Items where subject is "Mining engineering. Metallurgy"

2024

Dehghan, Arash and Emadi, Rahmatollah and Asghari, Yunes and Emadi, Hosein and Lotfian, Saeid (2024) Enhancing the mechanical properties of transient-liquid-phase bonded Inconel 617 to stainless steel 310 through altering process parameters and homogenisation. Journal of Manufacturing and Materials Processing, 8 (4). 143. ISSN 2504-4494

Igwemezie, Victor and Mehmanparast, Ali and Ganguly, Supriyo (2024) Assessment of fatigue crack growth resistance of newly developed LTT alloy composition for the repair of high strength steel structures. Journal of Advanced Joining Processes, 10. 100226. ISSN 2666-3309

Sword, J. Iain and Galloway, Alexander and Toumpis, Athanasios (2024) Analysis of environmental impact and mechanical properties of Inconel 625 produced using wire arc additive manufacturing. Sustainability, 16 (10). 4178. ISSN 2071-1050

Sword, J. Iain and Galloway, Alexander and Toumpis, Athanasios (2024) The effect of weld heat input on the microstructure and mechanical properties of wire arc additively manufactured 15-5PH stainless steel. The International Journal of Advanced Manufacturing Technology, 132 (11-12). pp. 5305-5314. ISSN 1433-3015

Walls, D. B. and Banks, D. and Kremer, Y. and Boyce, A. J. and Burnside, N. M. (2024) GIS analysis for the selection of optimal sites for mine water geothermal energy application: a case study of Scotland's mining regions. Quarterly Journal of Engineering Geology and Hydrogeology, 57 (3). ISSN 1470-9236

2023

Abad, Farhad and Rouzegar, Jafar and Lotfian, Saeid (2023) Application of the exact spectral element method in the analysis of the smart functionally graded plate. Steel and Composite Structures, 47 (2). pp. 297-313. ISSN 1229-9367

Banerjee, Amborish and Wylie, Andrew and Da Silva, Laurie (2023) Near-net shape manufacture of ultra-high strength maraging steel using flow forming and inertia friction welding : experimental and microstructural characterisation. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 145 (2). 021004. ISSN 1528-8935

Coyne-Grell, A. and Blaizot, J. and Rahimi, S. and Violatos, I. and Nouveau, S. and Dumont, C. and Nicolaÿ, A. and Bozzolo, N. (2023) Evolution of γ′ precipitation during the early stages of industrial forging of a nickel-based superalloy. Metallurgical and Materials Transactions A, 54 (5). pp. 2022-2036. ISSN 1073-5623

England, Andrew and Toumpis, Athanasios and Gorash, Yevgen (2023) Very high cycle fatigue of welds : a review. Metals, 13 (11). 1860. ISSN 2075-4701

Levano Blanch, Oliver and Pope, Jacob and Violatos, Ioannis and Rahimi, Salaheddin and Jackson, Martin (2023) Residual stress distributions in dissimilar titanium alloy diffusion bonds produced from powder using field-assisted sintering technology (FAST-DB). Metallurgical and Materials Transactions A, 54 (9). pp. 3578-3593. ISSN 1073-5623

Macleod, Kenneth and Nash, David h. and Bow, David r. and Ma, Le (2023) Influence of heat treatments on the microstructure and mechanical properties of two fine Mg-Li-Y alloy wires for bioresorbable applications. Advanced Engineering Materials, 25 (4). 2201164. ISSN 1527-2648

Madarkar, Rajeshkumar and Ghosh, Sudarsan and Rao, P.V. and Luo, Xichun; Xie, Wenkun and Liu, Qi and Wang, Zhengjian and Luo, Xichun, eds. (2023) Investigation of grinding performance in ultrasonic vibration assisted grinding of Ti-6Al4V alloy using minimum quantity lubrication. In: 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). IEEE, GBR, pp. 1-6. ISBN 9781665476041

Massabuau, Fabien C.-P. and Adams, Francesca and Nicol, David and Jarman, John C. and Frentrup, Martin and Roberts, Joseph W. and O'Hanlon, Thomas J. and Kovács, Andras and Chalker, Paul R. and Oliver, R. A. (2023) Ni/Au contacts to corundum α-Ga2O3. Japanese Journal of Applied Physics, 62 (SF). SF1008. ISSN 0021-4922

Myshlyaev, M. and Korznikova, G. and Konkova, T. and Korznikova, E. and Aletdinov, A. and Khalikova, G. and Raab, G. and Mironov, S. (2023) Microstructural evolution during superplastic deformation of Al-Mg-Li alloy : dynamic recrystallization or grain-boundary sliding? Journal of Alloys and Compounds, 936. 168302. ISSN 0925-8388

Peters, Sean and Perez, Marcos and Blackwell, Paul (2023) Integrating HIP and homogenisation heat treatment and its effect on the workability of a conventional peritectic TiAl alloy. Intermetallics, 158. 107884. ISSN 0966-9795

Rane, Kedarnath and Date, Prashant and Srivatsan, T. S. (2023) Influence of material and process parameters on reduction-swelling characteristics of sintered iron pellets. Metals, 13 (1). 141. ISSN 2075-4701

Shao, Zhonglei and Chen, Lu and Lu, Hailin and Fan, Fulin (2023) Preparation and properties of wear-resistant carbonized-ceramic composite coating on pure aluminum surface. International Journal of Applied Ceramic Technology, 20 (1). pp. 380-394. ISSN 1744-7402

Singh, Ajit Pal and Torrens, Rob and Gabbitas, Brian and Sivaswamy, Giribaskar (2023) Effect of heat treatments on microstructure and mechanical properties of low-cost Ti-6Al-4V alloy produced by thermo-mechanical powder consolidation route. Metals, 13 (1). 173. ISSN 2075-4701

Wadge, Matthew D. and McGuire, Jamie and Thomas, Kathryn G. and Stuart, Bryan W. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2023) Developing alkaline titanate surfaces for medical applications. International Materials Reviews, 68 (6). pp. 677-724. ISSN 0950-6608

Wittmann, Martin and Voigtmann, Maximilian and Simmchen, Juliane (2023) Active BiVO 4 swimmers propelled by depletion gradients caused by photodeposition. Small, 19 (15). 2206885. ISSN 1613-6810

2022

Arasteh, Sahand and Masoudi, Afshin and Abbasi, Alireza and Lotfian, Saeid (2022) Mechanical activation-assisted solid-state aluminothermic reduction of CuO powders for in-situ copper matrix composite fabrication. Metals, 12 (8). 1292. ISSN 2075-4701

Brownlie, Frazer and Hodgkiess, Trevor and Pearson, Alastair and Galloway, Alexander (2022) Electrochemical evaluation of the effect of different NaCl concentrations on low alloy- and stainless steels under corrosion and erosion-corrosion conditions. Corrosion and Materials Degradation, 3 (1). pp. 101-126.

Fritsche, S. and Draper, J. and Toumpis, A. and Galloway, A. and Amancio-Filho, S.T. (2022) Refill friction stir spot welding of AlSi10Mg alloy produced by laser powder bed fusion to wrought AA7075-T6 alloy. Manufacturing Letters, 34. pp. 78-81. ISSN 2213-8463

Igwemezie, Victor and Shamir, Muhammad and Mehmanparast, Ali and Ganguly, Supriyo (2022) A review of LTT welding alloys for structural steels : design, application and results. Journal of Advanced Joining Processes, 5. 100110. ISSN 2666-3309

Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Li, Hongjun (2022) Influence of aluminium alloy grade on dissimilar friction stir welding of aluminium to AZ31B. In: Joint International Symposium on Friction Stir Welding and Processing, 2022-09-28 - 2022-09-30, Leuphana University.

Karrar, Gihad and Galloway, Alexander and Toumpis, Athanasios and Li, Hongjun (2022) Optimisation of friction stir welding parameters using the Taguchi technique for dissimilar joining of AA5083 to copper. In: Joint International Symposium on Friction Stir Welding and Processing, 2022-09-28 - 2022-09-30, Leuphana University.

Korznikova, Galia Ferdinandovna and Khalikova, Gulinara Rashidovna and Mironov, Sergey Yurievich and Aletdinov, Ainur Faradatovich and Korznikova, Elena Aleksandrovna and Konkova, T.N. and Myshlyaev, Mikhail Mikhailovich (2022) СВЕРХПЛАСТИЧЕСКОЕ ПОВЕДЕНИЕ АЛЮМИНИЕВОГО СПЛАВА 1420 С МЕЛКОЗЕРНИСТОЙ СТРУКТУРОЙ. Physical Mesomechanics, 25 (2). pp. 47-55. ISSN 1683-805X

Kwok, T.W.J. and Rahman, K.M. and Vorontsov, V.A. and Dye, D. (2022) Strengthening κ-carbide steels using residual dislocation content. Scripta Materialia, 213. 114626. ISSN 1359-6462

Lu, Qiong and Zhang, Chi and Wang, Wei and Jiang, Shuai and Aucott, Lee and Yasmeen, Tabassam and Jiang, Jun (2022) Reveal the viscoplastic behaviour and microstructure evolution of stainless steel 316L. Materials, 15 (20). 7064. ISSN 1996-1944

Mir, Amir and Luo, Xichun and Llavori, Iñigo and Roy, Anish and Zlatanovic, Danka Labus and Joshi, Srikrishna N. and Goel, Saurav (2022) Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals. Journal of the Mechanical Behavior of Biomedical Materials, 130. 105185. ISSN 1751-6161

Mohapatra, Ranjan K. and Seidel, Veronique and Azam, Mohammad (2022) Editorial : metal-complexed molecules of natural and synthetic origin: pharmacological advances and therapeutic applications. Frontiers in Pharmacology, 13. 1044439. ISSN 1663-9812

Mulvey, Robert E. and Doherty, Shay P. and Banerjee, Sumanta and Clegg, William and Palin, Fiona J. and Kennedy, Alan R. and Robertson, Stuart D. (2022) Incorporating trimethylaluminium into the structures of alkali metal (Li, Na, K, Cs) dihydropyridines. Zeitschrift fur Anorganische und Allgemeine Chemie, 649 (5). ISSN 1521-3749

Souza, Paul M. and Sivaswamy, Giribaskar and Bradley, Luke and Barrow, Andrew and Rahimi, Salah (2022) An innovative constitutive material model for predicting high temperature flow behaviour of inconel 625 alloy. Journal of Materials Science, 57 (44). pp. 20794-20814. ISSN 0022-2461

Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of cementite spheroidizing duration on the microstructure and sliding wear response of grey cast iron against AISI 4330. Wear, 488-489. 204155. ISSN 0043-1648

Woodward, Ronnie G. and Toumpis, Athanasios and Galloway, Alexander (2022) The influence of tempering and annealing on the microstructure and sliding wear response of G350 grey cast iron. Wear, 496-497. 204283. ISSN 0043-1648

2021

Andreou, Eleni and Roy, Sudipta (2021) Modelling the electroforming process : significance and challenges. Transactions of the Institute of Metal Finishing, 99 (6). pp. 299-305. ISSN 0020-2967

Aumeunier, M.-H. and Gerardin, J. and Talatizi, C. and Le Bohec, M. and Ben Yaala, M. and Marot, L. and Loarer, T. and Mitteau, R. and Gaspar, J. and Rigollet, F. and Courtois, X. and Houry, M. and Herrmann, A. and Faitsch, M. (2021) Infrared thermography in metallic environments of WEST and ASDEX upgrade. Nuclear Materials and Energy, 26. 100879. ISSN 2352-1791

Ferguson, M. and Konkova, T. and Violatos, I. (2021) Microstructural evolution of an interface region in a nickel-based superalloy joint produced by direct energy deposition. Proceedings of the International Conference on Welding and Additive Manufacturing, 15. pp. 47-54. ISSN 1307-6892

Sloan-Dennison, Sian and Laing, Stacey and Graham, Duncan and Faulds, Karen (2021) From Raman to SESORRS : moving deeper into cancer detection and treatment monitoring. Chemical Communications, 57 (93). pp. 12436-12451. ISSN 1359-7345

Vishwanath, A.S. and Rane, K. and Schaper, J. and Strano, M. and Casati, R. (2021) Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process. Powder Metallurgy, 64 (5). pp. 370-377. ISSN 1743-2901

Wang, Ying and Xu, Xu and Zhao, Wenxia and Li, Nan and McDonald, Samuel A. and Chai, Yuan and Atkinson, Michael and Dobson, Katherine J. and Michalik, Stefan and Fan, Yingwei and Withers, Philip J. and Zhou, Xiaorong and Burnett, Timothy L. (2021) Damage accumulation during high temperature fatigue of Ti/SiCf metal matrix composites under different stress amplitudes. Other. arXiv.org, Ithaca, NY.

2019

Shamir, Muhammad and Junaid, Massab and Khan, Fahd Nawaz and Taimoor, Aqeel Ahmad and Baig, Mirza Nadeem (2019) A comparative study of electrochemical corrosion behavior in laser and TIG welded Ti-5Al-2.5Sn alloy. Journal of Materials Research and Technology, 8 (1). pp. 87-98. ISSN 2238-7854

Ye, Jun and Meza, Francisco J. and Hajirasouliha, Iman and Becque, Jurgen and Shepherd, Paul and Pilakoutas, Kypros (2019) Experimental investigation of cross-sectional bending capacity of cold-formed steel channels subject to local-distortional buckling interactionexperimental investigation of cross-sectional bending capacity of cold-formed steel channels subject to local-distortional buckling interaction. Journal of Structural Engineering (United States), 145 (7). 04019064. ISSN 0733-9445

Ye, Jun and Mojtabaei, Seyed Mohammad and Hajirasouliha, Iman (2019) Seismic performance of cold-formed steel bolted moment connections with bolting friction-slip mechanism. Journal of Constructional Steel Research, 156. pp. 122-136. ISSN 0143-974X

2018

Humphreys, Colin J. and Massabuau, Fabien C-P. and Rhode, Sneha L. and Horton, Matthew K. and O'Hanlon, Thomas J. and Kovacs, Andras and Zielinski, Marcin S. and Kappers, Menno J. and Dunin-Borkowski, Rafal E. and Oliver, Rachel A. (2018) Atomic resolution imaging of dislocations in algan and the efficiency of UV LEDs. Microscopy and Microanalysis, 24 (S1). pp. 4-5. ISSN 1431-9276

Massabuau, F. C.-P. and Chen, P. and Rhode, S. L. and Horton, M. K. and O'Hanlon, T. J. and Kovács, A. and Zielinski, M. S. and Kappers, M. J. and Dunin-Borkowski, R. E. and Humphreys, C. J. and Oliver, R. A.; (2018) Alloy fluctuations at dislocations in III-nitrides : dentification and impact on optical properties. In: Proceedings Volume 10532, Gallium Nitride Materials and Devices XIII. Proceedings of SPIE - The International Society for Optical Engineering, 10532 . Society of Photo-Optical Instrumentation Engineers, USA, pp. 301-306.

Rane, Kedarnath and Dhokey, Narendra (2018) On the formation and distribution of in situ synthesized TiB2 reinforcements in cast aluminium matrix composites. Journal of Composites Science, 2 (3). 52. ISSN 2504-477X

Weatherley, Thomas F. K. and Massabuau, Fabien C.-P. and Kappers, Menno J. and Oliver, Rachel A. (2018) Characterisation of InGaN by photoconductive atomic force microscopy. Materials, 11 (10). 1794. ISSN 1996-1944

Ye, Jun and Mojtabaei, Seyed Mohammad and Hajirasouliha, Iman (2018) Local-flexural interactive buckling of standard and optimised cold-formed steel columns. Journal of Constructional Steel Research, 144. pp. 106-118. ISSN 0143-974X

2017

Rosochowski, Andrzej, ed. (2017) Severe Plastic Deformation Technology. Whittles Publishing. ISBN 9781849950916

Dobson, Katherine J. and Harrison, Sue T.L. and Lin, Qingyang and Bhreasail, Aine Ní and Fagan-Endres, Marijke A. and Neethling, Stephen J. and Lee, Peter D. and Cilliers, Jan J. (2017) Insights into ferric leaching of low grade metal sulfide-containing ores in an unsaturated ore bed using X-ray computed tomography. Minerals, 7 (5). 85. ISSN 2075-163X

Stefani, Nicola and Bylya, Olga and Reshetov, Aleksey and Blackwell, Paul (2017) On the applicability of JMAK-type models in predicting IN718 microstructural evolution. Computer Methods in Materials Science, 17 (1). pp. 59-68. ISSN 1641-8581

2016

Allan, Michael and Thomas, Matthew and Brooks, Jeffery and Blackwell, Paul; Venkatesh, Vasisht and Pilchak, Adam L. and Allison, John E. and Ankem, Sreeramaurthy and Boyer, Rodney and Christodoulou, Julie and Fraser, Hamish L. and Imam, M. Ashraf and Kosaka, Yoji and Rack, Henry J. and Chaterjee, Amit and Woodfield, Andy, eds. (2016) β Recrystallisation characteristics of α + β titanium alloys for aerospace applications. In: Proceedings of the 13th World Conference on Titanium. John Wiley & Sons Inc., USA, pp. 203-208. ISBN 9781119293668

Arthington, Matthew R. and Cleaver, Christopher J. and Huang, Jianglin and Duncan, Stephen R. (2016) Curvature control in radial-axial ring rolling. IFAC-PapersOnLine, 49 (20). pp. 244-249.

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138 (4). 041403. ISSN 0094-9930

Coakley, James and Rahman, Khandaker M. and Vorontsov, Vassili A. and Ohnuma, Masato and Dye, David (2016) Effect of precipitation on mechanical properties in the β-Ti alloy Ti-24Nb-4Zr-8Sn. Materials Science and Engineering A, 655. pp. 399-407. ISSN 0921-5093

Fowler, Steven and Toumpis, Athanasios and Galloway, Alexander (2016) Fatigue and bending behaviour of friction stir welded DH36 steel. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2659-2669. ISSN 1433-3015

Giourntas, Lampros Gerasimos and Brownlie, Frazer and Karafyllias, Georgios and Hodgkiess, Trevor and Galloway, Alexander (2016) Effect of corrosion on abrasive wear in a range of materials. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.

Karafyllias, Georgios and Giourntas, Lampros and Galloway, Alexander and Hodgkiess, Trevor (2016) Relative performance of two cast irons and two stainless steels under erosion-corrosion conditions. In: Corrosion 2016, 2016-03-06 - 2016-03-10.

Lin, Q. and Barker, D. J. and Dobson, K. J. and Lee, P. D. and Neethling, S. J. (2016) Modelling particle scale leach kinetics based on X-ray computed micro-tomography images. Hydrometallurgy, 162. pp. 25-36. ISSN 0304-386X

Logan, B. P. and Toumpis, A. I. and Galloway, A. M. and McPherson, N. A. and Hambling, S. J. (2016) Dissimilar friction stir welding of duplex stainless steel to low alloy structural steel. Science and Technology of Welding and Joining, 21 (1). pp. 27-35. ISSN 1362-1718

Micallef, Daniel and Camilleri, Duncan and Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi (2016) Local heat generation and material flow in friction stir welding of mild steel assemblies. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (2). pp. 586-602. ISSN 1464-4207

Radecka, A. and Coakley, J. and Vorontsov, V. A. and Martin, T. L. and Bagot, P. A. J. and Moody, M. P. and Rugg, D. and Dye, D. (2016) Precipitation of the ordered α2 phase in a near-α titanium alloy. Scripta Materialia, 117. pp. 81-85. ISSN 1359-6462

2015

Acayaba, Gabriel Medrado Assis and Muñoz de Escalona, Patricia (2015) Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel. CIRP Journal of Manufacturing Science and Technology, 11. pp. 62-67. ISSN 1755-5817

Andrews, N. and Giourntas, L. and Galloway, A. M. and Pearson, A. (2015) Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316. International Journal of Refractory Metals and Hard Materials, 48. pp. 229-237. ISSN 0263-4368

Baillie, P. and Campbell, S. W. and Galloway, A. M. and Cater, S. R. and McPherson, N. A. (2015) Friction stir welding of 6mm thick carbon steel underwater and in air. Science and Technology of Welding and Joining, 20 (7). pp. 585-593. ISSN 1362-1718

Baker, Neville (2015) The role of zirconium in microalloyed steels. Materials Science and Technology, 31 (3). pp. 265-294. ISSN 0267-0836

Baker, Thomas (2015) Microalloyed steels. Ironmaking and Steelmaking. ISSN 1743-2812

Barbera, D. and Chen, H.F. and Liu, Y.H. (2015) On the creep fatigue behavior of Metal Matrix Composites. Procedia Engineering, 130. pp. 1121-1136. ISSN 1877-7058

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2015) On the modified monotonic loading concept for the calculation of the cyclic j-integral. Journal of Pressure Vessel Technology, 137 (5). 051406. ISSN 0094-9930

Bylya, O.I. and Sarangi, M.K. and Rohit, N. and Nayak, A. and Vasin, R.A. and Blackwell, P.L. (2015) Simulation of the material softening during hot metal forming. Archives of Metallurgy and Materials, 60 (3A). pp. 1887-1893. ISSN 2300-1909

Cairns, Jonathan and McPherson, Norman and Galloway, Alexander (2015) Using artificial neural networks to identify and optimise the key parameters affecting geometry of a GMAW fillet weld. In: 18th International Conference on Joining Materials, JOM-18, 2015-04-26 - 2015-04-29, Konventum LO-Skolen.

Camilleri, Duncan and Micallef, Daniel and Arbaoui, Larbi and Toumpis, Athanasios and Galloway, Alexander (2015) Numerical modelling techniques applicable for the prediction of residual stresses and distortion due to mild steel DH36 frictions stir welding. In: 4th International Conference on Friction Stir Welding, FSWP2015, 2015-10-01 - 2015-10-02.

Coakley, James and Vorontsov, Vassili A. and Jones, Nicholas G. and Radecka, Anna and Bagot, Paul A.J. and Littrell, Kenneth C. and Heenan, Richard K. and Hu, Frédéric and Magyar, Andrew P. and Bell, David C. and Dye, David (2015) Precipitation processes in the beta-titanium alloy Ti-5Al-5Mo-5V-3Cr. Journal of Alloys and Compounds, 646. pp. 946-953. 34520. ISSN 0925-8388

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng and Liu, Donghuan (2015) The interacting effect for collinear cracks near mismatching bimaterial interface under elastic creep. Journal of Pressure Vessel Technology. ISSN 0094-9930 (In Press)

Easton, David and Zhang, Yuxuan and Wood, James and Galloway, Alexander and Robbie, Mikael Olsson and Hardie, Christopher (2015) Brazing development and interfacial metallurgy study of tungsten and copper joints with eutectic gold copper brazing alloy. Fusion Engineering and Design, 98-99. pp. 1956-1959. ISSN 0920-3796

Garcia, D. and Palazzetti, R. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2015) Vibration-based delamination diagnosis and modelling for composite laminate plates. Composite Structures, 130. pp. 155-162. ISSN 0263-8223

Giourntas, L. and Hodgkiess, T. and Galloway, A.M. (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. Wear, 332-333. pp. 1051-1058. ISSN 0043-1648

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Comparative study of erosion-corrosion performance on a range of stainless steels. In: 20th International Conference on Wear of Materials, 2015-04-12 - 2015-04-16, The Sheraton Centre.

Giourntas, Lampros Gerasimos and Hodgkiess, Trevor and Galloway, Alexander (2015) Enhanced approach of assessing the corrosive wear of engineering materials under impingement. Wear, 338-339. pp. 155-163. ISSN 0043-1648

Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE analysis. In: 12th International Conference on Computational Methods & Experiments in Surface & Contact Mechanicsc including Tribology, 2015-04-21 - 2015-04-23, TRYP València Oceanic Hotel.

Gorash, Yevgen and Dempster, William and Nicholls, William and Hamilton, Robert; de Hosson, J.Th.M. and Hadfield, M. and Brebbia, C.A., eds. (2015) Modelling of metal-to-metal seals in a pressure relief valve using advanced FE-analysis. In: Surface Effects and Contact Mechanics including Tribology XII. WIT Transactions on Engineering Sciences, 91 . WIT Press, ESP, pp. 247-258. ISBN 978-1-84564-950-0

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2015) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part II - microstructure and hardness. Materials Science and Technology, 31 (3). pp. 355-360. ISSN 0267-0836

Kakaie-Lafdaini, Mohammad Hadi and Ghadiri-Zahrani, Ismaeil and Galloway, Alexander (2015) Optimization study of weld geometry in the tandem submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (6). pp. 1068-1077. ISSN 2041-2975

Lawson, Mark and Basta, Antoine and Uzzaman, Md Asraf (2015) Design of stainless steel sections with circular openings in shear. Journal of Constructional Steel Research, 112. pp. 228-241. ISSN 0143-974X

Ley, F.H. and Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2015) Effect of shielding gas parameters on weld metal thermal properties in gas metal arc welding. International Journal of Advanced Manufacturing Technology, 80 (5). pp. 1213-1221. ISSN 1433-3015

Mridha, Shahjahan and Baker, Neville (2015) Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces. Materials Science and Technology, 31 (3). pp. 337-343. ISSN 0267-0836

Mridha, Shahjahan and Idriss, A.N. and Maleque, M.A. and Jaacob, I.L. and Baker, Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Munoz De Escalona, Patricia and Maropoulos, Paul G. (2015) A geometrical model for surface roughness prediction when face milling Al 7075-T7351 with square insert tools. Journal of Manufacturing Systems, 36. pp. 216-223. ISSN 0278-6125

Munoz De Escalona, Patricia and Shokrani, A. and Newman, S.T. (2015) Influence of cutting environments on surface integrity and power consumption of austenitic stainless steel. Robotics and Computer Integrated Manufacturing, 36. pp. 60-69. ISSN 0736-5845

Polezhayeva, Helena and Toumpis, Athanasios and Galloway, Alexander and Molter, Lars and Ahmad, Bilal and Fitzpatrick, Michael E. (2015) Fatigue performance of friction stir welded marine grade steel. International Journal of Fatigue, 81. pp. 162-170. ISSN 0142-1123

Rahman, K.M. and Vorontsov, V.A. and Dye, D. (2015) The effect of grain size on the twin initiation stress in a TWIP steel. Acta Materialia, 89. pp. 247-257. ISSN 1359-6454

Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2015) Buckling and postbuckling of variable angle tow composite plates under in-plane shear loading. International Journal of Solids and Structures, 58. pp. 270-287. ISSN 0020-7683

Rasool, G. and Stack, M.M. (2015) Tribo-oxidation maps for Ti against steel. Tribology International, 91. pp. 258-266. ISSN 0301-679X

Stevenson, Ryan and Toumpis, Athanasios and Galloway, Alexander (2015) Defect tolerance of friction stir welds in DH36 steel. Materials and Design, 87. pp. 701-711. ISSN 0261-3069

Tingey, Christopher and Galloway, Alexander and Toumpis, Athanasios and Cater, Stephen R. (2015) Effect of tool centreline deviation on the mechanical properties of friction stir welded DH36 steel. Materials and Design, 65. pp. 896-906. ISSN 0261-3069

Toumpis, Athanasios and Galloway, Alexander and Camilleri, Duncan and Arbaoui, Larbi; (2015) Recent developments in steel friction stir welding : Project HILDA. In: ASME 2015 International Mechanical Engineering Congress and Exposition. ASME, USA. ISBN 978-0-7918-5736-6

Toumpis, Athanasios and Galloway, Alexander and Molter, Lars and Polezhayeva, Helena (2015) Systematic investigation of the fatigue performance of a friction stir welded low alloy steel. Materials and Design, 80. pp. 116-128. ISSN 0261-3069

Toumpis, Athanasios and Galloway, Alexander and Polezhayeva, Helena and Molter, Lars (2015) Fatigue assessment of friction stir welded DH36 steel. In: TMS Annual Meeting and Exhibition, TMS2015, 2015-03-15 - 2015-03-19, Florida.

Toumpis, Athanasios and Galloway, Alexander and Polezhayeva, Helena and Molter, Lars; Mishra, Rajiv S. and Mahoney, Murray W. and Sato, Yakuta and Hovanski, Yuri, eds. (2015) Fatigue assessment of friction stir welded DH36 steel. In: Friction Stir Welding and Processing VIII. John Wiley & Sons, Ltd., USA, pp. 11-20. ISBN 9781119082491

Viswanathan, G.B. and Shi, R. and Genc, A. and Vorontsov, V.A. and Kovarik, L. and Rae, C.M.F and Mills, M.J. (2015) Segregation at stacking faults within the γ′ phase of two Ni-base superalloys following intermediate temperature creep. Scripta Materialia, 94. pp. 5-8. ISSN 1359-6462

Vorontsov, V.A. and Jones, N.G. and Rahman, K.M. and Dye, D. (2015) Superelastic load cycling of gum metal. Acta Materialia, 88. pp. 323-333. ISSN 1359-6454

Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2015) Framework for the buckling optimisation of variable-angle-tow composite plates. AIAA Journal, 53 (12). pp. 3788-3804. ISSN 0001-1452

Zhou, Xingguo and Mackenzie, Donald and Pan, Wenke (2015) A new distributed cooling method for mitigating residual stress in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

2014

Andrews, Nicola and Giourntas, L. and Galloway, A. M. and Pearson, A. (2014) Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316. Wear, 320 (1-2). pp. 143-151. ISSN 0043-1648

Bagherian, Ehsaan Reza and Bell, Colin and Cooper, Mervyn and Fan, Yongchang and Frame, Brian and Abdolvand, Amin (2014) Influence of casting speed on the structure and mechanical properties of continuous cast dhp copper tube. In: 23rd International Conference on Metallurgy and Materials, 2014-05-21 - 2014-05-23, Hotel Voronez I.

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 8 (8). pp. 651-655. ISSN 2010-3778

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Inverse problem for shape control of flexible reflectors using distributed solar pressure. Smart Materials and Structures, 23 (7). 075026. ISSN 0964-1726

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Camilleri, Duncan and Micallef, Daniel (2014) Modelling magnetohydrodynamics to investigate variation of shielding gases on arc characteristics in the GTAW process. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Loden Hotel.

Coburn, Broderick H. and Wu, Zhangming and Weaver, Paul M. (2014) Buckling analysis of stiffened variable angle tow panels. Composite Structures, 111. ISSN 0263-8223

Ellul, B and Camilleri, Duncan and Betts, J (2014) A progressive failure analysis applied to fibre-reinforced composite plates subject to out-of-plane bending. Mechanics of Composite Materials, 49 (6). pp. 605-620. ISSN 0191-5665

Garćia, David and Trendafilova, Irina (2014) A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment : application for delamination detection in a composite beam. Journal of Sound and Vibration, 333 (25). pp. 7036-7050. ISSN 0022-460X

Gorash, Yevgen and Mackenzie, Donald (2014) Cyclic yield strength in definition of design limits for fatigue and creep. Proceedings in Applied Mathematics and Mechanics, PAMM, 14 (1). pp. 365-366. ISSN 1617-7061

Gray, Thomas and Camilleri, Duncan and McPherson, Norman (2014) Control of welding distortion in thin plate fabrication : Design support exploiting computational simulation. Welding and Other Joining Technologies . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857090478

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Olejnik, Lech and Yakushina, Evgenia and Wood, Paul (2014) Mechanical properties and microstructure of AZ31B magnesium alloy processed by I-ECAP. Metallurgical and Materials Transactions A, 45 (3). pp. 1609-1620. ISSN 1073-5623

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2014) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part I - melt features. Materials Science and Technology, 30 (10). pp. 1209-1213. ISSN 0267-0836

Loughlan, J. and Nash, David and Rhodes, James (2014) Coupled instabilities in metal structures. Thin-Walled Structures, 81. ISSN 0263-8231

Maltin, C. A. and Galloway, A. M. and Mweemba, M (2014) Alternative nickel based filler metals for use in the girth welding of bi-metallic pipelines. Metallurgical and Materials Transactions A. ISSN 1073-5623 (Submitted)

Maltin, Charles and Nolton, Lauren J. and Scott, Jamie L. and Toumpis, Athanasios I. and Galloway, Alexander M. (2014) The potential adaptation of stationary shoulder friction stir welding technology to steel. Materials and Design, 64. pp. 614-624. ISSN 0261-3069

Maltin, Charles A. and Galloway, Alexander M. and Mweemba, Martin (2014) Microstructural evolution of Inconel 625 and Inconel 686CPT weld metal for clad carbon steel linepipe joints : a comparator study. Metallurgical and Materials Transactions A, 45A (8). pp. 3519-3532. ISSN 1073-5623

Mridha, Shahjahan and Amuda, M.O.H. (2014) Exploratory study of sensitization in cryogenically cooled ferritic stainless steel welds. International Journal of Corrosion, 2014. 707465. ISSN 1687-9333

Mridha, Shahjahan and Baker, Neville (2014) Oxidation protection behaviour of titanium aluminide coatings develped by TIG technique. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Atlantis the Palm.

Munoz De Escalona, Patricia and Mridha, Shahjahan and Baker, neville (2014) Effect of shielding gas on the properties and microstructure of melted steel surface using a TIG torch. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Atlantis the Palm.

Patel, P and Mridha, Shahjahan and Baker, neville (2014) Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique. Materials Science and Technology, 30 (12). pp. 1506-1514. ISSN 0267-0836

Rahman, K.M. and Vorontsov, V.A. and Dye, D. (2014) The dynamic behaviour of a twinning induced plasticity steel. Materials Science and Engineering A, 589. pp. 252-261. ISSN 0921-5093

Rasool, G. and Stack, M.M. (2014) Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribology International, 74. pp. 93-102. ISSN 0301-679X

Schnier, Gladys and Wood, James and Galloway, Alexander (2014) Investigating the effects of process variables on the residual stresses of weld and laser cladding. Advanced Materials Research, 996. pp. 481-487. ISSN 1022-6680

Tamimi, Saeed and Ketabchi, Mostafa and Parvin, Nader and Sanjari, Mehdi and Lopes, Augusto (2014) Accumulative roll bonding of pure copper and IF steel. International Journal of Metals, 2014. 179723. ISSN 2314-680X

Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi and Poletz, Nicolas (2014) Thermomechanical deformation behaviour of DH36 steel during friction stir welding by experimental validation and modelling. Science and Technology of Welding and Joining, 19 (8). pp. 653-663. ISSN 1362-1718

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen and McPherson, Norman (2014) Development of a process envelope for friction stir welding of DH36 steel : a step change. Materials and Design, 62. pp. 64-75. ISSN 0261-3069

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Burling, Paul and Stanhope, Chris (2014) Friction stir welding of steel for marine applications. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 2014-06-08 - 2014-06-13, California.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Micallef, Daniel and Camilleri, Duncan and Poletz, Nicolas and Arbaoui, Larbi (2014) Advances in friction stir welding of steel : Project HILDA. In: Transport Research Arena (TRA2014), 2014-04-14 - 2014-04-17, CNIT, La Défense.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Molter, Lars (2014) A techno-economic evaluation of friction stir welding of DH36 steel. In: 10th Friction Stir Welding Symposium, 10FSWS, 2014-05-20 - 2014-05-22, China National Convention Centre.

Uzzaman, Asraf and Wrzesien, Andrzej and Hamilton, Robert and Lim, James B.P. and Nash, David (2014) Numerical investigation of cold-formed steel top-hat purlins. In: 22nd Specialty Conference on Cold-Formed Steel Structures, CCFSS 2014, 2014-11-05 - 2014-11-06, Missouri.

Yan, H.-Y. and Vorontsov, V.A. and Dye, D. (2014) Alloying effects in polycrystalline γ′ strengthened Co-Al-W base alloys. Intermetallics, 48. pp. 44-53. ISSN 0966-9795

Yan, Hui-Yu and Coakley, James and Vorontsov, Vassili A. and Jones, Nicholas G. and Stone, Howard J. and Dye, David (2014) Alloying and the micromechanics of Co-Al-W-X quaternary alloys. Materials Science and Engineering A, 613. pp. 201-208. ISSN 0921-5093

Zhang, Yuxuan and Galloway, Alexander and Wood, James and Olsson Robbie, Mikael and Easton, David and Zhu, Wenzhong (2014) Interfacial metallurgy study of brazed joints between tungsten and fusion related materials for divertor design. Journal of Nuclear Materials, 454 (1-3). pp. 207-216. ISSN 0022-3115

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

2013

Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin; Badescu, Viorel, ed. (2013) Usage of asteroid resources for space-based geoengineering. In: Asteroids. Springer Berlin Heidelberg, pp. 581-604. ISBN 978-3-642-39243-6

Beyer, V. and Campbell, Stuart and Ramsey, Gemma and Galloway, Alexander and Moore, A.J. and McPherson, Norman (2013) Systematic study of effect of cross-drafts and nozzle diameter on shield gas coverage. Science and Technology of Welding and Joining, 18 (8). pp. 652-660. ISSN 1362-1718

Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick; (2013) Future Needs for Tribo-Corrosion Research and Testing. In: Tribo-Corrosion. ASTM International, USA, pp. 1-13.

Boyle, James (2013) The role of uncertainty in creep mechanics. In: 4th Canadian Conference on Nonlinear Solid Mechanics, 2013-07-23 - 2013-07-26.

Cairns, Jonathan and McPherson, Norman and Galloway, Alexander and MacPherson, M. and McKechnie, C. (2013) Optimised penetration for fillet welding. In: 17th International Conference on Joining Materials, JOM 17, 2013-05-05 - 2013-05-08.

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Derivation of forces acting on the liquid weld metal based on arc pressure measurements produced using alternating shielding gases in the GTAW process. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09.

Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2013) A computational fluid dynamic analysis of the effect of weld nozzle geometry changes on shielding gas coverage during gas metal arc welding. Journal of Manufacturing Science and Engineering, 135 (5). 051016. ISSN 1528-8935

Cater, Stephen R. and Martin, Jonathan and Galloway, Alexander and McPherson, Norman (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. In: Symposium on Friction Stir Welding and Processing, 2013-03-03.

Chen, Haofeng and Gorash, Yevgen (2013) Novel direct method on the life prediction of component under high temperature-creep fatigue conditions. In: 13th International Conference on Fracture, 2013-06-16 - 2013-06-21, The China National Convention Center (CNCC).

Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161

Galloway, Alexander and McGhie, W and McPherson, Norman (2013) Thin plate buckling mitigation and reduction challenges for naval ships. Journal of Marine Engineering & Technology, 12 (2). pp. 3-10. ISSN 1476-1548

Gorash, Yevgen and Chen, Haofeng (2013) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). Materials Research Innovations, 17 (5). pp. 337-343.

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Gorash, Yevgen and Chen, Haofeng; (2013) Linear matching method for parametric studies of weldments creep-fatigue endurance. In: ASME 2013 Pressure Vessels and Piping Conference. ASME, FRA. ISBN 978-0-7918-5570-6

Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue endurance of welded joints. Proceedings in Applied Mathematics and Mechanics, PAMM, 13 (1). pp. 73-74. ISSN 1617-7061

Groh, R.M.J. and Weaver, Paul M. and White, S. and Raju, Gangadharan and Wu, Zhangming (2013) A 2D equivalent single-layer fomulation for the effect of transverse shear on laminated plates with curvilinear fibres. Composite Structures, 100. pp. 464-478. ISSN 0263-8223

Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Olsson Robbie, Mikael and Zhang, Yuxuan (2013) The metallurgy, mechanics, modelling and assessment of dissimilar material brazed joints. Journal of Nuclear Materials, 432 (1-3). pp. 42-51. ISSN 0022-3115

Mackenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Case Studies, 10. pp. 19-30. ISSN 1642-236X

McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Hambling, S.J. (2013) Friction stir welding of thin DH36 steel plate. Science and Technology of Welding and Joining, 18 (5). pp. 441-450. ISSN 1362-1718

Md Mahbubur Rahman, M and Xu, Yixiang and Lim, James and Switzer, Christine and Hamilton, Robert and Comlekci, Tugrul and Pritchard, D. (2013) Behaviour of steel portal frames in fire : Comparison of implicit and explicit finite element methods. International Journal of Structural Stability and Dynamics, 13 (4). 1250058. ISSN 0219-4554

Micallef, Daniel and Camilleri, Duncan and Mollicone, Pierluigi (2013) Simplified thermo-elastoplastic numerical modelling techniques applied to friction stir welding of mild steel. In: ASME 2013 International Mechanical Engineering Congress and Expositi, 2013-11-15 - 2013-11-21, California.

Muscat, Martin and Camilleri, Duncan (2013) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. International Journal of Pressure Vessels and Piping, 108-109. pp. 61-66. ISSN 0308-0161

Parvez, Shahid and Abid, Muhammad and Nash, David and Fawad, H. and Galloway, Alexander (2013) Effect of torch angle on arc properties and weld pool shape in stationary GTAW. Journal of Engineering Mechanics, 139 (9). pp. 1268-1277. ISSN 0733-9399

Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2013) Buckling analysis of variable angle tow composite plates using differential quadrature. Journal of the Indian Institute of Science, 93 (4). pp. 689-697. ISSN 0019-4964

Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2013) Postbuckling analysis of variable angle tow plates using differential quadrature method. Composite Structures, 106. pp. 74-84. ISSN 0263-8223

Sanchez Cuartielles, Joan-Pau and McInnes, Colin; Badescu, Viorel, ed. (2013) Available asteroid resources in the Earth's neighbourhood. In: Asteroids. Springer Berlin Heidelberg, pp. 439-458. ISBN 978-3-642-39243-6

Schnier, Gladys and Wood, James and Galloway, Alexander; (2013) An experimental validation of residual stresses in weld clad pipelines. In: Research and Applications in Structural Engineering, Mechanics & Computation. Taylor and Francis, CRC Press, ZAF, pp. 613-617. ISBN 978-1-138-00061-2

Stack, Margaret and Crawley, Joshua and Miller, Mark; (2013) An approach to mapping the erosion-corrosion of stainless steel : Applications to tidal energy systems. In: Tribo-Corrosion. ASTM International, USA, pp. 1-28.

Uzzaman, Asraf and Wrzesien, A.M. and Hamilton, Robert and Lim, JBP and Nash, David (2013) Investigation of cold-formed steel top-hat sections under bending. In: 14th International Conference on Civil, Structural and Environmental Engineering Computing, ICC2013, 2013-09-03 - 2013-09-06.

Zhou, Xingguo and Pan, Wenke and MacKenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109. 2–6. ISSN 0308-0161

2012

Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22.

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.

Chacón-Nava, José G. and Almeraya-Calderón, F. and Orozco-Carmona, V.M. and Martínez-Villafañe, Alberto and Stack, Margaret; (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE, PER.

Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207

Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27.

Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07. (Unpublished)

Jackson, Colin and Wrzesien, Andrzej and Johnston, Ross P. and Uzzaman, Asraf and Lim, James (2012) Effect of reduced joint strength and semi-rigid joints on cold-formed steel portal frames. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.

McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Osman, M.M. (2012) A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.

McPherson, Norman and Galloway, Alexander and Wood, James and Cater, Stephen R. (2012) A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2012) Incorporation of TiC on Alsi 4340 low alloy steel surfaces via tungsten inert gas arc melting. Advanced Materials Research, 445. pp. 655-660. ISSN 1022-6680

Muscat, Martin and Camilleri, Duncan (2012) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23.

Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. Wear, 274-275. pp. 401-413. ISSN 0043-1648

Telfer, C.G. and Stack, Margaret and Jana, Buddhadev (2012) Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries. Tribology International, 53. pp. 35-44. TRIBINT-D-11-00532R1. ISSN 0301-679X

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-Formed Steel Sections with Web Openings Subjected to Web Crippling under Two-Flange Loading Conditions — Part I : Tests and Finite Element Analysis. Thin-Walled Structures, 56. pp. 38-48. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions — Part II : Parametric study and proposed design equations. Thin-Walled Structures, 56. pp. 79-87. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Experimental and analytical studies of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Parametric studies and design recommendations of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Structures, 50 (1). pp. 76-86. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben; Liew, J Y Richard and Lee, Seiw Chin, eds. (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Research Publishing Services, National University of Singapore, Singapore, pp. 179-186. ISBN 9789810726157

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: 21st International Specialty Conference on Cold Formed Steel Structures, 2012-10-24 - 2013-03-25.

Vorontsov, V.A. and Voskoboinikov, R.E. and Rae, C.M.F. (2012) Shearing of γ′ precipitates in Ni-base superalloys : a phase field study incorporating the effective γ-surface. Philosophical Magazine, 92 (5). pp. 608-634. ISSN 1478-6435

2011

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Ewing, Helen and Yang, S. (2011) The effect of precursor composition and sintering additives on the formation of ß-sialon from Al, Si and Al2O3 powders. Ceramics International, 37 (5). pp. 1667-1673. ISSN 0272-8842

Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207

Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857092908

Jana, B.D. and Stack, M.M. (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. Wear, 270 (7-8). pp. 439-445. ISSN 0043-1648

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.

Li, Y. and Milbourn, D. and Baker, Thomas (2011) Effect of Vanadium microalloying on the HAZ microstructure and properties of low carbon steels. Journal of Iron and Steel Research International, 18 (Supple). pp. 393-403. ISSN 1006-706X

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2011) Incorporation of TiC particles on AlSi 4340 low alloy steel surfaces via tungsten inert gas melting. In: 14th international Conference on Advances in Materials and Processing Technologies, 2011-07-13 - 2011-07-16.

Pan, Wenke and Boyle, James and Ramlan, Mohd. and Dun, C. and Ismail, Mohd. and Hakoda, K. (2011) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane strain small punch test. Metallurgical Journal, LXIII. pp. 174-179. ISSN 0018-8069

Stack, M. M. and Mathew, M. T. and Hodge, C. (2011) Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism. Electrochimica Acta, 56 (24). pp. 8249-8259. ISSN 0013-4686

Stack, M.M. and Abdelrahman, S.M. (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. Wear, 273 (1). pp. 38-42. ISSN 0043-1648

Stack, Margaret and Jana, Buddhadev and Abdelrahman, Shehab; (2011) Models and mechanisms of erosion-corrosion in metals. In: Tribocorrosion of Passive Metals and Coatings. Tribocorrosion of Passive Metals and Coatings . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9781845699666

Vorontsov, V.A. and Voskoboinikov, R.E. and Rae, C.M.F. (2011) Prediction of mechanical behaviour in Ni-base superalloys using the phase field model of dislocations. Advanced Materials Research, 278. pp. 150-155. ISSN 1022-6680

2010

Abdulrahman, G.H. and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25.

Baker, T.N.; (2010) Laser surface modification of Ti alloys. In: Surface Engineering of Light Alloys - Aluminium, Magnesium and Titanium Alloys. Woodhead Publications, Cambridge, UK, pp. 398-443. ISBN 1845695372

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866

Chacon-Nava, J. G. and Martinez-Villafañe, A. and Almeraya-Calderon, F. and Cabral-Miramontes, J.A. and Stack, M.M. (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X

Hodge, C. and Stack, M.M. (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. Wear, 270 (1-2). pp. 104-114. ISSN 0043-1648

Lalvani, Himanshu M. and Rist, Martin A. and Brooks, Jeffery W. (2010) Effect of delta phase on the hot deformation behaviour and microstructural evolution of inconel 718. Advanced Materials Research, 89-91 (THERME). pp. 89-91. ISSN 1022-6680

Li, Y. and Baker, T.N. (2010) Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology, 26 (9). pp. 1029-1040. ISSN 0267-0836

Manoach, Emil and Trendafilova, Irina; (2010) Damage detections in nonlinear vibrating thermally loaded plates. In: Materials with complex behaviour. Advanced Structural Materials . Springer-Verlag, Berlin Heidelberg, pp. 193-211. ISBN 9783642126673

Parvez, Shahid and Abid, Muhammad and Fawad, Hassan and Nash, David (2010) The effect of electrode tip angle on arc and anode temperature in GTAW. In: 7th Jordanian International Mechanical Engineering Conference, JIMEC'7, 2010-09-27 - 2010-09-29.

Purandare, Y. P. and Ehiasarian, A.P. and Stack, M. M. and Hovsepian, P. Eh. (2010) CrN/NbN coatings deposited by HIPIMS : a preliminary study of erosion-corrosion performance. Surface and Coatings Technology, 204 (8). pp. 1158-1162. ISSN 0257-8972

Roy, Mannish and Pauschitz, A. and Stack, Margaret (2010) Guest Editorial: Tribocorrosion 2009: East meets West. Tribology International, 43 (7). pp. 1201-1202. ISSN 0301-679X

Stack, M. M. and Hong, Ting-Fu and Wang, Hsin-Chun and Wang, Moo-Chin and Li, Wang-Long (2010) On the construction of wear maps for Y-TZP dental ceramics in aqueous environments : pH, exposure time and impact angle effects. Tribology International, 43 (12). pp. 2258-2267. ISSN 0301-679X

Stack, M.M. and Abdelrahman, S.M. (2010) CFD modelling of erosion-corrosion of steel in aqueous environments : particle concentration effects on the regime boundaries. In: 14th Nordic Conference on Tribology, NordTrib 2010, 2010-06-08 - 2010-06-11.

Stack, M.M. and Abdelrahman, S.M. and Jana, B.D. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. Wear, 268 (3-4). pp. 533-542. ISSN 0043-1648

Stack, M.M. and Abdulrahmen, G.H. (2010) Mapping erosion-corrosion of carbon steel in oil exploration conditions : some new approaches to characterizing mechanisms and synergies. Tribology International, 43 (7). pp. 1268-1277. ISSN 0301-679X

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) A CFD model of erosion-corrosion of Fe at elevated temperatures in aqueous environments. Advances in Science and Technology (72). pp. 75-86. ISSN 1662-8969

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) Some perspectives on modelling the effect of temperature on the erosion-corrosion of Fe in aqueous conditions. Tribology International, 43 (12). pp. 2279-2297.

Vorontsov, V.A. and Shen, C. and Wang, Y. and Dye, D. and Rae, C.M.F. (2010) Shearing of γ́ precipitates by a (112) dislocation ribbons in Ni-base superalloys : a phase field approach. Acta Materialia, 58 (12). pp. 4110-4119. ISSN 1359-6454

2009

Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836

Rosochowski, A. and Olejnik, L. (2009) Ultrafine grains - a new option for light metals. Materials Technology, 24 (3). pp. 139-142. ISSN 1066-7857

Stack, M.M. and Abdulrahman, S. M. and Jana, B. D. (2009) A map and a pipe : a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling. In: EuroCorr 2009, 2009-09-06 - 2009-09-10.

Stack, Margaret and Abdelrahman, Shehab (2009) Some reflections on a model to predict the erosion rate of the passive film on pure metals. In: 13th International Conference on Aerospace Science and Aviation Technology, ASAT 2009, 2009-05-26 - 2009-05-28.

2008

Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836

Camilleri, Duncan (2008) Integrating finite element analysis in design and manufacture of welded structures. In: 17th Annual Conference on Marine Engineering: Beyond Our Shores, 2008-04-17 - 2008-04-17, Malta.

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, Cranfield.

Konkova, Tatyana (2008) Cryogenic severe deformation influence on the structure of copper. In: International Workshop on the Plasticity of Nanocrystalline Metals, 2008-09-28 - 2008-10-01, Lake Bostal.

Koop, Gary and Tole, Lise (2008) What is the environmental performance of firms overseas? : an empirical investigation of the global gold mining industry. Journal of Productivity Analysis, 30 (2). pp. 129-143. ISSN 0895-562X

Mathew, M.T. and Stack, M. M. and Matijevic, B. and Rocha, L.A. and Ariza, E. (2008) Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. Tribology International, 41 (2). pp. 141-149. ISSN 0301-679X

Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. Wear, 264 (9-10). pp. 826-837. ISSN 0043-1648

2007

Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836

Li, Y. and Wilson, J.A. and Craven, A.J. and Mitchell, P.S. and Crowther, D. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure. Materials Science and Technology, 23 (5). pp. 509-518. ISSN 0267-0836

Macdonald, Martin and Rhodes, James and Kotelko, Maria (2007) Stainless steel stub columns subject to combined bending and axial loading. Thin-Walled Structures, 45 (10-11). pp. 893-897. ISSN 0263-8231

McConnell, B.K. and Banks, W.M. and Doyle, G.T. and Hayward, D. and Pethrick, R.A. (2007) Ageing in non isothermal environments of adhesively bonded metal structures. In: 30th Annual Meeting of the Adhesion Society, 2007-02-01 - 2007-02-01.

Mollicone, Pierluigi and Camilleri, Duncan and Gray, Thomas (2007) Procedural influences on non-linear distortions in welded thin plate fabrication. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26.

Mridha, S. and Baker, T.N. (2007) Incorporation of 3 μm SiCp into Titanium surfaces using a 2.8 kW laser beam of 186 and 373 MJ m-2 energy densities in a nitrogen environment. Journal of Materials Processing Technology, 185 (1-3). pp. 38-45. ISSN 0924-0136

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, 23 (5). pp. 519-527. ISSN 0267-0836

2006

Antonov, Maksim and Stack, Margaret and Hussainova, Irina (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian Academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1736-7530

Galloway, A. and McPherson, Norman; (2006) Nitrogen retention/enrichment of 316LN austenitic steel welds. In: FabTech International Conference. Society of Manufacturing Engineers, pp. 281-283.

Galloway, A. and McPherson, Norman (2006) The effect of shielding gas composition on weld metal nitrogen retention in 316LN austenitic stainless steels. Welding and Cutting, 5 (4). pp. 225-230. ISSN 1612-3433

Galloway, Alexander M. and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic stainless steel welds. In: FabTech International Conference, 2011-06-20. (Unpublished)

Macdonald, Martin and Heiyantuduwa, M.A. and Rhodes, James; (2006) Finite element analysis of web crippling behaviour of cold-formed steel flexural members. In: Proceedings of the 18th International Speciality Conference on Cold Formed Steel Structures. University of Missouri-Rolla.

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2006) XRD and XPS studies of surface MMC layers developed by laser alloying Ti6Al4V using a combination of a dilute nitrogen environment and SiC powder. Surface and Coatings Technology, 201 (3-4). pp. 724-736. ISSN 0257-8972

Stack, Margaret and Antonov, Maksim and Hussainova, Irina (2006) Some views on the erosion-corrosion response of bulk chromium carbide based cermets. Journal of Physics D: Applied Physics, 39 (15). pp. 3165-3174. ISSN 1361-6463

2005

Antonov, Maksim and Stack, M.M. and Hussainova, Irina (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07.

Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. Wear, 259 (1-6). pp. 243-255. ISSN 0043-1648

Li, Y. and Baker, T.N. and Mitchell, P.S. (2005) Vanadium microalloyed steel for thin slab casting and direct rolling. Materials Science Forum, 500-501. pp. 237-244. ISSN 1662-9760

Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. Wear, 259 (1-6). pp. 256-262. ISSN 0043-1648

Stack, M.M. and Mathew, M.T. (2005) Transitions in microabrasion mechanisms for WC - Co (HVOF) coated steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 49-57. ISSN 1350-6501

Stack, Margaret and Jawan, H. and Mathew, M.T. and Mathew, Mathew T (2005) On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments. Tribology International, 38 (9). pp. 848-856. ISSN 0301-679X

2004

Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (2004) A generic model for dry sliding wear of metals at elevated temperatures. Wear, 256 (9/10). pp. 973-985. ISSN 0043-1648

Li, Y. and Wilson, J.A. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2004) The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels. ISIJ International, 44 (6). pp. 1093-1102. ISSN 0915-1559

Macdonald, Martin and Rhodes, J. (2004) Stainless steel stub columns subject to combined bending and axial loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05.

Qin, Y and Balendra, R (2004) An approach for the forming of large-thickness-flange components by injection forging. Journal of Materials Processing Technology, 145 (2). pp. 153-162. ISSN 0924-0136

Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system : some comments on particle size effects. Wear, 256 (5). pp. 557-564. ISSN 0043-1648

Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. Wear, 256 (9-10). pp. 986-1004. ISSN 0043-1648

Stack, M.M. and Jawan, H. and Mathew, M.T. (2004) Some thoughts on micro-abrasion mapping of steels in corrosive environments. In: 8th International Conference on Tribology, 2004-03-24 - 2004-03-27.

Stack, M.M. and Mathew, M.T. (2004) Some comments on micro-abrasion interactions for pure metals in bio-oils. Journal of Synthetic Lubrication, 21 (2). pp. 105-118. ISSN 0265-6582

Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. Wear, 256 (5). pp. 565-576. ISSN 0043-1648

Zhang, B. and Baker, T.N. (2004) Effect of heat treatment on the hot deformation behaviour of AA6082 alloy. Journal of Materials Processing Technology, 153-154. pp. 881-885. ISSN 0924-0136

2003

Roy, Mannish and Stack, Margaret (2003) An electrochemical technique to measure wear of metals in polymers in corrosive environments. In: Tribology - Science and Application Conference, 2003-04-23 - 2003-04-27.

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2003) XRD and XPS studies on surface MMC layer of SiC reinforced Ti-6Al-4V alloy. Journal of Materials Processing Technology, 142 (3). pp. 725-737. ISSN 0924-0136

Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. Wear, 255 (1-6). pp. 456-465. ISSN 0043-1648

Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. Wear, 255 (1-6). pp. 14-22. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. Wear, 255 (1-6). pp. 225-236. ISSN 0043-1648

Zhang, J. and Baker, T.N. (2003) Effect of equalisation time on the austenite grain size of simulated thin slab direct charged (TSDC) vanadium microalloyed steels. ISIJ International, 43 (12). pp. 2015-2022. ISSN 0915-1559

2002

Jiang, Jiaren and Stack, Margaret and Neville, Anne (2002) Modelling the tribo-corrosion interaction in aqueous sliding conditions. Tribology International, 35 (10). pp. 669-679. ISSN 0301-679X

Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N.; (2002) Evolution of precipitation in direct charged thin slab cast VoN and V-Ti-N steels. In: Proceedings of the Institute of Physics Conference: Electron Microscopy and Analysis Group Conference. Institute of Physics Conference series, 168 (11). Institute of Physics, Bristol, United Kingdom. ISBN 0750308125

Mathew, M.T. and Stack, M.M. (2002) Micro-abrasion interactions of pure metals in bio-oils. In: Third International Symposium on Fuels and Lubricants, 2002-10-07 - 2002-10-09.

Sing, W. and Baker, T.N.; (2002) Dry sliding wear behaviour of AA2014 alloy and AA2618 aluminium based composites. In: Proceedings of 1st International Conference on Materials Processing for Properties and Performance. UNSPECIFIED.

Stack, M.M. and Chi, K. (2002) Effect of preferential dissolution on erosion-corrosion for chromium steel in alkali slurry. Transactions of the Non-Ferrous Metal Society of China, 12 (5). pp. 931-935. ISSN 1003-6326

Stack, M.M. and Mathew, M.T. (2002) Micro-abrasion mapping of steels: some thoughts on the construction of micro-abrasion maps. In: International Conference on Materials and Tribology, 2002-09-12 - 2002-09-13.

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N.; Aindow, M. and Kiely, C.J., eds. (2002) Nanoanalysis of dispersion strengthening particles in thin slab cast vanadium microalloyed steels. In: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group (EMAG 2001 Conference). EMAG Conference Series, 168 . Institute of Physics, London, United Kingdom, pp. 187-190. ISBN 0-7503-0812-5

2001

Baker, T.N.; (2001) Quantitative metallography using transmission electron microscopy. In: 5th International Conference on Quantitive Microscopy of High Temperature Materials 2001. Maney Publishing, pp. 161-189. ISBN 1861251092

Li, Y. and Crowther, D. and Wilson, J.A. and Craven, A.J. and Baker, T.N. (2001) Precipitation in vanadium and vanadium-titanium microalloyed steels. Institute of Physics Conference Series, 168. pp. 183-187. ISSN 0951-3248

Li, Y. and Crowther, D.N. and Green, M.J.W. and Mitchell, P.S. and Baker, T.N. (2001) The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ International, 41 (1). pp. 46-55. ISSN 0915-1559

Lu, Q. and Stack, M.M. and Wiseman, C.R. (2001) AC impedence spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors. Journal of Applied Electrochemistry, 31 (12). pp. 1373-1379. ISSN 0021-891X

McPherson, N.A. and Chi, K. and Noriega-Martinez, I. and Baker, T.N. (2001) Autogeneous laser welding of dessimilar joints of stainless steel and carbon steel. In: Stainless Steel World 2001, 2001-11-13 - 2001-11-15.

Selamat, M.S. and Baker, T.N. and Watson, L.M. (2001) Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment. Journal of Materials Processing Technology, 113 (1-3). pp. 509-515. ISSN 0924-0136

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2001) Preferential erosive wear of droplet particles for cathodic arc/unbalanced magnetron sputtering CrN.NbN superlattice PVD coatings. Journal of Materials Science Letters, 20 (6). pp. 547-550. ISSN 0261-8028

2000

Lu, Q and Stack, M M and Wiseman, C R (2000) Corrosion behaviour and characterisation of iron in hot flowing Bayer liquors. Materials and Corrosion-Werkstoffe und Korrosion, 51 (10). pp. 705-711. ISSN 0947-5117

Wang, H W and Stack, M M (2000) The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles. Journal of Materials Science, 35 (21). pp. 5263-5273. ISSN 0022-2461

1999

Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X

Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. Wear, 235. pp. 484-496. ISSN 0043-1648

Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836

Stack, M.M. and Wang, H.W. and Munz, W.D. (1999) Some thoughts on the construction of erosion-corrosion maps for PVD coated steels in aqueous environments. Surface and Coatings Technology, 113 (1-2). pp. 52-62. ISSN 0257-8972

Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. Wear, 233-235. pp. 535-541. ISSN 0043-1648

Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. Wear, 233-235. pp. 542-551. ISSN 0043-1648

Wang, H.W. and Stack, M.M. (1999) The slurry erosive wear of physically vapour deposited TiN and CrN coatings under controlled corrosion. Tribology letters, 6 (1). pp. 23-36. ISSN 1023-8883

1998

Liu, H. and Stack, M.M. and Lyon, S.B. (1998) Reactive element effects on the ionic transport processes in Cr2O3 scales. Solid State Ionics, 109 (3-4). pp. 247-257. ISSN 0167-2738

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1998) The erosion-corrosion performance of mild steel and SA313-T22 steel in low velocity conditions. In: 3rd NACE Latin American Region Corrosion Conference, 1998-10-01.

Wang, H.W. and Stack, M.M. (1998) Corrosion of PVD TiN coatings under simultaneous erosion in sodium carbonate bicarbonate buffered slurries. Surface and Coatings Technology, 105 (1-2). pp. 141-146. ISSN 0257-8972

Wang, H.W. and Stack, M.M. (1998) Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buffer slurries containing alumina particles. Surface and Coatings Technology, 106 (1). pp. 1-7. ISSN 0257-8972

1997

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) Characterization of wear scar surfaces using combined three-dimensional topographic analysis and contact resistance measurements. Tribology International, 30 (7). pp. 517-526. ISSN 0301-679X

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. Wear, 203-204. pp. 615-625. ISSN 0043-1648

Reese, Jason (1997) Characterisation of the flow in the molten metal sump during direct chill aluminium casting. Metallurgical and Materials Transactions B, 28 (3). pp. 491-499. ISSN 1073-5615

Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. Wear, 203. pp. 474-488. ISSN 0043-1648

Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. Wear, 203. pp. 489-497. ISSN 0043-1648

Stack, Margaret and Pena, D.; (1997) Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites. In: Microscopy of Oxidation. Institute of Materials, GBR, pp. 757-765. ISBN 9781861250346

Stott, F.H. and Jiang, Jiaren and Stack, Margaret; Datta, P.K. and Burnell-Gray, J.S., eds. (1997) Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys. In: Advances in Surface Engineering. Advances in Surface Engineering, 1 . Royal Society of Chemistry, GBR, pp. 143-157. ISBN 0854047475

Wang, H.W. and Stack, Margaret; (1997) Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, GBR, p. 215. ISBN 978-1-86058-109-0

1996

Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836

Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836

Stack, Margaret (1996) Book Review : Fretting and Fatigue. [Review]

Stack, Margaret and Chacón-Nava, José G. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836

Zhou, S and Stack, M M and Newman, R C (1996) Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions. Corrosion Science, 38 (7). pp. 1071-1084. ISSN 0010-938X

Zhou, S. and Stack, M.M. and Newman, R.C. (1996) Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion - Houston Tx, 52 (12). pp. 934-946. ISSN 0010-9312

1995

Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093

Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. Wear, 186-187 (1). pp. 273-283. ISSN 0043-1648

Stack, M.M. and Lekatos, S. and Stott, F.H. (1995) Erosion-corrosion regimes : number, nomenclature and justification? Tribology International, 28 (7). pp. 445-451. ISSN 0301-679X

Stack, Margaret (1995) Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions. In: Workshop on Corrosion in Alumina Plants, 1995-06-06 - 1995-06-08.

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. Wear, 180 (1-2). pp. 91-99. ISSN 0043-1648

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836

Stott, F.H. and JORDAN, M P and LEKATOS, S and Stack, Margaret and Wood, G.C. (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. Wear, 186 (1). pp. 291-298. ISSN 0043-1648

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1995) A mathematical model for sliding wear of metals at elevated temperatures. Wear, 181-183 (1). pp. 20-31. ISSN 0043-1648

Stott, F.H. and LEKATOS, S and JORDAN, M P and Wood, G.C. and Stack, Margaret (1995) The interactions of sulphidation and particle erosion at high temperatures. Materials and Corrosion-Werkstoffe und Korrosion, 46 (5). pp. 261-270. ISSN 0947-5117

1994

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. Wear, 176 (2). pp. 185-194. ISSN 0043-1648

Smith, A. and Abed, A. and Edrees, H.J. and Hendry, A.; Hoffmann, M.J. and Becher, P.F. and Petzow, G., eds. (1994) Ceramic-matrix composites of silicon-nitride with conducting particles. In: Silicon Nitride 93: proceedings of the international conference on silicon nitride-based ceramics, Stuttgart, October 4-6, 1993. Key Engineering Materials, 89-91 . Trans Tech Publications, Aedermannsdorf, Switzerland, pp. 423-428. ISBN 0-87849-668-8

1993

Chacón-Nava, José G. and Stott, F.H. and Stack, Margaret (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. Wear, 162-164 (B). pp. 706-712. ISSN 0043-1648

1992

Stack, M.M. and Stott, F.H. and Wood, G.C. (1992) The effect of pre-oxidation of chromia and alumina forming alloys on erosion in laboratory simulated fluidized-bed conditions. Corrosion Science, 33 (6). pp. 965-983. ISSN 0010-938X

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the effect of pre-oxidation in erosion-corrosion environments. Journal of Physics D: Applied Physics, 25 (1A). A170-A176. ISSN 1361-6463

1991

Stack, Margaret and Stott, F.H. and Wood, G.C.; (1991) Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments. In: Heat Resistant Materials. ASM International, Ohio, USA, pp. 333-342. ISBN 978-0871704290

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion-corrosion mechanisms in fluidized bed environments : materials for combined cycle power plant. In: UNSPECIFIED.

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409

Stott, F.H. and Stack, Margaret and Wood, G.C.; (1991) The role of oxides in the erosion-corrosion of alloys in low velocity conditions. In: Corrosion-Erosion-Wear of Materials at Elevated Temperatures. National Association of Corrosion Engineers, NACE, Houston, Texas, Article 12, 1-16.

Stott, F.H. and Tiong, K.K. and Stack, Margaret (1991) The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions. In: The European Corrosion Congress, EUROCORR 91, 1991-10-21 - 1991-10-25.