Browse by Author or creator

Article

Marin Perez, Jonatan Emanuel and Comlekci, Tugrul and Gorash, Yevgen and MacKenzie, Donald (2024) Calibration of the DEM sliding friction and rolling friction parameters of a cohesionless bulk material. Particuology, 92. pp. 126-139. ISSN 2210-4291

Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer and Milne, Lewis (2023) Ultrasonic fatigue testing of structural steel S275JR+AR with insights into corrosion, mean stress and frequency effects. Materials, 16 (5). 1799. ISSN 1996-1944

Milne, Lewis Andrew and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2023) Frequency effects in ultrasonic fatigue testing (UFT) of Q355B structural steel. Procedia Structural Integrity, 42. pp. 623-630. ISSN 2452-3216

Comlekci, Tugrul and Marin Perez, Jonatan and Milne, Lewis and Gorash, Yevgen and MacKenzie, Donald (2023) Structural steel crack propagation experimental and numerical analysis. Procedia Structural Integrity, 42 (2022). pp. 694-701. ISSN 2452-3216

Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer (2022) Investigation of S275JR+AR structural steel fatigue performance in very high cycle domain. Procedia Structural Integrity, 38. pp. 490-496. ISSN 2452-3216

Okorokov, Volodymyr and Morgantini, Marta and Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph (2018) Corrosion fatigue of low carbon steel under compressive residual stress field. Procedia Engineering, 213. pp. 674-681. ISSN 1877-7058

Morgantini, Marta and MacKenzie, Donald and Comlekci, Tugrul and van Rijswick, Ralph (2018) The effect of mean stress on corrosion fatigue life. Procedia Engineering, 213. pp. 581-588. ISSN 1877-7058

Gorash, Yevgen and Comlekci, Tugrul and Hamilton, Robert (2017) CAE-based application for identification and verification of hyperelastic parameters. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (7). pp. 611-626. ISSN 1464-4207

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2017) Investigation of fatigue assessments accuracy for beam weldments considering material data input and FE-mode type. Journal of Physics: Conference Series, 843. 012025. ISSN 1742-6596

Gorash, Yevgen and Comlekci, Tugrul and MacKenzie, Donald (2016) Influence of material data input on accuracy of fatigue assessments for beam weldments. Proceedings in Applied Mathematics and Mechanics, PAMM, 16 (1). pp. 127-128. 90857. ISSN 1617-7061 (Unpublished)

Gorash, Yevgen and Comlekci, Tugrul and Mackenzie, Donald (2015) Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133. pp. 420-432. ISSN 1877-7058

Md Mahbubur Rahman, M and Xu, Yixiang and Lim, James and Switzer, Christine and Hamilton, Robert and Comlekci, Tugrul and Pritchard, D. (2013) Behaviour of steel portal frames in fire : Comparison of implicit and explicit finite element methods. International Journal of Structural Stability and Dynamics, 13 (4). 1250058. ISSN 0219-4554

Rahman, Mahbubur and Lim, James B.P. and Xu, Yixiang and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David (2012) Effect of column base strength on steel portal frames in fire. Proceedings of the ICE - Structures and Buildings, 166 (4). pp. 197-216. ISSN 0965-0911

Comlekci, T. and Mackenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Simple thermo-elastic-plastic models for welding distortion simulations. Journal of Materials Processing Technology, 176 (1-3). pp. 77-86. ISSN 0924-0136

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2006) Thermal distortion of stiffened plate due to fillet welds : computational and experimental investigation. Journal of Thermal Stresses, 29 (2). pp. 111-137. ISSN 0149-5739

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Design support tool for prediction of welding distortion in multiply-stiffened plate structures experimental and computational investigation. Journal of Ship Production, 21 (4). pp. 219-234. ISSN 8756-1417

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computational prediction of out-of-plane welding distortion and experimental investigation - Awarded Central Electricity Generating Board Prize. Journal of Strain Analysis for Engineering Design, 40 (2). pp. 161-176. ISSN 0309-3247

Book Section

Gorash, Yevgen and Zhou, Xingguo and Comlekci, Tugrul and Mackenzie, Donald and Bayyouk, Jacob; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Consideration of weld distortion throughout the identification of fatigue curve parameters using mean stress correction. In: FATIGUE 2017. Engineering Integrity Society, GBR, pp. 366-377. ISBN 9780954436834

Okorokov, Volodymyr and Comlekci, Tugrul and MacKenzie, Donald and van Rijswick, Ralph and Gorash, Yevgen; Bailey, P. and Berto, F. and Cawte, E.R. and Roberts, P. and Whittaker, M.T. and Yates, J.R., eds. (2017) Implementation of plasticity model for a steel with mixed cyclic softening and hardening and its application to fatigue assessments. In: Fatigue 2017 Proceedings of the 7th Engineering Integrity Society International Conference on Durability & Fatigue. Engineering Integrity Society, GBR, pp. 72-81. ISBN 9780954436834

Rahman, Mahbubur and Lim, James and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David and Xu, Yixiang; (2009) An investigation of overturning moments of portal frames at elevated temperatures. In: Proceedings of International Conference Applications of Structural Fire Engineering. EuroFire Engineering. ISBN 978-80-01-04266-3

Camilleri, D. and Mollicone, P. and Comlekci, T. and Gray, T.G.F.; Armstrong, Cecil, ed. (2006) Computational methods for the prediction of out-of-plane deformation in thin plate welded structures. In: Computational Mechanics in the UK: Proceedings of a Joint Conference of The Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineering Computation. Queen's University Belfast, pp. 7-10.

Camilleri, D. and Comlekci, T. and Gray, T.G.F.; (2005) Finite element analysis of out-of-plane distortion in plates due to double-sided fillet-welded attachments. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005, Malta. NAFEMS, p. 88. ISBN 1-874376-03-4

Camilleri, D. and Gray, T.G.F. and Comlekci, T.; (2004) Use of thermography to calibrate fusion welding procedures in virtual fabrication applications. In: InfraMation 2004. Infrared Training Centre.

Comlekci, T. and Camilleri, D. and Gray, T.G.F.; (2003) Finite element representation on experimental surface deformation data from fusion welded plates. In: Computational Mechanics in the UK : proceedings of the 11th ACME-UK 2003 Conference. University of Strathclyde, Glasgow, UK, pp. 33-36.

Conference or Workshop Item

Gorash, Yevgen and Comlekci, Tugrul and Styger, Gary and Kelly, James and Brownlie, Frazer (2021) Investigation of S275JR+AR structural steel fatigue performance in very high cycle domain. In: 8th International Conference on Very High Cycle Fatigue, 2021-07-05 - 2021-07-09, Online & on-demand.

Connolly, Stephen John and MacKenzie, Donald and Comlekci, Tugrul (2017) Multi-objective optimization of hyperelastic material constants : a feasibility study. In: 10th European Conference on Constitutive Models for Rubbers, 2017-08-28 - 2018-08-02.

Rahman, M. and Lim, J. and Hamilton, Robert and Comlekci, Tugrul (2009) Dynamic behaviour of portal frames at elevated temperature. In: Simulea Customer Conference, 2009-05-18 - 2009-05-21.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Computationally efficient welding simulation for out-of-plane distortion in double-sided fillet welding. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Mollicone, P. and Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) Thermo-elastic-plastic finite element models for gas-shielded metal-arc welding fabrication. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Camilleri, D. and Comlekci, T. and Gray, T.G.F. (2005) The development of procedural benchmarks for modelling common fabrication details in plate/shell structures. In: 2005 International Conference on Computer Aided Engineering and Computational Technologies for Industry, 2005-10-05 - 2005-10-08.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Tan, H.C.P. and Gray, T.G.F. (2003) Investigation of temperature transients during flux-cored CO2 butt welding of CMn steel plates. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.

Camilleri, D. and Comlekci, T. and Lee, C.K. and Gray, T.G.F. (2003) Out-of-plane distortion of CMn steel plates during flux-cored CO2 automatic butt welding. In: International Conference on Metal Fabrication and Welding Technology and European Symposium on Manufacturing and Modelling of Fabricated Structural Components, 2003-09-16 - 2003-09-18, University of Nottingham.