Browse by Author or creator

Group by: Publication Date | Item type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item

Number of items: 52.

Article

Lewandowski, Karol and Barbera, Daniele and Blackwell, Paul and Roohi, Amir H. and Athanasiadis, Ignatios and McBride, Andrew and Steinmann, Paul and Pearce, Chris and Kaczmarczyk, Łukasz (2023) Multifield finite strain plasticity : theory and numerics. Computer Methods in Applied Mechanics and Engineering, 414. 116101. ISSN 0045-7825

Peters, Sean and Andreu, Aurik and Perez, Marcos and Blackwell, Paul (2023) Improving forging outcomes of cast titanium aluminide alloy via cyclic induction heat treatment. Metals, 13 (8). 1420. ISSN 2075-4701

Peters, Sean and Perez, Marcos and Blackwell, Paul (2023) Integrating HIP and homogenisation heat treatment and its effect on the workability of a conventional peritectic TiAl alloy. Intermetallics, 158. 107884. ISSN 0966-9795

McPhillimy, Michael and Yakushina, Evgenia and Blackwell, Paul (2022) Tailoring titanium sheet metal using laser metal deposition to improve room temperature single-point incremental forming. Materials, 15 (17). 5985. ISSN 1996-1944

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

Kwame, JS and Yakushina, E and Blackwell, P (2021) Influence of longitudinal scratch defects on the bendability of titanium alloy. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-4.

Smith, Eleanor and McRae, Kenneth and Semple, Gordon and Welsh, Hugh and Evans, Dorothy and Blackwell, Paul (2021) Enhancing vocational training in the post-COVID era through mobile mixed reality. Sustainability, 13 (11). 6144. ISSN 2071-1050

Hicks, C. and Konkova, T. and Blackwell, P. (2020) Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates. Materials Characterization, 170. 110675. ISSN 1044-5803

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Prediction of hole expansion ratio of titanium alloys using R programming. Journal of Modeling and Optimization, 12 (2). pp. 125-137. ISSN 1759-7676

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences, 2. 1999. ISSN 2523-3971

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Influence of sheet conditions on in-plane strain evolution via ex-situ tensile deformation of Ti-3Al-2.5V at room temperature. Journal of Materials and Applications, 10 (1). pp. 15-26. ISSN 2051-7750

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Effect of edge conditions on the formability of commercially pure titanium sheet (Grade 2) at room temperature. MATEC Web of Conferences, 321. 04027. ISSN 2261-236X

Hicks, C. and Konkova, T. and Blackwell, P. (2020) Microstructure development in Laser Metal Deposition of Ti-5553. MATEC Web of Conferences, 321. 03019. ISSN 2261-236X

Mandal, Paranjayee and Gomez-Gallegos, Ares and Gonzalez, Diego and Elrakayby, Hosam and Blackwell, Paul (2020) Superplastic behaviour of Ti54M and Ti64. MATEC Web of Conferences, 321. 04028. ISSN 2261-236X

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2018) Industrial validation of strain in cold roll forming of UHSS. Procedia Manufacturing, 15. pp. 788-795. ISSN 2351-9789

Gomez Gallegos, Ares Argelia and Mandal, Paranjayee and Gonzalez, Diego and Zuelli, Nicola and Blackwell, Paul (2018) Studies on titanium alloys for aerospace application. Defect and Diffusion Forum, 385. pp. 419-423. ISSN 1662-9507

Bylya, Olga I. and Khismatullin, Timur and Blackwell, Paul and Vasin, Rodolf A. (2018) The effect of elasto-plastic properties of materials on their formability by flow forming. Journal of Materials Processing Technology, 252. pp. 34-44. ISSN 0924-0136

Bylja, Olga and Gomez-Gallegos, Ares and Stefani, Nicola and Blackwell, Paul (2017) Al-Li alloys – the analysis of material behaviour during industrial hot forging. Procedia Engineering, 207. pp. 7-12. ISSN 1877-7058

Guillot, M. and McCormack, T. and Tuffs, M. and Rosochowski, A. and Halliday, S. and Blackwell, P. (2017) Shear forming of 304L stainless steel – microstructural aspects. Procedia Engineering, 207. 1719–1724. ISSN 1877-7058

Tsang, Kwun Sing and Ion, William and Blackwell, Paul and English, Martin (2017) Validation of a finite element model of the cold roll forming process on the basis of 3D geometric accuracy. Procedia Engineering, 207. pp. 1278-1283. ISSN 1877-7058

Huang, Jianglin and Slater, Carl D. and Mandral, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207. pp. 478-483. ISSN 1877-7058

Tamimi, Saeed and Sivaswamy, Giribaskar and Violatos, Ioannis and Moturu, Shanmukha Rao and Rahimi, Salah and Blackwell, Paul (2017) Modelling and experimentation of the evolution of texture in an Al-Mg alloy during earing cupping test. Procedia Engineering, 207. pp. 1-6. ISSN 1877-7058

Bylja, Olga and Reshetov, Aleksey and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2017) Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys. Procedia Engineering. ISSN 1877-7058 (In Press)

Stefani, Nicola and Bylya, Olga and Reshetov, Aleksey and Blackwell, Paul (2017) On the applicability of JMAK-type models in predicting IN718 microstructural evolution. Computer Methods in Materials Science, 17 (1). pp. 59-68. ISSN 1641-8581

Krishnamurthy, Bhaskaran and Bylya, Olga and Muir, Lisa and Conway, Alastair and Blackwell, Paul (2017) On the specifics of modelling of rotary forging processes. Computer Methods in Materials Science, 17 (1). pp. 22-29. ISSN 1641-8581

Khayatzadeh, Saber and Rahimi, Salah and Blackwell, Paul (2016) Effect of plastic deformation on elastic and plastic recovery in CP-Titanium. Key Engineering Materials, 716. 891 - 896. ISSN 1013-9826

Mohamed, Mohamed and Carty, David and Storr, John and Zuelli, Nicola and Blackwell, Paul and Savings, David (2016) Feasibility study of complex sheet hydroforming process : experimental and modelling. Key Engineering Materials, 716. pp. 685-691. ISSN 1013-9826

Reshetov, Aleksey and Bylja, Olga and Gzyl, Michal and Rosochowska, Malgorzata and Blackwell, Paul (2016) Modelling microstructure evolution in ATI 718Plus® alloy. Key Engineering Materials, 716. pp. 352-359. ISSN 1013-9826

Bylya, O.I. and Sarangi, M.K. and Rohit, N. and Nayak, A. and Vasin, R.A. and Blackwell, P.L. (2015) Simulation of the material softening during hot metal forming. Archives of Metallurgy and Materials, 60 (3A). pp. 1887-1893. ISSN 2300-1909

Bylja, O.I. and Pradhan, B.K. and Yakushina, E.B. and Blackwell, P.L. and Vasin, R.A. (2014) Modelling of active transformation of microstructure of two-phase Ti alloys during hot working. Letters on Materials, 4 (2). pp. 124-129. ISSN 2410-3535

Eipert, Irena and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Siddiq, Amir and Blackwell, Paul (2014) Improvement in ductility in commercially pure titanium alloys by stress relaxation at room temperature. Key Engineering Materials, 611-612. pp. 92-98. ISSN 1013-9826

Bylya, Olga and Sarangi, M K and Ovchinnikova, N V and Vasin, R A and Yakushina, E B and Blackwell, P L (2014) FEM Simulation of microstructure refinement during severe deformation. IOP Conference Series: Materials Science and Engineering, 63. 012033. ISSN 1757-899X

Wood, Paul and Qarni, Muhammad Jawad and Blackwell, Paul and Cerny, Vladimir and Brennand, Phillip and Wilkinson, Steven and Rosochowski, Andrzej (2013) Modelling the superplastic forming of a multi-sheet diffusion bonded titanium alloy demonstrator fan blade. Materials Science Forum, 735. pp. 215-223. ISSN 1662-9760

Book Section

Krishnamurthy, Bhaskaran and Shitikov, Andrei and Blackwell, Paul and Bylya, Olga; Madej, Lukasz and Sitko, Mateusz and Perzynsk, Konrad, eds. (2023) Influence of mesh in modelling of flow forming process. In: Materials Research Proceedings. UNSPECIFIED, POL, pp. 1583-1592. ISBN 9781644902479

Balan, Marius and Majecki, Pawel and Grimble, Michael and Blackwell, Paul; (2022) Multiple degrees of freedom active motion control of a hydraulically actuated crane. In: OCEANS 2021. Oceans Conference Record (IEEE) . Institute of Electrical and Electronics Engineers Inc., USA, pp. 1-6. ISBN 9780692935590

Kwame, J. S. and Yakushina, E. and Blackwell, P.; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Effect of machining induced microstructure changes on the edge formability of titanium alloys at room temperature. In: Forming the Future. The Minerals, Metals & Materials Series . Springer, USA, pp. 2695-2704. ISBN 9783030753818

Krishnamurthy, Bhaskaran and Bylja, Olga and Watt, Kyle and Conway, Alastair and Tuffs, Martin and Blackwell, Paul; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Instability analysis in incremental rotary forming of tube flanges. In: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Minerals, Metals and Materials Series . Springer, USA, pp. 403-415. ISBN 9783030753818

Reshetov, A. and Stefani, N. and Bylya, O. and Krishnamurthy, B. and Blackwell, P.; Tin, Sammy and Hardy, Mark and Clews, Justin and Cormier, Jonathan and Feng, Qiang and Marcin, John and O'Brien, Chris and Suzuki, Akane, eds. (2020) Aspects of high strain rate industrial forging of Inconel 718. In: Superalloys 2020. The Minerals, Metals & Materials Series . Springer, Cham, Switzerland, 461 - 470. ISBN 978-3-030-51834-9

Smith, Eleanor and Semple, Gordon and Evans, Dorothy and McRae, Kenneth and Blackwell, Paul; Chen, Jessie Y. C. and Fragomeni, Gino, eds. (2020) Augmented instructions : analysis of performance and efficiency of assembly tasks. In: Virtual, Augmented and Mixed Reality. Industrial and Everyday Life Applications. Lecture Notes in Computer Science . Springer, Cham, pp. 166-177. ISBN 978-3-030-49698-2

Ntovas, Michail and Blackwell, Paul; Brabazon, Dermot and Naher, Sumsun and Ul Ahad, Inam, eds. (2017) A new high and moderate speed servo-hydraulic forging simulator capabilities and process optimization. In: Proceedings of the 20th International ESAFORM Conference on Material Forming. AIP Conference Proceedings, 1896 . AIP Publishing, ISL. ISBN 978-0-7354-1580-5

Allan, Michael and Thomas, Matthew and Brooks, Jeffery and Blackwell, Paul; Venkatesh, Vasisht and Pilchak, Adam L. and Allison, John E. and Ankem, Sreeramaurthy and Boyer, Rodney and Christodoulou, Julie and Fraser, Hamish L. and Imam, M. Ashraf and Kosaka, Yoji and Rack, Henry J. and Chaterjee, Amit and Woodfield, Andy, eds. (2016) β Recrystallisation characteristics of α + β titanium alloys for aerospace applications. In: Proceedings of the 13th World Conference on Titanium. John Wiley & Sons Inc., USA, pp. 203-208. ISBN 9781119293668