Browse by Journal or other publication

Sun, Yekai and Yuan, Jie and Denimal, Enora and Salles, Loïc (2021) A study of the contact interface for compressor blisks with ring dampers using nonlinear modal analysis. IOP Conference Series: Materials Science and Engineering, 1081. 012041. ISSN 1757-899X

Ogbeifun, A. M. and Oterkus, S. and Race, J. and Naik, H. and Moorthy, D. and Bhowmik, S. and Ingram, J. (2021) A tabular optimisation technique for steel lazy wave riser. IOP Conference Series: Materials Science and Engineering, 1052 (1). 012022. ISSN 1757-899X

Yulianto, A N and Aryawan, W D and Putranto, T and Sujiatanti, S H and Ahadyanti, G M and Purwanto, D B (2021) Preliminary study of ship maneuvering prediction of container ship. IOP Conference Series: Materials Science and Engineering, 1052 (1). 012001. ISSN 1757-899X

Ogbeifun, A. M. and Oterkus, S. and Race, J. and Naik, H. and Moorthy, D. and Bhowmik, S. and Ingram, J. (2021) Impact of seabed slope on steel catenary riser touchdown zone response. IOP Conference Series: Materials Science and Engineering, 1052 (1). 012018. ISSN 1757-899X

Bozkurt, Murat and Nash, David and Uzzaman, Asraf (2020) Effect of the internal pressure and external loads on nozzles in cylindrical vessel. IOP Conference Series: Materials Science and Engineering, 938 (1). 012007. ISSN 1757-899X

Thomason, J L and Yang, L and Pender, K (2020) Upgrading and reuse of glass fibre recycled from end-of-life composites. IOP Conference Series: Materials Science and Engineering, 942. 012002. ISSN 1757-899X

Jenkins, Peter G and Bryce, David and Xypolias, Georgios and Thomason, James L (2020) Micro-mechanical investigation of glass fibre/resin interface failure in mode I and mode II. IOP Conference Series: Materials Science and Engineering, 942. 012028. ISSN 1757-899X

Xypolias, G and Thomason, J and Yang, L (2020) The effect of environmental ageing in the interphase of a glass fibre/vinyl ester composite designed for wind turbine applications. IOP Conference Series: Materials Science and Engineering, 942 (1). 012031. ISSN 1757-899X

Bryce, David and Thomason, James and Yang, Liu (2020) Micromechanical and spectroscopic characterisation of the curing performance of epoxy resins in the microbond test. IOP Conference Series: Materials Science and Engineering, 942 (1). 012019. ISSN 1757-899X

Trager-Cowan, C. and Alasmari, A. and Avis, W. and Bruckbauer, J. and Edwards, P. R. and Hourahine, B. and Kraeusel, S. and Kusch, G. and Jablon, B. M. and Johnston, R. and Martin, R. W. and McDermott, R. and Naresh-Kumar, G. and Nouf-Allehiani, M. and Pascal, E. and Thomson, D. and Vespucci, S. and Mingard, K. and Parbrook, P. J. and Smith, M. D. and Enslin, J. and Mehnke, F. and Kneissl, M. and Kuhn, C. and Wernicke, T. and Knauer, A. and Hagedorn, S. and Walde, S. and Weyers, M. and Coulon, P-M and Shields, P. A. and Zhang, Y. and Jiu, L. and Gong, Y. and Smith, R. M. and Wang, T. and Winkelmann, A. (2020) Advances in electron channelling contrast imaging and electron backscatter diffraction for imaging and analysis of structural defects in the scanning electron microscope. IOP Conference Series: Materials Science and Engineering, 891 (1). 012023. ISSN 1757-899X

Rosli, Roslynna and Norman, Rosemary and Atlar, Mehmet (2020) The influence of the pitch to diameter ratio (P/D) on a novel tidal turbine performance. IOP Conference Series: Materials Science and Engineering, 893. 12008. ISSN 1757-899X

Yakushina, E. and McArthur, M. and Canavan, M. (2019) Optimisation of laser assisted forming conditions for improved formability of aerospace materials. IOP Conference Series: Materials Science and Engineering, 672 (1). 012066. ISSN 1757-899X

O'Connor, D and Calautit, J K and Calautit, J K and Calautit, K and Hughes, B R and Pantua, C (2019) Analysis of a rotary passive heat recovery device for natural ventilation windcatcher. IOP Conference Series: Materials Science and Engineering, 556. pp. 1-8. 012001. ISSN 1757-899X

Zhang, Y J and Qian, X W and Zhou, J X and Yin, Y J and Shen, X and Ji, X. Y. and Huang, J L (2019) Simulation of casting filling process using the lattice Boltzmann method. IOP Conference Series: Materials Science and Engineering, 529 (1). 012061. ISSN 1757-899X

Bayliss, V. and Boehm, J. and Bradshaw, T. and Courthold, M. and Harrison, S. and Hills, M. and Hodgson, P. and Ishimoto, S. and Kurup, A. and Lau, W. and Long, K. and Macwaters, C. and Nichols, A. and Summers, D. and Tucker, M. and Warburton, P. and Watson, S. and Whyte, C. (2019) The liquid-hydrogen absorber for MICE. IOP Conference Series: Materials Science and Engineering, 502 (1). 012150. ISSN 1757-899X

Wolszczak, P. and Garcia, C. (2018) Assessment of the distribution of nanofibers in membranes based on microstructure photos. IOP Conference Series: Materials Science and Engineering, 416 (1). 012048. ISSN 1757-899X

Yerkinova, Azat and Balbayeva, Gaukhar and Inglezakis, Vassilis J. and Poulopoulos, Stavros G. (2018) Photocatalytic treatment of a synthetic wastewater. IOP Conference Series: Materials Science and Engineering, 301 (1). 012143. ISSN 1757-899X

Balbayeva, Gaukhar and Yerkinova, Azat and Inglezakis, Vassilis J. and Poulopoulos, Stavros G. (2018) Photochemical degradation of organic pollutants in wastewaters. IOP Conference Series: Materials Science and Engineering, 301 (1). 012099. ISSN 1757-899X

Nolan, S. and Jones, C.E. and Munro, R. and Norman, P. and Galloway, S. and Venuturumilli, S. and Sheng, J. and Yuan, W. (2017) Experimental investigation into the fault response of superconducting hybrid electric propulsion electrical power system to a DC rail to rail fault. IOP Conference Series: Materials Science and Engineering, 279 (1). 012014. ISSN 1757-899X

Tauanov, Z. and Abylgazina, L. and Spitas, C. and Itskos, G. and Inglezakis, V. (2017) Mineralogical, microstructural and thermal characterization of coal fly ash produced from Kazakhstani power plants. IOP Conference Series: Materials Science and Engineering, 230 (1). 012046. ISSN 1757-899X

Tauanov, Z. and Shah, D. and Itskos, G. and Inglezakis, V. (2017) Optimized production of coal fly ash derived synthetic zeolites for mercury removal from wastewater. IOP Conference Series: Materials Science and Engineering, 230 (1). 012044. ISSN 1757-899X

Qarni, Muhammad Jawad and Rosochowski, Andrzej and Boczkal, Sonia (2017) Warm deformation behaviour of UFG CP-Titanium produced by I-ECAP. IOP Conference Series: Materials Science and Engineering, 194. pp. 1-6. ISSN 1757-899X

Salamati, M and Tamimi, S and Moturu, Shanmukha Rao and Sivaswamy, G and Qarni, M and Rosochowski, A (2017) Microstructure and mechanical properties of Al-1050 during incremental ECAP. IOP Conference Series: Materials Science and Engineering, 194. 012009. ISSN 1757-899X

Infield, D and Zorzi, G (2017) Stability impact on wake development in moderately complex terrain. IOP Conference Series: Materials Science and Engineering. ISSN 1757-899X (In Press)

Campbell, A. and Murray, P. and Yakushina, E. and Marshall, S. and Ion, W. (2017) Automated microstructural analysis of titanium alloys using digital image processing. IOP Conference Series: Materials Science and Engineering, 179 (1). 012011. ISSN 1757-899X

Pickering, S. J. and Liu, Z. and Turner, T. A. and Wong, K. H. (2016) Applications for carbon fibre recovered from composites. IOP Conference Series: Materials Science and Engineering, 139 (1). 012005. ISSN 1757-899X

Thomason, J L and Yang, L and Bryce, D and Minty, R (2016) An exploration of the relationship of chemical and physical parameters in the micromechanical characterisation of the apparent interfacial strength in glass fibre epoxy systems. IOP Conference Series: Materials Science and Engineering, 139. pp. 1-8. ISSN 1757-899X (In Press)

Rosochowski, Andrzej and Olejnik, Lech (2014) Incremental ECAP of thick continuous plates - machine and initial trials. IOP Conference Series: Materials Science and Engineering, 63 (1). 012010. ISSN 1757-899X

Olejnik, Lech and Chrominski, Witold and Rosochowski, Andrzej and Lipinska, Marta and Lewandowska, Malgorzata (2014) Incremental ECAP as a novel tool for producing ultrafine grained aluminium plates. IOP Conference Series: Materials Science and Engineering, 63 (1). 012004. ISSN 1757-899X

Bylya, Olga and Sarangi, M K and Ovchinnikova, N V and Vasin, R A and Yakushina, E B and Blackwell, P L (2014) FEM Simulation of microstructure refinement during severe deformation. IOP Conference Series: Materials Science and Engineering, 63. 012033. ISSN 1757-899X

Baldwin, J.S. and Allen, P.M. and Ridgway, K. (2011) An evolutionary complex systems decision-support tool for the management of operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Geng, Zunmin and Ridgway, Keith and Turner, Sam and Morgan, Gareth (2011) Application of thin-walled dynamics for advanced manufacturing solutions. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Yao, S.M. and Teo, Wee Kin and Geng, Zunmin and Turner, Sam and Ridgway, Keith (2011) Bingham sealing and application in vacuum clamping. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Baufeld, Bernd and Van Der Biest, Omer and Gault, Rosemary and Ridgway, Keith (2011) Manufacturing Ti-6Al-4V components by shaped metal deposition : microstructure and mechanical properties. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Escobar-Palafox, Gustavo and Gault, Rosemary and Ridgway, Keith (2011) Preliminary empirical models for predicting shrinkage, part geometry and metallurgical aspects of Ti-6Al-4V shaped metal deposition builds. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X

Zorcolo, Alberto and Escobar-Palafox, Gustavo and Gault, Rosemary and Scott, Robin and Ridgway, Keith (2011) Study of lighting solutions in machine vision applications for automated assembly operations. IOP Conference Series: Materials Science and Engineering, 26 (1). ISSN 1757-899X