Browse by Author or creator

Benghalia, G. and Rahimi, S. and Wood, J. and Coules, H. and Paddea, S. (2018) Multiscale measurements of residual stress in a low alloy carbon steel weld clad with IN625 superalloy. Materials Performance and Characterization, 7 (4). pp. 606-629. ISSN 2165-3992

Benghalia, Gladys and Rahimi, Salah and Wood, James; Holden, Thomas M. and Muránsky, Ondrej and Edwards, Lyndon, eds. (2016) Measurements of surface and near-surface residual stress in 4330 low alloy carbon steel weld clad components. In: Residual Stresses 2016. Materials Research Forum, AUS, pp. 259-264. ISBN 978-1-94529116-6

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C. (2016) Residual stress generations in brazed tungsten dissimilar joints. IEEE Transactions on Plasma Science, 44 (9). pp. 1-6. ISSN 1939-9375

Easton, D. and Wood, J. and Rahimi, S. and Galloway, A. and Zhang, Y. and Hardie, C.; (2016) Residual stress generation in tungsten-copper brazed joint using brazing alloy. In: Fusion Engineering (SOFE), 2015 IEEE 26th Symposium on. IEEE, USA. ISBN 9781479982646

Benghalia, G. and Wood, J. (2016) Material and residual stress considerations associated with the autofrettage of weld clad components. International Journal of Pressure Vessels and Piping, 139-140. pp. 146-158. ISSN 0308-0161

Benghalia, G. and Wood, J. (2015) Autofrettage of weld clad components. Procedia Engineering, 130 (2015). pp. 453-465. ISSN 1877-7058

Easton, David and Zhang, Yuxuan and Wood, James and Galloway, Alexander and Robbie, Mikael Olsson and Hardie, Christopher (2015) Brazing development and interfacial metallurgy study of tungsten and copper joints with eutectic gold copper brazing alloy. Fusion Engineering and Design, 98-99. pp. 1956-1959. ISSN 0920-3796

Wood, James and Olsson Robbie, Mikael and Hamilton, Niall Robert and Easton, David and Zhang, Yuxuan (2015) Theoretical elastic stress singularities... much maligned and misunderstood. In: NAFEMS World Congress 2015, 2015-06-21 - 2015-06-24, California.

Hamilton, Niall Robert and Wood, James and Easton, David and Olsson Robbie, Mikael and Zhang, Yuxuan and Galloway, Alexander (2015) Thermal autofrettage of dissimilar material brazed joints. Materials and Design, 67. pp. 405-412. ISSN 0261-3069

Zhang, Yuxuan and Galloway, Alexander and Wood, James and Olsson Robbie, Mikael and Easton, David and Zhu, Wenzhong (2014) Interfacial metallurgy study of brazed joints between tungsten and fusion related materials for divertor design. Journal of Nuclear Materials, 454 (1-3). pp. 207-216. ISSN 0022-3115

Schnier, Gladys and Wood, James and Galloway, Alexander (2014) Investigating the effects of process variables on the residual stresses of weld and laser cladding. Advanced Materials Research, 996. pp. 481-487. ISSN 1022-6680

Schnier, Gladys and Wood, James and Galloway, Alexander; (2013) An experimental validation of residual stresses in weld clad pipelines. In: Research and Applications in Structural Engineering, Mechanics & Computation. Taylor and Francis, CRC Press, ZAF, pp. 613-617. ISBN 978-1-138-00061-2

Li, Hongjun and Wood, James and McCormack, Ross and Hamilton, Robert (2013) Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure. International Journal of Pressure Vessels and Piping, 101. pp. 154-160. ISSN 0308-0161

Wood, James and Prinja, Nawal and Morris, Tim (2013) Transferring simulation skills from other industries to nuclear. Nuclear Future, 9 (1). pp. 1-7. ISSN 1745-2058

Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Olsson Robbie, Mikael and Zhang, Yuxuan (2013) The metallurgy, mechanics, modelling and assessment of dissimilar material brazed joints. Journal of Nuclear Materials, 432 (1-3). pp. 42-51. ISSN 0022-3115

McPherson, Norman and Galloway, Alexander and Wood, James and Cater, Stephen R. (2012) A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08.

Hamilton, Niall Robert and Wood, James (2012) Observations on the modelling and assessment of dissimilar material brazed joints. In: NAFEMS UK Conference, 2012-05-30 - 2012-05-31.

Li, Hongjun and Wood, James and McCormack, Ross (2012) Shakedown behaviour of a 90 degree single mitred pipe bends under cyclic in-plane closing moments. In: International Conference on Pressure Vessel Technology (ICPVT13), 2012-05-20 - 2012-05-23.

Wood, James and Morris, Tim and Prinja, Nawal (2011) The development of a competence framework for engineering analysis and simulation. In: 21st International Conference on Structural Mechanics in Reactor Technology, 2011-11-06 - 2011-11-11.

Olsson Robbie, Mikael Brian and Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Milnes, Joe and Katramados, Ioannis (2011) Observations on the post-mortem investigation of electron beam welds and other micro-structural features of JET Hypervapotrons. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796

Hamilton, Niall Robert and Olsson Robbie, Mikael Brian and Wood, James and Galloway, Alexander and Katramados, Ioannis and Milnes, Joe (2011) The challenges in predicting the fatigue life of dissimilar brazed joints and initial finite element results for a tungsten to EUROFER97 steel brazed joint. Fusion Engineering and Design, 86 (9-11). pp. 1642-1645. ISSN 0920-3796

Lees, Andrew and Wood, James (2011) Skills development and recoding in engineering analysis and simulation : Industry needs. In: NAFEMS World Congress, NWC2011, 2011-05-23 - 2011-05-26.

Neilson, Robbie and Wood, J. and Hamilton, R. and Li, H. (2010) A comparison of plastic collapse and limit loads for single mitred pipe bends under in-plane bending. International Journal of Pressure Vessels and Piping, 87 (10). pp. 550-558. ISSN 0308-0161

Alexander, L.A. and Wood, J. (2009) A study of the low-cycle fatigue failure of a galvanised steel lighting column. Engineering Failure Analysis, 16 (7). pp. 2153-2162. ISSN 1350-6307

Muscat, Martin and Degiorgio, Kevin and Wood, James (2009) Comparison between different approaches for the evaluation of the hot spot structural stress in welded pressure vessel components. In: ASME Pressure Vessels and Piping Conference, 2009-07-26 - 2009-07-30.

Wood, James and Alexander, Louise A. and Taylor, Ian (2009) An experimental and finite element study of the low-cycle fatigue failure of a galvanised steel lighting column. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19.

Wood, J. (2008) A review of literature for the structural assessment of mitred bends. International Journal of Pressure Vessels and Piping, 85 (5). pp. 275-294. ISSN 0308-0161

Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Gray, T.G.F. and Wood, J. (2007) Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 433-446. ISSN 0309-3247

Wood, J. (2007) Stresses in the vicinity of an un-reinforced mitre intersection: an experimental and finite element comparison. Journal of Strain Analysis for Engineering Design, 42 (5). pp. 325-335. ISSN 0309-3247

Wood, J. (2006) CCOPPS: Certification of competencies in the power and pressure systems industry. In: Simulation of Power Generation Technology Seminar, 2006-09-27.

Wood, Jim; (2005) The FENET plate/shell fabrication procedural benchmark and 'round robin' exercise. In: Engineering Simulation. NAFEMS.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2004) Influence of oxide film defects generated in filling on the mechanical strength of aluminium alloy castings. Materials Science and Technology, 20 (4). pp. 505-513. ISSN 0267-0836

Wood, J. (2004) Glasgow's contribution to science and engineering across the FENET business sectors. In: 7th FENET Technology Workshop, 2004-10-07.

Wood, Jim (2004) Procedural benchmarks for common fabrication details in plate/shell structures. In: FENET Multi-physics and Analysis Workshop, 2004-03-25.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) The Influence of Oxide Film Defects on the Mechanical Strength of Al Castings. In: Proceedings of the European Metallurgy Conference, EMC 03, Hannover, Germany, 2003-01-01.

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093

Wood, J. and Nash, D.H. (2003) Some observations on the education and professional development of finite element users. In: Proceedings of the NAFEMS World Congress on Innovative Engineering Simulation Technology, 2003-05-27 - 2003-05-31.

Wood, J. (2003) Analysis and simulation tools for engineering designers. In: NAFEMS Workshop, 2003-12-01.

Wood, J. (2003) Examination of cross-industry best practice in the modelling of details common in fabricated plate/shell construction. In: The 5th FENET Technical Workshop, 2003-10-01.

Wood, J. (2003) The cardinal sins of FEA: Part I. BENCHmark, 99. p. 99. ISSN 0951-6859

Wood, Jim (2003) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 4th FENET Technology Workshop, 2003-02-26.

Wood, J. (2002) Barriers to the effective use of finite element analysis in industry. In: FENET Workshop, 2002-02-27 - 2002-02-28.

Wood, J. (2002) Preliminary observations on the FENET industry needs survey and some recommendations. In: 2nd FENET Annual Industry Meeting, 2002-12-01.

Wood, J. (2002) Some thoughts on relevant educational and professional development issues for users of finite element systems. In: The 3rd FENET Technology Workshop, 2002-09-01.

Wood, J. and Thomson, J. (2002) Web-based learning material for engineering analysis. In: NAFEMS/FENET Awareness Seminar on Web-based Training for Engineering Analysis, 2002-06-13 - 2002-06-14. (Unpublished)

Li, L. and Yang, X. and Wood, J. (2002) A comparison of two numerical modelling approaches for the simulation of particle dispersion in a turbulent mixing layer. In: Proceedings of the 15th International Congress of Congress of Chemical and Process Engineering, 2002-08-25 - 2002-08-29.

Wood, J. (2002) A proposed user survey and possible approaches to reducing barriers to the effective use of FEA in industry. In: 2nd FENET Technology Workshop, 2002-06-13.