and Dixon, S and Potter, MDG and Dobie, G and MacLeod, C and Edwards, RS (2021) Miniaturised SH EMATs for fast robotic screening of wall thinning in steel plates. IEEE Sensors Journal, 21 (2). pp. 1386-1394. ISSN 1530-437X

Mishra, Puneet and Nordon, Alison and Roger, Jean-Michel (2021) Improved prediction of tablet properties with near-infrared spectroscopy by a fusion of scatter correction techniques. Journal of Pharmaceutical and Biomedical Analysis, 192. 113684. ISSN 1873-264X

Gao, Yan and Oterkus, Selda (2021) Coupled thermo-fluid-mechanical peridynamic model for analysing composite under fire scenarios. Composite Structures, 255. 113006. ISSN 0263-8223

Ogbeifun, A. M. and Oterkus, S. and Race, J. and Naik, H. and Moorthy, D. and Bhowmik, S. and Ingram, J. (2021) A tabular optimisation technique for steel lazy wave riser. IOP Conference Series: Materials Science and Engineering, 1052 (1). 012022. ISSN 1757-899X

Gao, Yan and Oterkus, Selda (2020) Fluid-elastic structure interaction simulation by using ordinary state-based peridynamics and peridynamic differential operator. Engineering Analysis with Boundary Elements, 121. pp. 126-142. ISSN 0955-7997

Hicks, C. and Konkova, T. and Blackwell, P. (2020) Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates. Materials Characterization, 170. 110675. ISSN 1044-5803

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Prediction of hole expansion ratio of titanium alloys using R programming. Journal of Modeling and Optimization, 12 (2). pp. 125-137. ISSN 1759-7676

Doerr, Frederik J. S. and Burns, Lee J. and Lee, Becky and Hinds, Jeremy and Davis-Harrison, Rebecca L. and Frank, Scott A. and Florence, Alastair J. (2020) Peptide isolation via spray drying : particle formation, process design and implementation for the production of spray dried glucagon. Pharmaceutical Research, 37 (12). 255. ISSN 0724-8741

Yang, Zhenghao and Oterkus, Erkan and Oterkus, Selda (2020) Peridynamic formulation for higher-order plate theory. Journal of Peridynamics and Nonlocal Modeling. ISSN 2522-8978

Chappell, George A. and Guilhabert, Benoit and Garcia, Thor and Zhao, Kuaile and Watson, Ian M. and Dawson, Martin D. and Tamargo, Maria C. and Hastie, Jennifer E. (2020) Suspension and transfer printing of ZnCdMgSe membranes from an InP substrate. Optical Materials Express, 10 (12). pp. 3328-3341. ISSN 2159-3930

Doerr, Frederik J.S. and Florence, Alastair J. (2020) A micro-XRT image analysis and machine learning methodology for the characterisation of multi- particulate capsule formulations. International Journal of Pharmaceutics: X, 2. 100041. ISSN 2590-1567

Lu, Wei and Oterkus, Selda and Oterkus, Erkan (2020) Peridynamic modelling of Hertzian indentation fracture. Procedia Structural Integrity, 28. pp. 1559-1571. ISSN 2452-3216

Oterkus, Erkan and Madenci, Erdogan and Oterkus, Selda (2020) Peridynamic shell membrane formulation. Procedia Structural Integrity, 28. pp. 411-417. ISSN 2452-3216

Xia, Wenxuan and Oterkus, Erkan and Oterkus, Selda (2020) Peridynamic modelling of periodic microstructured materials. Procedia Structural Integrity, 28. pp. 820-828. ISSN 2452-3216

Yang, Zhenghao and Oterkus, Selda and Oterkus, Erkan (2020) Peridynamic formulation for Timoshenko beam. Procedia Structural Integrity, 28. pp. 464-471. ISSN 2452-3216

Paparistodimou, Giota and Duffy, Alex and Whitfield, Robert Ian and Knight, Philip and Robb, Malcolm (2020) A network tool to analyse and improve robustness of system architectures. Design Science, 6. e8. ISSN 2053-4701

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences, 2. 1999. ISSN 2523-3971

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Influence of sheet conditions on in-plane strain evolution via ex-situ tensile deformation of Ti-3Al-2.5V at room temperature. Journal of Materials and Applications, 10 (1). pp. 15-26. ISSN 2051-7750

Mishra, Puneet and Lohumi, Santosh and Khan, Haris Ahmad and Nordon, Alison (2020) Close-range hyperspectral imaging of whole plants for digital phenotyping : recent applications and illumination correction approaches. Computers and Electronics in Agriculture, 178. 105780. ISSN 0168-1699

Ferreira, Carla and Cardona, Javier and Agimelen, Okpeafoh and Tachtatzis, Christos and Andonovic, Ivan and Sefcik, Jan and Chen, Yi-Chieh (2020) Quantification of particle size and concentration using in-line techniques and multivariate analysis. Powder Technology, 376. pp. 1-11. ISSN 0032-5910

Javadi, Yashar and Sweeney, Nina E. and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Qiu, Zhen and Vithanage, Randika K.W. and Mineo, Carmelo and Stratoudaki, Theodosia and Pierce, Stephen G. and Gachagan, Anthony (2020) In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding. Materials and Design, 195. 108981. ISSN 0261-3069

Singh, J. and Mulholland, A.J. and Tant, K.M.M. and Stratoudaki, T. and Curtis, A. and Ijomah, W. and Windmill, J.F.C. (2020) Component shape optimisation for enhanced non-destructive testing. Materials & Design, 195. 109041. ISSN 0264-1275

Heo, Jeeyeon and Yang, Zhenghao and Xia, Wenxuan and Oterkus, Selda and Oterkus, Erkan (2020) Free vibration analysis of cracked plates using peridynamics. Ships and Offshore Structures, 15 (sup1). S220-S229. ISSN 1754-212X

Heo, Jeeyeon and Yang, Zhenghao and Xia, Wenxuan and Oterkus, Selda and Oterkus, Erkan (2020) Buckling analysis of cracked plates using peridynamics. Ocean Engineering, 214. 107817. ISSN 0029-8018

Mishra, Puneet and Roger, Jean Michel and Rutledge, Douglas N. and Biancolillo, Alessandra and Marini, Federico and Nordon, Alison and Jouan-Rimbaud-Bouveresse, Delphine (2020) MBA-GUI : a chemometric graphical user interface for multi-block data visualisation, regression, classification, variable selection and automated pre-processing. Chemometrics and Intelligent Laboratory Systems, 205. 104139. ISSN 0169-7439

Hicks, C. and Konkova, T. and Blackwell, P. (2020) Microstructure development in Laser Metal Deposition of Ti-5553. MATEC Web of Conferences, 321. 03019. ISSN 2261-236X

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Effect of edge conditions on the formability of commercially pure titanium sheet (Grade 2) at room temperature. MATEC Web of Conferences, 321. 04027. ISSN 2261-236X

Mandal, Paranjayee and Gomez-Gallegos, Ares and Gonzalez, Diego and Elrakayby, Hosam and Blackwell, Paul (2020) Superplastic behaviour of Ti54M and Ti64. MATEC Web of Conferences, 321. 04028. ISSN 2261-236X

Khalili, Hadi and Oterkus, Selda and Barltrop, Nigel and Bharadwaj, Ujjwal (2020) Updating the distributions of uncertain parameters involved in fatigue analysis. Journal of Marine Science and Engineering, 8 (10). 778. ISSN 2077-1312

Trujllo, Sara and González-García, Cristina and Rico, Patricia and Reid, Andrew and Windmill, James and Dalby, Matthew J. and Salmerón-Sánchez, Manuel (2020) Engineered 3D hydrogels with full-length fibronectin that sequester and present growth factors. Biomaterials, 252. 120104. ISSN 1878-5905

Warzecha, Monika and Verma, Lakshmanji and Johnston, Blair F. and Palmer, Jeremy C. and Florence, Alastair J. and Vekilov, Peter G. (2020) Olanzapine crystal symmetry originates in preformed centrosymmetric solute dimers. Nature Chemistry, 12 (10). pp. 914-920. ISSN 1755-4330

Lines, David and Javadi, Yashar and Mohseni, Ehsan and Vasilev, Momchil and MacLeod, Charles Norman and Mineo, Carmelo and Wathavana Vithanage, Randika Kosala and Qiu, Zhen and Zimermann, Rastislav and Loukas, Charalampos and Foster, Euan and Pierce, Gareth and Gachagan, Anthony (2020) A flexible robotic cell for in-process inspection of multi-pass welds. Insight: The Journal of the British Institute of Non-Destructive Testing, 62 (9). pp. 526-532. ISSN 1354-2575

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Khan, Aamir and Mineo, Carmelo and Dobie, Gordon and MacLeod, Charles and Pierce, Gareth (2020) Vision guided robotic inspection for parts in manufacturing and remanufacturing industry. Journal of Remanufacturing, 11 (1). pp. 49-70. ISSN 2210-4690

Amin, Islam and Dai, Saishuai and Oterkus, Selda and Day, Sandy and Oterkus, Erkan (2020) Experimental investigation on the motion response of a novel floating desalination plant for Egypt. Ocean Engineering, 210. pp. 1-13. 107535. ISSN 0029-8018

Pérez-Sánchez, Germán and Vicente, Filipa A. and Schaeffer, Nicolas and Cardoso, Inês S. and Ventura, Sónia P.M. and Jorge, Miguel and Coutinho, João A.P. (2020) Unravelling the interactions between surface-active ionic liquids and triblock copolymers for the design of thermal responsive systems. Journal of Physical Chemistry B, 124 (32). pp. 7046-7058. ISSN 1520-6106

Saltin, Brian D. and Matsumura, Yoko and Reid, Andrew and Windmill, James F. and Gorb, Stanislav N. and Jackson, Joseph C. (2020) Resilin distribution and sexual dimorphism in the midge antenna and their influence on frequency sensitivity. Insects, 11 (8). 520. ISSN 2075-4450

Duan, Xuhui and Siew, Wah Hoon and Given, Martin and Liggat, John and He, Jinliang (2020) Effect of different surface treatment agents on the physical chemistry and electrical properties of polyethylene nano-alumina nanocomposites. IET High Voltage, 5 (4). pp. 397-402. ISSN 2397-7264

Nguyen, Tien Cong and Oterkus, Selda (2020) Investigating the effect of brittle crack propagation on the strength of ship structures by using peridynamics. Ocean Engineering, 209. 107472. ISSN 0029-8018

Li, Mingyang and Lu, Wei and Oterkus, Erkan and Oterkus, Selda (2020) Thermally-induced fracture analysis of polycrystalline materials by using peridynamics. Engineering Analysis with Boundary Elements, 117. pp. 167-187. ISSN 0955-7997

Ingram, M. and Gachagan, A. and Nordon, A. and Mullholland, A. J. and Hegarty, M. (2020) Calibration of ultrasonic hardware for enhanced total focusing method imaging. Insight: The Journal of the British Institute of Non-Destructive Testing, 62 (7). pp. 408-415. ISSN 1354-2575

Tuni, Andrea and Rentizelas, Athanasios and Chinese, Damiana (2020) An integrative approach to assess environmental and economic sustainability in multi-tier supply chains. Production Planning and Control, 31 (11-12). pp. 861-882. ISSN 0953-7287

Alshaikhi, Abdulwahed S. and Wilson, Stephen K. and Duffy, Brian R. (2020) Rivulet flow down a slippery substrate. Physics of Fluids, 32 (7). 072011. ISSN 1070-6631

Yang, Zhenghao and Oterkus, Erkan and Oterkus, Selda (2020) A state-based peridynamic formulation for functionally graded Euler-Bernoulli beams. CMES - Computer Modeling in Engineering and Sciences, 124 (2). pp. 527-544. ISSN 1526-1506

Ingram, Marcus and Mineo, Carmelo and Gachagan, Anthony and Mulholland, Anthony J. and Nordon, Alison and Hegarty, Martin (2020) Determination of bubble size distribution using ultrasound array imaging. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 67 (7). pp. 1424-1437. ISSN 0885-3010

Rentizelas, Athanasios and Lopes de Sousa Jabbour, Ana Beatriz and Al Balushi, Ahmed Darwish and Tuni, Andrea (2020) Social sustainability in the oil and gas industry : institutional pressure and the management of sustainable supply chains. Annals of Operations Research, 290 (1). pp. 279-300. ISSN 0254-5330

Javadi, Yashar and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Mineo, Carmelo and Foster, Euan and Pierce, Stephen G. and Gachagan, Anthony (2020) Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system. Materials and Design, 191. 108655. ISSN 0261-3069

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750

Solomun, Jana I. and Totten, John D. and Wongpinyochit, Thidarat and Florence, Alastair J. and Seib, F. Philipp (2020) Manual versus microfluidic-assisted nanoparticle manufacture : impact of silk fibroin stock on nanoparticle characteristics. ACS Biomaterials Science & Engineering, 6 (5). pp. 2796-2804. ISSN 2373-9878

McGregor, Alexander and Dobie, Gordon and Pearson, Neil R. and MacLeod, Charles N. and Gachagan, Anthony (2020) Determining position and orientation of a 3-wheel robot on a pipe using an accelerometer. IEEE Sensors Journal, 20 (9). pp. 5061-5071. 8951135. ISSN 1530-437X

Karkasinas, Aineias and Rentizelas, Athanasios (2020) Verification and validation : a novel product lifecycle management-based approach. International Journal of Product Lifecycle Management, 12 (2). pp. 149-183. ISSN 1743-5110

Karpenko, Olena and Oterkus, Selda and Oterkus, Erkan (2020) Influence of different types of small-size defects on propagation of macro-cracks in brittle materials. Journal of Peridynamics and Nonlocal Modeling. ISSN 2522-8978

Chen, Zhen and Agapiou, Andrew and Li, Heng (2020) A benefits prioritization analysis on adopting BIM systems against major challenges in megaproject delivery. Frontiers in Built Environment, 6. 26. ISSN 2297-3362

Zhang, Dayi and Watson, Robert and Dobie, Gordon and MacLeod, Charles and Khan, Aamir and Pierce, Gareth (2020) Quantifying impacts on remote photogrammetric inspection using unmanned aerial vehicles. Engineering Structures, 209. 109940. ISSN 0141-0296

Javadi, Yashar and Sweeney, Nina E. and Mohseni, Ehsan and MacLeod, Charles N. and Lines, David and Vasilev, Momchil and Qiu, Zhen and Mineo, Carmelo and Pierce, Stephen G. and Gachagan, Anthony (2020) Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing. Journal of Manufacturing Processes. ISSN 1526-6125

Raval, Vishal and Siddique, Humera and Brown, Cameron J. and Florence, Alastair J. (2020) Development and characterisation of a cascade of moving baffle oscillatory crystallisers (CMBOC). CrystEngComm, 22 (13). pp. 2288-2296. ISSN 1466-8033

Paparistodimou, Giota and Duffy, Alex and Whitfield, Robert Ian and Knight, Philip and Robb, Malcolm (2020) A network science-based assessment methodology for robust modular system architectures during early conceptual design. Journal of Engineering Design, 31 (4). pp. 179-218. ISSN 1466-1837

Bolbot, Victor and Trivyza, Nikoletta L. and Theotokatos, Gerasimos and Boulougouris, Evangelos and Rentizelas, Athanasios and Vassalos, Dracos (2020) Cruise ships power plant optimisation and comparative analysis. Energy, 196. 117061. ISSN 1873-6785

Lichtenegger, Georg and Rentizelas, Athanasios A. and Trivyza, Nikoletta and Siegl, Stefan (2020) Offshore and onshore wind turbine blade waste material forecast at a regional level in Europe until 2050. Waste Management, 106. pp. 120-131. ISSN 1879-2456

Zhang, Ya and Pan, Guang and Zhang, Yonghao and Haeri, Sina (2020) A relaxed multi-direct-forcing immersed boundary-cascaded lattice Boltzmann method accelerated on GPU. Computer Physics Communications, 248. 106980. ISSN 0010-4655

Elnabwy, Mohamed T. and Elbeltagi, Emad and El Banna, Mahmoud M. and Elshikh, Mohamed M.Y. and Motawa, Ibrahim and Kaloop, Mosbeh R. (2020) An approach based on Landsat images for shoreline monitoring to support integrated coastal management - a case study, Ezbet Elborg, Nile Delta, Egypt. ISPRS International Journal of Geo-Information, 9 (4). 199. ISSN 2220-9964

Barrera, Maria Cecilia and Jorge, Miguel (2020) A polarization-consistent model for alcohols to predict solvation free energies. Journal of Chemical Information and Modeling, 60 (3). pp. 1352-1367. ISSN 1549-9596

Srirambhatla, Vijay K. and Guo, Rui and Dawson, Daniel M. and Price, Sarah L and Florence, Alastair J. (2020) Reversible two-step single-crystal to single-crystal phase transitions between desloratadine forms I, II and III. Crystal Growth and Design, 20 (3). pp. 1800-1810. ISSN 1528-7483

Kulakov, Mykola and Huang, Jianglin and Ntovas, Michail and Moturu, Shanmukha (2020) Microstructure evolution during hot deformation of REX734 austenitic stainless steel. Metallurgical and Materials Transactions A, 51 (2). pp. 845-854. ISSN 1073-5623

Schofield, Feargus G. H. and Wray, Alexander W. and Pritchard, David and Wilson, Stephen K. (2020) The shielding effect extends the lifetimes of two-dimensional sessile droplets. Journal of Engineering Mathematics, 120 (1). pp. 89-110. ISSN 0022-0833

Afonso, Rui and Toda, Jordi and Gomes, José R.B. and Fischer, Michael and Campbell, Christopher and Jorge, Miguel (2020) A computational study of the interaction of C2 hydrocarbons with CuBTC. Computational Materials Science, 173. 109438. ISSN 0927-0256

Zhu, B. and Guerreiro, J. and Zhang, Y. and Tiller, B. and Windmill, J. F. C. (2020) Additive manufacturing (AM) capacitive acoustic and ultrasonic transducers using a commercial direct light processing (DLP) printer. IEEE Sensors Journal, 20 (4). pp. 1770-1777. ISSN 1530-437X

Wray, Alexander W. and Duffy, Brian R. and Wilson, Stephen K. (2020) Competitive evaporation of multiple sessile droplets. Journal of Fluid Mechanics, 884. A45. ISSN 0022-1120

Amin, Islam and Ali, Mohamed E.A. and Bayoumi, Seif and Oterkus, Selda and Shawky, Hosam and Oterkus, Erkan (2020) Conceptual design and numerical analysis of a novel floating desalination plant powered by marine renewable energy for Egypt. Journal of Marine Science and Engineering, 8 (2). 95. ISSN 2077-1312

Thies, Tabea and Mücke, Doris and Lowit, Anja and Kalbe, Elke and Steffen, Julia and Barbe, Michael T. (2020) Prominence marking in Parkinsonian speech and its correlation with motor performance and cognitive abilities. Neuropsychologia, 137. pp. 1-16. 107306. ISSN 0028-3932

Stamoulakatos, Anastasios and Cardona, Javier and McCaig, Chris and Murray, David and Filius, Hein and Atkinson, Robert and Bellekens, Xavier and Michie, Craig and Andonovic, Ivan and Lazaridis, Pavlos and Hamilton, Andrew and Hossain, Md. Moinul and Di Caterina, Gaetano and Tachtatzis, Christos (2020) Automatic annotation of subsea pipelines using deep learning. Sensors, 20 (3). 674. ISSN 1424-8220

Trivyza, Nikoletta L. and Rentizelas, Athanasios and Theotokatos, Gerasimos (2020) A comparative analysis of EEDI versus lifetime CO2 emissions. Journal of Marine Science and Engineering, 8 (1). 61. ISSN 2077-1312

Pritchard, David and Croudace, Andrew I. and Wilson, Stephen K. (2020) Thixotropic pumping in a cylindrical pipe. Physical Review Fluids, 5 (1). 013303. ISSN 2469-990X

Vazic, Bozo and Diyaroglu, Cagan and Oterkus, Erkan and Oterkus, Selda (2020) Family member search algorithms for peridynamic analysis. Journal of Peridynamics and Nonlocal Modeling. pp. 1-26. ISSN 2522-8978

Sladekova, Kristina and Campbell, Christopher and Grant, Calum and Fletcher, Ashleigh J. and Gomes, José R. B. and Jorge, Miguel (2019) The effect of atomic point charges on adsorption isotherms of CO2 and water in metal organic frameworks. Adsorption. ISSN 0929-5607

Badman, Clive and Cooney, Charles L. and Haslam, Robert T. and Florence, Alastair and Konstantinov, Konstantin and Krumme, Markus and Mascia, Salvatore and Nasr, Moheb and Trout, Bernhardt L. and Baddour, Raymond F. (2019) Why we need continuous pharmaceutical manufacturing and how to make it happen : a summary of thoughts from the international symposium on continuous manufacturing. Journal of Pharmaceutical Sciences, 108 (11). pp. 3521-3523. ISSN 0022-3549

Mishra, Puneet and Nordon, Alison (2019) Classifying green teas with near infrared hyperspectral imaging. NIR News. ISSN 1756-2708

Yang, Zhenghao and Vazic, Bozo and Diyaroglu, Cagan and Oterkus, Erkan and Oterkus, Selda (2019) A Kirchhoff plate formulation in a state-based peridynamic framework. Mathematics and Mechanics of Solids. ISSN 1081-2865

Casarini, Cecilia and Romero-Garcia, Vincent and Groby, Jean-Philippe and Tiller, Ben and Windmill, James F. C. and Jackson, Joseph C. (2019) Fabrication and characterization of 3D printed thin plates for acoustic metamaterials applications. IEEE Sensors Journal, 19 (22). pp. 10365-10372. ISSN 1530-437X

Rentizelas, Athanasios and Costa Melo, Isotilia and Alves Junior, Paulo Nocera and Campoli, Jessica Suarez and do Nascimento Rebelatto, Daisy Aparecida (2019) Multi-criteria efficiency assessment of international biomass supply chain pathways using data envelopment analysis. Journal of Cleaner Production, 237. 117690. ISSN 0959-6526

Javadi, Yashar and MacLeod, Charles N. and Pierce, Stephen G. and Gachagan, Anthony and Lines, David and Mineo, Carmelo and Ding, Jialuo and Williams, Stewart and Vasilev, Momchil and Mohseni, Ehsan and Su, Riliang (2019) Ultrasonic phased array inspection of a Wire + Arc Additive Manufactured (WAAM) sample with intentionally embedded defects. Additive Manufacturing, 29. 100806. ISSN 2214-8604

Bordos, Ecaterina and Islam, Muhammad T. and Florence, Alastair J. and Halbert, Gavin W. and Robertson, John (2019) Use of terahertz-Raman spectroscopy to determine solubility of the crystalline active pharmaceutical ingredient in polymeric matrices during hot melt extrusion. Molecular Pharmaceutics, 16 (10). pp. 4361-4371. ISSN 1543-8384

Gordon, Shira D. and Tiller, Benjamin and Windmill, James F.C. and Krugner, Rodrigo and Narins, Peter M. (2019) Transmission of the frequency components of the vibrational signal of the glassy-winged sharpshooter, Homalodisca vitripennis, within and between grapevines. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 205 (5). pp. 783-791. ISSN 0340-7594

Prasad, Elke and Islam, Muhammad T. and Goodwin, Daniel J. and Megarry, Andrew J. and Halbert, Gavin W. and Florence, Alastair J. and Robertson, John (2019) Development of a hot-melt extrusion (HME) process to produce drug loaded Affinisol™ 15LV filaments for Fused Filament Fabrication (FFF) 3D printing. Additive Manufacturing, 29. 100776. ISSN 2214-8604

Punzo, Giuliano and MacLeod, Charles and Baumanis, Kristaps and Summan, Rahul and Dobie, Gordon and Pierce, Stephen and Macdonald, Malcolm (2019) Bipartite guidance, navigation and control architecture for autonomous aerial inspections under safety constraints. Journal of Intelligent and Robotic Systems, 95. 1049–1061. ISSN 0921-0296

Sminia, Harry and Ates, Aylin and Paton, Steve and Smith, Marisa (2019) High value manufacturing : capability, appropriation, and governance. European Management Journal, 37 (4). pp. 516-528. ISSN 0263-2373

Perez-Sanchez, German and Vicente, Filipa A. and Schaeffer, Nicolas and Cardoso, Inês S. and Ventura, Sonia P.M. and Jorge, Miguel and Coutinho, Joao A.P. (2019) Rationalizing the phase behavior of triblock-copolymers through experiments and molecular simulations. Journal of Physical Chemistry C, 123 (34). pp. 21224-21236. ISSN 1932-7447

Leitão, Miguel F. and Islim, Mohamed Sufyan and Yin, L. and Viola, S. and Watson, S. and Kelly, A. and Dong, Y. and Li, X. and Zeng, H. and Videv, S. and Haas, H. and Gu, E. and Watson, I. M. and Laurand, N. and Dawson, M. D. (2019) Pump-power-dependence of CsPbBr3-in-Cs4PbBr6 quantum dot color converter. Optical Materials Express, 9 (8). pp. 3504-3518. ISSN 2159-3930

Petrakis, Konstantinos and Hird, Abigail and Wodehouse, Andrew (2019) The concept of prototyping purpose : towards a new kind of taxonomic classification. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1). pp. 1643-1652. ISSN 2220-4342

Zhang, Y J and Qian, X W and Zhou, J X and Yin, Y J and Shen, X and Ji, X. Y. and Huang, J L (2019) Simulation of casting filling process using the lattice Boltzmann method. IOP Conference Series: Materials Science and Engineering, 529 (1). 012061. ISSN 1757-899X

Tedeschi, Stefano and Emmanouilidis, Christos and Mehnen, Jörn and Roy, Rajkumar (2019) A design approach to IoT endpoint security for production machinery monitoring. Sensors, 19 (10). 2355. ISSN 1424-8220

Trivyza, Nikoletta L. and Rentizelas, Athanasios and Theotokatos, Gerasimos (2019) Impact of carbon pricing on the cruise ship energy systems optimal configuration. Energy, 175. pp. 952-966. ISSN 1873-6785

Chen, Zhen (2019) Editorial : [BIM for waste and resource management]. Proceedings of the ICE- Waste and Resource Management, 172 (1). pp. 1-2. ISSN 1747-6526

Allan, D. and Daly, J. and Liggat, J.J. (2019) Oxidative and non-oxidative degradation of a TDI-based polyurethane foam : volatile product and condensed phase characterisation by FTIR and solid state 13C NMR spectroscopy. Polymer Degradation and Stability, 161. pp. 57-73. ISSN 0141-3910

Javadi, Y. and MacLeod, C. N. and Pierce, S. G. and Gachagan, A. and Kerr, W. and Ding, Jialuo and Williams, Stewart and Vasilev, M. and Su, R. and Mineo, C. and Dziewierz, J. (2019) Ultrasonic phased array inspection of wire + arc additive manufacture samples using conventional and total focusing method imaging approaches. Insight: Non-Destructive Testing and Condition Monitoring, 61 (3). pp. 144-148. ISSN 1354-2575

Agimelen, Okpeafoh S. and Svoboda, Vaclav and Ahmed, Bilal and Cardona, Javier and Dziewierz, Jerzy and Brown, Cameron J. and McGlone, Thomas and Cleary, Alison and Tachtatzis, Christos and Michie, Craig and Florence, Alastair J. and Andonovic, Ivan and Mulholland, Anthony J. and Sefcik, Jan (2018) Multi-sensor inline measurements of crystal size and shape distributions during high shear wet milling of crystal slurries. Advanced Powder Technology, 29 (12). pp. 2987-2995. ISSN 1568-5527

Khan, Faisal and Mehnen, Jorn and Sreenuch, Tarapong and Alam, Syed and Townsend, Paul (2018) Swarm eye : a distributed autonomous surveillance system. International Journal of Advanced Computer Science and Applications, 9 (12). 83. ISSN 2156-5570

Zhang, Ying and Enang, Etieno and Sminia, Harry (2018) Post-acquisition integration of emerging market multinational corporations : a research agenda. Multinational Business Review. ISSN 1525-383X

Doerr, Frederik J.S. and Oswald, Iain D.H. and Florence, Alastair J. (2018) Quantitative investigation of particle formation of a model pharmaceutical formulation using single droplet evaporation experiments and X-ray tomography. Advanced Powder Technology, 29 (12). pp. 2996-3006. ISSN 1568-5527

Siddiqi, Muftooh U. R. and Ijomah, Winifred L. and Dobie, Gordon I. and Hafeez, Muthair and Pierce, S. Gareth and Ion, William and Mineo, Carmelo and MacLeod, Charles N. (2018) Low cost three-dimensional virtual model construction for remanufacturing industry. Journal of Remanufacturing. ISSN 2210-4690

Casarini, Cecilia and Tiller, Ben and Mineo, Carmelo and MacLeod, Charles N. and Windmill, James F. C. and Jackson, Joseph C. (2018) Enhancing the sound absorption of small-scale 3D printed acoustic metamaterials based on Helmholtz resonators. IEEE Sensors Journal, 18 (19). pp. 7949-7955. ISSN 1530-437X

Grzelak, Adam W. and Boinard, Pascal and Liggat, John J. (2018) The influence of diol chain extender on morphology and properties of thermally-triggered UV-stable self-healing polyurethane coatings. Progress in Organic Coatings, 122. pp. 1-9. ISSN 0300-9440

Hatcher, G. and Ion, W. and MacLachlan, R. and Marlow, M. and Simpson, B. and Wilson, N. and Wodehouse, A. (2018) Using linkography to compare creative methods for group ideation. Design Studies, 58. pp. 127-152. ISSN 0142-694X

Tang, Rong and Liggat, John J. and Siew, Wah H. (2018) Partial discharge behaviour of biaxially orientated PET films : the effect of crystalline morphology. Polymer Degradation and Stability, 155. pp. 122-129. ISSN 0141-3910

Case, David H. and Srirambhatla, Vijay K. and Guo, Rui and Watson, Rona E. and Price, Louise S. and Polyzois, Hector and Cockcroft, Jeremy K. and Florence, Alastair J. and Tocher, Derek A. and Price, Sarah L. (2018) Successful computationally directed templating of metastable pharmaceutical polymorphs. Crystal Growth and Design, 18 (9). pp. 5322-5331. ISSN 1528-7483

Tuni, Andrea and Rentizelas, Athanasios and Duffy, Alex (2018) Environmental performance measurement for green supply chains : a systematic analysis and review of quantitative methods. International Journal of Physical Distribution and Logistics Management, 48 (8). pp. 765-793. ISSN 0960-0035

Fu, Shaowei and Cheng, Fang and Tjahjowidodo, Tegoeh and Yu, Zhou and Butler, David (2018) A non-contact measuring system for in-situ surface characterization based on laser confocal microscopy. Sensors, 18 (8). 2657. ISSN 1424-8220

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2018) Industrial validation of strain in cold roll forming of UHSS. Procedia Manufacturing, 15. pp. 788-795. ISSN 2351-9789

Morozov, M. and Pierce, S.G. and MacLeod, C.N. and Mineo, C. and Summan, R. (2018) Off-line scan path planning for robotic NDT. Measurement, 122. pp. 284-290. ISSN 1873-412X

Gomez Gallegos, Ares Argelia and Mandal, Paranjayee and Gonzalez, Diego and Zuelli, Nicola and Blackwell, Paul (2018) Studies on titanium alloys for aerospace application. Defect and Diffusion Forum, 385. pp. 419-423. ISSN 1662-9507

Rentizelas, Athanasios and Shpakova, Agnessa and Masek, Ondrej (2018) Designing an optimised supply network for sustainable conversion of waste agricultural plastics into higher value products. Journal of Cleaner Production, 189. pp. 683-700. ISSN 0959-6526

Costa Melo, Isotilia and Rentizelas, Athanasios and Alves Junior, Paulo Nocera and Campoli, Jessica Suarez and do Nascimento Rebelatto, Daisy Aparecida (2018) An assessment of biomass supply chain : a DEA application. Athens Journal of Sciences, 5 (2). pp. 125-140.

Kum, Chun Wai and Sato, Takashi and Guo, Jiang and Liu, Kui and Butler, David (2018) A novel media properties-based material removal rate model for magnetic field-assisted finishing. International Journal of Mechanical Sciences, 141. pp. 189-197. ISSN 0020-7403

Brown, Cameron J. and McGlone, Thomas and Yerdelen, Stephanie and Srirambhatla, Vijay and Mabbott, Fraser and Gurung, Rajesh and Briuglia, Maria L. and Ahmed, Bilal and Polyzois, Hector and McGinty, John and Perciballi, Francesca and Fysikopoulos, Dimitris and Macfhionnghaile, Pól and Siddique, Humera and Raval, Vishal and Harrington, Tomás S. and Vassileiou, Antony D. and Robertson, Murray and Prasad, Elke and Johnston, Andrea and Johnston, Blair and Nordon, Alison and Srai, Jagjit S. and Halbert, Gavin and ter Horst, Joop H. and Price, Chris J. and Rielly, Chris D. and Sefcik, Jan and Florence, Alastair J. (2018) Enabling precision manufacturing of active pharmaceutical ingredients : workflow for seeded cooling continuous crystallisations. Molecular Systems Design & Engineering, 2018 (3). pp. 518-549. ISSN 2058-9689

Trung, Pham Quang and Butler, David Lee and Idapalapati, Sridhar (2018) A numerical and experimental study of distribution of the residual stress on the shot peened low alloy steel. Journal of Engineering Materials and Technology, 140 (4). 041006. ISSN 0094-4289

Ottoboni, Sara and Chrubasik, Michael and Mir Bruce, Layla and Nguyen, Thai Thu Hien and Robertson, Murray and Johnston, Blair and Oswald, Iain D. H. and Florence, Alastair and Price, Chris (2018) Impact of paracetamol impurities on face properties : investigating the surface of single crystals using TOF-SIMS. Crystal Growth and Design, 18 (5). 2750–2758. ISSN 1528-7483

Singo, Nthambe and Coles, John and Rosochowska, Malgorzata and Lalvani, Himanshu and Hernandez, Jose and Ion, William (2018) Optimising mechanical properties of hot forged nickel superalloy 625 components. AIP Conference Proceedings, 1960 (1). 110010. ISSN 1551-7616

Tang, Rong and Liggat, John J. and Siew, Wah H. (2018) Filler and additive effects on partial discharge degradation of PET films used in PV devices. Polymer Degradation and Stability, 150. pp. 148-157. ISSN 0141-3910

Mauro, Caterina and Rentizelas, Athanasios A. and Chinese, Damiana (2018) International vs. domestic bioenergy supply chains for co-firing plants : the role of pre-treatment technologies. Renewable Energy, 119. pp. 712-730. ISSN 0960-1481

Mineo, Carmelo and Riise, Jonathan and Summan, Rahul and MacLeod, Charles N. and Pierce, S. Gareth (2018) Index based triangulation method for efficient generation of large three-dimensional ultrasonic C-scans. Insight: The Journal of the British Institute of Non-Destructive Testing. ISSN 1354-2575

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Sheridan, Marion and Simpson, Barbara and Wodehouse, Andrew (2018) Evolving improvised ideation from humour constructs : a new method for collaborative divergence. Creativity and Innovation Management, 27 (1). pp. 91-101. ISSN 0963-1690

Campbell, Andrew and Murray, Paul and Yakushina, Evgenia and Marshall, Stephen and Ion, William (2018) New methods for automatic quantification of microstructural features using digital image processing. Materials & Design, 141. pp. 395-406. ISSN 0264-1275

Ward, Michael and Halliday, Steven and Uflewska, Olga and Wong, TC (2018) Three dimensions of maturity required to achieve future state, technology-enabled manufacturing supply chains. Proceedings for Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 605-620. ISSN 2041-2975

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L. (2018) Kinetics of dissolution of glass fibre in hot alkaline solution. Journal of Materials Science, 53. 1710–1722. ISSN 0022-2461

Bylya, Olga I. and Khismatullin, Timur and Blackwell, Paul and Vasin, Rodolf A. (2018) The effect of elasto-plastic properties of materials on their formability by flow forming. Journal of Materials Processing Technology, 252. pp. 34-44. ISSN 0924-0136

Raza, Syed A. and Schacht, Ulrich and Svoboda, Vaclav and Edwards, Darren P. and Florence, Alastair J. and Pulham, Colin R. and Sefcik, Jan and Oswald, Iain D. H. (2018) Rapid continuous antisolvent crystallization of multi-component systems. Crystal Growth and Design, 18 (1). pp. 210-218. ISSN 1528-7483

Trung, Pham Quang and Khun, Nay Win and Butler, David Lee (2018) Effect of shot peening process on the fatigue life of shot peened low alloy steel. Journal of Engineering Materials and Technology, 140 (1). ISSN 0094-4289

Tinsley, Lawrence and Chalk, Christine and Nicholls, John and Mehnen, Jörn and Roy, Rajkumar (2017) A study of pulsed thermography for life assessment of thin EB-PVD TBCs undergoing oxidation ageing. NDT and E International, 92. pp. 67-74. ISSN 0963-8695

Vuletic, Tijana and Whitfield, Robert Ian and Wang, Wenjuan and Duffy, Alex and Gatchell, Scott and Prins, Henk and Leer-Andersen, Michael (2017) Improving the creation and management of collaborative networks within the European maritime sector : an operational collaboration model for the European maritime sector. Journal of Industrial Information Integration, 8. pp. 22-37. ISSN 2452-414X

Bashir, S.T. and Yang, L. and Anderson, R. and Tang, P.L. and Liggat, J.J. and Thomason, J.L. (2017) A simple chemical approach to regenerating the strength of thermally damaged glass fibre. Composites Part A: Applied Science and Manufacturing, 102. pp. 76-87. ISSN 1359-835X

Sirikham, Adisorn and Zhao, Yifan and Mehnen, Jörn (2017) Determination of thermal wave reflection coefficient to better estimate defect depth using pulsed thermography. Infrared Physics and Technology, 86. pp. 1-10. ISSN 1350-4495

Bylja, Olga and Gomez-Gallegos, Ares and Stefani, Nicola and Blackwell, Paul (2017) Al-Li alloys – the analysis of material behaviour during industrial hot forging. Procedia Engineering, 207. pp. 7-12. ISSN 1877-7058

Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058

Huang, Jianglin and Slater, Carl D. and Mandral, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207. pp. 478-483. ISSN 1877-7058

Warzecha, Monika and Safari, Mohammad S. and Florence, Alastair J. and Vekilov, Peter G. (2017) Mesoscopic solute-rich clusters in olanzapine solutions. Crystal Growth and Design. pp. 6668-6676. ISSN 1528-7483

Warzecha, Monika and Guo, Rui and Bhardwaj, Rajni M. and Reutzel-Edens, Susan M. and Price, Sarah L. and Lamprou, Dimitrios A. and Florence, Alastair J. (2017) Direct observation of templated two-step nucleation mechanism during olanzapine hydrate formation. Crystal Growth and Design, 17 (12). pp. 6382-6393. ISSN 1528-7483

Staiano, A. and Ion, W. and O'Hare, L. and Zuelli, N. (2017) Protective coatings for ceramic superplastic forming dies : an initial study on protective coating performance. Materialwissenschaft und Werkstofftechnik, 48 (10). pp. 1009-1016. ISSN 0933-5137

Appleby, Andrew and Conway, Alastair and Ion, William (2017) A novel methodology for in-process monitoring of flow forming. AIP Conference Proceedings, 1896 (1). 080022. ISSN 1551-7616

Morar, Nicolau and Roy, Rajkumar and Mehnen, Jorn and Nicholls, J.R. and Gray, Simon (2017) The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C. International Journal of Fatigue. 112–120. ISSN 0142-1123

Tamimi, Saeed and Sivaswamy, Giribaskar and Violatos, Ioannis and Moturu, Shanmukha Rao and Rahimi, Salah and Blackwell, Paul (2017) Modelling and experimentation of the evolution of texture in an Al-Mg alloy during earing cupping test. Procedia Engineering, 207. pp. 1-6. ISSN 1877-7058

Summan, Rahul and Dobie, Gordon and West, Graeme and Marshall, Stephen and Macleod, Charles and Pierce, Gareth (2017) The influence of the spatial distribution of 2D features on pose estimation for a visual pipe mapping sensor. IEEE Sensors Journal. ISSN 1530-437X

Mourtzis, Dimitris and Vlachou, Eugenia and Tapoglou, Nikolaos and Mehnen, Jorn (2017) A cloud-based knowledge enriched framework for increasing machining efficiency based on machine tool monitoring. Proceedings for Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

S. de Moraes, Lygia and Edwards, Darren and Florence, Alastair J. and Johnston, Andrea and Johnston, Blair F. and Morrison, Catriona A. and Kennedy, Alan R. (2017) Aqueous solubility of organic salts. Investigating trends in a systematic series of 51 crystalline salt forms of methylephedrine. Crystal Growth and Design, 17 (6). pp. 3277-3286. ISSN 1528-7483

Bylja, Olga and Reshetov, Aleksey and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2017) Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys. Procedia Engineering. ISSN 1877-7058 (In Press)

Hay, L. and Duffy, A. H. B. and Whitfield, R. I. (2017) The S-Cycle performance matrix : supporting comprehensive sustainability performance evaluation of technical systems. Systems Engineering, 20 (1). pp. 45-70. ISSN 1520-6858

Halliwell, Rebecca A. and Bhardwaj, Rajni M. and Brown, Cameron and Briggs, Naomi E. B. and Dunn, Jaclyn and Robertson, John and Nordon, Alison and Florence, Alastair J. (2017) Spray drying as a reliable route to produce metastable carbamazepine form IV. Journal of Pharmaceutical Sciences, 106 (7). pp. 1874-1880. ISSN 0022-3549

Campbell, A. and Murray, P. and Yakushina, E. and Marshall, S. and Ion, W. (2017) Automated microstructural analysis of titanium alloys using digital image processing. IOP Conference Series: Materials Science and Engineering, 179 (1). 012011. ISSN 1757-899X

Zhao, Yifan and Mehnen, Jörn and Sirikham, Adisorn and Roy, Rajkumar (2017) A novel defect depth measurement method based on nonlinear system identification for pulsed thermographic inspection. Mechanical Systems and Signal Processing, 85. 382–395. ISSN 0888-3270

Ejim, Louisa N. and Yerdelen, Stephanie and McGlone, Thomas and Onyemelukwe, I and Johnston, Blair and Florence, Alastair J. and Reis, Nuno M. (2017) A factorial approach to understanding the effect of inner geometry of baffled meso-scale tubes on solids suspension and axial dispersion in continuous, oscillatory liquid-solid plug flows. Chemical Engineering Journal, 308. 669–682. ISSN 1385-8947

Krishnamurthy, Bhaskaran and Bylya, Olga and Muir, Lisa and Conway, Alastair and Blackwell, Paul (2017) On the specifics of modelling of rotary forging processes. Computer Methods in Materials Science, 17 (1). pp. 22-29. ISSN 1641-8581

Stefani, Nicola and Bylya, Olga and Reshetov, Aleksey and Blackwell, Paul (2017) On the applicability of JMAK-type models in predicting IN718 microstructural evolution. Computer Methods in Materials Science, 17 (1). pp. 59-68. ISSN 1641-8581

Addepalli, Sri and Roy, Rajkumar and Axinte, Dragoş and Mehnen, Jörn (2017) 'In-situ' inspection technologies : trends in degradation assessment and associated technologies. Procedia CIRP, 59. pp. 35-40. ISSN 2212-8271

Book Section

Konyalioglu, Aziz Kemal and Ates, Aylin and Paton, Steve and Beldek Apaydın, Tuğçe; Thürer, Matthias and Riedel, Ralph and von Cieminski, Gregor and Romero, David, eds. (2024) Understanding coopetition dynamics in manufacturing value networks : a system dynamics based causal loop diagram (CLD) modelling approach. In: Advances in Production Management Systems. IFIP Advances in Information and Communication Technology . Springer, DEU, 19–33. ISBN 978-3-031-71645-4

Otto, Birke and Schiemer, Benjamin and Sminia, Harry and Sydow, Jörg; (2024) Failure as a process : shaping what is worth doing in creative projects. In: Research in the Sociology of Organizations. Research in the Sociology of Organizations . Emerald Publishing Limited. (In Press)

Martinelli, Samuele and Reid, Andrew and Domingo-Roca, Roger and Windmill, James F.C.; (2023) Additive manufacturing of an insect bio-inspired hair acoustic sensor. In: IEEE SENSORS 2023. Proceedings of IEEE Sensors . IEEE, AUT. ISBN 9798350303872

Tzaferis, Konstantinos and Tabatabaeipour, Morteza and Dobie, Gordon and Pierce, Gareth and Papaelias, Mayorkinos and MacLeod, Charles and Gachagan, Anthony; Farhangdoust, Saman and Guemes, Alfredo and Chang, Fu-Kuo, eds. (2023) The effect of complex corrosion profiles on remaining wall thickness quantification using shear horizontal guided waves. In: Structural Health Monitoring 2023. Destech Publications, USA. ISBN 9781605956930

Tamimi, Saeed and Huang, Jianglin; Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot, Régis and Balan, Tudor, eds. (2023) Numerical and experimental investigation of deformation characteristics during high-frequency radial forging of AA7075. In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Springer, FRA, pp. 72-79. ISBN 9783031410239

Krishnamurthy, Bhaskaran and Shitikov, Andrei and Blackwell, Paul and Bylya, Olga; Madej, Lukasz and Sitko, Mateusz and Perzynsk, Konrad, eds. (2023) Influence of mesh in modelling of flow forming process. In: Materials Research Proceedings. UNSPECIFIED, POL, pp. 1583-1592. ISBN 9781644902479

Murphy, Keir N. and Naftaly, Mira and Nordon, Alison and Markl, Daniel; (2022) Analysis of THz scattering of compacted granular materials using THz-TDS. In: 2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, Piscataway, N.J.. ISBN 9781728194271

Kelland, Charlotte Alexandra and Brisco, Ross and Whitfield, Ian; Bohemia, Erik and Buck, Lyndon and Grierson, Hilary, eds. (2022) Students perception of risk : team members contribution within collaborative projects. In: Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022). The Design Society, GBR. ISBN 9781912254163

Watson, Robert and Zhao, Taiyi and Zhang, Dayi and Kamel, Mina and MacLeod, Charles and Dobie, Gordon and Bolton, Gary and Joly, Antoine and Pierce, S. Gareth and Nieto, Juan; Saman, Farhangdoust and Guemes, Alfredo and Chang, Fu-Kuo, eds. (2022) Techniques for contact-based structural health monitoring with multirotor unmanned aerial vehicles. In: Proceedings of the 13th International Workshop on Structural Health Monitoring. Destech Publications, Stanford University, Stanford, CA, pp. 21-28. ISBN 9781605956879

Tzaferis, Konstantinos and Tabatabaeipour, Seyed Morteza and Dobie, Gordon and Pierce, Gareth and Lines, David and MacLeod, Charles Norman and Gachagan, Anthony; Rizzo, Piervincenzo and Milazzo, Alberto, eds. (2022) Dual mode inspection using guided waves and phased array ultrasonics from a single transducer. In: European Workshop on Structural Health Monitoring, EWSHM 2022. Lecture Notes in Civil Engineering, 270 . Springer, ITA, pp. 79-88. ISBN 9783031073229

Wilson, Stephen K. and Duffy, Brian R.; Brutin, David and Sefiane, Khelil, eds. (2022) Mathematical models for the evaporation of sessile droplets. In: Drying of Complex Fluid Drops. Royal Society of Chemistry, London, pp. 47-67. ISBN 9781839161209

Subramanian, Senthilkumar and Hampson, Rory and Zhang, Dayi and Kontis, Konstantinos and Dobie, Gordon and MacLeod, Charles Norman and Son, Jae; (2021) Characterization of a low profile, rapidly deployable, MEMS pressure sensor array for aerodynamic applications. In: AIAA SCITECH Forum 2022. AIAA SCITECH 2022 Forum . American Institute of Aeronautics and Astronautics Inc, AIAA, USA.

Krishnamurthy, Bhaskaran and Bylja, Olga and Watt, Kyle and Conway, Alastair and Tuffs, Martin and Blackwell, Paul; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Instability analysis in incremental rotary forming of tube flanges. In: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Minerals, Metals and Materials Series . Springer, USA, pp. 403-415. ISBN 9783030753818

Kwame, J. S. and Yakushina, E. and Blackwell, P.; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Effect of machining induced microstructure changes on the edge formability of titanium alloys at room temperature. In: Forming the Future. The Minerals, Metals & Materials Series . Springer, USA, pp. 2695-2704. ISBN 9783030753818

Lukacs, Peter and Davis, Geo and Stratoudaki, Theodosia and Williams, Stewart and MacLeod, Charles N. and Gachagan, Anthony; (2021) Remote ultrasonic imaging of a wire arc additive manufactured Ti-6AI-4V component using laser induced phased array. In: 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, GBR, pp. 1-6.

Lin, Xiaosi and Siew, Wah Hoon and Given, Martin and Liggat, John and He, Jinliang; (2021) Influence of octavinyl-polyhedral oligomeric silsesquioxane on the electric treeing resistance of polypropylene. In: 2021 International Conference on Electrical Materials and Power Equipment (ICEMPE). ICEMPE 2021 - 3rd International Conference on Electrical Materials and Power Equipment . IEEE, CHN. ISBN 9781665430692

A.Tweijeer, Mohamed Abdussalam Omar and Chen, Zhen and Dimitrijevic, Branka and Agapiou, Andrew; (2021) A systemic review to identify grand challenges in adopting lean construction. In: 5th CU Construction Conference 2021. Coventry University, GBR, pp. 109-112. ISBN 9781846000614

BAREKA, Ambark Abdulmola S Ali and Chen, Zhen and Agapiou, Andrew and Dimitrijevic, Branka; (2021) A lifecycle social network analysis framework for BIM adoption in major construction projects. In: 5th CU Construction Conference 2021. Coventry University, GBR, pp. 64-71. ISBN 9781846000614

BAREKA, Ambark Abdulmola S Ali and Chen, Zhen and Agapiou, Andrew and Dimitrijevic, Branka; (2021) A text mining approach to trend analysis of research on building information modelling in the Middle East and North Africa. In: 5th CU Construction Conference 2021. Coventry University, GBR, pp. 59-63. ISBN 9781846000614

ZAED, Ozaer Zaed G and Chen, Zhen and Grant, Michael and Dimitrijevic, Branka; (2021) Challenges and solution of BIM integrated architectural education towards construction for excellence. In: 5th CU Construction Conference 2021. Coventry University, GBR, pp. 104-108. ISBN 9781846000614

Watson, Robert J. and Pierce, S. Gareth and Kamel, Mina and Zhang, Dayi and MacLeod, Charles N. and Dobie, Gordon and Bolton, Gary and Dawood, Tariq and Nieto, Juan; Rizzo, Piervincenzo and Milazzo, Alberto, eds. (2021) Deployment of contact-based ultrasonic thickness measurements using over-actuated UAVs. In: European Workshop on Structural Health Monitoring. EWSHM 2020. Lecture Notes in Civil Engineering . Springer International Publishing AG, ITA, pp. 683-694. ISBN 978-3-030-64594-6

Tabatabaeipour, Seyed Morteza and Trushkevych, Oksana and Dobie, Gordon and Edwards, Rachel and MacLeod, Charles Norman and Pierce, Gareth; Rizzo, Piervincenzo and Milazzo, Alberto, eds. (2021) Guided wave based-occupancy grid robotic mapping. In: European Workshop on Structural Health Monitoring. Lecture Notes in Civil Engineering (LNCE) . Springer International Publishing AG, ITA, pp. 267-275. ISBN 978-3-030-64908-1

Butler, David and Woolliams, Peter; Leach, Richard and Carmignato, Simone, eds. (2020) Standards in additive manufacturing. In: Precision Metal Additive Manufacturing. CRC Press, Boca Raton, FL, pp. 133-156. ISBN 9781138347717

Brisco, Ross and Whitfield, Ian and Grierson, Hilary and Howell, Bryan and Unson, Cameron and Matheson, Carly; Grierson, Hilary and Buck, Lyndon and Bohemia, Erik and Bisgaard, Anders and Bang, Anne Louise and Terkildsen, Mette and McElheron, Paul, eds. (2020) Developing an online course in Computer-Supported Collaborative Design (CSCD). In: Proceedings of the 22nd International Conference on Engineering and Product Design Education. The Design Society, DNK. ISBN 978-1-912254-10-1

Reshetov, A. and Stefani, N. and Bylya, O. and Krishnamurthy, B. and Blackwell, P.; Tin, Sammy and Hardy, Mark and Clews, Justin and Cormier, Jonathan and Feng, Qiang and Marcin, John and O'Brien, Chris and Suzuki, Akane, eds. (2020) Aspects of high strain rate industrial forging of Inconel 718. In: Superalloys 2020. The Minerals, Metals & Materials Series . Springer, Cham, Switzerland, 461 - 470. ISBN 978-3-030-51834-9

Smith, Eleanor and Semple, Gordon and Evans, Dorothy and McRae, Kenneth and Blackwell, Paul; Chen, Jessie Y. C. and Fragomeni, Gino, eds. (2020) Augmented instructions : analysis of performance and efficiency of assembly tasks. In: Virtual, Augmented and Mixed Reality. Industrial and Everyday Life Applications. Lecture Notes in Computer Science . Springer, Cham, pp. 166-177. ISBN 978-3-030-49698-2

Mishra, Puneet and Feller, Torsten and Schmuck, Martin and Nicol, Andreas and Nordon, Alison; (2019) Early detection of drought stress in Arabidopsis thaliana utilsing a portable hyperspectral imaging setup. In: 2019 10th Workshop on Hyperspectral Imaging and Signal Processing. IEEE, Piscataway. ISBN 9781728152943

Mishra, Puneet and Schmuck, Martin and Roth, Sina and Nicol, Andreas and Nordon, Alison; (2019) Homogenising and segmenting hyperspectral images of plants and testing chemicals in a high-throughput plant phenotyping setup. In: 2019 10th Workshop on Hyperspectral Imaging and Signal Processing. IEEE, Piscataway. ISBN 9781728152943

Ismail, Zul-Atfi and Motawa, Ibrahim; Gorse, Chris and Neilson, Christopher J, eds. (2019) Integrating CMMS, expert systems and BIM for IBS building maintenance. In: Association of Researchers in Construction Management (ARCOM). Association of Researchers in Construction Management (ARCOM), GBR, pp. 245-254. ISBN 9780995546349

Sminia, Harry and Nair, Anup and Ates, Aylin and Paton, Steve and Smith, Marisa; Sydow, Jörg and Berends, Hans, eds. (2019) The dynamics of interorganizational relations in contemporary manufacturing : nested negotiations in value networks. In: Managing Interorganizational Collaborations. Research in the Sociology of Organizations, 64 . Emerald, Bingley, pp. 69-89. ISBN 9781787565920

Motawa, Ibrahim; Ogunlana, Stephen and Dey, Prastanta Kumar, eds. (2019) Modelling risk effect using Monte Carlo Technique : an application for innovative projects. In: Risk Management in Engineering and Construction. Routledge, Abingdon, Oxon, pp. 20-45. ISBN 9780415480178

Holliman, Alexander 'Freddie' and Thomson, Avril and Hird, Abigail and Wilson, Nicola; (2019) A matter of factor : a proposed method for identifying factors that influence design effort levels in product design. In: Proceedings of the Design Society. Proceedings of the Design Society, 1 . Cambridge University Press (CUP), NLD, pp. 1025-1034.

Omoniyi, O. A. and Tiller, B. and O'Leary, R. and Windmill, James; (2019) Developing a 3D printable electret material for sensing applications. In: 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE, GBR. ISBN 9781538693049

Bolbot, Victor and Trivyza, Nikoletta and Theotokatos, Gerasimos and Boulougouris, Evangelos and Rentizelas, Athanasios and Vassalos, Dracos; (2019) Cruise ship optimal power plants design identification and quantitative safety assessment. In: Proceedings of MOSES 2019 2nd International Conference on Modelling and Optimisation of Ship Energy Systems. University of Strathclyde, GBR, pp. 55-63. ISBN 9781909522510

Ingram, Marcus and Gachagan, Anthony and Mulholland, Anthony J. and Nordon, Alison and Dziewierz, Jerzy and Hegarty, Martin; (2019) Enhanced phased array imaging through reverberating interfaces. In: 45th Annual Review Of Progress In Quantitative Nondestructive Evaluation. AIP Conference Proceedings, 38 . AIP, USA. ISBN 9780735418325

Javadi, Yashar and Vasilev, Momchil and MacLeod, Charles N. and Pierce, Stephen G. and Su, Riliang and Mineo, Carmelo and Dziewierz, Jerzy and Gachagan, Anthony; Laflamme, Simon and Holland, Stephen and Bond, Leonard J., eds. (2019) Intentional weld defect process : from manufacturing by ‎‎robotic welding machine to inspection ‎using TFM phased ‎‎array ‎. In: 45th Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP Conference Proceedings, USA. ISBN 9780735418325

Ali, Ibrahim Labaran and Hird, Abigail and Tanko, Muhammad and Whitfield, Robert Ian; Ortega Riejos, F.A., ed. (2019) SME approach to road transportation risk management : evidence from Nigeria. In: WIT Transactions on The Built Environment. WIT Press, ESP, pp. 39-47. ISBN 9781784663001

Ingram, Marcus and Gachagan, Anthony and Mulholland, Anthony J. and Nordon, Alison and Hegarty, Martin; (2018) Ultrasonic array imaging through reverberating layers for industrial process analysis. In: 2018 IEEE International Ultrasonics Symposium. IEEE, JPN. ISBN 9781538634257

Zhang, Dayi and Watson, Robert and Dobie, Gordon and MacLeod, Charles Norman and Pierce, Gareth; (2018) Autonomous ultrasonic inspection using unmanned aerial vehicle. In: 2018 IEEE International Ultrasonics Symposium (IUS). IEEE, JPN. ISBN 9781538634257

Paparistodimou, Giota and Duffy, Alex and Knight, Philip and Whitfield, Ian and Robb, Malcolm and Voong, Caroline; (2018) Network-based metrics for assessment of naval distributed system architectures. In: 14th International Naval Engineering Conference & Exhibition (INEC) Glasgow, UK, 2 – 4 October 2018. Zenodo, [Geneva].

Cardona, Javier and Ferreira, Carla and Svoboda, Vaclav and Ahmed, Bilal and McGinty, John and Agimelen, Okpeafoh S. and Hamilton, Andrew and Cleary, Alison and Atkinson, Robert and Michie, Craig and Marshall, Stephen and Florence, Alastair J. and Chen, Yi-Chieh and Sefcik, Jan and Andonovic, Ivan and Tachtatzis, Christos; Thorvald, Peter and Case, Keith, eds. (2018) The role of in-line image analysis in the transition to continuous manufacturing in the pharmaceutical industry. In: Advances in Manufacturing Technology XXXII. Advances in Transdisciplinary Engineering . IOS Press, SWE, pp. 27-32. ISBN 978-1-61499-901-0

Ibrahim, Ali Labaran and Hird, Abigail and Whitfield, Robert Ian; (2018) Using LSP network position to share supply chain risk information. In: British Academy of Management Conference Proceedings 2018. British Academy of Management, GBR. ISBN 978-0-9956413-1-0

Hatcher, Gillian and Ion, William and MacLachlan, Ross and Wodehouse, Andrew and Simpson, Barbara and Marlow, Marion; Luria, Sarah R. and Baer, John and Kaufman, James C., eds. (2018) Applied humour in creative product design. In: Creativity and Humour. Explorations in Creativity Research . Elsevier, London, pp. 157-182. ISBN 9780128138021

Gao, Yan and Oterkus, Selda; (2018) Thermomechanical analysis of composites under shock load using peridynamics. In: Proceedings of the Twenty-eighth (2018) International Ocean and Polar Engineering Conference. International Society of Offshore and Polar Engineers, JPN, pp. 442-449. ISBN 9781880653876

Uflewska, Olga and Wong, T.C. and Ward, Michael; (2018) Managing capabilities for research centers in the UK's manufacturing sector : from literature review to a conceptual framework. In: Proceedings of the 2nd European IEOM Paris Conference. IEOM Society International, Southfield, Michigan, pp. 1759-1769. ISBN 9781532359453

Bashir, S. T. and Yang, L. and Liggat, J. J. and Thomason, J. L.; (2018) A simple chemical approach to regenerating strength of thermally damaged glass fibre for reuse in composites. In: ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, GRC. ISBN 9781510896932

Brisco, Ross and Whitfield, R. I. and Grierson, H.; (2018) Modelling the relationship between design activity and computer-supported collaborative design factors. In: International Design Conference - Design 2018. The Design Society, HRV, pp. 193-204. ISBN 9789537738594

Ntovas, Michail and Blackwell, Paul; Brabazon, Dermot and Naher, Sumsun and Ul Ahad, Inam, eds. (2017) A new high and moderate speed servo-hydraulic forging simulator capabilities and process optimization. In: Proceedings of the 20th International ESAFORM Conference on Material Forming. AIP Conference Proceedings, 1896 . AIP Publishing, ISL. ISBN 978-0-7354-1580-5

Reimer, Andreas and Fitzpatrick, Stephen and Luo, Xichun and Zhao, Jie; Markopoulos, Angelos P. and Vosniakos, George-Christopher, eds. (2017) Numerical investigation of mechanical induced stress during precision end milling hardened tool steel. In: Precision Machining IX. Solid State Phenomena . Trans Tech Publications Ltd, GRC, pp. 362-369. ISBN 9783035731996

Tedeschi, Stefano and Emmanouilidis, Christos and Farnsworth, Michael and Mehnen, Jorn and Roy, Rajkumar; Lödding, Hermann, ed. (2017) New threats for old manufacturing problems : secure IoT-enabled monitoring of legacy production machinery. In: Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. Springer-Verlag Berlin Heidelberg, DEU, pp. 391-398. ISBN 9783319669229

Brisco, Ross and Whitfield, Robert and Grierson, Hilary; (2017) The use of social network sites in a global engineering design project. In: Proceedings of the 21th International Conference on Engineering Design (ICED 17). ICED, 9 . The Design Society, CAN, pp. 59-68.

Summan, Rahul and Mathur, Neha and Dobie, Gordon and West, Graeme and Marshall, Stephen and MacLeod, Charles and Mineo, Carmelo and Pierce, Gareth; (2017) A new probe concept for internal pipework inspection. In: Nuclear Plant Instrumentation, Control, and Human-Machine Interface Technologies (NPIC&HMIT 2017). American Nuclear Society, USA. ISBN 9780894487439

Hird, Abigail; (2017) Externalising, sharing and comparing perceptions in design. In: Design Management Academy. Design Management Academy, London, pp. 1361-1371. ISBN 978-1-912294-11-4

Mehnen, Jörn and He, Hongmei and Tedeschi, Stefano and Tapoglou, Nikolaos; Thames, Lane and Schaefer, Dirk, eds. (2017) Practical security aspects of the internet of things. In: Cybersecurity for Industry 4.0. Springer Series in Advanced Manufacturing . Springer International Publishing AG, Cham, pp. 225-242. ISBN 9783319506609

Sminia, Harry; Szabla, David B and Pasmore, William A and Barnes, Mary A and Gipson, Asha N, eds. (2017) Andrew M. Pettigrew : a groundbreaking process scholar. In: The Palgrave Handbook of Organizational Change Thinkers. Palgrave, pp. 1-17. ISBN 9783319498201

Chen, Zhen and Kong, Stephen and Li, Heng and Xu, Qian; (2004) Evaluating IT applications for innovative construction management. In: Proceedings of the International Conference on Computing in Civil and Building Engineering. Bauhaus University, Weimar, DEU.

Kong, Stephen and Li, Heng and Anumba, Chimay and Chen, Zhen; (2004) Implementation of web services to enable interoperability of web-based construction products catalogue. In: Proceedings of the International Conference on Computing in Civil and Building Engineering. Bauhaus University, Weimar, DEU.

Conference or Workshop Item

Martinelli, Samuele and Reid, Andrew and Windmill, James (2024) Development of acoustic & airflow sensors inspired by the hair sensilla of insects and arachnids. In: CENSIS Technology Summit 2024, 2024-11-14 - 2024-11-14.

Walker, Joseph and Mills, Brandon and Javadi, Yashar and Sun, Yongle and Taraphdar, Pradeeptta Kumar and Sillars, Fiona and MacLeod, Charles Norman and Gachagan, Anthony and Pierce, Gareth (2024) Interpass peening impact on residual stress in wire-arc additive manufactured Ti 6Al-4V using phased-array ultrasonic testing. In: ASTM International Conference on Advanced Manufacturing 2024, 2024-10-27 - 2024-11-01, Hilton Atlanta.

Samad, Abdul and Ayub, Ahmad and Siew, WH and Given, Martin and Liggat, John and Timoshkin, Igor (2024) Exploring acoustic emissions for enhanced partial discharge fault diagnosis in cable insulations. In: International Conference on High Voltage Engineering, 2024-08-18 - 2024-08-22, Germany.

McArthur, Stig and McKnight, Shaun and Bomphray, Iain and Mehnen, Jörn (2024) Rework signature : assessing quality of reworked defects in automated fibre placement composites. In: 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05.

Martinelli, Samuele and Reid, Andrew Baxter and Windmill, James F. C. (2024) Bio-Inspired sensor structure based on two materials stiffnesses of scorpion’s trichobothria using additive manufacturing (AM). In: ScotCHEM Polymer and Soft Materials Conference III, 2024-06-13 - 2024-06-14, University of Strathclyde.

Sminia, Harry and Paton, Steven and Ates, Aylin (2023) Linking manufacturing ecosystems theory with servitization : a 'nested' solutions-based approach. In: International Conference on Business Servitization, 2023-11-11 - 2023-11-12.

Martinelli, Samuele and Reid, Andrew Baxter and Domingo-Roca, Roger and Windmill, James F.C. (2023) Additive manufacturing of an insect bio-inspired hair acoustic sensor. In: IEEE Sensors 2023, 2023-10-29 - 2023-11-01, Hilton Vienna Park.

Sminia, Harry and Ates, Aylin and Paton, Steve (2023) Moving on from agile and lean : bringing strategy back in. In: Scotland Manufacturing & Supply Chain Conference and Exhibition, 2023-10-25 - 2023-10-25, SECC.

Gomes, Rylan and Mohseni, Ehsan and Pierce, Gareth and Burnham, Kenneth Charles and MacLeod, Charles Norman and Tunukovic, Vedran and Foster, Euan and O'Hare, Tom and Munro, Gavin (2023) Application of eddy currents for inspection of carbon fibre composites. In: 60th Annual British Conference on NDT, 2023-09-12 - 2023-09-14, Northampton Town Centre Hotel, Northampton, UK.

Javadi, Yashar and Mills, Brandon and Pourrahimian Leilabadi, Parinaz and Nicolson, Ewan and Lotfian, Saeid and Zimermann, Rastislav and Abad, Farhad and Mehmanparast, Ali and MacLeod, Charles and Pierce, Gareth and Lines, David and Brennan, Feargal and Mehnen, Jorn and Gachagan, Anthony (2023) Phased array ultrasonic testing of ‎offshore wind bolted flange ‎connections. In: 50th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2023-07-24 - 2023-07-27, Sheraton Austin Hotel at the Capitol,.

Tunukovic, Vedran and McKnight, Shaun and Mohseni, Ehsan and Pierce, S. Gareth and Pyle, Richard and Duernberger, Euan and Loukas, Charalampos and Vithanage, Randika K.W. and Lines, David and Dobie, Gordon and MacLeod, Charles N. and Cochran, Sandy and O'Hare, Tom (2023) Automated deep learning for defect detection in carbon fibre reinforced plastic composites. In: 50th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2023-07-24 - 2023-07-27, Sheraton Austin Hotel at the Capitol,.

Sweeney, Nina E. and MacLeod, Charles N. and Lines, David and Parke, Simon and Pierce, Stephen G. and Loukas, Charalampos (2023) In-process monitoring and control of multi-pass fusion welding using phased arrays. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Wathavana Vithanage, Randika Kosala and MacLeod, Charles Norman and Pierce, Gareth and Lines, David and Pimentel Espirindio E Silva, Misael and Fitzpatrick, Stephen and Rizwan, Muhammad Khalid and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Otto, Birke and Schiemer, Benjamin and Sminia, Harry and Sydow, Jörg (2023) Flexibility of failure in creative projects? : Insights from music productions and scientific explorations. In: EGOS 2023: 39th Colloquium of the European Group for Organization Studies, 2023-07-06 - 2023-07-08, University of Cagliari.

Sweeney, Nina E. and Lines, David and Nicolson, Ewan and Loukas, Charalampos and Pierce, Stephen G. and Parke, Simon and MacLeod, Charles N. (2023) Towards real-time quantitative monitoring and control of weld pool dimensions using phased array ultrasonics. In: 31st ASNT Research symposium, 2023-06-20 - 2023-06-23, Greater Columbus Convention Centre.

Zimermann, Rastislav and Rizwan, Mohammad Khalid and Loukas, Charalampos and Vasilev, Momchil and Mohseni, Ehsan and Vithanage, Randika K.W. and MacLeod, Charles N. and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2023) Dry-coupled ultrasound phased array inspection of as-built complex geometry metal additive manufactured components. In: 31st ASNT Research symposium, 2023-06-20 - 2023-06-23, Greater Columbus Convention Centre.

Martinelli, Samuele and Reid, Andrew Baxter and Windmill, James (2023) 3D printed acoustic sensor inspired by hair-like structure of insects. In: The Doctoral School Multidisciplinary Symposium (DSMS 2023), 2023-06-14 - 2023-06-16, University of Strathclyde.

Smith, Aaron and Bordos, Ecaterina and Robertson, John and Florence, Alastair (2023) The application of SIFT-MS for examining the degradation of polymers. In: CMAC Summer School, 2023-06-14 - 2023-06-16.

Mohseni, Ehsan and MacLeod, Charles N. and Pierce, S. Gareth and Vithanage, Randika K. W. and Zimermann, Rastislav and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Gachagan, Anthony and Williams, Stewart and Ding, Jialuo (2023) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

Zimermann, Rastislav and Rizwan, Muhammad Khalid and Mohseni, Ehsan and Wathavana Vithanage, Randika Kosala and Loukas, Charalampos and Vasilev, Momchil and Lines, David and MacLeod, Charles Norman and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2023) Towards automated in-process NDE of high-value safety critical components built using metal additive manufacturing. In: BINDT Aerospace Event 2023, 2023-04-25 - 2023-04-26, Technology & Innovation Centre.

Mohseni, Ehsan and Pierce, S. G. and Vithanage, R.W. K. and MacLeod, C. N. and Dobie, G. and McKnight, S. and Tunukovic, V. and McInnes, M. and Hifi, A. and Gomez, R. and Shields, M. and Poole, A. and Pyle, R. and O'Hare, T. and Munro, G. and O'Brien-O'Reilly, J. (2023) Mapping SEARCH capabilities to Spirit AeroSystems NDE and automation demand for composites. In: BINDT Aerospace Event 2023, 2023-04-25 - 2023-04-26, Technology & Innovation Centre.

Tunukovic, Vedran and McKnight, S. and Pierce, S. G. and Mohseni, Ehsan and MacLeod, C. N. and Pyle, R. and Dobie, G. and O'Hare, T. and Munro, G. and O'Brien-O'Reilly, J. (2023) Application of machine learning techniques for defect detection, localisation, and sizing in ultrasonic testing of carbon fibre reinforced polymers. In: BINDT Aerospace Event 2023, 2023-04-25 - 2023-04-26, Technology & Innovation Centre.

Martinelli, Samuele and Windmill, James F.C. and Reid, Andrew (2023) 3D-printed sensor inspired by trichoid sensilla of insects, early studies of the mechanical structure. In: Invertebrate Sound and Vibration 2023, 2022-03-30 - 2023-04-02, University of Lincoln.

Nicolson, Ewan and Mohseni, Ehsan and Sumana, Sumana and Lines, David and Pierce, Gareth and MacLeod, Charles N. (2023) Dual-tandem phased array method for imaging of near-vertical defects in narrow-gap welds. In: ANRC Nuclear Showcase, 2023-02-21 - 2023-02-22.

McKnight, Shaun and MacKinnon, Christopher and Mohseni, Ehsan and Pierce, Gareth and MacLeod, Charles Norman and O'Hare, Tom (2022) Transfer learning for classification of experimental ultrasonic non-destructive testing images from synthetic data. In: IOP Physics Enhancing Machine Learning in Applied Solid Mechanics, 2022-12-12 - 2022-12-12, Institute of Physics.

Tunukovic, Vedran and Lawley, Alistair and McKnight, Shaun and Mohseni, Ehsan and Dobie, Gordon and O'Hare, Tom and MacLeod, Charles Norman and Pierce, Gareth (2022) Automated bounding box annotation for NDT ultrasound defect detection. In: IOP Physics Enhancing Machine Learning in Applied Solid Mechanics, 2022-12-12 - 2022-12-12, Institute of Physics.

Harrison, N A W and Whitfield, R I and Odukoya, K A and Powell, A I (2022) Model-based engineering and the digital thread. In: 16th International Naval Engineering Conference, 2022-11-08 - 2022-11-11, TU Delft.

Sweeney, Nina E. and MacLeod, Charles N. and Pierce, Gareth and Lines, David and Parke, Simon (2022) Towards ultrasound-driven, in-process monitoring & control of GTA welding of multi-pass welds for defect detection & prevention. In: American Society for Non-Destuctive Testing (ASNT) 2022: The Annual Conference, 2022-10-31 - 2022-11-03.

Javadi, Yashar and Hutchison, Alistair and Zimermann, Rastislav and Lotfian, Saeid and Mohseni, Ehsan and Wathavana Vithanage, Randika Kosala and MacLeod, Charles Norman and Pierce, Gareth and Gachagan, Anthony and Mehnen, Jorn (2022) Mechanical stress measurement using phased array ultrasonic system. In: 2022 IEEE International Ultrasonics Symposium, 2022-10-10 - 2022-10-13, Venice Convention Center.

Lin, Xiaosi and Lin, Chuanjie and Siew, Wah Hoon and Liggat, John and Given, Martin and He, Jinliang (2022) The influence of octaphenyl POSS addition on the electro-aging characteristics of polypropylene. In: International Conference on High Voltage Engineering, 2022-09-25 - 2022-09-29, Chongqing.

Moreno, Irene and Boyle, Christopher and Ferreira, Carla and Chen, Yi-Chieh and Brown, Cameron and Tachtatzis, Christos and Andonovic, Ivan and Sefcik, Jan and Cardona, Javier (2022) Deep Learning methods for solid loading prediction from in-line Chord Length Distributions (CLDs). In: Advances in Process Analytics and Control Technologies, 2022-09-14 - 2022-09-16.

Foster, Euan and MacLeod, Charles Norman and Loukas, Charalampos and Vasilev, Momchil and McKnight, Shaun and McInnes, Martin and Gachagan, Anthony and Bolton, Gary and Bernard, Robert and Mohseni, Ehsan (2022) Autonomous and targeted eddy current inspection from UT feature guided wave screening of resistance seam welds. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Mohseni, E. and Pierce, S. G. and Vithanage, R. and Dobie, G. and MacLeod, C. N. and McKnight, S. and Foster, E. and Loukas, C. and McInnes, M. and Gover, H. and Burnham, K. and O'Brien-O'Reilly, J. and Paton, S. and Munro, G. and O'Hare, T. and Grosser, M. (2022) Multi-sensor electromagnetic inspection feasibility for aerospace composites surface defects. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Mohseni, Ehsan and Zimermann, Rastislav and Vithanage, Randika K. W. and Foster, Euan and Vasilev, Momchil and Loukas, Charalampos and Rizwan, Muhammad Khalid and MacDonald, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Gachagan, A. and Williams, Stewart and Ding, Jialuo (2022) Automated multi-modal in-process non-destructive evaluation of wire + arc additive manufacturing. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Rizwan, Muhammad Khalid and Zimermann, Rastislav and Mohseni, Ehsan and Wathavana Vithanage, Randika Kosala and Foster, Euan and Lines, David and MacLeod, Charles Norman and Pierce, Gareth and Gachagan, Anthony (2022) Investigating ultrasound wave propagation through the coupling medium and non-flat surface of wire + arc additive manufactured components inspected by a PAUT roller-probe. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Tabatabaeipour, Morteza and McMillan, Ross and Tzaferis, Konstantinos and Jackson, William and Edwards, Rachel S. and Trushkevych, Oksana and Dobie, Gordon and MacLeod, Charles and Gachagan, Anthony (2022) Non-contact ultrasonic-based Bayesian mapping for robotic structural inspection. In: 59th Annual British Conference on Non-Destructive Testing 2022, 2022-09-06 - 2022-09-08, The International Centre.

Aphirakmethawong, Janjira and Yang, Erfu and Mehnen, Jörn (2022) An overview of artificial intelligence in product design for smart manufacturing. In: The 27th IEEE International Conference on Automation and Computing, 2022-09-01 - 2022-09-03, University of the West of England.

Jackson, William and Zhang, Dayi and McMillan, Ross and Tabatabaeipour, Morteza and Hampson, Rory and Gilmour, Adam and MacLeod, Charles Norman and Dobie, Gordon (2022) Magnetic inspection platform for teleoperated remote inspections of complex geometry. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Foster, Euan and MacLeod, Charles N. and Mohseni, Ehsan and Gachagan, Anthony and Loukas, Charalampos and Vasilev, Momchil and McKnight, Shaun and McInnes, Martin and Lines, David and Gachagan, Anthony and Bolton, Gary and Bernard, Robert (2022) Targeted eddy current inspection based on ultrasonic feature guided wave screening of resistance seam welds. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

McMillan, Ross and Tabatabaeipour, Seyed Morteza and Tzaferis, Konstantinos and Jackson, William and Edwards, Rachel S. and Trushkevych, Oksana and Macleod, Charles and Dobie, Gordon and Gachagan, Anthony (2022) Crawler-based automated non-contact ultrasonic inspection of large structural assets. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Sweeney, Nina E. and MacLeod, Charles N. and Nicolson, Ewan and Lines, David and Parke, Simon and Pierce, Stephen G. (2022) Towards real-time ultrasound driven inspection and control of GTA welding processes for high-value manufacturing. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Vithanage, Randika K. W. and Macleod, Charles and Lines, David and Pimentel, Misael and Fitzpatrick, Stephen and Halavage, Steven and McKegney, Scott and Pierce, Gareth and Williams, Stewart and Ding, Jialuo (2022) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: 49th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2022), 2022-07-25 - 2022-07-27, San Diego, CA.

Javadi, Yashar and Hutchison, Alistair and Zimermann, Rastislav and Lines, David and Sweeney, Nina E. and Vasilev, Momchil and Mohseni, Ehsan and Vithanage, Randika K.W. and MacLeod, Charles N. and Pierce, Gareth and Mehnen, Jorn and Gachagan, Anthony (2022) Development of a phased array ultrasonic system for residual stress measurement in welding and additive manufacturing. In: Pressure Vessels & Piping Conference, 2022-07-17 - 2022-07-22.

Tzaferis, Konstantinos and Tabatabaeipour, Morteza and Dobie, Gordon and Pierce, Stephen G. and Lines, David and MacLeod, Charles N. and Gachagan, Anthony (2022) Dual mode inspection using guided waves and phased array ultrasonics from a single transducer. In: 10th European Workshop on Structural Health Monitoring, 2022-07-04 - 2022-07-07.

Ali, Ibrahim and Whitfield, Robert Ian (2022) Leveraging on collective prosperity for supply chain disruption during Covid-19 lockdown : experience from Nigeria. In: 29th International European Operations Management Association Annual Conference, 2022-07-01 - 2022-07-06.

Abdallah, Nura and Chong, Magdalene and Parrott, Andrew and Ashworth, David and Fletcher, Ashleigh and Nordon, Alison (2022) Characterisation of inclusion complexes using powder X-ray diffraction, and low- and mid-frequency Raman spectroscopy. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Barrera, Maria Cecilia and Josifovic, Aleksander and Robertson, John and Johnston, Blair and Brown, Cameron and Florence, Alastair (2022) Using machine learning to predict residence time distributions in Coiled Flow Inverter (CFI) reactors. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Chong, Magdalene and Brown, Cameron and Mustoe, Chantal and McGinty, John and Li, Wei and Pathan, Momina and Ottoboni, Sara and Prasad, Elke and Robertson, Murray and Mehta, Bhavik and McGowan, Mark and Siddique, Humera and Raval, Vishal and Pereira Diaz, Laura and Siddique, Mariam and Eales, William and Turner, Alice and Johnston, Blair and Robertson, John and Halbert, Gavin and Price, Chris and Benyahia, Brahim and Rielly, Chris and Sefcik, Jan and Nordon, Alison and McGlone, Thomas and Smith, Kenneth and Feilden, Helen and Houson, Ian and Florence, Alastair (2022) The CMAC MicroFactory : mefenamic acid. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Chong, Magdalene and Li, Wei and Brown, Cameron and McGinty, John and Robertson, Murray and Johnston, Blair and Sefcik, Jan and Benyahia, Brahim and Rielly, Chris and Nordon, Alison (2022) A structured approach to implementation of measurements : crystallisation in the mefenamic acid MicroFactory. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Creswick, Jack and Raval, Vishal and Florence, Alastair and Markl, Daniel (2022) Understanding the effect of spherical agglomeration on tablet manufacturability and performance. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Johnston, Jenna and Brown, Cameron and Florence, Alastair (2022) Mechanistic model development of α-lactose monohydrate crystallisation. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Josifovic, Aleksander and Barrera, Maria and Brown, Cameron and Johnston, Blair and Robertson, John and Florence, Alastair (2022) In-line process reactor test bed & sensor development. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Murphy, Keir N. and Naftay, Mira and Nordon, Alison and Markl, Daniel (2022) Non-destructive estimation of particle size in powder compacts. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Mustoe, Chantal and Brown, Cameron and Markl, Daniel and Houson, Ian and Feilden, Helen and Robertson, Murray and Florence, Alastair (2022) The CMAC quality by digital design workflow. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Mustoe, Chantal and Pickles, Thomas and Brown, Cameron and Florence, Alastair (2022) Towards an autonomous DataFactory for the small-batch cooling crystallisation of active pharmaceutical ingredients. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Nakapraves, Siya and Warzecha, Monika and Mustoe, Chantal and Florence, Alastair J. (2022) Prediction of mefenamic acid crystal shape by random forest classification. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Pathan, Momina and McGinty, John and Chong, Magdalene W. S. and Robertson, Murray and Ottoboni, Sara and Li, Wei and McGowan, Mark and Ojo, Ebenezer and Anwar, Ali and Brown, Cameron J. and Sefcik, Jan and Nordon, Alison and Johnston, Blair and Price, Chris J. and Rielly, Chris D. and Benyahia, Brahim and Houson, Ian and Florence, Alastair J (2022) Crystallisation MicroFactory test bed. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Pereira-Diaz, Laura and Brown, Cameron J. and Florence, Alastair J. (2022) Prediction of powder flow of pharmaceutical materials using machine learning. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Pickles, Thomas and Mustoe, Chantal and Brown, Cameron and Florence, Alastair (2022) Developing an autonomous DataFactory workflow for smallscale batch cooling crystallisation with the antiviral lamivudine. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Raval, Vishal and McGowan, Mark and Smith, Kenneth and Florence, Alastair (2022) Particle engineering-size controlled spherical agglomeration of benzoic acid. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Siddique, H. and Hamilton, N. and Robertson, M. and Warzecha, M. and Smith, K. and Brown, C. and Johnston, B. and Florence, A. J. and Douieb, S. and Hadjittofis, E. and Assaf, G. and Carly, N. and Pasha, M. and Cocchini, U. and Mantanus, J. (2022) A crystallisation development workflow for the manufacturability improvement of active pharmaceutical ingredients. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Srirambhatla, Vijay K and Johnston, Blair and Florence, Alastair (2022) Machine learning workflows to predict crystallisability, glass forming ability, mechanical properties of small organic compounds. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Tanveer, Saadia and Oswald, Iain D. H. and Florence, Alastair J. (2022) Discovery and applications of a novel solid-state arrangement : water bridge salt form. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Vassileiou, Antony D. and Robertson, Murray N. and Wareham, Bruce G. and Soundaranathan, Mithushan and Ottoboni, Sara and Florence, Alastair J. and Hartwig, Thoralf and Johnston, Blair F. (2022) A unified AI framework for solubility prediction across organic solvents. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Vivattanaseth, Pattavet and Chong, Magdalene and Prasad, Elke and Halbert, Gavin and Robertson, John and McFarlan, Catriona and Nordon, Alison (2022) Application of multivariate curve resolution to in situ THz - Raman spectroscopy of amorphous solid dispersions in pharmaceutical products. In: CMAC Annual Open Day 2022, 2022-05-16 - 2022-05-18.

Javadi, Yashar and Hutchison, Alistair and Singh, Jonathan and Mohseni, Ehsan and Rahimi, Salah and Mehnen, Jorn and MacLeod, Charles Norman and Pierce, Gareth and Tant, Katherine Margaret Mary and Gachagan, Anthony (2022) Feasibility study of residual stress measurement using phased ‎array ultrasonic method. In: 11th International Conference on Residual Stress, 2022-03-27 - 2022-03-30, Centre Prouve.

Odukoya, Adebowale and Whitfield, Ian and Hay, Laura and Harrison, Neil and Robb, Malcolm (2021) An architectural description for the application of MBSE in complex systems. In: 7th IEEE International Symposium on Systems Engineering, 2021-09-13 - 2021-10-13, Virtual.

Ates, Aylin and Sminia, Harry and Paton, Steve and Smith, Marisa and Wurth, Bernd (2021) Bridging differing perspectives on ecosystems research : towards an integrative framework. In: 35th Annual Conference of the British Academy of Management, 2021-08-31 - 2021-09-03, Online.

Srinual, Napat and Mehnen, Jorn and Boonraksa, Nantawan (2021) A review of sustainable supplier selection and evaluation using topic modelling. In: The 8th HCU National and International Conference, 2021-06-25 - 2021-06-25, E-Conference hosted by Huachiew Chalermprakiet University, Bangphli District.

Zhang, Dayi and Watson, Robert and Cao, Jianlin and Zhao, Taiyi and Dobie, Gordon and MacLeod, Charles and Pierce, Gareth (2020) Dry-coupled airborne ultrasonic inspection using coded excitation. In: 2020 IEEE International Ultrasonics Symposium: IEEE UFFC, 2020-09-06 - 2020-09-11.

Ojo, Ebenezer and Osman, Musab and Mnemo, Mitchelle and Anwar, Ali and Houson, Ian and O'Meahdra, Ruairi and Berthold, Schenkel and Florence, Alastair (2020) Multistage, multi-zones antisolvent-cooling crystallisation of a proprietary API : experimental comparison of effect of geometry and hydrodynamics in four batch crystallisers. In: CMAC Annual Open Day, 2020-10-21 - 2020-10-22, Virtual event.

Mohseni, Ehsan and Vithanage, Randika and Qiu, Zhen and Javadi, Yashar and Vasilev, Momchil and MacLeod, Charles N. and Lines, David and Zimermann, Rastislav and Pierce, Stephen G. and Gachagan, Anthony and Ding, Jialuo and Williams, Stewart (2020) Laser-assisted surface adaptive ultrasound (SAUL) inspection of samples with complex surface profiles using a phased array roller-probe. In: NDT2020: 59th Annual British Conference on Non-Destructive Testing, 2020-09-15 - 2020-09-17, Park Inn by Radisson Hotel.

Foster, Euan and MacLeod, Charles N. and Gachagan, Anthony and Bolton, Gary and Bernard, Robert (2020) Inspection of nuclear assets with limited access. In: BINDT 2020- 59th Annual conference, 2020-09-15 - 2020-09-18, Online Webinar.

Olisah, Moses Chijioke and Nwankpa, Chigozie and Whitfield, Ian and Ion, William (2020) The exploration of collaborative supply chain factors in the oil and gas industry. In: BAM 2020: 34th Annual Conference of the British Academy of Management, 2020-09-02 - 2020-09-04, Cloud.

Mohseni, Ehsan and Wathavana Vithanage, Randika Kosala and Qiu, Zhen and MacLeod, Charles Norman and Javadi, Yashar and Lines, David and Zimermann, Rastislav and Pierce, Gareth and Gachagan, Anthony and Ding, Jialuo and Williams, Stewart (2020) A high temperature phased array ultrasonic roller probe designed for dry-coupled in-process inspection of wire + arc additive manufacturing. In: 47th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2020-08-25 - 2020-08-26, Virtual event.

Lines, David and Mohseni, Ehsan and Zimermann, Rastislav and Mineo, Carmelo and MacLeod, Charles Norman and Pierce, Gareth and Gachagan, Anthony (2020) Modelling of echo amplitude fidelity for transducer bandwidth and TFM pixel resolution. In: 47th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2020-08-25 - 2020-08-26, Virtual event.

Uba, Salisu Alhaji and Whitfield, Ian (2020) Exploring the adoption of blockchain technology in the oil and gas industry supply chain : a unified theory of acceptance and use of technology model approach. In: 27th EurOMA Conference, 2020-06-28 - 2020-06-30, University of Warwick.

Pooripanyakun, Munyaporn and Wodehouse, Andrew and Mehnen, Jorn (2020) The effect of time pressure on the performance of dexterous operations. In: 16th International Design Conference 2020, 2020-10-26 - 2020-10-29.

Piotrowska, Roxana and Hesketh, Travis and Wang, Haozhen and Martin, Alan R. G. and Bowering, Deborah and Zhang, Chunqiu and Hu, Chunhua T. and McPhee, Scott and Wang, Tong and Park, Yaewon and Singla, Pulkit and McGlone, Thomas and Florence, Alastair and Tuttle, Tell and Ulijn, Rein V. and Chen, Xi (2020) Humidity responsive tripeptide crystals. In: Virtual Symposium: Systems Chemistry, 2020-05-18 - 2020-05-20, Advanced Science Research Center, City University New York.

Foster, Euan and MacLeod, Charles (2020) Inspection of nuclear assets with limited access. In: Scottish Ultrasound Annual Scientific Meeting 2020, 2020-02-28 - 2020-02-28, University of Strathclyde.

Tamimi, S. and Moturu, S. and Amirkhiz, B. S. and Sivaswamy, G. and Parameswaran, E. and Blackwell, P. (2020) Formability of AA-7075 sheets subjected to repetitive bending under tension. In: International Conference on Plasticity, Damage & Fracture, 2020-01-03 - 2020-01-09, Barcelo Maya Grand Resort.

Cosentino, Mel and Schwarzbach, Patrick and Tougaard, Jakob and Nairn, David and Guarato, Francesco and Jackson, Joseph and Windmill, James F.C. (2019) D-PorCCA, a new tool to study the behaviour of harbour porpoises. In: World Marine Mammal Conference, 2019-12-07 - 2019-12-12.

Ojo, E. and Rayat, ACME. and Brown, C. and Price, C. and Hoare, M. and Florence, A. and Johnston, Andrea (2019) Quality by design approach for early understanding of active pharmaceutical ingredient recovery process through dead-end filtration. In: The American Association of Pharmaceutical Scientists (AAPS) 2019 PharmaSci 360, 2019-11-03 - 2019-11-06, Henry B. Gonzalez Convention Center.

Mohseni, Ehsan and Javadi, Yashar and Lines, David and Wathavana Vithanage, Randika Kosala and Foster, Euan and Qiu, Zhen and Zimermann, Rastislav and MacLeod, Charles Norman and Pierce, Stephen and Gachagan, Anthony and Marinelli, Gianrocco and Ding, Jialuo and Williams, Stewart (2019) Ultrasonic phased array inspection of wire plus arc additive manufactured (WAAM) titanium samples. In: 58th Annual British Conference on Non-Destructive Testing, 2019-11-03 - 2019-11-05, Telford, UK.

Ojo, E. and Siddique, H. and Houson, I. and Brown, C. and O'Meahdra, R. and Berthold, S. and Florence, A. (2019) Enabling model-predictive design : rapid development of a PBM for an anti-solvent and cooling crystallisation in two different reactor geometries. In: American Association of Pharmaceutical Scientists PharmSci 360, 2019, 2019-11-03 - 2019-11-07.

Lines, David and Mohseni, Ehsan and Javadi, Yashar and Mineo, Carmelo and Wathavana Vithanage, Randika Kosala and Qiu, Zhen and MacLeod, Charles Norman and Pierce, Gareth and Gachagan, Anthony (2019) Using coded excitation to maintain signal to noise for FMC+TFM on attenuating materials. In: 2019 IEEE International Ultrasonics Symposium, 2019-10-06 - 2019-10-09, SECC.

Zhang, Dayi and Watson, Robert and Dobie, Gordon and MacLeod, Charles and Lines, David and Galbraith, Walter and Mineo, Carmelo and Pierce, Gareth (2019) Evaluation of coded excitations for autonomous airborne ultrasonic inspection. In: 2019 IEEE International Ultrasonics Symposium, 2019-10-06 - 2019-10-09, SECC.

Ward, Michael and Godsell, Janet (2019) Exploring the feasibility of anchoring innovation by enhancing the linkage between manufacturing research networks and supply chains. In: 23rd Cambridge International Manufacturing Symposium 2019, 2019-09-26 - 2019-09-27, Churchill College.

Whitfield, R.I. and Duffy, A.H.B. and Grierson, H. (2019) Delivering a total engineering education. In: 21st International Conference on Engineering & Product Design Education (E&PDE 2019), 2019-09-11 - 2019-09-13, University of Strathclyde.

Lines, David I and Javadi, Yashar and Mohseni, Ehsan and Vasilev, Momchil and MacLeod, Charles N and Vithanage, Randika W and Qiu, Zhen and Zimermann, Rastislav and Loukas, Charalampos and Foster, Euan and Pierce, S Gareth and Gachagan, Anthony (2019) Flexible robotic cell for in-process inspection of multi-pass welds. In: NDT2019, 2019-09-02 - 2019-09-05, The International Centre.

Nair, Anup and Sminia, Harry (2019) Subsidiary strategy process : autonomy, distinctiveness, competitive advantage and performance. In: BAM 2019: 33rd Annual Conference of the British Academy of Management, 2019-09-03 - 2019-09-05, Aston University.

Javadi, Yashar and MacLeod, Charles and Lines, David and Vasilev, Momchil and Mohseni, Ehsan and Foster, Euan and Qiu, Zhen and Vithanage, Randika and Zimermann, Rastislav and Loukas, Charalampos and Pierce, Gareth and Gachagan, Anthony (2019) In-process inspection of multi-pass robotic welding. In: 46th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2019-07-14 - 2019-07-18, Portland.

Fuchigami, HY and Barbosa, LQ and Severino, MR and Rentizelas, A and Tuni, A (2019) A decision support model for assisting smallholder farmers on bidding to supply to institutional markets. In: 25th International Joint Conference on Industrial Engineering and Operations Management, 2019-07-15 - 2019-07-17.

Rentizelas, A and Fuchigami, H Y and Tuni, A and Severino, M R and Melo, I C (2019) Supporting product distribution decisions of smallholder farmers. In: 25th International Joint Conference on Industrial Engineering and Operations Management, 2019-07-15 - 2019-07-17.

Rentizelas, A and Trivyza, NL and Lichtenegger, G (2019) Reverse logistics optimisation model for end-of-life wind turbine blades waste composites. In: 25th International Joint Conference on Industrial Engineering and Operations Management, 2019-07-15 - 2019-07-17.

Mohseni, Ehsan and MacLeod, Charles and Javadi, Yashar and Qiu, Zhen and Vithanage, Randika and Lines, David and Zimermann, Rastislav and Pierce, Gareth and Gachagan, Anthony (2019) A model-based study of transmit-receive longitudinal arrays for inspection of subsurface defects. In: 46th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2019-07-14 - 2019-07-18, Portland.

Ojo, E.O. and Rayat, A. and Price, C.J. and Brown, C.J. and Hoare, M. and Johnston, A. and Florence, A.J. (2019) Unconventional ultra scale-down techniques for active pharmaceutical ingredient filtration and size reduction. In: 50th Annual Conference of the British Association of Crystal Growth, 2019-07-09 - 2019-07-11.

Ojo, Ebenezer and Hosni, Zied and Onyemelukwe, Iyke and Ramakers, Lennart and Houson, Ian and Florence, Alastair (2019) Developing process understanding for continuous manufacturing of Lamivudine (Epivir®) Stable Form I. In: 50th Annual Conference of the British Association of Crystal Growth, 2019-07-09 - 2019-07-11.

Polyzois, H. and Guo, R. and Warzecha, M. and Price, S. L . and Florence, A.J. (2019) Oxcarbazepine form III : observation of twisted habit in crystals of an elusive pharmaceutical polymorph. In: 50th Annual Conference of the British Association of Crystal Growth, 2019-07-09 - 2019-07-11.

Nair, Anup and Sminia, Harry (2019) Confronting digital disruption : how organizational dynamics shape response strategies in incumbent firms. In: 35th EGOS Colloquium, 2019-07-04 - 2019-07-06, University of Edinburgh.

Nocera Alves Junior, Paulo and Costa Melo, Isotilia and Severino, Maico Roris and Yamanaka, Lie and Tuni, Andrea and Rentizelas, Athanasios (2019) Supporting decisions of smallholder farmers on public calls participation in Brazil : a Data Envelopment Analysis approach. In: 30th European Conference on Operational Research, 2019-06-23 - 2019-06-26.

Polyzois, H. and Guo, R. and Warzecha, M. and Price, S. L. and Florence, A. (2019) Polymorph screening studies of oxcarbazepine : twisted habit in crystals of the elusive form III. In: Gordon Research Conference on Crystal Growth and Assembly, 2019-06-23 - 2019-06-28, Southern New Hampshire University in Manchester.

Mahmood, Khalid and Ijomah, Winifred and Windmill, James (2019) Parametric costing model for design-to-cost remanufacturing in radar systems. In: Faculty of Engineering DTC Workshop 2019, 2019-04-02, University of Strathclyde.

Trivyza, Nikoletta and Theotokatos, Gerasimos and Rentizelas, Athanasios (2019) EEDI versus lifecycle CO2 emissions – Is it time for a more realistic policy? In: 2nd International Conference on Modelling and Optimisation of Ship Energy Systems, 2019-05-08 - 2019-05-10.

Doerr, Frederik and Florence, Alastair (2019) Nanofocused X-ray tomography and image processing for quantitative analysis of pharmaceutical particulate solid products. In: International Congress on Particle Technology, 2019-04-09 - 2019-04-11.

Ali, Ibrahim Labaran and Hird, Abigail and Whitfield, Robert Ian (2018) Enhancing supply chain resilience through risk information sharing : a triadic perspective. In: 8th International Conference on Operations and Supply Chain Management, 2018-09-09 - 2018-09-12, Cranfield University.

Javadi, Yashar and MacLeod, Charles Norman and Pierce, Stephen and Gachagan, Anthony and Kerr, William and Ding, Jialuo and Williams, Stewart and Vasilev, Momchil and Su, Riliang and Mineo, Carmelo and Dziewierz, Jerzy (2018) Ultrasonic phased array inspection of wire plus arc additive manufacture ‎‎(WAAM) samples using conventional and total focusing method (TFM) ‎imaging approaches. In: 57th The British Institue of Non-destructive Testing Annual Conference, 2018-09-10 - 2018-09-12, East Midlands Conference Centre and Orchard Hotel.

Onyeiwu, Chimaeze and Hird, Abigail (2018) Innovative approach to variation mapping in craft-based textile manufacturing. In: International Conference on Manufacturing Research, 2018-09-11 - 2018-09-13.

Mineo, Carmelo and Vasilev, Momchil and MacLeod, Charles N. and Su, Riliang and Pierce, S. Gareth (2018) Enabling robotic adaptive behaviour capabilities for new industry 4.0 automated quality inspection paradigms. In: 57th Annual British Conference on Non-Destructive Testing, 2018-09-10 - 2018-09-12, East Midlands Conference Centre and Orchard Hotel.

Jónasdóttir, Hanna and Dhanani, Karishma and McRae, Kenneth and Mehnen, Jörn (2018) Upgrading legacy equipment to industry 4.0 through a cyber-physical interface. In: Advances in Production Management Systems 2018, 2018-08-26 - 2018-08-30, Seoul National University.

McPike, Ruaraidh and Heath, Mike and Grinfeld, Michael and Wolfram, Marie-Therese (2018) On a mean field game formulation of fish stock exploitation. In: National Meeting of the Portuguese Mathematical Society, 2018-07-09 - 2018-07-11, Polytechnic Institute of Bragança.

Zabalza, Jaime and Fei, Zixiang and Wong, Cuebong and Yan, Yijun and Mineo, Carmelo and Yang, Erfu and Rodden, Tony and Mehnen, Jorn and Pham, Quang-Cuong and Ren, Jinchang (2018) Making industrial robots smarter with adaptive reasoning and autonomous thinking for real-time tasks in dynamic environments : a case study. In: The 9th International Conference on Brain-Inspired Cognitive System, 2018-07-07 - 2018-07-08, Guangcheng Hotel.

Ali, Ibrahim Labaran and Hird, Abigail and Whitfield, Robert Ian (2018) Social relationships and supply chain risk information sharing. In: 25th International Annual EurOMA Conference, 2018-06-24 - 2018-06-27.

Holliman, Alexander and Thomson, Avril and Hird, Abigail (2018) Planning product design & development : resource-influencing factors based on experience. In: 25th International Annual EurOMA Conference, 2018-06-24 - 2018-06-27.

Trivyza, Nikoletta L. and Rentizelas, Athanasios and Theotokatos, Gerasimos (2018) Environmental and economic sustainability assessment of emerging cruise ship energy system technologies. In: ECOS 2018, 2018-06-17 - 2018-06-22.

Ahmed, Bilal and Svoboda, Vaclav and Agimelen, Okpeafoh and Cardona, Javier and Dziewierz, Jerzy and Brown, Cameron and McGlone, Thomas and Cleary, Alison and Tachtatzis, Christos and Michie, Craig and Florence, Alastair J. and Andonovic, Ivan and Mulholland, Anthony and Sefcik, Jan (2018) Monitoring API crystal breakage in wet milling using inline imaging and chord length distribution measurements. In: 8th World Congress on Particle Technology, 2018-04-22 - 2018-04-26, Orlando World Center Marriott.

Doerr, Frederik and Florence, Alastair and Oswald, Iain (2018) A rational single particle design approach using an acoustic levitation system and X-ray tomography. In: 8th World Congress on Particle Technology, 2018-04-22 - 2018-04-26, Orlando World Center Marriott.

Doerr, Frederik J. S. and Florence, Alastair J. (2018) XRT : Extraction of quantitative structural descriptors from solid pharmaceutical products. In: Bruker Micro-CT User Meeting, 2018-04-16 - 2018-04-19.

Whitfield, Robert and Brisco, Ross (2018) Workshop session: mapping success in collaborative engineering. In: 15th International Design Conference (Design 2018), 2018-05-21 - 2018-05-24, Hotel Dubrovnik Palace. (In Press)

Tuni, Andrea and Rentizelas, Athanasios (2018) Measuring eco-intensity in an multi-tier food supply chain : a case study. In: 5th EurOMA Sustainable Operations and Supply Chains Forum (SOSCF), 2018-03-05 - 2018-03-06.

Turner, Alice J. and Halbert, Gavin W. and Florence, Alastair J. (2018) Inkjet printing of oral dosage forms to solubilize BCS Class II drugs. In: Sci Formulation Forum, 2018-01-17 - 2018-01-18.

Wood, Sarahjane and Halbert, Gavin and Florence, Alastair (2018) Injection moulding- A novel method of solid oral dosage form manufacturing. In: Sci Formulation Forum, 2018-01-17 - 2018-01-18.

Turner, A. and Halbert, G. and Florence, A. (2017) Inkjet printing scalable dosage forms capable of increasing the solubility of BCS Class II drugs. In: AAPS Annual Meeting and Exposition 2017, 2017-11-12 - 2017-11-15, San Diego Convention Center.

Siddiqi, Muftooh UR and Ijomah, Winifred L. and Dobie, Gordon I. and Hafeez, Muthair and Pierce, S. Gareth and Ion, William and Mineo, Carmelo and MacLeod, Charles N. (2017) Low cost three-dimensional virtual model construction for remanufacturing industry. In: International Conference on Remanufacturing, 2017-10-24 - 2017-10-26.

Wood, Sarahjane and Halbert, Gavin and Florence, Alastair (2017) Solid oral dosage form manufacturing using injection moulding. In: C-SOPS Fall 2017 Industry Meeting, 2017-10-16 - 2017-10-17, Busch Campus, Rutgers University.

Mineo, Carmelo and Summan, Rahul and Riise, Jonathan and MacLeod, Charles N. and Pierce, S. Gareth (2017) Introducing a new method for efficient visualization of complex shape 3D ultrasonic phased-array C-scans. In: 2017 IEEE International Ultrasonics Symposium, IUS 2017, 2017-09-06 - 2017-09-09.

Kuppusamy, N. and Whitfield, R. I. and Hird, A. and Brown, S. and McCubbin, C. and McCubbin, P. (2017) Using systems engineering to develop a novel manufacturing cost model. In: 15th International Conference on Manufacturing Research, 2017-09-05 - 2017-09-07, University of Greenwich.

McKendry, D.A. and Whitfield, R.I. and Duffy, A.H.B. (2017) Key findings to support the development of a framework for the implementation of Product Lifecycle Management in Engineer to Order products. In: 15th International Conference on Manufacturing Research, 2017-09-05 - 2017-09-07, University of Greenwich.

Brisco, Ross and Howell, Bryan and Whitfield, Robert and Thomson, Avril and Evans, Dorothy and Ion, William (2017) Workshop session : collaborative design education. In: 21st International Conference on Engineering Design (ICED17), 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Heredia Jimenez, Juan Antonio and Whitfield, Robert and Ward, Michael and Grierson, Hilary (2017) The development of a novel standardisation-customisation continuum. In: 21st International Conference on Engineering Design (ICED17), 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Thomson, Avril and Whitfield, Ian and Brisco, Ross (2017) Workshop session : the changing innovation landscape: challenges for collaboration design. In: 21st International Conference on Engineering Design (ICED17), 2017-08-21 - 2017-08-25, The University of British Columbia, Vancouver, BC, Canada..

Summan, Rahul and Jackson, William and Dobie, Gordon and MacLeod, Charles Norman and Mineo, Carmelo and West, Graeme and Offin, Douglas and Bolton, Gary and Marshall, Stephen and Lille, Alexander (2017) A novel visual pipework inspection system. In: QNDE 2017, 2016-07-16 - 2017-07-21.

Ojo, Ebenezer and Rayat, Andrea and Johnston, Andrea and Price, Chris John and Price, Chris and Florence, Alastair and Hoare, Mike (2017) Process development for recovery of crystals using DoE. In: British Association of Crystal Growth 50th Annual Conference, 2019-07-09 - 2019-07-11, Sussex Place.

Tuni, Andrea and Rentizelas, Athanasios (2017) Benchmarking the environmental performance of supply chains through eco-intensity. In: 24th EUROMA, 2017-07-01 - 2017-07-05.

Warzecha, Monika and Vekilov, Peter G. and Florence, Alastair (2017) The solute-rich mesoscopic precursors of crystal nuclei of olanzapine solid forms. In: 48th BACG Annual Conference, 2017-06-27 - 2017-06-30, University of Manchester.

Onyeiwu, Chimaeze and Yang, Erfu and Rodden, Tony and Yan, Xiu-Tian and Zante, Remi C and Ion, William (2017) In-process monitoring and quality control of hot forging processes towards Industry 4.0. In: Industrial Systems in the Digital Age Conference 2017, 2017-06-20 - 2017-06-21, University of Glasgow.

Doerr, Frederik and Brammer, Elanor and Wood, Sarahjane and Halbert, Gavin and Florence, Alastair (2017) Morphological characterisation of solid pharmaceutical products using X-ray tomography. In: Bruker micro-CT User Meeting, 2017-06-12 - 2017-06-15.

Uflewska, Olga and Wong, TC and Ward, Michael (2017) Development of technology maturity framework in managing manufacturing improvement for innovation providers. In: 24th Innovation and Product Development Management Conference, 2017-06-11 - 2017-06-13, Reykjavik University.

Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2017) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: Strath Wide Researcher Conference 2017, 2017-05-30 - 2017-05-30, Strathclyde.

McFarlan, Catriona and Nordon, Alison and Dunn, Jaclyn and Speed, Jonathon (2017) Use of a novel mid-infrared spectrometer for in situ analysis of liquids. In: EuroPACT 2017, 2017-05-10 - 2017-05-12, Potsdam, Germany.

Wood, Sarahjane and Halbert, Gavin and Florence, Alastair (2017) Solid oral dosage form manufacturing using injection moulding. In: CMAC Annual Open Day 2017, 2017-03-23 - 2017-03-24, Technology and Innovation Centre, University of Strathclyde.

Darwish Al Balushi, Ahmed and Rentizelas, Athanasios and Lopes de Sousa Jabbour, Ana Beatriz and Tuni, Andrea (2017) Introducing social sustainability aspects in supplier selection : the role of governmental intervention. In: 4th International EurOMA Sustainable Operations and Supply Chains Forum, 2017-02-27 - 2017-02-28, Politecnico di Milano.

Trivyza, Nikoletta L and Rentizelas, Athanasios and Theotokatos, Gerasimos (2017) Sustainability assessment of ship energy systems at the design phase : integrating environmental and economic aspects. In: 4th International EurOMA Sustainable Operations and Supply Chains Forum, 2017-02-27 - 2017-02-28, Politecnico di Milano.

Tuni, Andrea and Rentizelas, Athanasios (2017) Measuring the eco-intensity of the supply chain : a novel approach. In: 4th International EurOMA Sustainable Operations and Supply Chains Forum, 2017-02-27 - 2017-02-28, Politecnico di Milano.

Trivyza, N.L. and Rentizelas, A. and Theotokatos, G. (2016) The influence of ship operational profile in the sustainability of ship energy systems. In: International Conference of Maritime Safety and Operations 2016, 2016-10-13 - 2016-10-14, University of Strathclyde.

Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2016) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07, Russian Federation.

Ates, Aylin (2016) Joining forces in manufacturing value chains for collaborative R&D and innovation : an SME perspective. In: 5th World Conference on Production and Operations Management P&OM, 2016-09-06 - 2016-09-10, Havana International Conference Centre.

Book

Sminia, Harry (2021) The Strategic Manager : Understanding Strategy in Practice. Routledge, [S.I.]. ISBN 9781003031260

Sminia, Harry (2017) The Strategic Manager. Routledge, Abingdon. ISBN 978-0415785846

Report

Ward, Michael and Allwood, Julian M. and Azevedo, Jose and Cleaver, Christopher and Cullen, Jonathan and Dunant, Cyrille and Fellin, Teppo and Hawkins, William and Horrocks, Ian and Horton, Phillipa and Ibell, Tim and Lin, Jianguo and Low, Hamish and Lupton, Rick and Murray, James and Clare, Adam and Salamati, Mohammad Reza and Cabrera Serrenho, Andre and Zhou, Wenbin (2019) Absolute Zero : Delivering the UK's climate Change Commitment with Incremental Changes to Today's Technologies. University of Cambridge, Cambridge.