Browse by Author or creator

Article

Singo, Nthambe and Coles, John and Rosochowska, Malgorzata and Lalvani, Himanshu and Hernandez, Jose and Ion, William (2018) Optimising mechanical properties of hot forged nickel superalloy 625 components. AIP Conference Proceedings, 1960 (1). 110010. ISSN 1551-7616

Presz, Wojciech and Rosochowska, Malgorzata (2017) Application of semi-physical modelling of interface surface roughness in design of pre-stressed microforming dies. Procedia Engineering, 207. pp. 1004-1009. ISSN 1877-7058

Bylja, Olga and Reshetov, Aleksey and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2017) Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys. Procedia Engineering. ISSN 1877-7058 (In Press)

Reshetov, Aleksey and Bylja, Olga and Gzyl, Michal and Rosochowska, Malgorzata and Blackwell, Paul (2016) Modelling microstructure evolution in ATI 718Plus® alloy. Key Engineering Materials, 716. pp. 352-359. ISSN 1013-9826

Rosochowski, Andrzej and Olejnik, Lech and Rosochowska, Malgorzata (2015) Tailored sheared blanks produced by incremental ECAP. Key Engineering Materials, 651-653. pp. 651-656. ISSN 1013-9826

Rosochowski, Andrzej and Rosochowska, Malgorzata and Olejnik, Lech (2014) A method of forming oblique rings. Procedia Engineering, 81. pp. 568-573. ISSN 1877-7058

Rosochowski, Andrzej and Rosochowska, Malgorzata and Olejnik, Lech (2013) Severe plastic deformation by incremental angular splitting. Journal of Materials Science, 48 (13). pp. 4557-4562. ISSN 0022-2461

Rosochowski, Andrzej and Olejnik, Lech and Richert, Jan and Rosochowska, Malgorzata and Richert, Maria (2013) Equal channel angular pressing with converging billets—experiment. Materials Science and Engineering: A, 560. pp. 358-364. ISSN 0921-5093

Rosochowski, Andrzej and Rosochowska, Malgorzata and Olejnik, Lech (2012) New SPD process of incremental angular splitting. Key Engineering Materials, 504-506. pp. 569-574. ISSN 1013-9826

Rosochowski, Andrzej and Rosochowska, Malgorzata and Olejnik, J and Verlinden, B (2010) Incremental equal channel angular pressing of sheets. Steel Research International, 81 (9). ISSN 1611-3683

Rosochowska, Malgorzata and Rosochowski, Andrzej and Olejnik, J (2010) FE simulation of micro-extrusion of a conical pin. International Journal of Material Forming, 3 (Supple). pp. 423-426. ISSN 1960-6206

Rosochowska, M. and Rosochowski, A. and Olejnik, L. (2009) Finite element analysis of forward extrusion of 1010 steel. Annals of Dunărea de Jos, University of Galaţi, Fascicle V, Technologies in Machine Building. ISSN 1221-4566

Rosochowski, A. and Rosochowska, M. (2003) Dimensional effects in the warm calibration of a stainless steel cylinder. Journal of Materials Processing Technology, 135 (2-3). pp. 125-130. ISSN 0924-0136

Book Section

Roszak, Jacob Aleksander and Rosochowski, Andrzej and Rosochowska, Malgorzata; (2021) Effects of lubrication, specimen preparation and tool coating on the friction behavior of commercially pure titanium at elevated temperature. In: 24th International Conference on Material Forming. Université de Liège, BEL. ISBN 9782870190036

Roszak, J.A. and Rosochowski, A. and Rosochowska, M.; Gao, James and El Souri, Mohammed and Keates, Simeon, eds. (2017) Chemical etching as a method of combatting adhesive tool wear during severe plastic deformation of commercially-pure titanium. In: Advances in Transdisciplinary Engineering. IOS Press, GBR, pp. 15-20. ISBN 978-1-61499-791-7

Rosochowska, Malgorzata and Balendra, Rajendram and Rosochowski, Andrzej and Olejnik, Lech; Tewari, Asim and Narasimhan, K and Date, Prashant P, eds. (2012) FE modelling of multi-stage drawing of a miniature tubular component with a middle flange and rounded edge. In: IDDRG 2012. International Deep-Drawing Research Group, IND, pp. 128-133.

Conference or Workshop Item

Paquette, Arthur and Rahimi, Salah and Violatos, Ioannis and Langlois, Laurent and Dumont, Christian and Blaizot, Jérôme and Rosochowska, Malgorzata and Bigot, Régis (2021) On the evolution of microstructure and mechanical properties of type 316 austenitic stainless steel during ingot to billet conversion process. In: 24th International ESAFORM Conference on Material Forming, 2021-04-14 - 2021-04-16, Digital Event.

Falsafi, J. and Rosochowska, M. and Jadhav, P. and Tricker, D. (2017) Lower cost automotive piston from 2124/SiC/25p metal-matrix composite. In: SAE World Congress Experience, 2017-04-04 - 2017-04-06, Cobo Center.

Reshetov, Aleksey and Bylya, Olga and Stefani, Nicola and Rosochowska, Malgorzata and Blackwell, Paul (2016) An approach to microstructure modelling in nickel based superalloys. In: Superalloys 2016, 2016-09-11 - 2016-09-15.