Browse by Author or creator

Article

Saghafi, Hamed and Palazzetti, Roberto and Heidary, Hossein and Brugo, Tommaso Maria and Zucchelli, Andrea and Minak, Giangiacomo (2020) Toughening behavior of carbon/epoxy laminates interleaved by PSF/PVDF composite nanofibers. Applied Sciences, 10 (16). 5618. ISSN 2076-3417

Yan, Xiu-Tian and Brinkmann, Wiebke and Palazzetti, Roberto and Melville, Craig and Li, Youhua and Bartsch, Sebastian and Kirchner, Frank (2018) Integrated mechanical, thermal, data and power transfer interfaces for future space robotics. Frontiers in Robotics and AI, 5. ISSN 2296-9144

Palazzetti, R. and Zucchelli, A. (2017) Electrospun nanofibers as reinforcement for composite laminates materials – a review. Composite Structures, 182. pp. 711-727. ISSN 0263-8223

Brugo, T. and Minak, G. and Zucchelli, A. and Yan, X.T. and Belcari, J. and Saghafi, H. and Palazzetti, R. (2017) Study on Mode I fatigue behaviour of Nylon 6,6 nanoreinforced CFRP laminates. Composite Structures, 164. pp. 51-57. ISSN 0263-8223

Brugo, T. and Palazzetti, R. (2016) The effect of thickness of Nylon 6,6 nanofibrous mat on Modes I-II fracture mechanics of UD and woven composite laminates. Composite Structures, 154. pp. 172-178. ISSN 0263-8223

Palazzetti, Roberto and Yan, Xiu (2016) Study on lubrication effect on motorbike chain transmissions. Industrial Lubrication and Tribology, 68 (5). ISSN 0036-8792

Fallahi, N. and Nardoni, G. and Heidary, H. and Palazzetti, R. and Yan, X.T. and Zucchelli, A. (2016) Supervised and non-supervised AE data classification of nanomodified CFRP during DCB tests. FME Transactions, 44 (4). pp. 415-421. ISSN 2406-128X (In Press)

Brugo, T. and Palazzetti, R. and Ciric-Kostic, S. and Yan, X. T. and Minak, G. and Zucchelli, A. (2016) Fracture mechanics of laser sintered cracked polyamide for a new method to induce cracks by additive manufacturing. Polymer Testing, 50. pp. 301-308. ISSN 0142-9418

Palazzetti, R (2015) Flexural behavior of carbon and glass fiber composite laminates reinforced with Nylon 6,6 electrospun nanofibers. Journal of Composite Materials, 49 (27). pp. 3407-3413. ISSN 0021-9983

Garcia, D. and Palazzetti, R. and Trendafilova, I. and Fiorini, C. and Zucchelli, A. (2015) Vibration-based delamination diagnosis and modelling for composite laminate plates. Composite Structures, 130. pp. 155-162. ISSN 0263-8223

Giuliese, G. and Palazzetti, R. and Moroni, F. and Zucchelli, A. and Pirondi, A. (2015) Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres. Composites Part B: Engineering, 78. pp. 384-392. ISSN 1359-8368

Alessi, Sabina and Di Filippo, Maria and Dispenza, Clelia and Focarete, Maria Letizia and Gualandi, Chiara and Palazzetti, Roberto and Pitarresi, Giuseppe and Zucchelli, Andrea (2015) Effects of nylon 6,6 nanofibrous mats on thermal properties and delamination behavior of high performance CFRP laminates. Polymer Composites, 36 (7). pp. 1303-1313. ISSN 0272-8397

Saghafi, Hamed and Palazzetti, Roberto and Zucchelli, Andrea and Minak, Giangiacomo (2015) Influence of electrospun nanofibers on the interlaminar properties of unidirectional epoxy resin/glass fiber composite laminates. Journal of Reinforced Plastics and Composites, 34 (11). pp. 907-914. ISSN 1530-7964

Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2015) Damage assessment based on general signal correlation : Application for delamination diagnosis in composite structures. European Journal of Mechanics - A/Solids, 49. pp. 197-204. ISSN 0997-7538

Saghafi, Hamed and Zucchelli, Andrea and Minak, Giangiacomo and Palazzetti, Roberto (2014) The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials. Composite Structures, 109 (1). pp. 41-47. ISSN 0263-8223

Palazzetti, Roberto and Yan, Xiu and Zucchelli, Andrea (2014) Influence of geometrical features of electrospun nylon 6,6 interleave on the CFRP laminates mechanical properties. Polymer Composites, 35 (1). pp. 137-150. ISSN 0272-8397

Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2014) Delamination assessment in structures made of composites based on general signal correlation. International Journal of Structural Stability and Dynamics, 14 (8). 1440022. ISSN 0219-4554

Palazzetti, Roberto and Zucchelli, Andrea and Trendafilova, Irina (2013) The self-reinforcing effect of nylon 6,6 nano-fibres on CFRP laminates subjected to low velocity impact. Composite Structures, 106. pp. 661-671. ISSN 0263-8223

Moroni, F. and Palazzetti, Roberto and Zucchelli, A. and Pirondi, A. (2013) A numerical investigation on the interlaminar strength of nanomodified composite interfaces. Composites Part B: Engineering, 55. pp. 635-641.

Da Costa Mattos, Heraldo and Monteiro, Antonio and Palazzetti, Roberto (2012) Failure analysis of adhesively bonded joints in composite materials. Materials and Design, 33 (1). pp. 242-247. ISSN 0261-3069

Palazzetti, R. and Zucchelli, A. and Gualandi, C. and Focarete, M. L. and Donati, L. and Minak, G. and Ramakrishna, S. (2012) Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates. Composite Structures, 94 (2). pp. 571-579. ISSN 0263-8223

Minak, Giangiacomo and Palazzetti, Roberto and Trendafilova, Irina and Zucchelli, Andrea (2010) Localization of a delamination and estimation of its length in a composite laminate beam by the VSHM and pattern recognition methods. Mechanics of Composite Materials, 46 (4). pp. 387-394. ISSN 0191-5665

Book Section

Yan, Xiu Tian and Bianco, Alessandro and Niu, Cong and Palazzetti, Roberto and Henry, Gwenole and Li, Youhua and Tubby, Wayne and Kisdi, Aron and Irshad, Rain and Sanders, Stephen and Scott, Robin; Yan, Xiu T and Bradley, David and Russell, David and Moore, Philip, eds. (2019) The AgriRover : a reinvented mechatronic platform from space robotics for precision farming. In: Reinventing Mechatronics. Springer, Switzerland. ISBN 9783030291310

Wenzel, Wiebke and Palazzetti, Roberto and Yan, Xiu T. and Bartsch, Sebastian; (2017) Mechanical, thermal, data and power transfer types for robotic space interfaces for orbital and planetary missions - a technical review. In: Proceedings of ASTRA 2017. European Space Agency, NLD.

Post, Mark A. and Palazzetti, Roberto and Yan, Xiu T.; (2015) AGRIBOT : enabling agricultural robotics with space hardware technology. In: 2015 Space Robotics Symposium – Present and Future Robotics in Space Applications. UNSPECIFIED.

Palazzetti, R. and Garcia, D. and Trendafilova, I. and Fiorini, C. and Zucchelli, A.; (2014) An investigation in vibration modeling and vibration-based monitoring for composite laminates. In: Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics. KU Leuven, GBR, pp. 3819-3828. ISBN 9789073802919

Giuliese, G. and Pirondi, A. and Furlotti, E. and Zucchelli, A. and Palazzetti, R.; (2014) Virtual assessment of a composite laminate with interleaved nanofibrous mat under impact loading. In: 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM, ESP. ISBN 9780000000002

Conference or Workshop Item

Fallahi, N. and Nardoni, G. and Palazzetti, R. and Zucchelli, A. (2016) Pattern recognition of acoustic emission signal during the mode I fracture mechanisms in carbon- epoxy composite. In: 32nd European Conference on Acoustic Emission Testing 2016, 2016-09-07 - 2016-09-09.

Brugo, T. and Minak, G. and Zucchelli, A. and Yan, X. T. and Saghafi, H. and Fotouhi, M. and Palazzetti, R. (2016) A study on fatigue behavior of nanointerleaved woven CFRP. In: European Conference on Composite Materials - ECCM 17, 2016-06-26 - 2016-06-30.

Yan, Xiu and Mair, Gordon and Li, Youhua and Palazzetti, Roberto (2013) A mechatronic conceptual approach to high value cake manufacturing automation. In: 2nd Workshop on Mechatronic Design, 2013-11-22 - 2013-11-22, Supméca (Institut Supérieur de Mécanique de Paris).

Thesis

Palazzetti, Roberto and Zucchelli, Andrea (2014) Electrospun nanofibrous interleaves in composite laminate materials. PhD thesis, University of Bologna.