Browse by Author or creator

Article

Bozkurt, Murat and Nash, David (2023) Stress linearization application of oblique nozzles with welded pad reinforcement in cylindrical pressure vessels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (5). pp. 1642-1654. ISSN 0954-4062

Macleod, Kenneth and Nash, David h. and Bow, David r. and Ma, Le (2023) Influence of heat treatments on the microstructure and mechanical properties of two fine Mg-Li-Y alloy wires for bioresorbable applications. Advanced Engineering Materials, 25 (4). 2201164. ISSN 1527-2648

Leishman, Grant and Nash, David and Yang, Liu and Dyer, Kirsten (2022) A novel approach for wind turbine blade erosion characterization : an investigation using surface gloss measurement. Coatings, 12 (7). 928. ISSN 2079-6412

Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2021) A comparison of stress analysis and limit analysis approaches for single and multiple nozzle combinations in cylindrical pressure vessels. International Journal of Pressure Vessels and Piping, 194 (Part B). 104563. ISSN 0308-0161

Nash, David and Leishman, Grant and MacKie, Cameron and Dyer, Kirsten and Yang, Liu (2021) A staged approach to erosion analysis of wind turbine blade coatings. Coatings, 11 (6). 681. ISSN 2079-6412

Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2020) Effect of the internal pressure and external loads on nozzles in cylindrical vessel. IOP Conference Series: Materials Science and Engineering, 938 (1). 012007. ISSN 1757-899X

Kyriakou, Faidon and Maclean, Craig and Dempster, William and Nash, David (2020) Efficiently simulating an endograft deployment : a methodology for detailed CFD analyses. Annals of Biomedical Engineering, 48 (10). pp. 2449-2465. ISSN 0090-6964

Uzzaman, Asraf and Lim, James B.P. and Nash, David and Roy, Krishanu (2020) Web crippling behaviour of cold-formed steel channel sections with edge-stiffened and unstiffened circular holes under interior-two-flange loading condition. Thin-Walled Structures, 154. ISSN 0263-8231

Kyriakou, Faidon and Dempster, William and Nash, David (2020) Analysing the cross-section of the abdominal aortic aneurysm neck and its effects on stent deployment. Scientific Reports, 10 (1). 4673. ISSN 2045-2322

Uzzaman, Asraf and Lim, James B.P. and Nash, David and Roy, Krishanu (2020) Cold-formed steel channel sections under end-two-flange loading condition: Design for edge-stiffened holes, unstiffened holes and plain webs. Thin-Walled Structures, 147. 106532. ISSN 0263-8231

Kyriakou, Faidon and Bow, David and Dempster, William and Brodie, Robbie and Nash, David (2020) Evaluation of a new approach for modelling full ring stent bundles with the inclusion of manufacturing strains. Annals of Biomedical Engineering, 48 (1). pp. 144-156. ISSN 0090-6964

Chen, Boshan and Roy, Krishanu and Uzzaman, Asraf and Raftery, Gary M. and Nash, David and Clifton, G. Charles and Pouladi, P. and Lim, James B.P. (2019) Effects of edge-stiffened web openings on the behaviour of cold-formed steel channel sections under compression. Thin-Walled Structures, 144. 106307. ISSN 0263-8231

Kyriakou, Faidon and Dempster, William and Nash, David (2019) A methodology to quantify the geometrical complexity of the abdominal aortic aneurysm. Scientific Reports, 9. 17379. ISSN 2045-2322

Macdonald, Hamish and Nash, David and Stack, Margaret M. (2019) Repeated impact of simulated hail ice on glass fibre composite materials. Wear, 432-433. 102926. ISSN 0043-1648

Abid, Muhammad and Nash, David Hugh and Javed, Saif and Wajid, Hafiz Abdul (2018) Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading – FEA study. International Journal of Pressure Vessels and Piping, 168. pp. 166-173. ISSN 0308-0161

Wang, Zewu and Han, Quanfeng and Nash, David H. and Fan, Haigui and Xia, Liangzhi (2018) Thermal buckling of cylindrical shell with temperature-dependent material properties : conventional theoretical solution and new numerical method. Mechanics Research Communications, 92. pp. 74-80. ISSN 1873-3972

Han, Quanfeng and Wang, Zewu and Nash, David H. and Liu, Peiqi (2017) Thermal buckling analysis of cylindrical shell with functionally graded material coating. Composite Structures, 181. pp. 171-182. ISSN 0263-8223

Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2017) Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition - part II : parametric study and proposed design equations. Thin-Walled Structures, 114. 92–106. ISSN 0263-8231

Uzzaman, Asraf and Lim, James B.P. and Nash, David and Young, Ben (2017) Effects of edge-stiffened circular holes on the web crippling strength of cold-formed steel channel sections under one-flange loading conditions. Engineering Structures, 139. 96–107. ISSN 0141-0296

Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2017) Web crippling behaviour of cold-formed steel channel sections with web holes subjected to Interior-one-flange loading condition-part I : experimental and numerical investigation. Thin-Walled Structures, 111. 103–112. ISSN 0263-8231

Anwar, Ali and Gorash, Yevgen and Dempster, William and Nash, David (2016) Deformed gap space using macro-micro FEA model and transferred into a CFD model. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). 61264. ISSN 1617-7061

Lian, Ying and Uzzaman, Md Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2016) Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part I: Tests and finite element analysis. Thin-Walled Structures, 107. pp. 443-452. ISSN 0263-8231

Lian, Ying and Uzzaman, Asraf and Lim, James B.P. and Abdelal, Gasser and Nash, David and Young, Ben (2016) Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations. Thin-Walled Structures, 107. pp. 489-501. ISSN 0263-8231

Uzzaman, Asraf and Wrzesien, Andrzej M. and Lim, James B.P. and Hamilton, Robert and Nash, David (2016) Design of top-hat purlins for cold-formed steel portal frames. Structures, 7. pp. 113-125. ISSN 2352-0124

Gislason, M. K. and Foster, E. and Main, D. and Fusiek, G. and Niewczas, P. and Bransby-Zachary, M. and Nash, D. H. (2016) Mechanical testing and modelling of the Universal 2 implant. Medical Engineering and Physics, 38 (6). pp. 511-517. ISSN 1873-4030

MacDonald, Hamish and Infield, David and Nash, David H. and Stack, Margaret M. (2016) Mapping hail meteorological observations for prediction of erosion in wind turbines. Wind Energy, 19 (4). pp. 777-784. ISSN 1095-4244

Abid, Muhammad and Khan, Ayesha and Nash, David Hugh and Hussain, Masroor and Wajid, Hafiz Abdul (2016) Optimized bolt tightening strategies for gasketed flanged pipe joints of different sizes. International Journal of Pressure Vessels and Piping, 139-140. pp. 22-27. ISSN 0308-0161

Abid, M. and Khan, A. and Nash, D.H. and Hussain, M. and Wajid, H.A. (2015) Simulation of optimized bolt tightening strategies for gasketed flanged pipe joints. Procedia Engineering, 130. pp. 204-213. ISSN 1877-7058

Loughlan, J. and Nash, David and Rhodes, James (2014) Coupled instabilities in metal structures. Thin-Walled Structures, 81. ISSN 0263-8231

Abid, Muhammad and Awan, Abdul Waheed and Nash, David (2014) Determination of load capacity of a nongasketed flange joint under combined internal pressure, axial and bending loading for safe strength and sealing. Journal of the Brazilian Society of Mechanical Sciences, 36 (3). pp. 477-490. ISSN 0100-7386

David-West, Opukuro and Nash, David and Banks, William (2014) Low velocity heavy mass impact response of singly curved composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (1). pp. 17-33. ISSN 1464-4207

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) A higher order control volume based finite element method to prodict the deformation of heterogeneous materials. Computers and Structures, 129. pp. 54-62. ISSN 0045-7949

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 110. p. 1. ISSN 0308-0161

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) On erosion issues associated with the leading edge of wind turbine blades. Journal of Physics D: Applied Physics, 46 (38). 383001. ISSN 1361-6463

Parvez, Shahid and Abid, Muhammad and Nash, David and Fawad, H. and Galloway, Alexander (2013) Effect of torch angle on arc properties and weld pool shape in stationary GTAW. Journal of Engineering Mechanics, 139 (9). pp. 1268-1277. ISSN 0733-9399

Darlaston, John and Nash, David (2013) Editorial Article. International Journal of Pressure Vessels and Piping, 108-109. p. 1. ISSN 0308-0161

Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161

Waseem, Affan and Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The influence of void size on the micropolar constitutive properties of model heterogeneous materials. European Journal of Mechanics - A/Solids, 40 (July-A). pp. 148-157. ISSN 0997-7538

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2013) Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition. Thin-Walled Structures, 65. pp. 34-48. ISSN 0263-8231

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The micropolar elastic behaviour of model macroscopically heterogeneous materials. International Journal of Solids and Structures, 50 (1). 246–255. ISSN 0020-7683

Gislason, Magnus Kjartan and Stansfield, Benedict and Bransby-Zachary, Marc and Hems, Tim and Nash, David (2012) Load transfer through the radiocarpal joint and the effects of partial wrist arthrodesis on carpal bone behaviour : a finite element study. Journal of Hand Surgery (European Volume), 37 (9). pp. 871-878. ISSN 1753-1934

Abid, Muhammad and Parvez, Shahid and Nash, David and Fawad, Hassan (2012) 3 Dimensional simulation of stationary gas tungsten arc welding of L-shape, V-shape and open-corner joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1354-1368. ISSN 2041-2975

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-Formed Steel Sections with Web Openings Subjected to Web Crippling under Two-Flange Loading Conditions — Part I : Tests and Finite Element Analysis. Thin-Walled Structures, 56. pp. 38-48. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions — Part II : Parametric study and proposed design equations. Thin-Walled Structures, 56. pp. 79-87. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Structures, 50 (1). pp. 76-86. ISSN 0263-8231

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Henderson, Emma and Nash, David and Dempster, William (2011) On the experimental testing of fine Nitinol wires for medical devices. Journal of the Mechanical Behavior of Biomedical Materials, 4 (3). pp. 261-268. ISSN 1751-6161

Abid, M. and Awan, A.W. and Nash, David (2010) Performance of a nongasketed flange joint combined internal pressure and bending loading. Journal of Engineering Mechanics, 136 (12). pp. 1519-1527.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Finite element model creation and stability considerations of complex biological articulation : the human wrist joint. Medical Physics, 32 (5). pp. 523-531. ISSN 0094-2405

Gislason, Magnus K. and Nash, D.H. and Nicol, A.C. and Kanellopoulos, A. and Bransby-Zachary, M. and Hems, T. and Condon, B. and Stansfield, B. (2009) A three-dimensional finite element model of maximal grip loading in the human wrist. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223 (7). pp. 849-861. ISSN 0954-4119

Williams, J.G. and Anley, R.E. and Nash, D.H. and Gray, T.G.F. (2009) Analysis of externally loaded bolted joints : analytical, computational and experimental study. International Journal of Pressure Vessels and Piping, 86 (7). pp. 420-427. ISSN 0308-0161

Abid, Muhammad and Nash, David (2009) Stamina of a non-gasketed flange joint under combined internal pressure, axial and bending loading : an experimental study. Journal of Pressure Vessel Technology, 131 (3). 031203-031210. ISSN 0094-9930

Abid, M. and Awan, A. W. and Nash, D. H. (2008) Stamina of a non-gasketed flange joint under combined internal pressure and axial loading. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222 (E3). pp. 143-155. ISSN 0954-4089

Gislason, Magnus K. and Nash, David H. and Stansfield, Benedict (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. Journal of Biomechanics, 41 (Supple). S147-S147. ISSN 0021-9290

Nash, D.H. (2008) Introduction - Professor Jim Rhodes, Founding Editor. Thin-Walled Structures, 46 (7-9). p. 703. ISSN 0263-8231

David-West, O.S. and Nash, D.H. and Banks, W.M. (2008) An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact. Composite Structures, 83 (3). pp. 247-258. ISSN 0263-8223

David-West, O.S. and Alexander, N.V. and Nash, David and Banks, William (2008) Energy absorption and bending stiffness in CFRP laminates : the effect of 45º plies. Thin-Walled Structures, 46 (7-9). pp. 860-869. ISSN 0263-8231

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2007) The determination and evaluation of Nitinol constitutive models for finite element analysis. Applied Mechanics and Materials, 7-8. pp. 81-88. ISSN 1660-9336

Abid, Muhammad and Nash, David (2006) Relaxation behaviour of a gasketed and non-gasketed bolted flanged pipe joint - A comparative study. WSEAS Transactions on Applied and Theoretical Mechanics, 1 (2). pp. 239-246. ISSN 1991-8747

Abid, Muhammad and Nash, David (2006) Structural strength: gasketed Vs non-gasketed flange joint under bolt up and operating condition. International Journal of Solids and Structures, 43 (14-15). pp. 4616-4629. ISSN 0020-7683

Nash, D.H. and Dempster, I. (2005) Modelling the sources of cracking of aircraft compressor vanes rings. Engineering Failure Analysis, 12 (5). pp. 699-710. ISSN 1350-6307

Abid, Muhammad and Nash, David (2005) FMEA of gasketed and non-gasketed bolted flanged pipe joints. Engineering Integrity, 17 (1). pp. 14-21. ISSN 1365-4101

Spence, J. and Nash, D.H. (2004) Milestones in pressure vessel technology. International Journal of Pressure Vessels and Piping, 81 (2). pp. 89-118. ISSN 0308-0161

Abid, M. and Nash, D.H. (2004) A parametric study of metal-to-metal contact flanges with optimised geometry for safe stress and no-leak conditions. International Journal of Pressure Vessels and Piping, 81 (1). pp. 67-74. ISSN 0308-0161

Nash, David and Abid, Muhammad (2004) Surface sensitivity study of non-gasketed flange joint. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 205-212. ISSN 0954-4089

Abid, Muhammad and Nash, David (2003) Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions. International Journal of Pressure Vessels and Piping, 80 (12). pp. 831-841. ISSN 0308-0161

Nash, D.H. and Spence, J. and Tooth, A.S. and Abid, Muhammad and Power, D.J. (2001) A parametric study of metal-to-metal full face taper-hub flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 791-797. ISSN 0308-0161

Nash, David and Abid, Muhammad (2000) Combined external load tests for standard and compact flanges. International Journal of Pressure Vessels and Piping, 77 (13). pp. 799-806. ISSN 0308-0161

Banks, W.M. and Nash, D.H. and Flaherty, A.E. and Fok, W.C. and Tooth, A.S. (2000) A simplified design approach to determine the maximum strains in a grp vessel supported on twin saddles. International Journal of Pressure Vessels and Piping, 77 (13). pp. 837-842. ISSN 0308-0161

Nash, D.H. and Flaherty, A.E. and Banks, W.M. and Fok, W.C. and Tooth, A.S. (2000) The design of twin-saddle supported multi-layered glass-reinforced plastic vessels - the development of a parametric equation for the maximum strain. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 214 (3). pp. 113-128. ISSN 1464-4207

Rhodes, J. and Nash, D.H. (1998) An investigation of web crushing behaviour in thin-walled beams. Thin-Walled Structures, 32 (1-3). pp. 207-230. ISSN 0263-8231

Nash, D.H. and Banks, W.M. and Bernaudon, F. (1998) Finite element modelling of sling-supported pressure vessels. Thin-Walled Structures, 30 (1-4). pp. 95-110. ISSN 0263-8231

Nash, D.H. and Banks, W.M. (1997) Numerical analysis of a sling support arrangement for grp composite pressure vessels. Composite Structures, 97. pp. 679-687. ISSN 0263-8223

Tooth, Alwyn and Nash, David (1986) The use of a microcomputer in the design of cylindrical pressure-vessels. International Journal of Pressure Vessels and Piping, 24 (1). pp. 1-12. ISSN 0308-0161

Book Section

Brough, Euan and Nash, David and Kazemi Amiri, Abbas Mehrad and Couturier, Philippe and Reis, Vitor Luiz; (2023) Development of a test rig for improved estimation of structural damping of wind turbine composite materials. In: Proceedings of ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2023. Proceedings of ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2023 . ASME, USA. ISBN 9780791887141

Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2021) Calculation of outer crack stress intensity factors for nozzle junctions in cylindrical pressure vessels using FCPAS. In: Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. Volume 2: Computer Technology and Bolted Joints; Design and Analysis, 2 . ASME, New York, NY.. ISBN 9780791885321

Bozkurt, Murat and Nash, David and Uzzaman, Asraf; (2019) Investigation of the stresses and interaction effects of nozzle-cylinder intersections when subject to multiple external loads. In: ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 3 . ASME, USA. ISBN 9780791858943

Uzzaman, Asraf and Lim, James B. P. and Nash, David and Yousefi, Amir M. and Young, Ben; (2018) Experimental and analytical studies of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018. Missouri University of Science and Technology, USA, pp. 163-178.

Uzzaman, Asraf and Lim, James B. P. and Nash, David and Yousefi, Amir M. and Young, Ben; (2018) Parametric studies and design recommendations of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018. Missouri University of Science and Technology, USA, pp. 179-189.

Gislason, Magnus Kjartan and Nash, David; Ebrahimi, Farzad, ed. (2012) Finite element modelling of a multi bone joint : The human wrist. In: Finite element analysis. InTech, Croatia, pp. 77-98. ISBN 9789535107699

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben; Liew, J Y Richard and Lee, Seiw Chin, eds. (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Research Publishing Services, National University of Singapore, Singapore, pp. 179-186. ISBN 9789810726157

Pugh, Alistair William and Hamilton, Robert and Nash, David and Otto, S.R.; (2010) Characterisation of the materials in golf ball construction for use in finite element analysis. In: Engineering Sport and Engineering Emotion. Procedia Engineering, 2 . International Sports Engineering Association, AUT, pp. 3234-3236.

Camilleri, D. and Gray, T.G.F. and Nash, D.H.; (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076

Nash, David H.; Rao, K.R., ed. (2008) UK Rules For Unfired Pressure Vessels. In: The Companion Guide to ASME Boiler and Pressure Vessel Code. ASME. ISBN 9780971902717

David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE (2007) An experimental study of the response of composite pipes under impact loading. In: Proceedings of the 17th (2007) international offshore and polar engineering conference. ISOPE, California, USA, pp. 3492-3497. ISBN 1880653680

MacLeod, N.A. and Fowler, N.K. and Nash, D.H.; (2007) Kinematic response of the wrist and forearm when subjected to a complex loading regime. In: Proceedings of the Fifth IASTED International Conference on Biomedical Engineering. ACTA Press, pp. 244-248. ISBN 9780889866485

Gislason, M.K. and Nash, D.H. and BARNES, R.; Lennon, A.B. and Prendergrast, P.J. and Lennon, A.B. and Prendergrast, P. J., eds. (2007) On the creation of a subject specific finite element model of the wrist joint. In: Proceedings of the 2007 Summer Workshop of the European Society of Biomechanics. Dublin: Trinity Centre for Bioengineering, pp. 122-124. ISBN 095485831X

Jin, M.M. and Nash, D.H. and Banks, W.M.; (2006) Impact loading on symmetrical and unsymmetrical hybrid composite laminates. In: Proceedings of the 14th Annual International Conference on Composites/NanoEngineering. ICCE. ISBN 0-9533991-0-9

Aziz, A. and Rhodes, J. and Macdonald, M. and Nash, D.H.; (2006) A detailed examination of interactive buckling in plain channel sections. In: Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures 2006. University of Missouri.

David-West, O.S. and Nash, D.H. and Banks, W.M.; (2005) Damage threshold and the impact characteristics of +/- 45° and +/- 60° CFRP laminates - Poster Presentation. In: Proceedings of the 4th International Conference on Advances in Experimental Mechanics. Trans Tech Publications. ISBN 0-87849-987-3

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle supported storage vessels - a parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., pp. 109-135. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle supported storage vessels - theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc., pp. 87-107. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle-supported storage vessels: A parametric study of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 109-138. ISBN 978-1-86058-401-5

Tooth, A.S. and Chan, G.C.M. and Spence, J. and Nash, D.H.; Banks, W.M. and Nash, D.H., eds. (2003) Horizontal saddle-supported storage vessels: Theoretical and experimental comparisons of plastic collapse loads. In: Pressure Equipment Technology: Theory and Practice. Professional Engineering Publishing Ltd., London and Bury St. Edmonds, UK, pp. 87-108. ISBN 978-1-86058-401-5

Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E.; (2002) A parametric study of alternative support systems for cylindrical GRP storage vessels. In: Proceedings of the Third Australasian Conference on Composite Materials ( ACCM-3). ASTM International, Auckland, New Zealand.

Abid, Muhammad and Nash, D.H. and Webjorn, Jan; Bache, M.R. and Blackmore, P.A. and Draper, J. and Edwards, J.H. and Roberts, P. and Yates, J.R., eds. (2000) The stamina of non-gasketed, flanged pipe connections. In: Fatigue 2000 - Fatigue and Durability Assessment of Materials, Components and Structures: Proceedings of the Fourth International Conference of the Engineering Integrity Society. EMAS Publishing, pp. 575-584. ISBN 1 901537 16 1

Conference or Workshop Item

Anwar, Ali A. and Ritos, Konstantinos and Gorash, Yevgen and Dempster, William and Nash, David (2016) Microflow leakage through the clearance of a metal-metal seal. In: ASME Pressure Vessels & Piping Conference 2016, 2016-07-17 - 2016-07-21, Hyatt Regency Vancouver.

Webley, Andrew and Yang, Liu and Nash, David (2016) Simulation of the heat transfer through fibrous insulation. In: 17th European Conference on Composite Materials, 2016-06-26 - 2016-06-30.

Anwar, Ali and Gorash, Yevgen and Dempster, William and Hamilton, Robert and Nash, David (2016) Effect of high temperature on structural behaviour of metal-to-metal seal in a pressure relief valve. In: 23rd International Conference on Fluid Sealing 2016, 2016-03-02 - 2016-03-03.

Uzzaman, Asraf and Wrzesien, Andrzej and Hamilton, Robert and Lim, James B.P. and Nash, David (2014) Numerical investigation of cold-formed steel top-hat purlins. In: 22nd Specialty Conference on Cold-Formed Steel Structures, CCFSS 2014, 2014-11-05 - 2014-11-06, Missouri.

Uzzaman, Asraf and Wrzesien, A.M. and Hamilton, Robert and Lim, JBP and Nash, David (2013) Investigation of cold-formed steel top-hat sections under bending. In: 14th International Conference on Civil, Structural and Environmental Engineering Computing, ICC2013, 2013-09-03 - 2013-09-06.

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2013) Numerical modelling of hailstone impact on the leading edge of a wind turbine blade. In: EWEA Annual Wind Energy Event 2013, 2013-02-04 - 2013-02-07.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Experimental and analytical studies of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Parametric studies and design recommendations of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: 21st International Specialty Conference on Cold Formed Steel Structures, 2012-10-24 - 2013-03-25.

Keegan, Mark Hugh and Nash, David and Stack, Margaret (2012) Modelling rain drop impact on offshore wind turbine blades. In: ASME Turbo Expo 2012, 2012-06-11 - 2012-06-15.

Gislason, Magnus Kjartan and Stansfield, Benedict and Nash, David (2011) Computational modelling of the wrist. In: Annual UK Hand & Wrist Network Meeting, 2011-09-01 - 2011-09-02.

Abid, Muhammad and Khan, Kamran Ahmed and Chatta, Javed Ahmad and Nash, David (2011) Leakage analysis of gasketed flange joints under combined internap pressure and thermal loading. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.

Gislason, Magnus Kjartan and Nash, David (2011) Total wrist arthroplasty : A finite element study. In: 23rd Congress of the International Society of Biomechanics, 2011-07-03 - 2011-07-07.

Abid, Muhammad and Nash, David and Parvez, Shahid and Fawad, Hassan (2011) Simulation of stationary GTAW process using argon as shielding gas : effect of electrode angle and tip angles in butt welding. In: 8th International Bhurban Conference on Applied Science and Technology, IBCAST08, 2011-01-10 - 2011-01-13.

Parvez, Shahid and Abid, Muhammad and Fawad, Hassan and Nash, David (2010) The effect of electrode tip angle on arc and anode temperature in GTAW. In: 7th Jordanian International Mechanical Engineering Conference, JIMEC'7, 2010-09-27 - 2010-09-29.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) Effects of partial wrist arthrodesis on loading at the radiocarpal joints. In: 17th Congress of the European Society of Biomechanics, 2010-07-05 - 2010-07-08. (Unpublished)

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2010) The importance of the radiotriquetral ligament for proximal row stability in the wrist : a finite element study. In: 9th International Symposium in Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 2010-02-24 - 2010-02-27.

Nash, D H and Hitchen, J (2009) Effects of local reinforcement on nozzles in dished ends. In: 12th International Conference on Pressure Vessel Technology, ICPVT-12, 2009-09-20 - 2009-09-23.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2009) Impact characterisation of doubly curved composite structure. In: 17th International Conference on Composite Materials, ICCM17, 2009-07-27 - 2009-07-31. (Unpublished)

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. (2009) Loading on the Scapho-Trapezium-Trapezoid joint during gripping. In: 22nd Congress of the International Society of Biomechanics, 2009-07-05 - 2009-07-09.

Beveridge, A. J. and Wheel, M. A. and Nash, D. H. (2009) Computational modelling and experimental characterisation of heterogeneous materials. In: 3rd International Conference on Advanced Computational Engineering and experimenting, ACE-X 2009, 2009-06-22 - 2009-06-23.

Gislason, M.K. and Stansfield, B.W. and Nash, D.H. and Hems, Tim and Bransby-Zachary, Marc (2009) Ulnar variance and load transfer in the forearm during maximal grip: a finite element study. In: Combined Scientific Meeting of the British and American Societies of Surgery of the Hand, 2009-04-30 - 2009-05-02.

Gislason, Magnus Kjartan and Nash, David (2008) In vivo contact stresses at the radiocarpal joint using a finite element method of the complete wrist joint. In: 16th Congress of the European Society of Biomechanics, 2008-07-06 - 2008-07-09.

Gislason, M.K. and Nash, D.H. (2008) Using finite element method in preoperative planning for wrist surgery. In: Engineering the Upper Limb: Patient Specific Surgical Planning and Implementation, 2008-04-23 - 2008-04-24.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2008) Modelling a Nitinol device for the repair of abdominal aortic aneurysms. In: Proceedings of the ASM International Conference on Shape Memory and Superelastic Technologies, 2006-05-07 - 2006-05-11.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. (2007) The effect of variance in input parameters for Nitinol constitutive models in FE analysis. In: International Conference on Shape Memory and Superelastic Technologies, 2007-12-03 - 2007-12-05. (Unpublished)

Gislason, M.K. and Kanellopoulos, A. and Barnes, R. and Nash, D.H. (2007) The effect of anatomical variations on the load transfer characteristics of the wrist during gripping. In: XI Congress of the Federation of the European Societies for Surgery of the Hand, 2006-06-28 - 2006-06-30.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2007) A study of repeated impact loading on a symmetrical carbon fibre laminate. In: 16th International Conference on Composite Materials, 2011-07-20.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Using finite element analysis to model the behaviour of an endovascular device - Poster Presentation. In: Proceedings of the UK Society for Biomaterials Conference, 2006-06-21 - 2006-06-22.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2006) Development of a finite element model to analyse the proximal ring of an endovascular device. In: 2006 International ANSYS Conference, 2006-05-02 - 2006-05-04.

McCummiskey, E. and Dempster, W.M. and Nash, D.H. and Ashton, T.R. and Stevenson, D.G. (2005) Development of a preliminary finite element model to analyse the proximal ring of an endovascular device. In: UK ANSYS User Conference 2005, 2005-11-15 - 2005-11-16.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) Detecting the perforation threshold of curved symmetrical CFRP composite panels. In: The 12th International Conference on Composites and Nano Engineering (ICCE-12), 2005-08-01 - 2005-08-06.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2005) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: The 15th International Conference on Composite Materials, ICCM 15, 2005-06-27 - 2005-07-01.

David-West, O.S. and Nash, D.H. and Banks, W.M. ISOPE , ed. (2005) The effect of surface ply stiffness on the energy absorption of curved carbon fibre composites. In: 15th International Offshore and Polar Engineering Conference, 2005-06-19 - 2005-06-24.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates. In: ASC/ASTM-D30 Joint 19th Annual Technical Conference, 2004-10-17 - 2004-10-20.

Tanimura, K. and Ujihashi, Sadayuki and Nash, David and Dempster, William (2004) Finite element analysis of the radial force cariation of a ring stent. In: JSME Mechanical Engineering Congress 2004, 2004-09-10 - 2004-09-11.

Abid, Muhammad and Nash, David (2004) Stress variation in flange of a non-gasketed flanged pipe joint during bolt up and operating conditions. In: 4th International Conference on Advanced Engineering Design, 2004-09-05 - 2004-09-08.

David-West, O.S. and Nash, D.H. and Banks, W.M. (2004) The effect of ply orientation on the peak and delamination threshold loads of CFRP composite plates - Poster Presentation. In: The 2nd International Conference on Composites Testing and Model Identification, CompTest 04, 2004-09-21 - 2004-09-23.

Russell, C. and Nash, D.H. (2004) Development of a web-based interface for the automatic finite element analysis of pressure vessels. In: ASME Pressure Vessels and Piping Conference, 2004-07-25 - 2004-07-29.

Spence, J. and Nash, D.H. (2003) Parametric plastic collapse loads and their validation for horizontal saddle supported storage vessels. In: International Conference on Design, Inspection, Maintenance and Operation of Cylindrical Steel Tanks and Pipelines, 2003-10-08 - 2003-10-11.

Nash, D.H. and Spence, J. (2003) The buckling and collapse behaviour of saddle-supported cylinders - Keynote Lecture. In: 10th Symposium on Stability of Structures, 2003-09-08 - 2003-09-12.

Nash, D.H. and Banks, W.M. (2003) Eliminating local strain concentrations on GRP beam supported transportation. In: 10th International Conference on Pressure Vessel Technology (ICPVT-10), 2003-07-07 - 2003-07-10.

Nash, D.H. and Spence, J. and Tooth, A.S. (2003) On the plastic collapse of horizontal saddle supported storage vessels. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, Design by Analysis, 2003-07-07 - 2003-07-10.

Spence, J. and Nash, D.H. (2003) Some milestones in pressure vessel technology: The Nichols Memorial Lecture - Keynote Lecture. In: Proceedings of the 10th International Conference on Pressure Vessel Technology, 2003-07-07 - 2003-07-10.

Wood, J. and Nash, D.H. (2003) Some observations on the education and professional development of finite element users. In: Proceedings of the NAFEMS World Congress on Innovative Engineering Simulation Technology, 2003-05-27 - 2003-05-31.

Nash, D.H. (2002) Differences between EN13445 and other international standards. In: Pressure Equipment in Europe Conference, 2002-11-19 - 2002-11-20.

Abid, Muhammad and Nash, David and Webjorn, Jan (2002) Risk assessment studies of gasketed and non-gasketed bolted pipe joints. In: Proceedings of the 4th ASME International Pipelines Conference, 2002-10-01.

Nash, D.H. (2002) Co-ordination and dissemination of European pressure equipment research. In: Opportunities in research and development for the pressure equipment industry, 2002-01-01.

Nash, D.H. and Banks, W.M. and Tooth, A.S. and Flaherty, A.E. (2002) Manufacturing considerations in the support of large GRP storage vessels. In: Sixth International Conference on Flow Process in Composite Materials (FPCM-6), 2002-07-15 - 2002-07-17.

Tamiaki, M. and Nash, D.H. and Tooth, A.S. (2001) The finite element modelling of horizontal vessels used for storing hot fluids. In: Proceedings of the 4th International Congress on Thermal Stresses, 2001-06-08 - 2001-06-11.

Banks, W.M. and Nash, D.H. and Tooth, A.S. and Flaherty, A.E. (2001) Design optimisation studies on composite pressure vessels and piping to ensure long term structural integrity. In: Structural Integrity of Composite Materials and Structures: Optimisation of Micro-structural Design, 2001-05-20 - 2001-05-25.

Rhodes, J. and Nash, D.H. and Macdonald, Martin (1999) An examination of web crushing in thin-walled beams. In: The Fourth International Conference on Steel and Aluminium Structures, 1999-06-20 - 1999-06-23.

Book

Abid, Muhammad and Nash, David (2009) Design optimization and analysis techniques. VDM Verlag, Saarbrücken, Germany. ISBN 9783639197334, 363919733X

Earland, Simon and Nash, David and Garden, W. (2003) Guide to European pressure equipment: the complete reference source. Professional Engineering : Published in association with Roles & Associates, Bury St. Edmunds, UK. ISBN 1860583458

Banks, W.M. and Nash, D.H. (2003) Pressure Equipment Technology: Theory and Practice. John Wiley & Sons Inc.. ISBN 978-1-86058-401-5

Patent

Brodie, Robbie (2014) Computer-implemented method of simulating performance of e.g. endovascular stent-graft, involves partitioning model such that material models simulate material behaviour in units of object model of super elastic tension and compression. WO 2014184591-A1 WOGB 051533.