Items where subject is "Naval Science"

Aksu, S. and Vassalos, D. and Tuzcu, C. and Mikelis, N. and Swift, P. (2004) A risk-based design methodology for pollution prevention and control. In: International Conference on Design and Operation of Double Hull Tankers, 2004-02-25 - 2004-02-26.

Ayaz, Z. and Turan, O. and Vassalos, D. (2005) Manoeuvring and seakeeping aspects of pod-driven ships. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 219. pp. 77-91. ISSN 1475-0902

Ayaz, Z. and Vassalos, D. and Spyrou, K. (2006) Manoeuvring behaviour of ships in extreme astern seas. Ocean Engineering, 33 (17-18). pp. 2381-2434. ISSN 0029-8018

Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D and Pham, X.P. (2006) Wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (4). pp. 195-203. ISSN 1475-0902

Barltrop, N. and Varyani, K.S. and Grant, A.D. and Clelland, D. and Pham, X.P. (2007) Investigation into wave-current interactions in marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (2). pp. 233-242. ISSN 0957-6509

Bole, M. and Lee, B.S. (2006) Integrating parametric hull generation into early stage design. Ship Technology Research, 53. pp. 115-137. ISSN 0937-7255

Bole, M. and Lee, B.S. (2003) An hierarchical approach to hull form design. In: NAV 2003, 2003-06-24 - 2003-06-27.

Centeno, R. and Varyani, K.S. and Guedes Soares, C. (2001) Experimental study on the influence of hull spacing on hard-chine catamaran motions. Journal of Ship Research, 45 (3). pp. 216-227. ISSN 0022-4502

Clelland, D. (2003) Study on roll motion of a damaged FPSO. In: International Symposium on Naval Architecture and Ocean Engineering, 2003-09-23 - 2003-09-26.

Clelland, D. and Day, A.H. and Nixon, E. (2003) Experimental and numerical investigation of 'Arrow' trimarans. In: 7th International Conference of Fast Sea Transportation, 2003-10-07 - 2003-10-10.

Collette, M. and Incecik, A. (2006) An approach for reliability based fatigue design of welded joints on aluminium high-speed vessels. Journal of Ship Research, 50 (1). pp. 85-98. ISSN 0022-4502

Day, A.H. and Doctors, L. (2001) Wave-wake criteria and low-wash hull-form design. The Transactions of the Royal Institution of Naval Architects. Part B, International Journal of Small Craft Technology, 143. pp. 253-265.

Day, A.H. and Doctors, L.J. (2001) Rapid estimation of near-and far-field wave wake from ships and application to hull-form design and optimization. Journal of Ship Research, 45 (1). pp. 73-84. ISSN 0022-4502

Huang, S. and Olsen, R. (2002) Hydrodynamic forces on vertical piggyback cylinders in regular waves. International Journal of Offshore and Polar Engineering, 12 (4). pp. 249-255. ISSN 1053-5381

Jasionowski, A. and Vassalos, D. and Guarin, L. (2003) Time-based survival criteria for passenger/ro-ro vessels. Marine Technology, 40 (4). pp. 278-287. ISSN 0025-3316

Jefferson, M. and Zhou, P. and Hindmarch, G. (2003) Analysis by computer simulation of a combined gas turbine and steam turbine (COGAS) system for marine propulsion. Proceedings- Institute of Marine Engineering Science and Technology Part A Journal of Marine Engineering and Technology, 2003 (2). pp. 43-53. ISSN 1476-1548

Khan, Shahroz and Kaklis, Panagiotis and Serani, Andrea and Diez, Matteo (2022) Geometric moment-dependent global sensitivity analysis without simulation data : application to ship hull form optimisation. Computer-Aided Design, 151. 103339. ISSN 0010-4485

Korkut, Emin and Atlar, Mehmet and Incecik, Atilla (2005) An experimental study of global loads acting on an intact and damaged ro-ro ship model. Ocean Engineering, 32 (11-12). pp. 1370-1403. ISSN 0029-8018

Letizia, L. and Vassalos, D. and Jasionowski, A. (2004) New insights into ship-floodwater sea dynamics. International Shipbuilding Progress, 51 (2-3). pp. 273-293. ISSN 0020-868X

Li, H. and Zhou, P. and Ma, X. (2005) Pattern recognition on diesel engine working condition by using a novel methodology - Hilbert spectrum entropy. Proceedings- Institute of Marine Engineering Science and Technology Part A Journal of Marine Engineering and Technology, A6. pp. 43-48. ISSN 1476-1548

Nan Xie, J.X. and Vassalos, D. and Jasionowski, A. (2005) A study of hydrodynamics of three-dimensional planing surface. Ocean Engineering, 32 (13). pp. 1539-1555. ISSN 0029-8018

Olcer, A.I. and Alkaner, S. and Turan, O. (2004) Integrated multiple attributive decision support system for producibility evaluation in ship design. Journal of Ship Production, 20 (3). pp. 147-163. ISSN 8756-1417

Priftis, A. and Boulougouris, E. and Turan, O. and Papanikolaou, A. (2016) Parametric design and multi-objective optimisation of containerships. In: International Conference of Maritime Safety and Operations 2016, 2016-10-13 - 2016-10-14, University of Strathclyde.

Sayer, Philip George (2001) Assessment and accreditation of higher education in the UK. In: International Conference on Engineering Education 2001, 2001-08-06 - 2001-08-10.

Sayer, Philip George (2005) Final report and recommendations of the quality systems group. In: 24th International Towing Tank Conference, 2005-09-04 - 2005-09-10.

Tian, Xinna and Xiao, Youhong and Zhou, Peilin and Zhang, Wenping (2015) Optimization of the location of injector in urea-selective catalytic reduction system. Journal of Marine Science and Technology, 20 (2). pp. 238-248. ISSN 0948-4280

Turan, O. and Olcer, A.I. and Martin, P.L. (2003) Risk assessment of loss of life for fishing vessels in fuzzy environment. Safety and Reliability: the journal of the Safety and Reliability Society, 23 (2). ISSN 0961-7535

Turkmen, B.S. and Turan, O. (2007) A new integrated multi-objective optimisation algorithm and its application to ship design. Ships and Offshore Structures, 2 (1). pp. 21-37. ISSN 1754-212X

Varyani, K. and Pham, X.P. and Crossland, P. (2004) Green water investigation for a container ship. Ship Technology Research, 51 (4). pp. 151-161. ISSN 0937-7255

Varyani, K. and Vantorre, M. (2006) New generic equation for interaction effects on a moored containership due to passing tanker. Journal of Ship Research, 50 (3). pp. 278-287. ISSN 0022-4502

Vassalos, D. and Guarin, L. and Jasionowski, A. and Zheng, Y. (2003) A risk-based first-principles approach to assessing green seas loading on the hatch covers of bulk carriers in extreme weather conditions. Marine Structures, 16 (8). pp. 659-685. ISSN 0951-8339

Vassalos, D. and Lee, B.S. and Sayer, P.G. (2003) A rational method of project selection by post-graduate students. International Journal of Engineering Education, 19 (6). pp. 847-854. ISSN 0949-149X

Wetenhall, B. and Race, J.M. and Aghajani, H. and Barnett, J. (2017) The main factors affecting heat transfer along dense phase CO2 pipelines. International Journal of Greenhouse Gas Control, 63. 86–94. ISSN 1750-5836

Wu, W. and Huang, S. and Barltrop, N. (2002) Stationary and Hopf bifurcations of equilibrium positions of a cylinder situated in near and far wake fields of an upstream cylinder. International Journal of Offshore and Polar Engineering, 12 (1). pp. 31-33. ISSN 1053-5381

Xiao, Q. and Tsai, H.M. and Liu, F. (2003) Computation of transonic diffuser flows by a lagged k-omega turbulence model. Journal of Propulsion and Power, 19 (3). pp. 473-483. ISSN 1533-3876

Xiao, Q. and Tsai, Her-Mann and Liu, Feng (2006) A numerical study of transonic buffet on a supercritical airfoil. AIAA Journal, 44 (3). pp. 620-628. ISSN 0001-1452

Xie, N. and Vassalos, D. and Sayer, P.G. (2007) The effect of lift on the wave-making resistance of multi-hull craft. International Shipbuilding Progress, 54 (2-3). pp. 83-95. ISSN 0020-868X

Xu, L. and Barltrop, N. (2005) Wave slap loading on FPSO bows : research report 324. Health and Safety Executive.

Zhou, P. and Fet, A.M. and Michelsen, O. and Fet, K. (2003) A feasibility study of the use of biodiesel in recreational boats in the UK. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217 (3). pp. 149-158. ISSN 1475-0902