Browse by Author or creator
Article
McKay, John and Miscandlon, Jill and Konkova, Tatyana (2024) The design and optimisation of additively manufactured windings utilising data driven algorithms for minimal loss in electric machines. IEEE Access. ISSN 2169-3536 (In Press)
Myshlyaev, M. and Korznikova, G. and Konkova, T. and Korznikova, E. and Aletdinov, A. and Khalikova, G. and Raab, G. and Mironov, S. (2023) Microstructural evolution during superplastic deformation of Al-Mg-Li alloy : dynamic recrystallization or grain-boundary sliding? Journal of Alloys and Compounds, 936. 168302. ISSN 0925-8388
Korznikova, Galia Ferdinandovna and Khalikova, Gulinara Rashidovna and Mironov, Sergey Yurievich and Aletdinov, Ainur Faradatovich and Korznikova, Elena Aleksandrovna and Konkova, T.N. and Myshlyaev, Mikhail Mikhailovich (2022) СВЕРХПЛАСТИЧЕСКОЕ ПОВЕДЕНИЕ АЛЮМИНИЕВОГО СПЛАВА 1420 С МЕЛКОЗЕРНИСТОЙ СТРУКТУРОЙ. Physical Mesomechanics, 25 (2). pp. 47-55. ISSN 1683-805X
Myshlyaev, Mikhail and Mironov, Sergey and Korznikova, Galia and Konkova, Tatyana and Korznikova, Elena and Aletdinov, Ainur and Khalikova, Gulnara and Raab, George and Semiatin, Sheldon Lee (2022) EBSD study of superplasticity : new insight into a well-known phenomenon. Journal of Alloys and Compounds, 898. 162949. ISSN 0925-8388
Ferguson, M. and Konkova, T. and Violatos, I. (2021) Microstructural evolution of an interface region in a nickel-based superalloy joint produced by direct energy deposition. Proceedings of the International Conference on Welding and Additive Manufacturing, 15. pp. 47-54. ISSN 1307-6892
Hicks, C. and Konkova, T. and Blackwell, P. (2020) Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates. Materials Characterization, 170. 110675. ISSN 1044-5803
Hicks, C. and Konkova, T. and Blackwell, P. (2020) Microstructure development in Laser Metal Deposition of Ti-5553. MATEC Web of Conferences, 321. 03019. ISSN 2261-236X
Myshlyaev, M. and Mironov, S. and Korznikova, G. and Konkova, T. and Korznikova, E. and Aletdinov, A. and Khalikova, G. (2020) EBSD study of superplastically strained Al-Mg-Li alloy. Materials Letters, 275. 128063. ISSN 0167-577X
Aletdinov, A. and Mironov, S. and Korznikova, G. F. and Konkova, T. and Zaripova, R. G. and Myshlyaev, M. M. and Lee Semiatin, S. L. (2019) Martensite-to-austenite reversion and recrystallization in cryogenically-rolled type 321 metastable austenitic steel. Metallurgical and Materials Transactions A, 50 (3). pp. 1346-1357. ISSN 1073-5623
Rahimi, S. and Konkova, T. N. and Violatos, I. and Baker, T. N. (2019) Evolution of microstructure and crystallographic texture during dissimilar friction stir welding of duplex stainless steel to low carbon-manganese structural steel. Metallurgical and Materials Transactions A, 50 (2). pp. 664-687. ISSN 1073-5623
Aletdinov, Ainur and Mironov, S. and Korznikova, G. and Konkova, Tatyana and Zaripova, Rida and Myshlyaev, Michail and Lee Semiatin, S. (2019) EBSD investigation of microstructure evolution during cryogenic rolling of type 321 metastable austenitic steel. Materials Science and Engineering: A, 745. pp. 460-473. ISSN 0921-5093
Korznikova, Galia and Mironov, Sergey and Konkova, Tatyana and Aletdinov, Ainur and Zaripova, Rida and Myshlyaev, Michail and Lee Semiatin, Sheldon (2018) EBSD characterization of cryogenically rolled type 321 austenitic stainless steel. Metallurgical and Materials Transactions A, 49 (12). pp. 6325-6336. ISSN 1073-5623
Konkova, T. and Rahimi, S. and Mironov, S. and Baker, T.N. (2018) Effect of strain level on the evolution of microstructure in a recently developed AD730 nickel based superalloy during hot forging. Materials Characterization, 139. pp. 437-445. ISSN 1044-5803
Aletdinov, Ainur and Mironov, Sergey and Korznikova, Galia and Zaripova, Rida and Konkova, Tatyana and Myshlyaev, Michail (2017) EBSD анализ микроструктуры аустенитной стали после прокатки в криогенных условиях. Materials Physics and Mechanics, 33 (1). pp. 29-40. ISSN 1605-2730
Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander and Korznikova, Galia and Myshlyaev, Mikhail M. and Semiatin, S. Lee (2016) Grain growth during annealing of cryogenically-rolled Cu-30Zn brass. Journal of Alloys and Compounds, 666. pp. 170-177. ISSN 0925-8388
Konkova, T. and Valeev, I. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2016) Microstructure response of cryogenically-rolled Cu-30Zn brass to electric-current pulsing. Journal of Alloys and Compounds, 659. pp. 184-192. ISSN 0925-8388
Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander and Korznikova, Galia and Myshlyaev, Mikhail and Semiatin, Lee (2015) A two-step approach for producing an ultrafine-grain structure in Cu-30Zn brass. Materials Letters, 161. pp. 1-4. ISSN 0167-577X
Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2015) Effect of cryogenic temperature and change of strain path on grain refinement during rolling of Cu-30Zn brass. Materials and Design, 86. pp. 913-921. ISSN 0264-1275
Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) Annealing behavior of cryogenically-rolled Cu-30Zn brass. Journal of Alloys and Compounds, 648. pp. 858-863. ISSN 0925-8388
Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) Grain structure evolution during cryogenic rolling of alpha brass. Journal of Alloys and Compounds, 629. pp. 140-147. ISSN 0925-8388
Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) An EBSD investigation of cryogenically-rolled Cu-30%Zn brass. Materials Characterization, 101. pp. 173-179. ISSN 1044-5803
Konkova, Tatyana and Valeev, Irshat and Mironov, Sergey and Korznikov, Alexander and Myshlyaev, Michail and Lee Semiatin, S. (2014) Effect of electric-current pulses on grain-structure evolution in cryogenically rolled copper. Journal of Materials Research, 29 (22). pp. 2727-2737. ISSN 0884-2914
Konkova, T.N. and Mironov, S. Yu and Ke, Y. and Ohnuki, J. (2014) Microstructural characteristics of electrodeposited damascene copper lines. Letters on Materials, 4 (2). pp. 104-107. ISSN 2410-3535
Kon'kova, Tatyana and Mironov, S. Yu and Korznikov, A. V. and Myshlyaev, M. M. (2014) Influence of low-temperature annealing on the microstructure of cryogenically deformed copper. Physics of the Solid State, 56 (2). pp. 235-241. ISSN 1090-6460
Ke, Y. and Konkova, T. and Mironov, S. and Ohnuki, J. (2012) Effect of annealing temperature on structure of electrodeposited nano-scale copper wires. Letters on Materials, 2 (4). pp. 198-201. ISSN 2410-3535
Konkova, Tatyana and Mironov, S. and Korznikov, A. and Myshlyaev, Michail (2012) Анализ спектра разориентировок на основе удельной поверхности границ. Deformation and Fracture of materials (6). pp. 41-46. ISSN 1814-4632
Konkova, Tatyana and Mironov, S. and Korznikov, A. and Myshlyaev, Michail (2012) Разделение механических двойников и двойников отжига посредством EBSD. Физическая мезомеханика, 15 (3). pp. 101-104. ISSN 1683-805X
Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Оценка эффективности криогенной деформации для измельчения микроструктуры крупнозернистой меди. Deformation and Fracture of materials (10). pp. 6-16. ISSN 1814-4632
Konkova, T. and Mironov, S. and Korznikov, A. and Semiatin, S. L. (2011) On the room-temperature annealing of cryogenically rolled copper. Materials Science and Engineering: A, 528 (24). pp. 7432-7443. ISSN 0921-5093
Konkova, T.N. and Mironov, S.Y. and Korznikov, A.V. (2011) Кристаллографический анализ аномального роста зерен в криогенно-деформированной меди. Letters on Materials, 1 (3). pp. 162-166. ISSN 2410-3535
Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Аномальный рост зерен в криогенно-деформированной меди. Физическая мезомеханика, 14 (4). pp. 29-37. ISSN 1683-805X
Konkova, Tatyana and Mironov, S. and Korznikov, A. (2011) Об эффективности криогенной деформации для измельчения микроструктуры меди. Физическая мезомеханика, 14 (1). pp. 83-92. ISSN 1683-805X
Konkova, T. and Mironov, S. and Korznikov, A. and Semiatin, S. L. (2010) Microstructural response of pure copper to cryogenic rolling. Acta Materialia, 58 (16). pp. 5262-5273. ISSN 1359-6454
Konkova, Tatyana and Mironov, Sergey and Danilenko, Valery and Korznikov, A. (2010) Двустадийная криогенная деформация меди. Deformation and Fracture of materials, 6. pp. 13-20. ISSN 1814-4632
Konkova, Tatyana and Mironov, S. and Korznikov, A. (2010) Криогенная деформация меди. Упрочняющие технологии и покрытия, 1. pp. 33-39. ISSN 1813-1336
Konkova, Tatyana and Mironov, Sergey and Korznikov, A. (2009) Формирование микроструктуры в ходе криогенной прокатки меди. Rolling (12). pp. 2-8.
Konkova, Tatyana and Mironov, S. and Korznikov, A. (2009) Влияние криогенной прокатки на микроструктуру и механические свойства меди. Упрочняющие технологии и покрытия (9). pp. 40-47. ISSN 1813-1336
Konkova, Tatyana and Mironov, Sergey and Korznikov, A. (2009) Влияние криогенной осадки на микроструктуру катаной мелкозернистой меди. Rolling (9). pp. 6-12.
Book Section
Konkova, Tatyana and Mironov, S. and Rahimi, Salah; (2018) Evolution of microstructure and residual stresses in a CP-Ti bioimplant produced by incremental sheet forming. In: Ultrafine Grained and Nanostructured Materials. Bashkir State University, SUN, pp. 142-143. ISBN 978-5-7477-4721-0
Konkova, T. and Mironov, S. and Ke, Y. and Onuki, J.; (2013) Annealing effect on the structure characteristics of nano-scale damascene copper lines. In: 2013 IEEE International Interconnect Technology Conference, IITC 2013. IEEE, JPN. ISBN 9781479904389
Conference or Workshop Item
Konkova, T. and Mironov, S. and Rahimi, S. (2018) Characterisations of microstructure and residual stress in a customised cranial implant produced by Additive Manufacturing from commercially pure (CP) titanium. In: Manufactured using Advanced Powder Processes (MAPP), 2018-01-30 - 2018-01-31, University of Sheffield.
Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2017) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: Strath Wide Researcher Conference 2017, 2017-05-30 - 2017-05-30, Strathclyde.
Korznikova, G. and Konkova, T. and Mironov, S. and Korznikov, A. and Myshlyaev, M.M. (2016) Эволюция микроструктуры в ходе криогенной прокатки латуни Л70. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07, Russian Federation.
Konkova, T. N. and Rahimi, S. and Blackwell, P. L. (2016) Microstructure and residual stress in Ti-6l-4V parts made by different additive manufacturing techniques. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07, Russian Federation.
Konkova, T. and Valeev, I. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2016) Microstructure response of cryogenically-rolled Cu-30Zn brass to electric-current pulsing. In: International Conference on Ultrafine Grained and Nanocrystalline Materials, 2016-10-03 - 2016-10-07, Russian Federation.
Konkova, T.H. and Mironov, S. and Ke, Yiqing and Onuki, J. (2013) Структура электроосажденных медных нанопроволок после отжига в широком диапазоне температур. In: V Russian conference of nanomaterials, 2013-09-23 - 2013-09-27.
Konkova, T.H. and Mironov, S. and Korznikov, A.B. and Myshlyaev, M.M. (2012) Рекристаллизация криогенно деформированной меди. In: International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2012), 2012-10-08 - 2012-10-12.
Konkova, Tatyana and Ke, Yiqing and Mironov, Sergey and Onuki, Jin (2012) Analysis of electrodeposited nano-scale copper wire microstructure by EBSD method. In: Advanced Metallization Conference 2012: 22nd Asian Session, 2012-10-22 - 2012-10-25, The University of Tokyo.
Konkova, Tatyana and Ke, Yiqing and Mironov, S. and Onuki, J. (2012) Microstructure analysis of electrodeposited nanoscale copper wire by EBSD technique. In: International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2012), 2012-10-08 - 2012-10-12.
Konkova, T. and Ke, Y. and Mironov, S. and Onuki, J. (2012) Structure evolution of electrodeposited nano-scale copper wires during annealing in wide temperature range. In: 2012 Autumn Meeting of the Japan Institute of Metals, 2012-09-17 - 2012-09-19.
Ke, Yiqing and Namekawa, T and Konkova, Tatyana and Onuki, J. (2012) The grain size distribution investigation of high purity plating Cu wire in depth direction. In: International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2012), 2012-10-08 - 2012-10-12.
Konkova, Tatyana and Korznikov, A. and Mironov, S. (2011) Пластическая деформация меди при криогенной температуре. In: International conference for young researchers “Nanomaterials and nanotechnologies in Metallurgy and Materials Science”, 2011-10-13 - 2011-10-15.
Konkova, Tatyana (2011) Интенсивная пластическая деформация меди при криогенной температуре. In: Russian conference “Mavlutovskie chteniya”, 2011-03-21 - 2011-03-24.
Konkova, Tatyana and Mironov, Sergey and Korznikov, Alexander (2011) Grain refinement in copper via cryogenic deformation. In: Congress on Nanotechnologies, The Third International Symposium on Bulk Nanostructured Materials: from fundamentals to innovations, BNM2011, 2011-08-23 - 2011-08-26.
Konkova, T.H. (2010) Интенсивная пластическая деформация при температуре жидкого азота. In: VII Russian conference of young research assistants and post-graduate students, 2010-11-08 - 2010-11-11.
Konkova, T.H. and Mironov, S. and Korznikov, A. (2010) Низкотемпературная деформация меди. In: X Peterburgskie chteniya, 2010-04-13 - 2010-04-15.
Konkova, T.H. and Mironov, S. and Korznikov, A. (2009) Деформация меди в криогенных условиях. In: X International Conference "Ural Seminar of Young Material Scientists", 2009-12-07 - 2009-12-11.
Konkova, T.N. and Mironov, S.Yu. and Korznikov, A.V. (2009) Severe cryogenic plastic deformation of copper. In: RusNanoTech 2009, 2009-10-06 - 2009-10-08.
Konkova, T.H. and Salischev, G. (2008) Механическое поведение меди, подвергнутой ударно-волновому нагружению. In: XIX Ural School of material scientists, 2008-02-04 - 2008-02-08.
Konkova, Tatyana (2008) Cryogenic severe deformation influence on the structure of copper. In: International Workshop on the Plasticity of Nanocrystalline Metals, 2008-09-28 - 2008-10-01, Lake Bostal.