Browse by Author or creator

Article

Das, Rajkumar and Sivaswamy, Giribaskar and Lalvani, Himanshu and Singh, Ajit Pal (2024) Fracture toughness and microstructural analysis of rotary friction welded S355J2 and SS316L steels for critical applications. Journal of Advanced Joining Processes, 10. 100244. ISSN 2666-3309

Connolly, David and Fabris, Mathieu and Sivaswamy, Giribaskar and Rahimi, Salah and Vorontsov, Vassili (2024) Miniaturised experimental simulation and combined modelling of open-die forging of Ti-6Al-4V titanium alloy. Journal of Materials Research and Technology, 30. pp. 3622-3639. ISSN 2238-7854

Hicks, Calum and Tamimi, Saeed and Sivaswamy, Giribaskar and Pimentel, Misael and Mckegney, Scott and Fitzpatrick, Stephen (2024) Hybrid manufacturing approach for landing gear applications : WAAM Ti–6Al–4V on forged Ti–5Al–5Mo–5V–3Cr. Journal of Materials Research and Technology, 30. pp. 6596-6608. ISSN 2238-7854

Connolly, David and Sivaswamy, Giribaskar and Rahimi, Salaheddin and Vorontsov, Vassili (2023) Miniaturised experimental simulation of open-die forging. Journal of Materials Research and Technology, 26. pp. 3146-3161. ISSN 2238-7854

Singh, Ajit Pal and Torrens, Rob and Gabbitas, Brian and Sivaswamy, Giribaskar (2023) Effect of heat treatments on microstructure and mechanical properties of low-cost Ti-6Al-4V alloy produced by thermo-mechanical powder consolidation route. Metals, 13 (1). 173. ISSN 2075-4701

Souza, Paul M. and Sivaswamy, Giribaskar and Bradley, Luke and Barrow, Andrew and Rahimi, Salah (2022) An innovative constitutive material model for predicting high temperature flow behaviour of inconel 625 alloy. Journal of Materials Science, 57 (44). pp. 20794-20814. ISSN 0022-2461

Souza, Paul M. and Sivaswamy, Giribaskar and Hall, Elizabeth and Rahimi, Salaheddin (2022) An analysis of the forgeability of Ti-10V-2Fe-3Al β titanium alloy using a combined Estrin Mecking and Avrami material constitutive model. International Journal of Mechanical Sciences, 216. 106975. ISSN 0020-7403

Souza, Paul M. and Sivaswamy, Giribaskar and Andreu, Aurik and Rahimi, Salaheddin (2021) A novel cyclic thermal treatment for enhanced globularisation kinetics in Ti-6Al-4V alloy : experimental, constitutive and FE based analyses. Journal of Alloys and Compounds. 162859. ISSN 0925-8388

Tamimi, Saeed and Sivaswamy, Giribaskar and Pirgazi, Hadi and Amirkhiz, Babak Shalchi and Moturu, Shanmukha and Siddiq, M. Amir and Kockelmann, Winfried and Blackwell, Paul (2021) A new route for developing ultrafine-grained Al alloy strips using repetitive bending under tension. Materials & Design, 206. 109750. ISSN 0261-3069

da Silva, L. and Sivaswamy, G. and Sun, L. and Rahimi, S. (2021) Effect of texture and mechanical anisotropy on flow behaviour in Ti-6Al-4V alloy under superplastic forming conditions. Materials Science and Engineering: A, 819. 141367. ISSN 0921-5093

Tamimi, Saeed and Sivaswamy, Giribaskar and Siddiq, M. Amir and Rahimi, Salah and Leacock, Alan and Blackwell, Paul (2020) Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension. Materials & Design, 193. 108814. ISSN 0261-3069

Chidambaram, S. and Giribaskar, S. and Parameswaran, Venkitanarayanan and Gouthama (2019) Structural integrity of ultrafine grain Al-3%Mg alloy under dynamic loading conditions. Procedia Structural Integrity, 14. pp. 226-233. ISSN 2452-3216

Siddiqi, Muftooh Ur Rehman and Corney, Jonathan R. and Sivaswamy, Giribaskar and Amir, Muhammad and Bhattacharya, Rahul (2018) Design and validation of a fixture for positive incremental sheet forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 629-643. ISSN 2041-2975

Tamimi, Saeed and Sivaswamy, Giribaskar and Violatos, Ioannis and Moturu, Shanmukha Rao and Rahimi, Salah and Blackwell, Paul (2017) Modelling and experimentation of the evolution of texture in an Al-Mg alloy during earing cupping test. Procedia Engineering, 207. pp. 1-6. ISSN 1877-7058

Qarni, Muhammad Jawad and Sivaswamy, Giribaskar and Rosochowski, Andrzej and Boczkal, Sonia (2017) On the evolution of microstructure and texture in commercial purity titanium during multiple passes of incremental equal channel angular pressing (I-ECAP). Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 699. pp. 31-47. ISSN 0921-5093

Qarni, Muhammad Jawad and Sivaswamy, Giribaskar and Rosochowski, Andrzej and Boczkal, Sonia (2017) Effect of incremental equal channel angular pressing (I-ECAP) on the microstructural characteristics and mechanical behaviour of commercially pure titanium. Materials & Design, 122. pp. 385-402. ISSN 0264-1275

Salamati, M and Tamimi, S and Moturu, Shanmukha Rao and Sivaswamy, G and Qarni, M and Rosochowski, A (2017) Microstructure and mechanical properties of Al-1050 during incremental ECAP. IOP Conference Series: Materials Science and Engineering, 194. 012009. ISSN 1757-899X

Devarajan, Nagarajan and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Heck, David P. and Siddiq, Muhammad Amir (2014) Complex incremental sheet forming using back die support on aluminium 2024, 5083 and 7075 alloys. Procedia Engineering, 81. 2298–2304. ISSN 1877-7058

Eipert, Irena and Sivaswamy, Giribaskar and Bhattacharya, Rahul and Siddiq, Amir and Blackwell, Paul (2014) Improvement in ductility in commercially pure titanium alloys by stress relaxation at room temperature. Key Engineering Materials, 611-612. pp. 92-98. ISSN 1013-9826

Conference or Workshop Item

Tamimi, S. and Moturu, S. and Amirkhiz, B. S. and Sivaswamy, G. and Parameswaran, E. and Blackwell, P. (2020) Formability of AA-7075 sheets subjected to repetitive bending under tension. In: International Conference on Plasticity, Damage & Fracture, 2020-01-03 - 2020-01-09, Barcelo Maya Grand Resort.