Browse by Author or creator

Article

Li, Jianxun and Wang, Minghang and Li, Ying and Chen, Haofeng and Zhang, Tairui and Wang, Weiqiang (2023) On the evaluation of uniaxial tensile and fracture properties of Ti‐6Al‐4V by spherical indentation tests with different calculation models. Fatigue and Fracture of Engineering Materials and Structures, 46 (10). pp. 4053-4072. ISSN 8756-758X

Bao, Hongchen and Shen, Jun and Peng, Heng and Liu, Yinghua and Chen, Haofeng (2023) Elastic core concept for modified Bree problems considering in-phase and out-of-phase loading conditions. International Journal of Pressure Vessels and Piping, 202. 104913. ISSN 0308-0161

Wang, Xiaoxiao and Yang, Jie and Chen, Haofeng and Zhiyuan, M.A. and Xuan, Fuzhen (2023) Effect of constraint on cyclic plastic behaviours of cracked bodies and the establishment of unified constraint correlation. European Journal of Mechanics - A/Solids, 97. 104857. ISSN 0997-7538

Chen, Xiaohui and Liu, Yang and Zhu, Lin and Lang, Lang and Chen, Haofeng (2022) Shakedown limit of elbow pipe under coupled cyclic thermal-mechanical loading based on the LMM. International Journal of Pressure Vessels and Piping, 199. 104747. ISSN 0308-0161

Shen, Jun and Ma, Zhiyuan and Chen, Haofeng (2022) Shakedown and ratcheting analysis of Printed Circuit Heat Exchangers under multiple cyclic mechanical and thermal loads. International Journal of Pressure Vessels and Piping, 199. 104723. ISSN 0308-0161

Wang, Xiaoxiao and Ma, Zhiyuan and Chen, Haofeng and Liu, Yinghua and Shi, Duoqi and Yang, Jie (2022) Creep rupture limit analysis for engineering structures under high-temperature conditions. International Journal of Pressure Vessels and Piping, 199. 104763. ISSN 0308-0161

Dai, Yanwei and Qin, Fei and Liu, Yinghua and Chen, Haofeng (2022) Influences of material mismatch on interface crack tip field in three layered creeping materials. Engineering Failure Analysis, 140. 106523. ISSN 1350-6307

Bao, Hongchen and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2022) Shakedown analysis and assessment method of four-stress parameters Bree-type problems. International Journal of Mechanical Science, 229. p. 107518. 107518. ISSN 0020-7403

Chen, Ying and Luan, Weiling and Chen, Haofeng and Zhu, Xuanchen (2022) 基于应力场的锂离子电池正极多尺度失效研究. Wuji Cailiao Xuebao/Journal of Inorganic Materials, 37 (8). pp. 918-924. ISSN 1000-324X

Li, Jianxun and Wang, Minghang and Chen, Haofeng and Wang, Pengfei and Wang, Weiqiang (2022) Investigation on characteristics of tensile damage and microstructure evolution of steel AISI 316L by nonlinear ultrasonic Lamb wave. International Journal of Pressure Vessels and Piping, 198. 104680. ISSN 0308-0161

Puliyaneth, Manu and Chen, Haofeng (2022) Creep-cyclic plasticity and damage assessment of an SS304 weldolet. Journal of Pressure Vessel Technology, Transactions of the ASME, 144 (2). 021505. ISSN 0094-9930

Peng, Heng and Liu, Yinghua and Chen, Haofeng and Zhang, Zhengming (2022) Shakedown analysis of bounded kinematic hardening engineering structures under complex cyclic loads : theoretical aspects and a direct approach. Engineering Structures, 256. 114034. ISSN 0141-0296

Chen, Ying and Luan, Weiling and Zhu, Xuanchen and Chen, Haofeng (2022) Mechanical degradation behavior of single crystal LiNixMnyCozO2 cathode in li-ion battery by indentation analysis. Journal of Pressure Vessel Technology, 144 (5). 051505. ISSN 0094-9930

Cho, Nak-Kyun and Choi, Youngjae and Chen, Haofeng (2022) Creep-fatigue interaction effects on pressure-reducing valve under cyclic thermo-mechanical loadings using direct cyclic method. Journal of Pressure Vessel Technology, 144 (1). 011507. ISSN 0094-9930

Puliyaneth, Manu and Chen, Haofeng (2021) Study on the effect of welding residual stress on creep-cyclic plasticity behaviour. International Journal of Pressure Vessels and Piping, 193. 104444. ISSN 0308-0161

Dai, Yanwei and Qin, Fei and Liu, Yinghua and Chen, Haofeng and Berto, Filippo (2021) Characteristics and implications of material mismatch on mode II creep crack tip field : theoretical analysis and numerical investigation. Theoretical and Applied Fracture Mechanics, 114. 103035. ISSN 0167-8442

Bao, Hongchen and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2021) Shakedown analysis of modified Bree problems involving thermal membrane stress and generalized loading conditions. International Journal of Pressure Vessels and Piping, 192. 104432. ISSN 0308-0161

Peng, Heng and Liu, Yinghua and Chen, Haofeng (2021) Creep rupture assessment of cyclically heated 3D pressure pipelines with volumetric defects using a direct numerical approach. International Journal of Pressure Vessels and Piping, 192. 104387. ISSN 0308-0161

Dai, Yanwei and Qin, Fei and Liu, Yinghua and Berto, Filippo and Chen, Haofeng (2021) Characterizations of material constraint effect for creep crack in center weldment under biaxial loading. International Journal of Fracture. ISSN 0376-9429

Liu, Fang and Gong, Jian-Guo and Chen, Haofeng and Xuan, Fu-Zhen (2021) A direct approach to progressive buckling design considering ratcheting deformation. Thin-Walled Structures, 163. 107656. ISSN 0263-8231

Chen, Ying and Chen, Haofeng and Luan, Weiling (2021) Shakedown, ratcheting and fatigue analysis of cathode coating in lithium-ion battery under steady charging-discharging process. Journal of the Mechanics and Physics of Solids, 150. 104366. ISSN 0022-5096

Song, Yuxuan and Ma, Yi and Chen, Haofeng and He, Zhibo and Chen, Hu and Zhang, Taihua and Gao, Zengliang (2021) The effects of tensile and compressive dwells on creep-fatigue behavior and fracture mechanism in welded joint of P92 steel. Materials Science and Engineering: A, 813. 141129. ISSN 0921-5093

Shi, Duoqi and Liu, Changqi and Cheng, Zhen and Li, Zhenlei and Yang, Xiaoguang and Chen, Haofeng (2021) On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures : mesoscale analysis and in situ experimental investigation. Ceramics International, 47 (9). pp. 12680-12694. ISSN 0272-8842

Zhu, Xuanchen and Chen, Haofeng and Luan, Weiling (2021) On the study of cyclic plasticity behaviour of primary electrode particle for lithium-ion battery. European Journal of Mechanics - A/Solids, 86. 104175. ISSN 0997-7538

Chen, Xiaohui and Zhuang, Kunmin and Zhu, Xuanchen and Chen, Haofeng (2021) Limit load, shakedown and ratchet analysis of pressurized lateral nozzle. Smart Structures and Systems, 27 (3). pp. 421-434. ISSN 1738-1991

Dai, Yue and Yang, Jie and Chen, Haofeng (2021) 核电安全端结构中材料拘束的作用范围研究. Acta Metallurgica Sinica. ISSN 0412-1961 (In Press)

Ma, Zhiyuan and Wang, Xiaoxiao and Chen, Haofeng and Xuan, Fu-Zhen and Liu, Yinghua (2021) A unified direct method for ratchet and fatigue analysis of structures subjected to arbitrary cyclic thermal-mechanical load histories. International Journal of Mechanical Sciences, 194. 106190. ISSN 0020-7403

Zhu, Xuanchen and Xie, Yu and Chen, Haofeng and Luan, Weiling (2021) Numerical analysis of the cyclic mechanical damage of Li-ion battery electrode and experimental validation. International Journal of Fatigue, 142. 105915. ISSN 0142-1123

Zheng, Xiaotao and Wang, Jiqiang and Chen, Haofeng (2020) Burst pressures of high-density polyethylene pipes considering the notch effect : testing and prediction. Journal of Testing and Evaluation, 48 (6). ISSN 1945-7553

Wang, Wenjie and Yang, Jie and Chen, Haofeng and Yang, Qianyu (2020) Capturing and micromechanical analysis of the crack-branching behavior in welded joints. Metals, 10 (10). 1308. ISSN 2075-4701

Peng, Heng and Liu, Yinghua and Chen, Haofeng (2020) Numerical schemes based on the stress compensation method framework for creep rupture assessment. European Journal of Mechanics - A/Solids, 83. 104014. ISSN 0997-7538

Zhu, Xuanchen and Chen, Ying and Chen, Haofeng and Luan, Weiling (2020) The diffusion induced stress and cracking behaviour of primary particle for Li-ion battery electrode. International Journal of Mechanical Sciences, 178. 105608. ISSN 0020-7403

Yang, Jie and Liu, Yuman and Chen, Haofeng (2020) A study on the matching of constraint between steam turbine blade and laboratory specimens. Advances in Mechanical Engineering, 12 (5). pp. 1-11. ISSN 1687-8140

Barbera, Daniele and Chen, Haofeng (2020) On the plastic strain accumulation in notched bars during high-temperature creep dwell. Journal of Mechanics, 36 (2). pp. 167-176. ISSN 1727-7191

Dai, Yue and Yang, Jie and Chen, Haofeng (2020) Effect range of the material constraint in different strength mismatched laboratory specimens. Applied Sciences, 10 (7). 2434. ISSN 2076-3417

Ma, Zhiyuan and Chen, Haofeng and Liu, Yinghua and Xuan, Fu-Zhen (2020) A direct approach to the evaluation of structural shakedown limit considering limited kinematic hardening and non-isothermal effect. European Journal of Mechanics - A/Solids, 79. 103877. ISSN 0997-7538

Dai, Yanwei and Liu, Yinghua and Qin, Fei and Chao, Yuh J. and Chen, Haofeng (2020) Constraint modified time dependent failure assessment diagram (TDFAD) based on C(t)-A2(t) theory for creep crack. International Journal of Mechanical Sciences, 165. 105193. ISSN 0020-7403

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng (2019) Numerical investigations on the effects of T-stress in mode I creep crack. International Journal of Computational Methods, 16 (8). 1841002. ISSN 1793-6969

Chen, Xiaohui and Chen, Haofeng and Zhao, Li (2019) Ratcheting behavior of pressurized corroded straight pipe subjected to cyclic bending. Thin-Walled Structures, 145. pp. 1-16. 106410. ISSN 0263-8231

Chen, Xiaohui and Fang, Shuang and Chen, Haofeng (2019) Stress concentration factor and fatigue analysis of a lateral nozzle with local wall thinning. Engineering Failure Analysis, 105. pp. 289-304. ISSN 1350-6307

Cho, Nak-Kyun and Wang, Run-Zi and Ma, Zhiyuan and Chen, Haofeng and Xuan, Fu-Zhen (2019) Creep-fatigue endurance of a superheater tube plate under non-isothermal loading and multi-dwell condition. International Journal of Mechanical Science, 161-162. 105048. ISSN 0020-7403

Wang, Run-Zi and Guo, Su-Juan and Chen, Haofeng and Wen, Jian-Feng and Zhang, Xian-Cheng and Tu, Shan-Tung (2019) Multi-axial creep-fatigue life prediction considering history-dependent damage evolution : a new numerical procedure and experimental validation. Journal of the Mechanics and Physics of Solids, 131. pp. 313-336. ISSN 0022-5096

Chen, Xiaohui and Chen, Haofeng and Chen, Xu (2019) 基于线性匹配方法的核电站弯管在循环载荷下的安定性分析. China Mechanical Engineering, 30 (19). pp. 2269-2275. ISSN 1004-132X

Zheng, Xiaotao and Wei, Fen and Chen, Haofeng and Guo, Sujuan and Xuan, Fuzhen (2019) Measurement of small rotation angle of flange joints by a novel flexure magnifying mechanism. Measurement, 145. pp. 244-253. ISSN 1873-412X

Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) Microstructural damage mechanics-based model for creep fracture of 9%Cr steel under prior fatigue loading. Theoretical and Applied Fracture Mechanics, 103. 102269. ISSN 0167-8442

Gong, Jian-Guo and Cheng, Gong and Xuan, Fu-Zhen and Chen, Haofeng (2019) Notch effect on structural strength of components at elevated temperature under creep, fatigue and creep-fatigue loading conditions : phenomenon and mechanism. Journal of Pressure Vessel Technology, 141 (5). 050801. ISSN 0094-9930

Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) A modified constitutive model for tensile deformation of 9%Cr steel under prior fatigue loading. Mechanics of Materials, 136. 103093. ISSN 0167-6636

Zhang, Wei and Wang, Xiaowei and Chen, Haofeng and Zhang, Tianyu and Gong, Jianming (2019) Evaluation of the effect of various prior creep-fatigue interaction damages on subsequent tensile and creep properties of 9%Cr steel. International Journal of Fatigue, 125. pp. 440-453. ISSN 0142-1123

Zhu, Xuanchen and Chen, Haofeng and Xuan, Fuzhen and Chen, Xiaohui (2019) On the creep fatigue and creep rupture behaviours of 9-12% Cr steam turbine rotor. European Journal of Mechanics - A/Solids, 76. pp. 263-278. ISSN 0997-7538

Giugliano, Dario and Cho, Nak-Kyun and Chen, Haofeng and Gentile, Lorenzo (2019) Cyclic plasticity and creep-cyclic plasticity behaviours of the SiC/Ti-6242 particulate reinforced titanium matrix composites under thermo-mechanical loadings. Composite Structures, 218. pp. 204-216. ISSN 0263-8223

Peng, Heng and Shen, Jun and Liu, Yinghua and Chen, Haofeng (2019) Shakedown analysis of a torispherical head with a piping nozzle under combined loads by the stress compensation method. International Journal of Pressure Vessels and Piping, 172. pp. 107-118. ISSN 0308-0161

CHO, Nak-Kyun and Chen, Haofeng and MacKenzie, Donald and Giugliano, Dario (2019) Investigating the effects of cyclic thermo-mechanical loading on cyclic plastic behaviour of a ninety-degree back-to-back pipe bend system. Journal of Pressure Vessel Technology. ISSN 0094-9930

Peng, Heng and Liu, Yinghua and Chen, Haofeng (2019) Shakedown analysis of elastic-plastic structures considering the effect of temperature on yield strength : theory, method and applications. European Journal of Mechanics - A/Solids, 73. pp. 318-330. ISSN 0997-7538

Zheng, Xiaotao and Chen, Haofeng and Ma, Zhiyuan and Xuan, Fuzhen (2019) A novel fatigue assessment approach by Direct Steady Cycle Analysis (DSCA) considering the temperature-dependent strain hardening effect. International Journal of Pressure Vessels and Piping, 170. pp. 66-72. ISSN 0308-0161

Guo, Su-Juan and Wang, Run-Zi and Chen, Haofeng and Xuan, Fu-Zhen (2019) A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint. International Journal of Mechanical Science, 150. pp. 66-78. ISSN 0020-7403

Peng, Heng and Liu, Yinghua and Chen, Haofeng (2019) A numerical formulation and algorithm for limit and shakedown analysis of large-scale elastoplastic structures. Computational Mechanics, 63 (1). pp. 1-22. ISSN 0178-7675

Puliyaneth, Manu and Barbera, Daniele and Chen, Haofeng and Xuan, Fuzhen (2018) Study of ratchet limit and cyclic response of welded pipe. International Journal of Pressure Vessels and Piping, 168. pp. 49-58. ISSN 0308-0161

Zheng, X.T. and Dai, W.C. and Chen, H.F. and Shen, J. (2018) Ratcheting effect of reinforced graphite sheet with stainless steel insert (RGSWSSI) under cyclic compression at elevated temperature. Fatigue and Fracture of Engineering Materials and Structures, 41 (11). pp. 2391-2401. ISSN 8756-758X

Giugliano, Dario and Barbera, Daniele and Chen, Haofeng and Cho, Nak-Kyun and Liu, Yinghua (2018) Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538

Shen, Jun and Chen, Haofeng and Liu, Yinghua (2018) A new four-dimensional ratcheting boundary : derivation and numerical validation. European Journal of Mechanics - A/Solids, 71. pp. 101-112. ISSN 0997-7538

Peng, Heng and Liu, Yinghua and Chen, Haofeng and Shen, Jun (2018) Shakedown analysis of engineering structures under multiple variable mechanical and thermal loads using the stress compensation method. International Journal of Mechanical Sciences, 140. pp. 361-375. ISSN 0020-7403

Zheng, Xiaotao and Chen, Haofeng and Ma, Zhiyuan (2018) Shakedown boundaries of multilayered thermal barrier systems considering interface imperfections. International Journal of Mechanical Science. ISSN 0020-7403

CHO, Nak-Kyun and Chen, Haofeng and Boyle, James and Xuan, Fu-Zhen (2018) Enhanced fatigue damage under cyclic thermo-mechanical loading at high temperature by structural creep recovery mechanism. International Journal of Fatigue. ISSN 0142-1123

Gong, Jian-Guo and Niu, Tian-Ye and Chen, Haofeng and Xuan, Fu-Zhen (2018) Shakedown analysis of pressure pipeline with an oblique nozzle at elevated temperatures using the Linear Matching Method. International Journal of Pressure Vessels and Piping, 159. pp. 55-66. ISSN 0308-0161

Cho, Nak-Kyun and Chen, Haofeng (2018) Shakedown, ratchet, and limit analyses of 90° back-to-back pipe bends under cyclic in-plane opening bending and steady internal pressure. European Journal of Mechanics - A/Solids, 67. pp. 231-242. ISSN 0997-7538

Chen, Xiaohui and Chen, Xu and Chen, Haofeng (2018) Influence of stress level on uniaxial ratcheting effect and ratcheting strain rate in austenitic stainless steel Z2CND18.12N. Steel and Composite Structures, 27 (1). pp. 89-94. ISSN 1229-9367

Zhu, Xuanchen and Chen, Haofeng and Xuan, Fuzhen and Chen, Xiaohui (2017) Cyclic plasticity behaviors of steam turbine rotor subjected to cyclic thermal and mechanical loads. European Journal of Mechanics - A/Solids, 66. pp. 243-255. ISSN 0997-7538

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2017) Advances on creep-fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures, 40 (11). pp. 1854-1867. ISSN 8756-758X

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua and Xuan, Fuzhen (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139 (5). 051101. ISSN 0094-9930

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2017) A novel simulation for the design of a low cycle fatigue experimental testing programme. Computers and Structures, 178. 105–118. ISSN 0045-7949

Giugliano, Dario and Barbera, Daniele and Chen, Haofeng (2016) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids. EJMSOL_3346. ISSN 0997-7538

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-140. pp. 159-172. ISSN 0308-0161

Barbera, Daniele and Chen, Haofeng and Liu, Yinghua (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138 (4). 041403. ISSN 0094-9930

Giugliano, Dario and Chen, Haofeng (2016) Micromechanical modelling on cyclic plastic behaviour of unidirectional fiber reinforced aluminium matrix composites. European Journal of Mechanics - A/Solids. ISSN 0997-7538

Barbera, D. and Chen, H.F. and Liu, Y.H. (2015) On the creep fatigue behavior of Metal Matrix Composites. Procedia Engineering, 130. pp. 1121-1136. ISSN 1877-7058

Jackson, G.D. and Chen, H.F. and Tipping, D. (2015) Shakedown and creep rupture assessment of a header branch pipe using the Linear Matching Method. Procedia Engineering, 130. pp. 1705-1718. ISSN 1877-7058

Barbera, Daniele and Chen, Haofeng (2015) Creep rupture assessment by a robust creep data interpolation using the linear matching method. European Journal of Mechanics - A/Solids, 54. pp. 267-279. ISSN 0997-7538

Lytwyn, M. and Chen, H. F. and Ponter, A. R. S. (2015) A generalised method for ratchet analysis of structures undergoing arbitrary thermo-mechanical load histories. International Journal for Numerical Methods in Engineering, 104 (2). pp. 104-124. ISSN 0029-5981

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2015) On the modified monotonic loading concept for the calculation of the cyclic j-integral. Journal of Pressure Vessel Technology, 137 (5). 051406. ISSN 0094-9930

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng and Liu, Donghuan (2015) The interacting effect for collinear cracks near mismatching bimaterial interface under elastic creep. Journal of Pressure Vessel Technology. ISSN 0094-9930 (In Press)

Ure, James and Chen, Haofeng and Tipping, David (2015) Verification of the linear matching method for limit and shakedown analysis by comparison with experiments. Journal of Pressure Vessel Technology, 137 (3). 031003. ISSN 0094-9930

Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2015) Comparison of the linear matching method to Rolls Royce's hierarchical finite element framework for ratchet limit analysis. International Journal of Pressure Vessels and Piping, 125. pp. 13-22. ISSN 0308-0161

Chen, Haofeng and Chen, Weihang and Ure, James (2014) A direct method on the evaluation of cyclic steady state of structures with creep effect. Journal of Pressure Vessel Technology, 136 (6). 161404. ISSN 0094-9930

Ure, James and Chen, Haofeng and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 1 : Software development. International Journal of Pressure Vessels and Piping, 120-121. pp. 141-151. ISSN 0308-0161

Chen, Haofeng and Ure, James and Tipping, David (2014) Integrated structural analysis tool using linear matching method part 2 : Application and verification. International Journal of Pressure Vessels and Piping, 120-121. pp. 152-161. ISSN 0308-0161

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2014) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. Journal of Pressure Vessel Technology, 136 (1). 011205. ISSN 0094-9930

Bradford, R.A.W. and Ure, James and Chen, Haofeng (2014) The Bree problem with different yield stresses on-load and off-load and application to creep ratcheting. International Journal of Pressure Vessels and Piping, 113. ISSN 0308-0161

Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue endurance of welded joints. Proceedings in Applied Mathematics and Mechanics, PAMM, 13 (1). pp. 73-74. ISSN 1617-7061

Gorash, Yevgen and Chen, Haofeng (2013) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). Materials Research Innovations, 17 (5). pp. 337-343.

Gorash, Yevgen and Chen, Haofeng (2013) A parametric study on creep-fatigue strength of welded joints using the linear matching method. International Journal of Fatigue, 55. pp. 112-125. ISSN 0142-1123

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A fully implicit, lower bound, multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. Journal of Pressure Vessel Technology, 135 (5). 051202. ISSN 0094-9930

Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Chen, Haofeng and Ure, James Michael and Tipping, David (2013) Calculation of a lower bound ratchet limit part 1 – Theory, numerical implementation and verification. European Journal of Mechanics - A/Solids, 37. pp. 361-368. ISSN 0997-7538

Ure, James Michael and Chen, Haofeng and Tipping, David (2013) Calculation of a lower bound ratchet limit part 2 : Application to a pipe intersection and dissimilar material join. European Journal of Mechanics - A/Solids, 37. pp. 369-378. ISSN 0997-7538

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2012) On shakedown, ratchet and limit analysis of defective pipeline. Journal of Pressure Vessel Technology, 134 (1). 011202. ISSN 0094-9930

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) On the ratchet analysis of a cracked welded pipe. Journal of Pressure Vessel Technology, 134 (1). 011203. ISSN 0094-9930

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James (2011) On the shakedown analysis of welded pipes. International Journal of Pressure Vessels and Piping, 88 (8-9). pp. 301-310. ISSN 0308-0161

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Effect of circular holes on the ratchet limit and crack tip plastic strain range in a centre cracked plate. Engineering Fracture Mechanics, 78 (11). pp. 2310-2324. ISSN 0013-7944

Chen, Haofeng and Ure, James Michael and Li, Tianbai and Chen, Weihang and Mackenzie, Donald (2011) Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 213-222. ISSN 0308-0161

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2011) Shakedown analysis of a composite cylinder with a cross-hole. Journal of Pressure Vessel Technology, 133 (3). 031206. ISSN 0094-9930

Chen, Haofeng (2010) Linear matching method for design limits in plasticity. Computers, Materials and Continua - Tech Science Press, 20 (2). pp. 159-183. ISSN 1546-2218

Chen, H.F. and Ponter, Alan R.S. (2010) A direct method on the evaluation of ratchet limit. Journal of Pressure Vessel Technology, 132 (4). 041202. ISSN 0094-9930

Chen, Haofeng (2010) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. Journal of Pressure Vessel Technology, 132 (1). 011202. ISSN 0094-9930

Chen, Haofeng and Ponter, Alan R.S. (2009) Structural integrity assessment of superheater outlet penetration tubeplate. International Journal of Pressure Vessels and Piping, 86 (7). pp. 412-419. ISSN 0308-0161

Ponter, Alan R.S. and Chen, Haofeng (2007) Modelling of the behaviour of a welded joint subjected to reverse bending moment at high temperature. Journal of Pressure Vessel Technology, 129 (2). pp. 254-261. ISSN 0094-9930

Chen, H. F. and Ponter, Alan R.S. and Specchia, G. and Ciavarella, M. (2006) Shakedown analysis for rolling and sliding contact problems. International Journal of Solids and Structures, 43 (14-15). pp. 4201-4219. ISSN 0020-7683

Chen, Haofeng and Ponter, Alan R.S. (2006) Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading. International Journal for Numerical Methods in Engineering, 68 (1). pp. 13-32. ISSN 0029-5981

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 123-135. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. and Ainsworth, R.A. (2006) The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields. International Journal of Pressure Vessels and Piping, 83. pp. 136-147. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) On the behaviour of a particulate metal matrix composite subjected to cyclic temperature and constant stress. Computational Materials Science, 34 (4). pp. 425-441. ISSN 0927-0256

Ponter, Alan R.S. and Chen, Haofeng (2005) Direct methods for limits in plasticity. Archives of Mechanics, 57 (2-3). p. 171.

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. shakedown, reverse plasticity and ratchetting. International Journal of Pressure Vessels and Piping, 82 (2). pp. 85-94. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: creep relaxation and reverse plasticity. International Journal of Pressure Vessels and Piping, 82 (2). pp. 95-104. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2005) The linear matching method for shakedown and limit analyses applied to rolling and sliding point contact problems. Road Materials and Pavement Design, 6. pp. 9-30.

Chen, Haofeng and Ponter, Alan R.S. (2004) A simplified creep-reverse plasticity solution method for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 23 (4). pp. 561-577. ISSN 0997-7538

Ponter, Alan R.S. and Chen, Haofeng and Willis, M. and Evans, J. (2004) Fatigue-creep and plastic collapse of notched bars. Fatigue and Fracture of Engineering Materials and Structures, 27. pp. 305-318. ISSN 8756-758X

Chen, Haofeng and Ponter, Alan R.S. (2004) Integrity assessment for a tubeplate using linear matching method. International Journal of Pressure Vessels and Piping, 81. pp. 327-336. ISSN 0308-0161

Chen, Haofeng and Engelhardt, M.J. and Ponter, Alan R.S. (2003) Linear matching method for creep rupture assessment. International Journal of Pressure Vessels and Piping, 80. pp. 213-220. ISSN 0308-0161

Chen, Haofeng and Ponter, Alan R.S. (2001) Shakedown and limit analyses for 3-D structures using the linear matching method. International Journal of Pressure Vessels and Piping, 78. pp. 443-451. ISSN 0308-0161

Chen, Haofeng and Shu, D.W. (2001) Simplified limit analysis of pipelines with multi-defects. Engineering Structures, 23 (2). pp. 207-213. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (2001) The load carrying capacity of the pressure vessel with two defects along axial direction. Key Engineering Materials, 177-180. pp. 757-762. ISSN 1013-9826

Chen, Haofeng and Ponter, Alan R.S. (2001) A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading. European Journal of Mechanics - A/Solids, 20 (4). pp. 555-571. ISSN 0997-7538

Chen, Haofeng and Ponter, Alan R.S. (2001) A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit. European Journal of Mechanics - A/Solids, 20 (4). pp. 539-553. ISSN 0997-7538

Chen, Haofeng and Shu, D.W. (2000) Lower and upper bound limit analyses for pipeline with multi-slots of various configurations. International Journal of Pressure Vessels and Piping, 77 (1). pp. 17-25. ISSN 0308-0161

Liu, Y.H. and Cen, Z.Z. and Chen, Haofeng and Xu, B.Y. (2000) Plastic collapse analysis of defective pipelines under multi-loading systems. International Journal of Mechanical Sciences, 42 (8). pp. 1607-1622. ISSN 0020-7403

Chen, Haofeng and Shu, D.W. (2000) The effects of the distance between two defects on the load carrying capacity of pressure vessel. Journal of Pressure Vessel Technology, 122 (2). pp. 198-203. ISSN 0094-9930

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1999) On the solution of limit load and reference stress of 3-D structures under multi-loading systems. Engineering Structures, 21 (6). pp. 530-537. ISSN 0141-0296

Chen, Haofeng and Shu, D.W. (1999) A numerical method for lower bound limit analysis of 3-D structures with multi-loading systems. International Journal of Pressure Vessels and Piping, 76 (2). pp. 105-112. ISSN 0308-0161

Cen, Z.Z. and Chen, Haofeng and Liu, Y.H. and Xu, B.Y. (1998) Collapse load computation of defective pipelines under multi-loading system. Metals and Materials International, 4 (3). pp. 306-310.

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) Numerical analysis of limit load and reference stress of defective pipelines under multi-loading system. International Journal of Pressure Vessels and Piping, 75 (2). pp. 105-114. ISSN 0308-0161

Chen, Haofeng and Liu, Y.H. and Cen, Z.Z. and Xu, B.Y. (1998) A numerical method for limit analysis of structures under multi-loading systems. Journal of Tsinghua University and Peking University : Science and Technology., 8. 28－35.

Chen, Haofeng and Cen, Z.Z. and Xu, B.Y. and Zhan, S.G. (1997) A numerical method for reference stress in the evaluation of structure integrity. International Journal of Pressure Vessels and Piping, 71 (1). pp. 47-53. ISSN 0308-0161

Chen, Haofeng and Song, J. (1996) The influence of strain-rate on the residual stress fields of thick-walled cylinder. Engineering Mechanics, 13. pp. 125-131. ISSN 1802-1484

Book Section

Puliyaneth, Manu and Chen, Haofeng and Luan, Weiling; (2019) Cyclic plasticity analysis of welded joint with welding residual stress using the direct method. In: ASME 2019 Pressure Vessels & Piping Conference. ASME, USA. ISBN 9780791858974

Ma, Zhiyuan and Wang, Xiaoxiao and Chen, Haofeng and Xuan, Fuzhen; (2019) Creep fatigue life assessment of hydrogenation reactor manufactured of 2.25Cr-1Mo steel using the linear matching method framework. In: ESIA15 & ISSI-2019 Joint Conference on Engineering Structural Integrity Assessment. FESI publishing, Preston, UK.

Cho, Nak-Kyun and Chen, Haofeng; (2018) Cyclic plasticity behavior of 90° back-to-back pipe bends under cyclic bending and steady pressure. In: 2018 26th International Conference on Nuclear Engineering. ASME, GBR. ISBN 978-0-7918-5153-1

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng; (2016) Influences of T-stress on constraint effect in mismatched modified boundary layer model for creep crack. In: ASME 2016 Pressure Vessels and Piping Conference. ASME, CAN. ISBN 9780791850398

Gorash, Yevgen and Chen, Haofeng; (2013) Linear matching method for parametric studies of weldments creep-fatigue endurance. In: ASME 2013 Pressure Vessels and Piping Conference. ASME, FRA. ISBN 978-0-7918-5570-6

Ponter, Alan R.S. and Chen, Haofeng; Drew, H.R. and Pellegrino, S., eds. (2002) Linear matching methods for shakedown analysis. In: New Approaches to Structural Mechanics, Shells and Biological Structures. Solid Mechanics and Its Applications, 104 . Kluwer Academic Publishers, pp. 203-213.

Conference or Workshop Item

Cho, Nak-Kyun and Chen, Haofeng (2017) Investigation of structural creep strain recovery and its impact on structural integrity. In: 24th International Conference on Structural Mechanics in Reactor Technology, 2017-08-20 - 2017-08-25, BEXCO/Centum Hotel.

Beesley, Ross and Chen, Haofeng and Hughes, Martin (2014) On the cyclic J-integral of a 3D semi elliptical surface crack. In: ASME Pressure Vessels and Piping Conference 2014, 2014-07-20 - 2014-07-24, California.

Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2014) Ratchet analysis of structures under a generalised cyclic load history. In: ASME Pressure Vessels and Piping Conference 2014, 2014-07-20 - 2014-07-24, California.

Ure, James and Chen, Haofeng and Tipping, David (2013) Verification of the linear matching method for limit and shakedown analysis by comparison with experiments. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2013) A new constitutively accurate lower bound direct shakedown method. In: 2013 ASME Pressure Vessel and Piping Conference, 2013-07-14 - 2013-07-19.

Chen, Haofeng and Gorash, Yevgen (2013) Novel direct method on the life prediction of component under high temperature-creep fatigue conditions. In: 13th International Conference on Fracture, 2013-06-16 - 2013-06-21, The China National Convention Center (CNCC).

Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27.

Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07. (Unpublished)

Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) Linear matching method on the evaluation of cyclic behaviour with creep effect. In: ASME Pressure Vessels and Piping Conference 2012, 2012-07-15 - 2012-07-20.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Jappy, Alan and Mackenzie, Donald and Chen, Haofeng (2012) A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development. In: 2012 ASME Pressure Vessel and Piping Conference, 2012-07-15 - 2012-07-20.

Chen, Weihang and Chen, Haofeng (2012) Cyclic J integral using linear matching method. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.

Lytwyn, Michael and Chen, Haofeng and Martin, Michael (2012) Linear matching method for ratchet limit prediction in comparison to Rolls Royce's Hierarchical Finite Element Framework. In: 13th International Conference on Pressure Vessel Technology, 2012-05-20 - 2012-05-23.

Ure, James Michael and Chen, Haofeng and Tipping, David (2012) Development and implementation of the Abaqus subroutines and plug-in for routine structural integrity assessment using the linear matching method. In: SIMULIA Community Conference 2012, (Formerly the ABAQUS Users Conference), 2012-05-14 - 2012-05-17.

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels & Piping Conference, PVP 2011, 2011-07-17 - 2011-07-21.

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21.

Ure, James Michael and Chen, Haofeng and Chen, Weihang and Li, Tianbai and Tipping, James and Mackenzie, Donald (2011) A direct method for the evaluation of lower and upper bound ratchet limits. In: 11th International Conference on Mechanical Behaviour of Materials, 2011-06-05 - 2011-06-09.

Chen, Haofeng and Chen, Weihang and Li, Tianbai and Ure, James Michael (2010) Shakedown behaviour of composite cylinders with cross holes. In: Proceedings of the ASME Pressure Vessels and Piping Conference 2010, 2010-07-18 - 2010-07-22.

Chen, Haofeng (2009) Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30.