Picture of patient recieving biomechanical prosthetic upper limb

Open Access research transforming patient rehabilitation...

Strathprints makes available scholarly Open Access content by researchers within the Department of Biomedical Engineering, including those working within the areas of rehabilitation engineering, which encompasses biomechanics, prosthetics and orthotics, and motor control and neuroprosthetics.

Research at Biomedical Engineering also explores cell, tissue and organ engineering, particularly in the development of artificial organs, as well as research into implanted medical devices such as intelligent sensors.

Explore the Open Access research by Biomedical Engineering, or explore all of Strathclyde's Open Access research...

Browse by Author or creator

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Number of items: 18.

Article

Prasad, Elke and Robertson, John and Halbert, Gavin (2020) Improving consistency for a Mefenamic acid immediate release formulation. Journal of Pharmaceutical Sciences. ISSN 0022-3549 (In Press)

Bordos, Ecaterina and Islam, Muhammad T. and Florence, Alastair J. and Halbert, Gavin W and Robertson, John (2019) Use of Terahertz-Raman spectroscopy to determine solubility of crystalline API in polymeric matrices during hot melt extrusion. Molecular Pharmaceutics, 16 (10). pp. 4361-4371. ISSN 1543-8384

Bordos, Ecaterina and Islam, Muhammad T. and Florence, Alastair J. and Halbert, Gavin W. and Robertson, John (2019) Use of terahertz-Raman spectroscopy to determine solubility of the crystalline active pharmaceutical ingredient in polymeric matrices during hot melt extrusion. Molecular Pharmaceutics, 16 (10). pp. 4361-4371. ISSN 1543-8384

Prasad, Elke and Islam, Muhammad T. and Goodwin, Daniel J. and Megarry, Andrew J. and Halbert, Gavin W. and Florence, Alastair J. and Robertson, John (2019) Development of a hot-melt extrusion (HME) process to produce drug loaded Affinisol™ 15LV filaments for Fused Filament Fabrication (FFF) 3D printing. Additive Manufacturing, 29. 100776. ISSN 2214-8604

Tahir, Furqan and Islam, Muhammad T. and Mack, John and Robertson, John and Lovett, David (2019) Process monitoring and fault detection on a hot-melt extrusion process using in-line Raman spectroscopy and a hybrid soft sensor. Computers and Chemical Engineering, 125. pp. 400-414. ISSN 0098-1354

Torrecillas, Carlota Mendez and Gorringe, Lee J. and Rajoub, Nazer and Robertson, John and Elkes, Richard G. and Lamprou, Dimitrios A. and Halbert, Gavin W. (2018) The impact of channel fill level on internal forces during continuous twin screw wet granulation. International Journal of Pharmaceutics. pp. 1-43. ISSN 0378-5173

McLaughlin, Arabella and Robertson, John and Ni, Xiong-Wei (2018) Material characterisation and parameter effects on bulk solid dissolution rate of paracetamol in a stirred tank vessel using an in situ UV-ATR probe. International Journal of Engineering Research and Science, 4 (1). pp. 10-20. ISSN 2395-6992

Halliwell, Rebecca A. and Bhardwaj, Rajni M. and Brown, Cameron and Briggs, Naomi E. B. and Dunn, Jaclyn and Robertson, John and Nordon, Alison and Florence, Alastair J. (2017) Spray drying as a reliable route to produce metastable carbamazepine form IV. Journal of Pharmaceutical Sciences, 106 (7). pp. 1874-1880. ISSN 0022-3549

Sullivan, F. M. and Farmer, Eoghan and Mair, Frances S. and Treweek, Shaun and Kendrick, Denise and Jackson, Cathy and Robertson, Chris and Briggs, Andrew and McCowan, Colin and Bedford, Laura and Young, Ben and Vedhara, Kavita and Gallant, Stephanie and Littleford, Roberta and Robertson, John and Sewell, Herb and Dorward, Alistair and Sarvesvaran, Joseph and Schembri, Stuart (2017) Detection in blood of autoantibodies to tumour antigens as a case-finding method in lung cancer using the EarlyCDT®-Lung Test (ECLS) : study protocol for a randomized controlled trial. BMC Cancer, 17. ISSN 1471-2407

Book Section

Jolliffe, Hikaru G. and Papathanasiou, Foteini and Prasad, Elke and Halbert, Gavin and Robertson, John and Brown, Cameron J. and Florence, Alastair J.; (2019) Improving the prediction of multi-component tablet properties from pure component parameters. In: 29th European Symposium on Computer Aided Chemical Engineering. Computer Aided Chemical Engineering, 46 . Elsevier, NLD, pp. 883-888. ISBN 9780128186350

Conference or Workshop Item

Prasad, Elke and Robertson, John and Halbert, Gavin W. (2020) Improving consistency for a Mefenamic acid immediate release formulation. In: CMAC Annual Open Day, 2020-10-21 - 2020-10-22, Virtual event.

Prasad, E. and Robertson, J. and Halbert, G. (2019) Enabling future manufacture of dose forms: screening tools for an HME-3D printing process. In: CMAC UK Showcase, 2019-10-23 - 2019-10-23, CMAC Future Manufacturing Research Hub, Strathclyde Institute of Pharmacy and Biomedical Sciences.

Prasad, E. and Robertson, J. and Halbert, G. (2019) HUB Microfactory – PPA1 – Mefenamic acid – HME – 3D printing process stream. In: CMAC DTC Summer school, 2019-06-12 - 2019-06-14, Hampden Park.

Prasad, E. and Robertson, J. and Brown, C. and Jolliffe, H. and Florence, A. and Halbert, G. (2018) Microfactory – Blend – Compression - Performance test. In: CMAC Annual Open Day, 2018-10-25 - 2018-10-26.

Prasad, Elke and Islam, Muhammad and Robertson, John and Halbert, Gavin (2017) Example use of screening and analytical tools for secondary processing. In: CMAC Tier1 Showcase, 2017-11-09 - 2017-11-09, University of Strathclyde, SIPBS, CMAC.

Rajniak, Pavol and Fuentes-Gari, Maria and Mitchell, Niall and Islam, Muhammad Tariqul and Robertson, John and Bermingham, Sean K (2016) Modelling of co-rotating twin-screw extruders in the pharmaceutical industry I : single component model. In: 2016 AIChE Annual Meeting, 2016-11-13 - 2016-11-18, San Francisco.

Islam, M. T. and Robertson, J. and Tahir, F. and Florence, A. (2016) Investigating processing window of Affinisol™ and Plasdone™ - S630 polymers during hot-melt extrusion (for 3D printing by fused deposition modelling). In: 7th APS International PharmSci Conference, 2016-09-05 - 2016-09-07, University of Strathclyde.

Islam, M.T. and Robertson, J. and Florence, A.J. (2016) Initial assessment of hot-melt extrusion for processing API with a wide range of physical properties to form consistent solid dispersion : HPMC-Affinisol paracetamol system. In: 2016 AAPS Annual meeting and exposition, 2016-11-13 - 2016-11-17, Colorado Convention Center. (In Press)

This list was generated on Tue Dec 1 03:51:59 2020 GMT.